| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.media; |
| |
| import android.annotation.IntDef; |
| import android.annotation.UnsupportedAppUsage; |
| |
| import java.lang.annotation.Retention; |
| import java.lang.annotation.RetentionPolicy; |
| import java.nio.ByteBuffer; |
| import java.util.HashMap; |
| import java.util.Map; |
| |
| /** |
| * Encapsulates the information describing the format of media data, |
| * be it audio or video. |
| * |
| * The format of the media data is specified as string/value pairs. |
| * |
| * Keys common to all audio/video formats, <b>all keys not marked optional are mandatory</b>: |
| * |
| * <table> |
| * <tr><th>Name</th><th>Value Type</th><th>Description</th></tr> |
| * <tr><td>{@link #KEY_MIME}</td><td>String</td><td>The type of the format.</td></tr> |
| * <tr><td>{@link #KEY_MAX_INPUT_SIZE}</td><td>Integer</td><td>optional, maximum size of a buffer of input data</td></tr> |
| * <tr><td>{@link #KEY_BIT_RATE}</td><td>Integer</td><td><b>encoder-only</b>, desired bitrate in bits/second</td></tr> |
| * </table> |
| * |
| * Video formats have the following keys: |
| * <table> |
| * <tr><th>Name</th><th>Value Type</th><th>Description</th></tr> |
| * <tr><td>{@link #KEY_WIDTH}</td><td>Integer</td><td></td></tr> |
| * <tr><td>{@link #KEY_HEIGHT}</td><td>Integer</td><td></td></tr> |
| * <tr><td>{@link #KEY_COLOR_FORMAT}</td><td>Integer</td><td>set by the user |
| * for encoders, readable in the output format of decoders</b></td></tr> |
| * <tr><td>{@link #KEY_FRAME_RATE}</td><td>Integer or Float</td><td>required for <b>encoders</b>, |
| * optional for <b>decoders</b></td></tr> |
| * <tr><td>{@link #KEY_CAPTURE_RATE}</td><td>Integer</td><td></td></tr> |
| * <tr><td>{@link #KEY_I_FRAME_INTERVAL}</td><td>Integer (or Float)</td><td><b>encoder-only</b>, |
| * time-interval between key frames. |
| * Float support added in {@link android.os.Build.VERSION_CODES#N_MR1}</td></tr> |
| * <tr><td>{@link #KEY_INTRA_REFRESH_PERIOD}</td><td>Integer</td><td><b>encoder-only</b>, optional</td></tr> |
| * <tr><td>{@link #KEY_LATENCY}</td><td>Integer</td><td><b>encoder-only</b>, optional</td></tr> |
| * <tr><td>{@link #KEY_MAX_WIDTH}</td><td>Integer</td><td><b>decoder-only</b>, optional, max-resolution width</td></tr> |
| * <tr><td>{@link #KEY_MAX_HEIGHT}</td><td>Integer</td><td><b>decoder-only</b>, optional, max-resolution height</td></tr> |
| * <tr><td>{@link #KEY_REPEAT_PREVIOUS_FRAME_AFTER}</td><td>Long</td><td><b>encoder in surface-mode |
| * only</b>, optional</td></tr> |
| * <tr><td>{@link #KEY_PUSH_BLANK_BUFFERS_ON_STOP}</td><td>Integer(1)</td><td><b>decoder rendering |
| * to a surface only</b>, optional</td></tr> |
| * <tr><td>{@link #KEY_TEMPORAL_LAYERING}</td><td>String</td><td><b>encoder only</b>, optional, |
| * temporal-layering schema</td></tr> |
| * </table> |
| * Specify both {@link #KEY_MAX_WIDTH} and {@link #KEY_MAX_HEIGHT} to enable |
| * adaptive playback (seamless resolution change) for a video decoder that |
| * supports it ({@link MediaCodecInfo.CodecCapabilities#FEATURE_AdaptivePlayback}). |
| * The values are used as hints for the codec: they are the maximum expected |
| * resolution to prepare for. Depending on codec support, preparing for larger |
| * maximum resolution may require more memory even if that resolution is never |
| * reached. These fields have no effect for codecs that do not support adaptive |
| * playback.<br /><br /> |
| * |
| * Audio formats have the following keys: |
| * <table> |
| * <tr><th>Name</th><th>Value Type</th><th>Description</th></tr> |
| * <tr><td>{@link #KEY_CHANNEL_COUNT}</td><td>Integer</td><td></td></tr> |
| * <tr><td>{@link #KEY_SAMPLE_RATE}</td><td>Integer</td><td></td></tr> |
| * <tr><td>{@link #KEY_PCM_ENCODING}</td><td>Integer</td><td>optional</td></tr> |
| * <tr><td>{@link #KEY_IS_ADTS}</td><td>Integer</td><td>optional, if <em>decoding</em> AAC audio content, setting this key to 1 indicates that each audio frame is prefixed by the ADTS header.</td></tr> |
| * <tr><td>{@link #KEY_AAC_PROFILE}</td><td>Integer</td><td><b>encoder-only</b>, optional, if content is AAC audio, specifies the desired profile.</td></tr> |
| * <tr><td>{@link #KEY_AAC_SBR_MODE}</td><td>Integer</td><td><b>encoder-only</b>, optional, if content is AAC audio, specifies the desired SBR mode.</td></tr> |
| * <tr><td>{@link #KEY_AAC_DRC_TARGET_REFERENCE_LEVEL}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the target reference level.</td></tr> |
| * <tr><td>{@link #KEY_AAC_ENCODED_TARGET_LEVEL}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the target reference level used at encoder.</td></tr> |
| * <tr><td>{@link #KEY_AAC_DRC_BOOST_FACTOR}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the DRC boost factor.</td></tr> |
| * <tr><td>{@link #KEY_AAC_DRC_ATTENUATION_FACTOR}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the DRC attenuation factor.</td></tr> |
| * <tr><td>{@link #KEY_AAC_DRC_HEAVY_COMPRESSION}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies whether to use heavy compression.</td></tr> |
| * <tr><td>{@link #KEY_AAC_MAX_OUTPUT_CHANNEL_COUNT}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the maximum number of channels the decoder outputs.</td></tr> |
| * <tr><td>{@link #KEY_AAC_DRC_EFFECT_TYPE}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the MPEG-D DRC effect type to use.</td></tr> |
| * <tr><td>{@link #KEY_CHANNEL_MASK}</td><td>Integer</td><td>optional, a mask of audio channel assignments</td></tr> |
| * <tr><td>{@link #KEY_FLAC_COMPRESSION_LEVEL}</td><td>Integer</td><td><b>encoder-only</b>, optional, if content is FLAC audio, specifies the desired compression level.</td></tr> |
| * </table> |
| * |
| * Subtitle formats have the following keys: |
| * <table> |
| * <tr><td>{@link #KEY_MIME}</td><td>String</td><td>The type of the format.</td></tr> |
| * <tr><td>{@link #KEY_LANGUAGE}</td><td>String</td><td>The language of the content.</td></tr> |
| * </table> |
| * |
| * Image formats have the following keys: |
| * <table> |
| * <tr><td>{@link #KEY_MIME}</td><td>String</td><td>The type of the format.</td></tr> |
| * <tr><td>{@link #KEY_WIDTH}</td><td>Integer</td><td></td></tr> |
| * <tr><td>{@link #KEY_HEIGHT}</td><td>Integer</td><td></td></tr> |
| * <tr><td>{@link #KEY_COLOR_FORMAT}</td><td>Integer</td><td>set by the user |
| * for encoders, readable in the output format of decoders</b></td></tr> |
