| # |
| # Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved. |
| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| # |
| # This code is free software; you can redistribute it and/or modify it |
| # under the terms of the GNU General Public License version 2 only, as |
| # published by the Free Software Foundation. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the LICENSE file that accompanied this code. |
| # |
| # This code is distributed in the hope that it will be useful, but WITHOUT |
| # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| # version 2 for more details (a copy is included in the LICENSE file that |
| # accompanied this code). |
| # |
| # You should have received a copy of the GNU General Public License version |
| # 2 along with this work; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| # |
| # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| # or visit www.oracle.com if you need additional information or have any |
| # questions. |
| # |
| |
| ################################################################################ |
| # This file contains helper functions for Init.gmk. |
| # It is divided in two parts, depending on if a SPEC is present or not |
| # (HAS_SPEC is true or not). |
| ################################################################################ |
| |
| ifndef _INITSUPPORT_GMK |
| _INITSUPPORT_GMK := 1 |
| |
| ifeq ($(HAS_SPEC),) |
| |
| # Include the corresponding closed file, if present. |
| ifneq ($(CUSTOM_MAKE_DIR), ) |
| -include $(CUSTOM_MAKE_DIR)/InitSupport.gmk |
| endif |
| |
| ############################################################################## |
| # Helper functions for the initial part of Init.gmk, before the spec file is |
| # loaded. Most of these functions provide parsing and setting up make options |
| # from the command-line. |
| ############################################################################## |
| |
| # Make control variables, handled by Init.gmk |
| INIT_CONTROL_VARIABLES += LOG CONF CONF_NAME SPEC JOBS TEST_JOBS CONF_CHECK \ |
| COMPARE_BUILD JTREG GTEST TEST_OPTS TEST_VM_OPTS |
| |
| # All known make control variables |
| MAKE_CONTROL_VARIABLES := $(INIT_CONTROL_VARIABLES) TEST JDK_FILTER |
| |
| # Define a simple reverse function. |
| # Should maybe move to MakeBase.gmk, but we can't include that file now. |
| reverse = \ |
| $(if $(strip $(1)), $(call reverse, $(wordlist 2, $(words $(1)), $(1)))) \ |
| $(firstword $(1)) |
| |
| # The variable MAKEOVERRIDES contains variable assignments from the command |
| # line, but in reverse order to what the user entered. |
| # The '\#' <=> '\ 'dance is needed to keep values with space in them connected. |
| COMMAND_LINE_VARIABLES := $(subst \#,\ , $(call reverse, $(subst \ ,\#,$(MAKEOVERRIDES)))) |
| |
| # A list like FOO="val1" BAR="val2" containing all user-supplied make |
| # variables that we should propagate. |
| # The '\#' <=> '\ 'dance is needed to keep values with space in them connected. |
| USER_MAKE_VARS := $(subst \#,\ , $(filter-out $(addsuffix =%, $(INIT_CONTROL_VARIABLES)), \ |
| $(subst \ ,\#,$(MAKEOVERRIDES)))) |
| |
| # Setup information about available configurations, if any. |
| ifneq ($(CUSTOM_ROOT), ) |
| build_dir=$(CUSTOM_ROOT)/build |
| else |
| build_dir=$(topdir)/build |
| endif |
| all_spec_files=$(wildcard $(build_dir)/*/spec.gmk) |
| # Extract the configuration names from the path |
