| /****************************************************************************** |
| * |
| * Copyright (C) 2009-2013 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| #include <base/strings/stringprintf.h> |
| #include <string.h> |
| #include "bt_target.h" |
| #include "bt_utils.h" |
| #include "btm_int.h" |
| #include "btu.h" |
| #include "gap_api.h" |
| #include "l2c_int.h" |
| #include "l2cdefs.h" |
| #include "osi/include/fixed_queue.h" |
| #include "osi/include/mutex.h" |
| |
| using base::StringPrintf; |
| |
| /* Define the GAP Connection Control Block */ |
| typedef struct { |
| #define GAP_CCB_STATE_IDLE 0 |
| #define GAP_CCB_STATE_LISTENING 1 |
| #define GAP_CCB_STATE_CONN_SETUP 2 |
| #define GAP_CCB_STATE_CFG_SETUP 3 |
| #define GAP_CCB_STATE_WAIT_SEC 4 |
| #define GAP_CCB_STATE_CONNECTED 5 |
| uint8_t con_state; |
| |
| #define GAP_CCB_FLAGS_IS_ORIG 0x01 |
| #define GAP_CCB_FLAGS_HIS_CFG_DONE 0x02 |
| #define GAP_CCB_FLAGS_MY_CFG_DONE 0x04 |
| #define GAP_CCB_FLAGS_SEC_DONE 0x08 |
| #define GAP_CCB_FLAGS_CONN_DONE 0x0E |
| uint8_t con_flags; |
| |
| uint8_t service_id; /* Used by BTM */ |
| uint16_t gap_handle; /* GAP handle */ |
| uint16_t connection_id; /* L2CAP CID */ |
| bool rem_addr_specified; |
| uint8_t chan_mode_mask; /* Supported channel modes (FCR) */ |
| RawAddress rem_dev_address; |
| uint16_t psm; |
| uint16_t rem_mtu_size; |
| |
| bool is_congested; |
| fixed_queue_t* tx_queue; /* Queue of buffers waiting to be sent */ |
| fixed_queue_t* rx_queue; /* Queue of buffers waiting to be read */ |
| |
| uint32_t rx_queue_size; /* Total data count in rx_queue */ |
| |
| tGAP_CONN_CALLBACK* p_callback; /* Users callback function */ |
| |
| tL2CAP_CFG_INFO cfg; /* Configuration */ |
| tL2CAP_ERTM_INFO ertm_info; /* Pools and modes for ertm */ |
| tBT_TRANSPORT transport; /* Transport channel BR/EDR or BLE */ |
| tL2CAP_LE_CFG_INFO local_coc_cfg; /* local configuration for LE Coc */ |
| tL2CAP_LE_CFG_INFO peer_coc_cfg; /* local configuration for LE Coc */ |
| } tGAP_CCB; |
| |
| typedef struct { |
| tL2CAP_APPL_INFO reg_info; /* L2CAP Registration info */ |
| tGAP_CCB ccb_pool[GAP_MAX_CONNECTIONS]; |
| } tGAP_CONN; |
| |
| namespace { |
| tGAP_CONN conn; |
| } |
| |
| /******************************************************************************/ |
| /* L O C A L F U N C T I O N P R O T O T Y P E S */ |
| /******************************************************************************/ |
| static void gap_connect_ind(const RawAddress& bd_addr, uint16_t l2cap_cid, |
| uint16_t psm, uint8_t l2cap_id); |
| static void gap_connect_cfm(uint16_t l2cap_cid, uint16_t result); |
| static void gap_config_ind(uint16_t l2cap_cid, tL2CAP_CFG_INFO* p_cfg); |
| static void gap_config_cfm(uint16_t l2cap_cid, tL2CAP_CFG_INFO* p_cfg); |
| static void gap_disconnect_ind(uint16_t l2cap_cid, bool ack_needed); |
| static void gap_data_ind(uint16_t l2cap_cid, BT_HDR* p_msg); |
| static void gap_congestion_ind(uint16_t lcid, bool is_congested); |
| static void gap_tx_complete_ind(uint16_t l2cap_cid, uint16_t sdu_sent); |
| |
| static tGAP_CCB* gap_find_ccb_by_cid(uint16_t cid); |
| static tGAP_CCB* gap_find_ccb_by_handle(uint16_t handle); |
| static tGAP_CCB* gap_allocate_ccb(void); |
| static void gap_release_ccb(tGAP_CCB* p_ccb); |
| static void gap_checks_con_flags(tGAP_CCB* p_ccb); |
| |
| /******************************************************************************* |
| * |
| * Function gap_conn_init |
| * |
| * Description This function is called to initialize GAP connection |
| * management |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void gap_conn_init(void) { |
| memset(&conn, 0, sizeof(tGAP_CONN)); |
| conn.reg_info.pL2CA_ConnectInd_Cb = gap_connect_ind; |
| conn.reg_info.pL2CA_ConnectCfm_Cb = gap_connect_cfm; |
| conn.reg_info.pL2CA_ConnectPnd_Cb = NULL; |
| conn.reg_info.pL2CA_ConfigInd_Cb = gap_config_ind; |
| conn.reg_info.pL2CA_ConfigCfm_Cb = gap_config_cfm; |
| conn.reg_info.pL2CA_DisconnectInd_Cb = gap_disconnect_ind; |
| conn.reg_info.pL2CA_DisconnectCfm_Cb = NULL; |
| conn.reg_info.pL2CA_QoSViolationInd_Cb = NULL; |
| conn.reg_info.pL2CA_DataInd_Cb = gap_data_ind; |
| conn.reg_info.pL2CA_CongestionStatus_Cb = gap_congestion_ind; |
| conn.reg_info.pL2CA_TxComplete_Cb = gap_tx_complete_ind; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function GAP_ConnOpen |
| * |
| * Description This function is called to open an L2CAP connection. |
