diff --git a/common/framework/javac_extractor.jar b/common/framework/javac_extractor.jar
index 5344476..8574199 100644
--- a/common/framework/javac_extractor.jar
+++ b/common/framework/javac_extractor.jar
Binary files differ
diff --git a/common/framework/ktfmt.jar b/common/framework/ktfmt.jar
new file mode 100644
index 0000000..b6a830e
--- /dev/null
+++ b/common/framework/ktfmt.jar
Binary files differ
diff --git a/common/framework/turbine.jar b/common/framework/turbine.jar
index 9d4f925..3e5a54c 100644
--- a/common/framework/turbine.jar
+++ b/common/framework/turbine.jar
Binary files differ
diff --git a/darwin-x86/bin/acp b/darwin-x86/bin/acp
index d891a8e..0194c4e 100755
--- a/darwin-x86/bin/acp
+++ b/darwin-x86/bin/acp
Binary files differ
diff --git a/darwin-x86/bin/aidl b/darwin-x86/bin/aidl
index 4727524..c1619ac 100755
--- a/darwin-x86/bin/aidl
+++ b/darwin-x86/bin/aidl
Binary files differ
diff --git a/darwin-x86/bin/bison b/darwin-x86/bin/bison
index acadff2..cfb8b24 100755
--- a/darwin-x86/bin/bison
+++ b/darwin-x86/bin/bison
Binary files differ
diff --git a/darwin-x86/bin/bloaty b/darwin-x86/bin/bloaty
index 2bd6818..e27bf8f 100755
--- a/darwin-x86/bin/bloaty
+++ b/darwin-x86/bin/bloaty
Binary files differ
diff --git a/darwin-x86/bin/bpfmt b/darwin-x86/bin/bpfmt
index 7f81a0c..829ed2b 100755
--- a/darwin-x86/bin/bpfmt
+++ b/darwin-x86/bin/bpfmt
Binary files differ
diff --git a/darwin-x86/bin/brotli b/darwin-x86/bin/brotli
new file mode 100755
index 0000000..9d63156
--- /dev/null
+++ b/darwin-x86/bin/brotli
Binary files differ
diff --git a/darwin-x86/bin/bssl_inject_hash b/darwin-x86/bin/bssl_inject_hash
index fdc3593..6be7433 100755
--- a/darwin-x86/bin/bssl_inject_hash
+++ b/darwin-x86/bin/bssl_inject_hash
Binary files differ
diff --git a/darwin-x86/bin/bzip2 b/darwin-x86/bin/bzip2
index cc890b7..81b977d 100755
--- a/darwin-x86/bin/bzip2
+++ b/darwin-x86/bin/bzip2
Binary files differ
diff --git a/darwin-x86/bin/ckati b/darwin-x86/bin/ckati
index 7fb74fa..410fad1 100755
--- a/darwin-x86/bin/ckati
+++ b/darwin-x86/bin/ckati
Binary files differ
diff --git a/darwin-x86/bin/ckati_stamp_dump b/darwin-x86/bin/ckati_stamp_dump
index f9ff480..1cb6e61 100755
--- a/darwin-x86/bin/ckati_stamp_dump
+++ b/darwin-x86/bin/ckati_stamp_dump
Binary files differ
diff --git a/darwin-x86/bin/flex b/darwin-x86/bin/flex
index a0f6931..f2cc6e3 100755
--- a/darwin-x86/bin/flex
+++ b/darwin-x86/bin/flex
Binary files differ
diff --git a/darwin-x86/bin/gavinhoward-bc b/darwin-x86/bin/gavinhoward-bc
index b503581..e381e34 100755
--- a/darwin-x86/bin/gavinhoward-bc
+++ b/darwin-x86/bin/gavinhoward-bc
Binary files differ
diff --git a/darwin-x86/bin/go_extractor b/darwin-x86/bin/go_extractor
index 2fb241b..34775c8 100755
--- a/darwin-x86/bin/go_extractor
+++ b/darwin-x86/bin/go_extractor
Binary files differ
diff --git a/darwin-x86/bin/hidl-gen b/darwin-x86/bin/hidl-gen
index b4fdc44..d77be27 100755
--- a/darwin-x86/bin/hidl-gen
+++ b/darwin-x86/bin/hidl-gen
Binary files differ
diff --git a/darwin-x86/bin/hidl-lint b/darwin-x86/bin/hidl-lint
index 8452bf3..e0b1047 100755
--- a/darwin-x86/bin/hidl-lint
+++ b/darwin-x86/bin/hidl-lint
Binary files differ
diff --git a/darwin-x86/bin/m4 b/darwin-x86/bin/m4
index c812415..d98255d 100755
--- a/darwin-x86/bin/m4
+++ b/darwin-x86/bin/m4
Binary files differ
diff --git a/darwin-x86/bin/make b/darwin-x86/bin/make
index ca86fee..b4fff61 100755
--- a/darwin-x86/bin/make
+++ b/darwin-x86/bin/make
Binary files differ
diff --git a/darwin-x86/bin/merge_zips b/darwin-x86/bin/merge_zips
index 1b5aba7..b708955 100755
--- a/darwin-x86/bin/merge_zips
+++ b/darwin-x86/bin/merge_zips
Binary files differ
diff --git a/darwin-x86/bin/ninja b/darwin-x86/bin/ninja
index f002507..dfd78e5 100755
--- a/darwin-x86/bin/ninja
+++ b/darwin-x86/bin/ninja
Binary files differ
diff --git a/darwin-x86/bin/one-true-awk b/darwin-x86/bin/one-true-awk
index 2f2def1..3d64213 100755
--- a/darwin-x86/bin/one-true-awk
+++ b/darwin-x86/bin/one-true-awk
Binary files differ
diff --git a/darwin-x86/bin/openssl b/darwin-x86/bin/openssl
index e68304a..3e5ff26 100755
--- a/darwin-x86/bin/openssl
+++ b/darwin-x86/bin/openssl
Binary files differ
diff --git a/darwin-x86/bin/py2-cmd b/darwin-x86/bin/py2-cmd
deleted file mode 100755
index ec3092f..0000000
--- a/darwin-x86/bin/py2-cmd
+++ /dev/null
Binary files differ
diff --git a/darwin-x86/bin/py3-cmd b/darwin-x86/bin/py3-cmd
index 3272ffd..75bc147 100755
--- a/darwin-x86/bin/py3-cmd
+++ b/darwin-x86/bin/py3-cmd
Binary files differ
diff --git a/darwin-x86/bin/py3-launcher-autorun64 b/darwin-x86/bin/py3-launcher-autorun64
index 71af69b..61246f6 100755
--- a/darwin-x86/bin/py3-launcher-autorun64
+++ b/darwin-x86/bin/py3-launcher-autorun64
Binary files differ
diff --git a/darwin-x86/bin/py3-launcher64 b/darwin-x86/bin/py3-launcher64
index 1379592..d023720 100755
--- a/darwin-x86/bin/py3-launcher64
+++ b/darwin-x86/bin/py3-launcher64
Binary files differ
diff --git a/darwin-x86/bin/runextractor b/darwin-x86/bin/runextractor
index 8936d99..88b9541 100755
--- a/darwin-x86/bin/runextractor
+++ b/darwin-x86/bin/runextractor
Binary files differ
diff --git a/darwin-x86/bin/rust_extractor b/darwin-x86/bin/rust_extractor
new file mode 100755
index 0000000..8f39525
--- /dev/null
+++ b/darwin-x86/bin/rust_extractor
Binary files differ
diff --git a/darwin-x86/bin/soong_zip b/darwin-x86/bin/soong_zip
index 64c56a0..67ce6f1 100755
--- a/darwin-x86/bin/soong_zip
+++ b/darwin-x86/bin/soong_zip
Binary files differ
diff --git a/darwin-x86/bin/symbol_inject b/darwin-x86/bin/symbol_inject
index 966b303..2e267be 100755
--- a/darwin-x86/bin/symbol_inject
+++ b/darwin-x86/bin/symbol_inject
Binary files differ
diff --git a/darwin-x86/bin/toybox b/darwin-x86/bin/toybox
index 5b2eb3c..b390161 100755
--- a/darwin-x86/bin/toybox
+++ b/darwin-x86/bin/toybox
Binary files differ
diff --git a/darwin-x86/bin/xz b/darwin-x86/bin/xz
index e5f4df6..e94d5d3 100755
--- a/darwin-x86/bin/xz
+++ b/darwin-x86/bin/xz
Binary files differ
diff --git a/darwin-x86/bin/zip2zip b/darwin-x86/bin/zip2zip
index eea0fd8..1f78c5e 100755
--- a/darwin-x86/bin/zip2zip
+++ b/darwin-x86/bin/zip2zip
Binary files differ
diff --git a/darwin-x86/bin/zipalign b/darwin-x86/bin/zipalign
index 7cde13a..31df6dc 100755
--- a/darwin-x86/bin/zipalign
+++ b/darwin-x86/bin/zipalign
Binary files differ
diff --git a/darwin-x86/bin/ziptime b/darwin-x86/bin/ziptime
index fb62c95..119824e 100755
--- a/darwin-x86/bin/ziptime
+++ b/darwin-x86/bin/ziptime
Binary files differ
diff --git a/darwin-x86/bin/ziptool b/darwin-x86/bin/ziptool
index 21903d7..eb6844c 100755
--- a/darwin-x86/bin/ziptool
+++ b/darwin-x86/bin/ziptool
Binary files differ
diff --git a/darwin-x86/lib64/libbase.dylib b/darwin-x86/lib64/libbase.dylib
index 472034f..5625e93 100755
--- a/darwin-x86/lib64/libbase.dylib
+++ b/darwin-x86/lib64/libbase.dylib
Binary files differ
diff --git a/darwin-x86/lib64/libc++.dylib b/darwin-x86/lib64/libc++.dylib
index 345bdd1..832837b 100755
--- a/darwin-x86/lib64/libc++.dylib
+++ b/darwin-x86/lib64/libc++.dylib
Binary files differ
diff --git a/darwin-x86/lib64/libcrypto-host.dylib b/darwin-x86/lib64/libcrypto-host.dylib
index 6545040..b8e6f73 100755
--- a/darwin-x86/lib64/libcrypto-host.dylib
+++ b/darwin-x86/lib64/libcrypto-host.dylib
Binary files differ
diff --git a/darwin-x86/lib64/libicui18n-host.dylib b/darwin-x86/lib64/libicui18n-host.dylib
index de58921..df60712 100755
--- a/darwin-x86/lib64/libicui18n-host.dylib
+++ b/darwin-x86/lib64/libicui18n-host.dylib
Binary files differ
diff --git a/darwin-x86/lib64/libicuuc-host.dylib b/darwin-x86/lib64/libicuuc-host.dylib
index 3839a74..1de2744 100755
--- a/darwin-x86/lib64/libicuuc-host.dylib
+++ b/darwin-x86/lib64/libicuuc-host.dylib
Binary files differ
diff --git a/darwin-x86/lib64/liblog.dylib b/darwin-x86/lib64/liblog.dylib
index 520818c..38530ee 100755
--- a/darwin-x86/lib64/liblog.dylib
+++ b/darwin-x86/lib64/liblog.dylib
Binary files differ
diff --git a/darwin-x86/lib64/libsqlite.dylib b/darwin-x86/lib64/libsqlite.dylib
index 3560cc6..b0024d1 100755
--- a/darwin-x86/lib64/libsqlite.dylib
+++ b/darwin-x86/lib64/libsqlite.dylib
Binary files differ
diff --git a/darwin-x86/lib64/libz-host.dylib b/darwin-x86/lib64/libz-host.dylib
index d0448ad..b8dc2ea 100755
--- a/darwin-x86/lib64/libz-host.dylib
+++ b/darwin-x86/lib64/libz-host.dylib
Binary files differ
diff --git a/darwin-x86/lib64/libziparchive.dylib b/darwin-x86/lib64/libziparchive.dylib
index ab2bbd6..9681b0d 100755
--- a/darwin-x86/lib64/libziparchive.dylib
+++ b/darwin-x86/lib64/libziparchive.dylib
Binary files differ
diff --git a/linux-x86/asan/bin/acp b/linux-x86/asan/bin/acp
index 69e0ce2..17ca628 100755
--- a/linux-x86/asan/bin/acp
+++ b/linux-x86/asan/bin/acp
Binary files differ
diff --git a/linux-x86/asan/bin/aidl b/linux-x86/asan/bin/aidl
index 7f6554e..d7a5fa0 100755
--- a/linux-x86/asan/bin/aidl
+++ b/linux-x86/asan/bin/aidl
Binary files differ
diff --git a/linux-x86/asan/bin/ckati b/linux-x86/asan/bin/ckati
index 7fd3a33..161ccaa 100755
--- a/linux-x86/asan/bin/ckati
+++ b/linux-x86/asan/bin/ckati
Binary files differ
diff --git a/linux-x86/asan/bin/gavinhoward-bc b/linux-x86/asan/bin/gavinhoward-bc
index aab6c96..bcfb1de 100755
--- a/linux-x86/asan/bin/gavinhoward-bc
+++ b/linux-x86/asan/bin/gavinhoward-bc
Binary files differ
diff --git a/linux-x86/asan/bin/ninja b/linux-x86/asan/bin/ninja
index f9833db..5766aa2 100755
--- a/linux-x86/asan/bin/ninja
+++ b/linux-x86/asan/bin/ninja
Binary files differ
diff --git a/linux-x86/asan/bin/toybox b/linux-x86/asan/bin/toybox
index 5522cda..fc668ca 100755
--- a/linux-x86/asan/bin/toybox
+++ b/linux-x86/asan/bin/toybox
Binary files differ
diff --git a/linux-x86/asan/bin/zipalign b/linux-x86/asan/bin/zipalign
index baef64e..d206a42 100755
--- a/linux-x86/asan/bin/zipalign
+++ b/linux-x86/asan/bin/zipalign
Binary files differ
diff --git a/linux-x86/asan/bin/ziptime b/linux-x86/asan/bin/ziptime
index b2094bf..3b7d30a 100755
--- a/linux-x86/asan/bin/ziptime
+++ b/linux-x86/asan/bin/ziptime
Binary files differ
diff --git a/linux-x86/asan/bin/ziptool b/linux-x86/asan/bin/ziptool
index ec9e6ee..09611a6 100755
--- a/linux-x86/asan/bin/ziptool
+++ b/linux-x86/asan/bin/ziptool
Binary files differ
diff --git a/linux-x86/asan/lib64/libbase.so b/linux-x86/asan/lib64/libbase.so
index 49387b2..5f5669d 100755
--- a/linux-x86/asan/lib64/libbase.so
+++ b/linux-x86/asan/lib64/libbase.so
Binary files differ
diff --git a/linux-x86/asan/lib64/libc++.so b/linux-x86/asan/lib64/libc++.so
index cd48320..4755ffa 100755
--- a/linux-x86/asan/lib64/libc++.so
+++ b/linux-x86/asan/lib64/libc++.so
Binary files differ
diff --git a/linux-x86/asan/lib64/libcrypto-host.so b/linux-x86/asan/lib64/libcrypto-host.so
index f02c02b..227cf2d 100755
--- a/linux-x86/asan/lib64/libcrypto-host.so
+++ b/linux-x86/asan/lib64/libcrypto-host.so
Binary files differ
diff --git a/linux-x86/asan/lib64/libjemalloc5.so b/linux-x86/asan/lib64/libjemalloc5.so
index 19e7f04..4138c68 100755
--- a/linux-x86/asan/lib64/libjemalloc5.so
+++ b/linux-x86/asan/lib64/libjemalloc5.so
Binary files differ
diff --git a/linux-x86/asan/lib64/liblog.so b/linux-x86/asan/lib64/liblog.so
index 86bd5e4..363abb9 100755
--- a/linux-x86/asan/lib64/liblog.so
+++ b/linux-x86/asan/lib64/liblog.so
Binary files differ
diff --git a/linux-x86/asan/lib64/libz-host.so b/linux-x86/asan/lib64/libz-host.so
index a20bff9..c3b0188 100755
--- a/linux-x86/asan/lib64/libz-host.so
+++ b/linux-x86/asan/lib64/libz-host.so
Binary files differ
diff --git a/linux-x86/asan/lib64/libziparchive.so b/linux-x86/asan/lib64/libziparchive.so
index 74cc38a..f673168 100755
--- a/linux-x86/asan/lib64/libziparchive.so
+++ b/linux-x86/asan/lib64/libziparchive.so
Binary files differ
diff --git a/linux-x86/bin/acp b/linux-x86/bin/acp
index be8b230..5e9acff 100755
--- a/linux-x86/bin/acp
+++ b/linux-x86/bin/acp
Binary files differ
diff --git a/linux-x86/bin/aidl b/linux-x86/bin/aidl
index b83b03b..6d7b40e 100755
--- a/linux-x86/bin/aidl
+++ b/linux-x86/bin/aidl
Binary files differ
diff --git a/linux-x86/bin/bison b/linux-x86/bin/bison
index a6242cb..194e91e 100755
--- a/linux-x86/bin/bison
+++ b/linux-x86/bin/bison
Binary files differ
diff --git a/linux-x86/bin/bloaty b/linux-x86/bin/bloaty
index 10de301..b30e545 100755
--- a/linux-x86/bin/bloaty
+++ b/linux-x86/bin/bloaty
Binary files differ
diff --git a/linux-x86/bin/bpfmt b/linux-x86/bin/bpfmt
index c9f292e..735fae9 100755
--- a/linux-x86/bin/bpfmt
+++ b/linux-x86/bin/bpfmt
Binary files differ
diff --git a/linux-x86/bin/brotli b/linux-x86/bin/brotli
new file mode 100755
index 0000000..481f3b8
--- /dev/null
+++ b/linux-x86/bin/brotli
Binary files differ
diff --git a/linux-x86/bin/bssl_inject_hash b/linux-x86/bin/bssl_inject_hash
index 5493f20..0fce0df 100755
--- a/linux-x86/bin/bssl_inject_hash
+++ b/linux-x86/bin/bssl_inject_hash
Binary files differ
diff --git a/linux-x86/bin/bzip2 b/linux-x86/bin/bzip2
index b0f216e..3903dd6 100755
--- a/linux-x86/bin/bzip2
+++ b/linux-x86/bin/bzip2
Binary files differ
diff --git a/linux-x86/bin/ckati b/linux-x86/bin/ckati
index 48c08d2..22d4236 100755
--- a/linux-x86/bin/ckati
+++ b/linux-x86/bin/ckati
Binary files differ
diff --git a/linux-x86/bin/ckati_stamp_dump b/linux-x86/bin/ckati_stamp_dump
index 0d97177..8a02051 100755
--- a/linux-x86/bin/ckati_stamp_dump
+++ b/linux-x86/bin/ckati_stamp_dump
Binary files differ
diff --git a/linux-x86/bin/create_minidebuginfo b/linux-x86/bin/create_minidebuginfo
index 99dc10c..3f67505 100755
--- a/linux-x86/bin/create_minidebuginfo
+++ b/linux-x86/bin/create_minidebuginfo
Binary files differ
diff --git a/linux-x86/bin/flex b/linux-x86/bin/flex
index 0fafe34..560c65c 100755
--- a/linux-x86/bin/flex
+++ b/linux-x86/bin/flex
Binary files differ
diff --git a/linux-x86/bin/gavinhoward-bc b/linux-x86/bin/gavinhoward-bc
index 657fbf8..074535d 100755
--- a/linux-x86/bin/gavinhoward-bc
+++ b/linux-x86/bin/gavinhoward-bc
Binary files differ
diff --git a/linux-x86/bin/go_extractor b/linux-x86/bin/go_extractor
index c8d1902..5c29a60 100755
--- a/linux-x86/bin/go_extractor
+++ b/linux-x86/bin/go_extractor
Binary files differ
diff --git a/linux-x86/bin/hidl-gen b/linux-x86/bin/hidl-gen
index ae6816c..9054674 100755
--- a/linux-x86/bin/hidl-gen
+++ b/linux-x86/bin/hidl-gen
Binary files differ
diff --git a/linux-x86/bin/hidl-lint b/linux-x86/bin/hidl-lint
index b2044f8..c8b2001 100755
--- a/linux-x86/bin/hidl-lint
+++ b/linux-x86/bin/hidl-lint
Binary files differ
diff --git a/linux-x86/bin/m4 b/linux-x86/bin/m4
index 60b5f3c..cfb7fd4 100755
--- a/linux-x86/bin/m4
+++ b/linux-x86/bin/m4
Binary files differ
diff --git a/linux-x86/bin/make b/linux-x86/bin/make
index d7a0d6a..02c5cac 100755
--- a/linux-x86/bin/make
+++ b/linux-x86/bin/make
Binary files differ
diff --git a/linux-x86/bin/merge_zips b/linux-x86/bin/merge_zips
index 4d09265..5b99151 100755
--- a/linux-x86/bin/merge_zips
+++ b/linux-x86/bin/merge_zips
Binary files differ
diff --git a/linux-x86/bin/ninja b/linux-x86/bin/ninja
index f83ed92..300946d 100755
--- a/linux-x86/bin/ninja
+++ b/linux-x86/bin/ninja
Binary files differ
diff --git a/linux-x86/bin/nsjail b/linux-x86/bin/nsjail
index 990593b..d2be98b 100755
--- a/linux-x86/bin/nsjail
+++ b/linux-x86/bin/nsjail
Binary files differ
diff --git a/linux-x86/bin/one-true-awk b/linux-x86/bin/one-true-awk
index 8c52d40..621cf47 100755
--- a/linux-x86/bin/one-true-awk
+++ b/linux-x86/bin/one-true-awk
Binary files differ
diff --git a/linux-x86/bin/openssl b/linux-x86/bin/openssl
index 6f5b5b2..22948df 100755
--- a/linux-x86/bin/openssl
+++ b/linux-x86/bin/openssl
Binary files differ
diff --git a/linux-x86/bin/py2-cmd b/linux-x86/bin/py2-cmd
index 33d09db..477240e 100755
--- a/linux-x86/bin/py2-cmd
+++ b/linux-x86/bin/py2-cmd
Binary files differ
diff --git a/linux-x86/bin/py3-cmd b/linux-x86/bin/py3-cmd
index 53e21c4..c648475 100755
--- a/linux-x86/bin/py3-cmd
+++ b/linux-x86/bin/py3-cmd
Binary files differ
diff --git a/linux-x86/bin/py3-launcher-autorun64 b/linux-x86/bin/py3-launcher-autorun64
index 1a324f2..3185932 100755
--- a/linux-x86/bin/py3-launcher-autorun64
+++ b/linux-x86/bin/py3-launcher-autorun64
Binary files differ
diff --git a/linux-x86/bin/py3-launcher64 b/linux-x86/bin/py3-launcher64
index cb62b83..a8a615b 100755
--- a/linux-x86/bin/py3-launcher64
+++ b/linux-x86/bin/py3-launcher64
Binary files differ
diff --git a/linux-x86/bin/runextractor b/linux-x86/bin/runextractor
index 5850ada..4dc1061 100755
--- a/linux-x86/bin/runextractor
+++ b/linux-x86/bin/runextractor
Binary files differ
diff --git a/linux-x86/bin/rust_extractor b/linux-x86/bin/rust_extractor
new file mode 100755
index 0000000..65e0a14
--- /dev/null
+++ b/linux-x86/bin/rust_extractor
Binary files differ
diff --git a/linux-x86/bin/soong_zip b/linux-x86/bin/soong_zip
index e202b38..1c7b986 100755
--- a/linux-x86/bin/soong_zip
+++ b/linux-x86/bin/soong_zip
Binary files differ
diff --git a/linux-x86/bin/symbol_inject b/linux-x86/bin/symbol_inject
index 4238396..7b8e7f7 100755
--- a/linux-x86/bin/symbol_inject
+++ b/linux-x86/bin/symbol_inject
Binary files differ
diff --git a/linux-x86/bin/toybox b/linux-x86/bin/toybox
index 1c34b73..56fc213 100755
--- a/linux-x86/bin/toybox
+++ b/linux-x86/bin/toybox
Binary files differ
diff --git a/linux-x86/bin/xz b/linux-x86/bin/xz
index d71e3c5..84c5e3d 100755
--- a/linux-x86/bin/xz
+++ b/linux-x86/bin/xz
Binary files differ
diff --git a/linux-x86/bin/zip2zip b/linux-x86/bin/zip2zip
index 6b96081..3c7af0c 100755
--- a/linux-x86/bin/zip2zip
+++ b/linux-x86/bin/zip2zip
Binary files differ
diff --git a/linux-x86/bin/zipalign b/linux-x86/bin/zipalign
index 7deaa45..6e36eaa 100755
--- a/linux-x86/bin/zipalign
+++ b/linux-x86/bin/zipalign
Binary files differ
diff --git a/linux-x86/bin/ziptime b/linux-x86/bin/ziptime
index 08a3b23..dd19d29 100755
--- a/linux-x86/bin/ziptime
+++ b/linux-x86/bin/ziptime
Binary files differ
diff --git a/linux-x86/bin/ziptool b/linux-x86/bin/ziptool
index e9b2e8a..5b3b43d 100755
--- a/linux-x86/bin/ziptool
+++ b/linux-x86/bin/ziptool
Binary files differ
diff --git a/linux-x86/lib64/libbase.so b/linux-x86/lib64/libbase.so
index 6b7af65..ce7bebe 100755
--- a/linux-x86/lib64/libbase.so
+++ b/linux-x86/lib64/libbase.so
Binary files differ
diff --git a/linux-x86/lib64/libc++.so b/linux-x86/lib64/libc++.so
index e22c3b1..b230fb1 100755
--- a/linux-x86/lib64/libc++.so
+++ b/linux-x86/lib64/libc++.so
Binary files differ
diff --git a/linux-x86/lib64/libcrypto-host.so b/linux-x86/lib64/libcrypto-host.so
index 68db0b3..f31be1e 100755
--- a/linux-x86/lib64/libcrypto-host.so
+++ b/linux-x86/lib64/libcrypto-host.so
Binary files differ
diff --git a/linux-x86/lib64/libicui18n-host.so b/linux-x86/lib64/libicui18n-host.so
index cc89f7a..46ed2e7 100755
--- a/linux-x86/lib64/libicui18n-host.so
+++ b/linux-x86/lib64/libicui18n-host.so
Binary files differ
diff --git a/linux-x86/lib64/libicuuc-host.so b/linux-x86/lib64/libicuuc-host.so
index 278cef3..c7033ee 100755
--- a/linux-x86/lib64/libicuuc-host.so
+++ b/linux-x86/lib64/libicuuc-host.so
Binary files differ
diff --git a/linux-x86/lib64/libjemalloc5.so b/linux-x86/lib64/libjemalloc5.so
index 3697338..f28c64c 100755
--- a/linux-x86/lib64/libjemalloc5.so
+++ b/linux-x86/lib64/libjemalloc5.so
Binary files differ
diff --git a/linux-x86/lib64/liblog.so b/linux-x86/lib64/liblog.so
index fd8498a..abebb9d 100755
--- a/linux-x86/lib64/liblog.so
+++ b/linux-x86/lib64/liblog.so
Binary files differ
diff --git a/linux-x86/lib64/libnl.so b/linux-x86/lib64/libnl.so
index 7c73cc6..10ffaaa 100755
--- a/linux-x86/lib64/libnl.so
+++ b/linux-x86/lib64/libnl.so
Binary files differ
diff --git a/linux-x86/lib64/libprotobuf-cpp-full.so b/linux-x86/lib64/libprotobuf-cpp-full.so
index b693784..ea78d2e 100755
--- a/linux-x86/lib64/libprotobuf-cpp-full.so
+++ b/linux-x86/lib64/libprotobuf-cpp-full.so
Binary files differ
diff --git a/linux-x86/lib64/libsqlite.so b/linux-x86/lib64/libsqlite.so
index 3fae08e..601d071 100755
--- a/linux-x86/lib64/libsqlite.so
+++ b/linux-x86/lib64/libsqlite.so
Binary files differ
diff --git a/linux-x86/lib64/libz-host.so b/linux-x86/lib64/libz-host.so
index e29e1ec..4385124 100755
--- a/linux-x86/lib64/libz-host.so
+++ b/linux-x86/lib64/libz-host.so
Binary files differ
diff --git a/linux-x86/lib64/libziparchive.so b/linux-x86/lib64/libziparchive.so
index bd1ffeb..80027c6 100755
--- a/linux-x86/lib64/libziparchive.so
+++ b/linux-x86/lib64/libziparchive.so
Binary files differ
diff --git a/linux_musl-x86/asan/bin/acp b/linux_musl-x86/asan/bin/acp
index 69e0ce2..17ca628 100755
--- a/linux_musl-x86/asan/bin/acp
+++ b/linux_musl-x86/asan/bin/acp
Binary files differ
diff --git a/linux_musl-x86/asan/bin/aidl b/linux_musl-x86/asan/bin/aidl
index 7f6554e..d7a5fa0 100755
--- a/linux_musl-x86/asan/bin/aidl
+++ b/linux_musl-x86/asan/bin/aidl
Binary files differ
diff --git a/linux_musl-x86/asan/bin/ckati b/linux_musl-x86/asan/bin/ckati
index 7fd3a33..161ccaa 100755
--- a/linux_musl-x86/asan/bin/ckati
+++ b/linux_musl-x86/asan/bin/ckati
Binary files differ
diff --git a/linux_musl-x86/asan/bin/gavinhoward-bc b/linux_musl-x86/asan/bin/gavinhoward-bc
index aab6c96..bcfb1de 100755
--- a/linux_musl-x86/asan/bin/gavinhoward-bc
+++ b/linux_musl-x86/asan/bin/gavinhoward-bc
Binary files differ
diff --git a/linux_musl-x86/asan/bin/ninja b/linux_musl-x86/asan/bin/ninja
index f9833db..5766aa2 100755
--- a/linux_musl-x86/asan/bin/ninja
+++ b/linux_musl-x86/asan/bin/ninja
Binary files differ
diff --git a/linux_musl-x86/asan/bin/toybox b/linux_musl-x86/asan/bin/toybox
index 5522cda..fc668ca 100755
--- a/linux_musl-x86/asan/bin/toybox
+++ b/linux_musl-x86/asan/bin/toybox
Binary files differ
diff --git a/linux_musl-x86/asan/bin/zipalign b/linux_musl-x86/asan/bin/zipalign
index baef64e..d206a42 100755
--- a/linux_musl-x86/asan/bin/zipalign
+++ b/linux_musl-x86/asan/bin/zipalign
Binary files differ
diff --git a/linux_musl-x86/asan/bin/ziptime b/linux_musl-x86/asan/bin/ziptime
index b2094bf..3b7d30a 100755
--- a/linux_musl-x86/asan/bin/ziptime
+++ b/linux_musl-x86/asan/bin/ziptime
Binary files differ
diff --git a/linux_musl-x86/asan/bin/ziptool b/linux_musl-x86/asan/bin/ziptool
index ec9e6ee..09611a6 100755
--- a/linux_musl-x86/asan/bin/ziptool
+++ b/linux_musl-x86/asan/bin/ziptool
Binary files differ
diff --git a/linux_musl-x86/asan/lib64/libbase.so b/linux_musl-x86/asan/lib64/libbase.so
index 49387b2..5f5669d 100755
--- a/linux_musl-x86/asan/lib64/libbase.so
+++ b/linux_musl-x86/asan/lib64/libbase.so
Binary files differ
diff --git a/linux_musl-x86/asan/lib64/libc++.so b/linux_musl-x86/asan/lib64/libc++.so
index cd48320..4755ffa 100755
--- a/linux_musl-x86/asan/lib64/libc++.so
+++ b/linux_musl-x86/asan/lib64/libc++.so
Binary files differ
diff --git a/linux_musl-x86/asan/lib64/libcrypto-host.so b/linux_musl-x86/asan/lib64/libcrypto-host.so
index f02c02b..227cf2d 100755
--- a/linux_musl-x86/asan/lib64/libcrypto-host.so
+++ b/linux_musl-x86/asan/lib64/libcrypto-host.so
Binary files differ
diff --git a/linux_musl-x86/asan/lib64/libjemalloc5.so b/linux_musl-x86/asan/lib64/libjemalloc5.so
index 19e7f04..4138c68 100755
--- a/linux_musl-x86/asan/lib64/libjemalloc5.so
+++ b/linux_musl-x86/asan/lib64/libjemalloc5.so
Binary files differ
diff --git a/linux_musl-x86/asan/lib64/liblog.so b/linux_musl-x86/asan/lib64/liblog.so
index 86bd5e4..363abb9 100755
--- a/linux_musl-x86/asan/lib64/liblog.so
+++ b/linux_musl-x86/asan/lib64/liblog.so
Binary files differ
diff --git a/linux_musl-x86/asan/lib64/libz-host.so b/linux_musl-x86/asan/lib64/libz-host.so
index a20bff9..c3b0188 100755
--- a/linux_musl-x86/asan/lib64/libz-host.so
+++ b/linux_musl-x86/asan/lib64/libz-host.so
Binary files differ
diff --git a/linux_musl-x86/asan/lib64/libziparchive.so b/linux_musl-x86/asan/lib64/libziparchive.so
index 74cc38a..f673168 100755
--- a/linux_musl-x86/asan/lib64/libziparchive.so
+++ b/linux_musl-x86/asan/lib64/libziparchive.so
Binary files differ
diff --git a/linux_musl-x86/bin/acp b/linux_musl-x86/bin/acp
index 7d32a42..e9cdc86 100755
--- a/linux_musl-x86/bin/acp
+++ b/linux_musl-x86/bin/acp
Binary files differ
diff --git a/linux_musl-x86/bin/aidl b/linux_musl-x86/bin/aidl
index 824b78c..42f29a2 100755
--- a/linux_musl-x86/bin/aidl
+++ b/linux_musl-x86/bin/aidl
Binary files differ
diff --git a/linux_musl-x86/bin/bison b/linux_musl-x86/bin/bison
index 314016a..e681bea 100755
--- a/linux_musl-x86/bin/bison
+++ b/linux_musl-x86/bin/bison
Binary files differ
diff --git a/linux_musl-x86/bin/bloaty b/linux_musl-x86/bin/bloaty
index 4494f94..5b6d447 100755
--- a/linux_musl-x86/bin/bloaty
+++ b/linux_musl-x86/bin/bloaty
Binary files differ
diff --git a/linux_musl-x86/bin/bpfmt b/linux_musl-x86/bin/bpfmt
index c9f292e..735fae9 100755
--- a/linux_musl-x86/bin/bpfmt
+++ b/linux_musl-x86/bin/bpfmt
Binary files differ
diff --git a/linux_musl-x86/bin/brotli b/linux_musl-x86/bin/brotli
new file mode 100755
index 0000000..137e679
--- /dev/null
+++ b/linux_musl-x86/bin/brotli
Binary files differ
diff --git a/linux_musl-x86/bin/bssl_inject_hash b/linux_musl-x86/bin/bssl_inject_hash
index 5493f20..0fce0df 100755
--- a/linux_musl-x86/bin/bssl_inject_hash
+++ b/linux_musl-x86/bin/bssl_inject_hash
Binary files differ
diff --git a/linux_musl-x86/bin/bzip2 b/linux_musl-x86/bin/bzip2
index 6d3480b..8356ee6 100755
--- a/linux_musl-x86/bin/bzip2
+++ b/linux_musl-x86/bin/bzip2
Binary files differ
diff --git a/linux_musl-x86/bin/ckati b/linux_musl-x86/bin/ckati
index 58726da..ae61517 100755
--- a/linux_musl-x86/bin/ckati
+++ b/linux_musl-x86/bin/ckati
Binary files differ
diff --git a/linux_musl-x86/bin/ckati_stamp_dump b/linux_musl-x86/bin/ckati_stamp_dump
index e9b4621..98e6608 100755
--- a/linux_musl-x86/bin/ckati_stamp_dump
+++ b/linux_musl-x86/bin/ckati_stamp_dump
Binary files differ
diff --git a/linux_musl-x86/bin/create_minidebuginfo b/linux_musl-x86/bin/create_minidebuginfo
index a79bc8c..10d4e48 100755
--- a/linux_musl-x86/bin/create_minidebuginfo
+++ b/linux_musl-x86/bin/create_minidebuginfo
Binary files differ
diff --git a/linux_musl-x86/bin/flex b/linux_musl-x86/bin/flex
index f17c128..b38ca8c 100755
--- a/linux_musl-x86/bin/flex
+++ b/linux_musl-x86/bin/flex
Binary files differ
diff --git a/linux_musl-x86/bin/gavinhoward-bc b/linux_musl-x86/bin/gavinhoward-bc
index 811f5fd..769f67f 100755
--- a/linux_musl-x86/bin/gavinhoward-bc
+++ b/linux_musl-x86/bin/gavinhoward-bc
Binary files differ
diff --git a/linux_musl-x86/bin/go_extractor b/linux_musl-x86/bin/go_extractor
index c8d1902..5c29a60 100755
--- a/linux_musl-x86/bin/go_extractor
+++ b/linux_musl-x86/bin/go_extractor
Binary files differ
diff --git a/linux_musl-x86/bin/hidl-gen b/linux_musl-x86/bin/hidl-gen
index b79c462..e58f79c 100755
--- a/linux_musl-x86/bin/hidl-gen
+++ b/linux_musl-x86/bin/hidl-gen
Binary files differ
diff --git a/linux_musl-x86/bin/hidl-lint b/linux_musl-x86/bin/hidl-lint
index 13d81d8..c6010ab 100755
--- a/linux_musl-x86/bin/hidl-lint
+++ b/linux_musl-x86/bin/hidl-lint
Binary files differ
diff --git a/linux_musl-x86/bin/m4 b/linux_musl-x86/bin/m4
index 30a0921..ac100f3 100755
--- a/linux_musl-x86/bin/m4
+++ b/linux_musl-x86/bin/m4
Binary files differ
diff --git a/linux_musl-x86/bin/make b/linux_musl-x86/bin/make
index 74f9d26..e288978 100755
--- a/linux_musl-x86/bin/make
+++ b/linux_musl-x86/bin/make
Binary files differ
diff --git a/linux_musl-x86/bin/merge_zips b/linux_musl-x86/bin/merge_zips
index 4d09265..5b99151 100755
--- a/linux_musl-x86/bin/merge_zips
+++ b/linux_musl-x86/bin/merge_zips
Binary files differ
diff --git a/linux_musl-x86/bin/ninja b/linux_musl-x86/bin/ninja
index cad8c09..a259522 100755
--- a/linux_musl-x86/bin/ninja
+++ b/linux_musl-x86/bin/ninja
Binary files differ
diff --git a/linux_musl-x86/bin/nsjail b/linux_musl-x86/bin/nsjail
index 1c0242a..a70fb0c 100755
--- a/linux_musl-x86/bin/nsjail
+++ b/linux_musl-x86/bin/nsjail
Binary files differ
diff --git a/linux_musl-x86/bin/one-true-awk b/linux_musl-x86/bin/one-true-awk
index 89b0405..a02fd58 100755
--- a/linux_musl-x86/bin/one-true-awk
+++ b/linux_musl-x86/bin/one-true-awk
Binary files differ
diff --git a/linux_musl-x86/bin/openssl b/linux_musl-x86/bin/openssl
index 84e59d9..7c58ffd 100755
--- a/linux_musl-x86/bin/openssl
+++ b/linux_musl-x86/bin/openssl
Binary files differ
diff --git a/linux_musl-x86/bin/py2-cmd b/linux_musl-x86/bin/py2-cmd
index fbb02ea..d53f913 100755
--- a/linux_musl-x86/bin/py2-cmd
+++ b/linux_musl-x86/bin/py2-cmd
Binary files differ
diff --git a/linux_musl-x86/bin/py3-cmd b/linux_musl-x86/bin/py3-cmd
index 8ed8473..1a36335 100755
--- a/linux_musl-x86/bin/py3-cmd
+++ b/linux_musl-x86/bin/py3-cmd
Binary files differ
diff --git a/linux_musl-x86/bin/py3-launcher-autorun-static64 b/linux_musl-x86/bin/py3-launcher-autorun-static64
index 5afaa77..45a5e38 100755
--- a/linux_musl-x86/bin/py3-launcher-autorun-static64
+++ b/linux_musl-x86/bin/py3-launcher-autorun-static64
Binary files differ
diff --git a/linux_musl-x86/bin/py3-launcher-autorun64 b/linux_musl-x86/bin/py3-launcher-autorun64
index 4b465c5..4c7a6a3 100755
--- a/linux_musl-x86/bin/py3-launcher-autorun64
+++ b/linux_musl-x86/bin/py3-launcher-autorun64
Binary files differ
diff --git a/linux_musl-x86/bin/py3-launcher-static64 b/linux_musl-x86/bin/py3-launcher-static64
index 6c443e6..fd0fdd5 100755
--- a/linux_musl-x86/bin/py3-launcher-static64
+++ b/linux_musl-x86/bin/py3-launcher-static64
Binary files differ
diff --git a/linux_musl-x86/bin/py3-launcher64 b/linux_musl-x86/bin/py3-launcher64
index 351fc1b..24f25b9 100755
--- a/linux_musl-x86/bin/py3-launcher64
+++ b/linux_musl-x86/bin/py3-launcher64
Binary files differ
diff --git a/linux_musl-x86/bin/runextractor b/linux_musl-x86/bin/runextractor
index 5850ada..4dc1061 100755
--- a/linux_musl-x86/bin/runextractor
+++ b/linux_musl-x86/bin/runextractor
Binary files differ
diff --git a/linux_musl-x86/bin/rust_extractor b/linux_musl-x86/bin/rust_extractor
new file mode 100755
index 0000000..65e0a14
--- /dev/null
+++ b/linux_musl-x86/bin/rust_extractor
Binary files differ
diff --git a/linux_musl-x86/bin/soong_zip b/linux_musl-x86/bin/soong_zip
index e202b38..1c7b986 100755
--- a/linux_musl-x86/bin/soong_zip
+++ b/linux_musl-x86/bin/soong_zip
Binary files differ
diff --git a/linux_musl-x86/bin/symbol_inject b/linux_musl-x86/bin/symbol_inject
index 4238396..7b8e7f7 100755
--- a/linux_musl-x86/bin/symbol_inject
+++ b/linux_musl-x86/bin/symbol_inject
Binary files differ
diff --git a/linux_musl-x86/bin/toybox b/linux_musl-x86/bin/toybox
index fc56e15..e15ce06 100755
--- a/linux_musl-x86/bin/toybox
+++ b/linux_musl-x86/bin/toybox
Binary files differ
diff --git a/linux_musl-x86/bin/xz b/linux_musl-x86/bin/xz
index 0cebd19..fcffb1a 100755
--- a/linux_musl-x86/bin/xz
+++ b/linux_musl-x86/bin/xz
Binary files differ
diff --git a/linux_musl-x86/bin/zip2zip b/linux_musl-x86/bin/zip2zip
index 6b96081..3c7af0c 100755
--- a/linux_musl-x86/bin/zip2zip
+++ b/linux_musl-x86/bin/zip2zip
Binary files differ
diff --git a/linux_musl-x86/bin/zipalign b/linux_musl-x86/bin/zipalign
index 499011c..747ce46 100755
--- a/linux_musl-x86/bin/zipalign
+++ b/linux_musl-x86/bin/zipalign
Binary files differ
diff --git a/linux_musl-x86/bin/ziptime b/linux_musl-x86/bin/ziptime
index 2256adb..327802f 100755
--- a/linux_musl-x86/bin/ziptime
+++ b/linux_musl-x86/bin/ziptime
Binary files differ
diff --git a/linux_musl-x86/bin/ziptool b/linux_musl-x86/bin/ziptool
index ef9d14a..9661b89 100755
--- a/linux_musl-x86/bin/ziptool
+++ b/linux_musl-x86/bin/ziptool
Binary files differ
diff --git a/linux_musl-x86/lib64/libbase.so b/linux_musl-x86/lib64/libbase.so
index c1acbe1..3922726 100755
--- a/linux_musl-x86/lib64/libbase.so
+++ b/linux_musl-x86/lib64/libbase.so
Binary files differ
diff --git a/linux_musl-x86/lib64/libc++.so b/linux_musl-x86/lib64/libc++.so
index b5eac52..3f247d9 100755
--- a/linux_musl-x86/lib64/libc++.so
+++ b/linux_musl-x86/lib64/libc++.so
Binary files differ
diff --git a/linux_musl-x86/lib64/libc_musl.so b/linux_musl-x86/lib64/libc_musl.so
index 113c4ad..2ebf854 100755
--- a/linux_musl-x86/lib64/libc_musl.so
+++ b/linux_musl-x86/lib64/libc_musl.so
Binary files differ
diff --git a/linux_musl-x86/lib64/libclang_rt.ubsan_standalone-x86_64.so b/linux_musl-x86/lib64/libclang_rt.ubsan_standalone-x86_64.so
index f509763..befc23a 100644
--- a/linux_musl-x86/lib64/libclang_rt.ubsan_standalone-x86_64.so
+++ b/linux_musl-x86/lib64/libclang_rt.ubsan_standalone-x86_64.so
Binary files differ
diff --git a/linux_musl-x86/lib64/libcrypto-host.so b/linux_musl-x86/lib64/libcrypto-host.so
index adba547..e30501a 100755
--- a/linux_musl-x86/lib64/libcrypto-host.so
+++ b/linux_musl-x86/lib64/libcrypto-host.so
Binary files differ
diff --git a/linux_musl-x86/lib64/libicui18n-host.so b/linux_musl-x86/lib64/libicui18n-host.so
index d090557..f9dc8af 100755
--- a/linux_musl-x86/lib64/libicui18n-host.so
+++ b/linux_musl-x86/lib64/libicui18n-host.so
Binary files differ
diff --git a/linux_musl-x86/lib64/libicuuc-host.so b/linux_musl-x86/lib64/libicuuc-host.so
index 8a00535..5f96e0e 100755
--- a/linux_musl-x86/lib64/libicuuc-host.so
+++ b/linux_musl-x86/lib64/libicuuc-host.so
Binary files differ
diff --git a/linux_musl-x86/lib64/libjemalloc5.so b/linux_musl-x86/lib64/libjemalloc5.so
deleted file mode 100755
index 280ae8e..0000000
--- a/linux_musl-x86/lib64/libjemalloc5.so
+++ /dev/null
Binary files differ
diff --git a/linux_musl-x86/lib64/liblog.so b/linux_musl-x86/lib64/liblog.so
index f233d02..fad1ba1 100755
--- a/linux_musl-x86/lib64/liblog.so
+++ b/linux_musl-x86/lib64/liblog.so
Binary files differ
diff --git a/linux_musl-x86/lib64/libnl.so b/linux_musl-x86/lib64/libnl.so
index 4ca0795..9ef7d13 100755
--- a/linux_musl-x86/lib64/libnl.so
+++ b/linux_musl-x86/lib64/libnl.so
Binary files differ
diff --git a/linux_musl-x86/lib64/libprotobuf-cpp-full.so b/linux_musl-x86/lib64/libprotobuf-cpp-full.so
index e95ccc4..aa6df77 100755
--- a/linux_musl-x86/lib64/libprotobuf-cpp-full.so
+++ b/linux_musl-x86/lib64/libprotobuf-cpp-full.so
Binary files differ
diff --git a/linux_musl-x86/lib64/libsqlite.so b/linux_musl-x86/lib64/libsqlite.so
index f3477ad..c737a67 100755
--- a/linux_musl-x86/lib64/libsqlite.so
+++ b/linux_musl-x86/lib64/libsqlite.so
Binary files differ
diff --git a/linux_musl-x86/lib64/libz-host.so b/linux_musl-x86/lib64/libz-host.so
index 7732607..77cfbf4 100755
--- a/linux_musl-x86/lib64/libz-host.so
+++ b/linux_musl-x86/lib64/libz-host.so
Binary files differ
diff --git a/linux_musl-x86/lib64/libziparchive.so b/linux_musl-x86/lib64/libziparchive.so
index 003fb8f..54fcd09 100755
--- a/linux_musl-x86/lib64/libziparchive.so
+++ b/linux_musl-x86/lib64/libziparchive.so
Binary files differ
diff --git a/manifest.xml b/manifest.xml
index 3431e49..f860ba1 100644
--- a/manifest.xml
+++ b/manifest.xml
@@ -1,221 +1,233 @@
 <?xml version='1.0' encoding='UTF-8'?>
 
 <manifest>
-  <remote fetch="https://android.googlesource.com/" name="aosp" review="https://android.googlesource.com/" />
+  <remote name="aosp" fetch="https://android.googlesource.com/" review="https://android.googlesource.com/" />
 
-  <default remote="aosp" revision="build-tools-release" sync-j="4" />
+  <default revision="build-tools-release" remote="aosp" sync-j="4" />
 
-  <project name="platform/build" path="build/make" revision="cadeaee25b5a011fca9798bb2291830e046db48f" upstream="build-tools-release">
+  <project path="build/make" name="platform/build" revision="a33ff04983f6df934a186b700c7861ee22238e99" upstream="build-tools-release">
     <linkfile dest="build/tools" src="tools" />
 </project>
 
-  <project name="platform/build/blueprint" path="build/blueprint" revision="8c59bccaf2bf9588bb6c73ab4db6da201f1e3e8d" upstream="build-tools-release" />
+  <project path="build/blueprint" name="platform/build/blueprint" revision="96915b036d37d6f047e845ca5190cfe118408ed5" upstream="build-tools-release" />
 
-  <project name="platform/build/soong" path="build/soong" revision="b70001f468f398a5c70285ed69161072b441c88f" upstream="build-tools-release">
+  <project path="build/soong" name="platform/build/soong" revision="d5bdea3cb931aa76bd93b6bdde64f69c93139378" upstream="build-tools-release">
     <linkfile dest="Android.bp" src="root.bp" />
 
     <linkfile dest="bootstrap.bash" src="bootstrap.bash" />
 </project>
 
-  <project name="platform/external/golang-protobuf" path="external/golang-protobuf" revision="eb5d78d10d73c678a091d42b6aef043b40a09d8a" upstream="build-tools-release" />
+  <project path="external/golang-protobuf" name="platform/external/golang-protobuf" revision="0d884c869b892fc0095ffb51865395ddc9638590" upstream="build-tools-release" />
 
-  <project clone-depth="1" name="platform/prebuilts/build-tools" path="prebuilts/build-tools" revision="0e437a690017f5a52d3105c15f071b9286aef7a4" upstream="build-tools-release" />
+  <project path="prebuilts/build-tools" name="platform/prebuilts/build-tools" clone-depth="1" revision="aba8fdb54fe051073daeb4d7e6066b649dad5fe0" upstream="build-tools-release" />
 
-  <project clone-depth="1" groups="pdk" name="platform/prebuilts/remoteexecution-client" path="prebuilts/remoteexecution-client" revision="4cc7e61a95415d2f5e6ed2247c39c7c9dc54b46a" upstream="build-tools-release" />
+  <project path="prebuilts/remoteexecution-client" name="platform/prebuilts/remoteexecution-client" groups="pdk" clone-depth="1" revision="92dadabe0dad85a3e1b66c0e89aa808dc18fc986" upstream="build-tools-release" />
 
-  <project clone-depth="1" groups="linux" name="platform/prebuilts/clang/host/linux-x86" path="prebuilts/clang/host/linux-x86" revision="f7adefc90364180e268930602628c55246ec7f98" upstream="build-tools-release" />
+  <project path="prebuilts/clang/host/linux-x86" name="platform/prebuilts/clang/host/linux-x86" groups="linux" clone-depth="1" revision="2db4736e1e185a2bb7e7dd100e56ddd70dcb6df0" upstream="build-tools-release" />
 
-  <project clone-depth="1" name="platform/prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.15-4.8" path="prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.15-4.8" revision="7454fb3d3249c268b7e61a6551e4a17dfd031ea9" upstream="build-tools-release" />
+  <project path="prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.15-4.8" name="platform/prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.15-4.8" clone-depth="1" revision="7454fb3d3249c268b7e61a6551e4a17dfd031ea9" upstream="build-tools-release" />
 
-  <project clone-depth="1" name="platform/prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.17-4.8" path="prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.17-4.8" revision="b3dee9cce205c149dd0a0bfcf47946552ce91b54" upstream="build-tools-release" />
+  <project path="prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.17-4.8" name="platform/prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.17-4.8" clone-depth="1" revision="325d7343d560088ace9f3919c9362d8983980148" upstream="build-tools-release" />
 
-  <project clone-depth="1" name="platform/prebuilts/gcc/linux-x86/x86/x86_64-linux-android-4.9" path="prebuilts/gcc/linux-x86/x86/x86_64-linux-android-4.9" revision="5829f985214310ebf005ae6ee52ce9742b489804" upstream="build-tools-release" />
+  <project path="prebuilts/gcc/linux-x86/x86/x86_64-linux-android-4.9" name="platform/prebuilts/gcc/linux-x86/x86/x86_64-linux-android-4.9" clone-depth="1" revision="5829f985214310ebf005ae6ee52ce9742b489804" upstream="build-tools-release" />
 
-  <project clone-depth="1" groups="linux" name="platform/prebuilts/go/linux-x86" path="prebuilts/go/linux-x86" revision="3573a7f36714942fd83ff92b2eb770d62e7a748c" upstream="build-tools-release" />
+  <project path="prebuilts/go/linux-x86" name="platform/prebuilts/go/linux-x86" groups="linux" clone-depth="1" revision="7591005972580179fc7a4af30d1ab5aeb33fee08" upstream="build-tools-release" />
 
-  <project clone-depth="1" groups="linux" name="platform/prebuilts/ninja/linux-x86" path="prebuilts/ninja/linux-x86" revision="cfaa2ca50f534ec2945c2587ffa119519268efad" upstream="build-tools-release" />
+  <project path="prebuilts/ninja/linux-x86" name="platform/prebuilts/ninja/linux-x86" groups="linux" clone-depth="1" revision="cfaa2ca50f534ec2945c2587ffa119519268efad" upstream="build-tools-release" />
 
-  <project clone-depth="1" groups="darwin" name="platform/prebuilts/clang/host/darwin-x86" path="prebuilts/clang/host/darwin-x86" revision="68442395633f4adb1dda46287af789fe699c2c75" upstream="build-tools-release" />
+  <project path="prebuilts/clang/host/darwin-x86" name="platform/prebuilts/clang/host/darwin-x86" groups="darwin" clone-depth="1" revision="e65f0ee03759acdf199c786f0b9e454fca067fcd" upstream="build-tools-release" />
 
-  <project clone-depth="1" groups="darwin" name="platform/prebuilts/gcc/darwin-x86/host/headers" path="prebuilts/gcc/darwin-x86/host/headers" revision="4ac4f7cc41cf3c9e36fc3d6cf37fd1cfa9587a68" upstream="build-tools-release" />
+  <project path="prebuilts/gcc/darwin-x86/host/headers" name="platform/prebuilts/gcc/darwin-x86/host/headers" groups="darwin" clone-depth="1" revision="4ac4f7cc41cf3c9e36fc3d6cf37fd1cfa9587a68" upstream="build-tools-release" />
 
-  <project clone-depth="1" groups="darwin" name="platform/prebuilts/gcc/darwin-x86/host/i686-apple-darwin-4.2.1" path="prebuilts/gcc/darwin-x86/host/i686-apple-darwin-4.2.1" revision="0197f6709a21d106bc37587695be434bce37f7a6" upstream="build-tools-release" />
+  <project path="prebuilts/gcc/darwin-x86/host/i686-apple-darwin-4.2.1" name="platform/prebuilts/gcc/darwin-x86/host/i686-apple-darwin-4.2.1" groups="darwin" clone-depth="1" revision="0197f6709a21d106bc37587695be434bce37f7a6" upstream="build-tools-release" />
 
-  <project clone-depth="1" groups="darwin" name="platform/prebuilts/go/darwin-x86" path="prebuilts/go/darwin-x86" revision="18ed676a0b59be21501a6bcb634be973831fb786" upstream="build-tools-release" />
+  <project path="prebuilts/go/darwin-x86" name="platform/prebuilts/go/darwin-x86" groups="darwin" clone-depth="1" revision="3755d0773e69ef470917ee4efcc9762042552d50" upstream="build-tools-release" />
 
-  <project clone-depth="1" groups="darwin" name="platform/prebuilts/ninja/darwin-x86" path="prebuilts/ninja/darwin-x86" revision="2433f0ca209251e67a89bbaf6c34da9fe54edeac" upstream="build-tools-release" />
+  <project path="prebuilts/ninja/darwin-x86" name="platform/prebuilts/ninja/darwin-x86" groups="darwin" clone-depth="1" revision="2433f0ca209251e67a89bbaf6c34da9fe54edeac" upstream="build-tools-release" />
 
-  <project clone-depth="1" groups="linux" name="platform/prebuilts/clang/host/windows-x86" path="prebuilts/clang/host/windows-x86" revision="6403bfef08d6a381529bfeab3bb6aeb64fa2a495" upstream="build-tools-release" />
+  <project path="prebuilts/clang/host/windows-x86" name="platform/prebuilts/clang/host/windows-x86" groups="linux" clone-depth="1" revision="aa3e9f612b203b837ece473bc1fce5b1bd258c75" upstream="build-tools-release" />
 
-  <project clone-depth="1" groups="linux" name="platform/prebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8" path="prebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8" revision="394eb6414b099b017e355ceae71d5bd22938c46e" upstream="build-tools-release" />
+  <project path="prebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8" name="platform/prebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8" groups="linux" clone-depth="1" revision="871998ded8d540ac5d82a9a59a0343eaa95dfbc8" upstream="build-tools-release" />
 
-  <project clone-depth="1" name="platform/prebuilts/jdk/jdk11" path="prebuilts/jdk/jdk11" revision="38b5e4530ecd8512643431db1851374304a86b8c" upstream="build-tools-release" />
+  <project path="prebuilts/jdk/jdk17" name="platform/prebuilts/jdk/jdk17" clone-depth="1" revision="cb6df1807b95de38d16fabaee8b2335b98127ce7" upstream="build-tools-release" />
 
-  <project clone-depth="1" name="platform/prebuilts/jdk/jdk8" path="prebuilts/jdk/jdk8" revision="74e4f1844dfa9b8df9e0fe2ff34a2ecc24d52b07" upstream="build-tools-release" />
+  <project path="prebuilts/jdk/jdk11" name="platform/prebuilts/jdk/jdk11" clone-depth="1" revision="a14382629669d1cbd4fb757e2961c9530b410c17" upstream="build-tools-release" />
 
-  <project clone-depth="1" name="platform/prebuilts/jdk/jdk9" path="prebuilts/jdk/jdk9" revision="0ff41a53c757fed33a113405c4183dc41951d9d6" upstream="build-tools-release" />
+  <project path="prebuilts/jdk/jdk8" name="platform/prebuilts/jdk/jdk8" clone-depth="1" revision="74e4f1844dfa9b8df9e0fe2ff34a2ecc24d52b07" upstream="build-tools-release" />
 
-  <project clone-depth="1" name="platform/prebuilts/clang-tools" path="prebuilts/clang-tools" revision="acf69ef3af49f628d230a3075f861b2d624a43a8" upstream="build-tools-release" />
+  <project path="prebuilts/jdk/jdk9" name="platform/prebuilts/jdk/jdk9" clone-depth="1" revision="0ff41a53c757fed33a113405c4183dc41951d9d6" upstream="build-tools-release" />
 
-  <project clone-depth="1" name="platform/prebuilts/misc" path="prebuilts/misc" revision="babbbc42fe6acb9c7c220f0a76d3af6cd4a6017b" upstream="build-tools-release" />
+  <project path="prebuilts/clang-tools" name="platform/prebuilts/clang-tools" clone-depth="1" revision="60f81ec865018075c89ccdb886e7782235c0df8a" upstream="build-tools-release" />
 
-  <project clone-depth="1" groups="pdk,tools" name="platform/prebuilts/tools" path="prebuilts/tools" revision="c3c160abf40cad1f0b12ae8ecba5acecb99e9674" upstream="build-tools-release" />
+  <project path="prebuilts/misc" name="platform/prebuilts/misc" clone-depth="1" revision="c8969255cf39c6ff617fd6f0e0ebd58fb20df111" upstream="build-tools-release" />
 
-  <project name="platform/bionic" path="bionic" revision="c093e0919f6d48f404d8d9b7b45963c030ad1924" upstream="build-tools-release" />
+  <project path="prebuilts/tools" name="platform/prebuilts/tools" groups="pdk,tools" clone-depth="1" revision="b44ad60224a6bef94e0fbebb992b6cff2ce75107" upstream="build-tools-release" />
 
-  <project name="platform/development" path="development" revision="d145c61bcfbc87d09172470c86f513b322576d83" upstream="build-tools-release" />
+  <project path="bionic" name="platform/bionic" revision="00e0d34d55136d6c11239fccfd8e281c5e0b2b43" upstream="build-tools-release" />
 
-  <project name="platform/external/arm-optimized-routines" path="external/arm-optimized-routines" revision="1c9813378c5dd9770241459eb61a4a039e026c6b" upstream="build-tools-release" />
+  <project path="development" name="platform/development" revision="b9cf76a4bdf9af300d0912959971926d8d5caf81" upstream="build-tools-release" />
 
-  <project name="platform/external/auto" path="external/auto" revision="170de5c699347db63f181a3cd19754f7ff792404" upstream="build-tools-release" />
+  <project path="external/arm-optimized-routines" name="platform/external/arm-optimized-routines" revision="fdf352361b1cc1644f5ab56ebc517b5e0ea5850f" upstream="build-tools-release" />
 
-  <project name="platform/external/abseil-cpp" path="external/abseil-cpp" revision="db776f92317a92afc1704470903a19b8d6a70012" upstream="build-tools-release" />
+  <project path="external/auto" name="platform/external/auto" revision="541e7a789fd389968fbb36a6480e730db90021e9" upstream="build-tools-release" />
 
-  <project name="platform/external/boringssl" path="external/boringssl" revision="4293c7cd3685ad7efff7046ad92233e9b962b061" upstream="build-tools-release" />
+  <project path="external/abseil-cpp" name="platform/external/abseil-cpp" revision="db776f92317a92afc1704470903a19b8d6a70012" upstream="build-tools-release" />
 
-  <project name="platform/external/capstone" path="external/capstone" revision="5e914c02322762f4fe923e905450d5abef318710" upstream="build-tools-release" />
+  <project path="external/boringssl" name="platform/external/boringssl" revision="61cf91ea85471fb46de7ac2edb70fee441bf4ea9" upstream="build-tools-release" />
 
-  <project name="platform/external/clang" path="external/clang" revision="be37abdfb8ea04707547a223674a66f59febf687" upstream="build-tools-release" />
+  <project path="external/brotli" name="platform/external/brotli" revision="ae50f83adeca74b1aa37cd794882b86bbc1bcb9e" upstream="build-tools-release" />
 
-  <project name="platform/external/compiler-rt" path="external/compiler-rt" revision="9e2d3f74317402ca8caa89403b4f371f40288884" upstream="build-tools-release" />
+  <project path="external/capstone" name="platform/external/capstone" revision="831700ba1603d78105abdc4be0bb761aa3ea94a5" upstream="build-tools-release" />
 
-  <project name="platform/external/dagger2" path="external/dagger2" revision="4d730ba6656d03b8447a6d0fda0c240663dbd28d" upstream="build-tools-release" />
+  <project path="external/clang" name="platform/external/clang" revision="0d50fd97b154bbf6a0922beefaacc3a05b0b9d15" upstream="build-tools-release" />
 
-  <project clone-depth="1" name="platform/external/error_prone" path="external/error_prone" revision="1868e0e4afcd499e380350a63cc88b78c7cd0f0b" upstream="build-tools-release" />
+  <project path="external/compiler-rt" name="platform/external/compiler-rt" revision="9e2d3f74317402ca8caa89403b4f371f40288884" upstream="build-tools-release" />
 
-  <project name="platform/external/escapevelocity" path="external/escapevelocity" revision="e3a8bb0fae9c5f25890c84e3378e51373b52a909" upstream="build-tools-release" />
+  <project path="external/dagger2" name="platform/external/dagger2" revision="1ac730f1ce680d9f010eedf5fbf97022a6fa9fb2" upstream="build-tools-release" />
 
-  <project name="platform/external/expat" path="external/expat" revision="f332090ae890a33cb1dc7c3e7077c186699aff2a" upstream="build-tools-release" />
+  <project path="external/error_prone" name="platform/external/error_prone" clone-depth="1" revision="88c0574d51116587aa46cf805d915f1597ca0097" upstream="build-tools-release" />
 
-  <project name="platform/external/fmtlib" path="external/fmtlib" revision="4f9e441d30ad1c41a065f4e644cdac798154e97c" upstream="build-tools-release" />
+  <project path="external/escapevelocity" name="platform/external/escapevelocity" revision="e3a8bb0fae9c5f25890c84e3378e51373b52a909" upstream="build-tools-release" />
 
-  <project name="platform/external/go-cmp" path="external/go-cmp" revision="dfdff05c1f6e6efdf3c47fdc63cd6ceb4c6a5d4a" upstream="build-tools-release" />
+  <project path="external/expat" name="platform/external/expat" revision="a7eb29a8b58d12fd27d20695200c6cabb17d2dd0" upstream="build-tools-release" />
 
-  <project name="platform/external/go-creachadair-shell" path="external/go-creachadair-shell" revision="bbbc3604ea8929caee86551ea0028880316c4be6" upstream="build-tools-release" />
+  <project path="external/fmtlib" name="platform/external/fmtlib" revision="9bdab7ae9a5b6c98faaafd89c4cc37555ae6a9b0" upstream="build-tools-release" />
 
-  <project name="platform/external/go-creachadair-stringset" path="external/go-creachadair-stringset" revision="7cc3132c8ccb3d58640625858427e0d228c3cf65" upstream="build-tools-release" />
+  <project path="external/go-cmp" name="platform/external/go-cmp" revision="03012353bcbb3ab64b0fd9b0278862bbd9355a54" upstream="build-tools-release" />
 
-  <project name="platform/external/go-etree" path="external/go-etree" revision="7fa46d9c9eb9134443a7fc56a354f07b15fc3a76" upstream="build-tools-release" />
+  <project path="external/go-creachadair-shell" name="platform/external/go-creachadair-shell" revision="c5cac7bf5edbf2f2df4e40be9339c6f642a4f9bf" upstream="build-tools-release" />
 
-  <project name="platform/external/go-subcommands" path="external/go-subcommands" revision="65ad1a262be0dc6ee990366e052759769a5e9f13" upstream="build-tools-release" />
+  <project path="external/go-creachadair-stringset" name="platform/external/go-creachadair-stringset" revision="7cc3132c8ccb3d58640625858427e0d228c3cf65" upstream="build-tools-release" />
 
-  <project name="platform/external/golang-x-sync" path="external/golang-x-sync" revision="9831fe029e5158a1c094ba12ca461c2d7c5f2589" upstream="build-tools-release" />
+  <project path="external/go-etree" name="platform/external/go-etree" revision="7fa46d9c9eb9134443a7fc56a354f07b15fc3a76" upstream="build-tools-release" />
 
-  <project name="platform/external/golang-x-sys" path="external/golang-x-sys" revision="a02e6bb6ecaba8aa3d3f9336f4faca3bac5106e5" upstream="build-tools-release" />
+  <project path="external/go-subcommands" name="platform/external/go-subcommands" revision="65ad1a262be0dc6ee990366e052759769a5e9f13" upstream="build-tools-release" />
 
-  <project name="platform/external/golang-x-tools" path="external/golang-x-tools" revision="3225eca48f7ce16eb31b2dd5a170806c1214a49e" upstream="build-tools-release" />
+  <project path="external/golang-x-sync" name="platform/external/golang-x-sync" revision="9831fe029e5158a1c094ba12ca461c2d7c5f2589" upstream="build-tools-release" />
 
-  <project name="platform/external/google-java-format" path="external/google-java-format" revision="2e807a09ae0a6425158ce9f6dd5c973a18000c69" upstream="build-tools-release" />
+  <project path="external/golang-x-sys" name="platform/external/golang-x-sys" revision="bbc68259cffb5b7825353939fdc0e422c1b22837" upstream="build-tools-release" />
 
-  <project name="platform/external/googletest" path="external/googletest" revision="d2d9eae964f8a1c9431c908d4a5dc502801c42ed" upstream="build-tools-release" />
+  <project path="external/golang-x-tools" name="platform/external/golang-x-tools" revision="3225eca48f7ce16eb31b2dd5a170806c1214a49e" upstream="build-tools-release" />
 
-  <project name="platform/external/guava" path="external/guava" revision="cea8b35c5ef589dc9ceff02bc8e85f6e8b721fb9" upstream="build-tools-release" />
+  <project path="external/google-java-format" name="platform/external/google-java-format" revision="b94a5851957eabd58755f0373b94be6f17fe50b7" upstream="build-tools-release" />
 
-  <project name="platform/external/icu" path="external/icu" revision="2fe8eaded815eebf7c309435224140af71b37dc2" upstream="build-tools-release" />
+  <project path="external/googletest" name="platform/external/googletest" revision="9a2939ad28db931433b161dd3cda97301192f8be" upstream="build-tools-release" />
+
+  <project path="external/guava" name="platform/external/guava" revision="9f8001df9a563676c08ba735dc1ab10ffc27d72c" upstream="build-tools-release" />
+
+  <project path="external/icu" name="platform/external/icu" revision="45604164e341b793d9cbd8677ca361f5fd05c045" upstream="build-tools-release" />
+
+  <project path="external/javapoet" name="platform/external/javapoet" revision="d274ed4f3e04713ec752625c446b9f59daaa80bb" upstream="build-tools-release" />
+
+  <project path="external/jemalloc_new" name="platform/external/jemalloc_new" revision="298950a99e1643f111da75ac3a80139a520fcca7" upstream="build-tools-release" />
+
+  <project path="external/jsoncpp" name="platform/external/jsoncpp" revision="32a76503fac7218713f4b7f0efe3a7cd35b4a373" upstream="build-tools-release" />
+
+  <project path="external/jsr305" name="platform/external/jsr305" revision="35925fe0d5590dc3ab64497d6c37c4871c464948" upstream="build-tools-release" />
 
