config/display-product.mk

# Display product definitions
PRODUCT_PACKAGES += \
    android.hardware.graphics.composer@2.3-impl \
    android.hardware.graphics.composer@2.3-service \
    android.hardware.graphics.mapper@2.0-impl-qti-display \
    vendor.qti.hardware.display.allocator@1.0-service \
    android.hardware.memtrack@1.0-impl \
    android.hardware.memtrack@1.0-service \
    android.hardware.light@2.0-impl \
    android.hardware.light@2.0-service \
    gralloc.$(TARGET_BOARD_PLATFORM) \
    lights.$(TARGET_BOARD_PLATFORM) \
    hwcomposer.$(TARGET_BOARD_PLATFORM) \
    memtrack.$(TARGET_BOARD_PLATFORM) \
    libqdMetaData \
    vendor.display.config@1.0.vendor \
    vendor.display.config@1.1.vendor \
    vendor.display.config@1.2.vendor \
    vendor.display.config@1.3.vendor \
    vendor.display.config@1.4.vendor \
    vendor.display.config@1.5.vendor \
    vendor.display.config@1.6.vendor \
    vendor.display.config@1.7.vendor \
    vendor.display.config@1.8.vendor \
    modetest

#QDCM calibration xml file for 2k panel
PRODUCT_COPY_FILES += hardware/qcom/display/config/qdcm_calib_data_nt35597_cmd_mode_dsi_truly_panel_with_DSC.xml:$(TARGET_COPY_OUT_VENDOR)/etc/qdcm_calib_data_nt35597_cmd_mode_dsi_truly_panel_with_DSC.xml
PRODUCT_COPY_FILES += hardware/qcom/display/config/qdcm_calib_data_nt35597_cmd_mode_dsi_truly_panel_with_DSC.xml:$(TARGET_COPY_OUT_VENDOR)/etc/qdcm_calib_data_nt35597_video_mode_dsi_truly_panel_with_DSC.xml
#QDCM calibration xml file for 4k panel
PRODUCT_COPY_FILES += hardware/qcom/display/config/qdcm_calib_data_Sharp_4k_cmd_mode_dsc_dsi_panel.xml:$(TARGET_COPY_OUT_VENDOR)/etc/qdcm_calib_data_Sharp_4k_cmd_mode_dsc_dsi_panel.xml
PRODUCT_COPY_FILES += hardware/qcom/display/config/qdcm_calib_data_Sharp_4k_cmd_mode_dsc_dsi_panel.xml:$(TARGET_COPY_OUT_VENDOR)/etc/qdcm_calib_data_Sharp_4k_video_mode_dsc_dsi_panel.xml
#QDCM calibration xml file for amoled panel
PRODUCT_COPY_FILES += hardware/qcom/display/config/qdcm_calib_data_sw43404_amoled_cmd_mode_dsi_boe_panel_with_DSC.xml:$(TARGET_COPY_OUT_VENDOR)/etc/qdcm_calib_data_sw43404_amoled_cmd_mode_dsi_boe_panel_with_DSC.xml
PRODUCT_COPY_FILES += hardware/qcom/display/config/qdcm_calib_data_sw43404_amoled_cmd_mode_dsi_boe_panel_with_DSC.xml:$(TARGET_COPY_OUT_VENDOR)/etc/qdcm_calib_data_sw43404_amoled_video_mode_dsi_boe_panel_with_DSC.xml

PRODUCT_PROPERTY_OVERRIDES += \
    persist.demo.hdmirotationlock=false \
    persist.sys.sf.color_saturation=1.0 \
    debug.sf.hw=0 \
    debug.egl.hw=0 \
    debug.sf.latch_unsignaled=1 \
    debug.mdpcomp.logs=0 \
    vendor.gralloc.disable_ubwc=0 \
    vendor.display.disable_scaler=0 \
    vendor.display.disable_offline_rotator=1 \
    vendor.display.disable_excl_rect=0 \
    vendor.display.comp_mask=0 \
    vendor.display.enable_default_color_mode=1 \
    vendor.display.enable_posted_start_dyn=1 \
    vendor.display.use_smooth_motion=1

#Set WCG properties
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_wide_color_display=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_HDR_display=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.use_color_management=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.wcg_composition_dataspace=143261696

ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
# Recovery is enabled, logging is enabled
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.display.disable_hw_recovery_dump=0
else
# Recovery is enabled, logging is disabled
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.display.disable_hw_recovery_dump=1
endif

QMAA_ENABLED_HAL_MODULES += display
ifeq ($(TARGET_USES_QMAA),true)
ifeq ($(TARGET_USES_QMAA_OVERRIDE_DISPLAY),true)
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.display.enable_null_display=0
else
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.display.enable_null_display=1
endif
endif

# Properties using default value:
#    vendor.display.disable_hw_recovery=0

# This matrix should be in column major order, per SurfaceFlinger requirement
#  1.0   0.0   0.0
#  0.0   1.0   0.0
#  0.0   0.0   1.0
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.display.dataspace_saturation_matrix=1.0,0.0,0.0,0.0,1.0,0.0,0.0,0.0,1.0