| /* |
| * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without modification, are permitted |
| * provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright notice, this list of |
| * conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright notice, this list of |
| * conditions and the following disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its contributors may be used to |
| * endorse or promote products derived from this software without specific prior written |
| * permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; |
| * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef __HW_INFO_TYPES_H__ |
| #define __HW_INFO_TYPES_H__ |
| |
| #include <stdint.h> |
| #include <core/display_interface.h> |
| #include <core/core_interface.h> |
| #include <vector> |
| #include <map> |
| #include <string> |
| #include <bitset> |
| |
| namespace sdm { |
| using std::string; |
| |
| const int kMaxSDELayers = 16; // Maximum number of layers that can be handled by MDP5 hardware |
| // in a given layer stack. |
| #define MAX_PLANES 4 |
| #define MAX_DETAIL_ENHANCE_CURVE 3 |
| #define MAJOR 28 |
| #define MINOR 16 |
| #define SDEVERSION(major, minor, hw_rev) ((major) << MAJOR) | ((minor) << MINOR) | (hw_rev) |
| |
| enum HWDeviceType { |
| kDevicePrimary, |
| kDeviceHDMI, |
| kDeviceVirtual, |
| kDeviceRotator, |
| kDeviceMax, |
| }; |
| |
| enum HWBlockType { |
| kHWPrimary, |
| kHWHDMI, |
| kHWWriteback0, |
| kHWWriteback1, |
| kHWWriteback2, |
| kHWBlockMax |
| }; |
| |
| enum HWDisplayMode { |
| kModeDefault, |
| kModeVideo, |
| kModeCommand, |
| }; |
| |
| enum PipeType { |
| kPipeTypeUnused, |
| kPipeTypeVIG, |
| kPipeTypeRGB, |
| kPipeTypeDMA, |
| kPipeTypeCursor, |
| }; |
| |
| enum HWSubBlockType { |
| kHWVIGPipe, |
| kHWRGBPipe, |
| kHWDMAPipe, |
| kHWCursorPipe, |
| kHWRotatorInput, |
| kHWRotatorOutput, |
| kHWWBIntfOutput, |
| kHWDestinationScalar, |
| kHWSubBlockMax, |
| }; |
| |
| enum HWAlphaInterpolation { |
| kInterpolationPixelRepeat, |
| kInterpolationBilinear, |
| kInterpolation2D, |
| kInterpolationMax, |
| }; |
| |
| enum HWBlendingFilter { |
| kBlendFilterCircular, |
| kBlendFilterSeparable, |
| kBlendFilterMax, |
| }; |
| |
| enum HWPipeFlags { |
| kIGC = 0x01, |
| kMultiRect = 0x02, |
| kMultiRectParallelMode = 0x04, |
| }; |
| |
| enum HWAVRModes { |
| kContinuousMode, // Mode to enable AVR feature for every frame. |
| kOneShotMode, // Mode to enable AVR feature for particular frame. |
| }; |
| |
| enum HWTopology { |
| kUnknown, |
| kSingleLM, |
| kSingleLMDSC, |
| kDualLM, |
| kDualLMDSC, |
| kDualLMMerge, |
| kDualLMMergeDSC, |
| kDualLMDSCMerge, |
| kPPSplit, |
| }; |
| |
| enum HwHdrEotf { |
| kHdrEOTFInvalid = 0, |
| kHdrEOTFSDR = 0x1, |
| kHdrEOTFHdrLumRange = 0x2, |
| kHdrEOTFHDR10 = 0x4, |
| kHdrEOTFHLG = 0x8, |
| }; |
| |
| typedef std::map<HWSubBlockType, std::vector<LayerBufferFormat>> FormatsMap; |
| typedef std::map<LayerBufferFormat, float> CompRatioMap; |
| |
| struct HWDynBwLimitInfo { |
| uint32_t cur_mode = kBwDefault; |
| uint64_t total_bw_limit[kBwModeMax] = { 0 }; |
| uint64_t pipe_bw_limit[kBwModeMax] = { 0 }; |
| }; |
| |
| struct HWPipeCaps { |
| PipeType type = kPipeTypeUnused; |
| uint32_t id = 0; |
| uint32_t master_pipe_id = 0; |
| uint32_t max_rects = 1; |
| }; |
| |
| struct HWRotatorInfo { |
| enum { ROT_TYPE_MDSS, ROT_TYPE_V4L2 }; |
| uint32_t type = ROT_TYPE_MDSS; |
| uint32_t num_rotator = 0; |
| bool has_downscale = false; |
