| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * this file contains the functions relating to link management. A "link" |
| * is a connection between this device and another device. Only ACL links |
| * are managed. |
| * |
| ******************************************************************************/ |
| |
| #include <stdlib.h> |
| #include <string.h> |
| #include <stdio.h> |
| |
| #include "gki.h" |
| #include "bt_types.h" |
| #include "bt_utils.h" |
| #include "hcimsgs.h" |
| #include "l2cdefs.h" |
| #include "l2c_int.h" |
| #include "l2c_api.h" |
| #include "btu.h" |
| #include "btm_api.h" |
| #include "btm_int.h" |
| |
| static BOOLEAN l2c_link_send_to_lower (tL2C_LCB *p_lcb, BT_HDR *p_buf); |
| |
| #define L2C_LINK_SEND_ACL_DATA(x) HCI_ACL_DATA_TO_LOWER((x)) |
| |
| #if (BLE_INCLUDED == TRUE) |
| #define L2C_LINK_SEND_BLE_ACL_DATA(x) HCI_BLE_ACL_DATA_TO_LOWER((x)) |
| #endif |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_hci_conn_req |
| ** |
| ** Description This function is called when an HCI Connection Request |
| ** event is received. |
| ** |
| ** Returns TRUE, if accept conn |
| ** |
| *******************************************************************************/ |
| BOOLEAN l2c_link_hci_conn_req (BD_ADDR bd_addr) |
| { |
| tL2C_LCB *p_lcb; |
| tL2C_LCB *p_lcb_cur; |
| int xx; |
| BOOLEAN no_links; |
| |
| /* See if we have a link control block for the remote device */ |
| p_lcb = l2cu_find_lcb_by_bd_addr (bd_addr); |
| |
| /* If we don't have one, create one and accept the connection. */ |
| if (!p_lcb) |
| { |
| p_lcb = l2cu_allocate_lcb (bd_addr, FALSE); |
| if (!p_lcb) |
| { |
| btsnd_hcic_reject_conn (bd_addr, HCI_ERR_HOST_REJECT_RESOURCES); |
| L2CAP_TRACE_ERROR0 ("L2CAP failed to allocate LCB"); |
| return FALSE; |
| } |
| |
| no_links = TRUE; |
| |
| /* If we already have connection, accept as a master */ |
| for (xx = 0, p_lcb_cur = &l2cb.lcb_pool[0]; xx < MAX_L2CAP_LINKS; xx++, p_lcb_cur++) |
| { |
| if (p_lcb_cur == p_lcb) |
| continue; |
| |
| if (p_lcb_cur->in_use) |
| { |
| no_links = FALSE; |
| p_lcb->link_role = HCI_ROLE_MASTER; |
| break; |
| } |
| } |
| |
| if (no_links) |
| { |
| if (!btm_dev_support_switch (bd_addr)) |
| p_lcb->link_role = HCI_ROLE_SLAVE; |
| else |
| p_lcb->link_role = l2cu_get_conn_role(bd_addr); |
| } |
| |
| /* Tell the other side we accept the connection */ |
| btsnd_hcic_accept_conn (bd_addr, p_lcb->link_role); |
| |
| p_lcb->link_state = LST_CONNECTING; |
| |
| /* Start a timer waiting for connect complete */ |
| btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_LINK_CONNECT_TOUT); |
| return (TRUE); |
| } |
| |
| /* We already had a link control block to the guy. Check what state it is in */ |
| if ((p_lcb->link_state == LST_CONNECTING) || (p_lcb->link_state == LST_CONNECT_HOLDING)) |
| { |
| /* Connection collision. Accept the connection anyways. */ |
| |
| if (!btm_dev_support_switch (bd_addr)) |
| p_lcb->link_role = HCI_ROLE_SLAVE; |
| else |
| p_lcb->link_role = l2cu_get_conn_role(bd_addr); |
| |
| btsnd_hcic_accept_conn (bd_addr, p_lcb->link_role); |
| |
| p_lcb->link_state = LST_CONNECTING; |
| return (TRUE); |
| } |
| else if (p_lcb->link_state == LST_DISCONNECTING) |
| { |
| /* In disconnecting state, reject the connection. */ |
| btsnd_hcic_reject_conn (bd_addr, HCI_ERR_HOST_REJECT_DEVICE); |
| } |
| else |
| { |
| L2CAP_TRACE_ERROR1("L2CAP got conn_req while connected (state:%d). Reject it", |
| p_lcb->link_state); |
| /* Reject the connection with ACL Connection Already exist reason */ |
| btsnd_hcic_reject_conn (bd_addr, HCI_ERR_CONNECTION_EXISTS); |
| } |
| return (FALSE); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_hci_conn_comp |
| ** |
| ** Description This function is called when an HCI Connection Complete |
| ** event is received. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BOOLEAN l2c_link_hci_conn_comp (UINT8 status, UINT16 handle, BD_ADDR p_bda) |
| { |
| tL2C_CONN_INFO ci; |
| tL2C_LCB *p_lcb; |
| tL2C_CCB *p_ccb; |
| tBTM_SEC_DEV_REC *p_dev_info = NULL; |
| |
| #if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE) |
| btm_acl_update_busy_level (BTM_BLI_PAGE_DONE_EVT); |
| #endif |
| |
| /* Save the parameters */ |
| ci.status = status; |
| memcpy (ci.bd_addr, p_bda, BD_ADDR_LEN); |
| |
| /* See if we have a link control block for the remote device */ |
| p_lcb = l2cu_find_lcb_by_bd_addr (ci.bd_addr); |
| |
| /* If we don't have one, this is an error */ |
| if (!p_lcb) |
| { |
| L2CAP_TRACE_WARNING0 ("L2CAP got conn_comp for unknown BD_ADDR"); |
| return (FALSE); |
| } |
| |
| if (p_lcb->link_state != LST_CONNECTING) |
| { |
| L2CAP_TRACE_ERROR2 ("L2CAP got conn_comp in bad state: %d status: 0x%d", p_lcb->link_state, status); |
| |
| if (status != HCI_SUCCESS) |
| l2c_link_hci_disc_comp (p_lcb->handle, status); |
| |
| return (FALSE); |
| } |
| |
| /* Save the handle */ |
| p_lcb->handle = handle; |
| |
| if (ci.status == HCI_SUCCESS) |
| { |
| /* Connected OK. Change state to connected */ |
| p_lcb->link_state = LST_CONNECTED; |
| |
| /* Get the peer information if the l2cap flow-control/rtrans is supported */ |
| l2cu_send_peer_info_req (p_lcb, L2CAP_EXTENDED_FEATURES_INFO_TYPE); |
| |
| /* Tell BTM Acl management about the link */ |
| if ((p_dev_info = btm_find_dev (p_bda)) != NULL) |
| btm_acl_created (ci.bd_addr, p_dev_info->dev_class, |
| p_dev_info->sec_bd_name, handle, |
| p_lcb->link_role, FALSE); |
| else |
| btm_acl_created (ci.bd_addr, NULL, NULL, handle, p_lcb->link_role, FALSE); |
| |
| BTM_SetLinkSuperTout (ci.bd_addr, btm_cb.btm_def_link_super_tout); |
| |
| /* If dedicated bonding do not process any further */ |
| if (p_lcb->is_bonding) |
| { |
| if (l2cu_start_post_bond_timer(handle)) |
| return (TRUE); |
| } |
| |
| /* Update the timeouts in the hold queue */ |
| l2c_process_held_packets(FALSE); |
| |
| btu_stop_timer (&p_lcb->timer_entry); |
| |
| /* For all channels, send the event through their FSMs */ |
| for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb) |
| { |
| l2c_csm_execute (p_ccb, L2CEVT_LP_CONNECT_CFM, &ci); |
| } |
| |
| if (p_lcb->p_echo_rsp_cb) |
| { |
