| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** |
| ** Copyright 2015 The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> |
| <!-- Toast message when Wi-Fi cannot scan for networks --> |
| <string name="wifi_fail_to_scan">Can\'t scan for networks</string> |
| <!-- Do not translate. Concise terminology for wifi with WEP security --> |
| <string name="wifi_security_short_wep">WEP</string> |
| <!-- Do not translate. Concise terminology for wifi with WPA security --> |
| <string name="wifi_security_short_wpa">WPA</string> |
| <!-- Do not translate. Concise terminology for wifi with WPA2 security --> |
| <string name="wifi_security_short_wpa2">WPA2</string> |
| <!-- Do not translate. Concise terminology for wifi with both WPA/WPA2 security --> |
| <string name="wifi_security_short_wpa_wpa2">WPA/WPA2</string> |
| <!-- Do not translate. Concise terminology for wifi with unknown PSK type --> |
| <string name="wifi_security_short_psk_generic">@string/wifi_security_short_wpa_wpa2</string> |
| <!-- Do not translate. Concise terminology for wifi with 802.1x EAP security --> |
| <string name="wifi_security_short_eap">802.1x</string> |
| |
| <!-- Used in Wi-Fi settings dialogs when Wi-Fi does not have any security. --> |
| <string name="wifi_security_none">None</string> |
| |
| <!-- Do not translate. Terminology for wifi with WEP security --> |
| <string name="wifi_security_wep">WEP</string> |
| <!-- Do not translate. Terminology for wifi with WPA security --> |
| <string name="wifi_security_wpa">WPA PSK</string> |
| <!-- Do not translate. Terminology for wifi with WPA2 security --> |
| <string name="wifi_security_wpa2">WPA2 PSK</string> |
| <!-- Do not translate. Terminology for wifi with both WPA/WPA2 security, or unknown --> |
| <string name="wifi_security_wpa_wpa2">WPA/WPA2 PSK</string> |
| <!-- Do not translate. Terminology for wifi with unknown PSK type --> |
| <string name="wifi_security_psk_generic">@string/wifi_security_wpa_wpa2</string> |
| <!-- Do not translate. Concise terminology for wifi with 802.1x EAP security --> |
| <string name="wifi_security_eap">802.1x EAP</string> |
| <!-- Do not translate. Concise terminology for Passpoint network --> |
| <string name="wifi_security_passpoint">Passpoint</string> |
| |
| <!-- Summary for the remembered network. --> |
| <string name="wifi_remembered">Saved</string> |
| <!-- Status for networks disabled for unknown reason --> |
| <string name="wifi_disabled_generic">Disabled</string> |
| <!-- Status for networked disabled from a DNS or DHCP failure --> |
| <string name="wifi_disabled_network_failure">IP Configuration Failure</string> |
| <!-- Status for networks disabled by the network recommendation provider --> |
| <string name="wifi_disabled_by_recommendation_provider">Not connected due to low quality network</string> |
| <!-- Status for networked disabled from a wifi association failure --> |
| <string name="wifi_disabled_wifi_failure">WiFi Connection Failure</string> |
| <!-- Status for networks disabled from authentication failure (wrong password |
| or certificate). --> |
| <string name="wifi_disabled_password_failure">Authentication problem</string> |
| <!-- Summary for the remembered network but currently not in range. --> |
| <string name="wifi_not_in_range">Not in range</string> |
| <!-- Summary for the network but no internet connection was detected. --> |
| <string name="wifi_no_internet_no_reconnect">No Internet Access Detected, won\'t automatically reconnect.</string> |
| <!-- Summary for the remembered network but no internet connection was detected. --> |
| <string name="wifi_no_internet">No Internet Access.</string> |
| <!-- Summary for saved networks --> |
| <string name="saved_network">Saved by <xliff:g id="name">%1$s</xliff:g></string> |
| |
| <!-- Status message of Wi-Fi when it is connected by a Wi-Fi assistant application. [CHAR LIMIT=NONE] --> |
| <string name="connected_via_wfa">Connected via Wi\u2011Fi assistant</string> |
| <!-- Status message of Wi-Fi when it is connected by Passpoint configuration. [CHAR LIMIT=NONE] --> |
| <string name="connected_via_passpoint">Connected via %1$s</string> |
| <!-- Status message of Wi-Fi when network has matching passpoint credentials. [CHAR LIMIT=NONE] --> |
| <string name="available_via_passpoint">Available via %1$s</string> |
| <!-- Package name for Settings app--> |
| <string name="settings_package" translatable="false">com.android.settings</string> |
| <!-- Package name for Certinstaller app--> |
| <string name="certinstaller_package" translatable="false">com.android.certinstaller</string> |
| |
| <!-- Summary for Connected wifi network without internet --> |
| <string name="wifi_connected_no_internet">Connected, no Internet</string> |
| |
| <!-- Bluetooth settings. Message when a device is disconnected --> |
| <string name="bluetooth_disconnected">Disconnected</string> |
| <!-- Bluetooth settings. Message when disconnecting from a device --> |
| <string name="bluetooth_disconnecting">Disconnecting\u2026</string> |
| <!-- Bluetooth settings. Message when connecting to a device --> |
| <string name="bluetooth_connecting">Connecting\u2026</string> |
| <!-- Bluetooth settings. Message when connected to a device. [CHAR LIMIT=40] --> |
| <string name="bluetooth_connected">Connected</string> |
| <!--Bluetooth settings screen, summary text under individual Bluetooth devices when pairing --> |
| <string name="bluetooth_pairing">Pairing\u2026</string> |
| |
| <!-- Bluetooth settings. Message when connected to a device, except for phone audio. [CHAR LIMIT=40] --> |
| <string name="bluetooth_connected_no_headset">Connected (no phone)</string> |
| <!-- Bluetooth settings. Message when connected to a device, except for media audio. [CHAR LIMIT=40] --> |
| <string name="bluetooth_connected_no_a2dp">Connected (no media)</string> |
| <!-- Bluetooth settings. Message when connected to a device, except for map. [CHAR LIMIT=40] --> |
| <string name="bluetooth_connected_no_map">Connected (no message access)</string> |
| <!-- Bluetooth settings. Message when connected to a device, except for phone/media audio. [CHAR LIMIT=40] --> |
| <string name="bluetooth_connected_no_headset_no_a2dp">Connected (no phone or media)</string> |
| |
| <!-- Bluetooth settings. The user-visible string that is used whenever referring to the A2DP profile. --> |
| <string name="bluetooth_profile_a2dp">Media audio</string> |
| <!-- Bluetooth settings. The user-visible string that is used whenever referring to the headset or handsfree profile. --> |
| <string name="bluetooth_profile_headset">Phone audio</string> |
| <!-- Bluetooth settings. The user-visible string that is used whenever referring to the OPP profile. --> |
| <string name="bluetooth_profile_opp">File transfer</string> |
| <!-- Bluetooth settings. The user-visible string that is used whenever referring to the HID profile. --> |
| <string name="bluetooth_profile_hid">Input device</string> |
| <!-- Bluetooth settings. The user-visible string that is used whenever referring to the PAN profile (accessing Internet through remote device). [CHAR LIMIT=40] --> |
| <string name="bluetooth_profile_pan">Internet access</string> |
| <!-- Bluetooth settings. The user-visible string that is used whenever referring to the PBAP profile. [CHAR LIMIT=40] --> |
| <string name="bluetooth_profile_pbap">Contact sharing</string> |
| <!-- Bluetooth settings. The user-visible summary string that is used whenever referring to the PBAP profile (sharing contacts). [CHAR LIMIT=60] --> |
| <string name="bluetooth_profile_pbap_summary">Use for contact sharing</string> |
| <!-- Bluetooth settings. The user-visible string that is used whenever referring to the PAN profile (sharing this device's Internet connection). [CHAR LIMIT=40] --> |
| <string name="bluetooth_profile_pan_nap">Internet connection sharing</string> |
| <!-- Bluetooth settings. The user-visible string that is used whenever referring to the map profile. --> |
| <string name="bluetooth_profile_map">Message Access</string> |
| <!-- Bluetooth settings. The user-visible string that is used whenever referring to the SAP profile (sharing SIM card). --> |
| <string name="bluetooth_profile_sap">SIM Access</string> |
