blob: a1bd960c5a601488eee264856c8c6c5055b9d28b [file] [log] [blame]
Johan Euphrosine5388c522015-05-21 01:15:34 -07001# Doxyfile 1.8.3.1
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8# TAG = value [value, ...]
9# For lists items can also be appended using:
10# TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
Quddus Chong4fe1ead2017-02-22 15:19:35 -080017# This tag specifies the encoding used for all characters in the config file
18# that follow. The default is UTF-8 which is also the encoding used for all
19# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20# iconv built into libc) for the transcoding. See
Johan Euphrosine5388c522015-05-21 01:15:34 -070021# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23DOXYFILE_ENCODING = UTF-8
24
Quddus Chong4fe1ead2017-02-22 15:19:35 -080025# The PROJECT_NAME tag is a single word (or sequence of words) that should
26# identify the project. Note that if you do not use Doxywizard you need
Johan Euphrosine5388c522015-05-21 01:15:34 -070027# to put quotes around the project name if it contains spaces.
28
29PROJECT_NAME = "NDK API"
30
Quddus Chong4fe1ead2017-02-22 15:19:35 -080031# The PROJECT_NUMBER tag can be used to enter a project or revision number.
32# This could be handy for archiving the generated documentation or
Johan Euphrosine5388c522015-05-21 01:15:34 -070033# if some version control system is used.
34
Quddus Chong4fe1ead2017-02-22 15:19:35 -080035PROJECT_NUMBER =
Johan Euphrosine5388c522015-05-21 01:15:34 -070036
Quddus Chong4fe1ead2017-02-22 15:19:35 -080037# Using the PROJECT_BRIEF tag one can provide an optional one line description
38# for a project that appears at the top of each page and should give viewer
Johan Euphrosine5388c522015-05-21 01:15:34 -070039# a quick idea about the purpose of the project. Keep the description short.
40
41PROJECT_BRIEF = ""
42
Quddus Chong4fe1ead2017-02-22 15:19:35 -080043# With the PROJECT_LOGO tag one can specify an logo or icon that is
44# included in the documentation. The maximum height of the logo should not
45# exceed 55 pixels and the maximum width should not exceed 200 pixels.
Johan Euphrosine5388c522015-05-21 01:15:34 -070046# Doxygen will copy the logo to the output directory.
47
48PROJECT_LOGO = logo.png
49
Quddus Chong4fe1ead2017-02-22 15:19:35 -080050# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
51# base path where the generated documentation will be put.
52# If a relative path is entered, it will be relative to the location
Johan Euphrosine5388c522015-05-21 01:15:34 -070053# where doxygen was started. If left blank the current directory will be used.
54
Quddus Chong4fe1ead2017-02-22 15:19:35 -080055OUTPUT_DIRECTORY =
Johan Euphrosine5388c522015-05-21 01:15:34 -070056
Quddus Chong4fe1ead2017-02-22 15:19:35 -080057# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
58# 4096 sub-directories (in 2 levels) under the output directory of each output
59# format and will distribute the generated files over these directories.
60# Enabling this option can be useful when feeding doxygen a huge amount of
61# source files, where putting all generated files in the same directory would
Johan Euphrosine5388c522015-05-21 01:15:34 -070062# otherwise cause performance problems for the file system.
63
64CREATE_SUBDIRS = NO
65
Quddus Chong4fe1ead2017-02-22 15:19:35 -080066# The OUTPUT_LANGUAGE tag is used to specify the language in which all
67# documentation generated by doxygen is written. Doxygen will use this
68# information to generate all constant output in the proper language.
69# The default language is English, other supported languages are:
70# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
71# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
72# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
73# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
74# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
Johan Euphrosine5388c522015-05-21 01:15:34 -070075# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
76
77OUTPUT_LANGUAGE = English
78
Quddus Chong4fe1ead2017-02-22 15:19:35 -080079# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
80# include brief member descriptions after the members that are listed in
81# the file and class documentation (similar to JavaDoc).
Johan Euphrosine5388c522015-05-21 01:15:34 -070082# Set to NO to disable this.
83
84BRIEF_MEMBER_DESC = YES
85
Quddus Chong4fe1ead2017-02-22 15:19:35 -080086# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
87# the brief description of a member or function before the detailed description.
88# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
Johan Euphrosine5388c522015-05-21 01:15:34 -070089# brief descriptions will be completely suppressed.
90
91REPEAT_BRIEF = YES
92
Quddus Chong4fe1ead2017-02-22 15:19:35 -080093# This tag implements a quasi-intelligent brief description abbreviator
94# that is used to form the text in various listings. Each string
95# in this list, if found as the leading text of the brief description, will be
96# stripped from the text and the result after processing the whole list, is
97# used as the annotated text. Otherwise, the brief description is used as-is.
98# If left blank, the following values are used ("$name" is automatically
99# replaced with the name of the entity): "The $name class" "The $name widget"
100# "The $name file" "is" "provides" "specifies" "contains"
Johan Euphrosine5388c522015-05-21 01:15:34 -0700101# "represents" "a" "an" "the"
102
103ABBREVIATE_BRIEF = "The $name class" \
104 "The $name widget" \
105 "The $name file" \
106 is \
107 provides \
108 specifies \
109 contains \
110 represents \
111 a \
112 an \
113 the
114
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800115# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
116# Doxygen will generate a detailed section even if there is only a brief
Johan Euphrosine5388c522015-05-21 01:15:34 -0700117# description.
118
119ALWAYS_DETAILED_SEC = NO
120
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800121# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
122# inherited members of a class in the documentation of that class as if those
123# members were ordinary class members. Constructors, destructors and assignment
Johan Euphrosine5388c522015-05-21 01:15:34 -0700124# operators of the base classes will not be shown.
125
126INLINE_INHERITED_MEMB = NO
127
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800128# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
129# path before files name in the file list and in the header files. If set
Johan Euphrosine5388c522015-05-21 01:15:34 -0700130# to NO the shortest path that makes the file name unique will be used.
131
132FULL_PATH_NAMES = NO
133
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800134# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
135# can be used to strip a user-defined part of the path. Stripping is
136# only done if one of the specified strings matches the left-hand part of
137# the path. The tag can be used to show relative paths in the file list.
138# If left blank the directory from which doxygen is run is used as the
139# path to strip. Note that you specify absolute paths here, but also
140# relative paths, which will be relative from the directory where doxygen is
Johan Euphrosine5388c522015-05-21 01:15:34 -0700141# started.
142
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800143STRIP_FROM_PATH =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700144
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800145# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
146# the path mentioned in the documentation of a class, which tells
147# the reader which header file to include in order to use a class.
148# If left blank only the name of the header file containing the class
149# definition is used. Otherwise one should specify the include paths that
Johan Euphrosine5388c522015-05-21 01:15:34 -0700150# are normally passed to the compiler using the -I flag.
151
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800152STRIP_FROM_INC_PATH =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700153
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800154# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
155# (but less readable) file names. This can be useful if your file system
Johan Euphrosine5388c522015-05-21 01:15:34 -0700156# doesn't support long names like on DOS, Mac, or CD-ROM.
157
158SHORT_NAMES = NO
159
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800160# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
161# will interpret the first line (until the first dot) of a JavaDoc-style
162# comment as the brief description. If set to NO, the JavaDoc
163# comments will behave just like regular Qt-style comments
Johan Euphrosine5388c522015-05-21 01:15:34 -0700164# (thus requiring an explicit @brief command for a brief description.)
165
166JAVADOC_AUTOBRIEF = NO
167
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800168# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
169# interpret the first line (until the first dot) of a Qt-style
170# comment as the brief description. If set to NO, the comments
171# will behave just like regular Qt-style comments (thus requiring
Johan Euphrosine5388c522015-05-21 01:15:34 -0700172# an explicit \brief command for a brief description.)
173
174QT_AUTOBRIEF = NO
175
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800176# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
177# treat a multi-line C++ special comment block (i.e. a block of //! or ///
178# comments) as a brief description. This used to be the default behaviour.
179# The new default is to treat a multi-line C++ comment block as a detailed
Johan Euphrosine5388c522015-05-21 01:15:34 -0700180# description. Set this tag to YES if you prefer the old behaviour instead.
181
182MULTILINE_CPP_IS_BRIEF = NO
183
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800184# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
185# member inherits the documentation from any documented member that it
Johan Euphrosine5388c522015-05-21 01:15:34 -0700186# re-implements.
187
188INHERIT_DOCS = YES
189
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800190# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
191# a new page for each member. If set to NO, the documentation of a member will
Johan Euphrosine5388c522015-05-21 01:15:34 -0700192# be part of the file/class/namespace that contains it.
193
194SEPARATE_MEMBER_PAGES = NO
195
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800196# The TAB_SIZE tag can be used to set the number of spaces in a tab.
Johan Euphrosine5388c522015-05-21 01:15:34 -0700197# Doxygen uses this value to replace tabs by spaces in code fragments.
198
199TAB_SIZE = 4
200
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800201# This tag can be used to specify a number of aliases that acts
202# as commands in the documentation. An alias has the form "name=value".
203# For example adding "sideeffect=\par Side Effects:\n" will allow you to
204# put the command \sideeffect (or @sideeffect) in the documentation, which
205# will result in a user-defined paragraph with heading "Side Effects:".
Johan Euphrosine5388c522015-05-21 01:15:34 -0700206# You can put \n's in the value part of an alias to insert newlines.
207
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800208ALIASES =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700209
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800210# This tag can be used to specify a number of word-keyword mappings (TCL only).
211# A mapping has the form "name=value". For example adding
212# "class=itcl::class" will allow you to use the command class in the
Johan Euphrosine5388c522015-05-21 01:15:34 -0700213# itcl::class meaning.
214
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800215TCL_SUBST =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700216
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800217# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
218# sources only. Doxygen will then generate output that is more tailored for C.
219# For instance, some of the names that are used will be different. The list
Johan Euphrosine5388c522015-05-21 01:15:34 -0700220# of all members will be omitted, etc.
221
222OPTIMIZE_OUTPUT_FOR_C = YES
223
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800224# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
225# sources only. Doxygen will then generate output that is more tailored for
226# Java. For instance, namespaces will be presented as packages, qualified
Johan Euphrosine5388c522015-05-21 01:15:34 -0700227# scopes will look different, etc.
228
229OPTIMIZE_OUTPUT_JAVA = NO
230
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800231# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
232# sources only. Doxygen will then generate output that is more tailored for
Johan Euphrosine5388c522015-05-21 01:15:34 -0700233# Fortran.
