/*
 * Copyright 1996-2006 Sun Microsystems, Inc.  All Rights Reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Sun designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Sun in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
 * CA 95054 USA or visit www.sun.com if you need additional information or
 * have any questions.
 */

package java.io;


/**
 * Reads text from a character-input stream, buffering characters so as to
 * provide for the efficient reading of characters, arrays, and lines.
 *
 * <p> The buffer size may be specified, or the default size may be used.  The
 * default is large enough for most purposes.
 *
 * <p> In general, each read request made of a Reader causes a corresponding
 * read request to be made of the underlying character or byte stream.  It is
 * therefore advisable to wrap a BufferedReader around any Reader whose read()
 * operations may be costly, such as FileReaders and InputStreamReaders.  For
 * example,
 *
 * <pre>
 * BufferedReader in
 *   = new BufferedReader(new FileReader("foo.in"));
 * </pre>
 *
 * will buffer the input from the specified file.  Without buffering, each
 * invocation of read() or readLine() could cause bytes to be read from the
 * file, converted into characters, and then returned, which can be very
 * inefficient.
 *
 * <p> Programs that use DataInputStreams for textual input can be localized by
 * replacing each DataInputStream with an appropriate BufferedReader.
 *
 * @see FileReader
 * @see InputStreamReader
 *
 * @author      Mark Reinhold
 * @since       JDK1.1
 */

public class BufferedReader extends Reader {

    private Reader in;

    private char cb[];
    private int nChars, nextChar;

    private static final int INVALIDATED = -2;
    private static final int UNMARKED = -1;
    private int markedChar = UNMARKED;
    private int readAheadLimit = 0; /* Valid only when markedChar > 0 */

    /** If the next character is a line feed, skip it */
    private boolean skipLF = false;

    /** The skipLF flag when the mark was set */
    private boolean markedSkipLF = false;

    private static int defaultCharBufferSize = 8192;
    private static int defaultExpectedLineLength = 80;

    /**
     * Creates a buffering character-input stream that uses an input buffer of
     * the specified size.
     *
     * @param  in   A Reader
     * @param  sz   Input-buffer size
     *
     * @exception  IllegalArgumentException  If sz is <= 0
     */
    public BufferedReader(Reader in, int sz) {
        super(in);
        if (sz <= 0)
            throw new IllegalArgumentException("Buffer size <= 0");
        this.in = in;
        cb = new char[sz];
        nextChar = nChars = 0;
    }

    /**
     * Creates a buffering character-input stream that uses a default-sized
     * input buffer.
     *
     * @param  in   A Reader
     */
    public BufferedReader(Reader in) {
        this(in, defaultCharBufferSize);
    }

    /** Checks to make sure that the stream has not been closed */
    private void ensureOpen() throws IOException {
        if (in == null)
            throw new IOException("Stream closed");
    }

    /**
     * Fills the input buffer, taking the mark into account if it is valid.
     */
    private void fill() throws IOException {
        int dst;
        if (markedChar <= UNMARKED) {
            /* No mark */
            dst = 0;
        } else {
            /* Marked */
            int delta = nextChar - markedChar;
            if (delta >= readAheadLimit) {
                /* Gone past read-ahead limit: Invalidate mark */
                markedChar = INVALIDATED;
                readAheadLimit = 0;
                dst = 0;
            } else {
                if (readAheadLimit <= cb.length) {
                    /* Shuffle in the current buffer */
                    System.arraycopy(cb, markedChar, cb, 0, delta);
                    markedChar = 0;
                    dst = delta;
                } else {
                    /* Reallocate buffer to accommodate read-ahead limit */
                    char ncb[] = new char[readAheadLimit];
                    System.arraycopy(cb, markedChar, ncb, 0, delta);
                    cb = ncb;
                    markedChar = 0;
                    dst = delta;
                }
                nextChar = nChars = delta;
            }
        }

        int n;
        do {
            n = in.read(cb, dst, cb.length - dst);
        } while (n == 0);
        if (n > 0) {
            nChars = dst + n;
            nextChar = dst;
        }
    }

    /**
     * Reads a single character.
     *
     * @return The character read, as an integer in the range
     *         0 to 65535 (<tt>0x00-0xffff</tt>), or -1 if the
     *         end of the stream has been reached
     * @exception  IOException  If an I/O error occurs
     */
    public int read() throws IOException {
        synchronized (lock) {
            ensureOpen();
            for (;;) {
                if (nextChar >= nChars) {
                    fill();
                    if (nextChar >= nChars)
                        return -1;
                }
                if (skipLF) {
                    skipLF = false;
                    if (cb[nextChar] == '\n') {
                        nextChar++;
                        continue;
                    }
                }
                return cb[nextChar++];
            }
        }
    }

