| /****************************************************************************** |
| * |
| * Copyright (C) 2008-2014 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains functions for BLE GAP. |
| * |
| ******************************************************************************/ |
| |
| #define LOG_TAG "bt_btm_ble" |
| |
| #include <string.h> |
| #include <stdio.h> |
| #include <stddef.h> |
| |
| #include "bt_types.h" |
| #include "bt_utils.h" |
| #include "btm_ble_api.h" |
| #include "btm_int.h" |
| #include "btu.h" |
| #include "device/include/controller.h" |
| #include "gap_api.h" |
| #include "hcimsgs.h" |
| |
| #if BLE_INCLUDED == TRUE |
| |
| #include "btm_ble_int.h" |
| #include "gatt_int.h" |
| #include "gattdefs.h" |
| #include "l2c_int.h" |
| #include "osi/include/log.h" |
| |
| #define BTM_BLE_NAME_SHORT 0x01 |
| #define BTM_BLE_NAME_CMPL 0x02 |
| |
| #define BTM_BLE_FILTER_TARGET_UNKNOWN 0xff |
| #define BTM_BLE_POLICY_UNKNOWN 0xff |
| |
| #define BTM_EXT_BLE_RMT_NAME_TIMEOUT 30 |
| #define MIN_ADV_LENGTH 2 |
| #define BTM_VSC_CHIP_CAPABILITY_RSP_LEN_L_RELEASE 9 |
| |
| static tBTM_BLE_VSC_CB cmn_ble_vsc_cb; |
| |
| #if BLE_VND_INCLUDED == TRUE |
| static tBTM_BLE_CTRL_FEATURES_CBACK *p_ctrl_le_feature_rd_cmpl_cback = NULL; |
| #endif |
| |
| /******************************************************************************* |
| ** Local functions |
| *******************************************************************************/ |
| static void btm_ble_update_adv_flag(UINT8 flag); |
| static void btm_ble_process_adv_pkt_cont(BD_ADDR bda, UINT8 addr_type, UINT8 evt_type, UINT8 *p); |
| UINT8 *btm_ble_build_adv_data(tBTM_BLE_AD_MASK *p_data_mask, UINT8 **p_dst, |
| tBTM_BLE_ADV_DATA *p_data); |
| static UINT8 btm_set_conn_mode_adv_init_addr(tBTM_BLE_INQ_CB *p_cb, |
| BD_ADDR_PTR p_peer_addr_ptr, |
| tBLE_ADDR_TYPE *p_peer_addr_type, |
| tBLE_ADDR_TYPE *p_own_addr_type); |
| static void btm_ble_stop_observe(void); |
| |
| #define BTM_BLE_INQ_RESULT 0x01 |
| #define BTM_BLE_OBS_RESULT 0x02 |
| #define BTM_BLE_SEL_CONN_RESULT 0x04 |
| |
| /* LE states combo bit to check */ |
| const UINT8 btm_le_state_combo_tbl[BTM_BLE_STATE_MAX][BTM_BLE_STATE_MAX][2] = |
| { |
| {/* single state support */ |
| {HCI_SUPP_LE_STATES_CONN_ADV_MASK, HCI_SUPP_LE_STATES_CONN_ADV_OFF}, /* conn_adv */ |
| {HCI_SUPP_LE_STATES_INIT_MASK, HCI_SUPP_LE_STATES_INIT_OFF}, /* init */ |
| {HCI_SUPP_LE_STATES_INIT_MASK, HCI_SUPP_LE_STATES_INIT_OFF}, /* master */ |
| {HCI_SUPP_LE_STATES_SLAVE_MASK, HCI_SUPP_LE_STATES_SLAVE_OFF}, /* slave */ |
| {0, 0}, /* todo: lo du dir adv, not covered ? */ |
| {HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_MASK, HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_OFF}, /* hi duty dir adv */ |
| {HCI_SUPP_LE_STATES_NON_CONN_ADV_MASK, HCI_SUPP_LE_STATES_NON_CONN_ADV_OFF}, /* non connectable adv */ |
| {HCI_SUPP_LE_STATES_PASS_SCAN_MASK, HCI_SUPP_LE_STATES_PASS_SCAN_OFF}, /* passive scan */ |
| {HCI_SUPP_LE_STATES_ACTIVE_SCAN_MASK, HCI_SUPP_LE_STATES_ACTIVE_SCAN_OFF}, /* active scan */ |
| {HCI_SUPP_LE_STATES_SCAN_ADV_MASK, HCI_SUPP_LE_STATESSCAN_ADV_OFF} /* scanable adv */ |
| }, |
| { /* conn_adv =0 */ |
| {0, 0}, /* conn_adv */ |
| {HCI_SUPP_LE_STATES_CONN_ADV_INIT_MASK, HCI_SUPP_LE_STATES_CONN_ADV_INIT_OFF}, /* init: 32 */ |
| {HCI_SUPP_LE_STATES_CONN_ADV_MASTER_MASK, HCI_SUPP_LE_STATES_CONN_ADV_MASTER_OFF}, /* master: 35 */ |
| {HCI_SUPP_LE_STATES_CONN_ADV_SLAVE_MASK, HCI_SUPP_LE_STATES_CONN_ADV_SLAVE_OFF}, /* slave: 38,*/ |
| {0, 0}, /* lo du dir adv */ |
| {0, 0}, /* hi duty dir adv */ |
| {0, 0}, /* non connectable adv */ |
| {HCI_SUPP_LE_STATES_CONN_ADV_PASS_SCAN_MASK, HCI_SUPP_LE_STATES_CONN_ADV_PASS_SCAN_OFF}, /* passive scan */ |
| {HCI_SUPP_LE_STATES_CONN_ADV_ACTIVE_SCAN_MASK, HCI_SUPP_LE_STATES_CONN_ADV_ACTIVE_SCAN_OFF}, /* active scan */ |
| {0, 0} /* scanable adv */ |
| }, |
| { /* init */ |
| {HCI_SUPP_LE_STATES_CONN_ADV_INIT_MASK, HCI_SUPP_LE_STATES_CONN_ADV_INIT_OFF}, /* conn_adv: 32 */ |
| {0, 0}, /* init */ |
| {HCI_SUPP_LE_STATES_INIT_MASTER_MASK, HCI_SUPP_LE_STATES_INIT_MASTER_OFF}, /* master 28 */ |
| {HCI_SUPP_LE_STATES_INIT_MASTER_SLAVE_MASK, HCI_SUPP_LE_STATES_INIT_MASTER_SLAVE_OFF}, /* slave 41 */ |
| {HCI_SUPP_LE_STATES_LO_DUTY_DIR_ADV_INIT_MASK, HCI_SUPP_LE_STATES_LO_DUTY_DIR_ADV_INIT_OFF} ,/* lo du dir adv 34 */ |
| {HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_INIT_MASK, HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_INIT_OFF}, /* hi duty dir adv 33 */ |
| {HCI_SUPP_LE_STATES_NON_CONN_INIT_MASK, HCI_SUPP_LE_STATES_NON_CONN_INIT_OFF}, /* non connectable adv */ |
| {HCI_SUPP_LE_STATES_PASS_SCAN_INIT_MASK, HCI_SUPP_LE_STATES_PASS_SCAN_INIT_OFF}, /* passive scan */ |
| {HCI_SUPP_LE_STATES_ACTIVE_SCAN_INIT_MASK, HCI_SUPP_LE_STATES_ACTIVE_SCAN_INIT_OFF}, /* active scan */ |
| {HCI_SUPP_LE_STATES_SCAN_ADV_INIT_MASK, HCI_SUPP_LE_STATES_SCAN_ADV_INIT_OFF} /* scanable adv */ |
| |
| }, |
| { /* master */ |
| {HCI_SUPP_LE_STATES_CONN_ADV_MASTER_MASK, HCI_SUPP_LE_STATES_CONN_ADV_MASTER_OFF}, /* conn_adv: 35 */ |
| {HCI_SUPP_LE_STATES_INIT_MASTER_MASK, HCI_SUPP_LE_STATES_INIT_MASTER_OFF}, /* init 28 */ |
| {HCI_SUPP_LE_STATES_INIT_MASTER_MASK, HCI_SUPP_LE_STATES_INIT_MASTER_OFF}, /* master 28 */ |
| {HCI_SUPP_LE_STATES_CONN_ADV_INIT_MASK, HCI_SUPP_LE_STATES_CONN_ADV_INIT_OFF}, /* slave: 32 */ |
| {HCI_SUPP_LE_STATES_LO_DUTY_DIR_ADV_MASTER_MASK, HCI_SUPP_LE_STATES_LO_DUTY_DIR_ADV_MASTER_OFF}, /* lo duty cycle adv 37 */ |
| {HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_MASTER_MASK, HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_MASTER_OFF}, /* hi duty cycle adv 36 */ |
| {HCI_SUPP_LE_STATES_NON_CONN_ADV_MASTER_MASK, HCI_SUPP_LE_STATES_NON_CONN_ADV_MASTER_OFF}, /* non connectable adv */ |
| {HCI_SUPP_LE_STATES_PASS_SCAN_MASTER_MASK, HCI_SUPP_LE_STATES_PASS_SCAN_MASTER_OFF}, /* passive scan */ |
| {HCI_SUPP_LE_STATES_ACTIVE_SCAN_MASTER_MASK, HCI_SUPP_LE_STATES_ACTIVE_SCAN_MASTER_OFF}, /* active scan */ |
| {HCI_SUPP_LE_STATES_SCAN_ADV_MASTER_MASK, HCI_SUPP_LE_STATES_SCAN_ADV_MASTER_OFF} /* scanable adv */ |
| |
| }, |
| { /* slave */ |
| {HCI_SUPP_LE_STATES_CONN_ADV_SLAVE_MASK, HCI_SUPP_LE_STATES_CONN_ADV_SLAVE_OFF}, /* conn_adv: 38,*/ |
| {HCI_SUPP_LE_STATES_INIT_MASTER_SLAVE_MASK, HCI_SUPP_LE_STATES_INIT_MASTER_SLAVE_OFF}, /* init 41 */ |
| {HCI_SUPP_LE_STATES_INIT_MASTER_SLAVE_MASK, HCI_SUPP_LE_STATES_INIT_MASTER_SLAVE_OFF}, /* master 41 */ |
| {HCI_SUPP_LE_STATES_CONN_ADV_SLAVE_MASK, HCI_SUPP_LE_STATES_CONN_ADV_SLAVE_OFF}, /* slave: 38,*/ |
| {HCI_SUPP_LE_STATES_LO_DUTY_DIR_ADV_SLAVE_MASK, HCI_SUPP_LE_STATES_LO_DUTY_DIR_ADV_SLAVE_OFF}, /* lo duty cycle adv 40 */ |
| {HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_SLAVE_MASK, HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_SLAVE_OFF}, /* hi duty cycle adv 39 */ |
| {HCI_SUPP_LE_STATES_NON_CONN_ADV_SLAVE_MASK, HCI_SUPP_LE_STATES_NON_CONN_ADV_SLAVE_OFF}, /* non connectable adv */ |
| {HCI_SUPP_LE_STATES_PASS_SCAN_SLAVE_MASK, HCI_SUPP_LE_STATES_PASS_SCAN_SLAVE_OFF}, /* passive scan */ |
| {HCI_SUPP_LE_STATES_ACTIVE_SCAN_SLAVE_MASK, HCI_SUPP_LE_STATES_ACTIVE_SCAN_SLAVE_OFF}, /* active scan */ |
| {HCI_SUPP_LE_STATES_SCAN_ADV_SLAVE_MASK, HCI_SUPP_LE_STATES_SCAN_ADV_SLAVE_OFF} /* scanable adv */ |
| |
| }, |
| { /* lo duty cycle adv */ |
| {0, 0}, /* conn_adv: 38,*/ |
| {HCI_SUPP_LE_STATES_LO_DUTY_DIR_ADV_INIT_MASK, HCI_SUPP_LE_STATES_LO_DUTY_DIR_ADV_INIT_OFF} ,/* init 34 */ |
| {HCI_SUPP_LE_STATES_LO_DUTY_DIR_ADV_MASTER_MASK, HCI_SUPP_LE_STATES_LO_DUTY_DIR_ADV_MASTER_OFF}, /* master 37 */ |
| {HCI_SUPP_LE_STATES_LO_DUTY_DIR_ADV_SLAVE_MASK, HCI_SUPP_LE_STATES_LO_DUTY_DIR_ADV_SLAVE_OFF}, /* slave: 40 */ |
| {0, 0}, /* lo duty cycle adv 40 */ |
| {0, 0}, /* hi duty cycle adv 39 */ |
| {0, 0}, /* non connectable adv */ |
| {0, 0}, /* TODO: passive scan, not covered? */ |
| {0, 0}, /* TODO: active scan, not covered? */ |
| {0, 0} /* scanable adv */ |
| }, |
| { /* hi duty cycle adv */ |
| {0, 0}, /* conn_adv: 38,*/ |
| {HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_INIT_MASK, HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_INIT_OFF}, /* init 33 */ |
| {HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_MASTER_MASK, HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_MASTER_OFF}, /* master 36 */ |
| {HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_SLAVE_MASK, HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_SLAVE_OFF}, /* slave: 39*/ |
| {0, 0}, /* lo duty cycle adv 40 */ |
| {0, 0}, /* hi duty cycle adv 39 */ |
| {0, 0}, /* non connectable adv */ |
| {HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_PASS_SCAN_MASK, HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_PASS_SCAN_OFF}, /* passive scan */ |
| {HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_ACTIVE_SCAN_MASK, HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_ACTIVE_SCAN_OFF}, /* active scan */ |
| {0, 0} /* scanable adv */ |
| }, |
| { /* non connectable adv */ |
| {0, 0}, /* conn_adv: */ |
| {HCI_SUPP_LE_STATES_NON_CONN_INIT_MASK, HCI_SUPP_LE_STATES_NON_CONN_INIT_OFF}, /* init */ |
| {HCI_SUPP_LE_STATES_NON_CONN_ADV_MASTER_MASK, HCI_SUPP_LE_STATES_NON_CONN_ADV_MASTER_OFF}, /* master */ |
| {HCI_SUPP_LE_STATES_NON_CONN_ADV_SLAVE_MASK, HCI_SUPP_LE_STATES_NON_CONN_ADV_SLAVE_OFF}, /* slave: */ |
| {0, 0}, /* lo duty cycle adv */ |
| {0, 0}, /* hi duty cycle adv */ |
| {0, 0}, /* non connectable adv */ |
| {HCI_SUPP_LE_STATES_NON_CONN_ADV_PASS_SCAN_MASK, HCI_SUPP_LE_STATES_NON_CONN_ADV_PASS_SCAN_OFF}, /* passive scan */ |
| {HCI_SUPP_LE_STATES_NON_CONN_ADV_ACTIVE_SCAN_MASK, HCI_SUPP_LE_STATES_NON_CONN_ADV_ACTIVE_SCAN_OFF}, /* active scan */ |
| {0, 0} /* scanable adv */ |
| }, |
| { /* passive scan */ |
| {HCI_SUPP_LE_STATES_CONN_ADV_PASS_SCAN_MASK, HCI_SUPP_LE_STATES_CONN_ADV_PASS_SCAN_OFF}, /* conn_adv: */ |
| {HCI_SUPP_LE_STATES_PASS_SCAN_INIT_MASK, HCI_SUPP_LE_STATES_PASS_SCAN_INIT_OFF}, /* init */ |
| {HCI_SUPP_LE_STATES_PASS_SCAN_MASTER_MASK, HCI_SUPP_LE_STATES_PASS_SCAN_MASTER_OFF}, /* master */ |
| {HCI_SUPP_LE_STATES_PASS_SCAN_SLAVE_MASK, HCI_SUPP_LE_STATES_PASS_SCAN_SLAVE_OFF}, /* slave: */ |
| {0, 0}, /* lo duty cycle adv */ |
| {HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_PASS_SCAN_MASK, HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_PASS_SCAN_OFF}, /* hi duty cycle adv */ |
| {HCI_SUPP_LE_STATES_NON_CONN_ADV_PASS_SCAN_MASK, HCI_SUPP_LE_STATES_NON_CONN_ADV_PASS_SCAN_OFF}, /* non connectable adv */ |
| {0, 0}, /* passive scan */ |
| {0, 0}, /* active scan */ |
| {HCI_SUPP_LE_STATES_SCAN_ADV_PASS_SCAN_MASK, HCI_SUPP_LE_STATES_SCAN_ADV_PASS_SCAN_OFF} /* scanable adv */ |
| }, |
| { /* active scan */ |
| {HCI_SUPP_LE_STATES_CONN_ADV_ACTIVE_SCAN_MASK, HCI_SUPP_LE_STATES_CONN_ADV_ACTIVE_SCAN_OFF}, /* conn_adv: */ |
| {HCI_SUPP_LE_STATES_ACTIVE_SCAN_INIT_MASK, HCI_SUPP_LE_STATES_ACTIVE_SCAN_INIT_OFF}, /* init */ |
| {HCI_SUPP_LE_STATES_ACTIVE_SCAN_MASTER_MASK, HCI_SUPP_LE_STATES_ACTIVE_SCAN_MASTER_OFF}, /* master */ |
| {HCI_SUPP_LE_STATES_ACTIVE_SCAN_SLAVE_MASK, HCI_SUPP_LE_STATES_ACTIVE_SCAN_SLAVE_OFF}, /* slave: */ |
| {0, 0}, /* lo duty cycle adv */ |
| {HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_ACTIVE_SCAN_MASK, HCI_SUPP_LE_STATES_HI_DUTY_DIR_ADV_ACTIVE_SCAN_OFF}, /* hi duty cycle adv */ |
| {HCI_SUPP_LE_STATES_NON_CONN_ADV_ACTIVE_SCAN_MASK, HCI_SUPP_LE_STATES_NON_CONN_ADV_ACTIVE_SCAN_OFF}, /* non connectable adv */ |
| {0, 0}, /* TODO: passive scan */ |
| {0, 0}, /* TODO: active scan */ |
| {HCI_SUPP_LE_STATES_SCAN_ADV_ACTIVE_SCAN_MASK, HCI_SUPP_LE_STATES_SCAN_ADV_ACTIVE_SCAN_OFF} /* scanable adv */ |
| }, |
| { /* scanable adv */ |
| {0, 0}, /* conn_adv: */ |
| {HCI_SUPP_LE_STATES_SCAN_ADV_INIT_MASK, HCI_SUPP_LE_STATES_SCAN_ADV_INIT_OFF}, /* init */ |
| {HCI_SUPP_LE_STATES_SCAN_ADV_MASTER_MASK, HCI_SUPP_LE_STATES_SCAN_ADV_MASTER_OFF}, /* master */ |
| {HCI_SUPP_LE_STATES_SCAN_ADV_SLAVE_MASK, HCI_SUPP_LE_STATES_SCAN_ADV_SLAVE_OFF}, /* slave: */ |
| {0, 0}, /* lo duty cycle adv */ |
| {0, 0}, /* hi duty cycle adv */ |
| {0, 0}, /* non connectable adv */ |
| {HCI_SUPP_LE_STATES_SCAN_ADV_PASS_SCAN_MASK, HCI_SUPP_LE_STATES_SCAN_ADV_PASS_SCAN_OFF}, /* passive scan */ |
| {HCI_SUPP_LE_STATES_SCAN_ADV_ACTIVE_SCAN_MASK, HCI_SUPP_LE_STATES_SCAN_ADV_ACTIVE_SCAN_OFF}, /* active scan */ |
| {0, 0} /* scanable adv */ |
| } |
| |
| }; |
| /* check LE combo state supported */ |
| #define BTM_LE_STATES_SUPPORTED(x, y, z) ((x)[(z)] & (y)) |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleUpdateAdvWhitelist |
| ** |
| ** Description Add or remove device from advertising white list |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BOOLEAN BTM_BleUpdateAdvWhitelist(BOOLEAN add_remove, BD_ADDR remote_bda) |
| { |
| UNUSED(add_remove); |
| UNUSED(remote_bda); |
| |
| return FALSE; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleUpdateAdvFilterPolicy |
| ** |
| ** Description This function update the filter policy of advertiser. |
| ** |
| ** Parameter adv_policy: advertising filter policy |
| ** |
| ** Return void |
| *******************************************************************************/ |
| void BTM_BleUpdateAdvFilterPolicy(tBTM_BLE_AFP adv_policy) |
| { |
| tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var; |
| tBLE_ADDR_TYPE init_addr_type = BLE_ADDR_PUBLIC; |
| BD_ADDR p_addr_ptr= {0}; |
| UINT8 adv_mode = p_cb->adv_mode; |
| |
| BTM_TRACE_EVENT ("BTM_BleUpdateAdvFilterPolicy"); |
| |
