| /****************************************************************************** |
| * |
| * Copyright (C) 2003-2014 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This is the API implementation file for the BTA device manager. |
| * |
| ******************************************************************************/ |
| |
| #include "bt_common.h" |
| #include "bta_sys.h" |
| #include "bta_api.h" |
| #include "bta_dm_int.h" |
| #include "bta_sys_int.h" |
| #include "btm_api.h" |
| #include "btm_int.h" |
| #include <string.h> |
| #include "utl.h" |
| |
| /***************************************************************************** |
| ** Constants |
| *****************************************************************************/ |
| |
| static const tBTA_SYS_REG bta_dm_reg = |
| { |
| bta_dm_sm_execute, |
| bta_dm_sm_disable |
| }; |
| |
| static const tBTA_SYS_REG bta_dm_search_reg = |
| { |
| bta_dm_search_sm_execute, |
| bta_dm_search_sm_disable |
| }; |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_EnableBluetooth |
| ** |
| ** Description Enables bluetooth service. This function must be |
| ** called before any other functions in the BTA API are called. |
| ** |
| ** |
| ** Returns tBTA_STATUS |
| ** |
| *******************************************************************************/ |
| tBTA_STATUS BTA_EnableBluetooth(tBTA_DM_SEC_CBACK *p_cback) |
| { |
| /* Bluetooth disabling is in progress */ |
| if (bta_dm_cb.disabling) |
| return BTA_FAILURE; |
| |
| bta_dm_init_cb(); |
| |
| bta_sys_register(BTA_ID_DM, &bta_dm_reg ); |
| bta_sys_register(BTA_ID_DM_SEARCH, &bta_dm_search_reg ); |
| |
| /* if UUID list is not provided as static data */ |
| bta_sys_eir_register(bta_dm_eir_update_uuid); |
| |
| tBTA_DM_API_ENABLE *p_msg = |
| (tBTA_DM_API_ENABLE *)osi_malloc(sizeof(tBTA_DM_API_ENABLE)); |
| p_msg->hdr.event = BTA_DM_API_ENABLE_EVT; |
| p_msg->p_sec_cback = p_cback; |
| |
| bta_sys_sendmsg(p_msg); |
| |
| return BTA_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DisableBluetooth |
| ** |
| ** Description Disables bluetooth service. This function is called when |
| ** the application no longer needs bluetooth service |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| tBTA_STATUS BTA_DisableBluetooth(void) |
| { |
| BT_HDR *p_msg = (BT_HDR *)osi_malloc(sizeof(BT_HDR)); |
| |
| p_msg->event = BTA_DM_API_DISABLE_EVT; |
| |
| bta_sys_sendmsg(p_msg); |
| |
| return BTA_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_EnableTestMode |
| ** |
| ** Description Enables bluetooth device under test mode |
| ** |
| ** |
| ** Returns tBTA_STATUS |
| ** |
| *******************************************************************************/ |
| tBTA_STATUS BTA_EnableTestMode(void) |
| { |
| BT_HDR *p_msg = (BT_HDR *)osi_malloc(sizeof(BT_HDR)); |
| |
| APPL_TRACE_API("%s", __func__); |
| |
| p_msg->event = BTA_DM_API_ENABLE_TEST_MODE_EVT; |
| bta_sys_sendmsg(p_msg); |
| |
| return BTA_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DisableTestMode |
| ** |
| ** Description Disable bluetooth device under test mode |
| ** |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void BTA_DisableTestMode(void) |
| { |
| BT_HDR *p_msg = (BT_HDR *)osi_malloc(sizeof(BT_HDR)); |
| |
| APPL_TRACE_API("%s", __func__); |
| |
| p_msg->event = BTA_DM_API_DISABLE_TEST_MODE_EVT; |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmSetDeviceName |
| ** |
| ** Description This function sets the Bluetooth name of local device |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmSetDeviceName(char *p_name) |
| { |
| tBTA_DM_API_SET_NAME *p_msg = |
| (tBTA_DM_API_SET_NAME *)osi_malloc(sizeof(tBTA_DM_API_SET_NAME)); |
| |
| p_msg->hdr.event = BTA_DM_API_SET_NAME_EVT; |
| strlcpy((char*)p_msg->name, p_name, BD_NAME_LEN); |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmSetVisibility |
| ** |
| ** Description This function sets the Bluetooth connectable, |
| ** discoverable, pairable and conn paired only modes of local device |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmSetVisibility(tBTA_DM_DISC disc_mode, tBTA_DM_CONN conn_mode, uint8_t pairable_mode, uint8_t conn_filter ) |
| { |
| tBTA_DM_API_SET_VISIBILITY *p_msg = |
