| # |
| # Copyright (c) 1998, 2015, Oracle and/or its affiliates. All rights reserved. |
| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| # |
| # This code is free software; you can redistribute it and/or modify it |
| # under the terms of the GNU General Public License version 2 only, as |
| # published by the Free Software Foundation. |
| # |
| # This code is distributed in the hope that it will be useful, but WITHOUT |
| # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| # version 2 for more details (a copy is included in the LICENSE file that |
| # accompanied this code). |
| # |
| # You should have received a copy of the GNU General Public License version |
| # 2 along with this work; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| # |
| # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| # or visit www.oracle.com if you need additional information or have any |
| # questions. |
| # |
| # |
| |
| # Note: this makefile is invoked both from build.bat and from the J2SE |
| # control workspace in exactly the same manner; the required |
| # environment variables (Variant, WorkSpace, BootStrapDir, BuildUser, HOTSPOT_BUILD_VERSION) |
| # are passed in as command line arguments. |
| |
| # Note: Running nmake or build.bat from the Windows command shell requires |
| # that "sh" be accessible on the PATH. An MKS install does this. |
| |
| # If we haven't set an ARCH yet use x86 |
| # create.bat and build.bat will set it, if used. |
| !ifndef ARCH |
| ARCH=x86 |
| !endif |
| |
| |
| # Must be one of these values (if value comes in from env, can't trust it) |
| !if "$(ARCH)" != "x86" |
| !if "$(ARCH)" != "ia64" |
| ARCH=x86 |
| !endif |
| !endif |
| |
| # At this point we should be certain that ARCH has a definition |
| # now determine the BUILDARCH |
| # |
| |
| # the default BUILDARCH |
| BUILDARCH=i486 |
| |
| # Allow control workspace to force Itanium or AMD64 builds with LP64 |
| ARCH_TEXT= |
| !ifdef LP64 |
| !if "$(LP64)" == "1" |
| ARCH_TEXT=64-Bit |
| !if "$(ARCH)" == "x86" |
| BUILDARCH=amd64 |
| !else |
| BUILDARCH=ia64 |
| !endif |
| !endif |
| !endif |
| |
| !if "$(BUILDARCH)" != "ia64" |
| !ifndef CC_INTERP |
| !ifndef FORCE_TIERED |
| FORCE_TIERED=1 |
| !endif |
| !endif |
| !endif |
| |
| !if "$(BUILDARCH)" == "amd64" |
| Platform_arch=x86 |
| Platform_arch_model=x86_64 |
| !endif |
| !if "$(BUILDARCH)" == "i486" |
| Platform_arch=x86 |
| Platform_arch_model=x86_32 |
| !endif |
| |
| # Supply these from the command line or the environment |
| # It doesn't make sense to default this one |
| Variant= |
| # It doesn't make sense to default this one |
| WorkSpace= |
| |
| variantDir = windows_$(BUILDARCH)_$(Variant) |
| |
| realVariant=$(Variant) |
| VARIANT_TEXT=Core |
| !if "$(Variant)" == "compiler1" |
| VARIANT_TEXT=Client |
| !elseif "$(Variant)" == "compiler2" |
| !if "$(FORCE_TIERED)" == "1" |
| VARIANT_TEXT=Server |
