Revert "policy_hal: Initial change for the new libaudiopolicymanager"

This reverts commit 0670f1668c90399c3e00d6682b56d3e10c2c0074

Change-Id: Ie03ef15f7f6d6e1cf88c4b39b0d9a0362c17a731
diff --git a/policy_hal/AudioPolicyManager.h b/policy_hal/AudioPolicyManager.h
index 0dd015a..9f2b473 100644
--- a/policy_hal/AudioPolicyManager.h
+++ b/policy_hal/AudioPolicyManager.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
  * Not a contribution.
  *
  * Copyright (C) 2009 The Android Open Source Project
@@ -20,470 +20,53 @@
 
 #include <stdint.h>
 #include <sys/types.h>
-#include <cutils/config_utils.h>
-#include <cutils/misc.h>
 #include <utils/Timers.h>
 #include <utils/Errors.h>
 #include <utils/KeyedVector.h>
-#include <utils/SortedVector.h>
-#include "AudioPolicyInterface.h"
+#include <hardware_legacy/AudioPolicyManagerBase.h>
 
 
-namespace android {
+namespace android_audio_legacy {
 
 // ----------------------------------------------------------------------------
 
-// Attenuation applied to STRATEGY_SONIFICATION streams when a headset is connected: 6dB
-#define SONIFICATION_HEADSET_VOLUME_FACTOR 0.5
-// Min volume for STRATEGY_SONIFICATION streams when limited by music volume: -36dB
-#define SONIFICATION_HEADSET_VOLUME_MIN  0.016
-// Time in milliseconds during which we consider that music is still active after a music
-// track was stopped - see computeVolume()
-#define SONIFICATION_HEADSET_MUSIC_DELAY  5000
-// Time in milliseconds after media stopped playing during which we consider that the
-// sonification should be as unobtrusive as during the time media was playing.
-#define SONIFICATION_RESPECTFUL_AFTER_MUSIC_DELAY 5000
-// Time in milliseconds during witch some streams are muted while the audio path
-// is switched
-#define MUTE_TIME_MS 2000
-
-#define NUM_TEST_OUTPUTS 5
-
-#define NUM_VOL_CURVE_KNEES 2
-
-// Default minimum length allowed for offloading a compressed track
-// Can be overridden by the audio.offload.min.duration.secs property
-#define OFFLOAD_DEFAULT_MIN_DURATION_SECS 60
-
-// ----------------------------------------------------------------------------
-// AudioPolicyManager implements audio policy manager behavior common to all platforms.
-// ----------------------------------------------------------------------------
-
-class AudioPolicyManager: public AudioPolicyInterface
-#ifdef AUDIO_POLICY_TEST
-    , public Thread
-#endif //AUDIO_POLICY_TEST
+class AudioPolicyManager: public AudioPolicyManagerBase
 {
 
 public:
-                AudioPolicyManager(AudioPolicyClientInterface *clientInterface);
-        virtual ~AudioPolicyManager();
+                AudioPolicyManager(AudioPolicyClientInterface *clientInterface)
+                : AudioPolicyManagerBase(clientInterface) {
+                    mHdmiAudioDisabled = false;
+                    mHdmiAudioEvent = false; }
 