| * |
| * Parameters: is_server - If true, the connection is not created |
| * but put into a "listen" mode waiting for |
| * the remote side to connect. |
| * |
| * service_id - Unique service ID from |
| * BTM_SEC_SERVICE_FIRST_EMPTY (6) |
| * to BTM_SEC_MAX_SERVICE_RECORDS (32) |
| * |
| * p_rem_bda - Pointer to remote BD Address. |
| * If a server, and we don't care about the |
| * remote BD Address, then NULL should be passed. |
| * |
| * psm - the PSM used for the connection |
| * |
| * p_config - Optional pointer to configuration structure. |
| * If NULL, the default GAP configuration will |
| * be used. |
| * |
| * security - security flags |
| * chan_mode_mask - (GAP_FCR_CHAN_OPT_BASIC, |
| * GAP_FCR_CHAN_OPT_ERTM, |
| * GAP_FCR_CHAN_OPT_STREAM) |
| * |
| * p_cb - Pointer to callback function for events. |
| * |
| * Returns handle of the connection if successful, else |
| * GAP_INVALID_HANDLE |
| * |
| ******************************************************************************/ |
| uint16_t GAP_ConnOpen(const char* p_serv_name, uint8_t service_id, |
| bool is_server, const RawAddress* p_rem_bda, uint16_t psm, |
| tL2CAP_CFG_INFO* p_cfg, tL2CAP_ERTM_INFO* ertm_info, |
| uint16_t security, uint8_t chan_mode_mask, |
| tGAP_CONN_CALLBACK* p_cb, tBT_TRANSPORT transport) { |
| tGAP_CCB* p_ccb; |
| uint16_t cid; |
| |
| DVLOG(1) << "GAP_CONN - Open Request"; |
| |
| /* Allocate a new CCB. Return if none available. */ |
| p_ccb = gap_allocate_ccb(); |
| if (p_ccb == NULL) return (GAP_INVALID_HANDLE); |
| |
| /* update the transport */ |
| p_ccb->transport = transport; |
| |
| /* If caller specified a BD address, save it */ |
| if (p_rem_bda) { |
| /* the bd addr is not bd_addr_any, then a bd address was specified */ |
| if (*p_rem_bda != bd_addr_any) p_ccb->rem_addr_specified = true; |
| |
| p_ccb->rem_dev_address = *p_rem_bda; |
| } else if (!is_server) { |
| /* remore addr is not specified and is not a server -> bad */ |
| return (GAP_INVALID_HANDLE); |
| } |
| |
| /* A client MUST have specified a bd addr to connect with */ |
| if (!p_ccb->rem_addr_specified && !is_server) { |
| gap_release_ccb(p_ccb); |
| LOG(ERROR) |
| << "GAP ERROR: Client must specify a remote BD ADDR to connect to!"; |
| return (GAP_INVALID_HANDLE); |
| } |
| |
| /* Check if configuration was specified */ |
| if (p_cfg) p_ccb->cfg = *p_cfg; |
| |
| /* Configure L2CAP COC, if transport is LE */ |
| if (transport == BT_TRANSPORT_LE) { |
| p_ccb->local_coc_cfg.credits = L2CAP_LE_DEFAULT_CREDIT; |
| p_ccb->local_coc_cfg.mtu = p_cfg->mtu; |
| p_ccb->local_coc_cfg.mps = L2CAP_LE_DEFAULT_MPS; |
| } |
| |
| p_ccb->p_callback = p_cb; |
| |
| /* If originator, use a dynamic PSM */ |
| if (!is_server) |
| conn.reg_info.pL2CA_ConnectInd_Cb = NULL; |
| else |
| conn.reg_info.pL2CA_ConnectInd_Cb = gap_connect_ind; |
| |
| /* Register the PSM with L2CAP */ |
| if (transport == BT_TRANSPORT_BR_EDR) { |
| p_ccb->psm = L2CA_REGISTER( |
| psm, &conn.reg_info, AMP_AUTOSWITCH_ALLOWED | AMP_USE_AMP_IF_POSSIBLE); |
| if (p_ccb->psm == 0) { |
| LOG(ERROR) << StringPrintf("%s: Failure registering PSM 0x%04x", __func__, |
| psm); |
| gap_release_ccb(p_ccb); |
| return (GAP_INVALID_HANDLE); |
| } |
| } |
| |
| if (transport == BT_TRANSPORT_LE) { |
| p_ccb->psm = L2CA_REGISTER_COC( |
| psm, &conn.reg_info, AMP_AUTOSWITCH_ALLOWED | AMP_USE_AMP_IF_POSSIBLE); |
| if (p_ccb->psm == 0) { |
| LOG(ERROR) << StringPrintf("%s: Failure registering PSM 0x%04x", __func__, |
| psm); |
| gap_release_ccb(p_ccb); |
| return (GAP_INVALID_HANDLE); |
| } |
| } |
| |
| /* Register with Security Manager for the specific security level */ |
| p_ccb->service_id = service_id; |
| if (!BTM_SetSecurityLevel((uint8_t)!is_server, p_serv_name, p_ccb->service_id, |
| security, p_ccb->psm, 0, 0)) { |
| LOG(ERROR) << "GAP_CONN - Security Error"; |
| gap_release_ccb(p_ccb); |
| return (GAP_INVALID_HANDLE); |
| } |
| |
| /* Fill in eL2CAP parameter data */ |
| if (p_ccb->cfg.fcr_present) { |
| if (ertm_info == NULL) { |
| p_ccb->ertm_info.preferred_mode = p_ccb->cfg.fcr.mode; |
| p_ccb->ertm_info.user_rx_buf_size = GAP_DATA_BUF_SIZE; |
| p_ccb->ertm_info.user_tx_buf_size = GAP_DATA_BUF_SIZE; |
| p_ccb->ertm_info.fcr_rx_buf_size = L2CAP_INVALID_ERM_BUF_SIZE; |
| p_ccb->ertm_info.fcr_tx_buf_size = L2CAP_INVALID_ERM_BUF_SIZE; |
| } else { |
| p_ccb->ertm_info = *ertm_info; |
| } |
| } |
| |
| /* optional FCR channel modes */ |
| if (ertm_info != NULL) { |
