| # |
| # This is the "master security properties file". |
| # |
| # An alternate java.security properties file may be specified |
| # from the command line via the system property |
| # |
| # -Djava.security.properties=<URL> |
| # |
| # This properties file appends to the master security properties file. |
| # If both properties files specify values for the same key, the value |
| # from the command-line properties file is selected, as it is the last |
| # one loaded. |
| # |
| # Also, if you specify |
| # |
| # -Djava.security.properties==<URL> (2 equals), |
| # |
| # then that properties file completely overrides the master security |
| # properties file. |
| # |
| # To disable the ability to specify an additional properties file from |
| # the command line, set the key security.overridePropertiesFile |
| # to false in the master security properties file. It is set to true |
| # by default. |
| |
| # In this file, various security properties are set for use by |
| # java.security classes. This is where users can statically register |
| # Cryptography Package Providers ("providers" for short). The term |
| # "provider" refers to a package or set of packages that supply a |
| # concrete implementation of a subset of the cryptography aspects of |
| # the Java Security API. A provider may, for example, implement one or |
| # more digital signature algorithms or message digest algorithms. |
| # |
| # Each provider must implement a subclass of the Provider class. |
| # To register a provider in this master security properties file, |
| # specify the Provider subclass name and priority in the format |
| # |
| # security.provider.<n>=<className> |
| # |
| # This declares a provider, and specifies its preference |
| # order n. The preference order is the order in which providers are |
| # searched for requested algorithms (when no specific provider is |
| # requested). The order is 1-based; 1 is the most preferred, followed |
| # by 2, and so on. |
| # |
| # <className> must specify the subclass of the Provider class whose |
| # constructor sets the values of various properties that are required |
| # for the Java Security API to look up the algorithms or other |
| # facilities implemented by the provider. |
| # |
| # There must be at least one provider specification in java.security. |
| # There is a default provider that comes standard with the JDK. It |
| # is called the "SUN" provider, and its Provider subclass |
| # named Sun appears in the sun.security.provider package. Thus, the |
| # "SUN" provider is registered via the following: |
| # |
| # security.provider.1=sun.security.provider.Sun |
| # |
| # (The number 1 is used for the default provider.) |
| # |
| # Note: Providers can be dynamically registered instead by calls to |
| # either the addProvider or insertProviderAt method in the Security |
| # class. |
| |
| # |
| # List of providers and their preference orders (see above): |
| # |
| security.provider.1=sun.security.provider.Sun |
| security.provider.2=sun.security.rsa.SunRsaSign |
| security.provider.3=sun.security.ec.SunEC |
| security.provider.4=com.sun.net.ssl.internal.ssl.Provider |
| security.provider.5=com.sun.crypto.provider.SunJCE |
| security.provider.6=sun.security.jgss.SunProvider |
| security.provider.7=com.sun.security.sasl.Provider |
| security.provider.8=org.jcp.xml.dsig.internal.dom.XMLDSigRI |
| security.provider.9=sun.security.smartcardio.SunPCSC |
| security.provider.10=apple.security.AppleProvider |
| |
| # |
| # Select the source of seed data for SecureRandom. By default an |
| # attempt is made to use the entropy gathering device specified by |
| # the securerandom.source property. If an exception occurs when |
| # accessing the URL then the traditional system/thread activity |
| # algorithm is used. |
| # |
| # On Solaris and Linux systems, if file:/dev/urandom is specified and it |
| # exists, a special SecureRandom implementation is activated by default. |
| # This "NativePRNG" reads random bytes directly from /dev/urandom. |
| # |
| # On Windows systems, the URLs file:/dev/random and file:/dev/urandom |
| # enables use of the Microsoft CryptoAPI seed functionality. |
| # |
| securerandom.source=file:/dev/urandom |
| # |
| # The entropy gathering device is described as a URL and can also |
| # be specified with the system property "java.security.egd". For example, |
| # -Djava.security.egd=file:/dev/urandom |
