| /* |
| * Copyright 2014 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <inttypes.h> |
| |
| #define LOG_TAG "BufferQueueProducer" |
| #define ATRACE_TAG ATRACE_TAG_GRAPHICS |
| //#define LOG_NDEBUG 0 |
| |
| #if DEBUG_ONLY_CODE |
| #define VALIDATE_CONSISTENCY() do { mCore->validateConsistencyLocked(); } while (0) |
| #else |
| #define VALIDATE_CONSISTENCY() |
| #endif |
| |
| #define EGL_EGLEXT_PROTOTYPES |
| |
| #include <binder/IPCThreadState.h> |
| #include <gui/BufferItem.h> |
| #include <gui/BufferQueueCore.h> |
| #include <gui/BufferQueueProducer.h> |
| #include <gui/GLConsumer.h> |
| #include <gui/IConsumerListener.h> |
| #include <gui/IProducerListener.h> |
| |
| #include <utils/Log.h> |
| #include <utils/Trace.h> |
| |
| namespace android { |
| |
| static constexpr uint32_t BQ_LAYER_COUNT = 1; |
| |
| BufferQueueProducer::BufferQueueProducer(const sp<BufferQueueCore>& core, |
| bool consumerIsSurfaceFlinger) : |
| mCore(core), |
| mSlots(core->mSlots), |
| mConsumerName(), |
| mStickyTransform(0), |
| mConsumerIsSurfaceFlinger(consumerIsSurfaceFlinger), |
| mLastQueueBufferFence(Fence::NO_FENCE), |
| mLastQueuedTransform(0), |
| mCallbackMutex(), |
| mNextCallbackTicket(0), |
| mCurrentCallbackTicket(0), |
| mCallbackCondition(), |
| mDequeueTimeout(-1) {} |
| |
| BufferQueueProducer::~BufferQueueProducer() {} |
| |
| status_t BufferQueueProducer::requestBuffer(int slot, sp<GraphicBuffer>* buf) { |
| ATRACE_CALL(); |
| BQ_LOGV("requestBuffer: slot %d", slot); |
| Mutex::Autolock lock(mCore->mMutex); |
| |
| if (mCore->mIsAbandoned) { |
| BQ_LOGE("requestBuffer: BufferQueue has been abandoned"); |
| return NO_INIT; |
| } |
| |
| if (mCore->mConnectedApi == BufferQueueCore::NO_CONNECTED_API) { |
| BQ_LOGE("requestBuffer: BufferQueue has no connected producer"); |
| return NO_INIT; |
| } |
| |
| if (slot < 0 || slot >= BufferQueueDefs::NUM_BUFFER_SLOTS) { |
| BQ_LOGE("requestBuffer: slot index %d out of range [0, %d)", |
| slot, BufferQueueDefs::NUM_BUFFER_SLOTS); |
| return BAD_VALUE; |
| } else if (!mSlots[slot].mBufferState.isDequeued()) { |
| BQ_LOGE("requestBuffer: slot %d is not owned by the producer " |
| "(state = %s)", slot, mSlots[slot].mBufferState.string()); |
| return BAD_VALUE; |
| } |
| |
| mSlots[slot].mRequestBufferCalled = true; |
| *buf = mSlots[slot].mGraphicBuffer; |
| return NO_ERROR; |
| } |
| |
| status_t BufferQueueProducer::setMaxDequeuedBufferCount( |
| int maxDequeuedBuffers) { |
| ATRACE_CALL(); |
| BQ_LOGV("setMaxDequeuedBufferCount: maxDequeuedBuffers = %d", |
| maxDequeuedBuffers); |
| |
| sp<IConsumerListener> listener; |
| { // Autolock scope |
| Mutex::Autolock lock(mCore->mMutex); |
| mCore->waitWhileAllocatingLocked(); |
| |
| if (mCore->mIsAbandoned) { |
| BQ_LOGE("setMaxDequeuedBufferCount: BufferQueue has been " |
| "abandoned"); |
| return NO_INIT; |
| } |
| |
| if (maxDequeuedBuffers == mCore->mMaxDequeuedBufferCount) { |
| return NO_ERROR; |
| } |
| |
| // The new maxDequeuedBuffer count should not be violated by the number |
| // of currently dequeued buffers |
| int dequeuedCount = 0; |
| for (int s : mCore->mActiveBuffers) { |
| if (mSlots[s].mBufferState.isDequeued()) { |
| dequeuedCount++; |
| } |
| } |
| if (dequeuedCount > maxDequeuedBuffers) { |
| BQ_LOGE("setMaxDequeuedBufferCount: the requested maxDequeuedBuffer" |
| "count (%d) exceeds the current dequeued buffer count (%d)", |
| maxDequeuedBuffers, dequeuedCount); |
| return BAD_VALUE; |
| } |
| |
| int bufferCount = mCore->getMinUndequeuedBufferCountLocked(); |
| bufferCount += maxDequeuedBuffers; |
| |
| if (bufferCount > BufferQueueDefs::NUM_BUFFER_SLOTS) { |
| BQ_LOGE("setMaxDequeuedBufferCount: bufferCount %d too large " |
| "(max %d)", bufferCount, BufferQueueDefs::NUM_BUFFER_SLOTS); |
| return BAD_VALUE; |
| } |
| |
| const int minBufferSlots = mCore->getMinMaxBufferCountLocked(); |
| if (bufferCount < minBufferSlots) { |
| BQ_LOGE("setMaxDequeuedBufferCount: requested buffer count %d is " |
| "less than minimum %d", bufferCount, minBufferSlots); |
| return BAD_VALUE; |
| } |
| |
| if (bufferCount > mCore->mMaxBufferCount) { |
| BQ_LOGE("setMaxDequeuedBufferCount: %d dequeued buffers would " |
| "exceed the maxBufferCount (%d) (maxAcquired %d async %d " |
| "mDequeuedBufferCannotBlock %d)", maxDequeuedBuffers, |
| mCore->mMaxBufferCount, mCore->mMaxAcquiredBufferCount, |
| mCore->mAsyncMode, mCore->mDequeueBufferCannotBlock); |
| return BAD_VALUE; |
| } |
| |
| int delta = maxDequeuedBuffers - mCore->mMaxDequeuedBufferCount; |
| if (!mCore->adjustAvailableSlotsLocked(delta)) { |
| return BAD_VALUE; |
| } |
| mCore->mMaxDequeuedBufferCount = maxDequeuedBuffers; |
| VALIDATE_CONSISTENCY(); |
| if (delta < 0) { |
| listener = mCore->mConsumerListener; |
| } |
| mCore->mDequeueCondition.broadcast(); |
| } // Autolock scope |
| |
| // Call back without lock held |
| if (listener != NULL) { |
| listener->onBuffersReleased(); |
| } |
| |
| return NO_ERROR; |
| } |
| |
| status_t BufferQueueProducer::setAsyncMode(bool async) { |
| ATRACE_CALL(); |
| BQ_LOGV("setAsyncMode: async = %d", async); |
| |
| sp<IConsumerListener> listener; |
| { // Autolock scope |
| Mutex::Autolock lock(mCore->mMutex); |
| mCore->waitWhileAllocatingLocked(); |
| |
| if (mCore->mIsAbandoned) { |
| BQ_LOGE("setAsyncMode: BufferQueue has been abandoned"); |
| return NO_INIT; |
| } |
| |
| if (async == mCore->mAsyncMode) { |
| return NO_ERROR; |
| } |
| |
| if ((mCore->mMaxAcquiredBufferCount + mCore->mMaxDequeuedBufferCount + |
| (async || mCore->mDequeueBufferCannotBlock ? 1 : 0)) > |
| mCore->mMaxBufferCount) { |
| BQ_LOGE("setAsyncMode(%d): this call would cause the " |
| "maxBufferCount (%d) to be exceeded (maxAcquired %d " |
| "maxDequeued %d mDequeueBufferCannotBlock %d)", async, |
| mCore->mMaxBufferCount, mCore->mMaxAcquiredBufferCount, |
| mCore->mMaxDequeuedBufferCount, |
| mCore->mDequeueBufferCannotBlock); |
| return BAD_VALUE; |
| } |
| |
| int delta = mCore->getMaxBufferCountLocked(async, |
| mCore->mDequeueBufferCannotBlock, mCore->mMaxBufferCount) |
| - mCore->getMaxBufferCountLocked(); |
| |
| if (!mCore->adjustAvailableSlotsLocked(delta)) { |
| BQ_LOGE("setAsyncMode: BufferQueue failed to adjust the number of " |
