| /****************************************************************************** |
| * |
| * Copyright 2002-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This interface file contains the interface to the Audio Video |
| * Distribution Transport Protocol (AVDTP). |
| * |
| ******************************************************************************/ |
| #ifndef AVDT_API_H |
| #define AVDT_API_H |
| |
| #include "bt_target.h" |
| #include "bt_types.h" |
| |
| /***************************************************************************** |
| * Constants |
| ****************************************************************************/ |
| #ifndef AVDT_VERSION |
| #define AVDT_VERSION 0x0102 |
| #endif |
| #define AVDT_VERSION_1_3 0x0103 |
| |
| /* Maximum size in bytes of the codec capabilities information element. */ |
| #define AVDT_CODEC_SIZE 20 |
| |
| /* API function return value result codes. */ |
| #define AVDT_SUCCESS 0 /* Function successful */ |
| #define AVDT_BAD_PARAMS 1 /* Invalid parameters */ |
| #define AVDT_NO_RESOURCES 2 /* Not enough resources */ |
| #define AVDT_BAD_HANDLE 3 /* Bad handle */ |
| #define AVDT_BUSY 4 /* A procedure is already in progress */ |
| #define AVDT_WRITE_FAIL 5 /* Write failed */ |
| |
| /* The index to access the codec type in codec_info[]. */ |
| #define AVDT_CODEC_TYPE_INDEX 2 |
| |
| /* The size in bytes of a Adaptation Layer header. */ |
| #define AVDT_AL_HDR_SIZE 3 |
| |
| /* The size in bytes of a media packet header. */ |
| #define AVDT_MEDIA_HDR_SIZE 12 |
| |
| /* The handle is used when reporting MULTI_AV specific events */ |
| #define AVDT_MULTI_AV_HANDLE 0xFF |
| |
| /* The number of bytes needed by the protocol stack for the protocol headers |
| * of a media packet. This is the size of the media packet header, the |
| * L2CAP packet header and HCI header. |
| */ |
| #define AVDT_MEDIA_OFFSET 23 |
| |
| /* The marker bit is used by the application to mark significant events such |
| * as frame boundaries in the data stream. This constant is used to check or |
| * set the marker bit in the m_pt parameter of an AVDT_WriteReq() |
| * or AVDT_DATA_IND_EVT. |
| */ |
| #define AVDT_MARKER_SET 0x80 |
| |
| /* SEP Type. This indicates the stream endpoint type. */ |
| #define AVDT_TSEP_SRC 0 /* Source SEP */ |
| #define AVDT_TSEP_SNK 1 /* Sink SEP */ |
| #define AVDT_TSEP_INVALID 3 /* Invalid SEP */ |
| |
| /* initiator/acceptor role for adaption */ |
| #define AVDT_INT 0 /* initiator */ |
| #define AVDT_ACP 1 /* acceptor */ |
| |
| /* Media Type of the stream endpoint */ |
| /* The value does not include the reserved 4-bit LSBs field */ |
| #define AVDT_MEDIA_TYPE_AUDIO 0 /* Audio SEP */ |
| #define AVDT_MEDIA_TYPE_VIDEO 1 /* Video SEP */ |
| #define AVDT_MEDIA_TYPE_MULTI 2 /* Multimedia SEP */ |
| |
| /* for reporting packets (packet types) */ |
| #define AVDT_RTCP_PT_SR 200 /* SR (Sender Report) */ |
| #define AVDT_RTCP_PT_RR 201 /* RR (Receiver Report) */ |
| #define AVDT_RTCP_PT_SDES 202 /* SDES (Source Description) */ |
| typedef uint8_t AVDT_REPORT_TYPE; |
| |
| #define AVDT_RTCP_SDES_CNAME 1 /* SDES item CNAME */ |
| #ifndef AVDT_MAX_CNAME_SIZE |
| #define AVDT_MAX_CNAME_SIZE 28 |
| #endif |
| |
| /* Protocol service capabilities. This indicates the protocol service |
| * capabilities of a stream endpoint. This value is a mask. |
| * Multiple values can be combined with a bitwise OR. |
| */ |
| #define AVDT_PSC_TRANS (1 << 1) /* Media transport */ |
| #define AVDT_PSC_REPORT (1 << 2) /* Reporting */ |
| #define AVDT_PSC_RECOV (1 << 3) /* Recovery */ |
| #define AVDT_PSC_HDRCMP (1 << 5) /* Header compression */ |
| #define AVDT_PSC_MUX (1 << 6) /* Multiplexing */ |
| #define AVDT_PSC_DELAY_RPT (1 << 8) /* Delay Report */ |
| |
| /* Recovery type. This indicates the recovery type. */ |
| #define AVDT_RECOV_RFC2733 1 /* RFC2733 recovery */ |
| |
| /* Header compression capabilities. This indicates the header compression |
| * capabilities. This value is a mask. Multiple values can be combined |
| * with a bitwise OR. |
| */ |
| #define AVDT_HDRCMP_MEDIA (1 << 5) /* Available for media packets */ |
| #define AVDT_HDRCMP_RECOV (1 << 6) /* Available for recovery packets */ |
| #define AVDT_HDRCMP_BACKCH (1 << 7) /* Back channel supported */ |