| l2cu_send_peer_echo_req (p_lcb, NULL, 0); |
| btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_ECHO_RSP_TOUT); |
| } |
| else if (!p_lcb->ccb_queue.p_first_ccb) |
| { |
| btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_LINK_STARTUP_TOUT); |
| } |
| } |
| /* Max number of acl connections. */ |
| /* If there's an lcb disconnecting set this one to holding */ |
| else if ((ci.status == HCI_ERR_MAX_NUM_OF_CONNECTIONS) && l2cu_lcb_disconnecting()) |
| { |
| p_lcb->link_state = LST_CONNECT_HOLDING; |
| p_lcb->handle = HCI_INVALID_HANDLE; |
| } |
| else |
| { |
| /* Just in case app decides to try again in the callback context */ |
| p_lcb->link_state = LST_DISCONNECTING; |
| |
| /* Connection failed. For all channels, send the event through */ |
| /* their FSMs. The CCBs should remove themselves from the LCB */ |
| for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; ) |
| { |
| tL2C_CCB *pn = p_ccb->p_next_ccb; |
| |
| l2c_csm_execute (p_ccb, L2CEVT_LP_CONNECT_CFM_NEG, &ci); |
| |
| p_ccb = pn; |
| } |
| |
| p_lcb->disc_reason = status; |
| /* Release the LCB */ |
| if (p_lcb->ccb_queue.p_first_ccb == NULL) |
| l2cu_release_lcb (p_lcb); |
| else /* there are any CCBs remaining */ |
| { |
| if (ci.status == HCI_ERR_CONNECTION_EXISTS) |
| { |
| /* we are in collision situation, wait for connecttion request from controller */ |
| p_lcb->link_state = LST_CONNECTING; |
| } |
| else |
| { |
| l2cu_create_conn(p_lcb); |
| } |
| } |
| } |
| return (TRUE); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_sec_comp |
| ** |
| ** Description This function is called when required security procedures |
| ** are completed. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void l2c_link_sec_comp (BD_ADDR p_bda, void *p_ref_data, UINT8 status) |
| { |
| tL2C_CONN_INFO ci; |
| tL2C_LCB *p_lcb; |
| tL2C_CCB *p_ccb; |
| tL2C_CCB *p_next_ccb; |
| UINT8 event; |
| |
| L2CAP_TRACE_DEBUG2 ("l2c_link_sec_comp: %d, 0x%x", status, p_ref_data); |
| |
| if (status == BTM_SUCCESS_NO_SECURITY) |
| status = BTM_SUCCESS; |
| |
| /* Save the parameters */ |
| ci.status = status; |
| memcpy (ci.bd_addr, p_bda, BD_ADDR_LEN); |
| |
| p_lcb = l2cu_find_lcb_by_bd_addr (p_bda); |
| |
| /* If we don't have one, this is an error */ |
| if (!p_lcb) |
| { |
| L2CAP_TRACE_WARNING0 ("L2CAP got sec_comp for unknown BD_ADDR"); |
| return; |
| } |
| |
| /* Match p_ccb with p_ref_data returned by sec manager */ |
| for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_next_ccb) |
| { |
| p_next_ccb = p_ccb->p_next_ccb; |
| |
| if (p_ccb == p_ref_data) |
| { |
| switch(status) |
| { |
| case BTM_SUCCESS: |
| L2CAP_TRACE_DEBUG1 ("ccb timer ticks: %u", p_ccb->timer_entry.ticks); |
| event = L2CEVT_SEC_COMP; |
| break; |
| |
| case BTM_DELAY_CHECK: |
| /* start a timer - encryption change not received before L2CAP connect req */ |
| btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_DELAY_CHECK_SM4); |
| return; |
| |
| default: |
| event = L2CEVT_SEC_COMP_NEG; |
| } |
| l2c_csm_execute (p_ccb, event, &ci); |
| break; |
| } |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_hci_disc_comp |
| ** |
| ** Description This function is called when an HCI Disconnect Complete |
| ** event is received. |
| ** |
| ** Returns TRUE if the link is known about, else FALSE |
| ** |
| *******************************************************************************/ |
| BOOLEAN l2c_link_hci_disc_comp (UINT16 handle, UINT8 reason) |
| { |
| tL2C_LCB *p_lcb; |
| tL2C_CCB *p_ccb; |
| BOOLEAN status = TRUE; |
| BOOLEAN lcb_is_free = TRUE; |
| |
| /* See if we have a link control block for the connection */ |
| p_lcb = l2cu_find_lcb_by_handle (handle); |
| |
| /* If we don't have one, maybe an SCO link. Send to MM */ |
| if (!p_lcb) |
| { |
| status = FALSE; |
| } |
| else |
| { |
| /* There can be a case when we rejected PIN code authentication */ |
| /* otherwise save a new reason */ |
| if (btm_cb.acl_disc_reason != HCI_ERR_HOST_REJECT_SECURITY) |
| btm_cb.acl_disc_reason = reason; |
| |
| p_lcb->disc_reason = btm_cb.acl_disc_reason; |
| |
| /* Just in case app decides to try again in the callback context */ |
| p_lcb->link_state = LST_DISCONNECTING; |
| |
| /* Link is disconnected. For all channels, send the event through */ |
| /* their FSMs. The CCBs should remove themselves from the LCB */ |
| for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; ) |
| { |
| tL2C_CCB *pn = p_ccb->p_next_ccb; |
| |
| /* Keep connect pending control block (if exists) |
| * Possible Race condition when a reconnect occurs |
| * on the channel during a disconnect of link. This |
| * ccb will be automatically retried after link disconnect |
| * arrives |
| */ |
| if (p_ccb != p_lcb->p_pending_ccb) |
| { |
| l2c_csm_execute (p_ccb, L2CEVT_LP_DISCONNECT_IND, &reason); |
| } |
| p_ccb = pn; |
| } |
| |
| #if BTM_SCO_INCLUDED == TRUE |
| /* Tell SCO management to drop any SCOs on this ACL */ |
| btm_sco_acl_removed (p_lcb->remote_bd_addr); |
| #endif |
| |
| /* If waiting for disconnect and reconnect is pending start the reconnect now |
| race condition where layer above issued connect request on link that was |
| disconnecting |
| */ |
| if (p_lcb->ccb_queue.p_first_ccb != NULL) |
| { |
| #if (L2CAP_NUM_FIXED_CHNLS > 0) |
| /* If we are going to re-use the LCB without dropping it, release all fixed channels here */ |
| int xx; |
| |
| for (xx = 0; xx < L2CAP_NUM_FIXED_CHNLS; xx++) |
| { |
| if (p_lcb->p_fixed_ccbs[xx]) |
| { |
| (*l2cb.fixed_reg[xx].pL2CA_FixedConn_Cb)(p_lcb->remote_bd_addr, FALSE, p_lcb->disc_reason); |
| l2cu_release_ccb (p_lcb->p_fixed_ccbs[xx]); |
| |
| p_lcb->p_fixed_ccbs[xx] = NULL; |
| } |
| } |
| #endif |
| L2CAP_TRACE_DEBUG0("l2c_link_hci_disc_comp: Restarting pending ACL request"); |
| |
| if (l2cu_create_conn(p_lcb)) |
| lcb_is_free = FALSE; /* still using this lcb */ |
| } |
| |
| p_lcb->p_pending_ccb = NULL; |
| |
| /* Release the LCB */ |
| if (lcb_is_free) |
| l2cu_release_lcb (p_lcb); |
| } |
| |
| /* Now that we have a free acl connection, see if any lcbs are pending */ |
| if (lcb_is_free && ((p_lcb = l2cu_find_lcb_by_state(LST_CONNECT_HOLDING)) != NULL)) |