| p_ccb->ertm_info.allowed_modes = |
| (chan_mode_mask) ? chan_mode_mask : (uint8_t)L2CAP_FCR_CHAN_OPT_BASIC; |
| } |
| |
| if (is_server) { |
| p_ccb->con_flags |= |
| GAP_CCB_FLAGS_SEC_DONE; /* assume btm/l2cap would handle it */ |
| p_ccb->con_state = GAP_CCB_STATE_LISTENING; |
| return (p_ccb->gap_handle); |
| } else { |
| /* We are the originator of this connection */ |
| p_ccb->con_flags = GAP_CCB_FLAGS_IS_ORIG; |
| |
| /* Transition to the next appropriate state, waiting for connection confirm. |
| */ |
| p_ccb->con_state = GAP_CCB_STATE_CONN_SETUP; |
| |
| /* mark security done flag, when security is not required */ |
| if ((security & (BTM_SEC_OUT_AUTHORIZE | BTM_SEC_OUT_AUTHENTICATE | |
| BTM_SEC_OUT_ENCRYPT)) == 0) |
| p_ccb->con_flags |= GAP_CCB_FLAGS_SEC_DONE; |
| |
| /* Check if L2CAP started the connection process */ |
| if (p_rem_bda && (transport == BT_TRANSPORT_BR_EDR)) { |
| cid = L2CA_CONNECT_REQ(p_ccb->psm, *p_rem_bda, &p_ccb->ertm_info); |
| if (cid != 0) { |
| p_ccb->connection_id = cid; |
| return (p_ccb->gap_handle); |
| } |
| } |
| |
| if (p_rem_bda && (transport == BT_TRANSPORT_LE)) { |
| cid = L2CA_CONNECT_COC_REQ(p_ccb->psm, *p_rem_bda, &p_ccb->local_coc_cfg); |
| if (cid != 0) { |
| p_ccb->connection_id = cid; |
| return (p_ccb->gap_handle); |
| } |
| } |
| |
| gap_release_ccb(p_ccb); |
| return (GAP_INVALID_HANDLE); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function GAP_ConnClose |
| * |
| * Description This function is called to close a connection. |
| * |
| * Parameters: handle - Handle of the connection returned by GAP_ConnOpen |
| * |
| * Returns BT_PASS - closed OK |
| * GAP_ERR_BAD_HANDLE - invalid handle |
| * |
| ******************************************************************************/ |
| uint16_t GAP_ConnClose(uint16_t gap_handle) { |
| tGAP_CCB* p_ccb = gap_find_ccb_by_handle(gap_handle); |
| |
| DVLOG(1) << StringPrintf("GAP_CONN - close handle: 0x%x", gap_handle); |
| |
| if (p_ccb) { |
| /* Check if we have a connection ID */ |
| if (p_ccb->con_state != GAP_CCB_STATE_LISTENING) |
| L2CA_DISCONNECT_REQ(p_ccb->connection_id); |
| |
| gap_release_ccb(p_ccb); |
| |
| return (BT_PASS); |
| } |
| |
| return (GAP_ERR_BAD_HANDLE); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function GAP_ConnReadData |
| * |
| * Description Normally not GKI aware application will call this function |
| * after receiving GAP_EVT_RXDATA event. |
| * |
| * Parameters: handle - Handle of the connection returned in the Open |
| * p_data - Data area |
| * max_len - Byte count requested |
| * p_len - Byte count received |
| * |
| * Returns BT_PASS - data read |
| * GAP_ERR_BAD_HANDLE - invalid handle |
| * GAP_NO_DATA_AVAIL - no data available |
| * |
| ******************************************************************************/ |
| uint16_t GAP_ConnReadData(uint16_t gap_handle, uint8_t* p_data, |
| uint16_t max_len, uint16_t* p_len) { |
| tGAP_CCB* p_ccb = gap_find_ccb_by_handle(gap_handle); |
| uint16_t copy_len; |
| |
| if (!p_ccb) return (GAP_ERR_BAD_HANDLE); |
| |
| *p_len = 0; |
| |
| if (fixed_queue_is_empty(p_ccb->rx_queue)) return (GAP_NO_DATA_AVAIL); |
| |
| mutex_global_lock(); |
| |
| while (max_len) { |
| BT_HDR* p_buf = |
| static_cast<BT_HDR*>(fixed_queue_try_peek_first(p_ccb->rx_queue)); |
| if (p_buf == NULL) break; |
| |
| copy_len = (p_buf->len > max_len) ? max_len : p_buf->len; |
| max_len -= copy_len; |
| *p_len += copy_len; |
| if (p_data) { |
| memcpy(p_data, (uint8_t*)(p_buf + 1) + p_buf->offset, copy_len); |
| p_data += copy_len; |
| } |
| |
| if (p_buf->len > copy_len) { |
| p_buf->offset += copy_len; |
| p_buf->len -= copy_len; |
| break; |
| } |
| osi_free(fixed_queue_try_dequeue(p_ccb->rx_queue)); |
| } |
| |
| p_ccb->rx_queue_size -= *p_len; |
| |
| mutex_global_unlock(); |
| |
| DVLOG(1) << StringPrintf("GAP_ConnReadData - rx_queue_size left=%d, *p_len=%d", |
| p_ccb->rx_queue_size, *p_len); |
| |
| return (BT_PASS); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function GAP_GetRxQueueCnt |
| * |
| * Description This function return number of bytes on the rx queue. |
| * |
| * Parameters: handle - Handle returned in the GAP_ConnOpen |
| * p_rx_queue_count - Pointer to return queue count in. |
| * |
| * |
| ******************************************************************************/ |
| int GAP_GetRxQueueCnt(uint16_t handle, uint32_t* p_rx_queue_count) { |
| tGAP_CCB* p_ccb; |