| all_confs=$(patsubst %/spec.gmk, %, $(patsubst $(build_dir)/%, %, $(all_spec_files))) |
| |
| # Check for unknown command-line variables |
| define CheckControlVariables |
| command_line_variables := $$(strip $$(foreach var, \ |
| $$(subst \ ,_,$$(MAKEOVERRIDES)), \ |
| $$(firstword $$(subst =, , $$(var))))) |
| unknown_command_line_variables := $$(strip \ |
| $$(filter-out $$(MAKE_CONTROL_VARIABLES), $$(command_line_variables))) |
| ifneq ($$(unknown_command_line_variables), ) |
| $$(info Note: Command line contains non-control variables:) |
| $$(foreach var, $$(unknown_command_line_variables), $$(info * $$(var)=$$($$(var)))) |
| $$(info Make sure it is not mistyped, and that you intend to override this variable.) |
| $$(info 'make help' will list known control variables.) |
| $$(info ) |
| endif |
| endef |
| |
| # Check for deprecated ALT_ variables |
| define CheckDeprecatedEnvironment |
| defined_alt_variables := $$(filter ALT_%, $$(.VARIABLES)) |
| ifneq ($$(defined_alt_variables), ) |
| $$(info Warning: You have the following ALT_ variables set:) |
| $$(foreach var, $$(defined_alt_variables), $$(info * $$(var)=$$($$(var)))) |
| $$(info ALT_ variables are deprecated, and may result in a failed build.) |
| $$(info Please clean your environment.) |
| $$(info ) |
| endif |
| endef |
| |
| # Check for invalid make flags like -j |
| define CheckInvalidMakeFlags |
| # This is a trick to get this rule to execute before any other rules |
| # MAKEFLAGS only indicate -j if read in a recipe (!) |
| $$(topdir)/make/Init.gmk: .FORCE |
| $$(if $$(findstring --jobserver, $$(MAKEFLAGS)), \ |
| $$(info Error: 'make -jN' is not supported, use 'make JOBS=N') \ |
| $$(error Cannot continue) \ |
| ) |
| .FORCE: |
| .PHONY: .FORCE |
| endef |
| |
| # Check that the CONF_CHECK option is valid and set up handling |
| define ParseConfCheckOption |
| ifeq ($$(CONF_CHECK), ) |
| # Default behavior is fail |
| CONF_CHECK := fail |
| else ifneq ($$(filter-out auto fail ignore, $$(CONF_CHECK)),) |
| $$(info Error: CONF_CHECK must be one of: auto, fail or ignore.) |
| $$(error Cannot continue) |
| endif |
| endef |
| |
| # Look for a given option in the LOG variable, and if found, set a variable |
| # and remove the option from the LOG variable |
| # $1: The option to look for |
| # $2: The option to set to "true" if the option is found |
| define ParseLogOption |
| ifneq ($$(findstring $1, $$(LOG)),) |
| $2 := true |
| # COMMA is defined in spec.gmk, but that is not included yet |
| COMMA := , |
| # First try to remove ",<option>" if it exists, otherwise just remove "<option>" |
| LOG_STRIPPED := $$(subst $1,, $$(subst $$(COMMA)$(strip $1),, $$(LOG))) |
| # We might have ended up with a leading comma. Remove it. Need override |
| # since LOG is set from the command line. |
| override LOG := $$(strip $$(patsubst $$(COMMA)%, %, $$(LOG_STRIPPED))) |
| endif |
| endef |
| |
| define ParseLogLevel |
| # Catch old-style VERBOSE= command lines. |
| ifneq ($$(origin VERBOSE), undefined) |
| $$(info Error: VERBOSE is deprecated. Use LOG=<warn|info|debug|trace> instead.) |
| $$(error Cannot continue) |
| endif |
| |
| # Setup logging according to LOG |
| |
| # If the "nofile" argument is given, act on it and strip it away |
| $$(eval $$(call ParseLogOption, nofile, LOG_NOFILE)) |
| |
| # If the "cmdline" argument is given, act on it and strip it away |
