| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains functions for BLE controller based privacy. |
| * |
| ******************************************************************************/ |
| #include <string.h> |
| #include "bt_target.h" |
| |
| #if (BLE_PRIVACY_SPT == TRUE) |
| #include "bt_types.h" |
| #include "btm_int.h" |
| #include "btu.h" |
| #include "device/include/controller.h" |
| #include "hcimsgs.h" |
| #include "vendor_hcidefs.h" |
| |
| /* RPA offload VSC specifics */ |
| #define BTM_BLE_META_IRK_ENABLE 0x01 |
| #define BTM_BLE_META_ADD_IRK_ENTRY 0x02 |
| #define BTM_BLE_META_REMOVE_IRK_ENTRY 0x03 |
| #define BTM_BLE_META_CLEAR_IRK_LIST 0x04 |
| #define BTM_BLE_META_READ_IRK_ENTRY 0x05 |
| #define BTM_BLE_META_CS_RESOLVE_ADDR 0x00000001 |
| #define BTM_BLE_IRK_ENABLE_LEN 2 |
| |
| #define BTM_BLE_META_ADD_IRK_LEN 24 |
| #define BTM_BLE_META_REMOVE_IRK_LEN 8 |
| #define BTM_BLE_META_CLEAR_IRK_LEN 1 |
| #define BTM_BLE_META_READ_IRK_LEN 2 |
| #define BTM_BLE_META_ADD_WL_ATTR_LEN 9 |
| |
| /******************************************************************************* |
| * Functions implemented controller based privacy using Resolving List |
| ******************************************************************************/ |
| /******************************************************************************* |
| * |
| * Function btm_ble_enq_resolving_list_pending |
| * |
| * Description add target address into resolving pending operation queue |
| * |
| * Parameters target_bda: target device address |
| * add_entry: true for add entry, false for remove entry |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_ble_enq_resolving_list_pending(const RawAddress& pseudo_bda, |
| uint8_t op_code) { |
| tBTM_BLE_RESOLVE_Q* p_q = &btm_cb.ble_ctr_cb.resolving_list_pend_q; |
| |
| p_q->resolve_q_random_pseudo[p_q->q_next] = pseudo_bda; |
| p_q->resolve_q_action[p_q->q_next] = op_code; |
| p_q->q_next++; |
| p_q->q_next %= controller_get_interface()->get_ble_resolving_list_max_size(); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_brcm_find_resolving_pending_entry |
| * |
| * Description check to see if the action is in pending list |
| * |
| * Parameters true: action pending; |
| * false: new action |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| bool btm_ble_brcm_find_resolving_pending_entry(const RawAddress& pseudo_addr, |
| uint8_t action) { |
| tBTM_BLE_RESOLVE_Q* p_q = &btm_cb.ble_ctr_cb.resolving_list_pend_q; |
| |
| for (uint8_t i = p_q->q_pending; i != p_q->q_next;) { |
| if (p_q->resolve_q_random_pseudo[i] == pseudo_addr && |
| action == p_q->resolve_q_action[i]) |
| return true; |
| |
| i++; |
| i %= controller_get_interface()->get_ble_resolving_list_max_size(); |
| } |
| return false; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_deq_resolving_pending |
| * |
| * Description dequeue target address from resolving pending operation |
| * queue |
| * |
| * Parameters pseudo_addr: pseudo_addr device address |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| bool btm_ble_deq_resolving_pending(RawAddress& pseudo_addr) { |
| tBTM_BLE_RESOLVE_Q* p_q = &btm_cb.ble_ctr_cb.resolving_list_pend_q; |
| |
| if (p_q->q_next != p_q->q_pending) { |
| pseudo_addr = p_q->resolve_q_random_pseudo[p_q->q_pending]; |
| p_q->resolve_q_random_pseudo[p_q->q_pending] = bd_addr_empty; |
| p_q->q_pending++; |
| p_q->q_pending %= |
| controller_get_interface()->get_ble_resolving_list_max_size(); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_clear_irk_index |