-  <project name="platform/external/javapoet" path="external/javapoet" revision="d274ed4f3e04713ec752625c446b9f59daaa80bb" upstream="build-tools-release" />
+  <project path="external/kythe" name="platform/external/kythe" revision="61aaf8c668cf9d3888b8b0967f9ad4fcbc606596" upstream="build-tools-release" />
 
-  <project name="platform/external/jemalloc_new" path="external/jemalloc_new" revision="78cad16a8b319223f4ff824d9a4b31267b9cc33a" upstream="build-tools-release" />
+  <project path="external/libcap" name="platform/external/libcap" revision="8baa78639294a7deb0b0961608f1ee86380496db" upstream="build-tools-release" />
 
-  <project name="platform/external/jsoncpp" path="external/jsoncpp" revision="32a76503fac7218713f4b7f0efe3a7cd35b4a373" upstream="build-tools-release" />
+  <project path="external/libcxx" name="platform/external/libcxx" revision="8a503b1129a11e74eb23318907b667fff2fd7d92" upstream="build-tools-release" />
 
-  <project name="platform/external/jsr305" path="external/jsr305" revision="35925fe0d5590dc3ab64497d6c37c4871c464948" upstream="build-tools-release" />
+  <project path="external/libcxxabi" name="platform/external/libcxxabi" revision="15b69654c77ca272eac30cae935c03244fa75aee" upstream="build-tools-release" />
 
-  <project name="platform/external/kythe" path="external/kythe" revision="d378bed15e1e109215e9af3b50ae0b41c234d2bb" upstream="build-tools-release" />
+  <project path="external/libffi" name="platform/external/libffi" revision="ef492c308cbd32b48a78ab1f9c857cad4ce316b7" upstream="build-tools-release" />
 
-  <project name="platform/external/libcxx" path="external/libcxx" revision="70cb6f3dc3de7aefc1d85167c1da3abd63fb8bde" upstream="build-tools-release" />
+  <project path="external/libnl" name="platform/external/libnl" revision="cc1dcb0e233d877dead1b63e9891ad2c1934903b" upstream="build-tools-release" />
 
-  <project name="platform/external/libcxxabi" path="external/libcxxabi" revision="95f69da66d12a2f30a96b18be9166b58aa366aba" upstream="build-tools-release" />
+  <project path="external/libunwind" name="platform/external/libunwind" revision="003e4832d571cacfb8ca333daa6e99c22f6bf0da" upstream="build-tools-release" />
 
-  <project name="platform/external/libffi" path="external/libffi" revision="26b76f3eb3e1b24928fd8b3702d4867a5e30be1f" upstream="build-tools-release" />
+  <project path="external/libunwind_llvm" name="platform/external/libunwind_llvm" revision="fee7d0130129f8598b917133c890da370a74c605" upstream="build-tools-release" />
 
-  <project name="platform/external/libnl" path="external/libnl" revision="cc1dcb0e233d877dead1b63e9891ad2c1934903b" upstream="build-tools-release" />
+  <project path="external/llvm" name="platform/external/llvm" revision="9e122600d13579682c1533021b68b754c4846086" upstream="build-tools-release" />
 
-  <project name="platform/external/libunwind" path="external/libunwind" revision="003e4832d571cacfb8ca333daa6e99c22f6bf0da" upstream="build-tools-release" />
+  <project path="external/lzma" name="platform/external/lzma" revision="3e8a4d1d81b7e8e046ad1f5e79dcbe4ff839404e" upstream="build-tools-release" />
 
-  <project name="platform/external/libunwind_llvm" path="external/libunwind_llvm" revision="fee7d0130129f8598b917133c890da370a74c605" upstream="build-tools-release" />
+  <project path="external/musl" name="platform/external/musl" revision="b0b91da8fed93527d39a318a5ef2650d5269dfe4" upstream="build-tools-release" />
 
-  <project name="platform/external/llvm" path="external/llvm" revision="0ba656459e375c10c44367f032d14959c6320f31" upstream="build-tools-release" />
+  <project path="external/pcre" name="platform/external/pcre" revision="7f2d43c42516f314bc7691cb871569a5e172c927" upstream="build-tools-release" />
 
-  <project name="platform/external/lzma" path="external/lzma" revision="3e8a4d1d81b7e8e046ad1f5e79dcbe4ff839404e" upstream="build-tools-release" />
+  <project path="external/protobuf" name="platform/external/protobuf" revision="6ac9c46d18658030aefbf25782ee4f3dd344736f" upstream="build-tools-release" />
 
-  <project name="platform/external/musl" path="external/musl" revision="0ec25d0fad188a9ed3c294e5528fefd25463c1aa" upstream="build-tools-release" />
+  <project path="external/safe-iop" name="platform/external/safe-iop" revision="b805514f31a231a0e78a18f296c0454fcadead1a" upstream="build-tools-release" />
 
-  <project name="platform/external/pcre" path="external/pcre" revision="fe81096baddfe4d58f69306f123dae70654b4af6" upstream="build-tools-release" />
+  <project path="external/selinux" name="platform/external/selinux" revision="40b7b48b4b16e7e43e4cfe85c4d9761c85c0140b" upstream="build-tools-release" />
 
-  <project name="platform/external/protobuf" path="external/protobuf" revision="c07588831bd88abc64dbf3b587559f017015fe40" upstream="build-tools-release" />
+  <project path="external/sqlite" name="platform/external/sqlite" revision="d2498427bd10fd10ad4ac7ec2a75961864096e1a" upstream="build-tools-release" />
 
-  <project name="platform/external/safe-iop" path="external/safe-iop" revision="b805514f31a231a0e78a18f296c0454fcadead1a" upstream="build-tools-release" />
+  <project path="external/starlark-go" name="platform/external/starlark-go" revision="dfe047847e867d4b297b4524a129e169484d8c42" upstream="build-tools-release" />
 
-  <project name="platform/external/selinux" path="external/selinux" revision="2fe4fad491aa904a84e093f44a807931fed46625" upstream="build-tools-release" />
+  <project path="external/tinyxml2" name="platform/external/tinyxml2" revision="d14dbfae7463c5d9551475f77cc12121e64a2e76" upstream="build-tools-release" />
 
-  <project name="platform/external/sqlite" path="external/sqlite" revision="dec725a9d4d6a4da79ccf554bda224a461eeded5" upstream="build-tools-release" />
+  <project path="external/zlib" name="platform/external/zlib" revision="9793522ca810114470cab1ed7f30172199bf0dc2" upstream="build-tools-release" />
 
-  <project name="platform/external/starlark-go" path="external/starlark-go" revision="dfe047847e867d4b297b4524a129e169484d8c42" upstream="build-tools-release" />
+  <project path="external/zopfli" name="platform/external/zopfli" revision="cf3f34689a36a959d4578e82adb46532e38c2eaa" upstream="build-tools-release" />
 
-  <project name="platform/external/zlib" path="external/zlib" revision="de355433d43a3449a3e77f63b074a10c9197aaec" upstream="build-tools-release" />
+  <project path="system/core" name="platform/system/core" revision="74b8a2bf2d277c3edbe59c54f11b41dad683c539" upstream="build-tools-release" />
 
-  <project name="platform/external/zopfli" path="external/zopfli" revision="cf3f34689a36a959d4578e82adb46532e38c2eaa" upstream="build-tools-release" />
+  <project path="system/libbase" name="platform/system/libbase" revision="6edead1c33b10216675c2c8e5b75737b3fed052f" upstream="build-tools-release" />
 
-  <project name="platform/system/core" path="system/core" revision="6fdcc57e3d8c3761a242ab8c3c9ff03df7c5a1a2" upstream="build-tools-release" />
+  <project path="system/libhwbinder" name="platform/system/libhwbinder" revision="05797cc83702bc74a7e6400e30556d6e71d69c65" upstream="build-tools-release" />
 
-  <project name="platform/system/libbase" path="system/libbase" revision="a6c75ad3b52211a9368fda383b535c30f5c5ca58" upstream="build-tools-release" />
+  <project path="system/libziparchive" name="platform/system/libziparchive" revision="c8f50e0c8b5e3144c37b9ed292f2b56565f2f759" upstream="build-tools-release" />
 
-  <project name="platform/system/libhwbinder" path="system/libhwbinder" revision="7209ac3db2691bb831a90aafe08c9dc1daacba60" upstream="build-tools-release" />
+  <project path="system/logging" name="platform/system/logging" revision="3c86b3f19653f9b40b917a0892350d5fdd7cf613" upstream="build-tools-release" />
 
-  <project name="platform/system/libziparchive" path="system/libziparchive" revision="6f25617f751e5c9a013dd5e490de1faf90b4a576" upstream="build-tools-release" />
+  <project path="system/unwinding" name="platform/system/unwinding" revision="60829087322483afa77e31d82b0e1b2f90968073" upstream="build-tools-release" />
 
-  <project name="platform/system/logging" path="system/logging" revision="838f03c47c3b891f4febcd6a5b70c0038e07cb7d" upstream="build-tools-release" />
+  <project path="system/tools/xsdc" name="platform/system/tools/xsdc" revision="c2dc576410697f2501793215642f3cb096328df5" upstream="build-tools-release" />
 
-  <project name="platform/system/unwinding" path="system/unwinding" revision="aa737839c449735c70f355ffaf33833e141ada5b" upstream="build-tools-release" />
+  <project path="test/app_compat/csuite" name="platform/test/app_compat/csuite" revision="1522cc108e3cf3596483f9cacd101951e36d374f" upstream="build-tools-release" />
 
-  <project name="platform/system/tools/xsdc" path="system/tools/xsdc" revision="ad69f814f6456bf07799cb0576ed7d4d3f554a71" upstream="build-tools-release" />
+  <project path="art" name="platform/art" revision="f2be98934b31142e152e5ec1f559239362f212fb" upstream="build-tools-release" />
 
-  <project name="platform/test/app_compat/csuite" path="test/app_compat/csuite" revision="5387d15c213eb1a3366bae2545ad8d3f790643d3" upstream="build-tools-release" />
+  <project path="build/kati" name="platform/build/kati" revision="6ad4268491b968b4cb257aeeb8c6a605ea8af8bf" upstream="build-tools-release" />
 
-  <project name="platform/art" path="art" revision="16ae04de14db430c8ec239e75cd9d0553a27c311" upstream="build-tools-release" />
+  <project path="dalvik" name="platform/dalvik" revision="248b306ac6bf9f2e4a9fd585bae4286d9861ff1e" upstream="build-tools-release" />
 
-  <project name="platform/build/kati" path="build/kati" revision="6ad4268491b968b4cb257aeeb8c6a605ea8af8bf" upstream="build-tools-release" />
+  <project path="external/bc" name="platform/external/bc" revision="9700b70dfccebfbfeac15e67f47e6411884dadde" upstream="build-tools-release" />
 
-  <project name="platform/dalvik" path="dalvik" revision="2ed4e395d9c290db1c52482090cf7340f1c6f88d" upstream="build-tools-release" />
+  <project path="external/bison" name="platform/external/bison" revision="d868ebf0b94600d99735f2bd4a77bc9245ce11c4" upstream="build-tools-release" />
 
-  <project name="platform/external/bc" path="external/bc" revision="830c78bfc070f6f019571b2682c7892604561cba" upstream="build-tools-release" />
+  <project path="external/bloaty" name="platform/external/bloaty" revision="4e97ca09798800c00d8887d6b63992669fb1a631" upstream="build-tools-release" />
 
-  <project name="platform/external/bison" path="external/bison" revision="d868ebf0b94600d99735f2bd4a77bc9245ce11c4" upstream="build-tools-release" />
+  <project path="external/bzip2" name="platform/external/bzip2" revision="727c7f5073e1c66974a2f9015e04a995177ca3cd" upstream="build-tools-release" />
 
-  <project name="platform/external/bloaty" path="external/bloaty" revision="4e97ca09798800c00d8887d6b63992669fb1a631" upstream="build-tools-release" />
+  <project path="external/desugar" name="platform/external/desugar" revision="2b6fe11a15a2d244f3bd2998bc361f7f89965281" upstream="build-tools-release" />
 
-  <project name="platform/external/bzip2" path="external/bzip2" revision="727c7f5073e1c66974a2f9015e04a995177ca3cd" upstream="build-tools-release" />
+  <project path="external/flex" name="platform/external/flex" revision="e058c910354051d00ffa40f58df150a105fd31cb" upstream="build-tools-release" />
 
-  <project name="platform/external/desugar" path="external/desugar" revision="2b6fe11a15a2d244f3bd2998bc361f7f89965281" upstream="build-tools-release" />
+  <project path="external/kotlinc" name="platform/external/kotlinc" revision="47d04cd8b7337ef40b8af371dc7843781baf3997" upstream="build-tools-release" />
 
-  <project name="platform/external/flex" path="external/flex" revision="e058c910354051d00ffa40f58df150a105fd31cb" upstream="build-tools-release" />
+  <project path="external/ktfmt" name="platform/external/ktfmt" revision="483955c2fd55a382a1786d14576b96127561e2da" upstream="build-tools-release" />
 
-  <project name="platform/external/ninja" path="external/ninja" revision="0c2101e9f1e0b9f85b1c6032148a57f887c1475e" upstream="build-tools-release" />
+  <project path="external/ninja" name="platform/external/ninja" revision="59df7e6534959fe09be3d57a31dc700316384857" upstream="build-tools-release" />
 
-  <project name="platform/external/nsjail" path="external/nsjail" revision="52fd46b555cb427199d5d44e49287151244a4cd8" upstream="build-tools-release" />
+  <project path="external/nsjail" name="platform/external/nsjail" revision="52fd46b555cb427199d5d44e49287151244a4cd8" upstream="build-tools-release" />
 
-  <project name="platform/external/one-true-awk" path="external/one-true-awk" revision="539f77df4407fddf23dce84e20a59b1475b20e3f" upstream="build-tools-release" />
+  <project path="external/one-true-awk" name="platform/external/one-true-awk" revision="a8c47c3c6337b1492bdf9d5def38422bd277f596" upstream="build-tools-release" />
 
-  <project name="platform/external/openssl" path="external/openssl" revision="1998e09b0111afe2318e3c9b47be510c9ce6f07a" upstream="build-tools-release" />
+  <project path="external/openssl" name="platform/external/openssl" revision="fd366b99a2ddf516e8414e37ac57abe694693d51" upstream="build-tools-release" />
 
-  <project name="platform/external/python/cpython2" path="external/python/cpython2" revision="66a1bd5b30cf3915a4e087c40aaceb5561ff9e79" upstream="build-tools-release" />
+  <project path="external/python/cpython2" name="platform/external/python/cpython2" revision="8ed0712f20da2a6c4f9c42d24023164e7810c479" upstream="build-tools-release" />
 
-  <project name="platform/external/python/cpython3" path="external/python/cpython3" revision="69d927acd83d5b74e046bc7b55a18423b5a049d8" upstream="build-tools-release" />
+  <project path="external/python/cpython3" name="platform/external/python/cpython3" revision="e5e646b15563ff324c78abd20705329ac3bbfd65" upstream="build-tools-release" />
 
-  <project name="platform/external/toybox" path="external/toybox" revision="5b39beb4a0780e107d42c46e78c42b1d9399953a" upstream="build-tools-release" />
+  <project path="external/toybox" name="platform/external/toybox" revision="c0c39cbfd89fc7ea02164db9743de8579c5c5786" upstream="build-tools-release" />
 
-  <project name="platform/external/turbine" path="external/turbine" revision="097e956e80b1ae0668ea105618d71087159f4647" upstream="build-tools-release" />
+  <project path="external/turbine" name="platform/external/turbine" revision="b98660ab44098f5dd8504506f859f585b402a19e" upstream="build-tools-release" />
 
-  <project name="platform/system/tools/aidl" path="system/tools/aidl" revision="ec2a6e39f6a40e5c51c5aead3b953dda77cd33ea" upstream="build-tools-release" />
+  <project path="system/tools/aidl" name="platform/system/tools/aidl" revision="0097f3b3ead6fd2bfae30b43e70bd974d289fbe7" upstream="build-tools-release" />
 
-  <project name="platform/system/tools/hidl" path="system/tools/hidl" revision="66102d7eeaf4f1206d8f3b81071b9e76736a0097" upstream="build-tools-release" />
+  <project path="system/tools/hidl" name="platform/system/tools/hidl" revision="22983cb6a32214c3620920e850f95cc0229c2a67" upstream="build-tools-release" />
 
-  <project name="toolchain/go" revision="01b90271bfe5ae1e2766f2c8f1272e6458f3918e" upstream="build-tools-release" />
+  <project name="toolchain/go" revision="76a6577c129bd57bb4becec4ccfad3fb25e8e3cc" upstream="build-tools-release" />
 
-  <project name="toolchain/m4" revision="2880c62e70c98965ec978ae229a8cf379573599f" upstream="build-tools-release" />
+  <project name="toolchain/m4" revision="999e923272bc2cedab2abcd9206e449b91635e3e" upstream="build-tools-release" />
 
-  <project name="toolchain/make" revision="98b2bd218f82dd5f3ecb054846ae4fdd01a76588" upstream="build-tools-release" />
+  <project name="toolchain/make" revision="7f1b28cb868e94502c5c97dcd9bbe357853f0542" upstream="build-tools-release" />
 
   <project name="toolchain/xz" revision="e953aba95e0060876d5969cc9322cf2dbb5e2cf5" upstream="build-tools-release" />
 </manifest>
diff --git a/sysroots/i686-linux-musl/NOTICE.bionic b/sysroots/i686-linux-musl/NOTICE.bionic
index 9cbbde2..fa3dd2c 100644
--- a/sysroots/i686-linux-musl/NOTICE.bionic
+++ b/sysroots/i686-linux-musl/NOTICE.bionic
@@ -783,22 +783,6 @@
 -------------------------------------------------------------------
 
 Copyright (C) 2019 The Android Open Source Project
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-
--------------------------------------------------------------------
-
-Copyright (C) 2019 The Android Open Source Project
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without
@@ -826,34 +810,6 @@
 
 -------------------------------------------------------------------
 
-Copyright (C) 2019 The Android Open Source Project
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in
-   the documentation and/or other materials provided with the
-   distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
-OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
--------------------------------------------------------------------
-
 Copyright (C) 2020 The Android Open Source Project
 All rights reserved.
 
diff --git a/sysroots/i686-linux-musl/NOTICE.zlib b/sysroots/i686-linux-musl/NOTICE.zlib
new file mode 100644
index 0000000..8aca25d
--- /dev/null
+++ b/sysroots/i686-linux-musl/NOTICE.zlib
@@ -0,0 +1,19 @@
+version 1.2.12, March 27th, 2022
+
+Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
+
+This software is provided 'as-is', without any express or implied
+warranty.  In no event will the authors be held liable for any damages
+arising from the use of this software.
+
+Permission is granted to anyone to use this software for any purpose,
+including commercial applications, and to alter it and redistribute it
+freely, subject to the following restrictions:
+
+1. The origin of this software must not be misrepresented; you must not
+   claim that you wrote the original software. If you use this software
+   in a product, an acknowledgment in the product documentation would be
+   appreciated but is not required.
+2. Altered source versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+3. This notice may not be removed or altered from any source distribution.
diff --git a/sysroots/i686-linux-musl/include/BUILD b/sysroots/i686-linux-musl/include/BUILD
new file mode 100644
index 0000000..2f92464
--- /dev/null
+++ b/sysroots/i686-linux-musl/include/BUILD
@@ -0,0 +1,67 @@
+# Copyright (C) 2022 The Android Open Source Project
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#  * Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+
+load("//build/bazel/rules/apis:cc_api_contribution.bzl", "cc_api_headers")
+
+package(default_visibility = ["//bionic/libc:__pkg__"])
+
+cc_api_headers(
+  name="libc_kernel_uapi_headers",
+  hdrs=glob(["**/*.h"]),
+  system=True,
+)
+
+cc_api_headers(
+  name="libc_kernal_uapi_asm_arm_headers",
+  include_dir="asm-arm",
+  hdrs=glob(["asm-arm/**/*.h"]),
+  system=True,
+  arch="arm",
+)
+
+cc_api_headers(
+  name="libc_kernal_uapi_asm_arm64_headers",
+  include_dir="asm-arm64",
+  hdrs=glob(["asm-arm64/**/*.h"]),
+  system=True,
+  arch="arm64",
+)
+
+cc_api_headers(
+  name="libc_kernal_uapi_asm_x86_headers",
+  include_dir="asm-x86",
+  hdrs=glob(["asm-x86/**/*.h"]),
+  system=True,
+  arch="x86",
+)
+
+cc_api_headers(
+  name="libc_kernal_uapi_asm_x86_64_headers",
+  include_dir="asm-x86_64",
+  hdrs=glob(["asm-x86_64/**/*.h"]),
+  system=True,
+  arch="x86_64",
+)
diff --git a/sysroots/i686-linux-musl/include/asm-arm/asm/signal.h b/sysroots/i686-linux-musl/include/asm-arm/asm/signal.h
index 5f7e0c5..0424380 100644
--- a/sysroots/i686-linux-musl/include/asm-arm/asm/signal.h
+++ b/sysroots/i686-linux-musl/include/asm-arm/asm/signal.h
@@ -78,6 +78,6 @@
 typedef struct sigaltstack {
   void __user * ss_sp;
   int ss_flags;
-  size_t ss_size;
+  __kernel_size_t ss_size;
 } stack_t;
 #endif
diff --git a/sysroots/i686-linux-musl/include/asm-arm64/asm/hwcap.h b/sysroots/i686-linux-musl/include/asm-arm64/asm/hwcap.h
index 4316724..e0dbb13 100644
--- a/sysroots/i686-linux-musl/include/asm-arm64/asm/hwcap.h
+++ b/sysroots/i686-linux-musl/include/asm-arm64/asm/hwcap.h
@@ -72,4 +72,5 @@
 #define HWCAP2_ECV (1 << 19)
 #define HWCAP2_AFP (1 << 20)
 #define HWCAP2_RPRES (1 << 21)
+#define HWCAP2_MTE3 (1 << 22)
 #endif
diff --git a/sysroots/i686-linux-musl/include/asm-arm64/asm/kvm.h b/sysroots/i686-linux-musl/include/asm-arm64/asm/kvm.h
index c53ee87..eee066b 100644
--- a/sysroots/i686-linux-musl/include/asm-arm64/asm/kvm.h
+++ b/sysroots/i686-linux-musl/include/asm-arm64/asm/kvm.h
@@ -214,6 +214,7 @@
 #define KVM_ARM_VCPU_PMU_V3_IRQ 0
 #define KVM_ARM_VCPU_PMU_V3_INIT 1
 #define KVM_ARM_VCPU_PMU_V3_FILTER 2
+#define KVM_ARM_VCPU_PMU_V3_SET_PMU 3
 #define KVM_ARM_VCPU_TIMER_CTRL 1
 #define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0
 #define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1
@@ -244,5 +245,7 @@
 #define KVM_PSCI_RET_NI PSCI_RET_NOT_SUPPORTED
 #define KVM_PSCI_RET_INVAL PSCI_RET_INVALID_PARAMS
 #define KVM_PSCI_RET_DENIED PSCI_RET_DENIED
+#define KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2 (1ULL << 0)
+#define KVM_EXIT_FAIL_ENTRY_CPU_UNSUPPORTED (1ULL << 0)
 #endif
 #endif
diff --git a/sysroots/i686-linux-musl/include/asm-generic/mman-common.h b/sysroots/i686-linux-musl/include/asm-generic/mman-common.h
index 9440576..e96f4cc 100644
--- a/sysroots/i686-linux-musl/include/asm-generic/mman-common.h
+++ b/sysroots/i686-linux-musl/include/asm-generic/mman-common.h
@@ -62,6 +62,7 @@
 #define MADV_PAGEOUT 21
 #define MADV_POPULATE_READ 22
 #define MADV_POPULATE_WRITE 23
+#define MADV_DONTNEED_LOCKED 24
 #define MAP_FILE 0
 #define PKEY_DISABLE_ACCESS 0x1
 #define PKEY_DISABLE_WRITE 0x2
diff --git a/sysroots/i686-linux-musl/include/asm-generic/shmbuf.h b/sysroots/i686-linux-musl/include/asm-generic/shmbuf.h
index 067ffbc..11487f4 100644
--- a/sysroots/i686-linux-musl/include/asm-generic/shmbuf.h
+++ b/sysroots/i686-linux-musl/include/asm-generic/shmbuf.h
@@ -19,9 +19,11 @@
 #ifndef __ASM_GENERIC_SHMBUF_H
 #define __ASM_GENERIC_SHMBUF_H
 #include <asm/bitsperlong.h>
+#include <asm/ipcbuf.h>
+#include <asm/posix_types.h>
 struct shmid64_ds {
   struct ipc64_perm shm_perm;
-  size_t shm_segsz;
+  __kernel_size_t shm_segsz;
 #if __BITS_PER_LONG == 64
   long shm_atime;
   long shm_dtime;
diff --git a/sysroots/i686-linux-musl/include/asm-generic/signal.h b/sysroots/i686-linux-musl/include/asm-generic/signal.h
index 874fece..5cb1dce 100644
--- a/sysroots/i686-linux-musl/include/asm-generic/signal.h
+++ b/sysroots/i686-linux-musl/include/asm-generic/signal.h
@@ -84,7 +84,7 @@
 typedef struct sigaltstack {
   void __user * ss_sp;
   int ss_flags;
-  size_t ss_size;
+  __kernel_size_t ss_size;
 } stack_t;
 #endif
 #endif
diff --git a/sysroots/i686-linux-musl/include/asm-generic/socket.h b/sysroots/i686-linux-musl/include/asm-generic/socket.h
index 6767993..6926187 100644
--- a/sysroots/i686-linux-musl/include/asm-generic/socket.h
+++ b/sysroots/i686-linux-musl/include/asm-generic/socket.h
@@ -100,6 +100,7 @@
 #define SO_NETNS_COOKIE 71
 #define SO_BUF_LOCK 72
 #define SO_RESERVE_MEM 73
+#define SO_TXREHASH 74
 #if __BITS_PER_LONG == 64 || defined(__x86_64__) && defined(__ILP32__)
 #define SO_TIMESTAMP SO_TIMESTAMP_OLD
 #define SO_TIMESTAMPNS SO_TIMESTAMPNS_OLD
diff --git a/sysroots/i686-linux-musl/include/asm-x86/asm/amd_hsmp.h b/sysroots/i686-linux-musl/include/asm-x86/asm/amd_hsmp.h
new file mode 100644
index 0000000..ed59bb8
--- /dev/null
+++ b/sysroots/i686-linux-musl/include/asm-x86/asm/amd_hsmp.h
@@ -0,0 +1,136 @@
+/****************************************************************************
+ ****************************************************************************
+ ***
+ ***   This header was automatically generated from a Linux kernel header
+ ***   of the same name, to make information necessary for userspace to
+ ***   call into the kernel available to libc.  It contains only constants,
+ ***   structures, and macros generated from the original header, and thus,
+ ***   contains no copyrightable information.
+ ***
+ ***   To edit the content of this header, modify the corresponding
+ ***   source file (e.g. under external/kernel-headers/original/) then
+ ***   run bionic/libc/kernel/tools/update_all.py
+ ***
+ ***   Any manual change here will be lost the next time this script will
+ ***   be run. You've been warned!
+ ***
+ ****************************************************************************
+ ****************************************************************************/
+#ifndef _UAPI_ASM_X86_AMD_HSMP_H_
+#define _UAPI_ASM_X86_AMD_HSMP_H_
+#include <linux/types.h>
+#pragma pack(4)
+#define HSMP_MAX_MSG_LEN 8
+enum hsmp_message_ids {
+  HSMP_TEST = 1,
+  HSMP_GET_SMU_VER,
+  HSMP_GET_PROTO_VER,
+  HSMP_GET_SOCKET_POWER,
+  HSMP_SET_SOCKET_POWER_LIMIT,
+  HSMP_GET_SOCKET_POWER_LIMIT,
+  HSMP_GET_SOCKET_POWER_LIMIT_MAX,
+  HSMP_SET_BOOST_LIMIT,
+  HSMP_SET_BOOST_LIMIT_SOCKET,
+  HSMP_GET_BOOST_LIMIT,
+  HSMP_GET_PROC_HOT,
+  HSMP_SET_XGMI_LINK_WIDTH,
+  HSMP_SET_DF_PSTATE,
+  HSMP_SET_AUTO_DF_PSTATE,
+  HSMP_GET_FCLK_MCLK,
+  HSMP_GET_CCLK_THROTTLE_LIMIT,
+  HSMP_GET_C0_PERCENT,
+  HSMP_SET_NBIO_DPM_LEVEL,
+  HSMP_GET_DDR_BANDWIDTH = 0x14,
+  HSMP_GET_TEMP_MONITOR,
+  HSMP_MSG_ID_MAX,
+};
+struct hsmp_message {
+  __u32 msg_id;
+  __u16 num_args;
+  __u16 response_sz;
+  __u32 args[HSMP_MAX_MSG_LEN];
+  __u16 sock_ind;
+};
+enum hsmp_msg_type {
+  HSMP_RSVD = - 1,
+  HSMP_SET = 0,
+  HSMP_GET = 1,
+};
+struct hsmp_msg_desc {
+  int num_args;
+  int response_sz;
+  enum hsmp_msg_type type;
+};
+static const struct hsmp_msg_desc hsmp_msg_desc_table[] = {
+ {
+    0, 0, HSMP_RSVD
+  }
+ , {
+    1, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    1, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    0, 0, HSMP_SET
+  }
+ , {
+    0, 2, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    0, 0, HSMP_RSVD
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ ,
+};
+#pragma pack()
+#define HSMP_BASE_IOCTL_NR 0xF8
+#define HSMP_IOCTL_CMD _IOWR(HSMP_BASE_IOCTL_NR, 0, struct hsmp_message)
+#endif
diff --git a/sysroots/i686-linux-musl/include/asm-x86/asm/processor-flags.h b/sysroots/i686-linux-musl/include/asm-x86/asm/processor-flags.h
index 85f9d7e..0a95afd 100644
--- a/sysroots/i686-linux-musl/include/asm-x86/asm/processor-flags.h
+++ b/sysroots/i686-linux-musl/include/asm-x86/asm/processor-flags.h
@@ -127,6 +127,8 @@
 #define X86_CR4_SMAP _BITUL(X86_CR4_SMAP_BIT)
 #define X86_CR4_PKE_BIT 22
 #define X86_CR4_PKE _BITUL(X86_CR4_PKE_BIT)
+#define X86_CR4_CET_BIT 23
+#define X86_CR4_CET _BITUL(X86_CR4_CET_BIT)
 #define X86_CR8_TPR _AC(0x0000000f, UL)
 #define CX86_PCR0 0x20
 #define CX86_GCR 0xb8
diff --git a/sysroots/i686-linux-musl/include/asm-x86/asm/shmbuf.h b/sysroots/i686-linux-musl/include/asm-x86/asm/shmbuf.h
index 03e195e..2a0dcb5 100644
--- a/sysroots/i686-linux-musl/include/asm-x86/asm/shmbuf.h
+++ b/sysroots/i686-linux-musl/include/asm-x86/asm/shmbuf.h
@@ -21,9 +21,11 @@
 #if !defined(__x86_64__) || !defined(__ILP32__)
 #include <asm-generic/shmbuf.h>
 #else
+#include <asm/ipcbuf.h>
+#include <asm/posix_types.h>
 struct shmid64_ds {
   struct ipc64_perm shm_perm;
-  size_t shm_segsz;
+  __kernel_size_t shm_segsz;
   __kernel_long_t shm_atime;
   __kernel_long_t shm_dtime;
   __kernel_long_t shm_ctime;
diff --git a/sysroots/i686-linux-musl/include/asm-x86/asm/signal.h b/sysroots/i686-linux-musl/include/asm-x86/asm/signal.h
index 8226da8..cbeeac4 100644
--- a/sysroots/i686-linux-musl/include/asm-x86/asm/signal.h
+++ b/sysroots/i686-linux-musl/include/asm-x86/asm/signal.h
@@ -90,7 +90,7 @@
 typedef struct sigaltstack {
   void __user * ss_sp;
   int ss_flags;
-  size_t ss_size;
+  __kernel_size_t ss_size;
 } stack_t;
 #endif
 #endif
diff --git a/sysroots/i686-linux-musl/include/asm/amd_hsmp.h b/sysroots/i686-linux-musl/include/asm/amd_hsmp.h
new file mode 100644
index 0000000..ed59bb8
--- /dev/null
+++ b/sysroots/i686-linux-musl/include/asm/amd_hsmp.h
@@ -0,0 +1,136 @@
+/****************************************************************************
+ ****************************************************************************
+ ***
+ ***   This header was automatically generated from a Linux kernel header
+ ***   of the same name, to make information necessary for userspace to
+ ***   call into the kernel available to libc.  It contains only constants,
+ ***   structures, and macros generated from the original header, and thus,
+ ***   contains no copyrightable information.
+ ***
+ ***   To edit the content of this header, modify the corresponding
+ ***   source file (e.g. under external/kernel-headers/original/) then
+ ***   run bionic/libc/kernel/tools/update_all.py
+ ***
+ ***   Any manual change here will be lost the next time this script will
+ ***   be run. You've been warned!
+ ***
+ ****************************************************************************
+ ****************************************************************************/
+#ifndef _UAPI_ASM_X86_AMD_HSMP_H_
+#define _UAPI_ASM_X86_AMD_HSMP_H_
+#include <linux/types.h>
+#pragma pack(4)
+#define HSMP_MAX_MSG_LEN 8
+enum hsmp_message_ids {
+  HSMP_TEST = 1,
+  HSMP_GET_SMU_VER,
+  HSMP_GET_PROTO_VER,
+  HSMP_GET_SOCKET_POWER,
+  HSMP_SET_SOCKET_POWER_LIMIT,
+  HSMP_GET_SOCKET_POWER_LIMIT,
+  HSMP_GET_SOCKET_POWER_LIMIT_MAX,
+  HSMP_SET_BOOST_LIMIT,
+  HSMP_SET_BOOST_LIMIT_SOCKET,
+  HSMP_GET_BOOST_LIMIT,
+  HSMP_GET_PROC_HOT,
+  HSMP_SET_XGMI_LINK_WIDTH,
+  HSMP_SET_DF_PSTATE,
+  HSMP_SET_AUTO_DF_PSTATE,
+  HSMP_GET_FCLK_MCLK,
+  HSMP_GET_CCLK_THROTTLE_LIMIT,
+  HSMP_GET_C0_PERCENT,
+  HSMP_SET_NBIO_DPM_LEVEL,
+  HSMP_GET_DDR_BANDWIDTH = 0x14,
+  HSMP_GET_TEMP_MONITOR,
+  HSMP_MSG_ID_MAX,
+};
+struct hsmp_message {
+  __u32 msg_id;
+  __u16 num_args;
+  __u16 response_sz;
+  __u32 args[HSMP_MAX_MSG_LEN];
+  __u16 sock_ind;
+};
+enum hsmp_msg_type {
+  HSMP_RSVD = - 1,
+  HSMP_SET = 0,
+  HSMP_GET = 1,
+};
+struct hsmp_msg_desc {
+  int num_args;
+  int response_sz;
+  enum hsmp_msg_type type;
+};
+static const struct hsmp_msg_desc hsmp_msg_desc_table[] = {
+ {
+    0, 0, HSMP_RSVD
+  }
+ , {
+    1, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    1, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    0, 0, HSMP_SET
+  }
+ , {
+    0, 2, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    0, 0, HSMP_RSVD
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ ,
+};
+#pragma pack()
+#define HSMP_BASE_IOCTL_NR 0xF8
+#define HSMP_IOCTL_CMD _IOWR(HSMP_BASE_IOCTL_NR, 0, struct hsmp_message)
+#endif
diff --git a/sysroots/i686-linux-musl/include/asm/processor-flags.h b/sysroots/i686-linux-musl/include/asm/processor-flags.h
index 85f9d7e..0a95afd 100644
--- a/sysroots/i686-linux-musl/include/asm/processor-flags.h
+++ b/sysroots/i686-linux-musl/include/asm/processor-flags.h
@@ -127,6 +127,8 @@
 #define X86_CR4_SMAP _BITUL(X86_CR4_SMAP_BIT)
 #define X86_CR4_PKE_BIT 22
 #define X86_CR4_PKE _BITUL(X86_CR4_PKE_BIT)
+#define X86_CR4_CET_BIT 23
+#define X86_CR4_CET _BITUL(X86_CR4_CET_BIT)
 #define X86_CR8_TPR _AC(0x0000000f, UL)
 #define CX86_PCR0 0x20
 #define CX86_GCR 0xb8
diff --git a/sysroots/i686-linux-musl/include/asm/shmbuf.h b/sysroots/i686-linux-musl/include/asm/shmbuf.h
index 03e195e..2a0dcb5 100644
--- a/sysroots/i686-linux-musl/include/asm/shmbuf.h
+++ b/sysroots/i686-linux-musl/include/asm/shmbuf.h
@@ -21,9 +21,11 @@
 #if !defined(__x86_64__) || !defined(__ILP32__)
 #include <asm-generic/shmbuf.h>
 #else
+#include <asm/ipcbuf.h>
+#include <asm/posix_types.h>
 struct shmid64_ds {
   struct ipc64_perm shm_perm;
-  size_t shm_segsz;
+  __kernel_size_t shm_segsz;
   __kernel_long_t shm_atime;
   __kernel_long_t shm_dtime;
   __kernel_long_t shm_ctime;
diff --git a/sysroots/i686-linux-musl/include/asm/signal.h b/sysroots/i686-linux-musl/include/asm/signal.h
index 8226da8..cbeeac4 100644
--- a/sysroots/i686-linux-musl/include/asm/signal.h
+++ b/sysroots/i686-linux-musl/include/asm/signal.h
@@ -90,7 +90,7 @@
 typedef struct sigaltstack {
   void __user * ss_sp;
   int ss_flags;
-  size_t ss_size;
+  __kernel_size_t ss_size;
 } stack_t;
 #endif
 #endif
diff --git a/sysroots/i686-linux-musl/include/bits/syscall.h b/sysroots/i686-linux-musl/include/bits/syscall.h
index 31f0241..602276f 100644
--- a/sysroots/i686-linux-musl/include/bits/syscall.h
+++ b/sysroots/i686-linux-musl/include/bits/syscall.h
@@ -431,6 +431,11 @@
 #define __NR_pidfd_getfd	438
 #define __NR_faccessat2		439
 #define __NR_process_madvise	440
+#define __NR_epoll_pwait2	441
+#define __NR_mount_setattr	442
+#define __NR_landlock_create_ruleset	444
+#define __NR_landlock_add_rule	445
+#define __NR_landlock_restrict_self	446
 
 #define SYS_restart_syscall      0
 #define SYS_exit		  1
@@ -863,3 +868,8 @@
 #define SYS_pidfd_getfd	438
 #define SYS_faccessat2		439
 #define SYS_process_madvise	440
+#define SYS_epoll_pwait2	441
+#define SYS_mount_setattr	442
+#define SYS_landlock_create_ruleset	444
+#define SYS_landlock_add_rule	445
+#define SYS_landlock_restrict_self	446
diff --git a/sysroots/i686-linux-musl/include/bits/syscall.h.in b/sysroots/i686-linux-musl/include/bits/syscall.h.in
index 5d1c4d7..46ffe1d 100644
--- a/sysroots/i686-linux-musl/include/bits/syscall.h.in
+++ b/sysroots/i686-linux-musl/include/bits/syscall.h.in
@@ -431,4 +431,9 @@
 #define __NR_pidfd_getfd	438
 #define __NR_faccessat2		439
 #define __NR_process_madvise	440
+#define __NR_epoll_pwait2	441
+#define __NR_mount_setattr	442
+#define __NR_landlock_create_ruleset	444
+#define __NR_landlock_add_rule	445
+#define __NR_landlock_restrict_self	446
 
