| /* |
| * Copyright (C) 2015 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "JankTracker.h" |
| |
| #include <errno.h> |
| #include <inttypes.h> |
| #include <sys/mman.h> |
| |
| #include <algorithm> |
| #include <cmath> |
| #include <cstdio> |
| #include <limits> |
| |
| #include <cutils/ashmem.h> |
| #include <log/log.h> |
| #include <sstream> |
| |
| #include "Properties.h" |
| #include "utils/TimeUtils.h" |
| #include "utils/Trace.h" |
| |
| namespace android { |
| namespace uirenderer { |
| |
| struct Comparison { |
| FrameInfoIndex start; |
| FrameInfoIndex end; |
| }; |
| |
| static const Comparison COMPARISONS[] = { |
| {FrameInfoIndex::IntendedVsync, FrameInfoIndex::Vsync}, |
| {FrameInfoIndex::OldestInputEvent, FrameInfoIndex::Vsync}, |
| {FrameInfoIndex::Vsync, FrameInfoIndex::SyncStart}, |
| {FrameInfoIndex::SyncStart, FrameInfoIndex::IssueDrawCommandsStart}, |
| {FrameInfoIndex::IssueDrawCommandsStart, FrameInfoIndex::FrameCompleted}, |
| }; |
| |
| // If the event exceeds 10 seconds throw it away, this isn't a jank event |
| // it's an ANR and will be handled as such |
| static const int64_t IGNORE_EXCEEDING = seconds_to_nanoseconds(10); |
| |
| /* |
| * We don't track direct-drawing via Surface:lockHardwareCanvas() |
| * for now |
| * |
| * TODO: kSurfaceCanvas can negatively impact other drawing by using up |
| * time on the RenderThread, figure out how to attribute that as a jank-causer |
| */ |
| static const int64_t EXEMPT_FRAMES_FLAGS = FrameInfoFlags::SurfaceCanvas; |
| |
| // For testing purposes to try and eliminate test infra overhead we will |
| // consider any unknown delay of frame start as part of the test infrastructure |
| // and filter it out of the frame profile data |
| static FrameInfoIndex sFrameStart = FrameInfoIndex::IntendedVsync; |
| |
| JankTracker::JankTracker(ProfileDataContainer* globalData, const DisplayInfo& displayInfo) { |
| mGlobalData = globalData; |
| nsecs_t frameIntervalNanos = static_cast<nsecs_t>(1_s / displayInfo.fps); |
| #if USE_HWC2 |
| nsecs_t sfOffset = frameIntervalNanos - (displayInfo.presentationDeadline - 1_ms); |
| nsecs_t offsetDelta = sfOffset - displayInfo.appVsyncOffset; |
| // There are two different offset cases. If the offsetDelta is positive |
| // and small, then the intention is to give apps extra time by leveraging |
| // pipelining between the UI & RT threads. If the offsetDelta is large or |
| // negative, the intention is to subtract time from the total duration |
| // in which case we can't afford to wait for dequeueBuffer blockage. |
| if (offsetDelta <= 4_ms && offsetDelta >= 0) { |
| // SF will begin composition at VSYNC-app + offsetDelta. If we are triple |
| // buffered, this is the expected time at which dequeueBuffer will |
| // return due to the staggering of VSYNC-app & VSYNC-sf. |
| mDequeueTimeForgiveness = offsetDelta + 4_ms; |
| } |
| #endif |
| setFrameInterval(frameIntervalNanos); |
| } |
| |
| void JankTracker::setFrameInterval(nsecs_t frameInterval) { |
| mFrameInterval = frameInterval; |
| mThresholds[kMissedVsync] = 1; |
| /* |
| * Due to interpolation and sample rate differences between the touch |
| * panel and the display (example, 85hz touch panel driving a 60hz display) |
| * we call high latency 1.5 * frameinterval |
| * |
| * NOTE: Be careful when tuning this! A theoretical 1,000hz touch panel |
| * on a 60hz display will show kOldestInputEvent - kIntendedVsync of being 15ms |
| * Thus this must always be larger than frameInterval, or it will fail |
| */ |
| mThresholds[kHighInputLatency] = static_cast<int64_t>(1.5 * frameInterval); |
| |
| // Note that these do not add up to 1. This is intentional. It's to deal |
| // with variance in values, and should be sort of an upper-bound on what |
| // is reasonable to expect. |
| mThresholds[kSlowUI] = static_cast<int64_t>(.5 * frameInterval); |
| mThresholds[kSlowSync] = static_cast<int64_t>(.2 * frameInterval); |