| if (!controller_get_interface()->supports_ble()) |
| return; |
| |
| if (p_cb->afp != adv_policy) |
| { |
| p_cb->afp = adv_policy; |
| |
| /* if adv active, stop and restart */ |
| btm_ble_stop_adv (); |
| |
| if (p_cb->connectable_mode & BTM_BLE_CONNECTABLE) |
| p_cb->evt_type = btm_set_conn_mode_adv_init_addr(p_cb, p_addr_ptr, &init_addr_type, |
| &p_cb->adv_addr_type); |
| |
| btsnd_hcic_ble_write_adv_params ((UINT16)(p_cb->adv_interval_min ? p_cb->adv_interval_min : |
| BTM_BLE_GAP_ADV_SLOW_INT), |
| (UINT16)(p_cb->adv_interval_max ? p_cb->adv_interval_max : |
| BTM_BLE_GAP_ADV_SLOW_INT), |
| p_cb->evt_type, |
| p_cb->adv_addr_type, |
| init_addr_type, |
| p_addr_ptr, |
| p_cb->adv_chnl_map, |
| p_cb->afp); |
| |
| if (adv_mode == BTM_BLE_ADV_ENABLE) |
| btm_ble_start_adv (); |
| |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_send_extended_scan_params |
| ** |
| ** Description This function sends out the extended scan parameters command to the controller |
| ** |
| ** Parameters scan_type - Scan type |
| ** scan_int - Scan interval |
| ** scan_win - Scan window |
| ** addr_type_own - Own address type |
| ** scan_filter_policy - Scan filter policy |
| ** |
| ** Returns TRUE or FALSE |
| ** |
| *******************************************************************************/ |
| BOOLEAN btm_ble_send_extended_scan_params(UINT8 scan_type, UINT32 scan_int, |
| UINT32 scan_win, UINT8 addr_type_own, |
| UINT8 scan_filter_policy) |
| { |
| UINT8 scan_param[HCIC_PARAM_SIZE_BLE_WRITE_EXTENDED_SCAN_PARAM]; |
| UINT8 *pp_scan = scan_param; |
| |
| memset(scan_param, 0, HCIC_PARAM_SIZE_BLE_WRITE_EXTENDED_SCAN_PARAM); |
| |
| UINT8_TO_STREAM(pp_scan, scan_type); |
| UINT32_TO_STREAM(pp_scan, scan_int); |
| UINT32_TO_STREAM(pp_scan, scan_win); |
| UINT8_TO_STREAM(pp_scan, addr_type_own); |
| UINT8_TO_STREAM(pp_scan, scan_filter_policy); |
| |
| BTM_TRACE_DEBUG("%s, %d, %d", __func__, scan_int, scan_win); |
| if ((BTM_VendorSpecificCommand(HCI_BLE_EXTENDED_SCAN_PARAMS_OCF, |
| HCIC_PARAM_SIZE_BLE_WRITE_EXTENDED_SCAN_PARAM, scan_param, NULL)) != BTM_SUCCESS) |
| { |
| BTM_TRACE_ERROR("%s error sending extended scan parameters", __func__); |
| return FALSE; |
| } |
| return TRUE; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleObserve |
| ** |
| ** Description This procedure keep the device listening for advertising |
| ** events from a broadcast device. |
| ** |
| ** Parameters start: start or stop observe. |
| ** white_list: use white list in observer mode or not. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_BleObserve(BOOLEAN start, UINT8 duration, |
| tBTM_INQ_RESULTS_CB *p_results_cb, tBTM_CMPL_CB *p_cmpl_cb) |
| { |
| tBTM_BLE_INQ_CB *p_inq = &btm_cb.ble_ctr_cb.inq_var; |
| tBTM_STATUS status = BTM_WRONG_MODE; |
| |
| UINT32 scan_interval = !p_inq->scan_interval ? BTM_BLE_GAP_DISC_SCAN_INT : p_inq->scan_interval; |
| UINT32 scan_window = !p_inq->scan_window ? BTM_BLE_GAP_DISC_SCAN_WIN : p_inq->scan_window; |
| |
| BTM_TRACE_EVENT ("%s : scan_type:%d, %d, %d", __func__, btm_cb.btm_inq_vars.scan_type, |
| p_inq->scan_interval, p_inq->scan_window); |
| |
| if (!controller_get_interface()->supports_ble()) |
| return BTM_ILLEGAL_VALUE; |
| |
| if (start) |
| { |
| /* shared inquiry database, do not allow observe if any inquiry is active */ |
| if (BTM_BLE_IS_OBS_ACTIVE(btm_cb.ble_ctr_cb.scan_activity)) |
| { |
| BTM_TRACE_ERROR("%s Observe Already Active", __func__); |
| return status; |
| } |
| |
| btm_cb.ble_ctr_cb.p_obs_results_cb = p_results_cb; |
| btm_cb.ble_ctr_cb.p_obs_cmpl_cb = p_cmpl_cb; |
| status = BTM_CMD_STARTED; |
| |
| /* scan is not started */ |
| if (!BTM_BLE_IS_SCAN_ACTIVE(btm_cb.ble_ctr_cb.scan_activity)) |
| { |
| /* allow config of scan type */ |
| p_inq->scan_type = (p_inq->scan_type == BTM_BLE_SCAN_MODE_NONE) ? |
| BTM_BLE_SCAN_MODE_ACTI: p_inq->scan_type; |
| /* assume observe always not using white list */ |
| #if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE) |
| /* enable resolving list */ |
| btm_ble_enable_resolving_list_for_platform(BTM_BLE_RL_SCAN); |
| #endif |
| |
| if (cmn_ble_vsc_cb.extended_scan_support == 0) |
| { |
| btsnd_hcic_ble_set_scan_params(p_inq->scan_type, (UINT16)scan_interval, |
| (UINT16)scan_window, |
| btm_cb.ble_ctr_cb.addr_mgnt_cb.own_addr_type, |
| BTM_BLE_DEFAULT_SFP); |
| } |
| else |
| { |
| btm_ble_send_extended_scan_params(p_inq->scan_type, scan_interval, scan_window, |
| btm_cb.ble_ctr_cb.addr_mgnt_cb.own_addr_type, |
| BTM_BLE_DEFAULT_SFP); |
| } |
| |
| p_inq->scan_duplicate_filter = BTM_BLE_DUPLICATE_DISABLE; |
| status = btm_ble_start_scan(); |
| } |
| |
| if (status == BTM_CMD_STARTED) |
| { |
| btm_cb.ble_ctr_cb.scan_activity |= BTM_LE_OBSERVE_ACTIVE; |
| if (duration != 0) |
| /* start observer timer */ |
| btu_start_timer (&btm_cb.ble_ctr_cb.obs_timer_ent, BTU_TTYPE_BLE_OBSERVE, duration); |
| } |
| } |
| else if (BTM_BLE_IS_OBS_ACTIVE(btm_cb.ble_ctr_cb.scan_activity)) |
| { |
| status = BTM_CMD_STARTED; |
| btm_ble_stop_observe(); |
| } |
| else |
| { |
| BTM_TRACE_ERROR("%s Observe not active", __func__); |
| } |
| |
| return status; |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleBroadcast |
| ** |
| ** Description This function is to start or stop broadcasting. |
| ** |
| ** Parameters start: start or stop broadcasting. |
| ** |
| ** Returns status. |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_BleBroadcast(BOOLEAN start) |
| { |
| tBTM_STATUS status = BTM_NO_RESOURCES; |
| tBTM_LE_RANDOM_CB *p_addr_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb; |
| tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var; |
| UINT8 evt_type = p_cb->scan_rsp ? BTM_BLE_DISCOVER_EVT: BTM_BLE_NON_CONNECT_EVT; |
| |
| if (!controller_get_interface()->supports_ble()) |
| return BTM_ILLEGAL_VALUE; |
| |
| #ifdef BTM_BLE_PC_ADV_TEST_MODE |
| if (BTM_BLE_PC_ADV_TEST_MODE) |
| { |
| evt_type = p_cb->scan_rsp ? BTM_BLE_CONNECT_EVT: BTM_BLE_NON_CONNECT_EVT; |
| } |
| #endif |
| |
| if (start && p_cb->adv_mode == BTM_BLE_ADV_DISABLE) |
| { |
| /* update adv params */ |
| if (!btsnd_hcic_ble_write_adv_params ((UINT16)(p_cb->adv_interval_min ? p_cb->adv_interval_min : |
| BTM_BLE_GAP_ADV_INT), |
| (UINT16)(p_cb->adv_interval_max ? p_cb->adv_interval_max : |
| BTM_BLE_GAP_ADV_INT), |
| evt_type, |
| p_addr_cb->own_addr_type, |
| p_cb->direct_bda.type, |
| p_cb->direct_bda.bda, |
| p_cb->adv_chnl_map, |
| p_cb->afp)) |
| |
| status = BTM_NO_RESOURCES; |
| else |
| p_cb->evt_type = evt_type; |
| |
| status = btm_ble_start_adv (); |
| } |
| else if (!start) |
| { |
| status = btm_ble_stop_adv(); |
| #if BLE_PRIVACY_SPT == TRUE |
| btm_ble_disable_resolving_list(BTM_BLE_RL_ADV, TRUE); |
| #endif |
| } |
| else |
| { |
| status = BTM_WRONG_MODE; |
| BTM_TRACE_ERROR("Can not %s Broadcast, device %s in Broadcast mode", |
| (start ? "Start" : "Stop"), (start ? "already" :"not")); |
| } |
| return status; |
| } |
| |
| #if BLE_VND_INCLUDED == TRUE |
| /******************************************************************************* |
| ** |
| ** Function btm_vsc_brcm_features_complete |
| ** |
| ** Description Command Complete callback for HCI_BLE_VENDOR_CAP_OCF |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void btm_ble_vendor_capability_vsc_cmpl_cback (tBTM_VSC_CMPL *p_vcs_cplt_params) |
| { |
| UINT8 status = 0xFF; |
| UINT8 *p; |
| |
| BTM_TRACE_DEBUG("%s", __func__); |
| |
| /* Check status of command complete event */ |
| if ((p_vcs_cplt_params->opcode == HCI_BLE_VENDOR_CAP_OCF) && |
| (p_vcs_cplt_params->param_len > 0)) |
| { |
| p = p_vcs_cplt_params->p_param_buf; |
| STREAM_TO_UINT8(status, p); |
| } |
| |
| if (status == HCI_SUCCESS) |
| { |
| STREAM_TO_UINT8(btm_cb.cmn_ble_vsc_cb.adv_inst_max, p); |
| STREAM_TO_UINT8(btm_cb.cmn_ble_vsc_cb.rpa_offloading, p); |
| STREAM_TO_UINT16(btm_cb.cmn_ble_vsc_cb.tot_scan_results_strg, p); |
| STREAM_TO_UINT8(btm_cb.cmn_ble_vsc_cb.max_irk_list_sz, p); |
| STREAM_TO_UINT8(btm_cb.cmn_ble_vsc_cb.filter_support, p); |
| STREAM_TO_UINT8(btm_cb.cmn_ble_vsc_cb.max_filter, p); |
| STREAM_TO_UINT8(btm_cb.cmn_ble_vsc_cb.energy_support, p); |
| |
| if (p_vcs_cplt_params->param_len > BTM_VSC_CHIP_CAPABILITY_RSP_LEN_L_RELEASE) |
| { |
| STREAM_TO_UINT16(btm_cb.cmn_ble_vsc_cb.version_supported, p); |
| } |
| else |
| { |
| btm_cb.cmn_ble_vsc_cb.version_supported = BTM_VSC_CHIP_CAPABILITY_L_VERSION; |
| } |
| |
| if (btm_cb.cmn_ble_vsc_cb.version_supported == BTM_VSC_CHIP_CAPABILITY_M_VERSION) |
| { |
| STREAM_TO_UINT16(btm_cb.cmn_ble_vsc_cb.total_trackable_advertisers, p); |
| STREAM_TO_UINT16(btm_cb.cmn_ble_vsc_cb.extended_scan_support, p); |
| STREAM_TO_UINT16(btm_cb.cmn_ble_vsc_cb.debug_logging_supported, p); |
| } |
| btm_cb.cmn_ble_vsc_cb.values_read = TRUE; |
| } |
| |
| BTM_TRACE_DEBUG("%s: stat=%d, irk=%d, ADV ins:%d, rpa=%d, ener=%d, ext_scan=%d", |
| __func__, status, btm_cb.cmn_ble_vsc_cb.max_irk_list_sz, |
| btm_cb.cmn_ble_vsc_cb.adv_inst_max, btm_cb.cmn_ble_vsc_cb.rpa_offloading, |
| btm_cb.cmn_ble_vsc_cb.energy_support, btm_cb.cmn_ble_vsc_cb.extended_scan_support); |
| |
| if (BTM_BleMaxMultiAdvInstanceCount() > 0) |
| btm_ble_multi_adv_init(); |
| |
| if (btm_cb.cmn_ble_vsc_cb.max_filter > 0) |
| btm_ble_adv_filter_init(); |
| |
| #if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE) |
| /* VS capability included and non-4.2 device */ |
| if (btm_cb.cmn_ble_vsc_cb.max_irk_list_sz > 0 && |
| controller_get_interface()->get_ble_resolving_list_max_size() == 0) |
| btm_ble_resolving_list_init(btm_cb.cmn_ble_vsc_cb.max_irk_list_sz); |
| #endif /* (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE) */ |
| |
| if (btm_cb.cmn_ble_vsc_cb.tot_scan_results_strg > 0) |
| btm_ble_batchscan_init(); |
| |
| if (p_ctrl_le_feature_rd_cmpl_cback != NULL) |
| p_ctrl_le_feature_rd_cmpl_cback(status); |
| } |
| #endif /* BLE_VND_INCLUDED == TRUE */ |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleGetVendorCapabilities |
| ** |
| ** Description This function reads local LE features |
| ** |
| ** Parameters p_cmn_vsc_cb : Locala LE capability structure |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| extern void BTM_BleGetVendorCapabilities(tBTM_BLE_VSC_CB *p_cmn_vsc_cb) |
| { |
| BTM_TRACE_DEBUG("BTM_BleGetVendorCapabilities"); |
| |
| if (NULL != p_cmn_vsc_cb) |
| { |
| *p_cmn_vsc_cb = btm_cb.cmn_ble_vsc_cb; |
| } |
| } |
| |
| /****************************************************************************** |
| ** |
| ** Function BTM_BleReadControllerFeatures |
| ** |
| ** Description Reads BLE specific controller features |
| ** |
| ** Parameters: tBTM_BLE_CTRL_FEATURES_CBACK : Callback to notify when features are read |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| extern void BTM_BleReadControllerFeatures(tBTM_BLE_CTRL_FEATURES_CBACK *p_vsc_cback) |
| { |
| if (TRUE == btm_cb.cmn_ble_vsc_cb.values_read) |
| return; |
| |
| #if BLE_VND_INCLUDED == TRUE |
| BTM_TRACE_DEBUG("BTM_BleReadControllerFeatures"); |
| |
| p_ctrl_le_feature_rd_cmpl_cback = p_vsc_cback; |
| if ( BTM_VendorSpecificCommand (HCI_BLE_VENDOR_CAP_OCF, |
| 0, |
| NULL, |
| btm_ble_vendor_capability_vsc_cmpl_cback) |
| != BTM_CMD_STARTED) |
| { |
| BTM_TRACE_ERROR("LE Get_Vendor Capabilities Command Failed."); |
| } |
| #else |
| UNUSED(p_vsc_cback); |
| #endif |
| return ; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleEnableMixedPrivacyMode |
| ** |
| ** Description This function is called to enabled Mixed mode if privacy 1.2 |
| ** is applicable in controller. |
| ** |
| ** Parameters mixed_on: mixed mode to be used or not. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTM_BleEnableMixedPrivacyMode(BOOLEAN mixed_on) |
| { |
| |
| #if BLE_PRIVACY_SPT == TRUE |
| btm_cb.ble_ctr_cb.mixed_mode = mixed_on; |
| |
| /* TODO: send VSC to enabled mixed mode */ |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleConfigPrivacy |
| ** |
| ** Description This function is called to enable or disable the privacy in |
| ** LE channel of the local device. |
| ** |
| ** Parameters privacy_mode: privacy mode on or off. |
| ** |
| ** Returns BOOLEAN privacy mode set success; otherwise failed. |
| ** |
| *******************************************************************************/ |
| BOOLEAN BTM_BleConfigPrivacy(BOOLEAN privacy_mode) |
| { |
| #if BLE_PRIVACY_SPT == TRUE |
| tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb; |
| |
| BTM_TRACE_EVENT ("%s", __func__); |
| |
| /* if LE is not supported, return error */ |
| if (!controller_get_interface()->supports_ble()) |
| return FALSE; |
| |
| uint8_t addr_resolution = 0; |
| if(!privacy_mode)/* if privacy disabled, always use public address */ |
| { |
| p_cb->addr_mgnt_cb.own_addr_type = BLE_ADDR_PUBLIC; |
| p_cb->privacy_mode = BTM_PRIVACY_NONE; |
| } |
| else /* privacy is turned on*/ |
| { |
| /* always set host random address, used when privacy 1.1 or priavcy 1.2 is disabled */ |
| p_cb->addr_mgnt_cb.own_addr_type = BLE_ADDR_RANDOM; |
| btm_gen_resolvable_private_addr((void *)btm_gen_resolve_paddr_low); |
| |
| if (BTM_BleMaxMultiAdvInstanceCount() > 0) |
| btm_ble_multi_adv_enb_privacy(privacy_mode); |
| |
| /* 4.2 controller only allow privacy 1.2 or mixed mode, resolvable private address in controller */ |
| if (controller_get_interface()->supports_ble_privacy()) |
| { |
| addr_resolution = 1; |
| /* check vendor specific capability */ |
| p_cb->privacy_mode = btm_cb.ble_ctr_cb.mixed_mode ? BTM_PRIVACY_MIXED : BTM_PRIVACY_1_2; |