| |
| /* Multiplexing capabilities mask. */ |
| #define AVDT_MUX_FRAG (1 << 7) /* Allow Adaptation Layer Fragmentation */ |
| |
| /* Application service category. This indicates the application |
| * service category. |
| */ |
| #define AVDT_ASC_PROTECT 4 /* Content protection */ |
| #define AVDT_ASC_CODEC 7 /* Codec */ |
| |
| /* the content protection IDs assigned by BT SIG */ |
| #define AVDT_CP_SCMS_T_ID 0x0002 |
| #define AVDT_CP_DTCP_ID 0x0001 |
| |
| #define AVDT_CP_LOSC 2 |
| #define AVDT_CP_INFO_LEN 3 |
| |
| #define AVDT_CP_SCMS_COPY_MASK 3 |
| #define AVDT_CP_SCMS_COPY_FREE 2 |
| #define AVDT_CP_SCMS_COPY_ONCE 1 |
| #define AVDT_CP_SCMS_COPY_NEVER 0 |
| |
| /* Error codes. The following are error codes defined in the AVDTP and GAVDP |
| * specifications. These error codes communicate protocol errors between |
| * AVDTP and the application. More detailed descriptions of the error codes |
| * and their appropriate use can be found in the AVDTP and GAVDP specifications. |
| * These error codes are unrelated to the result values returned by the |
| * AVDTP API functions. |
| */ |
| /* Bad packet header format */ |
| #define AVDT_ERR_HEADER 0x01 |
| /* Bad packet length */ |
| #define AVDT_ERR_LENGTH 0x11 |
| /* Invalid SEID */ |
| #define AVDT_ERR_SEID 0x12 |
| /* The SEP is in use */ |
| #define AVDT_ERR_IN_USE 0x13 |
| /* The SEP is not in use */ |
| #define AVDT_ERR_NOT_IN_USE 0x14 |
| /* Bad service category */ |
| #define AVDT_ERR_CATEGORY 0x17 |
| /* Bad payload format */ |
| #define AVDT_ERR_PAYLOAD 0x18 |
| /* Requested command not supported */ |
| #define AVDT_ERR_NSC 0x19 |
| /* Reconfigure attempted invalid capabilities */ |
| #define AVDT_ERR_INVALID_CAP 0x1A |
| /* Requested recovery type not defined */ |
| #define AVDT_ERR_RECOV_TYPE 0x22 |
| /* Media transport capability not correct */ |
| #define AVDT_ERR_MEDIA_TRANS 0x23 |
| /* Recovery service capability not correct */ |
| #define AVDT_ERR_RECOV_FMT 0x25 |
| /* Header compression service capability not correct */ |
| #define AVDT_ERR_ROHC_FMT 0x26 |
| /* Content protection service capability not correct */ |
| #define AVDT_ERR_CP_FMT 0x27 |
| /* Multiplexing service capability not correct */ |
| #define AVDT_ERR_MUX_FMT 0x28 |
| /* Configuration not supported */ |
| #define AVDT_ERR_UNSUP_CFG 0x29 |
| /* Message cannot be processed in this state */ |
| #define AVDT_ERR_BAD_STATE 0x31 |
| /* Report service capability not correct */ |
| #define AVDT_ERR_REPORT_FMT 0x65 |
| /* Invalid service category */ |
| #define AVDT_ERR_SERVICE 0x80 |
| /* Insufficient resources */ |
| #define AVDT_ERR_RESOURCE 0x81 |
| /* Invalid Media Codec Type */ |
| #define AVDT_ERR_INVALID_MCT 0xC1 |
| /* Unsupported Media Codec Type */ |
| #define AVDT_ERR_UNSUP_MCT 0xC2 |
| /* Invalid Level */ |
| #define AVDT_ERR_INVALID_LEVEL 0xC3 |
| /* Unsupported Level */ |
| #define AVDT_ERR_UNSUP_LEVEL 0xC4 |
| /* Invalid Content Protection Type */ |
| #define AVDT_ERR_INVALID_CP 0xE0 |
| /* Invalid Content Protection format */ |
| #define AVDT_ERR_INVALID_FORMAT 0xE1 |
| |
| /* Additional error codes. This indicates error codes used by AVDTP |
| * in addition to the ones defined in the specifications. |
| */ |
| #define AVDT_ERR_CONNECT 0x07 /* Connection failed. */ |
| #define AVDT_ERR_TIMEOUT 0x08 /* Response timeout. */ |
| |
| /* Control callback events. */ |
| #define AVDT_DISCOVER_CFM_EVT 0 /* Discover confirm */ |
| #define AVDT_GETCAP_CFM_EVT 1 /* Get capabilities confirm */ |
| #define AVDT_OPEN_CFM_EVT 2 /* Open confirm */ |
| #define AVDT_OPEN_IND_EVT 3 /* Open indication */ |
| #define AVDT_CONFIG_IND_EVT 4 /* Configuration indication */ |
| #define AVDT_START_CFM_EVT 5 /* Start confirm */ |
| #define AVDT_START_IND_EVT 6 /* Start indication */ |
| #define AVDT_SUSPEND_CFM_EVT 7 /* Suspend confirm */ |
| #define AVDT_SUSPEND_IND_EVT 8 /* Suspend indication */ |
| #define AVDT_CLOSE_CFM_EVT 9 /* Close confirm */ |
| #define AVDT_CLOSE_IND_EVT 10 /* Close indication */ |
| #define AVDT_RECONFIG_CFM_EVT 11 /* Reconfiguration confirm */ |
| #define AVDT_RECONFIG_IND_EVT 12 /* Reconfiguration indication */ |
| #define AVDT_SECURITY_CFM_EVT 13 /* Security confirm */ |
| #define AVDT_SECURITY_IND_EVT 14 /* Security indication */ |