234
235OPTIMIZE_FOR_FORTRAN = NO
236
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800237# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
238# sources. Doxygen will then generate output that is tailored for
Johan Euphrosine5388c522015-05-21 01:15:34 -0700239# VHDL.
240
241OPTIMIZE_OUTPUT_VHDL = NO
242
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800243# Doxygen selects the parser to use depending on the extension of the files it
244# parses. With this tag you can assign which parser to use for a given
245# extension. Doxygen has a built-in mapping, but you can override or extend it
246# using this tag. The format is ext=language, where ext is a file extension,
247# and language is one of the parsers supported by doxygen: IDL, Java,
248# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C,
249# C++. For instance to make doxygen treat .inc files as Fortran files (default
250# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note
251# that for custom extensions you also need to set FILE_PATTERNS otherwise the
Johan Euphrosine5388c522015-05-21 01:15:34 -0700252# files are not read by doxygen.
253
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800254EXTENSION_MAPPING =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700255
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800256# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
257# comments according to the Markdown format, which allows for more readable
258# documentation. See http://daringfireball.net/projects/markdown/ for details.
259# The output of markdown processing is further processed by doxygen, so you
260# can mix doxygen, HTML, and XML commands with Markdown formatting.
Johan Euphrosine5388c522015-05-21 01:15:34 -0700261# Disable only in case of backward compatibilities issues.
262
263MARKDOWN_SUPPORT = YES
264
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800265# When enabled doxygen tries to link words that correspond to documented classes,
266# or namespaces to their corresponding documentation. Such a link can be
267# prevented in individual cases by by putting a % sign in front of the word or
Johan Euphrosine5388c522015-05-21 01:15:34 -0700268# globally by setting AUTOLINK_SUPPORT to NO.
269
270AUTOLINK_SUPPORT = YES
271
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800272# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
273# to include (a tag file for) the STL sources as input, then you should
274# set this tag to YES in order to let doxygen match functions declarations and
275# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
276# func(std::string) {}). This also makes the inheritance and collaboration
Johan Euphrosine5388c522015-05-21 01:15:34 -0700277# diagrams that involve STL classes more complete and accurate.
278
279BUILTIN_STL_SUPPORT = NO
280
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800281# If you use Microsoft's C++/CLI language, you should set this option to YES to
Johan Euphrosine5388c522015-05-21 01:15:34 -0700282# enable parsing support.
283
284CPP_CLI_SUPPORT = NO
285
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800286# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
287# Doxygen will parse them like normal C++ but will assume all classes use public
Johan Euphrosine5388c522015-05-21 01:15:34 -0700288# instead of private inheritance when no explicit protection keyword is present.
289
290SIP_SUPPORT = NO
291
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800292# For Microsoft's IDL there are propget and propput attributes to indicate
293# getter and setter methods for a property. Setting this option to YES (the
294# default) will make doxygen replace the get and set methods by a property in
295# the documentation. This will only work if the methods are indeed getting or
296# setting a simple type. If this is not the case, or you want to show the
Johan Euphrosine5388c522015-05-21 01:15:34 -0700297# methods anyway, you should set this option to NO.
298
299IDL_PROPERTY_SUPPORT = YES
300
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800301# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
302# tag is set to YES, then doxygen will reuse the documentation of the first
303# member in the group (if any) for the other members of the group. By default
Johan Euphrosine5388c522015-05-21 01:15:34 -0700304# all members of a group must be documented explicitly.
305
306DISTRIBUTE_GROUP_DOC = NO
307
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800308# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
309# the same type (for instance a group of public functions) to be put as a
310# subgroup of that type (e.g. under the Public Functions section). Set it to
311# NO to prevent subgrouping. Alternatively, this can be done per class using
Johan Euphrosine5388c522015-05-21 01:15:34 -0700312# the \nosubgrouping command.
313
314SUBGROUPING = YES
315
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800316# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
317# unions are shown inside the group in which they are included (e.g. using
318# @ingroup) instead of on a separate page (for HTML and Man pages) or
Johan Euphrosine5388c522015-05-21 01:15:34 -0700319# section (for LaTeX and RTF).
320
321INLINE_GROUPED_CLASSES = NO
322
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800323# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
324# unions with only public data fields will be shown inline in the documentation
325# of the scope in which they are defined (i.e. file, namespace, or group
326# documentation), provided this scope is documented. If set to NO (the default),
327# structs, classes, and unions are shown on a separate page (for HTML and Man
Johan Euphrosine5388c522015-05-21 01:15:34 -0700328# pages) or section (for LaTeX and RTF).
329
330INLINE_SIMPLE_STRUCTS = NO
331
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800332# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
333# is documented as struct, union, or enum with the name of the typedef. So
334# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
335# with name TypeT. When disabled the typedef will appear as a member of a file,
336# namespace, or class. And the struct will be named TypeS. This can typically
337# be useful for C code in case the coding convention dictates that all compound
Johan Euphrosine5388c522015-05-21 01:15:34 -0700338# types are typedef'ed and only the typedef is referenced, never the tag name.
339
340TYPEDEF_HIDES_STRUCT = NO
341
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800342# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
343# determine which symbols to keep in memory and which to flush to disk.
344# When the cache is full, less often used symbols will be written to disk.
345# For small to medium size projects (<1000 input files) the default value is
346# probably good enough. For larger projects a too small cache size can cause
347# doxygen to be busy swapping symbols to and from disk most of the time
348# causing a significant performance penalty.
349# If the system has enough physical memory increasing the cache will improve the
350# performance by keeping more symbols in memory. Note that the value works on
351# a logarithmic scale so increasing the size by one will roughly double the
352# memory usage. The cache size is given by this formula:
353# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
Johan Euphrosine5388c522015-05-21 01:15:34 -0700354# corresponding to a cache size of 2^16 = 65536 symbols.
355
356SYMBOL_CACHE_SIZE = 0
357
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800358# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
359# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
360# their name and scope. Since this can be an expensive process and often the
361# same symbol appear multiple times in the code, doxygen keeps a cache of
362# pre-resolved symbols. If the cache is too small doxygen will become slower.
363# If the cache is too large, memory is wasted. The cache size is given by this
364# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
Johan Euphrosine5388c522015-05-21 01:15:34 -0700365# corresponding to a cache size of 2^16 = 65536 symbols.
366
367LOOKUP_CACHE_SIZE = 0
368
369#---------------------------------------------------------------------------
370# Build related configuration options
371#---------------------------------------------------------------------------
372
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800373# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
374# documentation are documented, even if no documentation was available.
375# Private class members and static file members will be hidden unless
Johan Euphrosine5388c522015-05-21 01:15:34 -0700376# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
377
378EXTRACT_ALL = YES
379
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800380# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
Johan Euphrosine5388c522015-05-21 01:15:34 -0700381# will be included in the documentation.
382
383EXTRACT_PRIVATE = NO
384
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800385# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
Johan Euphrosine5388c522015-05-21 01:15:34 -0700386# scope will be included in the documentation.
387
388EXTRACT_PACKAGE = NO
389
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800390# If the EXTRACT_STATIC tag is set to YES all static members of a file
Johan Euphrosine5388c522015-05-21 01:15:34 -0700391# will be included in the documentation.
392
393EXTRACT_STATIC = NO
394
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800395# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
396# defined locally in source files will be included in the documentation.
Johan Euphrosine5388c522015-05-21 01:15:34 -0700397# If set to NO only classes defined in header files are included.
398
399EXTRACT_LOCAL_CLASSES = YES
400
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800401# This flag is only useful for Objective-C code. When set to YES local
402# methods, which are defined in the implementation section but not in
403# the interface are included in the documentation.
Johan Euphrosine5388c522015-05-21 01:15:34 -0700404# If set to NO (the default) only methods in the interface are included.
405
406EXTRACT_LOCAL_METHODS = NO
407
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800408# If this flag is set to YES, the members of anonymous namespaces will be
409# extracted and appear in the documentation as a namespace called
410# 'anonymous_namespace{file}', where file will be replaced with the base
411# name of the file that contains the anonymous namespace. By default
Johan Euphrosine5388c522015-05-21 01:15:34 -0700412# anonymous namespaces are hidden.
413
414EXTRACT_ANON_NSPACES = NO
415
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800416# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
417# undocumented members of documented classes, files or namespaces.
418# If set to NO (the default) these members will be included in the
419# various overviews, but no documentation section is generated.
Johan Euphrosine5388c522015-05-21 01:15:34 -0700420# This option has no effect if EXTRACT_ALL is enabled.
421
422HIDE_UNDOC_MEMBERS = NO
423
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800424# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
425# undocumented classes that are normally visible in the class hierarchy.
426# If set to NO (the default) these classes will be included in the various
Johan Euphrosine5388c522015-05-21 01:15:34 -0700427# overviews. This option has no effect if EXTRACT_ALL is enabled.
428
429HIDE_UNDOC_CLASSES = NO
430
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800431# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
432# friend (class|struct|union) declarations.
433# If set to NO (the default) these declarations will be included in the
Johan Euphrosine5388c522015-05-21 01:15:34 -0700434# documentation.
435
436HIDE_FRIEND_COMPOUNDS = NO
437
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800438# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
439# documentation blocks found inside the body of a function.
440# If set to NO (the default) these blocks will be appended to the
Johan Euphrosine5388c522015-05-21 01:15:34 -0700441# function's detailed documentation block.
442
443HIDE_IN_BODY_DOCS = NO
444
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800445# The INTERNAL_DOCS tag determines if documentation
446# that is typed after a \internal command is included. If the tag is set
447# to NO (the default) then the documentation will be excluded.
Johan Euphrosine5388c522015-05-21 01:15:34 -0700448# Set it to YES to include the internal documentation.
449
450INTERNAL_DOCS = NO
451
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800452# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
453# file names in lower-case letters. If set to YES upper-case letters are also
454# allowed. This is useful if you have classes or files whose names only differ
455# in case and if your file system supports case sensitive file names. Windows
Johan Euphrosine5388c522015-05-21 01:15:34 -0700456# and Mac users are advised to set this option to NO.
457
458CASE_SENSE_NAMES = NO
459
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800460# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
461# will show members with their full class and namespace scopes in the
Johan Euphrosine5388c522015-05-21 01:15:34 -0700462# documentation. If set to YES the scope will be hidden.