| int rc = BT_PASS; |
| |
| /* Check that handle is valid */ |
| if (handle < GAP_MAX_CONNECTIONS) { |
| p_ccb = &conn.ccb_pool[handle]; |
| |
| if (p_ccb->con_state == GAP_CCB_STATE_CONNECTED) { |
| *p_rx_queue_count = p_ccb->rx_queue_size; |
| } else |
| rc = GAP_INVALID_HANDLE; |
| } else |
| rc = GAP_INVALID_HANDLE; |
| |
| DVLOG(1) << StringPrintf("GAP_GetRxQueueCnt - rc = 0x%04x, rx_queue_count=%d", rc, |
| *p_rx_queue_count); |
| |
| return (rc); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function GAP_ConnBTRead |
| * |
| * Description Bluetooth-aware applications will call this function after |
| * receiving GAP_EVT_RXDATA event. |
| * |
| * Parameters: handle - Handle of the connection returned in the Open |
| * pp_buf - pointer to address of buffer with data, |
| * |
| * Returns BT_PASS - data read |
| * GAP_ERR_BAD_HANDLE - invalid handle |
| * GAP_NO_DATA_AVAIL - no data available |
| * |
| ******************************************************************************/ |
| uint16_t GAP_ConnBTRead(uint16_t gap_handle, BT_HDR** pp_buf) { |
| tGAP_CCB* p_ccb = gap_find_ccb_by_handle(gap_handle); |
| BT_HDR* p_buf; |
| |
| if (!p_ccb) return (GAP_ERR_BAD_HANDLE); |
| |
| p_buf = (BT_HDR*)fixed_queue_try_dequeue(p_ccb->rx_queue); |
| |
| if (p_buf) { |
| *pp_buf = p_buf; |
| |
| p_ccb->rx_queue_size -= p_buf->len; |
| return (BT_PASS); |
| } else { |
| *pp_buf = NULL; |
| return (GAP_NO_DATA_AVAIL); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function GAP_ConnWriteData |
| * |
| * Description Normally not GKI aware application will call this function |
| * to send data to the connection. |
| * |
| * Parameters: handle - Handle of the connection returned in the Open |
| * p_data - Data area |
| * max_len - Byte count requested |
| * p_len - Byte count received |
| * |
| * Returns BT_PASS - data read |
| * GAP_ERR_BAD_HANDLE - invalid handle |
| * GAP_ERR_BAD_STATE - connection not established |
| * GAP_CONGESTION - system is congested |
| * |
| ******************************************************************************/ |
| uint16_t GAP_ConnWriteData(uint16_t gap_handle, uint8_t* p_data, |
| uint16_t max_len, uint16_t* p_len) { |
| tGAP_CCB* p_ccb = gap_find_ccb_by_handle(gap_handle); |
| BT_HDR* p_buf; |
| |
| *p_len = 0; |
| |
| if (!p_ccb) return (GAP_ERR_BAD_HANDLE); |
| |
| if (p_ccb->con_state != GAP_CCB_STATE_CONNECTED) return (GAP_ERR_BAD_STATE); |
| |
| while (max_len) { |
| if (p_ccb->cfg.fcr.mode == L2CAP_FCR_ERTM_MODE) |
| p_buf = (BT_HDR*)osi_malloc(L2CAP_FCR_ERTM_BUF_SIZE); |
| else |
| p_buf = (BT_HDR*)osi_malloc(GAP_DATA_BUF_SIZE); |
| |
| p_buf->offset = L2CAP_MIN_OFFSET; |
| p_buf->len = |
| (p_ccb->rem_mtu_size < max_len) ? p_ccb->rem_mtu_size : max_len; |
| p_buf->event = BT_EVT_TO_BTU_SP_DATA; |
| |
| memcpy((uint8_t*)(p_buf + 1) + p_buf->offset, p_data, p_buf->len); |
| |
| *p_len += p_buf->len; |
| max_len -= p_buf->len; |
| p_data += p_buf->len; |
| |
| DVLOG(1) << StringPrintf("GAP_WriteData %d bytes", p_buf->len); |
| |
| fixed_queue_enqueue(p_ccb->tx_queue, p_buf); |
| } |
| |
| if (p_ccb->is_congested) { |
| return (BT_PASS); |
| } |
| |
| /* Send the buffer through L2CAP */ |
| while ((p_buf = (BT_HDR*)fixed_queue_try_dequeue(p_ccb->tx_queue)) != NULL) { |
| uint8_t status = L2CA_DATA_WRITE(p_ccb->connection_id, p_buf); |
| |
| if (status == L2CAP_DW_CONGESTED) { |
| p_ccb->is_congested = true; |
| break; |
| } else if (status != L2CAP_DW_SUCCESS) |
| return (GAP_ERR_BAD_STATE); |
| } |
| |
| return (BT_PASS); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function GAP_ConnReconfig |
| * |
| * Description Applications can call this function to reconfigure the |
| * connection. |
| * |
| * Parameters: handle - Handle of the connection |
| * p_cfg - Pointer to new configuration |
| * |
| * Returns BT_PASS - config process started |
| * GAP_ERR_BAD_HANDLE - invalid handle |
| * |
| ******************************************************************************/ |
| uint16_t GAP_ConnReconfig(uint16_t gap_handle, tL2CAP_CFG_INFO* p_cfg) { |
| tGAP_CCB* p_ccb = gap_find_ccb_by_handle(gap_handle); |
| |
| if (!p_ccb) return (GAP_ERR_BAD_HANDLE); |
| |
| p_ccb->cfg = *p_cfg; |
| |
| if (p_ccb->con_state == GAP_CCB_STATE_CONNECTED) |
| L2CA_CONFIG_REQ(p_ccb->connection_id, p_cfg); |
| |
| return (BT_PASS); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function GAP_ConnSetIdleTimeout |
| * |