| |
| <!-- Bluetooth settings. Connection options screen. The summary for the A2DP checkbox preference when A2DP is connected. --> |
| <string name="bluetooth_a2dp_profile_summary_connected">Connected to media audio</string> |
| <!-- Bluetooth settings. Connection options screen. The summary for the headset checkbox preference when headset is connected. --> |
| <string name="bluetooth_headset_profile_summary_connected">Connected to phone audio</string> |
| <!-- Bluetooth settings. Connection options screen. The summary for the OPP checkbox preference when OPP is connected. --> |
| <string name="bluetooth_opp_profile_summary_connected">Connected to file transfer server</string> |
| <!-- Bluetooth settings. Connection options screen. The summary for the map checkbox preference when map is connected. --> |
| <string name="bluetooth_map_profile_summary_connected">Connected to map</string> |
| <!-- Bluetooth settings. Connection options screen. The summary for the sap checkbox preference when SAP is connected. --> |
| <string name="bluetooth_sap_profile_summary_connected">Connected to SAP</string> |
| <!-- Bluetooth settings. Connection options screen. The summary for the OPP checkbox preference when OPP is not connected. --> |
| <string name="bluetooth_opp_profile_summary_not_connected">Not connected to file transfer server</string> |
| <!-- Bluetooth settings. Connection options screen. The summary for the HID checkbox preference when HID is connected. --> |
| <string name="bluetooth_hid_profile_summary_connected">Connected to input device</string> |
| <!-- Bluetooth settings. Connection options screen. The summary for the checkbox preference when PAN is connected (user role). [CHAR LIMIT=25]--> |
| <string name="bluetooth_pan_user_profile_summary_connected">Connected to device for Internet access</string> |
| <!-- Bluetooth settings. Connection options screen. The summary for the checkbox preference when PAN is connected (NAP role). [CHAR LIMIT=25]--> |
| <string name="bluetooth_pan_nap_profile_summary_connected">Sharing local Internet connection with device</string> |
| |
| <!-- Bluetooth settings. Connection options screen. The summary |
| for the PAN checkbox preference that describes how checking it |
| will set the PAN profile as preferred. --> |
| <string name="bluetooth_pan_profile_summary_use_for">Use for Internet access</string> |
| <!-- Bluetooth settings. Connection options screen. The summary for the map checkbox preference that describes how checking it will set the map profile as preferred. --> |
| <string name="bluetooth_map_profile_summary_use_for">Use for map</string> |
| <!-- Bluetooth settings. Connection options screen. The summary for the sap checkbox preference that describes how checking it will set the sap profile as preferred. --> |
| <string name="bluetooth_sap_profile_summary_use_for">Use for SIM access</string> |
| <!-- Bluetooth settings. Connection options screen. The summary for the A2DP checkbox preference that describes how checking it will set the A2DP profile as preferred. --> |
| <string name="bluetooth_a2dp_profile_summary_use_for">Use for media audio</string> |
| <!-- Bluetooth settings. Connection options screen. The summary for the headset checkbox preference that describes how checking it will set the headset profile as preferred. --> |
| <string name="bluetooth_headset_profile_summary_use_for">Use for phone audio</string> |
| <!-- Bluetooth settings. Connection options screen. The summary for the OPP checkbox preference that describes how checking it will set the OPP profile as preferred. --> |
| <string name="bluetooth_opp_profile_summary_use_for">Use for file transfer</string> |
| <!-- Bluetooth settings. Connection options screen. The summary |
| for the HID checkbox preference that describes how checking it |
| will set the HID profile as preferred. --> |
| <string name="bluetooth_hid_profile_summary_use_for">Use for input</string> |
| |
| <!-- Button text for accepting an incoming pairing request. [CHAR LIMIT=20] --> |
| <string name="bluetooth_pairing_accept">Pair</string> |
| <!-- Button text for accepting an incoming pairing request in all caps. [CHAR LIMIT=20] --> |
| <string name="bluetooth_pairing_accept_all_caps">PAIR</string> |
| <!-- Button text for declining an incoming pairing request. [CHAR LIMIT=20] --> |
| <string name="bluetooth_pairing_decline">Cancel</string> |
| |
| <!-- Message in pairing dialogs. [CHAR LIMIT=NONE] --> |
| <string name="bluetooth_pairing_will_share_phonebook">Pairing grants access to your contacts and call history when connected.</string> |
| <!-- Message for the error dialog when BT pairing fails generically. --> |
| <string name="bluetooth_pairing_error_message">Couldn\'t pair with <xliff:g id="device_name">%1$s</xliff:g>.</string> |
| |
| <!-- Message for the error dialog when BT pairing fails because the PIN / |
| Passkey entered is incorrect. --> |
| <string name="bluetooth_pairing_pin_error_message">Couldn\'t pair with <xliff:g id="device_name">%1$s</xliff:g> because of an incorrect PIN or passkey.</string> |
| <!-- Message for the error dialog when BT pairing fails because the other device is down. --> |
| <string name="bluetooth_pairing_device_down_error_message">Can\'t communicate with <xliff:g id="device_name">%1$s</xliff:g>.</string> |
| <!-- Message for the error dialog when BT pairing fails because the other device rejected the pairing. --> |
| <string name="bluetooth_pairing_rejected_error_message">Pairing rejected by <xliff:g id="device_name">%1$s</xliff:g>.</string> |
| |
| <!-- Content description of the WIFI signal when WIFI is disabled for accessibility (not shown on the screen). [CHAR LIMIT=NONE] --> |
| <string name="accessibility_wifi_off">Wifi off.</string> |
| <!-- Content description of the WIFI signal when no signal for accessibility (not shown on the screen). [CHAR LIMIT=NONE] --> |
| <string name="accessibility_no_wifi">Wifi disconnected.</string> |
| <!-- Content description of the WIFI signal when it is one bar for accessibility (not shown on the screen). [CHAR LIMIT=NONE] --> |
| <string name="accessibility_wifi_one_bar">Wifi one bar.</string> |
| <!-- Content description of the WIFI signal when it is two bars for accessibility (not shown on the screen). [CHAR LIMIT=NONE] --> |
| <string name="accessibility_wifi_two_bars">Wifi two bars.</string> |
| <!-- Content description of the WIFI signal when it is three bars for accessibility (not shown on the screen). [CHAR LIMIT=NONE] --> |
| <string name="accessibility_wifi_three_bars">Wifi three bars.</string> |
| <!-- Content description of the WIFI signal when it is full for accessibility (not shown on the screen). [CHAR LIMIT=NONE] --> |
| <string name="accessibility_wifi_signal_full">Wifi signal full.</string> |
| |
| <!-- Label for kernel threads in battery usage --> |
| <string name="process_kernel_label">Android OS</string> |
| <!-- Title of data usage item that represents all uninstalled applications. [CHAR LIMIT=48] --> |
| <string name="data_usage_uninstalled_apps">Removed apps</string> |
| <!-- Title of data usage item that represents all uninstalled applications or removed users. [CHAR LIMIT=48] --> |
| <string name="data_usage_uninstalled_apps_users">Removed apps and users</string> |
| |
| <!-- Tethering controls, item title to go into the tethering settings --> |
| <!-- Tethering controls, item title to go into the tethering settings when only USB tethering is available [CHAR LIMIT=25]--> |
| <string name="tether_settings_title_usb">USB tethering</string> |
| <!-- Tethering controls, item title to go into the tethering settings when only Wifi tethering is available [CHAR LIMIT=25]--> |
| <string name="tether_settings_title_wifi">Portable hotspot</string> |
| <!-- Tethering controls, item title to go into the tethering settings when only Bluetooth tethering is available [CHAR LIMIT=25]--> |
| <string name="tether_settings_title_bluetooth">Bluetooth tethering</string> |
| <!-- Tethering controls, item title to go into the tethering settings when USB and Bluetooth tethering are available [CHAR LIMIT=25]--> |
| <string name="tether_settings_title_usb_bluetooth">Tethering</string> |