| } |
| else /* 4.1/4.0 controller */ |
| p_cb->privacy_mode = BTM_PRIVACY_1_1; |
| } |
| |
| GAP_BleAttrDBUpdate (GATT_UUID_GAP_CENTRAL_ADDR_RESOL, (tGAP_BLE_ATTR_VALUE *)&addr_resolution); |
| |
| return TRUE; |
| #else |
| return FALSE; |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleMaxMultiAdvInstanceCount |
| ** |
| ** Description Returns max number of multi adv instances supported by controller |
| ** |
| ** Returns Max multi adv instance count |
| ** |
| *******************************************************************************/ |
| extern UINT8 BTM_BleMaxMultiAdvInstanceCount(void) |
| { |
| return btm_cb.cmn_ble_vsc_cb.adv_inst_max < BTM_BLE_MULTI_ADV_MAX ? |
| btm_cb.cmn_ble_vsc_cb.adv_inst_max : BTM_BLE_MULTI_ADV_MAX; |
| } |
| |
| #if BLE_PRIVACY_SPT == TRUE |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_resolve_random_addr_on_adv |
| ** |
| ** Description resolve random address complete callback. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void btm_ble_resolve_random_addr_on_adv(void * p_rec, void *p) |
| { |
| tBTM_SEC_DEV_REC *match_rec = (tBTM_SEC_DEV_REC *) p_rec; |
| UINT8 addr_type = BLE_ADDR_RANDOM; |
| BD_ADDR bda; |
| UINT8 *pp = (UINT8 *)p + 1; |
| UINT8 evt_type; |
| |
| BTM_TRACE_EVENT ("btm_ble_resolve_random_addr_on_adv "); |
| |
| STREAM_TO_UINT8 (evt_type, pp); |
| STREAM_TO_UINT8 (addr_type, pp); |
| STREAM_TO_BDADDR (bda, pp); |
| |
| if (match_rec) |
| { |
| BTM_TRACE_DEBUG("Random match"); |
| match_rec->ble.active_addr_type = BTM_BLE_ADDR_RRA; |
| memcpy(match_rec->ble.cur_rand_addr, bda, BD_ADDR_LEN); |
| memcpy(bda, match_rec->bd_addr, BD_ADDR_LEN); |
| addr_type = match_rec->ble.ble_addr_type; |
| } |
| |
| btm_ble_process_adv_pkt_cont(bda, addr_type, evt_type, pp); |
| |
| return; |
| } |
| #endif |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleLocalPrivacyEnabled |
| ** |
| ** Description Checks if local device supports private address |
| ** |
| ** Returns Return TRUE if local privacy is enabled else FALSE |
| ** |
| *******************************************************************************/ |
| BOOLEAN BTM_BleLocalPrivacyEnabled(void) |
| { |
| #if BLE_PRIVACY_SPT == TRUE |
| return (btm_cb.ble_ctr_cb.privacy_mode != BTM_PRIVACY_NONE); |
| #else |
| return false; |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetBgConnType |
| ** |
| ** Description This function is called to set BLE connectable mode for a |
| ** peripheral device. |
| ** |
| ** Parameters bg_conn_type: it can be auto connection, or selective connection. |
| ** p_select_cback: callback function when selective connection procedure |
| ** is being used. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BOOLEAN BTM_BleSetBgConnType(tBTM_BLE_CONN_TYPE bg_conn_type, |
| tBTM_BLE_SEL_CBACK *p_select_cback) |
| { |
| BOOLEAN started = TRUE; |
| |
| BTM_TRACE_EVENT ("BTM_BleSetBgConnType "); |
| if (!controller_get_interface()->supports_ble()) |
| return FALSE; |
| |
| if (btm_cb.ble_ctr_cb.bg_conn_type != bg_conn_type) |
| { |
| switch (bg_conn_type) |
| { |
| case BTM_BLE_CONN_AUTO: |
| btm_ble_start_auto_conn(TRUE); |
| break; |
| |
| case BTM_BLE_CONN_SELECTIVE: |
| if (btm_cb.ble_ctr_cb.bg_conn_type == BTM_BLE_CONN_AUTO) |
| { |
| btm_ble_start_auto_conn(FALSE); |
| } |
| btm_ble_start_select_conn(TRUE, p_select_cback); |
| break; |
| |
| case BTM_BLE_CONN_NONE: |
| if (btm_cb.ble_ctr_cb.bg_conn_type == BTM_BLE_CONN_AUTO) |
| { |
| btm_ble_start_auto_conn(FALSE); |
| } |
| else if (btm_cb.ble_ctr_cb.bg_conn_type == BTM_BLE_CONN_SELECTIVE) |
| { |
| btm_ble_start_select_conn(FALSE, NULL); |
| } |
| started = TRUE; |
| break; |
| |
| default: |
| BTM_TRACE_ERROR("invalid bg connection type : %d ", bg_conn_type); |
| started = FALSE; |
| break; |
| } |
| |
| if (started) |
| btm_cb.ble_ctr_cb.bg_conn_type = bg_conn_type; |
| } |
| return started; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleClearBgConnDev |
| ** |
| ** Description This function is called to clear the whitelist, |
| ** end any pending whitelist connections, |
| * and reset the local bg device list. |
| ** |
| ** Parameters void |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTM_BleClearBgConnDev(void) |
| { |
| btm_ble_start_auto_conn(FALSE); |
| btm_ble_clear_white_list(); |
| gatt_reset_bgdev_list(); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleUpdateBgConnDev |
| ** |
| ** Description This function is called to add or remove a device into/from |
| ** background connection procedure. The background connection |
| * procedure is decided by the background connection type, it can be |
| * auto connection, or selective connection. |
| ** |
| ** Parameters add_remove: TRUE to add; FALSE to remove. |
| ** remote_bda: device address to add/remove. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BOOLEAN BTM_BleUpdateBgConnDev(BOOLEAN add_remove, BD_ADDR remote_bda) |
| { |
| BTM_TRACE_EVENT("%s() add=%d", __func__, add_remove); |
| return btm_update_dev_to_white_list(add_remove, remote_bda); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetConnectableMode |
| ** |
| ** Description This function is called to set BLE connectable mode for a |
| ** peripheral device. |
| ** |
| ** Parameters conn_mode: directed connectable mode, or non-directed.It can |
| ** be BTM_BLE_CONNECT_EVT, BTM_BLE_CONNECT_DIR_EVT or |
| ** BTM_BLE_CONNECT_LO_DUTY_DIR_EVT |
| ** |
| ** Returns BTM_ILLEGAL_VALUE if controller does not support BLE. |
| ** BTM_SUCCESS is status set successfully; otherwise failure. |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_BleSetConnectableMode(tBTM_BLE_CONN_MODE connectable_mode) |
| { |
| tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var; |
| |
| BTM_TRACE_EVENT ("%s connectable_mode = %d ", __func__, connectable_mode); |
| if (!controller_get_interface()->supports_ble()) |
| return BTM_ILLEGAL_VALUE; |
| |
| p_cb->directed_conn = connectable_mode; |
| return btm_ble_set_connectability( p_cb->connectable_mode); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_set_conn_mode_adv_init_addr |
| ** |
| ** Description set initator address type and local address type based on adv |
| ** mode. |
| ** |
| ** |
| *******************************************************************************/ |
| static UINT8 btm_set_conn_mode_adv_init_addr(tBTM_BLE_INQ_CB *p_cb, |
| BD_ADDR_PTR p_peer_addr_ptr, |
| tBLE_ADDR_TYPE *p_peer_addr_type, |
| tBLE_ADDR_TYPE *p_own_addr_type) |
| { |
| UINT8 evt_type, i = BTM_SEC_MAX_DEVICE_RECORDS; |
| tBTM_SEC_DEV_REC *p_dev_rec; |
| |
| evt_type = (p_cb->connectable_mode == BTM_BLE_NON_CONNECTABLE) ? \ |
| ((p_cb->scan_rsp) ? BTM_BLE_DISCOVER_EVT : BTM_BLE_NON_CONNECT_EVT )\ |
| : BTM_BLE_CONNECT_EVT; |
| |
| if (evt_type == BTM_BLE_CONNECT_EVT) |
| { |
| evt_type = p_cb->directed_conn; |
| |
| if ( p_cb->directed_conn == BTM_BLE_CONNECT_DIR_EVT || |
| p_cb->directed_conn == BTM_BLE_CONNECT_LO_DUTY_DIR_EVT) |
| { |
| |
| #if BLE_PRIVACY_SPT == TRUE |
| /* for privacy 1.2, convert peer address as static, own address set as ID addr */ |
| if (btm_cb.ble_ctr_cb.privacy_mode == BTM_PRIVACY_1_2 || |
| btm_cb.ble_ctr_cb.privacy_mode == BTM_PRIVACY_MIXED) |
| { |
| /* only do so for bonded device */ |
| if ((p_dev_rec = btm_find_or_alloc_dev (p_cb->direct_bda.bda)) != NULL && |
| p_dev_rec->ble.in_controller_list & BTM_RESOLVING_LIST_BIT) |
| { |
| btm_ble_enable_resolving_list(BTM_BLE_RL_ADV); |
| memcpy(p_peer_addr_ptr, p_dev_rec->ble.static_addr, BD_ADDR_LEN); |
| *p_peer_addr_type = p_dev_rec->ble.static_addr_type; |
| *p_own_addr_type = BLE_ADDR_RANDOM_ID; |
| return evt_type; |
| } |
| /* otherwise fall though as normal directed adv */ |
| else |
| { |
| btm_ble_disable_resolving_list(BTM_BLE_RL_ADV, TRUE); |
| } |
| } |
| #endif |
| /* direct adv mode does not have privacy, if privacy is not enabled */ |
| *p_peer_addr_type = p_cb->direct_bda.type; |
| memcpy(p_peer_addr_ptr, p_cb->direct_bda.bda, BD_ADDR_LEN); |
| return evt_type; |
| } |
| } |
| |
| /* undirect adv mode or non-connectable mode*/ |
| #if BLE_PRIVACY_SPT == TRUE |
| /* when privacy 1.2 privacy only mode is used, or mixed mode */ |
| if ((btm_cb.ble_ctr_cb.privacy_mode == BTM_PRIVACY_1_2 && p_cb->afp != AP_SCAN_CONN_ALL) || |
| btm_cb.ble_ctr_cb.privacy_mode == BTM_PRIVACY_MIXED) |
| { |
| /* if enhanced privacy is required, set Identity address and matching IRK peer */ |
| for (i = 0; i < BTM_SEC_MAX_DEVICE_RECORDS; i ++) |
| { |
| if ((btm_cb.sec_dev_rec[i].sec_flags & BTM_SEC_IN_USE) != 0 && |
| (btm_cb.sec_dev_rec[i].ble.in_controller_list & BTM_RESOLVING_LIST_BIT) != 0) |
| { |
| memcpy(p_peer_addr_ptr, btm_cb.sec_dev_rec[i].ble.static_addr, BD_ADDR_LEN); |
| *p_peer_addr_type = btm_cb.sec_dev_rec[i].ble.static_addr_type; |
| break; |
| } |
| } |
| |
| if (i != BTM_SEC_MAX_DEVICE_RECORDS) |
| *p_own_addr_type = BLE_ADDR_RANDOM_ID; |
| else |
| /* resolving list is empty, not enabled */ |
| *p_own_addr_type = BLE_ADDR_RANDOM; |
| } |
| /* privacy 1.1, or privacy 1.2, general discoverable/connectable mode, disable privacy in */ |
| /* controller fall back to host based privacy */ |
| else if (btm_cb.ble_ctr_cb.privacy_mode != BTM_PRIVACY_NONE) |
| { |
| *p_own_addr_type = BLE_ADDR_RANDOM; |
| } |
| #endif |
| |
| /* if no privacy,do not set any peer address,*/ |
| /* local address type go by global privacy setting */ |
| return evt_type; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetAdvParams |
| ** |
| ** Description This function is called to set advertising parameters. |
| ** |
| ** Parameters adv_int_min: minimum advertising interval |
| ** adv_int_max: maximum advertising interval |
| ** p_dir_bda: connectable direct initiator's LE device address |
| ** chnl_map: advertising channel map. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_BleSetAdvParams(UINT16 adv_int_min, UINT16 adv_int_max, |
| tBLE_BD_ADDR *p_dir_bda, |
| tBTM_BLE_ADV_CHNL_MAP chnl_map) |
| { |
| tBTM_LE_RANDOM_CB *p_addr_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb; |
| tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var; |
| tBTM_STATUS status = BTM_SUCCESS; |
| BD_ADDR p_addr_ptr = {0}; |
| tBLE_ADDR_TYPE init_addr_type = BLE_ADDR_PUBLIC; |
| tBLE_ADDR_TYPE own_addr_type = p_addr_cb->own_addr_type; |
| UINT8 adv_mode = p_cb->adv_mode; |
| |
| BTM_TRACE_EVENT ("BTM_BleSetAdvParams"); |
| |
| if (!controller_get_interface()->supports_ble()) |
| return BTM_ILLEGAL_VALUE; |
| |
| if (!BTM_BLE_ISVALID_PARAM(adv_int_min, BTM_BLE_ADV_INT_MIN, BTM_BLE_ADV_INT_MAX) || |
| !BTM_BLE_ISVALID_PARAM(adv_int_max, BTM_BLE_ADV_INT_MIN, BTM_BLE_ADV_INT_MAX)) |
| { |
| return BTM_ILLEGAL_VALUE; |
| } |
| |
| p_cb->adv_interval_min = adv_int_min; |
| p_cb->adv_interval_max = adv_int_max; |
| p_cb->adv_chnl_map = chnl_map; |
| |
| if (p_dir_bda) |
| { |
| memcpy(&p_cb->direct_bda, p_dir_bda, sizeof(tBLE_BD_ADDR)); |
| } |
| |
| BTM_TRACE_EVENT ("update params for an active adv"); |
| |
| btm_ble_stop_adv(); |
| |
| p_cb->evt_type = btm_set_conn_mode_adv_init_addr(p_cb, p_addr_ptr, &init_addr_type, |
| &own_addr_type); |
| |
| /* update adv params */ |
| btsnd_hcic_ble_write_adv_params (p_cb->adv_interval_min, |
| p_cb->adv_interval_max, |
| p_cb->evt_type, |
| own_addr_type, |
| init_addr_type, |
| p_addr_ptr, |
| p_cb->adv_chnl_map, |
| p_cb->afp); |
| |
| if (adv_mode == BTM_BLE_ADV_ENABLE) |
| btm_ble_start_adv(); |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleReadAdvParams |
| ** |
| ** Description This function is called to set advertising parameters. |
| ** |
| ** Parameters adv_int_min: minimum advertising interval |
| ** adv_int_max: maximum advertising interval |
| ** p_dir_bda: connectable direct initiator's LE device address |
| ** chnl_map: advertising channel map. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTM_BleReadAdvParams (UINT16 *adv_int_min, UINT16 *adv_int_max, |
| tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP *p_chnl_map) |
| { |
| tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var; |
| |
| BTM_TRACE_EVENT ("BTM_BleReadAdvParams "); |
| if (!controller_get_interface()->supports_ble()) |
| return ; |
| |
| *adv_int_min = p_cb->adv_interval_min; |
| *adv_int_max = p_cb->adv_interval_max; |
| *p_chnl_map = p_cb->adv_chnl_map; |
| |
| if (p_dir_bda != NULL) |
| { |
| memcpy(p_dir_bda, &p_cb->direct_bda, sizeof(tBLE_BD_ADDR)); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetScanParams |
| ** |
| ** Description This function is called to set scan parameters. |
| ** |
| ** Parameters client_if - Client IF |
| ** scan_interval - Scan interval |
| ** scan_window - Scan window |
| ** scan_mode - Scan mode |
| ** scan_setup_status_cback - Scan param setup status callback |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTM_BleSetScanParams(tGATT_IF client_if, UINT32 scan_interval, UINT32 scan_window, |
| tBLE_SCAN_MODE scan_mode, |
| tBLE_SCAN_PARAM_SETUP_CBACK scan_setup_status_cback) |
| { |
| tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var; |
| UINT32 max_scan_interval; |
| UINT32 max_scan_window; |
| |
| BTM_TRACE_EVENT ("%s", __func__); |
| if (!controller_get_interface()->supports_ble()) |
| return; |
| |
| /* If not supporting extended scan support, use the older range for checking */ |
| if (btm_cb.cmn_ble_vsc_cb.extended_scan_support == 0) |
| { |
| max_scan_interval = BTM_BLE_SCAN_INT_MAX; |
| max_scan_window = BTM_BLE_SCAN_WIN_MAX; |
| } |
| else |
| { |
