| /* |
| * Copyright (c) 2014, 2016, Oracle and/or its affiliates. All rights reserved. |
| * Copyright (c) 2015 SAP SE. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| * |
| */ |
| |
| #include "precompiled.hpp" |
| #include "asm/macroAssembler.inline.hpp" |
| #include "interpreter/bytecodeHistogram.hpp" |
| #include "interpreter/interpreter.hpp" |
| #include "interpreter/interpreterRuntime.hpp" |
| #include "interpreter/interp_masm.hpp" |
| #include "interpreter/templateInterpreterGenerator.hpp" |
| #include "interpreter/templateTable.hpp" |
| #include "oops/arrayOop.hpp" |
| #include "oops/methodData.hpp" |
| #include "oops/method.hpp" |
| #include "oops/oop.inline.hpp" |
| #include "prims/jvmtiExport.hpp" |
| #include "prims/jvmtiThreadState.hpp" |
| #include "runtime/arguments.hpp" |
| #include "runtime/deoptimization.hpp" |
| #include "runtime/frame.inline.hpp" |
| #include "runtime/sharedRuntime.hpp" |
| #include "runtime/stubRoutines.hpp" |
| #include "runtime/synchronizer.hpp" |
| #include "runtime/timer.hpp" |
| #include "runtime/vframeArray.hpp" |
| #include "utilities/debug.hpp" |
| #include "utilities/macros.hpp" |
| |
| #undef __ |
| #define __ _masm-> |
| |
| // Size of interpreter code. Increase if too small. Interpreter will |
| // fail with a guarantee ("not enough space for interpreter generation"); |
| // if too small. |
| // Run with +PrintInterpreter to get the VM to print out the size. |
| // Max size with JVMTI |
| int TemplateInterpreter::InterpreterCodeSize = 230*K; |
| |
| #ifdef PRODUCT |
| #define BLOCK_COMMENT(str) /* nothing */ |
| #else |
| #define BLOCK_COMMENT(str) __ block_comment(str) |
| #endif |
| |
| #define BIND(label) __ bind(label); BLOCK_COMMENT(#label ":") |
| |
| //----------------------------------------------------------------------------- |
| |
| address TemplateInterpreterGenerator::generate_slow_signature_handler() { |
| // Slow_signature handler that respects the PPC C calling conventions. |
| // |
| // We get called by the native entry code with our output register |
| // area == 8. First we call InterpreterRuntime::get_result_handler |
| // to copy the pointer to the signature string temporarily to the |
| // first C-argument and to return the result_handler in |
| // R3_RET. Since native_entry will copy the jni-pointer to the |
| // first C-argument slot later on, it is OK to occupy this slot |
| // temporarilly. Then we copy the argument list on the java |
| // expression stack into native varargs format on the native stack |
| // and load arguments into argument registers. Integer arguments in |
| // the varargs vector will be sign-extended to 8 bytes. |
| // |
| // On entry: |
| // R3_ARG1 - intptr_t* Address of java argument list in memory. |
| // R15_prev_state - BytecodeInterpreter* Address of interpreter state for |
| // this method |
| // R19_method |
| // |
| // On exit (just before return instruction): |
| // R3_RET - contains the address of the result_handler. |
| // R4_ARG2 - is not updated for static methods and contains "this" otherwise. |
| // R5_ARG3-R10_ARG8: - When the (i-2)th Java argument is not of type float or double, |
| // ARGi contains this argument. Otherwise, ARGi is not updated. |
| // F1_ARG1-F13_ARG13 - contain the first 13 arguments of type float or double. |
| |
| const int LogSizeOfTwoInstructions = 3; |
| |
| // FIXME: use Argument:: GL: Argument names different numbers! |
| const int max_fp_register_arguments = 13; |
| const int max_int_register_arguments = 6; // first 2 are reserved |
| |
| const Register arg_java = R21_tmp1; |
| const Register arg_c = R22_tmp2; |
| const Register signature = R23_tmp3; // is string |
| const Register sig_byte = R24_tmp4; |
| const Register fpcnt = R25_tmp5; |
| const Register argcnt = R26_tmp6; |
| const Register intSlot = R27_tmp7; |
| const Register target_sp = R28_tmp8; |
| const FloatRegister floatSlot = F0; |
| |
| address entry = __ function_entry(); |
| |
| __ save_LR_CR(R0); |
| __ save_nonvolatile_gprs(R1_SP, _spill_nonvolatiles_neg(r14)); |
| // We use target_sp for storing arguments in the C frame. |
| __ mr(target_sp, R1_SP); |
| __ push_frame_reg_args_nonvolatiles(0, R11_scratch1); |
| |
| __ mr(arg_java, R3_ARG1); |
| |
| __ call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::get_signature), R16_thread, R19_method); |
| |
| // Signature is in R3_RET. Signature is callee saved. |
| __ mr(signature, R3_RET); |
| |
| // Get the result handler. |
| __ call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::get_result_handler), R16_thread, R19_method); |
| |
| { |
| Label L; |
| // test if static |
| // _access_flags._flags must be at offset 0. |
| // TODO PPC port: requires change in shared code. |
| //assert(in_bytes(AccessFlags::flags_offset()) == 0, |
| // "MethodDesc._access_flags == MethodDesc._access_flags._flags"); |
| // _access_flags must be a 32 bit value. |
| assert(sizeof(AccessFlags) == 4, "wrong size"); |
| __ lwa(R11_scratch1/*access_flags*/, method_(access_flags)); |
| // testbit with condition register. |
| __ testbitdi(CCR0, R0, R11_scratch1/*access_flags*/, JVM_ACC_STATIC_BIT); |
| __ btrue(CCR0, L); |
| // For non-static functions, pass "this" in R4_ARG2 and copy it |
| // to 2nd C-arg slot. |
| // We need to box the Java object here, so we use arg_java |
| // (address of current Java stack slot) as argument and don't |
| // dereference it as in case of ints, floats, etc. |
| __ mr(R4_ARG2, arg_java); |
| __ addi(arg_java, arg_java, -BytesPerWord); |
| __ std(R4_ARG2, _abi(carg_2), target_sp); |
| __ bind(L); |
| } |
| |
| // Will be incremented directly after loop_start. argcnt=0 |
| // corresponds to 3rd C argument. |
| __ li(argcnt, -1); |
| // arg_c points to 3rd C argument |
| __ addi(arg_c, target_sp, _abi(carg_3)); |
| // no floating-point args parsed so far |
| __ li(fpcnt, 0); |
| |
| Label move_intSlot_to_ARG, move_floatSlot_to_FARG; |
| Label loop_start, loop_end; |
| Label do_int, do_long, do_float, do_double, do_dontreachhere, do_object, do_array, do_boxed; |
| |
| // signature points to '(' at entry |
| #ifdef ASSERT |
| __ lbz(sig_byte, 0, signature); |
| __ cmplwi(CCR0, sig_byte, '('); |
| __ bne(CCR0, do_dontreachhere); |
| #endif |
| |
| __ bind(loop_start); |
| |
| __ addi(argcnt, argcnt, 1); |
| __ lbzu(sig_byte, 1, signature); |
| |
| __ cmplwi(CCR0, sig_byte, ')'); // end of signature |
| __ beq(CCR0, loop_end); |
| |
| __ cmplwi(CCR0, sig_byte, 'B'); // byte |
| __ beq(CCR0, do_int); |
| |
| __ cmplwi(CCR0, sig_byte, 'C'); // char |
| __ beq(CCR0, do_int); |
| |
| __ cmplwi(CCR0, sig_byte, 'D'); // double |
| __ beq(CCR0, do_double); |
| |
| __ cmplwi(CCR0, sig_byte, 'F'); // float |
| __ beq(CCR0, do_float); |
| |
| __ cmplwi(CCR0, sig_byte, 'I'); // int |
| __ beq(CCR0, do_int); |
| |
| __ cmplwi(CCR0, sig_byte, 'J'); // long |
| __ beq(CCR0, do_long); |
| |
| __ cmplwi(CCR0, sig_byte, 'S'); // short |
| __ beq(CCR0, do_int); |
| |
| __ cmplwi(CCR0, sig_byte, 'Z'); // boolean |
| __ beq(CCR0, do_int); |
| |
| __ cmplwi(CCR0, sig_byte, 'L'); // object |
| __ beq(CCR0, do_object); |
| |
| __ cmplwi(CCR0, sig_byte, '['); // array |
| __ beq(CCR0, do_array); |
| |
| // __ cmplwi(CCR0, sig_byte, 'V'); // void cannot appear since we do not parse the return type |
| // __ beq(CCR0, do_void); |
| |
| __ bind(do_dontreachhere); |
| |
| __ unimplemented("ShouldNotReachHere in slow_signature_handler", 120); |
| |
| __ bind(do_array); |
| |
| { |
| Label start_skip, end_skip; |
| |
| __ bind(start_skip); |
| __ lbzu(sig_byte, 1, signature); |
| __ cmplwi(CCR0, sig_byte, '['); |
| __ beq(CCR0, start_skip); // skip further brackets |
| __ cmplwi(CCR0, sig_byte, '9'); |
| __ bgt(CCR0, end_skip); // no optional size |
| __ cmplwi(CCR0, sig_byte, '0'); |
| __ bge(CCR0, start_skip); // skip optional size |
| __ bind(end_skip); |
| |
| __ cmplwi(CCR0, sig_byte, 'L'); |
| __ beq(CCR0, do_object); // for arrays of objects, the name of the object must be skipped |
| __ b(do_boxed); // otherwise, go directly to do_boxed |
| } |
| |
| __ bind(do_object); |
| { |
| Label L; |
| __ bind(L); |
| __ lbzu(sig_byte, 1, signature); |
| __ cmplwi(CCR0, sig_byte, ';'); |
| __ bne(CCR0, L); |
| } |
| // Need to box the Java object here, so we use arg_java (address of |
| // current Java stack slot) as argument and don't dereference it as |
| // in case of ints, floats, etc. |
| Label do_null; |
| __ bind(do_boxed); |
| __ ld(R0,0, arg_java); |
| __ cmpdi(CCR0, R0, 0); |
| __ li(intSlot,0); |
| __ beq(CCR0, do_null); |
| __ mr(intSlot, arg_java); |
| __ bind(do_null); |
| __ std(intSlot, 0, arg_c); |
| __ addi(arg_java, arg_java, -BytesPerWord); |
| __ addi(arg_c, arg_c, BytesPerWord); |
| __ cmplwi(CCR0, argcnt, max_int_register_arguments); |
| __ blt(CCR0, move_intSlot_to_ARG); |
| __ b(loop_start); |
| |
| __ bind(do_int); |
| __ lwa(intSlot, 0, arg_java); |
| __ std(intSlot, 0, arg_c); |
| __ addi(arg_java, arg_java, -BytesPerWord); |
| __ addi(arg_c, arg_c, BytesPerWord); |
| __ cmplwi(CCR0, argcnt, max_int_register_arguments); |
| __ blt(CCR0, move_intSlot_to_ARG); |
| __ b(loop_start); |
| |
| __ bind(do_long); |
| __ ld(intSlot, -BytesPerWord, arg_java); |
| __ std(intSlot, 0, arg_c); |
| __ addi(arg_java, arg_java, - 2 * BytesPerWord); |
| __ addi(arg_c, arg_c, BytesPerWord); |
| __ cmplwi(CCR0, argcnt, max_int_register_arguments); |
| __ blt(CCR0, move_intSlot_to_ARG); |
| __ b(loop_start); |
| |
| __ bind(do_float); |
| __ lfs(floatSlot, 0, arg_java); |
| #if defined(LINUX) |
| // Linux uses ELF ABI. Both original ELF and ELFv2 ABIs have float |
| // in the least significant word of an argument slot. |
| #if defined(VM_LITTLE_ENDIAN) |
| __ stfs(floatSlot, 0, arg_c); |
| #else |
| __ stfs(floatSlot, 4, arg_c); |
| #endif |
| #elif defined(AIX) |
| // Although AIX runs on big endian CPU, float is in most significant |
| // word of an argument slot. |
| __ stfs(floatSlot, 0, arg_c); |
| #else |
| #error "unknown OS" |
| #endif |
| __ addi(arg_java, arg_java, -BytesPerWord); |
| __ addi(arg_c, arg_c, BytesPerWord); |
| __ cmplwi(CCR0, fpcnt, max_fp_register_arguments); |
| __ blt(CCR0, move_floatSlot_to_FARG); |
| __ b(loop_start); |
| |
| __ bind(do_double); |
| __ lfd(floatSlot, - BytesPerWord, arg_java); |
| __ stfd(floatSlot, 0, arg_c); |
| __ addi(arg_java, arg_java, - 2 * BytesPerWord); |
| __ addi(arg_c, arg_c, BytesPerWord); |
| __ cmplwi(CCR0, fpcnt, max_fp_register_arguments); |
| __ blt(CCR0, move_floatSlot_to_FARG); |
| __ b(loop_start); |
| |
| __ bind(loop_end); |
| |
| __ pop_frame(); |
| __ restore_nonvolatile_gprs(R1_SP, _spill_nonvolatiles_neg(r14)); |
| __ restore_LR_CR(R0); |
| |
| __ blr(); |
| |
| Label move_int_arg, move_float_arg; |
| __ bind(move_int_arg); // each case must consist of 2 instructions (otherwise adapt LogSizeOfTwoInstructions) |
| __ mr(R5_ARG3, intSlot); __ b(loop_start); |
| __ mr(R6_ARG4, intSlot); __ b(loop_start); |
| __ mr(R7_ARG5, intSlot); __ b(loop_start); |
| __ mr(R8_ARG6, intSlot); __ b(loop_start); |
| __ mr(R9_ARG7, intSlot); __ b(loop_start); |