| #define AVDT_WRITE_CFM_EVT 15 /* Write confirm */ |
| #define AVDT_CONNECT_IND_EVT 16 /* Signaling channel connected */ |
| #define AVDT_DISCONNECT_IND_EVT 17 /* Signaling channel disconnected */ |
| #define AVDT_REPORT_CONN_EVT 18 /* Reporting channel connected */ |
| #define AVDT_REPORT_DISCONN_EVT 19 /* Reporting channel disconnected */ |
| #define AVDT_DELAY_REPORT_EVT 20 /* Delay report received */ |
| #define AVDT_DELAY_REPORT_CFM_EVT 21 /* Delay report response received */ |
| |
| #define AVDT_MAX_EVT (AVDT_DELAY_REPORT_CFM_EVT) |
| |
| /* PSM for AVDT */ |
| #define AVDT_PSM 0x0019 |
| |
| /***************************************************************************** |
| * Type Definitions |
| ****************************************************************************/ |
| |
| typedef struct { |
| uint32_t ntp_sec; /* NTP time: seconds relative to 0h UTC on 1 January 1900 */ |
| uint32_t ntp_frac; /* NTP time: the fractional part */ |
| uint32_t rtp_time; /* timestamp in RTP header */ |
| uint32_t pkt_count; /* sender's packet count: since starting transmission |
| * up until the time this SR packet was generated. */ |
| uint32_t octet_count; /* sender's octet count: same comment */ |
| } tAVDT_SENDER_INFO; |
| |
| typedef struct { |
| uint8_t frag_lost; /* fraction lost since last RR */ |
| uint32_t |
| packet_lost; /* cumulative number of packets lost since the beginning */ |
| uint32_t seq_num_rcvd; /* extended highest sequence number received */ |
| uint32_t jitter; /* interarrival jitter */ |
| uint32_t lsr; /* last SR timestamp */ |
| uint32_t dlsr; /* delay since last SR */ |
| } tAVDT_REPORT_BLK; |
| |
| typedef union { |
| tAVDT_SENDER_INFO sr; |
| tAVDT_REPORT_BLK rr; |
| uint8_t cname[AVDT_MAX_CNAME_SIZE + 1]; |
| } tAVDT_REPORT_DATA; |
| |
| /** |
| * AVDTP Registration Control Block. |
| */ |
| class AvdtpRcb { |
| public: |
| AvdtpRcb() |
| : ctrl_mtu(0), |
| ret_tout(0), |
| sig_tout(0), |
| idle_tout(0), |
| sec_mask(0), |
| scb_index(0) {} |
| AvdtpRcb& operator=(const AvdtpRcb&) = default; |
| |
| void Reset() { |
| ctrl_mtu = 0; |
| ret_tout = 0; |
| sig_tout = 0; |
| idle_tout = 0; |
| sec_mask = 0; |
| scb_index = 0; |
| } |
| |
| uint16_t ctrl_mtu; /* L2CAP MTU of the AVDTP signaling channel */ |
| uint8_t ret_tout; /* AVDTP signaling retransmission timeout */ |
| uint8_t sig_tout; /* AVDTP signaling message timeout */ |
| uint8_t idle_tout; /* AVDTP idle signaling channel timeout */ |
| uint8_t sec_mask; /* Security mask for BTM_SetSecurityLevel() */ |
| uint8_t scb_index; /* The Stream Control Block index */ |
| }; |
| |
| /* This structure contains the SEP information. This information is |
| * transferred during the discovery procedure. |
| */ |
| typedef struct { |
| bool in_use; /* true if stream is currently in use */ |
| uint8_t seid; /* Stream endpoint identifier */ |
| uint8_t media_type; /* Media type: AVDT_MEDIA_TYPE_* */ |
| uint8_t tsep; /* SEP type */ |
| } tAVDT_SEP_INFO; |
| |
| /** |
| * AVDTP SEP Configuration. |
| */ |
| class AvdtpSepConfig { |
| public: |
| AvdtpSepConfig() |
| : codec_info{}, |
| protect_info{}, |
| num_codec(0), |
| num_protect(0), |
| psc_mask(0), |
| recov_type(0), |
| recov_mrws(0), |
| recov_mnmp(0), |
| hdrcmp_mask(0) {} |
| AvdtpSepConfig& operator=(const AvdtpSepConfig&) = default; |
| |
| void Reset() { |
| memset(codec_info, 0, sizeof(codec_info)); |
| memset(protect_info, 0, sizeof(protect_info)); |
| num_codec = 0; |
| num_protect = 0; |
| psc_mask = 0; |
| recov_type = 0; |
| recov_mrws = 0; |
| recov_mnmp = 0; |
| hdrcmp_mask = 0; |
| } |
| |
| uint8_t codec_info[AVDT_CODEC_SIZE]; /* Codec capabilities array */ |
| uint8_t protect_info[AVDT_PROTECT_SIZE]; /* Content protection capabilities */ |
| uint8_t num_codec; /* Number of media codec information elements */ |
| uint8_t num_protect; /* Number of content protection information elements */ |
| uint16_t psc_mask; /* Protocol service capabilities mask */ |
| uint8_t recov_type; /* Recovery type */ |
| uint8_t recov_mrws; /* Maximum recovery window size */ |
| uint8_t recov_mnmp; /* Recovery maximum number of media packets */ |
| uint8_t hdrcmp_mask; /* Header compression capabilities */ |
| }; |
| |
| /* Header structure for callback event parameters. */ |
| typedef struct { |
