| /* |
| * Copyright (C) 2016 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "dumpstate" |
| #include <cutils/log.h> |
| |
| #include "DumpstateService.h" |
| #include "android/os/BnDumpstate.h" |
| #include "dumpstate.h" |
| |
| #include <gmock/gmock.h> |
| #include <gtest/gtest.h> |
| |
| #include <libgen.h> |
| #include <signal.h> |
| #include <sys/types.h> |
| #include <unistd.h> |
| #include <thread> |
| |
| #include <android-base/file.h> |
| #include <android-base/properties.h> |
| #include <android-base/stringprintf.h> |
| #include <android-base/strings.h> |
| |
| using namespace android; |
| |
| using ::testing::EndsWith; |
| using ::testing::IsEmpty; |
| using ::testing::StrEq; |
| using ::testing::StartsWith; |
| using ::testing::Test; |
| using ::testing::internal::CaptureStderr; |
| using ::testing::internal::CaptureStdout; |
| using ::testing::internal::GetCapturedStderr; |
| using ::testing::internal::GetCapturedStdout; |
| |
| using os::DumpstateService; |
| using os::IDumpstateListener; |
| |
| // Not used on test cases yet... |
| void dumpstate_board(void) { |
| } |
| |
| class DumpstateListenerMock : public IDumpstateListener { |
| public: |
| MOCK_METHOD1(onProgressUpdated, binder::Status(int32_t progress)); |
| MOCK_METHOD1(onMaxProgressUpdated, binder::Status(int32_t max_progress)); |
| |
| protected: |
| MOCK_METHOD0(onAsBinder, IBinder*()); |
| }; |
| |
| class DumpstateTest : public Test { |
| public: |
| void SetUp() { |
| SetDryRun(false); |
| SetBuildType(android::base::GetProperty("ro.build.type", "(unknown)")); |
| ds.update_progress_ = false; |
| } |
| |
| // Runs a command and capture `stdout` and `stderr`. |
| int RunCommand(const std::string& title, const std::vector<std::string>& full_command, |
| const CommandOptions& options = CommandOptions::DEFAULT) { |
| CaptureStdout(); |
| CaptureStderr(); |
| int status = ds.RunCommand(title, full_command, options); |
| out = GetCapturedStdout(); |
| err = GetCapturedStderr(); |
| return status; |
| } |
| |
| // Dumps a file and capture `stdout` and `stderr`. |
| int DumpFile(const std::string& title, const std::string& path) { |
| CaptureStdout(); |
| CaptureStderr(); |
| int status = ds.DumpFile(title, path); |
| out = GetCapturedStdout(); |
| err = GetCapturedStderr(); |
| return status; |
| } |
| |
| void SetDryRun(bool dry_run) { |
| ALOGD("Setting dry_run_ to %s\n", dry_run ? "true" : "false"); |
| ds.dry_run_ = dry_run; |
| } |
| |
| void SetBuildType(const std::string& build_type) { |
| ALOGD("Setting build_type_ to '%s'\n", build_type.c_str()); |
| ds.build_type_ = build_type; |
| } |
| |
| bool IsUserBuild() { |
| return "user" == android::base::GetProperty("ro.build.type", "(unknown)"); |
| } |
| |
| void DropRoot() { |
| drop_root_user(); |
| uid_t uid = getuid(); |
| ASSERT_EQ(2000, (int)uid); |
| } |
| |
| // TODO: remove when progress is set by Binder callbacks. |
| void AssertSystemProperty(const std::string& key, const std::string& expected_value) { |
| std::string actualValue = android::base::GetProperty(key, "not set"); |
| EXPECT_THAT(expected_value, StrEq(actualValue)) << "invalid value for property " << key; |
| } |
| |
| // TODO: remove when progress is set by Binder callbacks. |
| std::string GetProgressMessageAndAssertSystemProperties(int progress, int weight_total, |
| int old_weight_total = 0) { |
