| /* |
| * Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| * |
| */ |
| |
| #ifndef CPU_SPARC_VM_NATIVEINST_SPARC_HPP |
| #define CPU_SPARC_VM_NATIVEINST_SPARC_HPP |
| |
| #include "asm/macroAssembler.hpp" |
| #include "memory/allocation.hpp" |
| #include "runtime/icache.hpp" |
| #include "runtime/os.hpp" |
| #include "utilities/top.hpp" |
| |
| // We have interface for the following instructions: |
| // - NativeInstruction |
| // - - NativeCall |
| // - - NativeFarCall |
| // - - NativeMovConstReg |
| // - - NativeMovConstRegPatching |
| // - - NativeMovRegMem |
| // - - NativeJump |
| // - - NativeGeneralJump |
| // - - NativeIllegalInstruction |
| // The base class for different kinds of native instruction abstractions. |
| // Provides the primitive operations to manipulate code relative to this. |
| class NativeInstruction VALUE_OBJ_CLASS_SPEC { |
| friend class Relocation; |
| |
| public: |
| enum Sparc_specific_constants { |
| nop_instruction_size = 4 |
| }; |
| |
| bool is_nop() { return long_at(0) == nop_instruction(); } |
| bool is_call() { return is_op(long_at(0), Assembler::call_op); } |
| bool is_call_reg() { return is_op(long_at(0), Assembler::arith_op); } |
| bool is_sethi() { return (is_op2(long_at(0), Assembler::sethi_op2) |
| && inv_rd(long_at(0)) != G0); } |
| |
| bool sets_cc() { |
| // conservative (returns true for some instructions that do not set the |
| // the condition code, such as, "save". |
| // Does not return true for the deprecated tagged instructions, such as, TADDcc |
| int x = long_at(0); |
| return (is_op(x, Assembler::arith_op) && |
| (inv_op3(x) & Assembler::cc_bit_op3) == Assembler::cc_bit_op3); |
| } |
| bool is_illegal(); |
| bool is_zombie() { |
| int x = long_at(0); |
| return is_op3(x, |
| Assembler::ldsw_op3, |
| Assembler::ldst_op) |
| && Assembler::inv_rs1(x) == G0 |
| && Assembler::inv_rd(x) == O7; |
| } |
| bool is_ic_miss_trap(); // Inline-cache uses a trap to detect a miss |
| bool is_return() { |
| // is it the output of MacroAssembler::ret or MacroAssembler::retl? |
| int x = long_at(0); |
| const int pc_return_offset = 8; // see frame_sparc.hpp |
| return is_op3(x, Assembler::jmpl_op3, Assembler::arith_op) |
| && (inv_rs1(x) == I7 || inv_rs1(x) == O7) |
| && inv_immed(x) && inv_simm(x, 13) == pc_return_offset |
| && inv_rd(x) == G0; |
| } |
| bool is_int_jump() { |
| // is it the output of MacroAssembler::b? |
| int x = long_at(0); |
| return is_op2(x, Assembler::bp_op2) || is_op2(x, Assembler::br_op2); |
| } |
| bool is_float_jump() { |
| // is it the output of MacroAssembler::fb? |
| int x = long_at(0); |
| return is_op2(x, Assembler::fbp_op2) || is_op2(x, Assembler::fb_op2); |
| } |
| bool is_jump() { |
| return is_int_jump() || is_float_jump(); |
| } |
| bool is_cond_jump() { |
| int x = long_at(0); |
| return (is_int_jump() && Assembler::inv_cond(x) != Assembler::always) || |
| (is_float_jump() && Assembler::inv_cond(x) != Assembler::f_always); |
| } |
| |
| bool is_stack_bang() { |
| int x = long_at(0); |
| return is_op3(x, Assembler::stw_op3, Assembler::ldst_op) && |
| (inv_rd(x) == G0) && (inv_rs1(x) == SP) && (inv_rs2(x) == G3_scratch); |
| } |
| |
| bool is_prefetch() { |
| int x = long_at(0); |
| return is_op3(x, Assembler::prefetch_op3, Assembler::ldst_op); |
| } |
| |
| bool is_membar() { |
| int x = long_at(0); |
| return is_op3(x, Assembler::membar_op3, Assembler::arith_op) && |
| (inv_rd(x) == G0) && (inv_rs1(x) == O7); |
| } |
| |
| bool is_safepoint_poll() { |
| int x = long_at(0); |
| #ifdef _LP64 |
| return is_op3(x, Assembler::ldx_op3, Assembler::ldst_op) && |
| #else |
| return is_op3(x, Assembler::lduw_op3, Assembler::ldst_op) && |
| #endif |
| (inv_rd(x) == G0) && (inv_immed(x) ? Assembler::inv_simm13(x) == 0 : inv_rs2(x) == G0); |
| } |
| |
| bool is_zero_test(Register ®); |
| bool is_load_store_with_small_offset(Register reg); |