| uint8_t |
| err_code; /* Zero if operation succeeded; nonzero if operation failed */ |
| uint8_t err_param; /* Error parameter included for some events */ |
| uint8_t label; /* Transaction label */ |
| uint8_t seid; /* For internal use only */ |
| uint8_t sig_id; /* For internal use only */ |
| uint8_t ccb_idx; /* For internal use only */ |
| } tAVDT_EVT_HDR; |
| |
| /* This data structure is associated with the AVDT_GETCAP_CFM_EVT, |
| * AVDT_RECONFIG_IND_EVT, and AVDT_RECONFIG_CFM_EVT. |
| */ |
| typedef struct { |
| tAVDT_EVT_HDR hdr; /* Event header */ |
| AvdtpSepConfig* p_cfg; /* Pointer to configuration for this SEP */ |
| } tAVDT_CONFIG; |
| |
| /* This data structure is associated with the AVDT_CONFIG_IND_EVT. */ |
| typedef struct { |
| tAVDT_EVT_HDR hdr; /* Event header */ |
| AvdtpSepConfig* p_cfg; /* Pointer to configuration for this SEP */ |
| uint8_t int_seid; /* Stream endpoint ID of stream initiating the operation */ |
| } tAVDT_SETCONFIG; |
| |
| /* This data structure is associated with the AVDT_OPEN_IND_EVT and |
| * AVDT_OPEN_CFM_EVT. */ |
| typedef struct { |
| tAVDT_EVT_HDR hdr; /* Event header */ |
| uint16_t peer_mtu; /* Transport channel L2CAP MTU of the peer */ |
| uint16_t lcid; /* L2CAP LCID for media channel */ |
| } tAVDT_OPEN; |
| |
| /* This data structure is associated with the AVDT_SECURITY_IND_EVT |
| * and AVDT_SECURITY_CFM_EVT. |
| */ |
| typedef struct { |
| tAVDT_EVT_HDR hdr; /* Event header */ |
| uint8_t* p_data; /* Pointer to security data */ |
| uint16_t len; /* Length in bytes of the security data */ |
| } tAVDT_SECURITY; |
| |
| /* This data structure is associated with the AVDT_DISCOVER_CFM_EVT. */ |
| typedef struct { |
| tAVDT_EVT_HDR hdr; /* Event header */ |
| tAVDT_SEP_INFO* p_sep_info; /* Pointer to SEP information */ |
| uint8_t num_seps; /* Number of stream endpoints */ |
| } tAVDT_DISCOVER; |
| |
| /* This data structure is associated with the AVDT_DELAY_REPORT_EVT. */ |
| typedef struct { |
| tAVDT_EVT_HDR hdr; /* Event header */ |
| uint16_t delay; /* Delay value */ |
| } tAVDT_DELAY_RPT; |
| |
| /* Union of all control callback event data structures */ |
| typedef union { |
| tAVDT_EVT_HDR hdr; |
| tAVDT_DISCOVER discover_cfm; |
| tAVDT_CONFIG getcap_cfm; |
| tAVDT_OPEN open_cfm; |
| tAVDT_OPEN open_ind; |
| tAVDT_SETCONFIG config_ind; |
| tAVDT_EVT_HDR start_cfm; |
| tAVDT_EVT_HDR suspend_cfm; |
| tAVDT_EVT_HDR close_cfm; |
| tAVDT_CONFIG reconfig_cfm; |
| tAVDT_CONFIG reconfig_ind; |
| tAVDT_SECURITY security_cfm; |
| tAVDT_SECURITY security_ind; |
| tAVDT_EVT_HDR connect_ind; |
| tAVDT_EVT_HDR disconnect_ind; |
| tAVDT_EVT_HDR report_conn; |
| tAVDT_DELAY_RPT delay_rpt_cmd; |
| } tAVDT_CTRL; |
| |
| /* This is the control callback function. This function passes control events |
| * to the application. This function is required for all registered stream |
| * endpoints and for the AVDT_DiscoverReq() and AVDT_GetCapReq() functions. |
| * |
| */ |
| typedef void(tAVDT_CTRL_CBACK)(uint8_t handle, const RawAddress& bd_addr, |
| uint8_t event, tAVDT_CTRL* p_data, |
| uint8_t scb_index); |
| |
| /* This is the data callback function. It is executed when AVDTP has a media |
| * packet ready for the application. This function is required for SNK |
| * endpoints and not applicable for SRC endpoints. |
| */ |
| typedef void(tAVDT_SINK_DATA_CBACK)(uint8_t handle, BT_HDR* p_pkt, |
| uint32_t time_stamp, uint8_t m_pt); |
| |
| /* This is the report callback function. It is executed when AVDTP has a |
| * reporting packet ready for the application. This function is required for |
| * streams created with AVDT_PSC_REPORT. |
| */ |
| typedef void(tAVDT_REPORT_CBACK)(uint8_t handle, AVDT_REPORT_TYPE type, |
| tAVDT_REPORT_DATA* p_data); |
| |
| /** |
| * AVDTP Stream Configuration. |
| * The information is used when a stream is created. |
| */ |
| class AvdtpStreamConfig { |
| public: |
| // |
| // Non-supported protocol command messages |
| // |
| // Suspend command not supported |
| static constexpr int AVDT_NSC_SUSPEND = 0x01; |
| // Reconfigure command not supported |
| static constexpr int AVDT_NSC_RECONFIG = 0x02; |
| // Security command not supported |
| static constexpr int AVDT_NSC_SECURITY = 0x04; |
| |
| AvdtpStreamConfig() |