| * Description Higher layers call this function to set the idle timeout for |
| * a connection, or for all future connections. The "idle |
| * timeout" is the amount of time that a connection can remain |
| * up with no L2CAP channels on it. A timeout of zero means |
| * that the connection will be torn down immediately when the |
| * last channel is removed. A timeout of 0xFFFF means no |
| * timeout. Values are in seconds. |
| * |
| * Parameters: handle - Handle of the connection |
| * timeout - in secs |
| * 0 = immediate disconnect when last channel is |
| * removed |
| * 0xFFFF = no idle timeout |
| * |
| * Returns BT_PASS - config process started |
| * GAP_ERR_BAD_HANDLE - invalid handle |
| * |
| ******************************************************************************/ |
| uint16_t GAP_ConnSetIdleTimeout(uint16_t gap_handle, uint16_t timeout) { |
| tGAP_CCB* p_ccb; |
| |
| p_ccb = gap_find_ccb_by_handle(gap_handle); |
| if (p_ccb == NULL) return (GAP_ERR_BAD_HANDLE); |
| |
| if (L2CA_SetIdleTimeout(p_ccb->connection_id, timeout, false)) |
| return (BT_PASS); |
| else |
| return (GAP_ERR_BAD_HANDLE); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function GAP_ConnGetRemoteAddr |
| * |
| * Description This function is called to get the remote BD address |
| * of a connection. |
| * |
| * Parameters: handle - Handle of the connection returned by GAP_ConnOpen |
| * |
| * Returns BT_PASS - closed OK |
| * GAP_ERR_BAD_HANDLE - invalid handle |
| * |
| ******************************************************************************/ |
| const RawAddress* GAP_ConnGetRemoteAddr(uint16_t gap_handle) { |
| tGAP_CCB* p_ccb = gap_find_ccb_by_handle(gap_handle); |
| |
| DVLOG(1) << __func__ << " gap_handle = " << gap_handle; |
| |
| if ((p_ccb) && (p_ccb->con_state > GAP_CCB_STATE_LISTENING)) { |
| DVLOG(1) << __func__ << " BDA: " << p_ccb->rem_dev_address; |
| return &p_ccb->rem_dev_address; |
| } else { |
| DVLOG(1) << __func__ << " return Error "; |
| return nullptr; |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function GAP_ConnGetRemMtuSize |
| * |
| * Description Returns the remote device's MTU size |
| * |
| * Parameters: handle - Handle of the connection |
| * |
| * Returns uint16_t - maximum size buffer that can be transmitted to |
| * the peer |
| * |
| ******************************************************************************/ |
| uint16_t GAP_ConnGetRemMtuSize(uint16_t gap_handle) { |
| tGAP_CCB* p_ccb; |
| |
| p_ccb = gap_find_ccb_by_handle(gap_handle); |
| if (p_ccb == NULL) return (0); |
| |
| return (p_ccb->rem_mtu_size); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function GAP_ConnGetL2CAPCid |
| * |
| * Description Returns the L2CAP channel id |
| * |
| * Parameters: handle - Handle of the connection |
| * |
| * Returns uint16_t - The L2CAP channel id |
| * 0, if error |
| * |
| ******************************************************************************/ |
| uint16_t GAP_ConnGetL2CAPCid(uint16_t gap_handle) { |
| tGAP_CCB* p_ccb; |
| |
| p_ccb = gap_find_ccb_by_handle(gap_handle); |
| if (p_ccb == NULL) return (0); |
| |
| return (p_ccb->connection_id); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_tx_connect_ind |
| * |
| * Description Sends out GAP_EVT_TX_EMPTY when transmission has been |
| * completed. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void gap_tx_complete_ind(uint16_t l2cap_cid, uint16_t sdu_sent) { |
| tGAP_CCB* p_ccb = gap_find_ccb_by_cid(l2cap_cid); |
| if (p_ccb == NULL) return; |
| |
| if ((p_ccb->con_state == GAP_CCB_STATE_CONNECTED) && (sdu_sent == 0xFFFF)) { |
| DVLOG(1) << StringPrintf("%s: GAP_EVT_TX_EMPTY", __func__); |
| p_ccb->p_callback(p_ccb->gap_handle, GAP_EVT_TX_EMPTY); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_connect_ind |
| * |
| * Description This function handles an inbound connection indication |
| * from L2CAP. This is the case where we are acting as a |
| * server. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void gap_connect_ind(const RawAddress& bd_addr, uint16_t l2cap_cid, |
| uint16_t psm, uint8_t l2cap_id) { |
| uint16_t xx; |
| tGAP_CCB* p_ccb; |
| |
| /* See if we have a CCB listening for the connection */ |
| for (xx = 0, p_ccb = conn.ccb_pool; xx < GAP_MAX_CONNECTIONS; xx++, p_ccb++) { |
| if ((p_ccb->con_state == GAP_CCB_STATE_LISTENING) && (p_ccb->psm == psm) && |
| ((p_ccb->rem_addr_specified == false) || |
| (bd_addr == p_ccb->rem_dev_address))) |
| break; |