| * |
| * Description clear IRK list index mask for availability |
| * |
| * Returns none |
| * |
| ******************************************************************************/ |
| void btm_ble_clear_irk_index(uint8_t index) { |
| uint8_t byte; |
| uint8_t bit; |
| |
| if (index < controller_get_interface()->get_ble_resolving_list_max_size()) { |
| byte = index / 8; |
| bit = index % 8; |
| btm_cb.ble_ctr_cb.irk_list_mask[byte] &= (~(1 << bit)); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_find_irk_index |
| * |
| * Description find the first available IRK list index |
| * |
| * Returns index from 0 ~ max (127 default) |
| * |
| ******************************************************************************/ |
| uint8_t btm_ble_find_irk_index(void) { |
| uint8_t i = 0; |
| uint8_t byte; |
| uint8_t bit; |
| |
| while (i < controller_get_interface()->get_ble_resolving_list_max_size()) { |
| byte = i / 8; |
| bit = i % 8; |
| |
| if ((btm_cb.ble_ctr_cb.irk_list_mask[byte] & (1 << bit)) == 0) { |
| btm_cb.ble_ctr_cb.irk_list_mask[byte] |= (1 << bit); |
| return i; |
| } |
| i++; |
| } |
| |
| BTM_TRACE_ERROR("%s failed, list full", __func__); |
| return i; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_update_resolving_list |
| * |
| * Description update resolving list entry in host maintained record |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_ble_update_resolving_list(const RawAddress& pseudo_bda, bool add) { |
| tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev(pseudo_bda); |
| if (p_dev_rec == NULL) return; |
| |
| if (add) { |
| p_dev_rec->ble.in_controller_list |= BTM_RESOLVING_LIST_BIT; |
| if (!controller_get_interface()->supports_ble_privacy()) |
| p_dev_rec->ble.resolving_list_index = btm_ble_find_irk_index(); |
| } else { |
| p_dev_rec->ble.in_controller_list &= ~BTM_RESOLVING_LIST_BIT; |
| if (!controller_get_interface()->supports_ble_privacy()) { |
| /* clear IRK list index mask */ |
| btm_ble_clear_irk_index(p_dev_rec->ble.resolving_list_index); |
| p_dev_rec->ble.resolving_list_index = 0; |
| } |
| } |
| } |
| |
| bool clear_resolving_list_bit(void* data, void* context) { |
| tBTM_SEC_DEV_REC* p_dev_rec = static_cast<tBTM_SEC_DEV_REC*>(data); |
| p_dev_rec->ble.in_controller_list &= ~BTM_RESOLVING_LIST_BIT; |
| return true; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_clear_resolving_list_complete |
| * |
| * Description This function is called when command complete for |
| * clear resolving list |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_ble_clear_resolving_list_complete(uint8_t* p, uint16_t evt_len) { |
| uint8_t status = 0; |
| STREAM_TO_UINT8(status, p); |
| |
| BTM_TRACE_DEBUG("%s status=%d", __func__, status); |
| |
| if (status == HCI_SUCCESS) { |
| if (evt_len >= 3) { |
| /* VSC complete has one extra byte for op code and list size, skip it here |
| */ |
| p++; |
| |
| /* updated the available list size, and current list size */ |
| uint8_t irk_list_sz_max = 0; |
| STREAM_TO_UINT8(irk_list_sz_max, p); |
| |
| if (controller_get_interface()->get_ble_resolving_list_max_size() == 0) |
| btm_ble_resolving_list_init(irk_list_sz_max); |
| |
| uint8_t irk_mask_size = (irk_list_sz_max % 8) ? (irk_list_sz_max / 8 + 1) |
| : (irk_list_sz_max / 8); |
| memset(btm_cb.ble_ctr_cb.irk_list_mask, 0, irk_mask_size); |
| } |
| |
| btm_cb.ble_ctr_cb.resolving_list_avail_size = |
| controller_get_interface()->get_ble_resolving_list_max_size(); |
| |
| BTM_TRACE_DEBUG("%s resolving_list_avail_size=%d", __func__, |