| std::string device_path = ""; |
| float min_downscale = 2.0f; |
| bool downscale_compression = false; |
| |
| void Reset() { *this = HWRotatorInfo(); } |
| }; |
| |
| enum HWQseedStepVersion { |
| kQseed3v2, |
| kQseed3v3, |
| kQseed3v4, |
| }; |
| |
| struct HWDestScalarInfo { |
| uint32_t count = 0; |
| uint32_t max_input_width = 0; |
| uint32_t max_output_width = 0; |
| uint32_t max_scale_up = 1; |
| uint32_t prefill_lines = 4; |
| }; |
| |
| enum SmartDMARevision { |
| V1, |
| V2, |
| V2p5 |
| }; |
| |
| struct HWResourceInfo { |
| uint32_t hw_version = 0; |
| uint32_t hw_revision = 0; |
| uint32_t num_dma_pipe = 0; |
| uint32_t num_vig_pipe = 0; |
| uint32_t num_rgb_pipe = 0; |
| uint32_t num_cursor_pipe = 0; |
| uint32_t num_blending_stages = 0; |
| uint32_t num_solidfill_stages = 0; |
| uint32_t num_control = 0; |
| uint32_t num_mixer_to_disp = 0; |
| uint32_t smp_total = 0; |
| uint32_t smp_size = 0; |
| uint32_t num_smp_per_pipe = 0; |
| uint32_t max_scale_up = 1; |
| uint32_t max_scale_down = 1; |
| uint64_t max_bandwidth_low = 0; |
| uint64_t max_bandwidth_high = 0; |
| uint32_t max_mixer_width = 2048; |
| uint32_t max_pipe_width = 2048; |
| uint32_t max_scaler_pipe_width = 2560; |
| uint32_t max_cursor_size = 0; |
| uint64_t max_pipe_bw = 0; |
| uint32_t max_sde_clk = 0; |
| float clk_fudge_factor = 1.0f; |
| uint32_t macrotile_nv12_factor = 0; |
| uint32_t macrotile_factor = 0; |
| uint32_t linear_factor = 0; |
| uint32_t scale_factor = 0; |
| uint32_t extra_fudge_factor = 0; |
| uint32_t amortizable_threshold = 0; |
| uint32_t system_overhead_lines = 0; |
| bool has_bwc = false; |
| bool has_ubwc = false; |
| bool has_decimation = false; |
| bool has_macrotile = false; |
| bool has_non_scalar_rgb = false; |
| bool is_src_split = false; |
| bool has_dyn_bw_support = false; |
| bool separate_rotator = false; |
| bool has_qseed3 = false; |
| bool has_concurrent_writeback = false; |
| bool has_ppp = false; |
| bool has_excl_rect = false; |
| uint32_t writeback_index = kHWBlockMax; |
| HWDynBwLimitInfo dyn_bw_info; |
| std::vector<HWPipeCaps> hw_pipes; |
| FormatsMap supported_formats_map; |
| HWRotatorInfo hw_rot_info; |
| HWDestScalarInfo hw_dest_scalar_info; |
| bool has_avr = false; |
| bool has_hdr = false; |
| SmartDMARevision smart_dma_rev = SmartDMARevision::V1; |
| float ib_fudge_factor = 1.0f; |
| uint32_t undersized_prefill_lines = 0; |
| CompRatioMap comp_ratio_rt_map; |
| CompRatioMap comp_ratio_nrt_map; |
| uint32_t cache_size = 0; // cache size in bytes |
| HWQseedStepVersion pipe_qseed3_version = kQseed3v2; // only valid when has_qseed3=true |
| uint32_t min_prefill_lines = 0; |
| |
| void Reset() { *this = HWResourceInfo(); } |
| }; |
| |
| struct HWSplitInfo { |
| uint32_t left_split = 0; |
| uint32_t right_split = 0; |
| |
| bool operator !=(const HWSplitInfo &split_info) { |
| return ((left_split != split_info.left_split) || (right_split != split_info.right_split)); |
| } |
| |
| bool operator ==(const HWSplitInfo &split_info) { |
| return !(operator !=(split_info)); |
| } |
| }; |
| |
| enum HWS3DMode { |
| kS3DModeNone, |
| kS3DModeLR, |
| kS3DModeRL, |
| kS3DModeTB, |
| kS3DModeFP, |
| kS3DModeMax, |
| }; |
| |
| struct HWColorPrimaries { |
| uint32_t white_point[2] = {}; // White point |
| uint32_t red[2] = {}; // Red color primary |
| uint32_t green[2] = {}; // Green color primary |
| uint32_t blue[2] = {}; // Blue color primary |
| }; |
| |