| * <tr><td>{@link #KEY_TILE_WIDTH}</td><td>Integer</td><td>required if the image has grid</td></tr> |
| * <tr><td>{@link #KEY_TILE_HEIGHT}</td><td>Integer</td><td>required if the image has grid</td></tr> |
| * <tr><td>{@link #KEY_GRID_ROWS}</td><td>Integer</td><td>required if the image has grid</td></tr> |
| * <tr><td>{@link #KEY_GRID_COLUMNS}</td><td>Integer</td><td>required if the image has grid</td></tr> |
| * </table> |
| */ |
| public final class MediaFormat { |
| public static final String MIMETYPE_VIDEO_VP8 = "video/x-vnd.on2.vp8"; |
| public static final String MIMETYPE_VIDEO_VP9 = "video/x-vnd.on2.vp9"; |
| public static final String MIMETYPE_VIDEO_AVC = "video/avc"; |
| public static final String MIMETYPE_VIDEO_HEVC = "video/hevc"; |
| public static final String MIMETYPE_VIDEO_MPEG4 = "video/mp4v-es"; |
| public static final String MIMETYPE_VIDEO_H263 = "video/3gpp"; |
| public static final String MIMETYPE_VIDEO_MPEG2 = "video/mpeg2"; |
| public static final String MIMETYPE_VIDEO_RAW = "video/raw"; |
| public static final String MIMETYPE_VIDEO_DOLBY_VISION = "video/dolby-vision"; |
| public static final String MIMETYPE_VIDEO_SCRAMBLED = "video/scrambled"; |
| |
| public static final String MIMETYPE_AUDIO_AMR_NB = "audio/3gpp"; |
| public static final String MIMETYPE_AUDIO_AMR_WB = "audio/amr-wb"; |
| public static final String MIMETYPE_AUDIO_MPEG = "audio/mpeg"; |
| public static final String MIMETYPE_AUDIO_AAC = "audio/mp4a-latm"; |
| public static final String MIMETYPE_AUDIO_QCELP = "audio/qcelp"; |
| public static final String MIMETYPE_AUDIO_VORBIS = "audio/vorbis"; |
| public static final String MIMETYPE_AUDIO_OPUS = "audio/opus"; |
| public static final String MIMETYPE_AUDIO_G711_ALAW = "audio/g711-alaw"; |
| public static final String MIMETYPE_AUDIO_G711_MLAW = "audio/g711-mlaw"; |
| public static final String MIMETYPE_AUDIO_RAW = "audio/raw"; |
| public static final String MIMETYPE_AUDIO_FLAC = "audio/flac"; |
| public static final String MIMETYPE_AUDIO_MSGSM = "audio/gsm"; |
| public static final String MIMETYPE_AUDIO_AC3 = "audio/ac3"; |
| public static final String MIMETYPE_AUDIO_EAC3 = "audio/eac3"; |
| public static final String MIMETYPE_AUDIO_SCRAMBLED = "audio/scrambled"; |
| |
| /** |
| * MIME type for HEIF still image data encoded in HEVC. |
| * |
| * To decode such an image, {@link MediaCodec} decoder for |
| * {@ #MIMETYPE_VIDEO_HEVC} shall be used. The client needs to form |
| * the correct {@link #MediaFormat} based on additional information in |
| * the track format, and send it to {@link MediaCodec#configure}. |
| * |
| * The track's MediaFormat will come with {@link #KEY_WIDTH} and |
| * {@link #KEY_HEIGHT} keys, which describes the width and height |
| * of the image. If the image doesn't contain grid (i.e. none of |
| * {@link #KEY_TILE_WIDTH}, {@link #KEY_TILE_HEIGHT}, |
| * {@link #KEY_GRID_ROWS}, {@link #KEY_GRID_COLUMNS} are present}), the |
| * track will contain a single sample of coded data for the entire image, |
| * and the image width and height should be used to set up the decoder. |
| * |
| * If the image does come with grid, each sample from the track will |
| * contain one tile in the grid, of which the size is described by |
| * {@link #KEY_TILE_WIDTH} and {@link #KEY_TILE_HEIGHT}. This size |
| * (instead of {@link #KEY_WIDTH} and {@link #KEY_HEIGHT}) should be |
| * used to set up the decoder. The track contains {@link #KEY_GRID_ROWS} |
| * by {@link #KEY_GRID_COLUMNS} samples in row-major, top-row first, |
| * left-to-right order. The output image should be reconstructed by |
| * first tiling the decoding results of the tiles in the correct order, |
| * then trimming (before rotation is applied) on the bottom and right |
| * side, if the tiled area is larger than the image width and height. |
| */ |
| public static final String MIMETYPE_IMAGE_ANDROID_HEIC = "image/vnd.android.heic"; |
| |
| /** |
| * MIME type for WebVTT subtitle data. |
| */ |
| public static final String MIMETYPE_TEXT_VTT = "text/vtt"; |
| |
| /** |
| * MIME type for SubRip (SRT) container. |
| */ |
| public static final String MIMETYPE_TEXT_SUBRIP = "application/x-subrip"; |
| |
| /** |
| * MIME type for CEA-608 closed caption data. |
| */ |
| public static final String MIMETYPE_TEXT_CEA_608 = "text/cea-608"; |
| |
| /** |
| * MIME type for CEA-708 closed caption data. |
| */ |
| public static final String MIMETYPE_TEXT_CEA_708 = "text/cea-708"; |
| |
| @UnsupportedAppUsage |
| private Map<String, Object> mMap; |
| |
| /** |
| * A key describing the mime type of the MediaFormat. |
| * The associated value is a string. |
| */ |
| public static final String KEY_MIME = "mime"; |
| |
| /** |
| * A key describing the language of the content, using either ISO 639-1 |
| * or 639-2/T codes. The associated value is a string. |
| */ |
| public static final String KEY_LANGUAGE = "language"; |
| |
| /** |
| * A key describing the sample rate of an audio format. |
| * The associated value is an integer |
| */ |
| public static final String KEY_SAMPLE_RATE = "sample-rate"; |
| |
| /** |
| * A key describing the number of channels in an audio format. |
| * The associated value is an integer |
| */ |
| public static final String KEY_CHANNEL_COUNT = "channel-count"; |
| |
| /** |
| * A key describing the width of the content in a video format. |
| * The associated value is an integer |
| */ |
| public static final String KEY_WIDTH = "width"; |
| |
| /** |
| * A key describing the height of the content in a video format. |
| * The associated value is an integer |
| */ |
| public static final String KEY_HEIGHT = "height"; |
| |
| /** |
| * A key describing the maximum expected width of the content in a video |
| * decoder format, in case there are resolution changes in the video content. |
| * The associated value is an integer |
| */ |
| public static final String KEY_MAX_WIDTH = "max-width"; |
| |
| /** |
| * A key describing the maximum expected height of the content in a video |
| * decoder format, in case there are resolution changes in the video content. |
| * The associated value is an integer |
| */ |
| public static final String KEY_MAX_HEIGHT = "max-height"; |
| |
| /** A key describing the maximum size in bytes of a buffer of data |
| * described by this MediaFormat. |
| * The associated value is an integer |
| */ |
| public static final String KEY_MAX_INPUT_SIZE = "max-input-size"; |