| <!-- Tethering controls, item title to go into the tethering settings when USB, Bluetooth and Wifi tethering are available [CHAR LIMIT=25]--> |
| <string name="tether_settings_title_all">Tethering & portable hotspot</string> |
| |
| <!-- Title for a work profile. [CHAR LIMIT=25] --> |
| <string name="managed_user_title">All work apps</string> |
| |
| <!-- Title for Guest user [CHAR LIMIT=35] --> |
| <string name="user_guest">Guest</string> |
| |
| <!-- Manage apps, individual app screen, substituted for the application's label when the app's label CAN NOT be determined.--> |
| <string name="unknown">Unknown</string> |
| |
| <!-- [CHAR LIMIT=NONE] Label of a running process that represents another user --> |
| <string name="running_process_item_user_label">User: <xliff:g id="user_name">%1$s</xliff:g></string> |
| |
| <!-- Launch defaults preference summary with some set [CHAR LIMIT=40] --> |
| <string name="launch_defaults_some">Some defaults set</string> |
| <!-- Launch defaults preference summary with none set [CHAR LIMIT=40] --> |
| <string name="launch_defaults_none">No defaults set</string> |
| |
| <!-- Text-To-Speech (TTS) settings --><skip /> |
| <!-- Name of the TTS package as listed by the package manager. --> |
| <string name="tts_settings">Text-to-speech settings</string> |
| <!-- TTS option item name in the main settings screen --> |
| <string name="tts_settings_title">Text-to-speech output</string> |
| <!-- On main TTS Settings screen, in default settings section, setting default speech rate for synthesized voice --> |
| <string name="tts_default_rate_title">Speech rate</string> |
| <!-- On main TTS Settings screen, summary for default speech rate for synthesized voice --> |
| <string name="tts_default_rate_summary">Speed at which the text is spoken</string> |
| <!-- On main TTS Settings screen, in default settings section, setting default pitch for synthesized voice --> |
| <string name="tts_default_pitch_title">Pitch</string> |
| <!-- On main TTS Settings screen, summary for default pitch for synthesized voice --> |
| <string name="tts_default_pitch_summary">Affects the tone of the synthesized speech</string> |
| <!-- On main TTS Settings screen, in default settings section, setting default language for synthesized voice --> |
| <string name="tts_default_lang_title">Language</string> |
| <!-- Entry in the TTS engine language/locale picker, when selected will try to default to the system language [CHAR LIMIT=50] --> |
| <string name="tts_lang_use_system">Use system language</string> |
| <!-- On main TTS Settings screen, language summary if it can't default to system language [CHAR LIMIT=50] --> |
| <string name="tts_lang_not_selected">Language not selected</string> |
| <!-- On main TTS Settings screen, summary for default language for synthesized voice --> |
| <string name="tts_default_lang_summary">Sets the language-specific voice for the spoken text</string> |
| <!-- On main TTS Settings screen, triggers playback of an example of speech synthesis --> |
| <string name="tts_play_example_title">Listen to an example</string> |
| <!-- On main TTS Settings screen, summary for triggering playback of an example of speech synthesis --> |
| <string name="tts_play_example_summary">Play a short demonstration of speech synthesis</string> |
| <!-- On main TTS Settings screen, click to install required speech synthesis data --> |
| <string name="tts_install_data_title">Install voice data</string> |
| <!-- On main TTS Settings screen, summary for click to install required speech synthesis data --> |
| <string name="tts_install_data_summary">Install the voice data required for speech synthesis</string> |
| <!-- Warning message about security implications of enabling a TTS engine, displayed as a dialog |
| message when the user selects to enable an engine. --> |
| <string name="tts_engine_security_warning">This speech synthesis engine may be able to collect |
| all the text that will be spoken, including personal data like passwords and credit |
| card numbers. It comes from the <xliff:g id="tts_plugin_engine_name">%s</xliff:g> engine. |
| Enable the use of this speech synthesis engine?</string> |
| <!-- Warning message about required internet conectivity for TTS synthesis, displayed as a dialog |
| message when the user selects to play an example for network only locale and there's no internet connectivity. --> |
| <string name="tts_engine_network_required">This language requires a working network connection for text-to-speech output.</string> |
| <!-- Text spoken by the TTS engine as an example if the engine doesn't provide sample text [CHAR LIMIT=100] --> |
| <string name="tts_default_sample_string">This is an example of speech synthesis</string> |
| <!-- On main TTS Settings screen, title of a field explaining current TTS engine status for |
| current default language [CHAR LIMIT=50] --> |
| <string name="tts_status_title">Default language status</string> |
| <!-- On main TTS Settings screen, current TTS engine status for the current default language, |
| selected language is fully supported by the engine [CHAR LIMIT=150]--> |
| <string name="tts_status_ok"><xliff:g id="locale" example="English (United States)">%1$s</xliff:g> is fully supported</string> |
| <!-- On main TTS Settings screen, current TTS engine status for the current default language, |
| selected language is supported by the engine only if there's a working network connection [CHAR LIMIT=150] --> |
| <string name="tts_status_requires_network"><xliff:g id="locale" example="English (United States)">%1$s</xliff:g> requires network connection</string> |
| <!-- On main TTS Settings screen, current TTS engine status for the current default language, |
| selected language is not supported by the engine [CHAR LIMIT=150] --> |
| <string name="tts_status_not_supported"><xliff:g id="locale" example="English (United States)">%1$s</xliff:g> is not supported</string> |
| <!-- On main TTS Settings screen, current TTS engine status for the current default language, |
| tts engine is queried for status [CHAR LIMIT=150] --> |
| <string name="tts_status_checking">Checking…</string> |
| <!-- Title for a preference in the main TTS settings screen, which |
| launches the settings screen for a given TTS engine when clicked |
| [CHAR LIMIT=30]--> |
| <string name="tts_engine_settings_title">Settings for <xliff:g id="tts_engine_name">%s</xliff:g></string> |
| <!-- [CHAR LIMIT=150] Text for screen readers / accessibility programs for |
| the image that launches the TTS engine settings when clicked. --> |
| <string name="tts_engine_settings_button">Launch engine settings</string> |
| <!-- [CHAR LIMIT=50] The text for the settings section that users to set a |
| preferred text to speech engine --> |
| <string name="tts_engine_preference_section_title">Preferred engine</string> |
| <!-- [CHAR LIMIT=50] Title of the settings section that displays general preferences |
| that are applicable to all engines, such as the speech rate --> |
| <string name="tts_general_section_title">General</string> |
| <!-- On main TTS Settings screen, in default settings section, |
| reset speech pitch of synthesized voice to 1x speech pitch. [CHAR LIMIT=50] --> |
| <string name="tts_reset_speech_pitch_title">Reset speech pitch</string> |
| <!--On main TTS Settings screen, summary for reset speech pitch of synthesized voice [CHAR LIMIT=150] --> |
| <string name="tts_reset_speech_pitch_summary">Reset the pitch at which the text is spoken to default.</string> |
| |
| <!-- Default speech rate choices --> |
| <string-array name="tts_rate_entries"> |
| <item>Very slow</item> |
| <item>Slow</item> |
| <item>Normal</item> |
| <item>Fast</item> |
| <item>Faster</item> |
| <item>Very fast</item> |
| <item>Rapid</item> |
| <item>Very rapid</item> |
| <item>Fastest</item> |
| </string-array> |
| <!-- Do not translate. --> |
| <string-array name="tts_rate_values"> |
| <item>60</item> |
| <item>80</item> |
| <item>100</item> |
| <item>150</item> |
| <item>200</item> |
| <item>250</item> |
| <item>300</item> |
| <item>350</item> |
| <item>400</item> |
| </string-array> |
| |
| <!-- Do not translate. --> |
