| /* |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <unistd.h> |
| #include <string.h> |
| |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/functionfs.h> |
| #include <sys/ioctl.h> |
| #include <sys/types.h> |
| #include <dirent.h> |
| #include <errno.h> |
| |
| #include "sysdeps.h" |
| |
| #define TRACE_TAG TRACE_USB |
| #include "adb.h" |
| |
| #define MAX_PACKET_SIZE_FS 64 |
| #define MAX_PACKET_SIZE_HS 512 |
| #define MAX_PACKET_SIZE_SS 1024 |
| |
| #define cpu_to_le16(x) htole16(x) |
| #define cpu_to_le32(x) htole32(x) |
| |
| struct usb_handle |
| { |
| adb_cond_t notify; |
| adb_mutex_t lock; |
| |
| int (*write)(usb_handle *h, const void *data, int len); |
| int (*read)(usb_handle *h, void *data, int len); |
| void (*kick)(usb_handle *h); |
| |
| // Legacy f_adb |
| int fd; |
| |
| // FunctionFS |
| int control; |
| int bulk_out; /* "out" from the host's perspective => source for adbd */ |
| int bulk_in; /* "in" from the host's perspective => sink for adbd */ |
| }; |
| |
| struct func_desc { |
| struct usb_interface_descriptor intf; |
| struct usb_endpoint_descriptor_no_audio source; |
| struct usb_endpoint_descriptor_no_audio sink; |
| } __attribute__((packed)); |
| |
| struct desc_v1 { |
| struct usb_functionfs_descs_head_v1 { |
| __le32 magic; |
| __le32 length; |
| __le32 fs_count; |
| __le32 hs_count; |
| } __attribute__((packed)) header; |
| struct func_desc fs_descs, hs_descs; |
| } __attribute__((packed)); |
| |
| struct desc_v2 { |
| struct usb_functionfs_descs_head_v2 header; |
| // The rest of the structure depends on the flags in the header. |
| __le32 fs_count; |
| __le32 hs_count; |
| struct func_desc fs_descs, hs_descs; |
| } __attribute__((packed)); |
| |
| struct func_desc fs_descriptors = { |
| .intf = { |
| .bLength = sizeof(fs_descriptors.intf), |
| .bDescriptorType = USB_DT_INTERFACE, |
| .bInterfaceNumber = 0, |
| .bNumEndpoints = 2, |
| .bInterfaceClass = ADB_CLASS, |
| .bInterfaceSubClass = ADB_SUBCLASS, |
| .bInterfaceProtocol = ADB_PROTOCOL, |
| .iInterface = 1, /* first string from the provided table */ |
| }, |
| .source = { |
| .bLength = sizeof(fs_descriptors.source), |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = 1 | USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = MAX_PACKET_SIZE_FS, |
| }, |
| .sink = { |
| .bLength = sizeof(fs_descriptors.sink), |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = 2 | USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = MAX_PACKET_SIZE_FS, |
| }, |
| }; |
| |
| struct func_desc hs_descriptors = { |
| .intf = { |
| .bLength = sizeof(hs_descriptors.intf), |
| .bDescriptorType = USB_DT_INTERFACE, |
| .bInterfaceNumber = 0, |
| .bNumEndpoints = 2, |
| .bInterfaceClass = ADB_CLASS, |
| .bInterfaceSubClass = ADB_SUBCLASS, |
| .bInterfaceProtocol = ADB_PROTOCOL, |
| .iInterface = 1, /* first string from the provided table */ |
| }, |
| .source = { |
| .bLength = sizeof(hs_descriptors.source), |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = 1 | USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = MAX_PACKET_SIZE_HS, |
| }, |
| .sink = { |
| .bLength = sizeof(hs_descriptors.sink), |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = 2 | USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = MAX_PACKET_SIZE_HS, |
| }, |
| }; |
