| # |
| # Copyright (c) 2016, 2017, Oracle and/or its affiliates. All rights reserved. |
| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| # |
| # This code is free software; you can redistribute it and/or modify it |
| # under the terms of the GNU General Public License version 2 only, as |
| # published by the Free Software Foundation. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the LICENSE file that accompanied this code. |
| # |
| # This code is distributed in the hope that it will be useful, but WITHOUT |
| # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| # version 2 for more details (a copy is included in the LICENSE file that |
| # accompanied this code). |
| # |
| # You should have received a copy of the GNU General Public License version |
| # 2 along with this work; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| # |
| # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| # or visit www.oracle.com if you need additional information or have any |
| # questions. |
| # |
| |
| default: all |
| |
| include $(SPEC) |
| include MakeBase.gmk |
| include FindTests.gmk |
| |
| # We will always run multiple tests serially |
| .NOTPARALLEL: |
| |
| # Directories to find jtreg tests relative to |
| JTREG_TEST_TOPDIRS := $(TOPDIR) $(JTREG_TESTROOTS) |
| |
| # Hook to include the corresponding custom file, if present. |
| $(eval $(call IncludeCustomExtension, , RunTests.gmk)) |
| |
| TEST_RESULTS_DIR := $(BUILD_OUTPUT)/test-results |
| TEST_SUPPORT_DIR := $(BUILD_OUTPUT)/test-support |
| |
| |
| ################################################################################ |
| # Parse control variables |
| ################################################################################ |
| |
| $(eval $(call ParseKeywordVariable, JTREG, \ |
| KEYWORDS := JOBS TIMEOUT TEST_MODE ASSERT VERBOSE RETAIN MAX_MEM, \ |
| STRING_KEYWORDS := OPTIONS JAVA_OPTIONS VM_OPTIONS, \ |
| )) |
| |
| ifneq ($(JTREG), ) |
| # Inform the user |
| $(info Running tests using JTREG control variable '$(JTREG)') |
| endif |
| |
| $(eval $(call ParseKeywordVariable, GTEST, \ |
| KEYWORDS := REPEAT, \ |
| STRING_KEYWORDS := OPTIONS, \ |
| )) |
| |
| ifneq ($(GTEST), ) |
| # Inform the user |
| $(info Running tests using GTEST control variable '$(GTEST)') |
| endif |
| |
| |
| ################################################################################ |
| # Component-specific Jtreg settings |
| ################################################################################ |
| |
| ifeq ($(TEST_JOBS), 0) |
| # If TEST_JOBS is not specified, hotspot fallback default is |
| # min(num_cores / 2, 12). |
| hotspot_JTREG_JOBS := $(shell $(EXPR) $(NUM_CORES) / 2) |
| ifeq ($(hotspot_JTREG_JOBS), 0) |
| hotspot_JTREG_JOBS := 1 |
| else ifeq ($(shell $(EXPR) $(hotspot_JTREG_JOBS) \> 12), 1) |
| hotspot_JTREG_JOBS := 12 |
| endif |
| endif |
| |
| hotspot_JTREG_MAX_MEM := 0 |
| hotspot_JTREG_ASSERT := false |
| hotspot_JTREG_NATIVEPATH := $(TEST_IMAGE_DIR)/hotspot/jtreg/native |