| __ mr(R10_ARG8, intSlot); __ b(loop_start); |
| |
| __ bind(move_float_arg); // each case must consist of 2 instructions (otherwise adapt LogSizeOfTwoInstructions) |
| __ fmr(F1_ARG1, floatSlot); __ b(loop_start); |
| __ fmr(F2_ARG2, floatSlot); __ b(loop_start); |
| __ fmr(F3_ARG3, floatSlot); __ b(loop_start); |
| __ fmr(F4_ARG4, floatSlot); __ b(loop_start); |
| __ fmr(F5_ARG5, floatSlot); __ b(loop_start); |
| __ fmr(F6_ARG6, floatSlot); __ b(loop_start); |
| __ fmr(F7_ARG7, floatSlot); __ b(loop_start); |
| __ fmr(F8_ARG8, floatSlot); __ b(loop_start); |
| __ fmr(F9_ARG9, floatSlot); __ b(loop_start); |
| __ fmr(F10_ARG10, floatSlot); __ b(loop_start); |
| __ fmr(F11_ARG11, floatSlot); __ b(loop_start); |
| __ fmr(F12_ARG12, floatSlot); __ b(loop_start); |
| __ fmr(F13_ARG13, floatSlot); __ b(loop_start); |
| |
| __ bind(move_intSlot_to_ARG); |
| __ sldi(R0, argcnt, LogSizeOfTwoInstructions); |
| __ load_const(R11_scratch1, move_int_arg); // Label must be bound here. |
| __ add(R11_scratch1, R0, R11_scratch1); |
| __ mtctr(R11_scratch1/*branch_target*/); |
| __ bctr(); |
| __ bind(move_floatSlot_to_FARG); |
| __ sldi(R0, fpcnt, LogSizeOfTwoInstructions); |
| __ addi(fpcnt, fpcnt, 1); |
| __ load_const(R11_scratch1, move_float_arg); // Label must be bound here. |
| __ add(R11_scratch1, R0, R11_scratch1); |
| __ mtctr(R11_scratch1/*branch_target*/); |
| __ bctr(); |
| |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_result_handler_for(BasicType type) { |
| // |
| // Registers alive |
| // R3_RET |
| // LR |
| // |
| // Registers updated |
| // R3_RET |
| // |
| |
| Label done; |
| address entry = __ pc(); |
| |
| switch (type) { |
| case T_BOOLEAN: |
| // convert !=0 to 1 |
| __ neg(R0, R3_RET); |
| __ orr(R0, R3_RET, R0); |
| __ srwi(R3_RET, R0, 31); |
| break; |
| case T_BYTE: |
| // sign extend 8 bits |
| __ extsb(R3_RET, R3_RET); |
| break; |
| case T_CHAR: |
| // zero extend 16 bits |
| __ clrldi(R3_RET, R3_RET, 48); |
| break; |
| case T_SHORT: |
| // sign extend 16 bits |
| __ extsh(R3_RET, R3_RET); |
| break; |
| case T_INT: |
| // sign extend 32 bits |
| __ extsw(R3_RET, R3_RET); |
| break; |
| case T_LONG: |
| break; |
| case T_OBJECT: |
| // unbox result if not null |
| __ cmpdi(CCR0, R3_RET, 0); |
| __ beq(CCR0, done); |
| __ ld(R3_RET, 0, R3_RET); |
| __ verify_oop(R3_RET); |
| break; |
| case T_FLOAT: |
| break; |
| case T_DOUBLE: |
| break; |
| case T_VOID: |
| break; |
| default: ShouldNotReachHere(); |
| } |
| |
| BIND(done); |
| __ blr(); |
| |
| return entry; |
| } |
| |
| // Abstract method entry. |
| // |
| address TemplateInterpreterGenerator::generate_abstract_entry(void) { |
| address entry = __ pc(); |
| |
| // |
| // Registers alive |
| // R16_thread - JavaThread* |
| // R19_method - callee's method (method to be invoked) |
| // R1_SP - SP prepared such that caller's outgoing args are near top |
| // LR - return address to caller |
| // |
| // Stack layout at this point: |
| // |
| // 0 [TOP_IJAVA_FRAME_ABI] <-- R1_SP |
| // alignment (optional) |
| // [outgoing Java arguments] |
| // ... |
| // PARENT [PARENT_IJAVA_FRAME_ABI] |
| // ... |
| // |
| |
| // Can't use call_VM here because we have not set up a new |
| // interpreter state. Make the call to the vm and make it look like |
| // our caller set up the JavaFrameAnchor. |
| __ set_top_ijava_frame_at_SP_as_last_Java_frame(R1_SP, R12_scratch2/*tmp*/); |
| |
| // Push a new C frame and save LR. |
| __ save_LR_CR(R0); |
| __ push_frame_reg_args(0, R11_scratch1); |
| |
| // This is not a leaf but we have a JavaFrameAnchor now and we will |
| // check (create) exceptions afterward so this is ok. |
| __ call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_AbstractMethodError), |
| R16_thread); |
| |
| // Pop the C frame and restore LR. |
| __ pop_frame(); |
| __ restore_LR_CR(R0); |
| |
| // Reset JavaFrameAnchor from call_VM_leaf above. |
| __ reset_last_Java_frame(); |
| |
| // We don't know our caller, so jump to the general forward exception stub, |
| // which will also pop our full frame off. Satisfy the interface of |
| // SharedRuntime::generate_forward_exception() |
| __ load_const_optimized(R11_scratch1, StubRoutines::forward_exception_entry(), R0); |
| __ mtctr(R11_scratch1); |
| __ bctr(); |
| |
| return entry; |
| } |
| |
| // Interpreter intrinsic for WeakReference.get(). |
| // 1. Don't push a full blown frame and go on dispatching, but fetch the value |
| // into R8 and return quickly |
| // 2. If G1 is active we *must* execute this intrinsic for corrrectness: |
| // It contains a GC barrier which puts the reference into the satb buffer |
| // to indicate that someone holds a strong reference to the object the |
| // weak ref points to! |
| address TemplateInterpreterGenerator::generate_Reference_get_entry(void) { |
| // Code: _aload_0, _getfield, _areturn |
| // parameter size = 1 |
| // |
| // The code that gets generated by this routine is split into 2 parts: |
| // 1. the "intrinsified" code for G1 (or any SATB based GC), |
| // 2. the slow path - which is an expansion of the regular method entry. |
| // |
| // Notes: |
| // * In the G1 code we do not check whether we need to block for |
| // a safepoint. If G1 is enabled then we must execute the specialized |
| // code for Reference.get (except when the Reference object is null) |
| // so that we can log the value in the referent field with an SATB |
| // update buffer. |
| // If the code for the getfield template is modified so that the |
| // G1 pre-barrier code is executed when the current method is |
| // Reference.get() then going through the normal method entry |
| // will be fine. |
| // * The G1 code can, however, check the receiver object (the instance |
| // of java.lang.Reference) and jump to the slow path if null. If the |
| // Reference object is null then we obviously cannot fetch the referent |
| // and so we don't need to call the G1 pre-barrier. Thus we can use the |
| // regular method entry code to generate the NPE. |
| // |
| |
| if (UseG1GC) { |
| address entry = __ pc(); |
| |
| const int referent_offset = java_lang_ref_Reference::referent_offset; |
| guarantee(referent_offset > 0, "referent offset not initialized"); |
| |
| Label slow_path; |
| |
| // Debugging not possible, so can't use __ skip_if_jvmti_mode(slow_path, GR31_SCRATCH); |
| |
| // In the G1 code we don't check if we need to reach a safepoint. We |
| // continue and the thread will safepoint at the next bytecode dispatch. |
| |
| // If the receiver is null then it is OK to jump to the slow path. |
| __ ld(R3_RET, Interpreter::stackElementSize, R15_esp); // get receiver |
| |
| // Check if receiver == NULL and go the slow path. |
| __ cmpdi(CCR0, R3_RET, 0); |
| __ beq(CCR0, slow_path); |
| |
| // Load the value of the referent field. |
| __ load_heap_oop(R3_RET, referent_offset, R3_RET); |
| |
| // Generate the G1 pre-barrier code to log the value of |
| // the referent field in an SATB buffer. Note with |
| // these parameters the pre-barrier does not generate |
| // the load of the previous value. |
| |
| // Restore caller sp for c2i case. |
| #ifdef ASSERT |
| __ ld(R9_ARG7, 0, R1_SP); |
| __ ld(R10_ARG8, 0, R21_sender_SP); |
| __ cmpd(CCR0, R9_ARG7, R10_ARG8); |
| __ asm_assert_eq("backlink", 0x544); |
| #endif // ASSERT |
| __ mr(R1_SP, R21_sender_SP); // Cut the stack back to where the caller started. |
| |
| __ g1_write_barrier_pre(noreg, // obj |
| noreg, // offset |
| R3_RET, // pre_val |
| R11_scratch1, // tmp |
| R12_scratch2, // tmp |
| true); // needs_frame |
| |
| __ blr(); |
| |
| // Generate regular method entry. |
| __ bind(slow_path); |
| __ jump_to_entry(Interpreter::entry_for_kind(Interpreter::zerolocals), R11_scratch1); |
| return entry; |
| } |
| |
| return NULL; |
| } |
| |
| // Actually we should never reach here since we do stack overflow checks before pushing any frame. |
| address TemplateInterpreterGenerator::generate_StackOverflowError_handler() { |
| address entry = __ pc(); |
| __ unimplemented("generate_StackOverflowError_handler"); |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_ArrayIndexOutOfBounds_handler(const char* name) { |
| address entry = __ pc(); |
| __ empty_expression_stack(); |
| __ load_const_optimized(R4_ARG2, (address) name); |
| // Index is in R17_tos. |
| __ mr(R5_ARG3, R17_tos); |
| __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_ArrayIndexOutOfBoundsException)); |
| return entry; |
| } |
| |
| #if 0 |
| // Call special ClassCastException constructor taking object to cast |
| // and target class as arguments. |
| address TemplateInterpreterGenerator::generate_ClassCastException_verbose_handler() { |
| address entry = __ pc(); |
| |
| // Expression stack must be empty before entering the VM if an |
| // exception happened. |
| __ empty_expression_stack(); |
| |
| // Thread will be loaded to R3_ARG1. |
| // Target class oop is in register R5_ARG3 by convention! |
| __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_ClassCastException_verbose), R17_tos, R5_ARG3); |
| // Above call must not return here since exception pending. |
| DEBUG_ONLY(__ should_not_reach_here();) |
| return entry; |
| } |
| #endif |
| |
| address TemplateInterpreterGenerator::generate_ClassCastException_handler() { |
| address entry = __ pc(); |
| // Expression stack must be empty before entering the VM if an |
| // exception happened. |
| __ empty_expression_stack(); |
| |
| // Load exception object. |
| // Thread will be loaded to R3_ARG1. |
| __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_ClassCastException), R17_tos); |
| #ifdef ASSERT |
| // Above call must not return here since exception pending. |
| __ should_not_reach_here(); |
| #endif |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_exception_handler_common(const char* name, const char* message, bool pass_oop) { |
| address entry = __ pc(); |
| //__ untested("generate_exception_handler_common"); |
| Register Rexception = R17_tos; |
| |
| // Expression stack must be empty before entering the VM if an exception happened. |
| __ empty_expression_stack(); |
| |
| __ load_const_optimized(R4_ARG2, (address) name, R11_scratch1); |
| if (pass_oop) { |
| __ mr(R5_ARG3, Rexception); |
| __ call_VM(Rexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_klass_exception), false); |
| } else { |
| __ load_const_optimized(R5_ARG3, (address) message, R11_scratch1); |
| __ call_VM(Rexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_exception), false); |
| } |
| |
| // Throw exception. |
| __ mr(R3_ARG1, Rexception); |
| __ load_const_optimized(R11_scratch1, Interpreter::throw_exception_entry(), R12_scratch2); |
| __ mtctr(R11_scratch1); |
| __ bctr(); |
| |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_continuation_for(TosState state) { |
| address entry = __ pc(); |
| __ unimplemented("generate_continuation_for"); |
| return entry; |
| } |
| |
| // This entry is returned to when a call returns to the interpreter. |
| // When we arrive here, we expect that the callee stack frame is already popped. |