-        // AudioPolicyInterface
+        virtual ~AudioPolicyManager() {}
+
         virtual status_t setDeviceConnectionState(audio_devices_t device,
-                                                          audio_policy_dev_state_t state,
+                                                          AudioSystem::device_connection_state state,
                                                           const char *device_address);
-        virtual audio_policy_dev_state_t getDeviceConnectionState(audio_devices_t device,
-                                                                              const char *device_address);
-        virtual void setPhoneState(audio_mode_t state);
-        virtual void setForceUse(audio_policy_force_use_t usage,
-                                 audio_policy_forced_cfg_t config);
-        virtual audio_policy_forced_cfg_t getForceUse(audio_policy_force_use_t usage);
-        virtual void setSystemProperty(const char* property, const char* value);
-        virtual status_t initCheck();
-        virtual audio_io_handle_t getOutput(audio_stream_type_t stream,
+        virtual void setForceUse(AudioSystem::force_use usage, AudioSystem::forced_config config);
+        virtual audio_io_handle_t getInput(int inputSource,
                                             uint32_t samplingRate,
-                                            audio_format_t format,
-                                            audio_channel_mask_t channelMask,
-                                            audio_output_flags_t flags,
-                                            const audio_offload_info_t *offloadInfo);
-        virtual status_t startOutput(audio_io_handle_t output,
-                                     audio_stream_type_t stream,
-                                     int session = 0);
-        virtual status_t stopOutput(audio_io_handle_t output,
-                                    audio_stream_type_t stream,
-                                    int session = 0);
-        virtual void releaseOutput(audio_io_handle_t output);
-        virtual audio_io_handle_t getInput(audio_source_t inputSource,
-                                            uint32_t samplingRate,
-                                            audio_format_t format,
-                                            audio_channel_mask_t channelMask,
-                                            audio_in_acoustics_t acoustics);
-
-        // indicates to the audio policy manager that the input starts being used.
-        virtual status_t startInput(audio_io_handle_t input);
-
-        // indicates to the audio policy manager that the input stops being used.
-        virtual status_t stopInput(audio_io_handle_t input);
-        virtual void releaseInput(audio_io_handle_t input);
-        virtual void closeAllInputs();
-        virtual void initStreamVolume(audio_stream_type_t stream,
-                                                    int indexMin,
-                                                    int indexMax);
-        virtual status_t setStreamVolumeIndex(audio_stream_type_t stream,
-                                              int index,
-                                              audio_devices_t device);
-        virtual status_t getStreamVolumeIndex(audio_stream_type_t stream,
-                                              int *index,
-                                              audio_devices_t device);
-
-        // return the strategy corresponding to a given stream type
-        virtual uint32_t getStrategyForStream(audio_stream_type_t stream);
-
-        // return the enabled output devices for the given stream type
-        virtual audio_devices_t getDevicesForStream(audio_stream_type_t stream);
-
-        virtual audio_io_handle_t getOutputForEffect(const effect_descriptor_t *desc = NULL);
-        virtual status_t registerEffect(const effect_descriptor_t *desc,
-                                        audio_io_handle_t io,
-                                        uint32_t strategy,
-                                        int session,
-                                        int id);
-        virtual status_t unregisterEffect(int id);
-        virtual status_t setEffectEnabled(int id, bool enabled);
-
-        virtual bool isStreamActive(audio_stream_type_t stream, uint32_t inPastMs = 0) const;
-        // return whether a stream is playing remotely, override to change the definition of
-        //   local/remote playback, used for instance by notification manager to not make
-        //   media players lose audio focus when not playing locally
-        virtual bool isStreamActiveRemotely(audio_stream_type_t stream, uint32_t inPastMs = 0) const;
-        virtual bool isSourceActive(audio_source_t source) const;
-
-        virtual status_t dump(int fd);
+                                            uint32_t format,
+                                            uint32_t channels,
+                                            AudioSystem::audio_in_acoustics acoustics);
+        virtual audio_io_handle_t getOutput(AudioSystem::stream_type stream,
+                                            uint32_t samplingRate = 0,
+                                            uint32_t format = AudioSystem::FORMAT_DEFAULT,
+                                            uint32_t channels = 0,
+                                            AudioSystem::output_flags flags =
+                                                    AudioSystem::OUTPUT_FLAG_INDIRECT,
+                                            const audio_offload_info_t *offloadInfo = NULL);
 
         virtual bool isOffloadSupported(const audio_offload_info_t& offloadInfo);
 
-        virtual status_t listAudioPorts(audio_port_role_t role,
-                                        audio_port_type_t type,
-                                        unsigned int *num_ports,
-                                        struct audio_port *ports,
-                                        unsigned int *generation);
-        virtual status_t getAudioPort(struct audio_port *port);
-        virtual status_t createAudioPatch(const struct audio_patch *patch,
-                                           audio_patch_handle_t *handle,
-                                           uid_t uid);
-        virtual status_t releaseAudioPatch(audio_patch_handle_t handle,
-                                              uid_t uid);
-        virtual status_t listAudioPatches(unsigned int *num_patches,
-                                          struct audio_patch *patches,
-                                          unsigned int *generation);
-        virtual status_t setAudioPortConfig(const struct audio_port_config *config);
-        virtual void clearAudioPatches(uid_t uid);
+        virtual void setPhoneState(int state);
 