| |
| #define STR_INTERFACE_ "ADB Interface" |
| |
| static const struct { |
| struct usb_functionfs_strings_head header; |
| struct { |
| __le16 code; |
| const char str1[sizeof(STR_INTERFACE_)]; |
| } __attribute__((packed)) lang0; |
| } __attribute__((packed)) strings = { |
| .header = { |
| .magic = cpu_to_le32(FUNCTIONFS_STRINGS_MAGIC), |
| .length = cpu_to_le32(sizeof(strings)), |
| .str_count = cpu_to_le32(1), |
| .lang_count = cpu_to_le32(1), |
| }, |
| .lang0 = { |
| cpu_to_le16(0x0409), /* en-us */ |
| STR_INTERFACE_, |
| }, |
| }; |
| |
| |
| |
| static void *usb_adb_open_thread(void *x) |
| { |
| struct usb_handle *usb = (struct usb_handle *)x; |
| int fd; |
| |
| while (1) { |
| // wait until the USB device needs opening |
| adb_mutex_lock(&usb->lock); |
| while (usb->fd != -1) |
| adb_cond_wait(&usb->notify, &usb->lock); |
| adb_mutex_unlock(&usb->lock); |
| |
| D("[ usb_thread - opening device ]\n"); |
| do { |
| /* XXX use inotify? */ |
| fd = unix_open("/dev/android_adb", O_RDWR); |
| if (fd < 0) { |
| // to support older kernels |
| fd = unix_open("/dev/android", O_RDWR); |
| } |
| if (fd < 0) { |
| adb_sleep_ms(1000); |
| } |
| } while (fd < 0); |
| D("[ opening device succeeded ]\n"); |
| |
| close_on_exec(fd); |
| usb->fd = fd; |
| |
| D("[ usb_thread - registering device ]\n"); |
| register_usb_transport(usb, 0, 0, 1); |
| } |
| |
| // never gets here |
| return 0; |
| } |
| |
| static int usb_adb_write(usb_handle *h, const void *data, int len) |
| { |
| int n; |
| |
| D("about to write (fd=%d, len=%d)\n", h->fd, len); |
| n = adb_write(h->fd, data, len); |
| if(n != len) { |
| D("ERROR: fd = %d, n = %d, errno = %d (%s)\n", |
| h->fd, n, errno, strerror(errno)); |
| return -1; |
| } |
| D("[ done fd=%d ]\n", h->fd); |
| return 0; |
| } |
| |
| static int usb_adb_read(usb_handle *h, void *data, int len) |
| { |
| int n; |
| |
| D("about to read (fd=%d, len=%d)\n", h->fd, len); |
| n = adb_read(h->fd, data, len); |
| if(n != len) { |
| D("ERROR: fd = %d, n = %d, errno = %d (%s)\n", |
| h->fd, n, errno, strerror(errno)); |
| return -1; |
| } |
| D("[ done fd=%d ]\n", h->fd); |
| return 0; |
| } |
| |
| static void usb_adb_kick(usb_handle *h) |
| { |
| D("usb_kick\n"); |
| adb_mutex_lock(&h->lock); |
| adb_close(h->fd); |
| h->fd = -1; |
| |
| // notify usb_adb_open_thread that we are disconnected |
| adb_cond_signal(&h->notify); |
| adb_mutex_unlock(&h->lock); |
| } |
| |
| static void usb_adb_init() |
| { |
| usb_handle *h; |
| adb_thread_t tid; |
| int fd; |
| |
| h = calloc(1, sizeof(usb_handle)); |
| |
| h->write = usb_adb_write; |
| h->read = usb_adb_read; |
| h->kick = usb_adb_kick; |
| h->fd = -1; |
| |
| adb_cond_init(&h->notify, 0); |
| adb_mutex_init(&h->lock, 0); |
| |
| // Open the file /dev/android_adb_enable to trigger |
| // the enabling of the adb USB function in the kernel. |
| // We never touch this file again - just leave it open |
| // indefinitely so the kernel will know when we are running |
| // and when we are not. |
| fd = unix_open("/dev/android_adb_enable", O_RDWR); |
| if (fd < 0) { |
| D("failed to open /dev/android_adb_enable\n"); |
| } else { |
| close_on_exec(fd); |
| } |
| |
| D("[ usb_init - starting thread ]\n"); |
| if(adb_thread_create(&tid, usb_adb_open_thread, h)){ |
