Merge changes I1abcf94d,I720b8a16
* changes:
Simplify security level parameter for SDP
L2CAP: Remove never used API Ping and Echo
diff --git a/btif/src/btif_rc.cc b/btif/src/btif_rc.cc
index d8ea94c..b61bf4f 100644
--- a/btif/src/btif_rc.cc
+++ b/btif/src/btif_rc.cc
@@ -2939,11 +2939,12 @@
return;
}
// interval is only valid for AVRC_EVT_PLAY_POS_CHANGED
- uint32_t interval = 0;
+ uint32_t interval_in_seconds = 0;
if (p_event->event_id == AVRC_EVT_PLAY_POS_CHANGED) {
- interval = 2000;
+ interval_in_seconds = 2;
}
- status = register_notification_cmd(p_transaction->lbl, p_event->event_id, interval, p_dev);
+ status = register_notification_cmd(p_transaction->lbl, p_event->event_id,
+ interval_in_seconds, p_dev);
if (status != BT_STATUS_SUCCESS) {
BTIF_TRACE_ERROR("%s: Error in Notification registration: %d", __func__,
status);
diff --git a/gd/cert/gd_device.py b/gd/cert/gd_device.py
index 8f84dbc..fa9d24f 100644
--- a/gd/cert/gd_device.py
+++ b/gd/cert/gd_device.py
@@ -85,3 +85,4 @@
self.hci_classic_security.command_complete_stream = EventStream(self.hci_classic_security.FetchCommandCompleteEvent)
self.l2cap.packet_stream = EventStream(self.l2cap.FetchL2capData)
self.l2cap.connection_complete_stream = EventStream(self.l2cap.FetchConnectionComplete)
+ self.l2cap.connection_close_stream = EventStream(self.l2cap.FetchConnectionClose)
diff --git a/gd/cert/pts_base_test.py b/gd/cert/pts_base_test.py
new file mode 100644
index 0000000..07154ea
--- /dev/null
+++ b/gd/cert/pts_base_test.py
@@ -0,0 +1,39 @@
+#!/usr/bin/env python3
+#
+# Copyright 2019 - The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from acts.base_test import BaseTestClass
+
+import importlib
+import logging
+import os
+import signal
+import sys
+import subprocess
+
+ANDROID_BUILD_TOP = os.environ.get('ANDROID_BUILD_TOP')
+
+sys.path.append(ANDROID_BUILD_TOP + '/out/soong/.intermediates/system/bt/gd/BluetoothFacadeAndCertGeneratedStub_py/gen')
+
+
+class PTSBaseTestClass(BaseTestClass):
+ def __init__(self, configs):
+ BaseTestClass.__init__(self, configs)
+
+ gd_devices = self.controller_configs.get("GdDevice")
+
+ self.register_controller(
+ importlib.import_module('cert.gd_device'),
+ builtin=True)
diff --git a/gd/cert/run_pts_l2cap.sh b/gd/cert/run_pts_l2cap.sh
new file mode 100755
index 0000000..4539c65
--- /dev/null
+++ b/gd/cert/run_pts_l2cap.sh
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+# For bluetooth_packets_python3
+export PYTHONPATH=$PYTHONPATH:$ANDROID_BUILD_TOP/out/host/linux-x86/lib64
+python3.8 `which act.py` -c $ANDROID_BUILD_TOP/system/bt/gd/l2cap/pts/pts.json -tf $ANDROID_BUILD_TOP/system/bt/gd/l2cap/pts/pts_l2cap_testcase -tp $ANDROID_BUILD_TOP/system/bt/gd
diff --git a/gd/hci/hci_packets.pdl b/gd/hci/hci_packets.pdl
index 18838d4..5a24468 100644
--- a/gd/hci/hci_packets.pdl
+++ b/gd/hci/hci_packets.pdl
@@ -22,6 +22,11 @@
COMPLETE_LOCAL_NAME = 0x09,
TX_POWER_LEVEL = 0x0A,
CLASS_OF_DEVICE = 0x0D,
+ SERVICE_DATA_16_BIT_UUIDS = 0x16,
+ APPEARANCE = 0x19,
+ SERVICE_DATA_32_BIT_UUIDS = 0x20,
+ SERVICE_DATA_128_BIT_UUIDS = 0x21,
+ MANUFACTURER_SPECIFIC_DATA = 0xFF,
}
struct GapData {
diff --git a/gd/l2cap/classic/cert/pts_l2cap_test.py b/gd/l2cap/classic/cert/pts_l2cap_test.py
new file mode 100644
index 0000000..57ccb36
--- /dev/null
+++ b/gd/l2cap/classic/cert/pts_l2cap_test.py
@@ -0,0 +1,190 @@
+from cert.pts_base_test import PTSBaseTestClass
+from facade import common_pb2
+from facade import rootservice_pb2 as facade_rootservice_pb2
+from l2cap.classic import facade_pb2 as l2cap_facade_pb2
+from google.protobuf import empty_pb2
+
+from datetime import timedelta
+import time
+class PTSL2capTest(PTSBaseTestClass):
+ def setup_test(self):
+ self.device_under_test = self.gd_devices[0]
+
+ self.device_under_test.rootservice.StartStack(
+ facade_rootservice_pb2.StartStackRequest(
+ module_under_test=facade_rootservice_pb2.BluetoothModule.Value('L2CAP'),
+ )
+ )
+
+ self.device_under_test.wait_channel_ready()
+
+ dut_address = self.device_under_test.controller_read_only_property.ReadLocalAddress(empty_pb2.Empty()).address
+ pts_address = self.controller_configs.get('pts_address').lower()
+ self.device_under_test.address = dut_address
+
+ self.dut_address = common_pb2.BluetoothAddress(
+ address=self.device_under_test.address)
+ self.pts_address = common_pb2.BluetoothAddress(
+ address=str.encode(pts_address))
+
+ def teardown_test(self):
+ self.device_under_test.rootservice.StopStack(
+ facade_rootservice_pb2.StopStackRequest()
+ )
+
+ def _pending_connection_complete(self, timeout=30):
+ dut_connection_stream = self.device_under_test.l2cap.connection_complete_stream
+ dut_connection_stream.subscribe()
+ dut_connection_stream.assert_event_occurs(
+ lambda device : device.remote.address == self.pts_address.address,
+ timeout=timedelta(seconds=timeout)
+ )
+ dut_connection_stream.unsubscribe()
+
+ def _pending_connection_close(self, timeout=30):
+ dut_connection_close_stream = self.device_under_test.l2cap.connection_close_stream
+ dut_connection_close_stream.subscribe()
+ dut_connection_close_stream.assert_event_occurs(
+ lambda device : device.remote.address == self.pts_address.address,
+ timeout=timedelta(seconds=timeout)
+ )
+ dut_connection_close_stream.unsubscribe()
+
+ def test_L2CAP_COS_CED_BV_01_C(self):
+ """
+ L2CAP/COS/CED/BV-01-C [Request Connection]
+ Verify that the IUT is able to request the connection establishment for an L2CAP data channel and
+ initiate the configuration procedure.
+ """
+ psm = 1
+ self.device_under_test.l2cap.OpenChannel(l2cap_facade_pb2.OpenChannelRequest(remote=self.pts_address, psm=psm))
+ self._pending_connection_complete()
+ self.device_under_test.l2cap.CloseChannel(l2cap_facade_pb2.CloseChannelRequest(psm=psm))
+ self._pending_connection_close()
+
+ def test_L2CAP_COS_CED_BV_03_C(self):
+ """
+ L2CAP/COS/CED/BV-03-C [Send Data]
+ Verify that the IUT is able to send DATA.
+ """
+ psm = 1
+ self.device_under_test.l2cap.SetDynamicChannel(l2cap_facade_pb2.SetEnableDynamicChannelRequest(
+ psm=psm, retransmission_mode=l2cap_facade_pb2.RetransmissionFlowControlMode.BASIC))
+ self._pending_connection_complete()
+ self.device_under_test.l2cap.SendDynamicChannelPacket(l2cap_facade_pb2.DynamicChannelPacket(psm=psm, payload=b'abc'*34))
+ self._pending_connection_close()
+
+ def test_L2CAP_COS_CED_BV_04_C(self):
+ """
+ L2CAP/COS/CED/BV-04-C [Disconnect]
+ Verify that the IUT is able to disconnect the data channel.
+ """
+ psm = 1
+ self.device_under_test.l2cap.SetDynamicChannel(l2cap_facade_pb2.SetEnableDynamicChannelRequest(
+ psm=psm, retransmission_mode=l2cap_facade_pb2.RetransmissionFlowControlMode.BASIC))
+ self._pending_connection_complete()
+ time.sleep(2)
+ self.device_under_test.l2cap.CloseChannel(l2cap_facade_pb2.CloseChannelRequest(psm=psm))
+ self._pending_connection_close()
+
+ def test_L2CAP_COS_CED_BV_05_C(self):
+ """
+ L2CAP/COS/CED/BV-05-C [Accept Connection]
+ Verify that the IUT is able to disconnect the data channel.
+ """
+ psm = 1
+ self.device_under_test.l2cap.SetDynamicChannel(l2cap_facade_pb2.SetEnableDynamicChannelRequest(
+ psm=psm, retransmission_mode=l2cap_facade_pb2.RetransmissionFlowControlMode.BASIC))
+ self._pending_connection_complete()
+ self._pending_connection_close()
+
+ def test_L2CAP_COS_CED_BV_07_C(self):
+ """
+ L2CAP/COS/CED/BV-07-C [Accept Disconnect]
+ Verify that the IUT is able to respond to the request to disconnect the data channel.
+ """
+ psm = 1
+ self.device_under_test.l2cap.SetDynamicChannel(l2cap_facade_pb2.SetEnableDynamicChannelRequest(
+ psm=psm, retransmission_mode=l2cap_facade_pb2.RetransmissionFlowControlMode.BASIC))
+ self._pending_connection_complete()
+ self._pending_connection_close()
+
+ def test_L2CAP_COS_CED_BV_08_C(self):
+ """
+ L2CAP/COS/CED/BV-08-C [Disconnect on Timeout]
+ Verify that the IUT disconnects the data channel and shuts down this channel if no response occurs
+ """
+ psm = 1
+ self.device_under_test.l2cap.SetDynamicChannel(l2cap_facade_pb2.SetEnableDynamicChannelRequest(
+ psm=psm, retransmission_mode=l2cap_facade_pb2.RetransmissionFlowControlMode.BASIC))
+
+ time.sleep(120)
+
+ def test_L2CAP_COS_CED_BV_09_C(self):
+ """
+ L2CAP/COS/CED/BV-09-C [Receive Multi-Command Packet]
+ Verify that the IUT is able to receive more than one signaling command in one L2CAP packet.
+ """
+ psm = 1
+ self.device_under_test.l2cap.SetDynamicChannel(l2cap_facade_pb2.SetEnableDynamicChannelRequest(
+ psm=psm, retransmission_mode=l2cap_facade_pb2.RetransmissionFlowControlMode.BASIC))
+ self._pending_connection_complete()
+ self._pending_connection_close()
+
+ def test_L2CAP_COS_CED_BV_11_C(self):
+ """
+ L2CAP/COS/CED/BV-11-C [Configure MTU Size]
+ Verify that the IUT is able to configure the supported MTU size
+ """
+ psm = 1
+ self.device_under_test.l2cap.SetDynamicChannel(l2cap_facade_pb2.SetEnableDynamicChannelRequest(
+ psm=psm, retransmission_mode=l2cap_facade_pb2.RetransmissionFlowControlMode.BASIC))
+ self._pending_connection_complete()
+ self._pending_connection_close()
+
+ def test_L2CAP_COS_CED_BI_01_C(self):
+ """
+ L2CAP/COS/CED/BI-01-C [Reject Unknown Command]
+ Verify that the IUT rejects an unknown signaling command.
+ """
+ psm = 1
+ self.device_under_test.l2cap.SetDynamicChannel(l2cap_facade_pb2.SetEnableDynamicChannelRequest(
+ psm=psm, retransmission_mode=l2cap_facade_pb2.RetransmissionFlowControlMode.BASIC))
+ self._pending_connection_complete()
+ time.sleep(5)
+
+ def test_L2CAP_COS_CFD_BV_03_C(self):
+ """
+ L2CAP/COS/CFD/BV-03-C [Send Requested Options]
+ Verify that the IUT can receive a configuration request with no options and send the requested
+ options to the Lower Tester
+ """
+ psm = 1
+ self.device_under_test.l2cap.SetDynamicChannel(l2cap_facade_pb2.SetEnableDynamicChannelRequest(
+ psm=psm, retransmission_mode=l2cap_facade_pb2.RetransmissionFlowControlMode.BASIC))
+ self._pending_connection_close()
+
+ def test_L2CAP_COS_CFD_BV_08_C(self):
+ """
+ L2CAP/COS/CFD/BV-08-C [Non-blocking Config Response]
+ Verify that the IUT does not block transmitting L2CAP_ConfigRsp while waiting for L2CAP_ConfigRsp
+ from the Lower Tester.
+ """
+ psm = 1
+ self.device_under_test.l2cap.OpenChannel(l2cap_facade_pb2.OpenChannelRequest(remote=self.pts_address, psm=psm))
+ self._pending_connection_complete()
+ self.device_under_test.l2cap.CloseChannel(l2cap_facade_pb2.CloseChannelRequest(psm=psm))
+ self._pending_connection_close()
+
+
+ def test_L2CAP_ERM_BI_01_C(self):
+ """
+ L2CAP/ERM/BI-01-C [S-Frame [REJ] Lost or Corrupted]
+ Verify the IUT can handle receipt of an S-=frame [RR] Poll = 1 if the S-frame [REJ] sent from the IUT
+ is lost.
+ """
+ psm = 1
+ self.device_under_test.l2cap.SetDynamicChannel(l2cap_facade_pb2.SetEnableDynamicChannelRequest(
+ psm=psm, retransmission_mode=l2cap_facade_pb2.RetransmissionFlowControlMode.ERTM))
+ self._pending_connection_complete()
+ self._pending_connection_close(timeout=60)
diff --git a/gd/l2cap/classic/facade.cc b/gd/l2cap/classic/facade.cc
index 64f3810..83073f7 100644
--- a/gd/l2cap/classic/facade.cc
+++ b/gd/l2cap/classic/facade.cc
@@ -64,6 +64,22 @@
return connection_complete_stream_.HandleRequest(context, request, writer);
}
+ class ConnectionCloseCallback : public grpc::GrpcEventStreamCallback<ConnectionCloseEvent, ConnectionCloseEvent> {
+ public:
+ void OnWriteResponse(ConnectionCloseEvent* response, const ConnectionCloseEvent& event) override {
+ response->CopyFrom(event);
+ }
+
+ } connection_close_callback_;
+ ::bluetooth::grpc::GrpcEventStream<ConnectionCloseEvent, ConnectionCloseEvent> connection_close_stream_{
+ &connection_close_callback_};
+
+ ::grpc::Status FetchConnectionClose(::grpc::ServerContext* context,
+ const ::bluetooth::facade::EventStreamRequest* request,
+ ::grpc::ServerWriter<classic::ConnectionCloseEvent>* writer) override {
+ return connection_close_stream_.HandleRequest(context, request, writer);
+ }
+
::grpc::Status Connect(::grpc::ServerContext* context, const facade::BluetoothAddress* request,
::google::protobuf::Empty* response) override {
auto fixed_channel_manager = l2cap_layer_->GetFixedChannelManager();
@@ -108,6 +124,17 @@
return ::grpc::Status::OK;
}
+ ::grpc::Status CloseChannel(::grpc::ServerContext* context,
+ const ::bluetooth::l2cap::classic::CloseChannelRequest* request,
+ ::google::protobuf::Empty* response) override {
+ auto psm = request->psm();
+ if (dynamic_channel_helper_map_.find(request->psm()) == dynamic_channel_helper_map_.end()) {
+ return ::grpc::Status(::grpc::StatusCode::FAILED_PRECONDITION, "Psm not registered");
+ }
+ dynamic_channel_helper_map_[psm]->disconnect();
+ return ::grpc::Status::OK;
+ }
+
::grpc::Status FetchL2capData(::grpc::ServerContext* context, const ::bluetooth::facade::EventStreamRequest* request,
::grpc::ServerWriter<classic::L2capPacket>* writer) override {
return l2cap_stream_.HandleRequest(context, request, writer);
@@ -218,6 +245,10 @@
common::Bind(&L2capDynamicChannelHelper::on_connect_fail, common::Unretained(this)), handler_);
}
+ void disconnect() {
+ channel_->Close();
+ }
+
void on_l2cap_service_registration_complete(DynamicChannelManager::RegistrationResult registration_result,
std::unique_ptr<DynamicChannelService> service) {}
@@ -226,6 +257,15 @@
event.mutable_remote()->set_address(channel->GetDevice().ToString());
facade_service_->connection_complete_stream_.OnIncomingEvent(event);
channel_ = std::move(channel);
+ channel_->RegisterOnCloseCallback(
+ handler_, common::Bind(&L2capDynamicChannelHelper::on_close_callback, common::Unretained(this)));
+ }
+
+ void on_close_callback(hci::ErrorCode errorCode) {
+ ConnectionCloseEvent event;
+ event.mutable_remote()->set_address(channel_->GetDevice().ToString());
+ event.set_reason(static_cast<uint32_t>(errorCode));
+ facade_service_->connection_close_stream_.OnIncomingEvent(event);
}
void on_connect_fail(DynamicChannelManager::ConnectionResult result) {}
diff --git a/gd/l2cap/classic/facade.proto b/gd/l2cap/classic/facade.proto
index ab2a911..535dca9 100644
--- a/gd/l2cap/classic/facade.proto
+++ b/gd/l2cap/classic/facade.proto
@@ -12,12 +12,15 @@
rpc FetchConnectionComplete(facade.EventStreamRequest) returns (stream ConnectionCompleteEvent) {
// Testing Android Bluetooth stack only. Optional for other stack.
