diff --git a/libs/ui/Android.mk b/libs/ui/Android.mk
index 24cdc78..4243bbf 100644
--- a/libs/ui/Android.mk
+++ b/libs/ui/Android.mk
@@ -12,6 +12,7 @@
 	KeyLayoutMap.cpp \
 	KeyCharacterMap.cpp \
 	Input.cpp \
+	InputDevice.cpp \
 	InputDispatcher.cpp \
 	InputManager.cpp \
 	InputReader.cpp \
@@ -38,3 +39,13 @@
 endif
 
 include $(BUILD_SHARED_LIBRARY)
+
+
+# Include subdirectory makefiles
+# ============================================================
+
+# If we're building with ONE_SHOT_MAKEFILE (mm, mmm), then what the framework
+# team really wants is to build the stuff defined by this makefile.
+ifeq (,$(ONE_SHOT_MAKEFILE))
+include $(call first-makefiles-under,$(LOCAL_PATH))
+endif
diff --git a/libs/ui/EventHub.cpp b/libs/ui/EventHub.cpp
index 27895f2..768b04e 100644
--- a/libs/ui/EventHub.cpp
+++ b/libs/ui/EventHub.cpp
@@ -54,6 +54,9 @@
  */
 #define test_bit(bit, array)    (array[bit/8] & (1<<(bit%8)))
 
+/* this macro computes the number of bytes needed to represent a bit array of the specified size */
+#define sizeof_bit_array(bits)  ((bits + 7) / 8)
+
 #define ID_MASK  0x0000ffff
 #define SEQ_MASK 0x7fff0000
 #define SEQ_SHIFT 16
@@ -182,7 +185,7 @@
 }
 
 int32_t EventHub::getScanCodeStateLocked(device_t* device, int32_t scanCode) const {
-    uint8_t key_bitmask[(KEY_MAX + 7) / 8];
+    uint8_t key_bitmask[sizeof_bit_array(KEY_MAX + 1)];
     memset(key_bitmask, 0, sizeof(key_bitmask));
     if (ioctl(mFDs[id_to_index(device->id)].fd,
                EVIOCGKEY(sizeof(key_bitmask)), key_bitmask) >= 0) {
@@ -218,7 +221,7 @@
     Vector<int32_t> scanCodes;
     device->layoutMap->findScancodes(keyCode, &scanCodes);
 
-    uint8_t key_bitmask[(KEY_MAX + 7) / 8];
+    uint8_t key_bitmask[sizeof_bit_array(KEY_MAX + 1)];
     memset(key_bitmask, 0, sizeof(key_bitmask));
     if (ioctl(mFDs[id_to_index(device->id)].fd,
                EVIOCGKEY(sizeof(key_bitmask)), key_bitmask) >= 0) {
@@ -264,7 +267,7 @@
 }
 
 int32_t EventHub::getSwitchStateLocked(device_t* device, int32_t sw) const {
-    uint8_t sw_bitmask[(SW_MAX + 7) / 8];
+    uint8_t sw_bitmask[sizeof_bit_array(SW_MAX + 1)];
     memset(sw_bitmask, 0, sizeof(sw_bitmask));
     if (ioctl(mFDs[id_to_index(device->id)].fd,
                EVIOCGSW(sizeof(sw_bitmask)), sw_bitmask) >= 0) {
@@ -409,7 +412,7 @@
                             LOGV("iev.code=%d outKeycode=%d outFlags=0x%08x err=%d\n",
                                 iev.code, *outKeycode, *outFlags, err);
                             if (err != 0) {
-                                *outKeycode = 0;
+                                *outKeycode = AKEYCODE_UNKNOWN;
                                 *outFlags = 0;
                             }
                         } else {
@@ -509,6 +512,26 @@
 
 // ----------------------------------------------------------------------------
 
+static bool containsNonZeroByte(const uint8_t* array, uint32_t startIndex, uint32_t endIndex) {
+    const uint8_t* end = array + endIndex;
+    array += startIndex;
+    while (array != end) {
+        if (*(array++) != 0) {
+            return true;
+        }
+    }
+    return false;
+}
+
+static const int32_t GAMEPAD_KEYCODES[] = {
+        AKEYCODE_BUTTON_A, AKEYCODE_BUTTON_B, AKEYCODE_BUTTON_C,
+        AKEYCODE_BUTTON_X, AKEYCODE_BUTTON_Y, AKEYCODE_BUTTON_Z,
+        AKEYCODE_BUTTON_L1, AKEYCODE_BUTTON_R1,
+        AKEYCODE_BUTTON_L2, AKEYCODE_BUTTON_R2,
+        AKEYCODE_BUTTON_THUMBL, AKEYCODE_BUTTON_THUMBR,
+        AKEYCODE_BUTTON_START, AKEYCODE_BUTTON_SELECT, AKEYCODE_BUTTON_MODE
+};
+
 int EventHub::open_device(const char *deviceName)
 {
     int version;
@@ -626,27 +649,27 @@
     mFDs[mFDCount].fd = fd;
     mFDs[mFDCount].events = POLLIN;
 
-    // figure out the kinds of events the device reports
+    // Figure out the kinds of events the device reports.
     
-    // See if this is a keyboard, and classify it.  Note that we only
-    // consider up through the function keys; we don't want to include
-    // ones after that (play cd etc) so we don't mistakenly consider a
-    // controller to be a keyboard.
-    uint8_t key_bitmask[(KEY_MAX+7)/8];
+    uint8_t key_bitmask[sizeof_bit_array(KEY_MAX + 1)];
     memset(key_bitmask, 0, sizeof(key_bitmask));
+
     LOGV("Getting keys...");
     if (ioctl(fd, EVIOCGBIT(EV_KEY, sizeof(key_bitmask)), key_bitmask) >= 0) {
         //LOGI("MAP\n");
-        //for (int i=0; i<((KEY_MAX+7)/8); i++) {
+        //for (int i = 0; i < sizeof(key_bitmask); i++) {
         //    LOGI("%d: 0x%02x\n", i, key_bitmask[i]);
         //}
-        for (int i=0; i<((BTN_MISC+7)/8); i++) {
-            if (key_bitmask[i] != 0) {
-                device->classes |= INPUT_DEVICE_CLASS_KEYBOARD;
-                break;
-            }
-        }
-        if ((device->classes & INPUT_DEVICE_CLASS_KEYBOARD) != 0) {
+
+        // See if this is a keyboard.  Ignore everything in the button range except for
+        // gamepads which are also considered keyboards.
+        if (containsNonZeroByte(key_bitmask, 0, sizeof_bit_array(BTN_MISC))
+                || containsNonZeroByte(key_bitmask, sizeof_bit_array(BTN_GAMEPAD),
+                        sizeof_bit_array(BTN_DIGI))
+                || containsNonZeroByte(key_bitmask, sizeof_bit_array(KEY_OK),
+                        sizeof_bit_array(KEY_MAX + 1))) {
+            device->classes |= INPUT_DEVICE_CLASS_KEYBOARD;
+
             device->keyBitmask = new uint8_t[sizeof(key_bitmask)];
             if (device->keyBitmask != NULL) {
                 memcpy(device->keyBitmask, key_bitmask, sizeof(key_bitmask));
@@ -658,39 +681,39 @@
         }
     }
     
-    // See if this is a trackball.
+    // See if this is a trackball (or mouse).
     if (test_bit(BTN_MOUSE, key_bitmask)) {
-        uint8_t rel_bitmask[(REL_MAX+7)/8];
+        uint8_t rel_bitmask[sizeof_bit_array(REL_MAX + 1)];
         memset(rel_bitmask, 0, sizeof(rel_bitmask));
         LOGV("Getting relative controllers...");
-        if (ioctl(fd, EVIOCGBIT(EV_REL, sizeof(rel_bitmask)), rel_bitmask) >= 0)
-        {
+        if (ioctl(fd, EVIOCGBIT(EV_REL, sizeof(rel_bitmask)), rel_bitmask) >= 0) {
             if (test_bit(REL_X, rel_bitmask) && test_bit(REL_Y, rel_bitmask)) {
                 device->classes |= INPUT_DEVICE_CLASS_TRACKBALL;
             }
         }
     }
-    
-    uint8_t abs_bitmask[(ABS_MAX+7)/8];
+
+    // See if this is a touch pad.
+    uint8_t abs_bitmask[sizeof_bit_array(ABS_MAX + 1)];
     memset(abs_bitmask, 0, sizeof(abs_bitmask));
     LOGV("Getting absolute controllers...");
-    ioctl(fd, EVIOCGBIT(EV_ABS, sizeof(abs_bitmask)), abs_bitmask);
-    
-    // Is this a new modern multi-touch driver?
-    if (test_bit(ABS_MT_TOUCH_MAJOR, abs_bitmask)
-            && test_bit(ABS_MT_POSITION_X, abs_bitmask)
-            && test_bit(ABS_MT_POSITION_Y, abs_bitmask)) {
-        device->classes |= INPUT_DEVICE_CLASS_TOUCHSCREEN | INPUT_DEVICE_CLASS_TOUCHSCREEN_MT;
-        
-    // Is this an old style single-touch driver?
-    } else if (test_bit(BTN_TOUCH, key_bitmask)
-            && test_bit(ABS_X, abs_bitmask) && test_bit(ABS_Y, abs_bitmask)) {
-        device->classes |= INPUT_DEVICE_CLASS_TOUCHSCREEN;
+    if (ioctl(fd, EVIOCGBIT(EV_ABS, sizeof(abs_bitmask)), abs_bitmask) >= 0) {
+        // Is this a new modern multi-touch driver?
+        if (test_bit(ABS_MT_TOUCH_MAJOR, abs_bitmask)
+                && test_bit(ABS_MT_POSITION_X, abs_bitmask)
+                && test_bit(ABS_MT_POSITION_Y, abs_bitmask)) {
+            device->classes |= INPUT_DEVICE_CLASS_TOUCHSCREEN | INPUT_DEVICE_CLASS_TOUCHSCREEN_MT;
+
+        // Is this an old style single-touch driver?
+        } else if (test_bit(BTN_TOUCH, key_bitmask)
+                && test_bit(ABS_X, abs_bitmask) && test_bit(ABS_Y, abs_bitmask)) {
+            device->classes |= INPUT_DEVICE_CLASS_TOUCHSCREEN;
+        }
     }
 