| |
| public: |
| #ifdef ASSERT |
| static int rdpc_instruction() { return Assembler::op(Assembler::arith_op ) | Assembler::op3(Assembler::rdreg_op3) | Assembler::u_field(5, 18, 14) | Assembler::rd(O7); } |
| #else |
| // Temporary fix: in optimized mode, u_field is a macro for efficiency reasons (see Assembler::u_field) - needs to be fixed |
| static int rdpc_instruction() { return Assembler::op(Assembler::arith_op ) | Assembler::op3(Assembler::rdreg_op3) | u_field(5, 18, 14) | Assembler::rd(O7); } |
| #endif |
| static int nop_instruction() { return Assembler::op(Assembler::branch_op) | Assembler::op2(Assembler::sethi_op2); } |
| static int illegal_instruction(); // the output of __ breakpoint_trap() |
| static int call_instruction(address destination, address pc) { return Assembler::op(Assembler::call_op) | Assembler::wdisp((intptr_t)destination, (intptr_t)pc, 30); } |
| |
| static int branch_instruction(Assembler::op2s op2val, Assembler::Condition c, bool a) { |
| return Assembler::op(Assembler::branch_op) | Assembler::op2(op2val) | Assembler::annul(a) | Assembler::cond(c); |
| } |
| |
| static int op3_instruction(Assembler::ops opval, Register rd, Assembler::op3s op3val, Register rs1, int simm13a) { |
| return Assembler::op(opval) | Assembler::rd(rd) | Assembler::op3(op3val) | Assembler::rs1(rs1) | Assembler::immed(true) | Assembler::simm(simm13a, 13); |
| } |
| |
| static int sethi_instruction(Register rd, int imm22a) { |
| return Assembler::op(Assembler::branch_op) | Assembler::rd(rd) | Assembler::op2(Assembler::sethi_op2) | Assembler::hi22(imm22a); |
| } |
| |
| protected: |
| address addr_at(int offset) const { return address(this) + offset; } |
| int long_at(int offset) const { return *(int*)addr_at(offset); } |
| void set_long_at(int offset, int i); /* deals with I-cache */ |
| void set_jlong_at(int offset, jlong i); /* deals with I-cache */ |
| void set_addr_at(int offset, address x); /* deals with I-cache */ |
| |
| address instruction_address() const { return addr_at(0); } |
| address next_instruction_address() const { return addr_at(BytesPerInstWord); } |
| |
| static bool is_op( int x, Assembler::ops opval) { |
| return Assembler::inv_op(x) == opval; |
| } |
| static bool is_op2(int x, Assembler::op2s op2val) { |
| return Assembler::inv_op(x) == Assembler::branch_op && Assembler::inv_op2(x) == op2val; |
| } |
| static bool is_op3(int x, Assembler::op3s op3val, Assembler::ops opval) { |
| return Assembler::inv_op(x) == opval && Assembler::inv_op3(x) == op3val; |
| } |
| |
| // utilities to help subclasses decode: |
| static Register inv_rd( int x ) { return Assembler::inv_rd( x); } |
| static Register inv_rs1( int x ) { return Assembler::inv_rs1(x); } |
| static Register inv_rs2( int x ) { return Assembler::inv_rs2(x); } |
| |
| static bool inv_immed( int x ) { return Assembler::inv_immed(x); } |
| static bool inv_annul( int x ) { return (Assembler::annul(true) & x) != 0; } |
| static int inv_cond( int x ) { return Assembler::inv_cond(x); } |
| |
| static int inv_op( int x ) { return Assembler::inv_op( x); } |
| static int inv_op2( int x ) { return Assembler::inv_op2(x); } |
| static int inv_op3( int x ) { return Assembler::inv_op3(x); } |
| |
| static int inv_simm( int x, int nbits ) { return Assembler::inv_simm(x, nbits); } |
| static intptr_t inv_wdisp( int x, int nbits ) { return Assembler::inv_wdisp( x, 0, nbits); } |
| static intptr_t inv_wdisp16( int x ) { return Assembler::inv_wdisp16(x, 0); } |
| static int branch_destination_offset(int x) { return MacroAssembler::branch_destination(x, 0); } |
| static int patch_branch_destination_offset(int dest_offset, int x) { |
| return MacroAssembler::patched_branch(dest_offset, x, 0); |
| } |
| |
| // utility for checking if x is either of 2 small constants |
| static bool is_either(int x, int k1, int k2) { |
| // return x == k1 || x == k2; |
