| /****************************************************************************** |
| * |
| * Copyright (C) 2009-2013 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| #ifndef GAP_API_H |
| #define GAP_API_H |
| |
| #include "profiles_api.h" |
| #include "btm_api.h" |
| #include "l2c_api.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /***************************************************************************** |
| ** Constants |
| *****************************************************************************/ |
| /*** GAP Error and Status Codes ***/ |
| #define GAP_UNSUPPORTED (GAP_ERR_GRP + 0x01) /* Unsupported call */ |
| #define GAP_EOINQDB (GAP_ERR_GRP + 0x02) /* End of inquiry database marker */ |
| #define GAP_ERR_BUSY (GAP_ERR_GRP + 0x03) /* The requested function was busy */ |
| #define GAP_ERR_NO_CTRL_BLK (GAP_ERR_GRP + 0x04) /* No control blocks available */ |
| #define GAP_ERR_STARTING_CMD (GAP_ERR_GRP + 0x05) /* Error occurred while initiating the command */ |
| #define GAP_NO_BDADDR_REC (GAP_ERR_GRP + 0x06) /* No Inquiry DB record for BD_ADDR */ |
| #define GAP_ERR_ILL_MODE (GAP_ERR_GRP + 0x07) /* An illegal mode parameter was detected */ |
| #define GAP_ERR_ILL_INQ_TIME (GAP_ERR_GRP + 0x08) /* An illegal time parameter was detected */ |
| #define GAP_ERR_ILL_PARM (GAP_ERR_GRP + 0x09) /* An illegal parameter was detected */ |
| #define GAP_ERR_REM_NAME (GAP_ERR_GRP + 0x0a) /* Error starting the remote device name request */ |
| #define GAP_CMD_INITIATED (GAP_ERR_GRP + 0x0b) /* The GAP command was started (result pending) */ |
| #define GAP_DEVICE_NOT_UP (GAP_ERR_GRP + 0x0c) /* The device was not up; the request was not executed */ |
| #define GAP_BAD_BD_ADDR (GAP_ERR_GRP + 0x0d) /* The bd addr passed in was not found or invalid */ |
| |
| #define GAP_ERR_BAD_HANDLE (GAP_ERR_GRP + 0x0e) /* Bad GAP handle */ |
| #define GAP_ERR_BUF_OFFSET (GAP_ERR_GRP + 0x0f) /* Buffer offset invalid */ |
| #define GAP_ERR_BAD_STATE (GAP_ERR_GRP + 0x10) /* Connection is in invalid state */ |
| #define GAP_NO_DATA_AVAIL (GAP_ERR_GRP + 0x11) /* No data available */ |
| #define GAP_ERR_CONGESTED (GAP_ERR_GRP + 0x12) /* BT stack is congested */ |
| #define GAP_ERR_SECURITY (GAP_ERR_GRP + 0x13) /* Security failed */ |
| |
| #define GAP_ERR_PROCESSING (GAP_ERR_GRP + 0x14) /* General error processing BTM request */ |
| #define GAP_ERR_TIMEOUT (GAP_ERR_GRP + 0x15) /* Timeout occurred while processing cmd */ |
| #define GAP_EVT_CONN_OPENED 0x0100 |
| #define GAP_EVT_CONN_CLOSED 0x0101 |
| #define GAP_EVT_CONN_DATA_AVAIL 0x0102 |
| #define GAP_EVT_CONN_CONGESTED 0x0103 |
| #define GAP_EVT_CONN_UNCONGESTED 0x0104 |
| #define GAP_EVT_TX_EMPTY 0x0105 |
| |
| /* Values for 'chan_mode_mask' field */ |
| /* GAP_ConnOpen() - optional channels to negotiate */ |
| #define GAP_FCR_CHAN_OPT_BASIC L2CAP_FCR_CHAN_OPT_BASIC |
| #define GAP_FCR_CHAN_OPT_ERTM L2CAP_FCR_CHAN_OPT_ERTM |
| #define GAP_FCR_CHAN_OPT_STREAM L2CAP_FCR_CHAN_OPT_STREAM |
| /*** used in connection variables and functions ***/ |
| #define GAP_INVALID_HANDLE 0xFFFF |
| |
| /* This is used to change the criteria for AMP */ |
| #define GAP_PROTOCOL_ID (UUID_PROTOCOL_UDP) |
| |
| |
| #ifndef GAP_PREFER_CONN_INT_MAX |
| #define GAP_PREFER_CONN_INT_MAX BTM_BLE_CONN_INT_MIN |
| #endif |
| |
| #ifndef GAP_PREFER_CONN_INT_MIN |
| #define GAP_PREFER_CONN_INT_MIN BTM_BLE_CONN_INT_MIN |
| #endif |
| |
| #ifndef GAP_PREFER_CONN_LATENCY |
| #define GAP_PREFER_CONN_LATENCY 0 |
| #endif |
| |
| #ifndef GAP_PREFER_CONN_SP_TOUT |
| #define GAP_PREFER_CONN_SP_TOUT 2000 |
| #endif |
| |
| /***************************************************************************** |
| ** Type Definitions |
| *****************************************************************************/ |
| /* |
| ** Callback function for connection services |
| */ |
| typedef void (tGAP_CONN_CALLBACK) (uint16_t gap_handle, uint16_t event); |
| |
| /* |
| ** Define the callback function prototypes. Parameters are specific |
| ** to each event and are described below |
| */ |
| typedef void (tGAP_CALLBACK) (uint16_t event, void *p_data); |
| |
| |
| /* Definition of the GAP_FindAddrByName results structure */ |
| typedef struct |
| { |
| uint16_t status; |
| BD_ADDR bd_addr; |
| tBTM_BD_NAME devname; |
| } tGAP_FINDADDR_RESULTS; |
| |
| typedef struct |
| { |
| uint16_t int_min; |
| uint16_t int_max; |
| uint16_t latency; |
| uint16_t sp_tout; |
| }tGAP_BLE_PREF_PARAM; |
| |
| typedef union |
| { |
| tGAP_BLE_PREF_PARAM conn_param; |