| "available slots. Delta = %d", delta); |
| return BAD_VALUE; |
| } |
| mCore->mAsyncMode = async; |
| VALIDATE_CONSISTENCY(); |
| mCore->mDequeueCondition.broadcast(); |
| if (delta < 0) { |
| listener = mCore->mConsumerListener; |
| } |
| } // Autolock scope |
| |
| // Call back without lock held |
| if (listener != NULL) { |
| listener->onBuffersReleased(); |
| } |
| return NO_ERROR; |
| } |
| |
| int BufferQueueProducer::getFreeBufferLocked() const { |
| if (mCore->mFreeBuffers.empty()) { |
| return BufferQueueCore::INVALID_BUFFER_SLOT; |
| } |
| int slot = mCore->mFreeBuffers.front(); |
| mCore->mFreeBuffers.pop_front(); |
| return slot; |
| } |
| |
| int BufferQueueProducer::getFreeSlotLocked() const { |
| if (mCore->mFreeSlots.empty()) { |
| return BufferQueueCore::INVALID_BUFFER_SLOT; |
| } |
| int slot = *(mCore->mFreeSlots.begin()); |
| mCore->mFreeSlots.erase(slot); |
| return slot; |
| } |
| |
| status_t BufferQueueProducer::waitForFreeSlotThenRelock(FreeSlotCaller caller, |
| int* found) const { |
| auto callerString = (caller == FreeSlotCaller::Dequeue) ? |
| "dequeueBuffer" : "attachBuffer"; |
| bool tryAgain = true; |
| while (tryAgain) { |
| if (mCore->mIsAbandoned) { |
| BQ_LOGE("%s: BufferQueue has been abandoned", callerString); |
| return NO_INIT; |
| } |
| |
| int dequeuedCount = 0; |
| int acquiredCount = 0; |
| for (int s : mCore->mActiveBuffers) { |
| if (mSlots[s].mBufferState.isDequeued()) { |
| ++dequeuedCount; |
| } |
| if (mSlots[s].mBufferState.isAcquired()) { |
| ++acquiredCount; |
| } |
| } |
| |
| // Producers are not allowed to dequeue more than |
| // mMaxDequeuedBufferCount buffers. |
| // This check is only done if a buffer has already been queued |
| if (mCore->mBufferHasBeenQueued && |
| dequeuedCount >= mCore->mMaxDequeuedBufferCount) { |
| BQ_LOGE("%s: attempting to exceed the max dequeued buffer count " |
| "(%d)", callerString, mCore->mMaxDequeuedBufferCount); |
| return INVALID_OPERATION; |
| } |
| |
| *found = BufferQueueCore::INVALID_BUFFER_SLOT; |
| |
| // If we disconnect and reconnect quickly, we can be in a state where |
| // our slots are empty but we have many buffers in the queue. This can |
| // cause us to run out of memory if we outrun the consumer. Wait here if |
| // it looks like we have too many buffers queued up. |
| const int maxBufferCount = mCore->getMaxBufferCountLocked(); |
| bool tooManyBuffers = mCore->mQueue.size() |
| > static_cast<size_t>(maxBufferCount); |
| if (tooManyBuffers) { |
| BQ_LOGV("%s: queue size is %zu, waiting", callerString, |
| mCore->mQueue.size()); |
| } else { |
| // If in shared buffer mode and a shared buffer exists, always |
| // return it. |
| if (mCore->mSharedBufferMode && mCore->mSharedBufferSlot != |
| BufferQueueCore::INVALID_BUFFER_SLOT) { |
| *found = mCore->mSharedBufferSlot; |
| } else { |
| if (caller == FreeSlotCaller::Dequeue) { |
| // If we're calling this from dequeue, prefer free buffers |
| int slot = getFreeBufferLocked(); |
| if (slot != BufferQueueCore::INVALID_BUFFER_SLOT) { |
| *found = slot; |
| } else if (mCore->mAllowAllocation) { |
| *found = getFreeSlotLocked(); |
| } |
| } else { |
| // If we're calling this from attach, prefer free slots |
| int slot = getFreeSlotLocked(); |
| if (slot != BufferQueueCore::INVALID_BUFFER_SLOT) { |
| *found = slot; |
| } else { |
| *found = getFreeBufferLocked(); |
| } |
| } |
| } |
| } |
| |
| // If no buffer is found, or if the queue has too many buffers |
| // outstanding, wait for a buffer to be acquired or released, or for the |
| // max buffer count to change. |
| tryAgain = (*found == BufferQueueCore::INVALID_BUFFER_SLOT) || |
| tooManyBuffers; |
| if (tryAgain) { |
| // Return an error if we're in non-blocking mode (producer and |
| // consumer are controlled by the application). |
| // However, the consumer is allowed to briefly acquire an extra |
| // buffer (which could cause us to have to wait here), which is |
| // okay, since it is only used to implement an atomic acquire + |
| // release (e.g., in GLConsumer::updateTexImage()) |
| if ((mCore->mDequeueBufferCannotBlock || mCore->mAsyncMode) && |
| (acquiredCount <= mCore->mMaxAcquiredBufferCount)) { |
| return WOULD_BLOCK; |
| } |
| if (mDequeueTimeout >= 0) { |
| status_t result = mCore->mDequeueCondition.waitRelative( |
| mCore->mMutex, mDequeueTimeout); |
| if (result == TIMED_OUT) { |
| return result; |
| } |
| } else { |
| mCore->mDequeueCondition.wait(mCore->mMutex); |
| } |
| } |
| } // while (tryAgain) |
| |
| return NO_ERROR; |
| } |
| |
| status_t BufferQueueProducer::dequeueBuffer(int *outSlot, |
| sp<android::Fence> *outFence, uint32_t width, uint32_t height, |
| PixelFormat format, uint32_t usage, |
| FrameEventHistoryDelta* outTimestamps) { |
| ATRACE_CALL(); |
| { // Autolock scope |
| Mutex::Autolock lock(mCore->mMutex); |
| mConsumerName = mCore->mConsumerName; |
| |
| if (mCore->mIsAbandoned) { |
| BQ_LOGE("dequeueBuffer: BufferQueue has been abandoned"); |
| return NO_INIT; |
| } |
| |
| if (mCore->mConnectedApi == BufferQueueCore::NO_CONNECTED_API) { |
| BQ_LOGE("dequeueBuffer: BufferQueue has no connected producer"); |
| return NO_INIT; |
| } |
| } // Autolock scope |
| |
| BQ_LOGV("dequeueBuffer: w=%u h=%u format=%#x, usage=%#x", width, height, |
| format, usage); |
| |
| if ((width && !height) || (!width && height)) { |
| BQ_LOGE("dequeueBuffer: invalid size: w=%u h=%u", width, height); |
| return BAD_VALUE; |
| } |
| |
| status_t returnFlags = NO_ERROR; |
| EGLDisplay eglDisplay = EGL_NO_DISPLAY; |
| EGLSyncKHR eglFence = EGL_NO_SYNC_KHR; |
| bool attachedByConsumer = false; |
| |
| { // Autolock scope |
| Mutex::Autolock lock(mCore->mMutex); |
| mCore->waitWhileAllocatingLocked(); |
| |
| if (format == 0) { |
| format = mCore->mDefaultBufferFormat; |
| } |
| |
| // Enable the usage bits the consumer requested |
| usage |= mCore->mConsumerUsageBits; |
| |
| const bool useDefaultSize = !width && !height; |
| if (useDefaultSize) { |
| width = mCore->mDefaultWidth; |
| height = mCore->mDefaultHeight; |
| } |
| |
| int found = BufferItem::INVALID_BUFFER_SLOT; |
| while (found == BufferItem::INVALID_BUFFER_SLOT) { |
| status_t status = waitForFreeSlotThenRelock(FreeSlotCaller::Dequeue, |