| <string-array name="tts_demo_strings" translatable="false"> |
| <item>This is an example of speech synthesis in English.</item> |
| <item>Voici un échantillon de synthèse vocale en français.</item> |
| <item>Dies ist ein Beispiel für Sprachsynthese in Deutsch.</item> |
| <item>Questo è un esempio di sintesi vocale in italiano.</item> |
| <item>Este es un ejemplo de síntesis de voz en español.</item> |
| <item>이것은 한국어 음성 합성의 예입니다.</item> |
| </string-array> |
| <!-- Do not translate. --> |
| <string-array name="tts_demo_string_langs" translatable="false"> |
| <item>eng</item> |
| <item>fra</item> |
| <item>deu</item> |
| <item>ita</item> |
| <item>spa</item> |
| <item>kor</item> |
| </string-array> |
| |
| <!-- Title for profile selection dialog [CHAR LIMIT=30] --> |
| <string name="choose_profile">Choose Profile</string> |
| |
| <!-- Header for items under the personal user [CHAR LIMIT=30] --> |
| <string name="category_personal">Personal</string> |
| <!-- Header for items under the work user [CHAR LIMIT=30] --> |
| <string name="category_work">Work</string> |
| |
| <!-- Full package name of OEM preferred device feedback reporter. Leave this blank, overlaid in Settings/TvSettings [DO NOT TRANSLATE] --> |
| <string name="oem_preferred_feedback_reporter" translatable="false" /> |
| |
| <!-- Development settings --> |
| <skip/> |
| <!-- Development Settings. the title for the item to take the user to Development settings. Development settings are settings meant for application developers. --> |
| <string name="development_settings_title">Developer options</string> |
| <!-- Development settings enable title. --> |
| <string name="development_settings_enable">Enable developer options</string> |
| <!-- Development Settings summary. The summary of the item to take the user to Development settings. Development settings are settings meant for application developers. --> |
| <string name="development_settings_summary">Set options for app development</string> |
| <!-- Setting checkbox title for Whether to enable USB debugging support on the phone. --> |
| <!-- Error message for users that aren't allowed to modify developer options [CHAR LIMIT=none] --> |
| <string name="development_settings_not_available">Developer options are not available for this user</string> |
| <!-- Error message for users that aren't allowed to modify VPN settings [CHAR LIMIT=none] --> |
| <string name="vpn_settings_not_available">VPN settings are not available for this user</string> |
| <!-- Error message for users that aren't allowed to modify Tethering settings [CHAR LIMIT=none] --> |
| <string name="tethering_settings_not_available">Tethering settings are not available for this user</string> |
| <!-- Error message for users that aren't allowed to modify Access Point Names settings [CHAR LIMIT=none] --> |
| <string name="apn_settings_not_available">Access Point Name settings are not available for this user</string> |
| <string name="enable_adb">USB debugging</string> |
| <!-- Setting checkbox summary for Whether to enable USB debugging support on the phone --> |
| <string name="enable_adb_summary">Debug mode when USB is connected</string> |
| <!-- Setting title to revoke secure USB debugging authorizations --> |
| <string name="clear_adb_keys">Revoke USB debugging authorizations</string> |
| <!-- [CHAR LIMIT=NONE] Setting checkbox title for Whether to include bug report item in power menu. --> |
| <string name="bugreport_in_power">Bug report shortcut</string> |
| <!-- [CHAR LIMIT=NONE] Setting checkbox summary for Whether to include bug report item in power --> |
| <string name="bugreport_in_power_summary">Show a button in the power menu for taking a bug report</string> |
| <!-- Setting Checkbox title whether to keep the screen on when plugged in to a power source --> |
| <string name="keep_screen_on">Stay awake</string> |
| <!-- setting Checkbox summary whether to keep the screen on when plugged in --> |
| <string name="keep_screen_on_summary">Screen will never sleep while charging</string> |
| <!-- Setting Checkbox title whether to enable bluetooth HCI snoop log --> |
| <string name="bt_hci_snoop_log">Enable Bluetooth HCI snoop log</string> |
| <!-- setting Checkbox summary whether to capture all bluetooth HCI packets in a file --> |
| <string name="bt_hci_snoop_log_summary">Capture all bluetooth HCI packets in a file</string> |
| <!-- setting Checkbox title whether to enable OEM unlock [CHAR_LIMIT=35] --> |
| <string name="oem_unlock_enable">OEM unlocking</string> |
| <!-- setting Checkbox summary whether to enable OEM unlock [CHAR_LIMIT=50] --> |
| <string name="oem_unlock_enable_summary">Allow the bootloader to be unlocked</string> |
| <!-- Confirmation dialog title to ensure user wishes to enable OEM unlock and disable theft protection features --> |
| <string name="confirm_enable_oem_unlock_title">Allow OEM unlocking?</string> |
| <!-- Warning dialog message to confirm user wishes to enable OEM unlock and disable theft protection features --> |
| <string name="confirm_enable_oem_unlock_text">WARNING: Device protection features will not work on this device while this setting is turned on.</string> |
| |
| <!-- UI debug setting: select current app to mock location [CHAR LIMIT=50] --> |
| <string name="mock_location_app">Select mock location app</string> |
| <!-- UI debug setting: no mock location app has been set [CHAR LIMIT=50] --> |
| <string name="mock_location_app_not_set">No mock location app set</string> |
| <!-- UI debug setting: mock location app has been set [CHAR LIMIT=50] --> |
| <string name="mock_location_app_set">Mock location app: <xliff:g id="app_name">%1$s</xliff:g></string> |
| |
| <!-- Preference category for networking debugging development settings. [CHAR LIMIT=50] --> |
| <string name="debug_networking_category">Networking</string> |
| |
| <!-- Setting Checkbox title whether to show options for wireless display certification --> |
| <string name="wifi_display_certification">Wireless display certification</string> |
| <!-- Setting Checkbox title whether to enable WiFi Verbose Logging. [CHAR LIMIT=40] --> |
| <string name="wifi_verbose_logging">Enable Wi\u2011Fi Verbose Logging</string> |
| <!-- Setting Checkbox title whether to enable WiFi Aggressive Handover. [CHAR LIMIT=40] --> |
| <string name="wifi_aggressive_handover">Aggressive Wi\u2011Fi to Cellular handover</string> |
| <!-- Setting Checkbox title whether to enable WiFi Scanning in the presence of traffic. [CHAR LIMIT=80] --> |
| <string name="wifi_allow_scan_with_traffic">Always allow Wi\u2011Fi Roam Scans</string> |
| <!-- Setting Checkbox title whether to always keep cellular data active. [CHAR LIMIT=80] --> |
| <string name="mobile_data_always_on">Cellular data always active</string> |
| <!-- Setting Checkbox title for disabling Bluetooth absolute volume --> |
| <string name="bluetooth_disable_absolute_volume">Disable absolute volume</string> |
| <!-- Setting Checkbox title for enabling Bluetooth inband ringing --> |
| <string name="bluetooth_enable_inband_ringing">Enable in-band ringing</string> |
| |
| <!-- UI debug setting: Select Bluetooth AVRCP Version --> |
| <string name="bluetooth_select_avrcp_version_string">Bluetooth AVRCP Version</string> |
| <!-- UI debug setting: Select Bluetooth AVRCP Version --> |
| <string name="bluetooth_select_avrcp_version_dialog_title">Select Bluetooth AVRCP Version</string> |
| |
| <!-- UI debug setting: Select Bluetooth Audio Codec --> |
| <string name="bluetooth_select_a2dp_codec_type">Bluetooth Audio Codec</string> |
| <!-- UI debug setting: Select Bluetooth Audio Codec --> |
| <string name="bluetooth_select_a2dp_codec_type_dialog_title">Select Bluetooth Audio Codec</string> |
| |
| <!-- UI debug setting: Select Bluetooth Audio Sample Rate --> |
| <string name="bluetooth_select_a2dp_codec_sample_rate">Bluetooth Audio Sample Rate</string> |
| <!-- UI debug setting: Select Bluetooth Audio Codec: Sample Rate --> |
| <string name="bluetooth_select_a2dp_codec_sample_rate_dialog_title">Select Bluetooth Audio Codec:\u000ASample Rate</string> |
| |
| <!-- UI debug setting: Select Bluetooth Audio Bits Per Sample --> |
| <string name="bluetooth_select_a2dp_codec_bits_per_sample">Bluetooth Audio Bits Per Sample</string> |
