| /* |
| * Copyright (C) 2016 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "SkiaPipeline.h" |
| |
| #include <SkImageEncoder.h> |
| #include <SkImageInfo.h> |
| #include <SkImagePriv.h> |
| #include <SkOverdrawCanvas.h> |
| #include <SkOverdrawColorFilter.h> |
| #include <SkPicture.h> |
| #include <SkPictureRecorder.h> |
| #include "TreeInfo.h" |
| #include "VectorDrawable.h" |
| #include "utils/TraceUtils.h" |
| |
| #include <unistd.h> |
| |
| using namespace android::uirenderer::renderthread; |
| |
| namespace android { |
| namespace uirenderer { |
| namespace skiapipeline { |
| |
| float SkiaPipeline::mLightRadius = 0; |
| uint8_t SkiaPipeline::mAmbientShadowAlpha = 0; |
| uint8_t SkiaPipeline::mSpotShadowAlpha = 0; |
| |
| Vector3 SkiaPipeline::mLightCenter = {FLT_MIN, FLT_MIN, FLT_MIN}; |
| |
| SkiaPipeline::SkiaPipeline(RenderThread& thread) : mRenderThread(thread) { |
| mVectorDrawables.reserve(30); |
| } |
| |
| SkiaPipeline::~SkiaPipeline() { |
| unpinImages(); |
| } |
| |
| TaskManager* SkiaPipeline::getTaskManager() { |
| return mRenderThread.cacheManager().getTaskManager(); |
| } |
| |
| void SkiaPipeline::onDestroyHardwareResources() { |
| unpinImages(); |
| mRenderThread.cacheManager().trimStaleResources(); |
| } |
| |
| bool SkiaPipeline::pinImages(std::vector<SkImage*>& mutableImages) { |
| for (SkImage* image : mutableImages) { |
| if (SkImage_pinAsTexture(image, mRenderThread.getGrContext())) { |
| mPinnedImages.emplace_back(sk_ref_sp(image)); |
| } else { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| void SkiaPipeline::unpinImages() { |
| for (auto& image : mPinnedImages) { |
| SkImage_unpinAsTexture(image.get(), mRenderThread.getGrContext()); |
| } |
| mPinnedImages.clear(); |
| } |
| |
| void SkiaPipeline::onPrepareTree() { |
| // The only time mVectorDrawables is not empty is if prepare tree was called 2 times without |
| // a renderFrame in the middle. |
| mVectorDrawables.clear(); |
| } |
| |
| void SkiaPipeline::renderLayers(const LightGeometry& lightGeometry, |
| LayerUpdateQueue* layerUpdateQueue, bool opaque, |
| const LightInfo& lightInfo) { |
| updateLighting(lightGeometry, lightInfo); |
| ATRACE_NAME("draw layers"); |
| renderVectorDrawableCache(); |
| renderLayersImpl(*layerUpdateQueue, opaque); |
| layerUpdateQueue->clear(); |
| } |
| |
| void SkiaPipeline::renderLayersImpl(const LayerUpdateQueue& layers, bool opaque) { |
| sk_sp<GrContext> cachedContext; |
| |
| // Render all layers that need to be updated, in order. |
| for (size_t i = 0; i < layers.entries().size(); i++) { |
| RenderNode* layerNode = layers.entries()[i].renderNode.get(); |
| // only schedule repaint if node still on layer - possible it may have been |
| // removed during a dropped frame, but layers may still remain scheduled so |
| // as not to lose info on what portion is damaged |
| if (CC_LIKELY(layerNode->getLayerSurface() != nullptr)) { |
| SkASSERT(layerNode->getLayerSurface()); |
| SkiaDisplayList* displayList = (SkiaDisplayList*)layerNode->getDisplayList(); |
| if (!displayList || displayList->isEmpty()) { |
| SkDEBUGF(("%p drawLayers(%s) : missing drawable", layerNode, layerNode->getName())); |
| return; |
| } |
| |
| const Rect& layerDamage = layers.entries()[i].damage; |
| |
| SkCanvas* layerCanvas = tryCapture(layerNode->getLayerSurface()); |
| |
| int saveCount = layerCanvas->save(); |
| SkASSERT(saveCount == 1); |
| |
| layerCanvas->androidFramework_setDeviceClipRestriction(layerDamage.toSkIRect()); |
| |
| auto savedLightCenter = mLightCenter; |
| // map current light center into RenderNode's coordinate space |
| layerNode->getSkiaLayer()->inverseTransformInWindow.mapPoint3d(mLightCenter); |
| |
| const RenderProperties& properties = layerNode->properties(); |