+        // true if given state represents a device in a telephony or VoIP call
+        virtual bool isStateInCall(int state);
 protected:
-
-        enum routing_strategy {
-            STRATEGY_MEDIA,
-            STRATEGY_PHONE,
-            STRATEGY_SONIFICATION,
-            STRATEGY_SONIFICATION_RESPECTFUL,
-            STRATEGY_DTMF,
-            STRATEGY_ENFORCED_AUDIBLE,
-            NUM_STRATEGIES
-        };
-
-        // 4 points to define the volume attenuation curve, each characterized by the volume
-        // index (from 0 to 100) at which they apply, and the attenuation in dB at that index.
-        // we use 100 steps to avoid rounding errors when computing the volume in volIndexToAmpl()
-
-        enum { VOLMIN = 0, VOLKNEE1 = 1, VOLKNEE2 = 2, VOLMAX = 3, VOLCNT = 4};
-
-        class VolumeCurvePoint
-        {
-        public:
-            int mIndex;
-            float mDBAttenuation;
-        };
-
-        // device categories used for volume curve management.
-        enum device_category {
-            DEVICE_CATEGORY_HEADSET,
-            DEVICE_CATEGORY_SPEAKER,
-            DEVICE_CATEGORY_EARPIECE,
-            DEVICE_CATEGORY_CNT
-        };
-
-        class HwModule;
-
-        class AudioGain: public RefBase
-        {
-        public:
-            AudioGain();
-            virtual ~AudioGain() {}
-
-            void dump(int fd, int spaces, int index) const;
-
-            struct audio_gain mGain;
-        };
-
-        class AudioPort: public RefBase
-        {
-        public:
-            AudioPort(const String8& name, audio_port_type_t type,
-                      audio_port_role_t role, HwModule *module) :
-                mName(name), mType(type), mRole(role), mModule(module) {}
-            virtual ~AudioPort() {}
-
-            virtual void toAudioPort(struct audio_port *port) const;
-
-            void loadSamplingRates(char *name);
-            void loadFormats(char *name);
-            void loadOutChannels(char *name);
-            void loadInChannels(char *name);
-
-            audio_gain_mode_t loadGainMode(char *name);
-            void loadGain(cnode *root);
-            void loadGains(cnode *root);
-
-            void dump(int fd, int spaces) const;
-
-            String8           mName;
-            audio_port_type_t mType;
-            audio_port_role_t mRole;
-            // by convention, "0' in the first entry in mSamplingRates, mChannelMasks or mFormats
-            // indicates the supported parameters should be read from the output stream
-            // after it is opened for the first time
-            Vector <uint32_t> mSamplingRates; // supported sampling rates
-            Vector <audio_channel_mask_t> mChannelMasks; // supported channel masks
-            Vector <audio_format_t> mFormats; // supported audio formats
-            Vector < sp<AudioGain> > mGains; // gain controllers
-            HwModule *mModule;                 // audio HW module exposing this I/O stream
-        };
-
-        class AudioPatch: public RefBase
-        {
-        public:
-            AudioPatch(audio_patch_handle_t handle,
-                       const struct audio_patch *patch, uid_t uid) :
-                           mHandle(handle), mPatch(*patch), mUid(uid), mAfPatchHandle(0) {}
-
-            audio_patch_handle_t mHandle;
-            struct audio_patch mPatch;
-            uid_t mUid;
-            audio_patch_handle_t mAfPatchHandle;
-        };
-
-        class DeviceDescriptor: public AudioPort
-        {
-        public:
-            DeviceDescriptor(const String8& name, audio_devices_t type, String8 address,
-                             audio_channel_mask_t channelMask) :
-                                 AudioPort(name, AUDIO_PORT_TYPE_DEVICE,
-                                           audio_is_output_device(type) ? AUDIO_PORT_ROLE_SINK :
-                                                                          AUDIO_PORT_ROLE_SOURCE,
-                                         NULL),
-                                 mDeviceType(type), mAddress(address),
-                                 mChannelMask(channelMask), mId(0) {}
-
-            DeviceDescriptor(String8 name, audio_devices_t type) :
-                                AudioPort(name, AUDIO_PORT_TYPE_DEVICE,
-                                          audio_is_output_device(type) ? AUDIO_PORT_ROLE_SINK :
-                                                                         AUDIO_PORT_ROLE_SOURCE,
-                                        NULL),
-                                mDeviceType(type), mAddress(""),
-                                mChannelMask(0), mId(0) {}
-            virtual ~DeviceDescriptor() {}
-
-            bool equals(const sp<DeviceDescriptor>& other) const;
-            void toAudioPortConfig(struct audio_port_config *dstConfig,
-                                   const struct audio_port_config *srcConfig = NULL) const;
-
-            virtual void toAudioPort(struct audio_port *port) const;
-
-            status_t dump(int fd, int spaces, int index) const;
-
-            audio_devices_t mDeviceType;
-            String8 mAddress;