}
+ rpc FetchConnectionClose(facade.EventStreamRequest) returns (stream ConnectionCloseEvent) {
+ // Testing Android Bluetooth stack only. Optional for other stack.
+ }
rpc Connect(facade.BluetoothAddress) returns (google.protobuf.Empty) {}
rpc OpenChannel(OpenChannelRequest) returns (google.protobuf.Empty) {}
+ rpc CloseChannel(CloseChannelRequest) returns (google.protobuf.Empty) {}
rpc ConfigureChannel(ConfigureChannelRequest) returns (google.protobuf.Empty) {}
rpc SendL2capPacket(L2capPacket) returns (SendL2capPacketResult) {}
rpc FetchL2capData(facade.EventStreamRequest) returns (stream L2capPacket) {}
- rpc RegisterDynamicChannel(RegisterDynamicChannelRequest) returns (google.protobuf.Empty) {}
rpc SetDynamicChannel(SetEnableDynamicChannelRequest) returns (google.protobuf.Empty) {}
rpc SendDynamicChannelPacket(DynamicChannelPacket) returns (google.protobuf.Empty) {}
}
@@ -30,6 +33,11 @@
facade.BluetoothAddress remote = 1;
}
+message ConnectionCloseEvent {
+ facade.BluetoothAddress remote = 1;
+ uint32 reason = 2;
+}
+
enum RetransmissionFlowControlMode {
BASIC = 0;
ERTM = 3;
@@ -47,8 +55,7 @@
}
message CloseChannelRequest {
- facade.BluetoothAddress remote = 1;
- uint32 cid = 2;
+ uint32 psm = 1;
}
enum ChannelSignalEventType {
@@ -77,10 +84,6 @@
bytes payload = 3;
}
-message RegisterDynamicChannelRequest {
- uint32 psm = 1;
-}
-
message SetEnableDynamicChannelRequest {
uint32 psm = 1;
bool enable = 2;
diff --git a/gd/l2cap/le/l2cap_le_module.cc b/gd/l2cap/le/l2cap_le_module.cc
index 781843d..4959547 100644
--- a/gd/l2cap/le/l2cap_le_module.cc
+++ b/gd/l2cap/le/l2cap_le_module.cc
@@ -48,6 +48,9 @@
¶meter_provider_};
};
+L2capLeModule::L2capLeModule() {}
+L2capLeModule::~L2capLeModule() {}
+
void L2capLeModule::ListDependencies(ModuleList* list) {
list->add<hci::AclManager>();
}
@@ -71,4 +74,4 @@
} // namespace le
} // namespace l2cap
-} // namespace bluetooth
\ No newline at end of file
+} // namespace bluetooth
diff --git a/gd/l2cap/le/l2cap_le_module.h b/gd/l2cap/le/l2cap_le_module.h
index 3ee6acf..4ed3d9f 100644
--- a/gd/l2cap/le/l2cap_le_module.h
+++ b/gd/l2cap/le/l2cap_le_module.h
@@ -26,13 +26,13 @@
class L2capLeModule : public bluetooth::Module {
public:
- L2capLeModule() = default;
- ~L2capLeModule() = default;
+ L2capLeModule();
+ virtual ~L2capLeModule();
/**
* Get the api to the LE fixed channel l2cap module
*/
- std::unique_ptr<FixedChannelManager> GetFixedChannelManager();
+ virtual std::unique_ptr<FixedChannelManager> GetFixedChannelManager();
static const ModuleFactory Factory;
@@ -53,4 +53,4 @@
} // namespace le
} // namespace l2cap
-} // namespace bluetooth
\ No newline at end of file
+} // namespace bluetooth
diff --git a/gd/l2cap/le/l2cap_le_module_mock.h b/gd/l2cap/le/l2cap_le_module_mock.h
new file mode 100644
index 0000000..897ddb0
--- /dev/null
+++ b/gd/l2cap/le/l2cap_le_module_mock.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#pragma once
+
+#include "l2cap/le/l2cap_le_module.h"
+
+#include <gmock/gmock.h>
+
+// Unit test interfaces
+namespace bluetooth {
+namespace l2cap {
+namespace le {
+namespace testing {
+
+class MockL2capLeModule : public L2capLeModule {
+ public:
+ MOCK_METHOD(std::unique_ptr<FixedChannelManager>, GetFixedChannelManager, (), (override));
+};
+
+} // namespace testing
+} // namespace le
+} // namespace l2cap
+} // namespace bluetooth
diff --git a/gd/l2cap/pts/pts.json b/gd/l2cap/pts/pts.json
new file mode 100644
index 0000000..76a27be
--- /dev/null
+++ b/gd/l2cap/pts/pts.json
@@ -0,0 +1,34 @@
+
+{ "_description": "Bluetooth cert testing",
+ "testbed":
+ [
+ {
+ "_description": "PTS l2cap layer test",
+ "name": "PTSL2CAP",
+ "GdDevice":
+ [
+ {
+ "grpc_port": "8899",
+ "grpc_root_server_port": "8897",
+ "signal_port": "8895",
+ "label": "stack_under_test",
+ "serial_number": "DUT",
+ "cmd":
+ [
+ "adb",
+ "-s",
+ "$(serial_number)",
+ "shell",
+ "/system/bin/bluetooth_stack_with_facade",
+ "--grpc-port=$(grpc_port)",
+ "--root-server-port=$(grpc_root_server_port)",
+ "--btsnoop=data/misc/bluetooth/logs/btsnoop_hci.log",
+ "--signal-port=$(signal_port)"
+ ]
+ }
+ ],
+ "pts_address": "PTS"
+ }
+ ],
+ "logpath": "/tmp/logs"
+}
diff --git a/gd/l2cap/pts/pts_l2cap_testcase b/gd/l2cap/pts/pts_l2cap_testcase
new file mode 100644
index 0000000..a0ae40e
--- /dev/null
+++ b/gd/l2cap/pts/pts_l2cap_testcase
@@ -0,0 +1 @@
+PTSL2capTest
diff --git a/gd/l2cap/pts/run_pts_l2cap.sh b/gd/l2cap/pts/run_pts_l2cap.sh
new file mode 100755
index 0000000..9165f58
--- /dev/null
+++ b/gd/l2cap/pts/run_pts_l2cap.sh
@@ -0,0 +1,3 @@
+#! /bin/bash
+
+act.py -c $ANDROID_BUILD_TOP/system/bt/gd/l2cap/pts/pts.json -tf $ANDROID_BUILD_TOP/system/bt/gd/l2cap/pts/pts_l2cap_testcase -tp $ANDROID_BUILD_TOP/system/bt/gd
diff --git a/gd/security/initial_informations.h b/gd/security/initial_informations.h
index db560bd..4e5efa4 100644
--- a/gd/security/initial_informations.h
+++ b/gd/security/initial_informations.h
@@ -19,6 +19,7 @@
#pragma once
#include <optional>
+#include <variant>
#include "common/bidi_queue.h"
#include "common/callback.h"
@@ -28,6 +29,7 @@
#include "os/handler.h"
#include "packet/base_packet_builder.h"
#include "packet/packet_view.h"
+#include "security/ecdh_keys.h"
#include "security/pairing_failure.h"
#include "security/smp_packets.h"
#include "security/ui.h"
diff --git a/gd/shim/discoverability.cc b/gd/shim/discoverability.cc
index 5754882..f793404 100644
--- a/gd/shim/discoverability.cc
+++ b/gd/shim/discoverability.cc
@@ -36,26 +36,44 @@
impl(neighbor::DiscoverabilityModule* module) : module_(module) {}
neighbor::DiscoverabilityModule* module_{nullptr};
+
+ bool general_discoverability_enabled_{false};
+ bool limited_discoverability_enabled_{false};
};
void Discoverability::StopDiscoverability() {
- return pimpl_->module_->StopDiscoverability();
+ if (pimpl_->general_discoverability_enabled_ || pimpl_->limited_discoverability_enabled_) {
+ pimpl_->module_->StopDiscoverability();
+ LOG_DEBUG("%s Stopped discoverability", __func__);
+ } else {
+ LOG_WARN("%s Discoverability not enabled", __func__);
+ }
}
void Discoverability::StartLimitedDiscoverability() {
- return pimpl_->module_->StartLimitedDiscoverability();
+ if (pimpl_->general_discoverability_enabled_ || pimpl_->limited_discoverability_enabled_) {
+ LOG_WARN("%s Please stop discoverability before re-enabling", __func__);
+ return;
+ }
+ pimpl_->module_->StartLimitedDiscoverability();
+ LOG_DEBUG("%s Started limited discoverability", __func__);
}
void Discoverability::StartGeneralDiscoverability() {
- return pimpl_->module_->StartGeneralDiscoverability();
+ if (pimpl_->general_discoverability_enabled_ || pimpl_->limited_discoverability_enabled_) {
+ LOG_WARN("%s Please stop discoverability before re-enabling", __func__);
+ return;
+ }
+ pimpl_->module_->StartGeneralDiscoverability();
+ LOG_DEBUG("%s Started general discoverability", __func__);
}
bool Discoverability::IsGeneralDiscoverabilityEnabled() const {
- return pimpl_->module_->IsGeneralDiscoverabilityEnabled();
+ return pimpl_->general_discoverability_enabled_;
}
bool Discoverability::IsLimitedDiscoverabilityEnabled() const {
- return pimpl_->module_->IsLimitedDiscoverabilityEnabled();
+ return pimpl_->limited_discoverability_enabled_;
}
/**
diff --git a/main/shim/btm_api.cc b/main/shim/btm_api.cc
index a8adee8..6b9fce7 100644
--- a/main/shim/btm_api.cc
+++ b/main/shim/btm_api.cc
@@ -25,43 +25,13 @@
static bluetooth::shim::Btm shim_btm;
-/*******************************************************************************
- *
- * Function BTM_StartInquiry
- *
- * Description This function is called to start an inquiry.
- *
- * Parameters: p_inqparms - pointer to the inquiry information
- * mode - GENERAL or LIMITED inquiry, BR/LE bit mask
- * seperately
- * duration - length in 1.28 sec intervals (If '0', the
- * inquiry is CANCELLED)
- * max_resps - maximum amount of devices to search for
- * before ending the inquiry
- * filter_cond_type - BTM_CLR_INQUIRY_FILTER,
- * BTM_FILTER_COND_DEVICE_CLASS, or
- * BTM_FILTER_COND_BD_ADDR
- * filter_cond - value for the filter (based on
- * filter_cond_type)
- *
- * p_results_cb - Pointer to the callback routine which gets
- * called upon receipt of an inquiry result. If
- * this field is NULL, the application is not
- * notified.
- *
- * p_cmpl_cb - Pointer to the callback routine which gets
- * called upon completion. If this field is
- * NULL, the application is not notified when
- * completed.
- * Returns tBTM_STATUS
- * BTM_CMD_STARTED if successfully initiated
- * BTM_BUSY if already in progress
- * BTM_ILLEGAL_VALUE if parameter(s) are out of range
- * BTM_NO_RESOURCES if could not allocate resources to start
- * the command
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
+/**
+ * Legacy bluetooth module global control block state
+ */
+extern tBTM_CB btm_cb;
+
+extern void btm_acl_update_busy_level(tBTM_BLI_EVENT event);
+
tBTM_STATUS bluetooth::shim::BTM_StartInquiry(tBTM_INQ_PARMS* p_inqparms,
tBTM_INQ_RESULTS_CB* p_results_cb,
tBTM_CMPL_CB* p_cmpl_cb) {
@@ -90,44 +60,6 @@
return BTM_CMD_STARTED;
}
-/*******************************************************************************
- *
- * Function BTM_SetPeriodicInquiryMode
- *
- * Description This function is called to set the device periodic inquiry
- * mode. If the duration is zero, the periodic inquiry mode is
- * cancelled.
- *
- * Note: We currently do not allow concurrent inquiry and
- * periodic inquiry.
- *
- * Parameters: p_inqparms - pointer to the inquiry information
- * mode - GENERAL or LIMITED inquiry
- * duration - length in 1.28 sec intervals (If '0', the
- * inquiry is CANCELLED)
- * max_resps - maximum amount of devices to search for
- * before ending the inquiry
- * filter_cond_type - BTM_CLR_INQUIRY_FILTER,
- * BTM_FILTER_COND_DEVICE_CLASS, or
- * BTM_FILTER_COND_BD_ADDR
- * filter_cond - value for the filter (based on
- * filter_cond_type)
- *
- * max_delay - maximum amount of time between successive
- * inquiries
- * min_delay - minimum amount of time between successive
- * inquiries
- * p_results_cb - callback returning pointer to results
- * (tBTM_INQ_RESULTS)
- *
- * Returns BTM_CMD_STARTED if successfully started
- * BTM_ILLEGAL_VALUE if a bad parameter is detected
- * BTM_NO_RESOURCES if could not allocate a message buffer
- * BTM_SUCCESS - if cancelling the periodic inquiry
- * BTM_BUSY - if an inquiry is already active
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_SetPeriodicInquiryMode(
tBTM_INQ_PARMS* p_inqparms, uint16_t max_delay, uint16_t min_delay,
tBTM_INQ_RESULTS_CB* p_results_cb) {
@@ -166,22 +98,6 @@
return BTM_MODE_UNSUPPORTED;
}
-/*******************************************************************************
- *
- * Function BTM_SetDiscoverability
- *
- * Description This function is called to set the device into or out of
- * discoverable mode. Discoverable mode means inquiry
- * scans are enabled. If a value of '0' is entered for window
- * or interval, the default values are used.
- *
- * Returns BTM_SUCCESS if successful
- * BTM_BUSY if a setting of the filter is already in progress
- * BTM_NO_RESOURCES if couldn't get a memory pool buffer
- * BTM_ILLEGAL_VALUE if a bad parameter was detected
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_SetDiscoverability(uint16_t discoverable_mode,
uint16_t window,
uint16_t interval) {
@@ -214,22 +130,9 @@
shim_btm.SetClassicGeneralDiscoverability(window, interval);
break;
}
-
return BTM_SUCCESS;
}
-/*******************************************************************************
- *
- * Function BTM_SetInquiryScanType
- *
- * Description This function is called to set the iquiry scan-type to
- * standard or interlaced.
- *
- * Returns BTM_SUCCESS if successful
- * BTM_MODE_UNSUPPORTED if not a 1.2 device
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_SetInquiryScanType(uint16_t scan_type) {
switch (scan_type) {
case kInterlacedScanType:
@@ -246,18 +149,6 @@
return BTM_WRONG_MODE;
}
-/*******************************************************************************
- *
- * Function BTM_SetPageScanType
- *
- * Description This function is called to set the page scan-type to
- * standard or interlaced.
- *
- * Returns BTM_SUCCESS if successful
- * BTM_MODE_UNSUPPORTED if not a 1.2 device
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_SetPageScanType(uint16_t scan_type) {
switch (scan_type) {
case kInterlacedScanType:
@@ -277,21 +168,6 @@
return BTM_WRONG_MODE;
}
-/*******************************************************************************
- *
- * Function BTM_SetInquiryMode
- *
- * Description This function is called to set standard or with RSSI
- * mode of the inquiry for local device.
- *
- * Output Params: mode - standard, with RSSI, extended
- *
- * Returns BTM_SUCCESS if successful
- * BTM_NO_RESOURCES if couldn't get a memory pool buffer
- * BTM_ILLEGAL_VALUE if a bad parameter was detected
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_SetInquiryMode(uint8_t inquiry_mode) {
switch (inquiry_mode) {
case kStandardInquiryResult:
@@ -315,20 +191,6 @@
return BTM_MODE_UNSUPPORTED;
}
-/*******************************************************************************
- *
- * Function BTM_ReadDiscoverability
- *
- * Description This function is called to read the current discoverability
- * mode of the device.