| EXPECT_EQ(progress, ds.progress_) << "invalid progress"; |
| EXPECT_EQ(weight_total, ds.weight_total_) << "invalid weight_total"; |
| |
| AssertSystemProperty(android::base::StringPrintf("dumpstate.%d.progress", getpid()), |
| std::to_string(progress)); |
| |
| bool max_increased = old_weight_total > 0; |
| |
| std::string adjustment_message = ""; |
| if (max_increased) { |
| AssertSystemProperty(android::base::StringPrintf("dumpstate.%d.max", getpid()), |
| std::to_string(weight_total)); |
| adjustment_message = android::base::StringPrintf( |
| "Adjusting total weight from %d to %d\n", old_weight_total, weight_total); |
| } |
| |
| return android::base::StringPrintf("%sSetting progress (dumpstate.%d.progress): %d/%d\n", |
| adjustment_message.c_str(), getpid(), progress, |
| weight_total); |
| } |
| |
| std::string GetProgressMessage(const std::string& listener_name, int progress, int weight_total, |
| int old_weight_total = 0) { |
| EXPECT_EQ(progress, ds.progress_) << "invalid progress"; |
| EXPECT_EQ(weight_total, ds.weight_total_) << "invalid weight_total"; |
| |
| bool max_increased = old_weight_total > 0; |
| |
| std::string adjustment_message = ""; |
| if (max_increased) { |
| adjustment_message = android::base::StringPrintf( |
| "Adjusting total weight from %d to %d\n", old_weight_total, weight_total); |
| } |
| |
| return android::base::StringPrintf("%sSetting progress (%s): %d/%d\n", |
| adjustment_message.c_str(), listener_name.c_str(), |
| progress, weight_total); |
| } |
| |
| // `stdout` and `stderr` from the last command ran. |
| std::string out, err; |
| |
| std::string test_path = dirname(android::base::GetExecutablePath().c_str()); |
| std::string fixtures_path = test_path + "/../dumpstate_test_fixture/"; |
| std::string test_data_path = fixtures_path + "/testdata/"; |
| std::string simple_command = fixtures_path + "dumpstate_test_fixture"; |
| std::string echo_command = "/system/bin/echo"; |
| |
| Dumpstate& ds = Dumpstate::GetInstance(); |
| }; |
| |
| TEST_F(DumpstateTest, RunCommandNoArgs) { |
| EXPECT_EQ(-1, RunCommand("", {})); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandNoTitle) { |
| EXPECT_EQ(0, RunCommand("", {simple_command})); |
| EXPECT_THAT(out, StrEq("stdout\n")); |
| EXPECT_THAT(err, StrEq("stderr\n")); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandWithTitle) { |
| EXPECT_EQ(0, RunCommand("I AM GROOT", {simple_command})); |
| EXPECT_THAT(err, StrEq("stderr\n")); |
| // We don't know the exact duration, so we check the prefix and suffix |
| EXPECT_THAT(out, |
| StartsWith("------ I AM GROOT (" + simple_command + ") ------\nstdout\n------")); |
| EXPECT_THAT(out, EndsWith("s was the duration of 'I AM GROOT' ------\n")); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandWithLoggingMessage) { |
| EXPECT_EQ( |
| 0, RunCommand("", {simple_command}, |
| CommandOptions::WithTimeout(10).Log("COMMAND, Y U NO LOG FIRST?").Build())); |
| EXPECT_THAT(out, StrEq("stdout\n")); |
| EXPECT_THAT(err, StrEq("COMMAND, Y U NO LOG FIRST?stderr\n")); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandRedirectStderr) { |
| EXPECT_EQ(0, RunCommand("", {simple_command}, |
| CommandOptions::WithTimeout(10).RedirectStderr().Build())); |
| EXPECT_THAT(out, IsEmpty()); |
| EXPECT_THAT(err, StrEq("stdout\nstderr\n")); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandWithOneArg) { |