| btm_cb.ble_ctr_cb.resolving_list_avail_size); |
| |
| list_foreach(btm_cb.sec_dev_rec, clear_resolving_list_bit, NULL); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_add_resolving_list_entry_complete |
| * |
| * Description This function is called when command complete for |
| * add resolving list entry |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_ble_add_resolving_list_entry_complete(uint8_t* p, uint16_t evt_len) { |
| uint8_t status; |
| STREAM_TO_UINT8(status, p); |
| |
| BTM_TRACE_DEBUG("%s status = %d", __func__, status); |
| |
| RawAddress pseudo_bda; |
| if (!btm_ble_deq_resolving_pending(pseudo_bda)) { |
| BTM_TRACE_DEBUG("no pending resolving list operation"); |
| return; |
| } |
| |
| if (status == HCI_SUCCESS) { |
| /* privacy 1.2 command complete does not have these extra byte */ |
| if (evt_len > 2) { |
| /* VSC complete has one extra byte for op code, skip it here */ |
| p++; |
| STREAM_TO_UINT8(btm_cb.ble_ctr_cb.resolving_list_avail_size, p); |
| } else |
| btm_cb.ble_ctr_cb.resolving_list_avail_size--; |
| } else if (status == |
| HCI_ERR_MEMORY_FULL) /* BT_ERROR_CODE_MEMORY_CAPACITY_EXCEEDED */ |
| { |
| btm_cb.ble_ctr_cb.resolving_list_avail_size = 0; |
| BTM_TRACE_DEBUG("%s Resolving list Full ", __func__); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_remove_resolving_list_entry_complete |
| * |
| * Description This function is called when command complete for |
| * remove resolving list entry |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_ble_remove_resolving_list_entry_complete(uint8_t* p, |
| uint16_t evt_len) { |
| RawAddress pseudo_bda; |
| uint8_t status; |
| |
| STREAM_TO_UINT8(status, p); |
| |
| BTM_TRACE_DEBUG("%s status = %d", __func__, status); |
| |
| if (!btm_ble_deq_resolving_pending(pseudo_bda)) { |
| BTM_TRACE_ERROR("%s no pending resolving list operation", __func__); |
| return; |
| } |
| |
| if (status == HCI_SUCCESS) { |
| /* proprietary: spec does not have these extra bytes */ |
| if (evt_len > 2) { |
| p++; /* skip opcode */ |
| STREAM_TO_UINT8(btm_cb.ble_ctr_cb.resolving_list_avail_size, p); |
| } else |
| btm_cb.ble_ctr_cb.resolving_list_avail_size++; |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_read_resolving_list_entry_complete |
| * |
| * Description This function is called when command complete for |
| * remove resolving list entry |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_ble_read_resolving_list_entry_complete(uint8_t* p, uint16_t evt_len) { |
| uint8_t status, rra_type = BTM_BLE_ADDR_PSEUDO; |
| RawAddress rra, pseudo_bda; |
| |
| STREAM_TO_UINT8(status, p); |
| |
| BTM_TRACE_DEBUG("%s status = %d", __func__, status); |
| |
| if (!btm_ble_deq_resolving_pending(pseudo_bda)) { |
| BTM_TRACE_ERROR("no pending resolving list operation"); |
| return; |
| } |
| |
| if (status == HCI_SUCCESS) { |
| /* proprietary spec has extra bytes */ |
| if (evt_len > 8) { |
| /* skip subcode, index, IRK value, address type, identity addr type */ |
| p += (2 + 16 + 1 + 6); |
| STREAM_TO_BDADDR(rra, p); |
| |
| VLOG(2) << __func__ << " peer_addr: " << rra; |
| } else { |
| STREAM_TO_BDADDR(rra, p); |
| } |
| btm_ble_refresh_peer_resolvable_private_addr(pseudo_bda, rra, rra_type); |
| } |
| } |
| /******************************************************************************* |
| VSC that implement controller based privacy |
| ******************************************************************************/ |
| /******************************************************************************* |