| /* If supporting extended scan support, use the new extended range for checking */ |
| max_scan_interval = BTM_BLE_EXT_SCAN_INT_MAX; |
| max_scan_window = BTM_BLE_EXT_SCAN_WIN_MAX; |
| } |
| |
| if (BTM_BLE_ISVALID_PARAM(scan_interval, BTM_BLE_SCAN_INT_MIN, max_scan_interval) && |
| BTM_BLE_ISVALID_PARAM(scan_window, BTM_BLE_SCAN_WIN_MIN, max_scan_window) && |
| (scan_mode == BTM_BLE_SCAN_MODE_ACTI || scan_mode == BTM_BLE_SCAN_MODE_PASS)) |
| { |
| p_cb->scan_type = scan_mode; |
| p_cb->scan_interval = scan_interval; |
| p_cb->scan_window = scan_window; |
| |
| if (scan_setup_status_cback != NULL) |
| scan_setup_status_cback(client_if, BTM_SUCCESS); |
| } |
| else |
| { |
| if (scan_setup_status_cback != NULL) |
| scan_setup_status_cback(client_if, BTM_ILLEGAL_VALUE); |
| |
| BTM_TRACE_ERROR("Illegal params: scan_interval = %d scan_window = %d", |
| scan_interval, scan_window); |
| } |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleWriteScanRsp |
| ** |
| ** Description This function is called to write LE scan response. |
| ** |
| ** Parameters: p_scan_rsp: scan response information. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_BleWriteScanRsp(tBTM_BLE_AD_MASK data_mask, tBTM_BLE_ADV_DATA *p_data) |
| { |
| tBTM_STATUS status = BTM_NO_RESOURCES; |
| UINT8 rsp_data[BTM_BLE_AD_DATA_LEN], |
| *p = rsp_data; |
| |
| BTM_TRACE_EVENT (" BTM_BleWriteScanRsp"); |
| |
| if (!controller_get_interface()->supports_ble()) |
| return BTM_ILLEGAL_VALUE; |
| |
| memset(rsp_data, 0, BTM_BLE_AD_DATA_LEN); |
| btm_ble_build_adv_data(&data_mask, &p, p_data); |
| |
| if (btsnd_hcic_ble_set_scan_rsp_data((UINT8)(p - rsp_data), rsp_data)) |
| { |
| status = BTM_SUCCESS; |
| |
| if (data_mask != 0) |
| btm_cb.ble_ctr_cb.inq_var.scan_rsp = TRUE; |
| else |
| btm_cb.ble_ctr_cb.inq_var.scan_rsp = FALSE; |
| } |
| else |
| status = BTM_ILLEGAL_VALUE; |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleWriteAdvData |
| ** |
| ** Description This function is called to write advertising data. |
| ** |
| ** Parameters: None. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_BleWriteAdvData(tBTM_BLE_AD_MASK data_mask, tBTM_BLE_ADV_DATA *p_data) |
| { |
| tBTM_BLE_LOCAL_ADV_DATA *p_cb_data = &btm_cb.ble_ctr_cb.inq_var.adv_data; |
| UINT8 *p; |
| tBTM_BLE_AD_MASK mask = data_mask; |
| |
| BTM_TRACE_EVENT ("BTM_BleWriteAdvData "); |
| |
| if (!controller_get_interface()->supports_ble()) |
| return BTM_ILLEGAL_VALUE; |
| |
| memset(p_cb_data, 0, sizeof(tBTM_BLE_LOCAL_ADV_DATA)); |
| p = p_cb_data->ad_data; |
| p_cb_data->data_mask = data_mask; |
| |
| p_cb_data->p_flags = btm_ble_build_adv_data(&mask, &p, p_data); |
| |
| p_cb_data->p_pad = p; |
| |
| if (mask != 0) |
| { |
| BTM_TRACE_ERROR("Partial data write into ADV"); |
| } |
| |
| p_cb_data->data_mask &= ~mask; |
| |
| if (btsnd_hcic_ble_set_adv_data((UINT8)(p_cb_data->p_pad - p_cb_data->ad_data), |
| p_cb_data->ad_data)) |
| return BTM_SUCCESS; |
| else |
| return BTM_NO_RESOURCES; |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_CheckAdvData |
| ** |
| ** Description This function is called to get ADV data for a specific type. |
| ** |
| ** Parameters p_adv - pointer of ADV data |
| ** type - finding ADV data type |
| ** p_length - return the length of ADV data not including type |
| ** |
| ** Returns pointer of ADV data |
| ** |
| *******************************************************************************/ |
| UINT8 *BTM_CheckAdvData( UINT8 *p_adv, UINT8 type, UINT8 *p_length) |
| { |
| UINT8 *p = p_adv; |
| UINT8 length; |
| UINT8 adv_type; |
| BTM_TRACE_API("BTM_CheckAdvData type=0x%02X", type); |
| |
| STREAM_TO_UINT8(length, p); |
| |
| while ( length && (p - p_adv <= BTM_BLE_CACHE_ADV_DATA_MAX)) |
| { |
| STREAM_TO_UINT8(adv_type, p); |
| |
| if ( adv_type == type ) |
| { |
| /* length doesn't include itself */ |
| *p_length = length - 1; /* minus the length of type */ |
| return p; |
| } |
| p += length - 1; /* skip the length of data */ |
| STREAM_TO_UINT8(length, p); |
| } |
| |
| *p_length = 0; |
| return NULL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_build_adv_data |
| ** |
| ** Description This function is called build the adv data and rsp data. |
| *******************************************************************************/ |
| UINT8 *btm_ble_build_adv_data(tBTM_BLE_AD_MASK *p_data_mask, UINT8 **p_dst, |
| tBTM_BLE_ADV_DATA *p_data) |
| { |
| UINT32 data_mask = *p_data_mask; |
| UINT8 *p = *p_dst, |
| *p_flag = NULL; |
| UINT16 len = BTM_BLE_AD_DATA_LEN, cp_len = 0; |
| UINT8 i = 0; |
| tBTM_BLE_PROP_ELEM *p_elem; |
| |
| BTM_TRACE_EVENT (" btm_ble_build_adv_data"); |
| |
| /* build the adv data structure and build the data string */ |
| if (data_mask) |
| { |
| /* flags */ |
| if (data_mask & BTM_BLE_AD_BIT_FLAGS) |
| { |
| *p++ = MIN_ADV_LENGTH; |
| *p++ = BTM_BLE_AD_TYPE_FLAG; |
| p_flag = p; |
| if (p_data) |
| *p++ = p_data->flag; |
| else |
| *p++ = 0; |
| |
| len -= 3; |
| |
| data_mask &= ~BTM_BLE_AD_BIT_FLAGS; |
| } |
| /* appearance data */ |
| if (len > 3 && data_mask & BTM_BLE_AD_BIT_APPEARANCE) |
| { |
| *p++ = 3; /* length */ |
| *p++ = BTM_BLE_AD_TYPE_APPEARANCE; |
| UINT16_TO_STREAM(p, p_data->appearance); |
| len -= 4; |
| |
| data_mask &= ~BTM_BLE_AD_BIT_APPEARANCE; |
| } |
| /* device name */ |
| #if BTM_MAX_LOC_BD_NAME_LEN > 0 |
| if (len > MIN_ADV_LENGTH && data_mask & BTM_BLE_AD_BIT_DEV_NAME) |
| { |
| if (strlen(btm_cb.cfg.bd_name) > (UINT16)(len - MIN_ADV_LENGTH)) |
| { |
| *p++ = len - MIN_ADV_LENGTH + 1; |
| *p++ = BTM_BLE_AD_TYPE_NAME_SHORT; |
| ARRAY_TO_STREAM(p, btm_cb.cfg.bd_name, len - MIN_ADV_LENGTH); |
| } |
| else |
| { |
| cp_len = (UINT16)strlen(btm_cb.cfg.bd_name); |
| *p++ = cp_len + 1; |
| *p++ = BTM_BLE_AD_TYPE_NAME_CMPL; |
| ARRAY_TO_STREAM(p, btm_cb.cfg.bd_name, cp_len); |
| } |
| len -= (cp_len + MIN_ADV_LENGTH); |
| data_mask &= ~BTM_BLE_AD_BIT_DEV_NAME; |
| } |
| #endif |
| /* manufacturer data */ |
| if (len > MIN_ADV_LENGTH && data_mask & BTM_BLE_AD_BIT_MANU && |
| p_data && p_data->p_manu && |
| p_data->p_manu->len != 0 && p_data->p_manu->p_val) |
| { |
| if (p_data->p_manu->len > (len - MIN_ADV_LENGTH)) |
| cp_len = len - MIN_ADV_LENGTH; |
| else |
| cp_len = p_data->p_manu->len; |
| |
| *p++ = cp_len + 1; |
| *p++ = BTM_BLE_AD_TYPE_MANU; |
| ARRAY_TO_STREAM(p, p_data->p_manu->p_val, cp_len); |
| |
| len -= (cp_len + MIN_ADV_LENGTH); |
| data_mask &= ~BTM_BLE_AD_BIT_MANU; |
| } |
| /* TX power */ |
| if (len > MIN_ADV_LENGTH && data_mask & BTM_BLE_AD_BIT_TX_PWR) |
| { |
| *p++ = MIN_ADV_LENGTH; |
| *p++ = BTM_BLE_AD_TYPE_TX_PWR; |
| if (p_data->tx_power > BTM_BLE_ADV_TX_POWER_MAX) |
| p_data->tx_power = BTM_BLE_ADV_TX_POWER_MAX; |
| *p++ = btm_ble_map_adv_tx_power(p_data->tx_power); |
| len -= 3; |
| data_mask &= ~BTM_BLE_AD_BIT_TX_PWR; |
| } |
| /* 16 bits services */ |
| if (len > MIN_ADV_LENGTH && data_mask & BTM_BLE_AD_BIT_SERVICE && |
| p_data && p_data->p_services && |
| p_data->p_services->num_service != 0 && |
| p_data->p_services->p_uuid) |
| { |
| if (p_data->p_services->num_service * LEN_UUID_16 > (len - MIN_ADV_LENGTH)) |
| { |
| cp_len = (len - MIN_ADV_LENGTH)/LEN_UUID_16; |
| *p ++ = 1 + cp_len * LEN_UUID_16; |
| *p++ = BTM_BLE_AD_TYPE_16SRV_PART; |
| } |
| else |
| { |
| cp_len = p_data->p_services->num_service; |
| *p++ = 1 + cp_len * LEN_UUID_16; |
| *p++ = BTM_BLE_AD_TYPE_16SRV_CMPL; |
| } |
| for (i = 0; i < cp_len; i ++) |
| { |
| UINT16_TO_STREAM(p, *(p_data->p_services->p_uuid + i)); |
| } |
| |
| len -= (cp_len * MIN_ADV_LENGTH + MIN_ADV_LENGTH); |
| data_mask &= ~BTM_BLE_AD_BIT_SERVICE; |
| } |
| /* 32 bits service uuid */ |
| if (len > MIN_ADV_LENGTH && data_mask & BTM_BLE_AD_BIT_SERVICE_32 && |
| p_data && p_data->p_service_32b && |
| p_data->p_service_32b->num_service != 0 && |
| p_data->p_service_32b->p_uuid) |
| { |
| if ((p_data->p_service_32b->num_service * LEN_UUID_32) > (len - MIN_ADV_LENGTH)) |
| { |
| cp_len = (len - MIN_ADV_LENGTH)/LEN_UUID_32; |
| *p ++ = 1 + cp_len * LEN_UUID_32; |
| *p++ = BTM_BLE_AD_TYPE_32SRV_PART; |
| } |
| else |
| { |
| cp_len = p_data->p_service_32b->num_service; |
| *p++ = 1 + cp_len * LEN_UUID_32; |
| *p++ = BTM_BLE_AD_TYPE_32SRV_CMPL; |
| } |
| for (i = 0; i < cp_len; i ++) |
| { |
| UINT32_TO_STREAM(p, *(p_data->p_service_32b->p_uuid + i)); |
| } |
| |
| len -= (cp_len * LEN_UUID_32 + MIN_ADV_LENGTH); |
| data_mask &= ~BTM_BLE_AD_BIT_SERVICE_32; |
| } |
| /* 128 bits services */ |
| if (len >= (MAX_UUID_SIZE + 2) && data_mask & BTM_BLE_AD_BIT_SERVICE_128 && |
| p_data && p_data->p_services_128b) |
| { |
| *p ++ = 1 + MAX_UUID_SIZE; |
| if (!p_data->p_services_128b->list_cmpl) |
| *p++ = BTM_BLE_AD_TYPE_128SRV_PART; |
| else |
| *p++ = BTM_BLE_AD_TYPE_128SRV_CMPL; |
| |
| ARRAY_TO_STREAM(p, p_data->p_services_128b->uuid128, MAX_UUID_SIZE); |
| |
| len -= (MAX_UUID_SIZE + MIN_ADV_LENGTH); |
| data_mask &= ~BTM_BLE_AD_BIT_SERVICE_128; |
| } |
| /* 32 bits Service Solicitation UUIDs */ |
| if (len > MIN_ADV_LENGTH && data_mask & BTM_BLE_AD_BIT_SERVICE_32SOL && |
| p_data && p_data->p_sol_service_32b && |
| p_data->p_sol_service_32b->num_service != 0 && |
| p_data->p_sol_service_32b->p_uuid) |
| { |
| if ((p_data->p_sol_service_32b->num_service * LEN_UUID_32) > (len - MIN_ADV_LENGTH)) |
| { |
| cp_len = (len - MIN_ADV_LENGTH)/LEN_UUID_32; |
| *p ++ = 1 + cp_len * LEN_UUID_32; |
| } |
| else |
| { |
| cp_len = p_data->p_sol_service_32b->num_service; |
| *p++ = 1 + cp_len * LEN_UUID_32; |
| } |
| |
| *p++ = BTM_BLE_AD_TYPE_32SOL_SRV_UUID; |
| for (i = 0; i < cp_len; i ++) |
| { |
| UINT32_TO_STREAM(p, *(p_data->p_sol_service_32b->p_uuid + i)); |
| } |
| |
| len -= (cp_len * LEN_UUID_32 + MIN_ADV_LENGTH); |
| data_mask &= ~BTM_BLE_AD_BIT_SERVICE_32SOL; |
| } |
| /* 128 bits Solicitation services UUID */ |
| if (len >= (MAX_UUID_SIZE + MIN_ADV_LENGTH) && data_mask & BTM_BLE_AD_BIT_SERVICE_128SOL && |
| p_data && p_data->p_sol_service_128b) |
| { |
| *p ++ = 1 + MAX_UUID_SIZE; |
| *p++ = BTM_BLE_AD_TYPE_128SOL_SRV_UUID; |
| ARRAY_TO_STREAM(p, p_data->p_sol_service_128b->uuid128, MAX_UUID_SIZE); |
| len -= (MAX_UUID_SIZE + MIN_ADV_LENGTH); |
| data_mask &= ~BTM_BLE_AD_BIT_SERVICE_128SOL; |
| } |
| /* 16bits/32bits/128bits Service Data */ |
| if (len > MIN_ADV_LENGTH && data_mask & BTM_BLE_AD_BIT_SERVICE_DATA && |
| p_data && p_data->p_service_data->len != 0 && p_data->p_service_data->p_val) |
| { |
| if (len > (p_data->p_service_data->service_uuid.len + MIN_ADV_LENGTH)) |
| { |
| if (p_data->p_service_data->len > (len - MIN_ADV_LENGTH)) |
| cp_len = len - MIN_ADV_LENGTH- p_data->p_service_data->service_uuid.len; |
| else |
| cp_len = p_data->p_service_data->len; |
| |
| *p++ = cp_len + 1 + p_data->p_service_data->service_uuid.len; |
| if (p_data->p_service_data->service_uuid.len == LEN_UUID_16) |
| { |
| *p++ = BTM_BLE_AD_TYPE_SERVICE_DATA; |
| UINT16_TO_STREAM(p, p_data->p_service_data->service_uuid.uu.uuid16); |
| } |
| else if (p_data->p_service_data->service_uuid.len == LEN_UUID_32) |
| { |
| *p++ = BTM_BLE_AD_TYPE_32SERVICE_DATA; |
| UINT32_TO_STREAM(p, p_data->p_service_data->service_uuid.uu.uuid32); |
| } |
| else |
| { |
| *p++ = BTM_BLE_AD_TYPE_128SERVICE_DATA; |
| ARRAY_TO_STREAM(p, p_data->p_service_data->service_uuid.uu.uuid128, |
| LEN_UUID_128); |
| } |
| |
| ARRAY_TO_STREAM(p, p_data->p_service_data->p_val, cp_len); |
| |
| len -= (cp_len + MIN_ADV_LENGTH + p_data->p_service_data->service_uuid.len); |
| data_mask &= ~BTM_BLE_AD_BIT_SERVICE_DATA; |
| } |
| else |
| { |
| BTM_TRACE_WARNING("service data does not fit"); |
| } |
| } |
| |
| if (len >= 6 && data_mask & BTM_BLE_AD_BIT_INT_RANGE && |
| p_data) |
| { |
| *p++ = 5; |
| *p++ = BTM_BLE_AD_TYPE_INT_RANGE; |
| UINT16_TO_STREAM(p, p_data->int_range.low); |
| UINT16_TO_STREAM(p, p_data->int_range.hi); |
| len -= 6; |
| data_mask &= ~BTM_BLE_AD_BIT_INT_RANGE; |
| } |
| if (data_mask & BTM_BLE_AD_BIT_PROPRIETARY && p_data && p_data->p_proprietary) |
| { |
| for (i = 0; i < p_data->p_proprietary->num_elem ; i ++) |
| { |
| p_elem = p_data->p_proprietary->p_elem + i; |
| |
| if (len >= (MIN_ADV_LENGTH + p_elem->len))/* len byte(1) + ATTR type(1) + Uuid len(2) |
| + value length */ |
| { |
| *p ++ = p_elem->len + 1; /* Uuid len + value length */ |
| *p ++ = p_elem->adv_type; |
| ARRAY_TO_STREAM(p, p_elem->p_val, p_elem->len); |
| |
| len -= (MIN_ADV_LENGTH + p_elem->len); |
| } |
| else |
| { |
| BTM_TRACE_WARNING("data exceed max adv packet length"); |
| break; |
| } |
| } |
| data_mask &= ~BTM_BLE_AD_BIT_PROPRIETARY; |
| } |
| } |
| |
| *p_data_mask = data_mask; |
| *p_dst = p; |
| |
| return p_flag; |
| } |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_select_adv_interval |
| ** |
| ** Description select adv interval based on device mode |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_select_adv_interval(tBTM_BLE_INQ_CB *p_cb, UINT8 evt_type, UINT16 *p_adv_int_min, UINT16 *p_adv_int_max) |
| { |
| if (p_cb->adv_interval_min && p_cb->adv_interval_max) |
| { |
| *p_adv_int_min = p_cb->adv_interval_min; |
| *p_adv_int_max = p_cb->adv_interval_max; |
| } |
| else |
| { |
| switch (evt_type) |
| { |
| case BTM_BLE_CONNECT_EVT: |
| case BTM_BLE_CONNECT_LO_DUTY_DIR_EVT: |
| *p_adv_int_min = *p_adv_int_max = BTM_BLE_GAP_ADV_FAST_INT_1; |
| break; |
| |
| case BTM_BLE_NON_CONNECT_EVT: |
| case BTM_BLE_DISCOVER_EVT: |
| *p_adv_int_min = *p_adv_int_max = BTM_BLE_GAP_ADV_FAST_INT_2; |
| break; |
| |
| /* connectable directed event */ |