| jdk_JTREG_NATIVEPATH := $(TEST_IMAGE_DIR)/jdk/jtreg/native |
| |
| |
| ################################################################################ |
| # Parse test selection |
| # |
| # The user has given a test selection in the TEST variable. We must parse it |
| # and determine what that means in terms of actual calls to the test framework. |
| # |
| # The parse functions take as argument a test specification as given by the |
| # user, and returns a fully qualified test descriptor if it was a match, or |
| # nothing if not. A single test specification can result in multiple test |
| # descriptors being returned. A valid test descriptor must always be accepted |
| # and returned identically. |
| ################################################################################ |
| |
| # Helper function to determine if a test specification is a Gtest test |
| # |
| # It is a Gtest test if it is either "gtest", or "gtest:" followed by an optional |
| # test filter string. |
| define ParseGtestTestSelection |
| $(if $(filter gtest%, $1), \ |
| $(if $(filter gtest, $1), \ |
| gtest:all \ |
| , \ |
| $(if $(filter gtest:, $1), \ |
| gtest:all \ |
| , \ |
| $1 \ |
| ) \ |
| ) \ |
| ) |
| endef |
| |
| # Helper function to determine if a test specification is a Jtreg test |
| # |
| # It is a Jtreg test if it optionally begins with jtreg:, and then is either |
| # an unspecified group name (possibly prefixed by :), or a group in a |
| # specified test/<component> directory, or a path to a test or test directory, |
| # either absolute or relative to any of the JTREG_TEST_TOPDIRS. |
| define ParseJtregTestSelection |
| $(eval TEST_NAME := $(strip $(patsubst jtreg:%, %, $1))) \ |
| $(if $(or $(findstring :, $(TEST_NAME)), $(findstring /, $(TEST_NAME))), , \ |
| $(eval TEST_NAME := :$(TEST_NAME)) \ |
| ) \ |
| $(if $(findstring :, $(TEST_NAME)), \ |
| $(if $(filter :%, $(TEST_NAME)), \ |
| $(foreach root, $(JTREG_TESTROOTS), \ |
| $(if $(filter $(patsubst :%, %, $(TEST_NAME)), \ |
| $($(root)_JTREG_TEST_GROUPS)), \ |
| jtreg:$(root):$(patsubst :%,%,$(TEST_NAME)) \ |
| ) \ |
| ) \ |
| , \ |
| $(eval ROOT_PART := $(word 1, $(subst :, $(SPACE), $(TEST_NAME)))) \ |
| $(eval ROOT := $(filter $(addprefix %, $(ROOT_PART)), $(JTREG_TESTROOTS))) \ |
| $(eval GROUP := $(word 2, $(subst :, $(SPACE), $(TEST_NAME)))) \ |
| $(foreach root, $(ROOT), \ |
| $(if $(filter $(GROUP), $($(root)_JTREG_TEST_GROUPS)), \ |
| jtreg:$(root):$(GROUP) \ |
| ) \ |
| ) \ |
| ) \ |
| , \ |
| $(if $(filter /%, $(TEST_NAME)), \ |
| $(if $(wildcard $(TEST_NAME)), \ |
| jtreg:$(TEST_NAME) \ |
| ) \ |
| , \ |
| $(addprefix jtreg:, $(wildcard $(addsuffix /$(TEST_NAME), $(JTREG_TEST_TOPDIRS)))) \ |
| ) \ |
| ) |
| endef |
| |
| ifeq ($(TEST), ) |
| $(info No test selection given in TEST!) |
| $(info Please use e.g. 'run-test TEST=tier1' or 'run-test-tier1') |
| $(info See common/doc/testing.[md|html] for help) |
| $(error Cannot continue) |
| endif |
| |
| # Now intelligently convert the test selection given by the user in TEST |