| $$(eval $$(call ParseLogOption, cmdlines, LOG_CMDLINES)) |
| |
| # If the "profile-to-log" argument is given, write shell times in build log |
| $$(eval $$(call ParseLogOption, profile-to-log, LOG_PROFILE_TIMES_LOG)) |
| |
| # If the "profile" argument is given, write shell times in separate log file |
| # IMPORTANT: $(ParseLogOption profile-to-log) should go first. Otherwise |
| # parsing of 'LOG=debug,profile-to-log,nofile' ends up in the following error: |
| # Error: LOG contains unknown option or log level: debug-to-log. |
| $$(eval $$(call ParseLogOption, profile, LOG_PROFILE_TIMES_FILE)) |
| |
| # Treat LOG=profile-to-log as if it were LOG=profile,profile-to-log |
| LOG_PROFILE_TIMES_FILE := $$(firstword $$(LOG_PROFILE_TIMES_FILE) $$(LOG_PROFILE_TIMES_LOG)) |
| |
| LOG_LEVEL := $$(LOG) |
| |
| ifeq ($$(LOG_LEVEL),) |
| # Set LOG to "warn" as default if not set |
| LOG_LEVEL := warn |
| endif |
| |
| ifeq ($$(LOG_LEVEL), warn) |
| MAKE_LOG_FLAGS := -s |
| else ifeq ($$(LOG_LEVEL), info) |
| MAKE_LOG_FLAGS := -s |
| else ifeq ($$(LOG_LEVEL), debug) |
| MAKE_LOG_FLAGS := |
| else ifeq ($$(LOG_LEVEL), trace) |
| MAKE_LOG_FLAGS := |
| else |
| $$(info Error: LOG contains unknown option or log level: $$(LOG).) |
| $$(info LOG can be <level>[,<opt>[...]] where <opt> is nofile | cmdlines | profile | profile-to-log) |
| $$(info and <level> is warn | info | debug | trace) |
| $$(error Cannot continue) |
| endif |
| endef |
| |
| define ParseConfAndSpec |
| ifneq ($$(origin SPEC), undefined) |
| # We have been given a SPEC, check that it works out properly |
| ifneq ($$(origin CONF), undefined) |
| # We also have a CONF argument. We can't have both. |
| $$(info Error: Cannot use CONF=$$(CONF) and SPEC=$$(SPEC) at the same time. Choose one.) |
| $$(error Cannot continue) |
| endif |
| ifneq ($$(origin CONF_NAME), undefined) |
| # We also have a CONF_NAME argument. We can't have both. |
| $$(info Error: Cannot use CONF_NAME=$$(CONF_NAME) and SPEC=$$(SPEC) at the same time. Choose one.) |
| $$(error Cannot continue) |
| endif |
| ifeq ($$(wildcard $$(SPEC)),) |
| $$(info Error: Cannot locate spec.gmk, given by SPEC=$$(SPEC).) |
| $$(error Cannot continue) |
| endif |
| ifeq ($$(filter /%, $$(SPEC)),) |
| # If given with relative path, make it absolute |
| SPECS := $$(CURDIR)/$$(strip $$(SPEC)) |
| else |
| SPECS := $$(SPEC) |
| endif |
| |
| # For now, unset this SPEC variable. |
| override SPEC := |
| else |
| # Use spec.gmk files in the build output directory |
| ifeq ($$(all_spec_files),) |
| ifneq ($(CUSTOM_ROOT), ) |
| $$(info Error: No configurations found for $$(CUSTOM_ROOT).) |
| else |
| $$(info Error: No configurations found for $$(topdir).) |
| endif |
| $$(info Please run 'bash configure' to create a configuration.) |
| $$(info ) |
| $$(error Cannot continue) |
| endif |
| |
| ifneq ($$(origin CONF_NAME), undefined) |
| ifneq ($$(origin CONF), undefined) |
| # We also have a CONF argument. We can't have both. |
| $$(info Error: Cannot use CONF=$$(CONF) and CONF_NAME=$$(CONF_NAME) at the same time. Choose one.) |
| $$(error Cannot continue) |
| endif |
| matching_conf := $$(strip $$(filter $$(CONF_NAME), $$(all_confs))) |
| ifeq ($$(matching_conf),) |
| $$(info Error: No configurations found matching CONF_NAME=$$(CONF_NAME).) |
| $$(info Available configurations in $$(build_dir):) |
| $$(foreach var, $$(all_confs), $$(info * $$(var))) |