| |
| /** |
| * A key describing the average bitrate in bits/sec. |
| * The associated value is an integer |
| */ |
| public static final String KEY_BIT_RATE = "bitrate"; |
| |
| /** |
| * A key describing the max bitrate in bits/sec. |
| * This is usually over a one-second sliding window (e.g. over any window of one second). |
| * The associated value is an integer |
| * @hide |
| */ |
| public static final String KEY_MAX_BIT_RATE = "max-bitrate"; |
| |
| /** |
| * A key describing the color format of the content in a video format. |
| * Constants are declared in {@link android.media.MediaCodecInfo.CodecCapabilities}. |
| */ |
| public static final String KEY_COLOR_FORMAT = "color-format"; |
| |
| /** |
| * A key describing the frame rate of a video format in frames/sec. |
| * The associated value is normally an integer when the value is used by the platform, |
| * but video codecs also accept float configuration values. |
| * Specifically, {@link MediaExtractor#getTrackFormat MediaExtractor} provides an integer |
| * value corresponding to the frame rate information of the track if specified and non-zero. |
| * Otherwise, this key is not present. {@link MediaCodec#configure MediaCodec} accepts both |
| * float and integer values. This represents the desired operating frame rate if the |
| * {@link #KEY_OPERATING_RATE} is not present and {@link #KEY_PRIORITY} is {@code 0} |
| * (realtime). For video encoders this value corresponds to the intended frame rate, |
| * although encoders are expected |
| * to support variable frame rate based on {@link MediaCodec.BufferInfo#presentationTimeUs |
| * buffer timestamp}. This key is not used in the {@code MediaCodec} |
| * {@link MediaCodec#getInputFormat input}/{@link MediaCodec#getOutputFormat output} formats, |
| * nor by {@link MediaMuxer#addTrack MediaMuxer}. |
| */ |
| public static final String KEY_FRAME_RATE = "frame-rate"; |
| |
| /** |
| * A key describing the width (in pixels) of each tile of the content in a |
| * {@link #MIMETYPE_IMAGE_ANDROID_HEIC} track. The associated value is an integer. |
| * |
| * Refer to {@link #MIMETYPE_IMAGE_ANDROID_HEIC} on decoding instructions of such tracks. |
| * |
| * @see #KEY_TILE_HEIGHT |
| * @see #KEY_GRID_ROWS |
| * @see #KEY_GRID_COLUMNS |
| */ |
| public static final String KEY_TILE_WIDTH = "tile-width"; |
| |
| /** |
| * A key describing the height (in pixels) of each tile of the content in a |
| * {@link #MIMETYPE_IMAGE_ANDROID_HEIC} track. The associated value is an integer. |
| * |
| * Refer to {@link #MIMETYPE_IMAGE_ANDROID_HEIC} on decoding instructions of such tracks. |
| * |
| * @see #KEY_TILE_WIDTH |
| * @see #KEY_GRID_ROWS |
| * @see #KEY_GRID_COLUMNS |
| */ |
| public static final String KEY_TILE_HEIGHT = "tile-height"; |
| |
| /** |
| * A key describing the number of grid rows in the content in a |
| * {@link #MIMETYPE_IMAGE_ANDROID_HEIC} track. The associated value is an integer. |
| * |
| * Refer to {@link #MIMETYPE_IMAGE_ANDROID_HEIC} on decoding instructions of such tracks. |
| * |
| * @see #KEY_TILE_WIDTH |
| * @see #KEY_TILE_HEIGHT |
| * @see #KEY_GRID_COLUMNS |
| */ |
| public static final String KEY_GRID_ROWS = "grid-rows"; |
| |
| /** |
| * A key describing the number of grid columns in the content in a |
| * {@link #MIMETYPE_IMAGE_ANDROID_HEIC} track. The associated value is an integer. |
| * |
| * Refer to {@link #MIMETYPE_IMAGE_ANDROID_HEIC} on decoding instructions of such tracks. |
| * |
| * @see #KEY_TILE_WIDTH |
| * @see #KEY_TILE_HEIGHT |
| * @see #KEY_GRID_ROWS |
| */ |
| public static final String KEY_GRID_COLUMNS = "grid-cols"; |
| |
| /** |
| * A key describing the raw audio sample encoding/format. |
| * |
| * <p>The associated value is an integer, using one of the |
| * {@link AudioFormat}.ENCODING_PCM_ values.</p> |
| * |
| * <p>This is an optional key for audio decoders and encoders specifying the |
| * desired raw audio sample format during {@link MediaCodec#configure |
| * MediaCodec.configure(…)} call. Use {@link MediaCodec#getInputFormat |
| * MediaCodec.getInput}/{@link MediaCodec#getOutputFormat OutputFormat(…)} |
| * to confirm the actual format. For the PCM decoder this key specifies both |
| * input and output sample encodings.</p> |
| * |
| * <p>This key is also used by {@link MediaExtractor} to specify the sample |
| * format of audio data, if it is specified.</p> |
| * |
| * <p>If this key is missing, the raw audio sample format is signed 16-bit short.</p> |
| */ |
| public static final String KEY_PCM_ENCODING = "pcm-encoding"; |
| |
| /** |
| * A key describing the capture rate of a video format in frames/sec. |
| * <p> |
| * When capture rate is different than the frame rate, it means that the |
| * video is acquired at a different rate than the playback, which produces |
| * slow motion or timelapse effect during playback. Application can use the |
| * value of this key to tell the relative speed ratio between capture and |
| * playback rates when the video was recorded. |
| * </p> |
| * <p> |
| * The associated value is an integer or a float. |
| * </p> |
| */ |
| public static final String KEY_CAPTURE_RATE = "capture-rate"; |
| |
| /** |
| * A key describing the frequency of key frames expressed in seconds between key frames. |
| * <p> |
| * This key is used by video encoders. |
| * A negative value means no key frames are requested after the first frame. |
| * A zero value means a stream containing all key frames is requested. |
| * <p class=note> |
| * Most video encoders will convert this value of the number of non-key-frames between |
| * key-frames, using the {@linkplain #KEY_FRAME_RATE frame rate} information; therefore, |
| * if the actual frame rate differs (e.g. input frames are dropped or the frame rate |
| * changes), the <strong>time interval</strong> between key frames will not be the |
| * configured value. |
| * <p> |
| * The associated value is an integer (or float since |
| * {@link android.os.Build.VERSION_CODES#N_MR1}). |
| */ |
| public static final String KEY_I_FRAME_INTERVAL = "i-frame-interval"; |
| |
| /** |
| * An optional key describing the period of intra refresh in frames. This is an |
| * optional parameter that applies only to video encoders. If encoder supports it |
| * ({@link MediaCodecInfo.CodecCapabilities#FEATURE_IntraRefresh}), the whole |
| * frame is completely refreshed after the specified period. Also for each frame, |
