service/low_energy_advertiser.cc - platform/system/bt - Gitiles

 //
 //  Copyright 2015 Google, Inc.
 //
 //  Licensed under the Apache License, Version 2.0 (the "License");
 //  you may not use this file except in compliance with the License.
 //  You may obtain a copy of the License at:
 //
 //  http://www.apache.org/licenses/LICENSE-2.0
 //
 //  Unless required by applicable law or agreed to in writing, software
 //  distributed under the License is distributed on an "AS IS" BASIS,
 //  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 //  See the License for the specific language governing permissions and
 //  limitations under the License.
 //

 #include "service/low_energy_advertiser.h"

 #include <base/bind.h>
 #include <base/logging.h>

 #include "service/adapter.h"
 #include "service/logging_helpers.h"
 #include "stack/include/bt_types.h"
 #include "stack/include/hcidefs.h"

 using std::lock_guard;
 using std::mutex;

 namespace bluetooth {

 namespace {

 BLEStatus GetBLEStatus(int status) {
   if (status == BT_STATUS_FAIL) return BLE_STATUS_FAILURE;

   return static_cast<BLEStatus>(status);
 }

 // The Bluetooth Core Specification defines time interval (e.g. Page Scan
 // Interval, Advertising Interval, etc) units as 0.625 milliseconds (or 1
 // Baseband slot). The HAL advertising functions expect the interval in this
 // unit. This function maps an AdvertiseSettings::Mode value to the
 // corresponding time unit.
 int GetAdvertisingIntervalUnit(AdvertiseSettings::Mode mode) {
   int ms;

   switch (mode) {
     case AdvertiseSettings::MODE_BALANCED:
       ms = kAdvertisingIntervalMediumMs;
       break;
     case AdvertiseSettings::MODE_LOW_LATENCY:
       ms = kAdvertisingIntervalLowMs;
       break;
     case AdvertiseSettings::MODE_LOW_POWER:
     // Fall through
     default:
       ms = kAdvertisingIntervalHighMs;
       break;
   }

   // Convert milliseconds to Bluetooth units.
   return (ms * 1000) / 625;
 }

 int8_t GetAdvertisingTxPower(AdvertiseSettings::TxPowerLevel tx_power) {
   int8_t power;

   switch (tx_power) {
     case AdvertiseSettings::TX_POWER_LEVEL_ULTRA_LOW:
       power = -21;
       break;
     case AdvertiseSettings::TX_POWER_LEVEL_LOW:
       power = -15;
       break;
     case AdvertiseSettings::TX_POWER_LEVEL_MEDIUM:
       power = -7;
       break;
     case AdvertiseSettings::TX_POWER_LEVEL_HIGH:
     // Fall through
     default:
       power = 1;
       break;
   }

   return power;
 }

 void GetAdvertiseParams(const AdvertiseSettings& settings, bool has_scan_rsp,
                         AdvertiseParameters* out_params) {
   CHECK(out_params);

   out_params->min_interval = GetAdvertisingIntervalUnit(settings.mode());
   out_params->max_interval =
       out_params->min_interval + kAdvertisingIntervalDeltaUnit;

   if (settings.connectable())
     out_params->advertising_event_properties =
         kAdvertisingEventTypeLegacyConnectable;
   else if (has_scan_rsp)
     out_params->advertising_event_properties =
         kAdvertisingEventTypeLegacyScannable;
   else
     out_params->advertising_event_properties =
         kAdvertisingEventTypeLegacyNonConnectable;

   out_params->channel_map = kAdvertisingChannelAll;
   out_params->tx_power = GetAdvertisingTxPower(settings.tx_power_level());

   // TODO: expose those new setting through AdvertiseSettings
   out_params->primary_advertising_phy = 0x01;
   out_params->secondary_advertising_phy = 0x01;
   out_params->scan_request_notification_enable = 0;
 }

 void DoNothing(uint8_t status) {}

 }  // namespace

 // LowEnergyAdvertiser implementation
 // ========================================================