| struct HWPanelOrientation { |
| bool rotation = false; |
| bool flip_horizontal = false; |
| bool flip_vertical = false; |
| }; |
| |
| struct HWPanelInfo { |
| DisplayPort port = kPortDefault; // Display port |
| HWDisplayMode mode = kModeDefault; // Display mode |
| bool partial_update = false; // Partial update feature |
| int left_align = 1; // ROI left alignment restriction |
| int width_align = 1; // ROI width alignment restriction |
| int top_align = 1; // ROI top alignment restriction |
| int height_align = 1; // ROI height alignment restriction |
| int min_roi_width = 1; // Min width needed for ROI |
| int min_roi_height = 1; // Min height needed for ROI |
| bool needs_roi_merge = false; // Merge ROI's of both the DSI's |
| bool dynamic_fps = false; // Panel Supports dynamic fps |
| bool dfps_porch_mode = false; // dynamic fps VFP or HFP mode |
| bool ping_pong_split = false; // Supports Ping pong split |
| uint32_t min_fps = 0; // Min fps supported by panel |
| uint32_t max_fps = 0; // Max fps supported by panel |
| bool is_primary_panel = false; // Panel is primary display |
| bool is_pluggable = false; // Panel is pluggable |
| HWSplitInfo split_info; // Panel split configuration |
| char panel_name[256] = {0}; // Panel name |
| HWS3DMode s3d_mode = kS3DModeNone; // Panel's current s3d mode. |
| int panel_max_brightness = 0; // Max panel brightness |
| uint32_t left_roi_count = 1; // Number if ROI supported on left panel |
| uint32_t right_roi_count = 1; // Number if ROI supported on right panel |
| bool hdr_enabled = false; // HDR feature supported |
| bool hdr_metadata_type_one = false; // Static HDR metadata type one |
| uint32_t hdr_eotf = 0; // Electro optical transfer function |
| uint32_t peak_luminance = 0; // Panel's peak luminance level |
| uint32_t average_luminance = 0; // Panel's average luminance level |
| uint32_t blackness_level = 0; // Panel's blackness level |
| HWColorPrimaries primaries = {}; // WRGB color primaries |
| HWPanelOrientation panel_orientation = {}; // Panel Orientation |
| uint32_t transfer_time_us = 0; // transfer time in micro seconds to panel's active region |
| |
| bool operator !=(const HWPanelInfo &panel_info) { |
| return ((port != panel_info.port) || (mode != panel_info.mode) || |
| (partial_update != panel_info.partial_update) || |
| (left_align != panel_info.left_align) || (width_align != panel_info.width_align) || |
| (top_align != panel_info.top_align) || (height_align != panel_info.height_align) || |
| (min_roi_width != panel_info.min_roi_width) || |
| (min_roi_height != panel_info.min_roi_height) || |
| (needs_roi_merge != panel_info.needs_roi_merge) || |
| (dynamic_fps != panel_info.dynamic_fps) || (min_fps != panel_info.min_fps) || |
| (dfps_porch_mode != panel_info.dfps_porch_mode) || |
| (ping_pong_split != panel_info.ping_pong_split) || |
| (max_fps != panel_info.max_fps) || (is_primary_panel != panel_info.is_primary_panel) || |
| (split_info != panel_info.split_info) || (s3d_mode != panel_info.s3d_mode) || |
| (left_roi_count != panel_info.left_roi_count) || |
| (right_roi_count != panel_info.right_roi_count) || |
| (transfer_time_us != panel_info.transfer_time_us)); |
| } |
| |
| bool operator ==(const HWPanelInfo &panel_info) { |
| return !(operator !=(panel_info)); |
| } |
| }; |
| |
| struct HWSessionConfig { |
| LayerRect src_rect; |
| LayerRect dst_rect; |
| uint32_t buffer_count = 0; |
| bool secure = false; |
| uint32_t frame_rate = 0; |