| : p_avdt_ctrl_cback(nullptr), |
| scb_index(0), |
| p_sink_data_cback(nullptr), |
| p_report_cback(nullptr), |
| mtu(0), |
| flush_to(0), |
| tsep(0), |
| media_type(0), |
| nsc_mask(0) {} |
| |
| void Reset() { |
| cfg.Reset(); |
| p_avdt_ctrl_cback = nullptr; |
| scb_index = 0; |
| p_sink_data_cback = nullptr; |
| p_report_cback = nullptr; |
| mtu = 0; |
| flush_to = 0; |
| tsep = 0; |
| media_type = 0; |
| nsc_mask = 0; |
| } |
| |
| AvdtpSepConfig cfg; // SEP configuration |
| tAVDT_CTRL_CBACK* p_avdt_ctrl_cback; // Control callback function |
| uint8_t scb_index; // The index to the bta_av_cb.p_scb[] entry |
| tAVDT_SINK_DATA_CBACK* p_sink_data_cback; // Sink data callback function |
| tAVDT_REPORT_CBACK* p_report_cback; // Report callback function |
| uint16_t mtu; // The L2CAP MTU of the transport channel |
| uint16_t flush_to; // The L2CAP flush timeout of the transport channel |
| uint8_t tsep; // SEP type |
| uint8_t media_type; // Media type: AVDT_MEDIA_TYPE_* |
| uint16_t nsc_mask; // Nonsupported protocol command messages |
| }; |
| |
| /* AVDT data option mask is used in the write request */ |
| #define AVDT_DATA_OPT_NONE 0x00 /* No option still add RTP header */ |
| #define AVDT_DATA_OPT_NO_RTP (0x01 << 0) /* Skip adding RTP header */ |
| |
| typedef uint8_t tAVDT_DATA_OPT_MASK; |
| |
| /***************************************************************************** |
| * External Function Declarations |
| ****************************************************************************/ |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_Register |
| * |
| * Description This is the system level registration function for the |
| * AVDTP protocol. This function initializes AVDTP and |
| * prepares the protocol stack for its use. This function |
| * must be called once by the system or platform using AVDTP |
| * before the other functions of the API an be used. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void AVDT_Register(AvdtpRcb* p_reg, tAVDT_CTRL_CBACK* p_cback); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_Deregister |
| * |
| * Description This function is called to deregister use AVDTP protocol. |
| * It is called when AVDTP is no longer being used by any |
| * application in the system. Before this function can be |
| * called, all streams must be removed with AVDT_RemoveStream. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void AVDT_Deregister(void); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_AbortReq |
| * |
| * Description Trigger Abort request to pass AVDTP Abort related mandatory |
| * PTS Test case. |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void AVDT_AbortReq(uint8_t handle); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_CreateStream |
| * |
| * Description Create a stream endpoint. After a stream endpoint is |
| * created an application can initiate a connection between |
| * this endpoint and an endpoint on a peer device. In |
| * addition, a peer device can discover, get the capabilities, |
| * and connect to this endpoint. |
| * |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_CreateStream(uint8_t peer_id, uint8_t* p_handle, |
| const AvdtpStreamConfig& avdtp_stream_config); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_RemoveStream |
| * |
| * Description Remove a stream endpoint. This function is called when |
| * the application is no longer using a stream endpoint. |
| * If this function is called when the endpoint is connected |
| * the connection is closed and then the stream endpoint |
| * is removed. |
| * |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_RemoveStream(uint8_t handle); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_DiscoverReq |
| * |
| * Description This function initiates a connection to the AVDTP service |
| * on the peer device, if not already present, and discovers |
| * the stream endpoints on the peer device. (Please note |
| * that AVDTP discovery is unrelated to SDP discovery). |
| * This function can be called at any time regardless of |
| * whether there is an AVDTP connection to the peer device. |
| * |
| * When discovery is complete, an AVDT_DISCOVER_CFM_EVT |
| * is sent to the application via its callback function. |
| * The application must not call AVDT_GetCapReq() or |