 #ifdef EV_SW
     // figure out the switches this device reports
-    uint8_t sw_bitmask[(SW_MAX+7)/8];
+    uint8_t sw_bitmask[sizeof_bit_array(SW_MAX + 1)];
     memset(sw_bitmask, 0, sizeof(sw_bitmask));
     if (ioctl(fd, EVIOCGBIT(EV_SW, sizeof(sw_bitmask)), sw_bitmask) >= 0) {
         for (int i=0; i<EV_SW; i++) {
@@ -726,7 +749,10 @@
                      "%s/usr/keylayout/%s", root, "qwerty.kl");
             defaultKeymap = true;
         }
-        device->layoutMap->load(keylayoutFilename);
+        status_t status = device->layoutMap->load(keylayoutFilename);
+        if (status) {
+            LOGE("Error %d loading key layout.", status);
+        }
 
         // tell the world about the devname (the descriptive name)
         if (!mHaveFirstKeyboard && !defaultKeymap && strstr(name, "-keypad")) {
@@ -746,19 +772,27 @@
         property_set(propName, name);
 
         // 'Q' key support = cheap test of whether this is an alpha-capable kbd
-        if (hasKeycode(device, kKeyCodeQ)) {
+        if (hasKeycode(device, AKEYCODE_Q)) {
             device->classes |= INPUT_DEVICE_CLASS_ALPHAKEY;
         }
         
-        // See if this has a DPAD.
-        if (hasKeycode(device, kKeyCodeDpadUp) &&
-                hasKeycode(device, kKeyCodeDpadDown) &&
-                hasKeycode(device, kKeyCodeDpadLeft) &&
-                hasKeycode(device, kKeyCodeDpadRight) &&
-                hasKeycode(device, kKeyCodeDpadCenter)) {
+        // See if this device has a DPAD.
+        if (hasKeycode(device, AKEYCODE_DPAD_UP) &&
+                hasKeycode(device, AKEYCODE_DPAD_DOWN) &&
+                hasKeycode(device, AKEYCODE_DPAD_LEFT) &&
+                hasKeycode(device, AKEYCODE_DPAD_RIGHT) &&
+                hasKeycode(device, AKEYCODE_DPAD_CENTER)) {
             device->classes |= INPUT_DEVICE_CLASS_DPAD;
         }
         
+        // See if this device has a gamepad.
+        for (size_t i = 0; i < sizeof(GAMEPAD_KEYCODES); i++) {
+            if (hasKeycode(device, GAMEPAD_KEYCODES[i])) {
+                device->classes |= INPUT_DEVICE_CLASS_GAMEPAD;
+                break;
+            }
+        }
+
         LOGI("New keyboard: device->id=0x%x devname='%s' propName='%s' keylayout='%s'\n",
                 device->id, name, propName, keylayoutFilename);
     }
diff --git a/libs/ui/Input.cpp b/libs/ui/Input.cpp
index a64251f..1f19c2c 100644
--- a/libs/ui/Input.cpp
+++ b/libs/ui/Input.cpp
@@ -22,26 +22,26 @@
 
 bool KeyEvent::hasDefaultAction(int32_t keyCode) {
     switch (keyCode) {
-        case KEYCODE_HOME:
-        case KEYCODE_BACK:
-        case KEYCODE_CALL:
-        case KEYCODE_ENDCALL:
-        case KEYCODE_VOLUME_UP:
-        case KEYCODE_VOLUME_DOWN:
-        case KEYCODE_POWER:
-        case KEYCODE_CAMERA:
-        case KEYCODE_HEADSETHOOK:
-        case KEYCODE_MENU:
-        case KEYCODE_NOTIFICATION:
-        case KEYCODE_FOCUS:
-        case KEYCODE_SEARCH:
-        case KEYCODE_MEDIA_PLAY_PAUSE:
-        case KEYCODE_MEDIA_STOP:
-        case KEYCODE_MEDIA_NEXT:
-        case KEYCODE_MEDIA_PREVIOUS:
-        case KEYCODE_MEDIA_REWIND:
-        case KEYCODE_MEDIA_FAST_FORWARD:
-        case KEYCODE_MUTE:
+        case AKEYCODE_HOME:
+        case AKEYCODE_BACK:
+        case AKEYCODE_CALL:
+        case AKEYCODE_ENDCALL:
+        case AKEYCODE_VOLUME_UP:
+        case AKEYCODE_VOLUME_DOWN:
+        case AKEYCODE_POWER:
+        case AKEYCODE_CAMERA:
+        case AKEYCODE_HEADSETHOOK:
+        case AKEYCODE_MENU:
+        case AKEYCODE_NOTIFICATION:
+        case AKEYCODE_FOCUS:
+        case AKEYCODE_SEARCH:
+        case AKEYCODE_MEDIA_PLAY_PAUSE:
+        case AKEYCODE_MEDIA_STOP:
+        case AKEYCODE_MEDIA_NEXT:
+        case AKEYCODE_MEDIA_PREVIOUS:
+        case AKEYCODE_MEDIA_REWIND:
+        case AKEYCODE_MEDIA_FAST_FORWARD:
+        case AKEYCODE_MUTE:
             return true;
     }
     
@@ -54,26 +54,26 @@
 
 bool KeyEvent::isSystemKey(int32_t keyCode) {
     switch (keyCode) {
-        case KEYCODE_MENU:
-        case KEYCODE_SOFT_RIGHT:
-        case KEYCODE_HOME:
-        case KEYCODE_BACK:
-        case KEYCODE_CALL:
-        case KEYCODE_ENDCALL:
-        case KEYCODE_VOLUME_UP:
-        case KEYCODE_VOLUME_DOWN:
-        case KEYCODE_MUTE:
-        case KEYCODE_POWER:
-        case KEYCODE_HEADSETHOOK:
-        case KEYCODE_MEDIA_PLAY_PAUSE:
-        case KEYCODE_MEDIA_STOP:
-        case KEYCODE_MEDIA_NEXT:
-        case KEYCODE_MEDIA_PREVIOUS:
-        case KEYCODE_MEDIA_REWIND:
-        case KEYCODE_MEDIA_FAST_FORWARD:
-        case KEYCODE_CAMERA:
-        case KEYCODE_FOCUS:
-        case KEYCODE_SEARCH:
+        case AKEYCODE_MENU:
+        case AKEYCODE_SOFT_RIGHT:
+        case AKEYCODE_HOME:
+        case AKEYCODE_BACK:
+        case AKEYCODE_CALL:
+        case AKEYCODE_ENDCALL:
+        case AKEYCODE_VOLUME_UP:
+        case AKEYCODE_VOLUME_DOWN:
+        case AKEYCODE_MUTE:
+        case AKEYCODE_POWER:
+        case AKEYCODE_HEADSETHOOK:
+        case AKEYCODE_MEDIA_PLAY_PAUSE:
+        case AKEYCODE_MEDIA_STOP:
+        case AKEYCODE_MEDIA_NEXT:
+        case AKEYCODE_MEDIA_PREVIOUS:
+        case AKEYCODE_MEDIA_REWIND:
+        case AKEYCODE_MEDIA_FAST_FORWARD:
+        case AKEYCODE_CAMERA:
+        case AKEYCODE_FOCUS:
+        case AKEYCODE_SEARCH:
             return true;
     }
     