| * |
| * Function btm_ble_resolving_list_vsc_op_cmpl |
| * |
| * Description IRK operation VSC complete handler |
| * |
| * Parameters |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_ble_resolving_list_vsc_op_cmpl(tBTM_VSC_CMPL* p_params) { |
| uint8_t *p = p_params->p_param_buf, op_subcode; |
| uint16_t evt_len = p_params->param_len; |
| |
| op_subcode = *(p + 1); |
| |
| BTM_TRACE_DEBUG("%s op_subcode = %d", __func__, op_subcode); |
| |
| if (op_subcode == BTM_BLE_META_CLEAR_IRK_LIST) { |
| btm_ble_clear_resolving_list_complete(p, evt_len); |
| } else if (op_subcode == BTM_BLE_META_ADD_IRK_ENTRY) { |
| btm_ble_add_resolving_list_entry_complete(p, evt_len); |
| } else if (op_subcode == BTM_BLE_META_REMOVE_IRK_ENTRY) { |
| btm_ble_remove_resolving_list_entry_complete(p, evt_len); |
| } else if (op_subcode == BTM_BLE_META_READ_IRK_ENTRY) { |
| btm_ble_read_resolving_list_entry_complete(p, evt_len); |
| } else if (op_subcode == BTM_BLE_META_IRK_ENABLE) { |
| /* RPA offloading enable/disabled */ |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_remove_resolving_list_entry |
| * |
| * Description This function to remove an IRK entry from the list |
| * |
| * Parameters ble_addr_type: address type |
| * ble_addr: LE adddress |
| * |
| * Returns status |
| * |
| ******************************************************************************/ |
| tBTM_STATUS btm_ble_remove_resolving_list_entry(tBTM_SEC_DEV_REC* p_dev_rec) { |
| /* if controller does not support RPA offloading or privacy 1.2, skip */ |
| if (controller_get_interface()->get_ble_resolving_list_max_size() == 0) |
| return BTM_WRONG_MODE; |
| |
| if (controller_get_interface()->supports_ble_privacy()) { |
| btsnd_hcic_ble_rm_device_resolving_list(p_dev_rec->ble.static_addr_type, |
| p_dev_rec->ble.static_addr); |
| } else { |
| uint8_t param[20] = {0}; |
| uint8_t* p = param; |
| |
| UINT8_TO_STREAM(p, BTM_BLE_META_REMOVE_IRK_ENTRY); |
| UINT8_TO_STREAM(p, p_dev_rec->ble.static_addr_type); |
| BDADDR_TO_STREAM(p, p_dev_rec->ble.static_addr); |
| |
| BTM_VendorSpecificCommand(HCI_VENDOR_BLE_RPA_VSC, |
| BTM_BLE_META_REMOVE_IRK_LEN, param, |
| btm_ble_resolving_list_vsc_op_cmpl); |
| } |
| |
| btm_ble_enq_resolving_list_pending(p_dev_rec->bd_addr, |
| BTM_BLE_META_REMOVE_IRK_ENTRY); |
| return BTM_CMD_STARTED; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_clear_resolving_list |
| * |
| * Description This function clears the resolving list |
| * |
| * Parameters None. |
| * |
| ******************************************************************************/ |
| void btm_ble_clear_resolving_list(void) { |
| if (controller_get_interface()->supports_ble_privacy()) { |
| btsnd_hcic_ble_clear_resolving_list(); |
| } else { |
| uint8_t param[20] = {0}; |
| uint8_t* p = param; |
| |
| UINT8_TO_STREAM(p, BTM_BLE_META_CLEAR_IRK_LIST); |
| BTM_VendorSpecificCommand(HCI_VENDOR_BLE_RPA_VSC, |
| BTM_BLE_META_CLEAR_IRK_LEN, param, |
| btm_ble_resolving_list_vsc_op_cmpl); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_read_resolving_list_entry |
| * |
| * Description This function read an IRK entry by index |
| * |
| * Parameters entry index. |
| * |
| * Returns status |
| * |
| ******************************************************************************/ |
| tBTM_STATUS btm_ble_read_resolving_list_entry(tBTM_SEC_DEV_REC* p_dev_rec) { |
| if (!(p_dev_rec->ble.in_controller_list & BTM_RESOLVING_LIST_BIT)) |
| return BTM_WRONG_MODE; |
| |
| if (controller_get_interface()->supports_ble_privacy()) { |
