| # /* vim: set ai ts=4 ft=sh: */ |
| # |
| # Copyright 2011, The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| _adb() { |
| unset -v have |
| type $1 &> /dev/null && have="yes" |
| |
| if [ "$have" != "yes" ]; then |
| return |
| fi |
| |
| local where i cur serial |
| COMPREPLY=() |
| |
| serial="${ANDROID_SERIAL:-none}" |
| where=OPTIONS |
| for ((i=1; i <= COMP_CWORD; i++)); do |
| cur="${COMP_WORDS[i]}" |
| case "${cur}" in |
| -s) |
| where=OPT_SERIAL |
| ;; |
| -p) |
| where=OPT_PATH |
| ;; |
| -*) |
| where=OPTIONS |
| ;; |
| *) |
| if [[ $where == OPT_SERIAL ]]; then |
| where=OPT_SERIAL_ARG |
| elif [[ $where == OPT_SERIAL_ARG ]]; then |
| serial=${cur} |
| where=OPTIONS |
| else |
| where=COMMAND |
| break |
| fi |
| ;; |
| esac |
| done |
| |
| if [[ $where == COMMAND && $i -ge $COMP_CWORD ]]; then |
| where=OPTIONS |
| fi |
| |
| OPTIONS="-d -e -s -p" |
| COMMAND="devices connect disconnect push pull sync shell emu logcat lolcat forward jdwp install uninstall bugreport help version start-server kill-server get-state get-serialno status-window remount reboot reboot-bootloader root usb tcpip" |
| |
| case $where in |
| OPTIONS|OPT_SERIAL|OPT_PATH) |
| COMPREPLY=( $(compgen -W "$OPTIONS $COMMAND" -- "$cur") ) |
| ;; |
| OPT_SERIAL_ARG) |
| local devices=$(command adb devices 2> /dev/null | grep -v "List of devices" | awk '{ print $1 }') |
| COMPREPLY=( $(compgen -W "${devices}" -- ${cur}) ) |
| ;; |
| COMMAND) |
| if [[ $i -eq $COMP_CWORD ]]; then |
| COMPREPLY=( $(compgen -W "$COMMAND" -- "$cur") ) |
| else |
| i=$((i+1)) |
| case "${cur}" in |
| install) |
| _adb_cmd_install "$serial" $i |
| ;; |
| sideload) |
| _adb_cmd_sideload "$serial" $i |
| ;; |
| pull) |
| _adb_cmd_pull "$serial" $i |
| ;; |
| push) |
| _adb_cmd_push "$serial" $i |
| ;; |
| reboot) |
| if [[ $COMP_CWORD == $i ]]; then |
| args="bootloader recovery" |
| COMPREPLY=( $(compgen -W "${args}" -- "${COMP_WORDS[i]}") ) |
| fi |
| ;; |
| shell) |
| _adb_cmd_shell "$serial" $i |
| ;; |
| uninstall) |
| _adb_cmd_uninstall "$serial" $i |
| ;; |
| esac |
| fi |
| ;; |
| esac |
| |
| return 0 |
| } |
| |
| _adb_cmd_install() { |
| local serial i cur where |
| |
| serial=$1 |
| i=$2 |
| |
| where=OPTIONS |
| for ((; i <= COMP_CWORD; i++)); do |
| cur="${COMP_WORDS[i]}" |
| case "${cur}" in |
| -*) |
| where=OPTIONS |
| ;; |
| *) |
| where=FILE |
| break |
| ;; |
| esac |
| done |
| |
| cur="${COMP_WORDS[COMP_CWORD]}" |
| if [[ $where == OPTIONS ]]; then |
| COMPREPLY=( $(compgen -W "-d -l -r -s" -- "${cur}") ) |
| return |
| fi |
| |
| _adb_util_complete_local_file "${cur}" '!*.apk' |
| } |
| |
| _adb_cmd_sideload() { |
| local serial i cur |
| |
| serial=$1 |
| i=$2 |
| |
| cur="${COMP_WORDS[COMP_CWORD]}" |
| |
| _adb_util_complete_local_file "${cur}" '!*.zip' |
| } |
| |
| _adb_cmd_push() { |
| local serial IFS=$'\n' i cur |
| |
| serial=$1 |
| i=$2 |
| |
| cur="${COMP_WORDS[COMP_CWORD]}" |
| |
| if [[ $COMP_CWORD == $i ]]; then |
| _adb_util_complete_local_file "${cur}" |
| elif [[ $COMP_CWORD == $(($i+1)) ]]; then |
| if [ "${cur}" == "" ]; then |
| cur="/" |
| fi |
| _adb_util_list_files $serial "${cur}" |
| fi |
| } |
| |
| _adb_cmd_pull() { |
| local serial IFS=$'\n' i cur |
| |
| serial=$1 |
| i=$2 |
| |
| cur="${COMP_WORDS[COMP_CWORD]}" |
| |
| if [[ $COMP_CWORD == $i ]]; then |
| if [ "${cur}" == "" ]; then |
| cur="/" |
| fi |
| _adb_util_list_files $serial "${cur}" |
| elif [[ $COMP_CWORD == $(($i+1)) ]]; then |
| _adb_util_complete_local_file "${cur}" |
| fi |
| } |
| |
| _adb_cmd_shell() { |
| local serial IFS=$'\n' i cur |
| local -a args |
| |
| serial=$1 |
| i=$2 |
| |
| cur="${COMP_WORDS[i]}" |
| if [ "$serial" != "none" ]; then |
| args=(-s $serial) |
| fi |
| |
| if [[ $i -eq $COMP_CWORD && ${cur:0:1} != "/" ]]; then |
| paths=$(command adb ${args[@]} shell echo '$'PATH 2> /dev/null | tr -d '\r' | tr : '\n') |
| COMMAND=$(command adb ${args[@]} shell ls $paths '2>' /dev/null | tr -d '\r' | { |