| &found); |
| if (status != NO_ERROR) { |
| return status; |
| } |
| |
| // This should not happen |
| if (found == BufferQueueCore::INVALID_BUFFER_SLOT) { |
| BQ_LOGE("dequeueBuffer: no available buffer slots"); |
| return -EBUSY; |
| } |
| |
| const sp<GraphicBuffer>& buffer(mSlots[found].mGraphicBuffer); |
| |
| // If we are not allowed to allocate new buffers, |
| // waitForFreeSlotThenRelock must have returned a slot containing a |
| // buffer. If this buffer would require reallocation to meet the |
| // requested attributes, we free it and attempt to get another one. |
| if (!mCore->mAllowAllocation) { |
| if (buffer->needsReallocation(width, height, format, |
| BQ_LAYER_COUNT, usage)) { |
| if (mCore->mSharedBufferSlot == found) { |
| BQ_LOGE("dequeueBuffer: cannot re-allocate a shared" |
| "buffer"); |
| return BAD_VALUE; |
| } |
| mCore->mFreeSlots.insert(found); |
| mCore->clearBufferSlotLocked(found); |
| found = BufferItem::INVALID_BUFFER_SLOT; |
| continue; |
| } |
| } |
| } |
| |
| const sp<GraphicBuffer>& buffer(mSlots[found].mGraphicBuffer); |
| if (mCore->mSharedBufferSlot == found && |
| buffer->needsReallocation(width, height, format, |
| BQ_LAYER_COUNT, usage)) { |
| BQ_LOGE("dequeueBuffer: cannot re-allocate a shared" |
| "buffer"); |
| |
| return BAD_VALUE; |
| } |
| |
| if (mCore->mSharedBufferSlot != found) { |
| mCore->mActiveBuffers.insert(found); |
| } |
| *outSlot = found; |
| ATRACE_BUFFER_INDEX(found); |
| |
| attachedByConsumer = mSlots[found].mNeedsReallocation; |
| mSlots[found].mNeedsReallocation = false; |
| |
| mSlots[found].mBufferState.dequeue(); |
| |
| if ((buffer == NULL) || |
| buffer->needsReallocation(width, height, format, BQ_LAYER_COUNT, usage)) |
| { |
| mSlots[found].mAcquireCalled = false; |
| mSlots[found].mGraphicBuffer = NULL; |
| mSlots[found].mRequestBufferCalled = false; |
| mSlots[found].mEglDisplay = EGL_NO_DISPLAY; |
| mSlots[found].mEglFence = EGL_NO_SYNC_KHR; |
| mSlots[found].mFence = Fence::NO_FENCE; |
| mCore->mBufferAge = 0; |
| mCore->mIsAllocating = true; |
| |
| returnFlags |= BUFFER_NEEDS_REALLOCATION; |
| } else { |
| // We add 1 because that will be the frame number when this buffer |
| // is queued |
| mCore->mBufferAge = |
| mCore->mFrameCounter + 1 - mSlots[found].mFrameNumber; |
| } |
| |
| BQ_LOGV("dequeueBuffer: setting buffer age to %" PRIu64, |
| mCore->mBufferAge); |
| |
| if (CC_UNLIKELY(mSlots[found].mFence == NULL)) { |
| BQ_LOGE("dequeueBuffer: about to return a NULL fence - " |
| "slot=%d w=%d h=%d format=%u", |
| found, buffer->width, buffer->height, buffer->format); |
| } |
| |
| eglDisplay = mSlots[found].mEglDisplay; |
| eglFence = mSlots[found].mEglFence; |
| // Don't return a fence in shared buffer mode, except for the first |
| // frame. |
| *outFence = (mCore->mSharedBufferMode && |
| mCore->mSharedBufferSlot == found) ? |
| Fence::NO_FENCE : mSlots[found].mFence; |
| mSlots[found].mEglFence = EGL_NO_SYNC_KHR; |
| mSlots[found].mFence = Fence::NO_FENCE; |
| |
| // If shared buffer mode has just been enabled, cache the slot of the |
| // first buffer that is dequeued and mark it as the shared buffer. |
| if (mCore->mSharedBufferMode && mCore->mSharedBufferSlot == |
| BufferQueueCore::INVALID_BUFFER_SLOT) { |
| mCore->mSharedBufferSlot = found; |
| mSlots[found].mBufferState.mShared = true; |
| } |
| } // Autolock scope |
| |
| if (returnFlags & BUFFER_NEEDS_REALLOCATION) { |
| BQ_LOGV("dequeueBuffer: allocating a new buffer for slot %d", *outSlot); |
| sp<GraphicBuffer> graphicBuffer = new GraphicBuffer( |
| width, height, format, BQ_LAYER_COUNT, usage, |
| {mConsumerName.string(), mConsumerName.size()}); |
| |
| status_t error = graphicBuffer->initCheck(); |
| |
| { // Autolock scope |
| Mutex::Autolock lock(mCore->mMutex); |
| |
| if (graphicBuffer != NULL && !mCore->mIsAbandoned) { |
| graphicBuffer->setGenerationNumber(mCore->mGenerationNumber); |
| mSlots[*outSlot].mGraphicBuffer = graphicBuffer; |
| } |
| |
| mCore->mIsAllocating = false; |
| mCore->mIsAllocatingCondition.broadcast(); |
| |
| if (graphicBuffer == NULL) { |
| mCore->mFreeSlots.insert(*outSlot); |
| mCore->clearBufferSlotLocked(*outSlot); |
| BQ_LOGE("dequeueBuffer: createGraphicBuffer failed"); |
| return error; |
| } |
| |
| if (mCore->mIsAbandoned) { |
| mCore->mFreeSlots.insert(*outSlot); |
| mCore->clearBufferSlotLocked(*outSlot); |
| BQ_LOGE("dequeueBuffer: BufferQueue has been abandoned"); |
| return NO_INIT; |
| } |
| |
| VALIDATE_CONSISTENCY(); |
| } // Autolock scope |
| } |
| |
| if (attachedByConsumer) { |
| returnFlags |= BUFFER_NEEDS_REALLOCATION; |
| } |
| |
| if (eglFence != EGL_NO_SYNC_KHR) { |
| EGLint result = eglClientWaitSyncKHR(eglDisplay, eglFence, 0, |
| 1000000000); |
| // If something goes wrong, log the error, but return the buffer without |
| // synchronizing access to it. It's too late at this point to abort the |
| // dequeue operation. |
| if (result == EGL_FALSE) { |
| BQ_LOGE("dequeueBuffer: error %#x waiting for fence", |
| eglGetError()); |
| } else if (result == EGL_TIMEOUT_EXPIRED_KHR) { |
| BQ_LOGE("dequeueBuffer: timeout waiting for fence"); |
| } |
| eglDestroySyncKHR(eglDisplay, eglFence); |
| } |
| |
| BQ_LOGV("dequeueBuffer: returning slot=%d/%" PRIu64 " buf=%p flags=%#x", |
| *outSlot, |
| mSlots[*outSlot].mFrameNumber, |
| mSlots[*outSlot].mGraphicBuffer->handle, returnFlags); |
| |
| addAndGetFrameTimestamps(nullptr, outTimestamps); |
| |
| return returnFlags; |
| } |
| |
| status_t BufferQueueProducer::detachBuffer(int slot) { |
| ATRACE_CALL(); |
| ATRACE_BUFFER_INDEX(slot); |
| BQ_LOGV("detachBuffer: slot %d", slot); |
| |
| sp<IConsumerListener> listener; |
| { |
| Mutex::Autolock lock(mCore->mMutex); |
| |
| if (mCore->mIsAbandoned) { |
| BQ_LOGE("detachBuffer: BufferQueue has been abandoned"); |
| return NO_INIT; |
| } |
| |
| if (mCore->mConnectedApi == BufferQueueCore::NO_CONNECTED_API) { |
| BQ_LOGE("detachBuffer: BufferQueue has no connected producer"); |
| return NO_INIT; |
| } |
| |
| if (mCore->mSharedBufferMode || mCore->mSharedBufferSlot == slot) { |
| BQ_LOGE("detachBuffer: cannot detach a buffer in shared buffer mode"); |
| return BAD_VALUE; |
| } |
| |