| } |
| |
| if (xx == GAP_MAX_CONNECTIONS) { |
| LOG(WARNING) << "*******"; |
| LOG(WARNING) << "WARNING: GAP Conn Indication for Unexpected Bd " |
| "Addr...Disconnecting"; |
| LOG(WARNING) << "*******"; |
| |
| /* Disconnect because it is an unexpected connection */ |
| L2CA_DISCONNECT_REQ(l2cap_cid); |
| return; |
| } |
| |
| /* Transition to the next appropriate state, waiting for config setup. */ |
| if (p_ccb->transport == BT_TRANSPORT_BR_EDR) |
| p_ccb->con_state = GAP_CCB_STATE_CFG_SETUP; |
| |
| /* Save the BD Address and Channel ID. */ |
| p_ccb->rem_dev_address = bd_addr; |
| p_ccb->connection_id = l2cap_cid; |
| |
| /* Send response to the L2CAP layer. */ |
| if (p_ccb->transport == BT_TRANSPORT_BR_EDR) |
| L2CA_CONNECT_RSP(bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_OK, L2CAP_CONN_OK, |
| &p_ccb->ertm_info); |
| |
| if (p_ccb->transport == BT_TRANSPORT_LE) { |
| L2CA_CONNECT_COC_RSP(bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_OK, |
| L2CAP_CONN_OK, &p_ccb->local_coc_cfg); |
| |
| /* get the remote coc configuration */ |
| L2CA_GET_PEER_COC_CONFIG(l2cap_cid, &p_ccb->peer_coc_cfg); |
| p_ccb->rem_mtu_size = p_ccb->peer_coc_cfg.mtu; |
| |
| /* configuration is not required for LE COC */ |
| p_ccb->con_flags |= GAP_CCB_FLAGS_HIS_CFG_DONE; |
| p_ccb->con_flags |= GAP_CCB_FLAGS_MY_CFG_DONE; |
| gap_checks_con_flags(p_ccb); |
| } |
| |
| DVLOG(1) << StringPrintf("GAP_CONN - Rcvd L2CAP conn ind, CID: 0x%x", |
| p_ccb->connection_id); |
| |
| /* Send a Configuration Request. */ |
| if (p_ccb->transport == BT_TRANSPORT_BR_EDR) |
| L2CA_CONFIG_REQ(l2cap_cid, &p_ccb->cfg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_checks_con_flags |
| * |
| * Description This function processes the L2CAP configuration indication |
| * event. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void gap_checks_con_flags(tGAP_CCB* p_ccb) { |
| DVLOG(1) << __func__ << " conn_flags:0x" << +p_ccb->con_flags; |
| /* if all the required con_flags are set, report the OPEN event now */ |
| if ((p_ccb->con_flags & GAP_CCB_FLAGS_CONN_DONE) == GAP_CCB_FLAGS_CONN_DONE) { |
| p_ccb->con_state = GAP_CCB_STATE_CONNECTED; |
| |
| p_ccb->p_callback(p_ccb->gap_handle, GAP_EVT_CONN_OPENED); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_sec_check_complete |
| * |
| * Description The function called when Security Manager finishes |
| * verification of the service side connection |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void gap_sec_check_complete(const RawAddress*, tBT_TRANSPORT, |
| void* p_ref_data, uint8_t res) { |
| tGAP_CCB* p_ccb = (tGAP_CCB*)p_ref_data; |
| |
| DVLOG(1) << StringPrintf( |
| "gap_sec_check_complete conn_state:%d, conn_flags:0x%x, status:%d", |
| p_ccb->con_state, p_ccb->con_flags, res); |
| if (p_ccb->con_state == GAP_CCB_STATE_IDLE) return; |
| |
| if (res == BTM_SUCCESS) { |
| p_ccb->con_flags |= GAP_CCB_FLAGS_SEC_DONE; |
| gap_checks_con_flags(p_ccb); |
| } else { |
| /* security failed - disconnect the channel */ |
| L2CA_DISCONNECT_REQ(p_ccb->connection_id); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_connect_cfm |
| * |
| * Description This function handles the connect confirm events |
| * from L2CAP. This is the case when we are acting as a |
| * client and have sent a connect request. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void gap_connect_cfm(uint16_t l2cap_cid, uint16_t result) { |
| tGAP_CCB* p_ccb; |
| |
| /* Find CCB based on CID */ |
| p_ccb = gap_find_ccb_by_cid(l2cap_cid); |
| if (p_ccb == NULL) return; |
| |
| /* initiate security process, if needed */ |
| if ((p_ccb->con_flags & GAP_CCB_FLAGS_SEC_DONE) == 0 && |
| p_ccb->transport != BT_TRANSPORT_LE) { |
| btm_sec_mx_access_request(p_ccb->rem_dev_address, p_ccb->psm, true, 0, 0, |
| &gap_sec_check_complete, p_ccb); |
| } |
| |
| /* If the connection response contains success status, then */ |
| /* Transition to the next state and startup the timer. */ |
| if ((result == L2CAP_CONN_OK) && |
| (p_ccb->con_state == GAP_CCB_STATE_CONN_SETUP)) { |
| if (p_ccb->transport == BT_TRANSPORT_BR_EDR) { |
| p_ccb->con_state = GAP_CCB_STATE_CFG_SETUP; |
| |
| /* Send a Configuration Request. */ |
| L2CA_CONFIG_REQ(l2cap_cid, &p_ccb->cfg); |
| } |
| |
| if (p_ccb->transport == BT_TRANSPORT_LE) { |
| /* get the remote coc configuration */ |
| L2CA_GET_PEER_COC_CONFIG(l2cap_cid, &p_ccb->peer_coc_cfg); |
| p_ccb->rem_mtu_size = p_ccb->peer_coc_cfg.mtu; |
| |
