| <!DOCTYPE HTML> |
| <!-- |
| Copyright (c) 1998, 2017, Oracle and/or its affiliates. All rights reserved. |
| DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| |
| This code is free software; you can redistribute it and/or modify it |
| under the terms of the GNU General Public License version 2 only, as |
| published by the Free Software Foundation. Oracle designates this |
| particular file as subject to the "Classpath" exception as provided |
| by Oracle in the LICENSE file that accompanied this code. |
| |
| This code is distributed in the hope that it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| version 2 for more details (a copy is included in the LICENSE file that |
| accompanied this code). |
| |
| You should have received a copy of the GNU General Public License version |
| 2 along with this work; if not, write to the Free Software Foundation, |
| Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| |
| Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| or visit www.oracle.com if you need additional information or have any |
| questions. |
| --> |
| <HTML lang="EN"> |
| <HEAD> |
| <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1"> |
| <TITLE>Networking Properties</TITLE> |
| </HEAD> |
| <BODY LANG="en-US" DIR="LTR"> |
| <H1 style="text-align:center">Networking Properties</H1> |
| <P>There are a few standard system properties used to |
| alter the mechanisms and behavior of the various classes of the |
| java.net package. Some are checked only once at startup of the VM, |
| and therefore are best set using the -D option of the java command, |
| while others have a more dynamic nature and can also be changed using |
| the <a href="../../lang/System.html#setProperty-java.lang.String-java.lang.String-">System.setProperty()</a> API. |
| The purpose of this document is to list |
| and detail all of these properties.</P> |
| <P>If there is no special note, a property value is checked every time it is used.</P> |
| <a id="Ipv4IPv6"></a> |
| <H2>IPv4 / IPv6</H2> |
| <UL> |
| <LI><P><B>java.net.preferIPv4Stack</B> (default: false)<BR> |
| If IPv6 is available on the operating system the |
| underlying native socket will be, by default, an IPv6 socket which |
| lets applications connect to, and accept connections from, both |
| IPv4 and IPv6 hosts. However, in the case an application would |
| rather use IPv4 only sockets, then this property can be set to <B>true</B>. |
| The implication is that it will not be possible for the application |
| to communicate with IPv6 only hosts.</P> |
| <LI><P><B>java.net.preferIPv6Addresses</B> (default: false)<BR> |
| When dealing with a host which has both IPv4 |
| and IPv6 addresses, and if IPv6 is available on the operating |
| system, the default behavior is to prefer using IPv4 addresses over |
| IPv6 ones. This is to ensure backward compatibility, for example |
| applications that depend on the representation of an IPv4 address |
| (e.g. 192.168.1.1). This property can be set to <B>true</B> to |
| change that preference and use IPv6 addresses over IPv4 ones where |
| possible, or <B>system</B> to preserve the order of the addresses as |
| returned by the operating system.</P> |
| </UL> |
| <P>Both of these properties are checked only once, at startup.</P> |
| <a id="Proxies"></a> |
| <H2>Proxies</H2> |
| <P>A proxy server allows indirect connection to network services and |
| is used mainly for security (to get through firewalls) and |
| performance reasons (proxies often do provide caching mechanisms). |
| The following properties allow for configuration of the various type |
| of proxies.</P> |
| <UL> |
| <LI><P>HTTP</P> |
| <P>The following proxy settings are used by the HTTP protocol handler.</P> |
| <UL> |
| <LI><P><B>http.proxyHost</B> (default: <none>)<BR> |
| The hostname, or address, of the proxy server |
| </P> |
| <LI><P><B>http.proxyPort</B> (default: 80)<BR> |
| The port number of the proxy server.</P> |
| <LI><P><B>http.nonProxyHosts</B> (default: localhost|127.*|[::1])<BR> |
| Indicates the hosts that should be accessed without going |
| through the proxy. Typically this defines internal hosts. |
| The value of this property is a list of hosts, |
| separated by the '|' character. In addition the wildcard |
| character '*' can be used for pattern matching. For example |