| if (slot < 0 || slot >= BufferQueueDefs::NUM_BUFFER_SLOTS) { |
| BQ_LOGE("detachBuffer: slot index %d out of range [0, %d)", |
| slot, BufferQueueDefs::NUM_BUFFER_SLOTS); |
| return BAD_VALUE; |
| } else if (!mSlots[slot].mBufferState.isDequeued()) { |
| BQ_LOGE("detachBuffer: slot %d is not owned by the producer " |
| "(state = %s)", slot, mSlots[slot].mBufferState.string()); |
| return BAD_VALUE; |
| } else if (!mSlots[slot].mRequestBufferCalled) { |
| BQ_LOGE("detachBuffer: buffer in slot %d has not been requested", |
| slot); |
| return BAD_VALUE; |
| } |
| |
| mSlots[slot].mBufferState.detachProducer(); |
| mCore->mActiveBuffers.erase(slot); |
| mCore->mFreeSlots.insert(slot); |
| mCore->clearBufferSlotLocked(slot); |
| mCore->mDequeueCondition.broadcast(); |
| VALIDATE_CONSISTENCY(); |
| listener = mCore->mConsumerListener; |
| } |
| |
| if (listener != NULL) { |
| listener->onBuffersReleased(); |
| } |
| |
| return NO_ERROR; |
| } |
| |
| status_t BufferQueueProducer::detachNextBuffer(sp<GraphicBuffer>* outBuffer, |
| sp<Fence>* outFence) { |
| ATRACE_CALL(); |
| |
| if (outBuffer == NULL) { |
| BQ_LOGE("detachNextBuffer: outBuffer must not be NULL"); |
| return BAD_VALUE; |
| } else if (outFence == NULL) { |
| BQ_LOGE("detachNextBuffer: outFence must not be NULL"); |
| return BAD_VALUE; |
| } |
| |
| Mutex::Autolock lock(mCore->mMutex); |
| |
| if (mCore->mIsAbandoned) { |
| BQ_LOGE("detachNextBuffer: BufferQueue has been abandoned"); |
| return NO_INIT; |
| } |
| |
| if (mCore->mConnectedApi == BufferQueueCore::NO_CONNECTED_API) { |
| BQ_LOGE("detachNextBuffer: BufferQueue has no connected producer"); |
| return NO_INIT; |
| } |
| |
| if (mCore->mSharedBufferMode) { |
| BQ_LOGE("detachNextBuffer: cannot detach a buffer in shared buffer " |
| "mode"); |
| return BAD_VALUE; |
| } |
| |
| mCore->waitWhileAllocatingLocked(); |
| |
| if (mCore->mFreeBuffers.empty()) { |
| return NO_MEMORY; |
| } |
| |
| int found = mCore->mFreeBuffers.front(); |
| mCore->mFreeBuffers.remove(found); |
| mCore->mFreeSlots.insert(found); |
| |
| BQ_LOGV("detachNextBuffer detached slot %d", found); |
| |
| *outBuffer = mSlots[found].mGraphicBuffer; |
| *outFence = mSlots[found].mFence; |
| mCore->clearBufferSlotLocked(found); |
| VALIDATE_CONSISTENCY(); |
| |
| return NO_ERROR; |
| } |
| |
| status_t BufferQueueProducer::attachBuffer(int* outSlot, |
| const sp<android::GraphicBuffer>& buffer) { |
| ATRACE_CALL(); |
| |
| if (outSlot == NULL) { |
| BQ_LOGE("attachBuffer: outSlot must not be NULL"); |
| return BAD_VALUE; |
| } else if (buffer == NULL) { |
| BQ_LOGE("attachBuffer: cannot attach NULL buffer"); |
| return BAD_VALUE; |
| } |
| |
| Mutex::Autolock lock(mCore->mMutex); |
| |
| if (mCore->mIsAbandoned) { |
| BQ_LOGE("attachBuffer: BufferQueue has been abandoned"); |
| return NO_INIT; |
| } |
| |
| if (mCore->mConnectedApi == BufferQueueCore::NO_CONNECTED_API) { |
| BQ_LOGE("attachBuffer: BufferQueue has no connected producer"); |
| return NO_INIT; |
| } |
| |
| if (mCore->mSharedBufferMode) { |
| BQ_LOGE("attachBuffer: cannot attach a buffer in shared buffer mode"); |
| return BAD_VALUE; |
| } |
| |
| if (buffer->getGenerationNumber() != mCore->mGenerationNumber) { |
| BQ_LOGE("attachBuffer: generation number mismatch [buffer %u] " |
| "[queue %u]", buffer->getGenerationNumber(), |
| mCore->mGenerationNumber); |
| return BAD_VALUE; |
| } |
| |
| mCore->waitWhileAllocatingLocked(); |
| |
| status_t returnFlags = NO_ERROR; |
| int found; |
| status_t status = waitForFreeSlotThenRelock(FreeSlotCaller::Attach, &found); |
| if (status != NO_ERROR) { |
| return status; |
| } |
| |
| // This should not happen |
| if (found == BufferQueueCore::INVALID_BUFFER_SLOT) { |
| BQ_LOGE("attachBuffer: no available buffer slots"); |
| return -EBUSY; |
| } |
| |
| *outSlot = found; |
| ATRACE_BUFFER_INDEX(*outSlot); |
| BQ_LOGV("attachBuffer: returning slot %d flags=%#x", |
| *outSlot, returnFlags); |
| |
| mSlots[*outSlot].mGraphicBuffer = buffer; |
| mSlots[*outSlot].mBufferState.attachProducer(); |
| mSlots[*outSlot].mEglFence = EGL_NO_SYNC_KHR; |
| mSlots[*outSlot].mFence = Fence::NO_FENCE; |
| mSlots[*outSlot].mRequestBufferCalled = true; |
| mSlots[*outSlot].mAcquireCalled = false; |
| mSlots[*outSlot].mNeedsReallocation = false; |
| mCore->mActiveBuffers.insert(found); |
| VALIDATE_CONSISTENCY(); |
| |
| return returnFlags; |
| } |
| |
| status_t BufferQueueProducer::queueBuffer(int slot, |
| const QueueBufferInput &input, QueueBufferOutput *output) { |
| ATRACE_CALL(); |
| ATRACE_BUFFER_INDEX(slot); |
| |
| int64_t requestedPresentTimestamp; |
| bool isAutoTimestamp; |
| android_dataspace dataSpace; |
| Rect crop(Rect::EMPTY_RECT); |
| int scalingMode; |
| uint32_t transform; |
| uint32_t stickyTransform; |
| sp<Fence> acquireFence; |
| bool getFrameTimestamps = false; |
| input.deflate(&requestedPresentTimestamp, &isAutoTimestamp, &dataSpace, |
| &crop, &scalingMode, &transform, &acquireFence, &stickyTransform, |
| &getFrameTimestamps); |
| Region surfaceDamage = input.getSurfaceDamage(); |
| |
| if (acquireFence == NULL) { |
| BQ_LOGE("queueBuffer: fence is NULL"); |
| return BAD_VALUE; |
| } |
| |
| auto acquireFenceTime = std::make_shared<FenceTime>(acquireFence); |
| |
| switch (scalingMode) { |
| case NATIVE_WINDOW_SCALING_MODE_FREEZE: |
| case NATIVE_WINDOW_SCALING_MODE_SCALE_TO_WINDOW: |
| case NATIVE_WINDOW_SCALING_MODE_SCALE_CROP: |
| case NATIVE_WINDOW_SCALING_MODE_NO_SCALE_CROP: |
| break; |
| default: |
| BQ_LOGE("queueBuffer: unknown scaling mode %d", scalingMode); |
| return BAD_VALUE; |
| } |
| |
| sp<IConsumerListener> frameAvailableListener; |
| sp<IConsumerListener> frameReplacedListener; |
| int callbackTicket = 0; |
| uint64_t currentFrameNumber = 0; |
| BufferItem item; |
| { // Autolock scope |
| Mutex::Autolock lock(mCore->mMutex); |
| |
| if (mCore->mIsAbandoned) { |
| BQ_LOGE("queueBuffer: BufferQueue has been abandoned"); |
| return NO_INIT; |
| } |
| |
| if (mCore->mConnectedApi == BufferQueueCore::NO_CONNECTED_API) { |
| BQ_LOGE("queueBuffer: BufferQueue has no connected producer"); |
| return NO_INIT; |
| } |
| |
| if (slot < 0 || slot >= BufferQueueDefs::NUM_BUFFER_SLOTS) { |
| BQ_LOGE("queueBuffer: slot index %d out of range [0, %d)", |