| # into a list of fully qualified test descriptors of the tests to run. |
| TESTS_TO_RUN := |
| $(foreach test, $(TEST), \ |
| $(eval PARSED_TESTS := $(call ParseCustomTestSelection, $(test))) \ |
| $(if $(strip $(PARSED_TESTS)), , \ |
| $(eval PARSED_TESTS += $(call ParseGtestTestSelection, $(test))) \ |
| ) \ |
| $(if $(strip $(PARSED_TESTS)), , \ |
| $(eval PARSED_TESTS += $(call ParseJtregTestSelection, $(test))) \ |
| ) \ |
| $(if $(strip $(PARSED_TESTS)), , \ |
| $(eval UNKNOWN_TEST := $(test)) \ |
| ) \ |
| $(eval TESTS_TO_RUN += $(PARSED_TESTS)) \ |
| ) |
| |
| ifneq ($(UNKNOWN_TEST), ) |
| $(info Unknown test selection: '$(UNKNOWN_TEST)') |
| $(info See common/doc/testing.[md|html] for help) |
| $(error Cannot continue) |
| endif |
| |
| TESTS_TO_RUN := $(strip $(TESTS_TO_RUN)) |
| |
| |
| # Present the result of our parsing to the user |
| $(info Test selection '$(TEST)', will run:) |
| $(foreach test, $(TESTS_TO_RUN), $(info * $(test))) |
| |
| |
| ################################################################################ |
| # Functions for setting up rules for running the selected tests |
| # |
| # The SetupRun*Test functions all have the same interface: |
| # |
| # Parameter 1 is the name of the rule. This is the test id, based on the test |
| # descriptor, and this is also used as variable prefix, and the targets |
| # generated are listed in a variable by that name. |
| # |
| # Remaining parameters are named arguments. Currently this is only: |
| # TEST -- The properly formatted fully qualified test descriptor |
| # |
| # After the rule named by the test id has been executed, the following |
| # variables will be available: |
| # testid_TOTAL - the total number of tests run |
| # testid_PASSED - the number of successful tests |
| # testid_FAILED - the number of failed tests |
| # testid_ERROR - the number of tests was neither successful or failed |
| # |
| ################################################################################ |
| |
| ### Rules for Gtest |
| |
| SetupRunGtestTest = $(NamedParamsMacroTemplate) |
| define SetupRunGtestTestBody |
| $1_TEST_RESULTS_DIR := $$(TEST_RESULTS_DIR)/$1 |
| $1_TEST_SUPPORT_DIR := $$(TEST_SUPPORT_DIR)/$1 |
| |
| $1_TEST_NAME := $$(strip $$(patsubst gtest:%, %, $$($1_TEST))) |
| ifneq ($$($1_TEST_NAME), all) |
| $1_GTEST_FILTER := --gtest_filter=$$($1_TEST_NAME)* |
| endif |
| |
| ifneq ($$(GTEST_REPEAT), ) |
| $1_GTEST_REPEAT :=--gtest_repeat=$$(GTEST_REPEAT) |
| endif |
| |
| run-test-$1: |
| $$(call LogWarn) |
| $$(call LogWarn, Running test '$$($1_TEST)') |
| $$(call MakeDir, $$($1_TEST_RESULTS_DIR) $$($1_TEST_SUPPORT_DIR)) |
| $$(call ExecuteWithLog, $$($1_TEST_SUPPORT_DIR)/gtest, \ |
| $$(FIXPATH) $$(TEST_IMAGE_DIR)/hotspot/gtest/server/gtestLauncher \ |
| -jdk $(JDK_IMAGE_DIR) $$($1_GTEST_FILTER) \ |
| --gtest_output=xml:$$($1_TEST_RESULTS_DIR)/gtest.xml \ |
| $$($1_GTEST_REPEAT) $$(GTEST_OPTIONS) \ |
| > >($(TEE) $$($1_TEST_RESULTS_DIR)/gtest.txt) || true ) |