| mThresholds[kSlowRT] = static_cast<int64_t>(.75 * frameInterval); |
| } |
| |
| void JankTracker::finishFrame(const FrameInfo& frame) { |
| // Fast-path for jank-free frames |
| int64_t totalDuration = frame.duration(sFrameStart, FrameInfoIndex::FrameCompleted); |
| if (mDequeueTimeForgiveness && frame[FrameInfoIndex::DequeueBufferDuration] > 500_us) { |
| nsecs_t expectedDequeueDuration = mDequeueTimeForgiveness + frame[FrameInfoIndex::Vsync] - |
| frame[FrameInfoIndex::IssueDrawCommandsStart]; |
| if (expectedDequeueDuration > 0) { |
| // Forgive only up to the expected amount, but not more than |
| // the actual time spent blocked. |
| nsecs_t forgiveAmount = |
| std::min(expectedDequeueDuration, frame[FrameInfoIndex::DequeueBufferDuration]); |
| LOG_ALWAYS_FATAL_IF(forgiveAmount >= totalDuration, |
| "Impossible dequeue duration! dequeue duration reported %" PRId64 |
| ", total duration %" PRId64, |
| forgiveAmount, totalDuration); |
| totalDuration -= forgiveAmount; |
| } |
| } |
| LOG_ALWAYS_FATAL_IF(totalDuration <= 0, "Impossible totalDuration %" PRId64, totalDuration); |
| mData->reportFrame(totalDuration); |
| (*mGlobalData)->reportFrame(totalDuration); |
| |
| // Keep the fast path as fast as possible. |
| if (CC_LIKELY(totalDuration < mFrameInterval)) { |
| return; |
| } |
| |
| // Only things like Surface.lockHardwareCanvas() are exempt from tracking |
| if (frame[FrameInfoIndex::Flags] & EXEMPT_FRAMES_FLAGS) { |
| return; |
| } |
| |
| mData->reportJank(); |
| (*mGlobalData)->reportJank(); |
| |
| for (int i = 0; i < NUM_BUCKETS; i++) { |
| int64_t delta = frame.duration(COMPARISONS[i].start, COMPARISONS[i].end); |
| if (delta >= mThresholds[i] && delta < IGNORE_EXCEEDING) { |
| mData->reportJankType((JankType)i); |
| (*mGlobalData)->reportJankType((JankType)i); |
| } |
| } |
| |
| // Log daveys since they are weird and we don't know what they are (b/70339576) |
| if (totalDuration >= 700_ms) { |
| static int sDaveyCount = 0; |
| std::stringstream ss; |
| ss << "Davey! duration=" << ns2ms(totalDuration) << "ms; "; |
| for (size_t i = 0; i < static_cast<size_t>(FrameInfoIndex::NumIndexes); i++) { |
| ss << FrameInfoNames[i] << "=" << frame[i] << ", "; |
| } |
| ALOGI("%s", ss.str().c_str()); |
| // Just so we have something that counts up, the value is largely irrelevant |
| ATRACE_INT(ss.str().c_str(), ++sDaveyCount); |
| } |
| } |
| |
| void JankTracker::dumpData(int fd, const ProfileDataDescription* description, |
| const ProfileData* data) { |
| if (description) { |
| switch (description->type) { |
| case JankTrackerType::Generic: |
| break; |
| case JankTrackerType::Package: |
| dprintf(fd, "\nPackage: %s", description->name.c_str()); |
| break; |
| case JankTrackerType::Window: |
| dprintf(fd, "\nWindow: %s", description->name.c_str()); |
| break; |
| } |
| } |
| if (sFrameStart != FrameInfoIndex::IntendedVsync) { |
| dprintf(fd, "\nNote: Data has been filtered!"); |
| } |
| data->dump(fd); |
| dprintf(fd, "\n"); |
| } |
| |
| void JankTracker::dumpFrames(int fd) { |
| dprintf(fd, "\n\n---PROFILEDATA---\n"); |
| for (size_t i = 0; i < static_cast<size_t>(FrameInfoIndex::NumIndexes); i++) { |
| dprintf(fd, "%s", FrameInfoNames[i].c_str()); |
| dprintf(fd, ","); |
| } |
| for (size_t i = 0; i < mFrames.size(); i++) { |
| FrameInfo& frame = mFrames[i]; |
| if (frame[FrameInfoIndex::SyncStart] == 0) { |
| continue; |
| } |
| dprintf(fd, "\n"); |
| for (int i = 0; i < static_cast<int>(FrameInfoIndex::NumIndexes); i++) { |
| dprintf(fd, "%" PRId64 ",", frame[i]); |
| } |
| } |
| dprintf(fd, "\n---PROFILEDATA---\n\n"); |
| } |
| |
| void JankTracker::reset() { |
| mFrames.clear(); |
| mData->reset(); |
| (*mGlobalData)->reset(); |
| sFrameStart = Properties::filterOutTestOverhead ? FrameInfoIndex::HandleInputStart |
| : FrameInfoIndex::IntendedVsync; |
| } |
| |
| } /* namespace uirenderer */ |
| } /* namespace android */ |