| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| #pragma once |
| |
| /****************************************************************************** |
| ** |
| ** Buffer configuration |
| ** |
| ******************************************************************************/ |
| |
| /* The size of the buffers in pool 0. */ |
| #ifndef GKI_BUF0_SIZE |
| #define GKI_BUF0_SIZE 64 |
| #endif |
| |
| /* The number of buffers in buffer pool 0. */ |
| #ifndef GKI_BUF0_MAX |
| #define GKI_BUF0_MAX 96 |
| #endif |
| |
| /* The ID of buffer pool 0. */ |
| #ifndef GKI_POOL_ID_0 |
| #define GKI_POOL_ID_0 0 |
| #endif |
| |
| /* The size of the buffers in pool 1. */ |
| #ifndef GKI_BUF1_SIZE |
| #define GKI_BUF1_SIZE 288 |
| #endif |
| |
| /* The number of buffers in buffer pool 1. */ |
| #ifndef GKI_BUF1_MAX |
| #define GKI_BUF1_MAX 52 |
| #endif |
| |
| /* The ID of buffer pool 1. */ |
| #ifndef GKI_POOL_ID_1 |
| #define GKI_POOL_ID_1 1 |
| #endif |
| |
| /* The size of the buffers in pool 2. */ |
| #ifndef GKI_BUF2_SIZE |
| #define GKI_BUF2_SIZE 660 |
| #endif |
| |
| /* The number of buffers in buffer pool 2. */ |
| #ifndef GKI_BUF2_MAX |
| #define GKI_BUF2_MAX 90 |
| #endif |
| |
| /* The ID of buffer pool 2. */ |
| #ifndef GKI_POOL_ID_2 |
| #define GKI_POOL_ID_2 2 |
| #endif |
| |
| /* The size of the buffers in pool 3. */ |
| #ifndef GKI_BUF3_SIZE |
| #define GKI_BUF3_SIZE (4096+16) |
| #endif |
| |
| /* The number of buffers in buffer pool 3. */ |
| #ifndef GKI_BUF3_MAX |
| #define GKI_BUF3_MAX 400 |
| #endif |
| |
| /* The ID of buffer pool 3. */ |
| #ifndef GKI_POOL_ID_3 |
| #define GKI_POOL_ID_3 3 |
| #endif |
| |
| /* The size of the largest PUBLIC fixed buffer in system. */ |
| #ifndef GKI_MAX_BUF_SIZE |
| #define GKI_MAX_BUF_SIZE GKI_BUF3_SIZE |
| #endif |
| |
| /* The pool ID of the largest PUBLIC fixed buffer in system. */ |
| #ifndef GKI_MAX_BUF_SIZE_POOL_ID |
| #define GKI_MAX_BUF_SIZE_POOL_ID GKI_POOL_ID_3 |
| #endif |
| |
| /* Pool 4 is used for BluetoothSocket L2CAP connections */ |
| /* The size of the buffers in pool 4. */ |
| #ifndef GKI_BUF4_SIZE |
| #define GKI_BUF4_SIZE (8080+26) |
| #endif |
| |
| /* The number of buffers in buffer pool 4. */ |
| #ifndef GKI_BUF4_MAX |
| #define GKI_BUF4_MAX (OBX_NUM_SERVERS + OBX_NUM_CLIENTS) |
| #endif |
| |
| /* The ID of buffer pool 4. */ |
| #ifndef GKI_POOL_ID_4 |
| #define GKI_POOL_ID_4 4 |
| #endif |
| |
| /* The number of fixed GKI buffer pools. |
| eL2CAP requires Pool ID 5 |
| If BTM_SCO_HCI_INCLUDED is FALSE, Pool ID 6 is unnecessary, otherwise set to 7 |
| If BTA_HL_INCLUDED is FALSE then Pool ID 7 is uncessary and set the following to 7, otherwise set to 8 |
| If BLE_INCLUDED is FALSE then Pool ID 8 is uncessary and set the following to 8, otherwise set to 9 |
| POOL_ID 9 is a public pool meant for large buffer needs such as SDP_DB |
| */ |
| #ifndef GKI_NUM_FIXED_BUF_POOLS |
| #define GKI_NUM_FIXED_BUF_POOLS 10 |
| #endif |
| |
| /* The buffer pool usage mask. */ |
| #ifndef GKI_DEF_BUFPOOL_PERM_MASK |
| /* Setting POOL_ID 9 as a public pool meant for large buffers such as SDP_DB */ |
| #define GKI_DEF_BUFPOOL_PERM_MASK 0xfdf0 |
| #endif |
| |