| slot, BufferQueueDefs::NUM_BUFFER_SLOTS); |
| return BAD_VALUE; |
| } else if (!mSlots[slot].mBufferState.isDequeued()) { |
| BQ_LOGE("queueBuffer: slot %d is not owned by the producer " |
| "(state = %s)", slot, mSlots[slot].mBufferState.string()); |
| return BAD_VALUE; |
| } else if (!mSlots[slot].mRequestBufferCalled) { |
| BQ_LOGE("queueBuffer: slot %d was queued without requesting " |
| "a buffer", slot); |
| return BAD_VALUE; |
| } |
| |
| // If shared buffer mode has just been enabled, cache the slot of the |
| // first buffer that is queued and mark it as the shared buffer. |
| if (mCore->mSharedBufferMode && mCore->mSharedBufferSlot == |
| BufferQueueCore::INVALID_BUFFER_SLOT) { |
| mCore->mSharedBufferSlot = slot; |
| mSlots[slot].mBufferState.mShared = true; |
| } |
| |
| BQ_LOGV("queueBuffer: slot=%d/%" PRIu64 " time=%" PRIu64 " dataSpace=%d" |
| " crop=[%d,%d,%d,%d] transform=%#x scale=%s", |
| slot, mCore->mFrameCounter + 1, requestedPresentTimestamp, |
| dataSpace, crop.left, crop.top, crop.right, crop.bottom, |
| transform, |
| BufferItem::scalingModeName(static_cast<uint32_t>(scalingMode))); |
| |
| const sp<GraphicBuffer>& graphicBuffer(mSlots[slot].mGraphicBuffer); |
| Rect bufferRect(graphicBuffer->getWidth(), graphicBuffer->getHeight()); |
| Rect croppedRect(Rect::EMPTY_RECT); |
| crop.intersect(bufferRect, &croppedRect); |
| if (croppedRect != crop) { |
| BQ_LOGE("queueBuffer: crop rect is not contained within the " |
| "buffer in slot %d", slot); |
| return BAD_VALUE; |
| } |
| |
| // Override UNKNOWN dataspace with consumer default |
| if (dataSpace == HAL_DATASPACE_UNKNOWN) { |
| dataSpace = mCore->mDefaultBufferDataSpace; |
| } |
| |
| mSlots[slot].mFence = acquireFence; |
| mSlots[slot].mBufferState.queue(); |
| |
| // Increment the frame counter and store a local version of it |
| // for use outside the lock on mCore->mMutex. |
| ++mCore->mFrameCounter; |
| currentFrameNumber = mCore->mFrameCounter; |
| mSlots[slot].mFrameNumber = currentFrameNumber; |
| |
| item.mAcquireCalled = mSlots[slot].mAcquireCalled; |
| item.mGraphicBuffer = mSlots[slot].mGraphicBuffer; |
| item.mCrop = crop; |
| item.mTransform = transform & |
| ~static_cast<uint32_t>(NATIVE_WINDOW_TRANSFORM_INVERSE_DISPLAY); |
| item.mTransformToDisplayInverse = |
| (transform & NATIVE_WINDOW_TRANSFORM_INVERSE_DISPLAY) != 0; |
| item.mScalingMode = static_cast<uint32_t>(scalingMode); |
| item.mTimestamp = requestedPresentTimestamp; |
| item.mIsAutoTimestamp = isAutoTimestamp; |
| item.mDataSpace = dataSpace; |
| item.mFrameNumber = currentFrameNumber; |
| item.mSlot = slot; |
| item.mFence = acquireFence; |
| item.mFenceTime = acquireFenceTime; |
| item.mIsDroppable = mCore->mAsyncMode || |
| mCore->mDequeueBufferCannotBlock || |
| (mCore->mSharedBufferMode && mCore->mSharedBufferSlot == slot); |
| item.mSurfaceDamage = surfaceDamage; |
| item.mQueuedBuffer = true; |
| item.mAutoRefresh = mCore->mSharedBufferMode && mCore->mAutoRefresh; |
| |
| mStickyTransform = stickyTransform; |
| |
| // Cache the shared buffer data so that the BufferItem can be recreated. |
| if (mCore->mSharedBufferMode) { |
| mCore->mSharedBufferCache.crop = crop; |
| mCore->mSharedBufferCache.transform = transform; |
| mCore->mSharedBufferCache.scalingMode = static_cast<uint32_t>( |
| scalingMode); |
| mCore->mSharedBufferCache.dataspace = dataSpace; |
| } |
| |
| output->bufferReplaced = false; |
| if (mCore->mQueue.empty()) { |
| // When the queue is empty, we can ignore mDequeueBufferCannotBlock |
| // and simply queue this buffer |
| mCore->mQueue.push_back(item); |
| frameAvailableListener = mCore->mConsumerListener; |
| } else { |
| // When the queue is not empty, we need to look at the last buffer |
| // in the queue to see if we need to replace it |
| const BufferItem& last = mCore->mQueue.itemAt( |
| mCore->mQueue.size() - 1); |
| if (last.mIsDroppable) { |
| |
| if (!last.mIsStale) { |
| mSlots[last.mSlot].mBufferState.freeQueued(); |
| |
| // After leaving shared buffer mode, the shared buffer will |
| // still be around. Mark it as no longer shared if this |
| // operation causes it to be free. |
| if (!mCore->mSharedBufferMode && |
| mSlots[last.mSlot].mBufferState.isFree()) { |
| mSlots[last.mSlot].mBufferState.mShared = false; |
| } |
| // Don't put the shared buffer on the free list. |
| if (!mSlots[last.mSlot].mBufferState.isShared()) { |
| mCore->mActiveBuffers.erase(last.mSlot); |
| mCore->mFreeBuffers.push_back(last.mSlot); |
| output->bufferReplaced = true; |
| } |
| } |
| |
| // Overwrite the droppable buffer with the incoming one |
| mCore->mQueue.editItemAt(mCore->mQueue.size() - 1) = item; |
| frameReplacedListener = mCore->mConsumerListener; |
| } else { |
| mCore->mQueue.push_back(item); |
| frameAvailableListener = mCore->mConsumerListener; |
| } |
| } |
| |
| mCore->mBufferHasBeenQueued = true; |
| mCore->mDequeueCondition.broadcast(); |
| mCore->mLastQueuedSlot = slot; |
| |
| output->width = mCore->mDefaultWidth; |
| output->height = mCore->mDefaultHeight; |
| output->transformHint = mCore->mTransformHint; |
| output->numPendingBuffers = static_cast<uint32_t>(mCore->mQueue.size()); |
| output->nextFrameNumber = mCore->mFrameCounter + 1; |
| |
| ATRACE_INT(mCore->mConsumerName.string(), |
| static_cast<int32_t>(mCore->mQueue.size())); |
| mCore->mOccupancyTracker.registerOccupancyChange(mCore->mQueue.size()); |
| |
| // Take a ticket for the callback functions |
| callbackTicket = mNextCallbackTicket++; |
| |
| VALIDATE_CONSISTENCY(); |
| } // Autolock scope |
| |
| // It is okay not to clear the GraphicBuffer when the consumer is SurfaceFlinger because |
| // it is guaranteed that the BufferQueue is inside SurfaceFlinger's process and |
| // there will be no Binder call |
| if (!mConsumerIsSurfaceFlinger) { |
| item.mGraphicBuffer.clear(); |
| } |
| |
| // Don't send the slot number through the callback since the consumer shouldn't need it |
| item.mSlot = BufferItem::INVALID_BUFFER_SLOT; |
| |
| // Call back without the main BufferQueue lock held, but with the callback |
| // lock held so we can ensure that callbacks occur in order |
| |
| int connectedApi; |
| sp<Fence> lastQueuedFence; |