    /**
     * Reads characters into a portion of an array, reading from the underlying
     * stream if necessary.
     */
    private int read1(char[] cbuf, int off, int len) throws IOException {
        if (nextChar >= nChars) {
            /* If the requested length is at least as large as the buffer, and
               if there is no mark/reset activity, and if line feeds are not
               being skipped, do not bother to copy the characters into the
               local buffer.  In this way buffered streams will cascade
               harmlessly. */
            if (len >= cb.length && markedChar <= UNMARKED && !skipLF) {
                return in.read(cbuf, off, len);
            }
            fill();
        }
        if (nextChar >= nChars) return -1;
        if (skipLF) {
            skipLF = false;
            if (cb[nextChar] == '\n') {
                nextChar++;
                if (nextChar >= nChars)
                    fill();
                if (nextChar >= nChars)
                    return -1;
            }
        }
        int n = Math.min(len, nChars - nextChar);
        System.arraycopy(cb, nextChar, cbuf, off, n);
        nextChar += n;
        return n;
    }

    /**
     * Reads characters into a portion of an array.
     *
     * <p> This method implements the general contract of the corresponding
     * <code>{@link Reader#read(char[], int, int) read}</code> method of the
     * <code>{@link Reader}</code> class.  As an additional convenience, it
     * attempts to read as many characters as possible by repeatedly invoking
     * the <code>read</code> method of the underlying stream.  This iterated
     * <code>read</code> continues until one of the following conditions becomes
     * true: <ul>
     *
     *   <li> The specified number of characters have been read,
     *
     *   <li> The <code>read</code> method of the underlying stream returns
     *   <code>-1</code>, indicating end-of-file, or
     *
     *   <li> The <code>ready</code> method of the underlying stream
     *   returns <code>false</code>, indicating that further input requests
     *   would block.
     *
     * </ul> If the first <code>read</code> on the underlying stream returns
     * <code>-1</code> to indicate end-of-file then this method returns
     * <code>-1</code>.  Otherwise this method returns the number of characters
     * actually read.
     *
     * <p> Subclasses of this class are encouraged, but not required, to
     * attempt to read as many characters as possible in the same fashion.
     *
     * <p> Ordinarily this method takes characters from this stream's character
     * buffer, filling it from the underlying stream as necessary.  If,
     * however, the buffer is empty, the mark is not valid, and the requested
     * length is at least as large as the buffer, then this method will read
     * characters directly from the underlying stream into the given array.
     * Thus redundant <code>BufferedReader</code>s will not copy data
     * unnecessarily.
     *
     * @param      cbuf  Destination buffer
     * @param      off   Offset at which to start storing characters
     * @param      len   Maximum number of characters to read
     *
     * @return     The number of characters read, or -1 if the end of the
     *             stream has been reached
     *
     * @exception  IOException  If an I/O error occurs
     */
    public int read(char cbuf[], int off, int len) throws IOException {
        synchronized (lock) {
            ensureOpen();
            if ((off < 0) || (off > cbuf.length) || (len < 0) ||
                ((off + len) > cbuf.length) || ((off + len) < 0)) {
                throw new IndexOutOfBoundsException();
            } else if (len == 0) {
                return 0;
            }

            int n = read1(cbuf, off, len);
            if (n <= 0) return n;
            while ((n < len) && in.ready()) {
                int n1 = read1(cbuf, off + n, len - n);
                if (n1 <= 0) break;
                n += n1;
            }
            return n;
        }
    }

    /**
     * Reads a line of text.  A line is considered to be terminated by any one
     * of a line feed ('\n'), a carriage return ('\r'), or a carriage return
     * followed immediately by a linefeed.
     *
     * @param      ignoreLF  If true, the next '\n' will be skipped
     *
     * @return     A String containing the contents of the line, not including
     *             any line-termination characters, or null if the end of the
     *             stream has been reached
     *
     * @see        java.io.LineNumberReader#readLine()
     *
     * @exception  IOException  If an I/O error occurs
     */
    String readLine(boolean ignoreLF) throws IOException {
        StringBuffer s = null;
        int startChar;

        synchronized (lock) {
            ensureOpen();
            boolean omitLF = ignoreLF || skipLF;

        bufferLoop:
            for (;;) {

                if (nextChar >= nChars)
                    fill();
                if (nextChar >= nChars) { /* EOF */
                    if (s != null && s.length() > 0)
                        return s.toString();
                    else
                        return null;
                }
                boolean eol = false;
                char c = 0;
                int i;