| # Specifying this system property will override the securerandom.source |
| # setting. |
| |
| # |
| # Class to instantiate as the javax.security.auth.login.Configuration |
| # provider. |
| # |
| login.configuration.provider=com.sun.security.auth.login.ConfigFile |
| |
| # |
| # Default login configuration file |
| # |
| #login.config.url.1=file:${user.home}/.java.login.config |
| |
| # |
| # Class to instantiate as the system Policy. This is the name of the class |
| # that will be used as the Policy object. |
| # |
| policy.provider=sun.security.provider.PolicyFile |
| |
| # The default is to have a single system-wide policy file, |
| # and a policy file in the user's home directory. |
| policy.url.1=file:${java.home}/lib/security/java.policy |
| policy.url.2=file:${user.home}/.java.policy |
| |
| # whether or not we expand properties in the policy file |
| # if this is set to false, properties (${...}) will not be expanded in policy |
| # files. |
| policy.expandProperties=true |
| |
| # whether or not we allow an extra policy to be passed on the command line |
| # with -Djava.security.policy=somefile. Comment out this line to disable |
| # this feature. |
| policy.allowSystemProperty=true |
| |
| # whether or not we look into the IdentityScope for trusted Identities |
| # when encountering a 1.1 signed JAR file. If the identity is found |
| # and is trusted, we grant it AllPermission. |
| policy.ignoreIdentityScope=false |
| |
| # |
| # Default keystore type. |
| # |
| keystore.type=jks |
| |
| # |
| # List of comma-separated packages that start with or equal this string |
| # will cause a security exception to be thrown when |
| # passed to checkPackageAccess unless the |
| # corresponding RuntimePermission ("accessClassInPackage."+package) has |
| # been granted. |
| package.access=sun.,\ |
| com.sun.xml.internal.bind.,\ |
| com.sun.xml.internal.org.jvnet.staxex.,\ |
| com.sun.xml.internal.ws.,\ |
| com.sun.imageio.,\ |
| com.sun.istack.internal.,\ |
| com.sun.jmx.,\ |
| com.sun.proxy.,\ |
| com.sun.org.apache.xerces.internal.utils.,\ |
| com.sun.org.apache.xalan.internal.utils.,\ |
| com.sun.org.glassfish.,\ |
| jdk.internal.,\ |
| apple. |
| |
| # |
| # List of comma-separated packages that start with or equal this string |
| # will cause a security exception to be thrown when |
| # passed to checkPackageDefinition unless the |
| # corresponding RuntimePermission ("defineClassInPackage."+package) has |
| # been granted. |
| # |
| # by default, none of the class loaders supplied with the JDK call |
| # checkPackageDefinition. |
| # |
| package.definition=sun.,\ |
| com.sun.xml.internal.bind.,\ |
| com.sun.xml.internal.org.jvnet.staxex.,\ |
| com.sun.xml.internal.ws.,\ |
| com.sun.imageio.,\ |
| com.sun.istack.internal.,\ |
| com.sun.jmx.,\ |
| com.sun.proxy.,\ |
| com.sun.org.apache.xerces.internal.utils.,\ |
| com.sun.org.apache.xalan.internal.utils.,\ |
| com.sun.org.glassfish.,\ |
| jdk.internal.,\ |
| apple. |
| |
| # |
| # Determines whether this properties file can be appended to |
| # or overridden on the command line via -Djava.security.properties |
| # |
| security.overridePropertiesFile=true |
| |
| # |
| # Determines the default key and trust manager factory algorithms for |
| # the javax.net.ssl package. |
| # |
| ssl.KeyManagerFactory.algorithm=SunX509 |
| ssl.TrustManagerFactory.algorithm=PKIX |
| |
| # |
| # The Java-level namelookup cache policy for successful lookups: |
| # |
| # any negative value: caching forever |
| # any positive value: the number of seconds to cache an address for |
| # zero: do not cache |
| # |
| # default value is forever (FOREVER). For security reasons, this |
| # caching is made forever when a security manager is set. When a security |
| # manager is not set, the default behavior in this implementation |
| # is to cache for 30 seconds. |
| # |
| # NOTE: setting this to anything other than the default value can have |
| # serious security implications. Do not set it unless |
| # you are sure you are not exposed to DNS spoofing attack. |
| # |
| #networkaddress.cache.ttl=-1 |
| |
| # The Java-level namelookup cache policy for failed lookups: |
| # |
| # any negative value: cache forever |
| # any positive value: the number of seconds to cache negative lookup results |
| # zero: do not cache |
| # |
| # In some Microsoft Windows networking environments that employ |
| # the WINS name service in addition to DNS, name service lookups |