 LowEnergyAdvertiser::LowEnergyAdvertiser(const Uuid& uuid, int advertiser_id)
     : app_identifier_(uuid),
       advertiser_id_(advertiser_id),
       adv_started_(false),
       adv_start_callback_(nullptr),
       adv_stop_callback_(nullptr) {}

 LowEnergyAdvertiser::~LowEnergyAdvertiser() {
   // Automatically unregister the advertiser.
   VLOG(1) << "LowEnergyAdvertiser unregistering advertiser: " << advertiser_id_;

   // Stop advertising and ignore the result.
   hal::BluetoothGattInterface::Get()->GetAdvertiserHALInterface()->Enable(
       advertiser_id_, false, base::Bind(&DoNothing), 0, 0,
       base::Bind(&DoNothing));
   hal::BluetoothGattInterface::Get()->GetAdvertiserHALInterface()->Unregister(
       advertiser_id_);
 }

 bool LowEnergyAdvertiser::StartAdvertising(const AdvertiseSettings& settings,
                                            const AdvertiseData& advertise_data,
                                            const AdvertiseData& scan_response,
                                            const StatusCallback& callback) {
   VLOG(2) << __func__;
   lock_guard<mutex> lock(adv_fields_lock_);

   if (IsAdvertisingStarted()) {
     LOG(WARNING) << "Already advertising";
     return false;
   }

   if (IsStartingAdvertising()) {
     LOG(WARNING) << "StartAdvertising already pending";
     return false;
   }

   if (!advertise_data.IsValid()) {
     LOG(ERROR) << "Invalid advertising data";
     return false;
   }

   if (!scan_response.IsValid()) {
     LOG(ERROR) << "Invalid scan response data";
     return false;
   }

   advertise_settings_ = settings;

   AdvertiseParameters params;
   GetAdvertiseParams(settings, !scan_response.data().empty(), &params);

   hal::BluetoothGattInterface::Get()
       ->GetAdvertiserHALInterface()
       ->StartAdvertising(
           advertiser_id_,
           base::Bind(&LowEnergyAdvertiser::EnableCallback,
                      base::Unretained(this), true, advertiser_id_),
           params, advertise_data.data(), scan_response.data(),
           settings.timeout().InSeconds(),
           base::Bind(&LowEnergyAdvertiser::EnableCallback,
                      base::Unretained(this), false, advertiser_id_));
   ;

   adv_start_callback_.reset(new StatusCallback(callback));
   return true;
 }

 bool LowEnergyAdvertiser::StopAdvertising(const StatusCallback& callback) {
   VLOG(2) << __func__;
   lock_guard<mutex> lock(adv_fields_lock_);

   if (!IsAdvertisingStarted()) {
     LOG(ERROR) << "Not advertising";
     return false;
   }

   if (IsStoppingAdvertising()) {
     LOG(ERROR) << "StopAdvertising already pending";
     return false;
   }

   hal::BluetoothGattInterface::Get()->GetAdvertiserHALInterface()->Enable(
       advertiser_id_, false,
       base::Bind(&LowEnergyAdvertiser::EnableCallback, base::Unretained(this),
                  false, advertiser_id_),
       0, 0, base::Bind(&LowEnergyAdvertiser::EnableCallback,
                        base::Unretained(this), false, advertiser_id_));

   // OK to set this at the end since we're still holding |adv_fields_lock_|.
   adv_stop_callback_.reset(new StatusCallback(callback));

   return true;
 }

 bool LowEnergyAdvertiser::IsAdvertisingStarted() const {
   return adv_started_.load();
 }

 bool LowEnergyAdvertiser::IsStartingAdvertising() const {
   return !IsAdvertisingStarted() && adv_start_callback_;
 }

 bool LowEnergyAdvertiser::IsStoppingAdvertising() const {
   return IsAdvertisingStarted() && adv_stop_callback_;
 }

 const Uuid& LowEnergyAdvertiser::GetAppIdentifier() const {
   return app_identifier_;
 }

 int LowEnergyAdvertiser::GetInstanceId() const { return advertiser_id_; }

 void LowEnergyAdvertiser::EnableCallback(bool enable, uint8_t advertiser_id,
                                          uint8_t status) {
   if (advertiser_id != advertiser_id_) return;

   lock_guard<mutex> lock(adv_fields_lock_);

