Add nfc HAL 1.1
Test: compiles,basic tests
Change-Id: I1dd059c80ecb855f0b8fa1528f2eb0e63013de9c
diff --git a/st21nfc/hal_wrapper.cc b/st21nfc/hal_wrapper.cc
new file mode 100644
index 0000000..5df1614
--- /dev/null
+++ b/st21nfc/hal_wrapper.cc
@@ -0,0 +1,200 @@
+/******************************************************************************
+ *
+ * Copyright (C) 2017 ST Microelectronics S.A.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ *
+ ******************************************************************************/
+#define LOG_TAG "NfcNciHalWrapper"
+#include <cutils/properties.h>
+#include <errno.h>
+#include <hardware/nfc.h>
+#include <string.h>
+#include "android_logmsg.h"
+#include "halcore.h"
+
+extern void HalCoreCallback(void* context, uint32_t event, const void* d,
+ size_t length);
+extern bool I2cOpenLayer(void* dev, HAL_CALLBACK callb, HALHANDLE* pHandle);
+extern void I2cCloseLayer();
+
+typedef struct {
+ struct nfc_nci_device nci_device; // nci_device must be first struct member
+ // below declarations are private variables within HAL
+ nfc_stack_callback_t* p_cback;
+ nfc_stack_data_callback_t* p_data_cback;
+ HALHANDLE hHAL;
+} st21nfc_dev_t;
+
+typedef enum {
+ HAL_WRAPPER_STATE_CLOSED,
+ HAL_WRAPPER_STATE_OPEN,
+ HAL_WRAPPER_STATE_OPEN_CPLT,
+ HAL_WRAPPER_STATE_NFC_ENABLE_ON,
+ HAL_WRAPPER_STATE_READY
+} hal_wrapper_state_e;
+
+static void halWrapperDataCallback(uint16_t data_len, uint8_t* p_data);
+static void halWrapperCallback(uint8_t event, uint8_t event_status);
+
+nfc_stack_callback_t* mHalWrapperCallback = NULL;
+nfc_stack_data_callback_t* mHalWrapperDataCallback = NULL;
+hal_wrapper_state_e mHalWrapperState = HAL_WRAPPER_STATE_CLOSED;
+HALHANDLE mHalHandle = NULL;
+
+bool hal_wrapper_open(st21nfc_dev_t* dev, nfc_stack_callback_t* p_cback,
+ nfc_stack_data_callback_t* p_data_cback,
+ HALHANDLE* pHandle) {
+ bool result;
+
+ STLOG_HAL_D("%s", __func__);
+
+ mHalWrapperState = HAL_WRAPPER_STATE_OPEN;
+
+ mHalWrapperCallback = p_cback;
+ mHalWrapperDataCallback = p_data_cback;
+
+ dev->p_data_cback = halWrapperDataCallback;
+ dev->p_cback = halWrapperCallback;
+
+ result = I2cOpenLayer(dev, HalCoreCallback, pHandle);
+
+ if (!result || !(*pHandle)) {
+ return -1; // We are doomed, stop it here, NOW !