| LayerTransform transform; |
| bool secure_camera = false; |
| |
| bool operator==(const HWSessionConfig& config) const { |
| return (src_rect == config.src_rect && |
| dst_rect == config.dst_rect && |
| buffer_count == config.buffer_count && |
| secure == config.secure && |
| frame_rate == config.frame_rate && |
| transform == config.transform && |
| secure_camera == config.secure_camera); |
| } |
| |
| bool operator!=(const HWSessionConfig& config) const { |
| return !operator==(config); |
| } |
| }; |
| |
| enum HWRotatorMode { |
| kRotatorNone, |
| kRotatorOffline, |
| kRotatorInline |
| }; |
| |
| struct HWRotateInfo { |
| int pipe_id = -1; // Not actual pipe id, but the relative DMA id |
| int writeback_id = -1; // Writeback block id, but this is the same as DMA id |
| LayerRect src_roi; // Source crop of each split |
| LayerRect dst_roi; // Destination crop of each split |
| bool valid = false; |
| int rotate_id = -1; // Actual rotator session id with driver |
| |
| void Reset() { *this = HWRotateInfo(); } |
| }; |
| |
| struct HWRotatorSession { |
| HWRotateInfo hw_rotate_info[kMaxRotatePerLayer]; |
| uint32_t hw_block_count = 0; // number of rotator hw blocks used by rotator session |
| int session_id = -1; // A handle with Session Manager |
| HWSessionConfig hw_session_config; |
| LayerBuffer input_buffer; // Input to rotator |
| LayerBuffer output_buffer; // Output of rotator, crop width and stride are same |
| float input_compression = 1.0f; |
| float output_compression = 1.0f; |
| bool is_buffer_cached = false; |
| HWRotatorMode mode = kRotatorNone; |
| }; |
| |
| struct HWScaleLutInfo { |
| uint32_t dir_lut_size = 0; |
| uint32_t cir_lut_size = 0; |
| uint32_t sep_lut_size = 0; |
| uint64_t dir_lut = 0; |
| uint64_t cir_lut = 0; |
| uint64_t sep_lut = 0; |
| }; |
| |
| struct HWDetailEnhanceData : DisplayDetailEnhancerData { |
| uint16_t prec_shift = 0; |
| int16_t adjust_a[MAX_DETAIL_ENHANCE_CURVE] = {0}; |
| int16_t adjust_b[MAX_DETAIL_ENHANCE_CURVE] = {0}; |
| int16_t adjust_c[MAX_DETAIL_ENHANCE_CURVE] = {0}; |
| }; |
| |
| struct HWPixelExtension { |
| int32_t extension = 0; // Number of pixels extension in left, right, top and bottom directions |
| // for all color components. This pixel value for each color component |
| // should be sum of fetch and repeat pixels. |
| |
| int32_t overfetch = 0; // Number of pixels need to be overfetched in left, right, top and bottom |
| // directions from source image for scaling. |
| |
| int32_t repeat = 0; // Number of pixels need to be repeated in left, right, top and bottom |
| // directions for scaling. |
| }; |
| |
| struct HWPlane { |
| int32_t init_phase_x = 0; |
| int32_t phase_step_x = 0; |
| int32_t init_phase_y = 0; |
| int32_t phase_step_y = 0; |
| HWPixelExtension left; |
| HWPixelExtension top; |
| HWPixelExtension right; |
| HWPixelExtension bottom; |
| uint32_t roi_width = 0; |
| int32_t preload_x = 0; |
| int32_t preload_y = 0; |
| uint32_t src_width = 0; |
| uint32_t src_height = 0; |
| }; |
| |
| struct HWScaleData { |
| struct enable { |
| uint8_t scale = 0; |
| uint8_t direction_detection = 0; |
| uint8_t detail_enhance = 0; |
| } enable; |
| uint32_t dst_width = 0; |
| uint32_t dst_height = 0; |
| HWPlane plane[MAX_PLANES]; |
| // scale_v2_data fields |
| ScalingFilterConfig y_rgb_filter_cfg = kFilterEdgeDirected; |
| ScalingFilterConfig uv_filter_cfg = kFilterEdgeDirected; |