| (tBTA_DM_API_SET_VISIBILITY *)osi_malloc(sizeof(tBTA_DM_MSG)); |
| |
| p_msg->hdr.event = BTA_DM_API_SET_VISIBILITY_EVT; |
| p_msg->disc_mode = disc_mode; |
| p_msg->conn_mode = conn_mode; |
| p_msg->pair_mode = pairable_mode; |
| p_msg->conn_paired_only = conn_filter; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmSearch |
| ** |
| ** Description This function searches for peer Bluetooth devices. It performs |
| ** an inquiry and gets the remote name for devices. Service |
| ** discovery is done if services is non zero |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmSearch(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK services, tBTA_DM_SEARCH_CBACK *p_cback) |
| { |
| tBTA_DM_API_SEARCH *p_msg = |
| (tBTA_DM_API_SEARCH *)osi_calloc(sizeof(tBTA_DM_API_SEARCH)); |
| |
| p_msg->hdr.event = BTA_DM_API_SEARCH_EVT; |
| memcpy(&p_msg->inq_params, p_dm_inq, sizeof(tBTA_DM_INQ)); |
| p_msg->services = services; |
| p_msg->p_cback = p_cback; |
| p_msg->rs_res = BTA_DM_RS_NONE; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmSearchCancel |
| ** |
| ** Description This function cancels a search initiated by BTA_DmSearch |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmSearchCancel(void) |
| { |
| BT_HDR *p_msg = (BT_HDR *)osi_malloc(sizeof(BT_HDR)); |
| |
| p_msg->event = BTA_DM_API_SEARCH_CANCEL_EVT; |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmDiscover |
| ** |
| ** Description This function does service discovery for services of a |
| ** peer device |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmDiscover(BD_ADDR bd_addr, tBTA_SERVICE_MASK services, |
| tBTA_DM_SEARCH_CBACK *p_cback, bool sdp_search) |
| { |
| tBTA_DM_API_DISCOVER *p_msg = |
| (tBTA_DM_API_DISCOVER *)osi_calloc(sizeof(tBTA_DM_API_DISCOVER)); |
| |
| p_msg->hdr.event = BTA_DM_API_DISCOVER_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->services = services; |
| p_msg->p_cback = p_cback; |
| p_msg->sdp_search = sdp_search; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmDiscoverUUID |
| ** |
| ** Description This function does service discovery for services of a |
| ** peer device |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmDiscoverUUID(BD_ADDR bd_addr, tSDP_UUID *uuid, |
| tBTA_DM_SEARCH_CBACK *p_cback, bool sdp_search) |
| { |
| tBTA_DM_API_DISCOVER *p_msg = |
| (tBTA_DM_API_DISCOVER *)osi_malloc(sizeof(tBTA_DM_API_DISCOVER)); |
| |
| p_msg->hdr.event = BTA_DM_API_DISCOVER_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->services = BTA_USER_SERVICE_MASK; //Not exposed at API level |
| p_msg->p_cback = p_cback; |
| p_msg->sdp_search = sdp_search; |
| |
| #if (BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE) |
| p_msg->num_uuid = 0; |
| p_msg->p_uuid = NULL; |
| #endif |
| memcpy(&p_msg->uuid, uuid, sizeof(tSDP_UUID) ); |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBond |
| ** |
| ** Description This function initiates a bonding procedure with a peer |
| ** device |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmBond(BD_ADDR bd_addr) |
| { |
| tBTA_DM_API_BOND *p_msg = |
| (tBTA_DM_API_BOND *)osi_malloc(sizeof(tBTA_DM_API_BOND)); |
| |
| p_msg->hdr.event = BTA_DM_API_BOND_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->transport = BTA_TRANSPORT_UNKNOWN; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBondByTransports |
| ** |
| ** Description This function initiates a bonding procedure with a peer |
| ** device |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmBondByTransport(BD_ADDR bd_addr, tBTA_TRANSPORT transport) |
| { |
| tBTA_DM_API_BOND *p_msg = |
| (tBTA_DM_API_BOND *)osi_malloc(sizeof(tBTA_DM_API_BOND)); |
| |
| p_msg->hdr.event = BTA_DM_API_BOND_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->transport = transport; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBondCancel |
| ** |
| ** Description This function cancels the bonding procedure with a peer |
| ** device |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmBondCancel(BD_ADDR bd_addr) |
| { |
| tBTA_DM_API_BOND_CANCEL *p_msg = |
| (tBTA_DM_API_BOND_CANCEL *)osi_malloc(sizeof(tBTA_DM_API_BOND_CANCEL)); |
| |
| p_msg->hdr.event = BTA_DM_API_BOND_CANCEL_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmPinReply |
| ** |