diff --git a/sysroots/i686-linux-musl/include/drm/amdgpu_drm.h b/sysroots/i686-linux-musl/include/drm/amdgpu_drm.h
index 3764d51..f38b612 100644
--- a/sysroots/i686-linux-musl/include/drm/amdgpu_drm.h
+++ b/sysroots/i686-linux-musl/include/drm/amdgpu_drm.h
@@ -112,6 +112,8 @@
 #define AMDGPU_CTX_OP_FREE_CTX 2
 #define AMDGPU_CTX_OP_QUERY_STATE 3
 #define AMDGPU_CTX_OP_QUERY_STATE2 4
+#define AMDGPU_CTX_OP_GET_STABLE_PSTATE 5
+#define AMDGPU_CTX_OP_SET_STABLE_PSTATE 6
 #define AMDGPU_CTX_NO_RESET 0
 #define AMDGPU_CTX_GUILTY_RESET 1
 #define AMDGPU_CTX_INNOCENT_RESET 2
@@ -127,6 +129,12 @@
 #define AMDGPU_CTX_PRIORITY_NORMAL 0
 #define AMDGPU_CTX_PRIORITY_HIGH 512
 #define AMDGPU_CTX_PRIORITY_VERY_HIGH 1023
+#define AMDGPU_CTX_STABLE_PSTATE_FLAGS_MASK 0xf
+#define AMDGPU_CTX_STABLE_PSTATE_NONE 0
+#define AMDGPU_CTX_STABLE_PSTATE_STANDARD 1
+#define AMDGPU_CTX_STABLE_PSTATE_MIN_SCLK 2
+#define AMDGPU_CTX_STABLE_PSTATE_MIN_MCLK 3
+#define AMDGPU_CTX_STABLE_PSTATE_PEAK 4
 struct drm_amdgpu_ctx_in {
   __u32 op;
   __u32 flags;
@@ -143,6 +151,10 @@
     __u32 hangs;
     __u32 reset_status;
   } state;
+  struct {
+    __u32 flags;
+    __u32 _pad;
+  } pstate;
 };
 union drm_amdgpu_ctx {
   struct drm_amdgpu_ctx_in in;
@@ -438,6 +450,7 @@
 #define AMDGPU_INFO_FW_TA 0x13
 #define AMDGPU_INFO_FW_DMCUB 0x14
 #define AMDGPU_INFO_FW_TOC 0x15
+#define AMDGPU_INFO_FW_CAP 0x16
 #define AMDGPU_INFO_NUM_BYTES_MOVED 0x0f
 #define AMDGPU_INFO_VRAM_USAGE 0x10
 #define AMDGPU_INFO_GTT_USAGE 0x11
@@ -682,6 +695,8 @@
 #define AMDGPU_FAMILY_NV 143
 #define AMDGPU_FAMILY_VGH 144
 #define AMDGPU_FAMILY_YC 146
+#define AMDGPU_FAMILY_GC_10_3_6 149
+#define AMDGPU_FAMILY_GC_10_3_7 151
 #ifdef __cplusplus
 }
 #endif
diff --git a/sysroots/i686-linux-musl/include/drm/msm_drm.h b/sysroots/i686-linux-musl/include/drm/msm_drm.h
index b4ba1d0..376f909 100644
--- a/sysroots/i686-linux-musl/include/drm/msm_drm.h
+++ b/sysroots/i686-linux-musl/include/drm/msm_drm.h
@@ -43,6 +43,7 @@
 #define MSM_PARAM_PP_PGTABLE 0x08
 #define MSM_PARAM_FAULTS 0x09
 #define MSM_PARAM_SUSPENDS 0x0a
+#define MSM_PARAM_SYSPROF 0x0b
 #define MSM_PARAM_NR_RINGS MSM_PARAM_PRIORITIES
 struct drm_msm_param {
   __u32 pipe;
@@ -119,7 +120,8 @@
 #define MSM_SUBMIT_SUDO 0x10000000
 #define MSM_SUBMIT_SYNCOBJ_IN 0x08000000
 #define MSM_SUBMIT_SYNCOBJ_OUT 0x04000000
-#define MSM_SUBMIT_FLAGS (MSM_SUBMIT_NO_IMPLICIT | MSM_SUBMIT_FENCE_FD_IN | MSM_SUBMIT_FENCE_FD_OUT | MSM_SUBMIT_SUDO | MSM_SUBMIT_SYNCOBJ_IN | MSM_SUBMIT_SYNCOBJ_OUT | 0)
+#define MSM_SUBMIT_FENCE_SN_IN 0x02000000
+#define MSM_SUBMIT_FLAGS (MSM_SUBMIT_NO_IMPLICIT | MSM_SUBMIT_FENCE_FD_IN | MSM_SUBMIT_FENCE_FD_OUT | MSM_SUBMIT_SUDO | MSM_SUBMIT_SYNCOBJ_IN | MSM_SUBMIT_SYNCOBJ_OUT | MSM_SUBMIT_FENCE_SN_IN | 0)
 #define MSM_SUBMIT_SYNCOBJ_RESET 0x00000001
 #define MSM_SUBMIT_SYNCOBJ_FLAGS (MSM_SUBMIT_SYNCOBJ_RESET | 0)
 struct drm_msm_gem_submit_syncobj {
@@ -172,6 +174,7 @@
   __u32 pad;
 };
 #define DRM_MSM_GET_PARAM 0x00
+#define DRM_MSM_SET_PARAM 0x01
 #define DRM_MSM_GEM_NEW 0x02
 #define DRM_MSM_GEM_INFO 0x03
 #define DRM_MSM_GEM_CPU_PREP 0x04
@@ -183,6 +186,7 @@
 #define DRM_MSM_SUBMITQUEUE_CLOSE 0x0B
 #define DRM_MSM_SUBMITQUEUE_QUERY 0x0C
 #define DRM_IOCTL_MSM_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GET_PARAM, struct drm_msm_param)
+#define DRM_IOCTL_MSM_SET_PARAM DRM_IOW(DRM_COMMAND_BASE + DRM_MSM_SET_PARAM, struct drm_msm_param)
 #define DRM_IOCTL_MSM_GEM_NEW DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_NEW, struct drm_msm_gem_new)
 #define DRM_IOCTL_MSM_GEM_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_INFO, struct drm_msm_gem_info)
 #define DRM_IOCTL_MSM_GEM_CPU_PREP DRM_IOW(DRM_COMMAND_BASE + DRM_MSM_GEM_CPU_PREP, struct drm_msm_gem_cpu_prep)
diff --git a/sysroots/i686-linux-musl/include/elf.h b/sysroots/i686-linux-musl/include/elf.h
index 5170f3e..86e2f0b 100644
--- a/sysroots/i686-linux-musl/include/elf.h
+++ b/sysroots/i686-linux-musl/include/elf.h
@@ -687,6 +687,7 @@
 #define NT_ARM_PACA_KEYS	0x407
 #define NT_ARM_PACG_KEYS	0x408
 #define NT_ARM_TAGGED_ADDR_CTRL	0x409
+#define NT_ARM_PAC_ENABLED_KEYS	0x40a
 #define NT_METAG_CBUF	0x500
 #define NT_METAG_RPIPE	0x501
 #define NT_METAG_TLS	0x502
diff --git a/sysroots/i686-linux-musl/include/linux/android/binder.h b/sysroots/i686-linux-musl/include/linux/android/binder.h
index ded1756..34ccf44 100644
--- a/sysroots/i686-linux-musl/include/linux/android/binder.h
+++ b/sysroots/i686-linux-musl/include/linux/android/binder.h
@@ -155,7 +155,11 @@
   binder_uintptr_t cookie;
   __u32 code;
   __u32 flags;
-  pid_t sender_pid;
+  __kernel_pid_t sender_pid;
+  /* Modified to __kernel_uid_t in the headers but this is not the same size
+   * as uid_t on 32 bit systems. This is fixed in upstream, but wait until
+   * 5.19 to get the fix. See b/234125620.
+   */
   uid_t sender_euid;
   binder_size_t data_size;
   binder_size_t offsets_size;
diff --git a/sysroots/i686-linux-musl/include/linux/bpf.h b/sysroots/i686-linux-musl/include/linux/bpf.h
index d363e81..8de48a1 100644
--- a/sysroots/i686-linux-musl/include/linux/bpf.h
+++ b/sysroots/i686-linux-musl/include/linux/bpf.h
@@ -228,6 +228,7 @@
   BPF_SK_REUSEPORT_SELECT,
   BPF_SK_REUSEPORT_SELECT_OR_MIGRATE,
   BPF_PERF_EVENT,
+  BPF_TRACE_KPROBE_MULTI,
   __MAX_BPF_ATTACH_TYPE
 };
 #define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
@@ -240,6 +241,7 @@
   BPF_LINK_TYPE_NETNS = 5,
   BPF_LINK_TYPE_XDP = 6,
   BPF_LINK_TYPE_PERF_EVENT = 7,
+  BPF_LINK_TYPE_KPROBE_MULTI = 8,
   MAX_BPF_LINK_TYPE,
 };
 #define BPF_F_ALLOW_OVERRIDE (1U << 0)
@@ -250,6 +252,8 @@
 #define BPF_F_TEST_RND_HI32 (1U << 2)
 #define BPF_F_TEST_STATE_FREQ (1U << 3)
 #define BPF_F_SLEEPABLE (1U << 4)
+#define BPF_F_XDP_HAS_FRAGS (1U << 5)
+#define BPF_F_KPROBE_MULTI_RETURN (1U << 0)
 #define BPF_PSEUDO_MAP_FD 1
 #define BPF_PSEUDO_MAP_IDX 5
 #define BPF_PSEUDO_MAP_VALUE 2
@@ -281,6 +285,7 @@
 };
 #define BPF_F_QUERY_EFFECTIVE (1U << 0)
 #define BPF_F_TEST_RUN_ON_CPU (1U << 0)
+#define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1)
 enum bpf_stats_type {
   BPF_STATS_RUN_TIME = 0,
 };
@@ -392,6 +397,7 @@
     __aligned_u64 ctx_out;
     __u32 flags;
     __u32 cpu;
+    __u32 batch_size;
   } test;
   struct {
     union {
@@ -456,6 +462,13 @@
       struct {
         __u64 bpf_cookie;
       } perf_event;
+      struct {
+        __u32 flags;
+        __u32 cnt;
+        __aligned_u64 syms;
+        __aligned_u64 addrs;
+        __aligned_u64 cookies;
+      } kprobe_multi;
     };
   } link_create;
   struct {
@@ -480,7 +493,7 @@
     __u32 flags;
   } prog_bind_map;
 } __attribute__((aligned(8)));
-#define __BPF_FUNC_MAPPER(FN) FN(unspec), FN(map_lookup_elem), FN(map_update_elem), FN(map_delete_elem), FN(probe_read), FN(ktime_get_ns), FN(trace_printk), FN(get_prandom_u32), FN(get_smp_processor_id), FN(skb_store_bytes), FN(l3_csum_replace), FN(l4_csum_replace), FN(tail_call), FN(clone_redirect), FN(get_current_pid_tgid), FN(get_current_uid_gid), FN(get_current_comm), FN(get_cgroup_classid), FN(skb_vlan_push), FN(skb_vlan_pop), FN(skb_get_tunnel_key), FN(skb_set_tunnel_key), FN(perf_event_read), FN(redirect), FN(get_route_realm), FN(perf_event_output), FN(skb_load_bytes), FN(get_stackid), FN(csum_diff), FN(skb_get_tunnel_opt), FN(skb_set_tunnel_opt), FN(skb_change_proto), FN(skb_change_type), FN(skb_under_cgroup), FN(get_hash_recalc), FN(get_current_task), FN(probe_write_user), FN(current_task_under_cgroup), FN(skb_change_tail), FN(skb_pull_data), FN(csum_update), FN(set_hash_invalid), FN(get_numa_node_id), FN(skb_change_head), FN(xdp_adjust_head), FN(probe_read_str), FN(get_socket_cookie), FN(get_socket_uid), FN(set_hash), FN(setsockopt), FN(skb_adjust_room), FN(redirect_map), FN(sk_redirect_map), FN(sock_map_update), FN(xdp_adjust_meta), FN(perf_event_read_value), FN(perf_prog_read_value), FN(getsockopt), FN(override_return), FN(sock_ops_cb_flags_set), FN(msg_redirect_map), FN(msg_apply_bytes), FN(msg_cork_bytes), FN(msg_pull_data), FN(bind), FN(xdp_adjust_tail), FN(skb_get_xfrm_state), FN(get_stack), FN(skb_load_bytes_relative), FN(fib_lookup), FN(sock_hash_update), FN(msg_redirect_hash), FN(sk_redirect_hash), FN(lwt_push_encap), FN(lwt_seg6_store_bytes), FN(lwt_seg6_adjust_srh), FN(lwt_seg6_action), FN(rc_repeat), FN(rc_keydown), FN(skb_cgroup_id), FN(get_current_cgroup_id), FN(get_local_storage), FN(sk_select_reuseport), FN(skb_ancestor_cgroup_id), FN(sk_lookup_tcp), FN(sk_lookup_udp), FN(sk_release), FN(map_push_elem), FN(map_pop_elem), FN(map_peek_elem), FN(msg_push_data), FN(msg_pop_data), FN(rc_pointer_rel), FN(spin_lock), FN(spin_unlock), FN(sk_fullsock), FN(tcp_sock), FN(skb_ecn_set_ce), FN(get_listener_sock), FN(skc_lookup_tcp), FN(tcp_check_syncookie), FN(sysctl_get_name), FN(sysctl_get_current_value), FN(sysctl_get_new_value), FN(sysctl_set_new_value), FN(strtol), FN(strtoul), FN(sk_storage_get), FN(sk_storage_delete), FN(send_signal), FN(tcp_gen_syncookie), FN(skb_output), FN(probe_read_user), FN(probe_read_kernel), FN(probe_read_user_str), FN(probe_read_kernel_str), FN(tcp_send_ack), FN(send_signal_thread), FN(jiffies64), FN(read_branch_records), FN(get_ns_current_pid_tgid), FN(xdp_output), FN(get_netns_cookie), FN(get_current_ancestor_cgroup_id), FN(sk_assign), FN(ktime_get_boot_ns), FN(seq_printf), FN(seq_write), FN(sk_cgroup_id), FN(sk_ancestor_cgroup_id), FN(ringbuf_output), FN(ringbuf_reserve), FN(ringbuf_submit), FN(ringbuf_discard), FN(ringbuf_query), FN(csum_level), FN(skc_to_tcp6_sock), FN(skc_to_tcp_sock), FN(skc_to_tcp_timewait_sock), FN(skc_to_tcp_request_sock), FN(skc_to_udp6_sock), FN(get_task_stack), FN(load_hdr_opt), FN(store_hdr_opt), FN(reserve_hdr_opt), FN(inode_storage_get), FN(inode_storage_delete), FN(d_path), FN(copy_from_user), FN(snprintf_btf), FN(seq_printf_btf), FN(skb_cgroup_classid), FN(redirect_neigh), FN(per_cpu_ptr), FN(this_cpu_ptr), FN(redirect_peer), FN(task_storage_get), FN(task_storage_delete), FN(get_current_task_btf), FN(bprm_opts_set), FN(ktime_get_coarse_ns), FN(ima_inode_hash), FN(sock_from_file), FN(check_mtu), FN(for_each_map_elem), FN(snprintf), FN(sys_bpf), FN(btf_find_by_name_kind), FN(sys_close), FN(timer_init), FN(timer_set_callback), FN(timer_start), FN(timer_cancel), FN(get_func_ip), FN(get_attach_cookie), FN(task_pt_regs), FN(get_branch_snapshot), FN(trace_vprintk), FN(skc_to_unix_sock), FN(kallsyms_lookup_name), FN(find_vma), FN(loop), FN(strncmp), FN(get_func_arg), FN(get_func_ret), FN(get_func_arg_cnt),
+#define __BPF_FUNC_MAPPER(FN) FN(unspec), FN(map_lookup_elem), FN(map_update_elem), FN(map_delete_elem), FN(probe_read), FN(ktime_get_ns), FN(trace_printk), FN(get_prandom_u32), FN(get_smp_processor_id), FN(skb_store_bytes), FN(l3_csum_replace), FN(l4_csum_replace), FN(tail_call), FN(clone_redirect), FN(get_current_pid_tgid), FN(get_current_uid_gid), FN(get_current_comm), FN(get_cgroup_classid), FN(skb_vlan_push), FN(skb_vlan_pop), FN(skb_get_tunnel_key), FN(skb_set_tunnel_key), FN(perf_event_read), FN(redirect), FN(get_route_realm), FN(perf_event_output), FN(skb_load_bytes), FN(get_stackid), FN(csum_diff), FN(skb_get_tunnel_opt), FN(skb_set_tunnel_opt), FN(skb_change_proto), FN(skb_change_type), FN(skb_under_cgroup), FN(get_hash_recalc), FN(get_current_task), FN(probe_write_user), FN(current_task_under_cgroup), FN(skb_change_tail), FN(skb_pull_data), FN(csum_update), FN(set_hash_invalid), FN(get_numa_node_id), FN(skb_change_head), FN(xdp_adjust_head), FN(probe_read_str), FN(get_socket_cookie), FN(get_socket_uid), FN(set_hash), FN(setsockopt), FN(skb_adjust_room), FN(redirect_map), FN(sk_redirect_map), FN(sock_map_update), FN(xdp_adjust_meta), FN(perf_event_read_value), FN(perf_prog_read_value), FN(getsockopt), FN(override_return), FN(sock_ops_cb_flags_set), FN(msg_redirect_map), FN(msg_apply_bytes), FN(msg_cork_bytes), FN(msg_pull_data), FN(bind), FN(xdp_adjust_tail), FN(skb_get_xfrm_state), FN(get_stack), FN(skb_load_bytes_relative), FN(fib_lookup), FN(sock_hash_update), FN(msg_redirect_hash), FN(sk_redirect_hash), FN(lwt_push_encap), FN(lwt_seg6_store_bytes), FN(lwt_seg6_adjust_srh), FN(lwt_seg6_action), FN(rc_repeat), FN(rc_keydown), FN(skb_cgroup_id), FN(get_current_cgroup_id), FN(get_local_storage), FN(sk_select_reuseport), FN(skb_ancestor_cgroup_id), FN(sk_lookup_tcp), FN(sk_lookup_udp), FN(sk_release), FN(map_push_elem), FN(map_pop_elem), FN(map_peek_elem), FN(msg_push_data), FN(msg_pop_data), FN(rc_pointer_rel), FN(spin_lock), FN(spin_unlock), FN(sk_fullsock), FN(tcp_sock), FN(skb_ecn_set_ce), FN(get_listener_sock), FN(skc_lookup_tcp), FN(tcp_check_syncookie), FN(sysctl_get_name), FN(sysctl_get_current_value), FN(sysctl_get_new_value), FN(sysctl_set_new_value), FN(strtol), FN(strtoul), FN(sk_storage_get), FN(sk_storage_delete), FN(send_signal), FN(tcp_gen_syncookie), FN(skb_output), FN(probe_read_user), FN(probe_read_kernel), FN(probe_read_user_str), FN(probe_read_kernel_str), FN(tcp_send_ack), FN(send_signal_thread), FN(jiffies64), FN(read_branch_records), FN(get_ns_current_pid_tgid), FN(xdp_output), FN(get_netns_cookie), FN(get_current_ancestor_cgroup_id), FN(sk_assign), FN(ktime_get_boot_ns), FN(seq_printf), FN(seq_write), FN(sk_cgroup_id), FN(sk_ancestor_cgroup_id), FN(ringbuf_output), FN(ringbuf_reserve), FN(ringbuf_submit), FN(ringbuf_discard), FN(ringbuf_query), FN(csum_level), FN(skc_to_tcp6_sock), FN(skc_to_tcp_sock), FN(skc_to_tcp_timewait_sock), FN(skc_to_tcp_request_sock), FN(skc_to_udp6_sock), FN(get_task_stack), FN(load_hdr_opt), FN(store_hdr_opt), FN(reserve_hdr_opt), FN(inode_storage_get), FN(inode_storage_delete), FN(d_path), FN(copy_from_user), FN(snprintf_btf), FN(seq_printf_btf), FN(skb_cgroup_classid), FN(redirect_neigh), FN(per_cpu_ptr), FN(this_cpu_ptr), FN(redirect_peer), FN(task_storage_get), FN(task_storage_delete), FN(get_current_task_btf), FN(bprm_opts_set), FN(ktime_get_coarse_ns), FN(ima_inode_hash), FN(sock_from_file), FN(check_mtu), FN(for_each_map_elem), FN(snprintf), FN(sys_bpf), FN(btf_find_by_name_kind), FN(sys_close), FN(timer_init), FN(timer_set_callback), FN(timer_start), FN(timer_cancel), FN(get_func_ip), FN(get_attach_cookie), FN(task_pt_regs), FN(get_branch_snapshot), FN(trace_vprintk), FN(skc_to_unix_sock), FN(kallsyms_lookup_name), FN(find_vma), FN(loop), FN(strncmp), FN(get_func_arg), FN(get_func_ret), FN(get_func_arg_cnt), FN(get_retval), FN(set_retval), FN(xdp_get_buff_len), FN(xdp_load_bytes), FN(xdp_store_bytes), FN(copy_from_user_task), FN(skb_set_tstamp), FN(ima_file_hash),
 #define __BPF_ENUM_FN(x) BPF_FUNC_ ##x
 enum bpf_func_id {
   __BPF_FUNC_MAPPER(__BPF_ENUM_FN) __BPF_FUNC_MAX_ID,
@@ -595,6 +608,10 @@
 };
 #define __bpf_md_ptr(type,name) union { type name; __u64 : 64; \
 } __attribute__((aligned(8)))
+enum {
+  BPF_SKB_TSTAMP_UNSPEC,
+  BPF_SKB_TSTAMP_DELIVERY_MONO,
+};
 struct __sk_buff {
   __u32 len;
   __u32 pkt_type;
@@ -628,7 +645,8 @@
   __u32 gso_segs;
   __bpf_md_ptr(struct bpf_sock *, sk);
   __u32 gso_size;
-  __u32 : 32;
+  __u8 tstamp_type;
+  __u32 : 24;
   __u64 hwtstamp;
 };
 struct bpf_tunnel_key {
@@ -668,7 +686,8 @@
   __u32 src_ip4;
   __u32 src_ip6[4];
   __u32 src_port;
-  __u32 dst_port;
+  __be16 dst_port;
+  __u16 : 16;
   __u32 dst_ip4;
   __u32 dst_ip6[4];
   __u32 state;
@@ -1160,7 +1179,8 @@
   __u32 protocol;
   __u32 remote_ip4;
   __u32 remote_ip6[4];
-  __u32 remote_port;
+  __be16 remote_port;
+  __u16 : 16;
   __u32 local_ip4;
   __u32 local_ip6[4];
   __u32 local_port;
diff --git a/sysroots/i686-linux-musl/include/linux/btrfs.h b/sysroots/i686-linux-musl/include/linux/btrfs.h
index 08b96a3..9f76d52 100644
--- a/sysroots/i686-linux-musl/include/linux/btrfs.h
+++ b/sysroots/i686-linux-musl/include/linux/btrfs.h
@@ -189,6 +189,7 @@
 #define BTRFS_FEATURE_INCOMPAT_METADATA_UUID (1ULL << 10)
 #define BTRFS_FEATURE_INCOMPAT_RAID1C34 (1ULL << 11)
 #define BTRFS_FEATURE_INCOMPAT_ZONED (1ULL << 12)
+#define BTRFS_FEATURE_INCOMPAT_EXTENT_TREE_V2 (1ULL << 13)
 struct btrfs_ioctl_feature_flags {
   __u64 compat_flags;
   __u64 compat_ro_flags;
@@ -461,6 +462,29 @@
   __u8 num_items;
   __u8 align[7];
 };
+struct btrfs_ioctl_encoded_io_args {
+  const struct iovec __user * iov;
+  unsigned long iovcnt;
+  __s64 offset;
+  __u64 flags;
+  __u64 len;
+  __u64 unencoded_len;
+  __u64 unencoded_offset;
+  __u32 compression;
+  __u32 encryption;
+  __u8 reserved[64];
+};
+#define BTRFS_ENCODED_IO_COMPRESSION_NONE 0
+#define BTRFS_ENCODED_IO_COMPRESSION_ZLIB 1
+#define BTRFS_ENCODED_IO_COMPRESSION_ZSTD 2
+#define BTRFS_ENCODED_IO_COMPRESSION_LZO_4K 3
+#define BTRFS_ENCODED_IO_COMPRESSION_LZO_8K 4
+#define BTRFS_ENCODED_IO_COMPRESSION_LZO_16K 5
+#define BTRFS_ENCODED_IO_COMPRESSION_LZO_32K 6
+#define BTRFS_ENCODED_IO_COMPRESSION_LZO_64K 7
+#define BTRFS_ENCODED_IO_COMPRESSION_TYPES 8
+#define BTRFS_ENCODED_IO_ENCRYPTION_NONE 0
+#define BTRFS_ENCODED_IO_ENCRYPTION_TYPES 1
 enum btrfs_err_code {
   BTRFS_ERROR_DEV_RAID1_MIN_NOT_MET = 1,
   BTRFS_ERROR_DEV_RAID10_MIN_NOT_MET,
@@ -534,4 +558,6 @@
 #define BTRFS_IOC_GET_SUBVOL_ROOTREF _IOWR(BTRFS_IOCTL_MAGIC, 61, struct btrfs_ioctl_get_subvol_rootref_args)
 #define BTRFS_IOC_INO_LOOKUP_USER _IOWR(BTRFS_IOCTL_MAGIC, 62, struct btrfs_ioctl_ino_lookup_user_args)
 #define BTRFS_IOC_SNAP_DESTROY_V2 _IOW(BTRFS_IOCTL_MAGIC, 63, struct btrfs_ioctl_vol_args_v2)
+#define BTRFS_IOC_ENCODED_READ _IOR(BTRFS_IOCTL_MAGIC, 64, struct btrfs_ioctl_encoded_io_args)
+#define BTRFS_IOC_ENCODED_WRITE _IOW(BTRFS_IOCTL_MAGIC, 64, struct btrfs_ioctl_encoded_io_args)
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/btrfs_tree.h b/sysroots/i686-linux-musl/include/linux/btrfs_tree.h
index 0476733..8e3c6fe 100644
--- a/sysroots/i686-linux-musl/include/linux/btrfs_tree.h
+++ b/sysroots/i686-linux-musl/include/linux/btrfs_tree.h
@@ -31,6 +31,7 @@
 #define BTRFS_QUOTA_TREE_OBJECTID 8ULL
 #define BTRFS_UUID_TREE_OBJECTID 9ULL
 #define BTRFS_FREE_SPACE_TREE_OBJECTID 10ULL
+#define BTRFS_BLOCK_GROUP_TREE_OBJECTID 11ULL
 #define BTRFS_DEV_STATS_OBJECTID 0ULL
 #define BTRFS_BALANCE_OBJECTID - 4ULL
 #define BTRFS_ORPHAN_OBJECTID - 5ULL
diff --git a/sysroots/i686-linux-musl/include/linux/can/isotp.h b/sysroots/i686-linux-musl/include/linux/can/isotp.h
index dd5e4f5..57d3001 100644
--- a/sysroots/i686-linux-musl/include/linux/can/isotp.h
+++ b/sysroots/i686-linux-musl/include/linux/can/isotp.h
@@ -59,11 +59,12 @@
 #define CAN_ISOTP_DEFAULT_FLAGS 0
 #define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00
 #define CAN_ISOTP_DEFAULT_PAD_CONTENT 0xCC
-#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 0
+#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 50000
 #define CAN_ISOTP_DEFAULT_RECV_BS 0
 #define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00
 #define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0
 #define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU
 #define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN
 #define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0
+#define CAN_ISOTP_FRAME_TXTIME_ZERO 0xFFFFFFFF
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/counter.h b/sysroots/i686-linux-musl/include/linux/counter.h
index 091e33d..4b86b28 100644
--- a/sysroots/i686-linux-musl/include/linux/counter.h
+++ b/sysroots/i686-linux-musl/include/linux/counter.h
@@ -45,6 +45,7 @@
   COUNTER_EVENT_OVERFLOW_UNDERFLOW,
   COUNTER_EVENT_THRESHOLD,
   COUNTER_EVENT_INDEX,
+  COUNTER_EVENT_CHANGE_OF_STATE,
 };
 struct counter_watch {
   struct counter_component component;
diff --git a/sysroots/i686-linux-musl/include/linux/dm-ioctl.h b/sysroots/i686-linux-musl/include/linux/dm-ioctl.h
index 09f8a98..98cbc1f 100644
--- a/sysroots/i686-linux-musl/include/linux/dm-ioctl.h
+++ b/sysroots/i686-linux-musl/include/linux/dm-ioctl.h
@@ -106,9 +106,9 @@
 #define DM_TARGET_MSG _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, struct dm_ioctl)
 #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
 #define DM_VERSION_MAJOR 4
-#define DM_VERSION_MINOR 45
+#define DM_VERSION_MINOR 46
 #define DM_VERSION_PATCHLEVEL 0
-#define DM_VERSION_EXTRA "-ioctl(2021-03-22)"
+#define DM_VERSION_EXTRA "-ioctl(2022-02-22)"
 #define DM_READONLY_FLAG (1 << 0)
 #define DM_SUSPEND_FLAG (1 << 1)
 #define DM_PERSISTENT_DEV_FLAG (1 << 3)
diff --git a/sysroots/i686-linux-musl/include/linux/dma-buf.h b/sysroots/i686-linux-musl/include/linux/dma-buf.h
index 221c20f..4e31379 100644
--- a/sysroots/i686-linux-musl/include/linux/dma-buf.h
+++ b/sysroots/i686-linux-musl/include/linux/dma-buf.h
@@ -32,6 +32,6 @@
 #define DMA_BUF_BASE 'b'
 #define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)
 #define DMA_BUF_SET_NAME _IOW(DMA_BUF_BASE, 1, const char *)
-#define DMA_BUF_SET_NAME_A _IOW(DMA_BUF_BASE, 1, u32)
-#define DMA_BUF_SET_NAME_B _IOW(DMA_BUF_BASE, 1, u64)
+#define DMA_BUF_SET_NAME_A _IOW(DMA_BUF_BASE, 1, __u32)
+#define DMA_BUF_SET_NAME_B _IOW(DMA_BUF_BASE, 1, __u64)
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/elf.h b/sysroots/i686-linux-musl/include/linux/elf.h
index 7655f12..65ab245 100644
--- a/sysroots/i686-linux-musl/include/linux/elf.h
+++ b/sysroots/i686-linux-musl/include/linux/elf.h
@@ -45,9 +45,11 @@
 #define PT_HIOS 0x6fffffff
 #define PT_LOPROC 0x70000000
 #define PT_HIPROC 0x7fffffff
-#define PT_GNU_EH_FRAME 0x6474e550
-#define PT_GNU_PROPERTY 0x6474e553
+#define PT_GNU_EH_FRAME (PT_LOOS + 0x474e550)
 #define PT_GNU_STACK (PT_LOOS + 0x474e551)
+#define PT_GNU_RELRO (PT_LOOS + 0x474e552)
+#define PT_GNU_PROPERTY (PT_LOOS + 0x474e553)
+#define PT_AARCH64_MEMTAG_MTE (PT_LOPROC + 0x2)
 #define PN_XNUM 0xffff
 #define ET_NONE 0
 #define ET_REL 1
diff --git a/sysroots/i686-linux-musl/include/linux/ethtool_netlink.h b/sysroots/i686-linux-musl/include/linux/ethtool_netlink.h
index 7dcae22..8e1f38f 100644
--- a/sysroots/i686-linux-musl/include/linux/ethtool_netlink.h
+++ b/sysroots/i686-linux-musl/include/linux/ethtool_netlink.h
@@ -240,6 +240,11 @@
   ETHTOOL_A_PRIVFLAGS_MAX = __ETHTOOL_A_PRIVFLAGS_CNT - 1
 };
 enum {
+  ETHTOOL_TCP_DATA_SPLIT_UNKNOWN = 0,
+  ETHTOOL_TCP_DATA_SPLIT_DISABLED,
+  ETHTOOL_TCP_DATA_SPLIT_ENABLED,
+};
+enum {
   ETHTOOL_A_RINGS_UNSPEC,
   ETHTOOL_A_RINGS_HEADER,
   ETHTOOL_A_RINGS_RX_MAX,
@@ -251,6 +256,8 @@
   ETHTOOL_A_RINGS_RX_JUMBO,
   ETHTOOL_A_RINGS_TX,
   ETHTOOL_A_RINGS_RX_BUF_LEN,
+  ETHTOOL_A_RINGS_TCP_DATA_SPLIT,
+  ETHTOOL_A_RINGS_CQE_SIZE,
   __ETHTOOL_A_RINGS_CNT,
   ETHTOOL_A_RINGS_MAX = (__ETHTOOL_A_RINGS_CNT - 1)
 };
diff --git a/sysroots/i686-linux-musl/include/linux/fsi.h b/sysroots/i686-linux-musl/include/linux/fsi.h
index fc88464..b080c21 100644
--- a/sysroots/i686-linux-musl/include/linux/fsi.h
+++ b/sysroots/i686-linux-musl/include/linux/fsi.h
@@ -48,4 +48,5 @@
 #define FSI_SCOM_READ _IOWR('s', 0x01, struct scom_access)
 #define FSI_SCOM_WRITE _IOWR('s', 0x02, struct scom_access)
 #define FSI_SCOM_RESET _IOW('s', 0x03, __u32)
+#define FSI_SBEFIFO_READ_TIMEOUT_SECONDS _IOW('s', 0x00, __u32)
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/gtp.h b/sysroots/i686-linux-musl/include/linux/gtp.h
index 3b9416e..20bc3d6 100644
--- a/sysroots/i686-linux-musl/include/linux/gtp.h
+++ b/sysroots/i686-linux-musl/include/linux/gtp.h
@@ -23,6 +23,7 @@
   GTP_CMD_NEWPDP,
   GTP_CMD_DELPDP,
   GTP_CMD_GETPDP,
+  GTP_CMD_ECHOREQ,
   GTP_CMD_MAX,
 };
 enum gtp_version {
diff --git a/sysroots/i686-linux-musl/include/linux/if_addr.h b/sysroots/i686-linux-musl/include/linux/if_addr.h
index 6a6b640..a225e69 100644
--- a/sysroots/i686-linux-musl/include/linux/if_addr.h
+++ b/sysroots/i686-linux-musl/include/linux/if_addr.h
@@ -39,6 +39,7 @@
   IFA_FLAGS,
   IFA_RT_PRIORITY,
   IFA_TARGET_NETNSID,
+  IFA_PROTO,
   __IFA_MAX,
 };
 #define IFA_MAX (__IFA_MAX - 1)
@@ -63,4 +64,8 @@
 };
 #define IFA_RTA(r) ((struct rtattr *) (((char *) (r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg))))
 #define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n, sizeof(struct ifaddrmsg))
+#define IFAPROT_UNSPEC 0
+#define IFAPROT_KERNEL_LO 1
+#define IFAPROT_KERNEL_RA 2
+#define IFAPROT_KERNEL_LL 3
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/if_bridge.h b/sysroots/i686-linux-musl/include/linux/if_bridge.h
index 2054fb3..0f08866 100644
--- a/sysroots/i686-linux-musl/include/linux/if_bridge.h
+++ b/sysroots/i686-linux-musl/include/linux/if_bridge.h
@@ -108,6 +108,7 @@
   IFLA_BRIDGE_VLAN_TUNNEL_INFO,
   IFLA_BRIDGE_MRP,
   IFLA_BRIDGE_CFM,
+  IFLA_BRIDGE_MST,
   __IFLA_BRIDGE_MAX,
 };
 #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1)
@@ -384,6 +385,19 @@
   __IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX,
 };
 #define IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX (__IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX - 1)
+enum {
+  IFLA_BRIDGE_MST_UNSPEC,
+  IFLA_BRIDGE_MST_ENTRY,
+  __IFLA_BRIDGE_MST_MAX,
+};
+#define IFLA_BRIDGE_MST_MAX (__IFLA_BRIDGE_MST_MAX - 1)
+enum {
+  IFLA_BRIDGE_MST_ENTRY_UNSPEC,
+  IFLA_BRIDGE_MST_ENTRY_MSTI,
+  IFLA_BRIDGE_MST_ENTRY_STATE,
+  __IFLA_BRIDGE_MST_ENTRY_MAX,
+};
+#define IFLA_BRIDGE_MST_ENTRY_MAX (__IFLA_BRIDGE_MST_ENTRY_MAX - 1)
 struct bridge_stp_xstats {
   __u64 transition_blk;
   __u64 transition_fwd;
@@ -460,6 +474,7 @@
   BRIDGE_VLANDB_GOPTS_MCAST_QUERIER,
   BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS,
   BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE,
+  BRIDGE_VLANDB_GOPTS_MSTI,
   __BRIDGE_VLANDB_GOPTS_MAX
 };
 #define BRIDGE_VLANDB_GOPTS_MAX (__BRIDGE_VLANDB_GOPTS_MAX - 1)
@@ -599,6 +614,7 @@
 enum br_boolopt_id {
   BR_BOOLOPT_NO_LL_LEARN,
   BR_BOOLOPT_MCAST_VLAN_SNOOPING,
+  BR_BOOLOPT_MST_ENABLE,
   BR_BOOLOPT_MAX
 };
 struct br_boolopt_multi {
diff --git a/sysroots/i686-linux-musl/include/linux/if_ether.h b/sysroots/i686-linux-musl/include/linux/if_ether.h
index 1f7f8f2..bd8e045 100644
--- a/sysroots/i686-linux-musl/include/linux/if_ether.h
+++ b/sysroots/i686-linux-musl/include/linux/if_ether.h
@@ -67,8 +67,10 @@
 #define ETH_P_LINK_CTL 0x886c
 #define ETH_P_ATMFATE 0x8884
 #define ETH_P_PAE 0x888E
+#define ETH_P_PROFINET 0x8892
 #define ETH_P_REALTEK 0x8899
 #define ETH_P_AOE 0x88A2
+#define ETH_P_ETHERCAT 0x88A4
 #define ETH_P_8021AD 0x88A8
 #define ETH_P_802_EX1 0x88B5
 #define ETH_P_PREAUTH 0x88C7
diff --git a/sysroots/i686-linux-musl/include/linux/if_link.h b/sysroots/i686-linux-musl/include/linux/if_link.h
index 7e413ae..640fa50 100644
--- a/sysroots/i686-linux-musl/include/linux/if_link.h
+++ b/sysroots/i686-linux-musl/include/linux/if_link.h
@@ -72,6 +72,17 @@
   __u64 tx_compressed;
   __u64 rx_nohandler;
 };
+struct rtnl_hw_stats64 {
+  __u64 rx_packets;
+  __u64 tx_packets;
+  __u64 rx_bytes;
+  __u64 tx_bytes;
+  __u64 rx_errors;
+  __u64 tx_errors;
+  __u64 rx_dropped;
+  __u64 tx_dropped;
+  __u64 multicast;
+};
 struct rtnl_link_ifmap {
   __u64 mem_start;
   __u64 mem_end;
@@ -289,6 +300,7 @@
   IFLA_BRPORT_MRP_IN_OPEN,
   IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT,
   IFLA_BRPORT_MCAST_EHT_HOSTS_CNT,
+  IFLA_BRPORT_LOCKED,
   __IFLA_BRPORT_MAX
 };
 #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
@@ -428,6 +440,44 @@
 };
 #define IPVLAN_F_PRIVATE 0x01
 #define IPVLAN_F_VEPA 0x02
+struct tunnel_msg {
+  __u8 family;
+  __u8 flags;
+  __u16 reserved2;
+  __u32 ifindex;
+};
+#define TUNNEL_MSG_FLAG_STATS 0x01
+#define TUNNEL_MSG_VALID_USER_FLAGS TUNNEL_MSG_FLAG_STATS
+enum {
+  VNIFILTER_ENTRY_STATS_UNSPEC,
+  VNIFILTER_ENTRY_STATS_RX_BYTES,
+  VNIFILTER_ENTRY_STATS_RX_PKTS,
+  VNIFILTER_ENTRY_STATS_RX_DROPS,
+  VNIFILTER_ENTRY_STATS_RX_ERRORS,
+  VNIFILTER_ENTRY_STATS_TX_BYTES,
+  VNIFILTER_ENTRY_STATS_TX_PKTS,
+  VNIFILTER_ENTRY_STATS_TX_DROPS,
+  VNIFILTER_ENTRY_STATS_TX_ERRORS,
+  VNIFILTER_ENTRY_STATS_PAD,
+  __VNIFILTER_ENTRY_STATS_MAX
+};
+#define VNIFILTER_ENTRY_STATS_MAX (__VNIFILTER_ENTRY_STATS_MAX - 1)
+enum {
+  VXLAN_VNIFILTER_ENTRY_UNSPEC,
+  VXLAN_VNIFILTER_ENTRY_START,
+  VXLAN_VNIFILTER_ENTRY_END,
+  VXLAN_VNIFILTER_ENTRY_GROUP,
+  VXLAN_VNIFILTER_ENTRY_GROUP6,
+  VXLAN_VNIFILTER_ENTRY_STATS,
+  __VXLAN_VNIFILTER_ENTRY_MAX
+};
+#define VXLAN_VNIFILTER_ENTRY_MAX (__VXLAN_VNIFILTER_ENTRY_MAX - 1)
+enum {
+  VXLAN_VNIFILTER_UNSPEC,
+  VXLAN_VNIFILTER_ENTRY,
+  __VXLAN_VNIFILTER_MAX
+};
+#define VXLAN_VNIFILTER_MAX (__VXLAN_VNIFILTER_MAX - 1)
 enum {
   IFLA_VXLAN_UNSPEC,
   IFLA_VXLAN_ID,
@@ -459,6 +509,7 @@
   IFLA_VXLAN_GPE,
   IFLA_VXLAN_TTL_INHERIT,
   IFLA_VXLAN_DF,
+  IFLA_VXLAN_VNIFILTER,
   __IFLA_VXLAN_MAX
 };
 #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1)
@@ -488,6 +539,7 @@
   IFLA_GENEVE_LABEL,
   IFLA_GENEVE_TTL_INHERIT,
   IFLA_GENEVE_DF,
+  IFLA_GENEVE_INNER_PROTO_INHERIT,
   __IFLA_GENEVE_MAX
 };
 #define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1)
@@ -523,6 +575,8 @@
   IFLA_GTP_FD1,
   IFLA_GTP_PDP_HASHSIZE,
   IFLA_GTP_ROLE,
+  IFLA_GTP_CREATE_SOCKETS,
+  IFLA_GTP_RESTART_COUNT,
   __IFLA_GTP_MAX,
 };
 #define IFLA_GTP_MAX (__IFLA_GTP_MAX - 1)
@@ -558,6 +612,7 @@
   IFLA_BOND_PEER_NOTIF_DELAY,
   IFLA_BOND_AD_LACP_ACTIVE,
   IFLA_BOND_MISSED_MAX,
+  IFLA_BOND_NS_IP6_TARGET,
   __IFLA_BOND_MAX,
 };
 #define IFLA_BOND_MAX (__IFLA_BOND_MAX - 1)
@@ -777,6 +832,13 @@
 #define IFLA_STATS_MAX (__IFLA_STATS_MAX - 1)
 #define IFLA_STATS_FILTER_BIT(ATTR) (1 << (ATTR - 1))
 enum {
+  IFLA_STATS_GETSET_UNSPEC,
+  IFLA_STATS_GET_FILTERS,
+  IFLA_STATS_SET_OFFLOAD_XSTATS_L3_STATS,
+  __IFLA_STATS_GETSET_MAX,
+};
+#define IFLA_STATS_GETSET_MAX (__IFLA_STATS_GETSET_MAX - 1)
+enum {
   LINK_XSTATS_TYPE_UNSPEC,
   LINK_XSTATS_TYPE_BRIDGE,
   LINK_XSTATS_TYPE_BOND,
@@ -786,9 +848,18 @@
 enum {
   IFLA_OFFLOAD_XSTATS_UNSPEC,
   IFLA_OFFLOAD_XSTATS_CPU_HIT,
+  IFLA_OFFLOAD_XSTATS_HW_S_INFO,
+  IFLA_OFFLOAD_XSTATS_L3_STATS,
   __IFLA_OFFLOAD_XSTATS_MAX
 };
 #define IFLA_OFFLOAD_XSTATS_MAX (__IFLA_OFFLOAD_XSTATS_MAX - 1)
+enum {
+  IFLA_OFFLOAD_XSTATS_HW_S_INFO_UNSPEC,
+  IFLA_OFFLOAD_XSTATS_HW_S_INFO_REQUEST,
+  IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED,
+  __IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX,
+};
+#define IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX (__IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX - 1)
 #define XDP_FLAGS_UPDATE_IF_NOEXIST (1U << 0)
 #define XDP_FLAGS_SKB_MODE (1U << 1)
 #define XDP_FLAGS_DRV_MODE (1U << 2)
diff --git a/sysroots/i686-linux-musl/include/linux/if_tunnel.h b/sysroots/i686-linux-musl/include/linux/if_tunnel.h
index 8e1847f..01c2dc9 100644
--- a/sysroots/i686-linux-musl/include/linux/if_tunnel.h
+++ b/sysroots/i686-linux-musl/include/linux/if_tunnel.h
@@ -169,5 +169,6 @@
 #define TUNNEL_VXLAN_OPT __cpu_to_be16(0x1000)
 #define TUNNEL_NOCACHE __cpu_to_be16(0x2000)
 #define TUNNEL_ERSPAN_OPT __cpu_to_be16(0x4000)
-#define TUNNEL_OPTIONS_PRESENT (TUNNEL_GENEVE_OPT | TUNNEL_VXLAN_OPT | TUNNEL_ERSPAN_OPT)
+#define TUNNEL_GTP_OPT __cpu_to_be16(0x8000)
+#define TUNNEL_OPTIONS_PRESENT (TUNNEL_GENEVE_OPT | TUNNEL_VXLAN_OPT | TUNNEL_ERSPAN_OPT | TUNNEL_GTP_OPT)
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/iio/types.h b/sysroots/i686-linux-musl/include/linux/iio/types.h
index 22409a7..aa66d50 100644
--- a/sysroots/i686-linux-musl/include/linux/iio/types.h
+++ b/sysroots/i686-linux-musl/include/linux/iio/types.h
@@ -109,6 +109,7 @@
   IIO_EV_TYPE_THRESH_ADAPTIVE,
   IIO_EV_TYPE_MAG_ADAPTIVE,
   IIO_EV_TYPE_CHANGE,
+  IIO_EV_TYPE_MAG_REFERENCED,
 };
 enum iio_event_direction {
   IIO_EV_DIR_EITHER,
diff --git a/sysroots/i686-linux-musl/include/linux/input-event-codes.h b/sysroots/i686-linux-musl/include/linux/input-event-codes.h
index 34cd23c..4b251df 100644
--- a/sysroots/i686-linux-musl/include/linux/input-event-codes.h
+++ b/sysroots/i686-linux-musl/include/linux/input-event-codes.h
@@ -580,6 +580,21 @@
 #define KEY_ONSCREEN_KEYBOARD 0x278
 #define KEY_PRIVACY_SCREEN_TOGGLE 0x279
 #define KEY_SELECTIVE_SCREENSHOT 0x27a
+#define KEY_NEXT_ELEMENT 0x27b
+#define KEY_PREVIOUS_ELEMENT 0x27c
+#define KEY_AUTOPILOT_ENGAGE_TOGGLE 0x27d
+#define KEY_MARK_WAYPOINT 0x27e
+#define KEY_SOS 0x27f
+#define KEY_NAV_CHART 0x280
+#define KEY_FISHING_CHART 0x281
+#define KEY_SINGLE_RANGE_RADAR 0x282
+#define KEY_DUAL_RANGE_RADAR 0x283
+#define KEY_RADAR_OVERLAY 0x284
+#define KEY_TRADITIONAL_SONAR 0x285
+#define KEY_CLEARVU_SONAR 0x286
+#define KEY_SIDEVU_SONAR 0x287
+#define KEY_NAV_INFO 0x288
+#define KEY_BRIGHTNESS_MENU 0x289
 #define KEY_MACRO1 0x290
 #define KEY_MACRO2 0x291
 #define KEY_MACRO3 0x292
diff --git a/sysroots/i686-linux-musl/include/linux/io_uring.h b/sysroots/i686-linux-musl/include/linux/io_uring.h
index 96944f8..2f599aa 100644
--- a/sysroots/i686-linux-musl/include/linux/io_uring.h
+++ b/sysroots/i686-linux-musl/include/linux/io_uring.h
@@ -87,6 +87,7 @@
 #define IORING_SETUP_CLAMP (1U << 4)
 #define IORING_SETUP_ATTACH_WQ (1U << 5)
 #define IORING_SETUP_R_DISABLED (1U << 6)
+#define IORING_SETUP_SUBMIT_ALL (1U << 7)
 enum {
   IORING_OP_NOP,
   IORING_OP_READV,
@@ -128,6 +129,7 @@
   IORING_OP_MKDIRAT,
   IORING_OP_SYMLINKAT,
   IORING_OP_LINKAT,
+  IORING_OP_MSG_RING,
   IORING_OP_LAST,
 };
 #define IORING_FSYNC_DATASYNC (1U << 0)
@@ -185,6 +187,7 @@
 #define IORING_ENTER_SQ_WAKEUP (1U << 1)
 #define IORING_ENTER_SQ_WAIT (1U << 2)
 #define IORING_ENTER_EXT_ARG (1U << 3)
+#define IORING_ENTER_REGISTERED_RING (1U << 4)
 struct io_uring_params {
   __u32 sq_entries;
   __u32 cq_entries;
@@ -209,6 +212,7 @@
 #define IORING_FEAT_NATIVE_WORKERS (1U << 9)
 #define IORING_FEAT_RSRC_TAGS (1U << 10)
 #define IORING_FEAT_CQE_SKIP (1U << 11)
+#define IORING_FEAT_LINKED_FILE (1U << 12)
 enum {
   IORING_REGISTER_BUFFERS = 0,
   IORING_UNREGISTER_BUFFERS = 1,
@@ -230,6 +234,8 @@
   IORING_REGISTER_IOWQ_AFF = 17,
   IORING_UNREGISTER_IOWQ_AFF = 18,
   IORING_REGISTER_IOWQ_MAX_WORKERS = 19,
+  IORING_REGISTER_RING_FDS = 20,
+  IORING_UNREGISTER_RING_FDS = 21,
   IORING_REGISTER_LAST
 };
 enum {
diff --git a/sysroots/i686-linux-musl/include/linux/ioam6_iptunnel.h b/sysroots/i686-linux-musl/include/linux/ioam6_iptunnel.h
index 7426225..ec1a6a8 100644
--- a/sysroots/i686-linux-musl/include/linux/ioam6_iptunnel.h
+++ b/sysroots/i686-linux-musl/include/linux/ioam6_iptunnel.h
@@ -32,6 +32,10 @@
   IOAM6_IPTUNNEL_MODE,
   IOAM6_IPTUNNEL_DST,
   IOAM6_IPTUNNEL_TRACE,
+#define IOAM6_IPTUNNEL_FREQ_MIN 1
+#define IOAM6_IPTUNNEL_FREQ_MAX 1000000
+  IOAM6_IPTUNNEL_FREQ_K,
+  IOAM6_IPTUNNEL_FREQ_N,
   __IOAM6_IPTUNNEL_MAX,
 };
 #define IOAM6_IPTUNNEL_MAX (__IOAM6_IPTUNNEL_MAX - 1)
diff --git a/sysroots/i686-linux-musl/include/linux/iommu.h b/sysroots/i686-linux-musl/include/linux/iommu.h
index 0a0af92..0304a32 100644
--- a/sysroots/i686-linux-musl/include/linux/iommu.h
+++ b/sysroots/i686-linux-musl/include/linux/iommu.h
@@ -85,76 +85,4 @@
   __u32 grpid;
   __u32 code;
 };
-enum iommu_inv_granularity {
-  IOMMU_INV_GRANU_DOMAIN,
-  IOMMU_INV_GRANU_PASID,
-  IOMMU_INV_GRANU_ADDR,
-  IOMMU_INV_GRANU_NR,
-};
-struct iommu_inv_addr_info {
-#define IOMMU_INV_ADDR_FLAGS_PASID (1 << 0)
-#define IOMMU_INV_ADDR_FLAGS_ARCHID (1 << 1)
-#define IOMMU_INV_ADDR_FLAGS_LEAF (1 << 2)
-  __u32 flags;
-  __u32 archid;
-  __u64 pasid;
-  __u64 addr;
-  __u64 granule_size;
-  __u64 nb_granules;
-};
-struct iommu_inv_pasid_info {
-#define IOMMU_INV_PASID_FLAGS_PASID (1 << 0)
-#define IOMMU_INV_PASID_FLAGS_ARCHID (1 << 1)
-  __u32 flags;
-  __u32 archid;
-  __u64 pasid;
-};
-struct iommu_cache_invalidate_info {
-  __u32 argsz;
-#define IOMMU_CACHE_INVALIDATE_INFO_VERSION_1 1
-  __u32 version;
-#define IOMMU_CACHE_INV_TYPE_IOTLB (1 << 0)
-#define IOMMU_CACHE_INV_TYPE_DEV_IOTLB (1 << 1)
-#define IOMMU_CACHE_INV_TYPE_PASID (1 << 2)
-#define IOMMU_CACHE_INV_TYPE_NR (3)
-  __u8 cache;
-  __u8 granularity;
-  __u8 padding[6];
-  union {
-    struct iommu_inv_pasid_info pasid_info;
-    struct iommu_inv_addr_info addr_info;
-  } granu;
-};
-struct iommu_gpasid_bind_data_vtd {
-#define IOMMU_SVA_VTD_GPASID_SRE (1 << 0)
-#define IOMMU_SVA_VTD_GPASID_EAFE (1 << 1)
-#define IOMMU_SVA_VTD_GPASID_PCD (1 << 2)
-#define IOMMU_SVA_VTD_GPASID_PWT (1 << 3)
-#define IOMMU_SVA_VTD_GPASID_EMTE (1 << 4)
-#define IOMMU_SVA_VTD_GPASID_CD (1 << 5)
-#define IOMMU_SVA_VTD_GPASID_WPE (1 << 6)
-#define IOMMU_SVA_VTD_GPASID_LAST (1 << 7)
-  __u64 flags;
-  __u32 pat;
-  __u32 emt;
-};
-#define IOMMU_SVA_VTD_GPASID_MTS_MASK (IOMMU_SVA_VTD_GPASID_CD | IOMMU_SVA_VTD_GPASID_EMTE | IOMMU_SVA_VTD_GPASID_PCD | IOMMU_SVA_VTD_GPASID_PWT)
-struct iommu_gpasid_bind_data {
-  __u32 argsz;
-#define IOMMU_GPASID_BIND_VERSION_1 1
-  __u32 version;
-#define IOMMU_PASID_FORMAT_INTEL_VTD 1
-#define IOMMU_PASID_FORMAT_LAST 2
-  __u32 format;
-  __u32 addr_width;
-#define IOMMU_SVA_GPASID_VAL (1 << 0)
-  __u64 flags;
-  __u64 gpgd;
-  __u64 hpasid;
-  __u64 gpasid;
-  __u8 padding[8];
-  union {
-    struct iommu_gpasid_bind_data_vtd vtd;
-  } vendor;
-};
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/kexec.h b/sysroots/i686-linux-musl/include/linux/kexec.h
index 2e3bd0c..7dbc87e 100644
--- a/sysroots/i686-linux-musl/include/linux/kexec.h
+++ b/sysroots/i686-linux-musl/include/linux/kexec.h
@@ -43,8 +43,8 @@
 #define KEXEC_SEGMENT_MAX 16
 struct kexec_segment {
   const void * buf;
-  size_t bufsz;
+  __kernel_size_t bufsz;
   const void * mem;
-  size_t memsz;
+  __kernel_size_t memsz;
 };
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/kfd_ioctl.h b/sysroots/i686-linux-musl/include/linux/kfd_ioctl.h
index c52ac64..8ec47f4 100644
--- a/sysroots/i686-linux-musl/include/linux/kfd_ioctl.h
+++ b/sysroots/i686-linux-musl/include/linux/kfd_ioctl.h
@@ -21,7 +21,7 @@
 #include <drm/drm.h>
 #include <linux/ioctl.h>
 #define KFD_IOCTL_MAJOR_VERSION 1
-#define KFD_IOCTL_MINOR_VERSION 6
+#define KFD_IOCTL_MINOR_VERSION 8
 struct kfd_ioctl_get_version_args {
   __u32 major_version;
   __u32 minor_version;
@@ -132,6 +132,7 @@
   __u32 gpu_id;
   __u32 buf_size_in_bytes;
 };
+#define KFD_INVALID_FD 0xffffffff
 #define KFD_IOC_EVENT_SIGNAL 0
 #define KFD_IOC_EVENT_NODECHANGE 1
 #define KFD_IOC_EVENT_DEVICESTATECHANGE 2
@@ -296,10 +297,45 @@
   KFD_SMI_EVENT_GPU_POST_RESET = 4,
 };
 #define KFD_SMI_EVENT_MASK_FROM_INDEX(i) (1ULL << ((i) - 1))
+#define KFD_SMI_EVENT_MSG_SIZE 96
 struct kfd_ioctl_smi_events_args {
   __u32 gpuid;
   __u32 anon_fd;
 };
+enum kfd_criu_op {
+  KFD_CRIU_OP_PROCESS_INFO,
+  KFD_CRIU_OP_CHECKPOINT,
+  KFD_CRIU_OP_UNPAUSE,
+  KFD_CRIU_OP_RESTORE,
+  KFD_CRIU_OP_RESUME,
+};
+struct kfd_ioctl_criu_args {
+  __u64 devices;
+  __u64 bos;
+  __u64 priv_data;
+  __u64 priv_data_size;
+  __u32 num_devices;
+  __u32 num_bos;
+  __u32 num_objects;
+  __u32 pid;
+  __u32 op;
+};
+struct kfd_criu_device_bucket {
+  __u32 user_gpu_id;
+  __u32 actual_gpu_id;
+  __u32 drm_fd;
+  __u32 pad;
+};
+struct kfd_criu_bo_bucket {
+  __u64 addr;
+  __u64 size;
+  __u64 offset;
+  __u64 restored_offset;
+  __u32 gpu_id;
+  __u32 alloc_flags;
+  __u32 dmabuf_fd;
+  __u32 pad;
+};
 enum kfd_mmio_remap {
   KFD_MMIO_REMAP_HDP_MEM_FLUSH_CNTL = 0,
   KFD_MMIO_REMAP_HDP_REG_FLUSH_CNTL = 4,
@@ -337,7 +373,7 @@
   __u64 size;
   __u32 op;
   __u32 nattr;
-  struct kfd_ioctl_svm_attribute attrs[0];
+  struct kfd_ioctl_svm_attribute attrs[];
 };
 struct kfd_ioctl_set_xnack_mode_args {
   __s32 xnack_enabled;
@@ -359,10 +395,10 @@
 #define AMDKFD_IOC_SET_EVENT AMDKFD_IOW(0x0A, struct kfd_ioctl_set_event_args)
 #define AMDKFD_IOC_RESET_EVENT AMDKFD_IOW(0x0B, struct kfd_ioctl_reset_event_args)
 #define AMDKFD_IOC_WAIT_EVENTS AMDKFD_IOWR(0x0C, struct kfd_ioctl_wait_events_args)
-#define AMDKFD_IOC_DBG_REGISTER AMDKFD_IOW(0x0D, struct kfd_ioctl_dbg_register_args)
-#define AMDKFD_IOC_DBG_UNREGISTER AMDKFD_IOW(0x0E, struct kfd_ioctl_dbg_unregister_args)
-#define AMDKFD_IOC_DBG_ADDRESS_WATCH AMDKFD_IOW(0x0F, struct kfd_ioctl_dbg_address_watch_args)
-#define AMDKFD_IOC_DBG_WAVE_CONTROL AMDKFD_IOW(0x10, struct kfd_ioctl_dbg_wave_control_args)
+#define AMDKFD_IOC_DBG_REGISTER_DEPRECATED AMDKFD_IOW(0x0D, struct kfd_ioctl_dbg_register_args)
+#define AMDKFD_IOC_DBG_UNREGISTER_DEPRECATED AMDKFD_IOW(0x0E, struct kfd_ioctl_dbg_unregister_args)
+#define AMDKFD_IOC_DBG_ADDRESS_WATCH_DEPRECATED AMDKFD_IOW(0x0F, struct kfd_ioctl_dbg_address_watch_args)
+#define AMDKFD_IOC_DBG_WAVE_CONTROL_DEPRECATED AMDKFD_IOW(0x10, struct kfd_ioctl_dbg_wave_control_args)
 #define AMDKFD_IOC_SET_SCRATCH_BACKING_VA AMDKFD_IOWR(0x11, struct kfd_ioctl_set_scratch_backing_va_args)
 #define AMDKFD_IOC_GET_TILE_CONFIG AMDKFD_IOWR(0x12, struct kfd_ioctl_get_tile_config_args)
 #define AMDKFD_IOC_SET_TRAP_HANDLER AMDKFD_IOW(0x13, struct kfd_ioctl_set_trap_handler_args)
@@ -380,6 +416,7 @@
 #define AMDKFD_IOC_SMI_EVENTS AMDKFD_IOWR(0x1F, struct kfd_ioctl_smi_events_args)
 #define AMDKFD_IOC_SVM AMDKFD_IOWR(0x20, struct kfd_ioctl_svm_args)
 #define AMDKFD_IOC_SET_XNACK_MODE AMDKFD_IOWR(0x21, struct kfd_ioctl_set_xnack_mode_args)
+#define AMDKFD_IOC_CRIU_OP AMDKFD_IOWR(0x22, struct kfd_ioctl_criu_args)
 #define AMDKFD_COMMAND_START 0x01
-#define AMDKFD_COMMAND_END 0x22
+#define AMDKFD_COMMAND_END 0x23
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/kvm.h b/sysroots/i686-linux-musl/include/linux/kvm.h
index 1cf7182..5cc9905 100644
--- a/sysroots/i686-linux-musl/include/linux/kvm.h
+++ b/sysroots/i686-linux-musl/include/linux/kvm.h
@@ -337,7 +337,11 @@
 #define KVM_SYSTEM_EVENT_RESET 2
 #define KVM_SYSTEM_EVENT_CRASH 3
       __u32 type;
-      __u64 flags;
+      __u32 ndata;
+      union {
+        __u64 flags;
+        __u64 data[16];
+      };
     } system_event;
     struct {
       __u64 addr;
@@ -419,7 +423,10 @@
   __u32 op;
   __u64 buf;
   union {
-    __u8 ar;
+    struct {
+      __u8 ar;
+      __u8 key;
+    };
     __u32 sida_offset;
     __u8 reserved[32];
   };
@@ -428,8 +435,11 @@
 #define KVM_S390_MEMOP_LOGICAL_WRITE 1
 #define KVM_S390_MEMOP_SIDA_READ 2
 #define KVM_S390_MEMOP_SIDA_WRITE 3
+#define KVM_S390_MEMOP_ABSOLUTE_READ 4
+#define KVM_S390_MEMOP_ABSOLUTE_WRITE 5
 #define KVM_S390_MEMOP_F_CHECK_ONLY (1ULL << 0)
 #define KVM_S390_MEMOP_F_INJECT_EXCEPTION (1ULL << 1)
+#define KVM_S390_MEMOP_F_SKEY_PROTECTION (1ULL << 2)
 struct kvm_interrupt {
   __u32 irq;
 };
@@ -890,6 +900,10 @@
 #define KVM_CAP_XSAVE2 208
 #define KVM_CAP_SYS_ATTRIBUTES 209
 #define KVM_CAP_PPC_AIL_MODE_3 210
+#define KVM_CAP_S390_MEM_OP_EXTENSION 211
+#define KVM_CAP_PMU_CAPABILITY 212
+#define KVM_CAP_DISABLE_QUIRKS2 213
+#define KVM_CAP_SYSTEM_EVENT_DATA 215
 #ifdef KVM_CAP_IRQ_ROUTING
 struct kvm_irq_routing_irqchip {
   __u32 irqchip;
@@ -1480,6 +1494,7 @@
 };
 #define KVM_BUS_LOCK_DETECTION_OFF (1 << 0)
 #define KVM_BUS_LOCK_DETECTION_EXIT (1 << 1)
+#define KVM_PMU_CAP_DISABLE (1 << 0)
 struct kvm_stats_header {
   __u32 flags;
   __u32 name_size;
diff --git a/sysroots/i686-linux-musl/include/linux/lirc.h b/sysroots/i686-linux-musl/include/linux/lirc.h
index a0ac24a..ea45506 100644
--- a/sysroots/i686-linux-musl/include/linux/lirc.h
+++ b/sysroots/i686-linux-musl/include/linux/lirc.h
@@ -26,18 +26,21 @@
 #define LIRC_MODE2_PULSE 0x01000000
 #define LIRC_MODE2_FREQUENCY 0x02000000
 #define LIRC_MODE2_TIMEOUT 0x03000000
+#define LIRC_MODE2_OVERFLOW 0x04000000
 #define LIRC_VALUE_MASK 0x00FFFFFF
 #define LIRC_MODE2_MASK 0xFF000000
 #define LIRC_SPACE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
 #define LIRC_PULSE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
 #define LIRC_FREQUENCY(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
 #define LIRC_TIMEOUT(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
+#define LIRC_OVERFLOW(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_OVERFLOW)
 #define LIRC_VALUE(val) ((val) & LIRC_VALUE_MASK)
 #define LIRC_MODE2(val) ((val) & LIRC_MODE2_MASK)
 #define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
 #define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
 #define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
 #define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
+#define LIRC_IS_OVERFLOW(val) (LIRC_MODE2(val) == LIRC_MODE2_OVERFLOW)
 #define lirc_t int
 #define LIRC_MODE2SEND(x) (x)
 #define LIRC_SEND2MODE(x) (x)
@@ -63,17 +66,13 @@
 #define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
 #define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
 #define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16)
-#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16)
-#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000
 #define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000
 #define LIRC_CAN_GET_REC_RESOLUTION 0x20000000
 #define LIRC_CAN_SET_REC_TIMEOUT 0x10000000
-#define LIRC_CAN_SET_REC_FILTER 0x08000000
 #define LIRC_CAN_MEASURE_CARRIER 0x02000000
 #define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000
 #define LIRC_CAN_SEND(x) ((x) & LIRC_CAN_SEND_MASK)
 #define LIRC_CAN_REC(x) ((x) & LIRC_CAN_REC_MASK)
-#define LIRC_CAN_NOTIFY_DECODE 0x01000000
 #define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32)
 #define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32)
 #define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32)
diff --git a/sysroots/i686-linux-musl/include/linux/mctp.h b/sysroots/i686-linux-musl/include/linux/mctp.h
index 21a9a14..f02c12f 100644
--- a/sysroots/i686-linux-musl/include/linux/mctp.h
+++ b/sysroots/i686-linux-musl/include/linux/mctp.h
@@ -46,5 +46,13 @@
 #define MCTP_ADDR_ANY 0xff
 #define MCTP_TAG_MASK 0x07
 #define MCTP_TAG_OWNER 0x08
+#define MCTP_TAG_PREALLOC 0x10
 #define MCTP_OPT_ADDR_EXT 1
+#define SIOCMCTPALLOCTAG (SIOCPROTOPRIVATE + 0)
+#define SIOCMCTPDROPTAG (SIOCPROTOPRIVATE + 1)
+struct mctp_ioc_tag_ctl {
+  mctp_eid_t peer_addr;
+  __u8 tag;
+  __u16 flags;
+};
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/mptcp.h b/sysroots/i686-linux-musl/include/linux/mptcp.h
index 67b0ce3..7b3acd5 100644
--- a/sysroots/i686-linux-musl/include/linux/mptcp.h
+++ b/sysroots/i686-linux-musl/include/linux/mptcp.h
@@ -77,6 +77,7 @@
 #define MPTCP_PM_ADDR_FLAG_SUBFLOW (1 << 1)
 #define MPTCP_PM_ADDR_FLAG_BACKUP (1 << 2)
 #define MPTCP_PM_ADDR_FLAG_FULLMESH (1 << 3)
+#define MPTCP_PM_ADDR_FLAG_IMPLICIT (1 << 4)
 enum {
   MPTCP_PM_CMD_UNSPEC,
   MPTCP_PM_CMD_ADD_ADDR,
diff --git a/sysroots/i686-linux-musl/include/linux/mroute6.h b/sysroots/i686-linux-musl/include/linux/mroute6.h
index c73765c..68480de 100644
--- a/sysroots/i686-linux-musl/include/linux/mroute6.h
+++ b/sysroots/i686-linux-musl/include/linux/mroute6.h
@@ -93,6 +93,7 @@
 #define MRT6MSG_NOCACHE 1
 #define MRT6MSG_WRONGMIF 2
 #define MRT6MSG_WHOLEPKT 3
+#define MRT6MSG_WRMIFWHOLE 4
   __u8 im6_mbz;
   __u8 im6_msgtype;
   __u16 im6_mif;
diff --git a/sysroots/i686-linux-musl/include/linux/ndctl.h b/sysroots/i686-linux-musl/include/linux/ndctl.h
index 53f8ba4..0fd3ac4 100644
--- a/sysroots/i686-linux-musl/include/linux/ndctl.h
+++ b/sysroots/i686-linux-musl/include/linux/ndctl.h
@@ -129,7 +129,6 @@
 #define ND_DEVICE_REGION_BLK 3
 #define ND_DEVICE_NAMESPACE_IO 4
 #define ND_DEVICE_NAMESPACE_PMEM 5
-#define ND_DEVICE_NAMESPACE_BLK 6
 #define ND_DEVICE_DAX_PMEM 7
 enum nd_driver_flags {
   ND_DRIVER_DIMM = 1 << ND_DEVICE_DIMM,
@@ -137,7 +136,6 @@
   ND_DRIVER_REGION_BLK = 1 << ND_DEVICE_REGION_BLK,
   ND_DRIVER_NAMESPACE_IO = 1 << ND_DEVICE_NAMESPACE_IO,
   ND_DRIVER_NAMESPACE_PMEM = 1 << ND_DEVICE_NAMESPACE_PMEM,
-  ND_DRIVER_NAMESPACE_BLK = 1 << ND_DEVICE_NAMESPACE_BLK,
   ND_DRIVER_DAX_PMEM = 1 << ND_DEVICE_DAX_PMEM,
 };
 enum ars_masks {
diff --git a/sysroots/i686-linux-musl/include/linux/net_dropmon.h b/sysroots/i686-linux-musl/include/linux/net_dropmon.h
index 01b76cb..35f70a5 100644
--- a/sysroots/i686-linux-musl/include/linux/net_dropmon.h
+++ b/sysroots/i686-linux-musl/include/linux/net_dropmon.h
@@ -87,6 +87,7 @@
   NET_DM_ATTR_SW_DROPS,
   NET_DM_ATTR_HW_DROPS,
   NET_DM_ATTR_FLOW_ACTION_COOKIE,
+  NET_DM_ATTR_REASON,
   __NET_DM_ATTR_MAX,
   NET_DM_ATTR_MAX = __NET_DM_ATTR_MAX - 1
 };
diff --git a/sysroots/i686-linux-musl/include/linux/netfilter/nfnetlink_queue.h b/sysroots/i686-linux-musl/include/linux/netfilter/nfnetlink_queue.h
index 75fa359..d100dec 100644
--- a/sysroots/i686-linux-musl/include/linux/netfilter/nfnetlink_queue.h
+++ b/sysroots/i686-linux-musl/include/linux/netfilter/nfnetlink_queue.h
@@ -70,6 +70,7 @@
   NFQA_SECCTX,
   NFQA_VLAN,
   NFQA_L2HDR,
+  NFQA_PRIORITY,
   __NFQA_MAX
 };
 #define NFQA_MAX (__NFQA_MAX - 1)
diff --git a/sysroots/i686-linux-musl/include/linux/nfs4.h b/sysroots/i686-linux-musl/include/linux/nfs4.h
index 9d614ce..ef860e2 100644
--- a/sysroots/i686-linux-musl/include/linux/nfs4.h
+++ b/sysroots/i686-linux-musl/include/linux/nfs4.h
@@ -45,6 +45,7 @@
 #define NFS4_FH_VOL_RENAME 0x0008
 #define NFS4_OPEN_RESULT_CONFIRM 0x0002
 #define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
+#define NFS4_OPEN_RESULT_PRESERVE_UNLINKED 0x0008
 #define NFS4_OPEN_RESULT_MAY_NOTIFY_LOCK 0x0020
 #define NFS4_SHARE_ACCESS_MASK 0x000F
 #define NFS4_SHARE_ACCESS_READ 0x0001
diff --git a/sysroots/i686-linux-musl/include/linux/nl80211.h b/sysroots/i686-linux-musl/include/linux/nl80211.h
index e902178..61de391 100644
--- a/sysroots/i686-linux-musl/include/linux/nl80211.h
+++ b/sysroots/i686-linux-musl/include/linux/nl80211.h
@@ -511,6 +511,7 @@
   NL80211_ATTR_MBSSID_ELEMS,
   NL80211_ATTR_RADAR_BACKGROUND,
   NL80211_ATTR_AP_SETTINGS_FLAGS,
+  NL80211_ATTR_EHT_CAPABILITY,
   __NL80211_ATTR_AFTER_LAST,
   NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST,
   NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
@@ -555,6 +556,8 @@
 #define NL80211_HE_MAX_CAPABILITY_LEN 54
 #define NL80211_MAX_NR_CIPHER_SUITES 5
 #define NL80211_MAX_NR_AKM_SUITES 2
+#define NL80211_EHT_MIN_CAPABILITY_LEN 13
+#define NL80211_EHT_MAX_CAPABILITY_LEN 51
 #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10
 #define NL80211_SCAN_RSSI_THOLD_OFF - 300
 #define NL80211_CQM_TXE_MAX_INTVL 1800
@@ -616,6 +619,29 @@
   NL80211_RATE_INFO_HE_RU_ALLOC_996,
   NL80211_RATE_INFO_HE_RU_ALLOC_2x996,
 };
+enum nl80211_eht_gi {
+  NL80211_RATE_INFO_EHT_GI_0_8,
+  NL80211_RATE_INFO_EHT_GI_1_6,
+  NL80211_RATE_INFO_EHT_GI_3_2,
+};
+enum nl80211_eht_ru_alloc {
+  NL80211_RATE_INFO_EHT_RU_ALLOC_26,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_52,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_52P26,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_106,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_106P26,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_242,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_484,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_484P242,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_996,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_996P484,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_2x996,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_3x996,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_4x996,
+};
 enum nl80211_rate_info {
   __NL80211_RATE_INFO_INVALID,
   NL80211_RATE_INFO_BITRATE,
@@ -635,6 +661,11 @@
   NL80211_RATE_INFO_HE_GI,
   NL80211_RATE_INFO_HE_DCM,
   NL80211_RATE_INFO_HE_RU_ALLOC,
+  NL80211_RATE_INFO_320_MHZ_WIDTH,
+  NL80211_RATE_INFO_EHT_MCS,
+  NL80211_RATE_INFO_EHT_NSS,
+  NL80211_RATE_INFO_EHT_GI,
+  NL80211_RATE_INFO_EHT_RU_ALLOC,
   __NL80211_RATE_INFO_AFTER_LAST,
   NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
 };
@@ -754,6 +785,10 @@
   NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
   NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
   NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS,
+  NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC,
+  NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY,
+  NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET,
+  NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE,
   __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
   NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1
 };
@@ -810,6 +845,8 @@
   NL80211_FREQUENCY_ATTR_4MHZ,
   NL80211_FREQUENCY_ATTR_8MHZ,
   NL80211_FREQUENCY_ATTR_16MHZ,
+  NL80211_FREQUENCY_ATTR_NO_320MHZ,
+  NL80211_FREQUENCY_ATTR_NO_EHT,
   __NL80211_FREQUENCY_ATTR_AFTER_LAST,
   NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
 };
@@ -878,6 +915,7 @@
   NL80211_RRF_NO_80MHZ = 1 << 15,
   NL80211_RRF_NO_160MHZ = 1 << 16,
   NL80211_RRF_NO_HE = 1 << 17,
+  NL80211_RRF_NO_320MHZ = 1 << 18,
 };
 #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
 #define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR
@@ -1033,6 +1071,7 @@
   NL80211_CHAN_WIDTH_4,
   NL80211_CHAN_WIDTH_8,
   NL80211_CHAN_WIDTH_16,
+  NL80211_CHAN_WIDTH_320,
 };
 enum nl80211_bss_scan_width {
   NL80211_BSS_CHAN_WIDTH_20,
diff --git a/sysroots/i686-linux-musl/include/linux/nvme_ioctl.h b/sysroots/i686-linux-musl/include/linux/nvme_ioctl.h
index f2a328e..a2f9914 100644
--- a/sysroots/i686-linux-musl/include/linux/nvme_ioctl.h
+++ b/sysroots/i686-linux-musl/include/linux/nvme_ioctl.h
@@ -63,7 +63,10 @@
   __u64 metadata;
   __u64 addr;
   __u32 metadata_len;
-  __u32 data_len;
+  union {
+    __u32 data_len;
+    __u32 vec_cnt;
+  };
   __u32 cdw10;
   __u32 cdw11;
   __u32 cdw12;
@@ -84,4 +87,5 @@
 #define NVME_IOCTL_RESCAN _IO('N', 0x46)
 #define NVME_IOCTL_ADMIN64_CMD _IOWR('N', 0x47, struct nvme_passthru_cmd64)
 #define NVME_IOCTL_IO64_CMD _IOWR('N', 0x48, struct nvme_passthru_cmd64)
+#define NVME_IOCTL_IO64_CMD_VEC _IOWR('N', 0x49, struct nvme_passthru_cmd64)
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/omap3isp.h b/sysroots/i686-linux-musl/include/linux/omap3isp.h
index d2eceb7..53345e3 100644
--- a/sysroots/i686-linux-musl/include/linux/omap3isp.h
+++ b/sysroots/i686-linux-musl/include/linux/omap3isp.h
@@ -89,10 +89,11 @@
 struct omap3isp_stat_data {
   struct timeval ts;
   void __user * buf;
-  __u32 buf_size;
+  __struct_group(, frame,, __u32 buf_size;
   __u16 frame_number;
   __u16 cur_frame;
   __u16 config_counter;
+ );
 };
 #define OMAP3ISP_HIST_BINS_32 0
 #define OMAP3ISP_HIST_BINS_64 1
diff --git a/sysroots/i686-linux-musl/include/linux/openvswitch.h b/sysroots/i686-linux-musl/include/linux/openvswitch.h
index 1f8ae17..c7d719c 100644
--- a/sysroots/i686-linux-musl/include/linux/openvswitch.h
+++ b/sysroots/i686-linux-musl/include/linux/openvswitch.h
@@ -190,6 +190,10 @@
   OVS_KEY_ATTR_CT_ORIG_TUPLE_IPV4,
   OVS_KEY_ATTR_CT_ORIG_TUPLE_IPV6,
   OVS_KEY_ATTR_NSH,
+  OVS_KEY_ATTR_PACKET_TYPE,
+  OVS_KEY_ATTR_ND_EXTENSIONS,
+  OVS_KEY_ATTR_TUNNEL_INFO,
+  OVS_KEY_ATTR_IPV6_EXTHDRS,
   __OVS_KEY_ATTR_MAX
 };
 #define OVS_KEY_ATTR_MAX (__OVS_KEY_ATTR_MAX - 1)
@@ -245,6 +249,9 @@
   __u8 ipv6_hlimit;
   __u8 ipv6_frag;
 };
+struct ovs_key_ipv6_exthdrs {
+  __u16 hdrs;
+};
 struct ovs_key_tcp {
   __be16 tcp_src;
   __be16 tcp_dst;
diff --git a/sysroots/i686-linux-musl/include/linux/perf_event.h b/sysroots/i686-linux-musl/include/linux/perf_event.h
index b022586..bcc4e97 100644
--- a/sysroots/i686-linux-musl/include/linux/perf_event.h
+++ b/sysroots/i686-linux-musl/include/linux/perf_event.h
@@ -165,6 +165,8 @@
   PERF_BR_SYSRET = 8,
   PERF_BR_COND_CALL = 9,
   PERF_BR_COND_RET = 10,
+  PERF_BR_ERET = 11,
+  PERF_BR_IRQ = 12,
   PERF_BR_MAX,
 };
 #define PERF_SAMPLE_BRANCH_PLM_ALL (PERF_SAMPLE_BRANCH_USER | PERF_SAMPLE_BRANCH_KERNEL | PERF_SAMPLE_BRANCH_HV)
diff --git a/sysroots/i686-linux-musl/include/linux/pkt_cls.h b/sysroots/i686-linux-musl/include/linux/pkt_cls.h
index 9fd89e0..58d8205 100644
--- a/sysroots/i686-linux-musl/include/linux/pkt_cls.h
+++ b/sysroots/i686-linux-musl/include/linux/pkt_cls.h
@@ -476,6 +476,7 @@
   TCA_FLOWER_KEY_ENC_OPTS_GENEVE,
   TCA_FLOWER_KEY_ENC_OPTS_VXLAN,
   TCA_FLOWER_KEY_ENC_OPTS_ERSPAN,
+  TCA_FLOWER_KEY_ENC_OPTS_GTP,
   __TCA_FLOWER_KEY_ENC_OPTS_MAX,
 };
 #define TCA_FLOWER_KEY_ENC_OPTS_MAX (__TCA_FLOWER_KEY_ENC_OPTS_MAX - 1)
@@ -503,6 +504,13 @@
 };
 #define TCA_FLOWER_KEY_ENC_OPT_ERSPAN_MAX (__TCA_FLOWER_KEY_ENC_OPT_ERSPAN_MAX - 1)
 enum {
+  TCA_FLOWER_KEY_ENC_OPT_GTP_UNSPEC,
+  TCA_FLOWER_KEY_ENC_OPT_GTP_PDU_TYPE,
+  TCA_FLOWER_KEY_ENC_OPT_GTP_QFI,
+  __TCA_FLOWER_KEY_ENC_OPT_GTP_MAX,
+};
+#define TCA_FLOWER_KEY_ENC_OPT_GTP_MAX (__TCA_FLOWER_KEY_ENC_OPT_GTP_MAX - 1)
+enum {
   TCA_FLOWER_KEY_MPLS_OPTS_UNSPEC,
   TCA_FLOWER_KEY_MPLS_OPTS_LSE,
   __TCA_FLOWER_KEY_MPLS_OPTS_MAX,
diff --git a/sysroots/i686-linux-musl/include/linux/psci.h b/sysroots/i686-linux-musl/include/linux/psci.h
index bc522e7..31e7465 100644
--- a/sysroots/i686-linux-musl/include/linux/psci.h
+++ b/sysroots/i686-linux-musl/include/linux/psci.h
@@ -60,6 +60,8 @@
 #define PSCI_0_2_TOS_UP_MIGRATE 0
 #define PSCI_0_2_TOS_UP_NO_MIGRATE 1
 #define PSCI_0_2_TOS_MP 2
+#define PSCI_1_1_RESET_TYPE_SYSTEM_WARM_RESET 0
+#define PSCI_1_1_RESET_TYPE_VENDOR_START 0x80000000U
 #define PSCI_VERSION_MAJOR_SHIFT 16
 #define PSCI_VERSION_MINOR_MASK ((1U << PSCI_VERSION_MAJOR_SHIFT) - 1)
 #define PSCI_VERSION_MAJOR_MASK ~PSCI_VERSION_MINOR_MASK
diff --git a/sysroots/i686-linux-musl/include/linux/reiserfs_xattr.h b/sysroots/i686-linux-musl/include/linux/reiserfs_xattr.h
index 36d31f6..16a7a08 100644
--- a/sysroots/i686-linux-musl/include/linux/reiserfs_xattr.h
+++ b/sysroots/i686-linux-musl/include/linux/reiserfs_xattr.h
@@ -27,6 +27,6 @@
 struct reiserfs_security_handle {
   const char * name;
   void * value;
-  size_t length;
+  __kernel_size_t length;
 };
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/rfkill.h b/sysroots/i686-linux-musl/include/linux/rfkill.h
index 6020baf..b90e67c 100644
--- a/sysroots/i686-linux-musl/include/linux/rfkill.h
+++ b/sysroots/i686-linux-musl/include/linux/rfkill.h
@@ -63,4 +63,6 @@
 #define RFKILL_IOC_MAGIC 'R'
 #define RFKILL_IOC_NOINPUT 1
 #define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+#define RFKILL_IOC_MAX_SIZE 2
+#define RFKILL_IOCTL_MAX_SIZE _IOW(RFKILL_IOC_MAGIC, RFKILL_IOC_MAX_SIZE, __u32)
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/rpmsg.h b/sysroots/i686-linux-musl/include/linux/rpmsg.h
index c5b5a76..9ceccdd 100644
--- a/sysroots/i686-linux-musl/include/linux/rpmsg.h
+++ b/sysroots/i686-linux-musl/include/linux/rpmsg.h
@@ -28,4 +28,6 @@
 };
 #define RPMSG_CREATE_EPT_IOCTL _IOW(0xb5, 0x1, struct rpmsg_endpoint_info)
 #define RPMSG_DESTROY_EPT_IOCTL _IO(0xb5, 0x2)
+#define RPMSG_CREATE_DEV_IOCTL _IOW(0xb5, 0x3, struct rpmsg_endpoint_info)
+#define RPMSG_RELEASE_DEV_IOCTL _IOW(0xb5, 0x4, struct rpmsg_endpoint_info)
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/rseq.h b/sysroots/i686-linux-musl/include/linux/rseq.h
index ba0ceb1..29a9457 100644
--- a/sysroots/i686-linux-musl/include/linux/rseq.h
+++ b/sysroots/i686-linux-musl/include/linux/rseq.h
@@ -47,22 +47,7 @@
 struct rseq {
   __u32 cpu_id_start;
   __u32 cpu_id;
-  union {
-    __u64 ptr64;
-#ifdef __LP64__
-    __u64 ptr;
-#else
-    struct {
-#if defined(__BYTE_ORDER) && __BYTE_ORDER == __BIG_ENDIAN || defined(__BIG_ENDIAN)
-      __u32 padding;
-      __u32 ptr32;
-#else
-      __u32 ptr32;
-      __u32 padding;
-#endif
-    } ptr;
-#endif
-  } rseq_cs;
+  __u64 rseq_cs;
   __u32 flags;
 } __attribute__((aligned(4 * sizeof(__u64))));
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/rtc.h b/sysroots/i686-linux-musl/include/linux/rtc.h
index cf5f22a..d75bc45 100644
--- a/sysroots/i686-linux-musl/include/linux/rtc.h
+++ b/sysroots/i686-linux-musl/include/linux/rtc.h
@@ -96,7 +96,8 @@
 #define RTC_FEATURE_UPDATE_INTERRUPT 4
 #define RTC_FEATURE_CORRECTION 5
 #define RTC_FEATURE_BACKUP_SWITCH_MODE 6
-#define RTC_FEATURE_CNT 7
+#define RTC_FEATURE_ALARM_WAKEUP_ONLY 7
+#define RTC_FEATURE_CNT 8
 #define RTC_PARAM_FEATURES 0
 #define RTC_PARAM_CORRECTION 1
 #define RTC_PARAM_BACKUP_SWITCH_MODE 2
diff --git a/sysroots/i686-linux-musl/include/linux/rtnetlink.h b/sysroots/i686-linux-musl/include/linux/rtnetlink.h
index 91c3ee4..321e487 100644
--- a/sysroots/i686-linux-musl/include/linux/rtnetlink.h
+++ b/sysroots/i686-linux-musl/include/linux/rtnetlink.h
@@ -131,6 +131,8 @@
 #define RTM_NEWSTATS RTM_NEWSTATS
   RTM_GETSTATS = 94,
 #define RTM_GETSTATS RTM_GETSTATS
+  RTM_SETSTATS,
+#define RTM_SETSTATS RTM_SETSTATS
   RTM_NEWCACHEREPORT = 96,
 #define RTM_NEWCACHEREPORT RTM_NEWCACHEREPORT
   RTM_NEWCHAIN = 100,
@@ -163,6 +165,12 @@
 #define RTM_DELNEXTHOPBUCKET RTM_DELNEXTHOPBUCKET
   RTM_GETNEXTHOPBUCKET,
 #define RTM_GETNEXTHOPBUCKET RTM_GETNEXTHOPBUCKET
+  RTM_NEWTUNNEL = 120,
+#define RTM_NEWTUNNEL RTM_NEWTUNNEL
+  RTM_DELTUNNEL,
+#define RTM_DELTUNNEL RTM_DELTUNNEL
+  RTM_GETTUNNEL,
+#define RTM_GETTUNNEL RTM_GETTUNNEL
   __RTM_MAX,
 #define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1)
 };
@@ -561,6 +569,10 @@
 #define RTNLGRP_BRVLAN RTNLGRP_BRVLAN
   RTNLGRP_MCTP_IFADDR,
 #define RTNLGRP_MCTP_IFADDR RTNLGRP_MCTP_IFADDR
+  RTNLGRP_TUNNEL,
+#define RTNLGRP_TUNNEL RTNLGRP_TUNNEL
+  RTNLGRP_STATS,
+#define RTNLGRP_STATS RTNLGRP_STATS
   __RTNLGRP_MAX
 };
 #define RTNLGRP_MAX (__RTNLGRP_MAX - 1)
@@ -592,4 +604,5 @@
 #define RTEXT_FILTER_MRP (1 << 4)
 #define RTEXT_FILTER_CFM_CONFIG (1 << 5)
 #define RTEXT_FILTER_CFM_STATUS (1 << 6)
+#define RTEXT_FILTER_MST (1 << 7)
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/serial_core.h b/sysroots/i686-linux-musl/include/linux/serial_core.h
index 0caf698..b99c7d4 100644
--- a/sysroots/i686-linux-musl/include/linux/serial_core.h
+++ b/sysroots/i686-linux-musl/include/linux/serial_core.h
@@ -47,6 +47,7 @@
 #define PORT_SUNSAB 39
 #define PORT_NPCM 40
 #define PORT_TEGRA_TCU 41
+#define PORT_ASPEED_VUART 42
 #define PORT_PCH_8LINE 44
 #define PORT_PCH_2LINE 45
 #define PORT_DZ 46
@@ -122,4 +123,5 @@
 #define PORT_SIFIVE_V0 120
 #define PORT_SUNIX 121
 #define PORT_LINFLEXUART 122
+#define PORT_SUNPLUS 123
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/smc.h b/sysroots/i686-linux-musl/include/linux/smc.h
index 01494da..be6b71f 100644
--- a/sysroots/i686-linux-musl/include/linux/smc.h
+++ b/sysroots/i686-linux-musl/include/linux/smc.h
@@ -57,6 +57,9 @@
   SMC_NETLINK_DUMP_SEID,
   SMC_NETLINK_ENABLE_SEID,
   SMC_NETLINK_DISABLE_SEID,
+  SMC_NETLINK_DUMP_HS_LIMITATION,
+  SMC_NETLINK_ENABLE_HS_LIMITATION,
+  SMC_NETLINK_DISABLE_HS_LIMITATION,
 };
 enum {
   SMC_GEN_UNSPEC,
@@ -249,4 +252,11 @@
   __SMC_NLA_SEID_TABLE_MAX,
   SMC_NLA_SEID_TABLE_MAX = __SMC_NLA_SEID_TABLE_MAX - 1
 };
+enum {
+  SMC_NLA_HS_LIMITATION_UNSPEC,
+  SMC_NLA_HS_LIMITATION_ENABLED,
+  __SMC_NLA_HS_LIMITATION_MAX,
+  SMC_NLA_HS_LIMITATION_MAX = __SMC_NLA_HS_LIMITATION_MAX - 1
+};
+#define SMC_LIMIT_HS 1
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/socket.h b/sysroots/i686-linux-musl/include/linux/socket.h
index be16548..49dce45 100644
--- a/sysroots/i686-linux-musl/include/linux/socket.h
+++ b/sysroots/i686-linux-musl/include/linux/socket.h
@@ -32,4 +32,7 @@
 #define SOCK_SNDBUF_LOCK 1
 #define SOCK_RCVBUF_LOCK 2
 #define SOCK_BUF_LOCK_MASK (SOCK_SNDBUF_LOCK | SOCK_RCVBUF_LOCK)
+#define SOCK_TXREHASH_DEFAULT ((u8) - 1)
+#define SOCK_TXREHASH_DISABLED 0
+#define SOCK_TXREHASH_ENABLED 1
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/stddef.h b/sysroots/i686-linux-musl/include/linux/stddef.h
index d5cdf80..6bc6925 100644
--- a/sysroots/i686-linux-musl/include/linux/stddef.h
+++ b/sysroots/i686-linux-musl/include/linux/stddef.h
@@ -16,9 +16,12 @@
  ***
  ****************************************************************************
  ****************************************************************************/
+#ifndef _UAPI_LINUX_STDDEF_H
+#define _UAPI_LINUX_STDDEF_H
 #include <linux/compiler_types.h>
 #ifndef __always_inline
 #define __always_inline inline
 #endif
 #define __struct_group(TAG,NAME,ATTRS,MEMBERS...) union { struct { MEMBERS } ATTRS; struct TAG { MEMBERS } ATTRS NAME; }
 #define __DECLARE_FLEX_ARRAY(TYPE,NAME) struct { struct { } __empty_ ##NAME; TYPE NAME[]; }
+#endif
diff --git a/sysroots/i686-linux-musl/include/linux/thermal.h b/sysroots/i686-linux-musl/include/linux/thermal.h
index 72ea378..2f9dccb 100644
--- a/sysroots/i686-linux-musl/include/linux/thermal.h
+++ b/sysroots/i686-linux-musl/include/linux/thermal.h
@@ -54,6 +54,10 @@
   THERMAL_GENL_ATTR_CDEV_MAX_STATE,
   THERMAL_GENL_ATTR_CDEV_NAME,
   THERMAL_GENL_ATTR_GOV_NAME,
+  THERMAL_GENL_ATTR_CPU_CAPABILITY,
+  THERMAL_GENL_ATTR_CPU_CAPABILITY_ID,
+  THERMAL_GENL_ATTR_CPU_CAPABILITY_PERFORMANCE,
+  THERMAL_GENL_ATTR_CPU_CAPABILITY_EFFICIENCY,
   __THERMAL_GENL_ATTR_MAX,
 };
 #define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1)
@@ -77,6 +81,7 @@
   THERMAL_GENL_EVENT_CDEV_DELETE,
   THERMAL_GENL_EVENT_CDEV_STATE_UPDATE,
   THERMAL_GENL_EVENT_TZ_GOV_CHANGE,
+  THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE,
   __THERMAL_GENL_EVENT_MAX,
 };
 #define THERMAL_GENL_EVENT_MAX (__THERMAL_GENL_EVENT_MAX - 1)
diff --git a/sysroots/i686-linux-musl/include/linux/tipc_config.h b/sysroots/i686-linux-musl/include/linux/tipc_config.h
index a371e37..c6ee1d1 100644
--- a/sysroots/i686-linux-musl/include/linux/tipc_config.h
+++ b/sysroots/i686-linux-musl/include/linux/tipc_config.h
@@ -22,7 +22,6 @@
 #include <linux/string.h>
 #include <linux/tipc.h>
 #include <asm/byteorder.h>
-#include <arpa/inet.h>
 #define TIPC_CMD_NOOP 0x0000
 #define TIPC_CMD_GET_NODES 0x0001
 #define TIPC_CMD_GET_MEDIA_NAMES 0x0002
diff --git a/sysroots/i686-linux-musl/include/linux/tty.h b/sysroots/i686-linux-musl/include/linux/tty.h
index dcce572..fb2379e 100644
--- a/sysroots/i686-linux-musl/include/linux/tty.h
+++ b/sysroots/i686-linux-musl/include/linux/tty.h
@@ -18,7 +18,6 @@
  ****************************************************************************/
 #ifndef _UAPI_LINUX_TTY_H
 #define _UAPI_LINUX_TTY_H
-#define NR_LDISCS 30
 #define N_TTY 0
 #define N_SLIP 1
 #define N_MOUSE 2
@@ -48,4 +47,6 @@
 #define N_SPEAKUP 26
 #define N_NULL 27
 #define N_MCTP 28
+#define N_DEVELOPMENT 29
+#define NR_LDISCS 30
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/types.h b/sysroots/i686-linux-musl/include/linux/types.h
index 9145e66..ce82a24 100644
--- a/sysroots/i686-linux-musl/include/linux/types.h
+++ b/sysroots/i686-linux-musl/include/linux/types.h
@@ -21,8 +21,7 @@
 #include <asm/types.h>
 #ifndef __ASSEMBLY__
 #include <linux/posix_types.h>
-#define __bitwise__
-#define __bitwise __bitwise__
+#define __bitwise
 typedef __u16 __bitwise __le16;
 typedef __u16 __bitwise __be16;
 typedef __u32 __bitwise __le32;
diff --git a/sysroots/i686-linux-musl/include/linux/userfaultfd.h b/sysroots/i686-linux-musl/include/linux/userfaultfd.h
index ca7b7a5..3727d0a 100644
--- a/sysroots/i686-linux-musl/include/linux/userfaultfd.h
+++ b/sysroots/i686-linux-musl/include/linux/userfaultfd.h
@@ -21,7 +21,7 @@
 #include <linux/types.h>
 #define UFFD_API ((__u64) 0xAA)
 #define UFFD_API_REGISTER_MODES (UFFDIO_REGISTER_MODE_MISSING | UFFDIO_REGISTER_MODE_WP | UFFDIO_REGISTER_MODE_MINOR)
-#define UFFD_API_FEATURES (UFFD_FEATURE_PAGEFAULT_FLAG_WP | UFFD_FEATURE_EVENT_FORK | UFFD_FEATURE_EVENT_REMAP | UFFD_FEATURE_EVENT_REMOVE | UFFD_FEATURE_EVENT_UNMAP | UFFD_FEATURE_MISSING_HUGETLBFS | UFFD_FEATURE_MISSING_SHMEM | UFFD_FEATURE_SIGBUS | UFFD_FEATURE_THREAD_ID | UFFD_FEATURE_MINOR_HUGETLBFS | UFFD_FEATURE_MINOR_SHMEM)
+#define UFFD_API_FEATURES (UFFD_FEATURE_PAGEFAULT_FLAG_WP | UFFD_FEATURE_EVENT_FORK | UFFD_FEATURE_EVENT_REMAP | UFFD_FEATURE_EVENT_REMOVE | UFFD_FEATURE_EVENT_UNMAP | UFFD_FEATURE_MISSING_HUGETLBFS | UFFD_FEATURE_MISSING_SHMEM | UFFD_FEATURE_SIGBUS | UFFD_FEATURE_THREAD_ID | UFFD_FEATURE_MINOR_HUGETLBFS | UFFD_FEATURE_MINOR_SHMEM | UFFD_FEATURE_EXACT_ADDRESS)
 #define UFFD_API_IOCTLS ((__u64) 1 << _UFFDIO_REGISTER | (__u64) 1 << _UFFDIO_UNREGISTER | (__u64) 1 << _UFFDIO_API)
 #define UFFD_API_RANGE_IOCTLS ((__u64) 1 << _UFFDIO_WAKE | (__u64) 1 << _UFFDIO_COPY | (__u64) 1 << _UFFDIO_ZEROPAGE | (__u64) 1 << _UFFDIO_WRITEPROTECT | (__u64) 1 << _UFFDIO_CONTINUE)
 #define UFFD_API_RANGE_IOCTLS_BASIC ((__u64) 1 << _UFFDIO_WAKE | (__u64) 1 << _UFFDIO_COPY | (__u64) 1 << _UFFDIO_CONTINUE)
@@ -95,6 +95,7 @@
 #define UFFD_FEATURE_THREAD_ID (1 << 8)
 #define UFFD_FEATURE_MINOR_HUGETLBFS (1 << 9)
 #define UFFD_FEATURE_MINOR_SHMEM (1 << 10)
+#define UFFD_FEATURE_EXACT_ADDRESS (1 << 11)
   __u64 features;
   __u64 ioctls;
 };
diff --git a/sysroots/i686-linux-musl/include/linux/v4l2-controls.h b/sysroots/i686-linux-musl/include/linux/v4l2-controls.h
index 1a11355..43014ef 100644
--- a/sysroots/i686-linux-musl/include/linux/v4l2-controls.h
+++ b/sysroots/i686-linux-musl/include/linux/v4l2-controls.h
@@ -119,6 +119,7 @@
 #define V4L2_CID_USER_CODA_BASE (V4L2_CID_USER_BASE + 0x10e0)
 #define V4L2_CID_USER_CCS_BASE (V4L2_CID_USER_BASE + 0x10f0)
 #define V4L2_CID_USER_ALLEGRO_BASE (V4L2_CID_USER_BASE + 0x1170)
+#define V4L2_CID_USER_ISL7998X_BASE (V4L2_CID_USER_BASE + 0x1180)
 #define V4L2_CID_CODEC_BASE (V4L2_CTRL_CLASS_CODEC | 0x900)
 #define V4L2_CID_CODEC_CLASS (V4L2_CTRL_CLASS_CODEC | 1)
 #define V4L2_CID_MPEG_STREAM_TYPE (V4L2_CID_CODEC_BASE + 0)
@@ -1153,6 +1154,8 @@
 #define V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC 0x01
 #define V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC 0x02
 #define V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD 0x04
+#define V4L2_H264_DECODE_PARAM_FLAG_PFRAME 0x08
+#define V4L2_H264_DECODE_PARAM_FLAG_BFRAME 0x10
 #define V4L2_CID_STATELESS_H264_DECODE_PARAMS (V4L2_CID_CODEC_STATELESS_BASE + 7)
 struct v4l2_ctrl_h264_decode_params {
   struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES];
diff --git a/sysroots/i686-linux-musl/include/linux/version.h b/sysroots/i686-linux-musl/include/linux/version.h
index 2dfd696..2677406 100644
--- a/sysroots/i686-linux-musl/include/linux/version.h
+++ b/sysroots/i686-linux-musl/include/linux/version.h
@@ -16,8 +16,8 @@
  ***
  ****************************************************************************
  ****************************************************************************/
-#define LINUX_VERSION_CODE 332032
+#define LINUX_VERSION_CODE 332288
 #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + ((c) > 255 ? 255 : (c)))
 #define LINUX_VERSION_MAJOR 5
-#define LINUX_VERSION_PATCHLEVEL 17
+#define LINUX_VERSION_PATCHLEVEL 18
 #define LINUX_VERSION_SUBLEVEL 0
diff --git a/sysroots/i686-linux-musl/include/linux/vfio.h b/sysroots/i686-linux-musl/include/linux/vfio.h
index e0f322b..8075408 100644
--- a/sysroots/i686-linux-musl/include/linux/vfio.h
+++ b/sysroots/i686-linux-musl/include/linux/vfio.h
@@ -110,7 +110,7 @@
 #define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff)
 #define VFIO_REGION_TYPE_GFX (1)
 #define VFIO_REGION_TYPE_CCW (2)
-#define VFIO_REGION_TYPE_MIGRATION (3)
+#define VFIO_REGION_TYPE_MIGRATION_DEPRECATED (3)
 #define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION (1)
 #define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG (2)
 #define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG (3)
@@ -130,17 +130,17 @@
 #define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD (1)
 #define VFIO_REGION_SUBTYPE_CCW_SCHIB (2)
 #define VFIO_REGION_SUBTYPE_CCW_CRW (3)
-#define VFIO_REGION_SUBTYPE_MIGRATION (1)
+#define VFIO_REGION_SUBTYPE_MIGRATION_DEPRECATED (1)
 struct vfio_device_migration_info {
   __u32 device_state;
-#define VFIO_DEVICE_STATE_STOP (0)
-#define VFIO_DEVICE_STATE_RUNNING (1 << 0)
-#define VFIO_DEVICE_STATE_SAVING (1 << 1)
-#define VFIO_DEVICE_STATE_RESUMING (1 << 2)
-#define VFIO_DEVICE_STATE_MASK (VFIO_DEVICE_STATE_RUNNING | VFIO_DEVICE_STATE_SAVING | VFIO_DEVICE_STATE_RESUMING)
-#define VFIO_DEVICE_STATE_VALID(state) (state & VFIO_DEVICE_STATE_RESUMING ? (state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_RESUMING : 1)
-#define VFIO_DEVICE_STATE_IS_ERROR(state) ((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_SAVING | VFIO_DEVICE_STATE_RESUMING))
-#define VFIO_DEVICE_STATE_SET_ERROR(state) ((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_SATE_SAVING | VFIO_DEVICE_STATE_RESUMING)
+#define VFIO_DEVICE_STATE_V1_STOP (0)
+#define VFIO_DEVICE_STATE_V1_RUNNING (1 << 0)
+#define VFIO_DEVICE_STATE_V1_SAVING (1 << 1)
+#define VFIO_DEVICE_STATE_V1_RESUMING (1 << 2)
+#define VFIO_DEVICE_STATE_MASK (VFIO_DEVICE_STATE_V1_RUNNING | VFIO_DEVICE_STATE_V1_SAVING | VFIO_DEVICE_STATE_V1_RESUMING)
+#define VFIO_DEVICE_STATE_VALID(state) (state & VFIO_DEVICE_STATE_V1_RESUMING ? (state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_V1_RESUMING : 1)
+#define VFIO_DEVICE_STATE_IS_ERROR(state) ((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_V1_SAVING | VFIO_DEVICE_STATE_V1_RESUMING))
+#define VFIO_DEVICE_STATE_SET_ERROR(state) ((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_STATE_V1_SAVING | VFIO_DEVICE_STATE_V1_RESUMING)
   __u32 reserved;
   __u64 pending_bytes;
   __u64 data_offset;
@@ -285,6 +285,25 @@
 };
 #define VFIO_DEVICE_FEATURE _IO(VFIO_TYPE, VFIO_BASE + 17)
 #define VFIO_DEVICE_FEATURE_PCI_VF_TOKEN (0)
+struct vfio_device_feature_migration {
+  __aligned_u64 flags;
+#define VFIO_MIGRATION_STOP_COPY (1 << 0)
+#define VFIO_MIGRATION_P2P (1 << 1)
+};
+#define VFIO_DEVICE_FEATURE_MIGRATION 1
+struct vfio_device_feature_mig_state {
+  __u32 device_state;
+  __s32 data_fd;
+};
+#define VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE 2
+enum vfio_device_mig_state {
+  VFIO_DEVICE_STATE_ERROR = 0,
+  VFIO_DEVICE_STATE_STOP = 1,
+  VFIO_DEVICE_STATE_RUNNING = 2,
+  VFIO_DEVICE_STATE_STOP_COPY = 3,
+  VFIO_DEVICE_STATE_RESUMING = 4,
+  VFIO_DEVICE_STATE_RUNNING_P2P = 5,
+};
 struct vfio_iommu_type1_info {
   __u32 argsz;
   __u32 flags;
diff --git a/sysroots/i686-linux-musl/include/linux/vhost.h b/sysroots/i686-linux-musl/include/linux/vhost.h
index 53b01c4..7769beb 100644
--- a/sysroots/i686-linux-musl/include/linux/vhost.h
+++ b/sysroots/i686-linux-musl/include/linux/vhost.h
@@ -64,4 +64,6 @@
 #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16)
 #define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int)
 #define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, struct vhost_vdpa_iova_range)
+#define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32)
+#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32)
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/videodev2.h b/sysroots/i686-linux-musl/include/linux/videodev2.h
index 1cae711..55c1a95 100644
--- a/sysroots/i686-linux-musl/include/linux/videodev2.h
+++ b/sysroots/i686-linux-musl/include/linux/videodev2.h
@@ -24,7 +24,7 @@
 #include <linux/types.h>
 #include <linux/v4l2-common.h>
 #include <linux/v4l2-controls.h>
-#define VIDEO_MAX_FRAME 32
+#define VIDEO_MAX_FRAME 64
 #define VIDEO_MAX_PLANES 8
 #define v4l2_fourcc(a,b,c,d) ((__u32) (a) | ((__u32) (b) << 8) | ((__u32) (c) << 16) | ((__u32) (d) << 24))
 #define v4l2_fourcc_be(a,b,c,d) (v4l2_fourcc(a, b, c, d) | (1U << 31))
@@ -300,6 +300,8 @@
 #define V4L2_PIX_FMT_NV12_32L32 v4l2_fourcc('S', 'T', '1', '2')
 #define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2')
 #define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2')
+#define V4L2_PIX_FMT_NV12M_8L128 v4l2_fourcc('N', 'A', '1', '2')
+#define V4L2_PIX_FMT_NV12M_10BE_8L128 v4l2_fourcc_be('N', 'T', '1', '2')
 #define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1')
 #define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G')
 #define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G')
diff --git a/sysroots/i686-linux-musl/include/linux/virtio_config.h b/sysroots/i686-linux-musl/include/linux/virtio_config.h
index 6198fd1..30e552b 100644
--- a/sysroots/i686-linux-musl/include/linux/virtio_config.h
+++ b/sysroots/i686-linux-musl/include/linux/virtio_config.h
@@ -35,6 +35,7 @@
 #define VIRTIO_F_ACCESS_PLATFORM 33
 #define VIRTIO_F_IOMMU_PLATFORM VIRTIO_F_ACCESS_PLATFORM
 #define VIRTIO_F_RING_PACKED 34
+#define VIRTIO_F_IN_ORDER 35
 #define VIRTIO_F_ORDER_PLATFORM 36
 #define VIRTIO_F_SR_IOV 37
 #endif
diff --git a/sysroots/i686-linux-musl/include/linux/virtio_crypto.h b/sysroots/i686-linux-musl/include/linux/virtio_crypto.h
index 2ce760f..7d7561d 100644
--- a/sysroots/i686-linux-musl/include/linux/virtio_crypto.h
+++ b/sysroots/i686-linux-musl/include/linux/virtio_crypto.h
@@ -26,6 +26,7 @@
 #define VIRTIO_CRYPTO_SERVICE_HASH 1
 #define VIRTIO_CRYPTO_SERVICE_MAC 2
 #define VIRTIO_CRYPTO_SERVICE_AEAD 3
+#define VIRTIO_CRYPTO_SERVICE_AKCIPHER 4
 #define VIRTIO_CRYPTO_OPCODE(service,op) (((service) << 8) | (op))
 struct virtio_crypto_ctrl_header {
 #define VIRTIO_CRYPTO_CIPHER_CREATE_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x02)
@@ -36,6 +37,8 @@
 #define VIRTIO_CRYPTO_MAC_DESTROY_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x03)
 #define VIRTIO_CRYPTO_AEAD_CREATE_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x02)
 #define VIRTIO_CRYPTO_AEAD_DESTROY_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x03)
+#define VIRTIO_CRYPTO_AKCIPHER_CREATE_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x04)
+#define VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x05)
   __le32 opcode;
   __le32 algo;
   __le32 flag;
@@ -137,6 +140,51 @@
   struct virtio_crypto_aead_session_para para;
   __u8 padding[32];
 };
+struct virtio_crypto_rsa_session_para {
+#define VIRTIO_CRYPTO_RSA_RAW_PADDING 0
+#define VIRTIO_CRYPTO_RSA_PKCS1_PADDING 1
+  __le32 padding_algo;
+#define VIRTIO_CRYPTO_RSA_NO_HASH 0
+#define VIRTIO_CRYPTO_RSA_MD2 1
+#define VIRTIO_CRYPTO_RSA_MD3 2
+#define VIRTIO_CRYPTO_RSA_MD4 3
+#define VIRTIO_CRYPTO_RSA_MD5 4
+#define VIRTIO_CRYPTO_RSA_SHA1 5
+#define VIRTIO_CRYPTO_RSA_SHA256 6
+#define VIRTIO_CRYPTO_RSA_SHA384 7
+#define VIRTIO_CRYPTO_RSA_SHA512 8
+#define VIRTIO_CRYPTO_RSA_SHA224 9
+  __le32 hash_algo;
+};
+struct virtio_crypto_ecdsa_session_para {
+#define VIRTIO_CRYPTO_CURVE_UNKNOWN 0
+#define VIRTIO_CRYPTO_CURVE_NIST_P192 1
+#define VIRTIO_CRYPTO_CURVE_NIST_P224 2
+#define VIRTIO_CRYPTO_CURVE_NIST_P256 3
+#define VIRTIO_CRYPTO_CURVE_NIST_P384 4
+#define VIRTIO_CRYPTO_CURVE_NIST_P521 5
+  __le32 curve_id;
+  __le32 padding;
+};
+struct virtio_crypto_akcipher_session_para {
+#define VIRTIO_CRYPTO_NO_AKCIPHER 0
+#define VIRTIO_CRYPTO_AKCIPHER_RSA 1
+#define VIRTIO_CRYPTO_AKCIPHER_DSA 2
+#define VIRTIO_CRYPTO_AKCIPHER_ECDSA 3
+  __le32 algo;
+#define VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PUBLIC 1
+#define VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PRIVATE 2
+  __le32 keytype;
+  __le32 keylen;
+  union {
+    struct virtio_crypto_rsa_session_para rsa;
+    struct virtio_crypto_ecdsa_session_para ecdsa;
+  } u;
+};
+struct virtio_crypto_akcipher_create_session_req {
+  struct virtio_crypto_akcipher_session_para para;
+  __u8 padding[36];
+};
 struct virtio_crypto_alg_chain_session_para {
 #define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER 1
 #define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH 2
@@ -180,6 +228,7 @@
     struct virtio_crypto_hash_create_session_req hash_create_session;
     struct virtio_crypto_mac_create_session_req mac_create_session;
     struct virtio_crypto_aead_create_session_req aead_create_session;
+    struct virtio_crypto_akcipher_create_session_req akcipher_create_session;
     struct virtio_crypto_destroy_session_req destroy_session;
     __u8 padding[56];
   } u;
@@ -191,6 +240,10 @@
 #define VIRTIO_CRYPTO_MAC VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x00)
 #define VIRTIO_CRYPTO_AEAD_ENCRYPT VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x00)
 #define VIRTIO_CRYPTO_AEAD_DECRYPT VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x01)
+#define VIRTIO_CRYPTO_AKCIPHER_ENCRYPT VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x00)
+#define VIRTIO_CRYPTO_AKCIPHER_DECRYPT VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x01)
+#define VIRTIO_CRYPTO_AKCIPHER_SIGN VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x02)
+#define VIRTIO_CRYPTO_AKCIPHER_VERIFY VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x03)
   __le32 opcode;
   __le32 algo;
   __le64 session_id;
@@ -256,6 +309,14 @@
   struct virtio_crypto_aead_para para;
   __u8 padding[32];
 };
+struct virtio_crypto_akcipher_para {
+  __le32 src_data_len;
+  __le32 dst_data_len;
+};
+struct virtio_crypto_akcipher_data_req {
+  struct virtio_crypto_akcipher_para para;
+  __u8 padding[40];
+};
 struct virtio_crypto_op_data_req {
   struct virtio_crypto_op_header header;
   union {
@@ -263,6 +324,7 @@
     struct virtio_crypto_hash_data_req hash_req;
     struct virtio_crypto_mac_data_req mac_req;
     struct virtio_crypto_aead_data_req aead_req;
+    struct virtio_crypto_akcipher_data_req akcipher_req;
     __u8 padding[48];
   } u;
 };
@@ -271,6 +333,8 @@
 #define VIRTIO_CRYPTO_BADMSG 2
 #define VIRTIO_CRYPTO_NOTSUPP 3
 #define VIRTIO_CRYPTO_INVSESS 4
+#define VIRTIO_CRYPTO_NOSPC 5
+#define VIRTIO_CRYPTO_KEY_REJECTED 6
 #define VIRTIO_CRYPTO_S_HW_READY (1 << 0)
 struct virtio_crypto_config {
   __le32 status;
@@ -284,7 +348,7 @@
   __le32 aead_algo;
   __le32 max_cipher_key_len;
   __le32 max_auth_key_len;
-  __le32 reserve;
+  __le32 akcipher_algo;
   __le64 max_size;
 };
 struct virtio_crypto_inhdr {
diff --git a/sysroots/i686-linux-musl/include/linux/virtio_ids.h b/sysroots/i686-linux-musl/include/linux/virtio_ids.h
index 2894700..b31ed93 100644
--- a/sysroots/i686-linux-musl/include/linux/virtio_ids.h
+++ b/sysroots/i686-linux-musl/include/linux/virtio_ids.h
@@ -57,11 +57,11 @@
 #define VIRTIO_ID_AUDIO_POLICY 39
 #define VIRTIO_ID_BT 40
 #define VIRTIO_ID_GPIO 41
-#define VIRTIO_TRANS_ID_NET 1000
-#define VIRTIO_TRANS_ID_BLOCK 1001
-#define VIRTIO_TRANS_ID_BALLOON 1002
-#define VIRTIO_TRANS_ID_CONSOLE 1003
-#define VIRTIO_TRANS_ID_SCSI 1004
-#define VIRTIO_TRANS_ID_RNG 1005
-#define VIRTIO_TRANS_ID_9P 1009
+#define VIRTIO_TRANS_ID_NET 0x1000
+#define VIRTIO_TRANS_ID_BLOCK 0x1001
+#define VIRTIO_TRANS_ID_BALLOON 0x1002
+#define VIRTIO_TRANS_ID_CONSOLE 0x1003
+#define VIRTIO_TRANS_ID_SCSI 0x1004
+#define VIRTIO_TRANS_ID_RNG 0x1005
+#define VIRTIO_TRANS_ID_9P 0x1009
 #endif
diff --git a/sysroots/i686-linux-musl/include/misc/fastrpc.h b/sysroots/i686-linux-musl/include/misc/fastrpc.h
index 62955ec..e82b961 100644
--- a/sysroots/i686-linux-musl/include/misc/fastrpc.h
+++ b/sysroots/i686-linux-musl/include/misc/fastrpc.h
@@ -27,11 +27,32 @@
 #define FASTRPC_IOCTL_MMAP _IOWR('R', 6, struct fastrpc_req_mmap)
 #define FASTRPC_IOCTL_MUNMAP _IOWR('R', 7, struct fastrpc_req_munmap)
 #define FASTRPC_IOCTL_INIT_ATTACH_SNS _IO('R', 8)
+#define FASTRPC_IOCTL_MEM_MAP _IOWR('R', 10, struct fastrpc_mem_map)
+#define FASTRPC_IOCTL_MEM_UNMAP _IOWR('R', 11, struct fastrpc_mem_unmap)
+#define FASTRPC_IOCTL_GET_DSP_INFO _IOWR('R', 13, struct fastrpc_ioctl_capability)
+enum fastrpc_map_flags {
+  FASTRPC_MAP_STATIC = 0,
+  FASTRPC_MAP_RESERVED,
+  FASTRPC_MAP_FD = 2,
+  FASTRPC_MAP_FD_DELAYED,
+  FASTRPC_MAP_FD_NOMAP = 16,
+  FASTRPC_MAP_MAX,
+};
+enum fastrpc_proc_attr {
+  FASTRPC_MODE_DEBUG = (1 << 0),
+  FASTRPC_MODE_PTRACE = (1 << 1),
+  FASTRPC_MODE_CRC = (1 << 2),
+  FASTRPC_MODE_UNSIGNED_MODULE = (1 << 3),
+  FASTRPC_MODE_ADAPTIVE_QOS = (1 << 4),
+  FASTRPC_MODE_SYSTEM_PROCESS = (1 << 5),
+  FASTRPC_MODE_PRIVILEGED = (1 << 6),
+};
+#define FASTRPC_ATTR_SECUREMAP (1)
 struct fastrpc_invoke_args {
   __u64 ptr;
   __u64 length;
   __s32 fd;
-  __u32 reserved;
+  __u32 attr;
 };
 struct fastrpc_invoke {
   __u32 handle;
@@ -57,8 +78,32 @@
   __u64 size;
   __u64 vaddrout;
 };
+struct fastrpc_mem_map {
+  __s32 version;
+  __s32 fd;
+  __s32 offset;
+  __u32 flags;
+  __u64 vaddrin;
+  __u64 length;
+  __u64 vaddrout;
+  __s32 attrs;
+  __s32 reserved[4];
+};
 struct fastrpc_req_munmap {
   __u64 vaddrout;
   __u64 size;
 };
+struct fastrpc_mem_unmap {
+  __s32 vesion;
+  __s32 fd;
+  __u64 vaddr;
+  __u64 length;
+  __s32 reserved[5];
+};
+struct fastrpc_ioctl_capability {
+  __u32 domain;
+  __u32 attribute_id;
+  __u32 capability;
+  __u32 reserved[4];
+};
 #endif
diff --git a/sysroots/i686-linux-musl/include/misc/habanalabs.h b/sysroots/i686-linux-musl/include/misc/habanalabs.h
index 6e3439a..f9e1bb9 100644
--- a/sysroots/i686-linux-musl/include/misc/habanalabs.h
+++ b/sysroots/i686-linux-musl/include/misc/habanalabs.h
@@ -24,6 +24,7 @@
 #define GAUDI_DRIVER_SRAM_RESERVED_SIZE_FROM_START 0x80
 #define GAUDI_FIRST_AVAILABLE_W_S_SYNC_OBJECT 144
 #define GAUDI_FIRST_AVAILABLE_W_S_MONITOR 72
+#define TS_MAX_ELEMENTS_NUM (1 << 20)
 enum goya_queue_id {
   GOYA_QUEUE_ID_DMA_0 = 0,
   GOYA_QUEUE_ID_DMA_1 = 1,
@@ -294,6 +295,9 @@
   __u8 card_name[HL_INFO_CARD_NAME_MAX_LEN];
   __u64 reserved2;
   __u64 dram_page_size;
+  __u32 reserved3;
+  __u16 number_of_user_interrupts;
+  __u16 pad2;
 };
 struct hl_info_dram_usage {
   __u64 dram_free_mem;
@@ -512,6 +516,7 @@
 #define HL_WAIT_CS_FLAGS_INTERRUPT_MASK 0xFFF00000
 #define HL_WAIT_CS_FLAGS_MULTI_CS 0x4
 #define HL_WAIT_CS_FLAGS_INTERRUPT_KERNEL_CQ 0x10
+#define HL_WAIT_CS_FLAGS_REGISTER_INTERRUPT 0x20
 #define HL_WAIT_MULTI_CS_LIST_MAX_LEN 32
 struct hl_wait_cs_in {
   union {
@@ -537,6 +542,8 @@
     __u64 interrupt_timeout_us;
   };
   __u64 cq_counters_offset;
+  __u64 timestamp_handle;
+  __u64 timestamp_offset;
 };
 #define HL_WAIT_CS_STATUS_COMPLETED 0
 #define HL_WAIT_CS_STATUS_BUSY 1
@@ -561,6 +568,7 @@
 #define HL_MEM_OP_UNMAP 3
 #define HL_MEM_OP_MAP_BLOCK 4
 #define HL_MEM_OP_EXPORT_DMABUF_FD 5
+#define HL_MEM_OP_TS_ALLOC 6
 #define HL_MEM_CONTIGUOUS 0x1
 #define HL_MEM_SHARED 0x2
 #define HL_MEM_USERPTR 0x4
@@ -569,6 +577,7 @@
   union {
     struct {
       __u64 mem_size;
+      __u64 page_size;
     } alloc;
     struct {
       __u64 handle;
@@ -596,7 +605,7 @@
   __u32 op;
   __u32 flags;
   __u32 ctx_id;
-  __u32 pad;
+  __u32 num_of_elements;
 };
 struct hl_mem_out {
   union {
diff --git a/sysroots/i686-linux-musl/include/netinet/if_ether.h b/sysroots/i686-linux-musl/include/netinet/if_ether.h
index 55a2ff1..3479f51 100644
--- a/sysroots/i686-linux-musl/include/netinet/if_ether.h
+++ b/sysroots/i686-linux-musl/include/netinet/if_ether.h
@@ -66,6 +66,7 @@
 #define ETH_P_1588	0x88F7
 #define ETH_P_NCSI	0x88F8
 #define ETH_P_PRP	0x88FB
+#define ETH_P_CFM	0x8902
 #define ETH_P_FCOE	0x8906
 #define ETH_P_TDLS	0x890D
 #define ETH_P_FIP	0x8914
diff --git a/sysroots/i686-linux-musl/include/netinet/in.h b/sysroots/i686-linux-musl/include/netinet/in.h
index f959433..fb628b6 100644
--- a/sysroots/i686-linux-musl/include/netinet/in.h
+++ b/sysroots/i686-linux-musl/include/netinet/in.h
@@ -48,6 +48,7 @@
 #define INADDR_BROADCAST  ((in_addr_t) 0xffffffff)
 #define INADDR_NONE       ((in_addr_t) 0xffffffff)
 #define INADDR_LOOPBACK   ((in_addr_t) 0x7f000001)
+#define INADDR_DUMMY      ((in_addr_t) 0xc0000008)
 