| HWAlphaInterpolation alpha_filter_cfg = kInterpolationPixelRepeat; |
| HWBlendingFilter blend_cfg = kBlendFilterCircular; |
| |
| struct lut_flags { |
| uint8_t lut_swap = 0; |
| uint8_t lut_dir_wr = 0; |
| uint8_t lut_y_cir_wr = 0; |
| uint8_t lut_uv_cir_wr = 0; |
| uint8_t lut_y_sep_wr = 0; |
| uint8_t lut_uv_sep_wr = 0; |
| } lut_flag; |
| |
| uint32_t dir_lut_idx = 0; |
| /* for Y(RGB) and UV planes*/ |
| uint32_t y_rgb_cir_lut_idx = 0; |
| uint32_t uv_cir_lut_idx = 0; |
| uint32_t y_rgb_sep_lut_idx = 0; |
| uint32_t uv_sep_lut_idx = 0; |
| |
| HWDetailEnhanceData detail_enhance; |
| }; |
| |
| struct HWDestScaleInfo { |
| uint32_t mixer_width = 0; |
| uint32_t mixer_height = 0; |
| bool scale_update = false; |
| HWScaleData scale_data = {}; |
| LayerRect panel_roi = {}; |
| }; |
| |
| typedef std::map<uint32_t, HWDestScaleInfo *> DestScaleInfoMap; |
| |
| struct HWAVRInfo { |
| bool enable = false; // Flag to Enable AVR feature |
| HWAVRModes mode = kContinuousMode; // Specifies the AVR mode |
| }; |
| |
| struct HWPipeInfo { |
| HWPipeInfo *pair = NULL; |
| uint8_t rect = 255; |
| uint32_t pipe_id = 0; |
| HWSubBlockType sub_block_type = kHWSubBlockMax; |
| LayerRect src_roi; |
| LayerRect dst_roi; |
| LayerRect excl_rect; // exclusion rectangle per pipe rectangle |
| uint8_t horizontal_decimation = 0; |
| uint8_t vertical_decimation = 0; |
| HWScaleData scale_data; |
| uint32_t z_order = 0; |
| uint8_t flags = 0; |
| bool valid = false; |
| bool is_virtual = 0; |
| |
| void Reset() { *this = HWPipeInfo(); } |
| }; |
| |
| struct HWSolidfillStage { |
| uint32_t z_order = kMaxSDELayers; |
| uint32_t color = 0; |
| LayerRect roi = {}; |
| bool is_exclusion_rect = false; |
| LayerSolidFill solid_fill_info = {}; |
| }; |
| |
| struct HWLayerConfig { |
| HWPipeInfo left_pipe; // pipe for left side of output |
| HWPipeInfo right_pipe; // pipe for right side of output |
| HWRotatorSession hw_rotator_session; |
| HWSolidfillStage hw_solidfill_stage; |
| |
| float compression = 1.0f; |
| bool use_solidfill_stage = false; |
| |
| void Reset() { *this = HWLayerConfig(); } |
| }; |
| |
| struct HWHDRLayerInfo { |
| enum HDROperation { |
| kNoOp, // No-op. |
| kSet, // Sets the HDR MetaData - Start of HDR |
| kReset, // resets the previously set HDR Metadata, End of HDR |
| }; |
| |
| int32_t layer_index = -1; |
| HDROperation operation = kNoOp; |
| }; |
| |
| struct LayerExt { |
| std::vector<LayerRect> excl_rects = {}; // list of exclusion rects |
| }; |
| |
| struct HWLayersInfo { |
| LayerStack *stack = NULL; // Input layer stack. Set by the caller. |
| uint32_t app_layer_count = 0; // Total number of app layers. Must not be 0. |
| uint32_t gpu_target_index = 0; // GPU target layer index. 0 if not present. |
| |
| std::vector<Layer> hw_layers = {}; // Layers which need to be programmed on the HW |
| std::vector<LayerExt> layer_exts = {}; // Extention layer having list of |
| // exclusion rectangles for each layer |
| |
| std::vector<uint32_t> index; // Indexes of the layers from the layer stack which need to |
| // be programmed on hardware. |
| std::vector<uint32_t> roi_index; // Stores the ROI index where the layers are visible. |
| |
| int sync_handle = -1; // Release fence id for current draw cycle. |
| int set_idle_time_ms = -1; // Set idle time to the new specified value. |
| // -1 indicates no change in idle time since last set value. |
| |
| std::vector<LayerRect> left_frame_roi = {}; // Left ROI. |