| case BTM_BLE_CONNECT_DIR_EVT: |
| *p_adv_int_min = BTM_BLE_GAP_ADV_DIR_MIN_INT; |
| *p_adv_int_max = BTM_BLE_GAP_ADV_DIR_MAX_INT; |
| break; |
| |
| default: |
| *p_adv_int_min = *p_adv_int_max = BTM_BLE_GAP_ADV_SLOW_INT; |
| break; |
| } |
| } |
| return; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_update_dmt_flag_bits |
| ** |
| ** Description Obtain updated adv flag value based on connect and discoverability mode. |
| ** Also, setup DMT support value in the flag based on whether the controller |
| ** supports both LE and BR/EDR. |
| ** |
| ** Parameters: flag_value (Input / Output) - flag value |
| ** connect_mode (Input) - Connect mode value |
| ** disc_mode (Input) - discoverability mode |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_update_dmt_flag_bits(UINT8 *adv_flag_value, const UINT16 connect_mode, |
| const UINT16 disc_mode) |
| { |
| /* BR/EDR non-discoverable , non-connectable */ |
| if ((disc_mode & BTM_DISCOVERABLE_MASK) == 0 && |
| (connect_mode & BTM_CONNECTABLE_MASK) == 0) |
| *adv_flag_value |= BTM_BLE_BREDR_NOT_SPT; |
| else |
| *adv_flag_value &= ~BTM_BLE_BREDR_NOT_SPT; |
| |
| /* if local controller support, mark both controller and host support in flag */ |
| if (controller_get_interface()->supports_simultaneous_le_bredr()) |
| *adv_flag_value |= (BTM_BLE_DMT_CONTROLLER_SPT|BTM_BLE_DMT_HOST_SPT); |
| else |
| *adv_flag_value &= ~(BTM_BLE_DMT_CONTROLLER_SPT|BTM_BLE_DMT_HOST_SPT); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_set_adv_flag |
| ** |
| ** Description Set adv flag in adv data. |
| ** |
| ** Parameters: connect_mode (Input)- Connect mode value |
| ** disc_mode (Input) - discoverability mode |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_set_adv_flag(UINT16 connect_mode, UINT16 disc_mode) |
| { |
| UINT8 flag = 0, old_flag = 0; |
| tBTM_BLE_LOCAL_ADV_DATA *p_adv_data = &btm_cb.ble_ctr_cb.inq_var.adv_data; |
| |
| if (p_adv_data->p_flags != NULL) |
| flag = old_flag = *(p_adv_data->p_flags); |
| |
| btm_ble_update_dmt_flag_bits (&flag, connect_mode, disc_mode); |
| |
| LOG_DEBUG(LOG_TAG, "disc_mode %04x", disc_mode); |
| /* update discoverable flag */ |
| if (disc_mode & BTM_BLE_LIMITED_DISCOVERABLE) |
| { |
| flag &= ~BTM_BLE_GEN_DISC_FLAG; |
| flag |= BTM_BLE_LIMIT_DISC_FLAG; |
| } |
| else if (disc_mode & BTM_BLE_GENERAL_DISCOVERABLE) |
| { |
| flag |= BTM_BLE_GEN_DISC_FLAG; |
| flag &= ~BTM_BLE_LIMIT_DISC_FLAG; |
| } |
| else /* remove all discoverable flags */ |
| { |
| flag &= ~(BTM_BLE_LIMIT_DISC_FLAG|BTM_BLE_GEN_DISC_FLAG); |
| } |
| |
| if (flag != old_flag) |
| { |
| btm_ble_update_adv_flag(flag); |
| } |
| } |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_set_discoverability |
| ** |
| ** Description This function is called to set BLE discoverable mode. |
| ** |
| ** Parameters: combined_mode: discoverability mode. |
| ** |
| ** Returns BTM_SUCCESS is status set successfully; otherwise failure. |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_ble_set_discoverability(UINT16 combined_mode) |
| { |
| tBTM_LE_RANDOM_CB *p_addr_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb; |
| tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var; |
| UINT16 mode = (combined_mode & BTM_BLE_DISCOVERABLE_MASK); |
| UINT8 new_mode = BTM_BLE_ADV_ENABLE; |
| UINT8 evt_type; |
| tBTM_STATUS status = BTM_SUCCESS; |
| BD_ADDR p_addr_ptr= {0}; |
| tBLE_ADDR_TYPE init_addr_type = BLE_ADDR_PUBLIC, |
| own_addr_type = p_addr_cb->own_addr_type; |
| UINT16 adv_int_min, adv_int_max; |
| |
| BTM_TRACE_EVENT ("%s mode=0x%0x combined_mode=0x%x", __FUNCTION__, mode, combined_mode); |
| |
| /*** Check mode parameter ***/ |
| if (mode > BTM_BLE_MAX_DISCOVERABLE) |
| return(BTM_ILLEGAL_VALUE); |
| |
| p_cb->discoverable_mode = mode; |
| |
| evt_type = btm_set_conn_mode_adv_init_addr(p_cb, p_addr_ptr, &init_addr_type, &own_addr_type); |
| |
| if (p_cb->connectable_mode == BTM_BLE_NON_CONNECTABLE && mode == BTM_BLE_NON_DISCOVERABLE) |
| new_mode = BTM_BLE_ADV_DISABLE; |
| |
| btm_ble_select_adv_interval(p_cb, evt_type, &adv_int_min, &adv_int_max); |
| |
| btu_stop_timer(&p_cb->fast_adv_timer); |
| |
| /* update adv params if start advertising */ |
| BTM_TRACE_EVENT ("evt_type=0x%x p-cb->evt_type=0x%x ", evt_type, p_cb->evt_type); |
| |
| if (new_mode == BTM_BLE_ADV_ENABLE) |
| { |
| btm_ble_set_adv_flag (btm_cb.btm_inq_vars.connectable_mode, combined_mode); |
| |
| if (evt_type != p_cb->evt_type ||p_cb->adv_addr_type != own_addr_type |
| || !p_cb->fast_adv_on) |
| { |
| btm_ble_stop_adv(); |
| |
| /* update adv params */ |
| if (!btsnd_hcic_ble_write_adv_params (adv_int_min, |
| adv_int_max, |
| evt_type, |
| own_addr_type, |
| init_addr_type, |
| p_addr_ptr, |
| p_cb->adv_chnl_map, |
| p_cb->afp)) |
| { |
| status = BTM_NO_RESOURCES; |
| } |
| else |
| { |
| p_cb->evt_type = evt_type; |
| p_cb->adv_addr_type = own_addr_type; |
| } |
| } |
| } |
| |
| if (status == BTM_SUCCESS && p_cb->adv_mode != new_mode) |
| { |
| if (new_mode == BTM_BLE_ADV_ENABLE) |
| status = btm_ble_start_adv(); |
| else |
| status = btm_ble_stop_adv(); |
| } |
| |
| if (p_cb->adv_mode == BTM_BLE_ADV_ENABLE) |
| { |
| p_cb->fast_adv_on = TRUE; |
| /* start initial GAP mode adv timer */ |
| btu_start_timer (&p_cb->fast_adv_timer, BTU_TTYPE_BLE_GAP_FAST_ADV, |
| BTM_BLE_GAP_FAST_ADV_TOUT); |
| } |
| else |
| { |
| #if BLE_PRIVACY_SPT == TRUE |
| btm_ble_disable_resolving_list(BTM_BLE_RL_ADV, TRUE); |
| #endif |
| } |
| |
| /* set up stop advertising timer */ |
| if (status == BTM_SUCCESS && mode == BTM_BLE_LIMITED_DISCOVERABLE) |
| { |
| BTM_TRACE_EVENT ("start timer for limited disc mode duration=%d (180 secs)", BTM_BLE_GAP_LIM_TOUT); |
| /* start Tgap(lim_timeout) */ |
| btu_start_timer (&p_cb->inq_timer_ent, BTU_TTYPE_BLE_GAP_LIM_DISC, |
| BTM_BLE_GAP_LIM_TOUT); |
| } |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_set_connectability |
| ** |
| ** Description This function is called to set BLE connectability mode. |
| ** |
| ** Parameters: combined_mode: connectability mode. |
| ** |
| ** Returns BTM_SUCCESS is status set successfully; otherwise failure. |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_ble_set_connectability(UINT16 combined_mode) |
| { |
| tBTM_LE_RANDOM_CB *p_addr_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb; |
| tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var; |
| UINT16 mode = (combined_mode & BTM_BLE_CONNECTABLE_MASK); |
| UINT8 new_mode = BTM_BLE_ADV_ENABLE; |
| UINT8 evt_type; |
| tBTM_STATUS status = BTM_SUCCESS; |
| BD_ADDR p_addr_ptr = {0}; |
| tBLE_ADDR_TYPE peer_addr_type = BLE_ADDR_PUBLIC, |
| own_addr_type = p_addr_cb->own_addr_type; |
| UINT16 adv_int_min, adv_int_max; |
| |
| BTM_TRACE_EVENT ("%s mode=0x%0x combined_mode=0x%x", __FUNCTION__, mode, combined_mode); |
| |
| /*** Check mode parameter ***/ |
| if (mode > BTM_BLE_MAX_CONNECTABLE) |
| return(BTM_ILLEGAL_VALUE); |
| |
| p_cb->connectable_mode = mode; |
| |
| evt_type = btm_set_conn_mode_adv_init_addr(p_cb, p_addr_ptr, &peer_addr_type, &own_addr_type); |
| |
| if (mode == BTM_BLE_NON_CONNECTABLE && p_cb->discoverable_mode == BTM_BLE_NON_DISCOVERABLE) |
| new_mode = BTM_BLE_ADV_DISABLE; |
| |
| btm_ble_select_adv_interval(p_cb, evt_type, &adv_int_min, &adv_int_max); |
| |
| btu_stop_timer(&p_cb->fast_adv_timer); |
| /* update adv params if needed */ |
| if (new_mode == BTM_BLE_ADV_ENABLE) |
| { |
| btm_ble_set_adv_flag (combined_mode, btm_cb.btm_inq_vars.discoverable_mode); |
| if (p_cb->evt_type != evt_type || p_cb->adv_addr_type != p_addr_cb->own_addr_type |
| || !p_cb->fast_adv_on) |
| { |
| btm_ble_stop_adv(); |
| |
| if (!btsnd_hcic_ble_write_adv_params (adv_int_min, |
| adv_int_max, |
| evt_type, |
| own_addr_type, |
| peer_addr_type, |
| p_addr_ptr, |
| p_cb->adv_chnl_map, |
| p_cb->afp)) |
| { |
| status = BTM_NO_RESOURCES; |
| } |
| else |
| { |
| p_cb->evt_type = evt_type; |
| p_cb->adv_addr_type = own_addr_type; |
| } |
| } |
| } |
| |
| /* update advertising mode */ |
| if (status == BTM_SUCCESS && new_mode != p_cb->adv_mode) |
| { |
| if (new_mode == BTM_BLE_ADV_ENABLE) |
| status = btm_ble_start_adv(); |
| else |
| status = btm_ble_stop_adv(); |
| } |
| |
| if (p_cb->adv_mode == BTM_BLE_ADV_ENABLE) |
| { |
| p_cb->fast_adv_on = TRUE; |
| /* start initial GAP mode adv timer */ |
| btu_start_timer (&p_cb->fast_adv_timer, BTU_TTYPE_BLE_GAP_FAST_ADV, |
| BTM_BLE_GAP_FAST_ADV_TOUT); |
| } |
| else |
| { |
| #if BLE_PRIVACY_SPT == TRUE |
| btm_ble_disable_resolving_list(BTM_BLE_RL_ADV, TRUE); |
| #endif |
| } |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_start_inquiry |
| ** |
| ** Description This function is called to start BLE inquiry procedure. |
| ** If the duration is zero, the periodic inquiry mode is cancelled. |
| ** |
| ** Parameters: mode - GENERAL or LIMITED inquiry |
| ** p_inq_params - pointer to the BLE inquiry parameter. |
| ** p_results_cb - callback returning pointer to results (tBTM_INQ_RESULTS) |
| ** p_cmpl_cb - callback indicating the end of an inquiry |
| ** |
| ** |
| ** |
| ** Returns BTM_CMD_STARTED if successfully started |
| ** BTM_NO_RESOURCES if could not allocate a message buffer |
| ** BTM_BUSY - if an inquiry is already active |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_ble_start_inquiry (UINT8 mode, UINT8 duration) |
| { |
| tBTM_STATUS status = BTM_CMD_STARTED; |
| tBTM_BLE_CB *p_ble_cb = &btm_cb.ble_ctr_cb; |
| tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars; |
| |
| BTM_TRACE_DEBUG("btm_ble_start_inquiry: mode = %02x inq_active = 0x%02x", mode, btm_cb.btm_inq_vars.inq_active); |
| |
| /* if selective connection is active, or inquiry is already active, reject it */ |
| if (BTM_BLE_IS_INQ_ACTIVE(p_ble_cb->scan_activity) || |
| BTM_BLE_IS_SEL_CONN_ACTIVE (p_ble_cb->scan_activity)) |
| { |
| BTM_TRACE_ERROR("LE Inquiry is active, can not start inquiry"); |
| return(BTM_BUSY); |
| } |
| |
| if (!BTM_BLE_IS_SCAN_ACTIVE(p_ble_cb->scan_activity)) |
| { |
| btm_update_scanner_filter_policy(SP_ADV_ALL); |
| |
| #if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE) |
| /* enable IRK list */ |
| btm_ble_enable_resolving_list_for_platform(BTM_BLE_RL_SCAN); |
| #endif |
| p_ble_cb->inq_var.scan_duplicate_filter = BTM_BLE_DUPLICATE_DISABLE; |
| status = btm_ble_start_scan(); |
| } |
| |
| if (status == BTM_CMD_STARTED) |
| { |
| p_inq->inq_active |= mode; |
| p_ble_cb->scan_activity |= mode; |
| |
| BTM_TRACE_DEBUG("btm_ble_start_inquiry inq_active = 0x%02x", p_inq->inq_active); |
| |
| if (duration != 0) |
| { |
| /* start inquiry timer */ |
| btu_start_timer (&p_inq->inq_timer_ent, BTU_TTYPE_BLE_INQUIRY, duration); |
| } |
| } |
| |
| return status; |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_read_remote_name_cmpl |
| ** |
| ** Description This function is called when BLE remote name is received. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_read_remote_name_cmpl(BOOLEAN status, BD_ADDR bda, UINT16 length, char *p_name) |
| { |
| UINT8 hci_status = HCI_SUCCESS; |
| BD_NAME bd_name; |
| |
| memset(bd_name, 0, (BD_NAME_LEN + 1)); |
| if (length > BD_NAME_LEN) |
| { |
| length = BD_NAME_LEN; |
| } |
| memcpy((UINT8*)bd_name, p_name, length); |
| |
| if ((!status) || (length==0)) |
| { |
| hci_status = HCI_ERR_HOST_TIMEOUT; |
| } |
| |
| btm_process_remote_name(bda, bd_name, length +1, hci_status); |
| btm_sec_rmt_name_request_complete (bda, (UINT8 *)p_name, hci_status); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_read_remote_name |
| ** |
| ** Description This function read remote LE device name using GATT read |
| ** procedure. |
| ** |
| ** Parameters: None. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_ble_read_remote_name(BD_ADDR remote_bda, tBTM_INQ_INFO *p_cur, tBTM_CMPL_CB *p_cb) |
| { |
| tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars; |
| |
| if (!controller_get_interface()->supports_ble()) |
| return BTM_ERR_PROCESSING; |
| |
| if (p_cur && |
| p_cur->results.ble_evt_type != BTM_BLE_EVT_CONN_ADV && |
| p_cur->results.ble_evt_type != BTM_BLE_EVT_CONN_DIR_ADV) |
| { |
| BTM_TRACE_DEBUG("name request to non-connectable device failed."); |
| return BTM_ERR_PROCESSING; |
| } |
| |
| /* read remote device name using GATT procedure */ |
| if (p_inq->remname_active) |
| return BTM_BUSY; |
| |
| if (!GAP_BleReadPeerDevName(remote_bda, btm_ble_read_remote_name_cmpl)) |
| return BTM_BUSY; |
| |
| p_inq->p_remname_cmpl_cb = p_cb; |
| p_inq->remname_active = TRUE; |
| |
| memcpy(p_inq->remname_bda, remote_bda, BD_ADDR_LEN); |
| |
| btu_start_timer (&p_inq->rmt_name_timer_ent, |
| BTU_TTYPE_BTM_RMT_NAME, |
| BTM_EXT_BLE_RMT_NAME_TIMEOUT); |
| |
| return BTM_CMD_STARTED; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_cancel_remote_name |
| ** |
| ** Description This function cancel read remote LE device name. |
| ** |
| ** Parameters: None. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BOOLEAN btm_ble_cancel_remote_name(BD_ADDR remote_bda) |
| { |
| tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars; |
| BOOLEAN status; |
| |
| status = GAP_BleCancelReadPeerDevName(remote_bda); |
| |
| p_inq->remname_active = FALSE; |
| memset(p_inq->remname_bda, 0, BD_ADDR_LEN); |
| btu_stop_timer(&p_inq->rmt_name_timer_ent); |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_update_adv_flag |
| ** |
| ** Description This function update the limited discoverable flag in the adv |
| ** data. |
| ** |