| BD_ADDR reconn_bda; |
| uint16_t icon; |
| uint8_t *p_dev_name; |
| uint8_t addr_resolution; |
| |
| }tGAP_BLE_ATTR_VALUE; |
| |
| typedef void (tGAP_BLE_CMPL_CBACK)(bool status, BD_ADDR addr, uint16_t length, char *p_name); |
| |
| |
| /***************************************************************************** |
| ** External Function Declarations |
| *****************************************************************************/ |
| |
| /*** Functions for L2CAP connection interface ***/ |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnOpen |
| ** |
| ** Description This function is called to open a generic L2CAP connection. |
| ** |
| ** Returns handle of the connection if successful, else GAP_INVALID_HANDLE |
| ** |
| *******************************************************************************/ |
| extern uint16_t GAP_ConnOpen(const char *p_serv_name, uint8_t service_id, bool is_server, |
| BD_ADDR p_rem_bda, uint16_t psm, tL2CAP_CFG_INFO *p_cfg, |
| tL2CAP_ERTM_INFO *ertm_info, |
| uint16_t security, uint8_t chan_mode_mask, |
| tGAP_CONN_CALLBACK *p_cb, tBT_TRANSPORT transport); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnClose |
| ** |
| ** Description This function is called to close a connection. |
| ** |
| ** Returns BT_PASS - closed OK |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** |
| *******************************************************************************/ |
| extern uint16_t GAP_ConnClose (uint16_t gap_handle); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnReadData |
| ** |
| ** Description GKI buffer unaware application will call this function |
| ** after receiving GAP_EVT_RXDATA event. A data copy is made |
| ** into the receive buffer parameter. |
| ** |
| ** Returns BT_PASS - data read |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** GAP_NO_DATA_AVAIL - no data available |
| ** |
| *******************************************************************************/ |
| extern uint16_t GAP_ConnReadData (uint16_t gap_handle, uint8_t *p_data, |
| uint16_t max_len, uint16_t *p_len); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_GetRxQueueCnt |
| ** |
| ** Description This function return number of bytes on the rx queue. |
| ** |
| ** Parameters: handle - Handle returned in the GAP_ConnOpen |
| ** p_rx_queue_count - Pointer to return queue count in. |
| ** |
| ** |
| *******************************************************************************/ |
| extern int GAP_GetRxQueueCnt (uint16_t handle, uint32_t *p_rx_queue_count); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnBTRead |
| ** |
| ** Description GKI buffer aware applications will call this function after |
| ** receiving an GAP_EVT_RXDATA event to process the incoming |
| ** data buffer. |
| ** |
| ** Returns BT_PASS - data read |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** GAP_NO_DATA_AVAIL - no data available |
| ** |
| *******************************************************************************/ |
| extern uint16_t GAP_ConnBTRead (uint16_t gap_handle, BT_HDR **pp_buf); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnWriteData |
| ** |
| ** Description GKI buffer unaware application will call this function |
| ** to send data to the connection. A data copy is made into a GKI |
| ** buffer. |
| ** |
| ** Returns BT_PASS - data read |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** GAP_ERR_BAD_STATE - connection not established |
| ** GAP_CONGESTION - system is congested |
| ** |
| *******************************************************************************/ |
| extern uint16_t GAP_ConnWriteData (uint16_t gap_handle, uint8_t *p_data, |
| uint16_t max_len, uint16_t *p_len); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnReconfig |
| ** |
| ** Description Applications can call this function to reconfigure the connection. |
| ** |
| ** Returns BT_PASS - config process started |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** |
| *******************************************************************************/ |
| extern uint16_t GAP_ConnReconfig (uint16_t gap_handle, tL2CAP_CFG_INFO *p_cfg); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnSetIdleTimeout |
| ** |
| ** Description Higher layers call this function to set the idle timeout for |
| ** a connection, or for all future connections. The "idle timeout" |
| ** is the amount of time that a connection can remain up with |
| ** no L2CAP channels on it. A timeout of zero means that the |