| btsnd_hcic_ble_read_resolvable_addr_peer(p_dev_rec->ble.static_addr_type, |
| p_dev_rec->ble.static_addr); |
| } else { |
| uint8_t param[20] = {0}; |
| uint8_t* p = param; |
| |
| UINT8_TO_STREAM(p, BTM_BLE_META_READ_IRK_ENTRY); |
| UINT8_TO_STREAM(p, p_dev_rec->ble.resolving_list_index); |
| |
| BTM_VendorSpecificCommand(HCI_VENDOR_BLE_RPA_VSC, BTM_BLE_META_READ_IRK_LEN, |
| param, btm_ble_resolving_list_vsc_op_cmpl); |
| } |
| |
| btm_ble_enq_resolving_list_pending(p_dev_rec->bd_addr, |
| BTM_BLE_META_READ_IRK_ENTRY); |
| |
| return BTM_CMD_STARTED; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_suspend_resolving_list_activity |
| * |
| * Description This function suspends all resolving list activity, |
| * including scanning, initiating, and advertising, if |
| * resolving list is being enabled. |
| * |
| * Parameters |
| * |
| * Returns true if suspended; false otherwise |
| * |
| ******************************************************************************/ |
| bool btm_ble_suspend_resolving_list_activity(void) { |
| tBTM_BLE_CB* p_ble_cb = &btm_cb.ble_ctr_cb; |
| |
| /* if resolving list is not enabled, do not need to terminate any activity */ |
| /* if asking for stop all activity */ |
| /* if already suspended */ |
| if (p_ble_cb->suspended_rl_state != BTM_BLE_RL_IDLE) return true; |
| |
| /* direct connection active, wait until it completed */ |
| if (btm_ble_get_conn_st() == BLE_DIR_CONN) { |
| BTM_TRACE_ERROR("resolving list can not be edited, EnQ now"); |
| return false; |
| } |
| |
| p_ble_cb->suspended_rl_state = BTM_BLE_RL_IDLE; |
| |
| if (p_ble_cb->inq_var.adv_mode == BTM_BLE_ADV_ENABLE) { |
| btm_ble_stop_adv(); |
| p_ble_cb->suspended_rl_state |= BTM_BLE_RL_ADV; |
| } |
| |
| if (BTM_BLE_IS_SCAN_ACTIVE(p_ble_cb->scan_activity)) { |
| btm_ble_stop_scan(); |
| p_ble_cb->suspended_rl_state |= BTM_BLE_RL_SCAN; |
| } |
| |
| if (btm_ble_suspend_bg_conn()) |
| p_ble_cb->suspended_rl_state |= BTM_BLE_RL_INIT; |
| |
| return true; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_resume_resolving_list_activity |
| * |
| * Description This function resumes the resolving list activity, including |
| * scanning, initiating, and advertising, if any of these |
| * activities has been suspended earlier. |
| * |
| * Returns none |
| * |
| ******************************************************************************/ |
| void btm_ble_resume_resolving_list_activity(void) { |
| tBTM_BLE_CB* p_ble_cb = &btm_cb.ble_ctr_cb; |
| |
| if (p_ble_cb->suspended_rl_state & BTM_BLE_RL_ADV) btm_ble_start_adv(); |
| |
| if (p_ble_cb->suspended_rl_state & BTM_BLE_RL_SCAN) btm_ble_start_scan(); |
| |
| if (p_ble_cb->suspended_rl_state & BTM_BLE_RL_INIT) btm_ble_resume_bg_conn(); |
| |
| p_ble_cb->suspended_rl_state = BTM_BLE_RL_IDLE; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_vendor_enable_irk_feature |
| * |
| * Description This function is called to enable or disable the RRA |
| * offloading feature. |
| * |
| * Parameters enable: enable or disable the RRA offloading feature |
| * |
| ******************************************************************************/ |
| void btm_ble_vendor_enable_irk_feature(bool enable) { |
| uint8_t param[20], *p; |
| |
| p = param; |
| memset(param, 0, 20); |
| |
| /* select feature based on control block settings */ |
| UINT8_TO_STREAM(p, BTM_BLE_META_IRK_ENABLE); |
| UINT8_TO_STREAM(p, enable ? 0x01 : 0x00); |
| |
| BTM_VendorSpecificCommand(HCI_VENDOR_BLE_RPA_VSC, BTM_BLE_IRK_ENABLE_LEN, |