| ** Parameters: None. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void btm_ble_update_adv_flag(UINT8 flag) |
| { |
| tBTM_BLE_LOCAL_ADV_DATA *p_adv_data = &btm_cb.ble_ctr_cb.inq_var.adv_data; |
| UINT8 *p; |
| |
| BTM_TRACE_DEBUG ("btm_ble_update_adv_flag new=0x%x", flag); |
| |
| if (p_adv_data->p_flags != NULL) |
| { |
| BTM_TRACE_DEBUG ("btm_ble_update_adv_flag old=0x%x", *p_adv_data->p_flags); |
| *p_adv_data->p_flags = flag; |
| } |
| else /* no FLAGS in ADV data*/ |
| { |
| p = (p_adv_data->p_pad == NULL) ? p_adv_data->ad_data : p_adv_data->p_pad; |
| /* need 3 bytes space to stuff in the flags, if not */ |
| /* erase all written data, just for flags */ |
| if ((BTM_BLE_AD_DATA_LEN - (p - p_adv_data->ad_data)) < 3) |
| { |
| p = p_adv_data->p_pad = p_adv_data->ad_data; |
| memset(p_adv_data->ad_data, 0, BTM_BLE_AD_DATA_LEN); |
| } |
| |
| *p++ = 2; |
| *p++ = BTM_BLE_AD_TYPE_FLAG; |
| p_adv_data->p_flags = p; |
| *p++ = flag; |
| p_adv_data->p_pad = p; |
| } |
| |
| if (btsnd_hcic_ble_set_adv_data((UINT8)(p_adv_data->p_pad - p_adv_data->ad_data), |
| p_adv_data->ad_data)) |
| p_adv_data->data_mask |= BTM_BLE_AD_BIT_FLAGS; |
| |
| } |
| |
| #if 0 |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_parse_adv_data |
| ** |
| ** Description This function parse the adv data into a structure. |
| ** |
| ** Returns pointer to entry, or NULL if not found |
| ** |
| *******************************************************************************/ |
| static void btm_ble_parse_adv_data(tBTM_INQ_INFO *p_info, UINT8 *p_data, |
| UINT8 len, tBTM_BLE_INQ_DATA *p_adv_data, UINT8 *p_buf) |
| { |
| UINT8 *p_cur = p_data; |
| UINT8 ad_len, ad_type, ad_flag; |
| |
| BTM_TRACE_EVENT (" btm_ble_parse_adv_data"); |
| |
| while (len > 0) |
| { |
| BTM_TRACE_DEBUG("btm_ble_parse_adv_data: len = %d", len); |
| if ((ad_len = *p_cur ++) == 0) |
| break; |
| |
| ad_type = *p_cur ++; |
| |
| BTM_TRACE_DEBUG(" ad_type = %02x ad_len = %d", ad_type, ad_len); |
| |
| switch (ad_type) |
| { |
| case BTM_BLE_AD_TYPE_NAME_SHORT: |
| |
| case BTM_BLE_AD_TYPE_NAME_CMPL: |
| p_adv_data->ad_mask |= BTM_BLE_AD_BIT_DEV_NAME; |
| if (p_info) |
| { |
| p_info->remote_name_type =(ad_type == BTM_BLE_AD_TYPE_NAME_SHORT) ? |
| BTM_BLE_NAME_SHORT: BTM_BLE_NAME_CMPL; |
| memcpy(p_info->remote_name, p_cur, ad_len -1); |
| p_info->remote_name[ad_len] = 0; |
| p_adv_data->p_remote_name = p_info->remote_name; |
| p_info->remote_name_len = p_adv_data->remote_name_len = ad_len - 1; |
| BTM_TRACE_DEBUG("BTM_BLE_AD_TYPE_NAME name = %s",p_adv_data->p_remote_name); |
| } |
| p_cur += (ad_len -1); |
| |
| break; |
| |
| case BTM_BLE_AD_TYPE_FLAG: |
| p_adv_data->ad_mask |= BTM_BLE_AD_BIT_FLAGS; |
| ad_flag = *p_cur ++; |
| p_adv_data->flag = (UINT8)(ad_flag & BTM_BLE_ADV_FLAG_MASK) ; |
| BTM_TRACE_DEBUG("BTM_BLE_AD_TYPE_FLAG flag = %s | %s | %s", |
| (p_adv_data->flag & BTM_BLE_LIMIT_DISC_FLAG)? "LE_LIMIT_DISC" : "", |
| (p_adv_data->flag & BTM_BLE_GEN_DISC_FLAG)? "LE_GENERAL_DISC" : "", |
| (p_adv_data->flag & BTM_BLE_BREDR_NOT_SPT)? "LE Only device" : ""); |
| break; |
| |
| case BTM_BLE_AD_TYPE_TX_PWR: |
| p_adv_data->ad_mask |= BTM_BLE_AD_BIT_TX_PWR; |
| p_adv_data->tx_power_level = (INT8)*p_cur ++; |
| BTM_TRACE_DEBUG("BTM_BLE_AD_TYPE_TX_PWR tx_level = %d", p_adv_data->tx_power_level); |
| break; |
| |
| case BTM_BLE_AD_TYPE_MANU: |
| |
| case BTM_BLE_AD_TYPE_16SRV_PART: |
| case BTM_BLE_AD_TYPE_16SRV_CMPL: |
| p_adv_data->ad_mask |= BTM_BLE_AD_BIT_SERVICE; |
| /* need allocate memory to store UUID list */ |
| p_adv_data->service.num_service = (ad_len - 1)/2; |
| BTM_TRACE_DEBUG("service UUID list, num = %d", p_adv_data->service.num_service); |
| p_cur += (ad_len - 1); |
| break; |
| |
| case BTM_BLE_AD_TYPE_SOL_SRV_UUID: |
| p_adv_data->ad_mask |= BTM_BLE_AD_BIT_SERVICE_SOL; |
| /* need allocate memory to store UUID list */ |
| p_adv_data->service.num_service = (ad_len - 1)/2; |
| BTM_TRACE_DEBUG("service UUID list, num = %d", p_adv_data->service.num_service); |
| p_cur += (ad_len - 1); |
| break; |
| |
| case BTM_BLE_AD_TYPE_128SOL_SRV_UUID: |
| p_adv_data->ad_mask |= BTM_BLE_AD_BIT_SERVICE_128SOL; |
| /* need allocate memory to store UUID list */ |
| p_adv_data->service.num_service = (ad_len - 1)/16; |
| BTM_TRACE_DEBUG("service UUID list, num = %d", p_adv_data->service.num_service); |
| p_cur += (ad_len - 1); |
| break; |
| |
| case BTM_BLE_AD_TYPE_APPEARANCE: |
| case BTM_BLE_AD_TYPE_PUBLIC_TARGET: |
| case BTM_BLE_AD_TYPE_RANDOM_TARGET: |
| default: |
| break; |
| } |
| len -= (ad_len + 1); |
| } |
| } |
| #endif |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_cache_adv_data |
| ** |
| ** Description Update advertising cache data. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_cache_adv_data(tBTM_INQ_RESULTS *p_cur, UINT8 data_len, UINT8 *p, UINT8 evt_type) |
| { |
| tBTM_BLE_INQ_CB *p_le_inq_cb = &btm_cb.ble_ctr_cb.inq_var; |
| UINT8 *p_cache; |
| UINT8 length; |
| UNUSED(p_cur); |
| |
| /* cache adv report/scan response data */ |
| if (evt_type != BTM_BLE_SCAN_RSP_EVT) |
| { |
| p_le_inq_cb->adv_len = 0; |
| memset(p_le_inq_cb->adv_data_cache, 0, BTM_BLE_CACHE_ADV_DATA_MAX); |
| } |
| |
| if (data_len > 0) |
| { |
| p_cache = &p_le_inq_cb->adv_data_cache[p_le_inq_cb->adv_len]; |
| STREAM_TO_UINT8(length, p); |
| while ( length && ((p_le_inq_cb->adv_len + length + 1) <= BTM_BLE_CACHE_ADV_DATA_MAX)) |
| { |
| /* copy from the length byte & data into cache */ |
| memcpy(p_cache, p-1, length+1); |
| /* advance the cache pointer past data */ |
| p_cache += length+1; |
| /* increment cache length */ |
| p_le_inq_cb->adv_len += length+1; |
| /* skip the length of data */ |
| p += length; |
| STREAM_TO_UINT8(length, p); |
| } |
| } |
| |
| /* parse service UUID from adv packet and save it in inq db eir_uuid */ |
| /* TODO */ |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_is_discoverable |
| ** |
| ** Description check ADV flag to make sure device is discoverable and match |
| ** the search condition |
| ** |
| ** Parameters |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| UINT8 btm_ble_is_discoverable(BD_ADDR bda, UINT8 evt_type, UINT8 *p) |
| { |
| UINT8 *p_flag, flag = 0, rt = 0; |
| UINT8 data_len; |
| tBTM_INQ_PARMS *p_cond = &btm_cb.btm_inq_vars.inqparms; |
| tBTM_BLE_INQ_CB *p_le_inq_cb = &btm_cb.ble_ctr_cb.inq_var; |
| |
| UNUSED(p); |
| |
| /* for observer, always "discoverable */ |
| if (BTM_BLE_IS_OBS_ACTIVE(btm_cb.ble_ctr_cb.scan_activity)) |
| rt |= BTM_BLE_OBS_RESULT; |
| |
| if (BTM_BLE_IS_SEL_CONN_ACTIVE(btm_cb.ble_ctr_cb.scan_activity) && |
| (evt_type == BTM_BLE_CONNECT_EVT || evt_type == BTM_BLE_CONNECT_DIR_EVT)) |
| rt |= BTM_BLE_SEL_CONN_RESULT; |
| |
| /* does not match filter condition */ |
| if (p_cond->filter_cond_type == BTM_FILTER_COND_BD_ADDR && |
| memcmp(bda, p_cond->filter_cond.bdaddr_cond, BD_ADDR_LEN) != 0) |
| { |
| BTM_TRACE_DEBUG("BD ADDR does not meet filter condition"); |
| return rt; |
| } |
| |
| if (p_le_inq_cb->adv_len != 0) |
| { |
| if ((p_flag = BTM_CheckAdvData(p_le_inq_cb->adv_data_cache, |
| BTM_BLE_AD_TYPE_FLAG, &data_len)) != NULL) |
| { |
| flag = * p_flag; |
| |
| if ((btm_cb.btm_inq_vars.inq_active & BTM_BLE_GENERAL_INQUIRY) && |
| (flag & (BTM_BLE_LIMIT_DISC_FLAG|BTM_BLE_GEN_DISC_FLAG)) != 0) |
| { |
| BTM_TRACE_DEBUG("Find Generable Discoverable device"); |
| rt |= BTM_BLE_INQ_RESULT; |
| } |
| |
| else if (btm_cb.btm_inq_vars.inq_active & BTM_BLE_LIMITED_INQUIRY && |
| (flag & BTM_BLE_LIMIT_DISC_FLAG) != 0) |
| { |
| BTM_TRACE_DEBUG("Find limited discoverable device"); |
| rt |= BTM_BLE_INQ_RESULT; |
| } |
| } |
| } |
| return rt; |
| } |
| |
| static void btm_ble_appearance_to_cod(UINT16 appearance, UINT8 *dev_class) |
| { |
| dev_class[0] = 0; |
| |
| switch (appearance) |
| { |
| case BTM_BLE_APPEARANCE_GENERIC_PHONE: |
| dev_class[1] = BTM_COD_MAJOR_PHONE; |
| dev_class[2] = BTM_COD_MINOR_UNCLASSIFIED; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_COMPUTER: |
| dev_class[1] = BTM_COD_MAJOR_COMPUTER; |
| dev_class[2] = BTM_COD_MINOR_UNCLASSIFIED; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_REMOTE: |
| dev_class[1] = BTM_COD_MAJOR_PERIPHERAL; |
| dev_class[2] = BTM_COD_MINOR_REMOTE_CONTROL; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_THERMOMETER: |
| case BTM_BLE_APPEARANCE_THERMOMETER_EAR: |
| dev_class[1] = BTM_COD_MAJOR_HEALTH; |
| dev_class[2] = BTM_COD_MINOR_THERMOMETER; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_HEART_RATE: |
| case BTM_BLE_APPEARANCE_HEART_RATE_BELT: |
| dev_class[1] = BTM_COD_MAJOR_HEALTH; |
| dev_class[2] = BTM_COD_MINOR_HEART_PULSE_MONITOR; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_BLOOD_PRESSURE: |
| case BTM_BLE_APPEARANCE_BLOOD_PRESSURE_ARM: |
| case BTM_BLE_APPEARANCE_BLOOD_PRESSURE_WRIST: |
| dev_class[1] = BTM_COD_MAJOR_HEALTH; |
| dev_class[2] = BTM_COD_MINOR_BLOOD_MONITOR; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_PULSE_OXIMETER: |
| case BTM_BLE_APPEARANCE_PULSE_OXIMETER_FINGERTIP: |
| case BTM_BLE_APPEARANCE_PULSE_OXIMETER_WRIST: |
| dev_class[1] = BTM_COD_MAJOR_HEALTH; |
| dev_class[2] = BTM_COD_MINOR_PULSE_OXIMETER; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_GLUCOSE: |
| dev_class[1] = BTM_COD_MAJOR_HEALTH; |
| dev_class[2] = BTM_COD_MINOR_GLUCOSE_METER; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_WEIGHT: |
| dev_class[1] = BTM_COD_MAJOR_HEALTH; |
| dev_class[2] = BTM_COD_MINOR_WEIGHING_SCALE; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_WALKING: |
| case BTM_BLE_APPEARANCE_WALKING_IN_SHOE: |
| case BTM_BLE_APPEARANCE_WALKING_ON_SHOE: |
| case BTM_BLE_APPEARANCE_WALKING_ON_HIP: |
| dev_class[1] = BTM_COD_MAJOR_HEALTH; |
| dev_class[2] = BTM_COD_MINOR_STEP_COUNTER; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_WATCH: |
| case BTM_BLE_APPEARANCE_SPORTS_WATCH: |
| dev_class[1] = BTM_COD_MAJOR_WEARABLE; |
| dev_class[2] = BTM_COD_MINOR_WRIST_WATCH; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_EYEGLASSES: |
| dev_class[1] = BTM_COD_MAJOR_WEARABLE; |
| dev_class[2] = BTM_COD_MINOR_GLASSES; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_DISPLAY: |
| dev_class[1] = BTM_COD_MAJOR_IMAGING; |
| dev_class[2] = BTM_COD_MINOR_DISPLAY; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_MEDIA_PLAYER: |
| dev_class[1] = BTM_COD_MAJOR_AUDIO; |
| dev_class[2] = BTM_COD_MINOR_UNCLASSIFIED; |
| break; |
| case BTM_BLE_APPEARANCE_GENERIC_BARCODE_SCANNER: |
| case BTM_BLE_APPEARANCE_HID_BARCODE_SCANNER: |
| case BTM_BLE_APPEARANCE_GENERIC_HID: |
| dev_class[1] = BTM_COD_MAJOR_PERIPHERAL; |
| dev_class[2] = BTM_COD_MINOR_UNCLASSIFIED; |
| break; |
| case BTM_BLE_APPEARANCE_HID_KEYBOARD: |
| dev_class[1] = BTM_COD_MAJOR_PERIPHERAL; |
| dev_class[2] = BTM_COD_MINOR_KEYBOARD; |
| break; |
| case BTM_BLE_APPEARANCE_HID_MOUSE: |
| dev_class[1] = BTM_COD_MAJOR_PERIPHERAL; |
| dev_class[2] = BTM_COD_MINOR_POINTING; |
| break; |
| case BTM_BLE_APPEARANCE_HID_JOYSTICK: |
| dev_class[1] = BTM_COD_MAJOR_PERIPHERAL; |
| dev_class[2] = BTM_COD_MINOR_JOYSTICK; |
| break; |
| case BTM_BLE_APPEARANCE_HID_GAMEPAD: |
| dev_class[1] = BTM_COD_MAJOR_PERIPHERAL; |
| dev_class[2] = BTM_COD_MINOR_GAMEPAD; |
| break; |
| case BTM_BLE_APPEARANCE_HID_DIGITIZER_TABLET: |
| dev_class[1] = BTM_COD_MAJOR_PERIPHERAL; |
| dev_class[2] = BTM_COD_MINOR_DIGITIZING_TABLET; |
| break; |
| case BTM_BLE_APPEARANCE_HID_CARD_READER: |
| dev_class[1] = BTM_COD_MAJOR_PERIPHERAL; |
| dev_class[2] = BTM_COD_MINOR_CARD_READER; |
| break; |
| case BTM_BLE_APPEARANCE_HID_DIGITAL_PEN: |
| dev_class[1] = BTM_COD_MAJOR_PERIPHERAL; |
| dev_class[2] = BTM_COD_MINOR_DIGITAL_PAN; |
| break; |
| case BTM_BLE_APPEARANCE_UKNOWN: |
| case BTM_BLE_APPEARANCE_GENERIC_CLOCK: |
| case BTM_BLE_APPEARANCE_GENERIC_TAG: |
| case BTM_BLE_APPEARANCE_GENERIC_KEYRING: |
| case BTM_BLE_APPEARANCE_GENERIC_CYCLING: |
| case BTM_BLE_APPEARANCE_CYCLING_COMPUTER: |
| case BTM_BLE_APPEARANCE_CYCLING_SPEED: |
| case BTM_BLE_APPEARANCE_CYCLING_CADENCE: |
| case BTM_BLE_APPEARANCE_CYCLING_POWER: |
| case BTM_BLE_APPEARANCE_CYCLING_SPEED_CADENCE: |
| case BTM_BLE_APPEARANCE_GENERIC_OUTDOOR_SPORTS: |
| case BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION: |
| case BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_AND_NAV: |
| case BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_POD: |
| case BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_POD_AND_NAV: |
| default: |
| dev_class[1] = BTM_COD_MAJOR_UNCLASSIFIED; |
| dev_class[2] = BTM_COD_MINOR_UNCLASSIFIED; |
| }; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_update_inq_result |
| ** |
| ** Description Update adv packet information into inquiry result. |
| ** |
| ** Parameters |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BOOLEAN btm_ble_update_inq_result(tINQ_DB_ENT *p_i, UINT8 addr_type, UINT8 evt_type, UINT8 *p) |
| { |
| BOOLEAN to_report = TRUE; |
| tBTM_INQ_RESULTS *p_cur = &p_i->inq_info.results; |
| UINT8 len; |
| UINT8 *p_flag; |
| tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars; |
| UINT8 data_len, rssi; |
| tBTM_BLE_INQ_CB *p_le_inq_cb = &btm_cb.ble_ctr_cb.inq_var; |
| UINT8 *p1; |
| UINT8 *p_uuid16; |
| |
| STREAM_TO_UINT8 (data_len, p); |
| |
| if (data_len > BTM_BLE_ADV_DATA_LEN_MAX) |
| { |
| BTM_TRACE_WARNING("EIR data too long %d. discard", data_len); |
| return FALSE; |
| } |
| btm_ble_cache_adv_data(p_cur, data_len, p, evt_type); |
| |
| p1 = (p + data_len); |
| STREAM_TO_UINT8 (rssi, p1); |
| |
| /* Save the info */ |