| |
| { // scope for the lock |
| Mutex::Autolock lock(mCallbackMutex); |
| while (callbackTicket != mCurrentCallbackTicket) { |
| mCallbackCondition.wait(mCallbackMutex); |
| } |
| |
| if (frameAvailableListener != NULL) { |
| frameAvailableListener->onFrameAvailable(item); |
| } else if (frameReplacedListener != NULL) { |
| frameReplacedListener->onFrameReplaced(item); |
| } |
| |
| connectedApi = mCore->mConnectedApi; |
| lastQueuedFence = std::move(mLastQueueBufferFence); |
| |
| mLastQueueBufferFence = std::move(acquireFence); |
| mLastQueuedCrop = item.mCrop; |
| mLastQueuedTransform = item.mTransform; |
| |
| ++mCurrentCallbackTicket; |
| mCallbackCondition.broadcast(); |
| } |
| |
| // Wait without lock held |
| if (connectedApi == NATIVE_WINDOW_API_EGL) { |
| // Waiting here allows for two full buffers to be queued but not a |
| // third. In the event that frames take varying time, this makes a |
| // small trade-off in favor of latency rather than throughput. |
| lastQueuedFence->waitForever("Throttling EGL Production"); |
| } |
| |
| // Update and get FrameEventHistory. |
| nsecs_t postedTime = systemTime(SYSTEM_TIME_MONOTONIC); |
| NewFrameEventsEntry newFrameEventsEntry = { |
| currentFrameNumber, |
| postedTime, |
| requestedPresentTimestamp, |
| std::move(acquireFenceTime) |
| }; |
| addAndGetFrameTimestamps(&newFrameEventsEntry, |
| getFrameTimestamps ? &output->frameTimestamps : nullptr); |
| |
| return NO_ERROR; |
| } |
| |
| status_t BufferQueueProducer::cancelBuffer(int slot, const sp<Fence>& fence) { |
| ATRACE_CALL(); |
| BQ_LOGV("cancelBuffer: slot %d", slot); |
| Mutex::Autolock lock(mCore->mMutex); |
| |
| if (mCore->mIsAbandoned) { |
| BQ_LOGE("cancelBuffer: BufferQueue has been abandoned"); |
| return NO_INIT; |
| } |
| |
| if (mCore->mConnectedApi == BufferQueueCore::NO_CONNECTED_API) { |
| BQ_LOGE("cancelBuffer: BufferQueue has no connected producer"); |
| return NO_INIT; |
| } |
| |
| if (mCore->mSharedBufferMode) { |
| BQ_LOGE("cancelBuffer: cannot cancel a buffer in shared buffer mode"); |
| return BAD_VALUE; |
| } |
| |
| if (slot < 0 || slot >= BufferQueueDefs::NUM_BUFFER_SLOTS) { |
| BQ_LOGE("cancelBuffer: slot index %d out of range [0, %d)", |
| slot, BufferQueueDefs::NUM_BUFFER_SLOTS); |
| return BAD_VALUE; |
| } else if (!mSlots[slot].mBufferState.isDequeued()) { |
| BQ_LOGE("cancelBuffer: slot %d is not owned by the producer " |
| "(state = %s)", slot, mSlots[slot].mBufferState.string()); |
| return BAD_VALUE; |
| } else if (fence == NULL) { |
| BQ_LOGE("cancelBuffer: fence is NULL"); |
| return BAD_VALUE; |
| } |
| |
| mSlots[slot].mBufferState.cancel(); |
| |
| // After leaving shared buffer mode, the shared buffer will still be around. |
| // Mark it as no longer shared if this operation causes it to be free. |
| if (!mCore->mSharedBufferMode && mSlots[slot].mBufferState.isFree()) { |
| mSlots[slot].mBufferState.mShared = false; |
| } |
| |
| // Don't put the shared buffer on the free list. |
| if (!mSlots[slot].mBufferState.isShared()) { |
| mCore->mActiveBuffers.erase(slot); |
| mCore->mFreeBuffers.push_back(slot); |
| } |
| |
| mSlots[slot].mFence = fence; |
| mCore->mDequeueCondition.broadcast(); |
| VALIDATE_CONSISTENCY(); |
| |
| return NO_ERROR; |
| } |
| |
| int BufferQueueProducer::query(int what, int *outValue) { |
| ATRACE_CALL(); |
| Mutex::Autolock lock(mCore->mMutex); |
| |
| if (outValue == NULL) { |
| BQ_LOGE("query: outValue was NULL"); |
| return BAD_VALUE; |
| } |
| |
| if (mCore->mIsAbandoned) { |
| BQ_LOGE("query: BufferQueue has been abandoned"); |
| return NO_INIT; |
| } |
| |
| int value; |
| switch (what) { |
| case NATIVE_WINDOW_WIDTH: |
| value = static_cast<int32_t>(mCore->mDefaultWidth); |
| break; |
| case NATIVE_WINDOW_HEIGHT: |
| value = static_cast<int32_t>(mCore->mDefaultHeight); |
| break; |
| case NATIVE_WINDOW_FORMAT: |
| value = static_cast<int32_t>(mCore->mDefaultBufferFormat); |
| break; |
| case NATIVE_WINDOW_LAYER_COUNT: |
| // All BufferQueue buffers have a single layer. |
| value = BQ_LAYER_COUNT; |
| break; |
| case NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS: |
| value = mCore->getMinUndequeuedBufferCountLocked(); |
| break; |
| case NATIVE_WINDOW_STICKY_TRANSFORM: |
| value = static_cast<int32_t>(mStickyTransform); |
| break; |
| case NATIVE_WINDOW_CONSUMER_RUNNING_BEHIND: |
| value = (mCore->mQueue.size() > 1); |
| break; |
| case NATIVE_WINDOW_CONSUMER_USAGE_BITS: |
| value = static_cast<int32_t>(mCore->mConsumerUsageBits); |
| break; |
| case NATIVE_WINDOW_DEFAULT_DATASPACE: |
| value = static_cast<int32_t>(mCore->mDefaultBufferDataSpace); |
| break; |
| case NATIVE_WINDOW_BUFFER_AGE: |
| if (mCore->mBufferAge > INT32_MAX) { |
| value = 0; |
| } else { |
| value = static_cast<int32_t>(mCore->mBufferAge); |
| } |
| break; |
| default: |
| return BAD_VALUE; |
| } |
| |
| BQ_LOGV("query: %d? %d", what, value); |
| *outValue = value; |
| return NO_ERROR; |
| } |
| |
| status_t BufferQueueProducer::connect(const sp<IProducerListener>& listener, |
| int api, bool producerControlledByApp, QueueBufferOutput *output) { |
| ATRACE_CALL(); |
| Mutex::Autolock lock(mCore->mMutex); |
| mConsumerName = mCore->mConsumerName; |
| BQ_LOGV("connect: api=%d producerControlledByApp=%s", api, |
| producerControlledByApp ? "true" : "false"); |
| |
| if (mCore->mIsAbandoned) { |
| BQ_LOGE("connect: BufferQueue has been abandoned"); |
| return NO_INIT; |
| } |
| |
| if (mCore->mConsumerListener == NULL) { |
| BQ_LOGE("connect: BufferQueue has no consumer"); |
| return NO_INIT; |
| } |
| |
| if (output == NULL) { |
| BQ_LOGE("connect: output was NULL"); |
| return BAD_VALUE; |
| } |
| |
| if (mCore->mConnectedApi != BufferQueueCore::NO_CONNECTED_API) { |
| BQ_LOGE("connect: already connected (cur=%d req=%d)", |
| mCore->mConnectedApi, api); |
| return BAD_VALUE; |
| } |
| |
| int delta = mCore->getMaxBufferCountLocked(mCore->mAsyncMode, |
| mDequeueTimeout < 0 ? |
| mCore->mConsumerControlledByApp && producerControlledByApp : false, |
| mCore->mMaxBufferCount) - |
| mCore->getMaxBufferCountLocked(); |
| if (!mCore->adjustAvailableSlotsLocked(delta)) { |
| BQ_LOGE("connect: BufferQueue failed to adjust the number of available " |