| realVariant=tiered |
| !else |
| VARIANT_TEXT=Server |
| !endif |
| !elseif "$(Variant)" == "tiered" |
| VARIANT_TEXT=Tiered |
| !endif |
| |
| ######################################################################### |
| # Parameters for VERSIONINFO resource for jvm.dll. |
| # These can be overridden via the nmake.exe command line. |
| # They are overridden by RE during the control builds. |
| # |
| !include "$(WorkSpace)/make/jdk_version" |
| |
| # Define HOTSPOT_VM_DISTRO based on settings in make/openjdk_distro |
| # or make/hotspot_distro. |
| !ifndef HOTSPOT_VM_DISTRO |
| !ifndef OPENJDK |
| !if exists($(WorkSpace)\src\closed) |
| !include $(WorkSpace)\make\hotspot_distro |
| !else |
| !include $(WorkSpace)\make\openjdk_distro |
| !endif |
| !else |
| !include $(WorkSpace)\make\openjdk_distro |
| !endif |
| !endif |
| |
| HS_FILEDESC=$(HOTSPOT_VM_DISTRO) $(ARCH_TEXT) $(VARIANT_TEXT) VM |
| |
| # JDK ProductVersion: |
| # 1.5.0_<wx>-b<yz> will have DLL version 5.0.wx*10.yz |
| # Thus, 1.5.0_10-b04 will be 5.0.100.4 |
| # 1.6.0-b01 will be 6.0.0.1 |
| # 1.6.0_01a-b02 will be 6.0.11.2 |
| # |
| # STANDALONE_JDK_* variables are defined in make/jdk_version or on command line |
| # |
| !if "$(JDK_VER)" == "" |
| JDK_VER=$(STANDALONE_JDK_MAJOR_VER),$(STANDALONE_JDK_MINOR_VER),$(STANDALONE_JDK_SECURITY_VER),$(STANDALONE_JDK_PATCH_VER) |
| !endif |
| !if "$(JDK_DOTVER)" == "" |
| JDK_DOTVER=$(STANDALONE_JDK_MAJOR_VER).$(STANDALONE_JDK_MINOR_VER).$(STANDALONE_JDK_SECURITY_VER).$(STANDALONE_JDK_PATCH_VER) |
| !endif |
| !if "$(VERSION_SHORT)" == "" |
| VERSION_SHORT=$(STANDALONE_JDK_MAJOR_VER).$(STANDALONE_JDK_MINOR_VER).$(STANDALONE_JDK_SECURITY_VER) |
| !endif |
| |
| HS_VER=$(JDK_VER) |
| HS_DOTVER=$(JDK_DOTVER) |
| |
| !if "$(HOTSPOT_RELEASE_VERSION)" == "" |
| HOTSPOT_RELEASE_VERSION=$(VERSION_STRING) |
| !endif |
| |
| !if "$(HOTSPOT_VERSION_STRING)" == "" |
| HOTSPOT_VERSION_STRING=$(HOTSPOT_RELEASE_VERSION) |
| !endif |
| |
| # End VERSIONINFO parameters |
| |
| # if hotspot-only build and/or OPENJDK isn't passed down, need to set OPENJDK |
| !ifndef OPENJDK |
| !if !exists($(WorkSpace)\src\closed) |
| OPENJDK=true |
| !endif |
| !endif |
| |
| ######################################################################### |
| |
| defaultTarget: product |
| |
| # The product or release build is an optimized build, and is the default |
| |
| # note that since all the build targets depend on local.make that BUILDARCH |
| # and Platform_arch and Platform_arch_model will get set in local.make |
| # and there is no need to pass them thru here on the command line |
| # |
| product release optimized: checks $(variantDir) $(variantDir)\local.make sanity |
| cd $(variantDir) |
| nmake -nologo -f $(WorkSpace)\make\windows\makefiles\top.make BUILD_FLAVOR=product ARCH=$(ARCH) |
| |
| # The debug build is an optional build |
| debug: checks $(variantDir) $(variantDir)\local.make sanity |