| { |
| /* we found one-- create a connection */ |
| l2cu_create_conn(p_lcb); |
| } |
| |
| return status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_hci_qos_violation |
| ** |
| ** Description This function is called when an HCI QOS Violation |
| ** event is received. |
| ** |
| ** Returns TRUE if the link is known about, else FALSE |
| ** |
| *******************************************************************************/ |
| BOOLEAN l2c_link_hci_qos_violation (UINT16 handle) |
| { |
| tL2C_LCB *p_lcb; |
| tL2C_CCB *p_ccb; |
| |
| /* See if we have a link control block for the connection */ |
| p_lcb = l2cu_find_lcb_by_handle (handle); |
| |
| /* If we don't have one, maybe an SCO link. */ |
| if (!p_lcb) |
| return (FALSE); |
| |
| /* For all channels, tell the upper layer about it */ |
| for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb) |
| { |
| if (p_ccb->p_rcb->api.pL2CA_QoSViolationInd_Cb) |
| l2c_csm_execute (p_ccb, L2CEVT_LP_QOS_VIOLATION_IND, NULL); |
| } |
| |
| return (TRUE); |
| } |
| |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_timeout |
| ** |
| ** Description This function is called when a link timer expires |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void l2c_link_timeout (tL2C_LCB *p_lcb) |
| { |
| tL2C_CCB *p_ccb; |
| UINT16 timeout; |
| tBTM_STATUS rc; |
| |
| L2CAP_TRACE_EVENT3 ("L2CAP - l2c_link_timeout() link state %d first CCB %p is_bonding:%d", |
| p_lcb->link_state, p_lcb->ccb_queue.p_first_ccb, p_lcb->is_bonding); |
| |
| /* If link was connecting or disconnecting, clear all channels and drop the LCB */ |
| if ((p_lcb->link_state == LST_CONNECTING_WAIT_SWITCH) || |
| (p_lcb->link_state == LST_CONNECTING) || |
| (p_lcb->link_state == LST_CONNECT_HOLDING) || |
| (p_lcb->link_state == LST_DISCONNECTING)) |
| { |
| p_lcb->p_pending_ccb = NULL; |
| |
| /* For all channels, send a disconnect indication event through */ |
| /* their FSMs. The CCBs should remove themselves from the LCB */ |
| for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; ) |
| { |
| tL2C_CCB *pn = p_ccb->p_next_ccb; |
| |
| l2c_csm_execute (p_ccb, L2CEVT_LP_DISCONNECT_IND, NULL); |
| |
| p_ccb = pn; |
| } |
| #if (BLE_INCLUDED == TRUE) |
| if (p_lcb->link_state == LST_CONNECTING && |
| l2cb.is_ble_connecting == TRUE) |
| { |
| L2CA_CancelBleConnectReq(l2cb.ble_connecting_bda); |
| } |
| #endif |
| /* Release the LCB */ |
| l2cu_release_lcb (p_lcb); |
| } |
| |
| /* If link is connected, check for inactivity timeout */ |
| if (p_lcb->link_state == LST_CONNECTED) |
| { |
| /* Check for ping outstanding */ |
| if (p_lcb->p_echo_rsp_cb) |
| { |
| tL2CA_ECHO_RSP_CB *p_cb = p_lcb->p_echo_rsp_cb; |
| |
| /* Zero out the callback in case app immediately calls us again */ |
| p_lcb->p_echo_rsp_cb = NULL; |
| |
| (*p_cb) (L2CAP_PING_RESULT_NO_RESP); |
| |
| L2CAP_TRACE_WARNING0 ("L2CAP - ping timeout"); |
| |
| /* For all channels, send a disconnect indication event through */ |
| /* their FSMs. The CCBs should remove themselves from the LCB */ |
| for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; ) |
| { |
| tL2C_CCB *pn = p_ccb->p_next_ccb; |
| |
| l2c_csm_execute (p_ccb, L2CEVT_LP_DISCONNECT_IND, NULL); |
| |
| p_ccb = pn; |
| } |
| } |
| |
| /* If no channels in use, drop the link. */ |
| if (!p_lcb->ccb_queue.p_first_ccb) |
| { |
| rc = btm_sec_disconnect (p_lcb->handle, HCI_ERR_PEER_USER); |
| |
| if (rc == BTM_CMD_STORED) |
| { |
| /* Security Manager will take care of disconnecting, state will be updated at that time */ |
| timeout = 0xFFFF; |
| } |
| else if (rc == BTM_CMD_STARTED) |
| { |
| p_lcb->link_state = LST_DISCONNECTING; |
| timeout = L2CAP_LINK_DISCONNECT_TOUT; |
| } |
| else if (rc == BTM_SUCCESS) |
| { |
| /* BTM SEC will make sure that link is release (probably after pairing is done) */ |
| p_lcb->link_state = LST_DISCONNECTING; |
| timeout = 0xFFFF; |
| } |
| else if (rc == BTM_BUSY) |
| { |
| /* BTM is still executing security process. Let lcb stay as connected */ |
| timeout = 0xFFFF; |
| } |
| else if ((p_lcb->is_bonding) |
| && (btsnd_hcic_disconnect (p_lcb->handle, HCI_ERR_PEER_USER))) |
| { |
| p_lcb->link_state = LST_DISCONNECTING; |
| timeout = L2CAP_LINK_DISCONNECT_TOUT; |
| } |
| else |
| { |
| /* probably no buffer to send disconnect */ |
| timeout = BT_1SEC_TIMEOUT; |
| } |
| |
| if (timeout != 0xFFFF) |
| { |
| btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, timeout); |
| } |
| } |
| else |
| { |
| /* Check in case we were flow controlled */ |
| l2c_link_check_send_pkts (p_lcb, NULL, NULL); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_info_timeout |
| ** |
| ** Description This function is called when an info request times out |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void l2c_info_timeout (tL2C_LCB *p_lcb) |
| { |
| tL2C_CCB *p_ccb; |
| tL2C_CONN_INFO ci; |
| |
| /* If we timed out waiting for info response, just continue using basic if allowed */ |
| if (p_lcb->w4_info_rsp) |
| { |
| /* If waiting for security complete, restart the info response timer */ |
| for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb) |
| { |
| if ( (p_ccb->chnl_state == CST_ORIG_W4_SEC_COMP) || (p_ccb->chnl_state == CST_TERM_W4_SEC_COMP) ) |
| { |
| btu_start_timer (&p_lcb->info_timer_entry, BTU_TTYPE_L2CAP_INFO, L2CAP_WAIT_INFO_RSP_TOUT); |
| return; |
| } |
| } |
| |
| p_lcb->w4_info_rsp = FALSE; |
| |
| /* If link is in process of being brought up */ |
| if ((p_lcb->link_state != LST_DISCONNECTED) && |
| (p_lcb->link_state != LST_DISCONNECTING)) |
| { |
| /* Notify active channels that peer info is finished */ |
| if (p_lcb->ccb_queue.p_first_ccb) |
| { |
| ci.status = HCI_SUCCESS; |
| memcpy (ci.bd_addr, p_lcb->remote_bd_addr, sizeof(BD_ADDR)); |
| |
| for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb) |
| { |
| l2c_csm_execute (p_ccb, L2CEVT_L2CAP_INFO_RSP, &ci); |
| } |
| } |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_adjust_allocation |
| ** |
| ** Description This function is called when a link is created or removed |
| ** to calculate the amount of packets each link may send to |
| ** the HCI without an ack coming back. |