| while read -r tmp; do |
| command=${tmp##*/} |
| printf '%s\n' "$command" |
| done |
| }) |
| COMPREPLY=( $(compgen -W "$COMMAND" -- "$cur") ) |
| return 0 |
| fi |
| |
| i=$((i+1)) |
| case "$cur" in |
| ls) |
| _adb_shell_ls $serial $i |
| ;; |
| /*) |
| _adb_util_list_files $serial "$cur" |
| ;; |
| *) |
| COMPREPLY=( ) |
| ;; |
| esac |
| |
| return 0 |
| } |
| |
| _adb_cmd_uninstall() { |
| local serial i where cur packages |
| |
| serial=$1 |
| i=$2 |
| if [ "$serial" != "none" ]; then |
| args=(-s $serial) |
| fi |
| |
| where=OPTIONS |
| for ((; i <= COMP_CWORD; i++)); do |
| cur="${COMP_WORDS[i]}" |
| case "${cur}" in |
| -*) |
| where=OPTIONS |
| ;; |
| *) |
| where=FILE |
| break |
| ;; |
| esac |
| done |
| |
| cur="${COMP_WORDS[COMP_CWORD]}" |
| if [[ $where == OPTIONS ]]; then |
| COMPREPLY=( $(compgen -W "-k" -- "${cur}") ) |
| fi |
| |
| packages="$( |
| command adb ${args[@]} shell pm list packages '2>' /dev/null 2> /dev/null | tr -d '\r' | { |
| while read -r tmp; do |
| local package=${tmp#package:} |
| echo -n "${package} " |
| done |
| } |
| )" |
| |
| COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -W "${packages}" -- "${cur}") ) |
| } |
| |
| _adb_shell_ls() { |
| local serial i cur file |
| local -a args |
| |
| serial=$1 |
| i=$2 |
| if [ "$serial" != "none" ]; then |
| args=(-s $serial) |
| fi |
| |
| where=OPTIONS |
| for ((; i <= COMP_CWORD; i++)); do |
| cur="${COMP_WORDS[i]}" |
| case "${cur}" in |
| -*) |
| where=OPTIONS |
| ;; |
| *) |
| where=FILE |
| break |
| ;; |
| esac |
| done |
| |
| file="${COMP_WORDS[COMP_CWORD]}" |
| if [[ ${file} == "" ]]; then |
| file="/" |
| fi |
| |
| case $where in |
| OPTIONS) |
| COMPREPLY=( $(compgen -W "$OPTIONS" -- "$cur") ) |
| _adb_util_list_files $serial "$file" |
| ;; |
| FILE) |
| _adb_util_list_files $serial "$file" |
| ;; |
| esac |
| |
| return 0 |
| } |
| |
| _adb_util_list_files() { |
| local serial dir IFS=$'\n' |
| local -a toks |
| local -a args |
| |
| serial="$1" |
| file="$2" |
| |
| if [ "$serial" != "none" ]; then |
| args=(-s $serial) |
| fi |
| |
| toks=( ${toks[@]-} $( |
| command adb ${args[@]} shell ls -dF ${file}"*" '2>' /dev/null 2> /dev/null | tr -d '\r' | { |
| while read -r tmp; do |
| filetype=${tmp%% *} |
| filename=${tmp:${#filetype}+1} |
| if [[ ${filetype:${#filetype}-1:1} == d ]]; then |
| printf '%s/\n' "$filename" |
| else |
| printf '%s\n' "$filename" |
| fi |
| done |
| } |
| )) |
| |
| # Since we're probably doing file completion here, don't add a space after. |
| if [[ $(type -t compopt) = "builtin" ]]; then |
| compopt -o nospace |
| fi |
| |
| COMPREPLY=( ${COMPREPLY[@]:-} "${toks[@]}" ) |
| } |
| |
| _adb_util_complete_local_file() |
| { |
| local file xspec i j IFS=$'\n' |
| local -a dirs files |
| |
| file=$1 |
| xspec=$2 |
| |
| # Since we're probably doing file completion here, don't add a space after. |
| if [[ $(type -t compopt) = "builtin" ]]; then |
| compopt -o plusdirs |
| if [[ "${xspec}" == "" ]]; then |
| COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -f -- "${cur}") ) |
| else |
| compopt +o filenames |
| COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -f -X "${xspec}" -- "${cur}") ) |
| fi |
| else |
| # Work-around for shells with no compopt |
| |
| dirs=( $(compgen -d -- "${cur}" ) ) |
| |
| if [[ "${xspec}" == "" ]]; then |
| files=( ${COMPREPLY[@]:-} $(compgen -f -- "${cur}") ) |
| else |
| files=( ${COMPREPLY[@]:-} $(compgen -f -X "${xspec}" -- "${cur}") ) |
| fi |
| |
| COMPREPLY=( $( |
| for i in "${files[@]}"; do |
| local skip= |
| for j in "${dirs[@]}"; do |
| if [[ $i == $j ]]; then |
| skip=1 |
| break |
| fi |
| done |
| [[ -n $skip ]] || printf "%s\n" "$i" |
| done |
| )) |
| |
| COMPREPLY=( ${COMPREPLY[@]:-} $( |
| for i in "${dirs[@]}"; do |
| printf "%s/\n" "$i" |
| done |
| )) |
| fi |
| } |
| |
| |
| if [[ $(type -t compopt) = "builtin" ]]; then |
| complete -F _adb adb |
| else |
| complete -o nospace -F _adb adb |
| fi |