                /* Skip a leftover '\n', if necessary */
                if (omitLF && (cb[nextChar] == '\n'))
                    nextChar++;
                skipLF = false;
                omitLF = false;

            charLoop:
                for (i = nextChar; i < nChars; i++) {
                    c = cb[i];
                    if ((c == '\n') || (c == '\r')) {
                        eol = true;
                        break charLoop;
                    }
                }

                startChar = nextChar;
                nextChar = i;

                if (eol) {
                    String str;
                    if (s == null) {
                        str = new String(cb, startChar, i - startChar);
                    } else {
                        s.append(cb, startChar, i - startChar);
                        str = s.toString();
                    }
                    nextChar++;
                    if (c == '\r') {
                        skipLF = true;
                    }
                    return str;
                }

                if (s == null)
                    s = new StringBuffer(defaultExpectedLineLength);
                s.append(cb, startChar, i - startChar);
            }
        }
    }

    /**
     * Reads a line of text.  A line is considered to be terminated by any one
     * of a line feed ('\n'), a carriage return ('\r'), or a carriage return
     * followed immediately by a linefeed.
     *
     * @return     A String containing the contents of the line, not including
     *             any line-termination characters, or null if the end of the
     *             stream has been reached
     *
     * @exception  IOException  If an I/O error occurs
     */
    public String readLine() throws IOException {
        return readLine(false);
    }

    /**
     * Skips characters.
     *
     * @param  n  The number of characters to skip
     *
     * @return    The number of characters actually skipped
     *
     * @exception  IllegalArgumentException  If <code>n</code> is negative.
     * @exception  IOException  If an I/O error occurs
     */
    public long skip(long n) throws IOException {
        if (n < 0L) {
            throw new IllegalArgumentException("skip value is negative");
        }
        synchronized (lock) {
            ensureOpen();
            long r = n;
            while (r > 0) {
                if (nextChar >= nChars)
                    fill();
                if (nextChar >= nChars) /* EOF */
                    break;
                if (skipLF) {
                    skipLF = false;
                    if (cb[nextChar] == '\n') {
                        nextChar++;
                    }
                }
                long d = nChars - nextChar;
                if (r <= d) {
                    nextChar += r;
                    r = 0;
                    break;
                }
                else {
                    r -= d;
                    nextChar = nChars;
                }
            }
            return n - r;
        }
    }

    /**
     * Tells whether this stream is ready to be read.  A buffered character
     * stream is ready if the buffer is not empty, or if the underlying
     * character stream is ready.
     *
     * @exception  IOException  If an I/O error occurs
     */
    public boolean ready() throws IOException {
        synchronized (lock) {
            ensureOpen();

            /*
             * If newline needs to be skipped and the next char to be read
             * is a newline character, then just skip it right away.
             */
            if (skipLF) {
                /* Note that in.ready() will return true if and only if the next
                 * read on the stream will not block.
                 */
                if (nextChar >= nChars && in.ready()) {
                    fill();
                }
                if (nextChar < nChars) {
                    if (cb[nextChar] == '\n')
                        nextChar++;
                    skipLF = false;
                }
            }
            return (nextChar < nChars) || in.ready();
        }
    }

    /**
     * Tells whether this stream supports the mark() operation, which it does.
     */
    public boolean markSupported() {
        return true;
    }

    /**
     * Marks the present position in the stream.  Subsequent calls to reset()
     * will attempt to reposition the stream to this point.
     *
     * @param readAheadLimit   Limit on the number of characters that may be
     *                         read while still preserving the mark. An attempt
     *                         to reset the stream after reading characters
     *                         up to this limit or beyond may fail.
     *                         A limit value larger than the size of the input
     *                         buffer will cause a new buffer to be allocated
     *                         whose size is no smaller than limit.
     *                         Therefore large values should be used with care.
     *
     * @exception  IllegalArgumentException  If readAheadLimit is < 0
     * @exception  IOException  If an I/O error occurs
     */
    public void mark(int readAheadLimit) throws IOException {
        if (readAheadLimit < 0) {
            throw new IllegalArgumentException("Read-ahead limit < 0");
        }
        synchronized (lock) {
            ensureOpen();
            this.readAheadLimit = readAheadLimit;
            markedChar = nextChar;
            markedSkipLF = skipLF;
        }
    }

    /**
     * Resets the stream to the most recent mark.
     *
     * @exception  IOException  If the stream has never been marked,
     *                          or if the mark has been invalidated
     */
    public void reset() throws IOException {
        synchronized (lock) {
            ensureOpen();
            if (markedChar < 0)
                throw new IOException((markedChar == INVALIDATED)
                                      ? "Mark invalid"
                                      : "Stream not marked");
            nextChar = markedChar;
            skipLF = markedSkipLF;
        }
    }

    public void close() throws IOException {
        synchronized (lock) {
            if (in == null)
                return;
            in.close();
            in = null;
            cb = null;
        }
    }
}