| ** connection will be torn down immediately when the last channel |
| ** is removed. A timeout of 0xFFFF means no timeout. Values are |
| ** in seconds. |
| ** |
| ** Returns BT_PASS - config process started |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** |
| *******************************************************************************/ |
| extern uint16_t GAP_ConnSetIdleTimeout (uint16_t gap_handle, uint16_t timeout); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnGetRemoteAddr |
| ** |
| ** Description This function is called to get the remote BD address |
| ** of a connection. |
| ** |
| ** Returns BT_PASS - closed OK |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** |
| *******************************************************************************/ |
| extern uint8_t *GAP_ConnGetRemoteAddr (uint16_t gap_handle); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnGetRemMtuSize |
| ** |
| ** Description Returns the remote device's MTU size. |
| ** |
| ** Returns uint16_t - maximum size buffer that can be transmitted to the peer |
| ** |
| *******************************************************************************/ |
| extern uint16_t GAP_ConnGetRemMtuSize (uint16_t gap_handle); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnGetL2CAPCid |
| ** |
| ** Description Returns the L2CAP channel id |
| ** |
| ** Parameters: handle - Handle of the connection |
| ** |
| ** Returns uint16_t - The L2CAP channel id |
| ** 0, if error |
| ** |
| *******************************************************************************/ |
| extern uint16_t GAP_ConnGetL2CAPCid (uint16_t gap_handle); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_SetTraceLevel |
| ** |
| ** Description This function sets the trace level for GAP. If called with |
| ** a value of 0xFF, it simply returns the current trace level. |
| ** |
| ** Returns The new or current trace level |
| ** |
| *******************************************************************************/ |
| extern uint8_t GAP_SetTraceLevel (uint8_t new_level); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_Init |
| ** |
| ** Description Initializes the control blocks used by GAP. |
| ** This routine should not be called except once per |
| ** stack invocation. |
| ** |
| ** Returns Nothing |
| ** |
| *******************************************************************************/ |
| extern void GAP_Init(void); |
| |
| #if (BLE_INCLUDED == TRUE) |
| /******************************************************************************* |
| ** |
| ** Function GAP_BleAttrDBUpdate |
| ** |
| ** Description update GAP local BLE attribute database. |
| ** |
| ** Returns Nothing |
| ** |
| *******************************************************************************/ |
| extern void GAP_BleAttrDBUpdate(uint16_t attr_uuid, tGAP_BLE_ATTR_VALUE *p_value); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_BleReadPeerPrefConnParams |
| ** |
| ** Description Start a process to read a connected peripheral's preferred |
| ** connection parameters |
| ** |
| ** Returns true if read started, else false if GAP is busy |
| ** |
| *******************************************************************************/ |
| extern bool GAP_BleReadPeerPrefConnParams (BD_ADDR peer_bda); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_BleReadPeerDevName |
| ** |
| ** Description Start a process to read a connected peripheral's device name. |
| ** |
| ** Returns true if request accepted |
| ** |
| *******************************************************************************/ |
| extern bool GAP_BleReadPeerDevName (BD_ADDR peer_bda, tGAP_BLE_CMPL_CBACK *p_cback); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_BleReadPeerAddressResolutionCap |
| ** |
| ** Description Start a process to read peer address resolution capability |
| ** |
| ** Returns true if request accepted |
| ** |
| *******************************************************************************/ |
| extern bool GAP_BleReadPeerAddressResolutionCap (BD_ADDR peer_bda, |
| tGAP_BLE_CMPL_CBACK *p_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_BleCancelReadPeerDevName |
| ** |
| ** Description Cancel reading a peripheral's device name. |
| ** |
| ** Returns true if request accepted |
| ** |
| *******************************************************************************/ |
| extern bool GAP_BleCancelReadPeerDevName (BD_ADDR peer_bda); |
| |
| #endif |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* GAP_API_H */ |