diff --git a/libs/ui/InputDevice.cpp b/libs/ui/InputDevice.cpp
new file mode 100644
index 0000000..6014017
--- /dev/null
+++ b/libs/ui/InputDevice.cpp
@@ -0,0 +1,729 @@
+//
+// Copyright 2010 The Android Open Source Project
+//
+// The input reader.
+//
+#define LOG_TAG "InputDevice"
+
+//#define LOG_NDEBUG 0
+
+// Log debug messages for each raw event received from the EventHub.
+#define DEBUG_RAW_EVENTS 0
+
+// Log debug messages about touch screen filtering hacks.
+#define DEBUG_HACKS 0
+
+// Log debug messages about virtual key processing.
+#define DEBUG_VIRTUAL_KEYS 0
+
+// Log debug messages about pointers.
+#define DEBUG_POINTERS 0
+
+// Log debug messages about pointer assignment calculations.
+#define DEBUG_POINTER_ASSIGNMENT 0
+
+#include <cutils/log.h>
+#include <ui/InputDevice.h>
+
+#include <stddef.h>
+#include <unistd.h>
+#include <errno.h>
+#include <limits.h>
+
+/* Slop distance for jumpy pointer detection.
+ * The vertical range of the screen divided by this is our epsilon value. */
+#define JUMPY_EPSILON_DIVISOR 212
+
+/* Number of jumpy points to drop for touchscreens that need it. */
+#define JUMPY_TRANSITION_DROPS 3
+#define JUMPY_DROP_LIMIT 3
+
+/* Maximum squared distance for averaging.
+ * If moving farther than this, turn of averaging to avoid lag in response. */
+#define AVERAGING_DISTANCE_LIMIT (75 * 75)
+
+
+namespace android {
+
+// --- Static Functions ---
+
+template<typename T>
+inline static T abs(const T& value) {
+    return value < 0 ? - value : value;
+}
+
+template<typename T>
+inline static T min(const T& a, const T& b) {
+    return a < b ? a : b;
+}
+
+template<typename T>
+inline static void swap(T& a, T& b) {
+    T temp = a;
+    a = b;
+    b = temp;
+}
+
+
+// --- InputDevice ---
+
+InputDevice::InputDevice(int32_t id, uint32_t classes, String8 name) :
+    id(id), classes(classes), name(name), ignored(false) {
+}
+
+void InputDevice::reset() {
+    if (isKeyboard()) {
+        keyboard.reset();
+    }
+
+    if (isTrackball()) {
+        trackball.reset();
+    }
+
+    if (isMultiTouchScreen()) {
+        multiTouchScreen.reset();
+    } else if (isSingleTouchScreen()) {
+        singleTouchScreen.reset();
+    }
+
+    if (isTouchScreen()) {
+        touchScreen.reset();
+    }
+}
+
+
+// --- InputDevice::TouchData ---
+
+void InputDevice::TouchData::copyFrom(const TouchData& other) {
+    pointerCount = other.pointerCount;
+    idBits = other.idBits;
+
+    for (uint32_t i = 0; i < pointerCount; i++) {
+        pointers[i] = other.pointers[i];
+        idToIndex[i] = other.idToIndex[i];
+    }
+}
+
+
+// --- InputDevice::KeyboardState ---
+
+void InputDevice::KeyboardState::reset() {
+    current.metaState = META_NONE;
+    current.downTime = 0;
+}
+
+
+// --- InputDevice::TrackballState ---
+
+void InputDevice::TrackballState::reset() {
+    accumulator.clear();
+    current.down = false;
+    current.downTime = 0;
+}
+
+
+// --- InputDevice::TouchScreenState ---
+
+void InputDevice::TouchScreenState::reset() {
+    lastTouch.clear();
+    downTime = 0;
+    currentVirtualKey.status = CurrentVirtualKeyState::STATUS_UP;
+
+    for (uint32_t i = 0; i < MAX_POINTERS; i++) {
+        averagingTouchFilter.historyStart[i] = 0;
+        averagingTouchFilter.historyEnd[i] = 0;
+    }
+
+    jumpyTouchFilter.jumpyPointsDropped = 0;
+}
+
+struct PointerDistanceHeapElement {
+    uint32_t currentPointerIndex : 8;
+    uint32_t lastPointerIndex : 8;
+    uint64_t distance : 48; // squared distance
+};
+
+void InputDevice::TouchScreenState::calculatePointerIds() {
+    uint32_t currentPointerCount = currentTouch.pointerCount;
+    uint32_t lastPointerCount = lastTouch.pointerCount;
+
+    if (currentPointerCount == 0) {
+        // No pointers to assign.
+        currentTouch.idBits.clear();
+    } else if (lastPointerCount == 0) {
+        // All pointers are new.
+        currentTouch.idBits.clear();
+        for (uint32_t i = 0; i < currentPointerCount; i++) {
+            currentTouch.pointers[i].id = i;
+            currentTouch.idToIndex[i] = i;
+            currentTouch.idBits.markBit(i);
+        }
+    } else if (currentPointerCount == 1 && lastPointerCount == 1) {
+        // Only one pointer and no change in count so it must have the same id as before.
+        uint32_t id = lastTouch.pointers[0].id;
+        currentTouch.pointers[0].id = id;
+        currentTouch.idToIndex[id] = 0;
+        currentTouch.idBits.value = BitSet32::valueForBit(id);
+    } else {
+        // General case.
+        // We build a heap of squared euclidean distances between current and last pointers
+        // associated with the current and last pointer indices.  Then, we find the best
+        // match (by distance) for each current pointer.
+        PointerDistanceHeapElement heap[MAX_POINTERS * MAX_POINTERS];
+
+        uint32_t heapSize = 0;
+        for (uint32_t currentPointerIndex = 0; currentPointerIndex < currentPointerCount;
+                currentPointerIndex++) {
+            for (uint32_t lastPointerIndex = 0; lastPointerIndex < lastPointerCount;
+                    lastPointerIndex++) {
+                int64_t deltaX = currentTouch.pointers[currentPointerIndex].x
+                        - lastTouch.pointers[lastPointerIndex].x;
+                int64_t deltaY = currentTouch.pointers[currentPointerIndex].y
+                        - lastTouch.pointers[lastPointerIndex].y;
+
+                uint64_t distance = uint64_t(deltaX * deltaX + deltaY * deltaY);
+
+                // Insert new element into the heap (sift up).
+                heap[heapSize].currentPointerIndex = currentPointerIndex;
+                heap[heapSize].lastPointerIndex = lastPointerIndex;
+                heap[heapSize].distance = distance;
+                heapSize += 1;
+            }
+        }
+
+        // Heapify
+        for (uint32_t startIndex = heapSize / 2; startIndex != 0; ) {
+            startIndex -= 1;
+            for (uint32_t parentIndex = startIndex; ;) {
+                uint32_t childIndex = parentIndex * 2 + 1;
+                if (childIndex >= heapSize) {
+                    break;
+                }
+
+                if (childIndex + 1 < heapSize
+                        && heap[childIndex + 1].distance < heap[childIndex].distance) {
+                    childIndex += 1;
+                }
+
+                if (heap[parentIndex].distance <= heap[childIndex].distance) {
+                    break;
+                }
+
+                swap(heap[parentIndex], heap[childIndex]);
+                parentIndex = childIndex;
+            }
+        }
+
+#if DEBUG_POINTER_ASSIGNMENT
+        LOGD("calculatePointerIds - initial distance min-heap: size=%d", heapSize);
+        for (size_t i = 0; i < heapSize; i++) {
+            LOGD("  heap[%d]: cur=%d, last=%d, distance=%lld",
+                    i, heap[i].currentPointerIndex, heap[i].lastPointerIndex,
+                    heap[i].distance);
+        }
+#endif
+
+        // Pull matches out by increasing order of distance.
+        // To avoid reassigning pointers that have already been matched, the loop keeps track
+        // of which last and current pointers have been matched using the matchedXXXBits variables.
+        // It also tracks the used pointer id bits.
+        BitSet32 matchedLastBits(0);
+        BitSet32 matchedCurrentBits(0);
+        BitSet32 usedIdBits(0);
+        bool first = true;
+        for (uint32_t i = min(currentPointerCount, lastPointerCount); i > 0; i--) {
+            for (;;) {
+                if (first) {
+                    // The first time through the loop, we just consume the root element of
+                    // the heap (the one with smallest distance).
+                    first = false;
+                } else {
+                    // Previous iterations consumed the root element of the heap.
+                    // Pop root element off of the heap (sift down).
+                    heapSize -= 1;
+                    assert(heapSize > 0);
+
+                    // Sift down.
+                    heap[0] = heap[heapSize];
+                    for (uint32_t parentIndex = 0; ;) {
+                        uint32_t childIndex = parentIndex * 2 + 1;
+                        if (childIndex >= heapSize) {
+                            break;
+                        }
+
+                        if (childIndex + 1 < heapSize
+                                && heap[childIndex + 1].distance < heap[childIndex].distance) {
+                            childIndex += 1;
+                        }
+
+                        if (heap[parentIndex].distance <= heap[childIndex].distance) {
+                            break;
+                        }
+
+                        swap(heap[parentIndex], heap[childIndex]);
+                        parentIndex = childIndex;
+                    }
+
+#if DEBUG_POINTER_ASSIGNMENT
+                    LOGD("calculatePointerIds - reduced distance min-heap: size=%d", heapSize);
+                    for (size_t i = 0; i < heapSize; i++) {
+                        LOGD("  heap[%d]: cur=%d, last=%d, distance=%lld",
+                                i, heap[i].currentPointerIndex, heap[i].lastPointerIndex,
+                                heap[i].distance);
+                    }
+#endif
+                }
+
+                uint32_t currentPointerIndex = heap[0].currentPointerIndex;
+                if (matchedCurrentBits.hasBit(currentPointerIndex)) continue; // already matched
+
+                uint32_t lastPointerIndex = heap[0].lastPointerIndex;
+                if (matchedLastBits.hasBit(lastPointerIndex)) continue; // already matched
+
+                matchedCurrentBits.markBit(currentPointerIndex);
+                matchedLastBits.markBit(lastPointerIndex);
+
+                uint32_t id = lastTouch.pointers[lastPointerIndex].id;
+                currentTouch.pointers[currentPointerIndex].id = id;
+                currentTouch.idToIndex[id] = currentPointerIndex;
+                usedIdBits.markBit(id);
+
+#if DEBUG_POINTER_ASSIGNMENT
+                LOGD("calculatePointerIds - matched: cur=%d, last=%d, id=%d, distance=%lld",
+                        lastPointerIndex, currentPointerIndex, id, heap[0].distance);
+#endif
+                break;
+            }
+        }
+
+        // Assign fresh ids to new pointers.
+        if (currentPointerCount > lastPointerCount) {
+            for (uint32_t i = currentPointerCount - lastPointerCount; ;) {
+                uint32_t currentPointerIndex = matchedCurrentBits.firstUnmarkedBit();
+                uint32_t id = usedIdBits.firstUnmarkedBit();
+
+                currentTouch.pointers[currentPointerIndex].id = id;
+                currentTouch.idToIndex[id] = currentPointerIndex;
+                usedIdBits.markBit(id);
+
+#if DEBUG_POINTER_ASSIGNMENT
+                LOGD("calculatePointerIds - assigned: cur=%d, id=%d",
+                        currentPointerIndex, id);
+#endif
+
+                if (--i == 0) break; // done
+                matchedCurrentBits.markBit(currentPointerIndex);
+            }
+        }
+
+        // Fix id bits.
+        currentTouch.idBits = usedIdBits;
+    }
+}
+
+/* Special hack for devices that have bad screen data: if one of the
+ * points has moved more than a screen height from the last position,
+ * then drop it. */
+bool InputDevice::TouchScreenState::applyBadTouchFilter() {
+    // This hack requires valid axis parameters.
+    if (! parameters.yAxis.valid) {
+        return false;
+    }
+
+    uint32_t pointerCount = currentTouch.pointerCount;
+
+    // Nothing to do if there are no points.
+    if (pointerCount == 0) {
+        return false;
+    }
+
+    // Don't do anything if a finger is going down or up.  We run
+    // here before assigning pointer IDs, so there isn't a good
+    // way to do per-finger matching.
+    if (pointerCount != lastTouch.pointerCount) {
+        return false;
+    }
+
+    // We consider a single movement across more than a 7/16 of
+    // the long size of the screen to be bad.  This was a magic value
+    // determined by looking at the maximum distance it is feasible
+    // to actually move in one sample.
+    int32_t maxDeltaY = parameters.yAxis.range * 7 / 16;
+
+    // XXX The original code in InputDevice.java included commented out
+    //     code for testing the X axis.  Note that when we drop a point
+    //     we don't actually restore the old X either.  Strange.
+    //     The old code also tries to track when bad points were previously
+    //     detected but it turns out that due to the placement of a "break"
+    //     at the end of the loop, we never set mDroppedBadPoint to true
+    //     so it is effectively dead code.
+    // Need to figure out if the old code is busted or just overcomplicated
+    // but working as intended.
+
+    // Look through all new points and see if any are farther than
+    // acceptable from all previous points.
+    for (uint32_t i = pointerCount; i-- > 0; ) {
+        int32_t y = currentTouch.pointers[i].y;
+        int32_t closestY = INT_MAX;
+        int32_t closestDeltaY = 0;
+
+#if DEBUG_HACKS
+        LOGD("BadTouchFilter: Looking at next point #%d: y=%d", i, y);
+#endif
+
+        for (uint32_t j = pointerCount; j-- > 0; ) {
+            int32_t lastY = lastTouch.pointers[j].y;
+            int32_t deltaY = abs(y - lastY);
+
+#if DEBUG_HACKS
+            LOGD("BadTouchFilter: Comparing with last point #%d: y=%d deltaY=%d",
+                    j, lastY, deltaY);
+#endif
+
+            if (deltaY < maxDeltaY) {
+                goto SkipSufficientlyClosePoint;