+ }
+
+ mHalHandle = *pHandle;
+
+ return 1;
+}
+
+int hal_wrapper_close(int call_cb) {
+
+ STLOG_HAL_D("%s", __func__);
+
+ mHalWrapperState = HAL_WRAPPER_STATE_CLOSED;
+ I2cCloseLayer();
+ if (call_cb)
+ mHalWrapperCallback(HAL_NFC_CLOSE_CPLT_EVT, HAL_NFC_STATUS_OK);
+
+ return 1;
+}
+
+void halWrapperDataCallback(uint16_t data_len, uint8_t* p_data) {
+ uint8_t propNfcModeSetCmdOn[] = {0x2f, 0x02, 0x02, 0x02, 0x01};
+ uint8_t coreInitCmd[] = {0x20, 0x01, 0x02, 0x00, 0x00};
+
+ STLOG_HAL_D("%s - mHalWrapperState = %d", __func__, mHalWrapperState);
+
+ switch (mHalWrapperState) {
+ case HAL_WRAPPER_STATE_CLOSED: // 0
+ break;
+ case HAL_WRAPPER_STATE_OPEN: // 1
+ // CORE_RESET_NTF
+ if ((p_data[0] == 0x60) && (p_data[1] == 0x00)) {
+ if (p_data[3] == 0x01) {
+ mHalWrapperCallback(HAL_NFC_OPEN_CPLT_EVT, HAL_NFC_STATUS_OK);
+ mHalWrapperState = HAL_WRAPPER_STATE_OPEN_CPLT;
+ } else if (p_data[3] == 0xa1) // Loader mode
+ {
+ mHalWrapperCallback(HAL_NFC_OPEN_CPLT_EVT, HAL_NFC_STATUS_FAILED);
+ }
+ } else {
+ mHalWrapperDataCallback(data_len, p_data);
+ }
+ break;
+ case HAL_WRAPPER_STATE_OPEN_CPLT: // 2
+ // CORE_INIT_RSP
+ if ((p_data[0] == 0x40) && (p_data[1] == 0x01)) {
+ } else if ((p_data[0] == 0x60) && (p_data[1] == 0x06)) {
+ STLOG_HAL_D("%s - Sending PROP_NFC_MODE_SET_CMD", __func__);
+ // Send PROP_NFC_MODE_SET_CMD(ON)
+ if (!HalSendDownstreamTimer(mHalHandle, propNfcModeSetCmdOn,
+ sizeof(propNfcModeSetCmdOn), 100)) {
+ STLOG_HAL_E("NFC-NCI HAL: %s HalSendDownstreamTimer failed", __func__);
+ }
+ mHalWrapperState = HAL_WRAPPER_STATE_NFC_ENABLE_ON;
+ } else {
+ mHalWrapperDataCallback(data_len, p_data);
+ }
+ break;
+ case HAL_WRAPPER_STATE_NFC_ENABLE_ON: // 3
+ // PROP_NFC_MODE_SET_RSP
+ if ((p_data[0] == 0x4f) && (p_data[1] == 0x02)) {
+ // DO nothing: wait for core_reset_ntf or timer timeout
+ }
+ // CORE_RESET_NTF
+ else if ((p_data[0] == 0x60) && (p_data[1] == 0x00)) {
+ // Stop timer
+ HalSendDownstreamStopTimer(mHalHandle);
+
+ // Send CORE_INIT_CMD
+ STLOG_HAL_D("%s - Sending CORE_INIT_CMD", __func__);
+ if (!HalSendDownstream(mHalHandle, coreInitCmd, sizeof(coreInitCmd))) {
+ STLOG_HAL_E("NFC-NCI HAL: %s SendDownstream failed", __func__);
+ }
+ }
+ // CORE_INIT_RSP
+ else if ((p_data[0] == 0x40) && (p_data[1] == 0x01)) {
+ STLOG_HAL_D("%s - NFC mode enabled", __func__);
+ mHalWrapperState = HAL_WRAPPER_STATE_READY;
+ mHalWrapperDataCallback(data_len, p_data);
+ }
+ break;
+ case HAL_WRAPPER_STATE_READY:
+ if (!((p_data[0] == 0x60) && (p_data[3] == 0xa0)))
+ {
+ mHalWrapperDataCallback(data_len, p_data);
+ }
+ else {
+ STLOG_HAL_D("%s - Core reset notification - Nfc mode ", __func__);
+ }
+ break;
+ }
+}
+
+static void halWrapperCallback(uint8_t event, uint8_t event_status) {
+ uint8_t coreInitCmd[] = {0x20, 0x01, 0x02, 0x00, 0x00};
+
+ switch (mHalWrapperState) {
+ case HAL_WRAPPER_STATE_CLOSED:
+ break;
+
+ case HAL_WRAPPER_STATE_OPEN:
+ break;
+
+ case HAL_WRAPPER_STATE_OPEN_CPLT:
+ break;
+
+ case HAL_WRAPPER_STATE_NFC_ENABLE_ON:
+ if (event == HAL_WRAPPER_TIMEOUT_EVT) {
+ // timeout
+ // Send CORE_INIT_CMD
+ STLOG_HAL_D("%s - Sending CORE_INIT_CMD", __func__);
+ if (!HalSendDownstream(mHalHandle, coreInitCmd, sizeof(coreInitCmd))) {
+ STLOG_HAL_E("NFC-NCI HAL: %s SendDownstream failed", __func__);
+ }
+ return;
+ }
+ break;
+
+ case HAL_WRAPPER_STATE_READY:
+ break;
+
+ default:
+ break;
+ }
+
+ mHalWrapperCallback(event, event_status);
+}