463
464HIDE_SCOPE_NAMES = YES
465
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800466# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
467# will put a list of the files that are included by a file in the documentation
Johan Euphrosine5388c522015-05-21 01:15:34 -0700468# of that file.
469
470SHOW_INCLUDE_FILES = YES
471
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800472# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
473# will list include files with double quotes in the documentation
Johan Euphrosine5388c522015-05-21 01:15:34 -0700474# rather than with sharp brackets.
475
476FORCE_LOCAL_INCLUDES = NO
477
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800478# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
Johan Euphrosine5388c522015-05-21 01:15:34 -0700479# is inserted in the documentation for inline members.
480
481INLINE_INFO = YES
482
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800483# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
484# will sort the (detailed) documentation of file and class members
485# alphabetically by member name. If set to NO the members will appear in
Johan Euphrosine5388c522015-05-21 01:15:34 -0700486# declaration order.
487
488SORT_MEMBER_DOCS = YES
489
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800490# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
491# brief documentation of file, namespace and class members alphabetically
492# by member name. If set to NO (the default) the members will appear in
Johan Euphrosine5388c522015-05-21 01:15:34 -0700493# declaration order.
494
495SORT_BRIEF_DOCS = NO
496
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800497# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
498# will sort the (brief and detailed) documentation of class members so that
499# constructors and destructors are listed first. If set to NO (the default)
500# the constructors will appear in the respective orders defined by
501# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
502# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
Johan Euphrosine5388c522015-05-21 01:15:34 -0700503# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
504
505SORT_MEMBERS_CTORS_1ST = NO
506
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800507# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
508# hierarchy of group names into alphabetical order. If set to NO (the default)
Johan Euphrosine5388c522015-05-21 01:15:34 -0700509# the group names will appear in their defined order.
510
511SORT_GROUP_NAMES = NO
512
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800513# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
514# sorted by fully-qualified names, including namespaces. If set to
515# NO (the default), the class list will be sorted only by class name,
516# not including the namespace part.
517# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
518# Note: This option applies only to the class list, not to the
Johan Euphrosine5388c522015-05-21 01:15:34 -0700519# alphabetical list.
520
521SORT_BY_SCOPE_NAME = NO
522
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800523# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
524# do proper type resolution of all parameters of a function it will reject a
525# match between the prototype and the implementation of a member function even
526# if there is only one candidate or it is obvious which candidate to choose
527# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
Johan Euphrosine5388c522015-05-21 01:15:34 -0700528# will still accept a match between prototype and implementation in such cases.
529
530STRICT_PROTO_MATCHING = NO
531
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800532# The GENERATE_TODOLIST tag can be used to enable (YES) or
533# disable (NO) the todo list. This list is created by putting \todo
Johan Euphrosine5388c522015-05-21 01:15:34 -0700534# commands in the documentation.
535
536GENERATE_TODOLIST = YES
537
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800538# The GENERATE_TESTLIST tag can be used to enable (YES) or
539# disable (NO) the test list. This list is created by putting \test
Johan Euphrosine5388c522015-05-21 01:15:34 -0700540# commands in the documentation.
541
542GENERATE_TESTLIST = YES
543
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800544# The GENERATE_BUGLIST tag can be used to enable (YES) or
545# disable (NO) the bug list. This list is created by putting \bug
Johan Euphrosine5388c522015-05-21 01:15:34 -0700546# commands in the documentation.
547
548GENERATE_BUGLIST = YES
549
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800550# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
551# disable (NO) the deprecated list. This list is created by putting
Johan Euphrosine5388c522015-05-21 01:15:34 -0700552# \deprecated commands in the documentation.
553
554GENERATE_DEPRECATEDLIST= YES
555
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800556# The ENABLED_SECTIONS tag can be used to enable conditional
557# documentation sections, marked by \if section-label ... \endif
Johan Euphrosine5388c522015-05-21 01:15:34 -0700558# and \cond section-label ... \endcond blocks.
559
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800560ENABLED_SECTIONS =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700561
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800562# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
563# the initial value of a variable or macro consists of for it to appear in
564# the documentation. If the initializer consists of more lines than specified
565# here it will be hidden. Use a value of 0 to hide initializers completely.
566# The appearance of the initializer of individual variables and macros in the
567# documentation can be controlled using \showinitializer or \hideinitializer
Johan Euphrosine5388c522015-05-21 01:15:34 -0700568# command in the documentation regardless of this setting.
569
570MAX_INITIALIZER_LINES = 26
571
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800572# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
573# at the bottom of the documentation of classes and structs. If set to YES the
Johan Euphrosine5388c522015-05-21 01:15:34 -0700574# list will mention the files that were used to generate the documentation.
575
576SHOW_USED_FILES = YES
577
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800578# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
579# This will remove the Files entry from the Quick Index and from the
Johan Euphrosine5388c522015-05-21 01:15:34 -0700580# Folder Tree View (if specified). The default is YES.
581
582SHOW_FILES = YES
583
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800584# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
585# Namespaces page. This will remove the Namespaces entry from the Quick Index
Johan Euphrosine5388c522015-05-21 01:15:34 -0700586# and from the Folder Tree View (if specified). The default is YES.
587
588SHOW_NAMESPACES = YES
589
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800590# The FILE_VERSION_FILTER tag can be used to specify a program or script that
591# doxygen should invoke to get the current version for each file (typically from
592# the version control system). Doxygen will invoke the program by executing (via
593# popen()) the command <command> <input-file>, where <command> is the value of
594# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
595# provided by doxygen. Whatever the program writes to standard output
Johan Euphrosine5388c522015-05-21 01:15:34 -0700596# is used as the file version. See the manual for examples.
597
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800598FILE_VERSION_FILTER =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700599
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800600# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
601# by doxygen. The layout file controls the global structure of the generated
602# output files in an output format independent way. To create the layout file
603# that represents doxygen's defaults, run doxygen with the -l option.
604# You can optionally specify a file name after the option, if omitted
Johan Euphrosine5388c522015-05-21 01:15:34 -0700605# DoxygenLayout.xml will be used as the name of the layout file.
606
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800607LAYOUT_FILE =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700608
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800609# The CITE_BIB_FILES tag can be used to specify one or more bib files
610# containing the references data. This must be a list of .bib files. The
611# .bib extension is automatically appended if omitted. Using this command
612# requires the bibtex tool to be installed. See also
613# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
614# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
615# feature you need bibtex and perl available in the search path. Do not use
Johan Euphrosine5388c522015-05-21 01:15:34 -0700616# file names with spaces, bibtex cannot handle them.
617
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800618CITE_BIB_FILES =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700619
620#---------------------------------------------------------------------------
621# configuration options related to warning and progress messages
622#---------------------------------------------------------------------------
623
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800624# The QUIET tag can be used to turn on/off the messages that are generated
Johan Euphrosine5388c522015-05-21 01:15:34 -0700625# by doxygen. Possible values are YES and NO. If left blank NO is used.
626
627QUIET = NO
628
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800629# The WARNINGS tag can be used to turn on/off the warning messages that are
630# generated by doxygen. Possible values are YES and NO. If left blank
Johan Euphrosine5388c522015-05-21 01:15:34 -0700631# NO is used.
632
633WARNINGS = YES
634
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800635# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
636# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
Johan Euphrosine5388c522015-05-21 01:15:34 -0700637# automatically be disabled.
638
639WARN_IF_UNDOCUMENTED = YES
640
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800641# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
642# potential errors in the documentation, such as not documenting some
643# parameters in a documented function, or documenting parameters that
Johan Euphrosine5388c522015-05-21 01:15:34 -0700644# don't exist or using markup commands wrongly.
645
646WARN_IF_DOC_ERROR = YES
647
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800648# The WARN_NO_PARAMDOC option can be enabled to get warnings for
649# functions that are documented, but have no documentation for their parameters
650# or return value. If set to NO (the default) doxygen will only warn about
651# wrong or incomplete parameter documentation, but not about the absence of
Johan Euphrosine5388c522015-05-21 01:15:34 -0700652# documentation.
653
654WARN_NO_PARAMDOC = NO
655
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800656# The WARN_FORMAT tag determines the format of the warning messages that
657# doxygen can produce. The string should contain the $file, $line, and $text
658# tags, which will be replaced by the file and line number from which the
659# warning originated and the warning text. Optionally the format may contain
660# $version, which will be replaced by the version of the file (if it could
Johan Euphrosine5388c522015-05-21 01:15:34 -0700661# be obtained via FILE_VERSION_FILTER)
662
663WARN_FORMAT = "$file:$line: $text"
664
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800665# The WARN_LOGFILE tag can be used to specify a file to which warning
666# and error messages should be written. If left blank the output is written
Johan Euphrosine5388c522015-05-21 01:15:34 -0700667# to stderr.
668
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800669WARN_LOGFILE =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700670
671#---------------------------------------------------------------------------
672# configuration options related to the input files
673#---------------------------------------------------------------------------
674
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800675# The INPUT tag can be used to specify the files and/or directories that contain
676# documented source files. You may enter file names like "myfile.cpp" or
677# directories like "/usr/src/myproject". Separate the files or directories
Johan Euphrosine5388c522015-05-21 01:15:34 -0700678# with spaces.
679
Eino-Ville Talvalae86a8cd2017-11-13 14:51:17 -0800680INPUT = ../include/android ../../av/media/ndk/include ../../av/camera/ndk/include
Johan Euphrosine5388c522015-05-21 01:15:34 -0700681
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800682# This tag can be used to specify the character encoding of the source files
683# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
684# also the default input encoding. Doxygen uses libiconv (or the iconv built
685# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
Johan Euphrosine5388c522015-05-21 01:15:34 -0700686# the list of possible encodings.
687
688INPUT_ENCODING = UTF-8
689
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800690# If the value of the INPUT tag contains directories, you can use the
691# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
692# and *.h) to filter out the source-files in the directories. If left
693# blank the following patterns are tested:
694# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
695# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
Johan Euphrosine5388c522015-05-21 01:15:34 -0700696# *.f90 *.f *.for *.vhd *.vhdl
697
698FILE_PATTERNS = *.c \
699 *.cc \
700 *.cxx \
701 *.cpp \
702 *.c++ \
703 *.d \
704 *.java \
705 *.ii \
706 *.ixx \
707 *.ipp \
708 *.i++ \
709 *.inl \
710 *.h \
711 *.hh \
712 *.hxx \
713 *.hpp \
714 *.h++ \
715 *.idl \
716 *.odl \
717 *.cs \
718 *.php \
719 *.php3 \
720 *.inc \
721 *.m \
722 *.markdown \
723 *.md \
724 *.mm \
725 *.dox \
726 *.py \
727 *.f90 \
728 *.f \
729 *.for \
730 *.vhd \
731 *.vhdl
732
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800733# The RECURSIVE tag can be used to turn specify whether or not subdirectories
734# should be searched for input files as well. Possible values are YES and NO.