| ** Description This function provides a pincode for a remote device when |
| ** one is requested by DM through BTA_DM_PIN_REQ_EVT |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmPinReply(BD_ADDR bd_addr, bool accept, uint8_t pin_len, uint8_t *p_pin) |
| |
| { |
| tBTA_DM_API_PIN_REPLY *p_msg = |
| (tBTA_DM_API_PIN_REPLY *)osi_malloc(sizeof(tBTA_DM_API_PIN_REPLY)); |
| |
| p_msg->hdr.event = BTA_DM_API_PIN_REPLY_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->accept = accept; |
| if (accept) { |
| p_msg->pin_len = pin_len; |
| memcpy(p_msg->p_pin, p_pin, pin_len); |
| } |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmLocalOob |
| ** |
| ** Description This function retrieves the OOB data from local controller. |
| ** The result is reported by: |
| ** - bta_dm_co_loc_oob_ext() if device supports secure |
| ** connections (SC) |
| ** - bta_dm_co_loc_oob() if device doesn't support SC |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmLocalOob(void) |
| { |
| tBTA_DM_API_LOC_OOB *p_msg = |
| (tBTA_DM_API_LOC_OOB *)osi_malloc(sizeof(tBTA_DM_API_LOC_OOB)); |
| |
| p_msg->hdr.event = BTA_DM_API_LOC_OOB_EVT; |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmConfirm |
| ** |
| ** Description This function accepts or rejects the numerical value of the |
| ** Simple Pairing process on BTA_DM_SP_CFM_REQ_EVT |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmConfirm(BD_ADDR bd_addr, bool accept) |
| { |
| tBTA_DM_API_CONFIRM *p_msg = |
| (tBTA_DM_API_CONFIRM *)osi_malloc(sizeof(tBTA_DM_API_CONFIRM)); |
| |
| p_msg->hdr.event = BTA_DM_API_CONFIRM_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->accept = accept; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmAddDevice |
| ** |
| ** Description This function adds a device to the security database list of |
| ** peer device |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmAddDevice(BD_ADDR bd_addr, DEV_CLASS dev_class, LINK_KEY link_key, |
| tBTA_SERVICE_MASK trusted_mask, bool is_trusted, |
| uint8_t key_type, tBTA_IO_CAP io_cap, uint8_t pin_length) |
| { |
| tBTA_DM_API_ADD_DEVICE *p_msg = |
| (tBTA_DM_API_ADD_DEVICE *)osi_calloc(sizeof(tBTA_DM_API_ADD_DEVICE)); |
| |
| p_msg->hdr.event = BTA_DM_API_ADD_DEVICE_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->tm = trusted_mask; |
| p_msg->is_trusted = is_trusted; |
| p_msg->io_cap = io_cap; |
| |
| if (link_key) { |
| p_msg->link_key_known = true; |
| p_msg->key_type = key_type; |
| memcpy(p_msg->link_key, link_key, LINK_KEY_LEN); |
| } |
| |
| /* Load device class if specified */ |
| if (dev_class) { |
| p_msg->dc_known = true; |
| memcpy(p_msg->dc, dev_class, DEV_CLASS_LEN); |
| } |
| |
| memset(p_msg->bd_name, 0, BD_NAME_LEN + 1); |
| memset(p_msg->features, 0, sizeof (p_msg->features)); |
| p_msg->pin_length = pin_length; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmRemoveDevice |
| ** |
| ** Description This function removes a device fromthe security database list of |
| ** peer device. It manages unpairing even while connected. |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| tBTA_STATUS BTA_DmRemoveDevice(BD_ADDR bd_addr) |
| { |
| tBTA_DM_API_REMOVE_DEVICE *p_msg = |
| (tBTA_DM_API_REMOVE_DEVICE *)osi_calloc(sizeof(tBTA_DM_API_REMOVE_DEVICE)); |
| |
| p_msg->hdr.event = BTA_DM_API_REMOVE_DEVICE_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| |
| bta_sys_sendmsg(p_msg); |
| |
| return BTA_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_GetEirService |
| ** |
| ** Description This function is called to get BTA service mask from EIR. |
| ** |
| ** Parameters p_eir - pointer of EIR significant part |
| ** p_services - return the BTA service mask |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| extern const uint16_t bta_service_id_to_uuid_lkup_tbl []; |
| void BTA_GetEirService( uint8_t *p_eir, tBTA_SERVICE_MASK *p_services ) |
| { |
| uint8_t xx, yy; |
| uint8_t num_uuid, max_num_uuid = 32; |
| uint8_t uuid_list[32*LEN_UUID_16]; |
| uint16_t *p_uuid16 = (uint16_t *)uuid_list; |
| tBTA_SERVICE_MASK mask; |
| |
| BTM_GetEirUuidList( p_eir, LEN_UUID_16, &num_uuid, uuid_list, max_num_uuid); |
| for( xx = 0; xx < num_uuid; xx++ ) |
| { |
| mask = 1; |
| for( yy = 0; yy < BTA_MAX_SERVICE_ID; yy++ ) |