| address TemplateInterpreterGenerator::generate_return_entry_for(TosState state, int step, size_t index_size) { |
| address entry = __ pc(); |
| |
| // Move the value out of the return register back to the TOS cache of current frame. |
| switch (state) { |
| case ltos: |
| case btos: |
| case ctos: |
| case stos: |
| case atos: |
| case itos: __ mr(R17_tos, R3_RET); break; // RET -> TOS cache |
| case ftos: |
| case dtos: __ fmr(F15_ftos, F1_RET); break; // TOS cache -> GR_FRET |
| case vtos: break; // Nothing to do, this was a void return. |
| default : ShouldNotReachHere(); |
| } |
| |
| __ restore_interpreter_state(R11_scratch1); // Sets R11_scratch1 = fp. |
| __ ld(R12_scratch2, _ijava_state_neg(top_frame_sp), R11_scratch1); |
| __ resize_frame_absolute(R12_scratch2, R11_scratch1, R0); |
| |
| // Compiled code destroys templateTableBase, reload. |
| __ load_const_optimized(R25_templateTableBase, (address)Interpreter::dispatch_table((TosState)0), R12_scratch2); |
| |
| if (state == atos) { |
| __ profile_return_type(R3_RET, R11_scratch1, R12_scratch2); |
| } |
| |
| const Register cache = R11_scratch1; |
| const Register size = R12_scratch2; |
| __ get_cache_and_index_at_bcp(cache, 1, index_size); |
| |
| // Get least significant byte of 64 bit value: |
| #if defined(VM_LITTLE_ENDIAN) |
| __ lbz(size, in_bytes(ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::flags_offset()), cache); |
| #else |
| __ lbz(size, in_bytes(ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::flags_offset()) + 7, cache); |
| #endif |
| __ sldi(size, size, Interpreter::logStackElementSize); |
| __ add(R15_esp, R15_esp, size); |
| __ dispatch_next(state, step); |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_deopt_entry_for(TosState state, int step) { |
| address entry = __ pc(); |
| // If state != vtos, we're returning from a native method, which put it's result |
| // into the result register. So move the value out of the return register back |
| // to the TOS cache of current frame. |
| |
| switch (state) { |
| case ltos: |
| case btos: |
| case ctos: |
| case stos: |
| case atos: |
| case itos: __ mr(R17_tos, R3_RET); break; // GR_RET -> TOS cache |
| case ftos: |
| case dtos: __ fmr(F15_ftos, F1_RET); break; // TOS cache -> GR_FRET |
| case vtos: break; // Nothing to do, this was a void return. |
| default : ShouldNotReachHere(); |
| } |
| |
| // Load LcpoolCache @@@ should be already set! |
| __ get_constant_pool_cache(R27_constPoolCache); |
| |
| // Handle a pending exception, fall through if none. |
| __ check_and_forward_exception(R11_scratch1, R12_scratch2); |
| |
| // Start executing bytecodes. |
| __ dispatch_next(state, step); |
| |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_safept_entry_for(TosState state, address runtime_entry) { |
| address entry = __ pc(); |
| |
| __ push(state); |
| __ call_VM(noreg, runtime_entry); |
| __ dispatch_via(vtos, Interpreter::_normal_table.table_for(vtos)); |
| |
| return entry; |
| } |
| |
| // Helpers for commoning out cases in the various type of method entries. |
| |
| // Increment invocation count & check for overflow. |
| // |
| // Note: checking for negative value instead of overflow |
| // so we have a 'sticky' overflow test. |
| // |
| void TemplateInterpreterGenerator::generate_counter_incr(Label* overflow, Label* profile_method, Label* profile_method_continue) { |
| // Note: In tiered we increment either counters in method or in MDO depending if we're profiling or not. |
| Register Rscratch1 = R11_scratch1; |
| Register Rscratch2 = R12_scratch2; |
| Register R3_counters = R3_ARG1; |
| Label done; |
| |
| if (TieredCompilation) { |
| const int increment = InvocationCounter::count_increment; |
| Label no_mdo; |
| if (ProfileInterpreter) { |
| const Register Rmdo = R3_counters; |
| // If no method data exists, go to profile_continue. |
| __ ld(Rmdo, in_bytes(Method::method_data_offset()), R19_method); |
| __ cmpdi(CCR0, Rmdo, 0); |
| __ beq(CCR0, no_mdo); |
| |
| // Increment invocation counter in the MDO. |
| const int mdo_ic_offs = in_bytes(MethodData::invocation_counter_offset()) + in_bytes(InvocationCounter::counter_offset()); |
| __ lwz(Rscratch2, mdo_ic_offs, Rmdo); |
| __ lwz(Rscratch1, in_bytes(MethodData::invoke_mask_offset()), Rmdo); |
| __ addi(Rscratch2, Rscratch2, increment); |
| __ stw(Rscratch2, mdo_ic_offs, Rmdo); |
| __ and_(Rscratch1, Rscratch2, Rscratch1); |
| __ bne(CCR0, done); |
| __ b(*overflow); |
| } |
| |
| // Increment counter in MethodCounters*. |
| const int mo_ic_offs = in_bytes(MethodCounters::invocation_counter_offset()) + in_bytes(InvocationCounter::counter_offset()); |
| __ bind(no_mdo); |
| __ get_method_counters(R19_method, R3_counters, done); |
| __ lwz(Rscratch2, mo_ic_offs, R3_counters); |
| __ lwz(Rscratch1, in_bytes(MethodCounters::invoke_mask_offset()), R3_counters); |
| __ addi(Rscratch2, Rscratch2, increment); |
| __ stw(Rscratch2, mo_ic_offs, R3_counters); |
| __ and_(Rscratch1, Rscratch2, Rscratch1); |
| __ beq(CCR0, *overflow); |
| |
| __ bind(done); |
| |
| } else { |
| |
| // Update standard invocation counters. |
| Register Rsum_ivc_bec = R4_ARG2; |
| __ get_method_counters(R19_method, R3_counters, done); |
| __ increment_invocation_counter(R3_counters, Rsum_ivc_bec, R12_scratch2); |
| // Increment interpreter invocation counter. |
| if (ProfileInterpreter) { // %%% Merge this into methodDataOop. |
| __ lwz(R12_scratch2, in_bytes(MethodCounters::interpreter_invocation_counter_offset()), R3_counters); |
| __ addi(R12_scratch2, R12_scratch2, 1); |
| __ stw(R12_scratch2, in_bytes(MethodCounters::interpreter_invocation_counter_offset()), R3_counters); |
| } |
| // Check if we must create a method data obj. |
| if (ProfileInterpreter && profile_method != NULL) { |
| const Register profile_limit = Rscratch1; |
| __ lwz(profile_limit, in_bytes(MethodCounters::interpreter_profile_limit_offset()), R3_counters); |
| // Test to see if we should create a method data oop. |
| __ cmpw(CCR0, Rsum_ivc_bec, profile_limit); |
| __ blt(CCR0, *profile_method_continue); |
| // If no method data exists, go to profile_method. |
| __ test_method_data_pointer(*profile_method); |
| } |
| // Finally check for counter overflow. |
| if (overflow) { |
| const Register invocation_limit = Rscratch1; |
| __ lwz(invocation_limit, in_bytes(MethodCounters::interpreter_invocation_limit_offset()), R3_counters); |
| __ cmpw(CCR0, Rsum_ivc_bec, invocation_limit); |
| __ bge(CCR0, *overflow); |
| } |
| |
| __ bind(done); |
| } |
| } |
| |
| // Generate code to initiate compilation on invocation counter overflow. |
| void TemplateInterpreterGenerator::generate_counter_overflow(Label& continue_entry) { |
| // Generate code to initiate compilation on the counter overflow. |
| |
| // InterpreterRuntime::frequency_counter_overflow takes one arguments, |
| // which indicates if the counter overflow occurs at a backwards branch (NULL bcp) |
| // We pass zero in. |
| // The call returns the address of the verified entry point for the method or NULL |
| // if the compilation did not complete (either went background or bailed out). |
| // |
| // Unlike the C++ interpreter above: Check exceptions! |
| // Assumption: Caller must set the flag "do_not_unlock_if_sychronized" if the monitor of a sync'ed |
| // method has not yet been created. Thus, no unlocking of a non-existing monitor can occur. |
| |
| __ li(R4_ARG2, 0); |
| __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::frequency_counter_overflow), R4_ARG2, true); |
| |
| // Returns verified_entry_point or NULL. |
| // We ignore it in any case. |
| __ b(continue_entry); |
| } |
| |
| void TemplateInterpreterGenerator::generate_stack_overflow_check(Register Rmem_frame_size, Register Rscratch1) { |
| assert_different_registers(Rmem_frame_size, Rscratch1); |
| __ generate_stack_overflow_check_with_compare_and_throw(Rmem_frame_size, Rscratch1); |
| } |
| |
| void TemplateInterpreterGenerator::unlock_method(bool check_exceptions) { |
| __ unlock_object(R26_monitor, check_exceptions); |
| } |
| |
| // Lock the current method, interpreter register window must be set up! |
| void TemplateInterpreterGenerator::lock_method(Register Rflags, Register Rscratch1, Register Rscratch2, bool flags_preloaded) { |
| const Register Robj_to_lock = Rscratch2; |
| |
| { |
| if (!flags_preloaded) { |
| __ lwz(Rflags, method_(access_flags)); |
| } |
| |
| #ifdef ASSERT |
| // Check if methods needs synchronization. |
| { |
| Label Lok; |
| __ testbitdi(CCR0, R0, Rflags, JVM_ACC_SYNCHRONIZED_BIT); |
| __ btrue(CCR0,Lok); |
| __ stop("method doesn't need synchronization"); |
| __ bind(Lok); |
| } |
| #endif // ASSERT |
| } |
| |
| // Get synchronization object to Rscratch2. |
| { |
| const int mirror_offset = in_bytes(Klass::java_mirror_offset()); |
| Label Lstatic; |
| Label Ldone; |
| |
| __ testbitdi(CCR0, R0, Rflags, JVM_ACC_STATIC_BIT); |
| __ btrue(CCR0, Lstatic); |
| |
| // Non-static case: load receiver obj from stack and we're done. |
| __ ld(Robj_to_lock, R18_locals); |
| __ b(Ldone); |
| |
| __ bind(Lstatic); // Static case: Lock the java mirror |
| __ ld(Robj_to_lock, in_bytes(Method::const_offset()), R19_method); |
| __ ld(Robj_to_lock, in_bytes(ConstMethod::constants_offset()), Robj_to_lock); |
| __ ld(Robj_to_lock, ConstantPool::pool_holder_offset_in_bytes(), Robj_to_lock); |
| __ ld(Robj_to_lock, mirror_offset, Robj_to_lock); |
| |
| __ bind(Ldone); |
| __ verify_oop(Robj_to_lock); |
| } |
| |
| // Got the oop to lock => execute! |
| __ add_monitor_to_stack(true, Rscratch1, R0); |
| |
| __ std(Robj_to_lock, BasicObjectLock::obj_offset_in_bytes(), R26_monitor); |
| __ lock_object(R26_monitor, Robj_to_lock); |
| } |
| |
| // Generate a fixed interpreter frame for pure interpreter |
| // and I2N native transition frames. |
| // |
| // Before (stack grows downwards): |
| // |
| // | ... | |
| // |------------- | |
| // | java arg0 | |
| // | ... | |
| // | java argn | |
| // | | <- R15_esp |
| // | | |
| // |--------------| |
| // | abi_112 | |
| // | | <- R1_SP |
| // |==============| |
| // |
| // |
| // After: |
| // |
| // | ... | |
| // | java arg0 |<- R18_locals |
| // | ... | |
| // | java argn | |
| // |--------------| |
| // | | |
| // | java locals | |
| // | | |
| // |--------------| |
| // | abi_48 | |
| // |==============| |
| // | | |
| // | istate | |
| // | | |
| // |--------------| |
| // | monitor |<- R26_monitor |
| // |--------------| |
| // | |<- R15_esp |
| // | expression | |
| // | stack | |
| // | | |
| // |--------------| |
| // | | |
| // | abi_112 |<- R1_SP |
| // |==============| |
| // |
| // The top most frame needs an abi space of 112 bytes. This space is needed, |
| // since we call to c. The c function may spill their arguments to the caller |
| // frame. When we call to java, we don't need these spill slots. In order to save |
| // space on the stack, we resize the caller. However, java local reside in |
| // the caller frame and the frame has to be increased. The frame_size for the |