+            }
+            if (deltaY < closestDeltaY) {
+                closestDeltaY = deltaY;
+                closestY = lastY;
+            }
+        }
+
+        // Must not have found a close enough match.
+#if DEBUG_HACKS
+        LOGD("BadTouchFilter: Dropping bad point #%d: newY=%d oldY=%d deltaY=%d maxDeltaY=%d",
+                i, y, closestY, closestDeltaY, maxDeltaY);
+#endif
+
+        currentTouch.pointers[i].y = closestY;
+        return true; // XXX original code only corrects one point
+
+    SkipSufficientlyClosePoint: ;
+    }
+
+    // No change.
+    return false;
+}
+
+/* Special hack for devices that have bad screen data: drop points where
+ * the coordinate value for one axis has jumped to the other pointer's location.
+ */
+bool InputDevice::TouchScreenState::applyJumpyTouchFilter() {
+    // This hack requires valid axis parameters.
+    if (! parameters.yAxis.valid) {
+        return false;
+    }
+
+    uint32_t pointerCount = currentTouch.pointerCount;
+    if (lastTouch.pointerCount != pointerCount) {
+#if DEBUG_HACKS
+        LOGD("JumpyTouchFilter: Different pointer count %d -> %d",
+                lastTouch.pointerCount, pointerCount);
+        for (uint32_t i = 0; i < pointerCount; i++) {
+            LOGD("  Pointer %d (%d, %d)", i,
+                    currentTouch.pointers[i].x, currentTouch.pointers[i].y);
+        }
+#endif
+
+        if (jumpyTouchFilter.jumpyPointsDropped < JUMPY_TRANSITION_DROPS) {
+            if (lastTouch.pointerCount == 1 && pointerCount == 2) {
+                // Just drop the first few events going from 1 to 2 pointers.
+                // They're bad often enough that they're not worth considering.
+                currentTouch.pointerCount = 1;
+                jumpyTouchFilter.jumpyPointsDropped += 1;
+
+#if DEBUG_HACKS
+                LOGD("JumpyTouchFilter: Pointer 2 dropped");
+#endif
+                return true;
+            } else if (lastTouch.pointerCount == 2 && pointerCount == 1) {
+                // The event when we go from 2 -> 1 tends to be messed up too
+                currentTouch.pointerCount = 2;
+                currentTouch.pointers[0] = lastTouch.pointers[0];
+                currentTouch.pointers[1] = lastTouch.pointers[1];
+                jumpyTouchFilter.jumpyPointsDropped += 1;
+
+#if DEBUG_HACKS
+                for (int32_t i = 0; i < 2; i++) {
+                    LOGD("JumpyTouchFilter: Pointer %d replaced (%d, %d)", i,
+                            currentTouch.pointers[i].x, currentTouch.pointers[i].y);
+                }
+#endif
+                return true;
+            }
+        }
+        // Reset jumpy points dropped on other transitions or if limit exceeded.
+        jumpyTouchFilter.jumpyPointsDropped = 0;
+
+#if DEBUG_HACKS
+        LOGD("JumpyTouchFilter: Transition - drop limit reset");
+#endif
+        return false;
+    }
+
+    // We have the same number of pointers as last time.
+    // A 'jumpy' point is one where the coordinate value for one axis
+    // has jumped to the other pointer's location. No need to do anything
+    // else if we only have one pointer.
+    if (pointerCount < 2) {
+        return false;
+    }
+
+    if (jumpyTouchFilter.jumpyPointsDropped < JUMPY_DROP_LIMIT) {
+        int jumpyEpsilon = parameters.yAxis.range / JUMPY_EPSILON_DIVISOR;
+
+        // We only replace the single worst jumpy point as characterized by pointer distance
+        // in a single axis.
+        int32_t badPointerIndex = -1;
+        int32_t badPointerReplacementIndex = -1;
+        int32_t badPointerDistance = INT_MIN; // distance to be corrected
+
+        for (uint32_t i = pointerCount; i-- > 0; ) {
+            int32_t x = currentTouch.pointers[i].x;
+            int32_t y = currentTouch.pointers[i].y;
+
+#if DEBUG_HACKS
+            LOGD("JumpyTouchFilter: Point %d (%d, %d)", i, x, y);
+#endif
+
+            // Check if a touch point is too close to another's coordinates
+            bool dropX = false, dropY = false;
+            for (uint32_t j = 0; j < pointerCount; j++) {
+                if (i == j) {
+                    continue;
+                }
+
+                if (abs(x - currentTouch.pointers[j].x) <= jumpyEpsilon) {
+                    dropX = true;
+                    break;
+                }
+
+                if (abs(y - currentTouch.pointers[j].y) <= jumpyEpsilon) {
+                    dropY = true;
+                    break;
+                }
+            }
+            if (! dropX && ! dropY) {
+                continue; // not jumpy
+            }
+
+            // Find a replacement candidate by comparing with older points on the
+            // complementary (non-jumpy) axis.
+            int32_t distance = INT_MIN; // distance to be corrected
+            int32_t replacementIndex = -1;
+
+            if (dropX) {
+                // X looks too close.  Find an older replacement point with a close Y.
+                int32_t smallestDeltaY = INT_MAX;
+                for (uint32_t j = 0; j < pointerCount; j++) {
+                    int32_t deltaY = abs(y - lastTouch.pointers[j].y);
+                    if (deltaY < smallestDeltaY) {
+                        smallestDeltaY = deltaY;
+                        replacementIndex = j;
+                    }
+                }
+                distance = abs(x - lastTouch.pointers[replacementIndex].x);
+            } else {
+                // Y looks too close.  Find an older replacement point with a close X.
+                int32_t smallestDeltaX = INT_MAX;
+                for (uint32_t j = 0; j < pointerCount; j++) {
+                    int32_t deltaX = abs(x - lastTouch.pointers[j].x);
+                    if (deltaX < smallestDeltaX) {
+                        smallestDeltaX = deltaX;
+                        replacementIndex = j;
+                    }
+                }
+                distance = abs(y - lastTouch.pointers[replacementIndex].y);
+            }
+
+            // If replacing this pointer would correct a worse error than the previous ones
+            // considered, then use this replacement instead.
+            if (distance > badPointerDistance) {
+                badPointerIndex = i;
+                badPointerReplacementIndex = replacementIndex;
+                badPointerDistance = distance;
+            }
+        }
+
+        // Correct the jumpy pointer if one was found.
+        if (badPointerIndex >= 0) {
+#if DEBUG_HACKS
+            LOGD("JumpyTouchFilter: Replacing bad pointer %d with (%d, %d)",
+                    badPointerIndex,
+                    lastTouch.pointers[badPointerReplacementIndex].x,
+                    lastTouch.pointers[badPointerReplacementIndex].y);
+#endif
+
+            currentTouch.pointers[badPointerIndex].x =
+                    lastTouch.pointers[badPointerReplacementIndex].x;
+            currentTouch.pointers[badPointerIndex].y =
+                    lastTouch.pointers[badPointerReplacementIndex].y;
+            jumpyTouchFilter.jumpyPointsDropped += 1;
+            return true;
+        }
+    }
+
+    jumpyTouchFilter.jumpyPointsDropped = 0;
+    return false;
+}
+
+/* Special hack for devices that have bad screen data: aggregate and
+ * compute averages of the coordinate data, to reduce the amount of
+ * jitter seen by applications. */
+void InputDevice::TouchScreenState::applyAveragingTouchFilter() {
+    for (uint32_t currentIndex = 0; currentIndex < currentTouch.pointerCount; currentIndex++) {
+        uint32_t id = currentTouch.pointers[currentIndex].id;
+        int32_t x = currentTouch.pointers[currentIndex].x;
+        int32_t y = currentTouch.pointers[currentIndex].y;
+        int32_t pressure = currentTouch.pointers[currentIndex].pressure;
+
+        if (lastTouch.idBits.hasBit(id)) {
+            // Pointer was down before and is still down now.
+            // Compute average over history trace.
+            uint32_t start = averagingTouchFilter.historyStart[id];
+            uint32_t end = averagingTouchFilter.historyEnd[id];
+
+            int64_t deltaX = x - averagingTouchFilter.historyData[end].pointers[id].x;
+            int64_t deltaY = y - averagingTouchFilter.historyData[end].pointers[id].y;
+            uint64_t distance = uint64_t(deltaX * deltaX + deltaY * deltaY);
+
+#if DEBUG_HACKS
+            LOGD("AveragingTouchFilter: Pointer id %d - Distance from last sample: %lld",
+                    id, distance);
+#endif
+
+            if (distance < AVERAGING_DISTANCE_LIMIT) {
+                // Increment end index in preparation for recording new historical data.
+                end += 1;
+                if (end > AVERAGING_HISTORY_SIZE) {
+                    end = 0;
+                }
+
+                // If the end index has looped back to the start index then we have filled
+                // the historical trace up to the desired size so we drop the historical
+                // data at the start of the trace.
+                if (end == start) {
+                    start += 1;
+                    if (start > AVERAGING_HISTORY_SIZE) {
+                        start = 0;
+                    }
+                }
+
+                // Add the raw data to the historical trace.
+                averagingTouchFilter.historyStart[id] = start;
+                averagingTouchFilter.historyEnd[id] = end;
+                averagingTouchFilter.historyData[end].pointers[id].x = x;
+                averagingTouchFilter.historyData[end].pointers[id].y = y;
+                averagingTouchFilter.historyData[end].pointers[id].pressure = pressure;
+
+                // Average over all historical positions in the trace by total pressure.
+                int32_t averagedX = 0;
+                int32_t averagedY = 0;
+                int32_t totalPressure = 0;
+                for (;;) {
+                    int32_t historicalX = averagingTouchFilter.historyData[start].pointers[id].x;
+                    int32_t historicalY = averagingTouchFilter.historyData[start].pointers[id].y;
+                    int32_t historicalPressure = averagingTouchFilter.historyData[start]
+                            .pointers[id].pressure;
+
+                    averagedX += historicalX * historicalPressure;
+                    averagedY += historicalY * historicalPressure;
+                    totalPressure += historicalPressure;
+
+                    if (start == end) {
+                        break;
+                    }
+
+                    start += 1;
+                    if (start > AVERAGING_HISTORY_SIZE) {
+                        start = 0;
+                    }
+                }
+
+                averagedX /= totalPressure;
+                averagedY /= totalPressure;
+
+#if DEBUG_HACKS
+                LOGD("AveragingTouchFilter: Pointer id %d - "
+                        "totalPressure=%d, averagedX=%d, averagedY=%d", id, totalPressure,
+                        averagedX, averagedY);
+#endif
+
+                currentTouch.pointers[currentIndex].x = averagedX;
+                currentTouch.pointers[currentIndex].y = averagedY;
+            } else {
+#if DEBUG_HACKS
+                LOGD("AveragingTouchFilter: Pointer id %d - Exceeded max distance", id);
+#endif
+            }
+        } else {
+#if DEBUG_HACKS
+            LOGD("AveragingTouchFilter: Pointer id %d - Pointer went up", id);
+#endif
+        }
+
+        // Reset pointer history.
+        averagingTouchFilter.historyStart[id] = 0;
+        averagingTouchFilter.historyEnd[id] = 0;
+        averagingTouchFilter.historyData[0].pointers[id].x = x;
+        averagingTouchFilter.historyData[0].pointers[id].y = y;
+        averagingTouchFilter.historyData[0].pointers[id].pressure = pressure;
+    }
+}
+
+bool InputDevice::TouchScreenState::isPointInsideDisplay(int32_t x, int32_t y) const {
+    if (! parameters.xAxis.valid || ! parameters.yAxis.valid) {
+        // Assume all points on a touch screen without valid axis parameters are
+        // inside the display.
+        return true;
+    }
+
+    return x >= parameters.xAxis.minValue
+        && x <= parameters.xAxis.maxValue
+        && y >= parameters.yAxis.minValue
+        && y <= parameters.yAxis.maxValue;
+}
+
+const InputDevice::VirtualKey* InputDevice::TouchScreenState::findVirtualKeyHit() const {
+    int32_t x = currentTouch.pointers[0].x;
+    int32_t y = currentTouch.pointers[0].y;
+    for (size_t i = 0; i < virtualKeys.size(); i++) {
+        const InputDevice::VirtualKey& virtualKey = virtualKeys[i];
+
+#if DEBUG_VIRTUAL_KEYS
+        LOGD("VirtualKeys: Hit test (%d, %d): keyCode=%d, scanCode=%d, "
+                "left=%d, top=%d, right=%d, bottom=%d",
+                x, y,
+                virtualKey.keyCode, virtualKey.scanCode,
+                virtualKey.hitLeft, virtualKey.hitTop,
+                virtualKey.hitRight, virtualKey.hitBottom);
+#endif
+
+        if (virtualKey.isHit(x, y)) {
+            return & virtualKey;
+        }
+    }
+
+    return NULL;
+}
+
+
+// --- InputDevice::SingleTouchScreenState ---
+
+void InputDevice::SingleTouchScreenState::reset() {
+    accumulator.clear();
+    current.down = false;
+    current.x = 0;
+    current.y = 0;
+    current.pressure = 0;
+    current.size = 0;
+}
+
+
+// --- InputDevice::MultiTouchScreenState ---
+
+void InputDevice::MultiTouchScreenState::reset() {
+    accumulator.clear();
+}
+
+} // namespace android
diff --git a/libs/ui/InputDispatcher.cpp b/libs/ui/InputDispatcher.cpp
index f809cba..c4ffce1 100644
--- a/libs/ui/InputDispatcher.cpp
+++ b/libs/ui/InputDispatcher.cpp
@@ -40,10 +40,10 @@
 