| ** |
| ** Currently, this is a simple allocation, dividing the |
| ** number of Controller Packets by the number of links. In |
| ** the future, QOS configuration should be examined. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void l2c_link_adjust_allocation (void) |
| { |
| UINT16 qq, yy, qq_remainder; |
| tL2C_LCB *p_lcb; |
| UINT16 hi_quota, low_quota; |
| UINT16 num_lowpri_links = 0; |
| UINT16 num_hipri_links = 0; |
| UINT16 controller_xmit_quota = l2cb.num_lm_acl_bufs; |
| UINT16 high_pri_link_quota = L2CAP_HIGH_PRI_MIN_XMIT_QUOTA_A; |
| |
| /* If no links active, reset buffer quotas and controller buffers */ |
| if (l2cb.num_links_active == 0) |
| { |
| l2cb.controller_xmit_window = l2cb.num_lm_acl_bufs; |
| l2cb.round_robin_quota = l2cb.round_robin_unacked = 0; |
| return; |
| } |
| |
| /* First, count the links */ |
| for (yy = 0, p_lcb = &l2cb.lcb_pool[0]; yy < MAX_L2CAP_LINKS; yy++, p_lcb++) |
| { |
| if (p_lcb->in_use) |
| { |
| if (p_lcb->acl_priority == L2CAP_PRIORITY_HIGH) |
| num_hipri_links++; |
| else |
| num_lowpri_links++; |
| } |
| } |
| |
| /* now adjust high priority link quota */ |
| low_quota = num_lowpri_links ? 1 : 0; |
| while ( (num_hipri_links * high_pri_link_quota + low_quota) > controller_xmit_quota ) |
| high_pri_link_quota--; |
| |
| /* Work out the xmit quota and buffer quota high and low priorities */ |
| hi_quota = num_hipri_links * high_pri_link_quota; |
| low_quota = (hi_quota < controller_xmit_quota) ? controller_xmit_quota - hi_quota : 1; |
| |
| /* Work out and save the HCI xmit quota for each low priority link */ |
| |
| /* If each low priority link cannot have at least one buffer */ |
| if (num_lowpri_links > low_quota) |
| { |
| l2cb.round_robin_quota = low_quota; |
| qq = qq_remainder = 0; |
| } |
| /* If each low priority link can have at least one buffer */ |
| else if (num_lowpri_links > 0) |
| { |
| l2cb.round_robin_quota = 0; |
| l2cb.round_robin_unacked = 0; |
| qq = low_quota / num_lowpri_links; |
| qq_remainder = low_quota % num_lowpri_links; |
| } |
| /* If no low priority link */ |
| else |
| { |
| l2cb.round_robin_quota = 0; |
| l2cb.round_robin_unacked = 0; |
| qq = qq_remainder = 0; |
| } |
| |
| L2CAP_TRACE_EVENT5 ("l2c_link_adjust_allocation num_hipri: %u num_lowpri: %u low_quota: %u round_robin_quota: %u qq: %u", |
| num_hipri_links, num_lowpri_links, low_quota, |
| l2cb.round_robin_quota, qq); |
| |
| /* Now, assign the quotas to each link */ |
| for (yy = 0, p_lcb = &l2cb.lcb_pool[0]; yy < MAX_L2CAP_LINKS; yy++, p_lcb++) |
| { |
| if (p_lcb->in_use) |
| { |
| if (p_lcb->acl_priority == L2CAP_PRIORITY_HIGH) |
| { |
| p_lcb->link_xmit_quota = high_pri_link_quota; |
| } |
| else |
| { |
| /* Safety check in case we switched to round-robin with something outstanding */ |
| /* if sent_not_acked is added into round_robin_unacked then don't add it again */ |
| /* l2cap keeps updating sent_not_acked for exiting from round robin */ |
| if (( p_lcb->link_xmit_quota > 0 )&&( qq == 0 )) |
| l2cb.round_robin_unacked += p_lcb->sent_not_acked; |
| |
| p_lcb->link_xmit_quota = qq; |
| if (qq_remainder > 0) |
| { |
| p_lcb->link_xmit_quota++; |
| qq_remainder--; |
| } |
| } |
| |
| #if L2CAP_HOST_FLOW_CTRL |
| p_lcb->link_ack_thresh = L2CAP_HOST_FC_ACL_BUFS / l2cb.num_links_active; |
| #endif |
| L2CAP_TRACE_EVENT3 ("l2c_link_adjust_allocation LCB %d Priority: %d XmitQuota: %d", |
| yy, p_lcb->acl_priority, p_lcb->link_xmit_quota); |
| |
| L2CAP_TRACE_EVENT2 (" SentNotAcked: %d RRUnacked: %d", |
| p_lcb->sent_not_acked, l2cb.round_robin_unacked); |
| |
| /* There is a special case where we have readjusted the link quotas and */ |
| /* this link may have sent anything but some other link sent packets so */ |
| /* so we may need a timer to kick off this link's transmissions. */ |
| if ( (p_lcb->link_state == LST_CONNECTED) |
| && (p_lcb->link_xmit_data_q.count) |
| && (p_lcb->sent_not_acked < p_lcb->link_xmit_quota) ) |
| btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_LINK_FLOW_CONTROL_TOUT); |
| } |
| } |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_adjust_chnl_allocation |
| ** |
| ** Description This function is called to calculate the amount of packets each |
| ** non-F&EC channel may have outstanding. |
| ** |
| ** Currently, this is a simple allocation, dividing the number |
| ** of packets allocated to the link by the number of channels. In |
| ** the future, QOS configuration should be examined. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void l2c_link_adjust_chnl_allocation (void) |
| { |
| tL2C_CCB *p_ccb; |
| UINT8 xx; |
| |
| UINT16 weighted_chnls[GKI_NUM_TOTAL_BUF_POOLS]; |
| UINT16 quota_per_weighted_chnls[GKI_NUM_TOTAL_BUF_POOLS]; |
| UINT16 reserved_buff[GKI_NUM_TOTAL_BUF_POOLS]; |
| |
| L2CAP_TRACE_DEBUG0 ("l2c_link_adjust_chnl_allocation"); |
| |
| /* initialize variables */ |
| for (xx = 0; xx < GKI_NUM_TOTAL_BUF_POOLS; xx++ ) |
| { |
| weighted_chnls[xx] = 0; |
| reserved_buff[xx] = 0; |
| } |
| |
| /* add up all of tx and rx data rate requirement */ |
| /* channel required higher data rate will get more buffer quota */ |
| for (xx = 0; xx < MAX_L2CAP_CHANNELS; xx++) |
| { |
| p_ccb = l2cb.ccb_pool + xx; |
| |
| if (!p_ccb->in_use) |
| continue; |
| |
| if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_BASIC_MODE) |
| { |
| weighted_chnls[p_ccb->ertm_info.user_tx_pool_id] += p_ccb->tx_data_rate; |
| weighted_chnls[p_ccb->ertm_info.user_rx_pool_id] += p_ccb->rx_data_rate; |
| |
| if (p_ccb->ertm_info.fcr_tx_pool_id == HCI_ACL_POOL_ID) |
| { |
| /* reserve buffers only for wait_for_ack_q to maximize throughput */ |
| /* retrans_q will work based on buffer status */ |
| reserved_buff[HCI_ACL_POOL_ID] += p_ccb->peer_cfg.fcr.tx_win_sz; |
| } |
| |
| if (p_ccb->ertm_info.fcr_rx_pool_id == HCI_ACL_POOL_ID) |
| { |
| /* reserve buffers for srej_rcv_hold_q */ |
| reserved_buff[HCI_ACL_POOL_ID] += p_ccb->peer_cfg.fcr.tx_win_sz; |
| } |
| } |
| else |
| { |
| /* low data rate is 1, medium is 2, high is 3 and no traffic is 0 */ |
| weighted_chnls[HCI_ACL_POOL_ID] += p_ccb->tx_data_rate + p_ccb->rx_data_rate; |
| } |
| } |
| |
| |