| // current frame was calculated based on max_stack as size for the expression |
| // stack. At the call, just a part of the expression stack might be used. |
| // We don't want to waste this space and cut the frame back accordingly. |
| // The resulting amount for resizing is calculated as follows: |
| // resize = (number_of_locals - number_of_arguments) * slot_size |
| // + (R1_SP - R15_esp) + 48 |
| // |
| // The size for the callee frame is calculated: |
| // framesize = 112 + max_stack + monitor + state_size |
| // |
| // maxstack: Max number of slots on the expression stack, loaded from the method. |
| // monitor: We statically reserve room for one monitor object. |
| // state_size: We save the current state of the interpreter to this area. |
| // |
| void TemplateInterpreterGenerator::generate_fixed_frame(bool native_call, Register Rsize_of_parameters, Register Rsize_of_locals) { |
| Register parent_frame_resize = R6_ARG4, // Frame will grow by this number of bytes. |
| top_frame_size = R7_ARG5, |
| Rconst_method = R8_ARG6; |
| |
| assert_different_registers(Rsize_of_parameters, Rsize_of_locals, parent_frame_resize, top_frame_size); |
| |
| __ ld(Rconst_method, method_(const)); |
| __ lhz(Rsize_of_parameters /* number of params */, |
| in_bytes(ConstMethod::size_of_parameters_offset()), Rconst_method); |
| if (native_call) { |
| // If we're calling a native method, we reserve space for the worst-case signature |
| // handler varargs vector, which is max(Argument::n_register_parameters, parameter_count+2). |
| // We add two slots to the parameter_count, one for the jni |
| // environment and one for a possible native mirror. |
| Label skip_native_calculate_max_stack; |
| __ addi(top_frame_size, Rsize_of_parameters, 2); |
| __ cmpwi(CCR0, top_frame_size, Argument::n_register_parameters); |
| __ bge(CCR0, skip_native_calculate_max_stack); |
| __ li(top_frame_size, Argument::n_register_parameters); |
| __ bind(skip_native_calculate_max_stack); |
| __ sldi(Rsize_of_parameters, Rsize_of_parameters, Interpreter::logStackElementSize); |
| __ sldi(top_frame_size, top_frame_size, Interpreter::logStackElementSize); |
| __ sub(parent_frame_resize, R1_SP, R15_esp); // <0, off by Interpreter::stackElementSize! |
| assert(Rsize_of_locals == noreg, "Rsize_of_locals not initialized"); // Only relevant value is Rsize_of_parameters. |
| } else { |
| __ lhz(Rsize_of_locals /* number of params */, in_bytes(ConstMethod::size_of_locals_offset()), Rconst_method); |
| __ sldi(Rsize_of_parameters, Rsize_of_parameters, Interpreter::logStackElementSize); |
| __ sldi(Rsize_of_locals, Rsize_of_locals, Interpreter::logStackElementSize); |
| __ lhz(top_frame_size, in_bytes(ConstMethod::max_stack_offset()), Rconst_method); |
| __ sub(R11_scratch1, Rsize_of_locals, Rsize_of_parameters); // >=0 |
| __ sub(parent_frame_resize, R1_SP, R15_esp); // <0, off by Interpreter::stackElementSize! |
| __ sldi(top_frame_size, top_frame_size, Interpreter::logStackElementSize); |
| __ add(parent_frame_resize, parent_frame_resize, R11_scratch1); |
| } |
| |
| // Compute top frame size. |
| __ addi(top_frame_size, top_frame_size, frame::abi_reg_args_size + frame::ijava_state_size); |
| |
| // Cut back area between esp and max_stack. |
| __ addi(parent_frame_resize, parent_frame_resize, frame::abi_minframe_size - Interpreter::stackElementSize); |
| |
| __ round_to(top_frame_size, frame::alignment_in_bytes); |
| __ round_to(parent_frame_resize, frame::alignment_in_bytes); |
| // parent_frame_resize = (locals-parameters) - (ESP-SP-ABI48) Rounded to frame alignment size. |
| // Enlarge by locals-parameters (not in case of native_call), shrink by ESP-SP-ABI48. |
| |
| { |
| // -------------------------------------------------------------------------- |
| // Stack overflow check |
| |
| Label cont; |
| __ add(R11_scratch1, parent_frame_resize, top_frame_size); |
| generate_stack_overflow_check(R11_scratch1, R12_scratch2); |
| } |
| |
| // Set up interpreter state registers. |
| |
| __ add(R18_locals, R15_esp, Rsize_of_parameters); |
| __ ld(R27_constPoolCache, in_bytes(ConstMethod::constants_offset()), Rconst_method); |
| __ ld(R27_constPoolCache, ConstantPool::cache_offset_in_bytes(), R27_constPoolCache); |
| |
| // Set method data pointer. |
| if (ProfileInterpreter) { |
| Label zero_continue; |
| __ ld(R28_mdx, method_(method_data)); |
| __ cmpdi(CCR0, R28_mdx, 0); |
| __ beq(CCR0, zero_continue); |
| __ addi(R28_mdx, R28_mdx, in_bytes(MethodData::data_offset())); |
| __ bind(zero_continue); |
| } |
| |
| if (native_call) { |
| __ li(R14_bcp, 0); // Must initialize. |
| } else { |
| __ add(R14_bcp, in_bytes(ConstMethod::codes_offset()), Rconst_method); |
| } |
| |
| // Resize parent frame. |
| __ mflr(R12_scratch2); |
| __ neg(parent_frame_resize, parent_frame_resize); |
| __ resize_frame(parent_frame_resize, R11_scratch1); |
| __ std(R12_scratch2, _abi(lr), R1_SP); |
| |
| __ addi(R26_monitor, R1_SP, - frame::ijava_state_size); |
| __ addi(R15_esp, R26_monitor, - Interpreter::stackElementSize); |
| |
| // Store values. |
| // R15_esp, R14_bcp, R26_monitor, R28_mdx are saved at java calls |
| // in InterpreterMacroAssembler::call_from_interpreter. |
| __ std(R19_method, _ijava_state_neg(method), R1_SP); |
| __ std(R21_sender_SP, _ijava_state_neg(sender_sp), R1_SP); |
| __ std(R27_constPoolCache, _ijava_state_neg(cpoolCache), R1_SP); |
| __ std(R18_locals, _ijava_state_neg(locals), R1_SP); |
| |
| // Note: esp, bcp, monitor, mdx live in registers. Hence, the correct version can only |
| // be found in the frame after save_interpreter_state is done. This is always true |
| // for non-top frames. But when a signal occurs, dumping the top frame can go wrong, |
| // because e.g. frame::interpreter_frame_bcp() will not access the correct value |
| // (Enhanced Stack Trace). |
| // The signal handler does not save the interpreter state into the frame. |
| __ li(R0, 0); |
| #ifdef ASSERT |
| // Fill remaining slots with constants. |
| __ load_const_optimized(R11_scratch1, 0x5afe); |
| __ load_const_optimized(R12_scratch2, 0xdead); |
| #endif |
| // We have to initialize some frame slots for native calls (accessed by GC). |
| if (native_call) { |
| __ std(R26_monitor, _ijava_state_neg(monitors), R1_SP); |
| __ std(R14_bcp, _ijava_state_neg(bcp), R1_SP); |
| if (ProfileInterpreter) { __ std(R28_mdx, _ijava_state_neg(mdx), R1_SP); } |
| } |
| #ifdef ASSERT |
| else { |
| __ std(R12_scratch2, _ijava_state_neg(monitors), R1_SP); |
| __ std(R12_scratch2, _ijava_state_neg(bcp), R1_SP); |
| __ std(R12_scratch2, _ijava_state_neg(mdx), R1_SP); |
| } |
| __ std(R11_scratch1, _ijava_state_neg(ijava_reserved), R1_SP); |
| __ std(R12_scratch2, _ijava_state_neg(esp), R1_SP); |
| __ std(R12_scratch2, _ijava_state_neg(lresult), R1_SP); |
| __ std(R12_scratch2, _ijava_state_neg(fresult), R1_SP); |
| #endif |
| __ subf(R12_scratch2, top_frame_size, R1_SP); |
| __ std(R0, _ijava_state_neg(oop_tmp), R1_SP); |
| __ std(R12_scratch2, _ijava_state_neg(top_frame_sp), R1_SP); |
| |
| // Push top frame. |
| __ push_frame(top_frame_size, R11_scratch1); |
| } |
| |
| // End of helpers |
| |
| address TemplateInterpreterGenerator::generate_math_entry(AbstractInterpreter::MethodKind kind) { |
| if (!Interpreter::math_entry_available(kind)) { |
| NOT_PRODUCT(__ should_not_reach_here();) |
| return NULL; |
| } |
| |
| address entry = __ pc(); |
| |
| __ lfd(F1_RET, Interpreter::stackElementSize, R15_esp); |
| |
| // Pop c2i arguments (if any) off when we return. |
| #ifdef ASSERT |
| __ ld(R9_ARG7, 0, R1_SP); |
| __ ld(R10_ARG8, 0, R21_sender_SP); |
| __ cmpd(CCR0, R9_ARG7, R10_ARG8); |
| __ asm_assert_eq("backlink", 0x545); |
| #endif // ASSERT |
| __ mr(R1_SP, R21_sender_SP); // Cut the stack back to where the caller started. |
| |
| if (kind == Interpreter::java_lang_math_sqrt) { |
| __ fsqrt(F1_RET, F1_RET); |
| } else if (kind == Interpreter::java_lang_math_abs) { |
| __ fabs(F1_RET, F1_RET); |
| } else { |
| ShouldNotReachHere(); |
| } |
| |
| // And we're done. |
| __ blr(); |
| |
| __ flush(); |
| |
| return entry; |
| } |
| |
| // Interpreter stub for calling a native method. (asm interpreter) |
| // This sets up a somewhat different looking stack for calling the |
| // native method than the typical interpreter frame setup. |
| // |
| // On entry: |
| // R19_method - method |
| // R16_thread - JavaThread* |
| // R15_esp - intptr_t* sender tos |
| // |
| // abstract stack (grows up) |
| // [ IJava (caller of JNI callee) ] <-- ASP |
| // ... |
| address TemplateInterpreterGenerator::generate_native_entry(bool synchronized) { |
| |
| address entry = __ pc(); |
| |
| const bool inc_counter = UseCompiler || CountCompiledCalls || LogTouchedMethods; |
| |
| // ----------------------------------------------------------------------------- |
| // Allocate a new frame that represents the native callee (i2n frame). |
| // This is not a full-blown interpreter frame, but in particular, the |
| // following registers are valid after this: |
| // - R19_method |
| // - R18_local (points to start of argumuments to native function) |
| // |
| // abstract stack (grows up) |
| // [ IJava (caller of JNI callee) ] <-- ASP |
| // ... |
| |
| const Register signature_handler_fd = R11_scratch1; |
| const Register pending_exception = R0; |
| const Register result_handler_addr = R31; |
| const Register native_method_fd = R11_scratch1; |
| const Register access_flags = R22_tmp2; |
| const Register active_handles = R11_scratch1; // R26_monitor saved to state. |
| const Register sync_state = R12_scratch2; |
| const Register sync_state_addr = sync_state; // Address is dead after use. |
| const Register suspend_flags = R11_scratch1; |
| |
| //============================================================================= |
| // Allocate new frame and initialize interpreter state. |
| |
| Label exception_return; |
| Label exception_return_sync_check; |
| Label stack_overflow_return; |
| |
| // Generate new interpreter state and jump to stack_overflow_return in case of |
| // a stack overflow. |
| //generate_compute_interpreter_state(stack_overflow_return); |
| |
| Register size_of_parameters = R22_tmp2; |
| |
| generate_fixed_frame(true, size_of_parameters, noreg /* unused */); |
| |
| //============================================================================= |
| // Increment invocation counter. On overflow, entry to JNI method |
| // will be compiled. |
| Label invocation_counter_overflow, continue_after_compile; |
| if (inc_counter) { |
| if (synchronized) { |
| // Since at this point in the method invocation the exception handler |
| // would try to exit the monitor of synchronized methods which hasn't |
| // been entered yet, we set the thread local variable |
| // _do_not_unlock_if_synchronized to true. If any exception was thrown by |
| // runtime, exception handling i.e. unlock_if_synchronized_method will |
| // check this thread local flag. |
| // This flag has two effects, one is to force an unwind in the topmost |
| // interpreter frame and not perform an unlock while doing so. |