| |
| $1_RESULT_FILE := $$($1_TEST_RESULTS_DIR)/gtest.txt |
| |
| parse-test-$1: run-test-$1 |
| $$(call LogWarn, Finished running test '$$($1_TEST)') |
| $$(call LogWarn, Test report is stored in $$(strip \ |
| $$(subst $$(TOPDIR)/, , $$($1_TEST_RESULTS_DIR)))) |
| $$(eval $1_TOTAL := $$(shell $$(AWK) '/==========.* tests? from .* \ |
| test cases? ran/ { print $$$$2 }' $$($1_RESULT_FILE))) |
| $$(eval $1_PASSED := $$(shell $$(AWK) '/\[ PASSED \] .* tests?./ \ |
| { print $$$$4 }' $$($1_RESULT_FILE))) |
| $$(eval $1_FAILED := $$(shell $$(AWK) '/\[ FAILED \] .* tests?, \ |
| listed below/ { print $$$$4 }' $$($1_RESULT_FILE))) |
| $$(if $$($1_FAILED), , $$(eval $1_FAILED := 0)) |
| $$(eval $1_ERROR := $$(shell \ |
| $$(EXPR) $$($1_TOTAL) - $$($1_PASSED) - $$($1_FAILED))) |
| |
| $1: run-test-$1 parse-test-$1 |
| |
| TARGETS += $1 |
| endef |
| |
| ################################################################################ |
| |
| ### Rules for Jtreg |
| |
| # Helper function for SetupRunJtregTest. Set a JTREG_* variable from, in order: |
| # 1) Specified by user on command line |
| # 2) Component-specific default |
| # 3) Generic default |
| # |
| # Note: No spaces are allowed around the arguments. |
| # Arg $1 The test ID (i.e. $1 in SetupRunJtregTest) |
| # Arg $2 Base variable, e.g. JTREG_JOBS |
| # Arg $3 The default value (optional) |
| define SetJtregValue |
| ifneq ($$($2), ) |
| $1_$2 := $$($2) |
| else |
| ifneq ($$($$($1_COMPONENT)_$2), ) |
| $1_$2 := $$($$($1_COMPONENT)_$2) |
| else |
| ifneq ($3, ) |
| $1_$2 := $3 |
| endif |
| endif |
| endif |
| endef |
| |
| SetupRunJtregTest = $(NamedParamsMacroTemplate) |
| define SetupRunJtregTestBody |
| $1_TEST_RESULTS_DIR := $$(TEST_RESULTS_DIR)/$1 |
| $1_TEST_SUPPORT_DIR := $$(TEST_SUPPORT_DIR)/$1 |
| |
| $1_TEST_NAME := $$(strip $$(patsubst jtreg:%, %, $$($1_TEST))) |
| $1_COMPONENT := $$(firstword $$(subst /, $$(SPACE), \ |
| $$(patsubst test/%, %, $$($1_TEST_NAME)))) |
| |
| ifeq ($$(JT_HOME), ) |
| $$(info Error: jtreg framework is not found.) |
| $$(info Please run configure using --with-jtreg.) |
| $$(error Cannot continue) |
| endif |
| |
| # Unfortunately, we need different defaults for some JTREG values, |
| # depending on what component we're running. |
| |
| # Convert JTREG_foo into $1_JTREG_foo with a suitable value. |
| $$(eval $$(call SetJtregValue,$1,JTREG_TEST_MODE,agentvm)) |
| $$(eval $$(call SetJtregValue,$1,JTREG_ASSERT,true)) |
| $$(eval $$(call SetJtregValue,$1,JTREG_MAX_MEM,512m)) |
| $$(eval $$(call SetJtregValue,$1,JTREG_NATIVEPATH)) |
| $$(eval $$(call SetJtregValue,$1,JTREG_BASIC_OPTIONS)) |
| |
| ifneq ($(TEST_JOBS), 0) |
| # User has specified TEST_JOBS, use that as fallback default |
| $$(eval $$(call SetJtregValue,$1,JTREG_JOBS,$$(TEST_JOBS))) |
| else |
| # Use JOBS as default (except for hotspot) |
| $$(eval $$(call SetJtregValue,$1,JTREG_JOBS,$$(JOBS))) |
| endif |
| |
| ifeq ($$(shell $$(EXPR) $$($1_JTREG_JOBS) \> 50), 1) |
| # Until CODETOOLS-7901892 is fixed, JTreg cannot handle more than 50 jobs |