| <!-- UI debug setting: Select Bluetooth Audio Codec: Bits Per Sample --> |
| <string name="bluetooth_select_a2dp_codec_bits_per_sample_dialog_title">Select Bluetooth Audio Codec:\u000ABits Per Sample</string> |
| |
| <!-- UI debug setting: Select Bluetooth Audio Channel Mode --> |
| <string name="bluetooth_select_a2dp_codec_channel_mode">Bluetooth Audio Channel Mode</string> |
| <!-- UI debug setting: Select Bluetooth Audio Codec: Channel Mode --> |
| <string name="bluetooth_select_a2dp_codec_channel_mode_dialog_title">Select Bluetooth Audio Codec:\u000AChannel Mode</string> |
| |
| <!-- UI debug setting: Select Bluetooth Audio LDAC Playback Quality --> |
| <string name="bluetooth_select_a2dp_codec_ldac_playback_quality">Bluetooth Audio LDAC Codec: Playback Quality</string> |
| <!-- UI debug setting: Select Bluetooth Audio LDAC Codec: LDAC Playback Quality --> |
| <string name="bluetooth_select_a2dp_codec_ldac_playback_quality_dialog_title">Select Bluetooth Audio LDAC Codec:\u000APlayback Quality</string> |
| |
| <!-- [CHAR LIMIT=NONE] Label for displaying Bluetooth Audio Codec Parameters while streaming --> |
| <string name="bluetooth_select_a2dp_codec_streaming_label">Streaming: <xliff:g id="streaming_parameter">%1$s</xliff:g></string> |
| |
| <!-- setting Checkbox summary whether to show options for wireless display certification --> |
| <string name="wifi_display_certification_summary">Show options for wireless display certification</string> |
| <!-- Setting Checkbox summary whether to enable Wifi verbose Logging [CHAR LIMIT=80] --> |
| <string name="wifi_verbose_logging_summary">Increase Wi\u2011Fi logging level, show per SSID RSSI in Wi\u2011Fi Picker</string> |
| <!-- Setting Checkbox summary whether to enable Wifi aggressive handover [CHAR LIMIT=130] --> |
| <string name="wifi_aggressive_handover_summary">When enabled, Wi\u2011Fi will be more aggressive in handing over the data connection to Cellular, when Wi\u2011Fi signal is low</string> |
| <!-- Setting Checkbox summary whether to always allow WiFi Roam Scans [CHAR LIMIT=130] --> |
| <string name="wifi_allow_scan_with_traffic_summary">Allow/Disallow Wi\u2011Fi Roam Scans based on the amount of data traffic present at the interface</string> |
| <!-- UI debug setting: limit size of Android logger buffers --> |
| <string name="select_logd_size_title">Logger buffer sizes</string> |
| <!-- UI debug setting: limit size of Android logger buffers [CHAR LIMIT=59] --> |
| <string name="select_logd_size_dialog_title">Select Logger sizes per log buffer</string> |
| <!-- UI debug setting: store logs persistently --> |
| <string name="dev_logpersist_clear_warning_title">Clear logger persistent storage?</string> |
| <!-- Warning text to user about the implications of enabling USB debugging --> |
| <string name="dev_logpersist_clear_warning_message">When we no longer are monitoring with the persistent logger, we are required to erase the logger data resident on your device.</string> |
| <!-- Title of setting: title for selection of logs to store persistently [CHAR LIMIT=60] --> |
| <string name="select_logpersist_title">Store logger data persistently on device</string> |
| <!-- UI debug setting: select which logs to store persistently [CHAR LIMIT=80] --> |
| <string name="select_logpersist_dialog_title">Select log buffers to store persistently on device</string> |
| <!-- UI debug setting: select USB configuration --> |
| <string name="select_usb_configuration_title">Select USB Configuration</string> |
| <!-- UI debug setting: limit size of Android logger buffers [CHAR LIMIT=59] --> |
| <string name="select_usb_configuration_dialog_title">Select USB Configuration</string> |
| <!-- Setting Checkbox title whether to allow mock locations --> |
| <string name="allow_mock_location">Allow mock locations</string> |
| <!-- setting Checkbox summary whether to allow mock locations --> |
| <string name="allow_mock_location_summary">Allow mock locations</string> |
| <!-- Setting Checkbox title whether to enable view attribute inspection --> |
| <string name="debug_view_attributes">Enable view attribute inspection</string> |
| <string name="mobile_data_always_on_summary">Always keep mobile data active, even when Wi\u2011Fi is active (for fast network switching).</string> |
| <!-- Title of warning dialog about the implications of enabling USB debugging --> |
| <string name="adb_warning_title">Allow USB debugging?</string> |
| <!-- Warning text to user about the implications of enabling USB debugging --> |
| <string name="adb_warning_message">USB debugging is intended for development purposes only. Use it to copy data between your computer and your device, install apps on your device without notification, and read log data.</string> |
| <!-- Message of dialog confirming that user wants to revoke access to adb from all computers they have authorized --> |
| <string name="adb_keys_warning_message">Revoke access to USB debugging from all computers you\u2019ve previously authorized?</string> |
| <!-- Title of warning dialog about the implications of enabling developer settings --> |
| <string name="dev_settings_warning_title">Allow development settings?</string> |
| <!-- Warning text to user about the implications of enabling USB debugging --> |
| <string name="dev_settings_warning_message">These settings are intended for development use only. They can cause your device and the applications on it to break or misbehave.</string> |
| <!-- Title of checkbox setting to perform package verification on apps installed over USB/ADT/ADB [CHAR LIMIT=32] --> |
| <string name="verify_apps_over_usb_title">Verify apps over USB</string> |
| <!-- Summary of checkbox setting to perform package verification on apps installed over USB/ADT/ADB [CHAR LIMIT=NONE] --> |
| <string name="verify_apps_over_usb_summary">Check apps installed via ADB/ADT for harmful behavior.</string> |
| <!-- Summary of checkbox for disabling Bluetooth absolute volume --> |
| <string name="bluetooth_disable_absolute_volume_summary">Disables the Bluetooth absolute volume feature in case of volume issues with remote devices such as unacceptably loud volume or lack of control.</string> |
| <!-- Summary of checkbox for enabling Bluetooth inband ringing --> |
| <string name="bluetooth_enable_inband_ringing_summary">Allow ringtones on the phone to be played on Bluetooth headsets</string> |
| |
| |
| <!-- Title of checkbox setting that enables the terminal app. [CHAR LIMIT=32] --> |
| <string name="enable_terminal_title">Local terminal</string> |
| <!-- Summary of checkbox setting that enables the terminal app. [CHAR LIMIT=64] --> |
| <string name="enable_terminal_summary">Enable terminal app that offers local shell access</string> |
| |
| <!-- HDCP checking title, used for debug purposes only. [CHAR LIMIT=25] --> |
| <string name="hdcp_checking_title">HDCP checking</string> |
| <!-- HDCP checking dialog title, used for debug purposes only. [CHAR LIMIT=25] --> |
| <string name="hdcp_checking_dialog_title">Set HDCP checking behavior</string> |
| |
| <!-- Preference category for app debugging development settings. [CHAR LIMIT=50] --> |
| <string name="debug_debugging_category">Debugging</string> |
| |
| <!-- UI debug setting: select current app to debug [CHAR LIMIT=50] --> |
| <string name="debug_app">Select debug app</string> |
| <!-- UI debug setting: no debug app has been set [CHAR LIMIT=50] --> |
| <string name="debug_app_not_set">No debug application set</string> |
| <!-- UI debug setting: debug app has been set [CHAR LIMIT=50] --> |
| <string name="debug_app_set">Debugging application: <xliff:g id="app_name">%1$s</xliff:g></string> |
| |
| <!-- UI debug setting: title for app picker dialog [CHAR LIMIT=50] --> |
| <string name="select_application">Select application</string> |
| <!-- UI debug setting: label for app picker to select no applicatiojn [CHAR LIMIT=50] --> |
| <string name="no_application">Nothing</string> |
| |
| <!-- UI debug setting: wait for debugger to attach to debugging process? [CHAR LIMIT=50] --> |
| <string name="wait_for_debugger">Wait for debugger</string> |
| <!-- UI debug setting: wait for debugger to attach to debugging process summary [CHAR LIMIT=500] --> |