| return (1 << x) & (1 << k1 | 1 << k2); |
| } |
| |
| // utility for checking overflow of signed instruction fields |
| static bool fits_in_simm(int x, int nbits) { |
| // cf. Assembler::assert_signed_range() |
| // return -(1 << nbits-1) <= x && x < ( 1 << nbits-1), |
| return (unsigned)(x + (1 << nbits-1)) < (unsigned)(1 << nbits); |
| } |
| |
| // set a signed immediate field |
| static int set_simm(int insn, int imm, int nbits) { |
| return (insn &~ Assembler::simm(-1, nbits)) | Assembler::simm(imm, nbits); |
| } |
| |
| // set a wdisp field (disp should be the difference of two addresses) |
| static int set_wdisp(int insn, intptr_t disp, int nbits) { |
| return (insn &~ Assembler::wdisp((intptr_t)-4, (intptr_t)0, nbits)) | Assembler::wdisp(disp, 0, nbits); |
| } |
| |
| static int set_wdisp16(int insn, intptr_t disp) { |
| return (insn &~ Assembler::wdisp16((intptr_t)-4, 0)) | Assembler::wdisp16(disp, 0); |
| } |
| |
| // get a simm13 field from an arithmetic or memory instruction |
| static int get_simm13(int insn) { |
| assert(is_either(Assembler::inv_op(insn), |
| Assembler::arith_op, Assembler::ldst_op) && |
| (insn & Assembler::immed(true)), "must have a simm13 field"); |
| return Assembler::inv_simm(insn, 13); |
| } |
| |
| // set the simm13 field of an arithmetic or memory instruction |
| static bool set_simm13(int insn, int imm) { |
| get_simm13(insn); // tickle the assertion check |
| return set_simm(insn, imm, 13); |
| } |
| |
| // combine the fields of a sethi stream (7 instructions ) and an add, jmp or ld/st |
| static intptr_t data64( address pc, int arith_insn ) { |
| assert(is_op2(*(unsigned int *)pc, Assembler::sethi_op2), "must be sethi"); |
| intptr_t hi = (intptr_t)gethi( (unsigned int *)pc ); |
| intptr_t lo = (intptr_t)get_simm13(arith_insn); |
| assert((unsigned)lo < (1 << 10), "offset field of set_metadata must be 10 bits"); |
| return hi | lo; |
| } |
| |
| // Regenerate the instruction sequence that performs the 64 bit |
| // sethi. This only does the sethi. The disp field (bottom 10 bits) |
| // must be handled separately. |
| static void set_data64_sethi(address instaddr, intptr_t x); |
| static void verify_data64_sethi(address instaddr, intptr_t x); |
| |
| // combine the fields of a sethi/simm13 pair (simm13 = or, add, jmpl, ld/st) |
| static int data32(int sethi_insn, int arith_insn) { |
| assert(is_op2(sethi_insn, Assembler::sethi_op2), "must be sethi"); |
| int hi = Assembler::inv_hi22(sethi_insn); |
| int lo = get_simm13(arith_insn); |
| assert((unsigned)lo < (1 << 10), "offset field of set_metadata must be 10 bits"); |
| return hi | lo; |
| } |
| |
| static int set_data32_sethi(int sethi_insn, int imm) { |
| // note that Assembler::hi22 clips the low 10 bits for us |
| assert(is_op2(sethi_insn, Assembler::sethi_op2), "must be sethi"); |
| return (sethi_insn &~ Assembler::hi22(-1)) | Assembler::hi22(imm); |
| } |
| |
| static int set_data32_simm13(int arith_insn, int imm) { |
| get_simm13(arith_insn); // tickle the assertion check |
| int imm10 = Assembler::low10(imm); |
| return (arith_insn &~ Assembler::simm(-1, 13)) | Assembler::simm(imm10, 13); |
| } |
| |
| static int low10(int imm) { |
| return Assembler::low10(imm); |
| } |
| |
| // Perform the inverse of the LP64 Macroassembler::sethi |
| // routine. Extracts the 54 bits of address from the instruction |
| // stream. This routine must agree with the sethi routine in |
| // assembler_inline_sparc.hpp |
| static address gethi( unsigned int *pc ) { |
| int i = 0; |
| uintptr_t adr; |
| // We first start out with the real sethi instruction |
| assert(is_op2(*pc, Assembler::sethi_op2), "in gethi - must be sethi"); |
| adr = (unsigned int)Assembler::inv_hi22( *(pc++) ); |
| i++; |
| while ( i < 7 ) { |
| // We're done if we hit a nop |
| if ( (int)*pc == nop_instruction() ) break; |