| p_cur->inq_result_type = BTM_INQ_RESULT_BLE; |
| p_cur->ble_addr_type = addr_type; |
| p_cur->rssi = rssi; |
| |
| /* active scan, always wait until get scan_rsp to report the result */ |
| if ((btm_cb.ble_ctr_cb.inq_var.scan_type == BTM_BLE_SCAN_MODE_ACTI && |
| (evt_type == BTM_BLE_CONNECT_EVT || evt_type == BTM_BLE_DISCOVER_EVT))) |
| { |
| BTM_TRACE_DEBUG("btm_ble_update_inq_result scan_rsp=false, to_report=false,\ |
| scan_type_active=%d", btm_cb.ble_ctr_cb.inq_var.scan_type); |
| p_i->scan_rsp = FALSE; |
| to_report = FALSE; |
| } |
| else |
| p_i->scan_rsp = TRUE; |
| |
| if (p_i->inq_count != p_inq->inq_counter) |
| p_cur->device_type = BT_DEVICE_TYPE_BLE; |
| else |
| p_cur->device_type |= BT_DEVICE_TYPE_BLE; |
| |
| if (evt_type != BTM_BLE_SCAN_RSP_EVT) |
| p_cur->ble_evt_type = evt_type; |
| |
| p_i->inq_count = p_inq->inq_counter; /* Mark entry for current inquiry */ |
| |
| if (p_le_inq_cb->adv_len != 0) |
| { |
| if ((p_flag = BTM_CheckAdvData(p_le_inq_cb->adv_data_cache, BTM_BLE_AD_TYPE_FLAG, &len)) != NULL) |
| p_cur->flag = * p_flag; |
| } |
| |
| if (p_le_inq_cb->adv_len != 0) |
| { |
| /* Check to see the BLE device has the Appearance UUID in the advertising data. If it does |
| * then try to convert the appearance value to a class of device value Bluedroid can use. |
| * Otherwise fall back to trying to infer if it is a HID device based on the service class. |
| */ |
| p_uuid16 = BTM_CheckAdvData(p_le_inq_cb->adv_data_cache, BTM_BLE_AD_TYPE_APPEARANCE, &len); |
| if (p_uuid16 && len == 2) |
| { |
| btm_ble_appearance_to_cod((UINT16)p_uuid16[0] | (p_uuid16[1] << 8), p_cur->dev_class); |
| } |
| else |
| { |
| if ((p_uuid16 = BTM_CheckAdvData(p_le_inq_cb->adv_data_cache, |
| BTM_BLE_AD_TYPE_16SRV_CMPL, &len)) != NULL) |
| { |
| UINT8 i; |
| for (i = 0; i + 2 <= len; i = i + 2) |
| { |
| /* if this BLE device support HID over LE, set HID Major in class of device */ |
| if ((p_uuid16[i] | (p_uuid16[i+1] << 8)) == UUID_SERVCLASS_LE_HID) |
| { |
| p_cur->dev_class[0] = 0; |
| p_cur->dev_class[1] = BTM_COD_MAJOR_PERIPHERAL; |
| p_cur->dev_class[2] = 0; |
| break; |
| } |
| } |
| } |
| } |
| } |
| |
| /* if BR/EDR not supported is not set, assume is a DUMO device */ |
| if ((p_cur->flag & BTM_BLE_BREDR_NOT_SPT) == 0 && |
| evt_type != BTM_BLE_CONNECT_DIR_EVT) |
| { |
| if (p_cur->ble_addr_type != BLE_ADDR_RANDOM) |
| { |
| BTM_TRACE_DEBUG("BR/EDR NOT support bit not set, treat as DUMO"); |
| p_cur->device_type |= BT_DEVICE_TYPE_DUMO; |
| } else { |
| BTM_TRACE_DEBUG("Random address, treating device as LE only"); |
| } |
| } |
| else |
| { |
| BTM_TRACE_DEBUG("BR/EDR NOT SUPPORT bit set, LE only device"); |
| } |
| |
| return to_report; |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_clear_all_pending_le_entry |
| ** |
| ** Description This function is called to clear all LE pending entry in |
| ** inquiry database. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_clear_all_pending_le_entry(void) |
| { |
| UINT16 xx; |
| tINQ_DB_ENT *p_ent = btm_cb.btm_inq_vars.inq_db; |
| |
| for (xx = 0; xx < BTM_INQ_DB_SIZE; xx++, p_ent++) |
| { |
| /* mark all pending LE entry as unused if an LE only device has scan response outstanding */ |
| if ((p_ent->in_use) && |
| (p_ent->inq_info.results.device_type == BT_DEVICE_TYPE_BLE) && |
| !p_ent->scan_rsp) |
| p_ent->in_use = FALSE; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_send_sel_conn_callback |
| ** |
| ** Description send selection connection request callback. |
| ** |
| ** Parameters |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_send_sel_conn_callback(BD_ADDR remote_bda, UINT8 evt_type, UINT8 *p_data, UINT8 addr_type) |
| { |
| UINT8 data_len, len; |
| UINT8 *p_dev_name, remname[31] = {0}; |
| UNUSED(addr_type); |
| |
| if (btm_cb.ble_ctr_cb.p_select_cback == NULL || |
| /* non-connectable device */ |
| (evt_type != BTM_BLE_EVT_CONN_ADV && evt_type != BTM_BLE_EVT_CONN_DIR_ADV)) |
| return; |
| |
| STREAM_TO_UINT8 (data_len, p_data); |
| |
| /* get the device name if exist in ADV data */ |
| if (data_len != 0) |
| { |
| p_dev_name = BTM_CheckAdvData(p_data, BTM_BLE_AD_TYPE_NAME_CMPL, &len); |
| |
| if (p_dev_name == NULL) |
| p_dev_name = BTM_CheckAdvData(p_data, BTM_BLE_AD_TYPE_NAME_SHORT, &len); |
| |
| if (p_dev_name) |
| memcpy(remname, p_dev_name, len); |
| } |
| /* allow connection */ |
| if ((* btm_cb.ble_ctr_cb.p_select_cback)(remote_bda, remname)) |
| { |
| /* terminate selective connection, initiate connection */ |
| btm_ble_initiate_select_conn(remote_bda); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_process_adv_pkt |
| ** |
| ** Description This function is called when adv packet report events are |
| ** received from the device. It updates the inquiry database. |
| ** If the inquiry database is full, the oldest entry is discarded. |
| ** |
| ** Parameters |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_process_adv_pkt (UINT8 *p_data) |
| { |
| BD_ADDR bda; |
| UINT8 evt_type = 0, *p = p_data; |
| UINT8 addr_type = 0; |
| UINT8 num_reports; |
| UINT8 data_len; |
| #if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE) |
| BOOLEAN match = FALSE; |
| #endif |
| |
| /* Only process the results if the inquiry is still active */ |
| if (!BTM_BLE_IS_SCAN_ACTIVE(btm_cb.ble_ctr_cb.scan_activity)) |
| return; |
| |
| /* Extract the number of reports in this event. */ |
| STREAM_TO_UINT8(num_reports, p); |
| |
| while (num_reports--) |
| { |
| /* Extract inquiry results */ |
| STREAM_TO_UINT8 (evt_type, p); |
| STREAM_TO_UINT8 (addr_type, p); |
| STREAM_TO_BDADDR (bda, p); |
| |
| #if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE) |
| /* map address to security record */ |
| match = btm_identity_addr_to_random_pseudo(bda, &addr_type, FALSE); |
| |
| BTM_TRACE_DEBUG("btm_ble_process_adv_pkt:bda= %0x:%0x:%0x:%0x:%0x:%0x", |
| bda[0],bda[1],bda[2],bda[3],bda[4],bda[5]); |
| /* always do RRA resolution on host */ |
| if (!match && BTM_BLE_IS_RESOLVE_BDA(bda)) |
| { |
| btm_ble_resolve_random_addr(bda, btm_ble_resolve_random_addr_on_adv, p_data); |
| } |
| else |
| #endif |
| btm_ble_process_adv_pkt_cont(bda, addr_type, evt_type, p); |
| |
| STREAM_TO_UINT8(data_len, p); |
| |
| /* Advance to the next event data_len + rssi byte */ |
| p += data_len + 1; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_process_adv_pkt_cont |
| ** |
| ** Description This function is called after random address resolution is |
| ** done, and proceed to process adv packet. |
| ** |
| ** Parameters |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void btm_ble_process_adv_pkt_cont(BD_ADDR bda, UINT8 addr_type, UINT8 evt_type, UINT8 *p) |
| { |
| tINQ_DB_ENT *p_i; |
| tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars; |
| tBTM_INQ_RESULTS_CB *p_inq_results_cb = p_inq->p_inq_results_cb; |
| tBTM_INQ_RESULTS_CB *p_obs_results_cb = btm_cb.ble_ctr_cb.p_obs_results_cb; |
| tBTM_BLE_INQ_CB *p_le_inq_cb = &btm_cb.ble_ctr_cb.inq_var; |
| BOOLEAN update = TRUE; |
| UINT8 result = 0; |
| |
| p_i = btm_inq_db_find (bda); |
| |
| /* Check if this address has already been processed for this inquiry */ |
| if (btm_inq_find_bdaddr(bda)) |
| { |
| /* never been report as an LE device */ |
| if (p_i && |
| (!(p_i->inq_info.results.device_type & BT_DEVICE_TYPE_BLE) || |
| /* scan repsonse to be updated */ |
| (!p_i->scan_rsp))) |
| { |
| update = TRUE; |
| } |
| else if (BTM_BLE_IS_OBS_ACTIVE(btm_cb.ble_ctr_cb.scan_activity)) |
| { |
| update = FALSE; |
| } |
| else |
| { |
| /* if yes, skip it */ |
| return; /* assumption: one result per event */ |
| } |
| } |
| /* If existing entry, use that, else get a new one (possibly reusing the oldest) */ |
| if (p_i == NULL) |
| { |
| if ((p_i = btm_inq_db_new (bda)) != NULL) |
| { |
| p_inq->inq_cmpl_info.num_resp++; |
| } |
| else |
| return; |
| } |
| else if (p_i->inq_count != p_inq->inq_counter) /* first time seen in this inquiry */ |
| { |
| p_inq->inq_cmpl_info.num_resp++; |
| } |
| /* update the LE device information in inquiry database */ |
| if (!btm_ble_update_inq_result(p_i, addr_type, evt_type, p)) |
| return; |
| |
| if ((result = btm_ble_is_discoverable(bda, evt_type, p)) == 0) |
| { |
| LOG_WARN(LOG_TAG, "%s device is no longer discoverable so discarding advertising packet pkt", |
| __func__); |
| return; |
| } |
| if (!update) |
| result &= ~BTM_BLE_INQ_RESULT; |
| /* If the number of responses found and limited, issue a cancel inquiry */ |
| if (p_inq->inqparms.max_resps && |
| p_inq->inq_cmpl_info.num_resp == p_inq->inqparms.max_resps) |
| { |
| /* new device */ |
| if (p_i == NULL || |
| /* assume a DUMO device, BR/EDR inquiry is always active */ |
| (p_i && |
| (p_i->inq_info.results.device_type & BT_DEVICE_TYPE_BLE) == BT_DEVICE_TYPE_BLE && |
| p_i->scan_rsp)) |
| { |
| BTM_TRACE_WARNING("INQ RES: Extra Response Received...cancelling inquiry.."); |
| |
| /* if is non-periodic inquiry active, cancel now */ |
| if ((p_inq->inq_active & BTM_BR_INQ_ACTIVE_MASK) != 0 && |
| (p_inq->inq_active & BTM_PERIODIC_INQUIRY_ACTIVE) == 0) |
| btsnd_hcic_inq_cancel(); |
| |
| btm_ble_stop_inquiry(); |
| |
| btm_acl_update_busy_level (BTM_BLI_INQ_DONE_EVT); |
| } |
| } |
| /* background connection in selective connection mode */ |
| if (btm_cb.ble_ctr_cb.bg_conn_type == BTM_BLE_CONN_SELECTIVE) |
| { |
| if (result & BTM_BLE_SEL_CONN_RESULT) |
| btm_send_sel_conn_callback(bda, evt_type, p, addr_type); |
| else |
| { |
| BTM_TRACE_DEBUG("None LE device, can not initiate selective connection"); |
| } |
| } |
| else |
| { |
| if (p_inq_results_cb && (result & BTM_BLE_INQ_RESULT)) |
| { |
| (p_inq_results_cb)((tBTM_INQ_RESULTS *) &p_i->inq_info.results, p_le_inq_cb->adv_data_cache); |
| } |
| if (p_obs_results_cb && (result & BTM_BLE_OBS_RESULT)) |
| { |
| (p_obs_results_cb)((tBTM_INQ_RESULTS *) &p_i->inq_info.results, p_le_inq_cb->adv_data_cache); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_start_scan |
| ** |
| ** Description Start the BLE scan. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_ble_start_scan(void) |
| { |
| tBTM_BLE_INQ_CB *p_inq = &btm_cb.ble_ctr_cb.inq_var; |
| tBTM_STATUS status = BTM_CMD_STARTED; |
| |
| /* start scan, disable duplicate filtering */ |
| if (!btsnd_hcic_ble_set_scan_enable (BTM_BLE_SCAN_ENABLE, p_inq->scan_duplicate_filter)) |
| { |
| status = BTM_NO_RESOURCES; |
| } |
| else |
| { |
| if (p_inq->scan_type == BTM_BLE_SCAN_MODE_ACTI) |
| btm_ble_set_topology_mask(BTM_BLE_STATE_ACTIVE_SCAN_BIT); |
| else |
| btm_ble_set_topology_mask(BTM_BLE_STATE_PASSIVE_SCAN_BIT); |
| } |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_stop_scan |
| ** |
| ** Description Stop the BLE scan. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_stop_scan(void) |
| { |
| BTM_TRACE_EVENT ("btm_ble_stop_scan "); |
| |
| /* Clear the inquiry callback if set */ |
| btm_cb.ble_ctr_cb.inq_var.scan_type = BTM_BLE_SCAN_MODE_NONE; |
| |
| /* stop discovery now */ |
| btsnd_hcic_ble_set_scan_enable (BTM_BLE_SCAN_DISABLE, BTM_BLE_DUPLICATE_ENABLE); |
| |
| btm_update_scanner_filter_policy(SP_ADV_ALL); |
| |
| btm_cb.ble_ctr_cb.wl_state &= ~BTM_BLE_WL_SCAN; |
| } |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_stop_inquiry |
| ** |
| ** Description Stop the BLE Inquiry. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_stop_inquiry(void) |
| { |
| tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars; |
| tBTM_BLE_CB *p_ble_cb = &btm_cb.ble_ctr_cb; |
| |
| btu_stop_timer (&p_ble_cb->inq_var.inq_timer_ent); |
| |
| p_ble_cb->scan_activity &= ~BTM_BLE_INQUIRY_MASK; |
| |
| /* If no more scan activity, stop LE scan now */ |
| if (!BTM_BLE_IS_SCAN_ACTIVE(p_ble_cb->scan_activity)) |
| btm_ble_stop_scan(); |
| |
| /* If we have a callback registered for inquiry complete, call it */ |
| BTM_TRACE_DEBUG ("BTM Inq Compl Callback: status 0x%02x, num results %d", |
| p_inq->inq_cmpl_info.status, p_inq->inq_cmpl_info.num_resp); |
| |
| btm_process_inq_complete(HCI_SUCCESS, (UINT8)(p_inq->inqparms.mode & BTM_BLE_INQUIRY_MASK)); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_stop_observe |
| ** |
| ** Description Stop the BLE Observe. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void btm_ble_stop_observe(void) |
| { |
| tBTM_BLE_CB *p_ble_cb = & btm_cb.ble_ctr_cb; |
| tBTM_CMPL_CB *p_obs_cb = p_ble_cb->p_obs_cmpl_cb; |
| |
| btu_stop_timer (&p_ble_cb->obs_timer_ent); |
| |
| p_ble_cb->scan_activity &= ~BTM_LE_OBSERVE_ACTIVE; |
| |
| p_ble_cb->p_obs_results_cb = NULL; |
| p_ble_cb->p_obs_cmpl_cb = NULL; |
| |
| if (!BTM_BLE_IS_SCAN_ACTIVE(p_ble_cb->scan_activity)) |
| btm_ble_stop_scan(); |
| |
| if (p_obs_cb) |
| (p_obs_cb)((tBTM_INQUIRY_CMPL *) &btm_cb.btm_inq_vars.inq_cmpl_info); |
| } |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_adv_states_operation |
| ** |
| ** Description Set or clear adv states in topology mask |
| ** |
| ** Returns operation status. TRUE if sucessful, FALSE otherwise. |
| ** |
| *******************************************************************************/ |
| typedef BOOLEAN (BTM_TOPOLOGY_FUNC_PTR)(tBTM_BLE_STATE_MASK); |
| static BOOLEAN btm_ble_adv_states_operation(BTM_TOPOLOGY_FUNC_PTR *p_handler, UINT8 adv_evt) |
| { |
| BOOLEAN rt = FALSE; |
| |
| switch (adv_evt) |
| { |
| case BTM_BLE_CONNECT_EVT: |
| rt = (*p_handler)(BTM_BLE_STATE_CONN_ADV_BIT); |
| break; |
| |
| case BTM_BLE_NON_CONNECT_EVT: |
| rt = (*p_handler) (BTM_BLE_STATE_NON_CONN_ADV_BIT); |
| break; |
| case BTM_BLE_CONNECT_DIR_EVT: |