| std::vector<LayerRect> right_frame_roi = {}; // Right ROI. |
| LayerRect partial_fb_roi = {}; // Damaged area in framebuffer. |
| bool roi_split = false; // Indicates separated left and right ROI |
| bool async_cursor_updates = false; // Cursor layer allowed to have async updates |
| DestScaleInfoMap dest_scale_info_map = {}; |
| HWHDRLayerInfo hdr_layer_info = {}; |
| Handle pvt_data = NULL; // Private data used by sdm extension only. |
| }; |
| |
| struct HWQosData { |
| uint64_t core_ab_bps = 0; |
| uint64_t core_ib_bps = 0; |
| uint64_t llcc_ab_bps = 0; |
| uint64_t llcc_ib_bps = 0; |
| uint64_t dram_ab_bps = 0; |
| uint64_t dram_ib_bps = 0; |
| uint64_t rot_prefill_bw_bps = 0; |
| uint32_t clock_hz = 0; |
| uint32_t rot_clock_hz = 0; |
| }; |
| |
| struct HWLayers { |
| HWLayersInfo info; |
| HWLayerConfig config[kMaxSDELayers]; |
| float output_compression = 1.0f; |
| HWQosData qos_data = {}; |
| HWAVRInfo hw_avr_info = {}; |
| }; |
| |
| struct HWDisplayAttributes : DisplayConfigVariableInfo { |
| bool is_device_split = false; |
| uint32_t v_front_porch = 0; //!< Vertical front porch of panel |
| uint32_t v_back_porch = 0; //!< Vertical back porch of panel |
| uint32_t v_pulse_width = 0; //!< Vertical pulse width of panel |
| uint32_t h_total = 0; //!< Total width of panel (hActive + hFP + hBP + hPulseWidth) |
| uint32_t v_total = 0; //!< Total height of panel (vActive + vFP + vBP + vPulseWidth) |
| std::bitset<32> s3d_config; //!< Stores the bit mask of S3D modes |
| uint32_t clock_khz = 0; //!< Stores the pixel clock of panel in khz |
| HWTopology topology = kUnknown; //!< Stores the topology information. |
| |
| void Reset() { *this = HWDisplayAttributes(); } |
| |
| bool operator !=(const HWDisplayAttributes &display_attributes) { |
| return ((is_device_split != display_attributes.is_device_split) || |
| (x_pixels != display_attributes.x_pixels) || |
| (y_pixels != display_attributes.y_pixels) || |
| (x_dpi != display_attributes.x_dpi) || |
| (y_dpi != display_attributes.y_dpi) || |
| (fps != display_attributes.fps) || |
| (vsync_period_ns != display_attributes.vsync_period_ns) || |
| (v_front_porch != display_attributes.v_front_porch) || |
| (v_back_porch != display_attributes.v_back_porch) || |
| (v_pulse_width != display_attributes.v_pulse_width) || |
| (h_total != display_attributes.h_total) || |
| (is_yuv != display_attributes.is_yuv) || |
| (s3d_config != display_attributes.s3d_config) || |
| (clock_khz != display_attributes.clock_khz) || |
| (topology != display_attributes.topology)); |
| } |
| |
| bool operator ==(const HWDisplayAttributes &display_attributes) { |
| return !(operator !=(display_attributes)); |
| } |
| }; |
| |
| struct HWMixerAttributes { |
| uint32_t width = 0; // Layer mixer width |
| uint32_t height = 0; // Layer mixer height |
| uint32_t split_left = 0; |
| LayerBufferFormat output_format = kFormatRGB101010; // Layer mixer output format |
| |
| bool operator !=(const HWMixerAttributes &mixer_attributes) { |
| return ((width != mixer_attributes.width) || |
| (height != mixer_attributes.height) || |
| (output_format != mixer_attributes.output_format) || |
| (split_left != mixer_attributes.split_left)); |
| } |
| |
| bool operator ==(const HWMixerAttributes &mixer_attributes) { |
| return !(operator !=(mixer_attributes)); |
| } |
| |
| bool IsValid() { |
| return (width > 0 && height > 0); |
| } |
| }; |
| |
| } // namespace sdm |
| |
| #endif // __HW_INFO_TYPES_H__ |
| |