| /* get unit quota per pool */ |
| for (xx = 0; xx < GKI_NUM_TOTAL_BUF_POOLS; xx++ ) |
| { |
| if ( weighted_chnls[xx] > 0 ) |
| { |
| if (GKI_poolcount(xx) > reserved_buff[xx]) |
| quota_per_weighted_chnls[xx] = ((GKI_poolcount(xx) - reserved_buff[xx])/weighted_chnls[xx]) + 1; |
| else |
| quota_per_weighted_chnls[xx] = 1; |
| |
| L2CAP_TRACE_DEBUG5 ("POOL ID:%d, GKI_poolcount = %d, reserved_buff = %d, weighted_chnls = %d, quota_per_weighted_chnls = %d", |
| xx, GKI_poolcount(xx), reserved_buff[xx], weighted_chnls[xx], quota_per_weighted_chnls[xx] ); |
| } |
| else |
| quota_per_weighted_chnls[xx] = 0; |
| } |
| |
| |
| /* assign buffer quota to each channel based on its data rate requirement */ |
| for (xx = 0; xx < MAX_L2CAP_CHANNELS; xx++) |
| { |
| p_ccb = l2cb.ccb_pool + xx; |
| |
| if (!p_ccb->in_use) |
| continue; |
| |
| if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_BASIC_MODE) |
| { |
| p_ccb->buff_quota = quota_per_weighted_chnls[p_ccb->ertm_info.user_tx_pool_id] * p_ccb->tx_data_rate; |
| |
| L2CAP_TRACE_EVENT6 ("CID:0x%04x FCR Mode:%u UserTxPool:%u Priority:%u TxDataRate:%u Quota:%u", |
| p_ccb->local_cid, p_ccb->peer_cfg.fcr.mode, p_ccb->ertm_info.user_tx_pool_id, |
| p_ccb->ccb_priority, p_ccb->tx_data_rate, p_ccb->buff_quota); |
| |
| } |
| else |
| { |
| p_ccb->buff_quota = quota_per_weighted_chnls[HCI_ACL_POOL_ID] * p_ccb->tx_data_rate; |
| |
| L2CAP_TRACE_EVENT4 ("CID:0x%04x Priority:%u TxDataRate:%u Quota:%u", |
| p_ccb->local_cid, |
| p_ccb->ccb_priority, p_ccb->tx_data_rate, p_ccb->buff_quota); |
| } |
| |
| /* quota may be change so check congestion */ |
| l2cu_check_channel_congestion (p_ccb); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_processs_num_bufs |
| ** |
| ** Description This function is called when a "controller buffer size" |
| ** event is first received from the controller. It updates |
| ** the L2CAP values. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void l2c_link_processs_num_bufs (UINT16 num_lm_acl_bufs) |
| { |
| l2cb.num_lm_acl_bufs = l2cb.controller_xmit_window = num_lm_acl_bufs; |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_pkts_rcvd |
| ** |
| ** Description This function is called from the HCI transport when it is time |
| ** tto send a "Host ready for packets" command. This is only when |
| ** host to controller flow control is used. If fills in the arrays |
| ** of numbers of packets and handles. |
| ** |
| ** Returns count of number of entries filled in |
| ** |
| *******************************************************************************/ |
| UINT8 l2c_link_pkts_rcvd (UINT16 *num_pkts, UINT16 *handles) |
| { |
| UINT8 num_found = 0; |
| |
| #if (L2CAP_HOST_FLOW_CTRL == TRUE) |
| |
| int xx; |
| tL2C_LCB *p_lcb = &l2cb.lcb_pool[0]; |
| |
| for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++) |
| { |
| if ((p_lcb->in_use) && (p_lcb->link_pkts_unacked)) |
| { |
| num_pkts[num_found] = p_lcb->link_pkts_unacked; |
| handles[num_found] = p_lcb->handle; |
| p_lcb->link_pkts_unacked = 0; |
| num_found++; |
| } |
| } |
| #else |
| UNUSED(num_pkts); |
| UNUSED(handles); |
| #endif |
| |
| return (num_found); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_role_changed |
| ** |
| ** Description This function is called whan a link's master/slave role change |
| ** event is received. It simply updates the link control block. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void l2c_link_role_changed (BD_ADDR bd_addr, UINT8 new_role, UINT8 hci_status) |
| { |
| tL2C_LCB *p_lcb; |
| int xx; |
| |
| /* Make sure not called from HCI Command Status (bd_addr and new_role are invalid) */ |
| if (bd_addr) |
| { |
| /* If here came form hci role change event */ |
| p_lcb = l2cu_find_lcb_by_bd_addr (bd_addr); |
| if (p_lcb) |
| { |
| p_lcb->link_role = new_role; |
| |
| /* Reset high priority link if needed */ |
| if (hci_status == HCI_SUCCESS) |
| l2cu_set_acl_priority(bd_addr, p_lcb->acl_priority, TRUE); |
| } |
| } |
| |
| /* Check if any LCB was waiting for switch to be completed */ |
| for (xx = 0, p_lcb = &l2cb.lcb_pool[0]; xx < MAX_L2CAP_LINKS; xx++, p_lcb++) |
| { |
| if ((p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTING_WAIT_SWITCH)) |
| { |
| l2cu_create_conn_after_switch (p_lcb); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_pin_code_request |
| ** |
| ** Description This function is called whan a pin-code request is received |
| ** on a connection. If there are no channels active yet on the |
| ** link, it extends the link first connection timer. Make sure |
| ** that inactivity timer is not extended if PIN code happens |
| ** to be after last ccb released. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void l2c_pin_code_request (BD_ADDR bd_addr) |
| { |
| tL2C_LCB *p_lcb = l2cu_find_lcb_by_bd_addr (bd_addr); |
| |
| if ( (p_lcb) && (!p_lcb->ccb_queue.p_first_ccb) ) |
| { |
| btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_LINK_CONNECT_TOUT_EXT); |
| } |
| } |
| |
| #if ((BTM_PWR_MGR_INCLUDED == TRUE) && L2CAP_WAKE_PARKED_LINK == TRUE) |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_check_power_mode |
| ** |
| ** Description This function is called to check power mode. |
| ** |
| ** Returns TRUE if link is going to be active from park |
| ** FALSE if nothing to send or not in park mode |
| ** |
| *******************************************************************************/ |
| BOOLEAN l2c_link_check_power_mode (tL2C_LCB *p_lcb) |
| { |
| tBTM_PM_MODE mode; |
| tL2C_CCB *p_ccb; |
| BOOLEAN need_to_active = FALSE; |
| |
| /* |
| * We only switch park to active only if we have unsent packets |
| */ |
| if ( p_lcb->link_xmit_data_q.count == 0 ) |
| { |
| for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb) |
| { |
| if (p_ccb->xmit_hold_q.count != 0) |
| { |
| need_to_active = TRUE; |
| break; |
| } |
| } |
| } |
| else |
| need_to_active = TRUE; |
| |
| /* if we have packets to send */ |
| if ( need_to_active ) |
| { |
| /* check power mode */ |
| if (BTM_ReadPowerMode(p_lcb->remote_bd_addr, &mode) == BTM_SUCCESS) |
| { |
| if ( mode == BTM_PM_STS_PENDING ) |
| { |
