/*
 * Portions Copyright 2003-2007 Sun Microsystems, Inc.  All Rights Reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Sun designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Sun in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
 * CA 95054 USA or visit www.sun.com if you need additional information or
 * have any questions.
 */

/*
 * Portions Copyright IBM Corporation, 2001. All Rights Reserved.
 */
package java.math;

/**
 * Specifies a <i>rounding behavior</i> for numerical operations
 * capable of discarding precision. Each rounding mode indicates how
 * the least significant returned digit of a rounded result is to be
 * calculated.  If fewer digits are returned than the digits needed to
 * represent the exact numerical result, the discarded digits will be
 * referred to as the <i>discarded fraction</i> regardless the digits'
 * contribution to the value of the number.  In other words,
 * considered as a numerical value, the discarded fraction could have
 * an absolute value greater than one.
 *
 * <p>Each rounding mode description includes a table listing how
 * different two-digit decimal values would round to a one digit
 * decimal value under the rounding mode in question.  The result
 * column in the tables could be gotten by creating a
 * {@code BigDecimal} number with the specified value, forming a
 * {@link MathContext} object with the proper settings
 * ({@code precision} set to {@code 1}, and the
 * {@code roundingMode} set to the rounding mode in question), and
 * calling {@link BigDecimal#round round} on this number with the
 * proper {@code MathContext}.  A summary table showing the results
 * of these rounding operations for all rounding modes appears below.
 *
 *<p>
 *<table border>
 * <caption top><h3>Summary of Rounding Operations Under Different Rounding Modes</h3></caption>
 * <tr><th></th><th colspan=8>Result of rounding input to one digit with the given
 *                           rounding mode</th>
 * <tr valign=top>
 * <th>Input Number</th>         <th>{@code UP}</th>
 *                                           <th>{@code DOWN}</th>
 *                                                        <th>{@code CEILING}</th>
 *                                                                       <th>{@code FLOOR}</th>
 *                                                                                    <th>{@code HALF_UP}</th>
 *                                                                                                   <th>{@code HALF_DOWN}</th>
 *                                                                                                                    <th>{@code HALF_EVEN}</th>
 *                                                                                                                                     <th>{@code UNNECESSARY}</th>
 *
 * <tr align=right><td>5.5</td>  <td>6</td>  <td>5</td>    <td>6</td>    <td>5</td>  <td>6</td>      <td>5</td>       <td>6</td>       <td>throw {@code ArithmeticException}</td>
 * <tr align=right><td>2.5</td>  <td>3</td>  <td>2</td>    <td>3</td>    <td>2</td>  <td>3</td>      <td>2</td>       <td>2</td>       <td>throw {@code ArithmeticException}</td>
 * <tr align=right><td>1.6</td>  <td>2</td>  <td>1</td>    <td>2</td>    <td>1</td>  <td>2</td>      <td>2</td>       <td>2</td>       <td>throw {@code ArithmeticException}</td>
 * <tr align=right><td>1.1</td>  <td>2</td>  <td>1</td>    <td>2</td>    <td>1</td>  <td>1</td>      <td>1</td>       <td>1</td>       <td>throw {@code ArithmeticException}</td>
 * <tr align=right><td>1.0</td>  <td>1</td>  <td>1</td>    <td>1</td>    <td>1</td>  <td>1</td>      <td>1</td>       <td>1</td>       <td>1</td>
 * <tr align=right><td>-1.0</td> <td>-1</td> <td>-1</td>   <td>-1</td>   <td>-1</td> <td>-1</td>     <td>-1</td>      <td>-1</td>      <td>-1</td>
 * <tr align=right><td>-1.1</td> <td>-2</td> <td>-1</td>   <td>-1</td>   <td>-2</td> <td>-1</td>     <td>-1</td>      <td>-1</td>      <td>throw {@code ArithmeticException}</td>
 * <tr align=right><td>-1.6</td> <td>-2</td> <td>-1</td>   <td>-1</td>   <td>-2</td> <td>-2</td>     <td>-2</td>      <td>-2</td>      <td>throw {@code ArithmeticException}</td>
 * <tr align=right><td>-2.5</td> <td>-3</td> <td>-2</td>   <td>-2</td>   <td>-3</td> <td>-3</td>     <td>-2</td>      <td>-2</td>      <td>throw {@code ArithmeticException}</td>
 * <tr align=right><td>-5.5</td> <td>-6</td> <td>-5</td>   <td>-5</td>   <td>-6</td> <td>-6</td>     <td>-5</td>      <td>-6</td>      <td>throw {@code ArithmeticException}</td>
 *</table>
 *
 *
 * <p>This {@code enum} is intended to replace the integer-based
 * enumeration of rounding mode constants in {@link BigDecimal}
 * ({@link BigDecimal#ROUND_UP}, {@link BigDecimal#ROUND_DOWN},
 * etc. ).
 *
 * @see     BigDecimal
 * @see     MathContext
 * @author  Josh Bloch
 * @author  Mike Cowlishaw
 * @author  Joseph D. Darcy
 * @since 1.5
 */
public enum RoundingMode {