- *
- * Output Params: p_window - current inquiry scan duration
- * p_interval - current inquiry scan interval
- *
- * Returns BTM_NON_DISCOVERABLE, BTM_LIMITED_DISCOVERABLE, or
- * BTM_GENERAL_DISCOVERABLE
- *
- ******************************************************************************/
uint16_t bluetooth::shim::BTM_ReadDiscoverability(uint16_t* p_window,
uint16_t* p_interval) {
DiscoverabilityState state = shim_btm.GetClassicDiscoverabilityState();
@@ -339,37 +201,11 @@
return state.mode;
}
-/*******************************************************************************
- *
- * Function BTM_CancelPeriodicInquiry
- *
- * Description This function cancels a periodic inquiry
- *
- * Returns
- * BTM_NO_RESOURCES if could not allocate a message buffer
- * BTM_SUCCESS - if cancelling the periodic inquiry
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_CancelPeriodicInquiry(void) {
shim_btm.CancelPeriodicInquiry();
return BTM_SUCCESS;
}
-/*******************************************************************************
- *
- * Function BTM_SetConnectability
- *
- * Description This function is called to set the device into or out of
- * connectable mode. Discoverable mode means page scans are
- * enabled.
- *
- * Returns BTM_SUCCESS if successful
- * BTM_ILLEGAL_VALUE if a bad parameter is detected
- * BTM_NO_RESOURCES if could not allocate a message buffer
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_SetConnectability(uint16_t page_mode,
uint16_t window,
uint16_t interval) {
@@ -405,18 +241,6 @@
return BTM_SUCCESS;
}
-/*******************************************************************************
- *
- * Function BTM_ReadConnectability
- *
- * Description This function is called to read the current discoverability
- * mode of the device.
- * Output Params p_window - current page scan duration
- * p_interval - current time between page scans
- *
- * Returns BTM_NON_CONNECTABLE or BTM_CONNECTABLE
- *
- ******************************************************************************/
uint16_t bluetooth::shim::BTM_ReadConnectability(uint16_t* p_window,
uint16_t* p_interval) {
ConnectabilityState state = shim_btm.GetClassicConnectabilityState();
@@ -427,19 +251,6 @@
return state.mode;
}
-/*******************************************************************************
- *
- * Function BTM_IsInquiryActive
- *
- * Description This function returns a bit mask of the current inquiry
- * state
- *
- * Returns BTM_INQUIRY_INACTIVE if inactive (0)
- * BTM_LIMITED_INQUIRY_ACTIVE if a limted inquiry is active
- * BTM_GENERAL_INQUIRY_ACTIVE if a general inquiry is active
- * BTM_PERIODIC_INQUIRY_ACTIVE if a periodic inquiry is active
- *
- ******************************************************************************/
uint16_t bluetooth::shim::BTM_IsInquiryActive(void) {
if (shim_btm.IsLimitedInquiryActive()) {
return BTM_LIMITED_INQUIRY_ACTIVE;
@@ -452,46 +263,11 @@
return BTM_INQUIRY_INACTIVE;
}
-/*******************************************************************************
- *
- * Function BTM_CancelInquiry
- *
- * Description This function cancels an inquiry if active
- *
- * Returns BTM_SUCCESS if successful
- * BTM_NO_RESOURCES if could not allocate a message buffer
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_CancelInquiry(void) {
shim_btm.CancelInquiry();
return BTM_SUCCESS;
}
-/*******************************************************************************
- *
- * Function BTM_ReadRemoteDeviceName
- *
- * Description This function initiates a remote device HCI command to the
- * controller and calls the callback when the process has
- * completed.
- *
- * Input Params: remote_bda - device address of name to retrieve
- * p_cb - callback function called when
- * BTM_CMD_STARTED is returned.
- * A pointer to tBTM_REMOTE_DEV_NAME is
- * passed to the callback.
- *
- * Returns
- * BTM_CMD_STARTED is returned if the request was successfully
- * sent to HCI.
- * BTM_BUSY if already in progress
- * BTM_UNKNOWN_ADDR if device address is bad
- * BTM_NO_RESOURCES if could not allocate resources to start
- * the command
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_ReadRemoteDeviceName(
const RawAddress& raw_address, tBTM_CMPL_CB* callback,
tBT_TRANSPORT transport) {
@@ -512,94 +288,26 @@
return status;
}
-/*******************************************************************************
- *
- * Function BTM_CancelRemoteDeviceName
- *
- * Description This function initiates the cancel request for the specified
- * remote device.
- *
- * Input Params: None
- *
- * Returns
- * BTM_CMD_STARTED is returned if the request was successfully
- * sent to HCI.
- * BTM_NO_RESOURCES if could not allocate resources to start
- * the command
- * BTM_WRONG_MODE if there is not an active remote name
- * request.
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_CancelRemoteDeviceName(void) {
return shim_btm.CancelAllReadRemoteDeviceName();
}
-/*******************************************************************************
- *
- * Function BTM_InqDbRead
- *
- * Description This function looks through the inquiry database for a match
- * based on Bluetooth Device Address. This is the application's
- * interface to get the inquiry details of a specific BD
- * address.
- *
- * Returns pointer to entry, or NULL if not found
- *
- ******************************************************************************/
tBTM_INQ_INFO* bluetooth::shim::BTM_InqDbRead(const RawAddress& p_bda) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
return nullptr;
}
-/*******************************************************************************
- *
- * Function BTM_InqDbFirst
- *
- * Description This function looks through the inquiry database for the
- * first used entry, and returns that. This is used in
- * conjunction with
- * BTM_InqDbNext by applications as a way to walk through the
- * inquiry database.
- *
- * Returns pointer to first in-use entry, or NULL if DB is empty
- *
- ******************************************************************************/
tBTM_INQ_INFO* bluetooth::shim::BTM_InqDbFirst(void) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
return nullptr;
}
-/*******************************************************************************
- *
- * Function BTM_InqDbNext
- *
- * Description This function looks through the inquiry database for the
- * next used entry, and returns that. If the input parameter
- * is NULL, the first entry is returned.
- *
- * Returns pointer to next in-use entry, or NULL if no more found.
- *
- ******************************************************************************/
tBTM_INQ_INFO* bluetooth::shim::BTM_InqDbNext(tBTM_INQ_INFO* p_cur) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
CHECK(p_cur != nullptr);
return nullptr;
}
-/*******************************************************************************
- *
- * Function BTM_ClearInqDb
- *
- * Description This function is called to clear out a device or all devices
- * from the inquiry database.
- *
- * Parameter p_bda - (input) BD_ADDR -> Address of device to clear
- * (NULL clears all entries)
- *
- * Returns BTM_BUSY if an inquiry, get remote name, or event filter
- * is active, otherwise BTM_SUCCESS
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_ClearInqDb(const RawAddress* p_bda) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
if (p_bda == nullptr) {
@@ -610,55 +318,18 @@
return BTM_NO_RESOURCES;
}
-/*******************************************************************************
- *
- * Function BTM_ReadInquiryRspTxPower
- *
- * Description This command will read the inquiry Transmit Power level used
- * to transmit the FHS and EIR data packets. This can be used
- * directly in the Tx Power Level EIR data type.
- *
- * Returns BTM_SUCCESS if successful
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_ReadInquiryRspTxPower(tBTM_CMPL_CB* p_cb) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
CHECK(p_cb != nullptr);
return BTM_NO_RESOURCES;
}
-/*******************************************************************************
- *
- * Function BTM_WriteEIR
- *
- * Description This function is called to write EIR data to controller.
- *
- * Parameters p_buff - allocated HCI command buffer including extended
- * inquriry response
- *
- * Returns BTM_SUCCESS - if successful
- * BTM_MODE_UNSUPPORTED - if local device cannot support it
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_WriteEIR(BT_HDR* p_buff) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
CHECK(p_buff != nullptr);
return BTM_NO_RESOURCES;
}
-/*******************************************************************************
- *
- * Function BTM_HasEirService
- *
- * Description This function is called to know if UUID in bit map of UUID.
- *
- * Parameters p_eir_uuid - bit map of UUID list
- * uuid16 - UUID 16-bit
- *
- * Returns true - if found
- * false - if not found
- *
- ******************************************************************************/
bool bluetooth::shim::BTM_HasEirService(const uint32_t* p_eir_uuid,
uint16_t uuid16) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
@@ -666,21 +337,6 @@
return false;
}
-/*******************************************************************************
- *
- * Function BTM_HasInquiryEirService
- *
- * Description This function is called to know if UUID in bit map of UUID
- * list.
- *
- * Parameters p_results - inquiry results
- * uuid16 - UUID 16-bit
- *
- * Returns BTM_EIR_FOUND - if found
- * BTM_EIR_NOT_FOUND - if not found and it is complete list
- * BTM_EIR_UNKNOWN - if not found and it is not complete list
- *
- ******************************************************************************/
tBTM_EIR_SEARCH_RESULT bluetooth::shim::BTM_HasInquiryEirService(
tBTM_INQ_RESULTS* p_results, uint16_t uuid16) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
@@ -688,59 +344,17 @@
return BTM_EIR_UNKNOWN;
}
-/*******************************************************************************
- *
- * Function BTM_AddEirService
- *
- * Description This function is called to add a service in bit map of UUID
- * list.
- *
- * Parameters p_eir_uuid - bit mask of UUID list for EIR
- * uuid16 - UUID 16-bit
- *
- * Returns None
- *
- ******************************************************************************/
void bluetooth::shim::BTM_AddEirService(uint32_t* p_eir_uuid, uint16_t uuid16) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
CHECK(p_eir_uuid != nullptr);
}
-/*******************************************************************************
- *
- * Function BTM_RemoveEirService
- *
- * Description This function is called to remove a service in bit map of
- * UUID list.
- *
- * Parameters p_eir_uuid - bit mask of UUID list for EIR
- * uuid16 - UUID 16-bit
- *
- * Returns None
- *
- ******************************************************************************/
void bluetooth::shim::BTM_RemoveEirService(uint32_t* p_eir_uuid,
uint16_t uuid16) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
CHECK(p_eir_uuid != nullptr);
}
-/*******************************************************************************
- *
- * Function BTM_GetEirSupportedServices
- *
- * Description This function is called to get UUID list from bit map of
- * UUID list.
- *
- * Parameters p_eir_uuid - bit mask of UUID list for EIR
- * p - reference of current pointer of EIR
- * max_num_uuid16 - max number of UUID can be written in EIR
- * num_uuid16 - number of UUID have been written in EIR
- *
- * Returns BTM_EIR_MORE_16BITS_UUID_TYPE, if it has more than max
- * BTM_EIR_COMPLETE_16BITS_UUID_TYPE, otherwise
- *
- ******************************************************************************/
uint8_t bluetooth::shim::BTM_GetEirSupportedServices(uint32_t* p_eir_uuid,
uint8_t** p,
uint8_t max_num_uuid16,
@@ -753,29 +367,6 @@
return BTM_NO_RESOURCES;
}
-/*******************************************************************************
- *
- * Function BTM_GetEirUuidList
- *
- * Description This function parses EIR and returns UUID list.
- *
- * Parameters p_eir - EIR
- * eir_len - EIR len
- * uuid_size - Uuid::kNumBytes16, Uuid::kNumBytes32,
- * Uuid::kNumBytes128
- * p_num_uuid - return number of UUID in found list
- * p_uuid_list - return UUID list
- * max_num_uuid - maximum number of UUID to be returned
- *
- * Returns 0 - if not found
- * BTM_EIR_COMPLETE_16BITS_UUID_TYPE
- * BTM_EIR_MORE_16BITS_UUID_TYPE
- * BTM_EIR_COMPLETE_32BITS_UUID_TYPE
- * BTM_EIR_MORE_32BITS_UUID_TYPE
- * BTM_EIR_COMPLETE_128BITS_UUID_TYPE
- * BTM_EIR_MORE_128BITS_UUID_TYPE
- *
- ******************************************************************************/
uint8_t bluetooth::shim::BTM_GetEirUuidList(uint8_t* p_eir, size_t eir_len,
uint8_t uuid_size,
uint8_t* p_num_uuid,
@@ -788,12 +379,6 @@
return 0;
}
-/**
- *
- * BLE API HERE
- *
- */
-
bool bluetooth::shim::BTM_SecAddBleDevice(const RawAddress& bd_addr,
BD_NAME bd_name,
tBT_DEVICE_TYPE dev_type,
@@ -802,21 +387,6 @@
return false;
}
-/*******************************************************************************
- *
- * Function BTM_SecAddBleKey
- *
- * Description Add/modify LE device information. This function will be
- * normally called during host startup to restore all required
- * information stored in the NVRAM.
- *
- * Parameters: bd_addr - BD address of the peer
- * p_le_key - LE key values.
- * key_type - LE SMP key type.
- *
- * Returns true if added OK, else false
- *
- ******************************************************************************/
bool bluetooth::shim::BTM_SecAddBleKey(const RawAddress& bd_addr,
tBTM_LE_KEY_VALUE* p_le_key,
tBTM_LE_KEY_TYPE key_type) {
@@ -825,20 +395,6 @@
return false;
}
-/*******************************************************************************
- *
- * Function BTM_BleLoadLocalKeys
- *
- * Description Local local identity key, encryption root or sign counter.
- *
- * Parameters: key_type: type of key, can be BTM_BLE_KEY_TYPE_ID,
- * BTM_BLE_KEY_TYPE_ER
- * or BTM_BLE_KEY_TYPE_COUNTER.
- * p_key: pointer to the key.
- *
- * Returns non2.
- *
- ******************************************************************************/
void bluetooth::shim::BTM_BleLoadLocalKeys(uint8_t key_type,
tBTM_BLE_LOCAL_KEYS* p_key) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
@@ -865,16 +421,6 @@
return bogus_root;
}
-/*******************************************************************************
- *
- * Function BTM_ReadConnectionAddr
- *
- * Description This function is called to get the local device address
- * information.
- *
- * Returns void
- *
- ******************************************************************************/
void bluetooth::shim::BTM_ReadConnectionAddr(const RawAddress& remote_bda,
RawAddress& local_conn_addr,
tBLE_ADDR_TYPE* p_addr_type) {
@@ -882,35 +428,11 @@
CHECK(p_addr_type != nullptr);
}
-/*******************************************************************************
- *
- * Function BTM_IsBleConnection
- *
- * Description This function is called to check if the connection handle
- * for an LE link
- *
- * Returns true if connection is LE link, otherwise false.
- *
- ******************************************************************************/
bool bluetooth::shim::BTM_IsBleConnection(uint16_t conn_handle) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
return false;
}
-/*******************************************************************************
- *
- * Function BTM_ReadRemoteConnectionAddr
- *
- * Description This function is read the remote device address currently used
- *
- * Parameters pseudo_addr: pseudo random address available
- * conn_addr:connection address used
- * p_addr_type : BD Address type, Public or Random of the address
- * used
- *
- * Returns bool, true if connection to remote device exists, else false
- *
- ******************************************************************************/
bool bluetooth::shim::BTM_ReadRemoteConnectionAddr(
const RawAddress& pseudo_addr, RawAddress& conn_addr,
tBLE_ADDR_TYPE* p_addr_type) {
@@ -918,78 +440,22 @@
CHECK(p_addr_type != nullptr);
return false;
}
-/*******************************************************************************
- *
- * Function BTM_SecurityGrant
- *
- * Description This function is called to grant security process.
- *
- * Parameters bd_addr - peer device bd address.
- * res - result of the operation BTM_SUCCESS if success.
- * Otherwise, BTM_REPEATED_ATTEMPTS if too many
- * attempts.
- *
- * Returns None
- *
- ******************************************************************************/
+
void bluetooth::shim::BTM_SecurityGrant(const RawAddress& bd_addr,
uint8_t res) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
}
-/*******************************************************************************
- *
- * Function BTM_BlePasskeyReply
- *
- * Description This function is called after Security Manager submitted
- * passkey request to the application.
- *
- * Parameters: bd_addr - Address of the device for which passkey was
- * requested
- * res - result of the operation BTM_SUCCESS if success
- * key_len - length in bytes of the Passkey
- * p_passkey - pointer to array with the passkey
- * trusted_mask - bitwise OR of trusted services (array of
- * uint32_t)
- *
- ******************************************************************************/
void bluetooth::shim::BTM_BlePasskeyReply(const RawAddress& bd_addr,
uint8_t res, uint32_t passkey) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
}
-/*******************************************************************************
- *
- * Function BTM_BleConfirmReply
- *
- * Description This function is called after Security Manager submitted
- * numeric comparison request to the application.