-            audio_channel_mask_t mChannelMask;
-            audio_port_handle_t mId;
-        };
-
-        class DeviceVector : public SortedVector< sp<DeviceDescriptor> >
-        {
-        public:
-            DeviceVector() : SortedVector(), mDeviceTypes(AUDIO_DEVICE_NONE) {}
-
-            ssize_t         add(const sp<DeviceDescriptor>& item);
-            ssize_t         remove(const sp<DeviceDescriptor>& item);
-            ssize_t         indexOf(const sp<DeviceDescriptor>& item) const;
-
-            audio_devices_t types() const { return mDeviceTypes; }
-
-            void loadDevicesFromType(audio_devices_t types);
-            void loadDevicesFromName(char *name, const DeviceVector& declaredDevices);
-
-            sp<DeviceDescriptor> getDevice(audio_devices_t type, String8 address) const;
-            DeviceVector getDevicesFromType(audio_devices_t types) const;
-            sp<DeviceDescriptor> getDeviceFromId(audio_port_handle_t id) const;
-            sp<DeviceDescriptor> getDeviceFromName(const String8& name) const;
-
-        private:
-            void refreshTypes();
-            audio_devices_t mDeviceTypes;
-        };
-
-        // the IOProfile class describes the capabilities of an output or input stream.
-        // It is currently assumed that all combination of listed parameters are supported.
-        // It is used by the policy manager to determine if an output or input is suitable for
-        // a given use case,  open/close it accordingly and connect/disconnect audio tracks
-        // to/from it.
-        class IOProfile : public AudioPort
-        {
-        public:
-            IOProfile(const String8& name, audio_port_role_t role, HwModule *module);
-            virtual ~IOProfile();
-
-            bool isCompatibleProfile(audio_devices_t device,
-                                     uint32_t samplingRate,
-                                     audio_format_t format,
-                                     audio_channel_mask_t channelMask,
-                                     audio_output_flags_t flags) const;
-
-            void dump(int fd);
-            void log();
-
-            DeviceVector  mSupportedDevices; // supported devices
-                                             // (devices this output can be routed to)
-            audio_output_flags_t mFlags; // attribute flags (e.g primary output,
-                                                // direct output...). For outputs only.
-        };
-
-        class HwModule {
-        public:
-                    HwModule(const char *name);
-                    ~HwModule();
-
-            status_t loadOutput(cnode *root);
-            status_t loadInput(cnode *root);
-            status_t loadDevice(cnode *root);
-
-            void dump(int fd);
-
-            const char *const mName; // base name of the audio HW module (primary, a2dp ...)
-            audio_module_handle_t mHandle;
-            Vector < sp<IOProfile> > mOutputProfiles; // output profiles exposed by this module
-            Vector < sp<IOProfile> > mInputProfiles;  // input profiles exposed by this module
-            DeviceVector             mDeclaredDevices; // devices declared in audio_policy.conf
-
-        };
-
-        // default volume curve
-        static const VolumeCurvePoint sDefaultVolumeCurve[AudioPolicyManager::VOLCNT];
-        // default volume curve for media strategy
-        static const VolumeCurvePoint sDefaultMediaVolumeCurve[AudioPolicyManager::VOLCNT];
-        // volume curve for media strategy on speakers
-        static const VolumeCurvePoint sSpeakerMediaVolumeCurve[AudioPolicyManager::VOLCNT];
-        // volume curve for sonification strategy on speakers
-        static const VolumeCurvePoint sSpeakerSonificationVolumeCurve[AudioPolicyManager::VOLCNT];
-        static const VolumeCurvePoint sSpeakerSonificationVolumeCurveDrc[AudioPolicyManager::VOLCNT];
-        static const VolumeCurvePoint sDefaultSystemVolumeCurve[AudioPolicyManager::VOLCNT];
-        static const VolumeCurvePoint sDefaultSystemVolumeCurveDrc[AudioPolicyManager::VOLCNT];
-        static const VolumeCurvePoint sHeadsetSystemVolumeCurve[AudioPolicyManager::VOLCNT];
-        static const VolumeCurvePoint sDefaultVoiceVolumeCurve[AudioPolicyManager::VOLCNT];
-        static const VolumeCurvePoint sSpeakerVoiceVolumeCurve[AudioPolicyManager::VOLCNT];
-        // default volume curves per stream and device category. See initializeVolumeCurves()
-        static const VolumeCurvePoint *sVolumeProfiles[AUDIO_STREAM_CNT][DEVICE_CATEGORY_CNT];
-
-        // descriptor for audio outputs. Used to maintain current configuration of each opened audio output
-        // and keep track of the usage of this output by each audio stream type.
-        class AudioOutputDescriptor
-        {
-        public:
-            AudioOutputDescriptor(const sp<IOProfile>& profile);
-
-            status_t    dump(int fd);
-
-            audio_devices_t device() const;
-            void changeRefCount(audio_stream_type_t stream, int delta);
-
-            bool isDuplicated() const { return (mOutput1 != NULL && mOutput2 != NULL); }