| __ li(R0, 1); |
| __ stb(R0, in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()), R16_thread); |
| } |
| generate_counter_incr(&invocation_counter_overflow, NULL, NULL); |
| |
| BIND(continue_after_compile); |
| // Reset the _do_not_unlock_if_synchronized flag. |
| if (synchronized) { |
| __ li(R0, 0); |
| __ stb(R0, in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()), R16_thread); |
| } |
| } |
| |
| // access_flags = method->access_flags(); |
| // Load access flags. |
| assert(access_flags->is_nonvolatile(), |
| "access_flags must be in a non-volatile register"); |
| // Type check. |
| assert(4 == sizeof(AccessFlags), "unexpected field size"); |
| __ lwz(access_flags, method_(access_flags)); |
| |
| // We don't want to reload R19_method and access_flags after calls |
| // to some helper functions. |
| assert(R19_method->is_nonvolatile(), |
| "R19_method must be a non-volatile register"); |
| |
| // Check for synchronized methods. Must happen AFTER invocation counter |
| // check, so method is not locked if counter overflows. |
| |
| if (synchronized) { |
| lock_method(access_flags, R11_scratch1, R12_scratch2, true); |
| |
| // Update monitor in state. |
| __ ld(R11_scratch1, 0, R1_SP); |
| __ std(R26_monitor, _ijava_state_neg(monitors), R11_scratch1); |
| } |
| |
| // jvmti/jvmpi support |
| __ notify_method_entry(); |
| |
| //============================================================================= |
| // Get and call the signature handler. |
| |
| __ ld(signature_handler_fd, method_(signature_handler)); |
| Label call_signature_handler; |
| |
| __ cmpdi(CCR0, signature_handler_fd, 0); |
| __ bne(CCR0, call_signature_handler); |
| |
| // Method has never been called. Either generate a specialized |
| // handler or point to the slow one. |
| // |
| // Pass parameter 'false' to avoid exception check in call_VM. |
| __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::prepare_native_call), R19_method, false); |
| |
| // Check for an exception while looking up the target method. If we |
| // incurred one, bail. |
| __ ld(pending_exception, thread_(pending_exception)); |
| __ cmpdi(CCR0, pending_exception, 0); |
| __ bne(CCR0, exception_return_sync_check); // Has pending exception. |
| |
| // Reload signature handler, it may have been created/assigned in the meanwhile. |
| __ ld(signature_handler_fd, method_(signature_handler)); |
| __ twi_0(signature_handler_fd); // Order wrt. load of klass mirror and entry point (isync is below). |
| |
| BIND(call_signature_handler); |
| |
| // Before we call the signature handler we push a new frame to |
| // protect the interpreter frame volatile registers when we return |
| // from jni but before we can get back to Java. |
| |
| // First set the frame anchor while the SP/FP registers are |
| // convenient and the slow signature handler can use this same frame |
| // anchor. |
| |
| // We have a TOP_IJAVA_FRAME here, which belongs to us. |
| __ set_top_ijava_frame_at_SP_as_last_Java_frame(R1_SP, R12_scratch2/*tmp*/); |
| |
| // Now the interpreter frame (and its call chain) have been |
| // invalidated and flushed. We are now protected against eager |
| // being enabled in native code. Even if it goes eager the |
| // registers will be reloaded as clean and we will invalidate after |
| // the call so no spurious flush should be possible. |
| |
| // Call signature handler and pass locals address. |
| // |
| // Our signature handlers copy required arguments to the C stack |
| // (outgoing C args), R3_ARG1 to R10_ARG8, and FARG1 to FARG13. |
| __ mr(R3_ARG1, R18_locals); |
| #if !defined(ABI_ELFv2) |
| __ ld(signature_handler_fd, 0, signature_handler_fd); |
| #endif |
| |
| __ call_stub(signature_handler_fd); |
| |
| // Remove the register parameter varargs slots we allocated in |
| // compute_interpreter_state. SP+16 ends up pointing to the ABI |
| // outgoing argument area. |
| // |
| // Not needed on PPC64. |
| //__ add(SP, SP, Argument::n_register_parameters*BytesPerWord); |
| |
| assert(result_handler_addr->is_nonvolatile(), "result_handler_addr must be in a non-volatile register"); |
| // Save across call to native method. |
| __ mr(result_handler_addr, R3_RET); |
| |
| __ isync(); // Acquire signature handler before trying to fetch the native entry point and klass mirror. |
| |
| // Set up fixed parameters and call the native method. |
| // If the method is static, get mirror into R4_ARG2. |
| { |
| Label method_is_not_static; |
| // Access_flags is non-volatile and still, no need to restore it. |
| |
| // Restore access flags. |
| __ testbitdi(CCR0, R0, access_flags, JVM_ACC_STATIC_BIT); |
| __ bfalse(CCR0, method_is_not_static); |
| |
| // constants = method->constants(); |
| __ ld(R11_scratch1, in_bytes(Method::const_offset()), R19_method); |
| __ ld(R11_scratch1, in_bytes(ConstMethod::constants_offset()), R11_scratch1); |
| // pool_holder = method->constants()->pool_holder(); |
| __ ld(R11_scratch1/*pool_holder*/, ConstantPool::pool_holder_offset_in_bytes(), |
| R11_scratch1/*constants*/); |
| |
| const int mirror_offset = in_bytes(Klass::java_mirror_offset()); |
| |
| // mirror = pool_holder->klass_part()->java_mirror(); |
| __ ld(R0/*mirror*/, mirror_offset, R11_scratch1/*pool_holder*/); |
| // state->_native_mirror = mirror; |
| |
| __ ld(R11_scratch1, 0, R1_SP); |
| __ std(R0/*mirror*/, _ijava_state_neg(oop_tmp), R11_scratch1); |
| // R4_ARG2 = &state->_oop_temp; |
| __ addi(R4_ARG2, R11_scratch1, _ijava_state_neg(oop_tmp)); |
| BIND(method_is_not_static); |
| } |
| |
| // At this point, arguments have been copied off the stack into |
| // their JNI positions. Oops are boxed in-place on the stack, with |
| // handles copied to arguments. The result handler address is in a |
| // register. |
| |
| // Pass JNIEnv address as first parameter. |
| __ addir(R3_ARG1, thread_(jni_environment)); |
| |
| // Load the native_method entry before we change the thread state. |
| __ ld(native_method_fd, method_(native_function)); |
| |
| //============================================================================= |
| // Transition from _thread_in_Java to _thread_in_native. As soon as |
| // we make this change the safepoint code needs to be certain that |
| // the last Java frame we established is good. The pc in that frame |
| // just needs to be near here not an actual return address. |
| |
| // We use release_store_fence to update values like the thread state, where |
| // we don't want the current thread to continue until all our prior memory |
| // accesses (including the new thread state) are visible to other threads. |
| __ li(R0, _thread_in_native); |
| __ release(); |
| |
| // TODO PPC port assert(4 == JavaThread::sz_thread_state(), "unexpected field size"); |
| __ stw(R0, thread_(thread_state)); |
| |
| if (UseMembar) { |
| __ fence(); |
| } |
| |
| //============================================================================= |
| // Call the native method. Argument registers must not have been |
| // overwritten since "__ call_stub(signature_handler);" (except for |
| // ARG1 and ARG2 for static methods). |
| __ call_c(native_method_fd); |
| |
| __ li(R0, 0); |
| __ ld(R11_scratch1, 0, R1_SP); |
| __ std(R3_RET, _ijava_state_neg(lresult), R11_scratch1); |
| __ stfd(F1_RET, _ijava_state_neg(fresult), R11_scratch1); |
| __ std(R0/*mirror*/, _ijava_state_neg(oop_tmp), R11_scratch1); // reset |
| |
| // Note: C++ interpreter needs the following here: |
| // The frame_manager_lr field, which we use for setting the last |
| // java frame, gets overwritten by the signature handler. Restore |
| // it now. |
| //__ get_PC_trash_LR(R11_scratch1); |
| //__ std(R11_scratch1, _top_ijava_frame_abi(frame_manager_lr), R1_SP); |
| |
| // Because of GC R19_method may no longer be valid. |
| |
| // Block, if necessary, before resuming in _thread_in_Java state. |
| // In order for GC to work, don't clear the last_Java_sp until after |
| // blocking. |
| |
| //============================================================================= |
| // Switch thread to "native transition" state before reading the |
| // synchronization state. This additional state is necessary |
| // because reading and testing the synchronization state is not |
| // atomic w.r.t. GC, as this scenario demonstrates: Java thread A, |
| // in _thread_in_native state, loads _not_synchronized and is |
| // preempted. VM thread changes sync state to synchronizing and |
| // suspends threads for GC. Thread A is resumed to finish this |
| // native method, but doesn't block here since it didn't see any |
| // synchronization in progress, and escapes. |
| |
| // We use release_store_fence to update values like the thread state, where |
| // we don't want the current thread to continue until all our prior memory |
| // accesses (including the new thread state) are visible to other threads. |
| __ li(R0/*thread_state*/, _thread_in_native_trans); |
| __ release(); |
| __ stw(R0/*thread_state*/, thread_(thread_state)); |
| if (UseMembar) { |
| __ fence(); |
| } |
| // Write serialization page so that the VM thread can do a pseudo remote |
| // membar. We use the current thread pointer to calculate a thread |
| // specific offset to write to within the page. This minimizes bus |
| // traffic due to cache line collision. |
| else { |
| __ serialize_memory(R16_thread, R11_scratch1, R12_scratch2); |
| } |
| |
| // Now before we return to java we must look for a current safepoint |
| // (a new safepoint can not start since we entered native_trans). |
| // We must check here because a current safepoint could be modifying |
| // the callers registers right this moment. |
| |
| // Acquire isn't strictly necessary here because of the fence, but |
| // sync_state is declared to be volatile, so we do it anyway |
| // (cmp-br-isync on one path, release (same as acquire on PPC64) on the other path). |
| int sync_state_offs = __ load_const_optimized(sync_state_addr, SafepointSynchronize::address_of_state(), /*temp*/R0, true); |
| |
| // TODO PPC port assert(4 == SafepointSynchronize::sz_state(), "unexpected field size"); |
| __ lwz(sync_state, sync_state_offs, sync_state_addr); |
| |
| // TODO PPC port assert(4 == Thread::sz_suspend_flags(), "unexpected field size"); |
| __ lwz(suspend_flags, thread_(suspend_flags)); |
| |
| Label sync_check_done; |
| Label do_safepoint; |
| // No synchronization in progress nor yet synchronized. |
| __ cmpwi(CCR0, sync_state, SafepointSynchronize::_not_synchronized); |
| // Not suspended. |
| __ cmpwi(CCR1, suspend_flags, 0); |
| |
| __ bne(CCR0, do_safepoint); |
| __ beq(CCR1, sync_check_done); |
| __ bind(do_safepoint); |
| __ isync(); |
| // Block. We do the call directly and leave the current |
| // last_Java_frame setup undisturbed. We must save any possible |
| // native result across the call. No oop is present. |
| |
| __ mr(R3_ARG1, R16_thread); |
| #if defined(ABI_ELFv2) |
| __ call_c(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans), |
| relocInfo::none); |
| #else |