- *
- * Parameters: bd_addr - Address of the device with which numeric
- * comparison was requested
- * res - comparison result BTM_SUCCESS if success
- *
- ******************************************************************************/
void bluetooth::shim::BTM_BleConfirmReply(const RawAddress& bd_addr,
uint8_t res) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
}
-/*******************************************************************************
- *
- * Function BTM_BleOobDataReply
- *
- * Description This function is called to provide the OOB data for
- * SMP in response to BTM_LE_OOB_REQ_EVT
- *
- * Parameters: bd_addr - Address of the peer device
- * res - result of the operation SMP_SUCCESS if success
- * p_data - oob data, depending on transport and
- * capabilities.
- * Might be "Simple Pairing Randomizer", or
- * "Security Manager TK Value".
- *
- ******************************************************************************/
void bluetooth::shim::BTM_BleOobDataReply(const RawAddress& bd_addr,
uint8_t res, uint8_t len,
uint8_t* p_data) {
@@ -997,19 +463,6 @@
CHECK(p_data != nullptr);
}
-/*******************************************************************************
- *
- * Function BTM_BleSecureConnectionOobDataReply
- *
- * Description This function is called to provide the OOB data for
- * SMP in response to BTM_LE_OOB_REQ_EVT when secure connection
- * data is available
- *
- * Parameters: bd_addr - Address of the peer device
- * p_c - pointer to Confirmation.
- * p_r - pointer to Randomizer
- *
- ******************************************************************************/
void bluetooth::shim::BTM_BleSecureConnectionOobDataReply(
const RawAddress& bd_addr, uint8_t* p_c, uint8_t* p_r) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
@@ -1017,40 +470,11 @@
CHECK(p_r != nullptr);
}
-/******************************************************************************
- *
- * Function BTM_BleSetConnScanParams
- *
- * Description Set scan parameter used in BLE connection request
- *
- * Parameters: scan_interval: scan interval
- * scan_window: scan window
- *
- * Returns void
- *
- ******************************************************************************/
void bluetooth::shim::BTM_BleSetConnScanParams(uint32_t scan_interval,
uint32_t scan_window) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
}
-/********************************************************
- *
- * Function BTM_BleSetPrefConnParams
- *
- * Description Set a peripheral's preferred connection parameters
- *
- * Parameters: bd_addr - BD address of the peripheral
- * scan_interval: scan interval
- * scan_window: scan window
- * min_conn_int - minimum preferred connection interval
- * max_conn_int - maximum preferred connection interval
- * slave_latency - preferred slave latency
- * supervision_tout - preferred supervision timeout
- *
- * Returns void
- *
- ******************************************************************************/
void bluetooth::shim::BTM_BleSetPrefConnParams(const RawAddress& bd_addr,
uint16_t min_conn_int,
uint16_t max_conn_int,
@@ -1059,18 +483,6 @@
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
}
-/*******************************************************************************
- *
- * Function BTM_ReadDevInfo
- *
- * Description This function is called to read the device/address type
- * of BD address.
- *
- * Parameter remote_bda: remote device address
- * p_dev_type: output parameter to read the device type.
- * p_addr_type: output parameter to read the address type.
- *
- ******************************************************************************/
void bluetooth::shim::BTM_ReadDevInfo(const RawAddress& remote_bda,
tBT_DEVICE_TYPE* p_dev_type,
tBLE_ADDR_TYPE* p_addr_type) {
@@ -1079,20 +491,6 @@
CHECK(p_addr_type != nullptr);
}
-/*******************************************************************************
- *
- * Function BTM_ReadConnectedTransportAddress
- *
- * Description This function is called to read the paired device/address
- * type of other device paired corresponding to the BD_address
- *
- * Parameter remote_bda: remote device address, carry out the transport
- * address
- * transport: active transport
- *
- * Return true if an active link is identified; false otherwise
- *
- ******************************************************************************/
bool bluetooth::shim::BTM_ReadConnectedTransportAddress(
RawAddress* remote_bda, tBT_TRANSPORT transport) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
@@ -1100,35 +498,12 @@
return false;
}
-/*******************************************************************************
- *
- * Function BTM_BleReceiverTest
- *
- * Description This function is called to start the LE Receiver test
- *
- * Parameter rx_freq - Frequency Range
- * p_cmd_cmpl_cback - Command Complete callback
- *
- ******************************************************************************/
void bluetooth::shim::BTM_BleReceiverTest(uint8_t rx_freq,
tBTM_CMPL_CB* p_cmd_cmpl_cback) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
CHECK(p_cmd_cmpl_cback != nullptr);
}
-/*******************************************************************************
- *
- * Function BTM_BleTransmitterTest
- *
- * Description This function is called to start the LE Transmitter test
- *
- * Parameter tx_freq - Frequency Range
- * test_data_len - Length in bytes of payload data in each
- * packet
- * packet_payload - Pattern to use in the payload
- * p_cmd_cmpl_cback - Command Complete callback
- *
- ******************************************************************************/
void bluetooth::shim::BTM_BleTransmitterTest(uint8_t tx_freq,
uint8_t test_data_len,
uint8_t packet_payload,
@@ -1137,81 +512,27 @@
CHECK(p_cmd_cmpl_cback != nullptr);
}
-/*******************************************************************************
- *
- * Function BTM_BleTestEnd
- *
- * Description This function is called to stop the in-progress TX or RX
- * test
- *
- * Parameter p_cmd_cmpl_cback - Command complete callback
- *
- ******************************************************************************/
void bluetooth::shim::BTM_BleTestEnd(tBTM_CMPL_CB* p_cmd_cmpl_cback) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
CHECK(p_cmd_cmpl_cback != nullptr);
}
-/*******************************************************************************
- *
- * Function BTM_UseLeLink
- *
- * Description This function is to select the underlying physical link to
- * use.
- *
- * Returns true to use LE, false use BR/EDR.
- *
- ******************************************************************************/
bool bluetooth::shim::BTM_UseLeLink(const RawAddress& raw_address) {
return shim_btm.IsLeAclConnected(raw_address);
}
-/*******************************************************************************
- *
- * Function BTM_SetBleDataLength
- *
- * Description This function is to set maximum BLE transmission packet size
- *
- * Returns BTM_SUCCESS if success; otherwise failed.
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_SetBleDataLength(const RawAddress& bd_addr,
uint16_t tx_pdu_length) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
return BTM_NO_RESOURCES;
}
-/*******************************************************************************
- *
- * Function BTM_BleReadPhy
- *
- * Description To read the current PHYs for specified LE connection
- *
- *
- * Returns BTM_SUCCESS if command successfully sent to controller,
- * BTM_MODE_UNSUPPORTED if local controller doesn't support LE
- * 2M or LE Coded PHY,
- * BTM_WRONG_MODE if Device in wrong mode for request.
- *
- ******************************************************************************/
void bluetooth::shim::BTM_BleReadPhy(
const RawAddress& bd_addr,
base::Callback<void(uint8_t tx_phy, uint8_t rx_phy, uint8_t status)> cb) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
}
-/*******************************************************************************
- *
- * Function BTM_BleSetDefaultPhy
- *
- * Description To set preferred PHY for ensuing LE connections
- *
- *
- * Returns BTM_SUCCESS if command successfully sent to controller,
- * BTM_MODE_UNSUPPORTED if local controller doesn't support LE
- * 2M or LE Coded PHY
- *
- ******************************************************************************/
tBTM_STATUS bluetooth::shim::BTM_BleSetDefaultPhy(uint8_t all_phys,
uint8_t tx_phys,
uint8_t rx_phys) {
@@ -1219,42 +540,11 @@
return BTM_NO_RESOURCES;
}
-/*******************************************************************************
- *
- * Function BTM_BleSetPhy
- *
- * Description To set PHY preferences for specified LE connection
- *
- *
- * Returns BTM_SUCCESS if command successfully sent to controller,
- * BTM_MODE_UNSUPPORTED if local controller doesn't support LE
- * 2M or LE Coded PHY,
- * BTM_ILLEGAL_VALUE if specified remote doesn't support LE 2M
- * or LE Coded PHY,
- * BTM_WRONG_MODE if Device in wrong mode for request.
- *
- ******************************************************************************/
void bluetooth::shim::BTM_BleSetPhy(const RawAddress& bd_addr, uint8_t tx_phys,
uint8_t rx_phys, uint16_t phy_options) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
}
-/*******************************************************************************
- *
- * Function BTM_BleDataSignature
- *
- * Description This function is called to sign the data using AES128 CMAC
- * algorith.
- *
- * Parameter bd_addr: target device the data to be signed for.
- * p_text: singing data
- * len: length of the data to be signed.
- * signature: output parameter where data signature is going to
- * be stored.
- *
- * Returns true if signing sucessul, otherwise false.
- *
- ******************************************************************************/
bool bluetooth::shim::BTM_BleDataSignature(const RawAddress& bd_addr,
uint8_t* p_text, uint16_t len,
BLE_SIGNATURE signature) {
@@ -1263,21 +553,6 @@
return false;
}
-/*******************************************************************************
- *
- * Function BTM_BleVerifySignature
- *
- * Description This function is called to verify the data signature
- *
- * Parameter bd_addr: target device the data to be signed for.
- * p_orig: original data before signature.
- * len: length of the signing data
- * counter: counter used when doing data signing
- * p_comp: signature to be compared against.
-
- * Returns true if signature verified correctly; otherwise false.
- *
- ******************************************************************************/
bool bluetooth::shim::BTM_BleVerifySignature(const RawAddress& bd_addr,
uint8_t* p_orig, uint16_t len,
uint32_t counter,
@@ -1288,16 +563,6 @@
return false;
}
-/*******************************************************************************
- *
- * Function BTM_GetLeSecurityState
- *
- * Description This function is called to get security mode 1 flags and
- * encryption key size for LE peer.
- *
- * Returns bool true if LE device is found, false otherwise.
- *
- ******************************************************************************/
bool bluetooth::shim::BTM_GetLeSecurityState(const RawAddress& bd_addr,
uint8_t* p_le_dev_sec_flags,
uint8_t* p_le_key_size) {
@@ -1307,34 +572,12 @@
return false;
}
-/*******************************************************************************
- *
- * Function BTM_BleSecurityProcedureIsRunning
- *
- * Description This function indicates if LE security procedure is
- * currently running with the peer.
- *
- * Returns bool true if security procedure is running, false
- * otherwise.
- *
- ******************************************************************************/
bool bluetooth::shim::BTM_BleSecurityProcedureIsRunning(
const RawAddress& bd_addr) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
return false;
}
-/*******************************************************************************
- *
- * Function BTM_BleGetSupportedKeySize
- *
- * Description This function gets the maximum encryption key size in bytes
- * the local device can suport.
- * record.
- *
- * Returns the key size or 0 if the size can't be retrieved.
- *
- ******************************************************************************/
uint8_t bluetooth::shim::BTM_BleGetSupportedKeySize(const RawAddress& bd_addr) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
return 0;
@@ -1405,7 +648,16 @@
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
}
+void bluetooth::shim::BTM_BleUpdateAdvFilterPolicy(tBTM_BLE_AFP adv_policy) {
+ LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
+}
+
void bluetooth::shim::BTM_BleEnableDisableFilterFeature(
uint8_t enable, tBTM_BLE_PF_STATUS_CBACK p_stat_cback) {
LOG_INFO(LOG_TAG, "UNIMPLEMENTED %s", __func__);
}
+
+uint8_t bluetooth::shim::BTM_BleMaxMultiAdvInstanceCount() {
+ // TODO(cmanton) Connect this to the gd side
+ return 5;
+}
diff --git a/main/shim/btm_api.h b/main/shim/btm_api.h
index 6cd1fc4..905fcfa 100644
--- a/main/shim/btm_api.h
+++ b/main/shim/btm_api.h
@@ -24,6 +24,1016 @@
/*******************************************************************************
*
+ * Function BTM_StartInquiry
+ *
+ * Description This function is called to start an inquiry.
+ *
+ * Parameters: p_inqparms - pointer to the inquiry information
+ * mode - GENERAL or LIMITED inquiry
+ * duration - length in 1.28 sec intervals (If '0', the
+ * inquiry is CANCELLED)
+ * max_resps - maximum amount of devices to search for
+ * before ending the inquiry
+ * filter_cond_type - BTM_CLR_INQUIRY_FILTER,
+ * BTM_FILTER_COND_DEVICE_CLASS, or
+ * BTM_FILTER_COND_BD_ADDR
+ * filter_cond - value for the filter (based on
+ * filter_cond_type)
+ *
+ * p_results_cb - Pointer to the callback routine which gets
+ * called upon receipt of an inquiry result. If
+ * this field is NULL, the application is not
+ * notified.
+ *
+ * p_cmpl_cb - Pointer to the callback routine which gets
+ * called upon completion. If this field is
+ * NULL, the application is not notified when
+ * completed.
+ * Returns tBTM_STATUS
+ * BTM_CMD_STARTED if successfully initiated
+ * BTM_BUSY if already in progress
+ * BTM_ILLEGAL_VALUE if parameter(s) are out of range
+ * BTM_NO_RESOURCES if could not allocate resources to start
+ * the command
+ * BTM_WRONG_MODE if the device is not up.
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_StartInquiry(tBTM_INQ_PARMS* p_inqparms,
+ tBTM_INQ_RESULTS_CB* p_results_cb,
+ tBTM_CMPL_CB* p_cmpl_cb);
+
+/*******************************************************************************
+ *
+ * Function BTM_SetPeriodicInquiryMode
+ *
+ * Description This function is called to set the device periodic inquiry
+ * mode. If the duration is zero, the periodic inquiry mode is
+ * cancelled.
+ *
+ * Parameters: p_inqparms - pointer to the inquiry information
+ * mode - GENERAL or LIMITED inquiry
+ * duration - length in 1.28 sec intervals (If '0', the
+ * inquiry is CANCELLED)
+ * max_resps - maximum amount of devices to search for
+ * before ending the inquiry
+ * filter_cond_type - BTM_CLR_INQUIRY_FILTER,
+ * BTM_FILTER_COND_DEVICE_CLASS, or
+ * BTM_FILTER_COND_BD_ADDR
+ * filter_cond - value for the filter (based on
+ * filter_cond_type)
+ *
+ * max_delay - maximum amount of time between successive
+ * inquiries
+ * min_delay - minimum amount of time between successive
+ * inquiries
+ * p_results_cb - callback returning pointer to results
+ * (tBTM_INQ_RESULTS)
+ *
+ * Returns BTM_CMD_STARTED if successfully started
+ * BTM_ILLEGAL_VALUE if a bad parameter is detected
+ * BTM_NO_RESOURCES if could not allocate a message buffer
+ * BTM_SUCCESS - if cancelling the periodic inquiry
+ * BTM_BUSY - if an inquiry is already active
+ * BTM_WRONG_MODE if the device is not up.
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_SetPeriodicInquiryMode(tBTM_INQ_PARMS* p_inqparms,
+ uint16_t max_delay, uint16_t min_delay,
+ tBTM_INQ_RESULTS_CB* p_results_cb);
+
+/*******************************************************************************
+ *
+ * Function BTM_SetDiscoverability
+ *
+ * Description This function is called to set the device into or out of
+ * discoverable mode. Discoverable mode means inquiry
+ * scans are enabled. If a value of '0' is entered for window
+ * or interval, the default values are used.
+ *
+ * Returns BTM_SUCCESS if successful
+ * BTM_BUSY if a setting of the filter is already in progress
+ * BTM_NO_RESOURCES if couldn't get a memory pool buffer
+ * BTM_ILLEGAL_VALUE if a bad parameter was detected
+ * BTM_WRONG_MODE if the device is not up.
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_SetDiscoverability(uint16_t inq_mode, uint16_t window,
+ uint16_t interval);
+
+/*******************************************************************************
+ *
+ * Function BTM_SetInquiryScanType
+ *
+ * Description This function is called to set the iquiry scan-type to
+ * standard or interlaced.
+ *
+ * Input Params: BTM_SCAN_TYPE_STANDARD or BTM_SCAN_TYPE_INTERLACED
+ *
+ * Returns BTM_SUCCESS if successful
+ * BTM_MODE_UNSUPPORTED if not a 1.2 device
+ * BTM_WRONG_MODE if the device is not up.
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_SetInquiryScanType(uint16_t scan_type);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleObserve
+ *
+ * Description This procedure keep the device listening for advertising
+ * events from a broadcast device.
+ *
+ * Parameters start: start or stop observe.
+ *
+ * Returns void
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_BleObserve(bool start, uint8_t duration,
+ tBTM_INQ_RESULTS_CB* p_results_cb,
+ tBTM_CMPL_CB* p_cmpl_cb);
+
+/*******************************************************************************
+ *
+ * Function BTM_SetPageScanType
+ *
+ * Description This function is called to set the page scan-type to
+ * standard or interlaced.
+ *
+ * Input Params: BTM_SCAN_TYPE_STANDARD or BTM_SCAN_TYPE_INTERLACED
+ *
+ * Returns BTM_SUCCESS if successful
+ * BTM_MODE_UNSUPPORTED if not a 1.2 device
+ * BTM_WRONG_MODE if the device is not up.