| cd $(variantDir) |
| nmake -nologo -f $(WorkSpace)\make\windows\makefiles\top.make BUILD_FLAVOR=debug ARCH=$(ARCH) |
| fastdebug: checks $(variantDir) $(variantDir)\local.make sanity |
| cd $(variantDir) |
| nmake -nologo -f $(WorkSpace)\make\windows\makefiles\top.make BUILD_FLAVOR=fastdebug ARCH=$(ARCH) |
| |
| # target to create just the directory structure |
| tree: checks $(variantDir) $(variantDir)\local.make sanity |
| mkdir $(variantDir)\product |
| mkdir $(variantDir)\debug |
| mkdir $(variantDir)\fastdebug |
| |
| sanity: |
| @ echo; |
| @ cd $(variantDir) |
| @ nmake -nologo -f $(WorkSpace)\make\windows\makefiles\sanity.make |
| @ cd .. |
| @ echo; |
| |
| clean: checkVariant |
| - rm -r -f $(variantDir) |
| |
| $(variantDir): |
| mkdir $(variantDir) |
| |
| $(variantDir)\local.make: checks |
| @ echo # Generated file > $@ |
| @ echo Variant=$(realVariant) >> $@ |
| @ echo WorkSpace=$(WorkSpace) >> $@ |
| @ echo BootStrapDir=$(BootStrapDir) >> $@ |
| @ if "$(USERNAME)" NEQ "" echo BuildUser=$(USERNAME) >> $@ |
| @ echo HS_VER=$(HS_VER) >> $@ |
| @ echo HS_DOTVER=$(HS_DOTVER) >> $@ |
| @ echo HS_COMPANY=$(COMPANY_NAME) >> $@ |
| @ echo HS_FILEDESC=$(HS_FILEDESC) >> $@ |
| @ echo HOTSPOT_VM_DISTRO=$(HOTSPOT_VM_DISTRO) >> $@ |
| @ if "$(OPENJDK)" NEQ "" echo OPENJDK=$(OPENJDK) >> $@ |
| @ echo HS_COPYRIGHT=$(HOTSPOT_VM_COPYRIGHT) >> $@ |
| @ echo HS_NAME=$(PRODUCT_NAME) $(VERSION_SHORT) >> $@ |
| @ echo HOTSPOT_VERSION_STRING=$(HOTSPOT_VERSION_STRING) >> $@ |
| @ echo JDK_VER=$(JDK_VER) >> $@ |
| @ echo JDK_DOTVER=$(JDK_DOTVER) >> $@ |
| @ echo VERSION_STRING=$(VERSION_STRING) >> $@ |
| @ echo BUILDARCH=$(BUILDARCH) >> $@ |
| @ echo Platform_arch=$(Platform_arch) >> $@ |
| @ echo Platform_arch_model=$(Platform_arch_model) >> $@ |
| @ echo CXX=$(CXX) >> $@ |
| @ echo LD=$(LD) >> $@ |
| @ echo MT=$(MT) >> $@ |
| @ echo RC=$(RC) >> $@ |
| @ sh $(WorkSpace)/make/windows/get_msc_ver.sh >> $@ |
| @ if "$(ENABLE_FULL_DEBUG_SYMBOLS)" NEQ "" echo ENABLE_FULL_DEBUG_SYMBOLS=$(ENABLE_FULL_DEBUG_SYMBOLS) >> $@ |
| @ if "$(ZIP_DEBUGINFO_FILES)" NEQ "" echo ZIP_DEBUGINFO_FILES=$(ZIP_DEBUGINFO_FILES) >> $@ |
| @ if "$(RM)" NEQ "" echo RM=$(RM) >> $@ |
| @ if "$(CP)" NEQ "" echo CP=$(CP) >> $@ |
| @ if "$(MV)" NEQ "" echo MV=$(MV) >> $@ |
| @ if "$(ZIPEXE)" NEQ "" echo ZIPEXE=$(ZIPEXE) >> $@ |
| |
| checks: checkVariant checkWorkSpace |
| |
| checkVariant: |
| @ if "$(Variant)"=="" echo Need to specify "Variant=[tiered|compiler2|compiler1|core]" && false |
| @ if "$(Variant)" NEQ "tiered" if "$(Variant)" NEQ "compiler2" if "$(Variant)" NEQ "compiler1" if "$(Variant)" NEQ "core" \ |
| echo Need to specify "Variant=[tiered|compiler2|compiler1|core]" && false |
| |
| checkWorkSpace: |
| @ if "$(WorkSpace)"=="" echo Need to specify "WorkSpace=..." && false |
| |
| checkBuildID: |
| @ if "$(BuildID)"=="" echo Need to specify "BuildID=..." && false |