| <code>-Dhttp.nonProxyHosts=”*.foo.com|localhost”</code> |
| will indicate that every hosts in the foo.com domain and the |
| localhost should be accessed directly even if a proxy server is |
| specified.</P> |
| <P>The default value excludes all common variations of the loopback address.</P> |
| </UL> |
| <LI><P>HTTPS<BR>This is HTTP over SSL, a secure version of HTTP |
| mainly used when confidentiality (like on payment sites) is needed.</P> |
| <P>The following proxy settings are used by the HTTPS protocol handler.</P> |
| <UL> |
| <LI><P><B>https.proxyHost</B>(default: <none>)<BR> |
| The hostname, or address, of the proxy server |
| </P> |
| <LI><P><B>https.proxyPort</B> (default: 443)<BR> |
| The port number of the proxy server.</P> |
| <P>The HTTPS protocol handler will use the same nonProxyHosts |
| property as the HTTP protocol.</P> |
| </UL> |
| <LI><P>FTP</P> |
| <P>The following proxy settings are used by the FTP protocol handler.</P> |
| <UL> |
| <LI><P><B>ftp.proxyHost</B>(default: <none>)<BR> |
| The hostname, or address, of the proxy server |
| </P> |
| <LI><P><B>ftp.proxyPort</B> (default: 80)<BR> |
| The port number of the proxy server.</P> |
| <LI><P><B>ftp.nonProxyHosts</B> (default: localhost|127.*|[::1])<BR> |
| Indicates the hosts that should be accessed without going |
| through the proxy. Typically this defines internal hosts. |
| The value of this property is a list of hosts, separated by |
| the '|' character. In addition the wildcard character |
| '*' can be used for pattern matching. For example |
| <code>-Dhttp.nonProxyHosts=”*.foo.com|localhost”</code> |
| will indicate that every hosts in the foo.com domain and the |
| localhost should be accessed directly even if a proxy server is |
| specified.</P> |
| <P>The default value excludes all common variations of the loopback address.</P> |
| </UL> |
| <LI><P>SOCKS<BR>This is another type of proxy. It allows for lower |
| level type of tunneling since it works at the TCP level. In effect, |
| in the Java(tm) platform setting a SOCKS proxy server will result in |
| all TCP connections to go through that proxy, unless other proxies |
| are specified. If SOCKS is supported by a Java SE implementation, the |
| following properties will be used:</P> |
| <UL> |
| <LI><P><B>socksProxyHost</B> (default: <none>)<BR> |
| The hostname, or address, of the proxy server.</P> |
| <LI><P><B>socksProxyPort</B> (default: 1080)<BR> |
| The port number of the proxy server.</P> |
| <LI><P><B>socksProxyVersion</B> (default: 5)<BR> |
| The version of the SOCKS protocol supported by the server. The |
| default is <code>5</code> indicating SOCKS V5, alternatively |
| <code>4</code> can be specified for SOCKS V4. Setting the property |
| to values other than these leads to unspecified behavior.</P> |
| <LI><P><B>java.net.socks.username</B> (default: <none>)<BR> |
| Username to use if the SOCKSv5 server asks for authentication |
| and no java.net.Authenticator instance was found.</P> |
| <LI><P><B>java.net.socks.password</B> (default: <none>)<BR> |
| Password to use if the SOCKSv5 server asks for authentication |
| and no java.net.Authenticator instance was found.</P> |
| <P>Note that if no authentication is provided with either the above |
| properties or an Authenticator, and the proxy requires one, then |
| the <B>user.name</B> property will be used with no password.</P> |
| </UL> |
| <LI><P><B>java.net.useSystemProxies</B> (default: false)<BR> |
| On Windows systems, macOS systems and on Gnome systems it is possible to |
| tell the java.net stack, setting this property to <B>true</B>, to use |
| the system proxy settings (both these systems let you set proxies |
| globally through their user interface). Note that this property is |
| checked only once at startup.</P> |
| </UL> |
| <a id="MiscHTTP"></a> |
| <H2>Misc HTTP properties</H2> |
| <UL> |
| <LI><P><B>http.agent</B> (default: “Java/<version>”)<BR> |
| Defines the string sent in the User-Agent request header in http |
| requests. Note that the string “Java/<version>” will |
| be appended to the one provided in the property (e.g. if |
| -Dhttp.agent=”foobar” is used, the User-Agent header will |
| contain “foobar Java/1.5.0” if the version of the VM is |
| 1.5.0). This property is checked only once at startup.</P> |
| <LI><P><B>http.keepalive</B> (default: true)<BR> |