| EXPECT_EQ(0, RunCommand("", {echo_command, "one"})); |
| EXPECT_THAT(err, IsEmpty()); |
| EXPECT_THAT(out, StrEq("one\n")); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandWithMultipleArgs) { |
| EXPECT_EQ(0, RunCommand("", {echo_command, "one", "is", "the", "loniest", "number"})); |
| EXPECT_THAT(err, IsEmpty()); |
| EXPECT_THAT(out, StrEq("one is the loniest number\n")); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandDryRun) { |
| SetDryRun(true); |
| EXPECT_EQ(0, RunCommand("I AM GROOT", {simple_command})); |
| // We don't know the exact duration, so we check the prefix and suffix |
| EXPECT_THAT(out, StartsWith("------ I AM GROOT (" + simple_command + |
| ") ------\n\t(skipped on dry run)\n------")); |
| EXPECT_THAT(out, EndsWith("s was the duration of 'I AM GROOT' ------\n")); |
| EXPECT_THAT(err, IsEmpty()); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandDryRunNoTitle) { |
| SetDryRun(true); |
| EXPECT_EQ(0, RunCommand("", {simple_command})); |
| EXPECT_THAT(out, IsEmpty()); |
| EXPECT_THAT(err, IsEmpty()); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandDryRunAlways) { |
| SetDryRun(true); |
| EXPECT_EQ(0, RunCommand("", {simple_command}, CommandOptions::WithTimeout(10).Always().Build())); |
| EXPECT_THAT(out, StrEq("stdout\n")); |
| EXPECT_THAT(err, StrEq("stderr\n")); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandNotFound) { |
| EXPECT_NE(0, RunCommand("", {"/there/cannot/be/such/command"})); |
| EXPECT_THAT(out, StartsWith("*** command '/there/cannot/be/such/command' failed: exit code")); |
| EXPECT_THAT(err, StartsWith("execvp on command '/there/cannot/be/such/command' failed")); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandFails) { |
| EXPECT_EQ(42, RunCommand("", {simple_command, "--exit", "42"})); |
| EXPECT_THAT(out, StrEq("stdout\n*** command '" + simple_command + |
| " --exit 42' failed: exit code 42\n")); |
| EXPECT_THAT(err, StrEq("stderr\n*** command '" + simple_command + |
| " --exit 42' failed: exit code 42\n")); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandCrashes) { |
| EXPECT_NE(0, RunCommand("", {simple_command, "--crash"})); |
| // We don't know the exit code, so check just the prefix. |
| EXPECT_THAT( |
| out, StartsWith("stdout\n*** command '" + simple_command + " --crash' failed: exit code")); |
| EXPECT_THAT( |
| err, StartsWith("stderr\n*** command '" + simple_command + " --crash' failed: exit code")); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandTimesout) { |
| EXPECT_EQ(-1, RunCommand("", {simple_command, "--sleep", "2"}, |
| CommandOptions::WithTimeout(1).Build())); |
| EXPECT_THAT(out, StartsWith("stdout line1\n*** command '" + simple_command + |
| " --sleep 2' timed out after 1")); |
| EXPECT_THAT(err, StartsWith("sleeping for 2s\n*** command '" + simple_command + |
| " --sleep 2' timed out after 1")); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandIsKilled) { |
| CaptureStdout(); |
| CaptureStderr(); |
| |
| std::thread t([=]() { |
| EXPECT_EQ(SIGTERM, ds.RunCommand("", {simple_command, "--pid", "--sleep", "20"}, |
| CommandOptions::WithTimeout(100).Always().Build())); |
| }); |
| |
| // Capture pid and pre-sleep output. |
| sleep(1); // Wait a little bit to make sure pid and 1st line were printed. |
| std::string err = GetCapturedStderr(); |
| EXPECT_THAT(err, StrEq("sleeping for 20s\n")); |