| * a fix subset of macroblocks must be intra coded which leads to more constant bitrate |
| * than inserting a key frame. This key is recommended for video streaming applications |
| * as it provides low-delay and good error-resilience. This key is ignored if the |
| * video encoder does not support the intra refresh feature. Use the output format to |
| * verify that this feature was enabled. |
| * The associated value is an integer. |
| */ |
| public static final String KEY_INTRA_REFRESH_PERIOD = "intra-refresh-period"; |
| |
| /** |
| * A key describing the temporal layering schema. This is an optional parameter |
| * that applies only to video encoders. Use {@link MediaCodec#getOutputFormat} |
| * after {@link MediaCodec#configure configure} to query if the encoder supports |
| * the desired schema. Supported values are {@code webrtc.vp8.N-layer}, |
| * {@code android.generic.N}, {@code android.generic.N+M} and {@code none}, where |
| * {@code N} denotes the total number of non-bidirectional layers (which must be at least 1) |
| * and {@code M} denotes the total number of bidirectional layers (which must be non-negative). |
| * <p class=note>{@code android.generic.*} schemas have been added in {@link |
| * android.os.Build.VERSION_CODES#N_MR1}. |
| * <p> |
| * The encoder may support fewer temporal layers, in which case the output format |
| * will contain the configured schema. If the encoder does not support temporal |
| * layering, the output format will not have an entry with this key. |
| * The associated value is a string. |
| */ |
| public static final String KEY_TEMPORAL_LAYERING = "ts-schema"; |
| |
| /** |
| * A key describing the stride of the video bytebuffer layout. |
| * Stride (or row increment) is the difference between the index of a pixel |
| * and that of the pixel directly underneath. For YUV 420 formats, the |
| * stride corresponds to the Y plane; the stride of the U and V planes can |
| * be calculated based on the color format, though it is generally undefined |
| * and depends on the device and release. |
| * The associated value is an integer, representing number of bytes. |
| */ |
| public static final String KEY_STRIDE = "stride"; |
| |
| /** |
| * A key describing the plane height of a multi-planar (YUV) video bytebuffer layout. |
| * Slice height (or plane height/vertical stride) is the number of rows that must be skipped |
| * to get from the top of the Y plane to the top of the U plane in the bytebuffer. In essence |
| * the offset of the U plane is sliceHeight * stride. The height of the U/V planes |
| * can be calculated based on the color format, though it is generally undefined |
| * and depends on the device and release. |
| * The associated value is an integer, representing number of rows. |
| */ |
| public static final String KEY_SLICE_HEIGHT = "slice-height"; |
| |
| /** |
| * Applies only when configuring a video encoder in "surface-input" mode. |
| * The associated value is a long and gives the time in microseconds |
| * after which the frame previously submitted to the encoder will be |
| * repeated (once) if no new frame became available since. |
| */ |
| public static final String KEY_REPEAT_PREVIOUS_FRAME_AFTER |
| = "repeat-previous-frame-after"; |
| |
| /** |
| * If specified when configuring a video decoder rendering to a surface, |
| * causes the decoder to output "blank", i.e. black frames to the surface |
| * when stopped to clear out any previously displayed contents. |
| * The associated value is an integer of value 1. |
| */ |
| public static final String KEY_PUSH_BLANK_BUFFERS_ON_STOP |
| = "push-blank-buffers-on-shutdown"; |
| |
| /** |
| * A key describing the duration (in microseconds) of the content. |
| * The associated value is a long. |
| */ |
| public static final String KEY_DURATION = "durationUs"; |
| |
| /** |
| * A key mapping to a value of 1 if the content is AAC audio and |
| * audio frames are prefixed with an ADTS header. |
| * The associated value is an integer (0 or 1). |
| * This key is only supported when _decoding_ content, it cannot |
| * be used to configure an encoder to emit ADTS output. |
| */ |
| public static final String KEY_IS_ADTS = "is-adts"; |
| |
| /** |
| * A key describing the channel composition of audio content. This mask |
| * is composed of bits drawn from channel mask definitions in {@link android.media.AudioFormat}. |
| * The associated value is an integer. |
| */ |
| public static final String KEY_CHANNEL_MASK = "channel-mask"; |
| |
| /** |
| * A key describing the AAC profile to be used (AAC audio formats only). |
| * Constants are declared in {@link android.media.MediaCodecInfo.CodecProfileLevel}. |
| */ |
| public static final String KEY_AAC_PROFILE = "aac-profile"; |
| |
| /** |
| * A key describing the AAC SBR mode to be used (AAC audio formats only). |
| * The associated value is an integer and can be set to following values: |
| * <ul> |
| * <li>0 - no SBR should be applied</li> |
| * <li>1 - single rate SBR</li> |
| * <li>2 - double rate SBR</li> |
| * </ul> |
| * Note: If this key is not defined the default SRB mode for the desired AAC profile will |
| * be used. |
| * <p>This key is only used during encoding. |
| */ |
| public static final String KEY_AAC_SBR_MODE = "aac-sbr-mode"; |
| |
| /** |
| * A key describing the maximum number of channels that can be output by the AAC decoder. |
| * By default, the decoder will output the same number of channels as present in the encoded |
| * stream, if supported. Set this value to limit the number of output channels, and use |
| * the downmix information in the stream, if available. |
| * <p>Values larger than the number of channels in the content to decode are ignored. |
| * <p>This key is only used during decoding. |
| */ |
| public static final String KEY_AAC_MAX_OUTPUT_CHANNEL_COUNT = "aac-max-output-channel_count"; |
| |
| /** |
| * A key describing a gain to be applied so that the output loudness matches the |
| * Target Reference Level. This is typically used to normalize loudness across program items. |
| * The gain is derived as the difference between the Target Reference Level and the |
| * Program Reference Level. The latter can be given in the bitstream and indicates the actual |
| * loudness value of the program item. |
| * <p>The Target Reference Level controls loudness normalization for both MPEG-4 DRC and |