| L2CAP_TRACE_DEBUG1 ("LCB(0x%x) is in PM pending state", p_lcb->handle); |
| |
| return TRUE; |
| } |
| } |
| } |
| return FALSE; |
| } |
| #endif /* ((BTM_PWR_MGR_INCLUDED == TRUE) && L2CAP_WAKE_PARKED_LINK == TRUE) */ |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_check_send_pkts |
| ** |
| ** Description This function is called to check if it can send packets |
| ** to the Host Controller. It may be passed the address of |
| ** a packet to send. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void l2c_link_check_send_pkts (tL2C_LCB *p_lcb, tL2C_CCB *p_ccb, BT_HDR *p_buf) |
| { |
| int xx; |
| BOOLEAN single_write = FALSE; |
| |
| /* Save the channel ID for faster counting */ |
| if (p_buf) |
| { |
| if (p_ccb != NULL) |
| { |
| p_buf->event = p_ccb->local_cid; |
| single_write = TRUE; |
| } |
| else |
| p_buf->event = 0; |
| |
| p_buf->layer_specific = 0; |
| GKI_enqueue (&p_lcb->link_xmit_data_q, p_buf); |
| |
| if (p_lcb->link_xmit_quota == 0) |
| l2cb.check_round_robin = TRUE; |
| } |
| |
| /* If this is called from uncongested callback context break recursive calling. |
| ** This LCB will be served when receiving number of completed packet event. |
| */ |
| if (l2cb.is_cong_cback_context) |
| return; |
| |
| /* If we are in a scenario where there are not enough buffers for each link to |
| ** have at least 1, then do a round-robin for all the LCBs |
| */ |
| if ( (p_lcb == NULL) || (p_lcb->link_xmit_quota == 0) ) |
| { |
| if (p_lcb == NULL) |
| p_lcb = l2cb.lcb_pool; |
| else if (!single_write) |
| p_lcb++; |
| |
| /* Loop through, starting at the next */ |
| for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++) |
| { |
| /* If controller window is full, nothing to do */ |
| if ( (l2cb.controller_xmit_window == 0 |
| #if (BLE_INCLUDED == TRUE) |
| && !p_lcb->is_ble_link |
| #endif |
| ) |
| #if (BLE_INCLUDED == TRUE) |
| || (p_lcb->is_ble_link && l2cb.controller_le_xmit_window == 0 ) |
| #endif |
| || (l2cb.round_robin_unacked >= l2cb.round_robin_quota) ) |
| break; |
| |
| /* Check for wraparound */ |
| if (p_lcb == &l2cb.lcb_pool[MAX_L2CAP_LINKS]) |
| p_lcb = &l2cb.lcb_pool[0]; |
| |
| if ( (!p_lcb->in_use) |
| || (p_lcb->partial_segment_being_sent) |
| || (p_lcb->link_state != LST_CONNECTED) |
| || (p_lcb->link_xmit_quota != 0) |
| || (L2C_LINK_CHECK_POWER_MODE (p_lcb)) ) |
| continue; |
| |
| /* See if we can send anything from the Link Queue */ |
| if ((p_buf = (BT_HDR *)GKI_dequeue (&p_lcb->link_xmit_data_q)) != NULL) |
| { |
| l2c_link_send_to_lower (p_lcb, p_buf); |
| } |
| else if (single_write) |
| { |
| /* If only doing one write, break out */ |
| break; |
| } |
| /* If nothing on the link queue, check the channel queue */ |
| else if ((p_buf = l2cu_get_next_buffer_to_send (p_lcb)) != NULL) |
| { |
| l2c_link_send_to_lower (p_lcb, p_buf); |
| } |
| } |
| |
| /* If we finished without using up our quota, no need for a safety check */ |
| #if (BLE_INCLUDED == TRUE) |
| if ( ((l2cb.controller_xmit_window > 0 && !p_lcb->is_ble_link) || |
| (l2cb.controller_le_xmit_window > 0 && p_lcb->is_ble_link)) |
| && (l2cb.round_robin_unacked < l2cb.round_robin_quota) ) |
| #else |
| if ( (l2cb.controller_xmit_window > 0) |
| && (l2cb.round_robin_unacked < l2cb.round_robin_quota) ) |
| |
| #endif |
| l2cb.check_round_robin = FALSE; |
| } |
| else /* if this is not round-robin service */ |
| { |
| /* If a partial segment is being sent, can't send anything else */ |
| if ( (p_lcb->partial_segment_being_sent) |
| || (p_lcb->link_state != LST_CONNECTED) |
| || (L2C_LINK_CHECK_POWER_MODE (p_lcb)) ) |
| return; |
| |
| /* See if we can send anything from the link queue */ |
| #if (BLE_INCLUDED == TRUE) |
| while ( ((l2cb.controller_xmit_window != 0 && !p_lcb->is_ble_link) || |
| (l2cb.controller_le_xmit_window != 0 && p_lcb->is_ble_link)) |
| && (p_lcb->sent_not_acked < p_lcb->link_xmit_quota)) |
| #else |
| while ( (l2cb.controller_xmit_window != 0) |
| && (p_lcb->sent_not_acked < p_lcb->link_xmit_quota)) |
| #endif |
| { |
| if ((p_buf = (BT_HDR *)GKI_dequeue (&p_lcb->link_xmit_data_q)) == NULL) |
| break; |
| |
| if (!l2c_link_send_to_lower (p_lcb, p_buf)) |
| break; |
| } |
| |
| if (!single_write) |
| { |
| /* See if we can send anything for any channel */ |
| #if (BLE_INCLUDED == TRUE) |
| while ( ((l2cb.controller_xmit_window != 0 && !p_lcb->is_ble_link) || |
| (l2cb.controller_le_xmit_window != 0 && p_lcb->is_ble_link)) |
| && (p_lcb->sent_not_acked < p_lcb->link_xmit_quota)) |
| #else |
| while ((l2cb.controller_xmit_window != 0) && (p_lcb->sent_not_acked < p_lcb->link_xmit_quota)) |
| #endif |
| { |
| if ((p_buf = l2cu_get_next_buffer_to_send (p_lcb)) == NULL) |
| break; |
| |
| if (!l2c_link_send_to_lower (p_lcb, p_buf)) |
| break; |
| } |
| } |
| |
| /* There is a special case where we have readjusted the link quotas and */ |
| /* this link may have sent anything but some other link sent packets so */ |
| /* so we may need a timer to kick off this link's transmissions. */ |
| if ( (p_lcb->link_xmit_data_q.count) && (p_lcb->sent_not_acked < p_lcb->link_xmit_quota) ) |
| btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_LINK_FLOW_CONTROL_TOUT); |
| } |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_send_to_lower |
| ** |
| ** Description This function queues the buffer for HCI transmission |
| ** |
| ** Returns TRUE for success, FALSE for fail |
| ** |
| *******************************************************************************/ |
| static BOOLEAN l2c_link_send_to_lower (tL2C_LCB *p_lcb, BT_HDR *p_buf) |
| { |
| UINT16 num_segs; |
| UINT16 xmit_window, acl_data_size; |
| |
| #if (BLE_INCLUDED == TRUE) |
| if ((!p_lcb->is_ble_link && (p_buf->len <= btu_cb.hcit_acl_pkt_size)) || |
| (p_lcb->is_ble_link && (p_buf->len <= btu_cb.hcit_ble_acl_pkt_size))) |
| #else |
| if (p_buf->len <= btu_cb.hcit_acl_pkt_size) |
| #endif |
| { |
| if (p_lcb->link_xmit_quota == 0) |
| l2cb.round_robin_unacked++; |
| |
| p_lcb->sent_not_acked++; |
| p_buf->layer_specific = 0; |
| |
| #if (BLE_INCLUDED == TRUE) |
| if (p_lcb->is_ble_link) |
| { |
| l2cb.controller_le_xmit_window--; |
| L2C_LINK_SEND_BLE_ACL_DATA (p_buf); |
| } |
| else |