| <string name="wait_for_debugger_summary">Debugged application waits for debugger to |
| attach before executing</string> |
| |
| <!-- Preference category for input debugging development settings. [CHAR LIMIT=25] --> |
| <string name="debug_input_category">Input</string> |
| |
| <!-- Preference category for drawing debugging development settings. [CHAR LIMIT=25] --> |
| <string name="debug_drawing_category">Drawing</string> |
| |
| <!-- Preference category for hardware accelerated drawing debugging development settings. [CHAR LIMIT=50] --> |
| <string name="debug_hw_drawing_category">Hardware accelerated rendering</string> |
| |
| <!-- Preference category for media development settings. [CHAR LIMIT=50] --> |
| <string name="media_category">Media</string> |
| |
| <!-- Preference category for monitoring debugging development settings. [CHAR LIMIT=25] --> |
| <string name="debug_monitoring_category">Monitoring</string> |
| |
| <!-- UI debug setting: always enable strict mode? [CHAR LIMIT=25] --> |
| <string name="strict_mode">Strict mode enabled</string> |
| <!-- UI debug setting: show strict mode summary [CHAR LIMIT=50] --> |
| <string name="strict_mode_summary">Flash screen when apps do long operations |
| on main thread</string> |
| |
| <!-- UI debug setting: show pointer location? [CHAR LIMIT=25] --> |
| <string name="pointer_location">Pointer location</string> |
| <!-- UI debug setting: show pointer location summary [CHAR LIMIT=50] --> |
| <string name="pointer_location_summary">Screen overlay showing current touch data</string> |
| |
| <!-- UI debug setting: show touches? [CHAR LIMIT=25] --> |
| <string name="show_touches">Show taps</string> |
| <!-- UI debug setting: show touches location summary [CHAR LIMIT=50] --> |
| <string name="show_touches_summary">Show visual feedback for taps</string> |
| |
| <!-- UI debug setting: show where surface updates happen? [CHAR LIMIT=25] --> |
| <string name="show_screen_updates">Show surface updates</string> |
| <!-- UI debug setting: show surface updates summary [CHAR LIMIT=50] --> |
| <string name="show_screen_updates_summary">Flash entire window surfaces when they update</string> |
| |
| <!-- UI debug setting: show where window updates happen with GPU rendering? [CHAR LIMIT=25] --> |
| <string name="show_hw_screen_updates">Show GPU view updates</string> |
| <!-- UI debug setting: show GPU rendering screen updates summary [CHAR LIMIT=50] --> |
| <string name="show_hw_screen_updates_summary">Flash views inside windows when drawn with the GPU</string> |
| |
| <!-- UI debug setting: show when hardware layers get updated [CHAR LIMIT=25] --> |
| <string name="show_hw_layers_updates">Show hardware layers updates</string> |
| <!-- UI debug setting: show hardware layers updates summary [CHAR LIMIT=50] --> |
| <string name="show_hw_layers_updates_summary">Flash hardware layers green when they update</string> |
| |
| <!-- UI debug setting: show the amount of overdraw in apps using the GPU [CHAR LIMIT=25] --> |
| <string name="debug_hw_overdraw">Debug GPU overdraw</string> |
| |
| <!-- UI debug setting: disable use of overlays? [CHAR LIMIT=25] --> |
| <string name="disable_overlays">Disable HW overlays</string> |
| <!-- UI debug setting: disable use of overlays summary [CHAR LIMIT=50] --> |
| <string name="disable_overlays_summary">Always use GPU for screen compositing</string> |
| |
| <!-- UI debug setting: simulate color space anomalies. [CHAR LIMIT=25] --> |
| <string name="simulate_color_space">Simulate color space</string> |
| |
| <!-- UI debug setting: enable various types of OpenGL traces [CHAR LIMIT=25] --> |
| <string name="enable_opengl_traces_title">Enable OpenGL traces</string> |
| |
| <!-- UI debug setting: disable USB audio routing title [CHAR LIMIT=32] --> |
| <string name="usb_audio_disable_routing">Disable USB audio routing</string> |
| <!-- UI debug setting: disable USB audio routing summary [CHAR LIMIT=50] --> |
| <string name="usb_audio_disable_routing_summary">Disable automatic routing to USB audio peripherals</string> |
| |
| <!-- UI debug setting: show layout bounds information [CHAR LIMIT=25] --> |
| <string name="debug_layout">Show layout bounds</string> |
| <!-- UI debug setting: show layout bounds information summary [CHAR LIMIT=50] --> |
| <string name="debug_layout_summary">Show clip bounds, margins, etc.</string> |
| |
| <!-- UI debug setting: force right to left layout [CHAR LIMIT=37] --> |
| <string name="force_rtl_layout_all_locales">Force RTL layout direction</string> |
| <!-- UI debug setting: force right to left layout summary [CHAR LIMIT=100] --> |
| <string name="force_rtl_layout_all_locales_summary">Force screen layout direction to RTL for all locales</string> |
| |
| <!-- UI debug setting: force hardware acceleration to render apps [CHAR LIMIT=25] --> |
| <string name="force_hw_ui">Force GPU rendering</string> |
| <!-- UI debug setting: force hardware acceleration summary [CHAR LIMIT=50] --> |
| <string name="force_hw_ui_summary">Force use of GPU for 2d drawing</string> |
| |
| <!-- UI debug setting: force anti-aliasing to render apps [CHAR LIMIT=25] --> |
| <string name="force_msaa">Force 4x MSAA</string> |
| <!-- UI debug setting: force anti-aliasing summary [CHAR LIMIT=50] --> |
| <string name="force_msaa_summary">Enable 4x MSAA in OpenGL ES 2.0 apps</string> |
| |
| <!-- UI debug setting: show when non-rectangular clip operations are used [CHAR LIMIT=100] --> |
| <string name="show_non_rect_clip">Debug non-rectangular clip operations</string> |
| |
| <!-- UI debug setting: profile time taken by hardware acceleration to render apps [CHAR LIMIT=25] --> |
| <string name="track_frame_time">Profile GPU rendering</string> |
| |
| <!-- UI debug setting: scaling factor for window animations [CHAR LIMIT=25] --> |
| <string name="window_animation_scale_title">Window animation scale</string> |
| |
| <!-- UI debug setting: scaling factor for transition animations [CHAR LIMIT=25] --> |
| <string name="transition_animation_scale_title">Transition animation scale</string> |
| |
| <!-- UI debug setting: scaling factor for all Animator-based animations [CHAR LIMIT=25] --> |
| <string name="animator_duration_scale_title">Animator duration scale</string> |
| |
| <!-- UI debug setting: simulate secondary display devices using overlays [CHAR LIMIT=25] --> |
| <string name="overlay_display_devices_title">Simulate secondary displays</string> |
| |
| <!-- Preference category for application debugging development settings. [CHAR LIMIT=25] --> |
| <string name="debug_applications_category">Apps</string> |
| |
| <!-- UI debug setting: immediately destroy activities? [CHAR LIMIT=25] --> |
| <string name="immediately_destroy_activities">Don\u2019t keep activities</string> |
| <!-- UI debug setting: immediately destroy activities summary [CHAR LIMIT=50] --> |
| <string name="immediately_destroy_activities_summary">Destroy every activity as soon as |
| the user leaves it</string> |
| |
| <!-- UI debug setting: limit number of running background processes [CHAR LIMIT=25] --> |
| <string name="app_process_limit_title">Background process limit</string> |
| |
| <!-- UI debug setting: show all ANRs? [CHAR LIMIT=25] --> |
| <string name="show_all_anrs">Show all ANRs</string> |
| <!-- UI debug setting: show all ANRs summary [CHAR LIMIT=50] --> |
| <string name="show_all_anrs_summary">Show App Not Responding dialog |
| for background apps</string> |
| |
| <!-- UI debug setting: force allow apps on external storage [CHAR LIMIT=50] --> |
| <string name="force_allow_on_external">Force allow apps on external</string> |
| <!-- UI debug setting: force allow on external summary [CHAR LIMIT=150] --> |
| <string name="force_allow_on_external_summary">Makes any app eligible to be written to external storage, regardless of manifest values</string> |
| |
| <!-- UI debug setting: force all activites to be resizable for multiwindow [CHAR LIMIT=50] --> |
| <string name="force_resizable_activities">Force activities to be resizable</string> |
| <!-- UI debug setting: force allow on external summary [CHAR LIMIT=150] --> |
| <string name="force_resizable_activities_summary">Make all activities resizable for multi-window, regardless of manifest values.</string> |
