| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <stdint.h> |
| #include <math.h> |
| #include <sys/types.h> |
| |
| #include <cutils/properties.h> |
| |
| #include <utils/SortedVector.h> |
| #include <utils/KeyedVector.h> |
| #include <utils/threads.h> |
| #include <utils/Atomic.h> |
| #include <utils/Errors.h> |
| #include <utils/RefBase.h> |
| #include <utils/Singleton.h> |
| #include <utils/String16.h> |
| |
| #include <binder/BinderService.h> |
| #include <binder/IServiceManager.h> |
| #include <binder/PermissionCache.h> |
| |
| #include <gui/ISensorServer.h> |
| #include <gui/ISensorEventConnection.h> |
| |
| #include <hardware/sensors.h> |
| |
| #include "CorrectedGyroSensor.h" |
| #include "GravitySensor.h" |
| #include "LinearAccelerationSensor.h" |
| #include "OrientationSensor.h" |
| #include "RotationVectorSensor.h" |
| #include "SensorFusion.h" |
| #include "SensorService.h" |
| |
| namespace android { |
| // --------------------------------------------------------------------------- |
| |
| /* |
| * Notes: |
| * |
| * - what about a gyro-corrected magnetic-field sensor? |
| * - run mag sensor from time to time to force calibration |
| * - gravity sensor length is wrong (=> drift in linear-acc sensor) |
| * |
| */ |
| |
| SensorService::SensorService() |
| : mInitCheck(NO_INIT) |
| { |
| } |
| |
| void SensorService::onFirstRef() |
| { |
| ALOGD("nuSensorService starting..."); |
| |
| SensorDevice& dev(SensorDevice::getInstance()); |
| |
| if (dev.initCheck() == NO_ERROR) { |
| sensor_t const* list; |
| ssize_t count = dev.getSensorList(&list); |
| if (count > 0) { |
| ssize_t orientationIndex = -1; |
| bool hasGyro = false; |
| uint32_t virtualSensorsNeeds = |
| (1<<SENSOR_TYPE_GRAVITY) | |
| (1<<SENSOR_TYPE_LINEAR_ACCELERATION) | |
| (1<<SENSOR_TYPE_ROTATION_VECTOR); |
| |
| mLastEventSeen.setCapacity(count); |
| for (ssize_t i=0 ; i<count ; i++) { |
| registerSensor( new HardwareSensor(list[i]) ); |
| switch (list[i].type) { |
| case SENSOR_TYPE_ORIENTATION: |
| orientationIndex = i; |
| break; |
| case SENSOR_TYPE_GYROSCOPE: |
| hasGyro = true; |
| break; |
| case SENSOR_TYPE_GRAVITY: |
| case SENSOR_TYPE_LINEAR_ACCELERATION: |
| case SENSOR_TYPE_ROTATION_VECTOR: |
| virtualSensorsNeeds &= ~(1<<list[i].type); |
| break; |
| } |
| } |
| |
| // it's safe to instantiate the SensorFusion object here |
| // (it wants to be instantiated after h/w sensors have been |
| // registered) |
| const SensorFusion& fusion(SensorFusion::getInstance()); |
| |
| if (hasGyro) { |
| // Always instantiate Android's virtual sensors. Since they are |
| // instantiated behind sensors from the HAL, they won't |
| // interfere with applications, unless they looks specifically |
| // for them (by name). |
| |
| registerVirtualSensor( new RotationVectorSensor() ); |
| registerVirtualSensor( new GravitySensor(list, count) ); |
| registerVirtualSensor( new LinearAccelerationSensor(list, count) ); |
| |
| // these are optional |
| registerVirtualSensor( new OrientationSensor() ); |
| registerVirtualSensor( new CorrectedGyroSensor(list, count) ); |
| |
| // virtual debugging sensors... |
| char value[PROPERTY_VALUE_MAX]; |
| property_get("debug.sensors", value, "0"); |
| if (atoi(value)) { |
| registerVirtualSensor( new GyroDriftSensor() ); |
| } |
| } |
| |
| // build the sensor list returned to users |
| mUserSensorList = mSensorList; |
| if (hasGyro && |
| (virtualSensorsNeeds & (1<<SENSOR_TYPE_ROTATION_VECTOR))) { |
| // if we have the fancy sensor fusion, and it's not provided by the |
| // HAL, use our own (fused) orientation sensor by removing the |
| // HAL supplied one form the user list. |
| if (orientationIndex >= 0) { |