| * AVDT_DiscoverReq() again to the same device until |
| * discovery is complete. |
| * |
| * The memory addressed by sep_info is allocated by the |
| * application. This memory is written to by AVDTP as part |
| * of the discovery procedure. This memory must remain |
| * accessible until the application receives the |
| * AVDT_DISCOVER_CFM_EVT. |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_DiscoverReq(const RawAddress& bd_addr, |
| uint8_t channel_index, |
| tAVDT_SEP_INFO* p_sep_info, uint8_t max_seps, |
| tAVDT_CTRL_CBACK* p_cback); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_GetCapReq |
| * |
| * Description This function initiates a connection to the AVDTP service |
| * on the peer device, if not already present, and gets the |
| * capabilities of a stream endpoint on the peer device. |
| * This function can be called at any time regardless of |
| * whether there is an AVDTP connection to the peer device. |
| * |
| * When the procedure is complete, an AVDT_GETCAP_CFM_EVT is |
| * sent to the application via its callback function. The |
| * application must not call AVDT_GetCapReq() or |
| * AVDT_DiscoverReq() again until the procedure is complete. |
| * |
| * The memory pointed to by p_cfg is allocated by the |
| * application. This memory is written to by AVDTP as part |
| * of the get capabilities procedure. This memory must |
| * remain accessible until the application receives |
| * the AVDT_GETCAP_CFM_EVT. |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_GetCapReq(const RawAddress& bd_addr, uint8_t channel_index, |
| uint8_t seid, AvdtpSepConfig* p_cfg, |
| tAVDT_CTRL_CBACK* p_cback, bool get_all_cap); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_DelayReport |
| * |
| * Description This functions sends a Delay Report to the peer device |
| * that is associated with a particular SEID. |
| * This function is called by SNK device. |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_DelayReport(uint8_t handle, uint8_t seid, uint16_t delay); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_OpenReq |
| * |
| * Description This function initiates a connection to the AVDTP service |
| * on the peer device, if not already present, and connects |
| * to a stream endpoint on a peer device. When the connection |
| * is completed, an AVDT_OPEN_CFM_EVT is sent to the |
| * application via the control callback function for this |
| * handle. |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_OpenReq(uint8_t handle, const RawAddress& bd_addr, |
| uint8_t channel_index, uint8_t seid, |
| AvdtpSepConfig* p_cfg); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_ConfigRsp |
| * |
| * Description Respond to a configure request from the peer device. This |
| * function must be called if the application receives an |
| * AVDT_CONFIG_IND_EVT through its control callback. |
| * |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_ConfigRsp(uint8_t handle, uint8_t label, |
| uint8_t error_code, uint8_t category); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_StartReq |
| * |
| * Description Start one or more stream endpoints. This initiates the |
| * transfer of media packets for the streams. All stream |
| * endpoints must previously be opened. When the streams |
| * are started, an AVDT_START_CFM_EVT is sent to the |
| * application via the control callback function for each |
| * stream. |
| * |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_StartReq(uint8_t* p_handles, uint8_t num_handles); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_SuspendReq |
| * |
| * Description Suspend one or more stream endpoints. This suspends the |
| * transfer of media packets for the streams. All stream |
| * endpoints must previously be open and started. When the |
| * streams are suspended, an AVDT_SUSPEND_CFM_EVT is sent to |
| * the application via the control callback function for |
| * each stream. |
| * |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_SuspendReq(uint8_t* p_handles, uint8_t num_handles); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_CloseReq |
| * |
| * Description Close a stream endpoint. This stops the transfer of media |
| * packets and closes the transport channel associated with |
| * this stream endpoint. When the stream is closed, an |