 #define INADDR_UNSPEC_GROUP     ((in_addr_t) 0xe0000000)
 #define INADDR_ALLHOSTS_GROUP   ((in_addr_t) 0xe0000001)
diff --git a/sysroots/i686-linux-musl/include/netinet/tcp.h b/sysroots/i686-linux-musl/include/netinet/tcp.h
index b7b997f..fad1d84 100644
--- a/sysroots/i686-linux-musl/include/netinet/tcp.h
+++ b/sysroots/i686-linux-musl/include/netinet/tcp.h
@@ -80,6 +80,8 @@
 	TCP_NLA_SRTT,
 	TCP_NLA_TIMEOUT_REHASH,
 	TCP_NLA_BYTES_NOTSENT,
+	TCP_NLA_EDT,
+	TCP_NLA_TTL,
 };
 
 #if defined(_GNU_SOURCE) || defined(_BSD_SOURCE)
@@ -281,12 +283,21 @@
 	uint32_t rcv_wup;
 };
 
+#define TCP_RECEIVE_ZEROCOPY_FLAG_TLB_CLEAN_HINT 0x1
+
 struct tcp_zerocopy_receive {
 	uint64_t address;
 	uint32_t length;
 	uint32_t recv_skip_hint;
 	uint32_t inq;
 	int32_t err;
+	uint64_t copybuf_address;
+	int32_t copybuf_len;
+	uint32_t flags;
+	uint64_t msg_control;
+	uint64_t msg_controllen;
+	uint32_t msg_flags;
+	uint32_t reserved;
 };
 
 #endif
diff --git a/sysroots/i686-linux-musl/include/signal.h b/sysroots/i686-linux-musl/include/signal.h
index 3ad38c8..b6711bc 100644
--- a/sysroots/i686-linux-musl/include/signal.h
+++ b/sysroots/i686-linux-musl/include/signal.h
@@ -178,6 +178,9 @@
 #define sa_handler   __sa_handler.sa_handler
 #define sa_sigaction __sa_handler.sa_sigaction
 
+#define SA_UNSUPPORTED 0x00000400
+#define SA_EXPOSE_TAGBITS 0x00000800
+
 struct sigevent {
 	union sigval sigev_value;
 	int sigev_signo;
@@ -262,6 +265,9 @@
 #if defined(_BSD_SOURCE) || defined(_GNU_SOURCE)
 #define NSIG _NSIG
 typedef void (*sig_t)(int);
+
+#define SYS_SECCOMP 1
+#define SYS_USER_DISPATCH 2
 #endif
 
 #ifdef _GNU_SOURCE
diff --git a/sysroots/i686-linux-musl/include/sound/sof/abi.h b/sysroots/i686-linux-musl/include/sound/sof/abi.h
index 3af3c9d..810a0b4 100644
--- a/sysroots/i686-linux-musl/include/sound/sof/abi.h
+++ b/sysroots/i686-linux-musl/include/sound/sof/abi.h
@@ -19,8 +19,8 @@
 #ifndef __INCLUDE_UAPI_SOUND_SOF_ABI_H__
 #define __INCLUDE_UAPI_SOUND_SOF_ABI_H__
 #define SOF_ABI_MAJOR 3
-#define SOF_ABI_MINOR 18
-#define SOF_ABI_PATCH 0
+#define SOF_ABI_MINOR 19
+#define SOF_ABI_PATCH 1
 #define SOF_ABI_MAJOR_SHIFT 24
 #define SOF_ABI_MAJOR_MASK 0xff
 #define SOF_ABI_MINOR_SHIFT 12
diff --git a/sysroots/i686-linux-musl/include/sys/prctl.h b/sysroots/i686-linux-musl/include/sys/prctl.h
index 4ba73f4..087a75c 100644
--- a/sysroots/i686-linux-musl/include/sys/prctl.h
+++ b/sysroots/i686-linux-musl/include/sys/prctl.h
@@ -168,6 +168,15 @@
 #define PR_SET_IO_FLUSHER 57
 #define PR_GET_IO_FLUSHER 58
 
+#define PR_SET_SYSCALL_USER_DISPATCH 59
+#define PR_SYS_DISPATCH_OFF 0
+#define PR_SYS_DISPATCH_ON 1
+#define SYSCALL_DISPATCH_FILTER_ALLOW 0
+#define SYSCALL_DISPATCH_FILTER_BLOCK 1
+
+#define PR_PAC_SET_ENABLED_KEYS 60
+#define PR_PAC_GET_ENABLED_KEYS 61
+
 int prctl (int, ...);
 
 #ifdef __cplusplus
diff --git a/sysroots/i686-linux-musl/include/sys/ptrace.h b/sysroots/i686-linux-musl/include/sys/ptrace.h
index 5d62a98..c72e3c0 100644
--- a/sysroots/i686-linux-musl/include/sys/ptrace.h
+++ b/sysroots/i686-linux-musl/include/sys/ptrace.h
@@ -42,6 +42,7 @@
 #define PTRACE_SECCOMP_GET_FILTER 0x420c
 #define PTRACE_SECCOMP_GET_METADATA 0x420d
 #define PTRACE_GET_SYSCALL_INFO 0x420e
+#define PTRACE_GET_RSEQ_CONFIGURATION	0x420f
 
 #define PT_READ_I PTRACE_PEEKTEXT
 #define PT_READ_D PTRACE_PEEKDATA
@@ -130,6 +131,14 @@
 	};
 };
 
+struct __ptrace_rseq_configuration {
+	uint64_t rseq_abi_pointer;
+	uint32_t rseq_abi_size;
+	uint32_t signature;
+	uint32_t flags;
+	uint32_t pad;
+};
+
 long ptrace(int, ...);
 
 #ifdef __cplusplus
diff --git a/sysroots/i686-linux-musl/include/sys/socket.h b/sysroots/i686-linux-musl/include/sys/socket.h
index cc06bdf..0b39d83 100644
--- a/sysroots/i686-linux-musl/include/sys/socket.h
+++ b/sysroots/i686-linux-musl/include/sys/socket.h
@@ -289,6 +289,8 @@
 #define SCM_TXTIME              SO_TXTIME
 #define SO_BINDTOIFINDEX        62
 #define SO_DETACH_REUSEPORT_BPF 68
+#define SO_PREFER_BUSY_POLL     69
+#define SO_BUSY_POLL_BUDGET     70
 