| const SkRect bounds = SkRect::MakeWH(properties.getWidth(), properties.getHeight()); |
| if (properties.getClipToBounds() && layerCanvas->quickReject(bounds)) { |
| return; |
| } |
| |
| ATRACE_FORMAT("drawLayer [%s] %.1f x %.1f", layerNode->getName(), bounds.width(), |
| bounds.height()); |
| |
| layerNode->getSkiaLayer()->hasRenderedSinceRepaint = false; |
| layerCanvas->clear(SK_ColorTRANSPARENT); |
| |
| RenderNodeDrawable root(layerNode, layerCanvas, false); |
| root.forceDraw(layerCanvas); |
| layerCanvas->restoreToCount(saveCount); |
| mLightCenter = savedLightCenter; |
| |
| endCapture(layerNode->getLayerSurface()); |
| |
| // cache the current context so that we can defer flushing it until |
| // either all the layers have been rendered or the context changes |
| GrContext* currentContext = layerNode->getLayerSurface()->getCanvas()->getGrContext(); |
| if (cachedContext.get() != currentContext) { |
| if (cachedContext.get()) { |
| ATRACE_NAME("flush layers (context changed)"); |
| cachedContext->flush(); |
| } |
| cachedContext.reset(SkSafeRef(currentContext)); |
| } |
| } |
| } |
| |
| if (cachedContext.get()) { |
| ATRACE_NAME("flush layers"); |
| cachedContext->flush(); |
| } |
| } |
| |
| bool SkiaPipeline::createOrUpdateLayer(RenderNode* node, const DamageAccumulator& damageAccumulator, |
| ErrorHandler* errorHandler) { |
| // compute the size of the surface (i.e. texture) to be allocated for this layer |
| const int surfaceWidth = ceilf(node->getWidth() / float(LAYER_SIZE)) * LAYER_SIZE; |
| const int surfaceHeight = ceilf(node->getHeight() / float(LAYER_SIZE)) * LAYER_SIZE; |
| |
| SkSurface* layer = node->getLayerSurface(); |
| if (!layer || layer->width() != surfaceWidth || layer->height() != surfaceHeight) { |
| SkImageInfo info; |
| info = SkImageInfo::Make(surfaceWidth, surfaceHeight, getSurfaceColorType(), |
| kPremul_SkAlphaType, getSurfaceColorSpace()); |
| SkSurfaceProps props(0, kUnknown_SkPixelGeometry); |
| SkASSERT(mRenderThread.getGrContext() != nullptr); |
| node->setLayerSurface(SkSurface::MakeRenderTarget(mRenderThread.getGrContext(), |
| SkBudgeted::kYes, info, 0, &props)); |
| if (node->getLayerSurface()) { |
| // update the transform in window of the layer to reset its origin wrt light source |
| // position |
| Matrix4 windowTransform; |
| damageAccumulator.computeCurrentTransform(&windowTransform); |
| node->getSkiaLayer()->inverseTransformInWindow = windowTransform; |
| } else { |
| String8 cachesOutput; |
| mRenderThread.cacheManager().dumpMemoryUsage(cachesOutput, |
| &mRenderThread.renderState()); |
| ALOGE("%s", cachesOutput.string()); |
| if (errorHandler) { |
| std::ostringstream err; |
| err << "Unable to create layer for " << node->getName(); |
| const int maxTextureSize = DeviceInfo::get()->maxTextureSize(); |
| err << ", size " << info.width() << "x" << info.height() << " max size " |
| << maxTextureSize << " color type " << (int)info.colorType() << " has context " |
| << (int)(mRenderThread.getGrContext() != nullptr); |
| errorHandler->onError(err.str()); |
| } |
| } |
| return true; |
| } |
| return false; |
| } |
| |
| void SkiaPipeline::prepareToDraw(const RenderThread& thread, Bitmap* bitmap) { |
| GrContext* context = thread.getGrContext(); |
| if (context) { |
| ATRACE_FORMAT("Bitmap#prepareToDraw %dx%d", bitmap->width(), bitmap->height()); |
| auto image = bitmap->makeImage(); |
| if (image.get() && !bitmap->isHardware()) { |
| SkImage_pinAsTexture(image.get(), context); |
| SkImage_unpinAsTexture(image.get(), context); |
| } |
| } |
| } |
| |
| void SkiaPipeline::renderVectorDrawableCache() { |
| if (!mVectorDrawables.empty()) { |
| sp<VectorDrawableAtlas> atlas = mRenderThread.cacheManager().acquireVectorDrawableAtlas(); |
| auto grContext = mRenderThread.getGrContext(); |