| $$(error Cannot continue) |
| else ifneq ($$(words $$(matching_conf)), 1) |
| $$(info Error: Matching more than one configuration CONF_NAME=$$(CONF_NAME).) |
| $$(info Available configurations in $$(build_dir):) |
| $$(foreach var, $$(all_confs), $$(info * $$(var))) |
| $$(error Cannot continue) |
| else |
| $$(info Building configuration '$$(matching_conf)' (matching CONF_NAME=$$(CONF_NAME))) |
| endif |
| # Create a SPEC definition. This will contain the path to exactly one spec file. |
| SPECS := $$(build_dir)/$$(matching_conf)/spec.gmk |
| else ifneq ($$(origin CONF), undefined) |
| # User have given a CONF= argument. |
| ifeq ($$(CONF),) |
| # If given CONF=, match all configurations |
| matching_confs := $$(strip $$(all_confs)) |
| else |
| # Otherwise select those that contain the given CONF string |
| matching_confs := $$(strip $$(foreach var, $$(all_confs), \ |
| $$(if $$(findstring $$(CONF), $$(var)), $$(var)))) |
| endif |
| ifeq ($$(matching_confs),) |
| $$(info Error: No configurations found matching CONF=$$(CONF).) |
| $$(info Available configurations in $$(build_dir):) |
| $$(foreach var, $$(all_confs), $$(info * $$(var))) |
| $$(error Cannot continue) |
| else |
| # Don't repeat this output on make restarts caused by including |
| # generated files. |
| ifeq ($$(MAKE_RESTARTS),) |
| ifeq ($$(words $$(matching_confs)), 1) |
| ifneq ($$(findstring $$(LOG_LEVEL), info debug trace),) |
| $$(info Building configuration '$$(matching_confs)' (matching CONF=$$(CONF))) |
| endif |
| else |
| $$(info Building these configurations (matching CONF=$$(CONF)):) |
| $$(foreach var, $$(matching_confs), $$(info * $$(var))) |
| endif |
| endif |
| endif |
| |
| # Create a SPEC definition. This will contain the path to one or more spec.gmk files. |
| SPECS := $$(addsuffix /spec.gmk, $$(addprefix $$(build_dir)/, $$(matching_confs))) |
| else |
| # No CONF or SPEC given, check the available configurations |
| ifneq ($$(words $$(all_spec_files)), 1) |
| $$(info Error: No CONF given, but more than one configuration found.) |
| $$(info Available configurations in $$(build_dir):) |
| $$(foreach var, $$(all_confs), $$(info * $$(var))) |
| $$(info Please retry building with CONF=<config pattern> (or SPEC=<spec file>).) |
| $$(info ) |
| $$(error Cannot continue) |
| endif |
| |
| # We found exactly one configuration, use it |
| SPECS := $$(strip $$(all_spec_files)) |
| endif |
| endif |
| endef |
| |
| # Extract main targets from Main.gmk using the spec provided in $2. |
| # |
| # Param 1: FORCE = force generation of main-targets.gmk or LAZY = do not force. |
| # Param 2: The SPEC file to use. |
| define DefineMainTargets |
| |
| # We will start by making sure the main-targets.gmk file is removed, if |
| # make has not been restarted. By the -include, we will trigger the |
| # rule for generating the file (which is never there since we removed it), |
| # thus generating it fresh, and make will restart, incrementing the restart |
| # count. |
| main_targets_file := $$(dir $(strip $2))make-support/main-targets.gmk |
| |
| ifeq ($$(MAKE_RESTARTS),) |
| # Only do this if make has not been restarted, and if we do not force it. |
| ifeq ($(strip $1), FORCE) |
| $$(shell rm -f $$(main_targets_file)) |
| endif |
| endif |
| |
| $$(main_targets_file): |
| @( cd $$(topdir) && \ |
| $$(MAKE) $$(MAKE_LOG_FLAGS) -r -R -f $$(topdir)/make/Main.gmk \ |