Johan Euphrosine5388c522015-05-21 01:15:34 -0700735# If left blank NO is used.
736
737RECURSIVE = YES
738
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800739# The EXCLUDE tag can be used to specify files and/or directories that should be
740# excluded from the INPUT source files. This way you can easily exclude a
741# subdirectory from a directory tree whose root is specified with the INPUT tag.
742# Note that relative paths are relative to the directory from which doxygen is
Johan Euphrosine5388c522015-05-21 01:15:34 -0700743# run.
744
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800745EXCLUDE =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700746
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800747# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
748# directories that are symbolic links (a Unix file system feature) are excluded
Johan Euphrosine5388c522015-05-21 01:15:34 -0700749# from the input.
750
751EXCLUDE_SYMLINKS = NO
752
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800753# If the value of the INPUT tag contains directories, you can use the
754# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
755# certain files from those directories. Note that the wildcards are matched
756# against the file with absolute path, so to exclude all test directories
Johan Euphrosine5388c522015-05-21 01:15:34 -0700757# for example use the pattern */test/*
758
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800759EXCLUDE_PATTERNS =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700760
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800761# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
762# (namespaces, classes, functions, etc.) that should be excluded from the
763# output. The symbol name can be a fully qualified name, a word, or if the
764# wildcard * is used, a substring. Examples: ANamespace, AClass,
Johan Euphrosine5388c522015-05-21 01:15:34 -0700765# AClass::ANamespace, ANamespace::*Test
766
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800767EXCLUDE_SYMBOLS =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700768
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800769# The EXAMPLE_PATH tag can be used to specify one or more files or
770# directories that contain example code fragments that are included (see
Johan Euphrosine5388c522015-05-21 01:15:34 -0700771# the \include command).
772
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800773EXAMPLE_PATH =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700774
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800775# If the value of the EXAMPLE_PATH tag contains directories, you can use the
776# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
777# and *.h) to filter out the source-files in the directories. If left
Johan Euphrosine5388c522015-05-21 01:15:34 -0700778# blank all files are included.
779
780EXAMPLE_PATTERNS = *
781
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800782# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
783# searched for input files to be used with the \include or \dontinclude
784# commands irrespective of the value of the RECURSIVE tag.
Johan Euphrosine5388c522015-05-21 01:15:34 -0700785# Possible values are YES and NO. If left blank NO is used.
786
787EXAMPLE_RECURSIVE = NO
788
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800789# The IMAGE_PATH tag can be used to specify one or more files or
790# directories that contain image that are included in the documentation (see
Johan Euphrosine5388c522015-05-21 01:15:34 -0700791# the \image command).
792
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800793IMAGE_PATH =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700794
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800795# The INPUT_FILTER tag can be used to specify a program that doxygen should
796# invoke to filter for each input file. Doxygen will invoke the filter program
797# by executing (via popen()) the command <filter> <input-file>, where <filter>
798# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
799# input file. Doxygen will then use the output that the filter program writes
800# to standard output. If FILTER_PATTERNS is specified, this tag will be
Johan Euphrosine5388c522015-05-21 01:15:34 -0700801# ignored.
802
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800803INPUT_FILTER =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700804
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800805# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
806# basis. Doxygen will compare the file name with each pattern and apply the
807# filter if there is a match. The filters are a list of the form:
808# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
809# info on how filters are used. If FILTER_PATTERNS is empty or if
Johan Euphrosine5388c522015-05-21 01:15:34 -0700810# non of the patterns match the file name, INPUT_FILTER is applied.
811
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800812FILTER_PATTERNS =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700813
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800814# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
815# INPUT_FILTER) will be used to filter the input files when producing source
Johan Euphrosine5388c522015-05-21 01:15:34 -0700816# files to browse (i.e. when SOURCE_BROWSER is set to YES).
817
818FILTER_SOURCE_FILES = NO
819
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800820# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
821# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
822# and it is also possible to disable source filtering for a specific pattern
823# using *.ext= (so without naming a filter). This option only has effect when
Johan Euphrosine5388c522015-05-21 01:15:34 -0700824# FILTER_SOURCE_FILES is enabled.
825
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800826FILTER_SOURCE_PATTERNS =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700827
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800828# If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that
829# is part of the input, its contents will be placed on the main page (index.html).
830# This can be useful if you have a project on for instance GitHub and want reuse
Johan Euphrosine5388c522015-05-21 01:15:34 -0700831# the introduction page also for the doxygen output.
832
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800833USE_MDFILE_AS_MAINPAGE =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700834
835#---------------------------------------------------------------------------
836# configuration options related to source browsing
837#---------------------------------------------------------------------------
838
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800839# If the SOURCE_BROWSER tag is set to YES then a list of source files will
840# be generated. Documented entities will be cross-referenced with these sources.
841# Note: To get rid of all source code in the generated output, make sure also
Johan Euphrosine5388c522015-05-21 01:15:34 -0700842# VERBATIM_HEADERS is set to NO.
843
844SOURCE_BROWSER = NO
845
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800846# Setting the INLINE_SOURCES tag to YES will include the body
Johan Euphrosine5388c522015-05-21 01:15:34 -0700847# of functions and classes directly in the documentation.
848
849INLINE_SOURCES = NO
850
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800851# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
852# doxygen to hide any special comment blocks from generated source code
Johan Euphrosine5388c522015-05-21 01:15:34 -0700853# fragments. Normal C, C++ and Fortran comments will always remain visible.
854
855STRIP_CODE_COMMENTS = NO
856
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800857# If the REFERENCED_BY_RELATION tag is set to YES
858# then for each documented function all documented
Johan Euphrosine5388c522015-05-21 01:15:34 -0700859# functions referencing it will be listed.
860
861REFERENCED_BY_RELATION = NO
862
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800863# If the REFERENCES_RELATION tag is set to YES
864# then for each documented function all documented entities
Johan Euphrosine5388c522015-05-21 01:15:34 -0700865# called/used by that function will be listed.
866
867REFERENCES_RELATION = NO
868
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800869# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
870# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
871# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
Johan Euphrosine5388c522015-05-21 01:15:34 -0700872# link to the source code. Otherwise they will link to the documentation.
873
874REFERENCES_LINK_SOURCE = YES
875
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800876# If the USE_HTAGS tag is set to YES then the references to source code
877# will point to the HTML generated by the htags(1) tool instead of doxygen
878# built-in source browser. The htags tool is part of GNU's global source
879# tagging system (see http://www.gnu.org/software/global/global.html). You
Johan Euphrosine5388c522015-05-21 01:15:34 -0700880# will need version 4.8.6 or higher.
881
882USE_HTAGS = NO
883
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800884# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
885# will generate a verbatim copy of the header file for each class for
Johan Euphrosine5388c522015-05-21 01:15:34 -0700886# which an include is specified. Set to NO to disable this.
887
888VERBATIM_HEADERS = NO
889
890#---------------------------------------------------------------------------
891# configuration options related to the alphabetical class index
892#---------------------------------------------------------------------------
893
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800894# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
895# of all compounds will be generated. Enable this if the project
Johan Euphrosine5388c522015-05-21 01:15:34 -0700896# contains a lot of classes, structs, unions or interfaces.
897
898ALPHABETICAL_INDEX = NO
899
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800900# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
901# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
Johan Euphrosine5388c522015-05-21 01:15:34 -0700902# in which this list will be split (can be a number in the range [1..20])
903
904COLS_IN_ALPHA_INDEX = 5
905
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800906# In case all classes in a project start with a common prefix, all
907# classes will be put under the same header in the alphabetical index.
908# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
Johan Euphrosine5388c522015-05-21 01:15:34 -0700909# should be ignored while generating the index headers.
910
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800911IGNORE_PREFIX =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700912
913#---------------------------------------------------------------------------
914# configuration options related to the HTML output
915#---------------------------------------------------------------------------
916
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800917# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
Johan Euphrosine5388c522015-05-21 01:15:34 -0700918# generate HTML output.
919
920GENERATE_HTML = YES
921
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800922# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
923# If a relative path is entered the value of OUTPUT_DIRECTORY will be
Johan Euphrosine5388c522015-05-21 01:15:34 -0700924# put in front of it. If left blank `html' will be used as the default path.
925
926HTML_OUTPUT = $(HTML_OUTPUT)
927
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800928# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
929# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
Johan Euphrosine5388c522015-05-21 01:15:34 -0700930# doxygen will generate files with .html extension.
931
932HTML_FILE_EXTENSION = .html
933
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800934# The HTML_HEADER tag can be used to specify a personal HTML header for
935# each generated HTML page. If it is left blank doxygen will generate a
936# standard header. Note that when using a custom header you are responsible
937# for the proper inclusion of any scripts and style sheets that doxygen
938# needs, which is dependent on the configuration options used.
939# It is advised to generate a default header using "doxygen -w html
940# header.html footer.html stylesheet.css YourConfigFile" and then modify
941# that header. Note that the header is subject to change so you typically
942# have to redo this when upgrading to a newer version of doxygen or when
Johan Euphrosine5388c522015-05-21 01:15:34 -0700943# changing the value of configuration settings such as GENERATE_TREEVIEW!
944
945HTML_HEADER = $(HTML_HEADER)
946
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800947# The HTML_FOOTER tag can be used to specify a personal HTML footer for
948# each generated HTML page. If it is left blank doxygen will generate a
Johan Euphrosine5388c522015-05-21 01:15:34 -0700949# standard footer.
950
Johan Euphrosineefd6ab32015-05-27 10:13:35 -0700951HTML_FOOTER = $(HTML_FOOTER)
Johan Euphrosine5388c522015-05-21 01:15:34 -0700952
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800953# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
954# style sheet that is used by each HTML page. It can be used to
955# fine-tune the look of the HTML output. If left blank doxygen will
956# generate a default style sheet. Note that it is recommended to use
957# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this
Johan Euphrosine5388c522015-05-21 01:15:34 -0700958# tag will in the future become obsolete.