        /**
         * Rounding mode to round away from zero.  Always increments the
         * digit prior to a non-zero discarded fraction.  Note that this
         * rounding mode never decreases the magnitude of the calculated
         * value.
         *
         *<p>Example:
         *<table border>
         *<tr valign=top><th>Input Number</th>
         *    <th>Input rounded to one digit<br> with {@code UP} rounding
         *<tr align=right><td>5.5</td>  <td>6</td>
         *<tr align=right><td>2.5</td>  <td>3</td>
         *<tr align=right><td>1.6</td>  <td>2</td>
         *<tr align=right><td>1.1</td>  <td>2</td>
         *<tr align=right><td>1.0</td>  <td>1</td>
         *<tr align=right><td>-1.0</td> <td>-1</td>
         *<tr align=right><td>-1.1</td> <td>-2</td>
         *<tr align=right><td>-1.6</td> <td>-2</td>
         *<tr align=right><td>-2.5</td> <td>-3</td>
         *<tr align=right><td>-5.5</td> <td>-6</td>
         *</table>
         */
    UP(BigDecimal.ROUND_UP),

        /**
         * Rounding mode to round towards zero.  Never increments the digit
         * prior to a discarded fraction (i.e., truncates).  Note that this
         * rounding mode never increases the magnitude of the calculated value.
         *
         *<p>Example:
         *<table border>
         *<tr valign=top><th>Input Number</th>
         *    <th>Input rounded to one digit<br> with {@code DOWN} rounding
         *<tr align=right><td>5.5</td>  <td>5</td>
         *<tr align=right><td>2.5</td>  <td>2</td>
         *<tr align=right><td>1.6</td>  <td>1</td>
         *<tr align=right><td>1.1</td>  <td>1</td>
         *<tr align=right><td>1.0</td>  <td>1</td>
         *<tr align=right><td>-1.0</td> <td>-1</td>
         *<tr align=right><td>-1.1</td> <td>-1</td>
         *<tr align=right><td>-1.6</td> <td>-1</td>
         *<tr align=right><td>-2.5</td> <td>-2</td>
         *<tr align=right><td>-5.5</td> <td>-5</td>
         *</table>
         */
    DOWN(BigDecimal.ROUND_DOWN),

        /**
         * Rounding mode to round towards positive infinity.  If the
         * result is positive, behaves as for {@code RoundingMode.UP};
         * if negative, behaves as for {@code RoundingMode.DOWN}.  Note
         * that this rounding mode never decreases the calculated value.
         *
         *<p>Example:
         *<table border>
         *<tr valign=top><th>Input Number</th>
         *    <th>Input rounded to one digit<br> with {@code CEILING} rounding
         *<tr align=right><td>5.5</td>  <td>6</td>
         *<tr align=right><td>2.5</td>  <td>3</td>
         *<tr align=right><td>1.6</td>  <td>2</td>
         *<tr align=right><td>1.1</td>  <td>2</td>
         *<tr align=right><td>1.0</td>  <td>1</td>
         *<tr align=right><td>-1.0</td> <td>-1</td>
         *<tr align=right><td>-1.1</td> <td>-1</td>
         *<tr align=right><td>-1.6</td> <td>-1</td>
         *<tr align=right><td>-2.5</td> <td>-2</td>
         *<tr align=right><td>-5.5</td> <td>-5</td>
         *</table>
         */
    CEILING(BigDecimal.ROUND_CEILING),