| -I $$(topdir)/make/common SPEC=$(strip $2) NO_RECIPES=true \ |
| $$(MAKE_LOG_VARS) \ |
| create-main-targets-include ) |
| |
| # Now include main-targets.gmk. This will define ALL_MAIN_TARGETS. |
| -include $$(main_targets_file) |
| endef |
| |
| define PrintConfCheckFailed |
| @echo ' ' |
| @echo "Please rerun configure! Easiest way to do this is by running" |
| @echo "'make reconfigure'." |
| @echo "This behavior may also be changed using CONF_CHECK=<ignore|auto>." |
| @echo ' ' |
| endef |
| |
| else # $(HAS_SPEC)=true |
| ############################################################################## |
| # Helper functions for the 'main' target. These functions assume a single, |
| # proper and existing SPEC is included. |
| ############################################################################## |
| |
| include $(TOPDIR)/make/common/MakeBase.gmk |
| |
| # Define basic logging setup |
| BUILD_LOG := $(OUTPUTDIR)/build.log |
| BUILD_PROFILE_LOG := $(OUTPUTDIR)/build-profile.log |
| |
| BUILD_LOG_PIPE := > >($(TEE) -a $(BUILD_LOG)) 2> >($(TEE) -a $(BUILD_LOG) >&2) && wait |
| |
| # Parse COMPARE_BUILD into COMPARE_BUILD_* |
| # Syntax: COMPARE_BUILD=CONF=<configure options>:PATCH=<patch file>: |
| # MAKE=<make targets>:COMP_OPTS=<compare script options>: |
| # COMP_DIR=<compare script base dir>|<default>: |
| # FAIL=<bool> |
| # If neither CONF or PATCH is given, assume <default> means CONF if it |
| # begins with "--", otherwise assume it means PATCH. |
| # MAKE and COMP_OPTS can only be used with CONF and/or PATCH specified. |
| # If any value contains "+", it will be replaced by space. |
| # FAIL can be set to false to have the return value of compare be ignored. |
| define ParseCompareBuild |
| ifneq ($$(COMPARE_BUILD), ) |
| COMPARE_BUILD_OUTPUTDIR := $(TOPDIR)/build/compare-build/$(CONF_NAME) |
| COMPARE_BUILD_FAIL := true |
| |
| ifneq ($$(findstring :, $$(COMPARE_BUILD)), ) |
| $$(foreach part, $$(subst :, , $$(COMPARE_BUILD)), \ |
| $$(if $$(filter PATCH=%, $$(part)), \ |
| $$(eval COMPARE_BUILD_PATCH=$$(strip $$(patsubst PATCH=%, %, $$(part)))) \ |
| ) \ |
| $$(if $$(filter CONF=%, $$(part)), \ |
| $$(eval COMPARE_BUILD_CONF=$$(strip $$(subst +, , $$(patsubst CONF=%, %, $$(part))))) \ |
| ) \ |
| $$(if $$(filter MAKE=%, $$(part)), \ |
| $$(eval COMPARE_BUILD_MAKE=$$(strip $$(subst +, , $$(patsubst MAKE=%, %, $$(part))))) \ |
| ) \ |
| $$(if $$(filter COMP_OPTS=%, $$(part)), \ |
| $$(eval COMPARE_BUILD_COMP_OPTS=$$(strip $$(subst +, , $$(patsubst COMP_OPTS=%, %, $$(part))))) \ |
| ) \ |
| $$(if $$(filter COMP_DIR=%, $$(part)), \ |
| $$(eval COMPARE_BUILD_COMP_DIR=$$(strip $$(subst +, , $$(patsubst COMP_DIR=%, %, $$(part))))) \ |
| ) \ |
| $$(if $$(filter FAIL=%, $$(part)), \ |
| $$(eval COMPARE_BUILD_FAIL=$$(strip $$(subst +, , $$(patsubst FAIL=%, %, $$(part))))) \ |
| ) \ |
| ) |
| else |
| # Separate handling for single field case, to allow for spaces in values. |
| ifneq ($$(filter PATCH=%, $$(COMPARE_BUILD)), ) |
| COMPARE_BUILD_PATCH=$$(strip $$(patsubst PATCH=%, %, $$(COMPARE_BUILD))) |
| else ifneq ($$(filter CONF=%, $$(COMPARE_BUILD)), ) |
| COMPARE_BUILD_CONF=$$(strip $$(subst +, , $$(patsubst CONF=%, %, $$(COMPARE_BUILD)))) |
| else ifneq ($$(filter --%, $$(COMPARE_BUILD)), ) |
| # Assume CONF if value begins with -- |
| COMPARE_BUILD_CONF=$$(strip $$(subst +, , $$(COMPARE_BUILD))) |
| else |
| # Otherwise assume patch file |