| atlas->prepareForDraw(grContext); |
| ATRACE_NAME("Update VectorDrawables"); |
| for (auto vd : mVectorDrawables) { |
| vd->updateCache(atlas, grContext); |
| } |
| mVectorDrawables.clear(); |
| } |
| } |
| |
| class SkiaPipeline::SavePictureProcessor : public TaskProcessor<bool> { |
| public: |
| explicit SavePictureProcessor(TaskManager* taskManager) : TaskProcessor<bool>(taskManager) {} |
| |
| struct SavePictureTask : public Task<bool> { |
| sk_sp<SkData> data; |
| std::string filename; |
| }; |
| |
| void savePicture(const sk_sp<SkData>& data, const std::string& filename) { |
| sp<SavePictureTask> task(new SavePictureTask()); |
| task->data = data; |
| task->filename = filename; |
| TaskProcessor<bool>::add(task); |
| } |
| |
| virtual void onProcess(const sp<Task<bool>>& task) override { |
| SavePictureTask* t = static_cast<SavePictureTask*>(task.get()); |
| |
| if (0 == access(t->filename.c_str(), F_OK)) { |
| task->setResult(false); |
| return; |
| } |
| |
| SkFILEWStream stream(t->filename.c_str()); |
| if (stream.isValid()) { |
| stream.write(t->data->data(), t->data->size()); |
| stream.flush(); |
| SkDebugf("SKP Captured Drawing Output (%d bytes) for frame. %s", stream.bytesWritten(), |
| t->filename.c_str()); |
| } |
| |
| task->setResult(true); |
| } |
| }; |
| |
| SkCanvas* SkiaPipeline::tryCapture(SkSurface* surface) { |
| if (CC_UNLIKELY(Properties::skpCaptureEnabled)) { |
| bool recordingPicture = mCaptureSequence > 0; |
| char prop[PROPERTY_VALUE_MAX] = {'\0'}; |
| if (!recordingPicture) { |
| property_get(PROPERTY_CAPTURE_SKP_FILENAME, prop, "0"); |
| recordingPicture = prop[0] != '0' && |
| mCapturedFile != prop; // ensure we capture only once per filename |
| if (recordingPicture) { |
| mCapturedFile = prop; |
| mCaptureSequence = property_get_int32(PROPERTY_CAPTURE_SKP_FRAMES, 1); |
| } |
| } |
| if (recordingPicture) { |
| mRecorder.reset(new SkPictureRecorder()); |
| return mRecorder->beginRecording(surface->width(), surface->height(), nullptr, |
| SkPictureRecorder::kPlaybackDrawPicture_RecordFlag); |
| } |
| } |
| return surface->getCanvas(); |
| } |
| |
| void SkiaPipeline::endCapture(SkSurface* surface) { |
| if (CC_UNLIKELY(mRecorder.get())) { |
| sk_sp<SkPicture> picture = mRecorder->finishRecordingAsPicture(); |
| surface->getCanvas()->drawPicture(picture); |
| if (picture->approximateOpCount() > 0) { |
| auto data = picture->serialize(); |
| |
| // offload saving to file in a different thread |
| if (!mSavePictureProcessor.get()) { |
| TaskManager* taskManager = getTaskManager(); |
| mSavePictureProcessor = new SavePictureProcessor( |
| taskManager->canRunTasks() ? taskManager : nullptr); |
| } |
| if (1 == mCaptureSequence) { |
| mSavePictureProcessor->savePicture(data, mCapturedFile); |
| } else { |
| mSavePictureProcessor->savePicture( |
| data, mCapturedFile + "_" + std::to_string(mCaptureSequence)); |
| } |
| mCaptureSequence--; |
| } |
| mRecorder.reset(); |
| } |
| } |
| |
| void SkiaPipeline::renderFrame(const LayerUpdateQueue& layers, const SkRect& clip, |
| const std::vector<sp<RenderNode>>& nodes, bool opaque, |
| const Rect& contentDrawBounds, sk_sp<SkSurface> surface) { |
| renderVectorDrawableCache(); |
| |
| // draw all layers up front |
| renderLayersImpl(layers, opaque); |
| |
| // initialize the canvas for the current frame, that might be a recording canvas if SKP |
| // capture is enabled. |
| std::unique_ptr<SkPictureRecorder> recorder; |
| SkCanvas* canvas = tryCapture(surface.get()); |
| |
| renderFrameImpl(layers, clip, nodes, opaque, contentDrawBounds, canvas); |
| |
| endCapture(surface.get()); |
| |
| if (CC_UNLIKELY(Properties::debugOverdraw)) { |
| renderOverdraw(layers, clip, nodes, contentDrawBounds, surface); |
| } |
| |