 #ifndef SOL_SOCKET
 #define SOL_SOCKET      1
diff --git a/sysroots/i686-linux-musl/include/zconf.h b/sysroots/i686-linux-musl/include/zconf.h
new file mode 100644
index 0000000..7b3f8da
--- /dev/null
+++ b/sysroots/i686-linux-musl/include/zconf.h
@@ -0,0 +1,553 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+// ANDROID CHNAGE: Upstream chromium renames all the functions; we don't want
+// that.
+#define CHROMIUM_ZLIB_NO_CHROMECONF
+
+/*
+ * This library is also built as a part of AOSP, which does not need to include
+ * chromeconf.h. This config does not want chromeconf.h, so it can set this
+ * macro to opt out. While this works today, there's no guarantee that building
+ * zlib outside of Chromium keeps working in the future.
+ */
+#if !defined(CHROMIUM_ZLIB_NO_CHROMECONF)
+/* This include does prefixing as below, but with an updated set of names.  Also
+ * sets up export macros in component builds. */
+#include "chromeconf.h"
+#endif
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
+ */
+#ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET
+
+/* all linked symbols and init macros */
+#  define _dist_code            z__dist_code
+#  define _length_code          z__length_code
+#  define _tr_align             z__tr_align
+#  define _tr_flush_bits        z__tr_flush_bits
+#  define _tr_flush_block       z__tr_flush_block
+#  define _tr_init              z__tr_init
+#  define _tr_stored_block      z__tr_stored_block
+#  define _tr_tally             z__tr_tally
+#  define adler32               z_adler32
+#  define adler32_combine       z_adler32_combine
+#  define adler32_combine64     z_adler32_combine64
+#  define adler32_z             z_adler32_z
+#  ifndef Z_SOLO
+#    define compress              z_compress
+#    define compress2             z_compress2
+#    define compressBound         z_compressBound
+#  endif
+#  define crc32                 z_crc32
+#  define crc32_combine         z_crc32_combine
+#  define crc32_combine64       z_crc32_combine64
+#  define crc32_z               z_crc32_z
+#  define deflate               z_deflate
+#  define deflateBound          z_deflateBound
+#  define deflateCopy           z_deflateCopy
+#  define deflateEnd            z_deflateEnd
+#  define deflateGetDictionary  z_deflateGetDictionary
+#  define deflateInit           z_deflateInit
+#  define deflateInit2          z_deflateInit2
+#  define deflateInit2_         z_deflateInit2_
+#  define deflateInit_          z_deflateInit_
+#  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
+#  define deflatePrime          z_deflatePrime
+#  define deflateReset          z_deflateReset
+#  define deflateResetKeep      z_deflateResetKeep
+#  define deflateSetDictionary  z_deflateSetDictionary
+#  define deflateSetHeader      z_deflateSetHeader
+#  define deflateTune           z_deflateTune
+#  define deflate_copyright     z_deflate_copyright
+#  define get_crc_table         z_get_crc_table
+#  ifndef Z_SOLO
+#    define gz_error              z_gz_error
+#    define gz_intmax             z_gz_intmax
+#    define gz_strwinerror        z_gz_strwinerror
+#    define gzbuffer              z_gzbuffer
+#    define gzclearerr            z_gzclearerr
+#    define gzclose               z_gzclose
+#    define gzclose_r             z_gzclose_r
+#    define gzclose_w             z_gzclose_w
+#    define gzdirect              z_gzdirect
+#    define gzdopen               z_gzdopen
+#    define gzeof                 z_gzeof
+#    define gzerror               z_gzerror
+#    define gzflush               z_gzflush
+#    define gzfread               z_gzfread
+#    define gzfwrite              z_gzfwrite
+#    define gzgetc                z_gzgetc
+#    define gzgetc_               z_gzgetc_
+#    define gzgets                z_gzgets
+#    define gzoffset              z_gzoffset
+#    define gzoffset64            z_gzoffset64
+#    define gzopen                z_gzopen
+#    define gzopen64              z_gzopen64
+#    ifdef _WIN32
+#      define gzopen_w              z_gzopen_w
+#    endif
+#    define gzprintf              z_gzprintf
+#    define gzputc                z_gzputc
+#    define gzputs                z_gzputs
+#    define gzread                z_gzread
+#    define gzrewind              z_gzrewind
+#    define gzseek                z_gzseek
+#    define gzseek64              z_gzseek64
+#    define gzsetparams           z_gzsetparams
+#    define gztell                z_gztell
+#    define gztell64              z_gztell64
+#    define gzungetc              z_gzungetc
+#    define gzvprintf             z_gzvprintf
+#    define gzwrite               z_gzwrite
+#  endif
+#  define inflate               z_inflate
+#  define inflateBack           z_inflateBack
+#  define inflateBackEnd        z_inflateBackEnd
+#  define inflateBackInit       z_inflateBackInit
+#  define inflateBackInit_      z_inflateBackInit_
+#  define inflateCodesUsed      z_inflateCodesUsed
+#  define inflateCopy           z_inflateCopy
+#  define inflateEnd            z_inflateEnd
+#  define inflateGetDictionary  z_inflateGetDictionary
+#  define inflateGetHeader      z_inflateGetHeader
+#  define inflateInit           z_inflateInit
+#  define inflateInit2          z_inflateInit2
+#  define inflateInit2_         z_inflateInit2_
+#  define inflateInit_          z_inflateInit_
+#  define inflateMark           z_inflateMark
+#  define inflatePrime          z_inflatePrime
+#  define inflateReset          z_inflateReset
+#  define inflateReset2         z_inflateReset2
+#  define inflateResetKeep      z_inflateResetKeep
+#  define inflateSetDictionary  z_inflateSetDictionary
+#  define inflateSync           z_inflateSync
+#  define inflateSyncPoint      z_inflateSyncPoint
+#  define inflateUndermine      z_inflateUndermine
+#  define inflateValidate       z_inflateValidate
+#  define inflate_copyright     z_inflate_copyright
+#  define inflate_fast          z_inflate_fast
+#  define inflate_table         z_inflate_table
+#  ifndef Z_SOLO
+#    define uncompress            z_uncompress
+#    define uncompress2           z_uncompress2
+#  endif
+#  define zError                z_zError
+#  ifndef Z_SOLO
+#    define zcalloc               z_zcalloc
+#    define zcfree                z_zcfree
+#  endif
+#  define zlibCompileFlags      z_zlibCompileFlags
+#  define zlibVersion           z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+#  define Byte                  z_Byte
+#  define Bytef                 z_Bytef
+#  define alloc_func            z_alloc_func
+#  define charf                 z_charf
+#  define free_func             z_free_func
+#  ifndef Z_SOLO
+#    define gzFile                z_gzFile
+#  endif
+#  define gz_header             z_gz_header
+#  define gz_headerp            z_gz_headerp
+#  define in_func               z_in_func
+#  define intf                  z_intf
+#  define out_func              z_out_func
+#  define uInt                  z_uInt
+#  define uIntf                 z_uIntf
+#  define uLong                 z_uLong
+#  define uLongf                z_uLongf
+#  define voidp                 z_voidp
+#  define voidpc                z_voidpc
+#  define voidpf                z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+#  define gz_header_s           z_gz_header_s
+#  define internal_state        z_internal_state
+
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+#  define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+#  define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+#  define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+#  ifndef WIN32
+#    define WIN32
+#  endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+#    ifndef SYS16BIT
+#      define SYS16BIT
+#    endif
+#  endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+#  define MAXSEG_64K
+#endif
+#ifdef MSDOS
+#  define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+#  ifndef STDC
+#    define STDC
+#  endif
+#  if __STDC_VERSION__ >= 199901L
+#    ifndef STDC99
+#      define STDC99
+#    endif
+#  endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+#  define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
+#  define STDC
+#endif
+
+#ifndef STDC
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const       /* note: need a more gentle solution here */
+#  endif
+#endif
+
+#if defined(ZLIB_CONST) && !defined(z_const)
+#  define z_const const
+#else
+#  define z_const
+#endif
+
+#ifdef Z_SOLO
+   typedef unsigned long z_size_t;
+#else
+#  define z_longlong long long
+#  if defined(NO_SIZE_T)
+     typedef unsigned NO_SIZE_T z_size_t;
+#  elif defined(STDC)
+#    include <stddef.h>
+     typedef size_t z_size_t;
+#  else
+     typedef unsigned long z_size_t;
+#  endif
+#  undef z_longlong
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+#ifndef Z_ARG /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define Z_ARG(args)  args
+#  else
+#    define Z_ARG(args)  ()
+#  endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+#  if defined(M_I86SM) || defined(M_I86MM)
+     /* MSC small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef _MSC_VER
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#  if (defined(__SMALL__) || defined(__MEDIUM__))
+     /* Turbo C small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef __BORLANDC__
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+   /* If building or using zlib as a DLL, define ZLIB_DLL.
+    * This is not mandatory, but it offers a little performance increase.
+    */
+#  ifdef ZLIB_DLL
+#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+#      ifdef ZLIB_INTERNAL
+#        define ZEXTERN extern __declspec(dllexport)
+#      else
+#        define ZEXTERN extern __declspec(dllimport)
+#      endif
+#    endif
+#  endif  /* ZLIB_DLL */
+   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+    * define ZLIB_WINAPI.
+    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+    */
+#  ifdef ZLIB_WINAPI
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+     /* No need for _export, use ZLIB.DEF instead. */
+     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+#    define ZEXPORT WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA WINAPIV
+#    else
+#      define ZEXPORTVA FAR CDECL
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  ifdef ZLIB_DLL
+#    ifdef ZLIB_INTERNAL
+#      define ZEXPORT   __declspec(dllexport)
+#      define ZEXPORTVA __declspec(dllexport)
+#    else
+#      define ZEXPORT   __declspec(dllimport)
+#      define ZEXPORTVA __declspec(dllimport)
+#    endif
+#  endif
+#endif
+
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
+
+#ifndef FAR
+#  define FAR
+#endif
+#ifndef far
+#  define far
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char  Byte;  /* 8 bits */
+#endif
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+#  define Bytef Byte FAR
+#else
+   typedef Byte  FAR Bytef;
+#endif
+typedef char  FAR charf;
+typedef int   FAR intf;
+typedef uInt  FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+   typedef void const *voidpc;
+   typedef void FAR   *voidpf;
+   typedef void       *voidp;
+#else
+   typedef Byte const *voidpc;
+   typedef Byte FAR   *voidpf;
+   typedef Byte       *voidp;
+#endif
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+#  include <limits.h>
+#  if (UINT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned
+#  elif (ULONG_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned long
+#  elif (USHRT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned short
+#  endif
+#endif
+
+#ifdef Z_U4
+   typedef Z_U4 z_crc_t;
+#else
+   typedef unsigned long z_crc_t;
+#endif
+
+#if !defined(_WIN32)
+#  define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+#  ifndef Z_SOLO
+#    include <sys/types.h>      /* for off_t */
+#  endif
+#endif
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifndef Z_SOLO
+#    include <stdarg.h>         /* for va_list */
+#  endif
+#endif
+
+#ifdef _WIN32
+#  ifndef Z_SOLO
+#    include <stddef.h>         /* for wchar_t */
+#  endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+#  define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+#  if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+#    ifdef VMS
+#      include <unixio.h>       /* for off_t */
+#    endif
+#    ifndef z_off_t
+#      define z_off_t off_t
+#    endif
+#  endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+#  define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+#  define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
+#endif
+
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+
+#ifndef z_off_t
+#  define z_off_t long
+#endif
+
+#if !defined(_WIN32) && defined(Z_LARGE64)
+#  define z_off64_t off64_t
+#else
+#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+#    define z_off64_t __int64
+#  else
+#    define z_off64_t z_off_t
+#  endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+  #pragma map(deflateInit_,"DEIN")
+  #pragma map(deflateInit2_,"DEIN2")
+  #pragma map(deflateEnd,"DEEND")
+  #pragma map(deflateBound,"DEBND")
+  #pragma map(inflateInit_,"ININ")
+  #pragma map(inflateInit2_,"ININ2")
+  #pragma map(inflateEnd,"INEND")
+  #pragma map(inflateSync,"INSY")
+  #pragma map(inflateSetDictionary,"INSEDI")
+  #pragma map(compressBound,"CMBND")
+  #pragma map(inflate_table,"INTABL")
+  #pragma map(inflate_fast,"INFA")
+  #pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
diff --git a/sysroots/i686-linux-musl/include/zlib.h b/sysroots/i686-linux-musl/include/zlib.h
new file mode 100644
index 0000000..ad6994f
--- /dev/null
+++ b/sysroots/i686-linux-musl/include/zlib.h
@@ -0,0 +1,2028 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+  version 1.2.12, March 11th, 2022
+
+  Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
+  (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
+*/
+
+#ifndef ZLIB_H
+#define ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.2.12"
+#define ZLIB_VERNUM 0x12c0
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 12
+#define ZLIB_VER_SUBREVISION 0
+
+/*
+ * In Android's NDK we have one zlib.h for all the versions.
+ * zlib users tend to use ZLIB_VERNUM to check API availability,
+ * so we need to translate __ANDROID_API__ appropriately.
+ *
+ * ZLIB_1.2.7.1 and ZLIB_1.2.9 are the only API changes in the NDK's
+ * supported range of API levels.
+ *
+ * jb-mr2-dev (18): 1.2.7 (but not 1.2.7.1, where the APIs were added!)
+ * https://android.googlesource.com/platform/external/zlib/+/refs/heads/jb-mr2-dev/src/zlib.h
+ * kitkat-dev (19): 1.2.8
+ * https://android.googlesource.com/platform/external/zlib/+/refs/heads/kitkat-dev/src/zlib.h
+ *
+ * oreo-mr1-dev (27): 1.2.8
+ * https://android.googlesource.com/platform/external/zlib/+/refs/heads/oreo-mr1-dev/src/zlib.h
+ * pie-dev (28): 1.2.11
+ * https://android.googlesource.com/platform/external/zlib/+/refs/heads/pie-dev/src/zlib.h
+ *
+ * So:
+ *  >= 28 --> 1.2.11
+ *  >= 19 --> 1.2.8
+ *   < 19 --> 1.2.7
+ */
+#if defined(__ANDROID__)
+#  if __ANDROID_API__ >= 28
+     /* Already okay. */
+#  elif __ANDROID_API__ >= 19
+#    undef ZLIB_VERSION
+#    define ZLIB_VERSION "1.2.8"
+#    undef ZLIB_VERNUM
+#    define ZLIB_VERNUM 0x1280
+#    undef ZLIB_VER_REVISION
+#    define ZLIB_VER_REVISION 8
+#  else
+#    undef ZLIB_VERSION
+#    define ZLIB_VERSION "1.2.6"
+#    undef ZLIB_VERNUM
+#    define ZLIB_VERNUM 0x1260
+#    undef ZLIB_VER_REVISION
+#    define ZLIB_VER_REVISION 6
+#  endif
+#endif
+
+/*
+    The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed data.
+  This version of the library supports only one compression method (deflation)
+  but other algorithms will be added later and will have the same stream
+  interface.
+
+    Compression can be done in a single step if the buffers are large enough,
+  or can be done by repeated calls of the compression function.  In the latter
+  case, the application must provide more input and/or consume the output
+  (providing more output space) before each call.
+
+    The compressed data format used by default by the in-memory functions is
+  the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+  around a deflate stream, which is itself documented in RFC 1951.
+
+    The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio using the functions that start
+  with "gz".  The gzip format is different from the zlib format.  gzip is a
+  gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+    This library can optionally read and write gzip and raw deflate streams in
+  memory as well.
+
+    The zlib format was designed to be compact and fast for use in memory
+  and on communications channels.  The gzip format was designed for single-
+  file compression on file systems, has a larger header than zlib to maintain
+  directory information, and uses a different, slower check method than zlib.
+
+    The library does not install any signal handler.  The decoder checks
+  the consistency of the compressed data, so the library should never crash
+  even in the case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+    z_const Bytef *next_in;     /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total number of input bytes read so far */
+
+    Bytef    *next_out; /* next output byte will go here */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total number of bytes output so far */
+
+    z_const char *msg;  /* last error message, NULL if no error */
+    struct internal_state FAR *state; /* not visible by applications */
+
+    alloc_func zalloc;  /* used to allocate the internal state */
+    free_func  zfree;   /* used to free the internal state */
+    voidpf     opaque;  /* private data object passed to zalloc and zfree */
+
+    int     data_type;  /* best guess about the data type: binary or text
+                           for deflate, or the decoding state for inflate */
+    uLong   adler;      /* Adler-32 or CRC-32 value of the uncompressed data */
+    uLong   reserved;   /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+     gzip header information passed to and from zlib routines.  See RFC 1952
+  for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+    int     text;       /* true if compressed data believed to be text */
+    uLong   time;       /* modification time */
+    int     xflags;     /* extra flags (not used when writing a gzip file) */
+    int     os;         /* operating system */
+    Bytef   *extra;     /* pointer to extra field or Z_NULL if none */
+    uInt    extra_len;  /* extra field length (valid if extra != Z_NULL) */
+    uInt    extra_max;  /* space at extra (only when reading header) */
+    Bytef   *name;      /* pointer to zero-terminated file name or Z_NULL */
+    uInt    name_max;   /* space at name (only when reading header) */
+    Bytef   *comment;   /* pointer to zero-terminated comment or Z_NULL */
+    uInt    comm_max;   /* space at comment (only when reading header) */
+    int     hcrc;       /* true if there was or will be a header crc */
+    int     done;       /* true when done reading gzip header (not used
+                           when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
+
+/*
+     The application must update next_in and avail_in when avail_in has dropped
+   to zero.  It must update next_out and avail_out when avail_out has dropped
+   to zero.  The application must initialize zalloc, zfree and opaque before
+   calling the init function.  All other fields are set by the compression
+   library and must not be updated by the application.
+
+     The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree.  This can be useful for custom
+   memory management.  The compression library attaches no meaning to the
+   opaque value.
+
+     zalloc must return Z_NULL if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, zalloc and zfree must be
+   thread safe.  In that case, zlib is thread-safe.  When zalloc and zfree are
+   Z_NULL on entry to the initialization function, they are set to internal
+   routines that use the standard library functions malloc() and free().
+
+     On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this if
+   the symbol MAXSEG_64K is defined (see zconf.h).  WARNING: On MSDOS, pointers
+   returned by zalloc for objects of exactly 65536 bytes *must* have their
+   offset normalized to zero.  The default allocation function provided by this
+   library ensures this (see zutil.c).  To reduce memory requirements and avoid
+   any allocation of 64K objects, at the expense of compression ratio, compile
+   the library with -DMAX_WBITS=14 (see zconf.h).
+
+     The fields total_in and total_out can be used for statistics or progress
+   reports.  After compression, total_in holds the total size of the
+   uncompressed data and may be saved for use by the decompressor (particularly
+   if the decompressor wants to decompress everything in a single step).
+*/
+
+                        /* constants */
+
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1
+#define Z_SYNC_FLUSH    2
+#define Z_FULL_FLUSH    3
+#define Z_FINISH        4
+#define Z_BLOCK         5
+#define Z_TREES         6
+/* Allowed flush values; see deflate() and inflate() below for details */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_NEED_DICT     2
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION         0
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_RLE                 3
+#define Z_FIXED               4
+#define Z_DEFAULT_STRATEGY    0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY   0
+#define Z_TEXT     1
+#define Z_ASCII    Z_TEXT   /* for compatibility with 1.2.2 and earlier */
+#define Z_UNKNOWN  2
+/* Possible values of the data_type field for deflate() */
+
+#define Z_DEFLATED   8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+
+                        /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is not
+   compatible with the zlib.h header file used by the application.  This check
+   is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+     Initializes the internal stream state for compression.  The fields
+   zalloc, zfree and opaque must be initialized before by the caller.  If
+   zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+   allocation functions.
+
+     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+   1 gives best speed, 9 gives best compression, 0 gives no compression at all
+   (the input data is simply copied a block at a time).  Z_DEFAULT_COMPRESSION
+   requests a default compromise between speed and compression (currently
+   equivalent to level 6).
+
+     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if level is not a valid compression level, or
+   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+   with the version assumed by the caller (ZLIB_VERSION).  msg is set to null
+   if there is no error message.  deflateInit does not perform any compression:
+   this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+    deflate compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
+
+    The detailed semantics are as follows.  deflate performs one or both of the
+  following actions:
+
+  - Compress more input starting at next_in and update next_in and avail_in
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), next_in and avail_in are updated and
+    processing will resume at this point for the next call of deflate().
+
+  - Generate more output starting at next_out and update next_out and avail_out
+    accordingly.  This action is forced if the parameter flush is non zero.
+    Forcing flush frequently degrades the compression ratio, so this parameter
+    should be set only when necessary.  Some output may be provided even if
+    flush is zero.
+
+    Before the call of deflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating avail_in or avail_out accordingly; avail_out should
+  never be zero before the call.  The application can consume the compressed
+  output when it wants, for example when the output buffer is full (avail_out
+  == 0), or after each call of deflate().  If deflate returns Z_OK and with
+  zero avail_out, it must be called again after making room in the output
+  buffer because there might be more output pending. See deflatePending(),
+  which can be used if desired to determine whether or not there is more ouput
+  in that case.
+
+    Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+  decide how much data to accumulate before producing output, in order to
+  maximize compression.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far.  (In
+  particular avail_in is zero after the call if enough output space has been
+  provided before the call.) Flushing may degrade compression for some
+  compression algorithms and so it should be used only when necessary.  This
+  completes the current deflate block and follows it with an empty stored block
+  that is three bits plus filler bits to the next byte, followed by four bytes
+  (00 00 ff ff).
+
+    If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+  output buffer, but the output is not aligned to a byte boundary.  All of the
+  input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+  This completes the current deflate block and follows it with an empty fixed
+  codes block that is 10 bits long.  This assures that enough bytes are output
+  in order for the decompressor to finish the block before the empty fixed
+  codes block.
+
+    If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+  for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+  seven bits of the current block are held to be written as the next byte after
+  the next deflate block is completed.  In this case, the decompressor may not
+  be provided enough bits at this point in order to complete decompression of
+  the data provided so far to the compressor.  It may need to wait for the next
+  block to be emitted.  This is for advanced applications that need to control
+  the emission of deflate blocks.
+
+    If flush is set to Z_FULL_FLUSH, all output is flushed as with
+  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired.  Using Z_FULL_FLUSH too often can seriously degrade
+  compression.
+
+    If deflate returns with avail_out == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  avail_out), until the flush is complete (deflate returns with non-zero
+  avail_out).  In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+  avail_out is greater than six to avoid repeated flush markers due to
+  avail_out == 0 on return.
+
+    If the parameter flush is set to Z_FINISH, pending input is processed,
+  pending output is flushed and deflate returns with Z_STREAM_END if there was
+  enough output space.  If deflate returns with Z_OK or Z_BUF_ERROR, this
+  function must be called again with Z_FINISH and more output space (updated
+  avail_out) but no more input data, until it returns with Z_STREAM_END or an
+  error.  After deflate has returned Z_STREAM_END, the only possible operations
+  on the stream are deflateReset or deflateEnd.
+
+    Z_FINISH can be used in the first deflate call after deflateInit if all the
+  compression is to be done in a single step.  In order to complete in one
+  call, avail_out must be at least the value returned by deflateBound (see
+  below).  Then deflate is guaranteed to return Z_STREAM_END.  If not enough
+  output space is provided, deflate will not return Z_STREAM_END, and it must
+  be called again as described above.
+
+    deflate() sets strm->adler to the Adler-32 checksum of all input read
+  so far (that is, total_in bytes).  If a gzip stream is being generated, then
+  strm->adler will be the CRC-32 checksum of the input read so far.  (See
+  deflateInit2 below.)
+
+    deflate() may update strm->data_type if it can make a good guess about
+  the input data type (Z_BINARY or Z_TEXT).  If in doubt, the data is
+  considered binary.  This field is only for information purposes and does not
+  affect the compression algorithm in any manner.
+
+    deflate() returns Z_OK if some progress has been made (more input
+  processed or more output produced), Z_STREAM_END if all input has been
+  consumed and all output has been produced (only when flush is set to
+  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+  if next_in or next_out was Z_NULL or the state was inadvertently written over
+  by the application), or Z_BUF_ERROR if no progress is possible (for example
+  avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not fatal, and
+  deflate() can be called again with more input and more output space to
+  continue compressing.
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any pending
+   output.
+
+     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+   prematurely (some input or output was discarded).  In the error case, msg
+   may be set but then points to a static string (which must not be
+   deallocated).
+*/
+
+
+/*
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+     Initializes the internal stream state for decompression.  The fields
+   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+   the caller.  In the current version of inflate, the provided input is not
+   read or consumed.  The allocation of a sliding window will be deferred to
+   the first call of inflate (if the decompression does not complete on the
+   first call).  If zalloc and zfree are set to Z_NULL, inflateInit updates
+   them to use default allocation functions.
+
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit does not perform any decompression.
+   Actual decompression will be done by inflate().  So next_in, and avail_in,
+   next_out, and avail_out are unused and unchanged.  The current
+   implementation of inflateInit() does not process any header information --
+   that is deferred until inflate() is called.
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+    inflate decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
+
+  The detailed semantics are as follows.  inflate performs one or both of the
+  following actions:
+
+  - Decompress more input starting at next_in and update next_in and avail_in
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), then next_in and avail_in are updated
+    accordingly, and processing will resume at this point for the next call of
+    inflate().
+
+  - Generate more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() provides as much output as possible, until there is
+    no more input data or no more space in the output buffer (see below about
+    the flush parameter).
+
+    Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating the next_* and avail_* values accordingly.  If the
+  caller of inflate() does not provide both available input and available
+  output space, it is possible that there will be no progress made.  The
+  application can consume the uncompressed output when it wants, for example
+  when the output buffer is full (avail_out == 0), or after each call of
+  inflate().  If inflate returns Z_OK and with zero avail_out, it must be
+  called again after making room in the output buffer because there might be
+  more output pending.
+
+    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+  Z_BLOCK, or Z_TREES.  Z_SYNC_FLUSH requests that inflate() flush as much
+  output as possible to the output buffer.  Z_BLOCK requests that inflate()
+  stop if and when it gets to the next deflate block boundary.  When decoding
+  the zlib or gzip format, this will cause inflate() to return immediately
+  after the header and before the first block.  When doing a raw inflate,
+  inflate() will go ahead and process the first block, and will return when it
+  gets to the end of that block, or when it runs out of data.
+
+    The Z_BLOCK option assists in appending to or combining deflate streams.
+  To assist in this, on return inflate() always sets strm->data_type to the
+  number of unused bits in the last byte taken from strm->next_in, plus 64 if
+  inflate() is currently decoding the last block in the deflate stream, plus
+  128 if inflate() returned immediately after decoding an end-of-block code or
+  decoding the complete header up to just before the first byte of the deflate
+  stream.  The end-of-block will not be indicated until all of the uncompressed
+  data from that block has been written to strm->next_out.  The number of
+  unused bits may in general be greater than seven, except when bit 7 of
+  data_type is set, in which case the number of unused bits will be less than
+  eight.  data_type is set as noted here every time inflate() returns for all
+  flush options, and so can be used to determine the amount of currently
+  consumed input in bits.
+
+    The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+  end of each deflate block header is reached, before any actual data in that
+  block is decoded.  This allows the caller to determine the length of the
+  deflate block header for later use in random access within a deflate block.
+  256 is added to the value of strm->data_type when inflate() returns
+  immediately after reaching the end of the deflate block header.
+
+    inflate() should normally be called until it returns Z_STREAM_END or an
+  error.  However if all decompression is to be performed in a single step (a
+  single call of inflate), the parameter flush should be set to Z_FINISH.  In
+  this case all pending input is processed and all pending output is flushed;
+  avail_out must be large enough to hold all of the uncompressed data for the
+  operation to complete.  (The size of the uncompressed data may have been
+  saved by the compressor for this purpose.)  The use of Z_FINISH is not
+  required to perform an inflation in one step.  However it may be used to
+  inform inflate that a faster approach can be used for the single inflate()
+  call.  Z_FINISH also informs inflate to not maintain a sliding window if the
+  stream completes, which reduces inflate's memory footprint.  If the stream
+  does not complete, either because not all of the stream is provided or not
+  enough output space is provided, then a sliding window will be allocated and
+  inflate() can be called again to continue the operation as if Z_NO_FLUSH had
+  been used.
+
+     In this implementation, inflate() always flushes as much output as
+  possible to the output buffer, and always uses the faster approach on the
+  first call.  So the effects of the flush parameter in this implementation are
+  on the return value of inflate() as noted below, when inflate() returns early
+  when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
+  memory for a sliding window when Z_FINISH is used.
+
+     If a preset dictionary is needed after this call (see inflateSetDictionary
+  below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
+  chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+  strm->adler to the Adler-32 checksum of all output produced so far (that is,
+  total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+  below.  At the end of the stream, inflate() checks that its computed Adler-32
+  checksum is equal to that saved by the compressor and returns Z_STREAM_END
+  only if the checksum is correct.
+
+    inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+  deflate data.  The header type is detected automatically, if requested when
+  initializing with inflateInit2().  Any information contained in the gzip
+  header is not retained unless inflateGetHeader() is used.  When processing
+  gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
+  produced so far.  The CRC-32 is checked against the gzip trailer, as is the
+  uncompressed length, modulo 2^32.
+
+    inflate() returns Z_OK if some progress has been made (more input processed
+  or more output produced), Z_STREAM_END if the end of the compressed data has
+  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect check
+  value, in which case strm->msg points to a string with a more specific
+  error), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+  next_in or next_out was Z_NULL, or the state was inadvertently written over
+  by the application), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR
+  if no progress was possible or if there was not enough room in the output
+  buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
+  inflate() can be called again with more input and more output space to
+  continue decompressing.  If Z_DATA_ERROR is returned, the application may
+  then call inflateSync() to look for a good compression block if a partial
+  recovery of the data is to be attempted.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any pending
+   output.
+
+     inflateEnd returns Z_OK if success, or Z_STREAM_ERROR if the stream state
+   was inconsistent.
+*/
+
+
+                        /* Advanced functions */
+
+/*
+    The following functions are needed only in some special applications.
+*/
+
+/*
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+                                     int  level,
+                                     int  method,
+                                     int  windowBits,
+                                     int  memLevel,
+                                     int  strategy));
+
+     This is another version of deflateInit with more compression options.  The
+   fields zalloc, zfree and opaque must be initialized before by the caller.
+
+     The method parameter is the compression method.  It must be Z_DEFLATED in
+   this version of the library.
+
+     The windowBits parameter is the base two logarithm of the window size
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library.  Larger values of this parameter result in better
+   compression at the expense of memory usage.  The default value is 15 if
+   deflateInit is used instead.
+
+     For the current implementation of deflate(), a windowBits value of 8 (a
+   window size of 256 bytes) is not supported.  As a result, a request for 8
+   will result in 9 (a 512-byte window).  In that case, providing 8 to
+   inflateInit2() will result in an error when the zlib header with 9 is
+   checked against the initialization of inflate().  The remedy is to not use 8
+   with deflateInit2() with this initialization, or at least in that case use 9
+   with inflateInit2().
+
+     windowBits can also be -8..-15 for raw deflate.  In this case, -windowBits
+   determines the window size.  deflate() will then generate raw deflate data
+   with no zlib header or trailer, and will not compute a check value.
+
+     windowBits can also be greater than 15 for optional gzip encoding.  Add
+   16 to windowBits to write a simple gzip header and trailer around the
+   compressed data instead of a zlib wrapper.  The gzip header will have no
+   file name, no extra data, no comment, no modification time (set to zero), no
+   header crc, and the operating system will be set to the appropriate value,
+   if the operating system was determined at compile time.  If a gzip stream is
+   being written, strm->adler is a CRC-32 instead of an Adler-32.
+
+     For raw deflate or gzip encoding, a request for a 256-byte window is
+   rejected as invalid, since only the zlib header provides a means of
+   transmitting the window size to the decompressor.
+
+     The memLevel parameter specifies how much memory should be allocated
+   for the internal compression state.  memLevel=1 uses minimum memory but is
+   slow and reduces compression ratio; memLevel=9 uses maximum memory for
+   optimal speed.  The default value is 8.  See zconf.h for total memory usage
+   as a function of windowBits and memLevel.
+
+     The strategy parameter is used to tune the compression algorithm.  Use the
+   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+   filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+   string match), or Z_RLE to limit match distances to one (run-length
+   encoding).  Filtered data consists mostly of small values with a somewhat
+   random distribution.  In this case, the compression algorithm is tuned to
+   compress them better.  The effect of Z_FILTERED is to force more Huffman
+   coding and less string matching; it is somewhat intermediate between
+   Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY.  Z_RLE is designed to be almost as
+   fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data.  The
+   strategy parameter only affects the compression ratio but not the
+   correctness of the compressed output even if it is not set appropriately.
+   Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+   decoder for special applications.
+
+     deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+   method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+   incompatible with the version assumed by the caller (ZLIB_VERSION).  msg is
+   set to null if there is no error message.  deflateInit2 does not perform any
+   compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output.  When using the zlib format, this
+   function must be called immediately after deflateInit, deflateInit2 or
+   deflateReset, and before any call of deflate.  When doing raw deflate, this
+   function must be called either before any call of deflate, or immediately
+   after the completion of a deflate block, i.e. after all input has been
+   consumed and all output has been delivered when using any of the flush
+   options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH.  The
+   compressor and decompressor must use exactly the same dictionary (see
+   inflateSetDictionary).
+
+     The dictionary should consist of strings (byte sequences) that are likely
+   to be encountered later in the data to be compressed, with the most commonly
+   used strings preferably put towards the end of the dictionary.  Using a
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy; the data can then be compressed better than
+   with the default empty dictionary.
+
+     Depending on the size of the compression data structures selected by
+   deflateInit or deflateInit2, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size
+   provided in deflateInit or deflateInit2.  Thus the strings most likely to be
+   useful should be put at the end of the dictionary, not at the front.  In
+   addition, the current implementation of deflate will use at most the window
+   size minus 262 bytes of the provided dictionary.
+
+     Upon return of this function, strm->adler is set to the Adler-32 value
+   of the dictionary; the decompressor may later use this value to determine
+   which dictionary has been used by the compressor.  (The Adler-32 value
+   applies to the whole dictionary even if only a subset of the dictionary is
+   actually used by the compressor.) If a raw deflate was requested, then the
+   Adler-32 value is not computed and strm->adler is not set.
+
+     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
+   inconsistent (for example if deflate has already been called for this stream
+   or if not at a block boundary for raw deflate).  deflateSetDictionary does
+   not perform any compression: this will be done by deflate().
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN int ZEXPORT deflateGetDictionary OF((z_streamp strm,
+                                             Bytef *dictionary,
+                                             uInt  *dictLength));
+#endif
+/*
+     Returns the sliding dictionary being maintained by deflate.  dictLength is
+   set to the number of bytes in the dictionary, and that many bytes are copied
+   to dictionary.  dictionary must have enough space, where 32768 bytes is
+   always enough.  If deflateGetDictionary() is called with dictionary equal to
+   Z_NULL, then only the dictionary length is returned, and nothing is copied.
+   Similary, if dictLength is Z_NULL, then it is not set.
+
+     deflateGetDictionary() may return a length less than the window size, even
+   when more than the window size in input has been provided. It may return up
+   to 258 bytes less in that case, due to how zlib's implementation of deflate
+   manages the sliding window and lookahead for matches, where matches can be
+   up to 258 bytes long. If the application needs the last window-size bytes of
+   input, then that would need to be saved by the application outside of zlib.
+
+     deflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+   stream state is inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when several compression strategies will be
+   tried, for example when there are several ways of pre-processing the input
+   data with a filter.  The streams that will be discarded should then be freed
+   by calling deflateEnd.  Note that deflateCopy duplicates the internal
+   compression state which can be quite large, so this strategy is slow and can
+   consume lots of memory.
+
+     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to deflateEnd followed by deflateInit, but
+   does not free and reallocate the internal compression state.  The stream
+   will leave the compression level and any other attributes that may have been
+   set unchanged.
+
+     deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+                                      int level,
+                                      int strategy));
+/*
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in deflateInit2().  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different strategy.
+   If the compression approach (which is a function of the level) or the
+   strategy is changed, and if there have been any deflate() calls since the
+   state was initialized or reset, then the input available so far is
+   compressed with the old level and strategy using deflate(strm, Z_BLOCK).
+   There are three approaches for the compression levels 0, 1..3, and 4..9
+   respectively.  The new level and strategy will take effect at the next call
+   of deflate().
+
+     If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
+   not have enough output space to complete, then the parameter change will not
+   take effect.  In this case, deflateParams() can be called again with the
+   same parameters and more output space to try again.
+
+     In order to assure a change in the parameters on the first try, the
+   deflate stream should be flushed using deflate() with Z_BLOCK or other flush
+   request until strm.avail_out is not zero, before calling deflateParams().
+   Then no more input data should be provided before the deflateParams() call.
+   If this is done, the old level and strategy will be applied to the data
+   compressed before deflateParams(), and the new level and strategy will be
+   applied to the the data compressed after deflateParams().
+
+     deflateParams returns Z_OK on success, Z_STREAM_ERROR if the source stream
+   state was inconsistent or if a parameter was invalid, or Z_BUF_ERROR if
+   there was not enough output space to complete the compression of the
+   available input data before a change in the strategy or approach.  Note that
+   in the case of a Z_BUF_ERROR, the parameters are not changed.  A return
+   value of Z_BUF_ERROR is not fatal, in which case deflateParams() can be
+   retried with more output space.
+*/
+
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+                                    int good_length,
+                                    int max_lazy,
+                                    int nice_length,
+                                    int max_chain));
+/*
+     Fine tune deflate's internal compression parameters.  This should only be
+   used by someone who understands the algorithm used by zlib's deflate for
+   searching for the best matching string, and even then only by the most
+   fanatic optimizer trying to squeeze out the last compressed bit for their
+   specific input data.  Read the deflate.c source code for the meaning of the
+   max_lazy, good_length, nice_length, and max_chain parameters.
+
+     deflateTune() can be called after deflateInit() or deflateInit2(), and
+   returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+                                       uLong sourceLen));
+/*
+     deflateBound() returns an upper bound on the compressed size after
+   deflation of sourceLen bytes.  It must be called after deflateInit() or
+   deflateInit2(), and after deflateSetHeader(), if used.  This would be used
+   to allocate an output buffer for deflation in a single pass, and so would be
+   called before deflate().  If that first deflate() call is provided the
+   sourceLen input bytes, an output buffer allocated to the size returned by
+   deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
+   to return Z_STREAM_END.  Note that it is possible for the compressed size to
+   be larger than the value returned by deflateBound() if flush options other
+   than Z_FINISH or Z_NO_FLUSH are used.
+*/
+
+ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
+                                       unsigned *pending,
+                                       int *bits));
+/*
+     deflatePending() returns the number of bytes and bits of output that have
+   been generated, but not yet provided in the available output.  The bytes not
+   provided would be due to the available output space having being consumed.
+   The number of bits of output not provided are between 0 and 7, where they
+   await more bits to join them in order to fill out a full byte.  If pending
+   or bits are Z_NULL, then those values are not set.
+
+     deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+ */
+
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     deflatePrime() inserts bits in the deflate output stream.  The intent
+   is that this function is used to start off the deflate output with the bits
+   leftover from a previous deflate stream when appending to it.  As such, this
+   function can only be used for raw deflate, and must be used before the first
+   deflate() call after a deflateInit2() or deflateReset().  bits must be less
+   than or equal to 16, and that many of the least significant bits of value
+   will be inserted in the output.
+
+     deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
+   room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
+   source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     deflateSetHeader() provides gzip header information for when a gzip
+   stream is requested by deflateInit2().  deflateSetHeader() may be called
+   after deflateInit2() or deflateReset() and before the first call of
+   deflate().  The text, time, os, extra field, name, and comment information
+   in the provided gz_header structure are written to the gzip header (xflag is
+   ignored -- the extra flags are set according to the compression level).  The
+   caller must assure that, if not Z_NULL, name and comment are terminated with
+   a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+   available there.  If hcrc is true, a gzip header crc is included.  Note that
+   the current versions of the command-line version of gzip (up through version
+   1.3.x) do not support header crc's, and will report that it is a "multi-part
+   gzip file" and give up.
+
+     If deflateSetHeader is not used, the default gzip header has text false,
+   the time set to zero, and os set to 255, with no extra, name, or comment
+   fields.  The gzip header is returned to the default state by deflateReset().
+
+     deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+                                     int  windowBits));
+
+     This is another version of inflateInit with an extra parameter.  The
+   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+   before by the caller.
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library.  The default value is 15 if inflateInit is used
+   instead.  windowBits must be greater than or equal to the windowBits value
+   provided to deflateInit2() while compressing, or it must be equal to 15 if
+   deflateInit2() was not used.  If a compressed stream with a larger window
+   size is given as input, inflate() will return with the error code
+   Z_DATA_ERROR instead of trying to allocate a larger window.
+
+     windowBits can also be zero to request that inflate use the window size in
+   the zlib header of the compressed stream.
+
+     windowBits can also be -8..-15 for raw inflate.  In this case, -windowBits
+   determines the window size.  inflate() will then process raw deflate data,
+   not looking for a zlib or gzip header, not generating a check value, and not
+   looking for any check values for comparison at the end of the stream.  This
+   is for use with other formats that use the deflate compressed data format
+   such as zip.  Those formats provide their own check values.  If a custom
+   format is developed using the raw deflate format for compressed data, it is
+   recommended that a check value such as an Adler-32 or a CRC-32 be applied to
+   the uncompressed data as is done in the zlib, gzip, and zip formats.  For
+   most applications, the zlib format should be used as is.  Note that comments
+   above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+     windowBits can also be greater than 15 for optional gzip decoding.  Add
+   32 to windowBits to enable zlib and gzip decoding with automatic header
+   detection, or add 16 to decode only the gzip format (the zlib format will
+   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is a
+   CRC-32 instead of an Adler-32.  Unlike the gunzip utility and gzread() (see
+   below), inflate() will *not* automatically decode concatenated gzip members.
+   inflate() will return Z_STREAM_END at the end of the gzip member.  The state
+   would need to be reset to continue decoding a subsequent gzip member.  This
+   *must* be done if there is more data after a gzip member, in order for the
+   decompression to be compliant with the gzip standard (RFC 1952).
+
+     inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit2 does not perform any decompression
+   apart from possibly reading the zlib header if present: actual decompression
+   will be done by inflate().  (So next_in and avail_in may be modified, but
+   next_out and avail_out are unused and unchanged.) The current implementation
+   of inflateInit2() does not process any header information -- that is
+   deferred until inflate() is called.
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence.  This function must be called immediately after a call of inflate,
+   if that call returned Z_NEED_DICT.  The dictionary chosen by the compressor
+   can be determined from the Adler-32 value returned by that call of inflate.
+   The compressor and decompressor must use exactly the same dictionary (see
+   deflateSetDictionary).  For raw inflate, this function can be called at any
+   time to set the dictionary.  If the provided dictionary is smaller than the
+   window and there is already data in the window, then the provided dictionary
+   will amend what's there.  The application must insure that the dictionary
+   that was used for compression is provided.
+
+     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
+   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+   expected one (incorrect Adler-32 value).  inflateSetDictionary does not
+   perform any decompression: this will be done by subsequent calls of
+   inflate().
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 19
+ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
+                                             Bytef *dictionary,
+                                             uInt  *dictLength));
+#endif
+/*
+     Returns the sliding dictionary being maintained by inflate.  dictLength is
+   set to the number of bytes in the dictionary, and that many bytes are copied
+   to dictionary.  dictionary must have enough space, where 32768 bytes is
+   always enough.  If inflateGetDictionary() is called with dictionary equal to
+   Z_NULL, then only the dictionary length is returned, and nothing is copied.
+   Similary, if dictLength is Z_NULL, then it is not set.
+
+     inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+   stream state is inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/*
+     Skips invalid compressed data until a possible full flush point (see above
+   for the description of deflate with Z_FULL_FLUSH) can be found, or until all
+   available input is skipped.  No output is provided.
+
+     inflateSync searches for a 00 00 FF FF pattern in the compressed data.
+   All full flush points have this pattern, but not all occurrences of this
+   pattern are full flush points.
+
+     inflateSync returns Z_OK if a possible full flush point has been found,
+   Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
+   has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
+   In the success case, the application may save the current current value of
+   total_in which indicates where valid compressed data was found.  In the
+   error case, the application may repeatedly call inflateSync, providing more
+   input each time, until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when randomly accessing a large stream.  The
+   first pass through the stream can periodically record the inflate state,
+   allowing restarting inflate at those points when randomly accessing the
+   stream.
+
+     inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to inflateEnd followed by inflateInit,
+   but does not free and reallocate the internal decompression state.  The
+   stream will keep attributes that may have been set by inflateInit2.
+
+     inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+                                      int windowBits));
+/*
+     This function is the same as inflateReset, but it also permits changing
+   the wrap and window size requests.  The windowBits parameter is interpreted
+   the same as it is for inflateInit2.  If the window size is changed, then the
+   memory allocated for the window is freed, and the window will be reallocated
+   by inflate() if needed.
+
+     inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+   the windowBits parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     This function inserts bits in the inflate input stream.  The intent is
+   that this function is used to start inflating at a bit position in the
+   middle of a byte.  The provided bits will be used before any bytes are used
+   from next_in.  This function should only be used with raw inflate, and
+   should be used before the first inflate() call after inflateInit2() or
+   inflateReset().  bits must be less than or equal to 16, and that many of the
+   least significant bits of value will be inserted in the input.
+
+     If bits is negative, then the input stream bit buffer is emptied.  Then
+   inflatePrime() can be called again to put bits in the buffer.  This is used
+   to clear out bits leftover after feeding inflate a block description prior
+   to feeding inflate codes.
+
+     inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+     This function returns two values, one in the lower 16 bits of the return
+   value, and the other in the remaining upper bits, obtained by shifting the
+   return value down 16 bits.  If the upper value is -1 and the lower value is
+   zero, then inflate() is currently decoding information outside of a block.
+   If the upper value is -1 and the lower value is non-zero, then inflate is in
+   the middle of a stored block, with the lower value equaling the number of
+   bytes from the input remaining to copy.  If the upper value is not -1, then
+   it is the number of bits back from the current bit position in the input of
+   the code (literal or length/distance pair) currently being processed.  In
+   that case the lower value is the number of bytes already emitted for that
+   code.
+
+     A code is being processed if inflate is waiting for more input to complete
+   decoding of the code, or if it has completed decoding but is waiting for
+   more output space to write the literal or match data.
+
+     inflateMark() is used to mark locations in the input data for random
+   access, which may be at bit positions, and to note those cases where the
+   output of a code may span boundaries of random access blocks.  The current
+   location in the input stream can be determined from avail_in and data_type
+   as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+     inflateMark returns the value noted above, or -65536 if the provided
+   source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     inflateGetHeader() requests that gzip header information be stored in the
+   provided gz_header structure.  inflateGetHeader() may be called after
+   inflateInit2() or inflateReset(), and before the first call of inflate().
+   As inflate() processes the gzip stream, head->done is zero until the header
+   is completed, at which time head->done is set to one.  If a zlib stream is
+   being decoded, then head->done is set to -1 to indicate that there will be
+   no gzip header information forthcoming.  Note that Z_BLOCK or Z_TREES can be
+   used to force inflate() to return immediately after header processing is
+   complete and before any actual data is decompressed.
+
+     The text, time, xflags, and os fields are filled in with the gzip header
+   contents.  hcrc is set to true if there is a header CRC.  (The header CRC
+   was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+   contains the maximum number of bytes to write to extra.  Once done is true,
+   extra_len contains the actual extra field length, and extra contains the
+   extra field, or that field truncated if extra_max is less than extra_len.
+   If name is not Z_NULL, then up to name_max characters are written there,
+   terminated with a zero unless the length is greater than name_max.  If
+   comment is not Z_NULL, then up to comm_max characters are written there,
+   terminated with a zero unless the length is greater than comm_max.  When any
+   of extra, name, or comment are not Z_NULL and the respective field is not
+   present in the header, then that field is set to Z_NULL to signal its
+   absence.  This allows the use of deflateSetHeader() with the returned
+   structure to duplicate the header.  However if those fields are set to
+   allocated memory, then the application will need to save those pointers
+   elsewhere so that they can be eventually freed.
+
+     If inflateGetHeader is not used, then the header information is simply
+   discarded.  The header is always checked for validity, including the header
+   CRC if present.  inflateReset() will reset the process to discard the header
+   information.  The application would need to call inflateGetHeader() again to
+   retrieve the header from the next gzip stream.
+
+     inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+                                        unsigned char FAR *window));
+
+     Initialize the internal stream state for decompression using inflateBack()
+   calls.  The fields zalloc, zfree and opaque in strm must be initialized
+   before the call.  If zalloc and zfree are Z_NULL, then the default library-
+   derived memory allocation routines are used.  windowBits is the base two
+   logarithm of the window size, in the range 8..15.  window is a caller
+   supplied buffer of that size.  Except for special applications where it is
+   assured that deflate was used with small window sizes, windowBits must be 15
+   and a 32K byte window must be supplied to be able to decompress general
+   deflate streams.
+
+     See inflateBack() for the usage of these routines.
+
+     inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+   the parameters are invalid, Z_MEM_ERROR if the internal state could not be
+   allocated, or Z_VERSION_ERROR if the version of the library does not match
+   the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *,
+                                z_const unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+                                    in_func in, void FAR *in_desc,
+                                    out_func out, void FAR *out_desc));
+/*
+     inflateBack() does a raw inflate with a single call using a call-back
+   interface for input and output.  This is potentially more efficient than
+   inflate() for file i/o applications, in that it avoids copying between the
+   output and the sliding window by simply making the window itself the output
+   buffer.  inflate() can be faster on modern CPUs when used with large
+   buffers.  inflateBack() trusts the application to not change the output
+   buffer passed by the output function, at least until inflateBack() returns.
+
+     inflateBackInit() must be called first to allocate the internal state
+   and to initialize the state with the user-provided window buffer.
+   inflateBack() may then be used multiple times to inflate a complete, raw
+   deflate stream with each call.  inflateBackEnd() is then called to free the
+   allocated state.
+
+     A raw deflate stream is one with no zlib or gzip header or trailer.
+   This routine would normally be used in a utility that reads zip or gzip
+   files and writes out uncompressed files.  The utility would decode the
+   header and process the trailer on its own, hence this routine expects only
+   the raw deflate stream to decompress.  This is different from the default
+   behavior of inflate(), which expects a zlib header and trailer around the
+   deflate stream.
+
+     inflateBack() uses two subroutines supplied by the caller that are then
+   called by inflateBack() for input and output.  inflateBack() calls those
+   routines until it reads a complete deflate stream and writes out all of the
+   uncompressed data, or until it encounters an error.  The function's
+   parameters and return types are defined above in the in_func and out_func
+   typedefs.  inflateBack() will call in(in_desc, &buf) which should return the
+   number of bytes of provided input, and a pointer to that input in buf.  If
+   there is no input available, in() must return zero -- buf is ignored in that
+   case -- and inflateBack() will return a buffer error.  inflateBack() will
+   call out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].
+   out() should return zero on success, or non-zero on failure.  If out()
+   returns non-zero, inflateBack() will return with an error.  Neither in() nor
+   out() are permitted to change the contents of the window provided to
+   inflateBackInit(), which is also the buffer that out() uses to write from.
+   The length written by out() will be at most the window size.  Any non-zero
+   amount of input may be provided by in().
+
+     For convenience, inflateBack() can be provided input on the first call by
+   setting strm->next_in and strm->avail_in.  If that input is exhausted, then
+   in() will be called.  Therefore strm->next_in must be initialized before
+   calling inflateBack().  If strm->next_in is Z_NULL, then in() will be called
+   immediately for input.  If strm->next_in is not Z_NULL, then strm->avail_in
+   must also be initialized, and then if strm->avail_in is not zero, input will
+   initially be taken from strm->next_in[0 ..  strm->avail_in - 1].
+
+     The in_desc and out_desc parameters of inflateBack() is passed as the
+   first parameter of in() and out() respectively when they are called.  These
+   descriptors can be optionally used to pass any information that the caller-
+   supplied in() and out() functions need to do their job.
+
+     On return, inflateBack() will set strm->next_in and strm->avail_in to
+   pass back any unused input that was provided by the last in() call.  The
+   return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+   if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+   in the deflate stream (in which case strm->msg is set to indicate the nature
+   of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+   In the case of Z_BUF_ERROR, an input or output error can be distinguished
+   using strm->next_in which will be Z_NULL only if in() returned an error.  If
+   strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+   non-zero.  (in() will always be called before out(), so strm->next_in is
+   assured to be defined if out() returns non-zero.)  Note that inflateBack()
+   cannot return Z_OK.
+*/
+
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+     All memory allocated by inflateBackInit() is freed.
+
+     inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+   state was inconsistent.
+*/
+
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+    Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+     1.0: size of uInt
+     3.2: size of uLong
+     5.4: size of voidpf (pointer)
+     7.6: size of z_off_t
+
+    Compiler, assembler, and debug options:
+     8: ZLIB_DEBUG
+     9: ASMV or ASMINF -- use ASM code
+     10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+     11: 0 (reserved)
+
+    One-time table building (smaller code, but not thread-safe if true):
+     12: BUILDFIXED -- build static block decoding tables when needed
+     13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+     14,15: 0 (reserved)
+
+    Library content (indicates missing functionality):
+     16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+                          deflate code when not needed)
+     17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+                    and decode gzip streams (to avoid linking crc code)
+     18-19: 0 (reserved)
+
+    Operation variations (changes in library functionality):
+     20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+     21: FASTEST -- deflate algorithm with only one, lowest compression level
+     22,23: 0 (reserved)
+
+    The sprintf variant used by gzprintf (zero is best):
+     24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+     25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+     26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+    Remainder:
+     27-31: 0 (reserved)
+ */
+
+#ifndef Z_SOLO
+
+                        /* utility functions */
+
+/*
+     The following utility functions are implemented on top of the basic
+   stream-oriented functions.  To simplify the interface, some default options
+   are assumed (compression level and memory usage, standard memory allocation
+   functions).  The source code of these utility functions can be modified if
+   you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
+                                 const Bytef *source, uLong sourceLen));
+/*
+     Compresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed data.  compress() is equivalent to compress2() with a level
+   parameter of Z_DEFAULT_COMPRESSION.
+
+     compress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
+                                  const Bytef *source, uLong sourceLen,
+                                  int level));
+/*
+     Compresses the source buffer into the destination buffer.  The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer.  Upon entry, destLen is the total size of the
+   destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed data.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+/*
+     compressBound() returns an upper bound on the compressed size after
+   compress() or compress2() on sourceLen bytes.  It would be used before a
+   compress() or compress2() call to allocate the destination buffer.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+                                   const Bytef *source, uLong sourceLen));
+/*
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be large enough to hold the entire
+   uncompressed data.  (The size of the uncompressed data must have been saved
+   previously by the compressor and transmitted to the decompressor by some
+   mechanism outside the scope of this compression library.) Upon exit, destLen
+   is the actual size of the uncompressed data.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.  In
+   the case where there is not enough room, uncompress() will fill the output
+   buffer with the uncompressed data up to that point.
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest,   uLongf *destLen,
+                                    const Bytef *source, uLong *sourceLen));
+#endif
+/*
+     Same as uncompress, except that sourceLen is a pointer, where the
+   length of the source is *sourceLen.  On return, *sourceLen is the number of
+   source bytes consumed.
+*/
+
+                        /* gzip file access functions */
+
+/*
+     This library supports reading and writing files in gzip (.gz) format with
+   an interface similar to that of stdio, using the functions that start with
+   "gz".  The gzip format is different from the zlib format.  gzip is a gzip
+   wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
+
+typedef struct gzFile_s *gzFile;    /* semi-opaque gzip file descriptor */
+
+/*
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+     Open the gzip (.gz) file at path for reading and decompressing, or
+   compressing and writing.  The mode parameter is as in fopen ("rb" or "wb")
+   but can also include a compression level ("wb9") or a strategy: 'f' for
+   filtered data as in "wb6f", 'h' for Huffman-only compression as in "wb1h",
+   'R' for run-length encoding as in "wb1R", or 'F' for fixed code compression
+   as in "wb9F".  (See the description of deflateInit2 for more information
+   about the strategy parameter.)  'T' will request transparent writing or
+   appending with no compression and not using the gzip format.
+
+     "a" can be used instead of "w" to request that the gzip stream that will
+   be written be appended to the file.  "+" will result in an error, since
+   reading and writing to the same gzip file is not supported.  The addition of
+   "x" when writing will create the file exclusively, which fails if the file
+   already exists.  On systems that support it, the addition of "e" when
+   reading or writing will set the flag to close the file on an execve() call.
+
+     These functions, as well as gzip, will read and decode a sequence of gzip
+   streams in a file.  The append function of gzopen() can be used to create
+   such a file.  (Also see gzflush() for another way to do this.)  When
+   appending, gzopen does not test whether the file begins with a gzip stream,
+   nor does it look for the end of the gzip streams to begin appending.  gzopen
+   will simply append a gzip stream to the existing file.
+
+     gzopen can be used to read a file which is not in gzip format; in this
+   case gzread will directly read from the file without decompression.  When
+   reading, this will be detected automatically by looking for the magic two-
+   byte gzip header.
+
+     gzopen returns NULL if the file could not be opened, if there was
+   insufficient memory to allocate the gzFile state, or if an invalid mode was
+   specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+   errno can be checked to determine if the reason gzopen failed was that the
+   file could not be opened.
+*/
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+     Associate a gzFile with the file descriptor fd.  File descriptors are
+   obtained from calls like open, dup, creat, pipe or fileno (if the file has
+   been previously opened with fopen).  The mode parameter is as in gzopen.
+
+     The next call of gzclose on the returned gzFile will also close the file
+   descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+   fd.  If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+   mode);.  The duplicated descriptor should be saved to avoid a leak, since
+   gzdopen does not close fd if it fails.  If you are using fileno() to get the
+   file descriptor from a FILE *, then you will have to use dup() to avoid
+   double-close()ing the file descriptor.  Both gzclose() and fclose() will
+   close the associated file descriptor, so they need to have different file
+   descriptors.
+
+     gzdopen returns NULL if there was insufficient memory to allocate the
+   gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+   provided, or '+' was provided), or if fd is -1.  The file descriptor is not
+   used until the next gz* read, write, seek, or close operation, so gzdopen
+   will not detect if fd is invalid (unless fd is -1).
+*/
+
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+     Set the internal buffer size used by this library's functions for file to
+   size.  The default buffer size is 8192 bytes.  This function must be called
+   after gzopen() or gzdopen(), and before any other calls that read or write
+   the file.  The buffer memory allocation is always deferred to the first read
+   or write.  Three times that size in buffer space is allocated.  A larger
+   buffer size of, for example, 64K or 128K bytes will noticeably increase the
+   speed of decompression (reading).
+
+     The new buffer size also affects the maximum length for gzprintf().
+
+     gzbuffer() returns 0 on success, or -1 on failure, such as being called
+   too late.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+     Dynamically update the compression level and strategy for file.  See the
+   description of deflateInit2 for the meaning of these parameters. Previously
+   provided data is flushed before applying the parameter changes.
+
+     gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not
+   opened for writing, Z_ERRNO if there is an error writing the flushed data,
+   or Z_MEM_ERROR if there is a memory allocation error.
+*/
+
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+/*
+     Read and decompress up to len uncompressed bytes from file into buf.  If
+   the input file is not in gzip format, gzread copies the given number of
+   bytes into the buffer directly from the file.
+
+     After reaching the end of a gzip stream in the input, gzread will continue
+   to read, looking for another gzip stream.  Any number of gzip streams may be
+   concatenated in the input file, and will all be decompressed by gzread().
+   If something other than a gzip stream is encountered after a gzip stream,
+   that remaining trailing garbage is ignored (and no error is returned).
+
+     gzread can be used to read a gzip file that is being concurrently written.
+   Upon reaching the end of the input, gzread will return with the available
+   data.  If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
+   gzclearerr can be used to clear the end of file indicator in order to permit
+   gzread to be tried again.  Z_OK indicates that a gzip stream was completed
+   on the last gzread.  Z_BUF_ERROR indicates that the input file ended in the
+   middle of a gzip stream.  Note that gzread does not return -1 in the event
+   of an incomplete gzip stream.  This error is deferred until gzclose(), which
+   will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
+   stream.  Alternatively, gzerror can be used before gzclose to detect this
+   case.
+
+     gzread returns the number of uncompressed bytes actually read, less than
+   len for end of file, or -1 for error.  If len is too large to fit in an int,
+   then nothing is read, -1 is returned, and the error state is set to
+   Z_STREAM_ERROR.
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
+                                     gzFile file));
+#endif
+/*
+     Read and decompress up to nitems items of size size from file into buf,
+   otherwise operating as gzread() does.  This duplicates the interface of
+   stdio's fread(), with size_t request and return types.  If the library
+   defines size_t, then z_size_t is identical to size_t.  If not, then z_size_t
+   is an unsigned integer type that can contain a pointer.
+
+     gzfread() returns the number of full items read of size size, or zero if
+   the end of the file was reached and a full item could not be read, or if
+   there was an error.  gzerror() must be consulted if zero is returned in
+   order to determine if there was an error.  If the multiplication of size and
+   nitems overflows, i.e. the product does not fit in a z_size_t, then nothing
+   is read, zero is returned, and the error state is set to Z_STREAM_ERROR.
+
+     In the event that the end of file is reached and only a partial item is
+   available at the end, i.e. the remaining uncompressed data length is not a
+   multiple of size, then the final partial item is nevetheless read into buf
+   and the end-of-file flag is set.  The length of the partial item read is not
+   provided, but could be inferred from the result of gztell().  This behavior
+   is the same as the behavior of fread() implementations in common libraries,
+   but it prevents the direct use of gzfread() to read a concurrently written
+   file, reseting and retrying on end-of-file, when size is not 1.
+*/
+
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file, voidpc buf, unsigned len));
+/*
+     Compress and write the len uncompressed bytes at buf to file. gzwrite
+   returns the number of uncompressed bytes written or 0 in case of error.
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size,
+                                      z_size_t nitems, gzFile file));
+#endif
+/*
+     Compress and write nitems items of size size from buf to file, duplicating
+   the interface of stdio's fwrite(), with size_t request and return types.  If
+   the library defines size_t, then z_size_t is identical to size_t.  If not,
+   then z_size_t is an unsigned integer type that can contain a pointer.
+
+     gzfwrite() returns the number of full items written of size size, or zero
+   if there was an error.  If the multiplication of size and nitems overflows,
+   i.e. the product does not fit in a z_size_t, then nothing is written, zero
+   is returned, and the error state is set to Z_STREAM_ERROR.
+*/
+
+ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
+/*
+     Convert, format, compress, and write the arguments (...) to file under
+   control of the string format, as in fprintf.  gzprintf returns the number of
+   uncompressed bytes actually written, or a negative zlib error code in case
+   of error.  The number of uncompressed bytes written is limited to 8191, or
+   one less than the buffer size given to gzbuffer().  The caller should assure
+   that this limit is not exceeded.  If it is exceeded, then gzprintf() will
+   return an error (0) with nothing written.  In this case, there may also be a
+   buffer overflow with unpredictable consequences, which is possible only if
+   zlib was compiled with the insecure functions sprintf() or vsprintf(),
+   because the secure snprintf() or vsnprintf() functions were not available.
+   This can be determined using zlibCompileFlags().
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+     Compress and write the given null-terminated string s to file, excluding
+   the terminating null character.
+
+     gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+     Read and decompress bytes from file into buf, until len-1 characters are
+   read, or until a newline character is read and transferred to buf, or an
+   end-of-file condition is encountered.  If any characters are read or if len
+   is one, the string is terminated with a null character.  If no characters
+   are read due to an end-of-file or len is less than one, then the buffer is
+   left untouched.
+
+     gzgets returns buf which is a null-terminated string, or it returns NULL
+   for end-of-file or in case of error.  If there was an error, the contents at
+   buf are indeterminate.
+*/
+
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+/*
+     Compress and write c, converted to an unsigned char, into file.  gzputc
+   returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+/*
+     Read and decompress one byte from file.  gzgetc returns this byte or -1
+   in case of end of file or error.  This is implemented as a macro for speed.
+   As such, it does not do all of the checking the other functions do.  I.e.
+   it does not check to see if file is NULL, nor whether the structure file
+   points to has been clobbered or not.
+*/
+
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
+/*
+     Push c back onto the stream for file to be read as the first character on
+   the next read.  At least one character of push-back is always allowed.
+   gzungetc() returns the character pushed, or -1 on failure.  gzungetc() will
+   fail if c is -1, and may fail if a character has been pushed but not read
+   yet.  If gzungetc is used immediately after gzopen or gzdopen, at least the
+   output buffer size of pushed characters is allowed.  (See gzbuffer above.)
+   The pushed character will be discarded if the stream is repositioned with
+   gzseek() or gzrewind().
+*/
+
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+/*
+     Flush all pending output to file.  The parameter flush is as in the
+   deflate() function.  The return value is the zlib error number (see function
+   gzerror below).  gzflush is only permitted when writing.
+
+     If the flush parameter is Z_FINISH, the remaining data is written and the
+   gzip stream is completed in the output.  If gzwrite() is called again, a new
+   gzip stream will be started in the output.  gzread() is able to read such
+   concatenated gzip streams.
+
+     gzflush should be called only when strictly necessary because it will
+   degrade compression if called too often.
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+                                   z_off_t offset, int whence));
+
+     Set the starting position to offset relative to whence for the next gzread
+   or gzwrite on file.  The offset represents a number of bytes in the
+   uncompressed data stream.  The whence parameter is defined as in lseek(2);
+   the value SEEK_END is not supported.
+
+     If the file is opened for reading, this function is emulated but can be
+   extremely slow.  If the file is opened for writing, only forward seeks are
+   supported; gzseek then compresses a sequence of zeroes up to the new
+   starting position.
+
+     gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error, in
+   particular if the file is opened for writing and the new starting position
+   would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
+/*
+     Rewind file. This function is supported only for reading.
+
+     gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET).
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
+
+     Return the starting position for the next gzread or gzwrite on file.
+   This position represents a number of bytes in the uncompressed data stream,
+   and is zero when starting, even if appending or reading a gzip stream from
+   the middle of a file using gzdopen().
+
+     gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+
+     Return the current compressed (actual) read or write offset of file.  This
+   offset includes the count of bytes that precede the gzip stream, for example
+   when appending or when using gzdopen() for reading.  When reading, the
+   offset does not include as yet unused buffered input.  This information can
+   be used for a progress indicator.  On error, gzoffset() returns -1.
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+     Return true (1) if the end-of-file indicator for file has been set while
+   reading, false (0) otherwise.  Note that the end-of-file indicator is set
+   only if the read tried to go past the end of the input, but came up short.
+   Therefore, just like feof(), gzeof() may return false even if there is no
+   more data to read, in the event that the last read request was for the exact
+   number of bytes remaining in the input file.  This will happen if the input
+   file size is an exact multiple of the buffer size.
+
+     If gzeof() returns true, then the read functions will return no more data,
+   unless the end-of-file indicator is reset by gzclearerr() and the input file
+   has grown since the previous end of file was detected.
+*/
+
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+     Return true (1) if file is being copied directly while reading, or false
+   (0) if file is a gzip stream being decompressed.
+
+     If the input file is empty, gzdirect() will return true, since the input
+   does not contain a gzip stream.
+
+     If gzdirect() is used immediately after gzopen() or gzdopen() it will
+   cause buffers to be allocated to allow reading the file to determine if it
+   is a gzip file.  Therefore if gzbuffer() is used, it should be called before
+   gzdirect().
+
+     When writing, gzdirect() returns true (1) if transparent writing was
+   requested ("wT" for the gzopen() mode), or false (0) otherwise.  (Note:
+   gzdirect() is not needed when writing.  Transparent writing must be
+   explicitly requested, so the application already knows the answer.  When
+   linking statically, using gzdirect() will include all of the zlib code for
+   gzip file reading and decompression, which may not be desired.)
+*/
+
+ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
+/*
+     Flush all pending output for file, if necessary, close file and
+   deallocate the (de)compression state.  Note that once file is closed, you
+   cannot call gzerror with file, since its structures have been deallocated.
+   gzclose must not be called more than once on the same file, just as free
+   must not be called more than once on the same allocation.
+
+     gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+   file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
+   last read ended in the middle of a gzip stream, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+     Same as gzclose(), but gzclose_r() is only for use when reading, and
+   gzclose_w() is only for use when writing or appending.  The advantage to
+   using these instead of gzclose() is that they avoid linking in zlib
+   compression or decompression code that is not used when only reading or only
+   writing respectively.  If gzclose() is used, then both compression and
+   decompression code will be included the application when linking to a static
+   zlib library.
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+     Return the error message for the last error which occurred on file.
+   errnum is set to zlib error number.  If an error occurred in the file system
+   and not in the compression library, errnum is set to Z_ERRNO and the
+   application may consult errno to get the exact error code.
+
+     The application must not modify the returned string.  Future calls to
+   this function may invalidate the previously returned string.  If file is
+   closed, then the string previously returned by gzerror will no longer be
+   available.
+
+     gzerror() should be used to distinguish errors from end-of-file for those
+   functions above that do not distinguish those cases in their return values.
+*/
+
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+     Clear the error and end-of-file flags for file.  This is analogous to the
+   clearerr() function in stdio.  This is useful for continuing to read a gzip
+   file that is being written concurrently.
+*/
+
+#endif /* !Z_SOLO */
+
+                        /* checksum functions */
+
+/*
+     These functions are not related to compression but are exported
+   anyway because they might be useful in applications using the compression
+   library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+/*
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum. An Adler-32 value is in the range of a 32-bit
+   unsigned integer. If buf is Z_NULL, this function returns the required
+   initial value for the checksum.
+
+     An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed
+   much faster.
+
+   Usage example:
+
+     uLong adler = adler32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN uLong ZEXPORT adler32_z OF((uLong adler, const Bytef *buf,
+                                    z_size_t len));
+#endif
+/*
+     Same as adler32(), but with a size_t length.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+                                          z_off_t len2));
+
+     Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
+   and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+   each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
+   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.  Note
+   that the z_off_t type (like off_t) is a signed integer.  If len2 is
+   negative, the result has no meaning or utility.
+*/
+
+ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
+/*
+     Update a running CRC-32 with the bytes buf[0..len-1] and return the
+   updated CRC-32. A CRC-32 value is in the range of a 32-bit unsigned integer.
+   If buf is Z_NULL, this function returns the required initial value for the
+   crc. Pre- and post-conditioning (one's complement) is performed within this
+   function so it shouldn't be done by the application.
+
+   Usage example:
+
+     uLong crc = crc32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       crc = crc32(crc, buffer, length);
+     }
+     if (crc != original_crc) error();
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN uLong ZEXPORT crc32_z OF((uLong crc, const Bytef *buf,
+                                  z_size_t len));
+#endif
+/*
+     Same as crc32(), but with a size_t length.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+     Combine two CRC-32 check values into one.  For two sequences of bytes,
+   seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+   calculated for each, crc1 and crc2.  crc32_combine() returns the CRC-32
+   check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+   len2.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine_gen OF((z_off_t len2));
+
+     Return the operator corresponding to length len2, to be used with
+   crc32_combine_op().
+*/
+
+ZEXTERN uLong ZEXPORT crc32_combine_op OF((uLong crc1, uLong crc2, uLong op));
+/*
+     Give the same result as crc32_combine(), using op in place of len2. op is
+   is generated from len2 by crc32_combine_gen(). This will be faster than
+   crc32_combine() if the generated op is used more than once.
+*/
+
+
+                        /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+                                      int windowBits, int memLevel,
+                                      int strategy, const char *version,
+                                      int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                      const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+                                         unsigned char FAR *window,
+                                         const char *version,
+                                         int stream_size));
+#ifdef Z_PREFIX_SET
+#  define z_deflateInit(strm, level) \
+          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_inflateInit(strm) \
+          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_inflateInit2(strm, windowBits) \
+          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                        (int)sizeof(z_stream))
+#  define z_inflateBackInit(strm, windowBits, window) \
+          inflateBackInit_((strm), (windowBits), (window), \
+                           ZLIB_VERSION, (int)sizeof(z_stream))
+#else
+#  define deflateInit(strm, level) \
+          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define inflateInit(strm) \
+          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define inflateInit2(strm, windowBits) \
+          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                        (int)sizeof(z_stream))
+#  define inflateBackInit(strm, windowBits, window) \
+          inflateBackInit_((strm), (windowBits), (window), \
+                           ZLIB_VERSION, (int)sizeof(z_stream))
+#endif
+
+#ifndef Z_SOLO
+
+/* gzgetc() macro and its supporting function and exposed data structure.  Note
+ * that the real internal state is much larger than the exposed structure.
+ * This abbreviated structure exposes just enough for the gzgetc() macro.  The
+ * user should not mess with these exposed elements, since their names or
+ * behavior could change in the future, perhaps even capriciously.  They can
+ * only be used by the gzgetc() macro.  You have been warned.
+ */
+struct gzFile_s {
+    unsigned have;
+    unsigned char *next;
+    z_off64_t pos;
+};
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
+#ifdef Z_PREFIX_SET
+#  undef z_gzgetc
+#  define z_gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
+#elif defined(Z_CR_PREFIX_SET)
+#    undef gzgetc
+#    define gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) \
+                     : (Cr_z_gzgetc)(g))
+#else
+#  define gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
+#endif
+
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#ifdef Z_LARGE64
+   ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+   ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+   ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+   ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+   ZEXTERN uLong ZEXPORT crc32_combine_gen64 OF((z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
+#  ifdef Z_PREFIX_SET
+#    define z_gzopen z_gzopen64
+#    define z_gzseek z_gzseek64
+#    define z_gztell z_gztell64
+#    define z_gzoffset z_gzoffset64
+#    define z_adler32_combine z_adler32_combine64
+#    define z_crc32_combine z_crc32_combine64
+#    define z_crc32_combine_gen z_crc32_combine_gen64
+#  else
+#    ifdef gzopen
+#      undef gzopen
+#    endif
+#    define gzopen gzopen64
+#    ifdef gzseek
+#      undef gzseek
+#    endif
+#    define gzseek gzseek64
+#    ifdef gztell
+#      undef gztell
+#    endif
+#    define gztell gztell64
+#    ifdef gzoffset
+#      undef gzoffset
+#    endif
+#    define gzoffset gzoffset64
+#    ifdef adler32_combine
+#      undef adler32_combine
+#    endif
+#    define adler32_combine adler32_combine64
+#    ifdef crc32_combine
+#      undef crc32_combine
+#    endif
+#    ifdef crc32_combine64
+#      undef crc32_combine64
+#    endif
+#    ifdef crc32_combine_gen
+#      undef crc32_combine_gen
+#    endif
+#    ifdef crc32_combine_op
+#      undef crc32_combine_op
+#    endif
+#  endif
+#  ifndef Z_LARGE64
+     ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+     ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+     ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+     ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+     ZEXTERN uLong ZEXPORT crc32_combine_gen64 OF((z_off_t));
+#  endif
+#else
+   ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+   ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+   ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+   ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine_gen OF((z_off_t));
+#endif
+
+#else /* Z_SOLO */
+
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine_gen OF((z_off_t));
+
+#endif /* !Z_SOLO */
+
+/* undocumented functions */
+ZEXTERN const char   * ZEXPORT zError           OF((int));
+ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
+ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN int            ZEXPORT inflateValidate OF((z_streamp, int));
+#endif
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN unsigned long  ZEXPORT inflateCodesUsed OF ((z_streamp));
+#endif
+ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
+ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
+#if defined(_WIN32) && !defined(Z_SOLO)
+ZEXTERN gzFile         ZEXPORT gzopen_w OF((const wchar_t *path,
+                                            const char *mode));
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifndef Z_SOLO
+#    if !defined(__ANDROID__) || __ANDROID_API__ >= 19
+ZEXTERN int            ZEXPORTVA gzvprintf Z_ARG((gzFile file,
+                                                  const char *format,
+                                                  va_list va));
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZLIB_H */
diff --git a/sysroots/i686-linux-musl/lib/Scrt1-real.o b/sysroots/i686-linux-musl/lib/Scrt1-real.o
index 0b924ce..375d5f6 100644
--- a/sysroots/i686-linux-musl/lib/Scrt1-real.o
+++ b/sysroots/i686-linux-musl/lib/Scrt1-real.o
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/crt1.o b/sysroots/i686-linux-musl/lib/crt1.o
index 85b7f9b..c007151 100644
--- a/sysroots/i686-linux-musl/lib/crt1.o
+++ b/sysroots/i686-linux-musl/lib/crt1.o
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/crtbegin.o b/sysroots/i686-linux-musl/lib/crtbegin.o
new file mode 100755
index 0000000..e689bbd
--- /dev/null
+++ b/sysroots/i686-linux-musl/lib/crtbegin.o
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/crtbeginS.o b/sysroots/i686-linux-musl/lib/crtbeginS.o
new file mode 100755
index 0000000..e689bbd
--- /dev/null
+++ b/sysroots/i686-linux-musl/lib/crtbeginS.o
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/crtbeginT.o b/sysroots/i686-linux-musl/lib/crtbeginT.o
new file mode 100755
index 0000000..e689bbd
--- /dev/null
+++ b/sysroots/i686-linux-musl/lib/crtbeginT.o
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/crtend.o b/sysroots/i686-linux-musl/lib/crtend.o
new file mode 100755
index 0000000..d3398d1
--- /dev/null
+++ b/sysroots/i686-linux-musl/lib/crtend.o
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/crtendS.o b/sysroots/i686-linux-musl/lib/crtendS.o
new file mode 100755
index 0000000..d3398d1
--- /dev/null
+++ b/sysroots/i686-linux-musl/lib/crtendS.o
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/crti.o b/sysroots/i686-linux-musl/lib/crti.o
index 463d185..f632812 100644
--- a/sysroots/i686-linux-musl/lib/crti.o
+++ b/sysroots/i686-linux-musl/lib/crti.o
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/crtn.o b/sysroots/i686-linux-musl/lib/crtn.o
index 23f14a8..c4c2c1b 100644
--- a/sysroots/i686-linux-musl/lib/crtn.o
+++ b/sysroots/i686-linux-musl/lib/crtn.o
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/libc++.a b/sysroots/i686-linux-musl/lib/libc++.a
new file mode 100644
index 0000000..4e4a80a
--- /dev/null
+++ b/sysroots/i686-linux-musl/lib/libc++.a
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/libc++.so b/sysroots/i686-linux-musl/lib/libc++.so
index 7c97c9c..cb14996 100755
--- a/sysroots/i686-linux-musl/lib/libc++.so
+++ b/sysroots/i686-linux-musl/lib/libc++.so
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/libc++abi.a b/sysroots/i686-linux-musl/lib/libc++abi.a
index ce740ec..f16b8a5 100644
--- a/sysroots/i686-linux-musl/lib/libc++abi.a
+++ b/sysroots/i686-linux-musl/lib/libc++abi.a
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/libc.a b/sysroots/i686-linux-musl/lib/libc.a
index 2137af5..9ed6fd0 100644
--- a/sysroots/i686-linux-musl/lib/libc.a
+++ b/sysroots/i686-linux-musl/lib/libc.a
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/libc_musl.so b/sysroots/i686-linux-musl/lib/libc_musl.so
index af34cab..13b5b3e 100755
--- a/sysroots/i686-linux-musl/lib/libc_musl.so
+++ b/sysroots/i686-linux-musl/lib/libc_musl.so
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/libc_musl_linker_object.o b/sysroots/i686-linux-musl/lib/libc_musl_linker_object.o
index 042cc87..ea02e9c 100644
--- a/sysroots/i686-linux-musl/lib/libc_musl_linker_object.o
+++ b/sysroots/i686-linux-musl/lib/libc_musl_linker_object.o
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/libz.a b/sysroots/i686-linux-musl/lib/libz.a
new file mode 100644
index 0000000..5d9bea2
--- /dev/null
+++ b/sysroots/i686-linux-musl/lib/libz.a
Binary files differ
diff --git a/sysroots/i686-linux-musl/lib/linker.script b/sysroots/i686-linux-musl/lib/linker.script
index d9f8b86..aa07361 100755
--- a/sysroots/i686-linux-musl/lib/linker.script
+++ b/sysroots/i686-linux-musl/lib/linker.script
@@ -3,13 +3,13 @@
   .linker_r 0x1000 : {
     KEEP(*(.linker_r));
   }
-  .linker_rx 0x4b330 : {
+  .linker_rx 0x4b3e0 : {
     KEEP(*(.linker_rx));
   }
-  .linker_rw 0x127c40 : {
+  .linker_rw 0x127e90 : {
     KEEP(*(.linker_rw));
   }
-  .linker_rw2 0x129108 : {
+  .linker_rw2 0x129358 : {
     KEEP(*(.linker_rw2));
   }
   /DISCARD/ : { *(.interp) }
diff --git a/sysroots/i686-linux-musl/lib/rcrt1.o b/sysroots/i686-linux-musl/lib/rcrt1.o
index d851a77..1f342bb 100644
--- a/sysroots/i686-linux-musl/lib/rcrt1.o
+++ b/sysroots/i686-linux-musl/lib/rcrt1.o
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/NOTICE.bionic b/sysroots/x86_64-linux-musl/NOTICE.bionic
index 9cbbde2..fa3dd2c 100644
--- a/sysroots/x86_64-linux-musl/NOTICE.bionic
+++ b/sysroots/x86_64-linux-musl/NOTICE.bionic
@@ -783,22 +783,6 @@
 -------------------------------------------------------------------
 
 Copyright (C) 2019 The Android Open Source Project
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-
--------------------------------------------------------------------
-
-Copyright (C) 2019 The Android Open Source Project
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without
@@ -826,34 +810,6 @@
 
 -------------------------------------------------------------------
 
-Copyright (C) 2019 The Android Open Source Project
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in
-   the documentation and/or other materials provided with the
-   distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
-OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
--------------------------------------------------------------------
-
 Copyright (C) 2020 The Android Open Source Project
 All rights reserved.
 
diff --git a/sysroots/x86_64-linux-musl/NOTICE.zlib b/sysroots/x86_64-linux-musl/NOTICE.zlib
new file mode 100644
index 0000000..8aca25d
--- /dev/null
+++ b/sysroots/x86_64-linux-musl/NOTICE.zlib
@@ -0,0 +1,19 @@
+version 1.2.12, March 27th, 2022
+
+Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
+
+This software is provided 'as-is', without any express or implied
+warranty.  In no event will the authors be held liable for any damages
+arising from the use of this software.
+
+Permission is granted to anyone to use this software for any purpose,
+including commercial applications, and to alter it and redistribute it
+freely, subject to the following restrictions:
+
+1. The origin of this software must not be misrepresented; you must not
+   claim that you wrote the original software. If you use this software
+   in a product, an acknowledgment in the product documentation would be
+   appreciated but is not required.
+2. Altered source versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+3. This notice may not be removed or altered from any source distribution.
diff --git a/sysroots/x86_64-linux-musl/include/BUILD b/sysroots/x86_64-linux-musl/include/BUILD
new file mode 100644
index 0000000..2f92464
--- /dev/null
+++ b/sysroots/x86_64-linux-musl/include/BUILD
@@ -0,0 +1,67 @@
+# Copyright (C) 2022 The Android Open Source Project
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#  * Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+
+load("//build/bazel/rules/apis:cc_api_contribution.bzl", "cc_api_headers")
+
+package(default_visibility = ["//bionic/libc:__pkg__"])
+
+cc_api_headers(
+  name="libc_kernel_uapi_headers",
+  hdrs=glob(["**/*.h"]),
+  system=True,
+)
+
+cc_api_headers(
+  name="libc_kernal_uapi_asm_arm_headers",
+  include_dir="asm-arm",
+  hdrs=glob(["asm-arm/**/*.h"]),
+  system=True,
+  arch="arm",
+)
+
+cc_api_headers(
+  name="libc_kernal_uapi_asm_arm64_headers",
+  include_dir="asm-arm64",
+  hdrs=glob(["asm-arm64/**/*.h"]),
+  system=True,
+  arch="arm64",
+)
+
+cc_api_headers(
+  name="libc_kernal_uapi_asm_x86_headers",
+  include_dir="asm-x86",
+  hdrs=glob(["asm-x86/**/*.h"]),
+  system=True,
+  arch="x86",
+)
+
+cc_api_headers(
+  name="libc_kernal_uapi_asm_x86_64_headers",
+  include_dir="asm-x86_64",
+  hdrs=glob(["asm-x86_64/**/*.h"]),
+  system=True,
+  arch="x86_64",
+)
diff --git a/sysroots/x86_64-linux-musl/include/asm-arm/asm/signal.h b/sysroots/x86_64-linux-musl/include/asm-arm/asm/signal.h
index 5f7e0c5..0424380 100644
--- a/sysroots/x86_64-linux-musl/include/asm-arm/asm/signal.h
+++ b/sysroots/x86_64-linux-musl/include/asm-arm/asm/signal.h
@@ -78,6 +78,6 @@
 typedef struct sigaltstack {
   void __user * ss_sp;
   int ss_flags;
-  size_t ss_size;
+  __kernel_size_t ss_size;
 } stack_t;
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/asm-arm64/asm/hwcap.h b/sysroots/x86_64-linux-musl/include/asm-arm64/asm/hwcap.h
index 4316724..e0dbb13 100644
--- a/sysroots/x86_64-linux-musl/include/asm-arm64/asm/hwcap.h
+++ b/sysroots/x86_64-linux-musl/include/asm-arm64/asm/hwcap.h
@@ -72,4 +72,5 @@
 #define HWCAP2_ECV (1 << 19)
 #define HWCAP2_AFP (1 << 20)
 #define HWCAP2_RPRES (1 << 21)
+#define HWCAP2_MTE3 (1 << 22)
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/asm-arm64/asm/kvm.h b/sysroots/x86_64-linux-musl/include/asm-arm64/asm/kvm.h
index c53ee87..eee066b 100644
--- a/sysroots/x86_64-linux-musl/include/asm-arm64/asm/kvm.h
+++ b/sysroots/x86_64-linux-musl/include/asm-arm64/asm/kvm.h
@@ -214,6 +214,7 @@
 #define KVM_ARM_VCPU_PMU_V3_IRQ 0
 #define KVM_ARM_VCPU_PMU_V3_INIT 1
 #define KVM_ARM_VCPU_PMU_V3_FILTER 2
+#define KVM_ARM_VCPU_PMU_V3_SET_PMU 3
 #define KVM_ARM_VCPU_TIMER_CTRL 1
 #define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0
 #define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1
@@ -244,5 +245,7 @@
 #define KVM_PSCI_RET_NI PSCI_RET_NOT_SUPPORTED
 #define KVM_PSCI_RET_INVAL PSCI_RET_INVALID_PARAMS
 #define KVM_PSCI_RET_DENIED PSCI_RET_DENIED
+#define KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2 (1ULL << 0)
+#define KVM_EXIT_FAIL_ENTRY_CPU_UNSUPPORTED (1ULL << 0)
 #endif
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/asm-generic/mman-common.h b/sysroots/x86_64-linux-musl/include/asm-generic/mman-common.h
index 9440576..e96f4cc 100644
--- a/sysroots/x86_64-linux-musl/include/asm-generic/mman-common.h
+++ b/sysroots/x86_64-linux-musl/include/asm-generic/mman-common.h
@@ -62,6 +62,7 @@
 #define MADV_PAGEOUT 21
 #define MADV_POPULATE_READ 22
 #define MADV_POPULATE_WRITE 23
+#define MADV_DONTNEED_LOCKED 24
 #define MAP_FILE 0
 #define PKEY_DISABLE_ACCESS 0x1
 #define PKEY_DISABLE_WRITE 0x2
diff --git a/sysroots/x86_64-linux-musl/include/asm-generic/shmbuf.h b/sysroots/x86_64-linux-musl/include/asm-generic/shmbuf.h
index 067ffbc..11487f4 100644
--- a/sysroots/x86_64-linux-musl/include/asm-generic/shmbuf.h
+++ b/sysroots/x86_64-linux-musl/include/asm-generic/shmbuf.h
@@ -19,9 +19,11 @@
 #ifndef __ASM_GENERIC_SHMBUF_H
 #define __ASM_GENERIC_SHMBUF_H
 #include <asm/bitsperlong.h>
+#include <asm/ipcbuf.h>
+#include <asm/posix_types.h>
 struct shmid64_ds {
   struct ipc64_perm shm_perm;
-  size_t shm_segsz;
+  __kernel_size_t shm_segsz;
 #if __BITS_PER_LONG == 64
   long shm_atime;
   long shm_dtime;
diff --git a/sysroots/x86_64-linux-musl/include/asm-generic/signal.h b/sysroots/x86_64-linux-musl/include/asm-generic/signal.h
index 874fece..5cb1dce 100644
--- a/sysroots/x86_64-linux-musl/include/asm-generic/signal.h
+++ b/sysroots/x86_64-linux-musl/include/asm-generic/signal.h
@@ -84,7 +84,7 @@
 typedef struct sigaltstack {
   void __user * ss_sp;
   int ss_flags;
-  size_t ss_size;
+  __kernel_size_t ss_size;
 } stack_t;
 #endif
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/asm-generic/socket.h b/sysroots/x86_64-linux-musl/include/asm-generic/socket.h
index 6767993..6926187 100644
--- a/sysroots/x86_64-linux-musl/include/asm-generic/socket.h
+++ b/sysroots/x86_64-linux-musl/include/asm-generic/socket.h
@@ -100,6 +100,7 @@
 #define SO_NETNS_COOKIE 71
 #define SO_BUF_LOCK 72
 #define SO_RESERVE_MEM 73
+#define SO_TXREHASH 74
 #if __BITS_PER_LONG == 64 || defined(__x86_64__) && defined(__ILP32__)
 #define SO_TIMESTAMP SO_TIMESTAMP_OLD
 #define SO_TIMESTAMPNS SO_TIMESTAMPNS_OLD
diff --git a/sysroots/x86_64-linux-musl/include/asm-x86/asm/amd_hsmp.h b/sysroots/x86_64-linux-musl/include/asm-x86/asm/amd_hsmp.h
new file mode 100644
index 0000000..ed59bb8
--- /dev/null
+++ b/sysroots/x86_64-linux-musl/include/asm-x86/asm/amd_hsmp.h
@@ -0,0 +1,136 @@
+/****************************************************************************
+ ****************************************************************************
+ ***
+ ***   This header was automatically generated from a Linux kernel header
+ ***   of the same name, to make information necessary for userspace to
+ ***   call into the kernel available to libc.  It contains only constants,
+ ***   structures, and macros generated from the original header, and thus,
+ ***   contains no copyrightable information.
+ ***
+ ***   To edit the content of this header, modify the corresponding
+ ***   source file (e.g. under external/kernel-headers/original/) then
+ ***   run bionic/libc/kernel/tools/update_all.py
+ ***
+ ***   Any manual change here will be lost the next time this script will
+ ***   be run. You've been warned!
+ ***
+ ****************************************************************************
+ ****************************************************************************/
+#ifndef _UAPI_ASM_X86_AMD_HSMP_H_
+#define _UAPI_ASM_X86_AMD_HSMP_H_
+#include <linux/types.h>
+#pragma pack(4)
+#define HSMP_MAX_MSG_LEN 8
+enum hsmp_message_ids {
+  HSMP_TEST = 1,
+  HSMP_GET_SMU_VER,
+  HSMP_GET_PROTO_VER,
+  HSMP_GET_SOCKET_POWER,
+  HSMP_SET_SOCKET_POWER_LIMIT,
+  HSMP_GET_SOCKET_POWER_LIMIT,
+  HSMP_GET_SOCKET_POWER_LIMIT_MAX,
+  HSMP_SET_BOOST_LIMIT,
+  HSMP_SET_BOOST_LIMIT_SOCKET,
+  HSMP_GET_BOOST_LIMIT,
+  HSMP_GET_PROC_HOT,
+  HSMP_SET_XGMI_LINK_WIDTH,
+  HSMP_SET_DF_PSTATE,
+  HSMP_SET_AUTO_DF_PSTATE,
+  HSMP_GET_FCLK_MCLK,
+  HSMP_GET_CCLK_THROTTLE_LIMIT,
+  HSMP_GET_C0_PERCENT,
+  HSMP_SET_NBIO_DPM_LEVEL,
+  HSMP_GET_DDR_BANDWIDTH = 0x14,
+  HSMP_GET_TEMP_MONITOR,
+  HSMP_MSG_ID_MAX,
+};
+struct hsmp_message {
+  __u32 msg_id;
+  __u16 num_args;
+  __u16 response_sz;
+  __u32 args[HSMP_MAX_MSG_LEN];
+  __u16 sock_ind;
+};
+enum hsmp_msg_type {
+  HSMP_RSVD = - 1,
+  HSMP_SET = 0,
+  HSMP_GET = 1,
+};
+struct hsmp_msg_desc {
+  int num_args;
+  int response_sz;
+  enum hsmp_msg_type type;
+};
+static const struct hsmp_msg_desc hsmp_msg_desc_table[] = {
+ {
+    0, 0, HSMP_RSVD
+  }
+ , {
+    1, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    1, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    0, 0, HSMP_SET
+  }
+ , {
+    0, 2, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    0, 0, HSMP_RSVD
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ ,
+};
+#pragma pack()
+#define HSMP_BASE_IOCTL_NR 0xF8
+#define HSMP_IOCTL_CMD _IOWR(HSMP_BASE_IOCTL_NR, 0, struct hsmp_message)
+#endif
diff --git a/sysroots/x86_64-linux-musl/include/asm-x86/asm/processor-flags.h b/sysroots/x86_64-linux-musl/include/asm-x86/asm/processor-flags.h
index 85f9d7e..0a95afd 100644
--- a/sysroots/x86_64-linux-musl/include/asm-x86/asm/processor-flags.h
+++ b/sysroots/x86_64-linux-musl/include/asm-x86/asm/processor-flags.h
@@ -127,6 +127,8 @@
 #define X86_CR4_SMAP _BITUL(X86_CR4_SMAP_BIT)
 #define X86_CR4_PKE_BIT 22
 #define X86_CR4_PKE _BITUL(X86_CR4_PKE_BIT)
+#define X86_CR4_CET_BIT 23
+#define X86_CR4_CET _BITUL(X86_CR4_CET_BIT)
 #define X86_CR8_TPR _AC(0x0000000f, UL)
 #define CX86_PCR0 0x20
 #define CX86_GCR 0xb8
diff --git a/sysroots/x86_64-linux-musl/include/asm-x86/asm/shmbuf.h b/sysroots/x86_64-linux-musl/include/asm-x86/asm/shmbuf.h
index 03e195e..2a0dcb5 100644
--- a/sysroots/x86_64-linux-musl/include/asm-x86/asm/shmbuf.h
+++ b/sysroots/x86_64-linux-musl/include/asm-x86/asm/shmbuf.h
@@ -21,9 +21,11 @@
 #if !defined(__x86_64__) || !defined(__ILP32__)
 #include <asm-generic/shmbuf.h>
 #else
+#include <asm/ipcbuf.h>
+#include <asm/posix_types.h>
 struct shmid64_ds {
   struct ipc64_perm shm_perm;
-  size_t shm_segsz;
+  __kernel_size_t shm_segsz;
   __kernel_long_t shm_atime;
   __kernel_long_t shm_dtime;
   __kernel_long_t shm_ctime;
diff --git a/sysroots/x86_64-linux-musl/include/asm-x86/asm/signal.h b/sysroots/x86_64-linux-musl/include/asm-x86/asm/signal.h
index 8226da8..cbeeac4 100644
--- a/sysroots/x86_64-linux-musl/include/asm-x86/asm/signal.h
+++ b/sysroots/x86_64-linux-musl/include/asm-x86/asm/signal.h
@@ -90,7 +90,7 @@
 typedef struct sigaltstack {
   void __user * ss_sp;
   int ss_flags;
-  size_t ss_size;
+  __kernel_size_t ss_size;
 } stack_t;
 #endif
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/asm/amd_hsmp.h b/sysroots/x86_64-linux-musl/include/asm/amd_hsmp.h
new file mode 100644
index 0000000..ed59bb8
--- /dev/null
+++ b/sysroots/x86_64-linux-musl/include/asm/amd_hsmp.h
@@ -0,0 +1,136 @@
+/****************************************************************************
+ ****************************************************************************
+ ***
+ ***   This header was automatically generated from a Linux kernel header
+ ***   of the same name, to make information necessary for userspace to
+ ***   call into the kernel available to libc.  It contains only constants,
+ ***   structures, and macros generated from the original header, and thus,
+ ***   contains no copyrightable information.
+ ***
+ ***   To edit the content of this header, modify the corresponding
+ ***   source file (e.g. under external/kernel-headers/original/) then
+ ***   run bionic/libc/kernel/tools/update_all.py
+ ***
+ ***   Any manual change here will be lost the next time this script will
+ ***   be run. You've been warned!
+ ***
+ ****************************************************************************
+ ****************************************************************************/
+#ifndef _UAPI_ASM_X86_AMD_HSMP_H_
+#define _UAPI_ASM_X86_AMD_HSMP_H_
+#include <linux/types.h>
+#pragma pack(4)
+#define HSMP_MAX_MSG_LEN 8
+enum hsmp_message_ids {
+  HSMP_TEST = 1,
+  HSMP_GET_SMU_VER,
+  HSMP_GET_PROTO_VER,
+  HSMP_GET_SOCKET_POWER,
+  HSMP_SET_SOCKET_POWER_LIMIT,
+  HSMP_GET_SOCKET_POWER_LIMIT,
+  HSMP_GET_SOCKET_POWER_LIMIT_MAX,
+  HSMP_SET_BOOST_LIMIT,
+  HSMP_SET_BOOST_LIMIT_SOCKET,
+  HSMP_GET_BOOST_LIMIT,
+  HSMP_GET_PROC_HOT,
+  HSMP_SET_XGMI_LINK_WIDTH,
+  HSMP_SET_DF_PSTATE,
+  HSMP_SET_AUTO_DF_PSTATE,
+  HSMP_GET_FCLK_MCLK,
+  HSMP_GET_CCLK_THROTTLE_LIMIT,
+  HSMP_GET_C0_PERCENT,
+  HSMP_SET_NBIO_DPM_LEVEL,
+  HSMP_GET_DDR_BANDWIDTH = 0x14,
+  HSMP_GET_TEMP_MONITOR,
+  HSMP_MSG_ID_MAX,
+};
+struct hsmp_message {
+  __u32 msg_id;
+  __u16 num_args;
+  __u16 response_sz;
+  __u32 args[HSMP_MAX_MSG_LEN];
+  __u16 sock_ind;
+};
+enum hsmp_msg_type {
+  HSMP_RSVD = - 1,
+  HSMP_SET = 0,
+  HSMP_GET = 1,
+};
+struct hsmp_msg_desc {
+  int num_args;
+  int response_sz;
+  enum hsmp_msg_type type;
+};
+static const struct hsmp_msg_desc hsmp_msg_desc_table[] = {
+ {
+    0, 0, HSMP_RSVD
+  }
+ , {
+    1, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    1, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    0, 0, HSMP_SET
+  }
+ , {
+    0, 2, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    1, 0, HSMP_SET
+  }
+ , {
+    0, 0, HSMP_RSVD
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ , {
+    0, 1, HSMP_GET
+  }
+ ,
+};
+#pragma pack()
+#define HSMP_BASE_IOCTL_NR 0xF8
+#define HSMP_IOCTL_CMD _IOWR(HSMP_BASE_IOCTL_NR, 0, struct hsmp_message)
+#endif
diff --git a/sysroots/x86_64-linux-musl/include/asm/processor-flags.h b/sysroots/x86_64-linux-musl/include/asm/processor-flags.h
index 85f9d7e..0a95afd 100644
--- a/sysroots/x86_64-linux-musl/include/asm/processor-flags.h
+++ b/sysroots/x86_64-linux-musl/include/asm/processor-flags.h
@@ -127,6 +127,8 @@
 #define X86_CR4_SMAP _BITUL(X86_CR4_SMAP_BIT)
 #define X86_CR4_PKE_BIT 22
 #define X86_CR4_PKE _BITUL(X86_CR4_PKE_BIT)
+#define X86_CR4_CET_BIT 23
+#define X86_CR4_CET _BITUL(X86_CR4_CET_BIT)
 #define X86_CR8_TPR _AC(0x0000000f, UL)
 #define CX86_PCR0 0x20
 #define CX86_GCR 0xb8
diff --git a/sysroots/x86_64-linux-musl/include/asm/shmbuf.h b/sysroots/x86_64-linux-musl/include/asm/shmbuf.h
index 03e195e..2a0dcb5 100644
--- a/sysroots/x86_64-linux-musl/include/asm/shmbuf.h
+++ b/sysroots/x86_64-linux-musl/include/asm/shmbuf.h
@@ -21,9 +21,11 @@
 #if !defined(__x86_64__) || !defined(__ILP32__)
 #include <asm-generic/shmbuf.h>
 #else
+#include <asm/ipcbuf.h>
+#include <asm/posix_types.h>
 struct shmid64_ds {
   struct ipc64_perm shm_perm;
-  size_t shm_segsz;
+  __kernel_size_t shm_segsz;
   __kernel_long_t shm_atime;
   __kernel_long_t shm_dtime;
   __kernel_long_t shm_ctime;
diff --git a/sysroots/x86_64-linux-musl/include/asm/signal.h b/sysroots/x86_64-linux-musl/include/asm/signal.h
index 8226da8..cbeeac4 100644
--- a/sysroots/x86_64-linux-musl/include/asm/signal.h
+++ b/sysroots/x86_64-linux-musl/include/asm/signal.h
@@ -90,7 +90,7 @@
 typedef struct sigaltstack {
   void __user * ss_sp;
   int ss_flags;
-  size_t ss_size;
+  __kernel_size_t ss_size;
 } stack_t;
 #endif
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/bits/syscall.h b/sysroots/x86_64-linux-musl/include/bits/syscall.h
index a6d4b29..74a17f5 100644
--- a/sysroots/x86_64-linux-musl/include/bits/syscall.h
+++ b/sysroots/x86_64-linux-musl/include/bits/syscall.h
@@ -350,6 +350,11 @@
 #define __NR_pidfd_getfd	438
 #define __NR_faccessat2		439
 #define __NR_process_madvise	440
+#define __NR_epoll_pwait2	441
+#define __NR_mount_setattr	442
+#define __NR_landlock_create_ruleset	444
+#define __NR_landlock_add_rule	445
+#define __NR_landlock_restrict_self	446
 