| mUserSensorList.removeItemsAt(orientationIndex); |
| } |
| } |
| |
| run("SensorService", PRIORITY_URGENT_DISPLAY); |
| mInitCheck = NO_ERROR; |
| } |
| } |
| } |
| |
| void SensorService::registerSensor(SensorInterface* s) |
| { |
| sensors_event_t event; |
| memset(&event, 0, sizeof(event)); |
| |
| const Sensor sensor(s->getSensor()); |
| // add to the sensor list (returned to clients) |
| mSensorList.add(sensor); |
| // add to our handle->SensorInterface mapping |
| mSensorMap.add(sensor.getHandle(), s); |
| // create an entry in the mLastEventSeen array |
| mLastEventSeen.add(sensor.getHandle(), event); |
| } |
| |
| void SensorService::registerVirtualSensor(SensorInterface* s) |
| { |
| registerSensor(s); |
| mVirtualSensorList.add( s ); |
| } |
| |
| SensorService::~SensorService() |
| { |
| for (size_t i=0 ; i<mSensorMap.size() ; i++) |
| delete mSensorMap.valueAt(i); |
| } |
| |
| static const String16 sDump("android.permission.DUMP"); |
| |
| status_t SensorService::dump(int fd, const Vector<String16>& args) |
| { |
| const size_t SIZE = 1024; |
| char buffer[SIZE]; |
| String8 result; |
| if (!PermissionCache::checkCallingPermission(sDump)) { |
| snprintf(buffer, SIZE, "Permission Denial: " |
| "can't dump SurfaceFlinger from pid=%d, uid=%d\n", |
| IPCThreadState::self()->getCallingPid(), |
| IPCThreadState::self()->getCallingUid()); |
| result.append(buffer); |
| } else { |
| Mutex::Autolock _l(mLock); |
| snprintf(buffer, SIZE, "Sensor List:\n"); |
| result.append(buffer); |
| for (size_t i=0 ; i<mSensorList.size() ; i++) { |
| const Sensor& s(mSensorList[i]); |
| const sensors_event_t& e(mLastEventSeen.valueFor(s.getHandle())); |
| snprintf(buffer, SIZE, |
| "%-48s| %-32s | 0x%08x | maxRate=%7.2fHz | " |
| "last=<%5.1f,%5.1f,%5.1f>\n", |
| s.getName().string(), |
| s.getVendor().string(), |
| s.getHandle(), |
| s.getMinDelay() ? (1000000.0f / s.getMinDelay()) : 0.0f, |
| e.data[0], e.data[1], e.data[2]); |
| result.append(buffer); |
| } |
| SensorFusion::getInstance().dump(result, buffer, SIZE); |
| SensorDevice::getInstance().dump(result, buffer, SIZE); |
| |
| snprintf(buffer, SIZE, "%d active connections\n", |
| mActiveConnections.size()); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "Active sensors:\n"); |
| result.append(buffer); |
| for (size_t i=0 ; i<mActiveSensors.size() ; i++) { |
| int handle = mActiveSensors.keyAt(i); |
| snprintf(buffer, SIZE, "%s (handle=0x%08x, connections=%d)\n", |
| getSensorName(handle).string(), |
| handle, |
| mActiveSensors.valueAt(i)->getNumConnections()); |
| result.append(buffer); |
| } |
| } |
| write(fd, result.string(), result.size()); |
| return NO_ERROR; |
| } |
| |
| bool SensorService::threadLoop() |
| { |
| ALOGD("nuSensorService thread starting..."); |
| |
| const size_t numEventMax = 16 * (1 + mVirtualSensorList.size()); |
| sensors_event_t buffer[numEventMax]; |
| sensors_event_t scratch[numEventMax]; |
| SensorDevice& device(SensorDevice::getInstance()); |
| const size_t vcount = mVirtualSensorList.size(); |
| |
| ssize_t count; |
| do { |
| count = device.poll(buffer, numEventMax); |
| if (count<0) { |
| ALOGE("sensor poll failed (%s)", strerror(-count)); |
| break; |
| } |
| |
| recordLastValue(buffer, count); |
| |
| // handle virtual sensors |
| if (count && vcount) { |
| sensors_event_t const * const event = buffer; |
| const DefaultKeyedVector<int, SensorInterface*> virtualSensors( |
| getActiveVirtualSensors()); |
| const size_t activeVirtualSensorCount = virtualSensors.size(); |
| if (activeVirtualSensorCount) { |
| size_t k = 0; |
| SensorFusion& fusion(SensorFusion::getInstance()); |
| if (fusion.isEnabled()) { |