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_SetPageScanType(uint16_t scan_type);
+
+/*******************************************************************************
+ *
+ * Function BTM_SetInquiryMode
+ *
+ * Description This function is called to set standard, with RSSI
+ * mode or extended of the inquiry for local device.
+ *
+ * Input Params: BTM_INQ_RESULT_STANDARD, BTM_INQ_RESULT_WITH_RSSI or
+ * BTM_INQ_RESULT_EXTENDED
+ *
+ * Returns BTM_SUCCESS if successful
+ * BTM_NO_RESOURCES if couldn't get a memory pool buffer
+ * BTM_ILLEGAL_VALUE if a bad parameter was detected
+ * BTM_WRONG_MODE if the device is not up.
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_SetInquiryMode(uint8_t mode);
+
+/*******************************************************************************
+ *
+ * Function BTM_ReadDiscoverability
+ *
+ * Description This function is called to read the current discoverability
+ * mode of the device.
+ *
+ * Output Params: p_window - current inquiry scan duration
+ * p_interval - current inquiry scan interval
+ *
+ * Returns BTM_NON_DISCOVERABLE, BTM_LIMITED_DISCOVERABLE, or
+ * BTM_GENERAL_DISCOVERABLE
+ *
+ ******************************************************************************/
+uint16_t BTM_ReadDiscoverability(uint16_t* p_window, uint16_t* p_interval);
+
+/*******************************************************************************
+ *
+ * Function BTM_CancelPeriodicInquiry
+ *
+ * Description This function cancels a periodic inquiry
+ *
+ * Returns
+ * BTM_NO_RESOURCES if could not allocate a message buffer
+ * BTM_SUCCESS - if cancelling the periodic inquiry
+ * BTM_WRONG_MODE if the device is not up.
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_CancelPeriodicInquiry(void);
+
+/*******************************************************************************
+ *
+ * Function BTM_SetConnectability
+ *
+ * Description This function is called to set the device into or out of
+ * connectable mode. Discoverable mode means page scans are
+ * enabled.
+ *
+ * Returns BTM_SUCCESS if successful
+ * BTM_ILLEGAL_VALUE if a bad parameter is detected
+ * BTM_NO_RESOURCES if could not allocate a message buffer
+ * BTM_WRONG_MODE if the device is not up.
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_SetConnectability(uint16_t page_mode, uint16_t window,
+ uint16_t interval);
+
+/*******************************************************************************
+ *
+ * Function BTM_ReadConnectability
+ *
+ * Description This function is called to read the current discoverability
+ * mode of the device.
+ * Output Params p_window - current page scan duration
+ * p_interval - current time between page scans
+ *
+ * Returns BTM_NON_CONNECTABLE or BTM_CONNECTABLE
+ *
+ ******************************************************************************/
+uint16_t BTM_ReadConnectability(uint16_t* p_window, uint16_t* p_interval);
+
+/*******************************************************************************
+ *
+ * Function BTM_IsInquiryActive
+ *
+ * Description Return a bit mask of the current inquiry state
+ *
+ * Returns BTM_INQUIRY_INACTIVE if inactive (0)
+ * BTM_LIMITED_INQUIRY_ACTIVE if a limted inquiry is active
+ * BTM_GENERAL_INQUIRY_ACTIVE if a general inquiry is active
+ * BTM_PERIODIC_INQUIRY_ACTIVE if a periodic inquiry is active
+ *
+ ******************************************************************************/
+uint16_t BTM_IsInquiryActive(void);
+
+/*******************************************************************************
+ *
+ * Function BTM_CancelInquiry
+ *
+ * Description This function cancels an inquiry if active
+ *
+ * Returns BTM_SUCCESS if successful
+ * BTM_NO_RESOURCES if could not allocate a message buffer
+ * BTM_WRONG_MODE if the device is not up.
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_CancelInquiry(void);
+
+/*******************************************************************************
+ *
+ * Function BTM_ReadRemoteDeviceName
+ *
+ * Description This function initiates a remote device HCI command to the
+ * controller and calls the callback when the process has
+ * completed.
+ *
+ * Input Params: remote_bda - device address of name to retrieve
+ * p_cb - callback function called when
+ * BTM_CMD_STARTED is returned.
+ * A pointer to tBTM_REMOTE_DEV_NAME is
+ * passed to the callback.
+ *
+ * Returns
+ * BTM_CMD_STARTED is returned if the request was successfully
+ * sent to HCI.
+ * BTM_BUSY if already in progress
+ * BTM_UNKNOWN_ADDR if device address is bad
+ * BTM_NO_RESOURCES if resources could not be allocated to
+ * start the command
+ * BTM_WRONG_MODE if the device is not up.
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_ReadRemoteDeviceName(const RawAddress& remote_bda,
+ tBTM_CMPL_CB* p_cb,
+ tBT_TRANSPORT transport);
+
+/*******************************************************************************
+ *
+ * Function BTM_CancelRemoteDeviceName
+ *
+ * Description This function initiates the cancel request for the specified
+ * remote device.
+ *
+ * Input Params: None
+ *
+ * Returns
+ * BTM_CMD_STARTED is returned if the request was successfully
+ * sent to HCI.
+ * BTM_NO_RESOURCES if resources could not be allocated to
+ * start the command
+ * BTM_WRONG_MODE if there is no active remote name request.
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_CancelRemoteDeviceName(void);
+
+/*******************************************************************************
+ *
+ * Function BTM_InqDbRead
+ *
+ * Description This function looks through the inquiry database for a match
+ * based on Bluetooth Device Address. This is the application's
+ * interface to get the inquiry details of a specific BD
+ * address.
+ *
+ * Returns pointer to entry, or NULL if not found
+ *
+ ******************************************************************************/
+tBTM_INQ_INFO* BTM_InqDbRead(const RawAddress& p_bda);
+
+/*******************************************************************************
+ *
+ * Function BTM_InqDbFirst
+ *
+ * Description This function looks through the inquiry database for the
+ * first used entry, and returns that. This is used in
+ * conjunction with BTM_InqDbNext by applications as a way to
+ * walk through the inquiry database.
+ *
+ * Returns pointer to first in-use entry, or NULL if DB is empty
+ *
+ ******************************************************************************/
+tBTM_INQ_INFO* BTM_InqDbFirst(void);
+
+/*******************************************************************************
+ *
+ * Function BTM_InqDbNext
+ *
+ * Description This function looks through the inquiry database for the
+ * next used entry, and returns that. If the input parameter
+ * is NULL, the first entry is returned.
+ *
+ * Returns pointer to next in-use entry, or NULL if no more found.
+ *
+ ******************************************************************************/
+tBTM_INQ_INFO* BTM_InqDbNext(tBTM_INQ_INFO* p_cur);
+
+/*******************************************************************************
+ *
+ * Function BTM_ClearInqDb
+ *
+ * Description This function is called to clear out a device or all devices
+ * from the inquiry database.
+ *
+ * Parameter p_bda - (input) BD_ADDR -> Address of device to clear
+ * (NULL clears all entries)
+ *
+ * Returns BTM_BUSY if an inquiry, get remote name, or event filter
+ * is active, otherwise BTM_SUCCESS
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_ClearInqDb(const RawAddress* p_bda);
+
+/*******************************************************************************
+ *
+ * Function BTM_ReadInquiryRspTxPower
+ *
+ * Description This command will read the inquiry Transmit Power level used
+ * to transmit the FHS and EIR data packets.
+ * This can be used directly in the Tx Power Level EIR data
+ * type.
+ *
+ * Returns BTM_SUCCESS if successful
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_ReadInquiryRspTxPower(tBTM_CMPL_CB* p_cb);
+
+/*******************************************************************************
+ *
+ * Function BTM_WriteEIR
+ *
+ * Description This function is called to write EIR data to controller.
+ *
+ * Parameters p_buff - allocated HCI command buffer including extended
+ * inquriry response
+ *
+ * Returns BTM_SUCCESS - if successful
+ * BTM_MODE_UNSUPPORTED - if local device cannot support it
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_WriteEIR(BT_HDR* p_buff);
+
+/*******************************************************************************
+ *
+ * Function BTM_HasEirService
+ *
+ * Description This function is called to know if UUID in bit map of UUID.
+ *
+ * Parameters p_eir_uuid - bit map of UUID list
+ * uuid16 - UUID 16-bit
+ *
+ * Returns true - if found
+ * false - if not found
+ *
+ ******************************************************************************/
+bool BTM_HasEirService(const uint32_t* p_eir_uuid, uint16_t uuid16);
+
+/*******************************************************************************
+ *
+ * Function BTM_HasInquiryEirService
+ *
+ * Description Return if a UUID is in the bit map of a UUID list.
+ *
+ * Parameters p_results - inquiry results
+ * uuid16 - UUID 16-bit
+ *
+ * Returns BTM_EIR_FOUND - if found
+ * BTM_EIR_NOT_FOUND - if not found and it is a complete list
+ * BTM_EIR_UNKNOWN - if not found and it is not complete list
+ *
+ ******************************************************************************/
+tBTM_EIR_SEARCH_RESULT BTM_HasInquiryEirService(tBTM_INQ_RESULTS* p_results,
+ uint16_t uuid16);
+
+/*******************************************************************************
+ *
+ * Function BTM_AddEirService
+ *
+ * Description This function is called to add a service in the bit map UUID
+ * list.
+ *
+ * Parameters p_eir_uuid - bit mask of UUID list for EIR
+ * uuid16 - UUID 16-bit
+ *
+ * Returns None
+ *
+ ******************************************************************************/
+void BTM_AddEirService(uint32_t* p_eir_uuid, uint16_t uuid16);
+
+/*******************************************************************************
+ *
+ * Function BTM_RemoveEirService
+ *
+ * Description This function is called to remove a service from the bit map
+ * UUID list.
+ *
+ * Parameters p_eir_uuid - bit mask of UUID list for EIR
+ * uuid16 - UUID 16-bit
+ *
+ * Returns None
+ *
+ ******************************************************************************/
+void BTM_RemoveEirService(uint32_t* p_eir_uuid, uint16_t uuid16);
+
+/*******************************************************************************
+ *
+ * Function BTM_GetEirSupportedServices
+ *
+ * Description This function is called to get UUID list from bit map UUID
+ * list.
+ *
+ * Parameters p_eir_uuid - bit mask of UUID list for EIR
+ * p - reference of current pointer of EIR
+ * max_num_uuid16 - max number of UUID can be written in EIR
+ * num_uuid16 - number of UUID have been written in EIR
+ *
+ * Returns BTM_EIR_MORE_16BITS_UUID_TYPE, if it has more than max
+ * BTM_EIR_COMPLETE_16BITS_UUID_TYPE, otherwise
+ *
+ ******************************************************************************/
+uint8_t BTM_GetEirSupportedServices(uint32_t* p_eir_uuid, uint8_t** p,
+ uint8_t max_num_uuid16,
+ uint8_t* p_num_uuid16);
+
+/*******************************************************************************
+ *
+ * Function BTM_GetEirUuidList
+ *
+ * Description This function parses EIR and returns UUID list.
+ *
+ * Parameters p_eir - EIR
+ * eirl_len - EIR len
+ * uuid_size - Uuid::kNumBytes16, Uuid::kNumBytes32,
+ * Uuid::kNumBytes128
+ * p_num_uuid - return number of UUID in found list
+ * p_uuid_list - return UUID 16-bit list
+ * max_num_uuid - maximum number of UUID to be returned
+ *
+ * Returns 0 - if not found
+ * BTM_EIR_COMPLETE_16BITS_UUID_TYPE
+ * BTM_EIR_MORE_16BITS_UUID_TYPE
+ * BTM_EIR_COMPLETE_32BITS_UUID_TYPE
+ * BTM_EIR_MORE_32BITS_UUID_TYPE
+ * BTM_EIR_COMPLETE_128BITS_UUID_TYPE
+ * BTM_EIR_MORE_128BITS_UUID_TYPE
+ *
+ ******************************************************************************/
+uint8_t BTM_GetEirUuidList(uint8_t* p_eir, size_t eir_len, uint8_t uuid_size,
+ uint8_t* p_num_uuid, uint8_t* p_uuid_list,
+ uint8_t max_num_uuid);
+
+/*******************************************************************************
+ *
+ * Function BTM_SecAddBleDevice
+ *
+ * Description Add/modify device. This function will be normally called
+ * during host startup to restore all required information
+ * for a LE device stored in the NVRAM.
+ *
+ * Parameters: bd_addr - BD address of the peer
+ * bd_name - Name of the peer device. NULL if unknown.
+ * dev_type - Remote device's device type.
+ * addr_type - LE device address type.
+ *
+ * Returns true if added OK, else false
+ *
+ ******************************************************************************/
+bool BTM_SecAddBleDevice(const RawAddress& bd_addr, BD_NAME bd_name,
+ tBT_DEVICE_TYPE dev_type, tBLE_ADDR_TYPE addr_type);
+
+/*******************************************************************************
+ *
+ * Function BTM_SecAddBleKey
+ *
+ * Description Add/modify LE device information. This function will be
+ * normally called during host startup to restore all required
+ * information stored in the NVRAM.
+ *
+ * Parameters: bd_addr - BD address of the peer
+ * p_le_key - LE key values.
+ * key_type - LE SMP key type.
+ *
+ * Returns true if added OK, else false
+ *
+ ******************************************************************************/
+bool BTM_SecAddBleKey(const RawAddress& bd_addr, tBTM_LE_KEY_VALUE* p_le_key,
+ tBTM_LE_KEY_TYPE key_type);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleLoadLocalKeys
+ *
+ * Description Local local identity key, encryption root or sign counter.
+ *
+ * Parameters: key_type: type of key, can be BTM_BLE_KEY_TYPE_ID,
+ * BTM_BLE_KEY_TYPE_ER
+ * or BTM_BLE_KEY_TYPE_COUNTER.
+ * p_key: pointer to the key.
+ *
+ * Returns non2.
+ *
+ ******************************************************************************/
+void BTM_BleLoadLocalKeys(uint8_t key_type, tBTM_BLE_LOCAL_KEYS* p_key);
+
+/** Returns local device encryption root (ER) */
+const Octet16& BTM_GetDeviceEncRoot();
+
+/** Returns local device identity root (IR) */
+const Octet16& BTM_GetDeviceIDRoot();
+
+/** Return local device DHK. */
+const Octet16& BTM_GetDeviceDHK();
+
+/*******************************************************************************
+ *
+ * Function BTM_ReadConnectionAddr
+ *
+ * Description Read the local device random address.
+ *
+ * Returns void
+ *
+ ******************************************************************************/
+void BTM_ReadConnectionAddr(const RawAddress& remote_bda,
+ RawAddress& local_conn_addr,
+ tBLE_ADDR_TYPE* p_addr_type);
+
+/*******************************************************************************
+ *
+ * Function BTM_IsBleConnection
+ *
+ * Description This function is called to check if the connection handle
+ * for an LE link
+ *
+ * Returns true if connection is LE link, otherwise false.
+ *
+ ******************************************************************************/
+bool BTM_IsBleConnection(uint16_t conn_handle);
+
+/*******************************************************************************
+ *
+ * Function BTM_ReadRemoteConnectionAddr
+ *
+ * Description Read the remote device address currently used.
+ *
+ * Returns void
+ *
+ ******************************************************************************/
+bool BTM_ReadRemoteConnectionAddr(const RawAddress& pseudo_addr,
+ RawAddress& conn_addr,
+ tBLE_ADDR_TYPE* p_addr_type);
+
+/*******************************************************************************
+ *
+ * Function BTM_SecurityGrant
+ *
+ * Description This function is called to grant security process.
+ *
+ * Parameters bd_addr - peer device bd address.
+ * res - result of the operation BTM_SUCCESS if success.
+ * Otherwise, BTM_REPEATED_ATTEMPTS is too many
+ * attempts.
+ *
+ * Returns None
+ *
+ ******************************************************************************/
+void BTM_SecurityGrant(const RawAddress& bd_addr, uint8_t res);
+
+/*******************************************************************************
+ *
+ * Function BTM_BlePasskeyReply
+ *
+ * Description This function is called after Security Manager submitted
+ * passkey request to the application.
+ *
+ * Parameters: bd_addr - Address of the device for which passkey was
+ * requested
+ * res - result of the operation SMP_SUCCESS if success
+ * passkey - numeric value in the range of
+ * BTM_MIN_PASSKEY_VAL(0) -
+ * BTM_MAX_PASSKEY_VAL(999999(0xF423F)).
+ *
+ ******************************************************************************/
+void BTM_BlePasskeyReply(const RawAddress& bd_addr, uint8_t res,
+ uint32_t passkey);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleConfirmReply
+ *
+ * Description This function is called after Security Manager submitted
+ * numeric comparison request to the application.