 #define SYS_read				0
 #define SYS_write				1
@@ -703,3 +708,8 @@
 #define SYS_pidfd_getfd	438
 #define SYS_faccessat2		439
 #define SYS_process_madvise	440
+#define SYS_epoll_pwait2	441
+#define SYS_mount_setattr	442
+#define SYS_landlock_create_ruleset	444
+#define SYS_landlock_add_rule	445
+#define SYS_landlock_restrict_self	446
diff --git a/sysroots/x86_64-linux-musl/include/bits/syscall.h.in b/sysroots/x86_64-linux-musl/include/bits/syscall.h.in
index e943883..c3882de 100644
--- a/sysroots/x86_64-linux-musl/include/bits/syscall.h.in
+++ b/sysroots/x86_64-linux-musl/include/bits/syscall.h.in
@@ -350,4 +350,9 @@
 #define __NR_pidfd_getfd	438
 #define __NR_faccessat2		439
 #define __NR_process_madvise	440
+#define __NR_epoll_pwait2	441
+#define __NR_mount_setattr	442
+#define __NR_landlock_create_ruleset	444
+#define __NR_landlock_add_rule	445
+#define __NR_landlock_restrict_self	446
 
diff --git a/sysroots/x86_64-linux-musl/include/drm/amdgpu_drm.h b/sysroots/x86_64-linux-musl/include/drm/amdgpu_drm.h
index 3764d51..f38b612 100644
--- a/sysroots/x86_64-linux-musl/include/drm/amdgpu_drm.h
+++ b/sysroots/x86_64-linux-musl/include/drm/amdgpu_drm.h
@@ -112,6 +112,8 @@
 #define AMDGPU_CTX_OP_FREE_CTX 2
 #define AMDGPU_CTX_OP_QUERY_STATE 3
 #define AMDGPU_CTX_OP_QUERY_STATE2 4
+#define AMDGPU_CTX_OP_GET_STABLE_PSTATE 5
+#define AMDGPU_CTX_OP_SET_STABLE_PSTATE 6
 #define AMDGPU_CTX_NO_RESET 0
 #define AMDGPU_CTX_GUILTY_RESET 1
 #define AMDGPU_CTX_INNOCENT_RESET 2
@@ -127,6 +129,12 @@
 #define AMDGPU_CTX_PRIORITY_NORMAL 0
 #define AMDGPU_CTX_PRIORITY_HIGH 512
 #define AMDGPU_CTX_PRIORITY_VERY_HIGH 1023
+#define AMDGPU_CTX_STABLE_PSTATE_FLAGS_MASK 0xf
+#define AMDGPU_CTX_STABLE_PSTATE_NONE 0
+#define AMDGPU_CTX_STABLE_PSTATE_STANDARD 1
+#define AMDGPU_CTX_STABLE_PSTATE_MIN_SCLK 2
+#define AMDGPU_CTX_STABLE_PSTATE_MIN_MCLK 3
+#define AMDGPU_CTX_STABLE_PSTATE_PEAK 4
 struct drm_amdgpu_ctx_in {
   __u32 op;
   __u32 flags;
@@ -143,6 +151,10 @@
     __u32 hangs;
     __u32 reset_status;
   } state;
+  struct {
+    __u32 flags;
+    __u32 _pad;
+  } pstate;
 };
 union drm_amdgpu_ctx {
   struct drm_amdgpu_ctx_in in;
@@ -438,6 +450,7 @@
 #define AMDGPU_INFO_FW_TA 0x13
 #define AMDGPU_INFO_FW_DMCUB 0x14
 #define AMDGPU_INFO_FW_TOC 0x15
+#define AMDGPU_INFO_FW_CAP 0x16
 #define AMDGPU_INFO_NUM_BYTES_MOVED 0x0f
 #define AMDGPU_INFO_VRAM_USAGE 0x10
 #define AMDGPU_INFO_GTT_USAGE 0x11
@@ -682,6 +695,8 @@
 #define AMDGPU_FAMILY_NV 143
 #define AMDGPU_FAMILY_VGH 144
 #define AMDGPU_FAMILY_YC 146
+#define AMDGPU_FAMILY_GC_10_3_6 149
+#define AMDGPU_FAMILY_GC_10_3_7 151
 #ifdef __cplusplus
 }
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/drm/msm_drm.h b/sysroots/x86_64-linux-musl/include/drm/msm_drm.h
index b4ba1d0..376f909 100644
--- a/sysroots/x86_64-linux-musl/include/drm/msm_drm.h
+++ b/sysroots/x86_64-linux-musl/include/drm/msm_drm.h
@@ -43,6 +43,7 @@
 #define MSM_PARAM_PP_PGTABLE 0x08
 #define MSM_PARAM_FAULTS 0x09
 #define MSM_PARAM_SUSPENDS 0x0a
+#define MSM_PARAM_SYSPROF 0x0b
 #define MSM_PARAM_NR_RINGS MSM_PARAM_PRIORITIES
 struct drm_msm_param {
   __u32 pipe;
@@ -119,7 +120,8 @@
 #define MSM_SUBMIT_SUDO 0x10000000
 #define MSM_SUBMIT_SYNCOBJ_IN 0x08000000
 #define MSM_SUBMIT_SYNCOBJ_OUT 0x04000000
-#define MSM_SUBMIT_FLAGS (MSM_SUBMIT_NO_IMPLICIT | MSM_SUBMIT_FENCE_FD_IN | MSM_SUBMIT_FENCE_FD_OUT | MSM_SUBMIT_SUDO | MSM_SUBMIT_SYNCOBJ_IN | MSM_SUBMIT_SYNCOBJ_OUT | 0)
+#define MSM_SUBMIT_FENCE_SN_IN 0x02000000
+#define MSM_SUBMIT_FLAGS (MSM_SUBMIT_NO_IMPLICIT | MSM_SUBMIT_FENCE_FD_IN | MSM_SUBMIT_FENCE_FD_OUT | MSM_SUBMIT_SUDO | MSM_SUBMIT_SYNCOBJ_IN | MSM_SUBMIT_SYNCOBJ_OUT | MSM_SUBMIT_FENCE_SN_IN | 0)
 #define MSM_SUBMIT_SYNCOBJ_RESET 0x00000001
 #define MSM_SUBMIT_SYNCOBJ_FLAGS (MSM_SUBMIT_SYNCOBJ_RESET | 0)
 struct drm_msm_gem_submit_syncobj {
@@ -172,6 +174,7 @@
   __u32 pad;
 };
 #define DRM_MSM_GET_PARAM 0x00
+#define DRM_MSM_SET_PARAM 0x01
 #define DRM_MSM_GEM_NEW 0x02
 #define DRM_MSM_GEM_INFO 0x03
 #define DRM_MSM_GEM_CPU_PREP 0x04
@@ -183,6 +186,7 @@
 #define DRM_MSM_SUBMITQUEUE_CLOSE 0x0B
 #define DRM_MSM_SUBMITQUEUE_QUERY 0x0C
 #define DRM_IOCTL_MSM_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GET_PARAM, struct drm_msm_param)
+#define DRM_IOCTL_MSM_SET_PARAM DRM_IOW(DRM_COMMAND_BASE + DRM_MSM_SET_PARAM, struct drm_msm_param)
 #define DRM_IOCTL_MSM_GEM_NEW DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_NEW, struct drm_msm_gem_new)
 #define DRM_IOCTL_MSM_GEM_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_INFO, struct drm_msm_gem_info)
 #define DRM_IOCTL_MSM_GEM_CPU_PREP DRM_IOW(DRM_COMMAND_BASE + DRM_MSM_GEM_CPU_PREP, struct drm_msm_gem_cpu_prep)
diff --git a/sysroots/x86_64-linux-musl/include/elf.h b/sysroots/x86_64-linux-musl/include/elf.h
index 5170f3e..86e2f0b 100644
--- a/sysroots/x86_64-linux-musl/include/elf.h
+++ b/sysroots/x86_64-linux-musl/include/elf.h
@@ -687,6 +687,7 @@
 #define NT_ARM_PACA_KEYS	0x407
 #define NT_ARM_PACG_KEYS	0x408
 #define NT_ARM_TAGGED_ADDR_CTRL	0x409
+#define NT_ARM_PAC_ENABLED_KEYS	0x40a
 #define NT_METAG_CBUF	0x500
 #define NT_METAG_RPIPE	0x501
 #define NT_METAG_TLS	0x502
diff --git a/sysroots/x86_64-linux-musl/include/linux/android/binder.h b/sysroots/x86_64-linux-musl/include/linux/android/binder.h
index ded1756..34ccf44 100644
--- a/sysroots/x86_64-linux-musl/include/linux/android/binder.h
+++ b/sysroots/x86_64-linux-musl/include/linux/android/binder.h
@@ -155,7 +155,11 @@
   binder_uintptr_t cookie;
   __u32 code;
   __u32 flags;
-  pid_t sender_pid;
+  __kernel_pid_t sender_pid;
+  /* Modified to __kernel_uid_t in the headers but this is not the same size
+   * as uid_t on 32 bit systems. This is fixed in upstream, but wait until
+   * 5.19 to get the fix. See b/234125620.
+   */
   uid_t sender_euid;
   binder_size_t data_size;
   binder_size_t offsets_size;
diff --git a/sysroots/x86_64-linux-musl/include/linux/bpf.h b/sysroots/x86_64-linux-musl/include/linux/bpf.h
index d363e81..8de48a1 100644
--- a/sysroots/x86_64-linux-musl/include/linux/bpf.h
+++ b/sysroots/x86_64-linux-musl/include/linux/bpf.h
@@ -228,6 +228,7 @@
   BPF_SK_REUSEPORT_SELECT,
   BPF_SK_REUSEPORT_SELECT_OR_MIGRATE,
   BPF_PERF_EVENT,
+  BPF_TRACE_KPROBE_MULTI,
   __MAX_BPF_ATTACH_TYPE
 };
 #define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
@@ -240,6 +241,7 @@
   BPF_LINK_TYPE_NETNS = 5,
   BPF_LINK_TYPE_XDP = 6,
   BPF_LINK_TYPE_PERF_EVENT = 7,
+  BPF_LINK_TYPE_KPROBE_MULTI = 8,
   MAX_BPF_LINK_TYPE,
 };
 #define BPF_F_ALLOW_OVERRIDE (1U << 0)
@@ -250,6 +252,8 @@
 #define BPF_F_TEST_RND_HI32 (1U << 2)
 #define BPF_F_TEST_STATE_FREQ (1U << 3)
 #define BPF_F_SLEEPABLE (1U << 4)
+#define BPF_F_XDP_HAS_FRAGS (1U << 5)
+#define BPF_F_KPROBE_MULTI_RETURN (1U << 0)
 #define BPF_PSEUDO_MAP_FD 1
 #define BPF_PSEUDO_MAP_IDX 5
 #define BPF_PSEUDO_MAP_VALUE 2
@@ -281,6 +285,7 @@
 };
 #define BPF_F_QUERY_EFFECTIVE (1U << 0)
 #define BPF_F_TEST_RUN_ON_CPU (1U << 0)
+#define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1)
 enum bpf_stats_type {
   BPF_STATS_RUN_TIME = 0,
 };
@@ -392,6 +397,7 @@
     __aligned_u64 ctx_out;
     __u32 flags;
     __u32 cpu;
+    __u32 batch_size;
   } test;
   struct {
     union {
@@ -456,6 +462,13 @@
       struct {
         __u64 bpf_cookie;
       } perf_event;
+      struct {
+        __u32 flags;
+        __u32 cnt;
+        __aligned_u64 syms;
+        __aligned_u64 addrs;
+        __aligned_u64 cookies;
+      } kprobe_multi;
     };
   } link_create;
   struct {
@@ -480,7 +493,7 @@
     __u32 flags;
   } prog_bind_map;
 } __attribute__((aligned(8)));
-#define __BPF_FUNC_MAPPER(FN) FN(unspec), FN(map_lookup_elem), FN(map_update_elem), FN(map_delete_elem), FN(probe_read), FN(ktime_get_ns), FN(trace_printk), FN(get_prandom_u32), FN(get_smp_processor_id), FN(skb_store_bytes), FN(l3_csum_replace), FN(l4_csum_replace), FN(tail_call), FN(clone_redirect), FN(get_current_pid_tgid), FN(get_current_uid_gid), FN(get_current_comm), FN(get_cgroup_classid), FN(skb_vlan_push), FN(skb_vlan_pop), FN(skb_get_tunnel_key), FN(skb_set_tunnel_key), FN(perf_event_read), FN(redirect), FN(get_route_realm), FN(perf_event_output), FN(skb_load_bytes), FN(get_stackid), FN(csum_diff), FN(skb_get_tunnel_opt), FN(skb_set_tunnel_opt), FN(skb_change_proto), FN(skb_change_type), FN(skb_under_cgroup), FN(get_hash_recalc), FN(get_current_task), FN(probe_write_user), FN(current_task_under_cgroup), FN(skb_change_tail), FN(skb_pull_data), FN(csum_update), FN(set_hash_invalid), FN(get_numa_node_id), FN(skb_change_head), FN(xdp_adjust_head), FN(probe_read_str), FN(get_socket_cookie), FN(get_socket_uid), FN(set_hash), FN(setsockopt), FN(skb_adjust_room), FN(redirect_map), FN(sk_redirect_map), FN(sock_map_update), FN(xdp_adjust_meta), FN(perf_event_read_value), FN(perf_prog_read_value), FN(getsockopt), FN(override_return), FN(sock_ops_cb_flags_set), FN(msg_redirect_map), FN(msg_apply_bytes), FN(msg_cork_bytes), FN(msg_pull_data), FN(bind), FN(xdp_adjust_tail), FN(skb_get_xfrm_state), FN(get_stack), FN(skb_load_bytes_relative), FN(fib_lookup), FN(sock_hash_update), FN(msg_redirect_hash), FN(sk_redirect_hash), FN(lwt_push_encap), FN(lwt_seg6_store_bytes), FN(lwt_seg6_adjust_srh), FN(lwt_seg6_action), FN(rc_repeat), FN(rc_keydown), FN(skb_cgroup_id), FN(get_current_cgroup_id), FN(get_local_storage), FN(sk_select_reuseport), FN(skb_ancestor_cgroup_id), FN(sk_lookup_tcp), FN(sk_lookup_udp), FN(sk_release), FN(map_push_elem), FN(map_pop_elem), FN(map_peek_elem), FN(msg_push_data), FN(msg_pop_data), FN(rc_pointer_rel), FN(spin_lock), FN(spin_unlock), FN(sk_fullsock), FN(tcp_sock), FN(skb_ecn_set_ce), FN(get_listener_sock), FN(skc_lookup_tcp), FN(tcp_check_syncookie), FN(sysctl_get_name), FN(sysctl_get_current_value), FN(sysctl_get_new_value), FN(sysctl_set_new_value), FN(strtol), FN(strtoul), FN(sk_storage_get), FN(sk_storage_delete), FN(send_signal), FN(tcp_gen_syncookie), FN(skb_output), FN(probe_read_user), FN(probe_read_kernel), FN(probe_read_user_str), FN(probe_read_kernel_str), FN(tcp_send_ack), FN(send_signal_thread), FN(jiffies64), FN(read_branch_records), FN(get_ns_current_pid_tgid), FN(xdp_output), FN(get_netns_cookie), FN(get_current_ancestor_cgroup_id), FN(sk_assign), FN(ktime_get_boot_ns), FN(seq_printf), FN(seq_write), FN(sk_cgroup_id), FN(sk_ancestor_cgroup_id), FN(ringbuf_output), FN(ringbuf_reserve), FN(ringbuf_submit), FN(ringbuf_discard), FN(ringbuf_query), FN(csum_level), FN(skc_to_tcp6_sock), FN(skc_to_tcp_sock), FN(skc_to_tcp_timewait_sock), FN(skc_to_tcp_request_sock), FN(skc_to_udp6_sock), FN(get_task_stack), FN(load_hdr_opt), FN(store_hdr_opt), FN(reserve_hdr_opt), FN(inode_storage_get), FN(inode_storage_delete), FN(d_path), FN(copy_from_user), FN(snprintf_btf), FN(seq_printf_btf), FN(skb_cgroup_classid), FN(redirect_neigh), FN(per_cpu_ptr), FN(this_cpu_ptr), FN(redirect_peer), FN(task_storage_get), FN(task_storage_delete), FN(get_current_task_btf), FN(bprm_opts_set), FN(ktime_get_coarse_ns), FN(ima_inode_hash), FN(sock_from_file), FN(check_mtu), FN(for_each_map_elem), FN(snprintf), FN(sys_bpf), FN(btf_find_by_name_kind), FN(sys_close), FN(timer_init), FN(timer_set_callback), FN(timer_start), FN(timer_cancel), FN(get_func_ip), FN(get_attach_cookie), FN(task_pt_regs), FN(get_branch_snapshot), FN(trace_vprintk), FN(skc_to_unix_sock), FN(kallsyms_lookup_name), FN(find_vma), FN(loop), FN(strncmp), FN(get_func_arg), FN(get_func_ret), FN(get_func_arg_cnt),
+#define __BPF_FUNC_MAPPER(FN) FN(unspec), FN(map_lookup_elem), FN(map_update_elem), FN(map_delete_elem), FN(probe_read), FN(ktime_get_ns), FN(trace_printk), FN(get_prandom_u32), FN(get_smp_processor_id), FN(skb_store_bytes), FN(l3_csum_replace), FN(l4_csum_replace), FN(tail_call), FN(clone_redirect), FN(get_current_pid_tgid), FN(get_current_uid_gid), FN(get_current_comm), FN(get_cgroup_classid), FN(skb_vlan_push), FN(skb_vlan_pop), FN(skb_get_tunnel_key), FN(skb_set_tunnel_key), FN(perf_event_read), FN(redirect), FN(get_route_realm), FN(perf_event_output), FN(skb_load_bytes), FN(get_stackid), FN(csum_diff), FN(skb_get_tunnel_opt), FN(skb_set_tunnel_opt), FN(skb_change_proto), FN(skb_change_type), FN(skb_under_cgroup), FN(get_hash_recalc), FN(get_current_task), FN(probe_write_user), FN(current_task_under_cgroup), FN(skb_change_tail), FN(skb_pull_data), FN(csum_update), FN(set_hash_invalid), FN(get_numa_node_id), FN(skb_change_head), FN(xdp_adjust_head), FN(probe_read_str), FN(get_socket_cookie), FN(get_socket_uid), FN(set_hash), FN(setsockopt), FN(skb_adjust_room), FN(redirect_map), FN(sk_redirect_map), FN(sock_map_update), FN(xdp_adjust_meta), FN(perf_event_read_value), FN(perf_prog_read_value), FN(getsockopt), FN(override_return), FN(sock_ops_cb_flags_set), FN(msg_redirect_map), FN(msg_apply_bytes), FN(msg_cork_bytes), FN(msg_pull_data), FN(bind), FN(xdp_adjust_tail), FN(skb_get_xfrm_state), FN(get_stack), FN(skb_load_bytes_relative), FN(fib_lookup), FN(sock_hash_update), FN(msg_redirect_hash), FN(sk_redirect_hash), FN(lwt_push_encap), FN(lwt_seg6_store_bytes), FN(lwt_seg6_adjust_srh), FN(lwt_seg6_action), FN(rc_repeat), FN(rc_keydown), FN(skb_cgroup_id), FN(get_current_cgroup_id), FN(get_local_storage), FN(sk_select_reuseport), FN(skb_ancestor_cgroup_id), FN(sk_lookup_tcp), FN(sk_lookup_udp), FN(sk_release), FN(map_push_elem), FN(map_pop_elem), FN(map_peek_elem), FN(msg_push_data), FN(msg_pop_data), FN(rc_pointer_rel), FN(spin_lock), FN(spin_unlock), FN(sk_fullsock), FN(tcp_sock), FN(skb_ecn_set_ce), FN(get_listener_sock), FN(skc_lookup_tcp), FN(tcp_check_syncookie), FN(sysctl_get_name), FN(sysctl_get_current_value), FN(sysctl_get_new_value), FN(sysctl_set_new_value), FN(strtol), FN(strtoul), FN(sk_storage_get), FN(sk_storage_delete), FN(send_signal), FN(tcp_gen_syncookie), FN(skb_output), FN(probe_read_user), FN(probe_read_kernel), FN(probe_read_user_str), FN(probe_read_kernel_str), FN(tcp_send_ack), FN(send_signal_thread), FN(jiffies64), FN(read_branch_records), FN(get_ns_current_pid_tgid), FN(xdp_output), FN(get_netns_cookie), FN(get_current_ancestor_cgroup_id), FN(sk_assign), FN(ktime_get_boot_ns), FN(seq_printf), FN(seq_write), FN(sk_cgroup_id), FN(sk_ancestor_cgroup_id), FN(ringbuf_output), FN(ringbuf_reserve), FN(ringbuf_submit), FN(ringbuf_discard), FN(ringbuf_query), FN(csum_level), FN(skc_to_tcp6_sock), FN(skc_to_tcp_sock), FN(skc_to_tcp_timewait_sock), FN(skc_to_tcp_request_sock), FN(skc_to_udp6_sock), FN(get_task_stack), FN(load_hdr_opt), FN(store_hdr_opt), FN(reserve_hdr_opt), FN(inode_storage_get), FN(inode_storage_delete), FN(d_path), FN(copy_from_user), FN(snprintf_btf), FN(seq_printf_btf), FN(skb_cgroup_classid), FN(redirect_neigh), FN(per_cpu_ptr), FN(this_cpu_ptr), FN(redirect_peer), FN(task_storage_get), FN(task_storage_delete), FN(get_current_task_btf), FN(bprm_opts_set), FN(ktime_get_coarse_ns), FN(ima_inode_hash), FN(sock_from_file), FN(check_mtu), FN(for_each_map_elem), FN(snprintf), FN(sys_bpf), FN(btf_find_by_name_kind), FN(sys_close), FN(timer_init), FN(timer_set_callback), FN(timer_start), FN(timer_cancel), FN(get_func_ip), FN(get_attach_cookie), FN(task_pt_regs), FN(get_branch_snapshot), FN(trace_vprintk), FN(skc_to_unix_sock), FN(kallsyms_lookup_name), FN(find_vma), FN(loop), FN(strncmp), FN(get_func_arg), FN(get_func_ret), FN(get_func_arg_cnt), FN(get_retval), FN(set_retval), FN(xdp_get_buff_len), FN(xdp_load_bytes), FN(xdp_store_bytes), FN(copy_from_user_task), FN(skb_set_tstamp), FN(ima_file_hash),
 #define __BPF_ENUM_FN(x) BPF_FUNC_ ##x
 enum bpf_func_id {
   __BPF_FUNC_MAPPER(__BPF_ENUM_FN) __BPF_FUNC_MAX_ID,
@@ -595,6 +608,10 @@
 };
 #define __bpf_md_ptr(type,name) union { type name; __u64 : 64; \
 } __attribute__((aligned(8)))
+enum {
+  BPF_SKB_TSTAMP_UNSPEC,
+  BPF_SKB_TSTAMP_DELIVERY_MONO,
+};
 struct __sk_buff {
   __u32 len;
   __u32 pkt_type;
@@ -628,7 +645,8 @@
   __u32 gso_segs;
   __bpf_md_ptr(struct bpf_sock *, sk);
   __u32 gso_size;
-  __u32 : 32;
+  __u8 tstamp_type;
+  __u32 : 24;
   __u64 hwtstamp;
 };
 struct bpf_tunnel_key {
@@ -668,7 +686,8 @@
   __u32 src_ip4;
   __u32 src_ip6[4];
   __u32 src_port;
-  __u32 dst_port;
+  __be16 dst_port;
+  __u16 : 16;
   __u32 dst_ip4;
   __u32 dst_ip6[4];
   __u32 state;
@@ -1160,7 +1179,8 @@
   __u32 protocol;
   __u32 remote_ip4;
   __u32 remote_ip6[4];
-  __u32 remote_port;
+  __be16 remote_port;
+  __u16 : 16;
   __u32 local_ip4;
   __u32 local_ip6[4];
   __u32 local_port;
diff --git a/sysroots/x86_64-linux-musl/include/linux/btrfs.h b/sysroots/x86_64-linux-musl/include/linux/btrfs.h
index 08b96a3..9f76d52 100644
--- a/sysroots/x86_64-linux-musl/include/linux/btrfs.h
+++ b/sysroots/x86_64-linux-musl/include/linux/btrfs.h
@@ -189,6 +189,7 @@
 #define BTRFS_FEATURE_INCOMPAT_METADATA_UUID (1ULL << 10)
 #define BTRFS_FEATURE_INCOMPAT_RAID1C34 (1ULL << 11)
 #define BTRFS_FEATURE_INCOMPAT_ZONED (1ULL << 12)
+#define BTRFS_FEATURE_INCOMPAT_EXTENT_TREE_V2 (1ULL << 13)
 struct btrfs_ioctl_feature_flags {
   __u64 compat_flags;
   __u64 compat_ro_flags;
@@ -461,6 +462,29 @@
   __u8 num_items;
   __u8 align[7];
 };
+struct btrfs_ioctl_encoded_io_args {
+  const struct iovec __user * iov;
+  unsigned long iovcnt;
+  __s64 offset;
+  __u64 flags;
+  __u64 len;
+  __u64 unencoded_len;
+  __u64 unencoded_offset;
+  __u32 compression;
+  __u32 encryption;
+  __u8 reserved[64];
+};
+#define BTRFS_ENCODED_IO_COMPRESSION_NONE 0
+#define BTRFS_ENCODED_IO_COMPRESSION_ZLIB 1
+#define BTRFS_ENCODED_IO_COMPRESSION_ZSTD 2
+#define BTRFS_ENCODED_IO_COMPRESSION_LZO_4K 3
+#define BTRFS_ENCODED_IO_COMPRESSION_LZO_8K 4
+#define BTRFS_ENCODED_IO_COMPRESSION_LZO_16K 5
+#define BTRFS_ENCODED_IO_COMPRESSION_LZO_32K 6
+#define BTRFS_ENCODED_IO_COMPRESSION_LZO_64K 7
+#define BTRFS_ENCODED_IO_COMPRESSION_TYPES 8
+#define BTRFS_ENCODED_IO_ENCRYPTION_NONE 0
+#define BTRFS_ENCODED_IO_ENCRYPTION_TYPES 1
 enum btrfs_err_code {
   BTRFS_ERROR_DEV_RAID1_MIN_NOT_MET = 1,
   BTRFS_ERROR_DEV_RAID10_MIN_NOT_MET,
@@ -534,4 +558,6 @@
 #define BTRFS_IOC_GET_SUBVOL_ROOTREF _IOWR(BTRFS_IOCTL_MAGIC, 61, struct btrfs_ioctl_get_subvol_rootref_args)
 #define BTRFS_IOC_INO_LOOKUP_USER _IOWR(BTRFS_IOCTL_MAGIC, 62, struct btrfs_ioctl_ino_lookup_user_args)
 #define BTRFS_IOC_SNAP_DESTROY_V2 _IOW(BTRFS_IOCTL_MAGIC, 63, struct btrfs_ioctl_vol_args_v2)
+#define BTRFS_IOC_ENCODED_READ _IOR(BTRFS_IOCTL_MAGIC, 64, struct btrfs_ioctl_encoded_io_args)
+#define BTRFS_IOC_ENCODED_WRITE _IOW(BTRFS_IOCTL_MAGIC, 64, struct btrfs_ioctl_encoded_io_args)
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/btrfs_tree.h b/sysroots/x86_64-linux-musl/include/linux/btrfs_tree.h
index 0476733..8e3c6fe 100644
--- a/sysroots/x86_64-linux-musl/include/linux/btrfs_tree.h
+++ b/sysroots/x86_64-linux-musl/include/linux/btrfs_tree.h
@@ -31,6 +31,7 @@
 #define BTRFS_QUOTA_TREE_OBJECTID 8ULL
 #define BTRFS_UUID_TREE_OBJECTID 9ULL
 #define BTRFS_FREE_SPACE_TREE_OBJECTID 10ULL
+#define BTRFS_BLOCK_GROUP_TREE_OBJECTID 11ULL
 #define BTRFS_DEV_STATS_OBJECTID 0ULL
 #define BTRFS_BALANCE_OBJECTID - 4ULL
 #define BTRFS_ORPHAN_OBJECTID - 5ULL
diff --git a/sysroots/x86_64-linux-musl/include/linux/can/isotp.h b/sysroots/x86_64-linux-musl/include/linux/can/isotp.h
index dd5e4f5..57d3001 100644
--- a/sysroots/x86_64-linux-musl/include/linux/can/isotp.h
+++ b/sysroots/x86_64-linux-musl/include/linux/can/isotp.h
@@ -59,11 +59,12 @@
 #define CAN_ISOTP_DEFAULT_FLAGS 0
 #define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00
 #define CAN_ISOTP_DEFAULT_PAD_CONTENT 0xCC
-#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 0
+#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 50000
 #define CAN_ISOTP_DEFAULT_RECV_BS 0
 #define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00
 #define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0
 #define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU
 #define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN
 #define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0
+#define CAN_ISOTP_FRAME_TXTIME_ZERO 0xFFFFFFFF
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/counter.h b/sysroots/x86_64-linux-musl/include/linux/counter.h
index 091e33d..4b86b28 100644
--- a/sysroots/x86_64-linux-musl/include/linux/counter.h
+++ b/sysroots/x86_64-linux-musl/include/linux/counter.h
@@ -45,6 +45,7 @@
   COUNTER_EVENT_OVERFLOW_UNDERFLOW,
   COUNTER_EVENT_THRESHOLD,
   COUNTER_EVENT_INDEX,
+  COUNTER_EVENT_CHANGE_OF_STATE,
 };
 struct counter_watch {
   struct counter_component component;
diff --git a/sysroots/x86_64-linux-musl/include/linux/dm-ioctl.h b/sysroots/x86_64-linux-musl/include/linux/dm-ioctl.h
index 09f8a98..98cbc1f 100644
--- a/sysroots/x86_64-linux-musl/include/linux/dm-ioctl.h
+++ b/sysroots/x86_64-linux-musl/include/linux/dm-ioctl.h
@@ -106,9 +106,9 @@
 #define DM_TARGET_MSG _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, struct dm_ioctl)
 #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
 #define DM_VERSION_MAJOR 4
-#define DM_VERSION_MINOR 45
+#define DM_VERSION_MINOR 46
 #define DM_VERSION_PATCHLEVEL 0
-#define DM_VERSION_EXTRA "-ioctl(2021-03-22)"
+#define DM_VERSION_EXTRA "-ioctl(2022-02-22)"
 #define DM_READONLY_FLAG (1 << 0)
 #define DM_SUSPEND_FLAG (1 << 1)
 #define DM_PERSISTENT_DEV_FLAG (1 << 3)
diff --git a/sysroots/x86_64-linux-musl/include/linux/dma-buf.h b/sysroots/x86_64-linux-musl/include/linux/dma-buf.h
index 221c20f..4e31379 100644
--- a/sysroots/x86_64-linux-musl/include/linux/dma-buf.h
+++ b/sysroots/x86_64-linux-musl/include/linux/dma-buf.h
@@ -32,6 +32,6 @@
 #define DMA_BUF_BASE 'b'
 #define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)
 #define DMA_BUF_SET_NAME _IOW(DMA_BUF_BASE, 1, const char *)
-#define DMA_BUF_SET_NAME_A _IOW(DMA_BUF_BASE, 1, u32)
-#define DMA_BUF_SET_NAME_B _IOW(DMA_BUF_BASE, 1, u64)
+#define DMA_BUF_SET_NAME_A _IOW(DMA_BUF_BASE, 1, __u32)
+#define DMA_BUF_SET_NAME_B _IOW(DMA_BUF_BASE, 1, __u64)
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/elf.h b/sysroots/x86_64-linux-musl/include/linux/elf.h
index 7655f12..65ab245 100644
--- a/sysroots/x86_64-linux-musl/include/linux/elf.h
+++ b/sysroots/x86_64-linux-musl/include/linux/elf.h
@@ -45,9 +45,11 @@
 #define PT_HIOS 0x6fffffff
 #define PT_LOPROC 0x70000000
 #define PT_HIPROC 0x7fffffff
-#define PT_GNU_EH_FRAME 0x6474e550
-#define PT_GNU_PROPERTY 0x6474e553
+#define PT_GNU_EH_FRAME (PT_LOOS + 0x474e550)
 #define PT_GNU_STACK (PT_LOOS + 0x474e551)
+#define PT_GNU_RELRO (PT_LOOS + 0x474e552)
+#define PT_GNU_PROPERTY (PT_LOOS + 0x474e553)
+#define PT_AARCH64_MEMTAG_MTE (PT_LOPROC + 0x2)
 #define PN_XNUM 0xffff
 #define ET_NONE 0
 #define ET_REL 1
diff --git a/sysroots/x86_64-linux-musl/include/linux/ethtool_netlink.h b/sysroots/x86_64-linux-musl/include/linux/ethtool_netlink.h
index 7dcae22..8e1f38f 100644
--- a/sysroots/x86_64-linux-musl/include/linux/ethtool_netlink.h
+++ b/sysroots/x86_64-linux-musl/include/linux/ethtool_netlink.h
@@ -240,6 +240,11 @@
   ETHTOOL_A_PRIVFLAGS_MAX = __ETHTOOL_A_PRIVFLAGS_CNT - 1
 };
 enum {
+  ETHTOOL_TCP_DATA_SPLIT_UNKNOWN = 0,
+  ETHTOOL_TCP_DATA_SPLIT_DISABLED,
+  ETHTOOL_TCP_DATA_SPLIT_ENABLED,
+};
+enum {
   ETHTOOL_A_RINGS_UNSPEC,
   ETHTOOL_A_RINGS_HEADER,
   ETHTOOL_A_RINGS_RX_MAX,
@@ -251,6 +256,8 @@
   ETHTOOL_A_RINGS_RX_JUMBO,
   ETHTOOL_A_RINGS_TX,
   ETHTOOL_A_RINGS_RX_BUF_LEN,
+  ETHTOOL_A_RINGS_TCP_DATA_SPLIT,
+  ETHTOOL_A_RINGS_CQE_SIZE,
   __ETHTOOL_A_RINGS_CNT,
   ETHTOOL_A_RINGS_MAX = (__ETHTOOL_A_RINGS_CNT - 1)
 };
diff --git a/sysroots/x86_64-linux-musl/include/linux/fsi.h b/sysroots/x86_64-linux-musl/include/linux/fsi.h
index fc88464..b080c21 100644
--- a/sysroots/x86_64-linux-musl/include/linux/fsi.h
+++ b/sysroots/x86_64-linux-musl/include/linux/fsi.h
@@ -48,4 +48,5 @@
 #define FSI_SCOM_READ _IOWR('s', 0x01, struct scom_access)
 #define FSI_SCOM_WRITE _IOWR('s', 0x02, struct scom_access)
 #define FSI_SCOM_RESET _IOW('s', 0x03, __u32)
+#define FSI_SBEFIFO_READ_TIMEOUT_SECONDS _IOW('s', 0x00, __u32)
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/gtp.h b/sysroots/x86_64-linux-musl/include/linux/gtp.h
index 3b9416e..20bc3d6 100644
--- a/sysroots/x86_64-linux-musl/include/linux/gtp.h
+++ b/sysroots/x86_64-linux-musl/include/linux/gtp.h
@@ -23,6 +23,7 @@
   GTP_CMD_NEWPDP,
   GTP_CMD_DELPDP,
   GTP_CMD_GETPDP,
+  GTP_CMD_ECHOREQ,
   GTP_CMD_MAX,
 };
 enum gtp_version {
diff --git a/sysroots/x86_64-linux-musl/include/linux/if_addr.h b/sysroots/x86_64-linux-musl/include/linux/if_addr.h
index 6a6b640..a225e69 100644
--- a/sysroots/x86_64-linux-musl/include/linux/if_addr.h
+++ b/sysroots/x86_64-linux-musl/include/linux/if_addr.h
@@ -39,6 +39,7 @@
   IFA_FLAGS,
   IFA_RT_PRIORITY,
   IFA_TARGET_NETNSID,
+  IFA_PROTO,
   __IFA_MAX,
 };
 #define IFA_MAX (__IFA_MAX - 1)
@@ -63,4 +64,8 @@
 };
 #define IFA_RTA(r) ((struct rtattr *) (((char *) (r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg))))
 #define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n, sizeof(struct ifaddrmsg))
+#define IFAPROT_UNSPEC 0
+#define IFAPROT_KERNEL_LO 1
+#define IFAPROT_KERNEL_RA 2
+#define IFAPROT_KERNEL_LL 3
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/if_bridge.h b/sysroots/x86_64-linux-musl/include/linux/if_bridge.h
index 2054fb3..0f08866 100644
--- a/sysroots/x86_64-linux-musl/include/linux/if_bridge.h
+++ b/sysroots/x86_64-linux-musl/include/linux/if_bridge.h
@@ -108,6 +108,7 @@
   IFLA_BRIDGE_VLAN_TUNNEL_INFO,
   IFLA_BRIDGE_MRP,
   IFLA_BRIDGE_CFM,
+  IFLA_BRIDGE_MST,
   __IFLA_BRIDGE_MAX,
 };
 #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1)
@@ -384,6 +385,19 @@
   __IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX,
 };
 #define IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX (__IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX - 1)
+enum {
+  IFLA_BRIDGE_MST_UNSPEC,
+  IFLA_BRIDGE_MST_ENTRY,
+  __IFLA_BRIDGE_MST_MAX,
+};
+#define IFLA_BRIDGE_MST_MAX (__IFLA_BRIDGE_MST_MAX - 1)
+enum {
+  IFLA_BRIDGE_MST_ENTRY_UNSPEC,
+  IFLA_BRIDGE_MST_ENTRY_MSTI,
+  IFLA_BRIDGE_MST_ENTRY_STATE,
+  __IFLA_BRIDGE_MST_ENTRY_MAX,
+};
+#define IFLA_BRIDGE_MST_ENTRY_MAX (__IFLA_BRIDGE_MST_ENTRY_MAX - 1)
 struct bridge_stp_xstats {
   __u64 transition_blk;
   __u64 transition_fwd;
@@ -460,6 +474,7 @@
   BRIDGE_VLANDB_GOPTS_MCAST_QUERIER,
   BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS,
   BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE,
+  BRIDGE_VLANDB_GOPTS_MSTI,
   __BRIDGE_VLANDB_GOPTS_MAX
 };
 #define BRIDGE_VLANDB_GOPTS_MAX (__BRIDGE_VLANDB_GOPTS_MAX - 1)
@@ -599,6 +614,7 @@
 enum br_boolopt_id {
   BR_BOOLOPT_NO_LL_LEARN,
   BR_BOOLOPT_MCAST_VLAN_SNOOPING,
+  BR_BOOLOPT_MST_ENABLE,
   BR_BOOLOPT_MAX
 };
 struct br_boolopt_multi {
diff --git a/sysroots/x86_64-linux-musl/include/linux/if_ether.h b/sysroots/x86_64-linux-musl/include/linux/if_ether.h
index 1f7f8f2..bd8e045 100644
--- a/sysroots/x86_64-linux-musl/include/linux/if_ether.h
+++ b/sysroots/x86_64-linux-musl/include/linux/if_ether.h
@@ -67,8 +67,10 @@
 #define ETH_P_LINK_CTL 0x886c
 #define ETH_P_ATMFATE 0x8884
 #define ETH_P_PAE 0x888E
+#define ETH_P_PROFINET 0x8892
 #define ETH_P_REALTEK 0x8899
 #define ETH_P_AOE 0x88A2
+#define ETH_P_ETHERCAT 0x88A4
 #define ETH_P_8021AD 0x88A8
 #define ETH_P_802_EX1 0x88B5
 #define ETH_P_PREAUTH 0x88C7
diff --git a/sysroots/x86_64-linux-musl/include/linux/if_link.h b/sysroots/x86_64-linux-musl/include/linux/if_link.h
index 7e413ae..640fa50 100644
--- a/sysroots/x86_64-linux-musl/include/linux/if_link.h
+++ b/sysroots/x86_64-linux-musl/include/linux/if_link.h
@@ -72,6 +72,17 @@
   __u64 tx_compressed;
   __u64 rx_nohandler;
 };
+struct rtnl_hw_stats64 {
+  __u64 rx_packets;
+  __u64 tx_packets;
+  __u64 rx_bytes;
+  __u64 tx_bytes;
+  __u64 rx_errors;
+  __u64 tx_errors;
+  __u64 rx_dropped;
+  __u64 tx_dropped;
+  __u64 multicast;
+};
 struct rtnl_link_ifmap {
   __u64 mem_start;
   __u64 mem_end;
@@ -289,6 +300,7 @@
   IFLA_BRPORT_MRP_IN_OPEN,
   IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT,
   IFLA_BRPORT_MCAST_EHT_HOSTS_CNT,
+  IFLA_BRPORT_LOCKED,
   __IFLA_BRPORT_MAX
 };
 #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
@@ -428,6 +440,44 @@
 };
 #define IPVLAN_F_PRIVATE 0x01
 #define IPVLAN_F_VEPA 0x02
+struct tunnel_msg {
+  __u8 family;
+  __u8 flags;
+  __u16 reserved2;
+  __u32 ifindex;
+};
+#define TUNNEL_MSG_FLAG_STATS 0x01
+#define TUNNEL_MSG_VALID_USER_FLAGS TUNNEL_MSG_FLAG_STATS
+enum {
+  VNIFILTER_ENTRY_STATS_UNSPEC,
+  VNIFILTER_ENTRY_STATS_RX_BYTES,
+  VNIFILTER_ENTRY_STATS_RX_PKTS,
+  VNIFILTER_ENTRY_STATS_RX_DROPS,
+  VNIFILTER_ENTRY_STATS_RX_ERRORS,
+  VNIFILTER_ENTRY_STATS_TX_BYTES,
+  VNIFILTER_ENTRY_STATS_TX_PKTS,
+  VNIFILTER_ENTRY_STATS_TX_DROPS,
+  VNIFILTER_ENTRY_STATS_TX_ERRORS,
+  VNIFILTER_ENTRY_STATS_PAD,
+  __VNIFILTER_ENTRY_STATS_MAX
+};
+#define VNIFILTER_ENTRY_STATS_MAX (__VNIFILTER_ENTRY_STATS_MAX - 1)
+enum {
+  VXLAN_VNIFILTER_ENTRY_UNSPEC,
+  VXLAN_VNIFILTER_ENTRY_START,
+  VXLAN_VNIFILTER_ENTRY_END,
+  VXLAN_VNIFILTER_ENTRY_GROUP,
+  VXLAN_VNIFILTER_ENTRY_GROUP6,
+  VXLAN_VNIFILTER_ENTRY_STATS,
+  __VXLAN_VNIFILTER_ENTRY_MAX
+};
+#define VXLAN_VNIFILTER_ENTRY_MAX (__VXLAN_VNIFILTER_ENTRY_MAX - 1)
+enum {
+  VXLAN_VNIFILTER_UNSPEC,
+  VXLAN_VNIFILTER_ENTRY,
+  __VXLAN_VNIFILTER_MAX
+};
+#define VXLAN_VNIFILTER_MAX (__VXLAN_VNIFILTER_MAX - 1)
 enum {
   IFLA_VXLAN_UNSPEC,
   IFLA_VXLAN_ID,
@@ -459,6 +509,7 @@
   IFLA_VXLAN_GPE,
   IFLA_VXLAN_TTL_INHERIT,
   IFLA_VXLAN_DF,
+  IFLA_VXLAN_VNIFILTER,
   __IFLA_VXLAN_MAX
 };
 #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1)
@@ -488,6 +539,7 @@
   IFLA_GENEVE_LABEL,
   IFLA_GENEVE_TTL_INHERIT,
   IFLA_GENEVE_DF,
+  IFLA_GENEVE_INNER_PROTO_INHERIT,
   __IFLA_GENEVE_MAX
 };
 #define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1)
@@ -523,6 +575,8 @@
   IFLA_GTP_FD1,
   IFLA_GTP_PDP_HASHSIZE,
   IFLA_GTP_ROLE,
+  IFLA_GTP_CREATE_SOCKETS,
+  IFLA_GTP_RESTART_COUNT,
   __IFLA_GTP_MAX,
 };
 #define IFLA_GTP_MAX (__IFLA_GTP_MAX - 1)
@@ -558,6 +612,7 @@
   IFLA_BOND_PEER_NOTIF_DELAY,
   IFLA_BOND_AD_LACP_ACTIVE,
   IFLA_BOND_MISSED_MAX,
+  IFLA_BOND_NS_IP6_TARGET,
   __IFLA_BOND_MAX,
 };
 #define IFLA_BOND_MAX (__IFLA_BOND_MAX - 1)
@@ -777,6 +832,13 @@
 #define IFLA_STATS_MAX (__IFLA_STATS_MAX - 1)
 #define IFLA_STATS_FILTER_BIT(ATTR) (1 << (ATTR - 1))
 enum {
+  IFLA_STATS_GETSET_UNSPEC,
+  IFLA_STATS_GET_FILTERS,
+  IFLA_STATS_SET_OFFLOAD_XSTATS_L3_STATS,
+  __IFLA_STATS_GETSET_MAX,
+};
+#define IFLA_STATS_GETSET_MAX (__IFLA_STATS_GETSET_MAX - 1)
+enum {
   LINK_XSTATS_TYPE_UNSPEC,
   LINK_XSTATS_TYPE_BRIDGE,
   LINK_XSTATS_TYPE_BOND,
@@ -786,9 +848,18 @@
 enum {
   IFLA_OFFLOAD_XSTATS_UNSPEC,
   IFLA_OFFLOAD_XSTATS_CPU_HIT,
+  IFLA_OFFLOAD_XSTATS_HW_S_INFO,
+  IFLA_OFFLOAD_XSTATS_L3_STATS,
   __IFLA_OFFLOAD_XSTATS_MAX
 };
 #define IFLA_OFFLOAD_XSTATS_MAX (__IFLA_OFFLOAD_XSTATS_MAX - 1)
+enum {
+  IFLA_OFFLOAD_XSTATS_HW_S_INFO_UNSPEC,
+  IFLA_OFFLOAD_XSTATS_HW_S_INFO_REQUEST,
+  IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED,
+  __IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX,
+};
+#define IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX (__IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX - 1)
 #define XDP_FLAGS_UPDATE_IF_NOEXIST (1U << 0)
 #define XDP_FLAGS_SKB_MODE (1U << 1)
 #define XDP_FLAGS_DRV_MODE (1U << 2)
diff --git a/sysroots/x86_64-linux-musl/include/linux/if_tunnel.h b/sysroots/x86_64-linux-musl/include/linux/if_tunnel.h
index 8e1847f..01c2dc9 100644
--- a/sysroots/x86_64-linux-musl/include/linux/if_tunnel.h
+++ b/sysroots/x86_64-linux-musl/include/linux/if_tunnel.h
@@ -169,5 +169,6 @@
 #define TUNNEL_VXLAN_OPT __cpu_to_be16(0x1000)
 #define TUNNEL_NOCACHE __cpu_to_be16(0x2000)
 #define TUNNEL_ERSPAN_OPT __cpu_to_be16(0x4000)
-#define TUNNEL_OPTIONS_PRESENT (TUNNEL_GENEVE_OPT | TUNNEL_VXLAN_OPT | TUNNEL_ERSPAN_OPT)
+#define TUNNEL_GTP_OPT __cpu_to_be16(0x8000)
+#define TUNNEL_OPTIONS_PRESENT (TUNNEL_GENEVE_OPT | TUNNEL_VXLAN_OPT | TUNNEL_ERSPAN_OPT | TUNNEL_GTP_OPT)
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/iio/types.h b/sysroots/x86_64-linux-musl/include/linux/iio/types.h
index 22409a7..aa66d50 100644
--- a/sysroots/x86_64-linux-musl/include/linux/iio/types.h
+++ b/sysroots/x86_64-linux-musl/include/linux/iio/types.h
@@ -109,6 +109,7 @@
   IIO_EV_TYPE_THRESH_ADAPTIVE,
   IIO_EV_TYPE_MAG_ADAPTIVE,
   IIO_EV_TYPE_CHANGE,
+  IIO_EV_TYPE_MAG_REFERENCED,
 };
 enum iio_event_direction {
   IIO_EV_DIR_EITHER,
diff --git a/sysroots/x86_64-linux-musl/include/linux/input-event-codes.h b/sysroots/x86_64-linux-musl/include/linux/input-event-codes.h
index 34cd23c..4b251df 100644
--- a/sysroots/x86_64-linux-musl/include/linux/input-event-codes.h
+++ b/sysroots/x86_64-linux-musl/include/linux/input-event-codes.h
@@ -580,6 +580,21 @@
 #define KEY_ONSCREEN_KEYBOARD 0x278
 #define KEY_PRIVACY_SCREEN_TOGGLE 0x279
 #define KEY_SELECTIVE_SCREENSHOT 0x27a
+#define KEY_NEXT_ELEMENT 0x27b
+#define KEY_PREVIOUS_ELEMENT 0x27c
+#define KEY_AUTOPILOT_ENGAGE_TOGGLE 0x27d
+#define KEY_MARK_WAYPOINT 0x27e
+#define KEY_SOS 0x27f
+#define KEY_NAV_CHART 0x280
+#define KEY_FISHING_CHART 0x281
+#define KEY_SINGLE_RANGE_RADAR 0x282
+#define KEY_DUAL_RANGE_RADAR 0x283
+#define KEY_RADAR_OVERLAY 0x284
+#define KEY_TRADITIONAL_SONAR 0x285
+#define KEY_CLEARVU_SONAR 0x286
+#define KEY_SIDEVU_SONAR 0x287
+#define KEY_NAV_INFO 0x288
+#define KEY_BRIGHTNESS_MENU 0x289
 #define KEY_MACRO1 0x290
 #define KEY_MACRO2 0x291
 #define KEY_MACRO3 0x292
diff --git a/sysroots/x86_64-linux-musl/include/linux/io_uring.h b/sysroots/x86_64-linux-musl/include/linux/io_uring.h
index 96944f8..2f599aa 100644
--- a/sysroots/x86_64-linux-musl/include/linux/io_uring.h
+++ b/sysroots/x86_64-linux-musl/include/linux/io_uring.h
@@ -87,6 +87,7 @@
 #define IORING_SETUP_CLAMP (1U << 4)
 #define IORING_SETUP_ATTACH_WQ (1U << 5)
 #define IORING_SETUP_R_DISABLED (1U << 6)
+#define IORING_SETUP_SUBMIT_ALL (1U << 7)
 enum {
   IORING_OP_NOP,
   IORING_OP_READV,
@@ -128,6 +129,7 @@
   IORING_OP_MKDIRAT,
   IORING_OP_SYMLINKAT,
   IORING_OP_LINKAT,
+  IORING_OP_MSG_RING,
   IORING_OP_LAST,
 };
 #define IORING_FSYNC_DATASYNC (1U << 0)
@@ -185,6 +187,7 @@
 #define IORING_ENTER_SQ_WAKEUP (1U << 1)
 #define IORING_ENTER_SQ_WAIT (1U << 2)
 #define IORING_ENTER_EXT_ARG (1U << 3)
+#define IORING_ENTER_REGISTERED_RING (1U << 4)
 struct io_uring_params {
   __u32 sq_entries;
   __u32 cq_entries;
@@ -209,6 +212,7 @@
 #define IORING_FEAT_NATIVE_WORKERS (1U << 9)
 #define IORING_FEAT_RSRC_TAGS (1U << 10)
 #define IORING_FEAT_CQE_SKIP (1U << 11)
+#define IORING_FEAT_LINKED_FILE (1U << 12)
 enum {
   IORING_REGISTER_BUFFERS = 0,
   IORING_UNREGISTER_BUFFERS = 1,
@@ -230,6 +234,8 @@
   IORING_REGISTER_IOWQ_AFF = 17,
   IORING_UNREGISTER_IOWQ_AFF = 18,
   IORING_REGISTER_IOWQ_MAX_WORKERS = 19,
+  IORING_REGISTER_RING_FDS = 20,
+  IORING_UNREGISTER_RING_FDS = 21,
   IORING_REGISTER_LAST
 };
 enum {
diff --git a/sysroots/x86_64-linux-musl/include/linux/ioam6_iptunnel.h b/sysroots/x86_64-linux-musl/include/linux/ioam6_iptunnel.h
index 7426225..ec1a6a8 100644
--- a/sysroots/x86_64-linux-musl/include/linux/ioam6_iptunnel.h
+++ b/sysroots/x86_64-linux-musl/include/linux/ioam6_iptunnel.h
@@ -32,6 +32,10 @@
   IOAM6_IPTUNNEL_MODE,
   IOAM6_IPTUNNEL_DST,
   IOAM6_IPTUNNEL_TRACE,
+#define IOAM6_IPTUNNEL_FREQ_MIN 1
+#define IOAM6_IPTUNNEL_FREQ_MAX 1000000
+  IOAM6_IPTUNNEL_FREQ_K,
+  IOAM6_IPTUNNEL_FREQ_N,
   __IOAM6_IPTUNNEL_MAX,
 };
 #define IOAM6_IPTUNNEL_MAX (__IOAM6_IPTUNNEL_MAX - 1)
diff --git a/sysroots/x86_64-linux-musl/include/linux/iommu.h b/sysroots/x86_64-linux-musl/include/linux/iommu.h
index 0a0af92..0304a32 100644
--- a/sysroots/x86_64-linux-musl/include/linux/iommu.h
+++ b/sysroots/x86_64-linux-musl/include/linux/iommu.h
@@ -85,76 +85,4 @@
   __u32 grpid;
   __u32 code;
 };
-enum iommu_inv_granularity {
-  IOMMU_INV_GRANU_DOMAIN,
-  IOMMU_INV_GRANU_PASID,
-  IOMMU_INV_GRANU_ADDR,
-  IOMMU_INV_GRANU_NR,
-};
-struct iommu_inv_addr_info {
-#define IOMMU_INV_ADDR_FLAGS_PASID (1 << 0)
-#define IOMMU_INV_ADDR_FLAGS_ARCHID (1 << 1)
-#define IOMMU_INV_ADDR_FLAGS_LEAF (1 << 2)
-  __u32 flags;
-  __u32 archid;
-  __u64 pasid;
-  __u64 addr;
-  __u64 granule_size;
-  __u64 nb_granules;
-};
-struct iommu_inv_pasid_info {
-#define IOMMU_INV_PASID_FLAGS_PASID (1 << 0)
-#define IOMMU_INV_PASID_FLAGS_ARCHID (1 << 1)
-  __u32 flags;
-  __u32 archid;
-  __u64 pasid;
-};
-struct iommu_cache_invalidate_info {
-  __u32 argsz;
-#define IOMMU_CACHE_INVALIDATE_INFO_VERSION_1 1
-  __u32 version;
-#define IOMMU_CACHE_INV_TYPE_IOTLB (1 << 0)
-#define IOMMU_CACHE_INV_TYPE_DEV_IOTLB (1 << 1)
-#define IOMMU_CACHE_INV_TYPE_PASID (1 << 2)
-#define IOMMU_CACHE_INV_TYPE_NR (3)
-  __u8 cache;
-  __u8 granularity;
-  __u8 padding[6];
-  union {
-    struct iommu_inv_pasid_info pasid_info;
-    struct iommu_inv_addr_info addr_info;
-  } granu;
-};
-struct iommu_gpasid_bind_data_vtd {
-#define IOMMU_SVA_VTD_GPASID_SRE (1 << 0)
-#define IOMMU_SVA_VTD_GPASID_EAFE (1 << 1)
-#define IOMMU_SVA_VTD_GPASID_PCD (1 << 2)
-#define IOMMU_SVA_VTD_GPASID_PWT (1 << 3)
-#define IOMMU_SVA_VTD_GPASID_EMTE (1 << 4)
-#define IOMMU_SVA_VTD_GPASID_CD (1 << 5)
-#define IOMMU_SVA_VTD_GPASID_WPE (1 << 6)
-#define IOMMU_SVA_VTD_GPASID_LAST (1 << 7)
-  __u64 flags;
-  __u32 pat;
-  __u32 emt;
-};
-#define IOMMU_SVA_VTD_GPASID_MTS_MASK (IOMMU_SVA_VTD_GPASID_CD | IOMMU_SVA_VTD_GPASID_EMTE | IOMMU_SVA_VTD_GPASID_PCD | IOMMU_SVA_VTD_GPASID_PWT)
-struct iommu_gpasid_bind_data {
-  __u32 argsz;
-#define IOMMU_GPASID_BIND_VERSION_1 1
-  __u32 version;
-#define IOMMU_PASID_FORMAT_INTEL_VTD 1
-#define IOMMU_PASID_FORMAT_LAST 2
-  __u32 format;
-  __u32 addr_width;
-#define IOMMU_SVA_GPASID_VAL (1 << 0)
-  __u64 flags;
-  __u64 gpgd;
-  __u64 hpasid;
-  __u64 gpasid;
-  __u8 padding[8];
-  union {
-    struct iommu_gpasid_bind_data_vtd vtd;
-  } vendor;
-};
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/kexec.h b/sysroots/x86_64-linux-musl/include/linux/kexec.h
index 2e3bd0c..7dbc87e 100644
--- a/sysroots/x86_64-linux-musl/include/linux/kexec.h
+++ b/sysroots/x86_64-linux-musl/include/linux/kexec.h
@@ -43,8 +43,8 @@
 #define KEXEC_SEGMENT_MAX 16
 struct kexec_segment {
   const void * buf;
-  size_t bufsz;
+  __kernel_size_t bufsz;
   const void * mem;
-  size_t memsz;
+  __kernel_size_t memsz;
 };
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/kfd_ioctl.h b/sysroots/x86_64-linux-musl/include/linux/kfd_ioctl.h
index c52ac64..8ec47f4 100644
--- a/sysroots/x86_64-linux-musl/include/linux/kfd_ioctl.h
+++ b/sysroots/x86_64-linux-musl/include/linux/kfd_ioctl.h
@@ -21,7 +21,7 @@
 #include <drm/drm.h>
 #include <linux/ioctl.h>
 #define KFD_IOCTL_MAJOR_VERSION 1
-#define KFD_IOCTL_MINOR_VERSION 6
+#define KFD_IOCTL_MINOR_VERSION 8
 struct kfd_ioctl_get_version_args {
   __u32 major_version;
   __u32 minor_version;
@@ -132,6 +132,7 @@
   __u32 gpu_id;
   __u32 buf_size_in_bytes;
 };
+#define KFD_INVALID_FD 0xffffffff
 #define KFD_IOC_EVENT_SIGNAL 0
 #define KFD_IOC_EVENT_NODECHANGE 1
 #define KFD_IOC_EVENT_DEVICESTATECHANGE 2
@@ -296,10 +297,45 @@
   KFD_SMI_EVENT_GPU_POST_RESET = 4,
 };
 #define KFD_SMI_EVENT_MASK_FROM_INDEX(i) (1ULL << ((i) - 1))
+#define KFD_SMI_EVENT_MSG_SIZE 96
 struct kfd_ioctl_smi_events_args {
   __u32 gpuid;
   __u32 anon_fd;
 };
+enum kfd_criu_op {
+  KFD_CRIU_OP_PROCESS_INFO,
+  KFD_CRIU_OP_CHECKPOINT,
+  KFD_CRIU_OP_UNPAUSE,
+  KFD_CRIU_OP_RESTORE,
+  KFD_CRIU_OP_RESUME,
+};
+struct kfd_ioctl_criu_args {
+  __u64 devices;
+  __u64 bos;
+  __u64 priv_data;
+  __u64 priv_data_size;
+  __u32 num_devices;
+  __u32 num_bos;
+  __u32 num_objects;
+  __u32 pid;
+  __u32 op;
+};
+struct kfd_criu_device_bucket {
+  __u32 user_gpu_id;
+  __u32 actual_gpu_id;
+  __u32 drm_fd;
+  __u32 pad;
+};
+struct kfd_criu_bo_bucket {
+  __u64 addr;
+  __u64 size;
+  __u64 offset;
+  __u64 restored_offset;
+  __u32 gpu_id;
+  __u32 alloc_flags;
+  __u32 dmabuf_fd;
+  __u32 pad;
+};
 enum kfd_mmio_remap {
   KFD_MMIO_REMAP_HDP_MEM_FLUSH_CNTL = 0,
   KFD_MMIO_REMAP_HDP_REG_FLUSH_CNTL = 4,
@@ -337,7 +373,7 @@
   __u64 size;
   __u32 op;
   __u32 nattr;
-  struct kfd_ioctl_svm_attribute attrs[0];
+  struct kfd_ioctl_svm_attribute attrs[];
 };
 struct kfd_ioctl_set_xnack_mode_args {
   __s32 xnack_enabled;
@@ -359,10 +395,10 @@
 #define AMDKFD_IOC_SET_EVENT AMDKFD_IOW(0x0A, struct kfd_ioctl_set_event_args)
 #define AMDKFD_IOC_RESET_EVENT AMDKFD_IOW(0x0B, struct kfd_ioctl_reset_event_args)
 #define AMDKFD_IOC_WAIT_EVENTS AMDKFD_IOWR(0x0C, struct kfd_ioctl_wait_events_args)
-#define AMDKFD_IOC_DBG_REGISTER AMDKFD_IOW(0x0D, struct kfd_ioctl_dbg_register_args)
-#define AMDKFD_IOC_DBG_UNREGISTER AMDKFD_IOW(0x0E, struct kfd_ioctl_dbg_unregister_args)
-#define AMDKFD_IOC_DBG_ADDRESS_WATCH AMDKFD_IOW(0x0F, struct kfd_ioctl_dbg_address_watch_args)
-#define AMDKFD_IOC_DBG_WAVE_CONTROL AMDKFD_IOW(0x10, struct kfd_ioctl_dbg_wave_control_args)
+#define AMDKFD_IOC_DBG_REGISTER_DEPRECATED AMDKFD_IOW(0x0D, struct kfd_ioctl_dbg_register_args)
+#define AMDKFD_IOC_DBG_UNREGISTER_DEPRECATED AMDKFD_IOW(0x0E, struct kfd_ioctl_dbg_unregister_args)
+#define AMDKFD_IOC_DBG_ADDRESS_WATCH_DEPRECATED AMDKFD_IOW(0x0F, struct kfd_ioctl_dbg_address_watch_args)
+#define AMDKFD_IOC_DBG_WAVE_CONTROL_DEPRECATED AMDKFD_IOW(0x10, struct kfd_ioctl_dbg_wave_control_args)
 #define AMDKFD_IOC_SET_SCRATCH_BACKING_VA AMDKFD_IOWR(0x11, struct kfd_ioctl_set_scratch_backing_va_args)
 #define AMDKFD_IOC_GET_TILE_CONFIG AMDKFD_IOWR(0x12, struct kfd_ioctl_get_tile_config_args)
 #define AMDKFD_IOC_SET_TRAP_HANDLER AMDKFD_IOW(0x13, struct kfd_ioctl_set_trap_handler_args)
@@ -380,6 +416,7 @@
 #define AMDKFD_IOC_SMI_EVENTS AMDKFD_IOWR(0x1F, struct kfd_ioctl_smi_events_args)
 #define AMDKFD_IOC_SVM AMDKFD_IOWR(0x20, struct kfd_ioctl_svm_args)
 #define AMDKFD_IOC_SET_XNACK_MODE AMDKFD_IOWR(0x21, struct kfd_ioctl_set_xnack_mode_args)
+#define AMDKFD_IOC_CRIU_OP AMDKFD_IOWR(0x22, struct kfd_ioctl_criu_args)
 #define AMDKFD_COMMAND_START 0x01
-#define AMDKFD_COMMAND_END 0x22
+#define AMDKFD_COMMAND_END 0x23
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/kvm.h b/sysroots/x86_64-linux-musl/include/linux/kvm.h
index 1cf7182..5cc9905 100644
--- a/sysroots/x86_64-linux-musl/include/linux/kvm.h
+++ b/sysroots/x86_64-linux-musl/include/linux/kvm.h
@@ -337,7 +337,11 @@
 #define KVM_SYSTEM_EVENT_RESET 2
 #define KVM_SYSTEM_EVENT_CRASH 3
       __u32 type;
-      __u64 flags;
+      __u32 ndata;
+      union {
+        __u64 flags;
+        __u64 data[16];
+      };
     } system_event;
     struct {
       __u64 addr;
@@ -419,7 +423,10 @@
   __u32 op;
   __u64 buf;
   union {
-    __u8 ar;
+    struct {
+      __u8 ar;
+      __u8 key;
+    };
     __u32 sida_offset;
     __u8 reserved[32];
   };
@@ -428,8 +435,11 @@
 #define KVM_S390_MEMOP_LOGICAL_WRITE 1
 #define KVM_S390_MEMOP_SIDA_READ 2
 #define KVM_S390_MEMOP_SIDA_WRITE 3
+#define KVM_S390_MEMOP_ABSOLUTE_READ 4
+#define KVM_S390_MEMOP_ABSOLUTE_WRITE 5
 #define KVM_S390_MEMOP_F_CHECK_ONLY (1ULL << 0)
 #define KVM_S390_MEMOP_F_INJECT_EXCEPTION (1ULL << 1)
+#define KVM_S390_MEMOP_F_SKEY_PROTECTION (1ULL << 2)
 struct kvm_interrupt {
   __u32 irq;
 };
@@ -890,6 +900,10 @@
 #define KVM_CAP_XSAVE2 208
 #define KVM_CAP_SYS_ATTRIBUTES 209
 #define KVM_CAP_PPC_AIL_MODE_3 210
+#define KVM_CAP_S390_MEM_OP_EXTENSION 211
+#define KVM_CAP_PMU_CAPABILITY 212
+#define KVM_CAP_DISABLE_QUIRKS2 213
+#define KVM_CAP_SYSTEM_EVENT_DATA 215
 #ifdef KVM_CAP_IRQ_ROUTING
 struct kvm_irq_routing_irqchip {
   __u32 irqchip;
@@ -1480,6 +1494,7 @@
 };
 #define KVM_BUS_LOCK_DETECTION_OFF (1 << 0)
 #define KVM_BUS_LOCK_DETECTION_EXIT (1 << 1)
+#define KVM_PMU_CAP_DISABLE (1 << 0)
 struct kvm_stats_header {
   __u32 flags;
   __u32 name_size;
diff --git a/sysroots/x86_64-linux-musl/include/linux/lirc.h b/sysroots/x86_64-linux-musl/include/linux/lirc.h
index a0ac24a..ea45506 100644
--- a/sysroots/x86_64-linux-musl/include/linux/lirc.h
+++ b/sysroots/x86_64-linux-musl/include/linux/lirc.h
@@ -26,18 +26,21 @@
 #define LIRC_MODE2_PULSE 0x01000000
 #define LIRC_MODE2_FREQUENCY 0x02000000
 #define LIRC_MODE2_TIMEOUT 0x03000000
+#define LIRC_MODE2_OVERFLOW 0x04000000
 #define LIRC_VALUE_MASK 0x00FFFFFF
 #define LIRC_MODE2_MASK 0xFF000000
 #define LIRC_SPACE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
 #define LIRC_PULSE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
 #define LIRC_FREQUENCY(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
 #define LIRC_TIMEOUT(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
+#define LIRC_OVERFLOW(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_OVERFLOW)
 #define LIRC_VALUE(val) ((val) & LIRC_VALUE_MASK)
 #define LIRC_MODE2(val) ((val) & LIRC_MODE2_MASK)
 #define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
 #define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
 #define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
 #define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
+#define LIRC_IS_OVERFLOW(val) (LIRC_MODE2(val) == LIRC_MODE2_OVERFLOW)
 #define lirc_t int
 #define LIRC_MODE2SEND(x) (x)
 #define LIRC_SEND2MODE(x) (x)
@@ -63,17 +66,13 @@
 #define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
 #define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
 #define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16)
-#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16)
-#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000
 #define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000
 #define LIRC_CAN_GET_REC_RESOLUTION 0x20000000
 #define LIRC_CAN_SET_REC_TIMEOUT 0x10000000
-#define LIRC_CAN_SET_REC_FILTER 0x08000000
 #define LIRC_CAN_MEASURE_CARRIER 0x02000000
 #define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000
 #define LIRC_CAN_SEND(x) ((x) & LIRC_CAN_SEND_MASK)
 #define LIRC_CAN_REC(x) ((x) & LIRC_CAN_REC_MASK)
-#define LIRC_CAN_NOTIFY_DECODE 0x01000000
 #define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32)
 #define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32)
 #define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32)
diff --git a/sysroots/x86_64-linux-musl/include/linux/mctp.h b/sysroots/x86_64-linux-musl/include/linux/mctp.h
index 21a9a14..f02c12f 100644
--- a/sysroots/x86_64-linux-musl/include/linux/mctp.h
+++ b/sysroots/x86_64-linux-musl/include/linux/mctp.h
@@ -46,5 +46,13 @@
 #define MCTP_ADDR_ANY 0xff
 #define MCTP_TAG_MASK 0x07
 #define MCTP_TAG_OWNER 0x08
+#define MCTP_TAG_PREALLOC 0x10
 #define MCTP_OPT_ADDR_EXT 1
+#define SIOCMCTPALLOCTAG (SIOCPROTOPRIVATE + 0)
+#define SIOCMCTPDROPTAG (SIOCPROTOPRIVATE + 1)
+struct mctp_ioc_tag_ctl {
+  mctp_eid_t peer_addr;
+  __u8 tag;
+  __u16 flags;
+};
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/mptcp.h b/sysroots/x86_64-linux-musl/include/linux/mptcp.h
index 67b0ce3..7b3acd5 100644
--- a/sysroots/x86_64-linux-musl/include/linux/mptcp.h
+++ b/sysroots/x86_64-linux-musl/include/linux/mptcp.h
@@ -77,6 +77,7 @@
 #define MPTCP_PM_ADDR_FLAG_SUBFLOW (1 << 1)
 #define MPTCP_PM_ADDR_FLAG_BACKUP (1 << 2)
 #define MPTCP_PM_ADDR_FLAG_FULLMESH (1 << 3)
+#define MPTCP_PM_ADDR_FLAG_IMPLICIT (1 << 4)
 enum {
   MPTCP_PM_CMD_UNSPEC,
   MPTCP_PM_CMD_ADD_ADDR,
diff --git a/sysroots/x86_64-linux-musl/include/linux/mroute6.h b/sysroots/x86_64-linux-musl/include/linux/mroute6.h
index c73765c..68480de 100644
--- a/sysroots/x86_64-linux-musl/include/linux/mroute6.h
+++ b/sysroots/x86_64-linux-musl/include/linux/mroute6.h
@@ -93,6 +93,7 @@
 #define MRT6MSG_NOCACHE 1
 #define MRT6MSG_WRONGMIF 2
 #define MRT6MSG_WHOLEPKT 3
+#define MRT6MSG_WRMIFWHOLE 4
   __u8 im6_mbz;
   __u8 im6_msgtype;
   __u16 im6_mif;
diff --git a/sysroots/x86_64-linux-musl/include/linux/ndctl.h b/sysroots/x86_64-linux-musl/include/linux/ndctl.h
index 53f8ba4..0fd3ac4 100644
--- a/sysroots/x86_64-linux-musl/include/linux/ndctl.h
+++ b/sysroots/x86_64-linux-musl/include/linux/ndctl.h
@@ -129,7 +129,6 @@
 #define ND_DEVICE_REGION_BLK 3
 #define ND_DEVICE_NAMESPACE_IO 4
 #define ND_DEVICE_NAMESPACE_PMEM 5
-#define ND_DEVICE_NAMESPACE_BLK 6
 #define ND_DEVICE_DAX_PMEM 7
 enum nd_driver_flags {
   ND_DRIVER_DIMM = 1 << ND_DEVICE_DIMM,
@@ -137,7 +136,6 @@
   ND_DRIVER_REGION_BLK = 1 << ND_DEVICE_REGION_BLK,
   ND_DRIVER_NAMESPACE_IO = 1 << ND_DEVICE_NAMESPACE_IO,
   ND_DRIVER_NAMESPACE_PMEM = 1 << ND_DEVICE_NAMESPACE_PMEM,
-  ND_DRIVER_NAMESPACE_BLK = 1 << ND_DEVICE_NAMESPACE_BLK,
   ND_DRIVER_DAX_PMEM = 1 << ND_DEVICE_DAX_PMEM,
 };
 enum ars_masks {
diff --git a/sysroots/x86_64-linux-musl/include/linux/net_dropmon.h b/sysroots/x86_64-linux-musl/include/linux/net_dropmon.h
index 01b76cb..35f70a5 100644
--- a/sysroots/x86_64-linux-musl/include/linux/net_dropmon.h
+++ b/sysroots/x86_64-linux-musl/include/linux/net_dropmon.h
@@ -87,6 +87,7 @@
   NET_DM_ATTR_SW_DROPS,
   NET_DM_ATTR_HW_DROPS,
   NET_DM_ATTR_FLOW_ACTION_COOKIE,
+  NET_DM_ATTR_REASON,
   __NET_DM_ATTR_MAX,
   NET_DM_ATTR_MAX = __NET_DM_ATTR_MAX - 1
 };
diff --git a/sysroots/x86_64-linux-musl/include/linux/netfilter/nfnetlink_queue.h b/sysroots/x86_64-linux-musl/include/linux/netfilter/nfnetlink_queue.h
index 75fa359..d100dec 100644
--- a/sysroots/x86_64-linux-musl/include/linux/netfilter/nfnetlink_queue.h
+++ b/sysroots/x86_64-linux-musl/include/linux/netfilter/nfnetlink_queue.h
@@ -70,6 +70,7 @@
   NFQA_SECCTX,
   NFQA_VLAN,
   NFQA_L2HDR,
+  NFQA_PRIORITY,
   __NFQA_MAX
 };
 #define NFQA_MAX (__NFQA_MAX - 1)
diff --git a/sysroots/x86_64-linux-musl/include/linux/nfs4.h b/sysroots/x86_64-linux-musl/include/linux/nfs4.h
index 9d614ce..ef860e2 100644
--- a/sysroots/x86_64-linux-musl/include/linux/nfs4.h
+++ b/sysroots/x86_64-linux-musl/include/linux/nfs4.h
@@ -45,6 +45,7 @@
 #define NFS4_FH_VOL_RENAME 0x0008
 #define NFS4_OPEN_RESULT_CONFIRM 0x0002
 #define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
+#define NFS4_OPEN_RESULT_PRESERVE_UNLINKED 0x0008
 #define NFS4_OPEN_RESULT_MAY_NOTIFY_LOCK 0x0020
 #define NFS4_SHARE_ACCESS_MASK 0x000F
 #define NFS4_SHARE_ACCESS_READ 0x0001
diff --git a/sysroots/x86_64-linux-musl/include/linux/nl80211.h b/sysroots/x86_64-linux-musl/include/linux/nl80211.h
index e902178..61de391 100644
--- a/sysroots/x86_64-linux-musl/include/linux/nl80211.h
+++ b/sysroots/x86_64-linux-musl/include/linux/nl80211.h
@@ -511,6 +511,7 @@
   NL80211_ATTR_MBSSID_ELEMS,
   NL80211_ATTR_RADAR_BACKGROUND,
   NL80211_ATTR_AP_SETTINGS_FLAGS,
+  NL80211_ATTR_EHT_CAPABILITY,
   __NL80211_ATTR_AFTER_LAST,
   NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST,
   NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
@@ -555,6 +556,8 @@
 #define NL80211_HE_MAX_CAPABILITY_LEN 54
 #define NL80211_MAX_NR_CIPHER_SUITES 5
 #define NL80211_MAX_NR_AKM_SUITES 2
+#define NL80211_EHT_MIN_CAPABILITY_LEN 13
+#define NL80211_EHT_MAX_CAPABILITY_LEN 51
 #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10
 #define NL80211_SCAN_RSSI_THOLD_OFF - 300
 #define NL80211_CQM_TXE_MAX_INTVL 1800
@@ -616,6 +619,29 @@
   NL80211_RATE_INFO_HE_RU_ALLOC_996,
   NL80211_RATE_INFO_HE_RU_ALLOC_2x996,
 };
+enum nl80211_eht_gi {
+  NL80211_RATE_INFO_EHT_GI_0_8,
+  NL80211_RATE_INFO_EHT_GI_1_6,
+  NL80211_RATE_INFO_EHT_GI_3_2,
+};
+enum nl80211_eht_ru_alloc {
+  NL80211_RATE_INFO_EHT_RU_ALLOC_26,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_52,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_52P26,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_106,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_106P26,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_242,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_484,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_484P242,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_996,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_996P484,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_2x996,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_3x996,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484,
+  NL80211_RATE_INFO_EHT_RU_ALLOC_4x996,
+};
 enum nl80211_rate_info {
   __NL80211_RATE_INFO_INVALID,
   NL80211_RATE_INFO_BITRATE,
@@ -635,6 +661,11 @@
   NL80211_RATE_INFO_HE_GI,
   NL80211_RATE_INFO_HE_DCM,
   NL80211_RATE_INFO_HE_RU_ALLOC,
+  NL80211_RATE_INFO_320_MHZ_WIDTH,
+  NL80211_RATE_INFO_EHT_MCS,
+  NL80211_RATE_INFO_EHT_NSS,
+  NL80211_RATE_INFO_EHT_GI,
+  NL80211_RATE_INFO_EHT_RU_ALLOC,
   __NL80211_RATE_INFO_AFTER_LAST,
   NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
 };
@@ -754,6 +785,10 @@
   NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
   NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
   NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS,
+  NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC,
+  NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY,
+  NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET,
+  NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE,
   __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
   NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1
 };
@@ -810,6 +845,8 @@
   NL80211_FREQUENCY_ATTR_4MHZ,
   NL80211_FREQUENCY_ATTR_8MHZ,
   NL80211_FREQUENCY_ATTR_16MHZ,
+  NL80211_FREQUENCY_ATTR_NO_320MHZ,
+  NL80211_FREQUENCY_ATTR_NO_EHT,
   __NL80211_FREQUENCY_ATTR_AFTER_LAST,
   NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
 };
@@ -878,6 +915,7 @@
   NL80211_RRF_NO_80MHZ = 1 << 15,
   NL80211_RRF_NO_160MHZ = 1 << 16,
   NL80211_RRF_NO_HE = 1 << 17,
+  NL80211_RRF_NO_320MHZ = 1 << 18,
 };
 #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
 #define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR
@@ -1033,6 +1071,7 @@
   NL80211_CHAN_WIDTH_4,
   NL80211_CHAN_WIDTH_8,
   NL80211_CHAN_WIDTH_16,
+  NL80211_CHAN_WIDTH_320,
 };
 enum nl80211_bss_scan_width {
   NL80211_BSS_CHAN_WIDTH_20,
diff --git a/sysroots/x86_64-linux-musl/include/linux/nvme_ioctl.h b/sysroots/x86_64-linux-musl/include/linux/nvme_ioctl.h
index f2a328e..a2f9914 100644
--- a/sysroots/x86_64-linux-musl/include/linux/nvme_ioctl.h
+++ b/sysroots/x86_64-linux-musl/include/linux/nvme_ioctl.h
@@ -63,7 +63,10 @@
   __u64 metadata;
   __u64 addr;
   __u32 metadata_len;
-  __u32 data_len;
+  union {
+    __u32 data_len;
+    __u32 vec_cnt;
+  };
   __u32 cdw10;
   __u32 cdw11;
   __u32 cdw12;
@@ -84,4 +87,5 @@
 #define NVME_IOCTL_RESCAN _IO('N', 0x46)
 #define NVME_IOCTL_ADMIN64_CMD _IOWR('N', 0x47, struct nvme_passthru_cmd64)
 #define NVME_IOCTL_IO64_CMD _IOWR('N', 0x48, struct nvme_passthru_cmd64)
+#define NVME_IOCTL_IO64_CMD_VEC _IOWR('N', 0x49, struct nvme_passthru_cmd64)
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/omap3isp.h b/sysroots/x86_64-linux-musl/include/linux/omap3isp.h
index d2eceb7..53345e3 100644
--- a/sysroots/x86_64-linux-musl/include/linux/omap3isp.h
+++ b/sysroots/x86_64-linux-musl/include/linux/omap3isp.h
@@ -89,10 +89,11 @@
 struct omap3isp_stat_data {
   struct timeval ts;
   void __user * buf;
-  __u32 buf_size;
+  __struct_group(, frame,, __u32 buf_size;
   __u16 frame_number;
   __u16 cur_frame;
   __u16 config_counter;
+ );
 };
 #define OMAP3ISP_HIST_BINS_32 0
 #define OMAP3ISP_HIST_BINS_64 1
diff --git a/sysroots/x86_64-linux-musl/include/linux/openvswitch.h b/sysroots/x86_64-linux-musl/include/linux/openvswitch.h
index 1f8ae17..c7d719c 100644
--- a/sysroots/x86_64-linux-musl/include/linux/openvswitch.h
+++ b/sysroots/x86_64-linux-musl/include/linux/openvswitch.h
@@ -190,6 +190,10 @@
   OVS_KEY_ATTR_CT_ORIG_TUPLE_IPV4,
   OVS_KEY_ATTR_CT_ORIG_TUPLE_IPV6,
   OVS_KEY_ATTR_NSH,
+  OVS_KEY_ATTR_PACKET_TYPE,
+  OVS_KEY_ATTR_ND_EXTENSIONS,
+  OVS_KEY_ATTR_TUNNEL_INFO,
+  OVS_KEY_ATTR_IPV6_EXTHDRS,
   __OVS_KEY_ATTR_MAX
 };
 #define OVS_KEY_ATTR_MAX (__OVS_KEY_ATTR_MAX - 1)
@@ -245,6 +249,9 @@
   __u8 ipv6_hlimit;
   __u8 ipv6_frag;
 };
+struct ovs_key_ipv6_exthdrs {
+  __u16 hdrs;
+};
 struct ovs_key_tcp {
   __be16 tcp_src;
   __be16 tcp_dst;
diff --git a/sysroots/x86_64-linux-musl/include/linux/perf_event.h b/sysroots/x86_64-linux-musl/include/linux/perf_event.h
index b022586..bcc4e97 100644
--- a/sysroots/x86_64-linux-musl/include/linux/perf_event.h
+++ b/sysroots/x86_64-linux-musl/include/linux/perf_event.h
@@ -165,6 +165,8 @@
   PERF_BR_SYSRET = 8,
   PERF_BR_COND_CALL = 9,
   PERF_BR_COND_RET = 10,
+  PERF_BR_ERET = 11,
+  PERF_BR_IRQ = 12,
   PERF_BR_MAX,
 };
 #define PERF_SAMPLE_BRANCH_PLM_ALL (PERF_SAMPLE_BRANCH_USER | PERF_SAMPLE_BRANCH_KERNEL | PERF_SAMPLE_BRANCH_HV)
diff --git a/sysroots/x86_64-linux-musl/include/linux/pkt_cls.h b/sysroots/x86_64-linux-musl/include/linux/pkt_cls.h
index 9fd89e0..58d8205 100644
--- a/sysroots/x86_64-linux-musl/include/linux/pkt_cls.h
+++ b/sysroots/x86_64-linux-musl/include/linux/pkt_cls.h
@@ -476,6 +476,7 @@
   TCA_FLOWER_KEY_ENC_OPTS_GENEVE,
   TCA_FLOWER_KEY_ENC_OPTS_VXLAN,
   TCA_FLOWER_KEY_ENC_OPTS_ERSPAN,
+  TCA_FLOWER_KEY_ENC_OPTS_GTP,
   __TCA_FLOWER_KEY_ENC_OPTS_MAX,
 };
 #define TCA_FLOWER_KEY_ENC_OPTS_MAX (__TCA_FLOWER_KEY_ENC_OPTS_MAX - 1)
@@ -503,6 +504,13 @@
 };
 #define TCA_FLOWER_KEY_ENC_OPT_ERSPAN_MAX (__TCA_FLOWER_KEY_ENC_OPT_ERSPAN_MAX - 1)
 enum {
+  TCA_FLOWER_KEY_ENC_OPT_GTP_UNSPEC,
+  TCA_FLOWER_KEY_ENC_OPT_GTP_PDU_TYPE,
+  TCA_FLOWER_KEY_ENC_OPT_GTP_QFI,
+  __TCA_FLOWER_KEY_ENC_OPT_GTP_MAX,
+};
+#define TCA_FLOWER_KEY_ENC_OPT_GTP_MAX (__TCA_FLOWER_KEY_ENC_OPT_GTP_MAX - 1)
+enum {
   TCA_FLOWER_KEY_MPLS_OPTS_UNSPEC,
   TCA_FLOWER_KEY_MPLS_OPTS_LSE,
   __TCA_FLOWER_KEY_MPLS_OPTS_MAX,
diff --git a/sysroots/x86_64-linux-musl/include/linux/psci.h b/sysroots/x86_64-linux-musl/include/linux/psci.h
index bc522e7..31e7465 100644
--- a/sysroots/x86_64-linux-musl/include/linux/psci.h
+++ b/sysroots/x86_64-linux-musl/include/linux/psci.h
@@ -60,6 +60,8 @@
 #define PSCI_0_2_TOS_UP_MIGRATE 0
 #define PSCI_0_2_TOS_UP_NO_MIGRATE 1
 #define PSCI_0_2_TOS_MP 2
+#define PSCI_1_1_RESET_TYPE_SYSTEM_WARM_RESET 0
+#define PSCI_1_1_RESET_TYPE_VENDOR_START 0x80000000U
 #define PSCI_VERSION_MAJOR_SHIFT 16
 #define PSCI_VERSION_MINOR_MASK ((1U << PSCI_VERSION_MAJOR_SHIFT) - 1)
 #define PSCI_VERSION_MAJOR_MASK ~PSCI_VERSION_MINOR_MASK
diff --git a/sysroots/x86_64-linux-musl/include/linux/reiserfs_xattr.h b/sysroots/x86_64-linux-musl/include/linux/reiserfs_xattr.h
index 36d31f6..16a7a08 100644
--- a/sysroots/x86_64-linux-musl/include/linux/reiserfs_xattr.h
+++ b/sysroots/x86_64-linux-musl/include/linux/reiserfs_xattr.h
@@ -27,6 +27,6 @@
 struct reiserfs_security_handle {
   const char * name;
   void * value;
-  size_t length;
+  __kernel_size_t length;
 };
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/rfkill.h b/sysroots/x86_64-linux-musl/include/linux/rfkill.h
index 6020baf..b90e67c 100644
--- a/sysroots/x86_64-linux-musl/include/linux/rfkill.h
+++ b/sysroots/x86_64-linux-musl/include/linux/rfkill.h
@@ -63,4 +63,6 @@
 #define RFKILL_IOC_MAGIC 'R'
 #define RFKILL_IOC_NOINPUT 1
 #define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+#define RFKILL_IOC_MAX_SIZE 2
+#define RFKILL_IOCTL_MAX_SIZE _IOW(RFKILL_IOC_MAGIC, RFKILL_IOC_MAX_SIZE, __u32)
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/rpmsg.h b/sysroots/x86_64-linux-musl/include/linux/rpmsg.h
index c5b5a76..9ceccdd 100644
--- a/sysroots/x86_64-linux-musl/include/linux/rpmsg.h
+++ b/sysroots/x86_64-linux-musl/include/linux/rpmsg.h
@@ -28,4 +28,6 @@
 };
 #define RPMSG_CREATE_EPT_IOCTL _IOW(0xb5, 0x1, struct rpmsg_endpoint_info)
 #define RPMSG_DESTROY_EPT_IOCTL _IO(0xb5, 0x2)
+#define RPMSG_CREATE_DEV_IOCTL _IOW(0xb5, 0x3, struct rpmsg_endpoint_info)
+#define RPMSG_RELEASE_DEV_IOCTL _IOW(0xb5, 0x4, struct rpmsg_endpoint_info)
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/rseq.h b/sysroots/x86_64-linux-musl/include/linux/rseq.h
index ba0ceb1..29a9457 100644
--- a/sysroots/x86_64-linux-musl/include/linux/rseq.h
+++ b/sysroots/x86_64-linux-musl/include/linux/rseq.h
@@ -47,22 +47,7 @@
 struct rseq {
   __u32 cpu_id_start;
   __u32 cpu_id;
-  union {
-    __u64 ptr64;
-#ifdef __LP64__
-    __u64 ptr;
-#else
-    struct {
-#if defined(__BYTE_ORDER) && __BYTE_ORDER == __BIG_ENDIAN || defined(__BIG_ENDIAN)
-      __u32 padding;
-      __u32 ptr32;
-#else
-      __u32 ptr32;
-      __u32 padding;
-#endif
-    } ptr;
-#endif
-  } rseq_cs;
+  __u64 rseq_cs;
   __u32 flags;
 } __attribute__((aligned(4 * sizeof(__u64))));
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/rtc.h b/sysroots/x86_64-linux-musl/include/linux/rtc.h
index cf5f22a..d75bc45 100644
--- a/sysroots/x86_64-linux-musl/include/linux/rtc.h
+++ b/sysroots/x86_64-linux-musl/include/linux/rtc.h
@@ -96,7 +96,8 @@
 #define RTC_FEATURE_UPDATE_INTERRUPT 4
 #define RTC_FEATURE_CORRECTION 5
 #define RTC_FEATURE_BACKUP_SWITCH_MODE 6
-#define RTC_FEATURE_CNT 7
+#define RTC_FEATURE_ALARM_WAKEUP_ONLY 7
+#define RTC_FEATURE_CNT 8
 #define RTC_PARAM_FEATURES 0
 #define RTC_PARAM_CORRECTION 1
 #define RTC_PARAM_BACKUP_SWITCH_MODE 2
diff --git a/sysroots/x86_64-linux-musl/include/linux/rtnetlink.h b/sysroots/x86_64-linux-musl/include/linux/rtnetlink.h
index 91c3ee4..321e487 100644
--- a/sysroots/x86_64-linux-musl/include/linux/rtnetlink.h
+++ b/sysroots/x86_64-linux-musl/include/linux/rtnetlink.h
@@ -131,6 +131,8 @@
 #define RTM_NEWSTATS RTM_NEWSTATS
   RTM_GETSTATS = 94,
 #define RTM_GETSTATS RTM_GETSTATS
+  RTM_SETSTATS,
+#define RTM_SETSTATS RTM_SETSTATS
   RTM_NEWCACHEREPORT = 96,
 #define RTM_NEWCACHEREPORT RTM_NEWCACHEREPORT
   RTM_NEWCHAIN = 100,
@@ -163,6 +165,12 @@
 #define RTM_DELNEXTHOPBUCKET RTM_DELNEXTHOPBUCKET
   RTM_GETNEXTHOPBUCKET,
 #define RTM_GETNEXTHOPBUCKET RTM_GETNEXTHOPBUCKET
+  RTM_NEWTUNNEL = 120,
+#define RTM_NEWTUNNEL RTM_NEWTUNNEL
+  RTM_DELTUNNEL,
+#define RTM_DELTUNNEL RTM_DELTUNNEL
+  RTM_GETTUNNEL,
+#define RTM_GETTUNNEL RTM_GETTUNNEL
   __RTM_MAX,
 #define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1)
 };
@@ -561,6 +569,10 @@
 #define RTNLGRP_BRVLAN RTNLGRP_BRVLAN
   RTNLGRP_MCTP_IFADDR,
 #define RTNLGRP_MCTP_IFADDR RTNLGRP_MCTP_IFADDR
+  RTNLGRP_TUNNEL,
+#define RTNLGRP_TUNNEL RTNLGRP_TUNNEL
+  RTNLGRP_STATS,
+#define RTNLGRP_STATS RTNLGRP_STATS
   __RTNLGRP_MAX
 };
 #define RTNLGRP_MAX (__RTNLGRP_MAX - 1)
@@ -592,4 +604,5 @@
 #define RTEXT_FILTER_MRP (1 << 4)
 #define RTEXT_FILTER_CFM_CONFIG (1 << 5)
 #define RTEXT_FILTER_CFM_STATUS (1 << 6)
+#define RTEXT_FILTER_MST (1 << 7)
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/serial_core.h b/sysroots/x86_64-linux-musl/include/linux/serial_core.h
index 0caf698..b99c7d4 100644
--- a/sysroots/x86_64-linux-musl/include/linux/serial_core.h
+++ b/sysroots/x86_64-linux-musl/include/linux/serial_core.h
@@ -47,6 +47,7 @@
 #define PORT_SUNSAB 39
 #define PORT_NPCM 40
 #define PORT_TEGRA_TCU 41
+#define PORT_ASPEED_VUART 42
 #define PORT_PCH_8LINE 44
 #define PORT_PCH_2LINE 45
 #define PORT_DZ 46
@@ -122,4 +123,5 @@
 #define PORT_SIFIVE_V0 120
 #define PORT_SUNIX 121
 #define PORT_LINFLEXUART 122
+#define PORT_SUNPLUS 123
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/smc.h b/sysroots/x86_64-linux-musl/include/linux/smc.h
index 01494da..be6b71f 100644
--- a/sysroots/x86_64-linux-musl/include/linux/smc.h
+++ b/sysroots/x86_64-linux-musl/include/linux/smc.h
@@ -57,6 +57,9 @@
   SMC_NETLINK_DUMP_SEID,
   SMC_NETLINK_ENABLE_SEID,
   SMC_NETLINK_DISABLE_SEID,
+  SMC_NETLINK_DUMP_HS_LIMITATION,
+  SMC_NETLINK_ENABLE_HS_LIMITATION,
+  SMC_NETLINK_DISABLE_HS_LIMITATION,
 };
 enum {
   SMC_GEN_UNSPEC,
@@ -249,4 +252,11 @@
   __SMC_NLA_SEID_TABLE_MAX,
   SMC_NLA_SEID_TABLE_MAX = __SMC_NLA_SEID_TABLE_MAX - 1
 };
+enum {
+  SMC_NLA_HS_LIMITATION_UNSPEC,
+  SMC_NLA_HS_LIMITATION_ENABLED,
+  __SMC_NLA_HS_LIMITATION_MAX,
+  SMC_NLA_HS_LIMITATION_MAX = __SMC_NLA_HS_LIMITATION_MAX - 1
+};
+#define SMC_LIMIT_HS 1
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/socket.h b/sysroots/x86_64-linux-musl/include/linux/socket.h
index be16548..49dce45 100644
--- a/sysroots/x86_64-linux-musl/include/linux/socket.h
+++ b/sysroots/x86_64-linux-musl/include/linux/socket.h
@@ -32,4 +32,7 @@
 #define SOCK_SNDBUF_LOCK 1
 #define SOCK_RCVBUF_LOCK 2
 #define SOCK_BUF_LOCK_MASK (SOCK_SNDBUF_LOCK | SOCK_RCVBUF_LOCK)
+#define SOCK_TXREHASH_DEFAULT ((u8) - 1)
+#define SOCK_TXREHASH_DISABLED 0
+#define SOCK_TXREHASH_ENABLED 1
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/stddef.h b/sysroots/x86_64-linux-musl/include/linux/stddef.h
index d5cdf80..6bc6925 100644
--- a/sysroots/x86_64-linux-musl/include/linux/stddef.h
+++ b/sysroots/x86_64-linux-musl/include/linux/stddef.h
@@ -16,9 +16,12 @@
  ***
  ****************************************************************************
  ****************************************************************************/
+#ifndef _UAPI_LINUX_STDDEF_H
+#define _UAPI_LINUX_STDDEF_H
 #include <linux/compiler_types.h>
 #ifndef __always_inline
 #define __always_inline inline
 #endif
 #define __struct_group(TAG,NAME,ATTRS,MEMBERS...) union { struct { MEMBERS } ATTRS; struct TAG { MEMBERS } ATTRS NAME; }
 #define __DECLARE_FLEX_ARRAY(TYPE,NAME) struct { struct { } __empty_ ##NAME; TYPE NAME[]; }
+#endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/thermal.h b/sysroots/x86_64-linux-musl/include/linux/thermal.h
index 72ea378..2f9dccb 100644
--- a/sysroots/x86_64-linux-musl/include/linux/thermal.h
+++ b/sysroots/x86_64-linux-musl/include/linux/thermal.h
@@ -54,6 +54,10 @@
   THERMAL_GENL_ATTR_CDEV_MAX_STATE,
   THERMAL_GENL_ATTR_CDEV_NAME,
   THERMAL_GENL_ATTR_GOV_NAME,
+  THERMAL_GENL_ATTR_CPU_CAPABILITY,
+  THERMAL_GENL_ATTR_CPU_CAPABILITY_ID,
+  THERMAL_GENL_ATTR_CPU_CAPABILITY_PERFORMANCE,
+  THERMAL_GENL_ATTR_CPU_CAPABILITY_EFFICIENCY,
   __THERMAL_GENL_ATTR_MAX,
 };
 #define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1)
@@ -77,6 +81,7 @@
   THERMAL_GENL_EVENT_CDEV_DELETE,
   THERMAL_GENL_EVENT_CDEV_STATE_UPDATE,
   THERMAL_GENL_EVENT_TZ_GOV_CHANGE,
+  THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE,
   __THERMAL_GENL_EVENT_MAX,
 };
 #define THERMAL_GENL_EVENT_MAX (__THERMAL_GENL_EVENT_MAX - 1)
diff --git a/sysroots/x86_64-linux-musl/include/linux/tipc_config.h b/sysroots/x86_64-linux-musl/include/linux/tipc_config.h
index a371e37..c6ee1d1 100644
--- a/sysroots/x86_64-linux-musl/include/linux/tipc_config.h
+++ b/sysroots/x86_64-linux-musl/include/linux/tipc_config.h
@@ -22,7 +22,6 @@
 #include <linux/string.h>
 #include <linux/tipc.h>
 #include <asm/byteorder.h>
-#include <arpa/inet.h>
 #define TIPC_CMD_NOOP 0x0000
 #define TIPC_CMD_GET_NODES 0x0001
 #define TIPC_CMD_GET_MEDIA_NAMES 0x0002
diff --git a/sysroots/x86_64-linux-musl/include/linux/tty.h b/sysroots/x86_64-linux-musl/include/linux/tty.h
index dcce572..fb2379e 100644
--- a/sysroots/x86_64-linux-musl/include/linux/tty.h
+++ b/sysroots/x86_64-linux-musl/include/linux/tty.h
@@ -18,7 +18,6 @@
  ****************************************************************************/
 #ifndef _UAPI_LINUX_TTY_H
 #define _UAPI_LINUX_TTY_H
-#define NR_LDISCS 30
 #define N_TTY 0
 #define N_SLIP 1
 #define N_MOUSE 2
@@ -48,4 +47,6 @@
 #define N_SPEAKUP 26
 #define N_NULL 27
 #define N_MCTP 28
+#define N_DEVELOPMENT 29
+#define NR_LDISCS 30
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/types.h b/sysroots/x86_64-linux-musl/include/linux/types.h
index 9145e66..ce82a24 100644
--- a/sysroots/x86_64-linux-musl/include/linux/types.h
+++ b/sysroots/x86_64-linux-musl/include/linux/types.h
@@ -21,8 +21,7 @@
 #include <asm/types.h>
 #ifndef __ASSEMBLY__
 #include <linux/posix_types.h>
-#define __bitwise__
-#define __bitwise __bitwise__
+#define __bitwise
 typedef __u16 __bitwise __le16;
 typedef __u16 __bitwise __be16;
 typedef __u32 __bitwise __le32;
diff --git a/sysroots/x86_64-linux-musl/include/linux/userfaultfd.h b/sysroots/x86_64-linux-musl/include/linux/userfaultfd.h
index ca7b7a5..3727d0a 100644
--- a/sysroots/x86_64-linux-musl/include/linux/userfaultfd.h
+++ b/sysroots/x86_64-linux-musl/include/linux/userfaultfd.h
@@ -21,7 +21,7 @@
 #include <linux/types.h>
 #define UFFD_API ((__u64) 0xAA)
 #define UFFD_API_REGISTER_MODES (UFFDIO_REGISTER_MODE_MISSING | UFFDIO_REGISTER_MODE_WP | UFFDIO_REGISTER_MODE_MINOR)
-#define UFFD_API_FEATURES (UFFD_FEATURE_PAGEFAULT_FLAG_WP | UFFD_FEATURE_EVENT_FORK | UFFD_FEATURE_EVENT_REMAP | UFFD_FEATURE_EVENT_REMOVE | UFFD_FEATURE_EVENT_UNMAP | UFFD_FEATURE_MISSING_HUGETLBFS | UFFD_FEATURE_MISSING_SHMEM | UFFD_FEATURE_SIGBUS | UFFD_FEATURE_THREAD_ID | UFFD_FEATURE_MINOR_HUGETLBFS | UFFD_FEATURE_MINOR_SHMEM)
+#define UFFD_API_FEATURES (UFFD_FEATURE_PAGEFAULT_FLAG_WP | UFFD_FEATURE_EVENT_FORK | UFFD_FEATURE_EVENT_REMAP | UFFD_FEATURE_EVENT_REMOVE | UFFD_FEATURE_EVENT_UNMAP | UFFD_FEATURE_MISSING_HUGETLBFS | UFFD_FEATURE_MISSING_SHMEM | UFFD_FEATURE_SIGBUS | UFFD_FEATURE_THREAD_ID | UFFD_FEATURE_MINOR_HUGETLBFS | UFFD_FEATURE_MINOR_SHMEM | UFFD_FEATURE_EXACT_ADDRESS)
 #define UFFD_API_IOCTLS ((__u64) 1 << _UFFDIO_REGISTER | (__u64) 1 << _UFFDIO_UNREGISTER | (__u64) 1 << _UFFDIO_API)
 #define UFFD_API_RANGE_IOCTLS ((__u64) 1 << _UFFDIO_WAKE | (__u64) 1 << _UFFDIO_COPY | (__u64) 1 << _UFFDIO_ZEROPAGE | (__u64) 1 << _UFFDIO_WRITEPROTECT | (__u64) 1 << _UFFDIO_CONTINUE)
 #define UFFD_API_RANGE_IOCTLS_BASIC ((__u64) 1 << _UFFDIO_WAKE | (__u64) 1 << _UFFDIO_COPY | (__u64) 1 << _UFFDIO_CONTINUE)
@@ -95,6 +95,7 @@
 #define UFFD_FEATURE_THREAD_ID (1 << 8)
 #define UFFD_FEATURE_MINOR_HUGETLBFS (1 << 9)
 #define UFFD_FEATURE_MINOR_SHMEM (1 << 10)
+#define UFFD_FEATURE_EXACT_ADDRESS (1 << 11)
   __u64 features;
   __u64 ioctls;
 };
diff --git a/sysroots/x86_64-linux-musl/include/linux/v4l2-controls.h b/sysroots/x86_64-linux-musl/include/linux/v4l2-controls.h
index 1a11355..43014ef 100644
--- a/sysroots/x86_64-linux-musl/include/linux/v4l2-controls.h
+++ b/sysroots/x86_64-linux-musl/include/linux/v4l2-controls.h
@@ -119,6 +119,7 @@
 #define V4L2_CID_USER_CODA_BASE (V4L2_CID_USER_BASE + 0x10e0)
 #define V4L2_CID_USER_CCS_BASE (V4L2_CID_USER_BASE + 0x10f0)
 #define V4L2_CID_USER_ALLEGRO_BASE (V4L2_CID_USER_BASE + 0x1170)
+#define V4L2_CID_USER_ISL7998X_BASE (V4L2_CID_USER_BASE + 0x1180)
 #define V4L2_CID_CODEC_BASE (V4L2_CTRL_CLASS_CODEC | 0x900)
 #define V4L2_CID_CODEC_CLASS (V4L2_CTRL_CLASS_CODEC | 1)
 #define V4L2_CID_MPEG_STREAM_TYPE (V4L2_CID_CODEC_BASE + 0)
@@ -1153,6 +1154,8 @@
 #define V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC 0x01
 #define V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC 0x02
 #define V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD 0x04
+#define V4L2_H264_DECODE_PARAM_FLAG_PFRAME 0x08
+#define V4L2_H264_DECODE_PARAM_FLAG_BFRAME 0x10
 #define V4L2_CID_STATELESS_H264_DECODE_PARAMS (V4L2_CID_CODEC_STATELESS_BASE + 7)
 struct v4l2_ctrl_h264_decode_params {
   struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES];
diff --git a/sysroots/x86_64-linux-musl/include/linux/version.h b/sysroots/x86_64-linux-musl/include/linux/version.h
index 2dfd696..2677406 100644
--- a/sysroots/x86_64-linux-musl/include/linux/version.h
+++ b/sysroots/x86_64-linux-musl/include/linux/version.h
@@ -16,8 +16,8 @@
  ***
  ****************************************************************************
  ****************************************************************************/
-#define LINUX_VERSION_CODE 332032
+#define LINUX_VERSION_CODE 332288
 #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + ((c) > 255 ? 255 : (c)))
 #define LINUX_VERSION_MAJOR 5
-#define LINUX_VERSION_PATCHLEVEL 17
+#define LINUX_VERSION_PATCHLEVEL 18
 #define LINUX_VERSION_SUBLEVEL 0
diff --git a/sysroots/x86_64-linux-musl/include/linux/vfio.h b/sysroots/x86_64-linux-musl/include/linux/vfio.h
index e0f322b..8075408 100644
--- a/sysroots/x86_64-linux-musl/include/linux/vfio.h
+++ b/sysroots/x86_64-linux-musl/include/linux/vfio.h
@@ -110,7 +110,7 @@
 #define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff)
 #define VFIO_REGION_TYPE_GFX (1)
 #define VFIO_REGION_TYPE_CCW (2)
-#define VFIO_REGION_TYPE_MIGRATION (3)
+#define VFIO_REGION_TYPE_MIGRATION_DEPRECATED (3)
 #define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION (1)
 #define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG (2)
 #define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG (3)
@@ -130,17 +130,17 @@
 #define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD (1)
 #define VFIO_REGION_SUBTYPE_CCW_SCHIB (2)
 #define VFIO_REGION_SUBTYPE_CCW_CRW (3)
-#define VFIO_REGION_SUBTYPE_MIGRATION (1)
+#define VFIO_REGION_SUBTYPE_MIGRATION_DEPRECATED (1)
 struct vfio_device_migration_info {
   __u32 device_state;
-#define VFIO_DEVICE_STATE_STOP (0)
-#define VFIO_DEVICE_STATE_RUNNING (1 << 0)
-#define VFIO_DEVICE_STATE_SAVING (1 << 1)
-#define VFIO_DEVICE_STATE_RESUMING (1 << 2)
-#define VFIO_DEVICE_STATE_MASK (VFIO_DEVICE_STATE_RUNNING | VFIO_DEVICE_STATE_SAVING | VFIO_DEVICE_STATE_RESUMING)
-#define VFIO_DEVICE_STATE_VALID(state) (state & VFIO_DEVICE_STATE_RESUMING ? (state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_RESUMING : 1)
-#define VFIO_DEVICE_STATE_IS_ERROR(state) ((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_SAVING | VFIO_DEVICE_STATE_RESUMING))
-#define VFIO_DEVICE_STATE_SET_ERROR(state) ((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_SATE_SAVING | VFIO_DEVICE_STATE_RESUMING)
+#define VFIO_DEVICE_STATE_V1_STOP (0)
+#define VFIO_DEVICE_STATE_V1_RUNNING (1 << 0)
+#define VFIO_DEVICE_STATE_V1_SAVING (1 << 1)
+#define VFIO_DEVICE_STATE_V1_RESUMING (1 << 2)
+#define VFIO_DEVICE_STATE_MASK (VFIO_DEVICE_STATE_V1_RUNNING | VFIO_DEVICE_STATE_V1_SAVING | VFIO_DEVICE_STATE_V1_RESUMING)
+#define VFIO_DEVICE_STATE_VALID(state) (state & VFIO_DEVICE_STATE_V1_RESUMING ? (state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_V1_RESUMING : 1)
+#define VFIO_DEVICE_STATE_IS_ERROR(state) ((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_V1_SAVING | VFIO_DEVICE_STATE_V1_RESUMING))
+#define VFIO_DEVICE_STATE_SET_ERROR(state) ((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_STATE_V1_SAVING | VFIO_DEVICE_STATE_V1_RESUMING)
   __u32 reserved;
   __u64 pending_bytes;
   __u64 data_offset;
@@ -285,6 +285,25 @@
 };
 #define VFIO_DEVICE_FEATURE _IO(VFIO_TYPE, VFIO_BASE + 17)
 #define VFIO_DEVICE_FEATURE_PCI_VF_TOKEN (0)
+struct vfio_device_feature_migration {
+  __aligned_u64 flags;
+#define VFIO_MIGRATION_STOP_COPY (1 << 0)
+#define VFIO_MIGRATION_P2P (1 << 1)
+};
+#define VFIO_DEVICE_FEATURE_MIGRATION 1
+struct vfio_device_feature_mig_state {
+  __u32 device_state;
+  __s32 data_fd;
+};
+#define VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE 2
+enum vfio_device_mig_state {
+  VFIO_DEVICE_STATE_ERROR = 0,
+  VFIO_DEVICE_STATE_STOP = 1,
+  VFIO_DEVICE_STATE_RUNNING = 2,
+  VFIO_DEVICE_STATE_STOP_COPY = 3,
+  VFIO_DEVICE_STATE_RESUMING = 4,
+  VFIO_DEVICE_STATE_RUNNING_P2P = 5,
+};
 struct vfio_iommu_type1_info {
   __u32 argsz;
   __u32 flags;
diff --git a/sysroots/x86_64-linux-musl/include/linux/vhost.h b/sysroots/x86_64-linux-musl/include/linux/vhost.h
index 53b01c4..7769beb 100644
--- a/sysroots/x86_64-linux-musl/include/linux/vhost.h
+++ b/sysroots/x86_64-linux-musl/include/linux/vhost.h
@@ -64,4 +64,6 @@
 #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16)
 #define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int)
 #define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, struct vhost_vdpa_iova_range)
+#define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32)
+#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32)
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/videodev2.h b/sysroots/x86_64-linux-musl/include/linux/videodev2.h
index 1cae711..55c1a95 100644
--- a/sysroots/x86_64-linux-musl/include/linux/videodev2.h
+++ b/sysroots/x86_64-linux-musl/include/linux/videodev2.h
@@ -24,7 +24,7 @@
 #include <linux/types.h>
 #include <linux/v4l2-common.h>
 #include <linux/v4l2-controls.h>
-#define VIDEO_MAX_FRAME 32
+#define VIDEO_MAX_FRAME 64
 #define VIDEO_MAX_PLANES 8
 #define v4l2_fourcc(a,b,c,d) ((__u32) (a) | ((__u32) (b) << 8) | ((__u32) (c) << 16) | ((__u32) (d) << 24))
 #define v4l2_fourcc_be(a,b,c,d) (v4l2_fourcc(a, b, c, d) | (1U << 31))
@@ -300,6 +300,8 @@
 #define V4L2_PIX_FMT_NV12_32L32 v4l2_fourcc('S', 'T', '1', '2')
 #define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2')
 #define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2')
+#define V4L2_PIX_FMT_NV12M_8L128 v4l2_fourcc('N', 'A', '1', '2')
+#define V4L2_PIX_FMT_NV12M_10BE_8L128 v4l2_fourcc_be('N', 'T', '1', '2')
 #define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1')
 #define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G')
 #define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G')
diff --git a/sysroots/x86_64-linux-musl/include/linux/virtio_config.h b/sysroots/x86_64-linux-musl/include/linux/virtio_config.h
index 6198fd1..30e552b 100644
--- a/sysroots/x86_64-linux-musl/include/linux/virtio_config.h
+++ b/sysroots/x86_64-linux-musl/include/linux/virtio_config.h
@@ -35,6 +35,7 @@
 #define VIRTIO_F_ACCESS_PLATFORM 33
 #define VIRTIO_F_IOMMU_PLATFORM VIRTIO_F_ACCESS_PLATFORM
 #define VIRTIO_F_RING_PACKED 34
+#define VIRTIO_F_IN_ORDER 35
 #define VIRTIO_F_ORDER_PLATFORM 36
 #define VIRTIO_F_SR_IOV 37
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/linux/virtio_crypto.h b/sysroots/x86_64-linux-musl/include/linux/virtio_crypto.h
index 2ce760f..7d7561d 100644
--- a/sysroots/x86_64-linux-musl/include/linux/virtio_crypto.h
+++ b/sysroots/x86_64-linux-musl/include/linux/virtio_crypto.h
@@ -26,6 +26,7 @@
 #define VIRTIO_CRYPTO_SERVICE_HASH 1
 #define VIRTIO_CRYPTO_SERVICE_MAC 2
 #define VIRTIO_CRYPTO_SERVICE_AEAD 3
+#define VIRTIO_CRYPTO_SERVICE_AKCIPHER 4
 #define VIRTIO_CRYPTO_OPCODE(service,op) (((service) << 8) | (op))
 struct virtio_crypto_ctrl_header {
 #define VIRTIO_CRYPTO_CIPHER_CREATE_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x02)
@@ -36,6 +37,8 @@
 #define VIRTIO_CRYPTO_MAC_DESTROY_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x03)
 #define VIRTIO_CRYPTO_AEAD_CREATE_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x02)
 #define VIRTIO_CRYPTO_AEAD_DESTROY_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x03)
+#define VIRTIO_CRYPTO_AKCIPHER_CREATE_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x04)
+#define VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x05)
   __le32 opcode;
   __le32 algo;
   __le32 flag;
@@ -137,6 +140,51 @@
   struct virtio_crypto_aead_session_para para;
   __u8 padding[32];
 };
+struct virtio_crypto_rsa_session_para {
+#define VIRTIO_CRYPTO_RSA_RAW_PADDING 0
+#define VIRTIO_CRYPTO_RSA_PKCS1_PADDING 1
+  __le32 padding_algo;
+#define VIRTIO_CRYPTO_RSA_NO_HASH 0
+#define VIRTIO_CRYPTO_RSA_MD2 1
+#define VIRTIO_CRYPTO_RSA_MD3 2
+#define VIRTIO_CRYPTO_RSA_MD4 3
+#define VIRTIO_CRYPTO_RSA_MD5 4
+#define VIRTIO_CRYPTO_RSA_SHA1 5
+#define VIRTIO_CRYPTO_RSA_SHA256 6
+#define VIRTIO_CRYPTO_RSA_SHA384 7
+#define VIRTIO_CRYPTO_RSA_SHA512 8
+#define VIRTIO_CRYPTO_RSA_SHA224 9
+  __le32 hash_algo;
+};
+struct virtio_crypto_ecdsa_session_para {
+#define VIRTIO_CRYPTO_CURVE_UNKNOWN 0
+#define VIRTIO_CRYPTO_CURVE_NIST_P192 1
+#define VIRTIO_CRYPTO_CURVE_NIST_P224 2
+#define VIRTIO_CRYPTO_CURVE_NIST_P256 3
+#define VIRTIO_CRYPTO_CURVE_NIST_P384 4
+#define VIRTIO_CRYPTO_CURVE_NIST_P521 5
+  __le32 curve_id;
+  __le32 padding;
+};
+struct virtio_crypto_akcipher_session_para {
+#define VIRTIO_CRYPTO_NO_AKCIPHER 0
+#define VIRTIO_CRYPTO_AKCIPHER_RSA 1
+#define VIRTIO_CRYPTO_AKCIPHER_DSA 2
+#define VIRTIO_CRYPTO_AKCIPHER_ECDSA 3
+  __le32 algo;
+#define VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PUBLIC 1
+#define VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PRIVATE 2
+  __le32 keytype;
+  __le32 keylen;
+  union {
+    struct virtio_crypto_rsa_session_para rsa;
+    struct virtio_crypto_ecdsa_session_para ecdsa;
+  } u;
+};
+struct virtio_crypto_akcipher_create_session_req {
+  struct virtio_crypto_akcipher_session_para para;
+  __u8 padding[36];
+};
 struct virtio_crypto_alg_chain_session_para {
 #define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER 1
 #define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH 2
@@ -180,6 +228,7 @@
     struct virtio_crypto_hash_create_session_req hash_create_session;
     struct virtio_crypto_mac_create_session_req mac_create_session;
     struct virtio_crypto_aead_create_session_req aead_create_session;
+    struct virtio_crypto_akcipher_create_session_req akcipher_create_session;
     struct virtio_crypto_destroy_session_req destroy_session;
     __u8 padding[56];
   } u;
@@ -191,6 +240,10 @@
 #define VIRTIO_CRYPTO_MAC VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x00)
 #define VIRTIO_CRYPTO_AEAD_ENCRYPT VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x00)
 #define VIRTIO_CRYPTO_AEAD_DECRYPT VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x01)
+#define VIRTIO_CRYPTO_AKCIPHER_ENCRYPT VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x00)
+#define VIRTIO_CRYPTO_AKCIPHER_DECRYPT VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x01)
+#define VIRTIO_CRYPTO_AKCIPHER_SIGN VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x02)
+#define VIRTIO_CRYPTO_AKCIPHER_VERIFY VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x03)
   __le32 opcode;
   __le32 algo;
   __le64 session_id;
@@ -256,6 +309,14 @@
   struct virtio_crypto_aead_para para;
   __u8 padding[32];
 };
+struct virtio_crypto_akcipher_para {
+  __le32 src_data_len;
+  __le32 dst_data_len;
+};
+struct virtio_crypto_akcipher_data_req {
+  struct virtio_crypto_akcipher_para para;
+  __u8 padding[40];
+};
 struct virtio_crypto_op_data_req {
   struct virtio_crypto_op_header header;
   union {
@@ -263,6 +324,7 @@
     struct virtio_crypto_hash_data_req hash_req;
     struct virtio_crypto_mac_data_req mac_req;
     struct virtio_crypto_aead_data_req aead_req;
+    struct virtio_crypto_akcipher_data_req akcipher_req;
     __u8 padding[48];
   } u;
 };
@@ -271,6 +333,8 @@
 #define VIRTIO_CRYPTO_BADMSG 2
 #define VIRTIO_CRYPTO_NOTSUPP 3
 #define VIRTIO_CRYPTO_INVSESS 4
+#define VIRTIO_CRYPTO_NOSPC 5
+#define VIRTIO_CRYPTO_KEY_REJECTED 6
 #define VIRTIO_CRYPTO_S_HW_READY (1 << 0)
 struct virtio_crypto_config {
   __le32 status;
@@ -284,7 +348,7 @@
   __le32 aead_algo;
   __le32 max_cipher_key_len;
   __le32 max_auth_key_len;
-  __le32 reserve;
+  __le32 akcipher_algo;
   __le64 max_size;
 };
 struct virtio_crypto_inhdr {
diff --git a/sysroots/x86_64-linux-musl/include/linux/virtio_ids.h b/sysroots/x86_64-linux-musl/include/linux/virtio_ids.h
index 2894700..b31ed93 100644
--- a/sysroots/x86_64-linux-musl/include/linux/virtio_ids.h
+++ b/sysroots/x86_64-linux-musl/include/linux/virtio_ids.h
@@ -57,11 +57,11 @@
 #define VIRTIO_ID_AUDIO_POLICY 39
 #define VIRTIO_ID_BT 40
 #define VIRTIO_ID_GPIO 41
-#define VIRTIO_TRANS_ID_NET 1000
-#define VIRTIO_TRANS_ID_BLOCK 1001
-#define VIRTIO_TRANS_ID_BALLOON 1002
-#define VIRTIO_TRANS_ID_CONSOLE 1003
-#define VIRTIO_TRANS_ID_SCSI 1004
-#define VIRTIO_TRANS_ID_RNG 1005
-#define VIRTIO_TRANS_ID_9P 1009
+#define VIRTIO_TRANS_ID_NET 0x1000
+#define VIRTIO_TRANS_ID_BLOCK 0x1001
+#define VIRTIO_TRANS_ID_BALLOON 0x1002
+#define VIRTIO_TRANS_ID_CONSOLE 0x1003
+#define VIRTIO_TRANS_ID_SCSI 0x1004
+#define VIRTIO_TRANS_ID_RNG 0x1005
+#define VIRTIO_TRANS_ID_9P 0x1009
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/misc/fastrpc.h b/sysroots/x86_64-linux-musl/include/misc/fastrpc.h
index 62955ec..e82b961 100644
--- a/sysroots/x86_64-linux-musl/include/misc/fastrpc.h
+++ b/sysroots/x86_64-linux-musl/include/misc/fastrpc.h
@@ -27,11 +27,32 @@
 #define FASTRPC_IOCTL_MMAP _IOWR('R', 6, struct fastrpc_req_mmap)
 #define FASTRPC_IOCTL_MUNMAP _IOWR('R', 7, struct fastrpc_req_munmap)
 #define FASTRPC_IOCTL_INIT_ATTACH_SNS _IO('R', 8)
+#define FASTRPC_IOCTL_MEM_MAP _IOWR('R', 10, struct fastrpc_mem_map)
+#define FASTRPC_IOCTL_MEM_UNMAP _IOWR('R', 11, struct fastrpc_mem_unmap)
+#define FASTRPC_IOCTL_GET_DSP_INFO _IOWR('R', 13, struct fastrpc_ioctl_capability)
+enum fastrpc_map_flags {
+  FASTRPC_MAP_STATIC = 0,
+  FASTRPC_MAP_RESERVED,
+  FASTRPC_MAP_FD = 2,
+  FASTRPC_MAP_FD_DELAYED,
+  FASTRPC_MAP_FD_NOMAP = 16,
+  FASTRPC_MAP_MAX,
+};
+enum fastrpc_proc_attr {
+  FASTRPC_MODE_DEBUG = (1 << 0),
+  FASTRPC_MODE_PTRACE = (1 << 1),
+  FASTRPC_MODE_CRC = (1 << 2),
+  FASTRPC_MODE_UNSIGNED_MODULE = (1 << 3),
+  FASTRPC_MODE_ADAPTIVE_QOS = (1 << 4),
+  FASTRPC_MODE_SYSTEM_PROCESS = (1 << 5),
+  FASTRPC_MODE_PRIVILEGED = (1 << 6),
+};
+#define FASTRPC_ATTR_SECUREMAP (1)
 struct fastrpc_invoke_args {
   __u64 ptr;
   __u64 length;
   __s32 fd;
-  __u32 reserved;
+  __u32 attr;
 };
 struct fastrpc_invoke {
   __u32 handle;
@@ -57,8 +78,32 @@
   __u64 size;
   __u64 vaddrout;
 };
+struct fastrpc_mem_map {
+  __s32 version;
+  __s32 fd;
+  __s32 offset;
+  __u32 flags;
+  __u64 vaddrin;
+  __u64 length;
+  __u64 vaddrout;
+  __s32 attrs;
+  __s32 reserved[4];
+};
 struct fastrpc_req_munmap {
   __u64 vaddrout;
   __u64 size;
 };
+struct fastrpc_mem_unmap {
+  __s32 vesion;
+  __s32 fd;
+  __u64 vaddr;
+  __u64 length;
+  __s32 reserved[5];
+};
+struct fastrpc_ioctl_capability {
+  __u32 domain;
+  __u32 attribute_id;
+  __u32 capability;
+  __u32 reserved[4];
+};
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/misc/habanalabs.h b/sysroots/x86_64-linux-musl/include/misc/habanalabs.h
index 6e3439a..f9e1bb9 100644
--- a/sysroots/x86_64-linux-musl/include/misc/habanalabs.h
+++ b/sysroots/x86_64-linux-musl/include/misc/habanalabs.h
@@ -24,6 +24,7 @@
 #define GAUDI_DRIVER_SRAM_RESERVED_SIZE_FROM_START 0x80
 #define GAUDI_FIRST_AVAILABLE_W_S_SYNC_OBJECT 144
 #define GAUDI_FIRST_AVAILABLE_W_S_MONITOR 72
+#define TS_MAX_ELEMENTS_NUM (1 << 20)
 enum goya_queue_id {
   GOYA_QUEUE_ID_DMA_0 = 0,
   GOYA_QUEUE_ID_DMA_1 = 1,
@@ -294,6 +295,9 @@
   __u8 card_name[HL_INFO_CARD_NAME_MAX_LEN];
   __u64 reserved2;
   __u64 dram_page_size;
+  __u32 reserved3;
+  __u16 number_of_user_interrupts;
+  __u16 pad2;
 };
 struct hl_info_dram_usage {
   __u64 dram_free_mem;
@@ -512,6 +516,7 @@
 #define HL_WAIT_CS_FLAGS_INTERRUPT_MASK 0xFFF00000
 #define HL_WAIT_CS_FLAGS_MULTI_CS 0x4
 #define HL_WAIT_CS_FLAGS_INTERRUPT_KERNEL_CQ 0x10
+#define HL_WAIT_CS_FLAGS_REGISTER_INTERRUPT 0x20
 #define HL_WAIT_MULTI_CS_LIST_MAX_LEN 32
 struct hl_wait_cs_in {
   union {
@@ -537,6 +542,8 @@
     __u64 interrupt_timeout_us;
   };
   __u64 cq_counters_offset;
+  __u64 timestamp_handle;
+  __u64 timestamp_offset;
 };
 #define HL_WAIT_CS_STATUS_COMPLETED 0
 #define HL_WAIT_CS_STATUS_BUSY 1
@@ -561,6 +568,7 @@
 #define HL_MEM_OP_UNMAP 3
 #define HL_MEM_OP_MAP_BLOCK 4
 #define HL_MEM_OP_EXPORT_DMABUF_FD 5
+#define HL_MEM_OP_TS_ALLOC 6
 #define HL_MEM_CONTIGUOUS 0x1
 #define HL_MEM_SHARED 0x2
 #define HL_MEM_USERPTR 0x4
@@ -569,6 +577,7 @@
   union {
     struct {
       __u64 mem_size;
+      __u64 page_size;
     } alloc;
     struct {
       __u64 handle;
@@ -596,7 +605,7 @@
   __u32 op;
   __u32 flags;
   __u32 ctx_id;
-  __u32 pad;
+  __u32 num_of_elements;
 };
 struct hl_mem_out {
   union {
diff --git a/sysroots/x86_64-linux-musl/include/netinet/if_ether.h b/sysroots/x86_64-linux-musl/include/netinet/if_ether.h
index 55a2ff1..3479f51 100644
--- a/sysroots/x86_64-linux-musl/include/netinet/if_ether.h
+++ b/sysroots/x86_64-linux-musl/include/netinet/if_ether.h
@@ -66,6 +66,7 @@
 #define ETH_P_1588	0x88F7
 #define ETH_P_NCSI	0x88F8
 #define ETH_P_PRP	0x88FB
+#define ETH_P_CFM	0x8902
 #define ETH_P_FCOE	0x8906
 #define ETH_P_TDLS	0x890D
 #define ETH_P_FIP	0x8914
diff --git a/sysroots/x86_64-linux-musl/include/netinet/in.h b/sysroots/x86_64-linux-musl/include/netinet/in.h
index f959433..fb628b6 100644
--- a/sysroots/x86_64-linux-musl/include/netinet/in.h
+++ b/sysroots/x86_64-linux-musl/include/netinet/in.h
@@ -48,6 +48,7 @@
 #define INADDR_BROADCAST  ((in_addr_t) 0xffffffff)
 #define INADDR_NONE       ((in_addr_t) 0xffffffff)
 #define INADDR_LOOPBACK   ((in_addr_t) 0x7f000001)
+#define INADDR_DUMMY      ((in_addr_t) 0xc0000008)
 