| param, btm_ble_resolving_list_vsc_op_cmpl); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_exe_disable_resolving_list |
| * |
| * Description execute resolving list disable |
| * |
| * Returns none |
| * |
| ******************************************************************************/ |
| bool btm_ble_exe_disable_resolving_list(void) { |
| if (!btm_ble_suspend_resolving_list_activity()) return false; |
| |
| if (!controller_get_interface()->supports_ble_privacy()) |
| btm_ble_vendor_enable_irk_feature(false); |
| else |
| btsnd_hcic_ble_set_addr_resolution_enable(false); |
| |
| return true; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_exe_enable_resolving_list |
| * |
| * Description enable LE resolve address list |
| * |
| * Returns none |
| * |
| ******************************************************************************/ |
| void btm_ble_exe_enable_resolving_list(void) { |
| if (!btm_ble_suspend_resolving_list_activity()) return; |
| |
| if (!controller_get_interface()->supports_ble_privacy()) |
| btm_ble_vendor_enable_irk_feature(true); |
| else |
| btsnd_hcic_ble_set_addr_resolution_enable(true); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_disable_resolving_list |
| * |
| * Description Disable LE Address resolution |
| * |
| * Returns none |
| * |
| ******************************************************************************/ |
| bool btm_ble_disable_resolving_list(uint8_t rl_mask, bool to_resume) { |
| uint8_t rl_state = btm_cb.ble_ctr_cb.rl_state; |
| |
| /* if controller does not support RPA offloading or privacy 1.2, skip */ |
| if (controller_get_interface()->get_ble_resolving_list_max_size() == 0) |
| return false; |
| |
| btm_cb.ble_ctr_cb.rl_state &= ~rl_mask; |
| |
| if (rl_state != BTM_BLE_RL_IDLE && |
| btm_cb.ble_ctr_cb.rl_state == BTM_BLE_RL_IDLE) { |
| if (btm_ble_exe_disable_resolving_list()) { |
| if (to_resume) btm_ble_resume_resolving_list_activity(); |
| |
| return true; |
| } else |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_resolving_list_load_dev |
| * |
| * Description This function adds a device which is using RPA into the |
| * white list. |
| * |
| * Parameters pointer to device security record |
| * |
| * Returns true if device added, otherwise falase. |
| * |
| ******************************************************************************/ |
| bool btm_ble_resolving_list_load_dev(tBTM_SEC_DEV_REC* p_dev_rec) { |
| bool rt = false; |
| uint8_t rl_mask = btm_cb.ble_ctr_cb.rl_state; |
| |
| BTM_TRACE_DEBUG("%s btm_cb.ble_ctr_cb.privacy_mode = %d", __func__, |
| btm_cb.ble_ctr_cb.privacy_mode); |
| |
| /* if controller does not support RPA offloading or privacy 1.2, skip */ |
| if (controller_get_interface()->get_ble_resolving_list_max_size() == 0) |
| return false; |
| |
| BTM_TRACE_DEBUG("%s btm_cb.ble_ctr_cb.privacy_mode = %d", __func__, |
| btm_cb.ble_ctr_cb.privacy_mode); |
| |
| /* only add RPA enabled device into resolving list */ |
| if (p_dev_rec != NULL && /* RPA is being used and PID is known */ |
| ((p_dev_rec->ble.key_type & BTM_LE_KEY_PID) != 0 || |
| (p_dev_rec->ble.key_type & BTM_LE_KEY_LID) != 0)) { |
| if (!(p_dev_rec->ble.in_controller_list & BTM_RESOLVING_LIST_BIT) && |
| btm_ble_brcm_find_resolving_pending_entry( |
| p_dev_rec->bd_addr, BTM_BLE_META_ADD_IRK_ENTRY) == false) { |
| if (btm_cb.ble_ctr_cb.resolving_list_avail_size > 0) { |
| if (rl_mask) { |
| if (!btm_ble_disable_resolving_list(rl_mask, false)) return false; |
| } |
| |
| btm_ble_update_resolving_list(p_dev_rec->bd_addr, true); |