| Indicates if persistent connections should be supported. They improve |
| performance by allowing the underlying socket connection to be reused |
| for multiple http requests. If this is set to true then persistent |
| connections will be requested with HTTP 1.1 servers.</P> |
| <LI><P><B>http.maxConnections</B> (default: 5)<BR> |
| If HTTP keepalive is enabled (see above) this value determines the |
| maximum number of idle connections that will be simultaneously kept |
| alive, per destination.</P> |
| <LI><P><B>http.maxRedirects</B> (default: 20)<BR> |
| This integer value determines the maximum number, for a given request, |
| of HTTP redirects that will be automatically followed by the |
| protocol handler.</P> |
| <LI><P><B>http.auth.digest.validateServer</B> (default: false)</P> |
| <LI><P><B>http.auth.digest.validateProxy</B> (default: false)</P> |
| <LI><P><B>http.auth.digest.cnonceRepeat</B> (default: 5)</P> |
| <P>These 3 properties modify the behavior of the HTTP digest |
| authentication mechanism. Digest authentication provides a limited |
| ability for the server to authenticate itself to the client (i.e. |
| By proving it knows the user's password). However not all HTTP |
| servers support this capability and by default it is turned off. The |
| first two properties can be set to true to enforce this check for |
| authentication with either an origin or proxy server, respectively.</P> |
| <P>It is usually not necessary to change the third property. It |
| determines how many times a cnonce value is re-used. This can be |
| useful when the MD5-sess algorithm is being used. Increasing this |
| value reduces the computational overhead on both client and server |
| by reducing the amount of material that has to be hashed for each |
| HTTP request.</P> |
| <LI><P><B>http.auth.ntlm.domain</B> (default: <none>)<BR> |
| NTLM is another authentication scheme. It uses the |
| java.net.Authenticator class to acquire usernames and passwords when |
| they are needed. However NTLM also needs the NT domain name. There are |
| 3 options for specifying that domain:</P> |
| <OL> |
| <LI><P>Do not specify it. In some environments the domain is |
| actually not required and the application does not have to specify |
| it.</P> |
| <LI><P>The domain name can be encoded within the username by |
| prefixing the domain name, followed by a back-slash '\' before the |
| username. With this method existing applications that use the |
| authenticator class do not need to be modified, as long as users |
| are made aware that this notation must be used.</P> |
| <LI><P>If a domain name is not specified as in method 2) and these |
| property is defined, then its value will be used a the domain |
| name.</P> |
| </OL> |
| </UL> |
| <P>All these properties are checked only once at startup.</P> |
| <a id="AddressCache"></a> |
| <H2>Address Cache</H2> |
| <P>The java.net package, when doing name resolution, uses an address |
| cache for both security and performance reasons. Any address |
| resolution attempt, be it forward (name to IP address) or reverse (IP |
| address to name), will have its result cached, whether it was |
| successful or not, so that subsequent identical requests will not |
| have to access the naming service. These properties allow for some |
| tuning on how the cache is operating.</P> |
| <UL> |
| <LI><P><B>networkaddress.cache.ttl</B> (default: see below)<BR> |
| Value is an integer corresponding to the number of seconds successful |
| name lookups will be kept in the cache. A value of -1, or any other |
| negative value for that matter, indicates a “cache forever” |
| policy, while a value of 0 (zero) means no caching. The default value |
| is -1 (forever) if a security manager is installed, and implementation |
| specific when no security manager is installed.</P> |
| <LI><P><B>networkaddress.cache.negative.ttl</B> (default: 10)<BR> |
| Value is an integer corresponding to the number of seconds an |
| unsuccessful name lookup will be kept in the cache. A value of -1, |
| or any negative value, means “cache forever”, while a |
| value of 0 (zero) means no caching.</P> |
| </UL> |
| <P>Since these 2 properties are part of the security policy, they are |
| not set by either the -D option or the System.setProperty() API, |
| instead they are set as security properties.</P> |
| </BODY> |
| </HTML> |