-            audio_devices_t supportedDevices();
-            uint32_t latency();
-            bool sharesHwModuleWith(const AudioOutputDescriptor *outputDesc);
-            bool isActive(uint32_t inPastMs = 0) const;
-            bool isStreamActive(audio_stream_type_t stream,
-                                uint32_t inPastMs = 0,
-                                nsecs_t sysTime = 0) const;
-            bool isStrategyActive(routing_strategy strategy,
-                             uint32_t inPastMs = 0,
-                             nsecs_t sysTime = 0) const;
-
-            void toAudioPortConfig(struct audio_port_config *dstConfig,
-                                   const struct audio_port_config *srcConfig = NULL) const;
-            void toAudioPort(struct audio_port *port) const;
-
-            audio_port_handle_t mId;
-            audio_io_handle_t mIoHandle;              // output handle
-            uint32_t mSamplingRate;             //
-            audio_format_t mFormat;             //
-            audio_channel_mask_t mChannelMask;     // output configuration
-            uint32_t mLatency;                  //
-            audio_output_flags_t mFlags;   //
-            audio_devices_t mDevice;                   // current device this output is routed to
-            audio_patch_handle_t mPatchHandle;
-            uint32_t mRefCount[AUDIO_STREAM_CNT]; // number of streams of each type using this output
-            nsecs_t mStopTime[AUDIO_STREAM_CNT];
-            AudioOutputDescriptor *mOutput1;    // used by duplicated outputs: first output
-            AudioOutputDescriptor *mOutput2;    // used by duplicated outputs: second output
-            float mCurVolume[AUDIO_STREAM_CNT];   // current stream volume
-            int mMuteCount[AUDIO_STREAM_CNT];     // mute request counter
-            const sp<IOProfile> mProfile;          // I/O profile this output derives from
-            bool mStrategyMutedByDevice[NUM_STRATEGIES]; // strategies muted because of incompatible
-                                                // device selection. See checkDeviceMuteStrategies()
-            uint32_t mDirectOpenCount; // number of clients using this output (direct outputs only)
-        };
-
-        // descriptor for audio inputs. Used to maintain current configuration of each opened audio input
-        // and keep track of the usage of this input.
-        class AudioInputDescriptor
-        {
-        public:
-            AudioInputDescriptor(const sp<IOProfile>& profile);
-
-            status_t    dump(int fd);
-
-            audio_port_handle_t mId;
-            audio_io_handle_t mIoHandle;              // input handle
-            uint32_t mSamplingRate;                     //
-            audio_format_t mFormat;                     // input configuration
-            audio_channel_mask_t mChannelMask;             //
-            audio_devices_t mDevice;                    // current device this input is routed to
-            audio_patch_handle_t mPatchHandle;
-            uint32_t mRefCount;                         // number of AudioRecord clients using this output
-            audio_source_t mInputSource;                // input source selected by application (mediarecorder.h)
-            const sp<IOProfile> mProfile;                  // I/O profile this output derives from
-
-            void toAudioPortConfig(struct audio_port_config *dstConfig,
-                                   const struct audio_port_config *srcConfig = NULL) const;
-            void toAudioPort(struct audio_port *port) const;
-        };
-
-        // stream descriptor used for volume control
-        class StreamDescriptor
-        {
-        public:
-            StreamDescriptor();
-
-            int getVolumeIndex(audio_devices_t device);
-            void dump(int fd);
-
-            int mIndexMin;      // min volume index
-            int mIndexMax;      // max volume index
-            KeyedVector<audio_devices_t, int> mIndexCur;   // current volume index per device
-            bool mCanBeMuted;   // true is the stream can be muted
-
-            const VolumeCurvePoint *mVolumeCurve[DEVICE_CATEGORY_CNT];
-        };
-
-        // stream descriptor used for volume control
-        class EffectDescriptor
-        {
-        public:
-
-            status_t dump(int fd);
-
-            int mIo;                // io the effect is attached to
-            routing_strategy mStrategy; // routing strategy the effect is associated to
-            int mSession;               // audio session the effect is on
-            effect_descriptor_t mDesc;  // effect descriptor
-            bool mEnabled;              // enabled state: CPU load being used or not
-        };
-
-        void addOutput(audio_io_handle_t output, AudioOutputDescriptor *outputDesc);
-        void addInput(audio_io_handle_t input, AudioInputDescriptor *inputDesc);
-
         // return the strategy corresponding to a given stream type
-        static routing_strategy getStrategy(audio_stream_type_t stream);
+        static routing_strategy getStrategy(AudioSystem::stream_type stream);
 