 // TODO, this needs to be somewhere else, perhaps in the policy
 static inline bool isMovementKey(int32_t keyCode) {
-    return keyCode == KEYCODE_DPAD_UP
-            || keyCode == KEYCODE_DPAD_DOWN
-            || keyCode == KEYCODE_DPAD_LEFT
-            || keyCode == KEYCODE_DPAD_RIGHT;
+    return keyCode == AKEYCODE_DPAD_UP
+            || keyCode == AKEYCODE_DPAD_DOWN
+            || keyCode == AKEYCODE_DPAD_LEFT
+            || keyCode == AKEYCODE_DPAD_RIGHT;
 }
 
 static inline nsecs_t now() {
diff --git a/libs/ui/InputReader.cpp b/libs/ui/InputReader.cpp
index fced15c..0a21db7 100644
--- a/libs/ui/InputReader.cpp
+++ b/libs/ui/InputReader.cpp
@@ -33,18 +33,6 @@
 /** Amount that trackball needs to move in order to generate a key event. */
 #define TRACKBALL_MOVEMENT_THRESHOLD 6
 
-/* Slop distance for jumpy pointer detection.
- * The vertical range of the screen divided by this is our epsilon value. */
-#define JUMPY_EPSILON_DIVISOR 212
-
-/* Number of jumpy points to drop for touchscreens that need it. */
-#define JUMPY_TRANSITION_DROPS 3
-#define JUMPY_DROP_LIMIT 3
-
-/* Maximum squared distance for averaging.
- * If moving farther than this, turn of averaging to avoid lag in response. */
-#define AVERAGING_DISTANCE_LIMIT (75 * 75)
-
 
 namespace android {
 
@@ -71,19 +59,19 @@
 int32_t updateMetaState(int32_t keyCode, bool down, int32_t oldMetaState) {
     int32_t mask;
     switch (keyCode) {
-    case KEYCODE_ALT_LEFT:
+    case AKEYCODE_ALT_LEFT:
         mask = META_ALT_LEFT_ON;
         break;
-    case KEYCODE_ALT_RIGHT:
+    case AKEYCODE_ALT_RIGHT:
         mask = META_ALT_RIGHT_ON;
         break;
-    case KEYCODE_SHIFT_LEFT:
+    case AKEYCODE_SHIFT_LEFT:
         mask = META_SHIFT_LEFT_ON;
         break;
-    case KEYCODE_SHIFT_RIGHT:
+    case AKEYCODE_SHIFT_RIGHT:
         mask = META_SHIFT_RIGHT_ON;
         break;
-    case KEYCODE_SYM:
+    case AKEYCODE_SYM:
         mask = META_SYM_ON;
         break;
     default:
@@ -107,10 +95,10 @@
 static const int32_t keyCodeRotationMap[][4] = {
         // key codes enumerated counter-clockwise with the original (unrotated) key first
         // no rotation,        90 degree rotation,  180 degree rotation, 270 degree rotation
-        { KEYCODE_DPAD_DOWN,   KEYCODE_DPAD_RIGHT,  KEYCODE_DPAD_UP,     KEYCODE_DPAD_LEFT },
-        { KEYCODE_DPAD_RIGHT,  KEYCODE_DPAD_UP,     KEYCODE_DPAD_LEFT,   KEYCODE_DPAD_DOWN },
-        { KEYCODE_DPAD_UP,     KEYCODE_DPAD_LEFT,   KEYCODE_DPAD_DOWN,   KEYCODE_DPAD_RIGHT },
-        { KEYCODE_DPAD_LEFT,   KEYCODE_DPAD_DOWN,   KEYCODE_DPAD_RIGHT,  KEYCODE_DPAD_UP },
+        { AKEYCODE_DPAD_DOWN,   AKEYCODE_DPAD_RIGHT,  AKEYCODE_DPAD_UP,     AKEYCODE_DPAD_LEFT },
+        { AKEYCODE_DPAD_RIGHT,  AKEYCODE_DPAD_UP,     AKEYCODE_DPAD_LEFT,   AKEYCODE_DPAD_DOWN },
+        { AKEYCODE_DPAD_UP,     AKEYCODE_DPAD_LEFT,   AKEYCODE_DPAD_DOWN,   AKEYCODE_DPAD_RIGHT },
+        { AKEYCODE_DPAD_LEFT,   AKEYCODE_DPAD_DOWN,   AKEYCODE_DPAD_RIGHT,  AKEYCODE_DPAD_UP },
 };
 static const int keyCodeRotationMapSize =
         sizeof(keyCodeRotationMap) / sizeof(keyCodeRotationMap[0]);
@@ -127,668 +115,6 @@
 }
 