| __ call_c(CAST_FROM_FN_PTR(FunctionDescriptor*, JavaThread::check_special_condition_for_native_trans), |
| relocInfo::none); |
| #endif |
| |
| __ bind(sync_check_done); |
| |
| //============================================================================= |
| // <<<<<< Back in Interpreter Frame >>>>> |
| |
| // We are in thread_in_native_trans here and back in the normal |
| // interpreter frame. We don't have to do anything special about |
| // safepoints and we can switch to Java mode anytime we are ready. |
| |
| // Note: frame::interpreter_frame_result has a dependency on how the |
| // method result is saved across the call to post_method_exit. For |
| // native methods it assumes that the non-FPU/non-void result is |
| // saved in _native_lresult and a FPU result in _native_fresult. If |
| // this changes then the interpreter_frame_result implementation |
| // will need to be updated too. |
| |
| // On PPC64, we have stored the result directly after the native call. |
| |
| //============================================================================= |
| // Back in Java |
| |
| // We use release_store_fence to update values like the thread state, where |
| // we don't want the current thread to continue until all our prior memory |
| // accesses (including the new thread state) are visible to other threads. |
| __ li(R0/*thread_state*/, _thread_in_Java); |
| __ release(); |
| __ stw(R0/*thread_state*/, thread_(thread_state)); |
| if (UseMembar) { |
| __ fence(); |
| } |
| |
| __ reset_last_Java_frame(); |
| |
| // Jvmdi/jvmpi support. Whether we've got an exception pending or |
| // not, and whether unlocking throws an exception or not, we notify |
| // on native method exit. If we do have an exception, we'll end up |
| // in the caller's context to handle it, so if we don't do the |
| // notify here, we'll drop it on the floor. |
| __ notify_method_exit(true/*native method*/, |
| ilgl /*illegal state (not used for native methods)*/, |
| InterpreterMacroAssembler::NotifyJVMTI, |
| false /*check_exceptions*/); |
| |
| //============================================================================= |
| // Handle exceptions |
| |
| if (synchronized) { |
| // Don't check for exceptions since we're still in the i2n frame. Do that |
| // manually afterwards. |
| unlock_method(false); |
| } |
| |
| // Reset active handles after returning from native. |
| // thread->active_handles()->clear(); |
| __ ld(active_handles, thread_(active_handles)); |
| // TODO PPC port assert(4 == JNIHandleBlock::top_size_in_bytes(), "unexpected field size"); |
| __ li(R0, 0); |
| __ stw(R0, JNIHandleBlock::top_offset_in_bytes(), active_handles); |
| |
| Label exception_return_sync_check_already_unlocked; |
| __ ld(R0/*pending_exception*/, thread_(pending_exception)); |
| __ cmpdi(CCR0, R0/*pending_exception*/, 0); |
| __ bne(CCR0, exception_return_sync_check_already_unlocked); |
| |
| //----------------------------------------------------------------------------- |
| // No exception pending. |
| |
| // Move native method result back into proper registers and return. |
| // Invoke result handler (may unbox/promote). |
| __ ld(R11_scratch1, 0, R1_SP); |
| __ ld(R3_RET, _ijava_state_neg(lresult), R11_scratch1); |
| __ lfd(F1_RET, _ijava_state_neg(fresult), R11_scratch1); |
| __ call_stub(result_handler_addr); |
| |
| __ merge_frames(/*top_frame_sp*/ R21_sender_SP, /*return_pc*/ R0, R11_scratch1, R12_scratch2); |
| |
| // Must use the return pc which was loaded from the caller's frame |
| // as the VM uses return-pc-patching for deoptimization. |
| __ mtlr(R0); |
| __ blr(); |
| |
| //----------------------------------------------------------------------------- |
| // An exception is pending. We call into the runtime only if the |
| // caller was not interpreted. If it was interpreted the |
| // interpreter will do the correct thing. If it isn't interpreted |
| // (call stub/compiled code) we will change our return and continue. |
| |
| BIND(exception_return_sync_check); |
| |
| if (synchronized) { |
| // Don't check for exceptions since we're still in the i2n frame. Do that |
| // manually afterwards. |
| unlock_method(false); |
| } |
| BIND(exception_return_sync_check_already_unlocked); |
| |
| const Register return_pc = R31; |
| |
| __ ld(return_pc, 0, R1_SP); |
| __ ld(return_pc, _abi(lr), return_pc); |
| |
| // Get the address of the exception handler. |
| __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address), |
| R16_thread, |
| return_pc /* return pc */); |
| __ merge_frames(/*top_frame_sp*/ R21_sender_SP, noreg, R11_scratch1, R12_scratch2); |
| |
| // Load the PC of the the exception handler into LR. |
| __ mtlr(R3_RET); |
| |
| // Load exception into R3_ARG1 and clear pending exception in thread. |
| __ ld(R3_ARG1/*exception*/, thread_(pending_exception)); |
| __ li(R4_ARG2, 0); |
| __ std(R4_ARG2, thread_(pending_exception)); |
| |
| // Load the original return pc into R4_ARG2. |
| __ mr(R4_ARG2/*issuing_pc*/, return_pc); |
| |
| // Return to exception handler. |
| __ blr(); |
| |
| //============================================================================= |
| // Counter overflow. |
| |
| if (inc_counter) { |
| // Handle invocation counter overflow. |
| __ bind(invocation_counter_overflow); |
| |
| generate_counter_overflow(continue_after_compile); |
| } |
| |
| return entry; |
| } |
| |
| // Generic interpreted method entry to (asm) interpreter. |
| // |
| address TemplateInterpreterGenerator::generate_normal_entry(bool synchronized) { |
| bool inc_counter = UseCompiler || CountCompiledCalls || LogTouchedMethods; |
| address entry = __ pc(); |
| // Generate the code to allocate the interpreter stack frame. |
| Register Rsize_of_parameters = R4_ARG2, // Written by generate_fixed_frame. |
| Rsize_of_locals = R5_ARG3; // Written by generate_fixed_frame. |
| |
| generate_fixed_frame(false, Rsize_of_parameters, Rsize_of_locals); |
| |
| // -------------------------------------------------------------------------- |
| // Zero out non-parameter locals. |
| // Note: *Always* zero out non-parameter locals as Sparc does. It's not |
| // worth to ask the flag, just do it. |
| Register Rslot_addr = R6_ARG4, |
| Rnum = R7_ARG5; |
| Label Lno_locals, Lzero_loop; |
| |
| // Set up the zeroing loop. |
| __ subf(Rnum, Rsize_of_parameters, Rsize_of_locals); |
| __ subf(Rslot_addr, Rsize_of_parameters, R18_locals); |
| __ srdi_(Rnum, Rnum, Interpreter::logStackElementSize); |
| __ beq(CCR0, Lno_locals); |
| __ li(R0, 0); |
| __ mtctr(Rnum); |
| |
| // The zero locals loop. |
| __ bind(Lzero_loop); |
| __ std(R0, 0, Rslot_addr); |
| __ addi(Rslot_addr, Rslot_addr, -Interpreter::stackElementSize); |
| __ bdnz(Lzero_loop); |
| |
| __ bind(Lno_locals); |
| |
| // -------------------------------------------------------------------------- |
| // Counter increment and overflow check. |
| Label invocation_counter_overflow, |
| profile_method, |
| profile_method_continue; |
| if (inc_counter || ProfileInterpreter) { |
| |
| Register Rdo_not_unlock_if_synchronized_addr = R11_scratch1; |
| if (synchronized) { |
| // Since at this point in the method invocation the exception handler |
| // would try to exit the monitor of synchronized methods which hasn't |
| // been entered yet, we set the thread local variable |
| // _do_not_unlock_if_synchronized to true. If any exception was thrown by |
| // runtime, exception handling i.e. unlock_if_synchronized_method will |
| // check this thread local flag. |
| // This flag has two effects, one is to force an unwind in the topmost |
| // interpreter frame and not perform an unlock while doing so. |
| __ li(R0, 1); |
| __ stb(R0, in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()), R16_thread); |
| } |
| |
| // Argument and return type profiling. |
| __ profile_parameters_type(R3_ARG1, R4_ARG2, R5_ARG3, R6_ARG4); |
| |
| // Increment invocation counter and check for overflow. |
| if (inc_counter) { |
| generate_counter_incr(&invocation_counter_overflow, &profile_method, &profile_method_continue); |
| } |
| |
| __ bind(profile_method_continue); |
| |
| // Reset the _do_not_unlock_if_synchronized flag. |
| if (synchronized) { |
| __ li(R0, 0); |
| __ stb(R0, in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()), R16_thread); |
| } |
| } |
| |
| // -------------------------------------------------------------------------- |
| // Locking of synchronized methods. Must happen AFTER invocation_counter |
| // check and stack overflow check, so method is not locked if overflows. |
| if (synchronized) { |
| lock_method(R3_ARG1, R4_ARG2, R5_ARG3); |
| } |
| #ifdef ASSERT |
| else { |
| Label Lok; |
| __ lwz(R0, in_bytes(Method::access_flags_offset()), R19_method); |
| __ andi_(R0, R0, JVM_ACC_SYNCHRONIZED); |
| __ asm_assert_eq("method needs synchronization", 0x8521); |
| __ bind(Lok); |
| } |
| #endif // ASSERT |
| |
| __ verify_thread(); |
| |
| // -------------------------------------------------------------------------- |
| // JVMTI support |
| __ notify_method_entry(); |
| |
| // -------------------------------------------------------------------------- |
| // Start executing instructions. |
| __ dispatch_next(vtos); |
| |
| // -------------------------------------------------------------------------- |
| // Out of line counter overflow and MDO creation code. |
| if (ProfileInterpreter) { |
| // We have decided to profile this method in the interpreter. |
| __ bind(profile_method); |
| __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method)); |
| __ set_method_data_pointer_for_bcp(); |
| __ b(profile_method_continue); |
| } |
| |
| if (inc_counter) { |
| // Handle invocation counter overflow. |
| __ bind(invocation_counter_overflow); |
| generate_counter_overflow(profile_method_continue); |
| } |
| return entry; |
| } |
| |
| // CRC32 Intrinsics. |
| // |
| // Contract on scratch and work registers. |
| // ======================================= |
| // |
| // On ppc, the register set {R2..R12} is available in the interpreter as scratch/work registers. |
| // You should, however, keep in mind that {R3_ARG1..R10_ARG8} is the C-ABI argument register set. |
| // You can't rely on these registers across calls. |
| // |
| // The generators for CRC32_update and for CRC32_updateBytes use the |
| // scratch/work register set internally, passing the work registers |
| // as arguments to the MacroAssembler emitters as required. |
| // |
| // R3_ARG1..R6_ARG4 are preset to hold the incoming java arguments. |
| // Their contents is not constant but may change according to the requirements |
| // of the emitted code. |
| // |
| // All other registers from the scratch/work register set are used "internally" |
| // and contain garbage (i.e. unpredictable values) once blr() is reached. |
| // Basically, only R3_RET contains a defined value which is the function result. |
| // |
| /** |
| * Method entry for static native methods: |
| * int java.util.zip.CRC32.update(int crc, int b) |
| */ |
| address TemplateInterpreterGenerator::generate_CRC32_update_entry() { |