| /* configuration is not required for LE COC */ |
| p_ccb->con_flags |= GAP_CCB_FLAGS_HIS_CFG_DONE; |
| p_ccb->con_flags |= GAP_CCB_FLAGS_MY_CFG_DONE; |
| p_ccb->con_flags |= GAP_CCB_FLAGS_SEC_DONE; |
| gap_checks_con_flags(p_ccb); |
| } |
| } else { |
| /* Tell the user if he has a callback */ |
| if (p_ccb->p_callback) |
| (*p_ccb->p_callback)(p_ccb->gap_handle, GAP_EVT_CONN_CLOSED); |
| |
| gap_release_ccb(p_ccb); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_config_ind |
| * |
| * Description This function processes the L2CAP configuration indication |
| * event. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void gap_config_ind(uint16_t l2cap_cid, tL2CAP_CFG_INFO* p_cfg) { |
| tGAP_CCB* p_ccb; |
| uint16_t local_mtu_size; |
| |
| /* Find CCB based on CID */ |
| p_ccb = gap_find_ccb_by_cid(l2cap_cid); |
| if (p_ccb == NULL) return; |
| |
| /* Remember the remote MTU size */ |
| |
| if (p_ccb->cfg.fcr.mode == L2CAP_FCR_ERTM_MODE) { |
| local_mtu_size = |
| p_ccb->ertm_info.user_tx_buf_size - sizeof(BT_HDR) - L2CAP_MIN_OFFSET; |
| } else |
| local_mtu_size = L2CAP_MTU_SIZE; |
| |
| if ((!p_cfg->mtu_present) || (p_cfg->mtu > local_mtu_size)) { |
| p_ccb->rem_mtu_size = local_mtu_size; |
| } else |
| p_ccb->rem_mtu_size = p_cfg->mtu; |
| |
| /* For now, always accept configuration from the other side */ |
| p_cfg->flush_to_present = false; |
| p_cfg->mtu_present = false; |
| p_cfg->result = L2CAP_CFG_OK; |
| p_cfg->fcs_present = false; |
| |
| L2CA_CONFIG_RSP(l2cap_cid, p_cfg); |
| |
| p_ccb->con_flags |= GAP_CCB_FLAGS_HIS_CFG_DONE; |
| |
| gap_checks_con_flags(p_ccb); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_config_cfm |
| * |
| * Description This function processes the L2CAP configuration confirmation |
| * event. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void gap_config_cfm(uint16_t l2cap_cid, tL2CAP_CFG_INFO* p_cfg) { |
| tGAP_CCB* p_ccb; |
| |
| /* Find CCB based on CID */ |
| p_ccb = gap_find_ccb_by_cid(l2cap_cid); |
| if (p_ccb == NULL) return; |
| |
| if (p_cfg->result == L2CAP_CFG_OK) { |
| p_ccb->con_flags |= GAP_CCB_FLAGS_MY_CFG_DONE; |
| |
| if (p_ccb->cfg.fcr_present) |
| p_ccb->cfg.fcr.mode = p_cfg->fcr.mode; |
| else |
| p_ccb->cfg.fcr.mode = L2CAP_FCR_BASIC_MODE; |
| |
| gap_checks_con_flags(p_ccb); |
| } else { |
| p_ccb->p_callback(p_ccb->gap_handle, GAP_EVT_CONN_CLOSED); |
| gap_release_ccb(p_ccb); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_disconnect_ind |
| * |
| * Description This function handles a disconnect event from L2CAP. If |
| * requested to, we ack the disconnect before dropping the CCB |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void gap_disconnect_ind(uint16_t l2cap_cid, bool ack_needed) { |
| tGAP_CCB* p_ccb; |
| |
| DVLOG(1) << StringPrintf("GAP_CONN - Rcvd L2CAP disc, CID: 0x%x", l2cap_cid); |
| |
| /* Find CCB based on CID */ |
| p_ccb = gap_find_ccb_by_cid(l2cap_cid); |
| if (p_ccb == NULL) return; |
| |
| if (ack_needed) L2CA_DISCONNECT_RSP(l2cap_cid); |
| |
| p_ccb->p_callback(p_ccb->gap_handle, GAP_EVT_CONN_CLOSED); |
| gap_release_ccb(p_ccb); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_data_ind |
| * |
| * Description This function is called when data is received from L2CAP. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void gap_data_ind(uint16_t l2cap_cid, BT_HDR* p_msg) { |
| tGAP_CCB* p_ccb; |
| |
| /* Find CCB based on CID */ |
| p_ccb = gap_find_ccb_by_cid(l2cap_cid); |
| if (p_ccb == NULL) { |
| osi_free(p_msg); |
| return; |
| } |
| |
| if (p_ccb->con_state == GAP_CCB_STATE_CONNECTED) { |
| fixed_queue_enqueue(p_ccb->rx_queue, p_msg); |
| |
| p_ccb->rx_queue_size += p_msg->len; |
| /* |
| DVLOG(1) << StringPrintf ("gap_data_ind - rx_queue_size=%d, msg len=%d", |
| p_ccb->rx_queue_size, p_msg->len); |
| */ |
| |
| p_ccb->p_callback(p_ccb->gap_handle, GAP_EVT_CONN_DATA_AVAIL); |
| } else { |
| osi_free(p_msg); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_congestion_ind |
| * |
| * Description This is a callback function called by L2CAP when |
| * data L2CAP congestion status changes |
| * |
| ******************************************************************************/ |
| static void gap_congestion_ind(uint16_t lcid, bool is_congested) { |
| tGAP_CCB* p_ccb; |
| uint16_t event; |
| BT_HDR* p_buf; |
| uint8_t status; |
| |
| DVLOG(1) << StringPrintf("GAP_CONN - Rcvd L2CAP Is Congested (%d), CID: 0x%x", |
| is_congested, lcid); |
| |