+ *
+ * Parameters: bd_addr - Address of the device with which numeric
+ * comparison was requested
+ * res - comparison result BTM_SUCCESS if success
+ *
+ ******************************************************************************/
+void BTM_BleConfirmReply(const RawAddress& bd_addr, uint8_t res);
+
+/*******************************************************************************
+ *
+ * Function BTM_LeOobDataReply
+ *
+ * Description This function is called to provide the OOB data for
+ * SMP in response to BTM_LE_OOB_REQ_EVT
+ *
+ * Parameters: bd_addr - Address of the peer device
+ * res - result of the operation SMP_SUCCESS if success
+ * p_data - simple pairing Randomizer C.
+ *
+ ******************************************************************************/
+void BTM_BleOobDataReply(const RawAddress& bd_addr, uint8_t res, uint8_t len,
+ uint8_t* p_data);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleSecureConnectionOobDataReply
+ *
+ * Description This function is called to provide the OOB data for
+ * SMP in response to BTM_LE_OOB_REQ_EVT when secure connection
+ * data is available
+ *
+ * Parameters: bd_addr - Address of the peer device
+ * p_c - pointer to Confirmation
+ * p_r - pointer to Randomizer.
+ *
+ ******************************************************************************/
+void BTM_BleSecureConnectionOobDataReply(const RawAddress& bd_addr,
+ uint8_t* p_c, uint8_t* p_r);
+
+/******************************************************************************
+ *
+ * Function BTM_BleSetConnScanParams
+ *
+ * Description Set scan parameters used in BLE connection request
+ *
+ * Parameters: scan_interval - scan interval
+ * scan_window - scan window
+ *
+ * Returns void
+ *
+ ******************************************************************************/
+void BTM_BleSetConnScanParams(uint32_t scan_interval, uint32_t scan_window);
+
+/********************************************************
+ *
+ * Function BTM_BleSetPrefConnParams
+ *
+ * Description Set a peripheral's preferred connection parameters. When
+ * any of the value does not want to be updated while others
+ * do, use BTM_BLE_CONN_PARAM_UNDEF for the ones want to
+ * leave untouched.
+ *
+ * Parameters: bd_addr - BD address of the peripheral
+ * min_conn_int - minimum preferred connection interval
+ * max_conn_int - maximum preferred connection interval
+ * slave_latency - preferred slave latency
+ * supervision_tout - preferred supervision timeout
+ *
+ * Returns void
+ *
+ ******************************************************************************/
+void BTM_BleSetPrefConnParams(const RawAddress& bd_addr, uint16_t min_conn_int,
+ uint16_t max_conn_int, uint16_t slave_latency,
+ uint16_t supervision_tout);
+
+/*******************************************************************************
+ *
+ * Function BTM_ReadDevInfo
+ *
+ * Description This function is called to read the device/address type
+ * of BD address.
+ *
+ * Parameter remote_bda: remote device address
+ * p_dev_type: output parameter to read the device type.
+ * p_addr_type: output parameter to read the address type.
+ *
+ ******************************************************************************/
+void BTM_ReadDevInfo(const RawAddress& remote_bda, tBT_DEVICE_TYPE* p_dev_type,
+ tBLE_ADDR_TYPE* p_addr_type);
+
+/*******************************************************************************
+ *
+ * Function BTM_ReadConnectedTransportAddress
+ *
+ * Description This function is called to read the paired device/address
+ * type of other device paired corresponding to the BD_address
+ *
+ * Parameter remote_bda: remote device address, carry out the transport
+ * address
+ * transport: active transport
+ *
+ * Return true if an active link is identified; false otherwise
+ *
+ ******************************************************************************/
+bool BTM_ReadConnectedTransportAddress(RawAddress* remote_bda,
+ tBT_TRANSPORT transport);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleReceiverTest
+ *
+ * Description This function is called to start the LE Receiver test
+ *
+ * Parameter rx_freq - Frequency Range
+ * p_cmd_cmpl_cback - Command Complete callback
+ *
+ ******************************************************************************/
+void BTM_BleReceiverTest(uint8_t rx_freq, tBTM_CMPL_CB* p_cmd_cmpl_cback);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleTransmitterTest
+ *
+ * Description This function is called to start the LE Transmitter test
+ *
+ * Parameter tx_freq - Frequency Range
+ * test_data_len - Length in bytes of payload data in each
+ * packet
+ * packet_payload - Pattern to use in the payload
+ * p_cmd_cmpl_cback - Command Complete callback
+ *
+ ******************************************************************************/
+void BTM_BleTransmitterTest(uint8_t tx_freq, uint8_t test_data_len,
+ uint8_t packet_payload,
+ tBTM_CMPL_CB* p_cmd_cmpl_cback);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleTestEnd
+ *
+ * Description This function is called to stop the in-progress TX or RX test
+ *
+ * Parameter p_cmd_cmpl_cback - Command complete callback
+ *
+ ******************************************************************************/
+void BTM_BleTestEnd(tBTM_CMPL_CB* p_cmd_cmpl_cback);
+
+/*******************************************************************************
+ *
+ * Function BTM_UseLeLink
+ *
+ * Description Select the underlying physical link to use.
+ *
+ * Returns true to use LE, false use BR/EDR.
+ *
+ ******************************************************************************/
+bool BTM_UseLeLink(const RawAddress& bd_addr);
+
+/*******************************************************************************
+ *
+ * Function BTM_SetBleDataLength
+ *
+ * Description Set the maximum BLE transmission packet size
+ *
+ * Returns BTM_SUCCESS if success; otherwise failed.
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_SetBleDataLength(const RawAddress& bd_addr,
+ uint16_t tx_pdu_length);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleReadPhy
+ *
+ * Description To read the current PHYs for specified LE connection
+ *
+ *
+ * Returns BTM_SUCCESS if success; otherwise failed.
+ *
+ ******************************************************************************/
+void BTM_BleReadPhy(
+ const RawAddress& bd_addr,
+ base::Callback<void(uint8_t tx_phy, uint8_t rx_phy, uint8_t status)> cb);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleSetDefaultPhy
+ *
+ * Description To set preferred PHY for ensuing LE connections
+ *
+ *
+ * Returns BTM_SUCCESS if success; otherwise failed.
+ *
+ ******************************************************************************/
+tBTM_STATUS BTM_BleSetDefaultPhy(uint8_t all_phys, uint8_t tx_phys,
+ uint8_t rx_phys);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleSetPhy
+ *
+ * Description To set PHY preferences for specified LE connection
+ *
+ *
+ * Returns BTM_SUCCESS if success; otherwise failed.
+ * BTM_MODE_UNSUPPORTED if local controller doesn't support LE
+ * 2M or LE Coded PHY,
+ * BTM_ILLEGAL_VALUE if specified remote doesn't support LE 2M
+ * or LE Coded PHY,
+ * BTM_WRONG_MODE if Device in wrong mode for request.
+ *
+ ******************************************************************************/
+void BTM_BleSetPhy(const RawAddress& bd_addr, uint8_t tx_phys, uint8_t rx_phys,
+ uint16_t phy_options);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleDataSignature
+ *
+ * Description This function is called to sign the data using AES128 CMAC
+ * algorith.
+ *
+ * Parameter bd_addr: target device the data to be signed for.
+ * p_text: singing data
+ * len: length of the signing data
+ * signature: output parameter where data signature is going to
+ * be stored.
+ *
+ * Returns true if signing sucessul, otherwise false.
+ *
+ ******************************************************************************/
+bool BTM_BleDataSignature(const RawAddress& bd_addr, uint8_t* p_text,
+ uint16_t len, BLE_SIGNATURE signature);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleVerifySignature
+ *
+ * Description This function is called to verify the data signature
+ *
+ * Parameter bd_addr: target device the data to be signed for.
+ * p_orig: original data before signature.
+ * len: length of the signing data
+ * counter: counter used when doing data signing
+ * p_comp: signature to be compared against.
+
+ * Returns true if signature verified correctly; otherwise false.
+ *
+ ******************************************************************************/
+bool BTM_BleVerifySignature(const RawAddress& bd_addr, uint8_t* p_orig,
+ uint16_t len, uint32_t counter, uint8_t* p_comp);
+
+/*******************************************************************************
+ *
+ * Function BTM_GetLeSecurityState
+ *
+ * Description This function is called to get security mode 1 flags and
+ * encryption key size for LE peer.
+ *
+ * Returns bool true if LE device is found, false otherwise.
+ *
+ ******************************************************************************/
+bool BTM_GetLeSecurityState(const RawAddress& bd_addr,
+ uint8_t* p_le_dev_sec_flags,
+ uint8_t* p_le_key_size);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleSecurityProcedureIsRunning
+ *
+ * Description This function indicates if LE security procedure is
+ * currently running with the peer.
+ *
+ * Returns bool true if security procedure is running, false otherwise.
+ *
+ ******************************************************************************/
+bool BTM_BleSecurityProcedureIsRunning(const RawAddress& bd_addr);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleGetSupportedKeySize
+ *
+ * Description This function gets the maximum encryption key size in bytes
+ * the local device can suport.
+ * record.
+ *
+ * Returns the key size or 0 if the size can't be retrieved.
+ *
+ ******************************************************************************/
+uint8_t BTM_BleGetSupportedKeySize(const RawAddress& bd_addr);
+
+void BTM_LE_PF_local_name(tBTM_BLE_SCAN_COND_OP action,
+ tBTM_BLE_PF_FILT_INDEX filt_index,
+ std::vector<uint8_t> name, tBTM_BLE_PF_CFG_CBACK cb);
+
+void BTM_LE_PF_srvc_data(tBTM_BLE_SCAN_COND_OP action,
+ tBTM_BLE_PF_FILT_INDEX filt_index);
+
+void BTM_LE_PF_manu_data(tBTM_BLE_SCAN_COND_OP action,
+ tBTM_BLE_PF_FILT_INDEX filt_index, uint16_t company_id,
+ uint16_t company_id_mask, std::vector<uint8_t> data,
+ std::vector<uint8_t> data_mask,
+ tBTM_BLE_PF_CFG_CBACK cb);
+
+void BTM_LE_PF_srvc_data_pattern(tBTM_BLE_SCAN_COND_OP action,
+ tBTM_BLE_PF_FILT_INDEX filt_index,
+ std::vector<uint8_t> data,
+ std::vector<uint8_t> data_mask,
+ tBTM_BLE_PF_CFG_CBACK cb);
+
+void BTM_LE_PF_addr_filter(tBTM_BLE_SCAN_COND_OP action,
+ tBTM_BLE_PF_FILT_INDEX filt_index, tBLE_BD_ADDR addr,
+ tBTM_BLE_PF_CFG_CBACK cb);
+
+void BTM_LE_PF_uuid_filter(tBTM_BLE_SCAN_COND_OP action,
+ tBTM_BLE_PF_FILT_INDEX filt_index,
+ tBTM_BLE_PF_COND_TYPE filter_type,
+ const bluetooth::Uuid& uuid,
+ tBTM_BLE_PF_LOGIC_TYPE cond_logic,
+ const bluetooth::Uuid& uuid_mask,
+ tBTM_BLE_PF_CFG_CBACK cb);
+
+void BTM_LE_PF_set(tBTM_BLE_PF_FILT_INDEX filt_index,
+ std::vector<ApcfCommand> commands, tBTM_BLE_PF_CFG_CBACK cb);
+void BTM_LE_PF_clear(tBTM_BLE_PF_FILT_INDEX filt_index,
+ tBTM_BLE_PF_CFG_CBACK cb);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleAdvFilterParamSetup
+ *
+ * Description This function is called to setup the adv data payload filter
+ * condition.
+ *
+ ******************************************************************************/
+void BTM_BleAdvFilterParamSetup(
+ int action, tBTM_BLE_PF_FILT_INDEX filt_index,
+ std::unique_ptr<btgatt_filt_param_setup_t> p_filt_params,
+ tBTM_BLE_PF_PARAM_CB cb);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleUpdateAdvFilterPolicy
+ *
+ * Description This function update the filter policy of advertiser.
+ *
+ * Parameter adv_policy: advertising filter policy
+ *
+ * Return void
+ ******************************************************************************/
+void BTM_BleUpdateAdvFilterPolicy(tBTM_BLE_AFP adv_policy);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleEnableDisableFilterFeature
+ *
+ * Description Enable or disable the APCF feature
+ *
+ * Parameters enable - true - enables APCF, false - disables APCF
+ *
+ ******************************************************************************/
+void BTM_BleEnableDisableFilterFeature(uint8_t enable,
+ tBTM_BLE_PF_STATUS_CBACK p_stat_cback);
+
+/*******************************************************************************
+ *
+ * Function BTM_BleMaxMultiAdvInstanceCount
+ *
+ * Description Returns the maximum number of multi adv instances supported
+ * by the controller.
+ *
+ * Returns Max multi adv instance count
+ *
+ ******************************************************************************/
+uint8_t BTM_BleMaxMultiAdvInstanceCount();
+
+/*******************************************************************************
+ *
* Function BTM_DeviceReset
*
* Description This function is called to reset the controller. The
@@ -241,294 +1251,6 @@
tBTM_STATUS BTM_EnableTestMode(void);
/*******************************************************************************
- * DEVICE DISCOVERY FUNCTIONS - Inquiry, Remote Name, Discovery, Class of Device
- ******************************************************************************/
-
-/*******************************************************************************
- *
- * Function BTM_SetDiscoverability
- *
- * Description This function is called to set the device into or out of
- * discoverable mode. Discoverable mode means inquiry
- * scans are enabled. If a value of '0' is entered for window
- * or interval, the default values are used.
- *
- * Returns BTM_SUCCESS if successful
- * BTM_BUSY if a setting of the filter is already in progress
- * BTM_NO_RESOURCES if couldn't get a memory pool buffer
- * BTM_ILLEGAL_VALUE if a bad parameter was detected
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
-tBTM_STATUS BTM_SetDiscoverability(uint16_t inq_mode, uint16_t window,
- uint16_t interval);
-
-/*******************************************************************************
- *
- * Function BTM_ReadDiscoverability
- *
- * Description This function is called to read the current discoverability
- * mode of the device.
- *
- * Output Params: p_window - current inquiry scan duration
- * p_interval - current inquiry scan interval
- *
- * Returns BTM_NON_DISCOVERABLE, BTM_LIMITED_DISCOVERABLE, or
- * BTM_GENERAL_DISCOVERABLE
- *
- ******************************************************************************/
-uint16_t BTM_ReadDiscoverability(uint16_t* p_window, uint16_t* p_interval);
-
-/*******************************************************************************
- *
- * Function BTM_SetPeriodicInquiryMode
- *
- * Description This function is called to set the device periodic inquiry
- * mode. If the duration is zero, the periodic inquiry mode is
- * cancelled.
- *
- * Parameters: p_inqparms - pointer to the inquiry information
- * mode - GENERAL or LIMITED inquiry
- * duration - length in 1.28 sec intervals (If '0', the
- * inquiry is CANCELLED)
- * max_resps - maximum amount of devices to search for
- * before ending the inquiry
- * filter_cond_type - BTM_CLR_INQUIRY_FILTER,
- * BTM_FILTER_COND_DEVICE_CLASS, or
- * BTM_FILTER_COND_BD_ADDR
- * filter_cond - value for the filter (based on
- * filter_cond_type)
- *
- * max_delay - maximum amount of time between successive
- * inquiries
- * min_delay - minimum amount of time between successive
- * inquiries
- * p_results_cb - callback returning pointer to results
- * (tBTM_INQ_RESULTS)
- *
- * Returns BTM_CMD_STARTED if successfully started
- * BTM_ILLEGAL_VALUE if a bad parameter is detected
- * BTM_NO_RESOURCES if could not allocate a message buffer
- * BTM_SUCCESS - if cancelling the periodic inquiry
- * BTM_BUSY - if an inquiry is already active
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
-tBTM_STATUS BTM_SetPeriodicInquiryMode(tBTM_INQ_PARMS* p_inqparms,
- uint16_t max_delay, uint16_t min_delay,
- tBTM_INQ_RESULTS_CB* p_results_cb);
-
-/*******************************************************************************
- *
- * Function BTM_StartInquiry
- *
- * Description This function is called to start an inquiry.
- *
- * Parameters: p_inqparms - pointer to the inquiry information
- * mode - GENERAL or LIMITED inquiry
- * duration - length in 1.28 sec intervals (If '0', the
- * inquiry is CANCELLED)
- * max_resps - maximum amount of devices to search for
- * before ending the inquiry
- * filter_cond_type - BTM_CLR_INQUIRY_FILTER,
- * BTM_FILTER_COND_DEVICE_CLASS, or
- * BTM_FILTER_COND_BD_ADDR
- * filter_cond - value for the filter (based on
- * filter_cond_type)
- *
- * p_results_cb - Pointer to the callback routine which gets
- * called upon receipt of an inquiry result. If
- * this field is NULL, the application is not
- * notified.