| |
| <!-- UI debug setting: enable freeform window support [CHAR LIMIT=50] --> |
| <string name="enable_freeform_support">Enable freeform windows</string> |
| <!-- UI debug setting: enable freeform window support summary [CHAR LIMIT=150] --> |
| <string name="enable_freeform_support_summary">Enable support for experimental freeform windows.</string> |
| |
| <!-- Local (desktop) backup password menu title [CHAR LIMIT=25] --> |
| <string name="local_backup_password_title">Desktop backup password</string> |
| <!-- Summary text of the "local backup password" setting when the user has not supplied a password --> |
| <string name="local_backup_password_summary_none">Desktop full backups aren\u2019t currently protected</string> |
| <!-- Summary text of the "local backup password" setting when the user has already supplied a password --> |
| <string name="local_backup_password_summary_change">Tap to change or remove the password for desktop full backups</string> |
| |
| <!-- Toast message shown when the user successfully sets a new local backup password [CHAR LIMIT=80] --> |
| <string name="local_backup_password_toast_success">New backup password set</string> |
| <!-- Toast message shown when setting a new local backup password fails due to the user not correctly typing the password again for confirmation [CHAR LIMIT=80] --> |
| <string name="local_backup_password_toast_confirmation_mismatch">New password and confirmation don\u2019t match</string> |
| <!-- Toast message shown when setting a new local backup password fails due to the user not supplying the correct existing password. The phrasing here is deliberately quite general. [CHAR LIMIT=80] --> |
| <string name="local_backup_password_toast_validation_failure">Failure setting backup password</string> |
| |
| <!-- Name of each color mode for the display. [CHAR LIMIT=40] --> |
| <string-array name="color_mode_names"> |
| <item>Vibrant (default)</item> |
| <item>Natural</item> |
| <item>Standard</item> |
| </string-array> |
| |
| <!-- Description of each color mode for the display. [CHAR LIMIT=NONE] --> |
| <string-array name="color_mode_descriptions"> |
| <item>Enhanced colors</item> |
| <item>Natural colors as seen by the eye</item> |
| <item>Colors optimized for digital content</item> |
| </string-array> |
| |
| <!-- Settings item title for inactive apps [CHAR LIMIT=35] --> |
| <string name="inactive_apps_title">Inactive apps</string> |
| <!-- Settings item summary for inactive app [CHAR LIMIT=100] --> |
| <string name="inactive_app_inactive_summary">Inactive. Tap to toggle.</string> |
| <!-- Settings item summary for active app [CHAR LIMIT=100] --> |
| <string name="inactive_app_active_summary">Active. Tap to toggle.</string> |
| |
| <!-- Services settings screen, setting option name for the user to go to the screen to view running services --> |
| <string name="runningservices_settings_title">Running services</string> |
| <!-- Services settings screen, setting option summary for the user to go to the screen to view running services --> |
| <string name="runningservices_settings_summary">View and control currently running services</string> |
| |
| <!-- Developer settings: enable WebView multiprocess name [CHAR LIMIT=50] --> |
| <string name="enable_webview_multiprocess">Multiprocess WebView</string> |
| <!-- Developer settings: enable WebView multiprocess summary [CHAR LIMIT=60] --> |
| <string name="enable_webview_multiprocess_desc">Run WebView renderers separately</string> |
| |
| <!-- Developer settings: select WebView provider title [CHAR LIMIT=30] --> |
| <string name="select_webview_provider_title">WebView implementation</string> |
| <!-- Developer settings: select WebView provider dialog title [CHAR LIMIT=30] --> |
| <string name="select_webview_provider_dialog_title">Set WebView implementation</string> |
| <!-- Developer settings: text for the WebView provider selection toast shown if an invalid provider was chosen (i.e. the setting list was stale). [CHAR LIMIT=NONE] --> |
| <string name="select_webview_provider_toast_text">This choice is no longer valid. Try again.</string> |
| |
| <!-- Developer settings screen, convert userdata to file encryption option name --> |
| <string name="convert_to_file_encryption">Convert to file encryption</string> |
| <!-- Developer settings screen, convert userdata to file encryption summary when option is available --> |
| <string name="convert_to_file_encryption_enabled">Convert\u2026</string> |
| <!-- Developer settings screen, convert userdata to file encryption summary when option is already done --> |
| <string name="convert_to_file_encryption_done">Already file encrypted</string> |
| <!-- Title used on dialog with final prompt for converting to file encryption --> |
| <string name="title_convert_fbe">Converting to file based encryption</string> |
| <!-- Warning displayed on dialog with final prompt for converting to file encryption --> |
| <string name="convert_to_fbe_warning"> |
| Convert data partition to file based encryption.\n |
| !!Warning!! This will erase all your data.\n |
| This feature is alpha, and may not work correctly.\n |
| Press \'Wipe and convert\u2026\' to continue.</string> |
| <!-- Button on dialog that triggers convertion to file encryption --> |
| <string name="button_convert_fbe">Wipe and convert\u2026</string> |
| |
| <!-- Name of feature to change color setting for the display [CHAR LIMIT=60] --> |
| <string name="picture_color_mode">Picture color mode</string> |
| |
| <!-- Description of feature to change color setting for the display [CHAR LIMIT=NONE] --> |
| <string name="picture_color_mode_desc">Use sRGB</string> |
| |
| <!-- Label for disabling color space adjustment [CHAR LIMIT=45] --> |
| <string name="daltonizer_mode_disabled">Disabled</string> |
| <!-- Label for converting display colors to grayscale, which simulates monochromacy (complete color blindness). [CHAR LIMIT=45] --> |
| <string name="daltonizer_mode_monochromacy">Monochromacy</string> |
| <!-- Label for deuteranomaly (red-green color blindness) [CHAR LIMIT=45] --> |
| <string name="daltonizer_mode_deuteranomaly">Deuteranomaly (red-green)</string> |
| <!-- Label for protanomaly (red-green color blindness) [CHAR LIMIT=45] --> |
| <string name="daltonizer_mode_protanomaly">Protanomaly (red-green)</string> |
| <!-- Label for tritanomaly (blue-yellow color blindness) [CHAR LIMIT=45] --> |
| <string name="daltonizer_mode_tritanomaly">Tritanomaly (blue-yellow)</string> |
| |
| <!-- Title for the accessibility preference to configure display color space correction. [CHAR LIMIT=NONE] --> |
| <string name="accessibility_display_daltonizer_preference_title">Color correction</string> |
| <!-- Subtitle for the accessibility preference to configure display color space correction. [CHAR LIMIT=NONE] --> |
| <string name="accessibility_display_daltonizer_preference_subtitle">This feature is experimental and may affect performance.</string> |
| <!-- Summary shown for color space correction preference when its value is overridden by another preference [CHAR LIMIT=35] --> |
| <string name="daltonizer_type_overridden">Overridden by <xliff:g id="title" example="Simulate color space">%1$s</xliff:g></string> |
| |
| <!-- [CHAR_LIMIT=40] Label for estimated remaining duration of battery charging/discharging --> |
| <string name="power_remaining_duration_only">Approx. <xliff:g id="time">%1$s</xliff:g> left</string> |
| |
| <!-- [CHAR_LIMIT=40] Short label for estimated remaining duration of battery charging/discharging --> |
| <string name="power_remaining_duration_only_short"><xliff:g id="time">%1$s</xliff:g> left</string> |
| |
| <!-- [CHAR_LIMIT=40] Label for battery level chart when discharging with duration --> |
| <string name="power_discharging_duration"><xliff:g id="level">%1$s</xliff:g> |
| - approx. <xliff:g id="time">%2$s</xliff:g> left</string> |
| |
| <!-- [CHAR_LIMIT=40] Label for battery level chart when discharging with duration --> |
| <string name="power_discharging_duration_short"><xliff:g id="level">%1$s</xliff:g> |
| - <xliff:g id="time">%2$s</xliff:g> left</string> |
| |