| assert ( Assembler::inv_op(*pc) == Assembler::arith_op, "in gethi - must be arith_op" ); |
| switch ( Assembler::inv_op3(*pc) ) { |
| case Assembler::xor_op3: |
| adr ^= (intptr_t)get_simm13( *pc ); |
| return ( (address)adr ); |
| break; |
| case Assembler::sll_op3: |
| adr <<= ( *pc & 0x3f ); |
| break; |
| case Assembler::or_op3: |
| adr |= (intptr_t)get_simm13( *pc ); |
| break; |
| default: |
| assert ( 0, "in gethi - Should not reach here" ); |
| break; |
| } |
| pc++; |
| i++; |
| } |
| return ( (address)adr ); |
| } |
| |
| public: |
| void verify(); |
| void print(); |
| |
| // unit test stuff |
| static void test() {} // override for testing |
| |
| inline friend NativeInstruction* nativeInstruction_at(address address); |
| }; |
| |
| inline NativeInstruction* nativeInstruction_at(address address) { |
| NativeInstruction* inst = (NativeInstruction*)address; |
| #ifdef ASSERT |
| inst->verify(); |
| #endif |
| return inst; |
| } |
| |
| |
| |
| //----------------------------------------------------------------------------- |
| |
| // The NativeCall is an abstraction for accessing/manipulating native call imm32 instructions. |
| // (used to manipulate inline caches, primitive & dll calls, etc.) |
| inline NativeCall* nativeCall_at(address instr); |
| inline NativeCall* nativeCall_overwriting_at(address instr, |
| address destination); |
| inline NativeCall* nativeCall_before(address return_address); |
| class NativeCall: public NativeInstruction { |
| public: |
| enum Sparc_specific_constants { |
| instruction_size = 8, |
| return_address_offset = 8, |
| call_displacement_width = 30, |
| displacement_offset = 0, |
| instruction_offset = 0 |
| }; |
| address instruction_address() const { return addr_at(0); } |
| address next_instruction_address() const { return addr_at(instruction_size); } |
| address return_address() const { return addr_at(return_address_offset); } |
| |
| address destination() const { return inv_wdisp(long_at(0), call_displacement_width) + instruction_address(); } |
| address displacement_address() const { return addr_at(displacement_offset); } |
| void set_destination(address dest) { set_long_at(0, set_wdisp(long_at(0), dest - instruction_address(), call_displacement_width)); } |
| void set_destination_mt_safe(address dest); |
| |
| void verify_alignment() {} // do nothing on sparc |
| void verify(); |
| void print(); |
| |
| // unit test stuff |
| static void test(); |
| |
| // Creation |
| friend inline NativeCall* nativeCall_at(address instr); |
| friend NativeCall* nativeCall_overwriting_at(address instr, address destination = NULL) { |
| // insert a "blank" call: |
| NativeCall* call = (NativeCall*)instr; |
| call->set_long_at(0 * BytesPerInstWord, call_instruction(destination, instr)); |
| call->set_long_at(1 * BytesPerInstWord, nop_instruction()); |
| assert(call->addr_at(2 * BytesPerInstWord) - instr == instruction_size, "instruction size"); |
| // check its structure now: |
| assert(nativeCall_at(instr)->destination() == destination, "correct call destination"); |
| return call; |
| } |
| |
| friend inline NativeCall* nativeCall_before(address return_address) { |
| NativeCall* call = (NativeCall*)(return_address - return_address_offset); |
| #ifdef ASSERT |
| call->verify(); |
| #endif |
| return call; |
| } |
| |
| static bool is_call_at(address instr) { |
| return nativeInstruction_at(instr)->is_call(); |
| } |
| |
| static bool is_call_before(address instr) { |
| return nativeInstruction_at(instr - return_address_offset)->is_call(); |
| } |
| |
| static bool is_call_to(address instr, address target) { |
| return nativeInstruction_at(instr)->is_call() && |
| nativeCall_at(instr)->destination() == target; |
| } |
| |
| // MT-safe patching of a call instruction. |
| static void insert(address code_pos, address entry) { |
| (void)nativeCall_overwriting_at(code_pos, entry); |
| } |
| |