| * MPEG-D DRC. |
| * <p>The value is given as an integer value between |
| * 40 and 127, and is calculated as -4 * Target Reference Level in LKFS. |
| * Therefore, it represents the range of -10 to -31.75 LKFS. |
| * <p>The default value on mobile devices is 64 (-16 LKFS). |
| * <p>This key is only used during decoding. |
| */ |
| public static final String KEY_AAC_DRC_TARGET_REFERENCE_LEVEL = "aac-target-ref-level"; |
| |
| /** |
| * A key describing for selecting the DRC effect type for MPEG-D DRC. |
| * The supported values are defined in ISO/IEC 23003-4:2015 and are described as follows: |
| * <table> |
| * <tr><th>Value</th><th>Effect</th></tr> |
| * <tr><th>-1</th><th>Off</th></tr> |
| * <tr><th>0</th><th>None</th></tr> |
| * <tr><th>1</th><th>Late night</th></tr> |
| * <tr><th>2</th><th>Noisy environment</th></tr> |
| * <tr><th>3</th><th>Limited playback range</th></tr> |
| * <tr><th>4</th><th>Low playback level</th></tr> |
| * <tr><th>5</th><th>Dialog enhancement</th></tr> |
| * <tr><th>6</th><th>General compression</th></tr> |
| * </table> |
| * <p>The value -1 (Off) disables DRC processing, while loudness normalization may still be |
| * active and dependent on KEY_AAC_DRC_TARGET_REFERENCE_LEVEL.<br> |
| * The value 0 (None) automatically enables DRC processing if necessary to prevent signal |
| * clipping<br> |
| * The value 6 (General compression) can be used for enabling MPEG-D DRC without particular |
| * DRC effect type request.<br> |
| * The default DRC effect type is 3 ("Limited playback range") on mobile devices. |
| * <p>This key is only used during decoding. |
| */ |
| public static final String KEY_AAC_DRC_EFFECT_TYPE = "aac-drc-effect-type"; |
| |
| /** |
| * A key describing the target reference level that was assumed at the encoder for |
| * calculation of attenuation gains for clipping prevention. |
| * <p>If it is known, this information can be provided as an integer value between |
| * 0 and 127, which is calculated as -4 * Encoded Target Level in LKFS. |
| * If the Encoded Target Level is unknown, the value can be set to -1. |
| * <p>The default value is -1 (unknown). |
| * <p>The value is ignored when heavy compression is used (see |
| * {@link #KEY_AAC_DRC_HEAVY_COMPRESSION}). |
| * <p>This key is only used during decoding. |
| */ |
| public static final String KEY_AAC_ENCODED_TARGET_LEVEL = "aac-encoded-target-level"; |
| |
| /** |
| * A key describing the boost factor allowing to adapt the dynamics of the output to the |
| * actual listening requirements. This relies on DRC gain sequences that can be transmitted in |
| * the encoded bitstream to be able to reduce the dynamics of the output signal upon request. |
| * This factor enables the user to select how much of the gains are applied. |
| * <p>Positive gains (boost) and negative gains (attenuation, see |
| * {@link #KEY_AAC_DRC_ATTENUATION_FACTOR}) can be controlled separately for a better match |
| * to different use-cases. |
| * <p>Typically, attenuation gains are sent for loud signal segments, and boost gains are sent |
| * for soft signal segments. If the output is listened to in a noisy environment, for example, |
| * the boost factor is used to enable the positive gains, i.e. to amplify soft signal segments |
| * beyond the noise floor. But for listening late at night, the attenuation |
| * factor is used to enable the negative gains, to prevent loud signal from surprising |
| * the listener. In applications which generally need a low dynamic range, both the boost factor |
| * and the attenuation factor are used in order to enable all DRC gains. |
| * <p>In order to prevent clipping, it is also recommended to apply the attenuation gains |
| * in case of a downmix and/or loudness normalization to high target reference levels. |
| * <p>Both the boost and the attenuation factor parameters are given as integer values |
| * between 0 and 127, representing the range of the factor of 0 (i.e. don't apply) |
| * to 1 (i.e. fully apply boost/attenuation gains respectively). |
| * <p>The default value is 127 (fully apply boost DRC gains). |
| * <p>This key is only used during decoding. |
| */ |
| public static final String KEY_AAC_DRC_BOOST_FACTOR = "aac-drc-boost-level"; |
| |
| /** |
| * A key describing the attenuation factor allowing to adapt the dynamics of the output to the |
| * actual listening requirements. |
| * See {@link #KEY_AAC_DRC_BOOST_FACTOR} for a description of the role of this attenuation |
| * factor and the value range. |
| * <p>The default value is 127 (fully apply attenuation DRC gains). |
| * <p>This key is only used during decoding. |
| */ |
| public static final String KEY_AAC_DRC_ATTENUATION_FACTOR = "aac-drc-cut-level"; |
| |
| /** |
| * A key describing the selection of the heavy compression profile for DRC. |
| * Two separate DRC gain sequences can be transmitted in one bitstream: MPEG-4 DRC light |
| * compression, and DVB-specific heavy compression. When selecting the application of the heavy |
| * compression, one of the sequences is selected: |
| * <ul> |
| * <li>0 enables light compression,</li> |
| * <li>1 enables heavy compression instead. |
| * </ul> |
| * Note that only light compression offers the features of scaling of DRC gains |
| * (see {@link #KEY_AAC_DRC_BOOST_FACTOR} and {@link #KEY_AAC_DRC_ATTENUATION_FACTOR} for the |
| * boost and attenuation factors, and frequency-selective (multiband) DRC. |
| * Light compression usually contains clipping prevention for stereo downmixing while heavy |
| * compression, if additionally provided in the bitstream, is usually stronger, and contains |
| * clipping prevention for stereo and mono downmixing. |
| * <p>The default is 1 (heavy compression). |
| * <p>This key is only used during decoding. |
| */ |
| public static final String KEY_AAC_DRC_HEAVY_COMPRESSION = "aac-drc-heavy-compression"; |
| |
| /** |
| * A key describing the FLAC compression level to be used (FLAC audio format only). |
| * The associated value is an integer ranging from 0 (fastest, least compression) |
| * to 8 (slowest, most compression). |
| */ |
| public static final String KEY_FLAC_COMPRESSION_LEVEL = "flac-compression-level"; |
| |
| /** |
| * A key describing the encoding complexity. |
| * The associated value is an integer. These values are device and codec specific, |
| * but lower values generally result in faster and/or less power-hungry encoding. |
| * |