| { |
| if( *(p_uuid16 + xx) == bta_service_id_to_uuid_lkup_tbl[yy] ) |
| { |
| *p_services |= mask; |
| break; |
| } |
| mask <<= 1; |
| } |
| |
| /* for HSP v1.2 only device */ |
| if (*(p_uuid16 + xx) == UUID_SERVCLASS_HEADSET_HS) |
| *p_services |= BTA_HSP_SERVICE_MASK; |
| |
| if (*(p_uuid16 + xx) == UUID_SERVCLASS_HDP_SOURCE) |
| *p_services |= BTA_HL_SERVICE_MASK; |
| |
| if (*(p_uuid16 + xx) == UUID_SERVCLASS_HDP_SINK) |
| *p_services |= BTA_HL_SERVICE_MASK; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmGetConnectionState |
| ** |
| ** Description Returns whether the remote device is currently connected. |
| ** |
| ** Returns 0 if the device is NOT connected. |
| ** |
| *******************************************************************************/ |
| uint16_t BTA_DmGetConnectionState(const BD_ADDR bd_addr ) |
| { |
| tBTA_DM_PEER_DEVICE * p_dev = bta_dm_find_peer_device(bd_addr); |
| return (p_dev && p_dev->conn_state == BTA_DM_CONNECTED); |
| } |
| |
| |
| /******************************************************************************* |
| ** Device Identification (DI) Server Functions |
| *******************************************************************************/ |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmSetLocalDiRecord |
| ** |
| ** Description This function adds a DI record to the local SDP database. |
| ** |
| ** Returns BTA_SUCCESS if record set sucessfully, otherwise error code. |
| ** |
| *******************************************************************************/ |
| tBTA_STATUS BTA_DmSetLocalDiRecord( tBTA_DI_RECORD *p_device_info, |
| uint32_t *p_handle ) |
| { |
| tBTA_STATUS status = BTA_FAILURE; |
| |
| if(bta_dm_di_cb.di_num < BTA_DI_NUM_MAX) |
| { |
| if(SDP_SetLocalDiRecord((tSDP_DI_RECORD *)p_device_info, p_handle) == SDP_SUCCESS) |
| { |
| if(!p_device_info->primary_record) |
| { |
| bta_dm_di_cb.di_handle[bta_dm_di_cb.di_num] = *p_handle; |
| bta_dm_di_cb.di_num ++; |
| } |
| |
| bta_sys_add_uuid(UUID_SERVCLASS_PNP_INFORMATION); |
| status = BTA_SUCCESS; |
| } |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dmexecutecallback |
| ** |
| ** Description This function will request BTA to execute a call back in the context of BTU task |
| ** This API was named in lower case because it is only intended |
| ** for the internal customers(like BTIF). |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_dmexecutecallback (tBTA_DM_EXEC_CBACK* p_callback, void * p_param) |
| { |
| tBTA_DM_API_EXECUTE_CBACK *p_msg = |
| (tBTA_DM_API_EXECUTE_CBACK *)osi_malloc(sizeof(tBTA_DM_MSG)); |
| |
| p_msg->hdr.event = BTA_DM_API_EXECUTE_CBACK_EVT; |
| p_msg->p_param= p_param; |
| p_msg->p_exec_cback= p_callback; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmAddBleKey |
| ** |
| ** Description Add/modify LE device information. This function will be |
| ** normally called during host startup to restore all required |
| ** information stored in the NVRAM. |
| ** |
| ** Parameters: bd_addr - BD address of the peer |
| ** p_le_key - LE key values. |
| ** key_type - LE SMP key type. |
| ** |
| ** Returns BTA_SUCCESS if successful |
| ** BTA_FAIL if operation failed. |
| ** |
| *******************************************************************************/ |
| void BTA_DmAddBleKey (BD_ADDR bd_addr, tBTA_LE_KEY_VALUE *p_le_key, tBTA_LE_KEY_TYPE key_type) |
| { |
| #if (BLE_INCLUDED == TRUE) |
| |
| tBTA_DM_API_ADD_BLEKEY *p_msg = |
| (tBTA_DM_API_ADD_BLEKEY *)osi_calloc(sizeof(tBTA_DM_API_ADD_BLEKEY)); |
| |
| p_msg->hdr.event = BTA_DM_API_ADD_BLEKEY_EVT; |
| p_msg->key_type = key_type; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| memcpy(&p_msg->blekey, p_le_key, sizeof(tBTA_LE_KEY_VALUE)); |
| |
| bta_sys_sendmsg(p_msg); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmAddBleDevice |
| ** |
| ** Description Add a BLE device. This function will be normally called |
| ** during host startup to restore all required information |
| ** for a LE device stored in the NVRAM. |
| ** |
| ** Parameters: bd_addr - BD address of the peer |
| ** dev_type - Remote device's device type. |
| ** addr_type - LE device address type. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type, tBT_DEVICE_TYPE dev_type) |