   VLOG(1) << __func__ << "advertiser_id: " << advertiser_id
           << " status: " << status << " enable: " << enable;

   if (enable) {
     CHECK(adv_start_callback_);
     CHECK(!adv_stop_callback_);

     // Terminate operation in case of error.
     if (status != BT_STATUS_SUCCESS) {
       LOG(ERROR) << "Failed to enable multi-advertising";
       InvokeAndClearStartCallback(GetBLEStatus(status));
       return;
     }

     // All pending tasks are complete. Report success.
     adv_started_ = true;
     InvokeAndClearStartCallback(BLE_STATUS_SUCCESS);

   } else {
     CHECK(!adv_start_callback_);
     CHECK(adv_stop_callback_);

     if (status == BT_STATUS_SUCCESS) {
       VLOG(1) << "Multi-advertising stopped for advertiser_id: "
               << advertiser_id;
       adv_started_ = false;
     } else {
       LOG(ERROR) << "Failed to stop multi-advertising";
     }

     InvokeAndClearStopCallback(GetBLEStatus(status));
   }
 }

 void LowEnergyAdvertiser::InvokeAndClearStartCallback(BLEStatus status) {
   // We allow NULL callbacks.
   if (*adv_start_callback_) (*adv_start_callback_)(status);

   adv_start_callback_ = nullptr;
 }

 void LowEnergyAdvertiser::InvokeAndClearStopCallback(BLEStatus status) {
   // We allow NULL callbacks.
   if (*adv_stop_callback_) (*adv_stop_callback_)(status);

   adv_stop_callback_ = nullptr;
 }

 // LowEnergyAdvertiserFactory implementation
 // ========================================================

 LowEnergyAdvertiserFactory::LowEnergyAdvertiserFactory() {}

 LowEnergyAdvertiserFactory::~LowEnergyAdvertiserFactory() {}

 bool LowEnergyAdvertiserFactory::RegisterInstance(
     const Uuid& app_uuid, const RegisterCallback& callback) {
   VLOG(1) << __func__;
   lock_guard<mutex> lock(pending_calls_lock_);

   if (pending_calls_.find(app_uuid) != pending_calls_.end()) {
     LOG(ERROR) << "Low-Energy advertiser with given Uuid already registered - "
                << "Uuid: " << app_uuid.ToString();
     return false;
   }

   BleAdvertiserInterface* hal_iface =
       hal::BluetoothGattInterface::Get()->GetAdvertiserHALInterface();

   VLOG(1) << __func__ << " calling register!";
   hal_iface->RegisterAdvertiser(
       base::Bind(&LowEnergyAdvertiserFactory::RegisterAdvertiserCallback,
                  base::Unretained(this), callback, app_uuid));
   VLOG(1) << __func__ << " call finished!";

   pending_calls_.insert(app_uuid);

   return true;
 }

 void LowEnergyAdvertiserFactory::RegisterAdvertiserCallback(
     const RegisterCallback& callback, const Uuid& app_uuid,
     uint8_t advertiser_id, uint8_t status) {
   VLOG(1) << __func__;
   lock_guard<mutex> lock(pending_calls_lock_);

   auto iter = pending_calls_.find(app_uuid);
   if (iter == pending_calls_.end()) {
     VLOG(1) << "Ignoring callback for unknown app_id: " << app_uuid.ToString();
     return;
   }