| * @see MediaCodecInfo.EncoderCapabilities#getComplexityRange() |
| */ |
| public static final String KEY_COMPLEXITY = "complexity"; |
| |
| /** |
| * A key describing the desired encoding quality. |
| * The associated value is an integer. This key is only supported for encoders |
| * that are configured in constant-quality mode. These values are device and |
| * codec specific, but lower values generally result in more efficient |
| * (smaller-sized) encoding. |
| * |
| * @see MediaCodecInfo.EncoderCapabilities#getQualityRange() |
| */ |
| public static final String KEY_QUALITY = "quality"; |
| |
| /** |
| * A key describing the desired codec priority. |
| * <p> |
| * The associated value is an integer. Higher value means lower priority. |
| * <p> |
| * Currently, only two levels are supported:<br> |
| * 0: realtime priority - meaning that the codec shall support the given |
| * performance configuration (e.g. framerate) at realtime. This should |
| * only be used by media playback, capture, and possibly by realtime |
| * communication scenarios if best effort performance is not suitable.<br> |
| * 1: non-realtime priority (best effort). |
| * <p> |
| * This is a hint used at codec configuration and resource planning - to understand |
| * the realtime requirements of the application; however, due to the nature of |
| * media components, performance is not guaranteed. |
| * |
| */ |
| public static final String KEY_PRIORITY = "priority"; |
| |
| /** |
| * A key describing the desired operating frame rate for video or sample rate for audio |
| * that the codec will need to operate at. |
| * <p> |
| * The associated value is an integer or a float representing frames-per-second or |
| * samples-per-second |
| * <p> |
| * This is used for cases like high-speed/slow-motion video capture, where the video encoder |
| * format contains the target playback rate (e.g. 30fps), but the component must be able to |
| * handle the high operating capture rate (e.g. 240fps). |
| * <p> |
| * This rate will be used by codec for resource planning and setting the operating points. |
| * |
| */ |
| public static final String KEY_OPERATING_RATE = "operating-rate"; |
| |
| /** |
| * A key describing the desired profile to be used by an encoder. |
| * The associated value is an integer. |
| * Constants are declared in {@link MediaCodecInfo.CodecProfileLevel}. |
| * This key is used as a hint, and is only supported for codecs |
| * that specify a profile. Note: Codecs are free to use all the available |
| * coding tools at the specified profile. |
| * |
| * @see MediaCodecInfo.CodecCapabilities#profileLevels |
| */ |
| public static final String KEY_PROFILE = "profile"; |
| |
| /** |
| * A key describing the desired profile to be used by an encoder. |
| * The associated value is an integer. |
| * Constants are declared in {@link MediaCodecInfo.CodecProfileLevel}. |
| * This key is used as a further hint when specifying a desired profile, |
| * and is only supported for codecs that specify a level. |
| * <p> |
| * This key is ignored if the {@link #KEY_PROFILE profile} is not specified. |
| * |
| * @see MediaCodecInfo.CodecCapabilities#profileLevels |
| */ |
| public static final String KEY_LEVEL = "level"; |
| |
| /** |
| * An optional key describing the desired encoder latency in frames. This is an optional |
| * parameter that applies only to video encoders. If encoder supports it, it should ouput |
| * at least one output frame after being queued the specified number of frames. This key |
| * is ignored if the video encoder does not support the latency feature. Use the output |
| * format to verify that this feature was enabled and the actual value used by the encoder. |
| * <p> |
| * If the key is not specified, the default latency will be implenmentation specific. |
| * The associated value is an integer. |
| */ |
| public static final String KEY_LATENCY = "latency"; |
| |
| /** |
| * An optional key describing the maximum number of non-display-order coded frames. |
| * This is an optional parameter that applies only to video encoders. Application should |
| * check the value for this key in the output format to see if codec will produce |
| * non-display-order coded frames. If encoder supports it, the output frames' order will be |
| * different from the display order and each frame's display order could be retrived from |
| * {@link MediaCodec.BufferInfo#presentationTimeUs}. Before API level 27, application may |
| * receive non-display-order coded frames even though the application did not request it. |
| * Note: Application should not rearrange the frames to display order before feeding them |
| * to {@link MediaMuxer#writeSampleData}. |
| * <p> |
| * The default value is 0. |
| */ |
| public static final String KEY_OUTPUT_REORDER_DEPTH = "output-reorder-depth"; |
| |
| /** |
| * A key describing the desired clockwise rotation on an output surface. |
| * This key is only used when the codec is configured using an output surface. |
| * The associated value is an integer, representing degrees. Supported values |
| * are 0, 90, 180 or 270. This is an optional field; if not specified, rotation |
| * defaults to 0. |
| * |
| * @see MediaCodecInfo.CodecCapabilities#profileLevels |
| */ |
| public static final String KEY_ROTATION = "rotation-degrees"; |
| |
| /** |
| * A key describing the desired bitrate mode to be used by an encoder. |
| * Constants are declared in {@link MediaCodecInfo.CodecCapabilities}. |
| * |
| * @see MediaCodecInfo.EncoderCapabilities#isBitrateModeSupported(int) |
| */ |
| public static final String KEY_BITRATE_MODE = "bitrate-mode"; |
| |
| /** |
| * A key describing the audio session ID of the AudioTrack associated |
| * to a tunneled video codec. |
| * The associated value is an integer. |
| * |
| * @see MediaCodecInfo.CodecCapabilities#FEATURE_TunneledPlayback |
| */ |
| public static final String KEY_AUDIO_SESSION_ID = "audio-session-id"; |
| |
| /** |
| * A key for boolean AUTOSELECT behavior for the track. Tracks with AUTOSELECT=true |
| * are considered when automatically selecting a track without specific user |
| * choice, based on the current locale. |
| * This is currently only used for subtitle tracks, when the user selected |
| * 'Default' for the captioning locale. |
| * The associated value is an integer, where non-0 means TRUE. This is an optional |
| * field; if not specified, AUTOSELECT defaults to TRUE. |