 #define INADDR_UNSPEC_GROUP     ((in_addr_t) 0xe0000000)
 #define INADDR_ALLHOSTS_GROUP   ((in_addr_t) 0xe0000001)
diff --git a/sysroots/x86_64-linux-musl/include/netinet/tcp.h b/sysroots/x86_64-linux-musl/include/netinet/tcp.h
index b7b997f..fad1d84 100644
--- a/sysroots/x86_64-linux-musl/include/netinet/tcp.h
+++ b/sysroots/x86_64-linux-musl/include/netinet/tcp.h
@@ -80,6 +80,8 @@
 	TCP_NLA_SRTT,
 	TCP_NLA_TIMEOUT_REHASH,
 	TCP_NLA_BYTES_NOTSENT,
+	TCP_NLA_EDT,
+	TCP_NLA_TTL,
 };
 
 #if defined(_GNU_SOURCE) || defined(_BSD_SOURCE)
@@ -281,12 +283,21 @@
 	uint32_t rcv_wup;
 };
 
+#define TCP_RECEIVE_ZEROCOPY_FLAG_TLB_CLEAN_HINT 0x1
+
 struct tcp_zerocopy_receive {
 	uint64_t address;
 	uint32_t length;
 	uint32_t recv_skip_hint;
 	uint32_t inq;
 	int32_t err;
+	uint64_t copybuf_address;
+	int32_t copybuf_len;
+	uint32_t flags;
+	uint64_t msg_control;
+	uint64_t msg_controllen;
+	uint32_t msg_flags;
+	uint32_t reserved;
 };
 
 #endif
diff --git a/sysroots/x86_64-linux-musl/include/signal.h b/sysroots/x86_64-linux-musl/include/signal.h
index 3ad38c8..b6711bc 100644
--- a/sysroots/x86_64-linux-musl/include/signal.h
+++ b/sysroots/x86_64-linux-musl/include/signal.h
@@ -178,6 +178,9 @@
 #define sa_handler   __sa_handler.sa_handler
 #define sa_sigaction __sa_handler.sa_sigaction
 
+#define SA_UNSUPPORTED 0x00000400
+#define SA_EXPOSE_TAGBITS 0x00000800
+
 struct sigevent {
 	union sigval sigev_value;
 	int sigev_signo;
@@ -262,6 +265,9 @@
 #if defined(_BSD_SOURCE) || defined(_GNU_SOURCE)
 #define NSIG _NSIG
 typedef void (*sig_t)(int);
+
+#define SYS_SECCOMP 1
+#define SYS_USER_DISPATCH 2
 #endif
 
 #ifdef _GNU_SOURCE
diff --git a/sysroots/x86_64-linux-musl/include/sound/sof/abi.h b/sysroots/x86_64-linux-musl/include/sound/sof/abi.h
index 3af3c9d..810a0b4 100644
--- a/sysroots/x86_64-linux-musl/include/sound/sof/abi.h
+++ b/sysroots/x86_64-linux-musl/include/sound/sof/abi.h
@@ -19,8 +19,8 @@
 #ifndef __INCLUDE_UAPI_SOUND_SOF_ABI_H__
 #define __INCLUDE_UAPI_SOUND_SOF_ABI_H__
 #define SOF_ABI_MAJOR 3
-#define SOF_ABI_MINOR 18
-#define SOF_ABI_PATCH 0
+#define SOF_ABI_MINOR 19
+#define SOF_ABI_PATCH 1
 #define SOF_ABI_MAJOR_SHIFT 24
 #define SOF_ABI_MAJOR_MASK 0xff
 #define SOF_ABI_MINOR_SHIFT 12
diff --git a/sysroots/x86_64-linux-musl/include/sys/prctl.h b/sysroots/x86_64-linux-musl/include/sys/prctl.h
index 4ba73f4..087a75c 100644
--- a/sysroots/x86_64-linux-musl/include/sys/prctl.h
+++ b/sysroots/x86_64-linux-musl/include/sys/prctl.h
@@ -168,6 +168,15 @@
 #define PR_SET_IO_FLUSHER 57
 #define PR_GET_IO_FLUSHER 58
 
+#define PR_SET_SYSCALL_USER_DISPATCH 59
+#define PR_SYS_DISPATCH_OFF 0
+#define PR_SYS_DISPATCH_ON 1
+#define SYSCALL_DISPATCH_FILTER_ALLOW 0
+#define SYSCALL_DISPATCH_FILTER_BLOCK 1
+
+#define PR_PAC_SET_ENABLED_KEYS 60
+#define PR_PAC_GET_ENABLED_KEYS 61
+
 int prctl (int, ...);
 
 #ifdef __cplusplus
diff --git a/sysroots/x86_64-linux-musl/include/sys/ptrace.h b/sysroots/x86_64-linux-musl/include/sys/ptrace.h
index 5d62a98..c72e3c0 100644
--- a/sysroots/x86_64-linux-musl/include/sys/ptrace.h
+++ b/sysroots/x86_64-linux-musl/include/sys/ptrace.h
@@ -42,6 +42,7 @@
 #define PTRACE_SECCOMP_GET_FILTER 0x420c
 #define PTRACE_SECCOMP_GET_METADATA 0x420d
 #define PTRACE_GET_SYSCALL_INFO 0x420e
+#define PTRACE_GET_RSEQ_CONFIGURATION	0x420f
 
 #define PT_READ_I PTRACE_PEEKTEXT
 #define PT_READ_D PTRACE_PEEKDATA
@@ -130,6 +131,14 @@
 	};
 };
 
+struct __ptrace_rseq_configuration {
+	uint64_t rseq_abi_pointer;
+	uint32_t rseq_abi_size;
+	uint32_t signature;
+	uint32_t flags;
+	uint32_t pad;
+};
+
 long ptrace(int, ...);
 
 #ifdef __cplusplus
diff --git a/sysroots/x86_64-linux-musl/include/sys/socket.h b/sysroots/x86_64-linux-musl/include/sys/socket.h
index cc06bdf..0b39d83 100644
--- a/sysroots/x86_64-linux-musl/include/sys/socket.h
+++ b/sysroots/x86_64-linux-musl/include/sys/socket.h
@@ -289,6 +289,8 @@
 #define SCM_TXTIME              SO_TXTIME
 #define SO_BINDTOIFINDEX        62
 #define SO_DETACH_REUSEPORT_BPF 68
+#define SO_PREFER_BUSY_POLL     69
+#define SO_BUSY_POLL_BUDGET     70
 
