| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains functions for the SMP L2Cap interface |
| * |
| ******************************************************************************/ |
| |
| #include "bt_target.h" |
| |
| #include <string.h> |
| #include "btm_ble_api.h" |
| #include "l2c_api.h" |
| |
| #include "smp_int.h" |
| |
| extern fixed_queue_t* btu_general_alarm_queue; |
| |
| static void smp_tx_complete_callback(uint16_t cid, uint16_t num_pkt); |
| |
| static void smp_connect_callback(uint16_t channel, const RawAddress& bd_addr, |
| bool connected, uint16_t reason, |
| tBT_TRANSPORT transport); |
| static void smp_data_received(uint16_t channel, const RawAddress& bd_addr, |
| BT_HDR* p_buf); |
| |
| static void smp_br_connect_callback(uint16_t channel, const RawAddress& bd_addr, |
| bool connected, uint16_t reason, |
| tBT_TRANSPORT transport); |
| static void smp_br_data_received(uint16_t channel, const RawAddress& bd_addr, |
| BT_HDR* p_buf); |
| |
| /******************************************************************************* |
| * |
| * Function smp_l2cap_if_init |
| * |
| * Description This function is called during the SMP task startup |
| * to register interface functions with L2CAP. |
| * |
| ******************************************************************************/ |
| void smp_l2cap_if_init(void) { |
| tL2CAP_FIXED_CHNL_REG fixed_reg; |
| SMP_TRACE_EVENT("SMDBG l2c %s", __func__); |
| fixed_reg.fixed_chnl_opts.mode = L2CAP_FCR_BASIC_MODE; |
| fixed_reg.fixed_chnl_opts.max_transmit = 0; |
| fixed_reg.fixed_chnl_opts.rtrans_tout = 0; |
| fixed_reg.fixed_chnl_opts.mon_tout = 0; |
| fixed_reg.fixed_chnl_opts.mps = 0; |
| fixed_reg.fixed_chnl_opts.tx_win_sz = 0; |
| |
| fixed_reg.pL2CA_FixedConn_Cb = smp_connect_callback; |
| fixed_reg.pL2CA_FixedData_Cb = smp_data_received; |
| fixed_reg.pL2CA_FixedTxComplete_Cb = smp_tx_complete_callback; |
| |
| fixed_reg.pL2CA_FixedCong_Cb = |
| NULL; /* do not handle congestion on this channel */ |
| fixed_reg.default_idle_tout = |
| 60; /* set 60 seconds timeout, 0xffff default idle timeout */ |
| |
| L2CA_RegisterFixedChannel(L2CAP_SMP_CID, &fixed_reg); |
| |
| fixed_reg.pL2CA_FixedConn_Cb = smp_br_connect_callback; |
| fixed_reg.pL2CA_FixedData_Cb = smp_br_data_received; |
| |
| L2CA_RegisterFixedChannel(L2CAP_SMP_BR_CID, &fixed_reg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function smp_connect_callback |
| * |
| * Description This callback function is called by L2CAP to indicate that |
| * SMP channel is |
| * connected (conn = true)/disconnected (conn = false). |
| * |
| ******************************************************************************/ |
| static void smp_connect_callback(uint16_t channel, const RawAddress& bd_addr, |
| bool connected, uint16_t reason, |
| tBT_TRANSPORT transport) { |
| tSMP_CB* p_cb = &smp_cb; |
| tSMP_INT_DATA int_data; |
| |
| SMP_TRACE_EVENT("SMDBG l2c %s", __func__); |
| |
| if (transport == BT_TRANSPORT_BR_EDR || bd_addr.IsEmpty()) return; |
| |
| if (bd_addr == p_cb->pairing_bda) { |
| VLOG(2) << __func__ << " for pairing BDA: " << bd_addr |
| << " Event: " << ((connected) ? "connected" : "disconnected"); |
| |
| if (connected) { |