| # that fail may take a noticeably long time to return (approx. 5 seconds). |
| # For this reason the default caching policy is to maintain these |
| # results for 10 seconds. |
| # |
| # |
| networkaddress.cache.negative.ttl=10 |
| |
| # |
| # Properties to configure OCSP for certificate revocation checking |
| # |
| |
| # Enable OCSP |
| # |
| # By default, OCSP is not used for certificate revocation checking. |
| # This property enables the use of OCSP when set to the value "true". |
| # |
| # NOTE: SocketPermission is required to connect to an OCSP responder. |
| # |
| # Example, |
| # ocsp.enable=true |
| |
| # |
| # Location of the OCSP responder |
| # |
| # By default, the location of the OCSP responder is determined implicitly |
| # from the certificate being validated. This property explicitly specifies |
| # the location of the OCSP responder. The property is used when the |
| # Authority Information Access extension (defined in RFC 3280) is absent |
| # from the certificate or when it requires overriding. |
| # |
| # Example, |
| # ocsp.responderURL=http://ocsp.example.net:80 |
| |
| # |
| # Subject name of the OCSP responder's certificate |
| # |
| # By default, the certificate of the OCSP responder is that of the issuer |
| # of the certificate being validated. This property identifies the certificate |
| # of the OCSP responder when the default does not apply. Its value is a string |
| # distinguished name (defined in RFC 2253) which identifies a certificate in |
| # the set of certificates supplied during cert path validation. In cases where |
| # the subject name alone is not sufficient to uniquely identify the certificate |
| # then both the "ocsp.responderCertIssuerName" and |
| # "ocsp.responderCertSerialNumber" properties must be used instead. When this |
| # property is set then those two properties are ignored. |
| # |
| # Example, |
| # ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp" |
| |
| # |
| # Issuer name of the OCSP responder's certificate |
| # |
| # By default, the certificate of the OCSP responder is that of the issuer |
| # of the certificate being validated. This property identifies the certificate |
| # of the OCSP responder when the default does not apply. Its value is a string |
| # distinguished name (defined in RFC 2253) which identifies a certificate in |
| # the set of certificates supplied during cert path validation. When this |
| # property is set then the "ocsp.responderCertSerialNumber" property must also |
| # be set. When the "ocsp.responderCertSubjectName" property is set then this |
| # property is ignored. |
| # |
| # Example, |
| # ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp" |
| |
| # |
| # Serial number of the OCSP responder's certificate |
| # |
| # By default, the certificate of the OCSP responder is that of the issuer |
| # of the certificate being validated. This property identifies the certificate |
| # of the OCSP responder when the default does not apply. Its value is a string |
| # of hexadecimal digits (colon or space separators may be present) which |
| # identifies a certificate in the set of certificates supplied during cert path |
| # validation. When this property is set then the "ocsp.responderCertIssuerName" |
| # property must also be set. When the "ocsp.responderCertSubjectName" property |
| # is set then this property is ignored. |
| # |
| # Example, |
| # ocsp.responderCertSerialNumber=2A:FF:00 |
| |
| # |
| # Policy for failed Kerberos KDC lookups: |
| # |
| # When a KDC is unavailable (network error, service failure, etc), it is |
| # put inside a blacklist and accessed less often for future requests. The |
| # value (case-insensitive) for this policy can be: |
| # |
| # tryLast |
| # KDCs in the blacklist are always tried after those not on the list. |
| # |
| # tryLess[:max_retries,timeout] |
| # KDCs in the blacklist are still tried by their order in the configuration, |
| # but with smaller max_retries and timeout values. max_retries and timeout |
| # are optional numerical parameters (default 1 and 5000, which means once |
| # and 5 seconds). Please notes that if any of the values defined here is |
| # more than what is defined in krb5.conf, it will be ignored. |
| # |
| # Whenever a KDC is detected as available, it is removed from the blacklist. |
| # The blacklist is reset when krb5.conf is reloaded. You can add |
| # refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is |
| # reloaded whenever a JAAS authentication is attempted. |
| # |
| # Example, |
| # krb5.kdc.bad.policy = tryLast |
| # krb5.kdc.bad.policy = tryLess:2,2000 |
| krb5.kdc.bad.policy = tryLast |
| |
| # Algorithm restrictions for certification path (CertPath) processing |
| # |
| # In some environments, certain algorithms or key lengths may be undesirable |
| # for certification path building and validation. For example, "MD2" is |
| # generally no longer considered to be a secure hash algorithm. This section |
| # describes the mechanism for disabling algorithms based on algorithm name |
| # and/or key length. This includes algorithms used in certificates, as well |
| # as revocation information such as CRLs and signed OCSP Responses. |
| # |
| # The syntax of the disabled algorithm string is described as this Java |
| # BNF-style: |
| # DisabledAlgorithms: |
| # " DisabledAlgorithm { , DisabledAlgorithm } " |
| # |
| # DisabledAlgorithm: |
| # AlgorithmName [Constraint] |
| # |
| # AlgorithmName: |
| # (see below) |
| # |
| # Constraint: |
| # KeySizeConstraint |
| # |
| # KeySizeConstraint: |
| # keySize Operator DecimalInteger |
| # |
| # Operator: |
| # <= | < | == | != | >= | > |
| # |
| # DecimalInteger: |
| # DecimalDigits |
| # |
| # DecimalDigits: |
| # DecimalDigit {DecimalDigit} |
| # |
| # DecimalDigit: one of |
| # 1 2 3 4 5 6 7 8 9 0 |
| # |
| # The "AlgorithmName" is the standard algorithm name of the disabled |
| # algorithm. See "Java Cryptography Architecture Standard Algorithm Name |
| # Documentation" for information about Standard Algorithm Names. Matching |
| # is performed using a case-insensitive sub-element matching rule. (For |
| # example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and |
| # "ECDSA" for signatures.) If the assertion "AlgorithmName" is a |
| # sub-element of the certificate algorithm name, the algorithm will be |
| # rejected during certification path building and validation. For example, |
| # the assertion algorithm name "DSA" will disable all certificate algorithms |
| # that rely on DSA, such as NONEwithDSA, SHA1withDSA. However, the assertion |
| # will not disable algorithms related to "ECDSA". |
| # |
| # A "Constraint" provides further guidance for the algorithm being specified. |
| # The "KeySizeConstraint" requires a key of a valid size range if the |
| # "AlgorithmName" is of a key algorithm. The "DecimalInteger" indicates the |
| # key size specified in number of bits. For example, "RSA keySize <= 1024" |
| # indicates that any RSA key with key size less than or equal to 1024 bits |
| # should be disabled, and "RSA keySize < 1024, RSA keySize > 2048" indicates |
| # that any RSA key with key size less than 1024 or greater than 2048 should |
| # be disabled. Note that the "KeySizeConstraint" only makes sense to key |
| # algorithms. |
| # |
| # Note: This property is currently used by Oracle's PKIX implementation. It |
| # is not guaranteed to be examined and used by other implementations. |
| # |
| # Example: |
| # jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048 |
| # |
| # |
| jdk.certpath.disabledAlgorithms=MD2, RSA keySize < 1024 |
| |
| # Algorithm restrictions for Secure Socket Layer/Transport Layer Security |
| # (SSL/TLS) processing |
| # |
| # In some environments, certain algorithms or key lengths may be undesirable |
| # when using SSL/TLS. This section describes the mechanism for disabling |
| # algorithms during SSL/TLS security parameters negotiation, including cipher |
| # suites selection, peer authentication and key exchange mechanisms. |
| # |
| # For PKI-based peer authentication and key exchange mechanisms, this list |
| # of disabled algorithms will also be checked during certification path |
| # building and validation, including algorithms used in certificates, as |
| # well as revocation information such as CRLs and signed OCSP Responses. |
| # This is in addition to the jdk.certpath.disabledAlgorithms property above. |
| # |
| # See the specification of "jdk.certpath.disabledAlgorithms" for the |
| # syntax of the disabled algorithm string. |
| # |
| # Note: This property is currently used by Oracle's JSSE implementation. |
| # It is not guaranteed to be examined and used by other implementations. |
| # |
| # Example: |
| # jdk.tls.disabledAlgorithms=MD5, SHA1, DSA, RSA keySize < 2048 |
| |