         // return appropriate device for streams handled by the specified strategy according to current
         // phone state, connected devices...
@@ -497,258 +80,32 @@
         //  where conditions are changing (setDeviceConnectionState(), setPhoneState()...) AND
         //  before updateDevicesAndOutputs() is called.
         virtual audio_devices_t getDeviceForStrategy(routing_strategy strategy,
-                                                     bool fromCache);
-
-        // change the route of the specified output. Returns the number of ms we have slept to
-        // allow new routing to take effect in certain cases.
-        uint32_t setOutputDevice(audio_io_handle_t output,
-                             audio_devices_t device,
-                             bool force = false,
-                             int delayMs = 0,
-                             audio_patch_handle_t *patchHandle = NULL);
-        status_t resetOutputDevice(audio_io_handle_t output,
-                                   int delayMs = 0,
-                                   audio_patch_handle_t *patchHandle = NULL);
-        status_t setInputDevice(audio_io_handle_t input,
-                                audio_devices_t device,
-                                bool force = false,
-                                audio_patch_handle_t *patchHandle = NULL);
-        status_t resetInputDevice(audio_io_handle_t input,
-                                  audio_patch_handle_t *patchHandle = NULL);
-
+                                                     bool fromCache = true);
         // select input device corresponding to requested audio source
-        virtual audio_devices_t getDeviceForInputSource(audio_source_t inputSource);
-
-        // return io handle of active input or 0 if no input is active
-        //    Only considers inputs from physical devices (e.g. main mic, headset mic) when
-        //    ignoreVirtualInputs is true.
-        audio_io_handle_t getActiveInput(bool ignoreVirtualInputs = true);
-
-        // initialize volume curves for each strategy and device category
-        void initializeVolumeCurves();
+        virtual audio_devices_t getDeviceForInputSource(int inputSource);
 