| /* Find CCB based on CID */ |
| p_ccb = gap_find_ccb_by_cid(lcid); |
| if (p_ccb == NULL) return; |
| |
| p_ccb->is_congested = is_congested; |
| |
| event = (is_congested) ? GAP_EVT_CONN_CONGESTED : GAP_EVT_CONN_UNCONGESTED; |
| p_ccb->p_callback(p_ccb->gap_handle, event); |
| |
| if (!is_congested) { |
| while ((p_buf = (BT_HDR*)fixed_queue_try_dequeue(p_ccb->tx_queue)) != |
| NULL) { |
| status = L2CA_DATA_WRITE(p_ccb->connection_id, p_buf); |
| |
| if (status == L2CAP_DW_CONGESTED) { |
| p_ccb->is_congested = true; |
| break; |
| } else if (status != L2CAP_DW_SUCCESS) |
| break; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_find_ccb_by_cid |
| * |
| * Description This function searches the CCB table for an entry with the |
| * passed CID. |
| * |
| * Returns the CCB address, or NULL if not found. |
| * |
| ******************************************************************************/ |
| static tGAP_CCB* gap_find_ccb_by_cid(uint16_t cid) { |
| uint16_t xx; |
| tGAP_CCB* p_ccb; |
| |
| /* Look through each connection control block */ |
| for (xx = 0, p_ccb = conn.ccb_pool; xx < GAP_MAX_CONNECTIONS; xx++, p_ccb++) { |
| if ((p_ccb->con_state != GAP_CCB_STATE_IDLE) && |
| (p_ccb->connection_id == cid)) |
| return (p_ccb); |
| } |
| |
| /* If here, not found */ |
| return (NULL); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_find_ccb_by_handle |
| * |
| * Description This function searches the CCB table for an entry with the |
| * passed handle. |
| * |
| * Returns the CCB address, or NULL if not found. |
| * |
| ******************************************************************************/ |
| static tGAP_CCB* gap_find_ccb_by_handle(uint16_t handle) { |
| tGAP_CCB* p_ccb; |
| |
| /* Check that handle is valid */ |
| if (handle < GAP_MAX_CONNECTIONS) { |
| p_ccb = &conn.ccb_pool[handle]; |
| |
| if (p_ccb->con_state != GAP_CCB_STATE_IDLE) return (p_ccb); |
| } |
| |
| /* If here, handle points to invalid connection */ |
| return (NULL); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_allocate_ccb |
| * |
| * Description This function allocates a new CCB. |
| * |
| * Returns CCB address, or NULL if none available. |
| * |
| ******************************************************************************/ |
| static tGAP_CCB* gap_allocate_ccb(void) { |
| uint16_t xx; |
| tGAP_CCB* p_ccb; |
| |
| /* Look through each connection control block for a free one */ |
| for (xx = 0, p_ccb = conn.ccb_pool; xx < GAP_MAX_CONNECTIONS; xx++, p_ccb++) { |
| if (p_ccb->con_state == GAP_CCB_STATE_IDLE) { |
| memset(p_ccb, 0, sizeof(tGAP_CCB)); |
| p_ccb->tx_queue = fixed_queue_new(SIZE_MAX); |
| p_ccb->rx_queue = fixed_queue_new(SIZE_MAX); |
| |
| p_ccb->gap_handle = xx; |
| p_ccb->rem_mtu_size = L2CAP_MTU_SIZE; |
| |
| return (p_ccb); |
| } |
| } |
| |
| /* If here, no free CCB found */ |
| return (NULL); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function gap_release_ccb |
| * |
| * Description This function releases a CCB. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void gap_release_ccb(tGAP_CCB* p_ccb) { |
| /* Drop any buffers we may be holding */ |
| p_ccb->rx_queue_size = 0; |
| |
| while (!fixed_queue_is_empty(p_ccb->rx_queue)) |
| osi_free(fixed_queue_try_dequeue(p_ccb->rx_queue)); |
| fixed_queue_free(p_ccb->rx_queue, NULL); |
| p_ccb->rx_queue = NULL; |
| |
| while (!fixed_queue_is_empty(p_ccb->tx_queue)) |
| osi_free(fixed_queue_try_dequeue(p_ccb->tx_queue)); |
| fixed_queue_free(p_ccb->tx_queue, NULL); |
| p_ccb->tx_queue = NULL; |
| |
| p_ccb->con_state = GAP_CCB_STATE_IDLE; |
| |
| /* If no-one else is using the PSM, deregister from L2CAP */ |
| tGAP_CCB* p_ccb_local = conn.ccb_pool; |
| for (uint16_t i = 0; i < GAP_MAX_CONNECTIONS; i++, p_ccb_local++) { |
| if ((p_ccb_local->con_state != GAP_CCB_STATE_IDLE) && |
| (p_ccb_local->psm == p_ccb->psm)) { |
| DVLOG(1) << __func__ << " : " << +p_ccb_local->psm |
| << " PSM is still in use, do not deregister"; |
| return; |
| } |
| } |
| |
| /* Free the security record for this PSM */ |
| BTM_SecClrService(p_ccb->service_id); |
| if (p_ccb->transport == BT_TRANSPORT_BR_EDR) L2CA_DEREGISTER(p_ccb->psm); |
| if (p_ccb->transport == BT_TRANSPORT_LE) L2CA_DEREGISTER_COC(p_ccb->psm); |
| } |
| |
| extern void gap_attr_db_init(void); |
| |
| /* |
| * This routine should not be called except once per stack invocation. |
| */ |
| void GAP_Init(void) { |
| gap_conn_init(); |
| gap_attr_db_init(); |
| } |