| <!-- [CHAR_LIMIT=40] Label for battery level chart when charging --> |
| <string name="power_charging"><xliff:g id="level">%1$s</xliff:g> - |
| <xliff:g id="state">%2$s</xliff:g></string> |
| <!-- [CHAR_LIMIT=40] Label for battery level chart when charging with duration --> |
| <string name="power_charging_duration"><xliff:g id="level">%1$s</xliff:g> - |
| <xliff:g id="time">%2$s</xliff:g> until full</string> |
| <!-- [CHAR_LIMIT=40] Short label for battery level chart when charging with duration --> |
| <string name="power_charging_duration_short"><xliff:g id="level">%1$s</xliff:g> - |
| <xliff:g id="time">%2$s</xliff:g></string> |
| <!-- [CHAR_LIMIT=40] Label for battery level chart when charging with duration --> |
| <string name="power_charging_duration_ac"><xliff:g id="level">%1$s</xliff:g> - |
| <xliff:g id="time">%2$s</xliff:g> until full on AC</string> |
| <!-- [CHAR_LIMIT=40] Short label for battery level chart when charging with duration --> |
| <string name="power_charging_duration_ac_short"><xliff:g id="level">%1$s</xliff:g> - |
| <xliff:g id="time">%2$s</xliff:g></string> |
| <!-- [CHAR_LIMIT=40] Label for battery level chart when charging with duration --> |
| <string name="power_charging_duration_usb"><xliff:g id="level">%1$s</xliff:g> - |
| <xliff:g id="time">%2$s</xliff:g> until full over USB</string> |
| <!-- [CHAR_LIMIT=40] Short label for battery level chart when charging with duration --> |
| <string name="power_charging_duration_usb_short"><xliff:g id="level">%1$s</xliff:g> - |
| <xliff:g id="time">%2$s</xliff:g></string> |
| <!-- [CHAR_LIMIT=40] Label for battery level chart when charging with duration --> |
| <string name="power_charging_duration_wireless"><xliff:g id="level">%1$s</xliff:g> - |
| <xliff:g id="time">%2$s</xliff:g> until full from wireless</string> |
| <!-- [CHAR_LIMIT=40] Label for battery level chart when charging with duration --> |
| <string name="power_charging_duration_wireless_short"><xliff:g id="level">%1$s</xliff:g> - |
| <xliff:g id="time">%2$s</xliff:g></string> |
| |
| <!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed --> |
| <string name="battery_info_status_unknown">Unknown</string> |
| <!-- [CHAR_LIMIT=20] Battery use screen. Battery status shown in chart label when charging from an unknown source. --> |
| <string name="battery_info_status_charging">Charging</string> |
| <!-- [CHAR_LIMIT=20] Battery use screen. Battery status shown in chart label when charging on AC. --> |
| <string name="battery_info_status_charging_ac">Charging on AC</string> |
| <!-- [CHAR_LIMIT=20] Battery short status label when charing on AC --> |
| <string name="battery_info_status_charging_ac_short">Charging</string> |
| <!-- [CHAR_LIMIT=20] Battery use screen. Battery status shown in chart label when charging over USB. --> |
| <string name="battery_info_status_charging_usb">Charging over USB</string> |
| <!-- [CHAR_LIMIT=20] Battery short status label when charging over USB. --> |
| <string name="battery_info_status_charging_usb_short">Charging</string> |
| <!-- [CHAR_LIMIT=20] Battery use screen. Battery status shown in chart label when charging over a wireless connection. --> |
| <string name="battery_info_status_charging_wireless">Charging wirelessly</string> |
| <!-- [CHAR_LIMIT=20] Battery short status label when charging wirelessly. --> |
| <string name="battery_info_status_charging_wireless_short">Charging</string> |
| <!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed --> |
| <string name="battery_info_status_discharging">Not charging</string> |
| <!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed --> |
| <string name="battery_info_status_not_charging">Not charging</string> |
| <!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed --> |
| <string name="battery_info_status_full">Full</string> |
| |
| <!-- Summary for settings preference disabled by administrator [CHAR LIMIT=50] --> |
| <string name="disabled_by_admin_summary_text">Controlled by admin</string> |
| |
| <!-- Summary for switch preference to denote it is switched on [CHAR LIMIT=50] --> |
| <string name="enabled_by_admin">Enabled by administrator</string> |
| <!-- Summary for switch preference to denote it is switched off [CHAR LIMIT=50] --> |
| <string name="disabled_by_admin">Disabled by administrator</string> |
| |
| <!-- Option in navigation drawer that leads to Settings main screen [CHAR LIMIT=30] --> |
| <string name="home">Settings Home</string> |
| |
| <!-- Labels on the side of batter graph in Quick Settings and Settings [CHAR LIMIT=8] --> |
| <string-array name="battery_labels"> |
| <item>0%</item> |
| <item>50%</item> |
| <item>100%</item> |
| </string-array> |
| |
| <!-- Label for length of time since the battery graph started [CHAR LIMIT=20] --> |
| <string name="charge_length_format"><xliff:g name="time" example="3 hours">%1$s</xliff:g> ago</string> |
| |
| <!-- Label for length of time until battery is charged [CHAR LIMIT=20] --> |
| <string name="remaining_length_format"><xliff:g name="time" example="3 hours">%1$s</xliff:g> left</string> |
| |
| <!-- Hint text for the IP address --> |
| <string name="wifi_ip_address_hint" translatable="false">192.168.1.128</string> |
| <!-- Hint text for DNS --> |
| <string name="wifi_dns1_hint" translatable="false">8.8.8.8</string> |
| <!-- Hint text for DNS --> |
| <string name="wifi_dns2_hint" translatable="false">8.8.4.4</string> |
| <!-- Hint text for the gateway --> |
| <string name="wifi_gateway_hint" translatable="false">192.168.1.1</string> |
| <!-- Hint text for network prefix length --> |
| <string name="wifi_network_prefix_length_hint" translatable="false">24</string> |
| <!-- HTTP proxy settings. The hint text field for port. --> |
| <string name="proxy_port_hint" translatable="false">8080</string> |
| <!-- HTTP proxy settings. Hint for Proxy-Auto Config URL. --> |
| <string name="proxy_url_hint" translatable="false">https://www.example.com/proxy.pac</string> |
| <!-- HTTP proxy settings. The hint text for proxy exclusion list. --> |
| <string name="proxy_exclusionlist_hint" translatable="false">example.com,mycomp.test.com,localhost</string> |
| <!-- HTTP proxy settings. The hint text field for the hostname. --> |
| <string name="proxy_hostname_hint" translatable="false">proxy.example.com</string> |
| |
| <!-- Description for the screen zoom level that makes interface elements small. [CHAR LIMIT=24] --> |
| <string name="screen_zoom_summary_small">Small</string> |
| <!-- Description for the device's default screen zoom level. [CHAR LIMIT=24] --> |
| <string name="screen_zoom_summary_default">Default</string> |
| <!-- Description for the screen zoom level that makes interface elements large. [CHAR LIMIT=24] --> |
| <string name="screen_zoom_summary_large">Large</string> |
| <!-- Description for the screen zoom level that makes interface elements larger. [CHAR LIMIT=24] --> |
| <string name="screen_zoom_summary_very_large">Larger</string> |
| <!-- Description for the screen zoom level that makes interface elements largest. [CHAR LIMIT=24] --> |
| <string name="screen_zoom_summary_extremely_large">Largest</string> |
| <!-- Description for a custom screen zoom level. This shows the requested display |
| density in raw pixels per inch rather than using a relative description. [CHAR LIMIT=24] --> |
| <string name="screen_zoom_summary_custom">Custom (<xliff:g id="densityDpi" example="160">%d</xliff:g>)</string> |
| <!-- Label for Help and feedback menu item --> |
| <string name="help_feedback_label">Help & feedback</string> |
| |
| <!-- Content description for drawer menu button [CHAR_LIMIT=30]--> |
| <string name="content_description_menu_button">Menu</string> |
| |
| <!-- Label for carrier demo mode factory reset confirmation dialog. [CHAR LIMIT=40] --> |
| <string name="retail_demo_reset_message">Enter password to perform factory reset in demo mode</string> |
| <!-- Label for positive button on carrier demo mode factory reset confirmation dialog [CHAR LIMIT=40] --> |
| <string name="retail_demo_reset_next">Next</string> |
| <!-- Title for carrier demo mode factory reset confirmation dialog. [CHAR LIMIT=40] --> |
| <string name="retail_demo_reset_title">Password required</string> |
| </resources> |