| /****************************************************************************** |
| * |
| * Copyright (C) 2006-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This is the interface file for device mananger callout functions. |
| * |
| ******************************************************************************/ |
| #ifndef BTA_DM_CO_H |
| #define BTA_DM_CO_H |
| |
| #include "bta_sys.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #ifndef BTA_SCO_OUT_PKT_SIZE |
| #define BTA_SCO_OUT_PKT_SIZE BTM_SCO_DATA_SIZE_MAX |
| #endif |
| |
| #define BTA_SCO_CODEC_PCM 0 /* used for regular SCO */ |
| #define BTA_SCO_CODEC_SBC 1 /* used for WBS */ |
| typedef uint8_t tBTA_SCO_CODEC_TYPE; |
| |
| #define BTA_DM_SCO_SAMP_RATE_8K 8000 |
| #define BTA_DM_SCO_SAMP_RATE_16K 16000 |
| |
| /* SCO codec information */ |
| typedef struct |
| { |
| tBTA_SCO_CODEC_TYPE codec_type; |
| }tBTA_CODEC_INFO; |
| |
| #define BTA_DM_SCO_ROUTE_PCM BTM_SCO_ROUTE_PCM |
| #define BTA_DM_SCO_ROUTE_HCI BTM_SCO_ROUTE_HCI |
| |
| typedef tBTM_SCO_ROUTE_TYPE tBTA_DM_SCO_ROUTE_TYPE; |
| |
| |
| /***************************************************************************** |
| * Function Declarations |
| ****************************************************************************/ |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_io_req |
| * |
| * Description This callout function is executed by DM to get IO capabilities |
| * of the local device for the Simple Pairing process |
| * |
| * Parameters bd_addr - The peer device |
| * *p_io_cap - The local Input/Output capabilities |
| * *p_oob_data - true, if OOB data is available for the peer device. |
| * *p_auth_req - true, if MITM protection is required. |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap, |
| tBTA_OOB_DATA *p_oob_data, tBTA_AUTH_REQ *p_auth_req, |
| bool is_orig); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_io_rsp |
| * |
| * Description This callout function is executed by DM to report IO capabilities |
| * of the peer device for the Simple Pairing process |
| * |
| * Parameters bd_addr - The peer device |
| * io_cap - The remote Input/Output capabilities |
| * oob_data - true, if OOB data is available for the peer device. |
| * auth_req - true, if MITM protection is required. |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_io_rsp(BD_ADDR bd_addr, tBTA_IO_CAP io_cap, |
| tBTA_OOB_DATA oob_data, tBTA_AUTH_REQ auth_req); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_lk_upgrade |
| * |
| * Description This callout function is executed by DM to check if the |
| * platform wants allow link key upgrade |
| * |
| * Parameters bd_addr - The peer device |
| * *p_upgrade - true, if link key upgrade is desired. |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_lk_upgrade(BD_ADDR bd_addr, bool *p_upgrade ); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_loc_oob |
| * |
| * Description This callout function is executed by DM to report the OOB |
| * data of the local device for the Simple Pairing process |
| * |
| * Parameters valid - true, if the local OOB data is retrieved from LM |
| * c - Simple Pairing Hash C |
| * r - Simple Pairing Randomnizer R |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_loc_oob(bool valid, BT_OCTET16 c, BT_OCTET16 r); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_rmt_oob |
| * |
| * Description This callout function is executed by DM to request the OOB |
| * data for the remote device for the Simple Pairing process |
| * |
| * Parameters bd_addr - The peer device |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_rmt_oob(BD_ADDR bd_addr); |
| |
| /***************************************************************************** |
| * SCO over HCI Function Declarations |
| ****************************************************************************/ |
| /******************************************************************************* |
| * |
| * Function bta_dm_sco_co_init |
| * |
| * Description This function can be used by the phone to initialize audio |
| * codec or for other initialization purposes before SCO connection |
| * is opened. |
| * |
| * |
| * Returns Void. |
| * |
| ******************************************************************************/ |
| extern tBTA_DM_SCO_ROUTE_TYPE bta_dm_sco_co_init(uint32_t rx_bw, uint32_t tx_bw, |
| tBTA_CODEC_INFO *p_codec_info, uint8_t app_id); |
| |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_sco_co_open |
| * |
| * Description This function is executed when a SCO connection is open. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void bta_dm_sco_co_open(uint16_t handle, uint8_t pkt_size, uint16_t event); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_sco_co_close |
| * |
| * Description This function is called when a SCO connection is closed |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void bta_dm_sco_co_close(void); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_sco_co_out_data |
| * |
| * Description This function is called to send SCO data over HCI. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void bta_dm_sco_co_out_data(BT_HDR **p_buf); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_sco_co_in_data |
| * |
| * Description This function is called to send incoming SCO data to application. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void bta_dm_sco_co_in_data(BT_HDR *p_buf, tBTM_SCO_DATA_FLAG status); |
| |
| |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_ble_io_req |
| * |
| * Description This callout function is executed by DM to get BLE IO capabilities |
| * before SMP pairing gets going. |
| * |
| * Parameters bd_addr - The peer device |
| * *p_io_cap - The local Input/Output capabilities |
| * *p_oob_data - true, if OOB data is available for the peer device. |
| * *p_auth_req - Auth request setting (Bonding and MITM required or not) |
| * *p_max_key_size - max key size local device supported. |
| * *p_init_key - initiator keys. |
| * *p_resp_key - responder keys. |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_ble_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap, |
| tBTA_OOB_DATA *p_oob_data, |
| tBTA_LE_AUTH_REQ *p_auth_req, |
| uint8_t *p_max_key_size, |
| tBTA_LE_KEY_TYPE *p_init_key, |
| tBTA_LE_KEY_TYPE *p_resp_key ); |
| |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_ble_local_key_reload |
| * |
| * Description This callout function is to load the local BLE keys if available |
| * on the device. |
| * |
| * Parameters none |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_ble_load_local_keys (tBTA_DM_BLE_LOCAL_KEY_MASK *p_key_mask, BT_OCTET16 er, |
| tBTA_BLE_LOCAL_ID_KEYS *p_id_keys); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_ble_io_req |
| * |
| * Description This callout function is executed by DM to get BLE IO capabilities |
| * before SMP pairing gets going. |
| * |
| * Parameters bd_addr - The peer device |
| * *p_io_cap - The local Input/Output capabilities |
| * *p_oob_data - true, if OOB data is available for the peer device. |
| * *p_auth_req - Auth request setting (Bonding and MITM required or not) |
| * *p_max_key_size - max key size local device supported. |
| * *p_init_key - initiator keys. |
| * *p_resp_key - responder keys. |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_ble_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap, |
| tBTA_OOB_DATA *p_oob_data, |
| tBTA_LE_AUTH_REQ *p_auth_req, |
| uint8_t *p_max_key_size, |
| tBTA_LE_KEY_TYPE *p_init_key, |
| tBTA_LE_KEY_TYPE *p_resp_key ); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* BTA_DM_CO_H */ |