| for (size_t i=0 ; i<size_t(count) ; i++) { |
| fusion.process(event[i]); |
| } |
| } |
| for (size_t i=0 ; i<size_t(count) ; i++) { |
| for (size_t j=0 ; j<activeVirtualSensorCount ; j++) { |
| sensors_event_t out; |
| if (virtualSensors.valueAt(j)->process(&out, event[i])) { |
| buffer[count + k] = out; |
| k++; |
| } |
| } |
| } |
| if (k) { |
| // record the last synthesized values |
| recordLastValue(&buffer[count], k); |
| count += k; |
| // sort the buffer by time-stamps |
| sortEventBuffer(buffer, count); |
| } |
| } |
| } |
| |
| // send our events to clients... |
| const SortedVector< wp<SensorEventConnection> > activeConnections( |
| getActiveConnections()); |
| size_t numConnections = activeConnections.size(); |
| for (size_t i=0 ; i<numConnections ; i++) { |
| sp<SensorEventConnection> connection( |
| activeConnections[i].promote()); |
| if (connection != 0) { |
| connection->sendEvents(buffer, count, scratch); |
| } |
| } |
| } while (count >= 0 || Thread::exitPending()); |
| |
| ALOGW("Exiting SensorService::threadLoop => aborting..."); |
| abort(); |
| return false; |
| } |
| |
| void SensorService::recordLastValue( |
| sensors_event_t const * buffer, size_t count) |
| { |
| Mutex::Autolock _l(mLock); |
| |
| // record the last event for each sensor |
| int32_t prev = buffer[0].sensor; |
| for (size_t i=1 ; i<count ; i++) { |
| // record the last event of each sensor type in this buffer |
| int32_t curr = buffer[i].sensor; |
| if (curr != prev) { |
| mLastEventSeen.editValueFor(prev) = buffer[i-1]; |
| prev = curr; |
| } |
| } |
| mLastEventSeen.editValueFor(prev) = buffer[count-1]; |
| } |
| |
| void SensorService::sortEventBuffer(sensors_event_t* buffer, size_t count) |
| { |
| struct compar { |
| static int cmp(void const* lhs, void const* rhs) { |
| sensors_event_t const* l = static_cast<sensors_event_t const*>(lhs); |
| sensors_event_t const* r = static_cast<sensors_event_t const*>(rhs); |
| return r->timestamp - l->timestamp; |
| } |
| }; |
| qsort(buffer, count, sizeof(sensors_event_t), compar::cmp); |
| } |
| |
| SortedVector< wp<SensorService::SensorEventConnection> > |
| SensorService::getActiveConnections() const |
| { |
| Mutex::Autolock _l(mLock); |
| return mActiveConnections; |
| } |
| |
| DefaultKeyedVector<int, SensorInterface*> |
| SensorService::getActiveVirtualSensors() const |
| { |
| Mutex::Autolock _l(mLock); |
| return mActiveVirtualSensors; |
| } |
| |
| String8 SensorService::getSensorName(int handle) const { |
| size_t count = mUserSensorList.size(); |
| for (size_t i=0 ; i<count ; i++) { |
| const Sensor& sensor(mUserSensorList[i]); |
| if (sensor.getHandle() == handle) { |
| return sensor.getName(); |
| } |
| } |
| String8 result("unknown"); |
| return result; |
| } |
| |
| Vector<Sensor> SensorService::getSensorList() |
| { |
| return mUserSensorList; |
| } |
| |
| sp<ISensorEventConnection> SensorService::createSensorEventConnection() |
| { |
| sp<SensorEventConnection> result(new SensorEventConnection(this)); |
| return result; |
| } |
| |
| void SensorService::cleanupConnection(SensorEventConnection* c) |
| { |
| Mutex::Autolock _l(mLock); |
| const wp<SensorEventConnection> connection(c); |
| size_t size = mActiveSensors.size(); |
| ALOGD_IF(DEBUG_CONNECTIONS, "%d active sensors", size); |
| for (size_t i=0 ; i<size ; ) { |
| int handle = mActiveSensors.keyAt(i); |
| if (c->hasSensor(handle)) { |
| ALOGD_IF(DEBUG_CONNECTIONS, "%i: disabling handle=0x%08x", i, handle); |
| SensorInterface* sensor = mSensorMap.valueFor( handle ); |
| ALOGE_IF(!sensor, "mSensorMap[handle=0x%08x] is null!", handle); |
| if (sensor) { |
| sensor->activate(c, false); |
| } |
| } |