- *
- * p_cmpl_cb - Pointer to the callback routine which gets
- * called upon completion. If this field is
- * NULL, the application is not notified when
- * completed.
- * Returns tBTM_STATUS
- * BTM_CMD_STARTED if successfully initiated
- * BTM_BUSY if already in progress
- * BTM_ILLEGAL_VALUE if parameter(s) are out of range
- * BTM_NO_RESOURCES if could not allocate resources to start
- * the command
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
-tBTM_STATUS BTM_StartInquiry(tBTM_INQ_PARMS* p_inqparms,
- tBTM_INQ_RESULTS_CB* p_results_cb,
- tBTM_CMPL_CB* p_cmpl_cb);
-
-/*******************************************************************************
- *
- * Function BTM_IsInquiryActive
- *
- * Description Return a bit mask of the current inquiry state
- *
- * Returns BTM_INQUIRY_INACTIVE if inactive (0)
- * BTM_LIMITED_INQUIRY_ACTIVE if a limted inquiry is active
- * BTM_GENERAL_INQUIRY_ACTIVE if a general inquiry is active
- * BTM_PERIODIC_INQUIRY_ACTIVE if a periodic inquiry is active
- *
- ******************************************************************************/
-uint16_t BTM_IsInquiryActive(void);
-
-/*******************************************************************************
- *
- * Function BTM_CancelInquiry
- *
- * Description This function cancels an inquiry if active
- *
- * Returns BTM_SUCCESS if successful
- * BTM_NO_RESOURCES if could not allocate a message buffer
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
-tBTM_STATUS BTM_CancelInquiry(void);
-
-/*******************************************************************************
- *
- * Function BTM_CancelPeriodicInquiry
- *
- * Description This function cancels a periodic inquiry
- *
- * Returns
- * BTM_NO_RESOURCES if could not allocate a message buffer
- * BTM_SUCCESS - if cancelling the periodic inquiry
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
-tBTM_STATUS BTM_CancelPeriodicInquiry(void);
-
-/*******************************************************************************
- *
- * Function BTM_SetConnectability
- *
- * Description This function is called to set the device into or out of
- * connectable mode. Discoverable mode means page scans are
- * enabled.
- *
- * Returns BTM_SUCCESS if successful
- * BTM_ILLEGAL_VALUE if a bad parameter is detected
- * BTM_NO_RESOURCES if could not allocate a message buffer
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
-tBTM_STATUS BTM_SetConnectability(uint16_t page_mode, uint16_t window,
- uint16_t interval);
-
-/*******************************************************************************
- *
- * Function BTM_ReadConnectability
- *
- * Description This function is called to read the current discoverability
- * mode of the device.
- * Output Params p_window - current page scan duration
- * p_interval - current time between page scans
- *
- * Returns BTM_NON_CONNECTABLE or BTM_CONNECTABLE
- *
- ******************************************************************************/
-uint16_t BTM_ReadConnectability(uint16_t* p_window, uint16_t* p_interval);
-
-/*******************************************************************************
- *
- * Function BTM_SetInquiryMode
- *
- * Description This function is called to set standard, with RSSI
- * mode or extended of the inquiry for local device.
- *
- * Input Params: BTM_INQ_RESULT_STANDARD, BTM_INQ_RESULT_WITH_RSSI or
- * BTM_INQ_RESULT_EXTENDED
- *
- * Returns BTM_SUCCESS if successful
- * BTM_NO_RESOURCES if couldn't get a memory pool buffer
- * BTM_ILLEGAL_VALUE if a bad parameter was detected
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
-tBTM_STATUS BTM_SetInquiryMode(uint8_t mode);
-
-/*******************************************************************************
- *
- * Function BTM_SetInquiryScanType
- *
- * Description This function is called to set the iquiry scan-type to
- * standard or interlaced.
- *
- * Input Params: BTM_SCAN_TYPE_STANDARD or BTM_SCAN_TYPE_INTERLACED
- *
- * Returns BTM_SUCCESS if successful
- * BTM_MODE_UNSUPPORTED if not a 1.2 device
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
-tBTM_STATUS BTM_SetInquiryScanType(uint16_t scan_type);
-
-/*******************************************************************************
- *
- * Function BTM_SetPageScanType
- *
- * Description This function is called to set the page scan-type to
- * standard or interlaced.
- *
- * Input Params: BTM_SCAN_TYPE_STANDARD or BTM_SCAN_TYPE_INTERLACED
- *
- * Returns BTM_SUCCESS if successful
- * BTM_MODE_UNSUPPORTED if not a 1.2 device
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
-
-tBTM_STATUS BTM_SetPageScanType(uint16_t scan_type);
-
-/*******************************************************************************
- *
- * Function BTM_ReadRemoteDeviceName
- *
- * Description This function initiates a remote device HCI command to the
- * controller and calls the callback when the process has
- * completed.
- *
- * Input Params: remote_bda - device address of name to retrieve
- * p_cb - callback function called when
- * BTM_CMD_STARTED is returned.
- * A pointer to tBTM_REMOTE_DEV_NAME is
- * passed to the callback.
- *
- * Returns
- * BTM_CMD_STARTED is returned if the request was successfully
- * sent to HCI.
- * BTM_BUSY if already in progress
- * BTM_UNKNOWN_ADDR if device address is bad
- * BTM_NO_RESOURCES if resources could not be allocated to
- * start the command
- * BTM_WRONG_MODE if the device is not up.
- *
- ******************************************************************************/
-tBTM_STATUS BTM_ReadRemoteDeviceName(const RawAddress& remote_bda,
- tBTM_CMPL_CB* p_cb,
- tBT_TRANSPORT transport);
-
-/*******************************************************************************
- *
- * Function BTM_CancelRemoteDeviceName
- *
- * Description This function initiates the cancel request for the specified
- * remote device.
- *
- * Input Params: None
- *
- * Returns
- * BTM_CMD_STARTED is returned if the request was successfully
- * sent to HCI.
- * BTM_NO_RESOURCES if resources could not be allocated to
- * start the command
- * BTM_WRONG_MODE if there is no active remote name request.
- *
- ******************************************************************************/
-tBTM_STATUS BTM_CancelRemoteDeviceName(void);
-
-/*******************************************************************************
*
* Function BTM_ReadRemoteVersion
*
@@ -603,77 +1325,6 @@
******************************************************************************/
uint8_t* BTM_ReadAllRemoteFeatures(const RawAddress& addr);
-/*******************************************************************************
- *
- * Function BTM_InqDbRead
- *
- * Description This function looks through the inquiry database for a match
- * based on Bluetooth Device Address. This is the application's
- * interface to get the inquiry details of a specific BD
- * address.
- *
- * Returns pointer to entry, or NULL if not found
- *
- ******************************************************************************/
-tBTM_INQ_INFO* BTM_InqDbRead(const RawAddress& p_bda);
-
-/*******************************************************************************
- *
- * Function BTM_InqDbFirst
- *
- * Description This function looks through the inquiry database for the
- * first used entry, and returns that. This is used in
- * conjunction with BTM_InqDbNext by applications as a way to
- * walk through the inquiry database.
- *
- * Returns pointer to first in-use entry, or NULL if DB is empty
- *
- ******************************************************************************/
-tBTM_INQ_INFO* BTM_InqDbFirst(void);
-
-/*******************************************************************************
- *
- * Function BTM_InqDbNext
- *
- * Description This function looks through the inquiry database for the
- * next used entry, and returns that. If the input parameter
- * is NULL, the first entry is returned.
- *
- * Returns pointer to next in-use entry, or NULL if no more found.
- *
- ******************************************************************************/
-tBTM_INQ_INFO* BTM_InqDbNext(tBTM_INQ_INFO* p_cur);
-
-/*******************************************************************************
- *
- * Function BTM_ClearInqDb
- *
- * Description This function is called to clear out a device or all devices
- * from the inquiry database.
- *
- * Parameter p_bda - (input) BD_ADDR -> Address of device to clear
- * (NULL clears all entries)
- *
- * Returns BTM_BUSY if an inquiry, get remote name, or event filter
- * is active, otherwise BTM_SUCCESS
- *
- ******************************************************************************/
-tBTM_STATUS BTM_ClearInqDb(const RawAddress* p_bda);
-
-/*******************************************************************************
- *
- * Function BTM_ReadInquiryRspTxPower
- *
- * Description This command will read the inquiry Transmit Power level used
- * to transmit the FHS and EIR data packets.
- * This can be used directly in the Tx Power Level EIR data
- * type.
- *
- * Returns BTM_SUCCESS if successful
- *
- ******************************************************************************/
-tBTM_STATUS BTM_ReadInquiryRspTxPower(tBTM_CMPL_CB* p_cb);
-
/*****************************************************************************
* ACL CHANNEL MANAGEMENT FUNCTIONS
****************************************************************************/
@@ -1803,130 +2454,6 @@
tBTM_STATUS BTM_DeleteStoredLinkKey(const RawAddress* bd_addr,
tBTM_CMPL_CB* p_cb);
-/*******************************************************************************
- *
- * Function BTM_WriteEIR
- *
- * Description This function is called to write EIR data to controller.
- *
- * Parameters p_buff - allocated HCI command buffer including extended
- * inquriry response
- *
- * Returns BTM_SUCCESS - if successful
- * BTM_MODE_UNSUPPORTED - if local device cannot support it
- *
- ******************************************************************************/
-tBTM_STATUS BTM_WriteEIR(BT_HDR* p_buff);
-
-/*******************************************************************************
- *
- * Function BTM_HasEirService
- *
- * Description This function is called to know if UUID in bit map of UUID.
- *
- * Parameters p_eir_uuid - bit map of UUID list
- * uuid16 - UUID 16-bit
- *
- * Returns true - if found
- * false - if not found
- *
- ******************************************************************************/
-bool BTM_HasEirService(const uint32_t* p_eir_uuid, uint16_t uuid16);
-
-/*******************************************************************************
- *
- * Function BTM_HasInquiryEirService
- *
- * Description Return if a UUID is in the bit map of a UUID list.
- *
- * Parameters p_results - inquiry results
- * uuid16 - UUID 16-bit
- *
- * Returns BTM_EIR_FOUND - if found
- * BTM_EIR_NOT_FOUND - if not found and it is a complete list
- * BTM_EIR_UNKNOWN - if not found and it is not complete list
- *
- ******************************************************************************/
-tBTM_EIR_SEARCH_RESULT BTM_HasInquiryEirService(tBTM_INQ_RESULTS* p_results,
- uint16_t uuid16);
-
-/*******************************************************************************
- *
- * Function BTM_AddEirService
- *
- * Description This function is called to add a service in the bit map UUID
- * list.
- *
- * Parameters p_eir_uuid - bit mask of UUID list for EIR
- * uuid16 - UUID 16-bit
- *
- * Returns None
- *
- ******************************************************************************/
-void BTM_AddEirService(uint32_t* p_eir_uuid, uint16_t uuid16);
-
-/*******************************************************************************
- *
- * Function BTM_RemoveEirService
- *
- * Description This function is called to remove a service from the bit map
- * UUID list.
- *
- * Parameters p_eir_uuid - bit mask of UUID list for EIR
- * uuid16 - UUID 16-bit
- *
- * Returns None
- *
- ******************************************************************************/
-void BTM_RemoveEirService(uint32_t* p_eir_uuid, uint16_t uuid16);
-
-/*******************************************************************************
- *
- * Function BTM_GetEirSupportedServices
- *
- * Description This function is called to get UUID list from bit map UUID
- * list.
- *
- * Parameters p_eir_uuid - bit mask of UUID list for EIR
- * p - reference of current pointer of EIR
- * max_num_uuid16 - max number of UUID can be written in EIR
- * num_uuid16 - number of UUID have been written in EIR
- *
- * Returns BTM_EIR_MORE_16BITS_UUID_TYPE, if it has more than max
- * BTM_EIR_COMPLETE_16BITS_UUID_TYPE, otherwise
- *
- ******************************************************************************/
-uint8_t BTM_GetEirSupportedServices(uint32_t* p_eir_uuid, uint8_t** p,
- uint8_t max_num_uuid16,
- uint8_t* p_num_uuid16);
-
-/*******************************************************************************
- *
- * Function BTM_GetEirUuidList
- *
- * Description This function parses EIR and returns UUID list.
- *
- * Parameters p_eir - EIR
- * eirl_len - EIR len
- * uuid_size - Uuid::kNumBytes16, Uuid::kNumBytes32,
- * Uuid::kNumBytes128
- * p_num_uuid - return number of UUID in found list
- * p_uuid_list - return UUID 16-bit list
- * max_num_uuid - maximum number of UUID to be returned
- *
- * Returns 0 - if not found
- * BTM_EIR_COMPLETE_16BITS_UUID_TYPE
- * BTM_EIR_MORE_16BITS_UUID_TYPE
- * BTM_EIR_COMPLETE_32BITS_UUID_TYPE
- * BTM_EIR_MORE_32BITS_UUID_TYPE
- * BTM_EIR_COMPLETE_128BITS_UUID_TYPE
- * BTM_EIR_MORE_128BITS_UUID_TYPE
- *
- ******************************************************************************/
-uint8_t BTM_GetEirUuidList(uint8_t* p_eir, size_t eir_len, uint8_t uuid_size,
- uint8_t* p_num_uuid, uint8_t* p_uuid_list,
- uint8_t max_num_uuid);
-
/*****************************************************************************
* SCO OVER HCI
****************************************************************************/
@@ -2024,43 +2551,6 @@
*/
/*******************************************************************************
*
- * Function BTM_SecAddBleDevice
- *
- * Description Add/modify device. This function will be normally called
- * during host startup to restore all required information
- * for a LE device stored in the NVRAM.
- *
- * Parameters: bd_addr - BD address of the peer
- * bd_name - Name of the peer device. NULL if unknown.
- * dev_type - Remote device's device type.
- * addr_type - LE device address type.
- *
- * Returns true if added OK, else false
- *
- ******************************************************************************/
-bool BTM_SecAddBleDevice(const RawAddress& bd_addr, BD_NAME bd_name,
- tBT_DEVICE_TYPE dev_type, tBLE_ADDR_TYPE addr_type);
-
-/*******************************************************************************
- *
- * Function BTM_SecAddBleKey
- *
- * Description Add/modify LE device information. This function will be
- * normally called during host startup to restore all required
- * information stored in the NVRAM.
- *
- * Parameters: bd_addr - BD address of the peer
- * p_le_key - LE key values.
- * key_type - LE SMP key type.
- *
- * Returns true if added OK, else false
- *
- ******************************************************************************/
-bool BTM_SecAddBleKey(const RawAddress& bd_addr, tBTM_LE_KEY_VALUE* p_le_key,
- tBTM_LE_KEY_TYPE key_type);
-
-/*******************************************************************************
- *
* Function BTM_BleObtainVendorCapabilities
*
* Description This function is called to obatin vendor capabilties
@@ -2092,6 +2582,7 @@
*
******************************************************************************/
void BTM_BleGetVendorCapabilities(tBTM_BLE_VSC_CB* p_cmn_vsc_cb);
+
/*******************************************************************************
*
* Function BTM_BleSetStorageConfig
@@ -2100,13 +2591,10 @@
* setup callbacks.
*
* Parameters uint8_t batch_scan_full_max -Batch scan full maximum
- uint8_t batch_scan_trunc_max - Batch scan truncated value
- maximum
- uint8_t batch_scan_notify_threshold - Threshold value
- cb - Setup callback
- tBTM_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback -Threshold
- callback
- void *p_ref - Reference value
+ * uint8_t batch_scan_trunc_max - Batch scan truncated value
+ *maximum uint8_t batch_scan_notify_threshold - Threshold value cb - Setup
+ *callback tBTM_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback -Threshold callback void
+ **p_ref - Reference value
*
*
******************************************************************************/
@@ -2149,237 +2637,6 @@
void BTM_BleWriteScanRsp(uint8_t* data, uint8_t length,
tBTM_BLE_ADV_DATA_CMPL_CBACK* p_adv_data_cback);
-/*******************************************************************************
- *
- * Function BTM_BleObserve
- *
- * Description This procedure keep the device listening for advertising
- * events from a broadcast device.
- *
- * Parameters start: start or stop observe.
- *
- * Returns void
- *
- ******************************************************************************/
-tBTM_STATUS BTM_BleObserve(bool start, uint8_t duration,
- tBTM_INQ_RESULTS_CB* p_results_cb,
- tBTM_CMPL_CB* p_cmpl_cb);
-
-/** Returns local device encryption root (ER) */
-const Octet16& BTM_GetDeviceEncRoot();
-
-/** Returns local device identity root (IR) */
-const Octet16& BTM_GetDeviceIDRoot();
-
-/** Return local device DHK. */
-const Octet16& BTM_GetDeviceDHK();
-
-/*******************************************************************************
- *
- * Function BTM_SecurityGrant
- *
- * Description This function is called to grant security process.