         // compute the actual volume for a given stream according to the requested index and a particular
         // device
-        virtual float computeVolume(audio_stream_type_t stream, int index,
-                                    audio_io_handle_t output, audio_devices_t device);
+        virtual float computeVolume(int stream, int index, audio_io_handle_t output, audio_devices_t device);
 
         // check that volume change is permitted, compute and send new volume to audio hardware
-        status_t checkAndSetVolume(audio_stream_type_t stream, int index, audio_io_handle_t output,
-                                   audio_devices_t device, int delayMs = 0, bool force = false);
-
-        // apply all stream volumes to the specified output and device
-        void applyStreamVolumes(audio_io_handle_t output, audio_devices_t device, int delayMs = 0, bool force = false);
-
-        // Mute or unmute all streams handled by the specified strategy on the specified output
-        void setStrategyMute(routing_strategy strategy,
-                             bool on,
-                             audio_io_handle_t output,
-                             int delayMs = 0,
-                             audio_devices_t device = (audio_devices_t)0);
-
-        // Mute or unmute the stream on the specified output
-        void setStreamMute(audio_stream_type_t stream,
-                           bool on,
-                           audio_io_handle_t output,
-                           int delayMs = 0,
-                           audio_devices_t device = (audio_devices_t)0);
-
-        // handle special cases for sonification strategy while in call: mute streams or replace by
-        // a special tone in the device used for communication
-        void handleIncallSonification(audio_stream_type_t stream, bool starting, bool stateChange);
-
-        // true if device is in a telephony or VoIP call
-        virtual bool isInCall();
-
-        // true if given state represents a device in a telephony or VoIP call
-        virtual bool isStateInCall(int state);
-
-        // when a device is connected, checks if an open output can be routed
-        // to this device. If none is open, tries to open one of the available outputs.
-        // Returns an output suitable to this device or 0.
-        // when a device is disconnected, checks if an output is not used any more and
-        // returns its handle if any.
-        // transfers the audio tracks and effects from one output thread to another accordingly.
-        status_t checkOutputsForDevice(audio_devices_t device,
-                                       audio_policy_dev_state_t state,
-                                       SortedVector<audio_io_handle_t>& outputs,
-                                       const String8 address);
-
-        status_t checkInputsForDevice(audio_devices_t device,
-                                      audio_policy_dev_state_t state,
-                                      SortedVector<audio_io_handle_t>& inputs,
-                                      const String8 address);
-
-        // close an output and its companion duplicating output.
-        void closeOutput(audio_io_handle_t output);
-
-        // checks and if necessary changes outputs used for all strategies.
-        // must be called every time a condition that affects the output choice for a given strategy
-        // changes: connected device, phone state, force use...
-        // Must be called before updateDevicesAndOutputs()
-        void checkOutputForStrategy(routing_strategy strategy);
-
-        // Same as checkOutputForStrategy() but for a all strategies in order of priority
-        void checkOutputForAllStrategies();
-
-        // manages A2DP output suspend/restore according to phone state and BT SCO usage
-        void checkA2dpSuspend();
-
-        // returns the A2DP output handle if it is open or 0 otherwise
-        audio_io_handle_t getA2dpOutput();
-
-        // selects the most appropriate device on output for current state
-        // must be called every time a condition that affects the device choice for a given output is
-        // changed: connected device, phone state, force use, output start, output stop..
-        // see getDeviceForStrategy() for the use of fromCache parameter
-        audio_devices_t getNewOutputDevice(audio_io_handle_t output, bool fromCache);
-
-        // updates cache of device used by all strategies (mDeviceForStrategy[])
-        // must be called every time a condition that affects the device choice for a given strategy is
-        // changed: connected device, phone state, force use...
-        // cached values are used by getDeviceForStrategy() if parameter fromCache is true.
-         // Must be called after checkOutputForAllStrategies()
-        void updateDevicesAndOutputs();
-
-        // selects the most appropriate device on input for current state
-        audio_devices_t getNewInputDevice(audio_io_handle_t input);
-
-        virtual uint32_t getMaxEffectsCpuLoad();
-        virtual uint32_t getMaxEffectsMemory();
-#ifdef AUDIO_POLICY_TEST
-        virtual     bool        threadLoop();
-                    void        exit();
-        int testOutputIndex(audio_io_handle_t output);
-#endif //AUDIO_POLICY_TEST
-
-        status_t setEffectEnabled(EffectDescriptor *pDesc, bool enabled);
+        status_t checkAndSetVolume(int stream, int index, audio_io_handle_t output, audio_devices_t device, int delayMs = 0, bool force = false);
 