959
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800960HTML_STYLESHEET =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700961
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800962# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional
963# user-defined cascading style sheet that is included after the standard
964# style sheets created by doxygen. Using this option one can overrule
965# certain style aspects. This is preferred over using HTML_STYLESHEET
966# since it does not replace the standard style sheet and is therefor more
967# robust against future updates. Doxygen will copy the style sheet file to
Johan Euphrosine5388c522015-05-21 01:15:34 -0700968# the output directory.
969
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800970HTML_EXTRA_STYLESHEET =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700971
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800972# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
973# other source files which should be copied to the HTML output directory. Note
974# that these files will be copied to the base HTML output directory. Use the
975# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
976# files. In the HTML_STYLESHEET file, use the file name only. Also note that
Johan Euphrosine5388c522015-05-21 01:15:34 -0700977# the files will be copied as-is; there are no commands or markers available.
978
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800979HTML_EXTRA_FILES =
Johan Euphrosine5388c522015-05-21 01:15:34 -0700980
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800981# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
982# Doxygen will adjust the colors in the style sheet and background images
983# according to this color. Hue is specified as an angle on a colorwheel,
984# see http://en.wikipedia.org/wiki/Hue for more information.
985# For instance the value 0 represents red, 60 is yellow, 120 is green,
986# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
Johan Euphrosine5388c522015-05-21 01:15:34 -0700987# The allowed range is 0 to 359.
988
989HTML_COLORSTYLE_HUE = 220
990
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800991# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
992# the colors in the HTML output. For a value of 0 the output will use
Johan Euphrosine5388c522015-05-21 01:15:34 -0700993# grayscales only. A value of 255 will produce the most vivid colors.
994
995HTML_COLORSTYLE_SAT = 0
996
Quddus Chong4fe1ead2017-02-22 15:19:35 -0800997# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
998# the luminance component of the colors in the HTML output. Values below
999# 100 gradually make the output lighter, whereas values above 100 make
1000# the output darker. The value divided by 100 is the actual gamma applied,
1001# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
Johan Euphrosine5388c522015-05-21 01:15:34 -07001002# and 100 does not change the gamma.
1003
1004HTML_COLORSTYLE_GAMMA = 80
1005
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001006# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
1007# page will contain the date and time when the page was generated. Setting
Johan Euphrosine5388c522015-05-21 01:15:34 -07001008# this to NO can help when comparing the output of multiple runs.
1009
1010HTML_TIMESTAMP = YES
1011
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001012# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
1013# documentation will contain sections that can be hidden and shown after the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001014# page has loaded.
1015
1016HTML_DYNAMIC_SECTIONS = NO
1017
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001018# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
1019# entries shown in the various tree structured indices initially; the user
1020# can expand and collapse entries dynamically later on. Doxygen will expand
1021# the tree to such a level that at most the specified number of entries are
1022# visible (unless a fully collapsed tree already exceeds this amount).
1023# So setting the number of entries 1 will produce a full collapsed tree by
1024# default. 0 is a special value representing an infinite number of entries
Johan Euphrosine5388c522015-05-21 01:15:34 -07001025# and will result in a full expanded tree by default.
1026
1027HTML_INDEX_NUM_ENTRIES = 100
1028
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001029# If the GENERATE_DOCSET tag is set to YES, additional index files
1030# will be generated that can be used as input for Apple's Xcode 3
1031# integrated development environment, introduced with OSX 10.5 (Leopard).
1032# To create a documentation set, doxygen will generate a Makefile in the
1033# HTML output directory. Running make will produce the docset in that
1034# directory and running "make install" will install the docset in
1035# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
1036# it at startup.
1037# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
Johan Euphrosine5388c522015-05-21 01:15:34 -07001038# for more information.
1039
1040GENERATE_DOCSET = NO
1041
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001042# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
1043# feed. A documentation feed provides an umbrella under which multiple
1044# documentation sets from a single provider (such as a company or product suite)
Johan Euphrosine5388c522015-05-21 01:15:34 -07001045# can be grouped.
1046
1047DOCSET_FEEDNAME = "Doxygen generated docs"
1048
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001049# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
1050# should uniquely identify the documentation set bundle. This should be a
1051# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
Johan Euphrosine5388c522015-05-21 01:15:34 -07001052# will append .docset to the name.
1053
1054DOCSET_BUNDLE_ID = org.doxygen.Project
1055
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001056# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely
1057# identify the documentation publisher. This should be a reverse domain-name
Johan Euphrosine5388c522015-05-21 01:15:34 -07001058# style string, e.g. com.mycompany.MyDocSet.documentation.
1059
1060DOCSET_PUBLISHER_ID = org.doxygen.Publisher
1061
1062# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
1063
1064DOCSET_PUBLISHER_NAME = Publisher
1065
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001066# If the GENERATE_HTMLHELP tag is set to YES, additional index files
1067# will be generated that can be used as input for tools like the
1068# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
Johan Euphrosine5388c522015-05-21 01:15:34 -07001069# of the generated HTML documentation.
1070
1071GENERATE_HTMLHELP = NO
1072
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001073# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
1074# be used to specify the file name of the resulting .chm file. You
1075# can add a path in front of the file if the result should not be
Johan Euphrosine5388c522015-05-21 01:15:34 -07001076# written to the html output directory.
1077
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001078CHM_FILE =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001079
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001080# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
1081# be used to specify the location (absolute path including file name) of
1082# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
Johan Euphrosine5388c522015-05-21 01:15:34 -07001083# the HTML help compiler on the generated index.hhp.
1084
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001085HHC_LOCATION =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001086
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001087# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
1088# controls if a separate .chi index file is generated (YES) or that
Johan Euphrosine5388c522015-05-21 01:15:34 -07001089# it should be included in the master .chm file (NO).
1090
1091GENERATE_CHI = NO
1092
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001093# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
1094# is used to encode HtmlHelp index (hhk), content (hhc) and project file
Johan Euphrosine5388c522015-05-21 01:15:34 -07001095# content.
1096
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001097CHM_INDEX_ENCODING =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001098
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001099# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
1100# controls whether a binary table of contents is generated (YES) or a
Johan Euphrosine5388c522015-05-21 01:15:34 -07001101# normal table of contents (NO) in the .chm file.
1102
1103BINARY_TOC = NO
1104
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001105# The TOC_EXPAND flag can be set to YES to add extra items for group members
Johan Euphrosine5388c522015-05-21 01:15:34 -07001106# to the contents of the HTML help documentation and to the tree view.
1107
1108TOC_EXPAND = NO
1109
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001110# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1111# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
1112# that can be used as input for Qt's qhelpgenerator to generate a
Johan Euphrosine5388c522015-05-21 01:15:34 -07001113# Qt Compressed Help (.qch) of the generated HTML documentation.
1114
1115GENERATE_QHP = NO
1116
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001117# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
1118# be used to specify the file name of the resulting .qch file.
Johan Euphrosine5388c522015-05-21 01:15:34 -07001119# The path specified is relative to the HTML output folder.
1120
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001121QCH_FILE =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001122
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001123# The QHP_NAMESPACE tag specifies the namespace to use when generating
1124# Qt Help Project output. For more information please see
Johan Euphrosine5388c522015-05-21 01:15:34 -07001125# http://doc.trolltech.com/qthelpproject.html#namespace
1126
1127QHP_NAMESPACE = org.doxygen.Project
1128
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001129# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
1130# Qt Help Project output. For more information please see
Johan Euphrosine5388c522015-05-21 01:15:34 -07001131# http://doc.trolltech.com/qthelpproject.html#virtual-folders
1132
1133QHP_VIRTUAL_FOLDER = doc
1134
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001135# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
1136# add. For more information please see
Johan Euphrosine5388c522015-05-21 01:15:34 -07001137# http://doc.trolltech.com/qthelpproject.html#custom-filters
1138
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001139QHP_CUST_FILTER_NAME =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001140
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001141# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
1142# custom filter to add. For more information please see
1143# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
Johan Euphrosine5388c522015-05-21 01:15:34 -07001144# Qt Help Project / Custom Filters</a>.
1145
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001146QHP_CUST_FILTER_ATTRS =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001147
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001148# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1149# project's
1150# filter section matches.
1151# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
Johan Euphrosine5388c522015-05-21 01:15:34 -07001152# Qt Help Project / Filter Attributes</a>.
1153
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001154QHP_SECT_FILTER_ATTRS =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001155
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001156# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
1157# be used to specify the location of Qt's qhelpgenerator.
1158# If non-empty doxygen will try to run qhelpgenerator on the generated
Johan Euphrosine5388c522015-05-21 01:15:34 -07001159# .qhp file.
1160
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001161QHG_LOCATION =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001162
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001163# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
1164# will be generated, which together with the HTML files, form an Eclipse help
1165# plugin. To install this plugin and make it available under the help contents
1166# menu in Eclipse, the contents of the directory containing the HTML and XML
1167# files needs to be copied into the plugins directory of eclipse. The name of
1168# the directory within the plugins directory should be the same as
1169# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
Johan Euphrosine5388c522015-05-21 01:15:34 -07001170# the help appears.
1171
1172GENERATE_ECLIPSEHELP = NO
1173
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001174# A unique identifier for the eclipse help plugin. When installing the plugin
1175# the directory name containing the HTML and XML files should also have
Johan Euphrosine5388c522015-05-21 01:15:34 -07001176# this name.
1177
1178ECLIPSE_DOC_ID = org.doxygen.Project
1179
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001180# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
1181# at top of each HTML page. The value NO (the default) enables the index and
1182# the value YES disables it. Since the tabs have the same information as the
1183# navigation tree you can set this option to NO if you already set
Johan Euphrosine5388c522015-05-21 01:15:34 -07001184# GENERATE_TREEVIEW to YES.
1185
1186DISABLE_INDEX = YES
1187
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001188# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1189# structure should be generated to display hierarchical information.
1190# If the tag value is set to YES, a side panel will be generated
1191# containing a tree-like index structure (just like the one that
1192# is generated for HTML Help). For this to work a browser that supports
1193# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
1194# Windows users are probably better off using the HTML help feature.
1195# Since the tree basically has the same information as the tab index you
Johan Euphrosine5388c522015-05-21 01:15:34 -07001196# could consider to set DISABLE_INDEX to NO when enabling this option.
1197
1198GENERATE_TREEVIEW = NO
1199
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001200# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
1201# (range [0,1..20]) that doxygen will group on one line in the generated HTML
1202# documentation. Note that a value of 0 will completely suppress the enum
Johan Euphrosine5388c522015-05-21 01:15:34 -07001203# values from appearing in the overview section.