| if (UseCRC32Intrinsics) { |
| address start = __ pc(); // Remember stub start address (is rtn value). |
| Label slow_path; |
| |
| // Safepoint check |
| const Register sync_state = R11_scratch1; |
| int sync_state_offs = __ load_const_optimized(sync_state, SafepointSynchronize::address_of_state(), /*temp*/R0, true); |
| __ lwz(sync_state, sync_state_offs, sync_state); |
| __ cmpwi(CCR0, sync_state, SafepointSynchronize::_not_synchronized); |
| __ bne(CCR0, slow_path); |
| |
| // We don't generate local frame and don't align stack because |
| // we not even call stub code (we generate the code inline) |
| // and there is no safepoint on this path. |
| |
| // Load java parameters. |
| // R15_esp is callers operand stack pointer, i.e. it points to the parameters. |
| const Register argP = R15_esp; |
| const Register crc = R3_ARG1; // crc value |
| const Register data = R4_ARG2; // address of java byte value (kernel_crc32 needs address) |
| const Register dataLen = R5_ARG3; // source data len (1 byte). Not used because calling the single-byte emitter. |
| const Register table = R6_ARG4; // address of crc32 table |
| const Register tmp = dataLen; // Reuse unused len register to show we don't actually need a separate tmp here. |
| |
| BLOCK_COMMENT("CRC32_update {"); |
| |
| // Arguments are reversed on java expression stack |
| #ifdef VM_LITTLE_ENDIAN |
| __ addi(data, argP, 0+1*wordSize); // (stack) address of byte value. Emitter expects address, not value. |
| // Being passed as an int, the single byte is at offset +0. |
| #else |
| __ addi(data, argP, 3+1*wordSize); // (stack) address of byte value. Emitter expects address, not value. |
| // Being passed from java as an int, the single byte is at offset +3. |
| #endif |
| __ lwz(crc, 2*wordSize, argP); // Current crc state, zero extend to 64 bit to have a clean register. |
| |
| StubRoutines::ppc64::generate_load_crc_table_addr(_masm, table); |
| __ kernel_crc32_singleByte(crc, data, dataLen, table, tmp); |
| |
| // Restore caller sp for c2i case and return. |
| __ mr(R1_SP, R21_sender_SP); // Cut the stack back to where the caller started. |
| __ blr(); |
| |
| // Generate a vanilla native entry as the slow path. |
| BLOCK_COMMENT("} CRC32_update"); |
| BIND(slow_path); |
| __ jump_to_entry(Interpreter::entry_for_kind(Interpreter::native), R11_scratch1); |
| return start; |
| } |
| |
| return NULL; |
| } |
| |
| // CRC32 Intrinsics. |
| /** |
| * Method entry for static native methods: |
| * int java.util.zip.CRC32.updateBytes( int crc, byte[] b, int off, int len) |
| * int java.util.zip.CRC32.updateByteBuffer(int crc, long* buf, int off, int len) |
| */ |
| address TemplateInterpreterGenerator::generate_CRC32_updateBytes_entry(AbstractInterpreter::MethodKind kind) { |
| if (UseCRC32Intrinsics) { |
| address start = __ pc(); // Remember stub start address (is rtn value). |
| Label slow_path; |
| |
| // Safepoint check |
| const Register sync_state = R11_scratch1; |
| int sync_state_offs = __ load_const_optimized(sync_state, SafepointSynchronize::address_of_state(), /*temp*/R0, true); |
| __ lwz(sync_state, sync_state_offs, sync_state); |
| __ cmpwi(CCR0, sync_state, SafepointSynchronize::_not_synchronized); |
| __ bne(CCR0, slow_path); |
| |
| // We don't generate local frame and don't align stack because |
| // we not even call stub code (we generate the code inline) |
| // and there is no safepoint on this path. |
| |
| // Load parameters. |
| // Z_esp is callers operand stack pointer, i.e. it points to the parameters. |
| const Register argP = R15_esp; |
| const Register crc = R3_ARG1; // crc value |
| const Register data = R4_ARG2; // address of java byte array |
| const Register dataLen = R5_ARG3; // source data len |
| const Register table = R6_ARG4; // address of crc32 table |
| |
| const Register t0 = R9; // scratch registers for crc calculation |
| const Register t1 = R10; |
| const Register t2 = R11; |
| const Register t3 = R12; |
| |
| const Register tc0 = R2; // registers to hold pre-calculated column addresses |
| const Register tc1 = R7; |
| const Register tc2 = R8; |
| const Register tc3 = table; // table address is reconstructed at the end of kernel_crc32_* emitters |
| |
| const Register tmp = t0; // Only used very locally to calculate byte buffer address. |
| |
| // Arguments are reversed on java expression stack. |
| // Calculate address of start element. |
| if (kind == Interpreter::java_util_zip_CRC32_updateByteBuffer) { // Used for "updateByteBuffer direct". |
| BLOCK_COMMENT("CRC32_updateByteBuffer {"); |
| // crc @ (SP + 5W) (32bit) |
| // buf @ (SP + 3W) (64bit ptr to long array) |
| // off @ (SP + 2W) (32bit) |
| // dataLen @ (SP + 1W) (32bit) |
| // data = buf + off |
| __ ld( data, 3*wordSize, argP); // start of byte buffer |
| __ lwa( tmp, 2*wordSize, argP); // byte buffer offset |
| __ lwa( dataLen, 1*wordSize, argP); // #bytes to process |
| __ lwz( crc, 5*wordSize, argP); // current crc state |
| __ add( data, data, tmp); // Add byte buffer offset. |
| } else { // Used for "updateBytes update". |
| BLOCK_COMMENT("CRC32_updateBytes {"); |
| // crc @ (SP + 4W) (32bit) |
| // buf @ (SP + 3W) (64bit ptr to byte array) |
| // off @ (SP + 2W) (32bit) |
| // dataLen @ (SP + 1W) (32bit) |
| // data = buf + off + base_offset |
| __ ld( data, 3*wordSize, argP); // start of byte buffer |
| __ lwa( tmp, 2*wordSize, argP); // byte buffer offset |
| __ lwa( dataLen, 1*wordSize, argP); // #bytes to process |
| __ add( data, data, tmp); // add byte buffer offset |
| __ lwz( crc, 4*wordSize, argP); // current crc state |
| __ addi(data, data, arrayOopDesc::base_offset_in_bytes(T_BYTE)); |
| } |
| |
| StubRoutines::ppc64::generate_load_crc_table_addr(_masm, table); |
| |
| // Performance measurements show the 1word and 2word variants to be almost equivalent, |
| // with very light advantages for the 1word variant. We chose the 1word variant for |
| // code compactness. |
| __ kernel_crc32_1word(crc, data, dataLen, table, t0, t1, t2, t3, tc0, tc1, tc2, tc3); |
| |
| // Restore caller sp for c2i case and return. |
| __ mr(R1_SP, R21_sender_SP); // Cut the stack back to where the caller started. |
| __ blr(); |
| |
| // Generate a vanilla native entry as the slow path. |
| BLOCK_COMMENT("} CRC32_updateBytes(Buffer)"); |
| BIND(slow_path); |
| __ jump_to_entry(Interpreter::entry_for_kind(Interpreter::native), R11_scratch1); |
| return start; |
| } |
| |
| return NULL; |
| } |
| |
| // Not supported |
| address TemplateInterpreterGenerator::generate_CRC32C_updateBytes_entry(AbstractInterpreter::MethodKind kind) { |
| return NULL; |
| } |
| |
| // ============================================================================= |
| // Exceptions |
| |
| void TemplateInterpreterGenerator::generate_throw_exception() { |
| Register Rexception = R17_tos, |
| Rcontinuation = R3_RET; |
| |
| // -------------------------------------------------------------------------- |
| // Entry point if an method returns with a pending exception (rethrow). |
| Interpreter::_rethrow_exception_entry = __ pc(); |
| { |
| __ restore_interpreter_state(R11_scratch1); // Sets R11_scratch1 = fp. |
| __ ld(R12_scratch2, _ijava_state_neg(top_frame_sp), R11_scratch1); |
| __ resize_frame_absolute(R12_scratch2, R11_scratch1, R0); |
| |
| // Compiled code destroys templateTableBase, reload. |
| __ load_const_optimized(R25_templateTableBase, (address)Interpreter::dispatch_table((TosState)0), R11_scratch1); |
| } |
| |
| // Entry point if a interpreted method throws an exception (throw). |
| Interpreter::_throw_exception_entry = __ pc(); |
| { |
| __ mr(Rexception, R3_RET); |
| |
| __ verify_thread(); |
| __ verify_oop(Rexception); |
| |
| // Expression stack must be empty before entering the VM in case of an exception. |
| __ empty_expression_stack(); |
| // Find exception handler address and preserve exception oop. |
| // Call C routine to find handler and jump to it. |
| __ call_VM(Rexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::exception_handler_for_exception), Rexception); |
| __ mtctr(Rcontinuation); |
| // Push exception for exception handler bytecodes. |
| __ push_ptr(Rexception); |
| |
| // Jump to exception handler (may be remove activation entry!). |
| __ bctr(); |
| } |
| |
| // If the exception is not handled in the current frame the frame is |
| // removed and the exception is rethrown (i.e. exception |
| // continuation is _rethrow_exception). |
| // |
| // Note: At this point the bci is still the bxi for the instruction |
| // which caused the exception and the expression stack is |
| // empty. Thus, for any VM calls at this point, GC will find a legal |
| // oop map (with empty expression stack). |
| |
| // In current activation |
| // tos: exception |
| // bcp: exception bcp |
| |
| // -------------------------------------------------------------------------- |
| // JVMTI PopFrame support |
| |
| Interpreter::_remove_activation_preserving_args_entry = __ pc(); |
| { |
| // Set the popframe_processing bit in popframe_condition indicating that we are |
| // currently handling popframe, so that call_VMs that may happen later do not |
| // trigger new popframe handling cycles. |
| __ lwz(R11_scratch1, in_bytes(JavaThread::popframe_condition_offset()), R16_thread); |
| __ ori(R11_scratch1, R11_scratch1, JavaThread::popframe_processing_bit); |
| __ stw(R11_scratch1, in_bytes(JavaThread::popframe_condition_offset()), R16_thread); |
| |
| // Empty the expression stack, as in normal exception handling. |
| __ empty_expression_stack(); |
| __ unlock_if_synchronized_method(vtos, /* throw_monitor_exception */ false, /* install_monitor_exception */ false); |
| |
| // Check to see whether we are returning to a deoptimized frame. |
| // (The PopFrame call ensures that the caller of the popped frame is |
| // either interpreted or compiled and deoptimizes it if compiled.) |
| // Note that we don't compare the return PC against the |
| // deoptimization blob's unpack entry because of the presence of |
| // adapter frames in C2. |
| Label Lcaller_not_deoptimized; |
| Register return_pc = R3_ARG1; |
| __ ld(return_pc, 0, R1_SP); |
| __ ld(return_pc, _abi(lr), return_pc); |
| __ call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::interpreter_contains), return_pc); |
| __ cmpdi(CCR0, R3_RET, 0); |
| __ bne(CCR0, Lcaller_not_deoptimized); |
| |
| // The deoptimized case. |
| // In this case, we can't call dispatch_next() after the frame is |
| // popped, but instead must save the incoming arguments and restore |
| // them after deoptimization has occurred. |
| __ ld(R4_ARG2, in_bytes(Method::const_offset()), R19_method); |
| __ lhz(R4_ARG2 /* number of params */, in_bytes(ConstMethod::size_of_parameters_offset()), R4_ARG2); |
| __ slwi(R4_ARG2, R4_ARG2, Interpreter::logStackElementSize); |
| __ addi(R5_ARG3, R18_locals, Interpreter::stackElementSize); |
| __ subf(R5_ARG3, R4_ARG2, R5_ARG3); |
| // Save these arguments. |
| __ call_VM_leaf(CAST_FROM_FN_PTR(address, Deoptimization::popframe_preserve_args), R16_thread, R4_ARG2, R5_ARG3); |