        /**
         * Rounding mode to round towards negative infinity.  If the
         * result is positive, behave as for {@code RoundingMode.DOWN};
         * if negative, behave as for {@code RoundingMode.UP}.  Note that
         * this rounding mode never increases the calculated value.
         *
         *<p>Example:
         *<table border>
         *<tr valign=top><th>Input Number</th>
         *    <th>Input rounded to one digit<br> with {@code FLOOR} rounding
         *<tr align=right><td>5.5</td>  <td>5</td>
         *<tr align=right><td>2.5</td>  <td>2</td>
         *<tr align=right><td>1.6</td>  <td>1</td>
         *<tr align=right><td>1.1</td>  <td>1</td>
         *<tr align=right><td>1.0</td>  <td>1</td>
         *<tr align=right><td>-1.0</td> <td>-1</td>
         *<tr align=right><td>-1.1</td> <td>-2</td>
         *<tr align=right><td>-1.6</td> <td>-2</td>
         *<tr align=right><td>-2.5</td> <td>-3</td>
         *<tr align=right><td>-5.5</td> <td>-6</td>
         *</table>
         */
    FLOOR(BigDecimal.ROUND_FLOOR),

        /**
         * Rounding mode to round towards {@literal "nearest neighbor"}
         * unless both neighbors are equidistant, in which case round up.
         * Behaves as for {@code RoundingMode.UP} if the discarded
         * fraction is &ge; 0.5; otherwise, behaves as for
         * {@code RoundingMode.DOWN}.  Note that this is the rounding
         * mode commonly taught at school.
         *
         *<p>Example:
         *<table border>
         *<tr valign=top><th>Input Number</th>
         *    <th>Input rounded to one digit<br> with {@code HALF_UP} rounding
         *<tr align=right><td>5.5</td>  <td>6</td>
         *<tr align=right><td>2.5</td>  <td>3</td>
         *<tr align=right><td>1.6</td>  <td>2</td>
         *<tr align=right><td>1.1</td>  <td>1</td>
         *<tr align=right><td>1.0</td>  <td>1</td>
         *<tr align=right><td>-1.0</td> <td>-1</td>
         *<tr align=right><td>-1.1</td> <td>-1</td>
         *<tr align=right><td>-1.6</td> <td>-2</td>
         *<tr align=right><td>-2.5</td> <td>-3</td>
         *<tr align=right><td>-5.5</td> <td>-6</td>
         *</table>
         */
    HALF_UP(BigDecimal.ROUND_HALF_UP),

        /**
         * Rounding mode to round towards {@literal "nearest neighbor"}
         * unless both neighbors are equidistant, in which case round
         * down.  Behaves as for {@code RoundingMode.UP} if the discarded
         * fraction is &gt; 0.5; otherwise, behaves as for
         * {@code RoundingMode.DOWN}.
         *
         *<p>Example:
         *<table border>
         *<tr valign=top><th>Input Number</th>
         *    <th>Input rounded to one digit<br> with {@code HALF_DOWN} rounding
         *<tr align=right><td>5.5</td>  <td>5</td>
         *<tr align=right><td>2.5</td>  <td>2</td>
         *<tr align=right><td>1.6</td>  <td>2</td>
         *<tr align=right><td>1.1</td>  <td>1</td>
         *<tr align=right><td>1.0</td>  <td>1</td>
         *<tr align=right><td>-1.0</td> <td>-1</td>
         *<tr align=right><td>-1.1</td> <td>-1</td>
         *<tr align=right><td>-1.6</td> <td>-2</td>
         *<tr align=right><td>-2.5</td> <td>-2</td>
         *<tr align=right><td>-5.5</td> <td>-5</td>
         *</table>
         */
    HALF_DOWN(BigDecimal.ROUND_HALF_DOWN),

