configs/sdm710/sdm710.mk

#BOARD_USES_GENERIC_AUDIO := true
#
#AUDIO_FEATURE_FLAGS
BOARD_USES_ALSA_AUDIO := true

ifneq ($(TARGET_USES_AOSP_FOR_AUDIO), true)
AUDIO_FEATURE_ENABLED_COMPRESS_CAPTURE := false
AUDIO_FEATURE_ENABLED_COMPRESS_INPUT := true
AUDIO_FEATURE_ENABLED_COMPRESS_VOIP := false
AUDIO_FEATURE_ENABLED_DYNAMIC_ECNS := false
AUDIO_FEATURE_ENABLED_EXTN_FORMATS := true
AUDIO_FEATURE_ENABLED_EXTN_FLAC_DECODER := true
AUDIO_FEATURE_ENABLED_EXTN_RESAMPLER := true
AUDIO_FEATURE_ENABLED_FM_POWER_OPT := true
AUDIO_FEATURE_ENABLED_HDMI_SPK := true
AUDIO_FEATURE_ENABLED_PCM_OFFLOAD := true
AUDIO_FEATURE_ENABLED_PCM_OFFLOAD_24 := true
AUDIO_FEATURE_ENABLED_FLAC_OFFLOAD := true
AUDIO_FEATURE_ENABLED_VORBIS_OFFLOAD := true
AUDIO_FEATURE_ENABLED_WMA_OFFLOAD := true
AUDIO_FEATURE_ENABLED_ALAC_OFFLOAD := true
AUDIO_FEATURE_ENABLED_APE_OFFLOAD := true
AUDIO_FEATURE_ENABLED_AAC_ADTS_OFFLOAD := true
AUDIO_FEATURE_ENABLED_PROXY_DEVICE := true
AUDIO_FEATURE_ENABLED_SSR := true
AUDIO_FEATURE_ENABLED_DTS_EAGLE := false
AUDIO_FEATURE_ENABLED_DYNAMIC_LOG := true
BOARD_USES_SRS_TRUEMEDIA := false
DTS_CODEC_M_ := false
MM_AUDIO_ENABLED_SAFX := true
AUDIO_FEATURE_ENABLED_HW_ACCELERATED_EFFECTS := false
AUDIO_FEATURE_ENABLED_AUDIOSPHERE := true
AUDIO_FEATURE_ENABLED_USB_TUNNEL := true
AUDIO_FEATURE_ENABLED_A2DP_OFFLOAD := true
AUDIO_FEATURE_ENABLED_3D_AUDIO := true
AUDIO_FEATURE_ENABLED_VOICE_PRINT := false
USE_LEGACY_AUDIO_DAEMON := false
USE_LEGACY_AUDIO_MEASUREMENT := false
AUDIO_FEATURE_ENABLED_AHAL_EXT := false
DOLBY_ENABLE := false
endif

USE_XML_AUDIO_POLICY_CONF := 1
BOARD_SUPPORTS_SOUND_TRIGGER := true
AUDIO_USE_DEEP_AS_PRIMARY_OUTPUT := true
AUDIO_FEATURE_ENABLED_HIFI_AUDIO := true
AUDIO_FEATURE_ENABLED_VBAT_MONITOR := true
AUDIO_FEATURE_ENABLED_ANC_HEADSET := true
AUDIO_FEATURE_ENABLED_CUSTOMSTEREO := true
AUDIO_FEATURE_ENABLED_FLUENCE := true
AUDIO_FEATURE_ENABLED_HDMI_EDID := true
AUDIO_FEATURE_ENABLED_HDMI_PASSTHROUGH := true
AUDIO_FEATURE_ENABLED_KEEP_ALIVE := false
AUDIO_FEATURE_ENABLED_DISPLAY_PORT := true
AUDIO_FEATURE_ENABLED_DS2_DOLBY_DAP := false
AUDIO_FEATURE_ENABLED_HFP := true
AUDIO_FEATURE_ENABLED_INCALL_MUSIC := false
AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE := true
AUDIO_FEATURE_ENABLED_SPKR_PROTECTION := true
AUDIO_FEATURE_ENABLED_ACDB_LICENSE := true
AUDIO_FEATURE_ENABLED_DEV_ARBI := false
MM_AUDIO_ENABLED_FTM := true
TARGET_USES_QCOM_MM_AUDIO := true
AUDIO_FEATURE_ENABLED_SOURCE_TRACKING := true
AUDIO_FEATURE_ENABLED_GEF_SUPPORT := true
BOARD_SUPPORTS_QAHW := false
BOARD_SUPPORTS_QSTHW_API := true
AUDIO_FEATURE_ENABLED_RAS := true
AUDIO_FEATURE_ENABLED_SND_MONITOR := true
BOARD_SUPPORTS_SOUND_TRIGGER_ARM := false
AUDIO_FEATURE_ENABLED_FFV := false
AUDIO_FEATURE_ENABLED_KEEP_ALIVE_ARM_FFV := false
AUDIO_FEATURE_ENABLED_DLKM := true
AUDIO_FEATURE_ENABLED_SVA_MULTI_STAGE := true
BOARD_SUPPORTS_SOUND_TRIGGER_CPU_AFFINITY_SET := false
BOARD_SUPPORTS_FFV_EC_THREAD_RT_PRIORITY := false
##AUDIO_FEATURE_FLAGS