| /* The following is intended to be a reserved pool for L2CAP |
| Flow control and retransmissions and intentionally kept out |
| of order */ |
| |
| /* The number of buffers in buffer pool 5. */ |
| #ifndef GKI_BUF5_MAX |
| #define GKI_BUF5_MAX 64 |
| #endif |
| |
| /* The ID of buffer pool 5. */ |
| #ifndef GKI_POOL_ID_5 |
| #define GKI_POOL_ID_5 5 |
| #endif |
| |
| /* The size of the buffers in pool 5 |
| ** Special pool used by L2CAP retransmissions only. This size based on segment |
| ** that will fit into both DH5 and 2-DH3 packet types after accounting for GKI |
| ** header. 13 bytes of max headers allows us a 339 payload max. (in btui_app.txt) |
| ** Note: 748 used for insight scriptwrapper with CAT-2 scripts. |
| */ |
| #ifndef GKI_BUF5_SIZE |
| #define GKI_BUF5_SIZE 748 |
| #endif |
| |
| /* The following is intended to be a reserved pool for SCO |
| over HCI data and intentionally kept out of order */ |
| |
| /* The ID of buffer pool 6. */ |
| #ifndef GKI_POOL_ID_6 |
| #define GKI_POOL_ID_6 6 |
| #endif |
| |
| /* The size of the buffers in pool 6, |
| BUF_SIZE = max SCO data 255 + sizeof(BT_HDR) = 8 + SCO packet header 3 + padding 2 = 268 */ |
| #ifndef GKI_BUF6_SIZE |
| #define GKI_BUF6_SIZE 268 |
| #endif |
| |
| /* The number of buffers in buffer pool 6. */ |
| #ifndef GKI_BUF6_MAX |
| #define GKI_BUF6_MAX 60 |
| #endif |
| |
| |
| /* The following pool is a dedicated pool for HDP |
| If a shared pool is more desirable then |
| 1. set BTA_HL_LRG_DATA_POOL_ID to the desired Gki Pool ID |
| 2. make sure that the shared pool size is larger than 9472 |
| 3. adjust GKI_NUM_FIXED_BUF_POOLS accordingly since |
| POOL ID 7 is not needed |
| */ |
| |
| /* The ID of buffer pool 7. */ |
| #ifndef GKI_POOL_ID_7 |
| #define GKI_POOL_ID_7 7 |
| #endif |
| |
| /* The size of the buffers in pool 7 */ |
| #ifndef GKI_BUF7_SIZE |
| #define GKI_BUF7_SIZE (10240 + 24) |
| #endif |
| |
| /* The number of buffers in buffer pool 7. */ |
| #ifndef GKI_BUF7_MAX |
| #define GKI_BUF7_MAX 2 |
| #endif |
| |
| /* The following pool is a dedicated pool for GATT |
| If a shared pool is more desirable then |
| 1. set GATT_DB_POOL_ID to the desired Gki Pool ID |
| 2. make sure that the shared pool size fit a common GATT database needs |
| 3. adjust GKI_NUM_FIXED_BUF_POOLS accordingly since |
| POOL ID 8 is not needed |
| */ |
| |
| /* The ID of buffer pool 8. */ |
| #ifndef GKI_POOL_ID_8 |
| #define GKI_POOL_ID_8 8 |
| #endif |
| |
| /* The size of the buffers in pool 8 */ |
| #ifndef GKI_BUF8_SIZE |
| #define GKI_BUF8_SIZE 128 |
| #endif |
| |
| /* The number of buffers in buffer pool 8. */ |
| #ifndef GKI_BUF8_MAX |
| #define GKI_BUF8_MAX 30 |
| #endif |
| |
| /* The following pool is meant for large allocations such as SDP_DB */ |
| #ifndef GKI_POOL_ID_9 |
| #define GKI_POOL_ID_9 9 |
| #endif |
| |
| #ifndef GKI_BUF9_SIZE |
| #define GKI_BUF9_SIZE 8192 |
| #endif |
| |
| #ifndef GKI_BUF9_MAX |
| #define GKI_BUF9_MAX 5 |
| #endif |
| |
| /* The number of fixed and dynamic buffer pools */ |
| #ifndef GKI_NUM_TOTAL_BUF_POOLS |
| #define GKI_NUM_TOTAL_BUF_POOLS 10 |
| #endif |
| |
| void LogMsg (UINT32 trace_set_mask, const char *fmt_str, ...); |