         // returns the category the device belongs to with regard to volume curve management
         static device_category getDeviceCategory(audio_devices_t device);
 
-        // extract one device relevant for volume control from multiple device selection
-        static audio_devices_t getDeviceForVolume(audio_devices_t device);
+        static const char* HDMI_SPKR_STR;
 
-        SortedVector<audio_io_handle_t> getOutputsForDevice(audio_devices_t device,
-                        DefaultKeyedVector<audio_io_handle_t, AudioOutputDescriptor *> openOutputs);
-        bool vectorsEqual(SortedVector<audio_io_handle_t>& outputs1,
-                                           SortedVector<audio_io_handle_t>& outputs2);
+        //parameter indicates of HDMI speakers disabled from the Qualcomm settings
+        bool mHdmiAudioDisabled;
 
-        // mute/unmute strategies using an incompatible device combination
-        // if muting, wait for the audio in pcm buffer to be drained before proceeding
-        // if unmuting, unmute only after the specified delay
-        // Returns the number of ms waited
-        uint32_t  checkDeviceMuteStrategies(AudioOutputDescriptor *outputDesc,
-                                            audio_devices_t prevDevice,
-                                            uint32_t delayMs);
-
-        audio_io_handle_t selectOutput(const SortedVector<audio_io_handle_t>& outputs,
-                                       audio_output_flags_t flags);
-        sp<IOProfile> getInputProfile(audio_devices_t device,
-                                   uint32_t samplingRate,
-                                   audio_format_t format,
-                                   audio_channel_mask_t channelMask);
-        sp<IOProfile> getProfileForDirectOutput(audio_devices_t device,
-                                                       uint32_t samplingRate,
-                                                       audio_format_t format,
-                                                       audio_channel_mask_t channelMask,
-                                                       audio_output_flags_t flags);
-
-        audio_io_handle_t selectOutputForEffects(const SortedVector<audio_io_handle_t>& outputs);
-
-        bool isNonOffloadableEffectEnabled();
-
-        status_t addAudioPatch(audio_patch_handle_t handle,
-                               const sp<AudioPatch>& patch);
-        status_t removeAudioPatch(audio_patch_handle_t handle);
-
-        AudioOutputDescriptor *getOutputFromId(audio_port_handle_t id) const;
-        AudioInputDescriptor *getInputFromId(audio_port_handle_t id) const;
-        HwModule *getModuleForDevice(audio_devices_t device) const;
-        HwModule *getModuleFromName(const char *name) const;
-        //
-        // Audio policy configuration file parsing (audio_policy.conf)
-        //
-        static uint32_t stringToEnum(const struct StringToEnum *table,
-                                     size_t size,
-                                     const char *name);
-        static const char *enumToString(const struct StringToEnum *table,
-                                      size_t size,
-                                      uint32_t value);
-        static bool stringToBool(const char *value);
-        static audio_output_flags_t parseFlagNames(char *name);
-        static audio_devices_t parseDeviceNames(char *name);
-        void loadHwModule(cnode *root);
-        void loadHwModules(cnode *root);
-        void loadGlobalConfig(cnode *root, HwModule *module);
-        status_t loadAudioPolicyConfig(const char *path);
-        void defaultAudioPolicyConfig(void);
-
-
-        uid_t mUidCached;
-        AudioPolicyClientInterface *mpClientInterface;  // audio policy client interface
-        audio_io_handle_t mPrimaryOutput;              // primary output handle
-        // list of descriptors for outputs currently opened
-        DefaultKeyedVector<audio_io_handle_t, AudioOutputDescriptor *> mOutputs;
-        // copy of mOutputs before setDeviceConnectionState() opens new outputs
-        // reset to mOutputs when updateDevicesAndOutputs() is called.
-        DefaultKeyedVector<audio_io_handle_t, AudioOutputDescriptor *> mPreviousOutputs;
-        DefaultKeyedVector<audio_io_handle_t, AudioInputDescriptor *> mInputs;     // list of input descriptors
-        DeviceVector  mAvailableOutputDevices; // all available output devices
-        DeviceVector  mAvailableInputDevices;  // all available input devices
-        int mPhoneState;                                                    // current phone state
-        audio_policy_forced_cfg_t mForceUse[AUDIO_POLICY_FORCE_USE_CNT];   // current forced use configuration
-
-        StreamDescriptor mStreams[AUDIO_STREAM_CNT];           // stream descriptors for volume control
-        bool    mLimitRingtoneVolume;                                       // limit ringtone volume to music volume if headset connected
-        audio_devices_t mDeviceForStrategy[NUM_STRATEGIES];
-        float   mLastVoiceVolume;                                           // last voice volume value sent to audio HAL
-
-        // Maximum CPU load allocated to audio effects in 0.1 MIPS (ARMv5TE, 0 WS memory) units
-        static const uint32_t MAX_EFFECTS_CPU_LOAD = 1000;
-        // Maximum memory allocated to audio effects in KB
-        static const uint32_t MAX_EFFECTS_MEMORY = 512;
-        uint32_t mTotalEffectsCpuLoad; // current CPU load used by effects
-        uint32_t mTotalEffectsMemory;  // current memory used by effects
-        KeyedVector<int, EffectDescriptor *> mEffects;  // list of registered audio effects
-        bool    mA2dpSuspended;  // true if A2DP output is suspended
-        sp<DeviceDescriptor> mDefaultOutputDevice; // output device selected by default at boot time
-        bool mSpeakerDrcEnabled;// true on devices that use DRC on the DEVICE_CATEGORY_SPEAKER path
-                                // to boost soft sounds, used to adjust volume curves accordingly
-
-        Vector <HwModule *> mHwModules;
-        volatile int32_t mNextUniqueId;
-        volatile int32_t mAudioPortGeneration;
-
-        DefaultKeyedVector<audio_patch_handle_t, sp<AudioPatch> > mAudioPatches;
-
-#ifdef AUDIO_POLICY_TEST
-        Mutex   mLock;
-        Condition mWaitWorkCV;
-
-        int             mCurOutput;
-        bool            mDirectOutput;
-        audio_io_handle_t mTestOutputs[NUM_TEST_OUTPUTS];
-        int             mTestInput;
-        uint32_t        mTestDevice;
-        uint32_t        mTestSamplingRate;
-        uint32_t        mTestFormat;
-        uint32_t        mTestChannels;
-        uint32_t        mTestLatencyMs;
-#endif //AUDIO_POLICY_TEST
+        //parameter indicates if HDMI plug in/out detected
+        bool mHdmiAudioEvent;
 
 private:
-        static float volIndexToAmpl(audio_devices_t device, const StreamDescriptor& streamDesc,
-                int indexInUi);
-        // updates device caching and output for streams that can influence the
-        //    routing of notifications
-        void handleNotificationRoutingForStream(audio_stream_type_t stream);
-        static bool isVirtualInputDevice(audio_devices_t device);
-        uint32_t nextUniqueId();
-        uint32_t nextAudioPortGeneration();
-        uint32_t curAudioPortGeneration() const { return mAudioPortGeneration; }
-        // converts device address to string sent to audio HAL via setParameters
-        static String8 addressToParameter(audio_devices_t device, const String8 address);
-};
+        // Used for voip + voice concurrency usecase
+        int mPrevPhoneState;
+        static int mvoice_call_state;
 
 };
+};