1204
1205ENUM_VALUES_PER_LINE = 4
1206
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001207# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
1208# used to set the initial width (in pixels) of the frame in which the tree
Johan Euphrosine5388c522015-05-21 01:15:34 -07001209# is shown.
1210
1211TREEVIEW_WIDTH = 250
1212
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001213# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
Johan Euphrosine5388c522015-05-21 01:15:34 -07001214# links to external symbols imported via tag files in a separate window.
1215
1216EXT_LINKS_IN_WINDOW = NO
1217
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001218# Use this tag to change the font size of Latex formulas included
1219# as images in the HTML documentation. The default is 10. Note that
1220# when you change the font size after a successful doxygen run you need
1221# to manually remove any form_*.png images from the HTML output directory
Johan Euphrosine5388c522015-05-21 01:15:34 -07001222# to force them to be regenerated.
1223
1224FORMULA_FONTSIZE = 10
1225
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001226# Use the FORMULA_TRANPARENT tag to determine whether or not the images
1227# generated for formulas are transparent PNGs. Transparent PNGs are
1228# not supported properly for IE 6.0, but are supported on all modern browsers.
1229# Note that when changing this option you need to delete any form_*.png files
Johan Euphrosine5388c522015-05-21 01:15:34 -07001230# in the HTML output before the changes have effect.
1231
1232FORMULA_TRANSPARENT = YES
1233
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001234# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
1235# (see http://www.mathjax.org) which uses client side Javascript for the
1236# rendering instead of using prerendered bitmaps. Use this if you do not
1237# have LaTeX installed or if you want to formulas look prettier in the HTML
1238# output. When enabled you may also need to install MathJax separately and
Johan Euphrosine5388c522015-05-21 01:15:34 -07001239# configure the path to it using the MATHJAX_RELPATH option.
1240
1241USE_MATHJAX = NO
1242
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001243# When MathJax is enabled you can set the default output format to be used for
1244# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and
1245# SVG. The default value is HTML-CSS, which is slower, but has the best
Johan Euphrosine5388c522015-05-21 01:15:34 -07001246# compatibility.
1247
1248MATHJAX_FORMAT = HTML-CSS
1249
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001250# When MathJax is enabled you need to specify the location relative to the
1251# HTML output directory using the MATHJAX_RELPATH option. The destination
1252# directory should contain the MathJax.js script. For instance, if the mathjax
1253# directory is located at the same level as the HTML output directory, then
1254# MATHJAX_RELPATH should be ../mathjax. The default value points to
1255# the MathJax Content Delivery Network so you can quickly see the result without
1256# installing MathJax. However, it is strongly recommended to install a local
Johan Euphrosine5388c522015-05-21 01:15:34 -07001257# copy of MathJax from http://www.mathjax.org before deployment.
1258
1259MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
1260
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001261# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
Johan Euphrosine5388c522015-05-21 01:15:34 -07001262# names that should be enabled during MathJax rendering.
1263
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001264MATHJAX_EXTENSIONS =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001265
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001266# When the SEARCHENGINE tag is enabled doxygen will generate a search box
1267# for the HTML output. The underlying search engine uses javascript
1268# and DHTML and should work on any modern browser. Note that when using
1269# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
1270# (GENERATE_DOCSET) there is already a search function so this one should
1271# typically be disabled. For large projects the javascript based search engine
Johan Euphrosine5388c522015-05-21 01:15:34 -07001272# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
1273
1274SEARCHENGINE = NO
1275
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001276# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1277# implemented using a web server instead of a web client using Javascript.
1278# There are two flavours of web server based search depending on the
1279# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for
1280# searching and an index file used by the script. When EXTERNAL_SEARCH is
1281# enabled the indexing and searching needs to be provided by external tools.
Johan Euphrosine5388c522015-05-21 01:15:34 -07001282# See the manual for details.
1283
1284SERVER_BASED_SEARCH = NO
1285
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001286# When EXTERNAL_SEARCH is enabled doxygen will no longer generate the PHP
1287# script for searching. Instead the search results are written to an XML file
1288# which needs to be processed by an external indexer. Doxygen will invoke an
1289# external search engine pointed to by the SEARCHENGINE_URL option to obtain
1290# the search results. Doxygen ships with an example indexer (doxyindexer) and
1291# search engine (doxysearch.cgi) which are based on the open source search engine
Johan Euphrosine5388c522015-05-21 01:15:34 -07001292# library Xapian. See the manual for configuration details.
1293
1294EXTERNAL_SEARCH = NO
1295
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001296# The SEARCHENGINE_URL should point to a search engine hosted by a web server
1297# which will returned the search results when EXTERNAL_SEARCH is enabled.
1298# Doxygen ships with an example search engine (doxysearch) which is based on
1299# the open source search engine library Xapian. See the manual for configuration
Johan Euphrosine5388c522015-05-21 01:15:34 -07001300# details.
1301
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001302SEARCHENGINE_URL =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001303
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001304# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
1305# search data is written to a file for indexing by an external tool. With the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001306# SEARCHDATA_FILE tag the name of this file can be specified.
1307
1308SEARCHDATA_FILE = searchdata.xml
1309
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001310# When SERVER_BASED_SEARCH AND EXTERNAL_SEARCH are both enabled the
1311# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
1312# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
Johan Euphrosine5388c522015-05-21 01:15:34 -07001313# projects and redirect the results back to the right project.
1314
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001315EXTERNAL_SEARCH_ID =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001316
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001317# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
1318# projects other than the one defined by this configuration file, but that are
1319# all added to the same external search index. Each project needs to have a
1320# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id
1321# of to a relative location where the documentation can be found.
Johan Euphrosine5388c522015-05-21 01:15:34 -07001322# The format is: EXTRA_SEARCH_MAPPINGS = id1=loc1 id2=loc2 ...
1323
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001324EXTRA_SEARCH_MAPPINGS =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001325
1326#---------------------------------------------------------------------------
1327# configuration options related to the LaTeX output
1328#---------------------------------------------------------------------------
1329
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001330# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
Johan Euphrosine5388c522015-05-21 01:15:34 -07001331# generate Latex output.
1332
1333GENERATE_LATEX = NO
1334
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001335# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1336# If a relative path is entered the value of OUTPUT_DIRECTORY will be
Johan Euphrosine5388c522015-05-21 01:15:34 -07001337# put in front of it. If left blank `latex' will be used as the default path.
1338
1339LATEX_OUTPUT = latex
1340
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001341# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1342# invoked. If left blank `latex' will be used as the default command name.
1343# Note that when enabling USE_PDFLATEX this option is only used for
1344# generating bitmaps for formulas in the HTML output, but not in the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001345# Makefile that is written to the output directory.
1346
1347LATEX_CMD_NAME = latex
1348
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001349# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1350# generate index for LaTeX. If left blank `makeindex' will be used as the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001351# default command name.
1352
1353MAKEINDEX_CMD_NAME = makeindex
1354
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001355# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1356# LaTeX documents. This may be useful for small projects and may help to
Johan Euphrosine5388c522015-05-21 01:15:34 -07001357# save some trees in general.
1358
1359COMPACT_LATEX = NO
1360
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001361# The PAPER_TYPE tag can be used to set the paper type that is used
1362# by the printer. Possible values are: a4, letter, legal and
Johan Euphrosine5388c522015-05-21 01:15:34 -07001363# executive. If left blank a4wide will be used.
1364
1365PAPER_TYPE = a4
1366
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001367# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
Johan Euphrosine5388c522015-05-21 01:15:34 -07001368# packages that should be included in the LaTeX output.
1369
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001370EXTRA_PACKAGES =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001371
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001372# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1373# the generated latex document. The header should contain everything until
1374# the first chapter. If it is left blank doxygen will generate a
Johan Euphrosine5388c522015-05-21 01:15:34 -07001375# standard header. Notice: only use this tag if you know what you are doing!
1376
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001377LATEX_HEADER =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001378
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001379# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
1380# the generated latex document. The footer should contain everything after
1381# the last chapter. If it is left blank doxygen will generate a
Johan Euphrosine5388c522015-05-21 01:15:34 -07001382# standard footer. Notice: only use this tag if you know what you are doing!
1383
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001384LATEX_FOOTER =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001385
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001386# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1387# is prepared for conversion to pdf (using ps2pdf). The pdf file will
1388# contain links (just like the HTML output) instead of page references
Johan Euphrosine5388c522015-05-21 01:15:34 -07001389# This makes the output suitable for online browsing using a pdf viewer.
1390
1391PDF_HYPERLINKS = YES
1392
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001393# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1394# plain latex in the generated Makefile. Set this option to YES to get a
Johan Euphrosine5388c522015-05-21 01:15:34 -07001395# higher quality PDF documentation.
1396
1397USE_PDFLATEX = YES
1398
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001399# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1400# command to the generated LaTeX files. This will instruct LaTeX to keep
1401# running if errors occur, instead of asking the user for help.
Johan Euphrosine5388c522015-05-21 01:15:34 -07001402# This option is also used when generating formulas in HTML.
1403
1404LATEX_BATCHMODE = NO
1405
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001406# If LATEX_HIDE_INDICES is set to YES then doxygen will not
1407# include the index chapters (such as File Index, Compound Index, etc.)
Johan Euphrosine5388c522015-05-21 01:15:34 -07001408# in the output.
1409
1410LATEX_HIDE_INDICES = NO
1411
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001412# If LATEX_SOURCE_CODE is set to YES then doxygen will include
1413# source code with syntax highlighting in the LaTeX output.
1414# Note that which sources are shown also depends on other settings
Johan Euphrosine5388c522015-05-21 01:15:34 -07001415# such as SOURCE_BROWSER.
1416
1417LATEX_SOURCE_CODE = NO
1418
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001419# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
1420# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
Johan Euphrosine5388c522015-05-21 01:15:34 -07001421# http://en.wikipedia.org/wiki/BibTeX for more info.
1422
1423LATEX_BIB_STYLE = plain
1424
1425#---------------------------------------------------------------------------
1426# configuration options related to the RTF output
1427#---------------------------------------------------------------------------
1428
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001429# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1430# The RTF output is optimized for Word 97 and may not look very pretty with
Johan Euphrosine5388c522015-05-21 01:15:34 -07001431# other RTF readers or editors.