AUDIO_HARDWARE := audio.a2dp.default
AUDIO_HARDWARE += audio.usb.default
AUDIO_HARDWARE += audio.r_submix.default
AUDIO_HARDWARE += audio.primary.sdm710

#HAL Wrapper
AUDIO_WRAPPER := libqahw
AUDIO_WRAPPER += libqahwwrapper

#HAL Test app
AUDIO_HAL_TEST_APPS := hal_play_test
AUDIO_HAL_TEST_APPS += hal_rec_test

PRODUCT_PACKAGES += $(AUDIO_HARDWARE)
PRODUCT_PACKAGES += $(AUDIO_WRAPPER)
PRODUCT_PACKAGES += $(AUDIO_HAL_TEST_APPS)

ifeq ($(AUDIO_FEATURE_ENABLED_DLKM),true)
BOARD_VENDOR_KERNEL_MODULES := \
    $(KERNEL_MODULES_OUT)/qca_cld3_wlan.ko \
    $(KERNEL_MODULES_OUT)/audio_apr.ko \
    $(KERNEL_MODULES_OUT)/audio_wglink.ko \
    $(KERNEL_MODULES_OUT)/audio_q6_pdr.ko \
    $(KERNEL_MODULES_OUT)/audio_q6_notifier.ko \
    $(KERNEL_MODULES_OUT)/audio_adsp_loader.ko \
    $(KERNEL_MODULES_OUT)/audio_q6.ko \
    $(KERNEL_MODULES_OUT)/audio_usf.ko \
    $(KERNEL_MODULES_OUT)/audio_pinctrl_wcd.ko \
    $(KERNEL_MODULES_OUT)/audio_pinctrl_lpi.ko \
    $(KERNEL_MODULES_OUT)/audio_swr.ko \
    $(KERNEL_MODULES_OUT)/audio_wcd_core.ko \
    $(KERNEL_MODULES_OUT)/audio_swr_ctrl.ko \
    $(KERNEL_MODULES_OUT)/audio_wsa881x.ko \
    $(KERNEL_MODULES_OUT)/audio_platform.ko \
    $(KERNEL_MODULES_OUT)/audio_cpe_lsm.ko \
    $(KERNEL_MODULES_OUT)/audio_hdmi.ko \
    $(KERNEL_MODULES_OUT)/audio_stub.ko \
    $(KERNEL_MODULES_OUT)/audio_wcd9xxx.ko \
    $(KERNEL_MODULES_OUT)/audio_mbhc.ko \
    $(KERNEL_MODULES_OUT)/audio_wcd_spi.ko \
    $(KERNEL_MODULES_OUT)/audio_wcd_cpe.ko \
    $(KERNEL_MODULES_OUT)/audio_wcd9335.ko \
    $(KERNEL_MODULES_OUT)/audio_wcd934x.ko \
    $(KERNEL_MODULES_OUT)/audio_digital_cdc.ko \
    $(KERNEL_MODULES_OUT)/audio_analog_cdc.ko \
    $(KERNEL_MODULES_OUT)/audio_msm_sdw.ko \
    $(KERNEL_MODULES_OUT)/audio_native.ko \
    $(KERNEL_MODULES_OUT)/audio_machine_sdm710.ko
endif

