| /****************************************************************************** |
| * |
| * Copyright (C) 2009-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This is the interface file for the HL (HeaLth device profile) subsystem |
| * call-out functions. |
| * |
| ******************************************************************************/ |
| #ifndef BTA_HL_CO_H |
| #define BTA_HL_CO_H |
| |
| #include "bta_api.h" |
| #include "bta_hl_api.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /***************************************************************************** |
| * Constants and Data Types |
| ****************************************************************************/ |
| /************************** |
| * Common Definitions |
| **************************/ |
| |
| /******************************************************************************* |
| * |
| * Function bta_hl_co_get_num_of_mdep |
| * |
| * Description This function is called to get the number of MDEPs for this |
| * application ID |
| * |
| * Parameters app_id - application ID |
| * p_num_of_mdep (output) - number of MDEP configurations |
| *supported |
| * by the application |
| * |
| * Returns Bloolean - true success |
| * |
| ******************************************************************************/ |
| extern bool bta_hl_co_get_num_of_mdep(uint8_t app_id, uint8_t* p_num_of_mdep); |
| /******************************************************************************* |
| * |
| * Function bta_hl_co_advrtise_source_sdp |
| * |
| * Description This function is called to find out whether the SOURCE MDEP |
| * configuration information should be advertize in the SDP or |
| *nopt |
| * |
| * Parameters app_id - application ID |
| * |
| * Returns Bloolean - true advertise the SOURCE MDEP configuration |
| * information |
| * |
| ******************************************************************************/ |
| extern bool bta_hl_co_advrtise_source_sdp(uint8_t app_id); |
| /******************************************************************************* |
| * |
| * Function bta_hl_co_get_mdep_config |
| * |
| * Description This function is called to get the supported feature |
| * configuration for the specified mdep index and it also |
| *assigns |
| * the MDEP ID for the specified mdep index |
| * |
| * Parameters app_id - HDP application ID |
| * mdep_idx - the mdep index |
| * mdep_counter - mdep_counter |
| * mdep_id - the assigned MDEP ID for the specified medp_idx |
| * p_mdl_cfg (output) - pointer to the MDEP configuration |
| * |
| * |
| * Returns Bloolean - true success |
| ******************************************************************************/ |
| extern bool bta_hl_co_get_mdep_config(uint8_t app_id, uint8_t mdep_idx, |
| uint8_t mdep_counter, |
| tBTA_HL_MDEP_ID mdep_id, |
| tBTA_HL_MDEP_CFG* p_mdep_cfg); |
| |
| /******************************************************************************* |
| * |
| * Function bta_hl_co_get_echo_config |
| * |
| * Description This function is called to get the echo test |
| * maximum APDU size configuration |
| * |
| * Parameters app_id - HDP application ID |
| * p_echo_cfg (output) - pointer to the Echo test maximum APDU |
| *size |
| * configuration |
| * |
| * Returns Bloolean - true success |
| ******************************************************************************/ |
| extern bool bta_hl_co_get_echo_config(uint8_t app_id, |
| tBTA_HL_ECHO_CFG* p_echo_cfg); |
| |
| /******************************************************************************* |
| * |
| * Function bta_hl_co_save_mdl |
| * |
| * Description This function is called to save a MDL configuration item in |
| *persistent |
| * storage |
| * |
| * Parameters app_id - HDP application ID |
| * item_idx - the MDL configuration storage index |
| * p_mdl_cfg - pointer to the MDL configuration data |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void bta_hl_co_save_mdl(uint8_t app_id, uint8_t item_idx, |
| tBTA_HL_MDL_CFG* p_mdl_cfg); |
| /******************************************************************************* |
| * |
| * Function bta_hl_co_delete_mdl |
| * |
| * Description This function is called to delete a MDL configuration item in |
| *persistent |
| * storage |
| * |
| * Parameters app_id - HDP application ID |
| * item_idx - the MDL configuration storage index |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void bta_hl_co_delete_mdl(uint8_t app_id, uint8_t item_idx); |
| /******************************************************************************* |
| * |
| * Function bta_hl_co_get_mdl_config |
| * |
| * Description This function is called to get the MDL configuration |
| * from teh persistent memory. This function shall only be |
| *called |
| *8 once after the device is powered up |
| * |
| * Parameters app_id - HDP application ID |
| * buffer_size - the unit of the buffer size is |
| *sizeof(tBTA_HL_MDL_CFG) |
| * p_mdl_buf - Point to the starting location of the buffer |
| * |
| * Returns bool |
| * |
| * |
| ******************************************************************************/ |
| extern bool bta_hl_co_load_mdl_config(uint8_t app_id, uint8_t buffer_size, |
| tBTA_HL_MDL_CFG* p_mdl_buf); |
| |
| /******************************************************************************* |
| * |
| * Function bta_hl_co_get_tx_data |
| * |
| * Description Get the data to be sent |
| * |
| * Parameters app_id - HDP application ID |
| * mdl_handle - MDL handle |
| * buf_size - the size of the buffer |
| * p_buf - the buffer pointer |
| * evt - the evt to be passed back to the HL in the |
| * bta_hl_ci_get_tx_data call-in function |
| * |
| * Returns Void |
| * |
| ******************************************************************************/ |
| extern void bta_hl_co_get_tx_data(uint8_t app_id, tBTA_HL_MDL_HANDLE mdl_handle, |
| uint16_t buf_size, uint8_t* p_buf, |
| uint16_t evt); |
| |
| /******************************************************************************* |
| * |
| * Function bta_hl_co_put_rx_data |
| * |
| * Description Put the received data |
| * |
| * Parameters app_id - HDP application ID |
| * mdl_handle - MDL handle |
| * data_size - the size of the data |
| * p_data - the data pointer |
| * evt - the evt to be passed back to the HL in the |
| * bta_hl_ci_put_rx_data call-in function |
| * |
| * Returns Void |
| * |
| ******************************************************************************/ |
| extern void bta_hl_co_put_rx_data(uint8_t app_id, tBTA_HL_MDL_HANDLE mdl_handle, |
| uint16_t data_size, uint8_t* p_data, |
| uint16_t evt); |
| /******************************************************************************* |
| * |
| * Function bta_hl_co_get_tx_data |
| * |
| * Description Get the Echo data to be sent |
| * |
| * Parameters app_id - HDP application ID |
| * mcl_handle - MCL handle |
| * buf_size - the size of the buffer |
| * p_buf - the buffer pointer |
| * evt - the evt to be passed back to the HL in the |
| * bta_hl_ci_get_tx_data call-in function |
| * |
| * Returns Void |
| * |
| ******************************************************************************/ |
| extern void bta_hl_co_get_echo_data(uint8_t app_id, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| uint16_t buf_size, uint8_t* p_buf, |
| uint16_t evt); |
| |
| /******************************************************************************* |
| * |
| * Function bta_hl_co_put_echo_data |
| * |
| * Description Put the received loopback echo data |
| * |
| * Parameters app_id - HDP application ID |
| * mcl_handle - MCL handle |
| * data_size - the size of the data |
| * p_data - the data pointer |
| * evt - the evt to be passed back to the HL in the |
| * bta_hl_ci_put_echo_data call-in function |
| * |
| * Returns Void |
| * |
| ******************************************************************************/ |
| extern void bta_hl_co_put_echo_data(uint8_t app_id, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| uint16_t data_size, uint8_t* p_data, |
| uint16_t evt); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* BTA_HL_CO_H */ |