1432
1433GENERATE_RTF = NO
1434
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001435# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1436# If a relative path is entered the value of OUTPUT_DIRECTORY will be
Johan Euphrosine5388c522015-05-21 01:15:34 -07001437# put in front of it. If left blank `rtf' will be used as the default path.
1438
1439RTF_OUTPUT = rtf
1440
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001441# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1442# RTF documents. This may be useful for small projects and may help to
Johan Euphrosine5388c522015-05-21 01:15:34 -07001443# save some trees in general.
1444
1445COMPACT_RTF = NO
1446
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001447# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1448# will contain hyperlink fields. The RTF file will
1449# contain links (just like the HTML output) instead of page references.
1450# This makes the output suitable for online browsing using WORD or other
1451# programs which support those fields.
Johan Euphrosine5388c522015-05-21 01:15:34 -07001452# Note: wordpad (write) and others do not support links.
1453
1454RTF_HYPERLINKS = NO
1455
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001456# Load style sheet definitions from file. Syntax is similar to doxygen's
1457# config file, i.e. a series of assignments. You only have to provide
Johan Euphrosine5388c522015-05-21 01:15:34 -07001458# replacements, missing definitions are set to their default value.
1459
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001460RTF_STYLESHEET_FILE =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001461
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001462# Set optional variables used in the generation of an rtf document.
Johan Euphrosine5388c522015-05-21 01:15:34 -07001463# Syntax is similar to doxygen's config file.
1464
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001465RTF_EXTENSIONS_FILE =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001466
1467#---------------------------------------------------------------------------
1468# configuration options related to the man page output
1469#---------------------------------------------------------------------------
1470
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001471# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
Johan Euphrosine5388c522015-05-21 01:15:34 -07001472# generate man pages
1473
1474GENERATE_MAN = NO
1475
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001476# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1477# If a relative path is entered the value of OUTPUT_DIRECTORY will be
Johan Euphrosine5388c522015-05-21 01:15:34 -07001478# put in front of it. If left blank `man' will be used as the default path.
1479
1480MAN_OUTPUT = man
1481
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001482# The MAN_EXTENSION tag determines the extension that is added to
Johan Euphrosine5388c522015-05-21 01:15:34 -07001483# the generated man pages (default is the subroutine's section .3)
1484
1485MAN_EXTENSION = .3
1486
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001487# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1488# then it will generate one additional man file for each entity
1489# documented in the real man page(s). These additional files
1490# only source the real man page, but without them the man command
Johan Euphrosine5388c522015-05-21 01:15:34 -07001491# would be unable to find the correct page. The default is NO.
1492
1493MAN_LINKS = NO
1494
1495#---------------------------------------------------------------------------
1496# configuration options related to the XML output
1497#---------------------------------------------------------------------------
1498
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001499# If the GENERATE_XML tag is set to YES Doxygen will
1500# generate an XML file that captures the structure of
Johan Euphrosine5388c522015-05-21 01:15:34 -07001501# the code including all documentation.
1502
1503GENERATE_XML = NO
1504
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001505# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1506# If a relative path is entered the value of OUTPUT_DIRECTORY will be
Johan Euphrosine5388c522015-05-21 01:15:34 -07001507# put in front of it. If left blank `xml' will be used as the default path.
1508
1509XML_OUTPUT = xml
1510
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001511# The XML_SCHEMA tag can be used to specify an XML schema,
1512# which can be used by a validating XML parser to check the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001513# syntax of the XML files.
1514
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001515XML_SCHEMA =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001516
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001517# The XML_DTD tag can be used to specify an XML DTD,
1518# which can be used by a validating XML parser to check the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001519# syntax of the XML files.
1520
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001521XML_DTD =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001522
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001523# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1524# dump the program listings (including syntax highlighting
1525# and cross-referencing information) to the XML output. Note that
Johan Euphrosine5388c522015-05-21 01:15:34 -07001526# enabling this will significantly increase the size of the XML output.
1527
1528XML_PROGRAMLISTING = YES
1529
1530#---------------------------------------------------------------------------
1531# configuration options for the AutoGen Definitions output
1532#---------------------------------------------------------------------------
1533
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001534# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1535# generate an AutoGen Definitions (see autogen.sf.net) file
1536# that captures the structure of the code including all
1537# documentation. Note that this feature is still experimental
Johan Euphrosine5388c522015-05-21 01:15:34 -07001538# and incomplete at the moment.
1539
1540GENERATE_AUTOGEN_DEF = NO
1541
1542#---------------------------------------------------------------------------
1543# configuration options related to the Perl module output
1544#---------------------------------------------------------------------------
1545
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001546# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1547# generate a Perl module file that captures the structure of
1548# the code including all documentation. Note that this
1549# feature is still experimental and incomplete at the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001550# moment.
1551
1552GENERATE_PERLMOD = NO
1553
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001554# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1555# the necessary Makefile rules, Perl scripts and LaTeX code to be able
Johan Euphrosine5388c522015-05-21 01:15:34 -07001556# to generate PDF and DVI output from the Perl module output.
1557
1558PERLMOD_LATEX = NO
1559
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001560# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1561# nicely formatted so it can be parsed by a human reader. This is useful
1562# if you want to understand what is going on. On the other hand, if this
1563# tag is set to NO the size of the Perl module output will be much smaller
Johan Euphrosine5388c522015-05-21 01:15:34 -07001564# and Perl will parse it just the same.
1565
1566PERLMOD_PRETTY = YES
1567
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001568# The names of the make variables in the generated doxyrules.make file
1569# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1570# This is useful so different doxyrules.make files included by the same
Johan Euphrosine5388c522015-05-21 01:15:34 -07001571# Makefile don't overwrite each other's variables.
1572
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001573PERLMOD_MAKEVAR_PREFIX =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001574
1575#---------------------------------------------------------------------------
1576# Configuration options related to the preprocessor
1577#---------------------------------------------------------------------------
1578
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001579# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1580# evaluate all C-preprocessor directives found in the sources and include
Johan Euphrosine5388c522015-05-21 01:15:34 -07001581# files.
1582
Quddus Chong81dd15e2018-02-02 10:36:23 -08001583ENABLE_PREPROCESSING = YES
Johan Euphrosine5388c522015-05-21 01:15:34 -07001584
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001585# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1586# names in the source code. If set to NO (the default) only conditional
1587# compilation will be performed. Macro expansion can be done in a controlled
Johan Euphrosine5388c522015-05-21 01:15:34 -07001588# way by setting EXPAND_ONLY_PREDEF to YES.
1589
Quddus Chong81dd15e2018-02-02 10:36:23 -08001590MACRO_EXPANSION = YES
Johan Euphrosine5388c522015-05-21 01:15:34 -07001591
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001592# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1593# then the macro expansion is limited to the macros specified with the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001594# PREDEFINED and EXPAND_AS_DEFINED tags.
1595
Quddus Chong81dd15e2018-02-02 10:36:23 -08001596EXPAND_ONLY_PREDEF = YES
Johan Euphrosine5388c522015-05-21 01:15:34 -07001597
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001598# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
Johan Euphrosine5388c522015-05-21 01:15:34 -07001599# pointed to by INCLUDE_PATH will be searched when a #include is found.
1600
1601SEARCH_INCLUDES = YES
1602
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001603# The INCLUDE_PATH tag can be used to specify one or more directories that
1604# contain include files that are not input files but should be processed by
Johan Euphrosine5388c522015-05-21 01:15:34 -07001605# the preprocessor.
1606
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001607INCLUDE_PATH =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001608
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001609# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1610# patterns (like *.h and *.hpp) to filter out the header-files in the
1611# directories. If left blank, the patterns specified with FILE_PATTERNS will
Johan Euphrosine5388c522015-05-21 01:15:34 -07001612# be used.
1613
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001614INCLUDE_FILE_PATTERNS =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001615
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001616# The PREDEFINED tag can be used to specify one or more macro names that
1617# are defined before the preprocessor is started (similar to the -D option of
1618# gcc). The argument of the tag is a list of macros of the form: name
1619# or name=definition (no spaces). If the definition and the = are
1620# omitted =1 is assumed. To prevent a macro definition from being
1621# undefined via #undef or recursively expanded use the := operator
Johan Euphrosine5388c522015-05-21 01:15:34 -07001622# instead of the = operator.
1623
Dan Albertd124aef2020-04-24 13:12:25 -07001624PREDEFINED = \
1625 "__ANDROID_API__=10000" \
1626 "__BEGIN_DECLS=" \
1627 "__END_DECLS=" \
1628 "__INTRODUCED_IN(x)=" \
1629 "__INTRODUCED_IN_32(x)=" \
1630 "__INTRODUCED_IN_64(x)=" \
1631 "__RENAME(x)=" \
1632 "__RENAME_LDBL(x,y,z)=" \
1633 "__printflike(x,y)=" \
1634 "__attribute__(x)=" \
1635 "__wur=" \
1636 "__mallocfunc=" \
1637 "__attribute_pure__=" \
1638 "__attribute__(x)=" \
1639 __ANDROID__ \
1640 __BIONIC__ \
Johan Euphrosine5388c522015-05-21 01:15:34 -07001641
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001642# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1643# this tag can be used to specify a list of macro names that should be expanded.
1644# The macro definition that is found in the sources will be used.
1645# Use the PREDEFINED tag if you want to use a different macro definition that
Johan Euphrosine5388c522015-05-21 01:15:34 -07001646# overrules the definition found in the source code.
1647
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001648EXPAND_AS_DEFINED =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001649
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001650# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1651# doxygen's preprocessor will remove all references to function-like macros
1652# that are alone on a line, have an all uppercase name, and do not end with a
Johan Euphrosine5388c522015-05-21 01:15:34 -07001653# semicolon, because these will confuse the parser if not removed.
1654
1655SKIP_FUNCTION_MACROS = YES
1656
1657#---------------------------------------------------------------------------
1658# Configuration::additions related to external references
1659#---------------------------------------------------------------------------
1660
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001661# The TAGFILES option can be used to specify one or more tagfiles. For each
1662# tag file the location of the external documentation should be added. The
1663# format of a tag file without this location is as follows:
1664# TAGFILES = file1 file2 ...
1665# Adding location for the tag files is done as follows:
1666# TAGFILES = file1=loc1 "file2 = loc2" ...
1667# where "loc1" and "loc2" can be relative or absolute paths
1668# or URLs. Note that each tag file must have a unique name (where the name does
1669# NOT include the path). If a tag file is not located in the directory in which
Johan Euphrosine5388c522015-05-21 01:15:34 -07001670# doxygen is run, you must also specify the path to the tagfile here.