| static void replace_mt_safe(address instr_addr, address code_buffer); |
| }; |
| inline NativeCall* nativeCall_at(address instr) { |
| NativeCall* call = (NativeCall*)instr; |
| #ifdef ASSERT |
| call->verify(); |
| #endif |
| return call; |
| } |
| |
| class NativeCallReg: public NativeInstruction { |
| public: |
| enum Sparc_specific_constants { |
| instruction_size = 8, |
| return_address_offset = 8, |
| instruction_offset = 0 |
| }; |
| |
| address next_instruction_address() const { |
| return addr_at(instruction_size); |
| } |
| }; |
| |
| // The NativeFarCall is an abstraction for accessing/manipulating native call-anywhere |
| // instructions in the sparcv9 vm. Used to call native methods which may be loaded |
| // anywhere in the address space, possibly out of reach of a call instruction. |
| |
| #ifndef _LP64 |
| |
| // On 32-bit systems, a far call is the same as a near one. |
| class NativeFarCall; |
| inline NativeFarCall* nativeFarCall_at(address instr); |
| class NativeFarCall : public NativeCall { |
| public: |
| friend inline NativeFarCall* nativeFarCall_at(address instr) { return (NativeFarCall*)nativeCall_at(instr); } |
| friend NativeFarCall* nativeFarCall_overwriting_at(address instr, address destination = NULL) |
| { return (NativeFarCall*)nativeCall_overwriting_at(instr, destination); } |
| friend NativeFarCall* nativeFarCall_before(address return_address) |
| { return (NativeFarCall*)nativeCall_before(return_address); } |
| }; |
| |
| #else |
| |
| // The format of this extended-range call is: |
| // jumpl_to addr, lreg |
| // == sethi %hi54(addr), O7 ; jumpl O7, %lo10(addr), O7 ; <delay> |
| // That is, it is essentially the same as a NativeJump. |
| class NativeFarCall; |
| inline NativeFarCall* nativeFarCall_overwriting_at(address instr, address destination); |
| inline NativeFarCall* nativeFarCall_at(address instr); |
| class NativeFarCall: public NativeInstruction { |
| public: |
| enum Sparc_specific_constants { |
| // instruction_size includes the delay slot instruction. |
| instruction_size = 9 * BytesPerInstWord, |
| return_address_offset = 9 * BytesPerInstWord, |
| jmpl_offset = 7 * BytesPerInstWord, |
| displacement_offset = 0, |
| instruction_offset = 0 |
| }; |
| address instruction_address() const { return addr_at(0); } |
| address next_instruction_address() const { return addr_at(instruction_size); } |
| address return_address() const { return addr_at(return_address_offset); } |
| |
| address destination() const { |
| return (address) data64(addr_at(0), long_at(jmpl_offset)); |
| } |
| address displacement_address() const { return addr_at(displacement_offset); } |
| void set_destination(address dest); |
| |
| bool destination_is_compiled_verified_entry_point(); |
| |
| void verify(); |
| void print(); |
| |
| // unit test stuff |
| static void test(); |
| |
| // Creation |
| friend inline NativeFarCall* nativeFarCall_at(address instr) { |
| NativeFarCall* call = (NativeFarCall*)instr; |
| #ifdef ASSERT |
| call->verify(); |
| #endif |
| return call; |
| } |
| |
| friend inline NativeFarCall* nativeFarCall_overwriting_at(address instr, address destination = NULL) { |
| Unimplemented(); |
| NativeFarCall* call = (NativeFarCall*)instr; |
| return call; |
| } |
| |
| friend NativeFarCall* nativeFarCall_before(address return_address) { |
| NativeFarCall* call = (NativeFarCall*)(return_address - return_address_offset); |
| #ifdef ASSERT |
| call->verify(); |
| #endif |
| return call; |
| } |
| |
| static bool is_call_at(address instr); |
| |
| // MT-safe patching of a call instruction. |
| static void insert(address code_pos, address entry) { |
| (void)nativeFarCall_overwriting_at(code_pos, entry); |
| } |
| static void replace_mt_safe(address instr_addr, address code_buffer); |
| }; |
| |
| #endif // _LP64 |
| |
| // An interface for accessing/manipulating 32 bit native set_metadata imm, reg instructions |