| COMPARE_BUILD_PATCH=$$(strip $$(COMPARE_BUILD)) |
| endif |
| endif |
| ifneq ($$(COMPARE_BUILD_PATCH), ) |
| ifneq ($$(wildcard $$(TOPDIR)/$$(COMPARE_BUILD_PATCH)), ) |
| # Assume relative path, if file exists |
| COMPARE_BUILD_PATCH := $$(wildcard $$(TOPDIR)/$$(COMPARE_BUILD_PATCH)) |
| else ifeq ($$(wildcard $$(COMPARE_BUILD_PATCH)), ) |
| $$(error Patch file $$(COMPARE_BUILD_PATCH) does not exist) |
| endif |
| endif |
| ifneq ($$(COMPARE_BUILD_FAIL), true) |
| COMPARE_BUILD_IGNORE_RESULT := || true |
| endif |
| endif |
| endef |
| |
| # Prepare for a comparison rebuild |
| define PrepareCompareBuild |
| $(ECHO) "Preparing for comparison rebuild" |
| # Apply patch, if any |
| $(if $(COMPARE_BUILD_PATCH), $(PATCH) -p1 < $(COMPARE_BUILD_PATCH)) |
| # Move the first build away temporarily |
| $(RM) -r $(TOPDIR)/build/.compare-build-temp |
| $(MKDIR) -p $(TOPDIR)/build/.compare-build-temp |
| $(MV) $(OUTPUTDIR) $(TOPDIR)/build/.compare-build-temp |
| # Restore an old compare-build, or create a new compare-build directory. |
| if test -d $(COMPARE_BUILD_OUTPUTDIR); then \ |
| $(MV) $(COMPARE_BUILD_OUTPUTDIR) $(OUTPUTDIR); \ |
| else \ |
| $(MKDIR) -p $(OUTPUTDIR); \ |
| fi |
| # Re-run configure with the same arguments (and possibly some additional), |
| # must be done after patching. |
| ( cd $(OUTPUTDIR) && PATH="$(ORIGINAL_PATH)" \ |
| $(BASH) $(TOPDIR)/configure $(CONFIGURE_COMMAND_LINE) $(COMPARE_BUILD_CONF)) |
| endef |
| |
| # Cleanup after a compare build |
| define CleanupCompareBuild |
| # If running with a COMPARE_BUILD patch, reverse-apply it |
| $(if $(COMPARE_BUILD_PATCH), $(PATCH) -R -p1 < $(COMPARE_BUILD_PATCH)) |
| # Move this build away and restore the original build |
| $(MKDIR) -p $(TOPDIR)/build/compare-build |
| $(MV) $(OUTPUTDIR) $(COMPARE_BUILD_OUTPUTDIR) |
| $(MV) $(TOPDIR)/build/.compare-build-temp/$(CONF_NAME) $(OUTPUTDIR) |
| $(RM) -r $(TOPDIR)/build/.compare-build-temp |
| endef |
| |
| # Do the actual comparison of two builds |
| define CompareBuildDoComparison |
| # Compare first and second build. Ignore any error code from compare.sh. |
| $(ECHO) "Comparing between comparison rebuild (this/new) and baseline (other/old)" |
| $(if $(COMPARE_BUILD_COMP_DIR), \ |
| +(cd $(COMPARE_BUILD_OUTPUTDIR) && ./compare.sh $(COMPARE_BUILD_COMP_OPTS) \ |
| -2dirs $(COMPARE_BUILD_OUTPUTDIR)/$(COMPARE_BUILD_COMP_DIR) \ |
| $(OUTPUTDIR)/$(COMPARE_BUILD_COMP_DIR) $(COMPARE_BUILD_IGNORE_RESULT)), \ |
| +(cd $(COMPARE_BUILD_OUTPUTDIR) && ./compare.sh $(COMPARE_BUILD_COMP_OPTS) \ |
| -o $(OUTPUTDIR) $(COMPARE_BUILD_IGNORE_RESULT)) \ |
| ) |
| endef |
| |
| define PrintFailureReports |
| $(if $(wildcard $(MAKESUPPORT_OUTPUTDIR)/failure-logs/*.log), \ |
| $(PRINTF) "\n=== Output from failing command(s) repeated here ===\n" $(NEWLINE) \ |
| $(foreach logfile, $(sort $(wildcard $(MAKESUPPORT_OUTPUTDIR)/failure-logs/*.log)), \ |
| $(PRINTF) "* For target $(notdir $(basename $(logfile))):\n" $(NEWLINE) \ |
| ($(GREP) -v -e "^Note: including file:" < $(logfile) || true) | $(HEAD) -n 12 $(NEWLINE) \ |
| if test `$(WC) -l < $(logfile)` -gt 12; then \ |
| $(ECHO) " ... (rest of output omitted)" ; \ |
| fi $(NEWLINE) \ |
| ) \ |
| $(PRINTF) "\n* All command lines available in $(MAKESUPPORT_OUTPUTDIR)/failure-logs.\n" $(NEWLINE) \ |
| $(PRINTF) "=== End of repeated output ===\n" \ |
| ) |
| endef |
| |
| define PrintBuildLogFailures |