| SensorRecord* rec = mActiveSensors.valueAt(i); |
| ALOGE_IF(!rec, "mActiveSensors[%d] is null (handle=0x%08x)!", i, handle); |
| ALOGD_IF(DEBUG_CONNECTIONS, |
| "removing connection %p for sensor[%d].handle=0x%08x", |
| c, i, handle); |
| |
| if (rec && rec->removeConnection(connection)) { |
| ALOGD_IF(DEBUG_CONNECTIONS, "... and it was the last connection"); |
| mActiveSensors.removeItemsAt(i, 1); |
| mActiveVirtualSensors.removeItem(handle); |
| delete rec; |
| size--; |
| } else { |
| i++; |
| } |
| } |
| mActiveConnections.remove(connection); |
| } |
| |
| status_t SensorService::enable(const sp<SensorEventConnection>& connection, |
| int handle) |
| { |
| if (mInitCheck != NO_ERROR) |
| return mInitCheck; |
| |
| Mutex::Autolock _l(mLock); |
| SensorInterface* sensor = mSensorMap.valueFor(handle); |
| status_t err = sensor ? sensor->activate(connection.get(), true) : status_t(BAD_VALUE); |
| if (err == NO_ERROR) { |
| SensorRecord* rec = mActiveSensors.valueFor(handle); |
| if (rec == 0) { |
| rec = new SensorRecord(connection); |
| mActiveSensors.add(handle, rec); |
| if (sensor->isVirtual()) { |
| mActiveVirtualSensors.add(handle, sensor); |
| } |
| } else { |
| if (rec->addConnection(connection)) { |
| // this sensor is already activated, but we are adding a |
| // connection that uses it. Immediately send down the last |
| // known value of the requested sensor if it's not a |
| // "continuous" sensor. |
| if (sensor->getSensor().getMinDelay() == 0) { |
| sensors_event_t scratch; |
| sensors_event_t& event(mLastEventSeen.editValueFor(handle)); |
| if (event.version == sizeof(sensors_event_t)) { |
| connection->sendEvents(&event, 1); |
| } |
| } |
| } |
| } |
| if (err == NO_ERROR) { |
| // connection now active |
| if (connection->addSensor(handle)) { |
| // the sensor was added (which means it wasn't already there) |
| // so, see if this connection becomes active |
| if (mActiveConnections.indexOf(connection) < 0) { |
| mActiveConnections.add(connection); |
| } |
| } |
| } |
| } |
| return err; |
| } |
| |
| status_t SensorService::disable(const sp<SensorEventConnection>& connection, |
| int handle) |
| { |
| if (mInitCheck != NO_ERROR) |
| return mInitCheck; |
| |
| status_t err = NO_ERROR; |
| Mutex::Autolock _l(mLock); |
| SensorRecord* rec = mActiveSensors.valueFor(handle); |
| if (rec) { |
| // see if this connection becomes inactive |
| connection->removeSensor(handle); |
| if (connection->hasAnySensor() == false) { |
| mActiveConnections.remove(connection); |
| } |
| // see if this sensor becomes inactive |
| if (rec->removeConnection(connection)) { |
| mActiveSensors.removeItem(handle); |
| mActiveVirtualSensors.removeItem(handle); |
| delete rec; |
| } |
| SensorInterface* sensor = mSensorMap.valueFor(handle); |
| err = sensor ? sensor->activate(connection.get(), false) : status_t(BAD_VALUE); |
| } |
| return err; |
| } |
| |
| status_t SensorService::setEventRate(const sp<SensorEventConnection>& connection, |
| int handle, nsecs_t ns) |
| { |
| if (mInitCheck != NO_ERROR) |
| return mInitCheck; |
| |
| SensorInterface* sensor = mSensorMap.valueFor(handle); |
| if (!sensor) |
| return BAD_VALUE; |
| |
| if (ns < 0) |
| return BAD_VALUE; |
| |
| nsecs_t minDelayNs = sensor->getSensor().getMinDelayNs(); |
| if (ns < minDelayNs) { |
| ns = minDelayNs; |
| } |
| |
| if (ns < MINIMUM_EVENTS_PERIOD) |
| ns = MINIMUM_EVENTS_PERIOD; |
| |
| return sensor->setDelay(connection.get(), handle, ns); |
| } |
| |
| // --------------------------------------------------------------------------- |
| |
| SensorService::SensorRecord::SensorRecord( |
| const sp<SensorEventConnection>& connection) |
| { |
| mConnections.add(connection); |
| } |