| { |
| #if (BLE_INCLUDED == TRUE) |
| tBTA_DM_API_ADD_BLE_DEVICE *p_msg = |
| (tBTA_DM_API_ADD_BLE_DEVICE *)osi_calloc(sizeof(tBTA_DM_API_ADD_BLE_DEVICE)); |
| |
| p_msg->hdr.event = BTA_DM_API_ADD_BLEDEVICE_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->addr_type = addr_type; |
| p_msg->dev_type = dev_type; |
| |
| bta_sys_sendmsg(p_msg); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBlePasskeyReply |
| ** |
| ** Description Send BLE SMP passkey reply. |
| ** |
| ** Parameters: bd_addr - BD address of the peer |
| ** accept - passkey entry sucessful or declined. |
| ** passkey - passkey value, must be a 6 digit number, |
| ** can be lead by 0. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmBlePasskeyReply(BD_ADDR bd_addr, bool accept, uint32_t passkey) |
| { |
| #if (BLE_INCLUDED == TRUE) |
| tBTA_DM_API_PASSKEY_REPLY *p_msg = |
| (tBTA_DM_API_PASSKEY_REPLY *)osi_calloc(sizeof(tBTA_DM_API_PASSKEY_REPLY)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_PASSKEY_REPLY_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->accept = accept; |
| |
| if (accept) |
| p_msg->passkey = passkey; |
| |
| bta_sys_sendmsg(p_msg); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleConfirmReply |
| ** |
| ** Description Send BLE SMP SC user confirmation reply. |
| ** |
| ** Parameters: bd_addr - BD address of the peer |
| ** accept - numbers to compare are the same or different. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmBleConfirmReply(BD_ADDR bd_addr, bool accept) |
| { |
| #if (BLE_INCLUDED == TRUE) |
| tBTA_DM_API_CONFIRM *p_msg = |
| (tBTA_DM_API_CONFIRM *)osi_calloc(sizeof(tBTA_DM_API_CONFIRM)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_CONFIRM_REPLY_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->accept = accept; |
| |
| bta_sys_sendmsg(p_msg); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleSecurityGrant |
| ** |
| ** Description Grant security request access. |
| ** |
| ** Parameters: bd_addr - BD address of the peer |
| ** res - security grant status. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmBleSecurityGrant(BD_ADDR bd_addr, tBTA_DM_BLE_SEC_GRANT res) |
| { |
| #if (BLE_INCLUDED == TRUE) |
| tBTA_DM_API_BLE_SEC_GRANT *p_msg = |
| (tBTA_DM_API_BLE_SEC_GRANT *)osi_calloc(sizeof(tBTA_DM_API_BLE_SEC_GRANT)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_SEC_GRANT_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->res = res; |
| |
| bta_sys_sendmsg(p_msg); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmSetBlePrefConnParams |
| ** |
| ** Description This function is called to set the preferred connection |
| ** parameters when default connection parameter is not desired. |
| ** |
| ** Parameters: bd_addr - BD address of the peripheral |
| ** scan_interval - scan interval |
| ** scan_window - scan window |
| ** min_conn_int - minimum preferred connection interval |
| ** max_conn_int - maximum preferred connection interval |
| ** slave_latency - preferred slave latency |
| ** supervision_tout - preferred supervision timeout |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmSetBlePrefConnParams(const BD_ADDR bd_addr, |
| uint16_t min_conn_int, uint16_t max_conn_int, |
| uint16_t slave_latency, uint16_t supervision_tout ) |
| { |
| #if (BLE_INCLUDED == TRUE) |
| tBTA_DM_API_BLE_CONN_PARAMS *p_msg = |
| (tBTA_DM_API_BLE_CONN_PARAMS *)osi_calloc(sizeof(tBTA_DM_API_BLE_CONN_PARAMS)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_CONN_PARAM_EVT; |
| memcpy(p_msg->peer_bda, bd_addr, BD_ADDR_LEN); |
| p_msg->conn_int_max = max_conn_int; |
| p_msg->conn_int_min = min_conn_int; |
| p_msg->slave_latency = slave_latency; |
| p_msg->supervision_tout = supervision_tout; |
| |
| bta_sys_sendmsg(p_msg); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmSetBleConnScanParams |
| ** |
| ** Description This function is called to set scan parameters used in |
| ** BLE connection request |
| ** |
| ** Parameters: scan_interval - scan interval |
| ** scan_window - scan window |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmSetBleConnScanParams(uint32_t scan_interval, uint32_t scan_window) |
| { |
| #if (BLE_INCLUDED == TRUE) |
| tBTA_DM_API_BLE_SCAN_PARAMS *p_msg = |
