| <?xml version="1.0" encoding="utf-8"?> |
| <!-- Copyright (C) 2009 The Android Open Source Project |
| |
| Licensed under the Apache License, Version 2.0 (the "License"); |
| you may not use this file except in compliance with the License. |
| You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| --> |
| |
| <!-- Phone app resources that may need to be customized |
| for different hardware or product builds. --> |
| <resources> |
| <!-- Flag indicating whether the Phone app should ignore |
| EVENT_SIM_NETWORK_LOCKED events from the Sim. If true, this will |
| prevent the IccNetworkDepersonalizationPanel from being shown, |
| and effectively disable the "Sim network lock" feature. --> |
| <bool name="ignore_sim_network_locked_events">false</bool> |
| |
| <!-- Flag indicating whether the Phone app should provide |
| a "Dismiss" button on the SIM network unlock screen. |
| The default value is true. |
| If set to false, there will be *no way* to dismiss the SIM |
| network unlock screen if you don't enter the correct unlock code. |
| (One important consequence: there will be no way to make an |
| Emergency Call if your SIM is network-locked and you don't know |
| the PIN.) --> |
| <bool name="sim_network_unlock_allow_dismiss">true</bool> |
| |
| <!-- OTA configuration values, used when provisioning CDMA devices. |
| Following defaults values of zero means OTA UI is completely disabled. |
| These OTA UI can be enabled by setting config value to one in the product |
| specific overlay file --> |
| |
| <!-- Determine whether we want to display the OTA activation screen, which |
| gives the user option to activate or cancel --> |
| <integer name="OtaShowActivationScreen">1</integer> |
| <!-- Determine whether we should show the "listen for instructions" screen after |
| successfully placing the OTA call --> |
| <integer name="OtaShowListeningScreen">0</integer> |
| <!-- The number of times we should show the activation screen/allow the provisioning |
| to fail before just showing an unsuccessful dialog --> |
| <integer name="OtaShowActivateFailTimes">0</integer> |
| <!-- Determine whether or not we should play the success/failure tone --> |
| <integer name="OtaPlaySuccessFailureTone">0</integer> |
| |
| <!-- Flag indicating if the phone is a world phone --> |
| <bool name="world_phone">false</bool> |
| |
| <!-- If true, enable vibration (haptic feedback) for key presses |
| in the EmergencyDialer activity. The pattern is set on a |
| per-platform basis using config_virtualKeyVibePattern. To be |
| consistent with the regular Dialer, this value should agree |
| with the corresponding values from config.xml under |
| apps/Contacts. --> |
| <bool name="config_enable_dialer_key_vibration">true</bool> |
| |
| <!-- Flag indicating if hac is enabled --> |
| <bool name="hac_enabled">false</bool> |
| |
| <!-- Flag indicating if dtmf tone type is enabled --> |
| <bool name="dtmf_type_enabled">false</bool> |
| |
| <!-- Flag indicating if auto retry is enabled --> |
| <bool name="auto_retry_enabled">false</bool> |
| |
| <!-- Determine whether we want to play local DTMF tones in a call, or |
| just let the radio/BP handle playing of the tones. --> |
| <bool name="allow_local_dtmf_tones">true</bool> |
| |
| <!-- If true, show an onscreen "Dial" button in the dialer. |
| In practice this is used on all platforms, even the ones with hard SEND/END |
| keys, but for maximum flexibility it's controlled by a flag here |
| (which can be overridden on a per-product basis.) --> |
| <bool name="config_show_onscreen_dial_button">true</bool> |
| |
| <!-- Determine whether calls to mute the microphone in PhoneUtils |
| are routed through the android.media.AudioManager class (true) or through |
| the com.android.internal.telephony.Phone interface (false). --> |
| <bool name="send_mic_mute_to_AudioManager">false</bool> |
| |
| <!-- Determines if device implements a noise suppression device for in call audio--> |
| <bool name="has_in_call_noise_suppression">false</bool> |
| |
| <!-- Determines if the current device should allow emergency numbers |
| to be logged in the Call Log. |
| (Some carriers require that emergency calls *not* be logged, |
| presumably to avoid the risk of accidental redialing from the |
| call log UI. This is a good idea, so the default here is false.) |
| |
| TODO: on the other hand, it might still be useful to have some |
| record of the emergency calls you've made, or to be able to look |
| up the exact date/time of an emergency call. So perhaps we |
| *should* log those calls, but instead fix the call log to disable |
| the "call" button for emergency numbers. --> |
| <bool name="allow_emergency_numbers_in_call_log">false</bool> |
| |
| <!-- If this is true, the SIM card (through Customer Service Profile EF file) will be |
| able to prevent manual operator selection. If false, this SIM setting will be |
| ignored and manual operator selection will always be available. See |
| CPHS4_2.WW6, CPHS B.4.7.1 for more information --> |
| <bool name="csp_enabled">false</bool> |
| |
| <!-- If true, removes the Voice Privacy option from Call Settings --> |
| <bool name="config_voice_privacy_disable">false</bool> |
| |
| <!-- Configure certain GsmUmtsOptions to be available or not. The |
| default values are in Phone/res/values/config.xml and maybe overridden |
| in operator specific resource directories or device specific overlays. --> |
| <bool name="config_apn_expand" translatable="false">true</bool> |
| <bool name="config_operator_selection_expand" translatable="false">true</bool> |
| <bool name="config_prefer_2g" translatable="false">true</bool> |
| <!-- Show enabled lte option for lte device --> |
| <bool name="config_enabled_lte" translatable="false">false</bool> |
| <!-- Show cdma auto network mode in (glabal) roaming --> |
| <bool name="config_show_cdma" translatable="false">false</bool> |
| |
| <!-- Package name for the default in-call UI and dialer [DO NOT TRANSLATE] --> |
| <string name="ui_default_package" translatable="false">com.android.dialer</string> |
| |
| <!-- Class name for the default main Dialer activity [DO NOT TRANSLATE] --> |
| <string name="dialer_default_class" translatable="false">com.android.dialer.DialtactsActivity</string> |
| |
| <!-- CDMA activation goes through HFA --> |
| <bool name="config_use_hfa_for_provisioning">false</bool> |
| |
| <!-- CDMA activation goes through OTASP. |
| TODO: This should be combined with config_use_hfa_for_provisioning and implemented |
| as an enum (NONE, HFA, OTASP). --> |
| <bool name="config_use_otasp_for_provisioning">false</bool> |
| |
| <!-- Display carrier settings menu if true --> |
| <bool name="config_carrier_settings_enable">false</bool> |
| <!-- carrier settings menu --> |
| <string name="carrier_settings" translatable="false"></string> |
| <string name="carrier_settings_menu" translatable="false"></string> |
| |
| <!-- Does not display additional call seting for IMS phone based on GSM Phone --> |
| <bool name="config_additional_call_setting">true</bool> |
| |
| <!-- Show APN Settings for some CDMA carriers --> |
| <bool name="config_show_apn_setting_cdma">false</bool> |
| </resources> |