| * AVDT_CLOSE_CFM_EVT is sent to the application via the |
| * control callback function for this handle. |
| * |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_CloseReq(uint8_t handle); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_ReconfigReq |
| * |
| * Description Reconfigure a stream endpoint. This allows the application |
| * to change the codec or content protection capabilities of |
| * a stream endpoint after it has been opened. This function |
| * can only be called if the stream is opened but not started |
| * or if the stream has been suspended. When the procedure |
| * is completed, an AVDT_RECONFIG_CFM_EVT is sent to the |
| * application via the control callback function for this |
| * handle. |
| * |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_ReconfigReq(uint8_t handle, AvdtpSepConfig* p_cfg); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_ReconfigRsp |
| * |
| * Description Respond to a reconfigure request from the peer device. |
| * This function must be called if the application receives |
| * an AVDT_RECONFIG_IND_EVT through its control callback. |
| * |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_ReconfigRsp(uint8_t handle, uint8_t label, |
| uint8_t error_code, uint8_t category); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_SecurityReq |
| * |
| * Description Send a security request to the peer device. When the |
| * security procedure is completed, an AVDT_SECURITY_CFM_EVT |
| * is sent to the application via the control callback function |
| * for this handle. (Please note that AVDTP security |
| * procedures are unrelated to Bluetooth link level security.) |
| * |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_SecurityReq(uint8_t handle, uint8_t* p_data, uint16_t len); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_SecurityRsp |
| * |
| * Description Respond to a security request from the peer device. |
| * This function must be called if the application receives |
| * an AVDT_SECURITY_IND_EVT through its control callback. |
| * (Please note that AVDTP security procedures are unrelated |
| * to Bluetooth link level security.) |
| * |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_SecurityRsp(uint8_t handle, uint8_t label, |
| uint8_t error_code, uint8_t* p_data, |
| uint16_t len); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_WriteReq |
| * |
| * Description Send a media packet to the peer device. The stream must |
| * be started before this function is called. Also, this |
| * function can only be called if the stream is a SRC. |
| * |
| * When AVDTP has sent the media packet and is ready for the |
| * next packet, an AVDT_WRITE_CFM_EVT is sent to the |
| * application via the control callback. The application must |
| * wait for the AVDT_WRITE_CFM_EVT before it makes the next |
| * call to AVDT_WriteReq(). If the applications calls |
| * AVDT_WriteReq() before it receives the event the packet |
| * will not be sent. The application may make its first call |
| * to AVDT_WriteReq() after it receives an AVDT_START_CFM_EVT |
| * or AVDT_START_IND_EVT. |
| * |
| * The application passes the packet using the BT_HDR |
| * structure. |
| * This structure is described in section 2.1. The offset |
| * field must be equal to or greater than AVDT_MEDIA_OFFSET. |
| * This allows enough space in the buffer for the L2CAP and |
| * AVDTP headers. |
| * |
| * The memory pointed to by p_pkt must be a GKI buffer |
| * allocated by the application. This buffer will be freed |
| * by the protocol stack; the application must not free |
| * this buffer. |
| * |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_WriteReq(uint8_t handle, BT_HDR* p_pkt, |
| uint32_t time_stamp, uint8_t m_pt); |
| /******************************************************************************* |
| * |
| * Function AVDT_WriteReqOpt |
| * |
| * Description Send a media packet to the peer device. The stream must |
| * be started before this function is called. Also, this |
| * function can only be called if the stream is a SRC |
| * |
| * When AVDTP has sent the media packet and is ready for the |
| * next packet, an AVDT_WRITE_CFM_EVT is sent to the |
| * application via the control callback. The application must |