| */ |
| public static final String KEY_IS_AUTOSELECT = "is-autoselect"; |
| |
| /** |
| * A key for boolean DEFAULT behavior for the track. The track with DEFAULT=true is |
| * selected in the absence of a specific user choice. |
| * This is currently used in two scenarios: |
| * 1) for subtitle tracks, when the user selected 'Default' for the captioning locale. |
| * 2) for a {@link #MIMETYPE_IMAGE_ANDROID_HEIC} track, indicating the image is the |
| * primary item in the file. |
| |
| * The associated value is an integer, where non-0 means TRUE. This is an optional |
| * field; if not specified, DEFAULT is considered to be FALSE. |
| */ |
| public static final String KEY_IS_DEFAULT = "is-default"; |
| |
| /** |
| * A key for the FORCED field for subtitle tracks. True if it is a |
| * forced subtitle track. Forced subtitle tracks are essential for the |
| * content and are shown even when the user turns off Captions. They |
| * are used for example to translate foreign/alien dialogs or signs. |
| * The associated value is an integer, where non-0 means TRUE. This is an |
| * optional field; if not specified, FORCED defaults to FALSE. |
| */ |
| public static final String KEY_IS_FORCED_SUBTITLE = "is-forced-subtitle"; |
| |
| /** @hide */ |
| public static final String KEY_IS_TIMED_TEXT = "is-timed-text"; |
| |
| // The following color aspect values must be in sync with the ones in HardwareAPI.h. |
| /** |
| * An optional key describing the color primaries, white point and |
| * luminance factors for video content. |
| * |
| * The associated value is an integer: 0 if unspecified, or one of the |
| * COLOR_STANDARD_ values. |
| */ |
| public static final String KEY_COLOR_STANDARD = "color-standard"; |
| |
| /** BT.709 color chromacity coordinates with KR = 0.2126, KB = 0.0722. */ |
| public static final int COLOR_STANDARD_BT709 = 1; |
| |
| /** BT.601 625 color chromacity coordinates with KR = 0.299, KB = 0.114. */ |
| public static final int COLOR_STANDARD_BT601_PAL = 2; |
| |
| /** BT.601 525 color chromacity coordinates with KR = 0.299, KB = 0.114. */ |
| public static final int COLOR_STANDARD_BT601_NTSC = 4; |
| |
| /** BT.2020 color chromacity coordinates with KR = 0.2627, KB = 0.0593. */ |
| public static final int COLOR_STANDARD_BT2020 = 6; |
| |
| /** @hide */ |
| @IntDef({ |
| COLOR_STANDARD_BT709, |
| COLOR_STANDARD_BT601_PAL, |
| COLOR_STANDARD_BT601_NTSC, |
| COLOR_STANDARD_BT2020, |
| }) |
| @Retention(RetentionPolicy.SOURCE) |
| public @interface ColorStandard {} |
| |
| /** |
| * An optional key describing the opto-electronic transfer function used |
| * for the video content. |
| * |
| * The associated value is an integer: 0 if unspecified, or one of the |
| * COLOR_TRANSFER_ values. |
| */ |
| public static final String KEY_COLOR_TRANSFER = "color-transfer"; |
| |
| /** Linear transfer characteristic curve. */ |
| public static final int COLOR_TRANSFER_LINEAR = 1; |
| |
| /** SMPTE 170M transfer characteristic curve used by BT.601/BT.709/BT.2020. This is the curve |
| * used by most non-HDR video content. */ |
| public static final int COLOR_TRANSFER_SDR_VIDEO = 3; |
| |
| /** SMPTE ST 2084 transfer function. This is used by some HDR video content. */ |
| public static final int COLOR_TRANSFER_ST2084 = 6; |
| |
| /** ARIB STD-B67 hybrid-log-gamma transfer function. This is used by some HDR video content. */ |
| public static final int COLOR_TRANSFER_HLG = 7; |
| |
| /** @hide */ |
| @IntDef({ |
| COLOR_TRANSFER_LINEAR, |
| COLOR_TRANSFER_SDR_VIDEO, |
| COLOR_TRANSFER_ST2084, |
| COLOR_TRANSFER_HLG, |
| }) |
| @Retention(RetentionPolicy.SOURCE) |
| public @interface ColorTransfer {} |
| |
| /** |
| * An optional key describing the range of the component values of the video content. |
| * |
| * The associated value is an integer: 0 if unspecified, or one of the |
| * COLOR_RANGE_ values. |
| */ |
| public static final String KEY_COLOR_RANGE = "color-range"; |
| |
| /** Limited range. Y component values range from 16 to 235 for 8-bit content. |
| * Cr, Cy values range from 16 to 240 for 8-bit content. |
| * This is the default for video content. */ |
| public static final int COLOR_RANGE_LIMITED = 2; |
| |
| /** Full range. Y, Cr and Cb component values range from 0 to 255 for 8-bit content. */ |
| public static final int COLOR_RANGE_FULL = 1; |
| |
| /** @hide */ |
| @IntDef({ |
| COLOR_RANGE_LIMITED, |
| COLOR_RANGE_FULL, |
| }) |
| @Retention(RetentionPolicy.SOURCE) |
| public @interface ColorRange {} |
| |
| /** |
| * An optional key describing the static metadata of HDR (high-dynamic-range) video content. |
| * |
| * The associated value is a ByteBuffer. This buffer contains the raw contents of the |
| * Static Metadata Descriptor (including the descriptor ID) of an HDMI Dynamic Range and |
| * Mastering InfoFrame as defined by CTA-861.3. This key must be provided to video decoders |
| * for HDR video content unless this information is contained in the bitstream and the video |
| * decoder supports an HDR-capable profile. This key must be provided to video encoders for |
| * HDR video content. |
| */ |
| public static final String KEY_HDR_STATIC_INFO = "hdr-static-info"; |
| |
| /** |
| * A key describing a unique ID for the content of a media track. |
| * |
| * <p>This key is used by {@link MediaExtractor}. Some extractors provide multiple encodings |
| * of the same track (e.g. float audio tracks for FLAC and WAV may be expressed as two |
| * tracks via MediaExtractor: a normal PCM track for backward compatibility, and a float PCM |
| * track for added fidelity. Similarly, Dolby Vision extractor may provide a baseline SDR |
| * version of a DV track.) This key can be used to identify which MediaExtractor tracks refer |
| * to the same underlying content. |
| * </p> |
| * |
| * The associated value is an integer. |
| */ |
| public static final String KEY_TRACK_ID = "track-id"; |
| |
| /** |
| * A key describing the system id of the conditional access system used to scramble |
| * a media track. |
| * <p> |
| * This key is set by {@link MediaExtractor} if the track is scrambled with a conditional |
| * access system. |
| * <p> |
| * The associated value is an integer. |
| * @hide |
| */ |
| public static final String KEY_CA_SYSTEM_ID = "ca-system-id"; |
| |
| /** |
| * A key describing the {@link MediaCas.Session} object associated with a media track. |