| // (used to manipulate inlined data references, etc.) |
| // set_metadata imm, reg |
| // == sethi %hi22(imm), reg ; add reg, %lo10(imm), reg |
| class NativeMovConstReg32; |
| inline NativeMovConstReg32* nativeMovConstReg32_at(address address); |
| class NativeMovConstReg32: public NativeInstruction { |
| public: |
| enum Sparc_specific_constants { |
| sethi_offset = 0, |
| add_offset = 4, |
| instruction_size = 8 |
| }; |
| |
| address instruction_address() const { return addr_at(0); } |
| address next_instruction_address() const { return addr_at(instruction_size); } |
| |
| // (The [set_]data accessor respects oop_type relocs also.) |
| intptr_t data() const; |
| void set_data(intptr_t x); |
| |
| // report the destination register |
| Register destination() { return inv_rd(long_at(sethi_offset)); } |
| |
| void verify(); |
| void print(); |
| |
| // unit test stuff |
| static void test(); |
| |
| // Creation |
| friend inline NativeMovConstReg32* nativeMovConstReg32_at(address address) { |
| NativeMovConstReg32* test = (NativeMovConstReg32*)address; |
| #ifdef ASSERT |
| test->verify(); |
| #endif |
| return test; |
| } |
| }; |
| |
| // An interface for accessing/manipulating native set_metadata imm, reg instructions. |
| // (used to manipulate inlined data references, etc.) |
| // set_metadata imm, reg |
| // == sethi %hi22(imm), reg ; add reg, %lo10(imm), reg |
| class NativeMovConstReg; |
| inline NativeMovConstReg* nativeMovConstReg_at(address address); |
| class NativeMovConstReg: public NativeInstruction { |
| public: |
| enum Sparc_specific_constants { |
| sethi_offset = 0, |
| #ifdef _LP64 |
| add_offset = 7 * BytesPerInstWord, |
| instruction_size = 8 * BytesPerInstWord |
| #else |
| add_offset = 4, |
| instruction_size = 8 |
| #endif |
| }; |
| |
| address instruction_address() const { return addr_at(0); } |
| address next_instruction_address() const { return addr_at(instruction_size); } |
| |
| // (The [set_]data accessor respects oop_type relocs also.) |
| intptr_t data() const; |
| void set_data(intptr_t x); |
| |
| // report the destination register |
| Register destination() { return inv_rd(long_at(sethi_offset)); } |
| |
| void verify(); |
| void print(); |
| |
| // unit test stuff |
| static void test(); |
| |
| // Creation |
| friend inline NativeMovConstReg* nativeMovConstReg_at(address address) { |
| NativeMovConstReg* test = (NativeMovConstReg*)address; |
| #ifdef ASSERT |
| test->verify(); |
| #endif |
| return test; |
| } |
| |
| |
| friend NativeMovConstReg* nativeMovConstReg_before(address address) { |
| NativeMovConstReg* test = (NativeMovConstReg*)(address - instruction_size); |
| #ifdef ASSERT |
| test->verify(); |
| #endif |
| return test; |
| } |
| |
| }; |
| |
| |
| // An interface for accessing/manipulating native set_metadata imm, reg instructions. |
| // (used to manipulate inlined data references, etc.) |
| // set_metadata imm, reg |
| // == sethi %hi22(imm), reg; nop; add reg, %lo10(imm), reg |
| // |
| // Note that it is identical to NativeMovConstReg with the exception of a nop between the |
| // sethi and the add. The nop is required to be in the delay slot of the call instruction |
| // which overwrites the sethi during patching. |
| class NativeMovConstRegPatching; |
| inline NativeMovConstRegPatching* nativeMovConstRegPatching_at(address address);class NativeMovConstRegPatching: public NativeInstruction { |
| public: |
| enum Sparc_specific_constants { |
| sethi_offset = 0, |
| #ifdef _LP64 |
| nop_offset = 7 * BytesPerInstWord, |
| #else |
| nop_offset = sethi_offset + BytesPerInstWord, |
| #endif |
| add_offset = nop_offset + BytesPerInstWord, |
| instruction_size = add_offset + BytesPerInstWord |
| }; |
| |
| address instruction_address() const { return addr_at(0); } |
| address next_instruction_address() const { return addr_at(instruction_size); } |
| |