   // No need to construct a advertiser if the call wasn't successful.
   std::unique_ptr<LowEnergyAdvertiser> advertiser;
   BLEStatus result = BLE_STATUS_FAILURE;
   if (status == BT_STATUS_SUCCESS) {
     advertiser.reset(new LowEnergyAdvertiser(app_uuid, advertiser_id));

     result = BLE_STATUS_SUCCESS;
   }

   // Notify the result via the result callback.
   callback(result, app_uuid, std::move(advertiser));

   pending_calls_.erase(iter);
 }

 }  // namespace bluetooth
	//
	// Copyright 2015 Google, Inc.
	//
	// Licensed under the Apache License, Version 2.0 (the "License");
	// you may not use this file except in compliance with the License.
	// You may obtain a copy of the License at:
	//
	// http://www.apache.org/licenses/LICENSE-2.0
	//
	// Unless required by applicable law or agreed to in writing, software
	// distributed under the License is distributed on an "AS IS" BASIS,
	// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	// See the License for the specific language governing permissions and
	// limitations under the License.
	//

	#include "service/low_energy_advertiser.h"

	#include <base/bind.h>
	#include <base/logging.h>

	#include "service/adapter.h"
	#include "service/logging_helpers.h"
	#include "stack/include/bt_types.h"
	#include "stack/include/hcidefs.h"

	using std::lock_guard;
	using std::mutex;

	namespace bluetooth {

	namespace {

	BLEStatus GetBLEStatus(int status) {
	if (status == BT_STATUS_FAIL) return BLE_STATUS_FAILURE;

	return static_cast<BLEStatus>(status);
	}

	// The Bluetooth Core Specification defines time interval (e.g. Page Scan
	// Interval, Advertising Interval, etc) units as 0.625 milliseconds (or 1
	// Baseband slot). The HAL advertising functions expect the interval in this
	// unit. This function maps an AdvertiseSettings::Mode value to the
	// corresponding time unit.
	int GetAdvertisingIntervalUnit(AdvertiseSettings::Mode mode) {
	int ms;

	switch (mode) {
	case AdvertiseSettings::MODE_BALANCED:
	ms = kAdvertisingIntervalMediumMs;
	break;
	case AdvertiseSettings::MODE_LOW_LATENCY:
	ms = kAdvertisingIntervalLowMs;
	break;
	case AdvertiseSettings::MODE_LOW_POWER:
	// Fall through
	default:
	ms = kAdvertisingIntervalHighMs;
	break;
	}

	// Convert milliseconds to Bluetooth units.
	return (ms * 1000) / 625;
	}

	int8_t GetAdvertisingTxPower(AdvertiseSettings::TxPowerLevel tx_power) {
	int8_t power;

	switch (tx_power) {
	case AdvertiseSettings::TX_POWER_LEVEL_ULTRA_LOW:
	power = -21;
	break;
	case AdvertiseSettings::TX_POWER_LEVEL_LOW:
	power = -15;
	break;
	case AdvertiseSettings::TX_POWER_LEVEL_MEDIUM:
	power = -7;
	break;
	case AdvertiseSettings::TX_POWER_LEVEL_HIGH:
	// Fall through
	default:
	power = 1;
	break;
	}

	return power;
	}

	void GetAdvertiseParams(const AdvertiseSettings& settings, bool has_scan_rsp,
	AdvertiseParameters* out_params) {
	CHECK(out_params);

	out_params->min_interval = GetAdvertisingIntervalUnit(settings.mode());
	out_params->max_interval =
	out_params->min_interval + kAdvertisingIntervalDeltaUnit;

	if (settings.connectable())
	out_params->advertising_event_properties =
	kAdvertisingEventTypeLegacyConnectable;
	else if (has_scan_rsp)
	out_params->advertising_event_properties =
	kAdvertisingEventTypeLegacyScannable;
	else
	out_params->advertising_event_properties =
	kAdvertisingEventTypeLegacyNonConnectable;

	out_params->channel_map = kAdvertisingChannelAll;
	out_params->tx_power = GetAdvertisingTxPower(settings.tx_power_level());

	// TODO: expose those new setting through AdvertiseSettings
	out_params->primary_advertising_phy = 0x01;
	out_params->secondary_advertising_phy = 0x01;
	out_params->scan_request_notification_enable = 0;
	}

	void DoNothing(uint8_t status) {}

	} // namespace

	// LowEnergyAdvertiser implementation
	// ========================================================