| |
| // Inform deoptimization that it is responsible for restoring these arguments. |
| __ load_const_optimized(R11_scratch1, JavaThread::popframe_force_deopt_reexecution_bit); |
| __ stw(R11_scratch1, in_bytes(JavaThread::popframe_condition_offset()), R16_thread); |
| |
| // Return from the current method into the deoptimization blob. Will eventually |
| // end up in the deopt interpeter entry, deoptimization prepared everything that |
| // we will reexecute the call that called us. |
| __ merge_frames(/*top_frame_sp*/ R21_sender_SP, /*reload return_pc*/ return_pc, R11_scratch1, R12_scratch2); |
| __ mtlr(return_pc); |
| __ blr(); |
| |
| // The non-deoptimized case. |
| __ bind(Lcaller_not_deoptimized); |
| |
| // Clear the popframe condition flag. |
| __ li(R0, 0); |
| __ stw(R0, in_bytes(JavaThread::popframe_condition_offset()), R16_thread); |
| |
| // Get out of the current method and re-execute the call that called us. |
| __ merge_frames(/*top_frame_sp*/ R21_sender_SP, /*return_pc*/ noreg, R11_scratch1, R12_scratch2); |
| __ restore_interpreter_state(R11_scratch1); |
| __ ld(R12_scratch2, _ijava_state_neg(top_frame_sp), R11_scratch1); |
| __ resize_frame_absolute(R12_scratch2, R11_scratch1, R0); |
| if (ProfileInterpreter) { |
| __ set_method_data_pointer_for_bcp(); |
| __ ld(R11_scratch1, 0, R1_SP); |
| __ std(R28_mdx, _ijava_state_neg(mdx), R11_scratch1); |
| } |
| #if INCLUDE_JVMTI |
| Label L_done; |
| |
| __ lbz(R11_scratch1, 0, R14_bcp); |
| __ cmpwi(CCR0, R11_scratch1, Bytecodes::_invokestatic); |
| __ bne(CCR0, L_done); |
| |
| // The member name argument must be restored if _invokestatic is re-executed after a PopFrame call. |
| // Detect such a case in the InterpreterRuntime function and return the member name argument, or NULL. |
| __ ld(R4_ARG2, 0, R18_locals); |
| __ MacroAssembler::call_VM(R4_ARG2, CAST_FROM_FN_PTR(address, InterpreterRuntime::member_name_arg_or_null), R4_ARG2, R19_method, R14_bcp, false); |
| __ restore_interpreter_state(R11_scratch1, /*bcp_and_mdx_only*/ true); |
| __ cmpdi(CCR0, R4_ARG2, 0); |
| __ beq(CCR0, L_done); |
| __ std(R4_ARG2, wordSize, R15_esp); |
| __ bind(L_done); |
| #endif // INCLUDE_JVMTI |
| __ dispatch_next(vtos); |
| } |
| // end of JVMTI PopFrame support |
| |
| // -------------------------------------------------------------------------- |
| // Remove activation exception entry. |
| // This is jumped to if an interpreted method can't handle an exception itself |
| // (we come from the throw/rethrow exception entry above). We're going to call |
| // into the VM to find the exception handler in the caller, pop the current |
| // frame and return the handler we calculated. |
| Interpreter::_remove_activation_entry = __ pc(); |
| { |
| __ pop_ptr(Rexception); |
| __ verify_thread(); |
| __ verify_oop(Rexception); |
| __ std(Rexception, in_bytes(JavaThread::vm_result_offset()), R16_thread); |
| |
| __ unlock_if_synchronized_method(vtos, /* throw_monitor_exception */ false, true); |
| __ notify_method_exit(false, vtos, InterpreterMacroAssembler::SkipNotifyJVMTI, false); |
| |
| __ get_vm_result(Rexception); |
| |
| // We are done with this activation frame; find out where to go next. |
| // The continuation point will be an exception handler, which expects |
| // the following registers set up: |
| // |
| // RET: exception oop |
| // ARG2: Issuing PC (see generate_exception_blob()), only used if the caller is compiled. |
| |
| Register return_pc = R31; // Needs to survive the runtime call. |
| __ ld(return_pc, 0, R1_SP); |
| __ ld(return_pc, _abi(lr), return_pc); |
| __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address), R16_thread, return_pc); |
| |
| // Remove the current activation. |
| __ merge_frames(/*top_frame_sp*/ R21_sender_SP, /*return_pc*/ noreg, R11_scratch1, R12_scratch2); |
| |
| __ mr(R4_ARG2, return_pc); |
| __ mtlr(R3_RET); |
| __ mr(R3_RET, Rexception); |
| __ blr(); |
| } |
| } |
| |
| // JVMTI ForceEarlyReturn support. |
| // Returns "in the middle" of a method with a "fake" return value. |
| address TemplateInterpreterGenerator::generate_earlyret_entry_for(TosState state) { |
| |
| Register Rscratch1 = R11_scratch1, |
| Rscratch2 = R12_scratch2; |
| |
| address entry = __ pc(); |
| __ empty_expression_stack(); |
| |
| __ load_earlyret_value(state, Rscratch1); |
| |
| __ ld(Rscratch1, in_bytes(JavaThread::jvmti_thread_state_offset()), R16_thread); |
| // Clear the earlyret state. |
| __ li(R0, 0); |
| __ stw(R0, in_bytes(JvmtiThreadState::earlyret_state_offset()), Rscratch1); |
| |
| __ remove_activation(state, false, false); |
| // Copied from TemplateTable::_return. |
| // Restoration of lr done by remove_activation. |
| switch (state) { |
| case ltos: |
| case btos: |
| case ctos: |
| case stos: |
| case atos: |
| case itos: __ mr(R3_RET, R17_tos); break; |
| case ftos: |
| case dtos: __ fmr(F1_RET, F15_ftos); break; |
| case vtos: // This might be a constructor. Final fields (and volatile fields on PPC64) need |
| // to get visible before the reference to the object gets stored anywhere. |
| __ membar(Assembler::StoreStore); break; |
| default : ShouldNotReachHere(); |
| } |
| __ blr(); |
| |
| return entry; |
| } // end of ForceEarlyReturn support |
| |
| //----------------------------------------------------------------------------- |
| // Helper for vtos entry point generation |
| |
| void TemplateInterpreterGenerator::set_vtos_entry_points(Template* t, |
| address& bep, |
| address& cep, |
| address& sep, |
| address& aep, |
| address& iep, |
| address& lep, |
| address& fep, |
| address& dep, |
| address& vep) { |
| assert(t->is_valid() && t->tos_in() == vtos, "illegal template"); |
| Label L; |
| |
| aep = __ pc(); __ push_ptr(); __ b(L); |
| fep = __ pc(); __ push_f(); __ b(L); |
| dep = __ pc(); __ push_d(); __ b(L); |
| lep = __ pc(); __ push_l(); __ b(L); |
| __ align(32, 12, 24); // align L |
| bep = cep = sep = |
| iep = __ pc(); __ push_i(); |
| vep = __ pc(); |
| __ bind(L); |
| generate_and_dispatch(t); |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| // Non-product code |
| #ifndef PRODUCT |
| address TemplateInterpreterGenerator::generate_trace_code(TosState state) { |
| //__ flush_bundle(); |
| address entry = __ pc(); |
| |
| const char *bname = NULL; |
| uint tsize = 0; |
| switch(state) { |
| case ftos: |
| bname = "trace_code_ftos {"; |
| tsize = 2; |
| break; |
| case btos: |
| bname = "trace_code_btos {"; |
| tsize = 2; |
| break; |
| case ctos: |
| bname = "trace_code_ctos {"; |
| tsize = 2; |
| break; |
| case stos: |
| bname = "trace_code_stos {"; |
| tsize = 2; |
| break; |
| case itos: |
| bname = "trace_code_itos {"; |
| tsize = 2; |
| break; |
| case ltos: |
| bname = "trace_code_ltos {"; |
| tsize = 3; |
| break; |
| case atos: |
| bname = "trace_code_atos {"; |
| tsize = 2; |
| break; |
| case vtos: |
| // Note: In case of vtos, the topmost of stack value could be a int or doubl |
| // In case of a double (2 slots) we won't see the 2nd stack value. |
| // Maybe we simply should print the topmost 3 stack slots to cope with the problem. |
| bname = "trace_code_vtos {"; |
| tsize = 2; |
| |
| break; |
| case dtos: |
| bname = "trace_code_dtos {"; |
| tsize = 3; |
| break; |
| default: |
| ShouldNotReachHere(); |
| } |
| BLOCK_COMMENT(bname); |
| |
| // Support short-cut for TraceBytecodesAt. |
| // Don't call into the VM if we don't want to trace to speed up things. |
| Label Lskip_vm_call; |
| if (TraceBytecodesAt > 0 && TraceBytecodesAt < max_intx) { |
| int offs1 = __ load_const_optimized(R11_scratch1, (address) &TraceBytecodesAt, R0, true); |
| int offs2 = __ load_const_optimized(R12_scratch2, (address) &BytecodeCounter::_counter_value, R0, true); |
| __ ld(R11_scratch1, offs1, R11_scratch1); |
| __ lwa(R12_scratch2, offs2, R12_scratch2); |
| __ cmpd(CCR0, R12_scratch2, R11_scratch1); |
| __ blt(CCR0, Lskip_vm_call); |
| } |
| |
| __ push(state); |
| // Load 2 topmost expression stack values. |
| __ ld(R6_ARG4, tsize*Interpreter::stackElementSize, R15_esp); |
| __ ld(R5_ARG3, Interpreter::stackElementSize, R15_esp); |
| __ mflr(R31); |
| __ call_VM(noreg, CAST_FROM_FN_PTR(address, SharedRuntime::trace_bytecode), /* unused */ R4_ARG2, R5_ARG3, R6_ARG4, false); |
| __ mtlr(R31); |
| __ pop(state); |
| |
| if (TraceBytecodesAt > 0 && TraceBytecodesAt < max_intx) { |
| __ bind(Lskip_vm_call); |
| } |
| __ blr(); |
| BLOCK_COMMENT("} trace_code"); |
| return entry; |
| } |
| |
| void TemplateInterpreterGenerator::count_bytecode() { |
| int offs = __ load_const_optimized(R11_scratch1, (address) &BytecodeCounter::_counter_value, R12_scratch2, true); |
| __ lwz(R12_scratch2, offs, R11_scratch1); |
| __ addi(R12_scratch2, R12_scratch2, 1); |
| __ stw(R12_scratch2, offs, R11_scratch1); |
| } |
| |
| void TemplateInterpreterGenerator::histogram_bytecode(Template* t) { |
| int offs = __ load_const_optimized(R11_scratch1, (address) &BytecodeHistogram::_counters[t->bytecode()], R12_scratch2, true); |
| __ lwz(R12_scratch2, offs, R11_scratch1); |
| __ addi(R12_scratch2, R12_scratch2, 1); |
| __ stw(R12_scratch2, offs, R11_scratch1); |
| } |
| |
| void TemplateInterpreterGenerator::histogram_bytecode_pair(Template* t) { |
| const Register addr = R11_scratch1, |
| tmp = R12_scratch2; |
| // Get index, shift out old bytecode, bring in new bytecode, and store it. |
| // _index = (_index >> log2_number_of_codes) | |
| // (bytecode << log2_number_of_codes); |
| int offs1 = __ load_const_optimized(addr, (address)&BytecodePairHistogram::_index, tmp, true); |
| __ lwz(tmp, offs1, addr); |
| __ srwi(tmp, tmp, BytecodePairHistogram::log2_number_of_codes); |
| __ ori(tmp, tmp, ((int) t->bytecode()) << BytecodePairHistogram::log2_number_of_codes); |
| __ stw(tmp, offs1, addr); |
| |
| // Bump bucket contents. |
| // _counters[_index] ++; |
| int offs2 = __ load_const_optimized(addr, (address)&BytecodePairHistogram::_counters, R0, true); |
| __ sldi(tmp, tmp, LogBytesPerInt); |
| __ add(addr, tmp, addr); |
| __ lwz(tmp, offs2, addr); |
| __ addi(tmp, tmp, 1); |
| __ stw(tmp, offs2, addr); |
| } |
| |
| void TemplateInterpreterGenerator::trace_bytecode(Template* t) { |
| // Call a little run-time stub to avoid blow-up for each bytecode. |
| // The run-time runtime saves the right registers, depending on |
| // the tosca in-state for the given template. |
| |
| assert(Interpreter::trace_code(t->tos_in()) != NULL, |
| "entry must have been generated"); |
| |
| // Note: we destroy LR here. |
| __ bl(Interpreter::trace_code(t->tos_in())); |
| } |
| |
| void TemplateInterpreterGenerator::stop_interpreter_at() { |
| Label L; |
| int offs1 = __ load_const_optimized(R11_scratch1, (address) &StopInterpreterAt, R0, true); |
| int offs2 = __ load_const_optimized(R12_scratch2, (address) &BytecodeCounter::_counter_value, R0, true); |
| __ ld(R11_scratch1, offs1, R11_scratch1); |
| __ lwa(R12_scratch2, offs2, R12_scratch2); |
| __ cmpd(CCR0, R12_scratch2, R11_scratch1); |
| __ bne(CCR0, L); |
| __ illtrap(); |
| __ bind(L); |
| } |
| |
| #endif // !PRODUCT |