| // (The [set_]data accessor respects oop_type relocs also.) |
| int data() const; |
| void set_data(int x); |
| |
| // report the destination register |
| Register destination() { return inv_rd(long_at(sethi_offset)); } |
| |
| void verify(); |
| void print(); |
| |
| // unit test stuff |
| static void test(); |
| |
| // Creation |
| friend inline NativeMovConstRegPatching* nativeMovConstRegPatching_at(address address) { |
| NativeMovConstRegPatching* test = (NativeMovConstRegPatching*)address; |
| #ifdef ASSERT |
| test->verify(); |
| #endif |
| return test; |
| } |
| |
| |
| friend NativeMovConstRegPatching* nativeMovConstRegPatching_before(address address) { |
| NativeMovConstRegPatching* test = (NativeMovConstRegPatching*)(address - instruction_size); |
| #ifdef ASSERT |
| test->verify(); |
| #endif |
| return test; |
| } |
| |
| }; |
| |
| |
| // An interface for accessing/manipulating native memory ops |
| // ld* [reg + offset], reg |
| // st* reg, [reg + offset] |
| // sethi %hi(imm), reg; add reg, %lo(imm), reg; ld* [reg1 + reg], reg2 |
| // sethi %hi(imm), reg; add reg, %lo(imm), reg; st* reg2, [reg1 + reg] |
| // Ops covered: {lds,ldu,st}{w,b,h}, {ld,st}{d,x} |
| // |
| class NativeMovRegMem; |
| inline NativeMovRegMem* nativeMovRegMem_at (address address); |
| class NativeMovRegMem: public NativeInstruction { |
| public: |
| enum Sparc_specific_constants { |
| op3_mask_ld = 1 << Assembler::lduw_op3 | |
| 1 << Assembler::ldub_op3 | |
| 1 << Assembler::lduh_op3 | |
| 1 << Assembler::ldd_op3 | |
| 1 << Assembler::ldsw_op3 | |
| 1 << Assembler::ldsb_op3 | |
| 1 << Assembler::ldsh_op3 | |
| 1 << Assembler::ldx_op3, |
| op3_mask_st = 1 << Assembler::stw_op3 | |
| 1 << Assembler::stb_op3 | |
| 1 << Assembler::sth_op3 | |
| 1 << Assembler::std_op3 | |
| 1 << Assembler::stx_op3, |
| op3_ldst_int_limit = Assembler::ldf_op3, |
| op3_mask_ldf = 1 << (Assembler::ldf_op3 - op3_ldst_int_limit) | |
| 1 << (Assembler::lddf_op3 - op3_ldst_int_limit), |
| op3_mask_stf = 1 << (Assembler::stf_op3 - op3_ldst_int_limit) | |
| 1 << (Assembler::stdf_op3 - op3_ldst_int_limit), |
| |
| offset_width = 13, |
| sethi_offset = 0, |
| #ifdef _LP64 |
| add_offset = 7 * BytesPerInstWord, |
| #else |
| add_offset = 4, |
| #endif |
| ldst_offset = add_offset + BytesPerInstWord |
| }; |
| bool is_immediate() const { |
| // check if instruction is ld* [reg + offset], reg or st* reg, [reg + offset] |
| int i0 = long_at(0); |
| return (is_op(i0, Assembler::ldst_op)); |
| } |
| |
| address instruction_address() const { return addr_at(0); } |
| address next_instruction_address() const { |
| #ifdef _LP64 |
| return addr_at(is_immediate() ? 4 : (7 * BytesPerInstWord)); |
| #else |
| return addr_at(is_immediate() ? 4 : 12); |
| #endif |
| } |
| intptr_t offset() const { |
| return is_immediate()? inv_simm(long_at(0), offset_width) : |
| nativeMovConstReg_at(addr_at(0))->data(); |
| } |
| void set_offset(intptr_t x) { |
| if (is_immediate()) { |
| guarantee(fits_in_simm(x, offset_width), "data block offset overflow"); |
| set_long_at(0, set_simm(long_at(0), x, offset_width)); |
| } else |
| nativeMovConstReg_at(addr_at(0))->set_data(x); |
| } |
| |
| void add_offset_in_bytes(intptr_t radd_offset) { |
| set_offset (offset() + radd_offset); |
| } |
| |
| void copy_instruction_to(address new_instruction_address); |
| |
| void verify(); |
| void print (); |
| |
| // unit test stuff |
| static void test(); |
| |
| private: |
| friend inline NativeMovRegMem* nativeMovRegMem_at (address address) { |
| NativeMovRegMem* test = (NativeMovRegMem*)address; |
| #ifdef ASSERT |
| test->verify(); |
| #endif |
| return test; |
| } |
| }; |
| |
| |
| // An interface for accessing/manipulating native jumps |
| // jump_to addr |
| // == sethi %hi22(addr), temp ; jumpl reg, %lo10(addr), G0 ; <delay> |
| // jumpl_to addr, lreg |