| "slots. Delta = %d", delta); |
| return BAD_VALUE; |
| } |
| |
| int status = NO_ERROR; |
| switch (api) { |
| case NATIVE_WINDOW_API_EGL: |
| case NATIVE_WINDOW_API_CPU: |
| case NATIVE_WINDOW_API_MEDIA: |
| case NATIVE_WINDOW_API_CAMERA: |
| mCore->mConnectedApi = api; |
| |
| output->width = mCore->mDefaultWidth; |
| output->height = mCore->mDefaultHeight; |
| output->transformHint = mCore->mTransformHint; |
| output->numPendingBuffers = |
| static_cast<uint32_t>(mCore->mQueue.size()); |
| output->nextFrameNumber = mCore->mFrameCounter + 1; |
| output->bufferReplaced = false; |
| |
| if (listener != NULL) { |
| // Set up a death notification so that we can disconnect |
| // automatically if the remote producer dies |
| if (IInterface::asBinder(listener)->remoteBinder() != NULL) { |
| status = IInterface::asBinder(listener)->linkToDeath( |
| static_cast<IBinder::DeathRecipient*>(this)); |
| if (status != NO_ERROR) { |
| BQ_LOGE("connect: linkToDeath failed: %s (%d)", |
| strerror(-status), status); |
| } |
| mCore->mLinkedToDeath = listener; |
| } |
| if (listener->needsReleaseNotify()) { |
| mCore->mConnectedProducerListener = listener; |
| } |
| } |
| break; |
| default: |
| BQ_LOGE("connect: unknown API %d", api); |
| status = BAD_VALUE; |
| break; |
| } |
| mCore->mConnectedPid = IPCThreadState::self()->getCallingPid(); |
| mCore->mBufferHasBeenQueued = false; |
| mCore->mDequeueBufferCannotBlock = false; |
| if (mDequeueTimeout < 0) { |
| mCore->mDequeueBufferCannotBlock = |
| mCore->mConsumerControlledByApp && producerControlledByApp; |
| } |
| |
| mCore->mAllowAllocation = true; |
| VALIDATE_CONSISTENCY(); |
| return status; |
| } |
| |
| status_t BufferQueueProducer::disconnect(int api, DisconnectMode mode) { |
| ATRACE_CALL(); |
| BQ_LOGV("disconnect: api %d", api); |
| |
| int status = NO_ERROR; |
| sp<IConsumerListener> listener; |
| { // Autolock scope |
| Mutex::Autolock lock(mCore->mMutex); |
| |
| if (mode == DisconnectMode::AllLocal) { |
| if (IPCThreadState::self()->getCallingPid() != mCore->mConnectedPid) { |
| return NO_ERROR; |
| } |
| api = BufferQueueCore::CURRENTLY_CONNECTED_API; |
| } |
| |
| mCore->waitWhileAllocatingLocked(); |
| |
| if (mCore->mIsAbandoned) { |
| // It's not really an error to disconnect after the surface has |
| // been abandoned; it should just be a no-op. |
| return NO_ERROR; |
| } |
| |
| if (api == BufferQueueCore::CURRENTLY_CONNECTED_API) { |
| if (mCore->mConnectedApi == NATIVE_WINDOW_API_MEDIA) { |
| ALOGD("About to force-disconnect API_MEDIA, mode=%d", mode); |
| } |
| api = mCore->mConnectedApi; |
| // If we're asked to disconnect the currently connected api but |
| // nobody is connected, it's not really an error. |
| if (api == BufferQueueCore::NO_CONNECTED_API) { |
| return NO_ERROR; |
| } |
| } |
| |
| switch (api) { |
| case NATIVE_WINDOW_API_EGL: |
| case NATIVE_WINDOW_API_CPU: |
| case NATIVE_WINDOW_API_MEDIA: |
| case NATIVE_WINDOW_API_CAMERA: |
| if (mCore->mConnectedApi == api) { |
| mCore->freeAllBuffersLocked(); |
| |
| // Remove our death notification callback if we have one |
| if (mCore->mLinkedToDeath != NULL) { |
| sp<IBinder> token = |
| IInterface::asBinder(mCore->mLinkedToDeath); |
| // This can fail if we're here because of the death |
| // notification, but we just ignore it |
| token->unlinkToDeath( |
| static_cast<IBinder::DeathRecipient*>(this)); |
| } |
| mCore->mSharedBufferSlot = |
| BufferQueueCore::INVALID_BUFFER_SLOT; |
| mCore->mLinkedToDeath = NULL; |
| mCore->mConnectedProducerListener = NULL; |
| mCore->mConnectedApi = BufferQueueCore::NO_CONNECTED_API; |
| mCore->mConnectedPid = -1; |
| mCore->mSidebandStream.clear(); |
| mCore->mDequeueCondition.broadcast(); |
| listener = mCore->mConsumerListener; |
| } else if (mCore->mConnectedApi == BufferQueueCore::NO_CONNECTED_API) { |
| BQ_LOGE("disconnect: not connected (req=%d)", api); |
| status = NO_INIT; |
| } else { |
| BQ_LOGE("disconnect: still connected to another API " |
| "(cur=%d req=%d)", mCore->mConnectedApi, api); |
| status = BAD_VALUE; |
| } |
| break; |
| default: |
| BQ_LOGE("disconnect: unknown API %d", api); |
| status = BAD_VALUE; |
| break; |
| } |
| } // Autolock scope |
| |
| // Call back without lock held |
| if (listener != NULL) { |
| listener->onBuffersReleased(); |
| listener->onDisconnect(); |
| } |
| |
| return status; |
| } |
| |
| status_t BufferQueueProducer::setSidebandStream(const sp<NativeHandle>& stream) { |
| sp<IConsumerListener> listener; |
| { // Autolock scope |
| Mutex::Autolock _l(mCore->mMutex); |
| mCore->mSidebandStream = stream; |
| listener = mCore->mConsumerListener; |
| } // Autolock scope |
| |
| if (listener != NULL) { |
| listener->onSidebandStreamChanged(); |
| } |
| return NO_ERROR; |
| } |
| |
| void BufferQueueProducer::allocateBuffers(uint32_t width, uint32_t height, |
| PixelFormat format, uint32_t usage) { |
| ATRACE_CALL(); |
| while (true) { |
| size_t newBufferCount = 0; |
| uint32_t allocWidth = 0; |
| uint32_t allocHeight = 0; |
| PixelFormat allocFormat = PIXEL_FORMAT_UNKNOWN; |
| uint32_t allocUsage = 0; |
| { // Autolock scope |
| Mutex::Autolock lock(mCore->mMutex); |
| mCore->waitWhileAllocatingLocked(); |
| |
| if (!mCore->mAllowAllocation) { |
| BQ_LOGE("allocateBuffers: allocation is not allowed for this " |
| "BufferQueue"); |
| return; |
| } |
| |
| newBufferCount = mCore->mFreeSlots.size(); |
| if (newBufferCount == 0) { |
| return; |
| } |
| |
| allocWidth = width > 0 ? width : mCore->mDefaultWidth; |
| allocHeight = height > 0 ? height : mCore->mDefaultHeight; |
| allocFormat = format != 0 ? format : mCore->mDefaultBufferFormat; |
| allocUsage = usage | mCore->mConsumerUsageBits; |
| |
| mCore->mIsAllocating = true; |
| } // Autolock scope |
| |
| Vector<sp<GraphicBuffer>> buffers; |
| for (size_t i = 0; i < newBufferCount; ++i) { |
| sp<GraphicBuffer> graphicBuffer = new GraphicBuffer( |
| allocWidth, allocHeight, allocFormat, BQ_LAYER_COUNT, |
| allocUsage, {mConsumerName.string(), mConsumerName.size()}); |
| |
| status_t result = graphicBuffer->initCheck(); |
| |
| if (result != NO_ERROR) { |
| BQ_LOGE("allocateBuffers: failed to allocate buffer (%u x %u, format" |
| " %u, usage %u)", width, height, format, usage); |
