add support for custom sniff configuration
This change allows the bta_dm_pm_md table defined in bta_dm_cfg.c
to be overridden in bdroid_buildcfg.h
This also changes how the bta_dm_pm_spec table references sniff
parameters in the bta_dm_pm_md. Indexing into the bta_dm_pm_md
table is now through an overrideable define instead of directly
referencing the index into the table.
Lastly this change allows for overriding the open, active, and
idle states of the HID host power table indepednent of the HID
device power table.
Bug: 13329024
Change-Id: If1eea95ebdd3efd48c69bf4cc6f2ffe06219c80b
Signed-off-by: Adam Hampson <ahampson@google.com>
diff --git a/bta/include/bta_api.h b/bta/include/bta_api.h
index 2ad6a98..4bb305d 100644
--- a/bta/include/bta_api.h
+++ b/bta/include/bta_api.h
@@ -1065,6 +1065,96 @@
#define BTA_DM_PM_PARK_IDX 5 /* the actual index to bta_dm_pm_md[] for PARK mode */
#endif
+#ifndef BTA_DM_PM_SNIFF_A2DP_IDX
+#define BTA_DM_PM_SNIFF_A2DP_IDX BTA_DM_PM_SNIFF
+#endif
+
+#ifndef BTA_DM_PM_SNIFF_HD_IDLE_IDX
+#define BTA_DM_PM_SNIFF_HD_IDLE_IDX BTA_DM_PM_SNIFF2
+#endif
+
+#ifndef BTA_DM_PM_SNIFF_SCO_OPEN_IDX
+#define BTA_DM_PM_SNIFF_SCO_OPEN_IDX BTA_DM_PM_SNIFF3
+#endif
+
+#ifndef BTA_DM_PM_SNIFF_HD_ACTIVE_IDX
+#define BTA_DM_PM_SNIFF_HD_ACTIVE_IDX BTA_DM_PM_SNIFF4
+#endif
+
+#ifndef BTA_DM_PM_SNIFF_HH_OPEN_IDX
+#define BTA_DM_PM_SNIFF_HH_OPEN_IDX BTA_DM_PM_SNIFF2
+#endif
+
+#ifndef BTA_DM_PM_SNIFF_HH_ACTIVE_IDX
+#define BTA_DM_PM_SNIFF_HH_ACTIVE_IDX BTA_DM_PM_SNIFF2
+#endif
+
+#ifndef BTA_DM_PM_SNIFF_HH_IDLE_IDX
+#define BTA_DM_PM_SNIFF_HH_IDLE_IDX BTA_DM_PM_SNIFF2
+#endif
+
+
+#ifndef BTA_DM_PM_HH_OPEN_DELAY
+#define BTA_DM_PM_HH_OPEN_DELAY 30000
+#endif
+
+#ifndef BTA_DM_PM_HH_ACTIVE_DELAY
+#define BTA_DM_PM_HH_ACTIVE_DELAY 30000
+#endif
+
+#ifndef BTA_DM_PM_HH_IDLE_DELAY
+#define BTA_DM_PM_HH_IDLE_DELAY 30000
+#endif
+
+/* The Sniff Parameters defined below must be ordered from highest
+ * latency (biggest interval) to lowest latency. If there is a conflict
+ * among the connected services the setting with the lowest latency will
+ * be selected. If a device should override a sniff parameter then it
+ * must insure that order is maintained.
+ */
+#ifndef BTA_DM_PM_SNIFF_MAX
+#define BTA_DM_PM_SNIFF_MAX 800
+#define BTA_DM_PM_SNIFF_MIN 400
+#define BTA_DM_PM_SNIFF_ATTEMPT 4
+#define BTA_DM_PM_SNIFF_TIMEOUT 1
+#endif
+
+#ifndef BTA_DM_PM_SNIFF1_MAX
+#define BTA_DM_PM_SNIFF1_MAX 400
+#define BTA_DM_PM_SNIFF1_MIN 200
+#define BTA_DM_PM_SNIFF1_ATTEMPT 4
+#define BTA_DM_PM_SNIFF1_TIMEOUT 1
+#endif
+
+#ifndef BTA_DM_PM_SNIFF2_MAX
+#define BTA_DM_PM_SNIFF2_MAX 180
+#define BTA_DM_PM_SNIFF2_MIN 150
+#define BTA_DM_PM_SNIFF2_ATTEMPT 4
+#define BTA_DM_PM_SNIFF2_TIMEOUT 1
+#endif
+
+#ifndef BTA_DM_PM_SNIFF3_MAX
+#define BTA_DM_PM_SNIFF3_MAX 150
+#define BTA_DM_PM_SNIFF3_MIN 50
+#define BTA_DM_PM_SNIFF3_ATTEMPT 4
+#define BTA_DM_PM_SNIFF3_TIMEOUT 1
+#endif
+
+#ifndef BTA_DM_PM_SNIFF4_MAX
+#define BTA_DM_PM_SNIFF4_MAX 54
+#define BTA_DM_PM_SNIFF4_MIN 30
+#define BTA_DM_PM_SNIFF4_ATTEMPT 4
+#define BTA_DM_PM_SNIFF4_TIMEOUT 1
+#endif
+
+#ifndef BTA_DM_PM_PARK_MAX
+#define BTA_DM_PM_PARK_MAX 800
+#define BTA_DM_PM_PARK_MIN 400
+#define BTA_DM_PM_PARK_ATTEMPT 0
+#define BTA_DM_PM_PARK_TIMEOUT 0
+#endif
+
+
/* Switch callback events */
#define BTA_DM_SWITCH_CMPL_EVT 0 /* Completion of the Switch API */