| fatal_errno("cannot create usb thread"); |
| } |
| } |
| |
| |
| static void init_functionfs(struct usb_handle *h) |
| { |
| ssize_t ret; |
| struct desc_v1 v1_descriptor; |
| struct desc_v2 v2_descriptor; |
| |
| v2_descriptor.header.magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2); |
| v2_descriptor.header.length = cpu_to_le32(sizeof(v2_descriptor)); |
| v2_descriptor.header.flags = FUNCTIONFS_HAS_FS_DESC | FUNCTIONFS_HAS_HS_DESC; |
| v2_descriptor.fs_count = 3; |
| v2_descriptor.hs_count = 3; |
| v2_descriptor.fs_descs = fs_descriptors; |
| v2_descriptor.hs_descs = hs_descriptors; |
| |
| if (h->control < 0) { // might have already done this before |
| D("OPENING %s\n", USB_FFS_ADB_EP0); |
| h->control = adb_open(USB_FFS_ADB_EP0, O_RDWR); |
| if (h->control < 0) { |
| D("[ %s: cannot open control endpoint: errno=%d]\n", USB_FFS_ADB_EP0, errno); |
| goto err; |
| } |
| |
| ret = adb_write(h->control, &v2_descriptor, sizeof(v2_descriptor)); |
| if (ret < 0) { |
| v1_descriptor.header.magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC); |
| v1_descriptor.header.length = cpu_to_le32(sizeof(v1_descriptor)); |
| v1_descriptor.header.fs_count = 3; |
| v1_descriptor.header.hs_count = 3; |
| v1_descriptor.fs_descs = fs_descriptors; |
| v1_descriptor.hs_descs = hs_descriptors; |
| D("[ %s: Switching to V1_descriptor format errno=%d ]\n", USB_FFS_ADB_EP0, errno); |
| ret = adb_write(h->control, &v1_descriptor, sizeof(v1_descriptor)); |
| if (ret < 0) { |
| D("[ %s: write descriptors failed: errno=%d ]\n", USB_FFS_ADB_EP0, errno); |
| goto err; |
| } |
| } |
| |
| ret = adb_write(h->control, &strings, sizeof(strings)); |
| if (ret < 0) { |
| D("[ %s: writing strings failed: errno=%d]\n", USB_FFS_ADB_EP0, errno); |
| goto err; |
| } |
| } |
| |
| h->bulk_out = adb_open(USB_FFS_ADB_OUT, O_RDWR); |
| if (h->bulk_out < 0) { |
| D("[ %s: cannot open bulk-out ep: errno=%d ]\n", USB_FFS_ADB_OUT, errno); |
| goto err; |
| } |
| |
| h->bulk_in = adb_open(USB_FFS_ADB_IN, O_RDWR); |
| if (h->bulk_in < 0) { |
| D("[ %s: cannot open bulk-in ep: errno=%d ]\n", USB_FFS_ADB_IN, errno); |
| goto err; |
| } |
| |
| return; |
| |
| err: |
| if (h->bulk_in > 0) { |
| adb_close(h->bulk_in); |
| h->bulk_in = -1; |
| } |
| if (h->bulk_out > 0) { |
| adb_close(h->bulk_out); |
| h->bulk_out = -1; |
| } |
| if (h->control > 0) { |
| adb_close(h->control); |
| h->control = -1; |
| } |
| return; |
| } |
| |
| static void *usb_ffs_open_thread(void *x) |
| { |
| struct usb_handle *usb = (struct usb_handle *)x; |
| |
| while (1) { |
| // wait until the USB device needs opening |
| adb_mutex_lock(&usb->lock); |
| while (usb->control != -1 && usb->bulk_in != -1 && usb->bulk_out != -1) |
| adb_cond_wait(&usb->notify, &usb->lock); |
| adb_mutex_unlock(&usb->lock); |
| |
| while (1) { |
| init_functionfs(usb); |
| |
| if (usb->control >= 0 && usb->bulk_in >= 0 && usb->bulk_out >= 0) |
| break; |
| |
| adb_sleep_ms(1000); |
| } |
| |
| D("[ usb_thread - registering device ]\n"); |
| register_usb_transport(usb, 0, 0, 1); |
| } |
| |
| // never gets here |
| return 0; |
| } |
| |
| static int bulk_write(int bulk_in, const char *buf, size_t length) |
| { |
| size_t count = 0; |
| int ret; |
| |
| do { |
| ret = adb_write(bulk_in, buf + count, length - count); |
| if (ret < 0) { |
| if (errno != EINTR) |