| if (controller_get_interface()->supports_ble_privacy()) { |
| uint8_t* peer_irk = p_dev_rec->ble.keys.irk; |
| uint8_t* local_irk = btm_cb.devcb.id_keys.irk; |
| |
| if (p_dev_rec->ble.static_addr == bd_addr_empty) { |
| p_dev_rec->ble.static_addr = p_dev_rec->bd_addr; |
| p_dev_rec->ble.static_addr_type = p_dev_rec->ble.ble_addr_type; |
| } |
| |
| BTM_TRACE_DEBUG("%s:adding device to controller resolving list", |
| __func__); |
| // use identical IRK for now |
| btsnd_hcic_ble_add_device_resolving_list( |
| p_dev_rec->ble.static_addr_type, p_dev_rec->ble.static_addr, |
| peer_irk, local_irk); |
| |
| if (controller_get_interface()->supports_ble_set_privacy_mode()) { |
| BTM_TRACE_DEBUG("%s: adding device privacy mode", __func__); |
| btsnd_hcic_ble_set_privacy_mode(p_dev_rec->ble.static_addr_type, |
| p_dev_rec->ble.static_addr, 0x01); |
| } |
| } else { |
| uint8_t param[40] = {0}; |
| uint8_t* p = param; |
| |
| UINT8_TO_STREAM(p, BTM_BLE_META_ADD_IRK_ENTRY); |
| ARRAY_TO_STREAM(p, p_dev_rec->ble.keys.irk, BT_OCTET16_LEN); |
| UINT8_TO_STREAM(p, p_dev_rec->ble.static_addr_type); |
| BDADDR_TO_STREAM(p, p_dev_rec->ble.static_addr); |
| |
| BTM_VendorSpecificCommand(HCI_VENDOR_BLE_RPA_VSC, |
| BTM_BLE_META_ADD_IRK_LEN, param, |
| btm_ble_resolving_list_vsc_op_cmpl); |
| } |
| |
| rt = true; |
| btm_ble_enq_resolving_list_pending(p_dev_rec->bd_addr, |
| BTM_BLE_META_ADD_IRK_ENTRY); |
| |
| /* if resolving list has been turned on, re-enable it */ |
| if (rl_mask) |
| btm_ble_enable_resolving_list(rl_mask); |
| else |
| btm_ble_enable_resolving_list(BTM_BLE_RL_INIT); |
| } |
| } else { |
| BTM_TRACE_ERROR("Device already in Resolving list"); |
| rt = true; |
| } |
| } else { |
| BTM_TRACE_DEBUG("Device not a RPA enabled device"); |
| } |
| return rt; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_resolving_list_remove_dev |
| * |
| * Description This function removes the device from resolving list |
| * |
| * Parameters |
| * |
| * Returns status |
| * |
| ******************************************************************************/ |
| void btm_ble_resolving_list_remove_dev(tBTM_SEC_DEV_REC* p_dev_rec) { |
| uint8_t rl_mask = btm_cb.ble_ctr_cb.rl_state; |
| |
| BTM_TRACE_EVENT("%s", __func__); |
| if (rl_mask) { |
| if (!btm_ble_disable_resolving_list(rl_mask, false)) return; |
| } |
| |
| if ((p_dev_rec->ble.in_controller_list & BTM_RESOLVING_LIST_BIT) && |
| btm_ble_brcm_find_resolving_pending_entry( |
| p_dev_rec->bd_addr, BTM_BLE_META_REMOVE_IRK_ENTRY) == false) { |
| btm_ble_update_resolving_list(p_dev_rec->bd_addr, false); |
| btm_ble_remove_resolving_list_entry(p_dev_rec); |
| } else { |
| BTM_TRACE_DEBUG("Device not in resolving list"); |
| } |
| |
| /* if resolving list has been turned on, re-enable it */ |
| if (rl_mask) btm_ble_enable_resolving_list(rl_mask); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_enable_resolving_list |
| * |
| * Description enable LE resolve address list |
| * |
| * Returns none |
| * |
| ******************************************************************************/ |
| void btm_ble_enable_resolving_list(uint8_t rl_mask) { |
| uint8_t rl_state = btm_cb.ble_ctr_cb.rl_state; |
| |
| btm_cb.ble_ctr_cb.rl_state |= rl_mask; |
| if (rl_state == BTM_BLE_RL_IDLE && |
| btm_cb.ble_ctr_cb.rl_state != BTM_BLE_RL_IDLE && |
| controller_get_interface()->get_ble_resolving_list_max_size() != 0) { |
| btm_ble_exe_enable_resolving_list(); |
| btm_ble_resume_resolving_list_activity(); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_resolving_list_empty |