 
-// --- InputDevice ---
-
-InputDevice::InputDevice(int32_t id, uint32_t classes, String8 name) :
-    id(id), classes(classes), name(name), ignored(false) {
-}
-
-void InputDevice::reset() {
-    if (isKeyboard()) {
-        keyboard.reset();
-    }
-
-    if (isTrackball()) {
-        trackball.reset();
-    }
-
-    if (isMultiTouchScreen()) {
-        multiTouchScreen.reset();
-    } else if (isSingleTouchScreen()) {
-        singleTouchScreen.reset();
-    }
-
-    if (isTouchScreen()) {
-        touchScreen.reset();
-    }
-}
-
-
-// --- InputDevice::TouchData ---
-
-void InputDevice::TouchData::copyFrom(const TouchData& other) {
-    pointerCount = other.pointerCount;
-    idBits = other.idBits;
-
-    for (uint32_t i = 0; i < pointerCount; i++) {
-        pointers[i] = other.pointers[i];
-        idToIndex[i] = other.idToIndex[i];
-    }
-}
-
-
-// --- InputDevice::KeyboardState ---
-
-void InputDevice::KeyboardState::reset() {
-    current.metaState = META_NONE;
-    current.downTime = 0;
-}
-
-
-// --- InputDevice::TrackballState ---
-
-void InputDevice::TrackballState::reset() {
-    accumulator.clear();
-    current.down = false;
-    current.downTime = 0;
-}
-
-
-// --- InputDevice::TouchScreenState ---
-
-void InputDevice::TouchScreenState::reset() {
-    lastTouch.clear();
-    downTime = 0;
-    currentVirtualKey.status = CurrentVirtualKeyState::STATUS_UP;
-
-    for (uint32_t i = 0; i < MAX_POINTERS; i++) {
-        averagingTouchFilter.historyStart[i] = 0;
-        averagingTouchFilter.historyEnd[i] = 0;
-    }
-
-    jumpyTouchFilter.jumpyPointsDropped = 0;
-}
-
-struct PointerDistanceHeapElement {
-    uint32_t currentPointerIndex : 8;
-    uint32_t lastPointerIndex : 8;
-    uint64_t distance : 48; // squared distance
-};
-
-void InputDevice::TouchScreenState::calculatePointerIds() {
-    uint32_t currentPointerCount = currentTouch.pointerCount;
-    uint32_t lastPointerCount = lastTouch.pointerCount;
-
-    if (currentPointerCount == 0) {
-        // No pointers to assign.
-        currentTouch.idBits.clear();
-    } else if (lastPointerCount == 0) {
-        // All pointers are new.
-        currentTouch.idBits.clear();
-        for (uint32_t i = 0; i < currentPointerCount; i++) {
-            currentTouch.pointers[i].id = i;
-            currentTouch.idToIndex[i] = i;
-            currentTouch.idBits.markBit(i);
-        }
-    } else if (currentPointerCount == 1 && lastPointerCount == 1) {
-        // Only one pointer and no change in count so it must have the same id as before.
-        uint32_t id = lastTouch.pointers[0].id;
-        currentTouch.pointers[0].id = id;
-        currentTouch.idToIndex[id] = 0;
-        currentTouch.idBits.value = BitSet32::valueForBit(id);
-    } else {
-        // General case.
-        // We build a heap of squared euclidean distances between current and last pointers
-        // associated with the current and last pointer indices.  Then, we find the best
-        // match (by distance) for each current pointer.
-        PointerDistanceHeapElement heap[MAX_POINTERS * MAX_POINTERS];
-
-        uint32_t heapSize = 0;
-        for (uint32_t currentPointerIndex = 0; currentPointerIndex < currentPointerCount;
-                currentPointerIndex++) {
-            for (uint32_t lastPointerIndex = 0; lastPointerIndex < lastPointerCount;
-                    lastPointerIndex++) {
-                int64_t deltaX = currentTouch.pointers[currentPointerIndex].x
-                        - lastTouch.pointers[lastPointerIndex].x;
-                int64_t deltaY = currentTouch.pointers[currentPointerIndex].y
-                        - lastTouch.pointers[lastPointerIndex].y;
-
-                uint64_t distance = uint64_t(deltaX * deltaX + deltaY * deltaY);
-
-                // Insert new element into the heap (sift up).
-                heap[heapSize].currentPointerIndex = currentPointerIndex;
-                heap[heapSize].lastPointerIndex = lastPointerIndex;
-                heap[heapSize].distance = distance;
-                heapSize += 1;
-            }
-        }
-
-        // Heapify
-        for (uint32_t startIndex = heapSize / 2; startIndex != 0; ) {
-            startIndex -= 1;
-            for (uint32_t parentIndex = startIndex; ;) {
-                uint32_t childIndex = parentIndex * 2 + 1;
-                if (childIndex >= heapSize) {
-                    break;
-                }
-
-                if (childIndex + 1 < heapSize
-                        && heap[childIndex + 1].distance < heap[childIndex].distance) {
-                    childIndex += 1;
-                }
-
-                if (heap[parentIndex].distance <= heap[childIndex].distance) {
-                    break;
-                }
-
-                swap(heap[parentIndex], heap[childIndex]);
-                parentIndex = childIndex;
-            }
-        }
-
-#if DEBUG_POINTER_ASSIGNMENT
-        LOGD("calculatePointerIds - initial distance min-heap: size=%d", heapSize);
-        for (size_t i = 0; i < heapSize; i++) {
-            LOGD("  heap[%d]: cur=%d, last=%d, distance=%lld",
-                    i, heap[i].currentPointerIndex, heap[i].lastPointerIndex,
-                    heap[i].distance);
-        }
-#endif
-
-        // Pull matches out by increasing order of distance.
-        // To avoid reassigning pointers that have already been matched, the loop keeps track
-        // of which last and current pointers have been matched using the matchedXXXBits variables.
-        // It also tracks the used pointer id bits.
-        BitSet32 matchedLastBits(0);
-        BitSet32 matchedCurrentBits(0);
-        BitSet32 usedIdBits(0);
-        bool first = true;
-        for (uint32_t i = min(currentPointerCount, lastPointerCount); i > 0; i--) {
-            for (;;) {
-                if (first) {
-                    // The first time through the loop, we just consume the root element of
-                    // the heap (the one with smallest distance).
-                    first = false;
-                } else {
-                    // Previous iterations consumed the root element of the heap.
-                    // Pop root element off of the heap (sift down).
-                    heapSize -= 1;
-                    assert(heapSize > 0);
-
-                    // Sift down.
-                    heap[0] = heap[heapSize];
-                    for (uint32_t parentIndex = 0; ;) {
-                        uint32_t childIndex = parentIndex * 2 + 1;
-                        if (childIndex >= heapSize) {
-                            break;
-                        }
-
-                        if (childIndex + 1 < heapSize
-                                && heap[childIndex + 1].distance < heap[childIndex].distance) {
-                            childIndex += 1;
-                        }
-
-                        if (heap[parentIndex].distance <= heap[childIndex].distance) {
-                            break;
-                        }
-
-                        swap(heap[parentIndex], heap[childIndex]);
-                        parentIndex = childIndex;
-                    }
-
-#if DEBUG_POINTER_ASSIGNMENT
-                    LOGD("calculatePointerIds - reduced distance min-heap: size=%d", heapSize);
-                    for (size_t i = 0; i < heapSize; i++) {
-                        LOGD("  heap[%d]: cur=%d, last=%d, distance=%lld",
-                                i, heap[i].currentPointerIndex, heap[i].lastPointerIndex,
-                                heap[i].distance);
-                    }
-#endif
-                }
-
-                uint32_t currentPointerIndex = heap[0].currentPointerIndex;
-                if (matchedCurrentBits.hasBit(currentPointerIndex)) continue; // already matched
-
-                uint32_t lastPointerIndex = heap[0].lastPointerIndex;
-                if (matchedLastBits.hasBit(lastPointerIndex)) continue; // already matched
-
-                matchedCurrentBits.markBit(currentPointerIndex);
-                matchedLastBits.markBit(lastPointerIndex);
-
-                uint32_t id = lastTouch.pointers[lastPointerIndex].id;
-                currentTouch.pointers[currentPointerIndex].id = id;
-                currentTouch.idToIndex[id] = currentPointerIndex;
-                usedIdBits.markBit(id);
-
-#if DEBUG_POINTER_ASSIGNMENT
-                LOGD("calculatePointerIds - matched: cur=%d, last=%d, id=%d, distance=%lld",
-                        lastPointerIndex, currentPointerIndex, id, heap[0].distance);
-#endif
-                break;
-            }
-        }
-
-        // Assign fresh ids to new pointers.
-        if (currentPointerCount > lastPointerCount) {
-            for (uint32_t i = currentPointerCount - lastPointerCount; ;) {
-                uint32_t currentPointerIndex = matchedCurrentBits.firstUnmarkedBit();
-                uint32_t id = usedIdBits.firstUnmarkedBit();
-
-                currentTouch.pointers[currentPointerIndex].id = id;
-                currentTouch.idToIndex[id] = currentPointerIndex;
-                usedIdBits.markBit(id);
-
-#if DEBUG_POINTER_ASSIGNMENT
-                LOGD("calculatePointerIds - assigned: cur=%d, id=%d",
-                        currentPointerIndex, id);
-#endif
-
-                if (--i == 0) break; // done
-                matchedCurrentBits.markBit(currentPointerIndex);
-            }
-        }
-
-        // Fix id bits.
-        currentTouch.idBits = usedIdBits;
-    }
-}
-
-/* Special hack for devices that have bad screen data: if one of the
- * points has moved more than a screen height from the last position,
- * then drop it. */
-bool InputDevice::TouchScreenState::applyBadTouchFilter() {
-    // This hack requires valid axis parameters.
-    if (! parameters.yAxis.valid) {
-        return false;
-    }
-
-    uint32_t pointerCount = currentTouch.pointerCount;
-
-    // Nothing to do if there are no points.
-    if (pointerCount == 0) {
-        return false;
-    }
-
-    // Don't do anything if a finger is going down or up.  We run
-    // here before assigning pointer IDs, so there isn't a good
-    // way to do per-finger matching.
-    if (pointerCount != lastTouch.pointerCount) {
-        return false;
-    }
-
-    // We consider a single movement across more than a 7/16 of
-    // the long size of the screen to be bad.  This was a magic value
-    // determined by looking at the maximum distance it is feasible
-    // to actually move in one sample.
-    int32_t maxDeltaY = parameters.yAxis.range * 7 / 16;
-
-    // XXX The original code in InputDevice.java included commented out
-    //     code for testing the X axis.  Note that when we drop a point
-    //     we don't actually restore the old X either.  Strange.
-    //     The old code also tries to track when bad points were previously
-    //     detected but it turns out that due to the placement of a "break"
-    //     at the end of the loop, we never set mDroppedBadPoint to true
-    //     so it is effectively dead code.
-    // Need to figure out if the old code is busted or just overcomplicated
-    // but working as intended.
-
-    // Look through all new points and see if any are farther than
-    // acceptable from all previous points.
-    for (uint32_t i = pointerCount; i-- > 0; ) {
-        int32_t y = currentTouch.pointers[i].y;
-        int32_t closestY = INT_MAX;
-        int32_t closestDeltaY = 0;
-
-#if DEBUG_HACKS
-        LOGD("BadTouchFilter: Looking at next point #%d: y=%d", i, y);
-#endif
-
-        for (uint32_t j = pointerCount; j-- > 0; ) {
-            int32_t lastY = lastTouch.pointers[j].y;
-            int32_t deltaY = abs(y - lastY);
-
-#if DEBUG_HACKS
-            LOGD("BadTouchFilter: Comparing with last point #%d: y=%d deltaY=%d",
-                    j, lastY, deltaY);
-#endif
-
-            if (deltaY < maxDeltaY) {
-                goto SkipSufficientlyClosePoint;
-            }
-            if (deltaY < closestDeltaY) {
-                closestDeltaY = deltaY;
-                closestY = lastY;
-            }
-        }
-
-        // Must not have found a close enough match.
-#if DEBUG_HACKS
-        LOGD("BadTouchFilter: Dropping bad point #%d: newY=%d oldY=%d deltaY=%d maxDeltaY=%d",
-                i, y, closestY, closestDeltaY, maxDeltaY);
-#endif
-
-        currentTouch.pointers[i].y = closestY;
-        return true; // XXX original code only corrects one point
-
-    SkipSufficientlyClosePoint: ;
-    }
-
-    // No change.
-    return false;
-}
-
-/* Special hack for devices that have bad screen data: drop points where
- * the coordinate value for one axis has jumped to the other pointer's location.