| (tBTA_DM_API_BLE_SCAN_PARAMS *)osi_calloc(sizeof(tBTA_DM_API_BLE_SCAN_PARAMS)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_CONN_SCAN_PARAM_EVT; |
| p_msg->scan_int = scan_interval; |
| p_msg->scan_window = scan_window; |
| |
| bta_sys_sendmsg(p_msg); |
| #endif // BLE_INCLUDED == true |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmSetBleScanParams |
| ** |
| ** Description This function is called to set scan parameters |
| ** |
| ** Parameters: client_if - Client IF |
| ** scan_interval - scan interval |
| ** scan_window - scan window |
| ** scan_mode - scan mode |
| ** scan_param_setup_status_cback - Set scan param status callback |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| |
| #if (BLE_INCLUDED == TRUE) |
| void BTA_DmSetBleScanParams(tGATT_IF client_if, uint32_t scan_interval, |
| uint32_t scan_window, tBLE_SCAN_MODE scan_mode, |
| tBLE_SCAN_PARAM_SETUP_CBACK scan_param_setup_cback) |
| { |
| tBTA_DM_API_BLE_SCAN_PARAMS *p_msg = |
| (tBTA_DM_API_BLE_SCAN_PARAMS *)osi_calloc(sizeof(tBTA_DM_API_BLE_SCAN_PARAMS)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_SCAN_PARAM_EVT; |
| p_msg->client_if = client_if; |
| p_msg->scan_int = scan_interval; |
| p_msg->scan_window = scan_window; |
| p_msg->scan_mode = scan_mode; |
| p_msg->scan_param_setup_cback = scan_param_setup_cback; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| #endif // BLE_INCLUDED == true |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmSetBleAdvParams |
| ** |
| ** Description This function sets the advertising parameters BLE functionality. |
| ** It is to be called when device act in peripheral or broadcaster |
| ** role. |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmSetBleAdvParams (uint16_t adv_int_min, uint16_t adv_int_max, |
| tBLE_BD_ADDR *p_dir_bda) |
| { |
| #if (BLE_INCLUDED == TRUE) |
| tBTA_DM_API_BLE_ADV_PARAMS *p_msg = |
| (tBTA_DM_API_BLE_ADV_PARAMS *)osi_calloc(sizeof(tBTA_DM_API_BLE_ADV_PARAMS)); |
| |
| APPL_TRACE_API("BTA_DmSetBleAdvParam: %d, %d", adv_int_min, adv_int_max); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_ADV_PARAM_EVT; |
| p_msg->adv_int_min = adv_int_min; |
| p_msg->adv_int_max = adv_int_max; |
| |
| if (p_dir_bda != NULL) { |
| p_msg->p_dir_bda = (tBLE_BD_ADDR *)(p_msg + 1); |
| memcpy(p_msg->p_dir_bda, p_dir_bda, sizeof(tBLE_BD_ADDR)); |
| } |
| |
| bta_sys_sendmsg(p_msg); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** BLE ADV data management API |
| ********************************************************************************/ |
| |
| #if (BLE_INCLUDED == TRUE) |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleSetAdvConfig |
| ** |
| ** Description This function is called to override the BTA default ADV parameters. |
| ** |
| ** Parameters data_mask: adv data mask. |
| ** p_adv_cfg: Pointer to User defined ADV data structure. This |
| ** memory space can not be freed until p_adv_data_cback |
| ** is received. |
| ** p_adv_data_cback: set adv data complete callback. |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void BTA_DmBleSetAdvConfig (tBTA_BLE_AD_MASK data_mask, tBTA_BLE_ADV_DATA *p_adv_cfg, |
| tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback) |
| { |
| tBTA_DM_API_SET_ADV_CONFIG *p_msg = (tBTA_DM_API_SET_ADV_CONFIG*) osi_calloc(sizeof(*p_msg)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_SET_ADV_CONFIG_EVT; |
| p_msg->data_mask = data_mask; |
| p_msg->p_adv_data_cback = p_adv_data_cback; |
| memcpy(&p_msg->adv_cfg, p_adv_cfg, sizeof(p_msg->adv_cfg)); |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleSetScanRsp |
| ** |
| ** Description This function is called to override the BTA scan response. |
| ** |
| ** Parameters Pointer to User defined ADV data structure |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| extern void BTA_DmBleSetScanRsp (tBTA_BLE_AD_MASK data_mask, tBTA_BLE_ADV_DATA *p_adv_cfg, |
| tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback) |
| { |
| tBTA_DM_API_SET_ADV_CONFIG *p_msg = (tBTA_DM_API_SET_ADV_CONFIG*) osi_calloc(sizeof(*p_msg)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_SET_SCAN_RSP_EVT; |
| p_msg->data_mask = data_mask; |
| p_msg->p_adv_data_cback = p_adv_data_cback; |