| // == sethi %hi22(addr), temp ; jumpl reg, %lo10(addr), lreg ; <delay> |
| class NativeJump; |
| inline NativeJump* nativeJump_at(address address); |
| class NativeJump: public NativeInstruction { |
| private: |
| void guarantee_displacement(int disp, int width) { |
| guarantee(fits_in_simm(disp, width + 2), "branch displacement overflow"); |
| } |
| |
| public: |
| enum Sparc_specific_constants { |
| sethi_offset = 0, |
| #ifdef _LP64 |
| jmpl_offset = 7 * BytesPerInstWord, |
| instruction_size = 9 * BytesPerInstWord // includes delay slot |
| #else |
| jmpl_offset = 1 * BytesPerInstWord, |
| instruction_size = 3 * BytesPerInstWord // includes delay slot |
| #endif |
| }; |
| |
| address instruction_address() const { return addr_at(0); } |
| address next_instruction_address() const { return addr_at(instruction_size); } |
| |
| #ifdef _LP64 |
| address jump_destination() const { |
| return (address) data64(instruction_address(), long_at(jmpl_offset)); |
| } |
| void set_jump_destination(address dest) { |
| set_data64_sethi( instruction_address(), (intptr_t)dest); |
| set_long_at(jmpl_offset, set_data32_simm13( long_at(jmpl_offset), (intptr_t)dest)); |
| } |
| #else |
| address jump_destination() const { |
| return (address) data32(long_at(sethi_offset), long_at(jmpl_offset)); |
| } |
| void set_jump_destination(address dest) { |
| set_long_at(sethi_offset, set_data32_sethi( long_at(sethi_offset), (intptr_t)dest)); |
| set_long_at(jmpl_offset, set_data32_simm13( long_at(jmpl_offset), (intptr_t)dest)); |
| } |
| #endif |
| |
| // Creation |
| friend inline NativeJump* nativeJump_at(address address) { |
| NativeJump* jump = (NativeJump*)address; |
| #ifdef ASSERT |
| jump->verify(); |
| #endif |
| return jump; |
| } |
| |
| void verify(); |
| void print(); |
| |
| // Unit testing stuff |
| static void test(); |
| |
| // Insertion of native jump instruction |
| static void insert(address code_pos, address entry); |
| // MT-safe insertion of native jump at verified method entry |
| static void check_verified_entry_alignment(address entry, address verified_entry) { |
| // nothing to do for sparc. |
| } |
| static void patch_verified_entry(address entry, address verified_entry, address dest); |
| }; |
| |
| |
| |
| // Despite the name, handles only simple branches. |
| class NativeGeneralJump; |
| inline NativeGeneralJump* nativeGeneralJump_at(address address); |
| class NativeGeneralJump: public NativeInstruction { |
| public: |
| enum Sparc_specific_constants { |
| instruction_size = 8 |
| }; |
| |
| address instruction_address() const { return addr_at(0); } |
| address jump_destination() const { return addr_at(0) + branch_destination_offset(long_at(0)); } |
| void set_jump_destination(address dest) { |
| int patched_instr = patch_branch_destination_offset(dest - addr_at(0), long_at(0)); |
| set_long_at(0, patched_instr); |
| } |
| NativeInstruction *delay_slot_instr() { return nativeInstruction_at(addr_at(4));} |
| void fill_delay_slot(int instr) { set_long_at(4, instr);} |
| Assembler::Condition condition() { |
| int x = long_at(0); |
| return (Assembler::Condition) Assembler::inv_cond(x); |
| } |
| |
| // Creation |
| friend inline NativeGeneralJump* nativeGeneralJump_at(address address) { |
| NativeGeneralJump* jump = (NativeGeneralJump*)(address); |
| #ifdef ASSERT |
| jump->verify(); |
| #endif |
| return jump; |
| } |
| |
| // Insertion of native general jump instruction |
| static void insert_unconditional(address code_pos, address entry); |
| static void replace_mt_safe(address instr_addr, address code_buffer); |
| |
| void verify(); |
| }; |
| |
| |
| class NativeIllegalInstruction: public NativeInstruction { |
| public: |
| enum Sparc_specific_constants { |
| instruction_size = 4 |
| }; |
| |
| // Insert illegal opcode as specific address |
| static void insert(address code_pos); |
| }; |
| |
| #endif // CPU_SPARC_VM_NATIVEINST_SPARC_HPP |