	LowEnergyAdvertiser::LowEnergyAdvertiser(const Uuid& uuid, int advertiser_id)
	: app_identifier_(uuid),
	advertiser_id_(advertiser_id),
	adv_started_(false),
	adv_start_callback_(nullptr),
	adv_stop_callback_(nullptr) {}

	LowEnergyAdvertiser::~LowEnergyAdvertiser() {
	// Automatically unregister the advertiser.
	VLOG(1) << "LowEnergyAdvertiser unregistering advertiser: " << advertiser_id_;

	// Stop advertising and ignore the result.
	hal::BluetoothGattInterface::Get()->GetAdvertiserHALInterface()->Enable(
	advertiser_id_, false, base::Bind(&DoNothing), 0, 0,
	base::Bind(&DoNothing));
	hal::BluetoothGattInterface::Get()->GetAdvertiserHALInterface()->Unregister(
	advertiser_id_);
	}

	bool LowEnergyAdvertiser::StartAdvertising(const AdvertiseSettings& settings,
	const AdvertiseData& advertise_data,
	const AdvertiseData& scan_response,
	const StatusCallback& callback) {
	VLOG(2) << __func__;
	lock_guard<mutex> lock(adv_fields_lock_);

	if (IsAdvertisingStarted()) {
	LOG(WARNING) << "Already advertising";
	return false;
	}

	if (IsStartingAdvertising()) {
	LOG(WARNING) << "StartAdvertising already pending";
	return false;
	}

	if (!advertise_data.IsValid()) {
	LOG(ERROR) << "Invalid advertising data";
	return false;
	}

	if (!scan_response.IsValid()) {
	LOG(ERROR) << "Invalid scan response data";
	return false;
	}

	advertise_settings_ = settings;

	AdvertiseParameters params;
	GetAdvertiseParams(settings, !scan_response.data().empty(), &params);

	hal::BluetoothGattInterface::Get()
	->GetAdvertiserHALInterface()
	->StartAdvertising(
	advertiser_id_,
	base::Bind(&LowEnergyAdvertiser::EnableCallback,
	base::Unretained(this), true, advertiser_id_),
	params, advertise_data.data(), scan_response.data(),
	settings.timeout().InSeconds(),
	base::Bind(&LowEnergyAdvertiser::EnableCallback,
	base::Unretained(this), false, advertiser_id_));
	;

	adv_start_callback_.reset(new StatusCallback(callback));
	return true;
	}

	bool LowEnergyAdvertiser::StopAdvertising(const StatusCallback& callback) {
	VLOG(2) << __func__;
	lock_guard<mutex> lock(adv_fields_lock_);

	if (!IsAdvertisingStarted()) {
	LOG(ERROR) << "Not advertising";
	return false;
	}

	if (IsStoppingAdvertising()) {
	LOG(ERROR) << "StopAdvertising already pending";
	return false;
	}

	hal::BluetoothGattInterface::Get()->GetAdvertiserHALInterface()->Enable(
	advertiser_id_, false,
	base::Bind(&LowEnergyAdvertiser::EnableCallback, base::Unretained(this),
	false, advertiser_id_),
	0, 0, base::Bind(&LowEnergyAdvertiser::EnableCallback,
	base::Unretained(this), false, advertiser_id_));

	// OK to set this at the end since we're still holding \|adv_fields_lock_\|.
	adv_stop_callback_.reset(new StatusCallback(callback));

	return true;
	}

	bool LowEnergyAdvertiser::IsAdvertisingStarted() const {
	return adv_started_.load();
	}

	bool LowEnergyAdvertiser::IsStartingAdvertising() const {
	return !IsAdvertisingStarted() && adv_start_callback_;
	}

	bool LowEnergyAdvertiser::IsStoppingAdvertising() const {
	return IsAdvertisingStarted() && adv_stop_callback_;
	}

	const Uuid& LowEnergyAdvertiser::GetAppIdentifier() const {
	return app_identifier_;
	}

	int LowEnergyAdvertiser::GetInstanceId() const { return advertiser_id_; }

	void LowEnergyAdvertiser::EnableCallback(bool enable, uint8_t advertiser_id,
	uint8_t status) {
	if (advertiser_id != advertiser_id_) return;

	lock_guard<mutex> lock(adv_fields_lock_);