| #endif |
| { |
| l2cb.controller_xmit_window--; |
| L2C_LINK_SEND_ACL_DATA (p_buf); |
| } |
| } |
| else |
| { |
| #if BLE_INCLUDED == TRUE |
| if (p_lcb->is_ble_link) |
| { |
| acl_data_size = btu_cb.hcit_ble_acl_data_size; |
| xmit_window = l2cb.controller_le_xmit_window; |
| |
| } |
| else |
| #endif |
| { |
| acl_data_size = btu_cb.hcit_acl_data_size; |
| xmit_window = l2cb.controller_xmit_window; |
| } |
| num_segs = (p_buf->len - HCI_DATA_PREAMBLE_SIZE + acl_data_size - 1) / acl_data_size; |
| |
| |
| /* If doing round-robin, then only 1 segment each time */ |
| if (p_lcb->link_xmit_quota == 0) |
| { |
| num_segs = 1; |
| p_lcb->partial_segment_being_sent = TRUE; |
| } |
| else |
| { |
| /* Multi-segment packet. Make sure it can fit */ |
| if (num_segs > xmit_window) |
| { |
| num_segs = xmit_window; |
| p_lcb->partial_segment_being_sent = TRUE; |
| } |
| |
| if (num_segs > (p_lcb->link_xmit_quota - p_lcb->sent_not_acked)) |
| { |
| num_segs = (p_lcb->link_xmit_quota - p_lcb->sent_not_acked); |
| p_lcb->partial_segment_being_sent = TRUE; |
| } |
| } |
| |
| p_buf->layer_specific = num_segs; |
| #if BLE_INCLUDED == TRUE |
| if (p_lcb->is_ble_link) |
| { |
| l2cb.controller_le_xmit_window -= num_segs; |
| |
| } |
| else |
| #endif |
| l2cb.controller_xmit_window -= num_segs; |
| |
| if (p_lcb->link_xmit_quota == 0) |
| l2cb.round_robin_unacked += num_segs; |
| |
| p_lcb->sent_not_acked += num_segs; |
| #if BLE_INCLUDED == TRUE |
| if (p_lcb->is_ble_link) |
| { |
| L2C_LINK_SEND_BLE_ACL_DATA(p_buf); |
| } |
| else |
| #endif |
| { |
| L2C_LINK_SEND_ACL_DATA (p_buf); |
| } |
| } |
| |
| #if (L2CAP_HCI_FLOW_CONTROL_DEBUG == TRUE) |
| #if (BLE_INCLUDED == TRUE) |
| if (p_lcb->is_ble_link) |
| { |
| L2CAP_TRACE_DEBUG6 ("TotalWin=%d,Hndl=0x%x,Quota=%d,Unack=%d,RRQuota=%d,RRUnack=%d", |
| l2cb.controller_le_xmit_window, |
| p_lcb->handle, |
| p_lcb->link_xmit_quota, p_lcb->sent_not_acked, |
| l2cb.round_robin_quota, l2cb.round_robin_unacked); |
| } |
| else |
| #endif |
| { |
| L2CAP_TRACE_DEBUG6 ("TotalWin=%d,Hndl=0x%x,Quota=%d,Unack=%d,RRQuota=%d,RRUnack=%d", |
| l2cb.controller_xmit_window, |
| p_lcb->handle, |
| p_lcb->link_xmit_quota, p_lcb->sent_not_acked, |
| l2cb.round_robin_quota, l2cb.round_robin_unacked); |
| } |
| #endif |
| |
| return TRUE; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_process_num_completed_pkts |
| ** |
| ** Description This function is called when a "number-of-completed-packets" |
| ** event is received from the controller. It updates all the |
| ** LCB transmit counts. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void l2c_link_process_num_completed_pkts (UINT8 *p) |
| { |
| UINT8 num_handles, xx; |
| UINT16 handle; |
| UINT16 num_sent; |
| tL2C_LCB *p_lcb; |
| |
| STREAM_TO_UINT8 (num_handles, p); |
| |
| for (xx = 0; xx < num_handles; xx++) |
| { |
| STREAM_TO_UINT16 (handle, p); |
| STREAM_TO_UINT16 (num_sent, p); |
| |
| p_lcb = l2cu_find_lcb_by_handle (handle); |
| |
| /* Callback for number of completed packet event */ |
| /* Originally designed for [3DSG] */ |
| if((p_lcb != NULL) && (p_lcb->p_nocp_cb)) |
| { |
| L2CAP_TRACE_DEBUG0 ("L2CAP - calling NoCP callback"); |
| (*p_lcb->p_nocp_cb)(p_lcb->remote_bd_addr); |
| } |
| |
| if (p_lcb) |
| { |
| #if (BLE_INCLUDED == TRUE) |
| if (p_lcb->is_ble_link) |
| { |
| l2cb.controller_le_xmit_window += num_sent; |
| } |
| else |
| #endif |
| { |
| /* Maintain the total window to the controller */ |
| l2cb.controller_xmit_window += num_sent; |
| } |
| /* If doing round-robin, adjust communal counts */ |
| if (p_lcb->link_xmit_quota == 0) |
| { |
| /* Don't go negative */ |
| if (l2cb.round_robin_unacked > num_sent) |
| l2cb.round_robin_unacked -= num_sent; |
| else |
| l2cb.round_robin_unacked = 0; |
| } |
| |
| /* Don't go negative */ |
| if (p_lcb->sent_not_acked > num_sent) |
| p_lcb->sent_not_acked -= num_sent; |
| else |
| p_lcb->sent_not_acked = 0; |
| |
| l2c_link_check_send_pkts (p_lcb, NULL, NULL); |
| |
| /* If we were doing round-robin for low priority links, check 'em */ |
| if ( (p_lcb->acl_priority == L2CAP_PRIORITY_HIGH) |
| && (l2cb.check_round_robin) |
| && (l2cb.round_robin_unacked < l2cb.round_robin_quota) ) |
| { |
| l2c_link_check_send_pkts (NULL, NULL, NULL); |
| } |
| } |
| |
| #if (L2CAP_HCI_FLOW_CONTROL_DEBUG == TRUE) |
| if (p_lcb) |
| { |
| #if (BLE_INCLUDED == TRUE) |
| if (p_lcb->is_ble_link) |
| { |
| L2CAP_TRACE_DEBUG5 ("TotalWin=%d,LinkUnack(0x%x)=%d,RRCheck=%d,RRUnack=%d", |
| l2cb.controller_le_xmit_window, |
| p_lcb->handle, p_lcb->sent_not_acked, |
| l2cb.check_round_robin, l2cb.round_robin_unacked); |
| } |
| else |
| #endif |
| { |
| L2CAP_TRACE_DEBUG5 ("TotalWin=%d,LinkUnack(0x%x)=%d,RRCheck=%d,RRUnack=%d", |
| l2cb.controller_xmit_window, |
| p_lcb->handle, p_lcb->sent_not_acked, |
| l2cb.check_round_robin, l2cb.round_robin_unacked); |
| |
| } |
| } |
| else |
| { |
| #if (BLE_INCLUDED == TRUE) |
| L2CAP_TRACE_DEBUG5 ("TotalWin=%d LE_Win: %d, Handle=0x%x, RRCheck=%d, RRUnack=%d", |
| l2cb.controller_xmit_window, |
| l2cb.controller_le_xmit_window, |
| handle, |
| l2cb.check_round_robin, l2cb.round_robin_unacked); |
| #else |
| L2CAP_TRACE_DEBUG4 ("TotalWin=%d Handle=0x%x RRCheck=%d RRUnack=%d", |
| l2cb.controller_xmit_window, |
| handle, |
| l2cb.check_round_robin, l2cb.round_robin_unacked); |
| #endif |
| } |
| #endif |
| } |
| |
| #if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE) |
| /* only full stack can enable sleep mode */ |
| btu_check_bt_sleep (); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function l2cap_link_chk_pkt_start |
| ** |
| ** Description This function is called from the HCI transport when the first |
| ** 4 bytes of an HCI ACL packet have been received. It checks if the |
| ** packet is the next segment of a fragmented L2CAP message. If it |
| ** is, and the length is OK, it returns the address of the |
| ** starting L2CAP message segment buffer. |
| ** |
| ** Returns the address of the receive buffer HCIT should use |
| ** (CR419: Modified to return NULL in case of error.) |
| ** |
| ** NOTE This assumes that the L2CAP MTU size is less than the size |