| * wait for the AVDT_WRITE_CFM_EVT before it makes the next |
| * call to AVDT_WriteReq(). If the applications calls |
| * AVDT_WriteReq() before it receives the event the packet |
| * will not be sent. The application may make its first call |
| * to AVDT_WriteReq() after it receives an AVDT_START_CFM_EVT |
| * or AVDT_START_IND_EVT. |
| * |
| * The application passes the packet using the BT_HDR structure |
| * This structure is described in section 2.1. The offset |
| * field must be equal to or greater than AVDT_MEDIA_OFFSET |
| * (if NO_RTP is specified, L2CAP_MIN_OFFSET can be used) |
| * This allows enough space in the buffer for the L2CAP and |
| * AVDTP headers. |
| * |
| * The memory pointed to by p_pkt must be a GKI buffer |
| * allocated by the application. This buffer will be freed |
| * by the protocol stack; the application must not free |
| * this buffer. |
| * |
| * The opt parameter allows passing specific options like: |
| * - NO_RTP : do not add the RTP header to buffer |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_WriteReqOpt(uint8_t handle, BT_HDR* p_pkt, |
| uint32_t time_stamp, uint8_t m_pt, |
| tAVDT_DATA_OPT_MASK opt); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_ConnectReq |
| * |
| * Description This function initiates an AVDTP signaling connection |
| * to the peer device. When the connection is completed, an |
| * AVDT_CONNECT_IND_EVT is sent to the application via its |
| * control callback function. If the connection attempt fails |
| * an AVDT_DISCONNECT_IND_EVT is sent. The security mask |
| * parameter overrides the outgoing security mask set in |
| * AVDT_Register(). |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_ConnectReq(const RawAddress& bd_addr, |
| uint8_t channel_index, uint8_t sec_mask, |
| tAVDT_CTRL_CBACK* p_cback); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_DisconnectReq |
| * |
| * Description This function disconnect an AVDTP signaling connection |
| * to the peer device. When disconnected an |
| * AVDT_DISCONNECT_IND_EVT is sent to the application via its |
| * control callback function. |
| * |
| * Returns AVDT_SUCCESS if successful, otherwise error. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_DisconnectReq(const RawAddress& bd_addr, |
| tAVDT_CTRL_CBACK* p_cback); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_GetL2CapChannel |
| * |
| * Description Get the L2CAP CID used by the handle. |
| * |
| * Returns CID if successful, otherwise 0. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_GetL2CapChannel(uint8_t handle); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_GetSignalChannel |
| * |
| * Description Get the L2CAP CID used by the signal channel of the given |
| * handle. |
| * |
| * Returns CID if successful, otherwise 0. |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_GetSignalChannel(uint8_t handle, |
| const RawAddress& bd_addr); |
| |
| /******************************************************************************* |
| * |
| * Function AVDT_SendReport |
| * |
| * Description |
| * |
| * |
| * |
| * Returns |
| * |
| ******************************************************************************/ |
| extern uint16_t AVDT_SendReport(uint8_t handle, AVDT_REPORT_TYPE type, |
| tAVDT_REPORT_DATA* p_data); |
| |
| /****************************************************************************** |
| * |
| * Function AVDT_SetTraceLevel |
| * |
| * Description Sets the trace level for AVDT. If 0xff is passed, the |
| * current trace level is returned. |
| * |
| * Input Parameters: |
| * new_level: The level to set the AVDT tracing to: |
| * 0xff-returns the current setting. |
| * 0-turns off tracing. |
| * >= 1-Errors. |
| * >= 2-Warnings. |
| * >= 3-APIs. |
| * >= 4-Events. |
| * >= 5-Debug. |
| * |
| * Returns The new trace level or current trace level if |
| * the input parameter is 0xff. |
| * |
| *****************************************************************************/ |
| extern uint8_t AVDT_SetTraceLevel(uint8_t new_level); |
| |
| /** |
| * Dump debug-related information for the Stack AVDTP module. |
| * |
| * @param fd the file descriptor to use for writing the ASCII formatted |
| * information |
| */ |
| void stack_debug_avdtp_api_dump(int fd); |
| |
| #endif /* AVDT_API_H */ |