| if (!p_cb->connect_initialized) { |
| p_cb->connect_initialized = true; |
| /* initiating connection established */ |
| p_cb->role = L2CA_GetBleConnRole(bd_addr); |
| |
| /* initialize local i/r key to be default keys */ |
| p_cb->local_r_key = p_cb->local_i_key = SMP_SEC_DEFAULT_KEY; |
| p_cb->loc_auth_req = p_cb->peer_auth_req = SMP_DEFAULT_AUTH_REQ; |
| p_cb->cb_evt = SMP_IO_CAP_REQ_EVT; |
| smp_sm_event(p_cb, SMP_L2CAP_CONN_EVT, NULL); |
| } |
| } else { |
| int_data.reason = reason; |
| /* Disconnected while doing security */ |
| smp_sm_event(p_cb, SMP_L2CAP_DISCONN_EVT, &int_data); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function smp_data_received |
| * |
| * Description This function is called when data is received from L2CAP on |
| * SMP channel. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void smp_data_received(uint16_t channel, const RawAddress& bd_addr, |
| BT_HDR* p_buf) { |
| tSMP_CB* p_cb = &smp_cb; |
| uint8_t* p = (uint8_t*)(p_buf + 1) + p_buf->offset; |
| uint8_t cmd; |
| SMP_TRACE_EVENT("SMDBG l2c %s", __func__); |
| |
| STREAM_TO_UINT8(cmd, p); |
| |
| /* sanity check */ |
| if ((SMP_OPCODE_MAX < cmd) || (SMP_OPCODE_MIN > cmd)) { |
| SMP_TRACE_WARNING("Ignore received command with RESERVED code 0x%02x", cmd); |
| osi_free(p_buf); |
| return; |
| } |
| |
| /* reject the pairing request if there is an on-going SMP pairing */ |
| if (SMP_OPCODE_PAIRING_REQ == cmd || SMP_OPCODE_SEC_REQ == cmd) { |
| if ((p_cb->state == SMP_STATE_IDLE) && |
| (p_cb->br_state == SMP_BR_STATE_IDLE) && |
| !(p_cb->flags & SMP_PAIR_FLAGS_WE_STARTED_DD)) { |
| p_cb->role = L2CA_GetBleConnRole(bd_addr); |
| p_cb->pairing_bda = bd_addr; |
| } else if (bd_addr != p_cb->pairing_bda) { |
| osi_free(p_buf); |
| smp_reject_unexpected_pairing_command(bd_addr); |
| return; |
| } |
| /* else, out of state pairing request/security request received, passed into |
| * SM */ |
| } |
| |
| if (bd_addr == p_cb->pairing_bda) { |
| alarm_set_on_queue(p_cb->smp_rsp_timer_ent, SMP_WAIT_FOR_RSP_TIMEOUT_MS, |
| smp_rsp_timeout, NULL, btu_general_alarm_queue); |
| |
| if (cmd == SMP_OPCODE_CONFIRM) { |
| SMP_TRACE_DEBUG( |
| "in %s cmd = 0x%02x, peer_auth_req = 0x%02x," |
| "loc_auth_req = 0x%02x", |
| __func__, cmd, p_cb->peer_auth_req, p_cb->loc_auth_req); |
| |
| if ((p_cb->peer_auth_req & SMP_SC_SUPPORT_BIT) && |
| (p_cb->loc_auth_req & SMP_SC_SUPPORT_BIT)) { |
| cmd = SMP_OPCODE_PAIR_COMMITM; |
| } |
| } |
| |
| p_cb->rcvd_cmd_code = cmd; |
| p_cb->rcvd_cmd_len = (uint8_t)p_buf->len; |
| smp_sm_event(p_cb, cmd, p); |
| } |
| |
| osi_free(p_buf); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function smp_tx_complete_callback |
| * |
| * Description SMP channel tx complete callback |
| * |
| ******************************************************************************/ |
| static void smp_tx_complete_callback(uint16_t cid, uint16_t num_pkt) { |
| tSMP_CB* p_cb = &smp_cb; |
| |
| if (p_cb->total_tx_unacked >= num_pkt) |
| p_cb->total_tx_unacked -= num_pkt; |
| else |
| SMP_TRACE_ERROR("Unexpected %s: num_pkt = %d", __func__, num_pkt); |
| |
| uint8_t reason = SMP_SUCCESS; |
| if (p_cb->total_tx_unacked == 0 && p_cb->wait_for_authorization_complete) { |
| if (cid == L2CAP_SMP_CID) |
| smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &reason); |
| else |
| smp_br_state_machine_event(p_cb, SMP_BR_AUTH_CMPL_EVT, &reason); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function smp_br_connect_callback |
| * |
| * Description This callback function is called by L2CAP to indicate that |
| * SMP BR channel is |
| * connected (conn = true)/disconnected (conn = false). |
| * |
| ******************************************************************************/ |
| static void smp_br_connect_callback(uint16_t channel, const RawAddress& bd_addr, |
| bool connected, uint16_t reason, |
| tBT_TRANSPORT transport) { |
| tSMP_CB* p_cb = &smp_cb; |
| tSMP_INT_DATA int_data; |
| |
| SMP_TRACE_EVENT("%s", __func__); |
| |
| if (transport != BT_TRANSPORT_BR_EDR) { |
| SMP_TRACE_WARNING("%s is called on unexpected transport %d", __func__, |
| transport); |
| return; |
| } |
| |
| if (bd_addr != p_cb->pairing_bda) return; |
| |
| VLOG(1) << __func__ << " for pairing BDA: " << bd_addr |
| << " Event: " << ((connected) ? "connected" : "disconnected"); |
| |
| if (connected) { |
| if (!p_cb->connect_initialized) { |
| p_cb->connect_initialized = true; |
| /* initialize local i/r key to be default keys */ |
| p_cb->local_r_key = p_cb->local_i_key = SMP_BR_SEC_DEFAULT_KEY; |
| p_cb->loc_auth_req = p_cb->peer_auth_req = 0; |
| p_cb->cb_evt = SMP_BR_KEYS_REQ_EVT; |
| smp_br_state_machine_event(p_cb, SMP_BR_L2CAP_CONN_EVT, NULL); |
| } |
| } else { |
| int_data.reason = reason; |
| /* Disconnected while doing security */ |
| smp_br_state_machine_event(p_cb, SMP_BR_L2CAP_DISCONN_EVT, &int_data); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function smp_br_data_received |
| * |
| * Description This function is called when data is received from L2CAP on |
| * SMP BR channel. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void smp_br_data_received(uint16_t channel, const RawAddress& bd_addr, |
| BT_HDR* p_buf) { |
| tSMP_CB* p_cb = &smp_cb; |
| uint8_t* p = (uint8_t*)(p_buf + 1) + p_buf->offset; |
| uint8_t cmd; |
| SMP_TRACE_EVENT("SMDBG l2c %s", __func__); |
| |
| STREAM_TO_UINT8(cmd, p); |
| |
| /* sanity check */ |
| if ((SMP_OPCODE_MAX < cmd) || (SMP_OPCODE_MIN > cmd)) { |
| SMP_TRACE_WARNING("Ignore received command with RESERVED code 0x%02x", cmd); |
| osi_free(p_buf); |
| return; |
| } |
| |
| /* reject the pairing request if there is an on-going SMP pairing */ |
| if (SMP_OPCODE_PAIRING_REQ == cmd) { |
| if ((p_cb->state == SMP_STATE_IDLE) && |
| (p_cb->br_state == SMP_BR_STATE_IDLE)) { |
| p_cb->role = HCI_ROLE_SLAVE; |
| p_cb->smp_over_br = true; |
| p_cb->pairing_bda = bd_addr; |
| } else if (bd_addr != p_cb->pairing_bda) { |
| osi_free(p_buf); |
| smp_reject_unexpected_pairing_command(bd_addr); |
| return; |
| } |
| /* else, out of state pairing request received, passed into State Machine */ |
| } |
| |
| if (bd_addr == p_cb->pairing_bda) { |
| alarm_set_on_queue(p_cb->smp_rsp_timer_ent, SMP_WAIT_FOR_RSP_TIMEOUT_MS, |
| smp_rsp_timeout, NULL, btu_general_alarm_queue); |
| |
| p_cb->rcvd_cmd_code = cmd; |
| p_cb->rcvd_cmd_len = (uint8_t)p_buf->len; |
| smp_br_state_machine_event(p_cb, cmd, p); |
| } |
| |
| osi_free(p_buf); |
| } |