| |
| bool SensorService::SensorRecord::addConnection( |
| const sp<SensorEventConnection>& connection) |
| { |
| if (mConnections.indexOf(connection) < 0) { |
| mConnections.add(connection); |
| return true; |
| } |
| return false; |
| } |
| |
| bool SensorService::SensorRecord::removeConnection( |
| const wp<SensorEventConnection>& connection) |
| { |
| ssize_t index = mConnections.indexOf(connection); |
| if (index >= 0) { |
| mConnections.removeItemsAt(index, 1); |
| } |
| return mConnections.size() ? false : true; |
| } |
| |
| // --------------------------------------------------------------------------- |
| |
| SensorService::SensorEventConnection::SensorEventConnection( |
| const sp<SensorService>& service) |
| : mService(service), mChannel(new BitTube()) |
| { |
| } |
| |
| SensorService::SensorEventConnection::~SensorEventConnection() |
| { |
| ALOGD_IF(DEBUG_CONNECTIONS, "~SensorEventConnection(%p)", this); |
| mService->cleanupConnection(this); |
| } |
| |
| void SensorService::SensorEventConnection::onFirstRef() |
| { |
| } |
| |
| bool SensorService::SensorEventConnection::addSensor(int32_t handle) { |
| Mutex::Autolock _l(mConnectionLock); |
| if (mSensorInfo.indexOf(handle) <= 0) { |
| mSensorInfo.add(handle); |
| return true; |
| } |
| return false; |
| } |
| |
| bool SensorService::SensorEventConnection::removeSensor(int32_t handle) { |
| Mutex::Autolock _l(mConnectionLock); |
| if (mSensorInfo.remove(handle) >= 0) { |
| return true; |
| } |
| return false; |
| } |
| |
| bool SensorService::SensorEventConnection::hasSensor(int32_t handle) const { |
| Mutex::Autolock _l(mConnectionLock); |
| return mSensorInfo.indexOf(handle) >= 0; |
| } |
| |
| bool SensorService::SensorEventConnection::hasAnySensor() const { |
| Mutex::Autolock _l(mConnectionLock); |
| return mSensorInfo.size() ? true : false; |
| } |
| |
| status_t SensorService::SensorEventConnection::sendEvents( |
| sensors_event_t const* buffer, size_t numEvents, |
| sensors_event_t* scratch) |
| { |
| // filter out events not for this connection |
| size_t count = 0; |
| if (scratch) { |
| Mutex::Autolock _l(mConnectionLock); |
| size_t i=0; |
| while (i<numEvents) { |
| const int32_t curr = buffer[i].sensor; |
| if (mSensorInfo.indexOf(curr) >= 0) { |
| do { |
| scratch[count++] = buffer[i++]; |
| } while ((i<numEvents) && (buffer[i].sensor == curr)); |
| } else { |
| i++; |
| } |
| } |
| } else { |
| scratch = const_cast<sensors_event_t *>(buffer); |
| count = numEvents; |
| } |
| |
| if (count == 0) |
| return 0; |
| |
| ssize_t size = mChannel->write(scratch, count*sizeof(sensors_event_t)); |
| if (size == -EAGAIN) { |
| // the destination doesn't accept events anymore, it's probably |
| // full. For now, we just drop the events on the floor. |
| //ALOGW("dropping %d events on the floor", count); |
| return size; |
| } |
| |
| //ALOGE_IF(size<0, "dropping %d events on the floor (%s)", |
| // count, strerror(-size)); |
| |
| return size < 0 ? status_t(size) : status_t(NO_ERROR); |
| } |
| |
| sp<BitTube> SensorService::SensorEventConnection::getSensorChannel() const |
| { |
| return mChannel; |
| } |
| |
| status_t SensorService::SensorEventConnection::enableDisable( |
| int handle, bool enabled) |
| { |
| status_t err; |
| if (enabled) { |
| err = mService->enable(this, handle); |
| } else { |
| err = mService->disable(this, handle); |
| } |
| return err; |
| } |
| |
| status_t SensorService::SensorEventConnection::setEventRate( |
| int handle, nsecs_t ns) |
| { |
| return mService->setEventRate(this, handle, ns); |
| } |
| |
| // --------------------------------------------------------------------------- |
| }; // namespace android |
| |