 #ifndef SOL_SOCKET
 #define SOL_SOCKET      1
diff --git a/sysroots/x86_64-linux-musl/include/zconf.h b/sysroots/x86_64-linux-musl/include/zconf.h
new file mode 100644
index 0000000..7b3f8da
--- /dev/null
+++ b/sysroots/x86_64-linux-musl/include/zconf.h
@@ -0,0 +1,553 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+// ANDROID CHNAGE: Upstream chromium renames all the functions; we don't want
+// that.
+#define CHROMIUM_ZLIB_NO_CHROMECONF
+
+/*
+ * This library is also built as a part of AOSP, which does not need to include
+ * chromeconf.h. This config does not want chromeconf.h, so it can set this
+ * macro to opt out. While this works today, there's no guarantee that building
+ * zlib outside of Chromium keeps working in the future.
+ */
+#if !defined(CHROMIUM_ZLIB_NO_CHROMECONF)
+/* This include does prefixing as below, but with an updated set of names.  Also
+ * sets up export macros in component builds. */
+#include "chromeconf.h"
+#endif
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
+ */
+#ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET
+
+/* all linked symbols and init macros */
+#  define _dist_code            z__dist_code
+#  define _length_code          z__length_code
+#  define _tr_align             z__tr_align
+#  define _tr_flush_bits        z__tr_flush_bits
+#  define _tr_flush_block       z__tr_flush_block
+#  define _tr_init              z__tr_init
+#  define _tr_stored_block      z__tr_stored_block
+#  define _tr_tally             z__tr_tally
+#  define adler32               z_adler32
+#  define adler32_combine       z_adler32_combine
+#  define adler32_combine64     z_adler32_combine64
+#  define adler32_z             z_adler32_z
+#  ifndef Z_SOLO
+#    define compress              z_compress
+#    define compress2             z_compress2
+#    define compressBound         z_compressBound
+#  endif
+#  define crc32                 z_crc32
+#  define crc32_combine         z_crc32_combine
+#  define crc32_combine64       z_crc32_combine64
+#  define crc32_z               z_crc32_z
+#  define deflate               z_deflate
+#  define deflateBound          z_deflateBound
+#  define deflateCopy           z_deflateCopy
+#  define deflateEnd            z_deflateEnd
+#  define deflateGetDictionary  z_deflateGetDictionary
+#  define deflateInit           z_deflateInit
+#  define deflateInit2          z_deflateInit2
+#  define deflateInit2_         z_deflateInit2_
+#  define deflateInit_          z_deflateInit_
+#  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
+#  define deflatePrime          z_deflatePrime
+#  define deflateReset          z_deflateReset
+#  define deflateResetKeep      z_deflateResetKeep
+#  define deflateSetDictionary  z_deflateSetDictionary
+#  define deflateSetHeader      z_deflateSetHeader
+#  define deflateTune           z_deflateTune
+#  define deflate_copyright     z_deflate_copyright
+#  define get_crc_table         z_get_crc_table
+#  ifndef Z_SOLO
+#    define gz_error              z_gz_error
+#    define gz_intmax             z_gz_intmax
+#    define gz_strwinerror        z_gz_strwinerror
+#    define gzbuffer              z_gzbuffer
+#    define gzclearerr            z_gzclearerr
+#    define gzclose               z_gzclose
+#    define gzclose_r             z_gzclose_r
+#    define gzclose_w             z_gzclose_w
+#    define gzdirect              z_gzdirect
+#    define gzdopen               z_gzdopen
+#    define gzeof                 z_gzeof
+#    define gzerror               z_gzerror
+#    define gzflush               z_gzflush
+#    define gzfread               z_gzfread
+#    define gzfwrite              z_gzfwrite
+#    define gzgetc                z_gzgetc
+#    define gzgetc_               z_gzgetc_
+#    define gzgets                z_gzgets
+#    define gzoffset              z_gzoffset
+#    define gzoffset64            z_gzoffset64
+#    define gzopen                z_gzopen
+#    define gzopen64              z_gzopen64
+#    ifdef _WIN32
+#      define gzopen_w              z_gzopen_w
+#    endif
+#    define gzprintf              z_gzprintf
+#    define gzputc                z_gzputc
+#    define gzputs                z_gzputs
+#    define gzread                z_gzread
+#    define gzrewind              z_gzrewind
+#    define gzseek                z_gzseek
+#    define gzseek64              z_gzseek64
+#    define gzsetparams           z_gzsetparams
+#    define gztell                z_gztell
+#    define gztell64              z_gztell64
+#    define gzungetc              z_gzungetc
+#    define gzvprintf             z_gzvprintf
+#    define gzwrite               z_gzwrite
+#  endif
+#  define inflate               z_inflate
+#  define inflateBack           z_inflateBack
+#  define inflateBackEnd        z_inflateBackEnd
+#  define inflateBackInit       z_inflateBackInit
+#  define inflateBackInit_      z_inflateBackInit_
+#  define inflateCodesUsed      z_inflateCodesUsed
+#  define inflateCopy           z_inflateCopy
+#  define inflateEnd            z_inflateEnd
+#  define inflateGetDictionary  z_inflateGetDictionary
+#  define inflateGetHeader      z_inflateGetHeader
+#  define inflateInit           z_inflateInit
+#  define inflateInit2          z_inflateInit2
+#  define inflateInit2_         z_inflateInit2_
+#  define inflateInit_          z_inflateInit_
+#  define inflateMark           z_inflateMark
+#  define inflatePrime          z_inflatePrime
+#  define inflateReset          z_inflateReset
+#  define inflateReset2         z_inflateReset2
+#  define inflateResetKeep      z_inflateResetKeep
+#  define inflateSetDictionary  z_inflateSetDictionary
+#  define inflateSync           z_inflateSync
+#  define inflateSyncPoint      z_inflateSyncPoint
+#  define inflateUndermine      z_inflateUndermine
+#  define inflateValidate       z_inflateValidate
+#  define inflate_copyright     z_inflate_copyright
+#  define inflate_fast          z_inflate_fast
+#  define inflate_table         z_inflate_table
+#  ifndef Z_SOLO
+#    define uncompress            z_uncompress
+#    define uncompress2           z_uncompress2
+#  endif
+#  define zError                z_zError
+#  ifndef Z_SOLO
+#    define zcalloc               z_zcalloc
+#    define zcfree                z_zcfree
+#  endif
+#  define zlibCompileFlags      z_zlibCompileFlags
+#  define zlibVersion           z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+#  define Byte                  z_Byte
+#  define Bytef                 z_Bytef
+#  define alloc_func            z_alloc_func
+#  define charf                 z_charf
+#  define free_func             z_free_func
+#  ifndef Z_SOLO
+#    define gzFile                z_gzFile
+#  endif
+#  define gz_header             z_gz_header
+#  define gz_headerp            z_gz_headerp
+#  define in_func               z_in_func
+#  define intf                  z_intf
+#  define out_func              z_out_func
+#  define uInt                  z_uInt
+#  define uIntf                 z_uIntf
+#  define uLong                 z_uLong
+#  define uLongf                z_uLongf
+#  define voidp                 z_voidp
+#  define voidpc                z_voidpc
+#  define voidpf                z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+#  define gz_header_s           z_gz_header_s
+#  define internal_state        z_internal_state
+
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+#  define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+#  define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+#  define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+#  ifndef WIN32
+#    define WIN32
+#  endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+#    ifndef SYS16BIT
+#      define SYS16BIT
+#    endif
+#  endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+#  define MAXSEG_64K
+#endif
+#ifdef MSDOS
+#  define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+#  ifndef STDC
+#    define STDC
+#  endif
+#  if __STDC_VERSION__ >= 199901L
+#    ifndef STDC99
+#      define STDC99
+#    endif
+#  endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+#  define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
+#  define STDC
+#endif
+
+#ifndef STDC
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const       /* note: need a more gentle solution here */
+#  endif
+#endif
+
+#if defined(ZLIB_CONST) && !defined(z_const)
+#  define z_const const
+#else
+#  define z_const
+#endif
+
+#ifdef Z_SOLO
+   typedef unsigned long z_size_t;
+#else
+#  define z_longlong long long
+#  if defined(NO_SIZE_T)
+     typedef unsigned NO_SIZE_T z_size_t;
+#  elif defined(STDC)
+#    include <stddef.h>
+     typedef size_t z_size_t;
+#  else
+     typedef unsigned long z_size_t;
+#  endif
+#  undef z_longlong
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+#ifndef Z_ARG /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define Z_ARG(args)  args
+#  else
+#    define Z_ARG(args)  ()
+#  endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+#  if defined(M_I86SM) || defined(M_I86MM)
+     /* MSC small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef _MSC_VER
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#  if (defined(__SMALL__) || defined(__MEDIUM__))
+     /* Turbo C small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef __BORLANDC__
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+   /* If building or using zlib as a DLL, define ZLIB_DLL.
+    * This is not mandatory, but it offers a little performance increase.
+    */
+#  ifdef ZLIB_DLL
+#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+#      ifdef ZLIB_INTERNAL
+#        define ZEXTERN extern __declspec(dllexport)
+#      else
+#        define ZEXTERN extern __declspec(dllimport)
+#      endif
+#    endif
+#  endif  /* ZLIB_DLL */
+   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+    * define ZLIB_WINAPI.
+    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+    */
+#  ifdef ZLIB_WINAPI
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+     /* No need for _export, use ZLIB.DEF instead. */
+     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+#    define ZEXPORT WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA WINAPIV
+#    else
+#      define ZEXPORTVA FAR CDECL
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  ifdef ZLIB_DLL
+#    ifdef ZLIB_INTERNAL
+#      define ZEXPORT   __declspec(dllexport)
+#      define ZEXPORTVA __declspec(dllexport)
+#    else
+#      define ZEXPORT   __declspec(dllimport)
+#      define ZEXPORTVA __declspec(dllimport)
+#    endif
+#  endif
+#endif
+
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
+
+#ifndef FAR
+#  define FAR
+#endif
+#ifndef far
+#  define far
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char  Byte;  /* 8 bits */
+#endif
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+#  define Bytef Byte FAR
+#else
+   typedef Byte  FAR Bytef;
+#endif
+typedef char  FAR charf;
+typedef int   FAR intf;
+typedef uInt  FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+   typedef void const *voidpc;
+   typedef void FAR   *voidpf;
+   typedef void       *voidp;
+#else
+   typedef Byte const *voidpc;
+   typedef Byte FAR   *voidpf;
+   typedef Byte       *voidp;
+#endif
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+#  include <limits.h>
+#  if (UINT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned
+#  elif (ULONG_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned long
+#  elif (USHRT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned short
+#  endif
+#endif
+
+#ifdef Z_U4
+   typedef Z_U4 z_crc_t;
+#else
+   typedef unsigned long z_crc_t;
+#endif
+
+#if !defined(_WIN32)
+#  define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+#  ifndef Z_SOLO
+#    include <sys/types.h>      /* for off_t */
+#  endif
+#endif
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifndef Z_SOLO
+#    include <stdarg.h>         /* for va_list */
+#  endif
+#endif
+
+#ifdef _WIN32
+#  ifndef Z_SOLO
+#    include <stddef.h>         /* for wchar_t */
+#  endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+#  define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+#  if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+#    ifdef VMS
+#      include <unixio.h>       /* for off_t */
+#    endif
+#    ifndef z_off_t
+#      define z_off_t off_t
+#    endif
+#  endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+#  define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+#  define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
+#endif
+
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+
+#ifndef z_off_t
+#  define z_off_t long
+#endif
+
+#if !defined(_WIN32) && defined(Z_LARGE64)
+#  define z_off64_t off64_t
+#else
+#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+#    define z_off64_t __int64
+#  else
+#    define z_off64_t z_off_t
+#  endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+  #pragma map(deflateInit_,"DEIN")
+  #pragma map(deflateInit2_,"DEIN2")
+  #pragma map(deflateEnd,"DEEND")
+  #pragma map(deflateBound,"DEBND")
+  #pragma map(inflateInit_,"ININ")
+  #pragma map(inflateInit2_,"ININ2")
+  #pragma map(inflateEnd,"INEND")
+  #pragma map(inflateSync,"INSY")
+  #pragma map(inflateSetDictionary,"INSEDI")
+  #pragma map(compressBound,"CMBND")
+  #pragma map(inflate_table,"INTABL")
+  #pragma map(inflate_fast,"INFA")
+  #pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
diff --git a/sysroots/x86_64-linux-musl/include/zlib.h b/sysroots/x86_64-linux-musl/include/zlib.h
new file mode 100644
index 0000000..ad6994f
--- /dev/null
+++ b/sysroots/x86_64-linux-musl/include/zlib.h
@@ -0,0 +1,2028 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+  version 1.2.12, March 11th, 2022
+
+  Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
+  (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
+*/
+
+#ifndef ZLIB_H
+#define ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.2.12"
+#define ZLIB_VERNUM 0x12c0
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 12
+#define ZLIB_VER_SUBREVISION 0
+
+/*
+ * In Android's NDK we have one zlib.h for all the versions.
+ * zlib users tend to use ZLIB_VERNUM to check API availability,
+ * so we need to translate __ANDROID_API__ appropriately.
+ *
+ * ZLIB_1.2.7.1 and ZLIB_1.2.9 are the only API changes in the NDK's
+ * supported range of API levels.
+ *
+ * jb-mr2-dev (18): 1.2.7 (but not 1.2.7.1, where the APIs were added!)
+ * https://android.googlesource.com/platform/external/zlib/+/refs/heads/jb-mr2-dev/src/zlib.h
+ * kitkat-dev (19): 1.2.8
+ * https://android.googlesource.com/platform/external/zlib/+/refs/heads/kitkat-dev/src/zlib.h
+ *
+ * oreo-mr1-dev (27): 1.2.8
+ * https://android.googlesource.com/platform/external/zlib/+/refs/heads/oreo-mr1-dev/src/zlib.h
+ * pie-dev (28): 1.2.11
+ * https://android.googlesource.com/platform/external/zlib/+/refs/heads/pie-dev/src/zlib.h
+ *
+ * So:
+ *  >= 28 --> 1.2.11
+ *  >= 19 --> 1.2.8
+ *   < 19 --> 1.2.7
+ */
+#if defined(__ANDROID__)
+#  if __ANDROID_API__ >= 28
+     /* Already okay. */
+#  elif __ANDROID_API__ >= 19
+#    undef ZLIB_VERSION
+#    define ZLIB_VERSION "1.2.8"
+#    undef ZLIB_VERNUM
+#    define ZLIB_VERNUM 0x1280
+#    undef ZLIB_VER_REVISION
+#    define ZLIB_VER_REVISION 8
+#  else
+#    undef ZLIB_VERSION
+#    define ZLIB_VERSION "1.2.6"
+#    undef ZLIB_VERNUM
+#    define ZLIB_VERNUM 0x1260
+#    undef ZLIB_VER_REVISION
+#    define ZLIB_VER_REVISION 6
+#  endif
+#endif
+
+/*
+    The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed data.
+  This version of the library supports only one compression method (deflation)
+  but other algorithms will be added later and will have the same stream
+  interface.
+
+    Compression can be done in a single step if the buffers are large enough,
+  or can be done by repeated calls of the compression function.  In the latter
+  case, the application must provide more input and/or consume the output
+  (providing more output space) before each call.
+
+    The compressed data format used by default by the in-memory functions is
+  the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+  around a deflate stream, which is itself documented in RFC 1951.
+
+    The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio using the functions that start
+  with "gz".  The gzip format is different from the zlib format.  gzip is a
+  gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+    This library can optionally read and write gzip and raw deflate streams in
+  memory as well.
+
+    The zlib format was designed to be compact and fast for use in memory
+  and on communications channels.  The gzip format was designed for single-
+  file compression on file systems, has a larger header than zlib to maintain
+  directory information, and uses a different, slower check method than zlib.
+
+    The library does not install any signal handler.  The decoder checks
+  the consistency of the compressed data, so the library should never crash
+  even in the case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+    z_const Bytef *next_in;     /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total number of input bytes read so far */
+
+    Bytef    *next_out; /* next output byte will go here */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total number of bytes output so far */
+
+    z_const char *msg;  /* last error message, NULL if no error */
+    struct internal_state FAR *state; /* not visible by applications */
+
+    alloc_func zalloc;  /* used to allocate the internal state */
+    free_func  zfree;   /* used to free the internal state */
+    voidpf     opaque;  /* private data object passed to zalloc and zfree */
+
+    int     data_type;  /* best guess about the data type: binary or text
+                           for deflate, or the decoding state for inflate */
+    uLong   adler;      /* Adler-32 or CRC-32 value of the uncompressed data */
+    uLong   reserved;   /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+     gzip header information passed to and from zlib routines.  See RFC 1952
+  for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+    int     text;       /* true if compressed data believed to be text */
+    uLong   time;       /* modification time */
+    int     xflags;     /* extra flags (not used when writing a gzip file) */
+    int     os;         /* operating system */
+    Bytef   *extra;     /* pointer to extra field or Z_NULL if none */
+    uInt    extra_len;  /* extra field length (valid if extra != Z_NULL) */
+    uInt    extra_max;  /* space at extra (only when reading header) */
+    Bytef   *name;      /* pointer to zero-terminated file name or Z_NULL */
+    uInt    name_max;   /* space at name (only when reading header) */
+    Bytef   *comment;   /* pointer to zero-terminated comment or Z_NULL */
+    uInt    comm_max;   /* space at comment (only when reading header) */
+    int     hcrc;       /* true if there was or will be a header crc */
+    int     done;       /* true when done reading gzip header (not used
+                           when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
+
+/*
+     The application must update next_in and avail_in when avail_in has dropped
+   to zero.  It must update next_out and avail_out when avail_out has dropped
+   to zero.  The application must initialize zalloc, zfree and opaque before
+   calling the init function.  All other fields are set by the compression
+   library and must not be updated by the application.
+
+     The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree.  This can be useful for custom
+   memory management.  The compression library attaches no meaning to the
+   opaque value.
+
+     zalloc must return Z_NULL if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, zalloc and zfree must be
+   thread safe.  In that case, zlib is thread-safe.  When zalloc and zfree are
+   Z_NULL on entry to the initialization function, they are set to internal
+   routines that use the standard library functions malloc() and free().
+
+     On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this if
+   the symbol MAXSEG_64K is defined (see zconf.h).  WARNING: On MSDOS, pointers
+   returned by zalloc for objects of exactly 65536 bytes *must* have their
+   offset normalized to zero.  The default allocation function provided by this
+   library ensures this (see zutil.c).  To reduce memory requirements and avoid
+   any allocation of 64K objects, at the expense of compression ratio, compile
+   the library with -DMAX_WBITS=14 (see zconf.h).
+
+     The fields total_in and total_out can be used for statistics or progress
+   reports.  After compression, total_in holds the total size of the
+   uncompressed data and may be saved for use by the decompressor (particularly
+   if the decompressor wants to decompress everything in a single step).
+*/
+
+                        /* constants */
+
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1
+#define Z_SYNC_FLUSH    2
+#define Z_FULL_FLUSH    3
+#define Z_FINISH        4
+#define Z_BLOCK         5
+#define Z_TREES         6
+/* Allowed flush values; see deflate() and inflate() below for details */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_NEED_DICT     2
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION         0
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_RLE                 3
+#define Z_FIXED               4
+#define Z_DEFAULT_STRATEGY    0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY   0
+#define Z_TEXT     1
+#define Z_ASCII    Z_TEXT   /* for compatibility with 1.2.2 and earlier */
+#define Z_UNKNOWN  2
+/* Possible values of the data_type field for deflate() */
+
+#define Z_DEFLATED   8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+
+                        /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is not
+   compatible with the zlib.h header file used by the application.  This check
+   is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+     Initializes the internal stream state for compression.  The fields
+   zalloc, zfree and opaque must be initialized before by the caller.  If
+   zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+   allocation functions.
+
+     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+   1 gives best speed, 9 gives best compression, 0 gives no compression at all
+   (the input data is simply copied a block at a time).  Z_DEFAULT_COMPRESSION
+   requests a default compromise between speed and compression (currently
+   equivalent to level 6).
+
+     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if level is not a valid compression level, or
+   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+   with the version assumed by the caller (ZLIB_VERSION).  msg is set to null
+   if there is no error message.  deflateInit does not perform any compression:
+   this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+    deflate compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
+
+    The detailed semantics are as follows.  deflate performs one or both of the
+  following actions:
+
+  - Compress more input starting at next_in and update next_in and avail_in
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), next_in and avail_in are updated and
+    processing will resume at this point for the next call of deflate().
+
+  - Generate more output starting at next_out and update next_out and avail_out
+    accordingly.  This action is forced if the parameter flush is non zero.
+    Forcing flush frequently degrades the compression ratio, so this parameter
+    should be set only when necessary.  Some output may be provided even if
+    flush is zero.
+
+    Before the call of deflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating avail_in or avail_out accordingly; avail_out should
+  never be zero before the call.  The application can consume the compressed
+  output when it wants, for example when the output buffer is full (avail_out
+  == 0), or after each call of deflate().  If deflate returns Z_OK and with
+  zero avail_out, it must be called again after making room in the output
+  buffer because there might be more output pending. See deflatePending(),
+  which can be used if desired to determine whether or not there is more ouput
+  in that case.
+
+    Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+  decide how much data to accumulate before producing output, in order to
+  maximize compression.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far.  (In
+  particular avail_in is zero after the call if enough output space has been
+  provided before the call.) Flushing may degrade compression for some
+  compression algorithms and so it should be used only when necessary.  This
+  completes the current deflate block and follows it with an empty stored block
+  that is three bits plus filler bits to the next byte, followed by four bytes
+  (00 00 ff ff).
+
+    If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+  output buffer, but the output is not aligned to a byte boundary.  All of the
+  input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+  This completes the current deflate block and follows it with an empty fixed
+  codes block that is 10 bits long.  This assures that enough bytes are output
+  in order for the decompressor to finish the block before the empty fixed
+  codes block.
+
+    If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+  for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+  seven bits of the current block are held to be written as the next byte after
+  the next deflate block is completed.  In this case, the decompressor may not
+  be provided enough bits at this point in order to complete decompression of
+  the data provided so far to the compressor.  It may need to wait for the next
+  block to be emitted.  This is for advanced applications that need to control
+  the emission of deflate blocks.
+
+    If flush is set to Z_FULL_FLUSH, all output is flushed as with
+  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired.  Using Z_FULL_FLUSH too often can seriously degrade
+  compression.
+
+    If deflate returns with avail_out == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  avail_out), until the flush is complete (deflate returns with non-zero
+  avail_out).  In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+  avail_out is greater than six to avoid repeated flush markers due to
+  avail_out == 0 on return.
+
+    If the parameter flush is set to Z_FINISH, pending input is processed,
+  pending output is flushed and deflate returns with Z_STREAM_END if there was
+  enough output space.  If deflate returns with Z_OK or Z_BUF_ERROR, this
+  function must be called again with Z_FINISH and more output space (updated
+  avail_out) but no more input data, until it returns with Z_STREAM_END or an
+  error.  After deflate has returned Z_STREAM_END, the only possible operations
+  on the stream are deflateReset or deflateEnd.
+
+    Z_FINISH can be used in the first deflate call after deflateInit if all the
+  compression is to be done in a single step.  In order to complete in one
+  call, avail_out must be at least the value returned by deflateBound (see
+  below).  Then deflate is guaranteed to return Z_STREAM_END.  If not enough
+  output space is provided, deflate will not return Z_STREAM_END, and it must
+  be called again as described above.
+
+    deflate() sets strm->adler to the Adler-32 checksum of all input read
+  so far (that is, total_in bytes).  If a gzip stream is being generated, then
+  strm->adler will be the CRC-32 checksum of the input read so far.  (See
+  deflateInit2 below.)
+
+    deflate() may update strm->data_type if it can make a good guess about
+  the input data type (Z_BINARY or Z_TEXT).  If in doubt, the data is
+  considered binary.  This field is only for information purposes and does not
+  affect the compression algorithm in any manner.
+
+    deflate() returns Z_OK if some progress has been made (more input
+  processed or more output produced), Z_STREAM_END if all input has been
+  consumed and all output has been produced (only when flush is set to
+  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+  if next_in or next_out was Z_NULL or the state was inadvertently written over
+  by the application), or Z_BUF_ERROR if no progress is possible (for example
+  avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not fatal, and
+  deflate() can be called again with more input and more output space to
+  continue compressing.
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any pending
+   output.
+
+     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+   prematurely (some input or output was discarded).  In the error case, msg
+   may be set but then points to a static string (which must not be
+   deallocated).
+*/
+
+
+/*
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+     Initializes the internal stream state for decompression.  The fields
+   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+   the caller.  In the current version of inflate, the provided input is not
+   read or consumed.  The allocation of a sliding window will be deferred to
+   the first call of inflate (if the decompression does not complete on the
+   first call).  If zalloc and zfree are set to Z_NULL, inflateInit updates
+   them to use default allocation functions.
+
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit does not perform any decompression.
+   Actual decompression will be done by inflate().  So next_in, and avail_in,
+   next_out, and avail_out are unused and unchanged.  The current
+   implementation of inflateInit() does not process any header information --
+   that is deferred until inflate() is called.
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+    inflate decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
+
+  The detailed semantics are as follows.  inflate performs one or both of the
+  following actions:
+
+  - Decompress more input starting at next_in and update next_in and avail_in
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), then next_in and avail_in are updated
+    accordingly, and processing will resume at this point for the next call of
+    inflate().
+
+  - Generate more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() provides as much output as possible, until there is
+    no more input data or no more space in the output buffer (see below about
+    the flush parameter).
+
+    Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating the next_* and avail_* values accordingly.  If the
+  caller of inflate() does not provide both available input and available
+  output space, it is possible that there will be no progress made.  The
+  application can consume the uncompressed output when it wants, for example
+  when the output buffer is full (avail_out == 0), or after each call of
+  inflate().  If inflate returns Z_OK and with zero avail_out, it must be
+  called again after making room in the output buffer because there might be
+  more output pending.
+
+    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+  Z_BLOCK, or Z_TREES.  Z_SYNC_FLUSH requests that inflate() flush as much
+  output as possible to the output buffer.  Z_BLOCK requests that inflate()
+  stop if and when it gets to the next deflate block boundary.  When decoding
+  the zlib or gzip format, this will cause inflate() to return immediately
+  after the header and before the first block.  When doing a raw inflate,
+  inflate() will go ahead and process the first block, and will return when it
+  gets to the end of that block, or when it runs out of data.
+
+    The Z_BLOCK option assists in appending to or combining deflate streams.
+  To assist in this, on return inflate() always sets strm->data_type to the
+  number of unused bits in the last byte taken from strm->next_in, plus 64 if
+  inflate() is currently decoding the last block in the deflate stream, plus
+  128 if inflate() returned immediately after decoding an end-of-block code or
+  decoding the complete header up to just before the first byte of the deflate
+  stream.  The end-of-block will not be indicated until all of the uncompressed
+  data from that block has been written to strm->next_out.  The number of
+  unused bits may in general be greater than seven, except when bit 7 of
+  data_type is set, in which case the number of unused bits will be less than
+  eight.  data_type is set as noted here every time inflate() returns for all
+  flush options, and so can be used to determine the amount of currently
+  consumed input in bits.
+
+    The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+  end of each deflate block header is reached, before any actual data in that
+  block is decoded.  This allows the caller to determine the length of the
+  deflate block header for later use in random access within a deflate block.
+  256 is added to the value of strm->data_type when inflate() returns
+  immediately after reaching the end of the deflate block header.
+
+    inflate() should normally be called until it returns Z_STREAM_END or an
+  error.  However if all decompression is to be performed in a single step (a
+  single call of inflate), the parameter flush should be set to Z_FINISH.  In
+  this case all pending input is processed and all pending output is flushed;
+  avail_out must be large enough to hold all of the uncompressed data for the
+  operation to complete.  (The size of the uncompressed data may have been
+  saved by the compressor for this purpose.)  The use of Z_FINISH is not
+  required to perform an inflation in one step.  However it may be used to
+  inform inflate that a faster approach can be used for the single inflate()
+  call.  Z_FINISH also informs inflate to not maintain a sliding window if the
+  stream completes, which reduces inflate's memory footprint.  If the stream
+  does not complete, either because not all of the stream is provided or not
+  enough output space is provided, then a sliding window will be allocated and
+  inflate() can be called again to continue the operation as if Z_NO_FLUSH had
+  been used.
+
+     In this implementation, inflate() always flushes as much output as
+  possible to the output buffer, and always uses the faster approach on the
+  first call.  So the effects of the flush parameter in this implementation are
+  on the return value of inflate() as noted below, when inflate() returns early
+  when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
+  memory for a sliding window when Z_FINISH is used.
+
+     If a preset dictionary is needed after this call (see inflateSetDictionary
+  below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
+  chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+  strm->adler to the Adler-32 checksum of all output produced so far (that is,
+  total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+  below.  At the end of the stream, inflate() checks that its computed Adler-32
+  checksum is equal to that saved by the compressor and returns Z_STREAM_END
+  only if the checksum is correct.
+
+    inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+  deflate data.  The header type is detected automatically, if requested when
+  initializing with inflateInit2().  Any information contained in the gzip
+  header is not retained unless inflateGetHeader() is used.  When processing
+  gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
+  produced so far.  The CRC-32 is checked against the gzip trailer, as is the
+  uncompressed length, modulo 2^32.
+
+    inflate() returns Z_OK if some progress has been made (more input processed
+  or more output produced), Z_STREAM_END if the end of the compressed data has
+  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect check
+  value, in which case strm->msg points to a string with a more specific
+  error), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+  next_in or next_out was Z_NULL, or the state was inadvertently written over
+  by the application), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR
+  if no progress was possible or if there was not enough room in the output
+  buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
+  inflate() can be called again with more input and more output space to
+  continue decompressing.  If Z_DATA_ERROR is returned, the application may
+  then call inflateSync() to look for a good compression block if a partial
+  recovery of the data is to be attempted.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any pending
+   output.
+
+     inflateEnd returns Z_OK if success, or Z_STREAM_ERROR if the stream state
+   was inconsistent.
+*/
+
+
+                        /* Advanced functions */
+
+/*
+    The following functions are needed only in some special applications.
+*/
+
+/*
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+                                     int  level,
+                                     int  method,
+                                     int  windowBits,
+                                     int  memLevel,
+                                     int  strategy));
+
+     This is another version of deflateInit with more compression options.  The
+   fields zalloc, zfree and opaque must be initialized before by the caller.
+
+     The method parameter is the compression method.  It must be Z_DEFLATED in
+   this version of the library.
+
+     The windowBits parameter is the base two logarithm of the window size
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library.  Larger values of this parameter result in better
+   compression at the expense of memory usage.  The default value is 15 if
+   deflateInit is used instead.
+
+     For the current implementation of deflate(), a windowBits value of 8 (a
+   window size of 256 bytes) is not supported.  As a result, a request for 8
+   will result in 9 (a 512-byte window).  In that case, providing 8 to
+   inflateInit2() will result in an error when the zlib header with 9 is
+   checked against the initialization of inflate().  The remedy is to not use 8
+   with deflateInit2() with this initialization, or at least in that case use 9
+   with inflateInit2().
+
+     windowBits can also be -8..-15 for raw deflate.  In this case, -windowBits
+   determines the window size.  deflate() will then generate raw deflate data
+   with no zlib header or trailer, and will not compute a check value.
+
+     windowBits can also be greater than 15 for optional gzip encoding.  Add
+   16 to windowBits to write a simple gzip header and trailer around the
+   compressed data instead of a zlib wrapper.  The gzip header will have no
+   file name, no extra data, no comment, no modification time (set to zero), no
+   header crc, and the operating system will be set to the appropriate value,
+   if the operating system was determined at compile time.  If a gzip stream is
+   being written, strm->adler is a CRC-32 instead of an Adler-32.
+
+     For raw deflate or gzip encoding, a request for a 256-byte window is
+   rejected as invalid, since only the zlib header provides a means of
+   transmitting the window size to the decompressor.
+
+     The memLevel parameter specifies how much memory should be allocated
+   for the internal compression state.  memLevel=1 uses minimum memory but is
+   slow and reduces compression ratio; memLevel=9 uses maximum memory for
+   optimal speed.  The default value is 8.  See zconf.h for total memory usage
+   as a function of windowBits and memLevel.
+
+     The strategy parameter is used to tune the compression algorithm.  Use the
+   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+   filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+   string match), or Z_RLE to limit match distances to one (run-length
+   encoding).  Filtered data consists mostly of small values with a somewhat
+   random distribution.  In this case, the compression algorithm is tuned to
+   compress them better.  The effect of Z_FILTERED is to force more Huffman
+   coding and less string matching; it is somewhat intermediate between
+   Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY.  Z_RLE is designed to be almost as
+   fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data.  The
+   strategy parameter only affects the compression ratio but not the
+   correctness of the compressed output even if it is not set appropriately.
+   Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+   decoder for special applications.
+
+     deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+   method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+   incompatible with the version assumed by the caller (ZLIB_VERSION).  msg is
+   set to null if there is no error message.  deflateInit2 does not perform any
+   compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output.  When using the zlib format, this
+   function must be called immediately after deflateInit, deflateInit2 or
+   deflateReset, and before any call of deflate.  When doing raw deflate, this
+   function must be called either before any call of deflate, or immediately
+   after the completion of a deflate block, i.e. after all input has been
+   consumed and all output has been delivered when using any of the flush
+   options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH.  The
+   compressor and decompressor must use exactly the same dictionary (see
+   inflateSetDictionary).
+
+     The dictionary should consist of strings (byte sequences) that are likely
+   to be encountered later in the data to be compressed, with the most commonly
+   used strings preferably put towards the end of the dictionary.  Using a
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy; the data can then be compressed better than
+   with the default empty dictionary.
+
+     Depending on the size of the compression data structures selected by
+   deflateInit or deflateInit2, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size
+   provided in deflateInit or deflateInit2.  Thus the strings most likely to be
+   useful should be put at the end of the dictionary, not at the front.  In
+   addition, the current implementation of deflate will use at most the window
+   size minus 262 bytes of the provided dictionary.
+
+     Upon return of this function, strm->adler is set to the Adler-32 value
+   of the dictionary; the decompressor may later use this value to determine
+   which dictionary has been used by the compressor.  (The Adler-32 value
+   applies to the whole dictionary even if only a subset of the dictionary is
+   actually used by the compressor.) If a raw deflate was requested, then the
+   Adler-32 value is not computed and strm->adler is not set.
+
+     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
+   inconsistent (for example if deflate has already been called for this stream
+   or if not at a block boundary for raw deflate).  deflateSetDictionary does
+   not perform any compression: this will be done by deflate().
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN int ZEXPORT deflateGetDictionary OF((z_streamp strm,
+                                             Bytef *dictionary,
+                                             uInt  *dictLength));
+#endif
+/*
+     Returns the sliding dictionary being maintained by deflate.  dictLength is
+   set to the number of bytes in the dictionary, and that many bytes are copied
+   to dictionary.  dictionary must have enough space, where 32768 bytes is
+   always enough.  If deflateGetDictionary() is called with dictionary equal to
+   Z_NULL, then only the dictionary length is returned, and nothing is copied.
+   Similary, if dictLength is Z_NULL, then it is not set.
+
+     deflateGetDictionary() may return a length less than the window size, even
+   when more than the window size in input has been provided. It may return up
+   to 258 bytes less in that case, due to how zlib's implementation of deflate
+   manages the sliding window and lookahead for matches, where matches can be
+   up to 258 bytes long. If the application needs the last window-size bytes of
+   input, then that would need to be saved by the application outside of zlib.
+
+     deflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+   stream state is inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when several compression strategies will be
+   tried, for example when there are several ways of pre-processing the input
+   data with a filter.  The streams that will be discarded should then be freed
+   by calling deflateEnd.  Note that deflateCopy duplicates the internal
+   compression state which can be quite large, so this strategy is slow and can
+   consume lots of memory.
+
+     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to deflateEnd followed by deflateInit, but
+   does not free and reallocate the internal compression state.  The stream
+   will leave the compression level and any other attributes that may have been
+   set unchanged.
+
+     deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+                                      int level,
+                                      int strategy));
+/*
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in deflateInit2().  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different strategy.
+   If the compression approach (which is a function of the level) or the
+   strategy is changed, and if there have been any deflate() calls since the
+   state was initialized or reset, then the input available so far is
+   compressed with the old level and strategy using deflate(strm, Z_BLOCK).
+   There are three approaches for the compression levels 0, 1..3, and 4..9
+   respectively.  The new level and strategy will take effect at the next call
+   of deflate().
+
+     If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
+   not have enough output space to complete, then the parameter change will not
+   take effect.  In this case, deflateParams() can be called again with the
+   same parameters and more output space to try again.
+
+     In order to assure a change in the parameters on the first try, the
+   deflate stream should be flushed using deflate() with Z_BLOCK or other flush
+   request until strm.avail_out is not zero, before calling deflateParams().
+   Then no more input data should be provided before the deflateParams() call.
+   If this is done, the old level and strategy will be applied to the data
+   compressed before deflateParams(), and the new level and strategy will be
+   applied to the the data compressed after deflateParams().
+
+     deflateParams returns Z_OK on success, Z_STREAM_ERROR if the source stream
+   state was inconsistent or if a parameter was invalid, or Z_BUF_ERROR if
+   there was not enough output space to complete the compression of the
+   available input data before a change in the strategy or approach.  Note that
+   in the case of a Z_BUF_ERROR, the parameters are not changed.  A return
+   value of Z_BUF_ERROR is not fatal, in which case deflateParams() can be
+   retried with more output space.
+*/
+
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+                                    int good_length,
+                                    int max_lazy,
+                                    int nice_length,
+                                    int max_chain));
+/*
+     Fine tune deflate's internal compression parameters.  This should only be
+   used by someone who understands the algorithm used by zlib's deflate for
+   searching for the best matching string, and even then only by the most
+   fanatic optimizer trying to squeeze out the last compressed bit for their
+   specific input data.  Read the deflate.c source code for the meaning of the
+   max_lazy, good_length, nice_length, and max_chain parameters.
+
+     deflateTune() can be called after deflateInit() or deflateInit2(), and
+   returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+                                       uLong sourceLen));
+/*
+     deflateBound() returns an upper bound on the compressed size after
+   deflation of sourceLen bytes.  It must be called after deflateInit() or
+   deflateInit2(), and after deflateSetHeader(), if used.  This would be used
+   to allocate an output buffer for deflation in a single pass, and so would be
+   called before deflate().  If that first deflate() call is provided the
+   sourceLen input bytes, an output buffer allocated to the size returned by
+   deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
+   to return Z_STREAM_END.  Note that it is possible for the compressed size to
+   be larger than the value returned by deflateBound() if flush options other
+   than Z_FINISH or Z_NO_FLUSH are used.
+*/
+
+ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
+                                       unsigned *pending,
+                                       int *bits));
+/*
+     deflatePending() returns the number of bytes and bits of output that have
+   been generated, but not yet provided in the available output.  The bytes not
+   provided would be due to the available output space having being consumed.
+   The number of bits of output not provided are between 0 and 7, where they
+   await more bits to join them in order to fill out a full byte.  If pending
+   or bits are Z_NULL, then those values are not set.
+
+     deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+ */
+
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     deflatePrime() inserts bits in the deflate output stream.  The intent
+   is that this function is used to start off the deflate output with the bits
+   leftover from a previous deflate stream when appending to it.  As such, this
+   function can only be used for raw deflate, and must be used before the first
+   deflate() call after a deflateInit2() or deflateReset().  bits must be less
+   than or equal to 16, and that many of the least significant bits of value
+   will be inserted in the output.
+
+     deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
+   room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
+   source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     deflateSetHeader() provides gzip header information for when a gzip
+   stream is requested by deflateInit2().  deflateSetHeader() may be called
+   after deflateInit2() or deflateReset() and before the first call of
+   deflate().  The text, time, os, extra field, name, and comment information
+   in the provided gz_header structure are written to the gzip header (xflag is
+   ignored -- the extra flags are set according to the compression level).  The
+   caller must assure that, if not Z_NULL, name and comment are terminated with
+   a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+   available there.  If hcrc is true, a gzip header crc is included.  Note that
+   the current versions of the command-line version of gzip (up through version
+   1.3.x) do not support header crc's, and will report that it is a "multi-part
+   gzip file" and give up.
+
+     If deflateSetHeader is not used, the default gzip header has text false,
+   the time set to zero, and os set to 255, with no extra, name, or comment
+   fields.  The gzip header is returned to the default state by deflateReset().
+
+     deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+                                     int  windowBits));
+
+     This is another version of inflateInit with an extra parameter.  The
+   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+   before by the caller.
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library.  The default value is 15 if inflateInit is used
+   instead.  windowBits must be greater than or equal to the windowBits value
+   provided to deflateInit2() while compressing, or it must be equal to 15 if
+   deflateInit2() was not used.  If a compressed stream with a larger window
+   size is given as input, inflate() will return with the error code
+   Z_DATA_ERROR instead of trying to allocate a larger window.
+
+     windowBits can also be zero to request that inflate use the window size in
+   the zlib header of the compressed stream.
+
+     windowBits can also be -8..-15 for raw inflate.  In this case, -windowBits
+   determines the window size.  inflate() will then process raw deflate data,
+   not looking for a zlib or gzip header, not generating a check value, and not
+   looking for any check values for comparison at the end of the stream.  This
+   is for use with other formats that use the deflate compressed data format
+   such as zip.  Those formats provide their own check values.  If a custom
+   format is developed using the raw deflate format for compressed data, it is
+   recommended that a check value such as an Adler-32 or a CRC-32 be applied to
+   the uncompressed data as is done in the zlib, gzip, and zip formats.  For
+   most applications, the zlib format should be used as is.  Note that comments
+   above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+     windowBits can also be greater than 15 for optional gzip decoding.  Add
+   32 to windowBits to enable zlib and gzip decoding with automatic header
+   detection, or add 16 to decode only the gzip format (the zlib format will
+   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is a
+   CRC-32 instead of an Adler-32.  Unlike the gunzip utility and gzread() (see
+   below), inflate() will *not* automatically decode concatenated gzip members.
+   inflate() will return Z_STREAM_END at the end of the gzip member.  The state
+   would need to be reset to continue decoding a subsequent gzip member.  This
+   *must* be done if there is more data after a gzip member, in order for the
+   decompression to be compliant with the gzip standard (RFC 1952).
+
+     inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit2 does not perform any decompression
+   apart from possibly reading the zlib header if present: actual decompression
+   will be done by inflate().  (So next_in and avail_in may be modified, but
+   next_out and avail_out are unused and unchanged.) The current implementation
+   of inflateInit2() does not process any header information -- that is
+   deferred until inflate() is called.
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence.  This function must be called immediately after a call of inflate,
+   if that call returned Z_NEED_DICT.  The dictionary chosen by the compressor
+   can be determined from the Adler-32 value returned by that call of inflate.
+   The compressor and decompressor must use exactly the same dictionary (see
+   deflateSetDictionary).  For raw inflate, this function can be called at any
+   time to set the dictionary.  If the provided dictionary is smaller than the
+   window and there is already data in the window, then the provided dictionary
+   will amend what's there.  The application must insure that the dictionary
+   that was used for compression is provided.
+
+     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
+   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+   expected one (incorrect Adler-32 value).  inflateSetDictionary does not
+   perform any decompression: this will be done by subsequent calls of
+   inflate().
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 19
+ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
+                                             Bytef *dictionary,
+                                             uInt  *dictLength));
+#endif
+/*
+     Returns the sliding dictionary being maintained by inflate.  dictLength is
+   set to the number of bytes in the dictionary, and that many bytes are copied
+   to dictionary.  dictionary must have enough space, where 32768 bytes is
+   always enough.  If inflateGetDictionary() is called with dictionary equal to
+   Z_NULL, then only the dictionary length is returned, and nothing is copied.
+   Similary, if dictLength is Z_NULL, then it is not set.
+
+     inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+   stream state is inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/*
+     Skips invalid compressed data until a possible full flush point (see above
+   for the description of deflate with Z_FULL_FLUSH) can be found, or until all
+   available input is skipped.  No output is provided.
+
+     inflateSync searches for a 00 00 FF FF pattern in the compressed data.
+   All full flush points have this pattern, but not all occurrences of this
+   pattern are full flush points.
+
+     inflateSync returns Z_OK if a possible full flush point has been found,
+   Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
+   has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
+   In the success case, the application may save the current current value of
+   total_in which indicates where valid compressed data was found.  In the
+   error case, the application may repeatedly call inflateSync, providing more
+   input each time, until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when randomly accessing a large stream.  The
+   first pass through the stream can periodically record the inflate state,
+   allowing restarting inflate at those points when randomly accessing the
+   stream.
+
+     inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to inflateEnd followed by inflateInit,
+   but does not free and reallocate the internal decompression state.  The
+   stream will keep attributes that may have been set by inflateInit2.
+
+     inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+                                      int windowBits));
+/*
+     This function is the same as inflateReset, but it also permits changing
+   the wrap and window size requests.  The windowBits parameter is interpreted
+   the same as it is for inflateInit2.  If the window size is changed, then the
+   memory allocated for the window is freed, and the window will be reallocated
+   by inflate() if needed.
+
+     inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+   the windowBits parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     This function inserts bits in the inflate input stream.  The intent is
+   that this function is used to start inflating at a bit position in the
+   middle of a byte.  The provided bits will be used before any bytes are used
+   from next_in.  This function should only be used with raw inflate, and
+   should be used before the first inflate() call after inflateInit2() or
+   inflateReset().  bits must be less than or equal to 16, and that many of the
+   least significant bits of value will be inserted in the input.
+
+     If bits is negative, then the input stream bit buffer is emptied.  Then
+   inflatePrime() can be called again to put bits in the buffer.  This is used
+   to clear out bits leftover after feeding inflate a block description prior
+   to feeding inflate codes.
+
+     inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+     This function returns two values, one in the lower 16 bits of the return
+   value, and the other in the remaining upper bits, obtained by shifting the
+   return value down 16 bits.  If the upper value is -1 and the lower value is
+   zero, then inflate() is currently decoding information outside of a block.
+   If the upper value is -1 and the lower value is non-zero, then inflate is in
+   the middle of a stored block, with the lower value equaling the number of
+   bytes from the input remaining to copy.  If the upper value is not -1, then
+   it is the number of bits back from the current bit position in the input of
+   the code (literal or length/distance pair) currently being processed.  In
+   that case the lower value is the number of bytes already emitted for that
+   code.
+
+     A code is being processed if inflate is waiting for more input to complete
+   decoding of the code, or if it has completed decoding but is waiting for
+   more output space to write the literal or match data.
+
+     inflateMark() is used to mark locations in the input data for random
+   access, which may be at bit positions, and to note those cases where the
+   output of a code may span boundaries of random access blocks.  The current
+   location in the input stream can be determined from avail_in and data_type
+   as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+     inflateMark returns the value noted above, or -65536 if the provided
+   source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     inflateGetHeader() requests that gzip header information be stored in the
+   provided gz_header structure.  inflateGetHeader() may be called after
+   inflateInit2() or inflateReset(), and before the first call of inflate().
+   As inflate() processes the gzip stream, head->done is zero until the header
+   is completed, at which time head->done is set to one.  If a zlib stream is
+   being decoded, then head->done is set to -1 to indicate that there will be
+   no gzip header information forthcoming.  Note that Z_BLOCK or Z_TREES can be
+   used to force inflate() to return immediately after header processing is
+   complete and before any actual data is decompressed.
+
+     The text, time, xflags, and os fields are filled in with the gzip header
+   contents.  hcrc is set to true if there is a header CRC.  (The header CRC
+   was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+   contains the maximum number of bytes to write to extra.  Once done is true,
+   extra_len contains the actual extra field length, and extra contains the
+   extra field, or that field truncated if extra_max is less than extra_len.
+   If name is not Z_NULL, then up to name_max characters are written there,
+   terminated with a zero unless the length is greater than name_max.  If
+   comment is not Z_NULL, then up to comm_max characters are written there,
+   terminated with a zero unless the length is greater than comm_max.  When any
+   of extra, name, or comment are not Z_NULL and the respective field is not
+   present in the header, then that field is set to Z_NULL to signal its
+   absence.  This allows the use of deflateSetHeader() with the returned
+   structure to duplicate the header.  However if those fields are set to
+   allocated memory, then the application will need to save those pointers
+   elsewhere so that they can be eventually freed.
+
+     If inflateGetHeader is not used, then the header information is simply
+   discarded.  The header is always checked for validity, including the header
+   CRC if present.  inflateReset() will reset the process to discard the header
+   information.  The application would need to call inflateGetHeader() again to
+   retrieve the header from the next gzip stream.
+
+     inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+                                        unsigned char FAR *window));
+
+     Initialize the internal stream state for decompression using inflateBack()
+   calls.  The fields zalloc, zfree and opaque in strm must be initialized
+   before the call.  If zalloc and zfree are Z_NULL, then the default library-
+   derived memory allocation routines are used.  windowBits is the base two
+   logarithm of the window size, in the range 8..15.  window is a caller
+   supplied buffer of that size.  Except for special applications where it is
+   assured that deflate was used with small window sizes, windowBits must be 15
+   and a 32K byte window must be supplied to be able to decompress general
+   deflate streams.
+
+     See inflateBack() for the usage of these routines.
+
+     inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+   the parameters are invalid, Z_MEM_ERROR if the internal state could not be
+   allocated, or Z_VERSION_ERROR if the version of the library does not match
+   the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *,
+                                z_const unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+                                    in_func in, void FAR *in_desc,
+                                    out_func out, void FAR *out_desc));
+/*
+     inflateBack() does a raw inflate with a single call using a call-back
+   interface for input and output.  This is potentially more efficient than
+   inflate() for file i/o applications, in that it avoids copying between the
+   output and the sliding window by simply making the window itself the output
+   buffer.  inflate() can be faster on modern CPUs when used with large
+   buffers.  inflateBack() trusts the application to not change the output
+   buffer passed by the output function, at least until inflateBack() returns.
+
+     inflateBackInit() must be called first to allocate the internal state
+   and to initialize the state with the user-provided window buffer.
+   inflateBack() may then be used multiple times to inflate a complete, raw
+   deflate stream with each call.  inflateBackEnd() is then called to free the
+   allocated state.
+
+     A raw deflate stream is one with no zlib or gzip header or trailer.
+   This routine would normally be used in a utility that reads zip or gzip
+   files and writes out uncompressed files.  The utility would decode the
+   header and process the trailer on its own, hence this routine expects only
+   the raw deflate stream to decompress.  This is different from the default
+   behavior of inflate(), which expects a zlib header and trailer around the
+   deflate stream.
+
+     inflateBack() uses two subroutines supplied by the caller that are then
+   called by inflateBack() for input and output.  inflateBack() calls those
+   routines until it reads a complete deflate stream and writes out all of the
+   uncompressed data, or until it encounters an error.  The function's
+   parameters and return types are defined above in the in_func and out_func
+   typedefs.  inflateBack() will call in(in_desc, &buf) which should return the
+   number of bytes of provided input, and a pointer to that input in buf.  If
+   there is no input available, in() must return zero -- buf is ignored in that
+   case -- and inflateBack() will return a buffer error.  inflateBack() will
+   call out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].
+   out() should return zero on success, or non-zero on failure.  If out()
+   returns non-zero, inflateBack() will return with an error.  Neither in() nor
+   out() are permitted to change the contents of the window provided to
+   inflateBackInit(), which is also the buffer that out() uses to write from.
+   The length written by out() will be at most the window size.  Any non-zero
+   amount of input may be provided by in().
+
+     For convenience, inflateBack() can be provided input on the first call by
+   setting strm->next_in and strm->avail_in.  If that input is exhausted, then
+   in() will be called.  Therefore strm->next_in must be initialized before
+   calling inflateBack().  If strm->next_in is Z_NULL, then in() will be called
+   immediately for input.  If strm->next_in is not Z_NULL, then strm->avail_in
+   must also be initialized, and then if strm->avail_in is not zero, input will
+   initially be taken from strm->next_in[0 ..  strm->avail_in - 1].
+
+     The in_desc and out_desc parameters of inflateBack() is passed as the
+   first parameter of in() and out() respectively when they are called.  These
+   descriptors can be optionally used to pass any information that the caller-
+   supplied in() and out() functions need to do their job.
+
+     On return, inflateBack() will set strm->next_in and strm->avail_in to
+   pass back any unused input that was provided by the last in() call.  The
+   return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+   if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+   in the deflate stream (in which case strm->msg is set to indicate the nature
+   of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+   In the case of Z_BUF_ERROR, an input or output error can be distinguished
+   using strm->next_in which will be Z_NULL only if in() returned an error.  If
+   strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+   non-zero.  (in() will always be called before out(), so strm->next_in is
+   assured to be defined if out() returns non-zero.)  Note that inflateBack()
+   cannot return Z_OK.
+*/
+
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+     All memory allocated by inflateBackInit() is freed.
+
+     inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+   state was inconsistent.
+*/
+
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+    Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+     1.0: size of uInt
+     3.2: size of uLong
+     5.4: size of voidpf (pointer)
+     7.6: size of z_off_t
+
+    Compiler, assembler, and debug options:
+     8: ZLIB_DEBUG
+     9: ASMV or ASMINF -- use ASM code
+     10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+     11: 0 (reserved)
+
+    One-time table building (smaller code, but not thread-safe if true):
+     12: BUILDFIXED -- build static block decoding tables when needed
+     13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+     14,15: 0 (reserved)
+
+    Library content (indicates missing functionality):
+     16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+                          deflate code when not needed)
+     17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+                    and decode gzip streams (to avoid linking crc code)
+     18-19: 0 (reserved)
+
+    Operation variations (changes in library functionality):
+     20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+     21: FASTEST -- deflate algorithm with only one, lowest compression level
+     22,23: 0 (reserved)
+
+    The sprintf variant used by gzprintf (zero is best):
+     24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+     25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+     26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+    Remainder:
+     27-31: 0 (reserved)
+ */
+
+#ifndef Z_SOLO
+
+                        /* utility functions */
+
+/*
+     The following utility functions are implemented on top of the basic
+   stream-oriented functions.  To simplify the interface, some default options
+   are assumed (compression level and memory usage, standard memory allocation
+   functions).  The source code of these utility functions can be modified if
+   you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
+                                 const Bytef *source, uLong sourceLen));
+/*
+     Compresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed data.  compress() is equivalent to compress2() with a level
+   parameter of Z_DEFAULT_COMPRESSION.
+
+     compress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
+                                  const Bytef *source, uLong sourceLen,
+                                  int level));
+/*
+     Compresses the source buffer into the destination buffer.  The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer.  Upon entry, destLen is the total size of the
+   destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed data.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+/*
+     compressBound() returns an upper bound on the compressed size after
+   compress() or compress2() on sourceLen bytes.  It would be used before a
+   compress() or compress2() call to allocate the destination buffer.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+                                   const Bytef *source, uLong sourceLen));
+/*
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be large enough to hold the entire
+   uncompressed data.  (The size of the uncompressed data must have been saved
+   previously by the compressor and transmitted to the decompressor by some
+   mechanism outside the scope of this compression library.) Upon exit, destLen
+   is the actual size of the uncompressed data.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.  In
+   the case where there is not enough room, uncompress() will fill the output
+   buffer with the uncompressed data up to that point.
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest,   uLongf *destLen,
+                                    const Bytef *source, uLong *sourceLen));
+#endif
+/*
+     Same as uncompress, except that sourceLen is a pointer, where the
+   length of the source is *sourceLen.  On return, *sourceLen is the number of
+   source bytes consumed.
+*/
+
+                        /* gzip file access functions */
+
+/*
+     This library supports reading and writing files in gzip (.gz) format with
+   an interface similar to that of stdio, using the functions that start with
+   "gz".  The gzip format is different from the zlib format.  gzip is a gzip
+   wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
+
+typedef struct gzFile_s *gzFile;    /* semi-opaque gzip file descriptor */
+
+/*
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+     Open the gzip (.gz) file at path for reading and decompressing, or
+   compressing and writing.  The mode parameter is as in fopen ("rb" or "wb")
+   but can also include a compression level ("wb9") or a strategy: 'f' for
+   filtered data as in "wb6f", 'h' for Huffman-only compression as in "wb1h",
+   'R' for run-length encoding as in "wb1R", or 'F' for fixed code compression
+   as in "wb9F".  (See the description of deflateInit2 for more information
+   about the strategy parameter.)  'T' will request transparent writing or
+   appending with no compression and not using the gzip format.
+
+     "a" can be used instead of "w" to request that the gzip stream that will
+   be written be appended to the file.  "+" will result in an error, since
+   reading and writing to the same gzip file is not supported.  The addition of
+   "x" when writing will create the file exclusively, which fails if the file
+   already exists.  On systems that support it, the addition of "e" when
+   reading or writing will set the flag to close the file on an execve() call.
+
+     These functions, as well as gzip, will read and decode a sequence of gzip
+   streams in a file.  The append function of gzopen() can be used to create
+   such a file.  (Also see gzflush() for another way to do this.)  When
+   appending, gzopen does not test whether the file begins with a gzip stream,
+   nor does it look for the end of the gzip streams to begin appending.  gzopen
+   will simply append a gzip stream to the existing file.
+
+     gzopen can be used to read a file which is not in gzip format; in this
+   case gzread will directly read from the file without decompression.  When
+   reading, this will be detected automatically by looking for the magic two-
+   byte gzip header.
+
+     gzopen returns NULL if the file could not be opened, if there was
+   insufficient memory to allocate the gzFile state, or if an invalid mode was
+   specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+   errno can be checked to determine if the reason gzopen failed was that the
+   file could not be opened.
+*/
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+     Associate a gzFile with the file descriptor fd.  File descriptors are
+   obtained from calls like open, dup, creat, pipe or fileno (if the file has
+   been previously opened with fopen).  The mode parameter is as in gzopen.
+
+     The next call of gzclose on the returned gzFile will also close the file
+   descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+   fd.  If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+   mode);.  The duplicated descriptor should be saved to avoid a leak, since
+   gzdopen does not close fd if it fails.  If you are using fileno() to get the
+   file descriptor from a FILE *, then you will have to use dup() to avoid
+   double-close()ing the file descriptor.  Both gzclose() and fclose() will
+   close the associated file descriptor, so they need to have different file
+   descriptors.
+
+     gzdopen returns NULL if there was insufficient memory to allocate the
+   gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+   provided, or '+' was provided), or if fd is -1.  The file descriptor is not
+   used until the next gz* read, write, seek, or close operation, so gzdopen
+   will not detect if fd is invalid (unless fd is -1).
+*/
+
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+     Set the internal buffer size used by this library's functions for file to
+   size.  The default buffer size is 8192 bytes.  This function must be called
+   after gzopen() or gzdopen(), and before any other calls that read or write
+   the file.  The buffer memory allocation is always deferred to the first read
+   or write.  Three times that size in buffer space is allocated.  A larger
+   buffer size of, for example, 64K or 128K bytes will noticeably increase the
+   speed of decompression (reading).
+
+     The new buffer size also affects the maximum length for gzprintf().
+
+     gzbuffer() returns 0 on success, or -1 on failure, such as being called
+   too late.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+     Dynamically update the compression level and strategy for file.  See the
+   description of deflateInit2 for the meaning of these parameters. Previously
+   provided data is flushed before applying the parameter changes.
+
+     gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not
+   opened for writing, Z_ERRNO if there is an error writing the flushed data,
+   or Z_MEM_ERROR if there is a memory allocation error.
+*/
+
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+/*
+     Read and decompress up to len uncompressed bytes from file into buf.  If
+   the input file is not in gzip format, gzread copies the given number of
+   bytes into the buffer directly from the file.
+
+     After reaching the end of a gzip stream in the input, gzread will continue
+   to read, looking for another gzip stream.  Any number of gzip streams may be
+   concatenated in the input file, and will all be decompressed by gzread().
+   If something other than a gzip stream is encountered after a gzip stream,
+   that remaining trailing garbage is ignored (and no error is returned).
+
+     gzread can be used to read a gzip file that is being concurrently written.
+   Upon reaching the end of the input, gzread will return with the available
+   data.  If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
+   gzclearerr can be used to clear the end of file indicator in order to permit
+   gzread to be tried again.  Z_OK indicates that a gzip stream was completed
+   on the last gzread.  Z_BUF_ERROR indicates that the input file ended in the
+   middle of a gzip stream.  Note that gzread does not return -1 in the event
+   of an incomplete gzip stream.  This error is deferred until gzclose(), which
+   will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
+   stream.  Alternatively, gzerror can be used before gzclose to detect this
+   case.
+
+     gzread returns the number of uncompressed bytes actually read, less than
+   len for end of file, or -1 for error.  If len is too large to fit in an int,
+   then nothing is read, -1 is returned, and the error state is set to
+   Z_STREAM_ERROR.
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
+                                     gzFile file));
+#endif
+/*
+     Read and decompress up to nitems items of size size from file into buf,
+   otherwise operating as gzread() does.  This duplicates the interface of
+   stdio's fread(), with size_t request and return types.  If the library
+   defines size_t, then z_size_t is identical to size_t.  If not, then z_size_t
+   is an unsigned integer type that can contain a pointer.
+
+     gzfread() returns the number of full items read of size size, or zero if
+   the end of the file was reached and a full item could not be read, or if
+   there was an error.  gzerror() must be consulted if zero is returned in
+   order to determine if there was an error.  If the multiplication of size and
+   nitems overflows, i.e. the product does not fit in a z_size_t, then nothing
+   is read, zero is returned, and the error state is set to Z_STREAM_ERROR.
+
+     In the event that the end of file is reached and only a partial item is
+   available at the end, i.e. the remaining uncompressed data length is not a
+   multiple of size, then the final partial item is nevetheless read into buf
+   and the end-of-file flag is set.  The length of the partial item read is not
+   provided, but could be inferred from the result of gztell().  This behavior
+   is the same as the behavior of fread() implementations in common libraries,
+   but it prevents the direct use of gzfread() to read a concurrently written
+   file, reseting and retrying on end-of-file, when size is not 1.
+*/
+
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file, voidpc buf, unsigned len));
+/*
+     Compress and write the len uncompressed bytes at buf to file. gzwrite
+   returns the number of uncompressed bytes written or 0 in case of error.
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size,
+                                      z_size_t nitems, gzFile file));
+#endif
+/*
+     Compress and write nitems items of size size from buf to file, duplicating
+   the interface of stdio's fwrite(), with size_t request and return types.  If
+   the library defines size_t, then z_size_t is identical to size_t.  If not,
+   then z_size_t is an unsigned integer type that can contain a pointer.
+
+     gzfwrite() returns the number of full items written of size size, or zero
+   if there was an error.  If the multiplication of size and nitems overflows,
+   i.e. the product does not fit in a z_size_t, then nothing is written, zero
+   is returned, and the error state is set to Z_STREAM_ERROR.
+*/
+
+ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
+/*
+     Convert, format, compress, and write the arguments (...) to file under
+   control of the string format, as in fprintf.  gzprintf returns the number of
+   uncompressed bytes actually written, or a negative zlib error code in case
+   of error.  The number of uncompressed bytes written is limited to 8191, or
+   one less than the buffer size given to gzbuffer().  The caller should assure
+   that this limit is not exceeded.  If it is exceeded, then gzprintf() will
+   return an error (0) with nothing written.  In this case, there may also be a
+   buffer overflow with unpredictable consequences, which is possible only if
+   zlib was compiled with the insecure functions sprintf() or vsprintf(),
+   because the secure snprintf() or vsnprintf() functions were not available.
+   This can be determined using zlibCompileFlags().
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+     Compress and write the given null-terminated string s to file, excluding
+   the terminating null character.
+
+     gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+     Read and decompress bytes from file into buf, until len-1 characters are
+   read, or until a newline character is read and transferred to buf, or an
+   end-of-file condition is encountered.  If any characters are read or if len
+   is one, the string is terminated with a null character.  If no characters
+   are read due to an end-of-file or len is less than one, then the buffer is
+   left untouched.
+
+     gzgets returns buf which is a null-terminated string, or it returns NULL
+   for end-of-file or in case of error.  If there was an error, the contents at
+   buf are indeterminate.
+*/
+
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+/*
+     Compress and write c, converted to an unsigned char, into file.  gzputc
+   returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+/*
+     Read and decompress one byte from file.  gzgetc returns this byte or -1
+   in case of end of file or error.  This is implemented as a macro for speed.
+   As such, it does not do all of the checking the other functions do.  I.e.
+   it does not check to see if file is NULL, nor whether the structure file
+   points to has been clobbered or not.
+*/
+
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
+/*
+     Push c back onto the stream for file to be read as the first character on
+   the next read.  At least one character of push-back is always allowed.
+   gzungetc() returns the character pushed, or -1 on failure.  gzungetc() will
+   fail if c is -1, and may fail if a character has been pushed but not read
+   yet.  If gzungetc is used immediately after gzopen or gzdopen, at least the
+   output buffer size of pushed characters is allowed.  (See gzbuffer above.)
+   The pushed character will be discarded if the stream is repositioned with
+   gzseek() or gzrewind().
+*/
+
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+/*
+     Flush all pending output to file.  The parameter flush is as in the
+   deflate() function.  The return value is the zlib error number (see function
+   gzerror below).  gzflush is only permitted when writing.
+
+     If the flush parameter is Z_FINISH, the remaining data is written and the
+   gzip stream is completed in the output.  If gzwrite() is called again, a new
+   gzip stream will be started in the output.  gzread() is able to read such
+   concatenated gzip streams.
+
+     gzflush should be called only when strictly necessary because it will
+   degrade compression if called too often.
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+                                   z_off_t offset, int whence));
+
+     Set the starting position to offset relative to whence for the next gzread
+   or gzwrite on file.  The offset represents a number of bytes in the
+   uncompressed data stream.  The whence parameter is defined as in lseek(2);
+   the value SEEK_END is not supported.
+
+     If the file is opened for reading, this function is emulated but can be
+   extremely slow.  If the file is opened for writing, only forward seeks are
+   supported; gzseek then compresses a sequence of zeroes up to the new
+   starting position.
+
+     gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error, in
+   particular if the file is opened for writing and the new starting position
+   would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
+/*
+     Rewind file. This function is supported only for reading.
+
+     gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET).
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
+
+     Return the starting position for the next gzread or gzwrite on file.
+   This position represents a number of bytes in the uncompressed data stream,
+   and is zero when starting, even if appending or reading a gzip stream from
+   the middle of a file using gzdopen().
+
+     gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+
+     Return the current compressed (actual) read or write offset of file.  This
+   offset includes the count of bytes that precede the gzip stream, for example
+   when appending or when using gzdopen() for reading.  When reading, the
+   offset does not include as yet unused buffered input.  This information can
+   be used for a progress indicator.  On error, gzoffset() returns -1.
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+     Return true (1) if the end-of-file indicator for file has been set while
+   reading, false (0) otherwise.  Note that the end-of-file indicator is set
+   only if the read tried to go past the end of the input, but came up short.
+   Therefore, just like feof(), gzeof() may return false even if there is no
+   more data to read, in the event that the last read request was for the exact
+   number of bytes remaining in the input file.  This will happen if the input
+   file size is an exact multiple of the buffer size.
+
+     If gzeof() returns true, then the read functions will return no more data,
+   unless the end-of-file indicator is reset by gzclearerr() and the input file
+   has grown since the previous end of file was detected.
+*/
+
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+     Return true (1) if file is being copied directly while reading, or false
+   (0) if file is a gzip stream being decompressed.
+
+     If the input file is empty, gzdirect() will return true, since the input
+   does not contain a gzip stream.
+
+     If gzdirect() is used immediately after gzopen() or gzdopen() it will
+   cause buffers to be allocated to allow reading the file to determine if it
+   is a gzip file.  Therefore if gzbuffer() is used, it should be called before
+   gzdirect().
+
+     When writing, gzdirect() returns true (1) if transparent writing was
+   requested ("wT" for the gzopen() mode), or false (0) otherwise.  (Note:
+   gzdirect() is not needed when writing.  Transparent writing must be
+   explicitly requested, so the application already knows the answer.  When
+   linking statically, using gzdirect() will include all of the zlib code for
+   gzip file reading and decompression, which may not be desired.)
+*/
+
+ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
+/*
+     Flush all pending output for file, if necessary, close file and
+   deallocate the (de)compression state.  Note that once file is closed, you
+   cannot call gzerror with file, since its structures have been deallocated.
+   gzclose must not be called more than once on the same file, just as free
+   must not be called more than once on the same allocation.
+
+     gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+   file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
+   last read ended in the middle of a gzip stream, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+     Same as gzclose(), but gzclose_r() is only for use when reading, and
+   gzclose_w() is only for use when writing or appending.  The advantage to
+   using these instead of gzclose() is that they avoid linking in zlib
+   compression or decompression code that is not used when only reading or only
+   writing respectively.  If gzclose() is used, then both compression and
+   decompression code will be included the application when linking to a static
+   zlib library.
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+     Return the error message for the last error which occurred on file.
+   errnum is set to zlib error number.  If an error occurred in the file system
+   and not in the compression library, errnum is set to Z_ERRNO and the
+   application may consult errno to get the exact error code.
+
+     The application must not modify the returned string.  Future calls to
+   this function may invalidate the previously returned string.  If file is
+   closed, then the string previously returned by gzerror will no longer be
+   available.
+
+     gzerror() should be used to distinguish errors from end-of-file for those
+   functions above that do not distinguish those cases in their return values.
+*/
+
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+     Clear the error and end-of-file flags for file.  This is analogous to the
+   clearerr() function in stdio.  This is useful for continuing to read a gzip
+   file that is being written concurrently.
+*/
+
+#endif /* !Z_SOLO */
+
+                        /* checksum functions */
+
+/*
+     These functions are not related to compression but are exported
+   anyway because they might be useful in applications using the compression
+   library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+/*
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum. An Adler-32 value is in the range of a 32-bit
+   unsigned integer. If buf is Z_NULL, this function returns the required
+   initial value for the checksum.
+
+     An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed
+   much faster.
+
+   Usage example:
+
+     uLong adler = adler32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN uLong ZEXPORT adler32_z OF((uLong adler, const Bytef *buf,
+                                    z_size_t len));
+#endif
+/*
+     Same as adler32(), but with a size_t length.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+                                          z_off_t len2));
+
+     Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
+   and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+   each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
+   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.  Note
+   that the z_off_t type (like off_t) is a signed integer.  If len2 is
+   negative, the result has no meaning or utility.
+*/
+
+ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
+/*
+     Update a running CRC-32 with the bytes buf[0..len-1] and return the
+   updated CRC-32. A CRC-32 value is in the range of a 32-bit unsigned integer.
+   If buf is Z_NULL, this function returns the required initial value for the
+   crc. Pre- and post-conditioning (one's complement) is performed within this
+   function so it shouldn't be done by the application.
+
+   Usage example:
+
+     uLong crc = crc32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       crc = crc32(crc, buffer, length);
+     }
+     if (crc != original_crc) error();
+*/
+
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN uLong ZEXPORT crc32_z OF((uLong crc, const Bytef *buf,
+                                  z_size_t len));
+#endif
+/*
+     Same as crc32(), but with a size_t length.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+     Combine two CRC-32 check values into one.  For two sequences of bytes,
+   seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+   calculated for each, crc1 and crc2.  crc32_combine() returns the CRC-32
+   check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+   len2.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine_gen OF((z_off_t len2));
+
+     Return the operator corresponding to length len2, to be used with
+   crc32_combine_op().
+*/
+
+ZEXTERN uLong ZEXPORT crc32_combine_op OF((uLong crc1, uLong crc2, uLong op));
+/*
+     Give the same result as crc32_combine(), using op in place of len2. op is
+   is generated from len2 by crc32_combine_gen(). This will be faster than
+   crc32_combine() if the generated op is used more than once.
+*/
+
+
+                        /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+                                      int windowBits, int memLevel,
+                                      int strategy, const char *version,
+                                      int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                      const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+                                         unsigned char FAR *window,
+                                         const char *version,
+                                         int stream_size));
+#ifdef Z_PREFIX_SET
+#  define z_deflateInit(strm, level) \
+          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_inflateInit(strm) \
+          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_inflateInit2(strm, windowBits) \
+          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                        (int)sizeof(z_stream))
+#  define z_inflateBackInit(strm, windowBits, window) \
+          inflateBackInit_((strm), (windowBits), (window), \
+                           ZLIB_VERSION, (int)sizeof(z_stream))
+#else
+#  define deflateInit(strm, level) \
+          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define inflateInit(strm) \
+          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define inflateInit2(strm, windowBits) \
+          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                        (int)sizeof(z_stream))
+#  define inflateBackInit(strm, windowBits, window) \
+          inflateBackInit_((strm), (windowBits), (window), \
+                           ZLIB_VERSION, (int)sizeof(z_stream))
+#endif
+
+#ifndef Z_SOLO
+
+/* gzgetc() macro and its supporting function and exposed data structure.  Note
+ * that the real internal state is much larger than the exposed structure.
+ * This abbreviated structure exposes just enough for the gzgetc() macro.  The
+ * user should not mess with these exposed elements, since their names or
+ * behavior could change in the future, perhaps even capriciously.  They can
+ * only be used by the gzgetc() macro.  You have been warned.
+ */
+struct gzFile_s {
+    unsigned have;
+    unsigned char *next;
+    z_off64_t pos;
+};
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
+#ifdef Z_PREFIX_SET
+#  undef z_gzgetc
+#  define z_gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
+#elif defined(Z_CR_PREFIX_SET)
+#    undef gzgetc
+#    define gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) \
+                     : (Cr_z_gzgetc)(g))
+#else
+#  define gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
+#endif
+
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#ifdef Z_LARGE64
+   ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+   ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+   ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+   ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+   ZEXTERN uLong ZEXPORT crc32_combine_gen64 OF((z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
+#  ifdef Z_PREFIX_SET
+#    define z_gzopen z_gzopen64
+#    define z_gzseek z_gzseek64
+#    define z_gztell z_gztell64
+#    define z_gzoffset z_gzoffset64
+#    define z_adler32_combine z_adler32_combine64
+#    define z_crc32_combine z_crc32_combine64
+#    define z_crc32_combine_gen z_crc32_combine_gen64
+#  else
+#    ifdef gzopen
+#      undef gzopen
+#    endif
+#    define gzopen gzopen64
+#    ifdef gzseek
+#      undef gzseek
+#    endif
+#    define gzseek gzseek64
+#    ifdef gztell
+#      undef gztell
+#    endif
+#    define gztell gztell64
+#    ifdef gzoffset
+#      undef gzoffset
+#    endif
+#    define gzoffset gzoffset64
+#    ifdef adler32_combine
+#      undef adler32_combine
+#    endif
+#    define adler32_combine adler32_combine64
+#    ifdef crc32_combine
+#      undef crc32_combine
+#    endif
+#    ifdef crc32_combine64
+#      undef crc32_combine64
+#    endif
+#    ifdef crc32_combine_gen
+#      undef crc32_combine_gen
+#    endif
+#    ifdef crc32_combine_op
+#      undef crc32_combine_op
+#    endif
+#  endif
+#  ifndef Z_LARGE64
+     ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+     ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+     ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+     ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+     ZEXTERN uLong ZEXPORT crc32_combine_gen64 OF((z_off_t));
+#  endif
+#else
+   ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+   ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+   ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+   ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine_gen OF((z_off_t));
+#endif
+
+#else /* Z_SOLO */
+
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine_gen OF((z_off_t));
+
+#endif /* !Z_SOLO */
+
+/* undocumented functions */
+ZEXTERN const char   * ZEXPORT zError           OF((int));
+ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
+ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN int            ZEXPORT inflateValidate OF((z_streamp, int));
+#endif
+#if !defined(__ANDROID__) || __ANDROID_API__ >= 28
+ZEXTERN unsigned long  ZEXPORT inflateCodesUsed OF ((z_streamp));
+#endif
+ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
+ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
+#if defined(_WIN32) && !defined(Z_SOLO)
+ZEXTERN gzFile         ZEXPORT gzopen_w OF((const wchar_t *path,
+                                            const char *mode));
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifndef Z_SOLO
+#    if !defined(__ANDROID__) || __ANDROID_API__ >= 19
+ZEXTERN int            ZEXPORTVA gzvprintf Z_ARG((gzFile file,
+                                                  const char *format,
+                                                  va_list va));
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZLIB_H */
diff --git a/sysroots/x86_64-linux-musl/lib/Scrt1-real.o b/sysroots/x86_64-linux-musl/lib/Scrt1-real.o
index 513deaf..920cd1c 100644
--- a/sysroots/x86_64-linux-musl/lib/Scrt1-real.o
+++ b/sysroots/x86_64-linux-musl/lib/Scrt1-real.o
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/crt1.o b/sysroots/x86_64-linux-musl/lib/crt1.o
index 4b30451..2eb5fd8 100644
--- a/sysroots/x86_64-linux-musl/lib/crt1.o
+++ b/sysroots/x86_64-linux-musl/lib/crt1.o
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/crtbegin.o b/sysroots/x86_64-linux-musl/lib/crtbegin.o
new file mode 100755
index 0000000..9e26192
--- /dev/null
+++ b/sysroots/x86_64-linux-musl/lib/crtbegin.o
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/crtbeginS.o b/sysroots/x86_64-linux-musl/lib/crtbeginS.o
new file mode 100755
index 0000000..9e26192
--- /dev/null
+++ b/sysroots/x86_64-linux-musl/lib/crtbeginS.o
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/crtbeginT.o b/sysroots/x86_64-linux-musl/lib/crtbeginT.o
new file mode 100755
index 0000000..9e26192
--- /dev/null
+++ b/sysroots/x86_64-linux-musl/lib/crtbeginT.o
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/crtend.o b/sysroots/x86_64-linux-musl/lib/crtend.o
new file mode 100755
index 0000000..66c32a1
--- /dev/null
+++ b/sysroots/x86_64-linux-musl/lib/crtend.o
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/crtendS.o b/sysroots/x86_64-linux-musl/lib/crtendS.o
new file mode 100755
index 0000000..66c32a1
--- /dev/null
+++ b/sysroots/x86_64-linux-musl/lib/crtendS.o
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/crti.o b/sysroots/x86_64-linux-musl/lib/crti.o
index 55a4ffc..48baafb 100644
--- a/sysroots/x86_64-linux-musl/lib/crti.o
+++ b/sysroots/x86_64-linux-musl/lib/crti.o
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/crtn.o b/sysroots/x86_64-linux-musl/lib/crtn.o
index af02170..144e3be 100644
--- a/sysroots/x86_64-linux-musl/lib/crtn.o
+++ b/sysroots/x86_64-linux-musl/lib/crtn.o
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/libc++.a b/sysroots/x86_64-linux-musl/lib/libc++.a
new file mode 100644
index 0000000..94c6d1e
--- /dev/null
+++ b/sysroots/x86_64-linux-musl/lib/libc++.a
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/libc++.so b/sysroots/x86_64-linux-musl/lib/libc++.so
index b5eac52..3f247d9 100755
--- a/sysroots/x86_64-linux-musl/lib/libc++.so
+++ b/sysroots/x86_64-linux-musl/lib/libc++.so
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/libc++abi.a b/sysroots/x86_64-linux-musl/lib/libc++abi.a
index 2747b58..72e4bc8 100644
--- a/sysroots/x86_64-linux-musl/lib/libc++abi.a
+++ b/sysroots/x86_64-linux-musl/lib/libc++abi.a
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/libc.a b/sysroots/x86_64-linux-musl/lib/libc.a
index 162cfc6..53680a5 100644
--- a/sysroots/x86_64-linux-musl/lib/libc.a
+++ b/sysroots/x86_64-linux-musl/lib/libc.a
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/libc_musl.so b/sysroots/x86_64-linux-musl/lib/libc_musl.so
index 113c4ad..2ebf854 100755
--- a/sysroots/x86_64-linux-musl/lib/libc_musl.so
+++ b/sysroots/x86_64-linux-musl/lib/libc_musl.so
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/libc_musl_linker_object.o b/sysroots/x86_64-linux-musl/lib/libc_musl_linker_object.o
index 20cc55c..25ee160 100644
--- a/sysroots/x86_64-linux-musl/lib/libc_musl_linker_object.o
+++ b/sysroots/x86_64-linux-musl/lib/libc_musl_linker_object.o
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/libz.a b/sysroots/x86_64-linux-musl/lib/libz.a
new file mode 100644
index 0000000..b3c4502
--- /dev/null
+++ b/sysroots/x86_64-linux-musl/lib/libz.a
Binary files differ
diff --git a/sysroots/x86_64-linux-musl/lib/linker.script b/sysroots/x86_64-linux-musl/lib/linker.script
index 950b948..3e927bc 100755
--- a/sysroots/x86_64-linux-musl/lib/linker.script
+++ b/sysroots/x86_64-linux-musl/lib/linker.script
@@ -3,13 +3,13 @@
   .linker_r 0x1000 : {
     KEEP(*(.linker_r));
   }
-  .linker_rx 0x500fc : {
+  .linker_rx 0x501ac : {
     KEEP(*(.linker_rx));
   }
-  .linker_rw 0x11a090 : {
+  .linker_rw 0x11a180 : {
     KEEP(*(.linker_rw));
   }
-  .linker_rw2 0x11b7f0 : {
+  .linker_rw2 0x11b8e0 : {
     KEEP(*(.linker_rw2));
   }
   /DISCARD/ : { *(.interp) }
diff --git a/sysroots/x86_64-linux-musl/lib/rcrt1.o b/sysroots/x86_64-linux-musl/lib/rcrt1.o
index 1716ec2..988b730 100644
--- a/sysroots/x86_64-linux-musl/lib/rcrt1.o
+++ b/sysroots/x86_64-linux-musl/lib/rcrt1.o
Binary files differ