1671
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001672TAGFILES =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001673
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001674# When a file name is specified after GENERATE_TAGFILE, doxygen will create
Johan Euphrosine5388c522015-05-21 01:15:34 -07001675# a tag file that is based on the input files it reads.
1676
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001677GENERATE_TAGFILE =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001678
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001679# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1680# in the class index. If set to NO only the inherited external classes
Johan Euphrosine5388c522015-05-21 01:15:34 -07001681# will be listed.
1682
1683ALLEXTERNALS = NO
1684
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001685# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1686# in the modules index. If set to NO, only the current project's groups will
Johan Euphrosine5388c522015-05-21 01:15:34 -07001687# be listed.
1688
1689EXTERNAL_GROUPS = YES
1690
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001691# The PERL_PATH should be the absolute path and name of the perl script
Johan Euphrosine5388c522015-05-21 01:15:34 -07001692# interpreter (i.e. the result of `which perl').
1693
1694PERL_PATH = /usr/bin/perl
1695
1696#---------------------------------------------------------------------------
1697# Configuration options related to the dot tool
1698#---------------------------------------------------------------------------
1699
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001700# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1701# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1702# or super classes. Setting the tag to NO turns the diagrams off. Note that
1703# this option also works with HAVE_DOT disabled, but it is recommended to
Johan Euphrosine5388c522015-05-21 01:15:34 -07001704# install and use dot, since it yields more powerful graphs.
1705
1706CLASS_DIAGRAMS = NO
1707
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001708# You can define message sequence charts within doxygen comments using the \msc
1709# command. Doxygen will then run the mscgen tool (see
1710# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1711# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1712# the mscgen tool resides. If left empty the tool is assumed to be found in the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001713# default search path.
1714
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001715MSCGEN_PATH =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001716
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001717# If set to YES, the inheritance and collaboration graphs will hide
1718# inheritance and usage relations if the target is undocumented
Johan Euphrosine5388c522015-05-21 01:15:34 -07001719# or is not a class.
1720
1721HIDE_UNDOC_RELATIONS = YES
1722
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001723# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1724# available from the path. This tool is part of Graphviz, a graph visualization
1725# toolkit from AT&T and Lucent Bell Labs. The other options in this section
Johan Euphrosine5388c522015-05-21 01:15:34 -07001726# have no effect if this option is set to NO (the default)
1727
1728HAVE_DOT = NO
1729
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001730# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
1731# allowed to run in parallel. When set to 0 (the default) doxygen will
1732# base this on the number of processors available in the system. You can set it
1733# explicitly to a value larger than 0 to get control over the balance
Johan Euphrosine5388c522015-05-21 01:15:34 -07001734# between CPU load and processing speed.
1735
1736DOT_NUM_THREADS = 0
1737
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001738# By default doxygen will use the Helvetica font for all dot files that
1739# doxygen generates. When you want a differently looking font you can specify
1740# the font name using DOT_FONTNAME. You need to make sure dot is able to find
1741# the font, which can be done by putting it in a standard location or by setting
1742# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001743# directory containing the font.
1744
1745DOT_FONTNAME = Helvetica
1746
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001747# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
Johan Euphrosine5388c522015-05-21 01:15:34 -07001748# The default size is 10pt.
1749
1750DOT_FONTSIZE = 10
1751
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001752# By default doxygen will tell dot to use the Helvetica font.
1753# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
Johan Euphrosine5388c522015-05-21 01:15:34 -07001754# set the path where dot can find it.
1755
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001756DOT_FONTPATH =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001757
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001758# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1759# will generate a graph for each documented class showing the direct and
1760# indirect inheritance relations. Setting this tag to YES will force the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001761# CLASS_DIAGRAMS tag to NO.
1762
1763CLASS_GRAPH = YES
1764
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001765# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1766# will generate a graph for each documented class showing the direct and
1767# indirect implementation dependencies (inheritance, containment, and
Johan Euphrosine5388c522015-05-21 01:15:34 -07001768# class references variables) of the class with other documented classes.
1769
1770COLLABORATION_GRAPH = YES
1771
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001772# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
Johan Euphrosine5388c522015-05-21 01:15:34 -07001773# will generate a graph for groups, showing the direct groups dependencies
1774
1775GROUP_GRAPHS = YES
1776
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001777# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1778# collaboration diagrams in a style similar to the OMG's Unified Modeling
Johan Euphrosine5388c522015-05-21 01:15:34 -07001779# Language.
1780
1781UML_LOOK = NO
1782
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001783# If the UML_LOOK tag is enabled, the fields and methods are shown inside
1784# the class node. If there are many fields or methods and many nodes the
1785# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
1786# threshold limits the number of items for each type to make the size more
1787# managable. Set this to 0 for no limit. Note that the threshold may be
Johan Euphrosine5388c522015-05-21 01:15:34 -07001788# exceeded by 50% before the limit is enforced.
1789
1790UML_LIMIT_NUM_FIELDS = 10
1791
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001792# If set to YES, the inheritance and collaboration graphs will show the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001793# relations between templates and their instances.
1794
1795TEMPLATE_RELATIONS = NO
1796
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001797# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1798# tags are set to YES then doxygen will generate a graph for each documented
1799# file showing the direct and indirect include dependencies of the file with
Johan Euphrosine5388c522015-05-21 01:15:34 -07001800# other documented files.
1801
1802INCLUDE_GRAPH = YES
1803
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001804# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1805# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1806# documented header file showing the documented files that directly or
Johan Euphrosine5388c522015-05-21 01:15:34 -07001807# indirectly include this file.
1808
1809INCLUDED_BY_GRAPH = YES
1810
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001811# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1812# doxygen will generate a call dependency graph for every global function
1813# or class method. Note that enabling this option will significantly increase
1814# the time of a run. So in most cases it will be better to enable call graphs
Johan Euphrosine5388c522015-05-21 01:15:34 -07001815# for selected functions only using the \callgraph command.
1816
1817CALL_GRAPH = NO
1818
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001819# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1820# doxygen will generate a caller dependency graph for every global function
1821# or class method. Note that enabling this option will significantly increase
1822# the time of a run. So in most cases it will be better to enable caller
Johan Euphrosine5388c522015-05-21 01:15:34 -07001823# graphs for selected functions only using the \callergraph command.
1824
1825CALLER_GRAPH = NO
1826
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001827# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
Johan Euphrosine5388c522015-05-21 01:15:34 -07001828# will generate a graphical hierarchy of all classes instead of a textual one.
1829
1830GRAPHICAL_HIERARCHY = YES
1831
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001832# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
1833# then doxygen will show the dependencies a directory has on other directories
1834# in a graphical way. The dependency relations are determined by the #include
Johan Euphrosine5388c522015-05-21 01:15:34 -07001835# relations between the files in the directories.
1836
1837DIRECTORY_GRAPH = YES
1838
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001839# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1840# generated by dot. Possible values are svg, png, jpg, or gif.
1841# If left blank png will be used. If you choose svg you need to set
1842# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
Johan Euphrosine5388c522015-05-21 01:15:34 -07001843# visible in IE 9+ (other browsers do not have this requirement).
1844
1845DOT_IMAGE_FORMAT = png
1846
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001847# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
1848# enable generation of interactive SVG images that allow zooming and panning.
1849# Note that this requires a modern browser other than Internet Explorer.
1850# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
1851# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
Johan Euphrosine5388c522015-05-21 01:15:34 -07001852# visible. Older versions of IE do not have SVG support.
1853
1854INTERACTIVE_SVG = NO
1855
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001856# The tag DOT_PATH can be used to specify the path where the dot tool can be
Johan Euphrosine5388c522015-05-21 01:15:34 -07001857# found. If left blank, it is assumed the dot tool can be found in the path.
1858
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001859DOT_PATH =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001860
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001861# The DOTFILE_DIRS tag can be used to specify one or more directories that
1862# contain dot files that are included in the documentation (see the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001863# \dotfile command).
1864
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001865DOTFILE_DIRS =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001866
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001867# The MSCFILE_DIRS tag can be used to specify one or more directories that
1868# contain msc files that are included in the documentation (see the
Johan Euphrosine5388c522015-05-21 01:15:34 -07001869# \mscfile command).
1870
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001871MSCFILE_DIRS =
Johan Euphrosine5388c522015-05-21 01:15:34 -07001872
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001873# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1874# nodes that will be shown in the graph. If the number of nodes in a graph
1875# becomes larger than this value, doxygen will truncate the graph, which is
1876# visualized by representing a node as a red box. Note that doxygen if the
1877# number of direct children of the root node in a graph is already larger than
1878# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
Johan Euphrosine5388c522015-05-21 01:15:34 -07001879# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1880
1881DOT_GRAPH_MAX_NODES = 50
1882
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001883# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1884# graphs generated by dot. A depth value of 3 means that only nodes reachable
1885# from the root by following a path via at most 3 edges will be shown. Nodes
1886# that lay further from the root node will be omitted. Note that setting this
1887# option to 1 or 2 may greatly reduce the computation time needed for large
1888# code bases. Also note that the size of a graph can be further restricted by
Johan Euphrosine5388c522015-05-21 01:15:34 -07001889# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1890
1891MAX_DOT_GRAPH_DEPTH = 0
1892
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001893# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1894# background. This is disabled by default, because dot on Windows does not
1895# seem to support this out of the box. Warning: Depending on the platform used,
1896# enabling this option may lead to badly anti-aliased labels on the edges of
Johan Euphrosine5388c522015-05-21 01:15:34 -07001897# a graph (i.e. they become hard to read).
1898
1899DOT_TRANSPARENT = NO
1900
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001901# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1902# files in one run (i.e. multiple -o and -T options on the command line). This
1903# makes dot run faster, but since only newer versions of dot (>1.8.10)
Johan Euphrosine5388c522015-05-21 01:15:34 -07001904# support this, this feature is disabled by default.
1905
1906DOT_MULTI_TARGETS = NO
1907
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001908# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1909# generate a legend page explaining the meaning of the various boxes and
Johan Euphrosine5388c522015-05-21 01:15:34 -07001910# arrows in the dot generated graphs.
1911
1912GENERATE_LEGEND = YES
1913
Quddus Chong4fe1ead2017-02-22 15:19:35 -08001914# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1915# remove the intermediate dot files that are used to generate
Johan Euphrosine5388c522015-05-21 01:15:34 -07001916# the various graphs.
1917
1918DOT_CLEANUP = YES