BOARD_VENDOR_KERNEL_MODULES += \
     $(KERNEL_MODULES_OUT)/llcc_perfmon.ko

ifneq ($(strip $(TARGET_USES_RRO)), true)
#Audio Specific device overlays
DEVICE_PACKAGE_OVERLAYS += vendor/qcom/opensource/audio-hal/primary-hal/configs/common/overlay
endif

# Audio configuration file
ifeq ($(TARGET_USES_AOSP_FOR_AUDIO), true)
PRODUCT_COPY_FILES += \
    device/qcom/common/media/audio_policy.conf:vendor/etc/audio_policy.conf
else
PRODUCT_COPY_FILES += \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/audio_policy.conf:vendor/etc/audio_policy.conf
endif

PRODUCT_COPY_FILES += \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/audio_output_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_output_policy.conf \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/audio_effects.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.conf \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/audio_effects.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/mixer_paths_tavil.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_tavil.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/mixer_paths_mtp.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_mtp.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/mixer_paths_tasha.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_tasha.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/mixer_paths_tashalite.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_tashalite.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/mixer_paths_i2s.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_i2s.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/mixer_paths_skuw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_skuw.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/mixer_paths_360cam.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_360cam.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/audio_tuning_mixer.txt:$(TARGET_COPY_OUT_VENDOR)/etc/audio_tuning_mixer.txt \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/audio_tuning_mixer_tavil.txt:$(TARGET_COPY_OUT_VENDOR)/etc/audio_tuning_mixer_tavil.txt \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/audio_tuning_mixer_tasha.txt:$(TARGET_COPY_OUT_VENDOR)/etc/audio_tuning_mixer_tasha.txt \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/audio_platform_info_intcodec.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info_intcodec.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/audio_platform_info_i2s.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info_i2s.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/audio_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/audio_platform_info_skuw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info_skuw.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/sound_trigger_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_platform_info.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/sound_trigger_mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/sound_trigger_mixer_paths_skuw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths_skuw.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/sound_trigger_mixer_paths_wcd9335.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths_wcd9335.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/sound_trigger_mixer_paths_wcd9340.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths_wcd9340.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/sound_trigger_mixer_paths_wcd9340.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths_wcd9340.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/graphite_ipc_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/graphite_ipc_platform_info.xml \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/audio_configs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_configs.xml

#XML Audio configuration files
ifeq ($(USE_XML_AUDIO_POLICY_CONF), 1)
ifneq ($(TARGET_USES_AOSP_FOR_AUDIO), true)
PRODUCT_COPY_FILES += \
    $(TOPDIR)vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio/audio_policy_configuration.xml
endif
PRODUCT_COPY_FILES += \
    $(TOPDIR)vendor/qcom/opensource/audio-hal/primary-hal/configs/common/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \
    $(TOPDIR)frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_audio_policy_configuration.xml \
    $(TOPDIR)frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml \
    $(TOPDIR)frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \
    $(TOPDIR)frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \
    $(TOPDIR)frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml
endif

# Listen configuration file
PRODUCT_COPY_FILES += \
    vendor/qcom/opensource/audio-hal/primary-hal/configs/sdm710/listen_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/listen_platform_info.xml

# Reduce client buffer size for fast audio output tracks
PRODUCT_PROPERTY_OVERRIDES += \
    af.fast_track_multiplier=1

# Low latency audio buffer size in frames
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.audio_hal.period_size=192

##Ambisonic Capture
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.audio.ambisonic.capture=false \
persist.vendor.audio.ambisonic.auto.profile=false

##fluencetype can be "fluence" or "fluencepro" or "none"
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.audio.sdk.fluencetype=none\
persist.vendor.audio.fluence.voicecall=true\
persist.vendor.audio.fluence.voicerec=false\
persist.vendor.audio.fluence.speaker=true\
persist.vendor.audio.fluence.audiorec=false\
persist.vendor.audio.fluence.tmic.enabled=false

#
#snapdragon value add features
#
PRODUCT_PROPERTY_OVERRIDES += \
ro.qc.sdk.audio.ssr=false

##fluencetype can be "fluence" or "fluencepro" or "none"
PRODUCT_PROPERTY_OVERRIDES += \
ro.qc.sdk.audio.fluencetype=none\
persist.audio.fluence.voicecall=true\
persist.audio.fluence.voicerec=false\
persist.audio.fluence.speaker=true