| rt = (*p_handler) (BTM_BLE_STATE_HI_DUTY_DIR_ADV_BIT); |
| break; |
| |
| case BTM_BLE_DISCOVER_EVT: |
| rt = (*p_handler) (BTM_BLE_STATE_SCAN_ADV_BIT); |
| break; |
| |
| case BTM_BLE_CONNECT_LO_DUTY_DIR_EVT: |
| rt = (*p_handler) (BTM_BLE_STATE_LO_DUTY_DIR_ADV_BIT); |
| break; |
| |
| default: |
| BTM_TRACE_ERROR("unknown adv event : %d", adv_evt); |
| break; |
| } |
| |
| return rt; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_start_adv |
| ** |
| ** Description start the BLE advertising. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_ble_start_adv(void) |
| { |
| tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var; |
| tBTM_STATUS rt = BTM_NO_RESOURCES; |
| |
| if (!btm_ble_adv_states_operation (btm_ble_topology_check, p_cb->evt_type)) |
| return BTM_WRONG_MODE; |
| |
| #if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE) |
| /* To relax resolving list, always have resolving list enabled, unless directed adv */ |
| if (p_cb->evt_type != BTM_BLE_CONNECT_LO_DUTY_DIR_EVT && |
| p_cb->evt_type != BTM_BLE_CONNECT_DIR_EVT) |
| /* enable resolving list is desired */ |
| btm_ble_enable_resolving_list_for_platform(BTM_BLE_RL_ADV); |
| #endif |
| if (p_cb->afp != AP_SCAN_CONN_ALL) |
| { |
| btm_execute_wl_dev_operation(); |
| btm_cb.ble_ctr_cb.wl_state |= BTM_BLE_WL_ADV; |
| } |
| |
| if (btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_ENABLE)) |
| { |
| p_cb->adv_mode = BTM_BLE_ADV_ENABLE; |
| btm_ble_adv_states_operation(btm_ble_set_topology_mask, p_cb->evt_type); |
| rt = BTM_SUCCESS; |
| } |
| else |
| { |
| p_cb->adv_mode = BTM_BLE_ADV_DISABLE; |
| btm_cb.ble_ctr_cb.wl_state &= ~BTM_BLE_WL_ADV; |
| } |
| return rt; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_stop_adv |
| ** |
| ** Description Stop the BLE advertising. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_ble_stop_adv(void) |
| { |
| tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var; |
| tBTM_STATUS rt = BTM_SUCCESS; |
| |
| if (p_cb->adv_mode == BTM_BLE_ADV_ENABLE) |
| { |
| if (btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_DISABLE)) |
| { |
| p_cb->fast_adv_on = FALSE; |
| p_cb->adv_mode = BTM_BLE_ADV_DISABLE; |
| btm_cb.ble_ctr_cb.wl_state &= ~BTM_BLE_WL_ADV; |
| |
| /* clear all adv states */ |
| btm_ble_clear_topology_mask (BTM_BLE_STATE_ALL_ADV_MASK); |
| } |
| else |
| rt = BTM_NO_RESOURCES; |
| } |
| return rt; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_start_slow_adv |
| ** |
| ** Description Restart adv with slow adv interval |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void btm_ble_start_slow_adv (void) |
| { |
| tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var; |
| |
| if (p_cb->adv_mode == BTM_BLE_ADV_ENABLE) |
| { |
| tBTM_LE_RANDOM_CB *p_addr_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb; |
| BD_ADDR p_addr_ptr = {0}; |
| tBLE_ADDR_TYPE init_addr_type = BLE_ADDR_PUBLIC; |
| tBLE_ADDR_TYPE own_addr_type = p_addr_cb->own_addr_type; |
| |
| btm_ble_stop_adv(); |
| |
| p_cb->evt_type = btm_set_conn_mode_adv_init_addr(p_cb, p_addr_ptr, &init_addr_type, |
| &own_addr_type); |
| |
| /* slow adv mode never goes into directed adv */ |
| btsnd_hcic_ble_write_adv_params (BTM_BLE_GAP_ADV_SLOW_INT, BTM_BLE_GAP_ADV_SLOW_INT, |
| p_cb->evt_type, own_addr_type, |
| init_addr_type, p_addr_ptr, |
| p_cb->adv_chnl_map, p_cb->afp); |
| |
| btm_ble_start_adv(); |
| } |
| } |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_timeout |
| ** |
| ** Description Called when BTM BLE inquiry timer expires |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_timeout(TIMER_LIST_ENT *p_tle) |
| { |
| BTM_TRACE_EVENT ("btm_ble_timeout"); |
| |
| switch (p_tle->event) |
| { |
| case BTU_TTYPE_BLE_OBSERVE: |
| btm_ble_stop_observe(); |
| break; |
| |
| case BTU_TTYPE_BLE_INQUIRY: |
| btm_ble_stop_inquiry(); |
| break; |
| |
| case BTU_TTYPE_BLE_GAP_LIM_DISC: |
| /* lim_timeout expiried, limited discovery should exit now */ |
| btm_cb.btm_inq_vars.discoverable_mode &= ~BTM_BLE_LIMITED_DISCOVERABLE; |
| btm_ble_set_adv_flag(btm_cb.btm_inq_vars.connectable_mode, btm_cb.btm_inq_vars.discoverable_mode); |
| break; |
| |
| case BTU_TTYPE_BLE_RANDOM_ADDR: |
| if (btm_cb.ble_ctr_cb.addr_mgnt_cb.own_addr_type == BLE_ADDR_RANDOM) |
| { |
| if (NULL == (void *)(p_tle->param)) |
| { |
| /* refresh the random addr */ |
| btm_gen_resolvable_private_addr((void *)btm_gen_resolve_paddr_low); |
| } |
| else |
| { |
| if (BTM_BleMaxMultiAdvInstanceCount() > 0) |
| btm_ble_multi_adv_configure_rpa((tBTM_BLE_MULTI_ADV_INST*)p_tle->param); |
| } |
| } |
| break; |
| |
| case BTU_TTYPE_BLE_GAP_FAST_ADV: |
| /* fast adv is completed, fall back to slow adv interval */ |
| btm_ble_start_slow_adv(); |
| break; |
| |
| default: |
| break; |
| |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_read_remote_features_complete |
| ** |
| ** Description This function is called when the command complete message |
| ** is received from the HCI for the read LE remote feature supported |
| ** complete event. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_read_remote_features_complete(UINT8 *p) |
| { |
| tACL_CONN *p_acl_cb = &btm_cb.acl_db[0]; |
| UINT16 handle; |
| UINT8 status; |
| int xx; |
| |
| BTM_TRACE_EVENT ("btm_ble_read_remote_features_complete "); |
| |
| STREAM_TO_UINT8(status, p); |
| |
| // if LE read remote feature failed for HCI_ERR_CONN_FAILED_ESTABLISHMENT, |
| // expect disconnect complete to be received |
| if (status != HCI_ERR_CONN_FAILED_ESTABLISHMENT) |
| { |
| STREAM_TO_UINT16 (handle, p); |
| |
| /* Look up the connection by handle and copy features */ |
| for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_acl_cb++) |
| { |
| if ((p_acl_cb->in_use) && (p_acl_cb->hci_handle == handle)) |
| { |
| STREAM_TO_ARRAY(p_acl_cb->peer_le_features, p, BD_FEATURES_LEN); |
| /*notify link up here */ |
| l2cble_notify_le_connection (p_acl_cb->remote_addr); |
| break; |
| } |
| } |
| } |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_write_adv_enable_complete |
| ** |
| ** Description This function process the write adv enable command complete. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_write_adv_enable_complete(UINT8 * p) |
| { |
| tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var; |
| |
| /* if write adv enable/disbale not succeed */ |
| if (*p != HCI_SUCCESS) |
| { |
| /* toggle back the adv mode */ |
| p_cb->adv_mode = !p_cb->adv_mode; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_dir_adv_tout |
| ** |
| ** Description when directed adv time out |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_dir_adv_tout(void) |
| { |
| btm_cb.ble_ctr_cb.inq_var.adv_mode = BTM_BLE_ADV_DISABLE; |
| |
| /* make device fall back into undirected adv mode by default */ |
| btm_cb.ble_ctr_cb.inq_var.directed_conn = FALSE; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_set_topology_mask |
| ** |
| ** Description set BLE topology mask |
| ** |
| ** Returns TRUE is request is allowed, FALSE otherwise. |
| ** |
| *******************************************************************************/ |
| BOOLEAN btm_ble_set_topology_mask(tBTM_BLE_STATE_MASK request_state_mask) |
| { |
| request_state_mask &= BTM_BLE_STATE_ALL_MASK; |
| btm_cb.ble_ctr_cb.cur_states |= (request_state_mask & BTM_BLE_STATE_ALL_MASK); |
| return TRUE; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_clear_topology_mask |
| ** |
| ** Description Clear BLE topology bit mask |
| ** |
| ** Returns TRUE is request is allowed, FALSE otherwise. |
| ** |
| *******************************************************************************/ |
| BOOLEAN btm_ble_clear_topology_mask (tBTM_BLE_STATE_MASK request_state_mask) |
| { |
| request_state_mask &= BTM_BLE_STATE_ALL_MASK; |
| btm_cb.ble_ctr_cb.cur_states &= ~request_state_mask; |
| return TRUE; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_update_link_topology_mask |
| ** |
| ** Description This function update the link topology mask |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_update_link_topology_mask(UINT8 link_role, BOOLEAN increase) |
| { |
| btm_ble_clear_topology_mask (BTM_BLE_STATE_ALL_CONN_MASK); |
| |
| if (increase) |
| btm_cb.ble_ctr_cb.link_count[link_role]++; |
| else if (btm_cb.ble_ctr_cb.link_count[link_role] > 0) |
| btm_cb.ble_ctr_cb.link_count[link_role]--; |
| |
| if (btm_cb.ble_ctr_cb.link_count[HCI_ROLE_MASTER]) |
| btm_ble_set_topology_mask (BTM_BLE_STATE_MASTER_BIT); |
| |
| if (btm_cb.ble_ctr_cb.link_count[HCI_ROLE_SLAVE]) |
| btm_ble_set_topology_mask(BTM_BLE_STATE_SLAVE_BIT); |
| |
| if (link_role == HCI_ROLE_SLAVE && increase) |
| { |
| btm_cb.ble_ctr_cb.inq_var.adv_mode = BTM_BLE_ADV_DISABLE; |
| /* make device fall back into undirected adv mode by default */ |
| btm_cb.ble_ctr_cb.inq_var.directed_conn = BTM_BLE_CONNECT_EVT; |
| /* clear all adv states */ |
| btm_ble_clear_topology_mask(BTM_BLE_STATE_ALL_ADV_MASK); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_update_mode_operation |
| ** |
| ** Description This function update the GAP role operation when a link status |
| ** is updated. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_update_mode_operation(UINT8 link_role, BD_ADDR bd_addr, UINT8 status) |
| { |
| if (status == HCI_ERR_DIRECTED_ADVERTISING_TIMEOUT) |
| { |
| btm_cb.ble_ctr_cb.inq_var.adv_mode = BTM_BLE_ADV_DISABLE; |
| /* make device fall back into undirected adv mode by default */ |
| btm_cb.ble_ctr_cb.inq_var.directed_conn = BTM_BLE_CONNECT_EVT; |
| /* clear all adv states */ |
| btm_ble_clear_topology_mask (BTM_BLE_STATE_ALL_ADV_MASK); |
| } |
| |
| if (btm_cb.ble_ctr_cb.inq_var.connectable_mode == BTM_BLE_CONNECTABLE) |
| { |
| btm_ble_set_connectability(btm_cb.btm_inq_vars.connectable_mode | |
| btm_cb.ble_ctr_cb.inq_var.connectable_mode); |
| } |
| |
| /* when no connection is attempted, and controller is not rejecting last request |
| due to resource limitation, start next direct connection or background connection |
| now in order */ |
| if (btm_ble_get_conn_st() == BLE_CONN_IDLE && status != HCI_ERR_HOST_REJECT_RESOURCES && |
| !btm_send_pending_direct_conn()) |
| { |
| btm_ble_resume_bg_conn(); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_init |
| ** |
| ** Description Initialize the control block variable values. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_init (void) |
| { |
| tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb; |
| |
| BTM_TRACE_DEBUG("%s", __func__); |
| |
| memset(p_cb, 0, sizeof(tBTM_BLE_CB)); |
| memset(&(btm_cb.cmn_ble_vsc_cb), 0 , sizeof(tBTM_BLE_VSC_CB)); |
| btm_cb.cmn_ble_vsc_cb.values_read = FALSE; |
| p_cb->cur_states = 0; |
| |
| p_cb->inq_var.adv_mode = BTM_BLE_ADV_DISABLE; |
| p_cb->inq_var.scan_type = BTM_BLE_SCAN_MODE_NONE; |
| p_cb->inq_var.adv_chnl_map = BTM_BLE_DEFAULT_ADV_CHNL_MAP; |
| p_cb->inq_var.afp = BTM_BLE_DEFAULT_AFP; |
| p_cb->inq_var.sfp = BTM_BLE_DEFAULT_SFP; |
| p_cb->inq_var.connectable_mode = BTM_BLE_NON_CONNECTABLE; |
| p_cb->inq_var.discoverable_mode = BTM_BLE_NON_DISCOVERABLE; |
| |
| /* for background connection, reset connection params to be undefined */ |
| p_cb->scan_int = p_cb->scan_win = BTM_BLE_SCAN_PARAM_UNDEF; |
| |
| p_cb->inq_var.evt_type = BTM_BLE_NON_CONNECT_EVT; |
| |
| #if BLE_VND_INCLUDED == FALSE |
| btm_ble_adv_filter_init(); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_topology_check |
| ** |
| ** Description check to see requested state is supported. One state check at |
| ** a time is supported |
| ** |
| ** Returns TRUE is request is allowed, FALSE otherwise. |
| ** |
| *******************************************************************************/ |
| BOOLEAN btm_ble_topology_check(tBTM_BLE_STATE_MASK request_state_mask) |
| { |
| BOOLEAN rt = FALSE; |
| |
| UINT8 state_offset = 0; |
| UINT16 cur_states = btm_cb.ble_ctr_cb.cur_states; |
| UINT8 mask, offset; |
| UINT8 request_state = 0; |
| |
| /* check only one bit is set and within valid range */ |
| if (request_state_mask == BTM_BLE_STATE_INVALID || |
| request_state_mask > BTM_BLE_STATE_SCAN_ADV_BIT || |
| (request_state_mask & (request_state_mask -1 )) != 0) |
| { |
| BTM_TRACE_ERROR("illegal state requested: %d", request_state_mask); |
| return rt; |
| } |
| |
| while (request_state_mask) |
| { |
| request_state_mask >>= 1; |
| request_state ++; |
| } |
| |
| /* check if the requested state is supported or not */ |
| mask = btm_le_state_combo_tbl[0][request_state - 1][0]; |
| offset = btm_le_state_combo_tbl[0][request_state-1][1]; |
| |
| const uint8_t *ble_supported_states = controller_get_interface()->get_ble_supported_states(); |
| |
| if (!BTM_LE_STATES_SUPPORTED(ble_supported_states, mask, offset)) |
| { |
| BTM_TRACE_ERROR("state requested not supported: %d", request_state); |
| return rt; |
| } |
| |
| rt = TRUE; |
| /* make sure currently active states are all supported in conjunction with the requested |
| state. If the bit in table is not set, the combination is not supported */ |
| while (cur_states != 0) |
| { |
| if (cur_states & 0x01) |
| { |
| mask = btm_le_state_combo_tbl[request_state][state_offset][0]; |
| offset = btm_le_state_combo_tbl[request_state][state_offset][1]; |
| |
| if (mask != 0 && offset != 0) |
| { |
| if (!BTM_LE_STATES_SUPPORTED(ble_supported_states, mask, offset)) |
| { |
| rt = FALSE; |
| break; |
| } |
| } |
| } |
| cur_states >>= 1; |
| state_offset ++; |
| } |
| return rt; |
| } |
| |
| #endif /* BLE_INCLUDED */ |