| * <p> |
| * This key is set by {@link MediaExtractor} if the track is scrambled with a conditional |
| * access system. |
| * <p> |
| * The associated value is a ByteBuffer. |
| * @hide |
| */ |
| public static final String KEY_CA_SESSION_ID = "ca-session-id"; |
| |
| /* package private */ MediaFormat(Map<String, Object> map) { |
| mMap = map; |
| } |
| |
| /** |
| * Creates an empty MediaFormat |
| */ |
| public MediaFormat() { |
| mMap = new HashMap(); |
| } |
| |
| @UnsupportedAppUsage |
| /* package private */ Map<String, Object> getMap() { |
| return mMap; |
| } |
| |
| /** |
| * Returns true iff a key of the given name exists in the format. |
| */ |
| public final boolean containsKey(String name) { |
| return mMap.containsKey(name); |
| } |
| |
| /** |
| * A key prefix used together with a {@link MediaCodecInfo.CodecCapabilities} |
| * feature name describing a required or optional feature for a codec capabilities |
| * query. |
| * The associated value is an integer, where non-0 value means the feature is |
| * requested to be present, while 0 value means the feature is requested to be not |
| * present. |
| * @see MediaCodecList#findDecoderForFormat |
| * @see MediaCodecList#findEncoderForFormat |
| * @see MediaCodecInfo.CodecCapabilities#isFormatSupported |
| * |
| * @hide |
| */ |
| public static final String KEY_FEATURE_ = "feature-"; |
| |
| /** |
| * Returns the value of an integer key. |
| */ |
| public final int getInteger(String name) { |
| return ((Integer)mMap.get(name)).intValue(); |
| } |
| |
| /** |
| * Returns the value of an integer key, or the default value if the |
| * key is missing or is for another type value. |
| * @hide |
| */ |
| public final int getInteger(String name, int defaultValue) { |
| try { |
| return getInteger(name); |
| } |
| catch (NullPointerException e) { /* no such field */ } |
| catch (ClassCastException e) { /* field of different type */ } |
| return defaultValue; |
| } |
| |
| /** |
| * Returns the value of a long key. |
| */ |
| public final long getLong(String name) { |
| return ((Long)mMap.get(name)).longValue(); |
| } |
| |
| /** |
| * Returns the value of a float key. |
| */ |
| public final float getFloat(String name) { |
| return ((Float)mMap.get(name)).floatValue(); |
| } |
| |
| /** |
| * Returns the value of a string key. |
| */ |
| public final String getString(String name) { |
| return (String)mMap.get(name); |
| } |
| |
| /** |
| * Returns the value of a ByteBuffer key. |
| */ |
| public final ByteBuffer getByteBuffer(String name) { |
| return (ByteBuffer)mMap.get(name); |
| } |
| |
| /** |
| * Returns whether a feature is to be enabled ({@code true}) or disabled |
| * ({@code false}). |
| * |
| * @param feature the name of a {@link MediaCodecInfo.CodecCapabilities} feature. |
| * |
| * @throws IllegalArgumentException if the feature was neither set to be enabled |
| * nor to be disabled. |
| */ |
| public boolean getFeatureEnabled(String feature) { |
| Integer enabled = (Integer)mMap.get(KEY_FEATURE_ + feature); |
| if (enabled == null) { |
| throw new IllegalArgumentException("feature is not specified"); |
| } |
| return enabled != 0; |
| } |
| |
| /** |
| * Sets the value of an integer key. |
| */ |
| public final void setInteger(String name, int value) { |
| mMap.put(name, Integer.valueOf(value)); |
| } |
| |
| /** |
| * Sets the value of a long key. |
| */ |
| public final void setLong(String name, long value) { |
| mMap.put(name, Long.valueOf(value)); |
| } |
| |
| /** |
| * Sets the value of a float key. |
| */ |
| public final void setFloat(String name, float value) { |
| mMap.put(name, new Float(value)); |
| } |
| |
| /** |
| * Sets the value of a string key. |
| */ |
| public final void setString(String name, String value) { |
| mMap.put(name, value); |
| } |
| |
| /** |
| * Sets the value of a ByteBuffer key. |
| */ |
| public final void setByteBuffer(String name, ByteBuffer bytes) { |
| mMap.put(name, bytes); |
| } |
| |
| /** |
| * Sets whether a feature is to be enabled ({@code true}) or disabled |
| * ({@code false}). |
| * |
| * If {@code enabled} is {@code true}, the feature is requested to be present. |
| * Otherwise, the feature is requested to be not present. |
| * |
| * @param feature the name of a {@link MediaCodecInfo.CodecCapabilities} feature. |
| * |
| * @see MediaCodecList#findDecoderForFormat |
| * @see MediaCodecList#findEncoderForFormat |
| * @see MediaCodecInfo.CodecCapabilities#isFormatSupported |
| */ |
| public void setFeatureEnabled(String feature, boolean enabled) { |
| setInteger(KEY_FEATURE_ + feature, enabled ? 1 : 0); |
| } |
| |
| /** |
| * Creates a minimal audio format. |
| * @param mime The mime type of the content. |
| * @param sampleRate The sampling rate of the content. |
| * @param channelCount The number of audio channels in the content. |
| */ |
| public static final MediaFormat createAudioFormat( |
| String mime, |
| int sampleRate, |
| int channelCount) { |
| MediaFormat format = new MediaFormat(); |
| format.setString(KEY_MIME, mime); |
| format.setInteger(KEY_SAMPLE_RATE, sampleRate); |
| format.setInteger(KEY_CHANNEL_COUNT, channelCount); |
| |
| return format; |
| } |
| |
| /** |
| * Creates a minimal subtitle format. |
| * @param mime The mime type of the content. |
| * @param language The language of the content, using either ISO 639-1 or 639-2/T |
| * codes. Specify null or "und" if language information is only included |
| * in the content. (This will also work if there are multiple language |
| * tracks in the content.) |
| */ |
| public static final MediaFormat createSubtitleFormat( |
| String mime, |
| String language) { |
| MediaFormat format = new MediaFormat(); |
| format.setString(KEY_MIME, mime); |
| format.setString(KEY_LANGUAGE, language); |
| |
| return format; |
| } |
| |
| /** |
| * Creates a minimal video format. |
| * @param mime The mime type of the content. |
| * @param width The width of the content (in pixels) |
| * @param height The height of the content (in pixels) |
| */ |
| public static final MediaFormat createVideoFormat( |
| String mime, |
| int width, |
| int height) { |
| MediaFormat format = new MediaFormat(); |
| format.setString(KEY_MIME, mime); |
| format.setInteger(KEY_WIDTH, width); |
| format.setInteger(KEY_HEIGHT, height); |
| |
| return format; |
| } |
| |
| @Override |
| public String toString() { |
| return mMap.toString(); |
| } |
| } |