- *
- * Parameters bd_addr - peer device bd address.
- * res - result of the operation BTM_SUCCESS if success.
- * Otherwise, BTM_REPEATED_ATTEMPTS is too many
- * attempts.
- *
- * Returns None
- *
- ******************************************************************************/
-void BTM_SecurityGrant(const RawAddress& bd_addr, uint8_t res);
-
-/*******************************************************************************
- *
- * Function BTM_BlePasskeyReply
- *
- * Description This function is called after Security Manager submitted
- * passkey request to the application.
- *
- * Parameters: bd_addr - Address of the device for which passkey was
- * requested
- * res - result of the operation SMP_SUCCESS if success
- * passkey - numeric value in the range of
- * BTM_MIN_PASSKEY_VAL(0) -
- * BTM_MAX_PASSKEY_VAL(999999(0xF423F)).
- *
- ******************************************************************************/
-void BTM_BlePasskeyReply(const RawAddress& bd_addr, uint8_t res,
- uint32_t passkey);
-
-/*******************************************************************************
- *
- * Function BTM_BleConfirmReply
- *
- * Description This function is called after Security Manager submitted
- * numeric comparison request to the application.
- *
- * Parameters: bd_addr - Address of the device with which numeric
- * comparison was requested
- * res - comparison result BTM_SUCCESS if success
- *
- ******************************************************************************/
-void BTM_BleConfirmReply(const RawAddress& bd_addr, uint8_t res);
-
-/*******************************************************************************
- *
- * Function BTM_LeOobDataReply
- *
- * Description This function is called to provide the OOB data for
- * SMP in response to BTM_LE_OOB_REQ_EVT
- *
- * Parameters: bd_addr - Address of the peer device
- * res - result of the operation SMP_SUCCESS if success
- * p_data - simple pairing Randomizer C.
- *
- ******************************************************************************/
-void BTM_BleOobDataReply(const RawAddress& bd_addr, uint8_t res, uint8_t len,
- uint8_t* p_data);
-
-/*******************************************************************************
- *
- * Function BTM_BleSecureConnectionOobDataReply
- *
- * Description This function is called to provide the OOB data for
- * SMP in response to BTM_LE_OOB_REQ_EVT when secure connection
- * data is available
- *
- * Parameters: bd_addr - Address of the peer device
- * p_c - pointer to Confirmation
- * p_r - pointer to Randomizer.
- *
- ******************************************************************************/
-void BTM_BleSecureConnectionOobDataReply(const RawAddress& bd_addr,
- uint8_t* p_c, uint8_t* p_r);
-
-/*******************************************************************************
- *
- * Function BTM_BleDataSignature
- *
- * Description This function is called to sign the data using AES128 CMAC
- * algorith.
- *
- * Parameter bd_addr: target device the data to be signed for.
- * p_text: singing data
- * len: length of the signing data
- * signature: output parameter where data signature is going to
- * be stored.
- *
- * Returns true if signing sucessul, otherwise false.
- *
- ******************************************************************************/
-bool BTM_BleDataSignature(const RawAddress& bd_addr, uint8_t* p_text,
- uint16_t len, BLE_SIGNATURE signature);
-
-/*******************************************************************************
- *
- * Function BTM_BleVerifySignature
- *
- * Description This function is called to verify the data signature
- *
- * Parameter bd_addr: target device the data to be signed for.
- * p_orig: original data before signature.
- * len: length of the signing data
- * counter: counter used when doing data signing
- * p_comp: signature to be compared against.
-
- * Returns true if signature verified correctly; otherwise false.
- *
- ******************************************************************************/
-bool BTM_BleVerifySignature(const RawAddress& bd_addr, uint8_t* p_orig,
- uint16_t len, uint32_t counter, uint8_t* p_comp);
-
-/*******************************************************************************
- *
- * Function BTM_ReadConnectionAddr
- *
- * Description Read the local device random address.
- *
- * Returns void
- *
- ******************************************************************************/
-void BTM_ReadConnectionAddr(const RawAddress& remote_bda,
- RawAddress& local_conn_addr,
- tBLE_ADDR_TYPE* p_addr_type);
-
-/*******************************************************************************
- *
- * Function BTM_IsBleConnection
- *
- * Description This function is called to check if the connection handle
- * for an LE link
- *
- * Returns true if connection is LE link, otherwise false.
- *
- ******************************************************************************/
-bool BTM_IsBleConnection(uint16_t conn_handle);
-
-/*******************************************************************************
- *
- * Function BTM_ReadRemoteConnectionAddr
- *
- * Description Read the remote device address currently used.
- *
- * Returns void
- *
- ******************************************************************************/
-bool BTM_ReadRemoteConnectionAddr(const RawAddress& pseudo_addr,
- RawAddress& conn_addr,
- tBLE_ADDR_TYPE* p_addr_type);
-
-/*******************************************************************************
- *
- * Function BTM_BleLoadLocalKeys
- *
- * Description Local local identity key, encryption root or sign counter.
- *
- * Parameters: key_type: type of key, can be BTM_BLE_KEY_TYPE_ID,
- * BTM_BLE_KEY_TYPE_ER
- * or BTM_BLE_KEY_TYPE_COUNTER.
- * p_key: pointer to the key.
- *
- * Returns non2.
- *
- ******************************************************************************/
-void BTM_BleLoadLocalKeys(uint8_t key_type, tBTM_BLE_LOCAL_KEYS* p_key);
-
-/********************************************************
- *
- * Function BTM_BleSetPrefConnParams
- *
- * Description Set a peripheral's preferred connection parameters. When
- * any of the value does not want to be updated while others
- * do, use BTM_BLE_CONN_PARAM_UNDEF for the ones want to
- * leave untouched.
- *
- * Parameters: bd_addr - BD address of the peripheral
- * min_conn_int - minimum preferred connection interval
- * max_conn_int - maximum preferred connection interval
- * slave_latency - preferred slave latency
- * supervision_tout - preferred supervision timeout
- *
- * Returns void
- *
- ******************************************************************************/
-void BTM_BleSetPrefConnParams(const RawAddress& bd_addr, uint16_t min_conn_int,
- uint16_t max_conn_int, uint16_t slave_latency,
- uint16_t supervision_tout);
-
-/******************************************************************************
- *
- * Function BTM_BleSetConnScanParams
- *
- * Description Set scan parameters used in BLE connection request
- *
- * Parameters: scan_interval - scan interval
- * scan_window - scan window
- *
- * Returns void
- *
- ******************************************************************************/
-void BTM_BleSetConnScanParams(uint32_t scan_interval, uint32_t scan_window);
-
/******************************************************************************
*
* Function BTM_BleReadControllerFeatures
@@ -2421,38 +2678,6 @@
/*******************************************************************************
*
- * Function BTM_ReadDevInfo
- *
- * Description This function is called to read the device/address type
- * of BD address.
- *
- * Parameter remote_bda: remote device address
- * p_dev_type: output parameter to read the device type.
- * p_addr_type: output parameter to read the address type.
- *
- ******************************************************************************/
-void BTM_ReadDevInfo(const RawAddress& remote_bda, tBT_DEVICE_TYPE* p_dev_type,
- tBLE_ADDR_TYPE* p_addr_type);
-
-/*******************************************************************************
- *
- * Function BTM_ReadConnectedTransportAddress
- *
- * Description This function is called to read the paired device/address
- * type of other device paired corresponding to the BD_address
- *
- * Parameter remote_bda: remote device address, carry out the transport
- * address
- * transport: active transport
- *
- * Return true if an active link is identified; false otherwise
- *
- ******************************************************************************/
-bool BTM_ReadConnectedTransportAddress(RawAddress* remote_bda,
- tBT_TRANSPORT transport);
-
-/*******************************************************************************
- *
* Function BTM_BleConfigPrivacy
*
* Description This function is called to enable or disable the privacy in
@@ -2492,18 +2717,6 @@
/*******************************************************************************
*
- * Function BTM_BleMaxMultiAdvInstanceCount
- *
- * Description Returns the maximum number of multi adv instances supported
- * by the controller.
- *
- * Returns Max multi adv instance count
- *
- ******************************************************************************/
-uint8_t BTM_BleMaxMultiAdvInstanceCount();
-
-/*******************************************************************************
- *
* Function BTM_BleSetConnectableMode
*
* Description This function is called to set BLE connectable mode for a
@@ -2538,69 +2751,6 @@
/*******************************************************************************
*
- * Function BTM_BleUpdateAdvFilterPolicy
- *
- * Description This function update the filter policy of advertiser.
- *
- * Parameter adv_policy: advertising filter policy
- *
- * Return void
- ******************************************************************************/
-void BTM_BleUpdateAdvFilterPolicy(tBTM_BLE_AFP adv_policy);
-
-/*******************************************************************************
- *
- * Function BTM_BleReceiverTest
- *
- * Description This function is called to start the LE Receiver test
- *
- * Parameter rx_freq - Frequency Range
- * p_cmd_cmpl_cback - Command Complete callback
- *
- ******************************************************************************/
-void BTM_BleReceiverTest(uint8_t rx_freq, tBTM_CMPL_CB* p_cmd_cmpl_cback);
-
-/*******************************************************************************
- *
- * Function BTM_BleTransmitterTest
- *
- * Description This function is called to start the LE Transmitter test
- *
- * Parameter tx_freq - Frequency Range
- * test_data_len - Length in bytes of payload data in each
- * packet
- * packet_payload - Pattern to use in the payload
- * p_cmd_cmpl_cback - Command Complete callback
- *
- ******************************************************************************/
-void BTM_BleTransmitterTest(uint8_t tx_freq, uint8_t test_data_len,
- uint8_t packet_payload,
- tBTM_CMPL_CB* p_cmd_cmpl_cback);
-
-/*******************************************************************************
- *
- * Function BTM_BleTestEnd
- *
- * Description This function is called to stop the in-progress TX or RX test
- *
- * Parameter p_cmd_cmpl_cback - Command complete callback
- *
- ******************************************************************************/
-void BTM_BleTestEnd(tBTM_CMPL_CB* p_cmd_cmpl_cback);
-
-/*******************************************************************************
- *
- * Function BTM_UseLeLink
- *
- * Description Select the underlying physical link to use.
- *
- * Returns true to use LE, false use BR/EDR.
- *
- ******************************************************************************/
-bool BTM_UseLeLink(const RawAddress& bd_addr);
-
-/*******************************************************************************
- *
* Function BTM_BleStackEnable
*
* Description Enable/Disable BLE functionality on stack regardless of
@@ -2613,78 +2763,9 @@
******************************************************************************/
tBTM_STATUS BTM_BleStackEnable(bool enable);
-/*******************************************************************************
- *
- * Function BTM_GetLeSecurityState
- *
- * Description This function is called to get security mode 1 flags and
- * encryption key size for LE peer.
- *
- * Returns bool true if LE device is found, false otherwise.
- *
- ******************************************************************************/
-bool BTM_GetLeSecurityState(const RawAddress& bd_addr,
- uint8_t* p_le_dev_sec_flags,
- uint8_t* p_le_key_size);
-
-/*******************************************************************************
- *
- * Function BTM_BleSecurityProcedureIsRunning
- *
- * Description This function indicates if LE security procedure is
- * currently running with the peer.
- *
- * Returns bool true if security procedure is running, false otherwise.
- *
- ******************************************************************************/
-bool BTM_BleSecurityProcedureIsRunning(const RawAddress& bd_addr);
-
-/*******************************************************************************
- *
- * Function BTM_BleGetSupportedKeySize
- *
- * Description This function gets the maximum encryption key size in bytes
- * the local device can suport.
- * record.
- *
- * Returns the key size or 0 if the size can't be retrieved.
- *
- ******************************************************************************/
-uint8_t BTM_BleGetSupportedKeySize(const RawAddress& bd_addr);
-
-/*******************************************************************************
- *
- * Function BTM_BleAdvFilterParamSetup
- *
- * Description This function is called to setup the adv data payload filter
- * condition.
- *
- ******************************************************************************/
-void BTM_BleAdvFilterParamSetup(
- int action, tBTM_BLE_PF_FILT_INDEX filt_index,
- std::unique_ptr<btgatt_filt_param_setup_t> p_filt_params,
- tBTM_BLE_PF_PARAM_CB cb);
-
/**
* This functions are called to configure the adv data payload filter condition
*/
-void BTM_LE_PF_set(tBTM_BLE_PF_FILT_INDEX filt_index,
- std::vector<ApcfCommand> commands, tBTM_BLE_PF_CFG_CBACK cb);
-void BTM_LE_PF_clear(tBTM_BLE_PF_FILT_INDEX filt_index,
- tBTM_BLE_PF_CFG_CBACK cb);
-
-/*******************************************************************************
- *
- * Function BTM_BleEnableDisableFilterFeature
- *
- * Description Enable or disable the APCF feature
- *
- * Parameters enable - true - enables APCF, false - disables APCF
- *
- ******************************************************************************/
-void BTM_BleEnableDisableFilterFeature(uint8_t enable,
- tBTM_BLE_PF_STATUS_CBACK p_stat_cback);
-
/*******************************************************************************
*
* Function BTM_BleGetEnergyInfo
@@ -2698,88 +2779,5 @@
******************************************************************************/
tBTM_STATUS BTM_BleGetEnergyInfo(tBTM_BLE_ENERGY_INFO_CBACK* p_ener_cback);
-/*******************************************************************************
- *
- * Function BTM_SetBleDataLength
- *
- * Description Set the maximum BLE transmission packet size
- *
- * Returns BTM_SUCCESS if success; otherwise failed.
- *
- ******************************************************************************/
-tBTM_STATUS BTM_SetBleDataLength(const RawAddress& bd_addr,
- uint16_t tx_pdu_length);
-
-/*******************************************************************************
- *
- * Function BTM_BleReadPhy
- *
- * Description To read the current PHYs for specified LE connection
- *
- *
- * Returns BTM_SUCCESS if success; otherwise failed.
- *
- ******************************************************************************/
-void BTM_BleReadPhy(
- const RawAddress& bd_addr,
- base::Callback<void(uint8_t tx_phy, uint8_t rx_phy, uint8_t status)> cb);
-
-/*******************************************************************************
- *
- * Function BTM_BleSetDefaultPhy
- *
- * Description To set preferred PHY for ensuing LE connections
- *
- *
- * Returns BTM_SUCCESS if success; otherwise failed.
- *
- ******************************************************************************/
-tBTM_STATUS BTM_BleSetDefaultPhy(uint8_t all_phys, uint8_t tx_phys,
- uint8_t rx_phys);
-
-/*******************************************************************************
- *
- * Function BTM_BleSetPhy
- *
- * Description To set PHY preferences for specified LE connection
- *
- *
- * Returns BTM_SUCCESS if success; otherwise failed.
- *
- ******************************************************************************/
-void BTM_BleSetPhy(const RawAddress& bd_addr, uint8_t tx_phys, uint8_t rx_phys,
- uint16_t phy_options);
-
-void BTM_LE_PF_local_name(tBTM_BLE_SCAN_COND_OP action,
- tBTM_BLE_PF_FILT_INDEX filt_index,
- std::vector<uint8_t> name, tBTM_BLE_PF_CFG_CBACK cb);
-
-void BTM_LE_PF_srvc_data(tBTM_BLE_SCAN_COND_OP action,
- tBTM_BLE_PF_FILT_INDEX filt_index);
-
-void BTM_LE_PF_manu_data(tBTM_BLE_SCAN_COND_OP action,
- tBTM_BLE_PF_FILT_INDEX filt_index, uint16_t company_id,
- uint16_t company_id_mask, std::vector<uint8_t> data,
- std::vector<uint8_t> data_mask,
- tBTM_BLE_PF_CFG_CBACK cb);
-
-void BTM_LE_PF_srvc_data_pattern(tBTM_BLE_SCAN_COND_OP action,
- tBTM_BLE_PF_FILT_INDEX filt_index,
- std::vector<uint8_t> data,
- std::vector<uint8_t> data_mask,
- tBTM_BLE_PF_CFG_CBACK cb);
-
-void BTM_LE_PF_addr_filter(tBTM_BLE_SCAN_COND_OP action,
- tBTM_BLE_PF_FILT_INDEX filt_index, tBLE_BD_ADDR addr,
- tBTM_BLE_PF_CFG_CBACK cb);
-
-void BTM_LE_PF_uuid_filter(tBTM_BLE_SCAN_COND_OP action,
- tBTM_BLE_PF_FILT_INDEX filt_index,
- tBTM_BLE_PF_COND_TYPE filter_type,
- const bluetooth::Uuid& uuid,
- tBTM_BLE_PF_LOGIC_TYPE cond_logic,
- const bluetooth::Uuid& uuid_mask,
- tBTM_BLE_PF_CFG_CBACK cb);
-
} // namespace shim
} // namespace bluetooth