- */
-bool InputDevice::TouchScreenState::applyJumpyTouchFilter() {
-    // This hack requires valid axis parameters.
-    if (! parameters.yAxis.valid) {
-        return false;
-    }
-
-    uint32_t pointerCount = currentTouch.pointerCount;
-    if (lastTouch.pointerCount != pointerCount) {
-#if DEBUG_HACKS
-        LOGD("JumpyTouchFilter: Different pointer count %d -> %d",
-                lastTouch.pointerCount, pointerCount);
-        for (uint32_t i = 0; i < pointerCount; i++) {
-            LOGD("  Pointer %d (%d, %d)", i,
-                    currentTouch.pointers[i].x, currentTouch.pointers[i].y);
-        }
-#endif
-
-        if (jumpyTouchFilter.jumpyPointsDropped < JUMPY_TRANSITION_DROPS) {
-            if (lastTouch.pointerCount == 1 && pointerCount == 2) {
-                // Just drop the first few events going from 1 to 2 pointers.
-                // They're bad often enough that they're not worth considering.
-                currentTouch.pointerCount = 1;
-                jumpyTouchFilter.jumpyPointsDropped += 1;
-
-#if DEBUG_HACKS
-                LOGD("JumpyTouchFilter: Pointer 2 dropped");
-#endif
-                return true;
-            } else if (lastTouch.pointerCount == 2 && pointerCount == 1) {
-                // The event when we go from 2 -> 1 tends to be messed up too
-                currentTouch.pointerCount = 2;
-                currentTouch.pointers[0] = lastTouch.pointers[0];
-                currentTouch.pointers[1] = lastTouch.pointers[1];
-                jumpyTouchFilter.jumpyPointsDropped += 1;
-
-#if DEBUG_HACKS
-                for (int32_t i = 0; i < 2; i++) {
-                    LOGD("JumpyTouchFilter: Pointer %d replaced (%d, %d)", i,
-                            currentTouch.pointers[i].x, currentTouch.pointers[i].y);
-                }
-#endif
-                return true;
-            }
-        }
-        // Reset jumpy points dropped on other transitions or if limit exceeded.
-        jumpyTouchFilter.jumpyPointsDropped = 0;
-
-#if DEBUG_HACKS
-        LOGD("JumpyTouchFilter: Transition - drop limit reset");
-#endif
-        return false;
-    }
-
-    // We have the same number of pointers as last time.
-    // A 'jumpy' point is one where the coordinate value for one axis
-    // has jumped to the other pointer's location. No need to do anything
-    // else if we only have one pointer.
-    if (pointerCount < 2) {
-        return false;
-    }
-
-    if (jumpyTouchFilter.jumpyPointsDropped < JUMPY_DROP_LIMIT) {
-        int jumpyEpsilon = parameters.yAxis.range / JUMPY_EPSILON_DIVISOR;
-
-        // We only replace the single worst jumpy point as characterized by pointer distance
-        // in a single axis.
-        int32_t badPointerIndex = -1;
-        int32_t badPointerReplacementIndex = -1;
-        int32_t badPointerDistance = INT_MIN; // distance to be corrected
-
-        for (uint32_t i = pointerCount; i-- > 0; ) {
-            int32_t x = currentTouch.pointers[i].x;
-            int32_t y = currentTouch.pointers[i].y;
-
-#if DEBUG_HACKS
-            LOGD("JumpyTouchFilter: Point %d (%d, %d)", i, x, y);
-#endif
-
-            // Check if a touch point is too close to another's coordinates
-            bool dropX = false, dropY = false;
-            for (uint32_t j = 0; j < pointerCount; j++) {
-                if (i == j) {
-                    continue;
-                }
-
-                if (abs(x - currentTouch.pointers[j].x) <= jumpyEpsilon) {
-                    dropX = true;
-                    break;
-                }
-
-                if (abs(y - currentTouch.pointers[j].y) <= jumpyEpsilon) {
-                    dropY = true;
-                    break;
-                }
-            }
-            if (! dropX && ! dropY) {
-                continue; // not jumpy
-            }
-
-            // Find a replacement candidate by comparing with older points on the
-            // complementary (non-jumpy) axis.
-            int32_t distance = INT_MIN; // distance to be corrected
-            int32_t replacementIndex = -1;
-
-            if (dropX) {
-                // X looks too close.  Find an older replacement point with a close Y.
-                int32_t smallestDeltaY = INT_MAX;
-                for (uint32_t j = 0; j < pointerCount; j++) {
-                    int32_t deltaY = abs(y - lastTouch.pointers[j].y);
-                    if (deltaY < smallestDeltaY) {
-                        smallestDeltaY = deltaY;
-                        replacementIndex = j;
-                    }
-                }
-                distance = abs(x - lastTouch.pointers[replacementIndex].x);
-            } else {
-                // Y looks too close.  Find an older replacement point with a close X.
-                int32_t smallestDeltaX = INT_MAX;
-                for (uint32_t j = 0; j < pointerCount; j++) {
-                    int32_t deltaX = abs(x - lastTouch.pointers[j].x);
-                    if (deltaX < smallestDeltaX) {
-                        smallestDeltaX = deltaX;
-                        replacementIndex = j;
-                    }
-                }
-                distance = abs(y - lastTouch.pointers[replacementIndex].y);
-            }
-
-            // If replacing this pointer would correct a worse error than the previous ones
-            // considered, then use this replacement instead.
-            if (distance > badPointerDistance) {
-                badPointerIndex = i;
-                badPointerReplacementIndex = replacementIndex;
-                badPointerDistance = distance;
-            }
-        }
-
-        // Correct the jumpy pointer if one was found.
-        if (badPointerIndex >= 0) {
-#if DEBUG_HACKS
-            LOGD("JumpyTouchFilter: Replacing bad pointer %d with (%d, %d)",
-                    badPointerIndex,
-                    lastTouch.pointers[badPointerReplacementIndex].x,
-                    lastTouch.pointers[badPointerReplacementIndex].y);
-#endif
-
-            currentTouch.pointers[badPointerIndex].x =
-                    lastTouch.pointers[badPointerReplacementIndex].x;
-            currentTouch.pointers[badPointerIndex].y =
-                    lastTouch.pointers[badPointerReplacementIndex].y;
-            jumpyTouchFilter.jumpyPointsDropped += 1;
-            return true;
-        }
-    }
-
-    jumpyTouchFilter.jumpyPointsDropped = 0;
-    return false;
-}
-
-/* Special hack for devices that have bad screen data: aggregate and
- * compute averages of the coordinate data, to reduce the amount of
- * jitter seen by applications. */
-void InputDevice::TouchScreenState::applyAveragingTouchFilter() {
-    for (uint32_t currentIndex = 0; currentIndex < currentTouch.pointerCount; currentIndex++) {
-        uint32_t id = currentTouch.pointers[currentIndex].id;
-        int32_t x = currentTouch.pointers[currentIndex].x;
-        int32_t y = currentTouch.pointers[currentIndex].y;
-        int32_t pressure = currentTouch.pointers[currentIndex].pressure;
-
-        if (lastTouch.idBits.hasBit(id)) {
-            // Pointer was down before and is still down now.
-            // Compute average over history trace.
-            uint32_t start = averagingTouchFilter.historyStart[id];
-            uint32_t end = averagingTouchFilter.historyEnd[id];
-
-            int64_t deltaX = x - averagingTouchFilter.historyData[end].pointers[id].x;
-            int64_t deltaY = y - averagingTouchFilter.historyData[end].pointers[id].y;
-            uint64_t distance = uint64_t(deltaX * deltaX + deltaY * deltaY);
-
-#if DEBUG_HACKS
-            LOGD("AveragingTouchFilter: Pointer id %d - Distance from last sample: %lld",
-                    id, distance);
-#endif
-
-            if (distance < AVERAGING_DISTANCE_LIMIT) {
-                // Increment end index in preparation for recording new historical data.
-                end += 1;
-                if (end > AVERAGING_HISTORY_SIZE) {
-                    end = 0;
-                }
-
-                // If the end index has looped back to the start index then we have filled
-                // the historical trace up to the desired size so we drop the historical
-                // data at the start of the trace.
-                if (end == start) {
-                    start += 1;
-                    if (start > AVERAGING_HISTORY_SIZE) {
-                        start = 0;
-                    }
-                }
-
-                // Add the raw data to the historical trace.
-                averagingTouchFilter.historyStart[id] = start;
-                averagingTouchFilter.historyEnd[id] = end;
-                averagingTouchFilter.historyData[end].pointers[id].x = x;
-                averagingTouchFilter.historyData[end].pointers[id].y = y;
-                averagingTouchFilter.historyData[end].pointers[id].pressure = pressure;
-
-                // Average over all historical positions in the trace by total pressure.
-                int32_t averagedX = 0;
-                int32_t averagedY = 0;
-                int32_t totalPressure = 0;
-                for (;;) {
-                    int32_t historicalX = averagingTouchFilter.historyData[start].pointers[id].x;
-                    int32_t historicalY = averagingTouchFilter.historyData[start].pointers[id].y;
-                    int32_t historicalPressure = averagingTouchFilter.historyData[start]
-                            .pointers[id].pressure;
-
-                    averagedX += historicalX * historicalPressure;
-                    averagedY += historicalY * historicalPressure;
-                    totalPressure += historicalPressure;
-
-                    if (start == end) {
-                        break;
-                    }
-
-                    start += 1;
-                    if (start > AVERAGING_HISTORY_SIZE) {
-                        start = 0;
-                    }
-                }
-
-                averagedX /= totalPressure;
-                averagedY /= totalPressure;
-
-#if DEBUG_HACKS
-                LOGD("AveragingTouchFilter: Pointer id %d - "
-                        "totalPressure=%d, averagedX=%d, averagedY=%d", id, totalPressure,
-                        averagedX, averagedY);
-#endif
-
-                currentTouch.pointers[currentIndex].x = averagedX;
-                currentTouch.pointers[currentIndex].y = averagedY;
-            } else {
-#if DEBUG_HACKS
-                LOGD("AveragingTouchFilter: Pointer id %d - Exceeded max distance", id);
-#endif
-            }
-        } else {
-#if DEBUG_HACKS
-            LOGD("AveragingTouchFilter: Pointer id %d - Pointer went up", id);
-#endif
-        }
-
-        // Reset pointer history.
-        averagingTouchFilter.historyStart[id] = 0;
-        averagingTouchFilter.historyEnd[id] = 0;
-        averagingTouchFilter.historyData[0].pointers[id].x = x;
-        averagingTouchFilter.historyData[0].pointers[id].y = y;
-        averagingTouchFilter.historyData[0].pointers[id].pressure = pressure;
-    }
-}
-
-bool InputDevice::TouchScreenState::isPointInsideDisplay(int32_t x, int32_t y) const {
-    if (! parameters.xAxis.valid || ! parameters.yAxis.valid) {
-        // Assume all points on a touch screen without valid axis parameters are
-        // inside the display.
-        return true;
-    }
-
-    return x >= parameters.xAxis.minValue
-        && x <= parameters.xAxis.maxValue
-        && y >= parameters.yAxis.minValue
-        && y <= parameters.yAxis.maxValue;
-}
-
-const InputDevice::VirtualKey* InputDevice::TouchScreenState::findVirtualKeyHit() const {
-    int32_t x = currentTouch.pointers[0].x;
-    int32_t y = currentTouch.pointers[0].y;
-    for (size_t i = 0; i < virtualKeys.size(); i++) {
-        const InputDevice::VirtualKey& virtualKey = virtualKeys[i];
-
-#if DEBUG_VIRTUAL_KEYS
-        LOGD("VirtualKeys: Hit test (%d, %d): keyCode=%d, scanCode=%d, "
-                "left=%d, top=%d, right=%d, bottom=%d",
-                x, y,
-                virtualKey.keyCode, virtualKey.scanCode,
-                virtualKey.hitLeft, virtualKey.hitTop,
-                virtualKey.hitRight, virtualKey.hitBottom);
-#endif
-
-        if (virtualKey.isHit(x, y)) {
-            return & virtualKey;
-        }
-    }
-
-    return NULL;
-}
-
-
-// --- InputDevice::SingleTouchScreenState ---
-
-void InputDevice::SingleTouchScreenState::reset() {
-    accumulator.clear();
-    current.down = false;
-    current.x = 0;
-    current.y = 0;
-    current.pressure = 0;
-    current.size = 0;
-}
-
-
-// --- InputDevice::MultiTouchScreenState ---
-
-void InputDevice::MultiTouchScreenState::reset() {
-    accumulator.clear();
-}
-
-
 // --- InputReader ---
 