# Mutlirec Apptype
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.audio.apptype.multirec.enabled=false \
    vendor.audio.record.multiple.enabled=false

##speaker protection v3 switch and ADSP AFE API version
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.audio.spv3.enable=true\
persist.vendor.audio.avs.afe_api_version=2

#disable tunnel encoding
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.tunnel.encode=false

#Disable RAS Feature by default
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.audio.ras.enabled=false

#Buffer size in kbytes for compress offload playback
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.offload.buffer.size.kb=64

#Minimum duration for offload playback in secs
PRODUCT_PROPERTY_OVERRIDES += \
audio.offload.min.duration.secs=30

#Enable offload audio video playback by default
PRODUCT_PROPERTY_OVERRIDES += \
audio.offload.video=true

#Enable audio track offload by default
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.offload.track.enable=true

#Enable music through deep buffer
PRODUCT_PROPERTY_OVERRIDES += \
audio.deep_buffer.media=true

#enable voice path for PCM VoIP by default
PRODUCT_PROPERTY_OVERRIDES += \
vendor.voice.path.for.pcm.voip=true

#Enable multi channel aac through offload
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.offload.multiaac.enable=true

#Enable DS2, Hardbypass feature for Dolby
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.dolby.ds2.enabled=false\
vendor.audio.dolby.ds2.hardbypass=false

#Disable Multiple offload sesison
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.offload.multiple.enabled=false

#Disable Compress passthrough playback
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.offload.passthrough=false

#Disable surround sound recording
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.audio.sdk.ssr=false

#enable dsp gapless mode by default
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.offload.gapless.enabled=true

#enable pbe effects
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.safx.pbe.enabled=true

#parser input buffer size(256kb) in byte stream mode
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.parser.ip.buffer.size=262144

#flac sw decoder 24 bit decode capability
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.flac.sw.decoder.24bit=true

#split a2dp DSP supported encoder list
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptxhd-aac-ldac

# A2DP offload support
PRODUCT_PROPERTY_OVERRIDES += \
ro.bluetooth.a2dp_offload.supported=true

# Disable A2DP offload
PRODUCT_PROPERTY_OVERRIDES += \
persist.bluetooth.a2dp_offload.disabled=false

# A2DP offload DSP supported encoder list
PRODUCT_PROPERTY_OVERRIDES += \
persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac

#enable software decoders for ALAC and APE
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.use.sw.alac.decoder=true
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.use.sw.ape.decoder=true

#enable hw aac encoder by default
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.hw.aac.encoder=true

#audio becoming noisy intent broadcast delay
PRODUCT_PROPERTY_OVERRIDES += \
audio.sys.noisy.broadcast.delay=600

#offload pausetime out duration to 3 secs to inline with other outputs
PRODUCT_PROPERTY_OVERRIDES += \
audio.sys.offload.pstimeout.secs=3

#Enable HIFI audio support for internal codec
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.audio.hifi.int_codec=true

#Set AudioFlinger client heap size
PRODUCT_PROPERTY_OVERRIDES += \
ro.af.client_heap_size_kbyte=7168

#keep alive is needed by default for ffv
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.keep_alive.disabled=false

#enable headset calibration
PRODUCT_PROPERTY_OVERRIDES += \
audio.volume.headset.gain.depcal=true

#enable dualmic fluence for voice communication
PRODUCT_PROPERTY_OVERRIDES += \
persist.audio.fluence.voicecomm=true

# for HIDL related packages
PRODUCT_PACKAGES += \
    android.hardware.audio@2.0-service \
    android.hardware.audio@2.0-impl \
    android.hardware.audio.effect@2.0-impl \
    android.hardware.soundtrigger@2.1-impl \
    android.hardware.audio@4.0 \
    android.hardware.audio.common@4.0 \
    android.hardware.audio.common@4.0-util \
    android.hardware.audio@4.0-impl \
    android.hardware.audio.effect@4.0 \
    android.hardware.audio.effect@4.0-impl

PRODUCT_PACKAGES_ENG += \
    VoicePrintTest \
    VoicePrintDemo

PRODUCT_PACKAGES_DEBUG += \
    AudioSettings