| $1_JTREG_JOBS := 50 |
| endif |
| |
| # Make sure MaxRAMPercentage is high enough to not cause OOM or swapping since |
| # we may end up with a lot of JVM's |
| $1_JTREG_MAX_RAM_PERCENTAGE := $$(shell $$(EXPR) 25 / $$($1_JTREG_JOBS)) |
| |
| JTREG_TIMEOUT ?= 4 |
| JTREG_VERBOSE ?= fail,error,summary |
| JTREG_RETAIN ?= fail,error |
| |
| ifneq ($$($1_JTREG_MAX_MEM), 0) |
| $1_JTREG_BASIC_OPTIONS += -vmoption:-Xmx$$($1_JTREG_MAX_MEM) |
| $1_JTREG_LAUNCHER_OPTIONS += -Xmx$$($1_JTREG_MAX_MEM) |
| endif |
| |
| $1_JTREG_BASIC_OPTIONS += -$$($1_JTREG_TEST_MODE) \ |
| -verbose:$$(JTREG_VERBOSE) -retain:$$(JTREG_RETAIN) \ |
| -concurrency:$$($1_JTREG_JOBS) -timeoutFactor:$$(JTREG_TIMEOUT) \ |
| -vmoption:-XX:MaxRAMPercentage=$$($1_JTREG_MAX_RAM_PERCENTAGE) |
| |
| $1_JTREG_BASIC_OPTIONS += -automatic -keywords:\!ignore -ignore:quiet |
| |
| # Some tests needs to find a boot JDK using the JDK8_HOME variable. |
| $1_JTREG_BASIC_OPTIONS += -e:JDK8_HOME=$$(BOOT_JDK) |
| |
| $1_JTREG_BASIC_OPTIONS += \ |
| $$(addprefix -javaoption:, $$(JTREG_JAVA_OPTIONS)) \ |
| $$(addprefix -vmoption:, $$(JTREG_VM_OPTIONS)) \ |
| # |
| |
| ifeq ($$($1_JTREG_ASSERT), true) |
| $1_JTREG_BASIC_OPTIONS += -ea -esa |
| endif |
| |
| ifneq ($$($1_JTREG_NATIVEPATH), ) |
| $1_JTREG_BASIC_OPTIONS += -nativepath:$$($1_JTREG_NATIVEPATH) |
| endif |
| |
| ifneq ($$(JIB_JAR), ) |
| $1_JTREG_BASIC_OPTIONS += -cpa:$$(JIB_JAR) |
| endif |
| |
| run-test-$1: |
| $$(call LogWarn) |
| $$(call LogWarn, Running test '$$($1_TEST)') |
| $$(call MakeDir, $$($1_TEST_RESULTS_DIR) $$($1_TEST_SUPPORT_DIR)) |
| $$(call ExecuteWithLog, $$($1_TEST_SUPPORT_DIR)/jtreg, \ |
| $$(JAVA) $$($1_JTREG_LAUNCHER_OPTIONS) \ |
| -Dprogram=jtreg -jar $$(JT_HOME)/lib/jtreg.jar \ |
| $$($1_JTREG_BASIC_OPTIONS) \ |
| -testjdk:$$(JDK_IMAGE_DIR) \ |
| -dir:$$(TOPDIR) \ |
| -reportDir:$$($1_TEST_RESULTS_DIR) \ |
| -workDir:$$($1_TEST_SUPPORT_DIR) \ |
| $$(JTREG_OPTIONS) \ |
| $$($1_TEST_NAME) || true ) |
| |
| $1_RESULT_FILE := $$($1_TEST_RESULTS_DIR)/text/stats.txt |
| |
| parse-test-$1: run-test-$1 |
| $$(call LogWarn, Finished running test '$$($1_TEST)') |
| $$(call LogWarn, Test report is stored in $$(strip \ |
| $$(subst $$(TOPDIR)/, , $$($1_TEST_RESULTS_DIR)))) |
| $$(eval $1_PASSED := $$(shell $$(AWK) '{ gsub(/[,;]/, ""); \ |
| for (i=1; i<=NF; i++) { if ($$$$i == "passed:") \ |
| print $$$$(i+1) } }' $$($1_RESULT_FILE))) |
| $$(if $$($1_PASSED), , $$(eval $1_PASSED := 0)) |
| $$(eval $1_FAILED := $$(shell $$(AWK) '{gsub(/[,;]/, ""); \ |
| for (i=1; i<=NF; i++) { if ($$$$i == "failed:") \ |
| print $$$$(i+1) } }' $$($1_RESULT_FILE))) |
| $$(if $$($1_FAILED), , $$(eval $1_FAILED := 0)) |
| $$(eval $1_ERROR := $$(shell $$(AWK) '{gsub(/[,;]/, ""); \ |
| for (i=1; i<=NF; i++) { if ($$$$i == "error:") \ |
| print $$$$(i+1) } }' $$($1_RESULT_FILE))) |
| $$(if $$($1_ERROR), , $$(eval $1_ERROR := 0)) |
| $$(eval $1_TOTAL := $$(shell \ |
| $$(EXPR) $$($1_PASSED) + $$($1_FAILED) + $$($1_ERROR))) |
| |