        /**
         * Rounding mode to round towards the {@literal "nearest neighbor"}
         * unless both neighbors are equidistant, in which case, round
         * towards the even neighbor.  Behaves as for
         * {@code RoundingMode.HALF_UP} if the digit to the left of the
         * discarded fraction is odd; behaves as for
         * {@code RoundingMode.HALF_DOWN} if it's even.  Note that this
         * is the rounding mode that statistically minimizes cumulative
         * error when applied repeatedly over a sequence of calculations.
         * It is sometimes known as {@literal "Banker's rounding,"} and is
         * chiefly used in the USA.  This rounding mode is analogous to
         * the rounding policy used for {@code float} and {@code double}
         * arithmetic in Java.
         *
         *<p>Example:
         *<table border>
         *<tr valign=top><th>Input Number</th>
         *    <th>Input rounded to one digit<br> with {@code HALF_EVEN} rounding
         *<tr align=right><td>5.5</td>  <td>6</td>
         *<tr align=right><td>2.5</td>  <td>2</td>
         *<tr align=right><td>1.6</td>  <td>2</td>
         *<tr align=right><td>1.1</td>  <td>1</td>
         *<tr align=right><td>1.0</td>  <td>1</td>
         *<tr align=right><td>-1.0</td> <td>-1</td>
         *<tr align=right><td>-1.1</td> <td>-1</td>
         *<tr align=right><td>-1.6</td> <td>-2</td>
         *<tr align=right><td>-2.5</td> <td>-2</td>
         *<tr align=right><td>-5.5</td> <td>-6</td>
         *</table>
         */
    HALF_EVEN(BigDecimal.ROUND_HALF_EVEN),

        /**
         * Rounding mode to assert that the requested operation has an exact
         * result, hence no rounding is necessary.  If this rounding mode is
         * specified on an operation that yields an inexact result, an
         * {@code ArithmeticException} is thrown.
         *<p>Example:
         *<table border>
         *<tr valign=top><th>Input Number</th>
         *    <th>Input rounded to one digit<br> with {@code UNNECESSARY} rounding
         *<tr align=right><td>5.5</td>  <td>throw {@code ArithmeticException}</td>
         *<tr align=right><td>2.5</td>  <td>throw {@code ArithmeticException}</td>
         *<tr align=right><td>1.6</td>  <td>throw {@code ArithmeticException}</td>
         *<tr align=right><td>1.1</td>  <td>throw {@code ArithmeticException}</td>
         *<tr align=right><td>1.0</td>  <td>1</td>
         *<tr align=right><td>-1.0</td> <td>-1</td>
         *<tr align=right><td>-1.1</td> <td>throw {@code ArithmeticException}</td>
         *<tr align=right><td>-1.6</td> <td>throw {@code ArithmeticException}</td>
         *<tr align=right><td>-2.5</td> <td>throw {@code ArithmeticException}</td>
         *<tr align=right><td>-5.5</td> <td>throw {@code ArithmeticException}</td>
         *</table>
         */
    UNNECESSARY(BigDecimal.ROUND_UNNECESSARY);

    // Corresponding BigDecimal rounding constant
    final int oldMode;

    /**
     * Constructor
     *
     * @param oldMode The {@code BigDecimal} constant corresponding to
     *        this mode
     */
    private RoundingMode(int oldMode) {
        this.oldMode = oldMode;
    }

    /**
     * Returns the {@code RoundingMode} object corresponding to a
     * legacy integer rounding mode constant in {@link BigDecimal}.
     *
     * @param  rm legacy integer rounding mode to convert
     * @return {@code RoundingMode} corresponding to the given integer.
     * @throws IllegalArgumentException integer is out of range
     */
    public static RoundingMode valueOf(int rm) {
        switch(rm) {

        case BigDecimal.ROUND_UP:
            return UP;

        case BigDecimal.ROUND_DOWN:
            return DOWN;

        case BigDecimal.ROUND_CEILING:
            return CEILING;

        case BigDecimal.ROUND_FLOOR:
            return FLOOR;

        case BigDecimal.ROUND_HALF_UP:
            return HALF_UP;

        case BigDecimal.ROUND_HALF_DOWN:
            return HALF_DOWN;

        case BigDecimal.ROUND_HALF_EVEN:
            return HALF_EVEN;

        case BigDecimal.ROUND_UNNECESSARY:
            return UNNECESSARY;

        default:
            throw new IllegalArgumentException("argument out of range");
        }
    }
}