	VLOG(1) << __func__ << "advertiser_id: " << advertiser_id
	<< " status: " << status << " enable: " << enable;

	if (enable) {
	CHECK(adv_start_callback_);
	CHECK(!adv_stop_callback_);

	// Terminate operation in case of error.
	if (status != BT_STATUS_SUCCESS) {
	LOG(ERROR) << "Failed to enable multi-advertising";
	InvokeAndClearStartCallback(GetBLEStatus(status));
	return;
	}

	// All pending tasks are complete. Report success.
	adv_started_ = true;
	InvokeAndClearStartCallback(BLE_STATUS_SUCCESS);

	} else {
	CHECK(!adv_start_callback_);
	CHECK(adv_stop_callback_);

	if (status == BT_STATUS_SUCCESS) {
	VLOG(1) << "Multi-advertising stopped for advertiser_id: "
	<< advertiser_id;
	adv_started_ = false;
	} else {
	LOG(ERROR) << "Failed to stop multi-advertising";
	}

	InvokeAndClearStopCallback(GetBLEStatus(status));
	}
	}

	void LowEnergyAdvertiser::InvokeAndClearStartCallback(BLEStatus status) {
	// We allow NULL callbacks.
	if (adv_start_callback_) (adv_start_callback_)(status);

	adv_start_callback_ = nullptr;
	}

	void LowEnergyAdvertiser::InvokeAndClearStopCallback(BLEStatus status) {
	// We allow NULL callbacks.
	if (adv_stop_callback_) (adv_stop_callback_)(status);

	adv_stop_callback_ = nullptr;
	}

	// LowEnergyAdvertiserFactory implementation
	// ========================================================

	LowEnergyAdvertiserFactory::LowEnergyAdvertiserFactory() {}

	LowEnergyAdvertiserFactory::~LowEnergyAdvertiserFactory() {}

	bool LowEnergyAdvertiserFactory::RegisterInstance(
	const Uuid& app_uuid, const RegisterCallback& callback) {
	VLOG(1) << __func__;
	lock_guard<mutex> lock(pending_calls_lock_);

	if (pending_calls_.find(app_uuid) != pending_calls_.end()) {
	LOG(ERROR) << "Low-Energy advertiser with given Uuid already registered - "
	<< "Uuid: " << app_uuid.ToString();
	return false;
	}

	BleAdvertiserInterface* hal_iface =
	hal::BluetoothGattInterface::Get()->GetAdvertiserHALInterface();

	VLOG(1) << __func__ << " calling register!";
	hal_iface->RegisterAdvertiser(
	base::Bind(&LowEnergyAdvertiserFactory::RegisterAdvertiserCallback,
	base::Unretained(this), callback, app_uuid));
	VLOG(1) << __func__ << " call finished!";

	pending_calls_.insert(app_uuid);

	return true;
	}

	void LowEnergyAdvertiserFactory::RegisterAdvertiserCallback(
	const RegisterCallback& callback, const Uuid& app_uuid,
	uint8_t advertiser_id, uint8_t status) {
	VLOG(1) << __func__;
	lock_guard<mutex> lock(pending_calls_lock_);

	auto iter = pending_calls_.find(app_uuid);
	if (iter == pending_calls_.end()) {
	VLOG(1) << "Ignoring callback for unknown app_id: " << app_uuid.ToString();
	return;
	}

	// No need to construct a advertiser if the call wasn't successful.
	std::unique_ptr<LowEnergyAdvertiser> advertiser;
	BLEStatus result = BLE_STATUS_FAILURE;
	if (status == BT_STATUS_SUCCESS) {
	advertiser.reset(new LowEnergyAdvertiser(app_uuid, advertiser_id));

	result = BLE_STATUS_SUCCESS;
	}

	// Notify the result via the result callback.
	callback(result, app_uuid, std::move(advertiser));

	pending_calls_.erase(iter);
	}

	} // namespace bluetooth