| ATRACE_NAME("flush commands"); |
| surface->getCanvas()->flush(); |
| } |
| |
| namespace { |
| static Rect nodeBounds(RenderNode& node) { |
| auto& props = node.properties(); |
| return Rect(props.getLeft(), props.getTop(), props.getRight(), props.getBottom()); |
| } |
| } |
| |
| void SkiaPipeline::renderFrameImpl(const LayerUpdateQueue& layers, const SkRect& clip, |
| const std::vector<sp<RenderNode>>& nodes, bool opaque, |
| const Rect& contentDrawBounds, SkCanvas* canvas) { |
| SkAutoCanvasRestore saver(canvas, true); |
| canvas->androidFramework_setDeviceClipRestriction(clip.roundOut()); |
| |
| // STOPSHIP: Revert, temporary workaround to clear always F16 frame buffer for b/74976293 |
| if (!opaque || getSurfaceColorType() == kRGBA_F16_SkColorType) { |
| canvas->clear(SK_ColorTRANSPARENT); |
| } |
| |
| if (1 == nodes.size()) { |
| if (!nodes[0]->nothingToDraw()) { |
| RenderNodeDrawable root(nodes[0].get(), canvas); |
| root.draw(canvas); |
| } |
| } else if (0 == nodes.size()) { |
| // nothing to draw |
| } else { |
| // It there are multiple render nodes, they are laid out as follows: |
| // #0 - backdrop (content + caption) |
| // #1 - content (local bounds are at (0,0), will be translated and clipped to backdrop) |
| // #2 - additional overlay nodes |
| // Usually the backdrop cannot be seen since it will be entirely covered by the content. |
| // While |
| // resizing however it might become partially visible. The following render loop will crop |
| // the |
| // backdrop against the content and draw the remaining part of it. It will then draw the |
| // content |
| // cropped to the backdrop (since that indicates a shrinking of the window). |
| // |
| // Additional nodes will be drawn on top with no particular clipping semantics. |
| |
| // Usually the contents bounds should be mContentDrawBounds - however - we will |
| // move it towards the fixed edge to give it a more stable appearance (for the moment). |
| // If there is no content bounds we ignore the layering as stated above and start with 2. |
| |
| // Backdrop bounds in render target space |
| const Rect backdrop = nodeBounds(*nodes[0]); |
| |
| // Bounds that content will fill in render target space (note content node bounds may be |
| // bigger) |
| Rect content(contentDrawBounds.getWidth(), contentDrawBounds.getHeight()); |
| content.translate(backdrop.left, backdrop.top); |
| if (!content.contains(backdrop) && !nodes[0]->nothingToDraw()) { |
| // Content doesn't entirely overlap backdrop, so fill around content (right/bottom) |
| |
| // Note: in the future, if content doesn't snap to backdrop's left/top, this may need to |
| // also fill left/top. Currently, both 2up and freeform position content at the top/left |
| // of |
| // the backdrop, so this isn't necessary. |
| RenderNodeDrawable backdropNode(nodes[0].get(), canvas); |
| if (content.right < backdrop.right) { |
| // draw backdrop to right side of content |
| SkAutoCanvasRestore acr(canvas, true); |
| canvas->clipRect(SkRect::MakeLTRB(content.right, backdrop.top, backdrop.right, |
| backdrop.bottom)); |
| backdropNode.draw(canvas); |
| } |
| if (content.bottom < backdrop.bottom) { |
| // draw backdrop to bottom of content |
| // Note: bottom fill uses content left/right, to avoid overdrawing left/right fill |
| SkAutoCanvasRestore acr(canvas, true); |
| canvas->clipRect(SkRect::MakeLTRB(content.left, content.bottom, content.right, |
| backdrop.bottom)); |
| backdropNode.draw(canvas); |
| } |
| } |
| |
| RenderNodeDrawable contentNode(nodes[1].get(), canvas); |
| if (!backdrop.isEmpty()) { |
| // content node translation to catch up with backdrop |
| float dx = backdrop.left - contentDrawBounds.left; |
| float dy = backdrop.top - contentDrawBounds.top; |
| |
| SkAutoCanvasRestore acr(canvas, true); |