| $1: run-test-$1 parse-test-$1 |
| |
| TARGETS += $1 |
| endef |
| |
| |
| ################################################################################ |
| # Setup and execute make rules for all selected tests |
| ################################################################################ |
| |
| # Helper function to determine which handler to use for the given test |
| UseGtestTestHandler = \ |
| $(if $(filter gtest:%, $1), true) |
| |
| UseJtregTestHandler = \ |
| $(if $(filter jtreg:%, $1), true) |
| |
| # Now process each test to run and setup a proper make rule |
| $(foreach test, $(TESTS_TO_RUN), \ |
| $(eval TEST_ID := $(shell $(ECHO) $(strip $(test)) | \ |
| $(TR) -cs '[a-z][A-Z][0-9]\n' '_')) \ |
| $(eval ALL_TEST_IDS += $(TEST_ID)) \ |
| $(if $(call UseCustomTestHandler, $(test)), \ |
| $(eval $(call SetupRunCustomTest, $(TEST_ID), \ |
| TEST := $(test), \ |
| )) \ |
| ) \ |
| $(if $(call UseGtestTestHandler, $(test)), \ |
| $(eval $(call SetupRunGtestTest, $(TEST_ID), \ |
| TEST := $(test), \ |
| )) \ |
| ) \ |
| $(if $(call UseJtregTestHandler, $(test)), \ |
| $(eval $(call SetupRunJtregTest, $(TEST_ID), \ |
| TEST := $(test), \ |
| )) \ |
| ) \ |
| ) |
| |
| # Sort also removes duplicates, so if there is any we'll get fewer words. |
| ifneq ($(words $(ALL_TEST_IDS)), $(words $(sort $(ALL_TEST_IDS)))) |
| $(error Duplicate test specification) |
| endif |
| |
| |
| ################################################################################ |
| # The main target for RunTests.gmk |
| ################################################################################ |
| |
| # The SetupRun*Test functions have populated TARGETS. |
| |
| TEST_FAILURE := false |
| |
| run-test: $(TARGETS) |
| # Print a table of the result of all tests run and their result |
| $(ECHO) |
| $(ECHO) ============================== |
| $(ECHO) Test summary |
| $(ECHO) ============================== |
| $(PRINTF) "%2s %-49s %5s %5s %5s %5s %2s\n" " " TEST \ |
| TOTAL PASS FAIL ERROR " " |
| $(foreach test, $(TESTS_TO_RUN), \ |
| $(eval TEST_ID := $(shell $(ECHO) $(strip $(test)) | \ |
| $(TR) -cs '[a-z][A-Z][0-9]\n' '_')) \ |
| $(if $(filter $($(TEST_ID)_PASSED), $($(TEST_ID)_TOTAL)), \ |
| $(PRINTF) "%2s %-49s %5d %5d %5d %5d %2s\n" " " "$(test)" \ |
| $($(TEST_ID)_TOTAL) $($(TEST_ID)_PASSED) $($(TEST_ID)_FAILED) \ |
| $($(TEST_ID)_ERROR) " " $(NEWLINE) \ |
| , \ |
| $(PRINTF) "%2s %-49s %5d %5d %5d %5d %2s\n" ">>" "$(test)" \ |
| $($(TEST_ID)_TOTAL) $($(TEST_ID)_PASSED) $($(TEST_ID)_FAILED) \ |
| $($(TEST_ID)_ERROR) "<<" $(NEWLINE) \ |
| $(eval TEST_FAILURE := true) \ |
| ) \ |
| ) |
| $(ECHO) ============================== |
| $(if $(filter true, $(TEST_FAILURE)), \ |
| $(ECHO) TEST FAILURE $(NEWLINE) \ |
| $(TOUCH) $(MAKESUPPORT_OUTPUTDIR)/exit-with-error \ |
| , \ |
| $(ECHO) TEST SUCCESS \ |
| ) |
| $(ECHO) |
| |
| ################################################################################ |
| |
| all: run-test |
| |
| .PHONY: default all run-test $(TARGETS) |