| memcpy(&p_msg->adv_cfg, p_adv_cfg, sizeof(p_msg->adv_cfg)); |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleSetStorageParams |
| ** |
| ** Description This function is called to override the BTA scan response. |
| ** |
| ** Parameters batch_scan_full_max -Max storage space (in %) allocated to full scanning |
| ** batch_scan_trunc_max -Max storage space (in %) allocated to truncated scanning |
| ** batch_scan_notify_threshold -Setup notification level based on total space |
| ** p_setup_cback - Setup callback pointer |
| ** p_thres_cback - Threshold callback pointer |
| ** p_rep_cback - Reports callback pointer |
| ** ref_value - Ref value |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| extern void BTA_DmBleSetStorageParams(uint8_t batch_scan_full_max, |
| uint8_t batch_scan_trunc_max, |
| uint8_t batch_scan_notify_threshold, |
| tBTA_BLE_SCAN_SETUP_CBACK *p_setup_cback, |
| tBTA_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback, |
| tBTA_BLE_SCAN_REP_CBACK* p_rep_cback, |
| tBTA_DM_BLE_REF_VALUE ref_value) |
| { |
| tBTA_DM_API_SET_STORAGE_CONFIG *p_msg = |
| (tBTA_DM_API_SET_STORAGE_CONFIG *)osi_malloc(sizeof(tBTA_DM_API_SET_STORAGE_CONFIG)); |
| |
| bta_dm_cb.p_setup_cback = p_setup_cback; |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_SETUP_STORAGE_EVT; |
| p_msg->p_setup_cback=bta_ble_scan_setup_cb; |
| p_msg->p_thres_cback=p_thres_cback; |
| p_msg->p_read_rep_cback=p_rep_cback; |
| p_msg->ref_value = ref_value; |
| p_msg->batch_scan_full_max = batch_scan_full_max; |
| p_msg->batch_scan_trunc_max = batch_scan_trunc_max; |
| p_msg->batch_scan_notify_threshold = batch_scan_notify_threshold; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleEnableBatchScan |
| ** |
| ** Description This function is called to enable the batch scan |
| ** |
| ** Parameters scan_mode -Batch scan mode |
| ** scan_interval - Scan interval |
| ** scan_window - Scan window |
| ** discard_rule -Discard rules |
| ** addr_type - Address type |
| ** ref_value - Reference value |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| extern void BTA_DmBleEnableBatchScan(tBTA_BLE_BATCH_SCAN_MODE scan_mode, |
| uint32_t scan_interval, uint32_t scan_window, |
| tBTA_BLE_DISCARD_RULE discard_rule, |
| tBLE_ADDR_TYPE addr_type, |
| tBTA_DM_BLE_REF_VALUE ref_value) |
| { |
| tBTA_DM_API_ENABLE_SCAN *p_msg = |
| (tBTA_DM_API_ENABLE_SCAN *)osi_malloc(sizeof(tBTA_DM_API_ENABLE_SCAN)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_ENABLE_BATCH_SCAN_EVT; |
| p_msg->scan_mode = scan_mode; |
| p_msg->scan_int = scan_interval; |
| p_msg->scan_window = scan_window; |
| p_msg->discard_rule = discard_rule; |
| p_msg->addr_type = addr_type; |
| p_msg->ref_value = ref_value; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleDisableBatchScan |
| ** |
| ** Description This function is called to disable the batch scan |
| ** |
| ** Parameters ref_value - Reference value |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| extern void BTA_DmBleDisableBatchScan(tBTA_DM_BLE_REF_VALUE ref_value) |
| { |
| tBTA_DM_API_DISABLE_SCAN *p_msg = |
| (tBTA_DM_API_DISABLE_SCAN *)osi_malloc(sizeof(tBTA_DM_API_DISABLE_SCAN)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_DISABLE_BATCH_SCAN_EVT; |
| p_msg->ref_value = ref_value; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleReadScanReports |
| ** |
| ** Description This function is called to read scan reports |
| ** |
| ** Parameters scan_type -Batch scan mode |
| ** ref_value - Reference value |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| extern void BTA_DmBleReadScanReports(tBTA_BLE_BATCH_SCAN_MODE scan_type, |
| tBTA_DM_BLE_REF_VALUE ref_value) |
| { |
| tBTA_DM_API_READ_SCAN_REPORTS *p_msg = |
| (tBTA_DM_API_READ_SCAN_REPORTS *)osi_malloc(sizeof(tBTA_DM_API_READ_SCAN_REPORTS)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_READ_SCAN_REPORTS_EVT; |
| p_msg->scan_type = scan_type; |
| p_msg->ref_value = ref_value; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleTrackAdvertiser |
| ** |
| ** Description This function is called to track advertiser |
| ** |
| ** Parameters ref_value - Reference value |
| ** p_track_adv_cback - Track ADV callback |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| extern void BTA_DmBleTrackAdvertiser(tBTA_DM_BLE_REF_VALUE ref_value, |