| ** of an HCI ACL buffer, so the maximum L2CAP message will fit |
| ** into one buffer. |
| ** |
| *******************************************************************************/ |
| BT_HDR *l2cap_link_chk_pkt_start (BT_HDR *p_cur_buf) |
| { |
| UINT8 *p; |
| UINT16 handle; |
| UINT16 hci_len; |
| UINT16 pkt_type; |
| tL2C_LCB *p_lcb; |
| BT_HDR * p_return_buf; /* CR419: To avoid returning from too many places */ |
| |
| |
| if (p_cur_buf) |
| { |
| p = (UINT8 *)(p_cur_buf + 1) + p_cur_buf->offset; |
| } |
| else |
| { |
| return (NULL); |
| } |
| |
| /* L2CAP expects all rcvd packets to have a layer-specific value of 0 */ |
| p_cur_buf->layer_specific = 0; |
| |
| STREAM_TO_UINT16 (handle, p); |
| STREAM_TO_UINT16 (hci_len, p); |
| |
| pkt_type = HCID_GET_EVENT (handle); |
| handle = HCID_GET_HANDLE (handle); |
| |
| l2cb.p_cur_hcit_lcb = NULL; |
| |
| /* Find the link that is associated with this handle */ |
| p_lcb = l2cu_find_lcb_by_handle (handle); |
| |
| /* If no link for this handle, nothing to do. */ |
| if (!p_lcb) |
| return (p_cur_buf) ; |
| |
| if (pkt_type == L2CAP_PKT_START) /*** START PACKET ***/ |
| { |
| /* Start of packet. If we were in the middle of receiving */ |
| /* a packet, it is incomplete. Drop it. */ |
| if (p_lcb->p_hcit_rcv_acl) |
| { |
| L2CAP_TRACE_WARNING0 ("L2CAP - dropping incomplete pkt"); |
| GKI_freebuf (p_lcb->p_hcit_rcv_acl); |
| p_lcb->p_hcit_rcv_acl = NULL; |
| } |
| |
| /* Save the active buffer address in the LCB */ |
| if ((p_return_buf = p_cur_buf) != NULL) |
| { |
| p_lcb->p_hcit_rcv_acl = p_return_buf; |
| l2cb.p_cur_hcit_lcb = p_lcb; |
| } |
| } |
| else /*** CONTINUATION PACKET ***/ |
| { |
| /* Packet continuation. Check if we were expecting it */ |
| if (p_lcb->p_hcit_rcv_acl) |
| { |
| UINT16 total_len; |
| BT_HDR *p_base_buf = p_lcb->p_hcit_rcv_acl; |
| UINT8 *p_f = (UINT8 *)(p_base_buf + 1) + p_base_buf->offset + 2; |
| |
| STREAM_TO_UINT16 (total_len, p_f); |
| |
| /* We were expecting the CONTINUATION packet. If length fits, it can go in the */ |
| /* current buffer. */ |
| if ((total_len + hci_len) <= (L2CAP_MTU_SIZE + HCI_DATA_PREAMBLE_SIZE)) |
| { |
| /* GKI_freebuf (p_cur_buf); CR419:Do not free it yet */ |
| p_return_buf = p_lcb->p_hcit_rcv_acl; /* CR419: return base buffer */ |
| l2cb.p_cur_hcit_lcb = p_lcb; |
| |
| if ((p_cur_buf->len > HCI_DATA_PREAMBLE_SIZE)) |
| { |
| UINT8 * p = (UINT8 *)(p_cur_buf + 1) |
| + p_cur_buf->offset |
| + HCI_DATA_PREAMBLE_SIZE; |
| UINT8 * p1 = (UINT8 *)(p_return_buf + 1) |
| + p_return_buf->offset |
| + p_return_buf->len; |
| |
| /* Copy data from new buffer into base buffer then update the data */ |
| /* count in the base buffer accordingly. */ |
| memcpy (p1, p, p_cur_buf->len - HCI_DATA_PREAMBLE_SIZE); |
| p_return_buf->len += (p_cur_buf->len - HCI_DATA_PREAMBLE_SIZE); |
| } |
| |
| GKI_freebuf (p_cur_buf); |
| p_cur_buf = NULL; |
| |
| /* Update HCI header of first segment (base buffer) with new length */ |
| total_len += hci_len; |
| p_f = (UINT8 *)(p_base_buf + 1) + p_base_buf->offset + 2; |
| UINT16_TO_STREAM (p_f, total_len); |
| } |
| else |
| { |
| /* Packet too long. Drop the base packet */ |
| L2CAP_TRACE_WARNING3 ("L2CAP - dropping too long pkt BufLen: %d total_len: %d hci_len: %d", |
| p_lcb->p_hcit_rcv_acl->len, total_len, hci_len); |
| |
| GKI_freebuf (p_lcb->p_hcit_rcv_acl); |
| p_lcb->p_hcit_rcv_acl = NULL; |
| p_return_buf = NULL ; /* Can't hold onto it any more */ |
| } |
| } |
| else /*** NEITHER START OR CONTINUATION PACKET ***/ |
| { |
| p_return_buf = NULL ; |
| } |
| } |
| |
| if (p_return_buf == NULL) /* if error is indicated.. */ |
| { |
| if (p_cur_buf != NULL) /* ..drop input buffer */ |
| GKI_freebuf(p_cur_buf); /* (if present) */ |
| } |
| |
| return (p_return_buf); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function l2cap_link_chk_pkt_end |
| ** |
| ** Description This function is called from the HCI transport when the last |
| ** byte of an HCI ACL packet has been received. It checks if the |
| ** L2CAP message is complete, i.e. no more continuation packets |
| ** are expected. |
| ** |
| ** Returns TRUE if message complete, FALSE if continuation expected |
| ** |
| *******************************************************************************/ |
| BOOLEAN l2cap_link_chk_pkt_end (void) |
| { |
| UINT8 *p; |
| BT_HDR *p_buf; |
| UINT16 l2cap_len; |
| tL2C_LCB *p_lcb; |
| |
| /* If link or buffer pointer not set up, let main line handle it */ |
| if (((p_lcb = l2cb.p_cur_hcit_lcb) == NULL) || ((p_buf = p_lcb->p_hcit_rcv_acl) == NULL)) |
| return (TRUE); |
| |
| /* Point to the L2CAP length */ |
| p = (UINT8 *)(p_buf + 1) + p_buf->offset + HCI_DATA_PREAMBLE_SIZE; |
| |
| STREAM_TO_UINT16 (l2cap_len, p); |
| |
| /* If the L2CAP length has not been reached, tell HCIT not to send this buffer to BTU */ |
| if (l2cap_len > (p_buf->len - (HCI_DATA_PREAMBLE_SIZE + L2CAP_PKT_OVERHEAD))) |
| { |
| return (FALSE); |
| } |
| else |
| { |
| p_lcb->p_hcit_rcv_acl = NULL; |
| return (TRUE); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function l2c_link_segments_xmitted |
| ** |
| ** Description This function is called from the HCI Interface when an ACL |
| ** data packet segment is transmitted. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void l2c_link_segments_xmitted (BT_HDR *p_msg) |
| { |
| UINT8 *p = (UINT8 *)(p_msg + 1) + p_msg->offset; |
| UINT16 handle; |
| tL2C_LCB *p_lcb; |
| |
| /* Extract the handle */ |
| STREAM_TO_UINT16 (handle, p); |
| handle = HCID_GET_HANDLE (handle); |
| |
| /* Find the LCB based on the handle */ |
| if ((p_lcb = l2cu_find_lcb_by_handle (handle)) == NULL) |
| { |
| L2CAP_TRACE_WARNING1 ("L2CAP - rcvd segment complete, unknown handle: %d", handle); |
| GKI_freebuf (p_msg); |
| return; |
| } |
| |
| if (p_lcb->link_state == LST_CONNECTED) |
| { |
| /* Enqueue the buffer to the head of the transmit queue, and see */ |
| /* if we can transmit anything more. */ |
| GKI_enqueue_head (&p_lcb->link_xmit_data_q, p_msg); |
| |
| p_lcb->partial_segment_being_sent = FALSE; |
| |
| l2c_link_check_send_pkts (p_lcb, NULL, NULL); |
| } |
| else |
| GKI_freebuf (p_msg); |
| } |