 InputReader::InputReader(const sp<EventHubInterface>& eventHub,
@@ -927,32 +253,30 @@
     bool down = rawEvent->value != 0;
     int32_t scanCode = rawEvent->scanCode;
 
-    if (device->isKeyboard() && (scanCode < BTN_FIRST || scanCode > BTN_LAST)) {
-        int32_t keyCode = rawEvent->keyCode;
-        onKey(rawEvent->when, device, down, keyCode, scanCode, rawEvent->flags);
-    } else if (device->isSingleTouchScreen()) {
+    if (device->isSingleTouchScreen()) {
         switch (rawEvent->scanCode) {
         case BTN_TOUCH:
             device->singleTouchScreen.accumulator.fields |=
                     InputDevice::SingleTouchScreenState::Accumulator::FIELD_BTN_TOUCH;
             device->singleTouchScreen.accumulator.btnTouch = down;
-            break;
+            return;
         }
-    } else if (device->isTrackball()) {
+    }
+
+    if (device->isTrackball()) {
         switch (rawEvent->scanCode) {
         case BTN_MOUSE:
             device->trackball.accumulator.fields |=
                     InputDevice::TrackballState::Accumulator::FIELD_BTN_MOUSE;
             device->trackball.accumulator.btnMouse = down;
-
-            // send the down immediately
-            // XXX this emulates the old behavior of KeyInputQueue, unclear whether it is
-            //     necessary or if we can wait until the next sync
-            onTrackballStateChanged(rawEvent->when, device);
-            device->trackball.accumulator.clear();
-            break;
+            return;
         }
     }
+
+    if (device->isKeyboard()) {
+        int32_t keyCode = rawEvent->keyCode;
+        onKey(rawEvent->when, device, down, keyCode, scanCode, rawEvent->flags);
+    }
 }
 
 void InputReader::handleRelativeMotion(const RawEvent* rawEvent) {
diff --git a/libs/ui/tests/InputPublisherAndConsumer_test.cpp b/libs/ui/tests/InputPublisherAndConsumer_test.cpp
index 2d6b531..55504f2 100644
--- a/libs/ui/tests/InputPublisherAndConsumer_test.cpp
+++ b/libs/ui/tests/InputPublisherAndConsumer_test.cpp
@@ -76,7 +76,7 @@
     const int32_t nature = INPUT_EVENT_NATURE_KEY;
     const int32_t action = KEY_EVENT_ACTION_DOWN;
     const int32_t flags = KEY_EVENT_FLAG_FROM_SYSTEM;
-    const int32_t keyCode = KEYCODE_ENTER;
+    const int32_t keyCode = AKEYCODE_ENTER;
     const int32_t scanCode = 13;
     const int32_t metaState = META_ALT_LEFT_ON | META_ALT_ON;
     const int32_t repeatCount = 1;
diff --git a/libs/utils/Android.mk b/libs/utils/Android.mk
index 2bb42ab..8bd5823 100644
--- a/libs/utils/Android.mk
+++ b/libs/utils/Android.mk
@@ -122,3 +122,13 @@
 include $(BUILD_STATIC_LIBRARY)
 endif
 endif
+
+
+# Include subdirectory makefiles
+# ============================================================
+
+# If we're building with ONE_SHOT_MAKEFILE (mm, mmm), then what the framework
+# team really wants is to build the stuff defined by this makefile.
+ifeq (,$(ONE_SHOT_MAKEFILE))
+include $(call first-makefiles-under,$(LOCAL_PATH))
+endif
\ No newline at end of file