| if $(GREP) -q "recipe for target .* failed" $(BUILD_LOG) 2> /dev/null; then \ |
| $(PRINTF) "\n=== Make failed targets repeated here ===\n" ; \ |
| $(GREP) "recipe for target .* failed" $(BUILD_LOG) ; \ |
| $(PRINTF) "=== End of repeated output ===\n" ; \ |
| $(PRINTF) "\nHint: Try searching the build log for the name of the first failed target.\n" ; \ |
| else \ |
| $(PRINTF) "\nNo indication of failed target found.\n" ; \ |
| $(PRINTF) "Hint: Try searching the build log for '] Error'.\n" ; \ |
| fi |
| endef |
| |
| define RotateLogFiles |
| $(RM) $(BUILD_LOG).old 2> /dev/null && \ |
| $(MV) $(BUILD_LOG) $(BUILD_LOG).old 2> /dev/null || true |
| $(if $(findstring true, $(LOG_PROFILE_TIMES_FILE)), \ |
| $(RM) $(BUILD_PROFILE_LOG).old 2> /dev/null && \ |
| $(MV) $(BUILD_PROFILE_LOG) $(BUILD_PROFILE_LOG).old 2> /dev/null || true \ |
| ) |
| endef |
| |
| define PrepareFailureLogs |
| $(RM) -r $(MAKESUPPORT_OUTPUTDIR)/failure-logs 2> /dev/null && \ |
| $(MKDIR) -p $(MAKESUPPORT_OUTPUTDIR)/failure-logs |
| $(RM) $(MAKESUPPORT_OUTPUTDIR)/exit-with-error 2> /dev/null |
| endef |
| |
| # Remove any javac server logs and port files. This |
| # prevents a new make run to reuse the previous servers. |
| define PrepareSmartJavac |
| $(if $(SJAVAC_SERVER_DIR), \ |
| $(RM) -r $(SJAVAC_SERVER_DIR) 2> /dev/null && \ |
| $(MKDIR) -p $(SJAVAC_SERVER_DIR) \ |
| ) |
| endef |
| |
| define CleanupSmartJavac |
| [ -f $(SJAVAC_SERVER_DIR)/server.port ] && $(ECHO) Stopping sjavac server && \ |
| $(TOUCH) $(SJAVAC_SERVER_DIR)/server.port.stop; true |
| endef |
| |
| ifeq ($(OPENJDK_BUILD_OS), windows) |
| # On windows we need to synchronize with the javac server to be able to |
| # move or remove the build output directory. Since we have no proper |
| # synchronization process, wait for a while and hope it helps. This is only |
| # used by build comparisons. |
| define WaitForSmartJavacFinish |
| $(if $(SJAVAC_SERVER_DIR), \ |
| sleep 5\ |
| ) |
| endef |
| else |
| define WaitForSmartJavacFinish |
| endef |
| endif |
| |
| define StartGlobalTimer |
| $(RM) -r $(BUILDTIMESDIR) 2> /dev/null && \ |
| $(MKDIR) -p $(BUILDTIMESDIR) && \ |
| $(call RecordStartTime,TOTAL) |
| endef |
| |
| define StopGlobalTimer |
| $(call RecordEndTime,TOTAL) |
| endef |
| |
| # Find all build_time_* files and print their contents in a list sorted |
| # on the name of the sub repository. |
| define ReportBuildTimes |
| $(PRINTF) $(LOG_INFO) -- \ |
| "----- Build times -------\nStart %s\nEnd %s\n%s\n%s\n-------------------------\n" \ |
| "`$(CAT) $(BUILDTIMESDIR)/build_time_start_TOTAL_human_readable`" \ |
| "`$(CAT) $(BUILDTIMESDIR)/build_time_end_TOTAL_human_readable`" \ |
| "`$(LS) $(BUILDTIMESDIR)/build_time_diff_* | $(GREP) -v _TOTAL | \ |
| $(XARGS) $(CAT) | $(SORT) -k 2`" \ |
| "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_TOTAL`" \ |
| $(BUILD_LOG_PIPE) |
| endef |
| |
| define ReportProfileTimes |
| $(if $(findstring true, $(LOG_PROFILE_TIMES_LOG)), \ |
| [ ! -f $(BUILD_PROFILE_LOG) ] || \ |
| { $(ECHO) Begin $(notdir $(BUILD_PROFILE_LOG)) && \ |
| $(CAT) $(BUILD_PROFILE_LOG) && \ |
| $(ECHO) End $(notdir $(BUILD_PROFILE_LOG)); \ |
| } \ |
| $(BUILD_LOG_PIPE) |
| ) |
| endef |
| |
| endif # HAS_SPEC |
| |
| MAKE_LOG_VARS = $(foreach v, \ |
| LOG_LEVEL LOG_NOFILE LOG_CMDLINES LOG_PROFILE_TIMES_LOG LOG_PROFILE_TIMES_FILE, \ |
| $v=$($v) \ |
| ) |
| |
| endif # _INITSUPPORT_GMK |