| Mutex::Autolock lock(mCore->mMutex); |
| mCore->mIsAllocating = false; |
| mCore->mIsAllocatingCondition.broadcast(); |
| return; |
| } |
| buffers.push_back(graphicBuffer); |
| } |
| |
| { // Autolock scope |
| Mutex::Autolock lock(mCore->mMutex); |
| uint32_t checkWidth = width > 0 ? width : mCore->mDefaultWidth; |
| uint32_t checkHeight = height > 0 ? height : mCore->mDefaultHeight; |
| PixelFormat checkFormat = format != 0 ? |
| format : mCore->mDefaultBufferFormat; |
| uint32_t checkUsage = usage | mCore->mConsumerUsageBits; |
| if (checkWidth != allocWidth || checkHeight != allocHeight || |
| checkFormat != allocFormat || checkUsage != allocUsage) { |
| // Something changed while we released the lock. Retry. |
| BQ_LOGV("allocateBuffers: size/format/usage changed while allocating. Retrying."); |
| mCore->mIsAllocating = false; |
| mCore->mIsAllocatingCondition.broadcast(); |
| continue; |
| } |
| |
| for (size_t i = 0; i < newBufferCount; ++i) { |
| if (mCore->mFreeSlots.empty()) { |
| BQ_LOGV("allocateBuffers: a slot was occupied while " |
| "allocating. Dropping allocated buffer."); |
| continue; |
| } |
| auto slot = mCore->mFreeSlots.begin(); |
| mCore->clearBufferSlotLocked(*slot); // Clean up the slot first |
| mSlots[*slot].mGraphicBuffer = buffers[i]; |
| mSlots[*slot].mFence = Fence::NO_FENCE; |
| |
| // freeBufferLocked puts this slot on the free slots list. Since |
| // we then attached a buffer, move the slot to free buffer list. |
| mCore->mFreeBuffers.push_front(*slot); |
| |
| BQ_LOGV("allocateBuffers: allocated a new buffer in slot %d", |
| *slot); |
| |
| // Make sure the erase is done after all uses of the slot |
| // iterator since it will be invalid after this point. |
| mCore->mFreeSlots.erase(slot); |
| } |
| |
| mCore->mIsAllocating = false; |
| mCore->mIsAllocatingCondition.broadcast(); |
| VALIDATE_CONSISTENCY(); |
| } // Autolock scope |
| } |
| } |
| |
| status_t BufferQueueProducer::allowAllocation(bool allow) { |
| ATRACE_CALL(); |
| BQ_LOGV("allowAllocation: %s", allow ? "true" : "false"); |
| |
| Mutex::Autolock lock(mCore->mMutex); |
| mCore->mAllowAllocation = allow; |
| return NO_ERROR; |
| } |
| |
| status_t BufferQueueProducer::setGenerationNumber(uint32_t generationNumber) { |
| ATRACE_CALL(); |
| BQ_LOGV("setGenerationNumber: %u", generationNumber); |
| |
| Mutex::Autolock lock(mCore->mMutex); |
| mCore->mGenerationNumber = generationNumber; |
| return NO_ERROR; |
| } |
| |
| String8 BufferQueueProducer::getConsumerName() const { |
| ATRACE_CALL(); |
| Mutex::Autolock lock(mCore->mMutex); |
| BQ_LOGV("getConsumerName: %s", mConsumerName.string()); |
| return mConsumerName; |
| } |
| |
| status_t BufferQueueProducer::setSharedBufferMode(bool sharedBufferMode) { |
| ATRACE_CALL(); |
| BQ_LOGV("setSharedBufferMode: %d", sharedBufferMode); |
| |
| Mutex::Autolock lock(mCore->mMutex); |
| if (!sharedBufferMode) { |
| mCore->mSharedBufferSlot = BufferQueueCore::INVALID_BUFFER_SLOT; |
| } |
| mCore->mSharedBufferMode = sharedBufferMode; |
| return NO_ERROR; |
| } |
| |
| status_t BufferQueueProducer::setAutoRefresh(bool autoRefresh) { |
| ATRACE_CALL(); |
| BQ_LOGV("setAutoRefresh: %d", autoRefresh); |
| |
| Mutex::Autolock lock(mCore->mMutex); |
| |
| mCore->mAutoRefresh = autoRefresh; |
| return NO_ERROR; |
| } |
| |
| status_t BufferQueueProducer::setDequeueTimeout(nsecs_t timeout) { |
| ATRACE_CALL(); |
| BQ_LOGV("setDequeueTimeout: %" PRId64, timeout); |
| |
| Mutex::Autolock lock(mCore->mMutex); |
| int delta = mCore->getMaxBufferCountLocked(mCore->mAsyncMode, false, |
| mCore->mMaxBufferCount) - mCore->getMaxBufferCountLocked(); |
| if (!mCore->adjustAvailableSlotsLocked(delta)) { |
| BQ_LOGE("setDequeueTimeout: BufferQueue failed to adjust the number of " |
| "available slots. Delta = %d", delta); |
| return BAD_VALUE; |
| } |
| |
| mDequeueTimeout = timeout; |
| mCore->mDequeueBufferCannotBlock = false; |
| |
| VALIDATE_CONSISTENCY(); |
| return NO_ERROR; |
| } |
| |
| status_t BufferQueueProducer::getLastQueuedBuffer(sp<GraphicBuffer>* outBuffer, |
| sp<Fence>* outFence, float outTransformMatrix[16]) { |
| ATRACE_CALL(); |
| BQ_LOGV("getLastQueuedBuffer"); |
| |
| Mutex::Autolock lock(mCore->mMutex); |
| if (mCore->mLastQueuedSlot == BufferItem::INVALID_BUFFER_SLOT) { |
| *outBuffer = nullptr; |
| *outFence = Fence::NO_FENCE; |
| return NO_ERROR; |
| } |
| |
| *outBuffer = mSlots[mCore->mLastQueuedSlot].mGraphicBuffer; |
| *outFence = mLastQueueBufferFence; |
| |
| // Currently only SurfaceFlinger internally ever changes |
| // GLConsumer's filtering mode, so we just use 'true' here as |
| // this is slightly specialized for the current client of this API, |
| // which does want filtering. |
| GLConsumer::computeTransformMatrix(outTransformMatrix, |
| mSlots[mCore->mLastQueuedSlot].mGraphicBuffer, mLastQueuedCrop, |
| mLastQueuedTransform, true /* filter */); |
| |
| return NO_ERROR; |
| } |
| |
| void BufferQueueProducer::getFrameTimestamps(FrameEventHistoryDelta* outDelta) { |
| addAndGetFrameTimestamps(nullptr, outDelta); |
| } |
| |
| void BufferQueueProducer::addAndGetFrameTimestamps( |
| const NewFrameEventsEntry* newTimestamps, |
| FrameEventHistoryDelta* outDelta) { |
| if (newTimestamps == nullptr && outDelta == nullptr) { |
| return; |
| } |
| |
| ATRACE_CALL(); |
| BQ_LOGV("addAndGetFrameTimestamps"); |
| sp<IConsumerListener> listener; |
| { |
| Mutex::Autolock lock(mCore->mMutex); |
| listener = mCore->mConsumerListener; |
| } |
| if (listener != NULL) { |
| listener->addAndGetFrameTimestamps(newTimestamps, outDelta); |
| } |
| } |
| |
| void BufferQueueProducer::binderDied(const wp<android::IBinder>& /* who */) { |
| // If we're here, it means that a producer we were connected to died. |
| // We're guaranteed that we are still connected to it because we remove |
| // this callback upon disconnect. It's therefore safe to read mConnectedApi |
| // without synchronization here. |
| int api = mCore->mConnectedApi; |
| disconnect(api); |
| } |
| |
| status_t BufferQueueProducer::getUniqueId(uint64_t* outId) const { |
| BQ_LOGV("getUniqueId"); |
| |
| *outId = mCore->mUniqueId; |
| return NO_ERROR; |
| } |
| |
| } // namespace android |