| return ret; |
| } else { |
| count += ret; |
| } |
| } while (count < length); |
| |
| D("[ bulk_write done fd=%d ]\n", bulk_in); |
| return count; |
| } |
| |
| static int usb_ffs_write(usb_handle *h, const void *data, int len) |
| { |
| int n; |
| |
| D("about to write (fd=%d, len=%d)\n", h->bulk_in, len); |
| n = bulk_write(h->bulk_in, data, len); |
| if (n != len) { |
| D("ERROR: fd = %d, n = %d, errno = %d (%s)\n", |
| h->bulk_in, n, errno, strerror(errno)); |
| return -1; |
| } |
| D("[ done fd=%d ]\n", h->bulk_in); |
| return 0; |
| } |
| |
| static int bulk_read(int bulk_out, char *buf, size_t length) |
| { |
| size_t count = 0; |
| int ret; |
| |
| do { |
| ret = adb_read(bulk_out, buf + count, length - count); |
| if (ret < 0) { |
| if (errno != EINTR) { |
| D("[ bulk_read failed fd=%d length=%zu count=%zu ]\n", |
| bulk_out, length, count); |
| return ret; |
| } |
| } else { |
| count += ret; |
| } |
| } while (count < length); |
| |
| return count; |
| } |
| |
| static int usb_ffs_read(usb_handle *h, void *data, int len) |
| { |
| int n; |
| |
| D("about to read (fd=%d, len=%d)\n", h->bulk_out, len); |
| n = bulk_read(h->bulk_out, data, len); |
| if (n != len) { |
| D("ERROR: fd = %d, n = %d, errno = %d (%s)\n", |
| h->bulk_out, n, errno, strerror(errno)); |
| return -1; |
| } |
| D("[ done fd=%d ]\n", h->bulk_out); |
| return 0; |
| } |
| |
| static void usb_ffs_kick(usb_handle *h) |
| { |
| int err; |
| |
| err = ioctl(h->bulk_in, FUNCTIONFS_CLEAR_HALT); |
| if (err < 0) |
| D("[ kick: source (fd=%d) clear halt failed (%d) ]", h->bulk_in, errno); |
| |
| err = ioctl(h->bulk_out, FUNCTIONFS_CLEAR_HALT); |
| if (err < 0) |
| D("[ kick: sink (fd=%d) clear halt failed (%d) ]", h->bulk_out, errno); |
| |
| adb_mutex_lock(&h->lock); |
| |
| // don't close ep0 here, since we may not need to reinitialize it with |
| // the same descriptors again. if however ep1/ep2 fail to re-open in |
| // init_functionfs, only then would we close and open ep0 again. |
| adb_close(h->bulk_out); |
| adb_close(h->bulk_in); |
| h->bulk_out = h->bulk_in = -1; |
| |
| // notify usb_ffs_open_thread that we are disconnected |
| adb_cond_signal(&h->notify); |
| adb_mutex_unlock(&h->lock); |
| } |
| |
| static void usb_ffs_init() |
| { |
| usb_handle *h; |
| adb_thread_t tid; |
| |
| D("[ usb_init - using FunctionFS ]\n"); |
| |
| h = calloc(1, sizeof(usb_handle)); |
| |
| h->write = usb_ffs_write; |
| h->read = usb_ffs_read; |
| h->kick = usb_ffs_kick; |
| |
| h->control = -1; |
| h->bulk_out = -1; |
| h->bulk_out = -1; |
| |
| adb_cond_init(&h->notify, 0); |
| adb_mutex_init(&h->lock, 0); |
| |
| D("[ usb_init - starting thread ]\n"); |
| if (adb_thread_create(&tid, usb_ffs_open_thread, h)){ |
| fatal_errno("[ cannot create usb thread ]\n"); |
| } |
| } |
| |
| void usb_init() |
| { |
| if (access(USB_FFS_ADB_EP0, F_OK) == 0) |
| usb_ffs_init(); |
| else |
| usb_adb_init(); |
| } |
| |
| void usb_cleanup() |
| { |
| } |
| |
| int usb_write(usb_handle *h, const void *data, int len) |
| { |
| return h->write(h, data, len); |
| } |
| |
| int usb_read(usb_handle *h, void *data, int len) |
| { |
| return h->read(h, data, len); |
| } |
| int usb_close(usb_handle *h) |
| { |
| return 0; |
| } |
| |
| void usb_kick(usb_handle *h) |
| { |
| h->kick(h); |
| } |