| |
| std::string out = GetCapturedStdout(); |
| std::vector<std::string> lines = android::base::Split(out, "\n"); |
| ASSERT_EQ(3, (int)lines.size()) << "Invalid lines before sleep: " << out; |
| |
| int pid = atoi(lines[0].c_str()); |
| EXPECT_THAT(lines[1], StrEq("stdout line1")); |
| EXPECT_THAT(lines[2], IsEmpty()); // \n |
| |
| // Then kill the process. |
| CaptureStdout(); |
| CaptureStderr(); |
| ASSERT_EQ(0, kill(pid, SIGTERM)) << "failed to kill pid " << pid; |
| t.join(); |
| |
| // Finally, check output after murder. |
| out = GetCapturedStdout(); |
| err = GetCapturedStderr(); |
| |
| EXPECT_THAT(out, StrEq("*** command '" + simple_command + |
| " --pid --sleep 20' failed: killed by signal 15\n")); |
| EXPECT_THAT(err, StrEq("*** command '" + simple_command + |
| " --pid --sleep 20' failed: killed by signal 15\n")); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandProgressNoListener) { |
| ds.update_progress_ = true; |
| ds.progress_ = 0; |
| ds.weight_total_ = 30; |
| |
| EXPECT_EQ(0, RunCommand("", {simple_command}, CommandOptions::WithTimeout(20).Build())); |
| std::string progress_message = GetProgressMessageAndAssertSystemProperties(20, 30); |
| EXPECT_THAT(out, StrEq("stdout\n")); |
| EXPECT_THAT(err, StrEq("stderr\n" + progress_message)); |
| |
| EXPECT_EQ(0, RunCommand("", {simple_command}, CommandOptions::WithTimeout(10).Build())); |
| progress_message = GetProgressMessageAndAssertSystemProperties(30, 30); |
| EXPECT_THAT(out, StrEq("stdout\n")); |
| EXPECT_THAT(err, StrEq("stderr\n" + progress_message)); |
| |
| // Run a command that will increase maximum timeout. |
| EXPECT_EQ(0, RunCommand("", {simple_command}, CommandOptions::WithTimeout(1).Build())); |
| progress_message = GetProgressMessageAndAssertSystemProperties(31, 36, 30); // 20% increase |
| EXPECT_THAT(out, StrEq("stdout\n")); |
| EXPECT_THAT(err, StrEq("stderr\n" + progress_message)); |
| |
| // Make sure command ran while in dry_run is counted. |
| SetDryRun(true); |
| EXPECT_EQ(0, RunCommand("", {simple_command}, CommandOptions::WithTimeout(4).Build())); |
| progress_message = GetProgressMessageAndAssertSystemProperties(35, 36); |
| EXPECT_THAT(out, IsEmpty()); |
| EXPECT_THAT(err, StrEq(progress_message)); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandProgress) { |
| sp<DumpstateListenerMock> listener(new DumpstateListenerMock()); |
| ds.listener_ = listener; |
| ds.listener_name_ = "FoxMulder"; |
| |
| ds.update_progress_ = true; |
| ds.progress_ = 0; |
| ds.weight_total_ = 30; |
| |
| EXPECT_CALL(*listener, onProgressUpdated(20)); |
| EXPECT_EQ(0, RunCommand("", {simple_command}, CommandOptions::WithTimeout(20).Build())); |
| std::string progress_message = GetProgressMessage(ds.listener_name_, 20, 30); |
| EXPECT_THAT(out, StrEq("stdout\n")); |
| EXPECT_THAT(err, StrEq("stderr\n" + progress_message)); |
| |
| EXPECT_CALL(*listener, onProgressUpdated(30)); |
| EXPECT_EQ(0, RunCommand("", {simple_command}, CommandOptions::WithTimeout(10).Build())); |
| progress_message = GetProgressMessage(ds.listener_name_, 30, 30); |
| EXPECT_THAT(out, StrEq("stdout\n")); |
| EXPECT_THAT(err, StrEq("stderr\n" + progress_message)); |
| |
| // Run a command that will increase maximum timeout. |
| EXPECT_CALL(*listener, onProgressUpdated(31)); |
| EXPECT_CALL(*listener, onMaxProgressUpdated(36)); |