| canvas->translate(dx, dy); |
| const SkRect contentLocalClip = |
| SkRect::MakeXYWH(contentDrawBounds.left, contentDrawBounds.top, |
| backdrop.getWidth(), backdrop.getHeight()); |
| canvas->clipRect(contentLocalClip); |
| contentNode.draw(canvas); |
| } else { |
| SkAutoCanvasRestore acr(canvas, true); |
| contentNode.draw(canvas); |
| } |
| |
| // remaining overlay nodes, simply defer |
| for (size_t index = 2; index < nodes.size(); index++) { |
| if (!nodes[index]->nothingToDraw()) { |
| SkAutoCanvasRestore acr(canvas, true); |
| RenderNodeDrawable overlayNode(nodes[index].get(), canvas); |
| overlayNode.draw(canvas); |
| } |
| } |
| } |
| } |
| |
| void SkiaPipeline::dumpResourceCacheUsage() const { |
| int resources, maxResources; |
| size_t bytes, maxBytes; |
| mRenderThread.getGrContext()->getResourceCacheUsage(&resources, &bytes); |
| mRenderThread.getGrContext()->getResourceCacheLimits(&maxResources, &maxBytes); |
| |
| SkString log("Resource Cache Usage:\n"); |
| log.appendf("%8d items out of %d maximum items\n", resources, maxResources); |
| log.appendf("%8zu bytes (%.2f MB) out of %.2f MB maximum\n", bytes, |
| bytes * (1.0f / (1024.0f * 1024.0f)), maxBytes * (1.0f / (1024.0f * 1024.0f))); |
| |
| ALOGD("%s", log.c_str()); |
| } |
| |
| void SkiaPipeline::setSurfaceColorProperties(ColorMode colorMode) { |
| if (colorMode == ColorMode::SRGB) { |
| mSurfaceColorType = SkColorType::kN32_SkColorType; |
| mSurfaceColorGamut = SkColorSpace::Gamut::kSRGB_Gamut; |
| mSurfaceColorSpace = SkColorSpace::MakeSRGB(); |
| } else if (colorMode == ColorMode::WideColorGamut) { |
| mSurfaceColorType = DeviceInfo::get()->getWideColorType(); |
| mSurfaceColorGamut = DeviceInfo::get()->getWideColorGamut(); |
| mSurfaceColorSpace = DeviceInfo::get()->getWideColorSpace(); |
| } else { |
| LOG_ALWAYS_FATAL("Unreachable: unsupported color mode."); |
| } |
| } |
| |
| // Overdraw debugging |
| |
| // These colors should be kept in sync with Caches::getOverdrawColor() with a few differences. |
| // This implementation: |
| // (1) Requires transparent entries for "no overdraw" and "single draws". |
| // (2) Requires premul colors (instead of unpremul). |
| // (3) Requires RGBA colors (instead of BGRA). |
| static const uint32_t kOverdrawColors[2][6] = { |
| { |
| 0x00000000, 0x00000000, 0x2f2f0000, 0x2f002f00, 0x3f00003f, 0x7f00007f, |
| }, |
| { |
| 0x00000000, 0x00000000, 0x2f2f0000, 0x4f004f4f, 0x5f50335f, 0x7f00007f, |
| }, |
| }; |
| |
| void SkiaPipeline::renderOverdraw(const LayerUpdateQueue& layers, const SkRect& clip, |
| const std::vector<sp<RenderNode>>& nodes, |
| const Rect& contentDrawBounds, sk_sp<SkSurface> surface) { |
| // Set up the overdraw canvas. |
| SkImageInfo offscreenInfo = SkImageInfo::MakeA8(surface->width(), surface->height()); |
| sk_sp<SkSurface> offscreen = surface->makeSurface(offscreenInfo); |
| SkOverdrawCanvas overdrawCanvas(offscreen->getCanvas()); |
| |
| // Fake a redraw to replay the draw commands. This will increment the alpha channel |
| // each time a pixel would have been drawn. |
| // Pass true for opaque so we skip the clear - the overdrawCanvas is already zero |
| // initialized. |
| renderFrameImpl(layers, clip, nodes, true, contentDrawBounds, &overdrawCanvas); |
| sk_sp<SkImage> counts = offscreen->makeImageSnapshot(); |
| |
| // Draw overdraw colors to the canvas. The color filter will convert counts to colors. |
| SkPaint paint; |
| const SkPMColor* colors = kOverdrawColors[static_cast<int>(Properties::overdrawColorSet)]; |
| paint.setColorFilter(SkOverdrawColorFilter::Make(colors)); |
| surface->getCanvas()->drawImage(counts.get(), 0.0f, 0.0f, &paint); |
| } |
| |
| } /* namespace skiapipeline */ |
| } /* namespace uirenderer */ |
| } /* namespace android */ |