| * |
| * Description check to see if resoving list is empty or not |
| * |
| * Returns true: empty; false non-empty |
| * |
| ******************************************************************************/ |
| bool btm_ble_resolving_list_empty(void) { |
| return (controller_get_interface()->get_ble_resolving_list_max_size() == |
| btm_cb.ble_ctr_cb.resolving_list_avail_size); |
| } |
| |
| bool is_on_resolving_list(void* data, void* context) { |
| tBTM_SEC_DEV_REC* p_dev = static_cast<tBTM_SEC_DEV_REC*>(data); |
| if ((p_dev->ble.in_controller_list & BTM_RESOLVING_LIST_BIT) && |
| (p_dev->ble.in_controller_list & BTM_WHITE_LIST_BIT)) |
| return false; |
| |
| return true; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_enable_resolving_list_for_platform |
| * |
| * Description enable/disable resolving list feature depending on if any |
| * resolving list is empty and whitelist is involoved in the |
| * operation. |
| * |
| * Returns none |
| * |
| ******************************************************************************/ |
| void btm_ble_enable_resolving_list_for_platform(uint8_t rl_mask) { |
| /* if controller does not support, skip */ |
| if (controller_get_interface()->get_ble_resolving_list_max_size() == 0) |
| return; |
| |
| if (btm_cb.ble_ctr_cb.wl_state == BTM_BLE_WL_IDLE) { |
| if (controller_get_interface()->get_ble_resolving_list_max_size() > |
| btm_cb.ble_ctr_cb.resolving_list_avail_size) |
| btm_ble_enable_resolving_list(rl_mask); |
| else |
| btm_ble_disable_resolving_list(rl_mask, true); |
| return; |
| } |
| |
| list_node_t* n = list_foreach(btm_cb.sec_dev_rec, is_on_resolving_list, NULL); |
| if (n) |
| btm_ble_enable_resolving_list(rl_mask); |
| else |
| btm_ble_disable_resolving_list(rl_mask, true); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_resolving_list_init |
| * |
| * Description Initialize resolving list in host stack |
| * |
| * Parameters Max resolving list size |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_ble_resolving_list_init(uint8_t max_irk_list_sz) { |
| tBTM_BLE_RESOLVE_Q* p_q = &btm_cb.ble_ctr_cb.resolving_list_pend_q; |
| uint8_t irk_mask_size = |
| (max_irk_list_sz % 8) ? (max_irk_list_sz / 8 + 1) : (max_irk_list_sz / 8); |
| |
| if (max_irk_list_sz > 0) { |
| p_q->resolve_q_random_pseudo = |
| (RawAddress*)osi_malloc(sizeof(RawAddress) * max_irk_list_sz); |
| p_q->resolve_q_action = (uint8_t*)osi_malloc(max_irk_list_sz); |
| |
| /* RPA offloading feature */ |
| if (btm_cb.ble_ctr_cb.irk_list_mask == NULL) |
| btm_cb.ble_ctr_cb.irk_list_mask = (uint8_t*)osi_malloc(irk_mask_size); |
| |
| BTM_TRACE_DEBUG("%s max_irk_list_sz = %d", __func__, max_irk_list_sz); |
| } |
| |
| controller_get_interface()->set_ble_resolving_list_max_size(max_irk_list_sz); |
| btm_ble_clear_resolving_list(); |
| btm_cb.ble_ctr_cb.resolving_list_avail_size = max_irk_list_sz; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_resolving_list_cleanup |
| * |
| * Description Cleanup resolving list dynamic memory |
| * |
| * Parameters |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_ble_resolving_list_cleanup(void) { |
| tBTM_BLE_RESOLVE_Q* p_q = &btm_cb.ble_ctr_cb.resolving_list_pend_q; |
| |
| osi_free_and_reset((void**)&p_q->resolve_q_random_pseudo); |
| osi_free_and_reset((void**)&p_q->resolve_q_action); |
| |
| controller_get_interface()->set_ble_resolving_list_max_size(0); |
| |
| osi_free_and_reset((void**)&btm_cb.ble_ctr_cb.irk_list_mask); |
| } |
| #endif |