| EXPECT_EQ(0, RunCommand("", {simple_command}, CommandOptions::WithTimeout(1).Build())); |
| progress_message = GetProgressMessage(ds.listener_name_, 31, 36, 30); // 20% increase |
| EXPECT_THAT(out, StrEq("stdout\n")); |
| EXPECT_THAT(err, StrEq("stderr\n" + progress_message)); |
| |
| // Make sure command ran while in dry_run is counted. |
| SetDryRun(true); |
| EXPECT_CALL(*listener, onProgressUpdated(35)); |
| EXPECT_EQ(0, RunCommand("", {simple_command}, CommandOptions::WithTimeout(4).Build())); |
| progress_message = GetProgressMessage(ds.listener_name_, 35, 36); |
| EXPECT_THAT(out, IsEmpty()); |
| EXPECT_THAT(err, StrEq(progress_message)); |
| |
| ds.listener_.clear(); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandDropRoot) { |
| // First check root case - only available when running with 'adb root'. |
| uid_t uid = getuid(); |
| if (uid == 0) { |
| EXPECT_EQ(0, RunCommand("", {simple_command, "--uid"})); |
| EXPECT_THAT(out, StrEq("0\nstdout\n")); |
| EXPECT_THAT(err, StrEq("stderr\n")); |
| return; |
| } |
| // Then drop root. |
| |
| EXPECT_EQ(0, RunCommand("", {simple_command, "--uid"}, |
| CommandOptions::WithTimeout(1).DropRoot().Build())); |
| EXPECT_THAT(out, StrEq("2000\nstdout\n")); |
| EXPECT_THAT(err, StrEq("drop_root_user(): already running as Shell\nstderr\n")); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandAsRootUserBuild) { |
| if (!IsUserBuild()) { |
| // Emulates user build if necessarily. |
| SetBuildType("user"); |
| } |
| |
| DropRoot(); |
| |
| EXPECT_EQ(0, RunCommand("", {simple_command}, CommandOptions::WithTimeout(1).AsRoot().Build())); |
| |
| // We don't know the exact path of su, so we just check for the 'root ...' commands |
| EXPECT_THAT(out, StartsWith("Skipping")); |
| EXPECT_THAT(out, EndsWith("root " + simple_command + "' on user build.\n")); |
| EXPECT_THAT(err, IsEmpty()); |
| } |
| |
| TEST_F(DumpstateTest, RunCommandAsRootNonUserBuild) { |
| if (IsUserBuild()) { |
| ALOGI("Skipping RunCommandAsRootNonUserBuild on user builds\n"); |
| return; |
| } |
| |
| DropRoot(); |
| |
| EXPECT_EQ(0, RunCommand("", {simple_command, "--uid"}, |
| CommandOptions::WithTimeout(1).AsRoot().Build())); |
| |
| EXPECT_THAT(out, StrEq("0\nstdout\n")); |
| EXPECT_THAT(err, StrEq("stderr\n")); |
| } |
| |
| TEST_F(DumpstateTest, DumpFileNotFoundNoTitle) { |
| EXPECT_EQ(-1, DumpFile("", "/I/cant/believe/I/exist")); |
| EXPECT_THAT(out, |
| StrEq("*** Error dumping /I/cant/believe/I/exist: No such file or directory\n")); |
| EXPECT_THAT(err, IsEmpty()); |
| } |
| |
| TEST_F(DumpstateTest, DumpFileNotFoundWithTitle) { |
| EXPECT_EQ(-1, DumpFile("Y U NO EXIST?", "/I/cant/believe/I/exist")); |
| EXPECT_THAT(err, IsEmpty()); |
| // We don't know the exact duration, so we check the prefix and suffix |
| EXPECT_THAT(out, StartsWith("*** Error dumping /I/cant/believe/I/exist (Y U NO EXIST?): No " |
| "such file or directory\n")); |
| EXPECT_THAT(out, EndsWith("s was the duration of 'Y U NO EXIST?' ------\n")); |
| } |
| |
| TEST_F(DumpstateTest, DumpFileSingleLine) { |
| EXPECT_EQ(0, DumpFile("", test_data_path + "single-line.txt")); |
| EXPECT_THAT(err, IsEmpty()); |
| EXPECT_THAT(out, StrEq("I AM LINE1\n")); // dumpstate adds missing newline |
| } |
| |
| TEST_F(DumpstateTest, DumpFileSingleLineWithNewLine) { |
| EXPECT_EQ(0, DumpFile("", test_data_path + "single-line-with-newline.txt")); |
| EXPECT_THAT(err, IsEmpty()); |
| EXPECT_THAT(out, StrEq("I AM LINE1\n")); |
| } |
| |
| TEST_F(DumpstateTest, DumpFileMultipleLines) { |
| EXPECT_EQ(0, DumpFile("", test_data_path + "multiple-lines.txt")); |
| EXPECT_THAT(err, IsEmpty()); |
| EXPECT_THAT(out, StrEq("I AM LINE1\nI AM LINE2\nI AM LINE3\n")); |
| } |
| |
| TEST_F(DumpstateTest, DumpFileMultipleLinesWithNewLine) { |
| EXPECT_EQ(0, DumpFile("", test_data_path + "multiple-lines-with-newline.txt")); |
| EXPECT_THAT(err, IsEmpty()); |
| EXPECT_THAT(out, StrEq("I AM LINE1\nI AM LINE2\nI AM LINE3\n")); |
| } |
| |
| TEST_F(DumpstateTest, DumpFileOnDryRunNoTitle) { |
| SetDryRun(true); |
| EXPECT_EQ(0, DumpFile("", test_data_path + "single-line.txt")); |
| EXPECT_THAT(err, IsEmpty()); |
| EXPECT_THAT(out, IsEmpty()); |
| } |
| |
| TEST_F(DumpstateTest, DumpFileOnDryRun) { |
| SetDryRun(true); |
| EXPECT_EQ(0, DumpFile("Might as well dump. Dump!", test_data_path + "single-line.txt")); |
| EXPECT_THAT(err, IsEmpty()); |
| EXPECT_THAT(out, StartsWith("------ Might as well dump. Dump! (" + test_data_path + |
| "single-line.txt) ------\n\t(skipped on dry run)\n------")); |
| EXPECT_THAT(out, EndsWith("s was the duration of 'Might as well dump. Dump!' ------\n")); |
| EXPECT_THAT(err, IsEmpty()); |
| } |
| |
| TEST_F(DumpstateTest, DumpFileUpdateProgressNoListener) { |
| ds.update_progress_ = true; |
| ds.progress_ = 0; |
| ds.weight_total_ = 30; |
| |
| EXPECT_EQ(0, DumpFile("", test_data_path + "single-line.txt")); |
| |
| std::string progress_message = |
| GetProgressMessageAndAssertSystemProperties(5, 30); // TODO: unhardcode WEIGHT_FILE (5)? |
| |
| EXPECT_THAT(err, StrEq(progress_message)); |
| EXPECT_THAT(out, StrEq("I AM LINE1\n")); // dumpstate adds missing newline |
| } |
| |
| TEST_F(DumpstateTest, DumpFileUpdateProgress) { |
| sp<DumpstateListenerMock> listener(new DumpstateListenerMock()); |
| ds.listener_ = listener; |
| ds.listener_name_ = "FoxMulder"; |
| ds.update_progress_ = true; |
| ds.progress_ = 0; |
| ds.weight_total_ = 30; |
| |
| EXPECT_CALL(*listener, onProgressUpdated(5)); |
| EXPECT_EQ(0, DumpFile("", test_data_path + "single-line.txt")); |
| |
| std::string progress_message = |
| GetProgressMessage(ds.listener_name_, 5, 30); // TODO: unhardcode WEIGHT_FILE (5)? |
| EXPECT_THAT(err, StrEq(progress_message)); |
| EXPECT_THAT(out, StrEq("I AM LINE1\n")); // dumpstate adds missing newline |
| |
| ds.listener_.clear(); |
| } |
| |
| class DumpstateServiceTest : public Test { |
| public: |
| DumpstateService dss; |
| }; |
| |
| TEST_F(DumpstateServiceTest, SetListenerNoName) { |
| sp<DumpstateListenerMock> listener(new DumpstateListenerMock()); |
| bool result; |
| EXPECT_TRUE(dss.setListener("", listener, &result).isOk()); |
| EXPECT_FALSE(result); |
| } |
| |
| TEST_F(DumpstateServiceTest, SetListenerNoPointer) { |
| bool result; |
| EXPECT_TRUE(dss.setListener("whatever", nullptr, &result).isOk()); |
| EXPECT_FALSE(result); |
| } |
| |
| TEST_F(DumpstateServiceTest, SetListenerTwice) { |
| sp<DumpstateListenerMock> listener(new DumpstateListenerMock()); |
| bool result; |
| EXPECT_TRUE(dss.setListener("whatever", listener, &result).isOk()); |
| EXPECT_TRUE(result); |
| |
| EXPECT_THAT(Dumpstate::GetInstance().listener_name_, StrEq("whatever")); |
| |
| EXPECT_TRUE(dss.setListener("whatever", listener, &result).isOk()); |
| EXPECT_FALSE(result); |
| } |