| tBTA_BLE_TRACK_ADV_CBACK *p_track_adv_cback) |
| { |
| tBTA_DM_API_TRACK_ADVERTISER *p_msg = |
| (tBTA_DM_API_TRACK_ADVERTISER *)osi_malloc(sizeof(tBTA_DM_API_TRACK_ADVERTISER)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_TRACK_ADVERTISER_EVT; |
| p_msg->p_track_adv_cback = p_track_adv_cback; |
| p_msg->ref_value = ref_value; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| #endif |
| |
| /******************************************************************************* |
| ** BLE ADV data management API |
| ********************************************************************************/ |
| #if (BLE_INCLUDED == TRUE) |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleBroadcast |
| ** |
| ** Description This function starts or stops LE broadcasting. |
| ** |
| ** Parameters start: start or stop broadcast. |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| extern void BTA_DmBleBroadcast (bool start) |
| { |
| tBTA_DM_API_BLE_OBSERVE *p_msg = |
| (tBTA_DM_API_BLE_OBSERVE *)osi_calloc(sizeof(tBTA_DM_API_BLE_OBSERVE)); |
| |
| APPL_TRACE_API("BTA_DmBleBroadcast: start = %d ", start); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_BROADCAST_EVT; |
| p_msg->start = start; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| #endif |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleSetBgConnType |
| ** |
| ** Description This function is called to set BLE connectable mode for a |
| ** peripheral device. |
| ** |
| ** Parameters bg_conn_type: it can be auto connection, or selective connection. |
| ** p_select_cback: callback function when selective connection procedure |
| ** is being used. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmBleSetBgConnType(tBTA_DM_BLE_CONN_TYPE bg_conn_type, tBTA_DM_BLE_SEL_CBACK *p_select_cback) |
| { |
| #if (BLE_INCLUDED == TRUE) |
| tBTA_DM_API_BLE_SET_BG_CONN_TYPE *p_msg = |
| (tBTA_DM_API_BLE_SET_BG_CONN_TYPE *)osi_calloc(sizeof(tBTA_DM_API_BLE_SET_BG_CONN_TYPE)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_SET_BG_CONN_TYPE; |
| p_msg->bg_conn_type = bg_conn_type; |
| p_msg->p_select_cback = p_select_cback; |
| |
| bta_sys_sendmsg(p_msg); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_dm_discover_send_msg |
| ** |
| ** Description This function send discover message to BTA task. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| #if (BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE) |
| static void bta_dm_discover_send_msg(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services, |
| tBTA_DM_SEARCH_CBACK *p_cback, bool sdp_search, |
| tBTA_TRANSPORT transport) |
| { |
| const size_t len = p_services ? |
| (sizeof(tBTA_DM_API_DISCOVER) + sizeof(tBT_UUID) * p_services->num_uuid) |
| : sizeof(tBTA_DM_API_DISCOVER); |
| tBTA_DM_API_DISCOVER *p_msg = (tBTA_DM_API_DISCOVER *)osi_calloc(len); |
| |
| p_msg->hdr.event = BTA_DM_API_DISCOVER_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->p_cback = p_cback; |
| p_msg->sdp_search = sdp_search; |
| p_msg->transport = transport; |
| |
| if (p_services != NULL) { |
| #if (BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE) |
| p_msg->services = p_services->srvc_mask; |
| p_msg->num_uuid = p_services->num_uuid; |
| if (p_services->num_uuid != 0) { |
| p_msg->p_uuid = (tBT_UUID *)(p_msg + 1); |
| memcpy(p_msg->p_uuid, p_services->p_uuid, |
| sizeof(tBT_UUID) * p_services->num_uuid); |
| } |
| #endif |
| } |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| #endif |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmDiscoverByTransport |
| ** |
| ** Description This function does service discovery on particular transport |
| ** for services of a |
| ** peer device. When services.num_uuid is 0, it indicates all |
| ** GATT based services are to be searched; otherwise a list of |
| ** UUID of interested services should be provided through |
| ** p_services->p_uuid. |
| ** |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmDiscoverByTransport(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services, |
| tBTA_DM_SEARCH_CBACK *p_cback, bool sdp_search, |
| tBTA_TRANSPORT transport) |
| { |
| #if (BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE) |
| bta_dm_discover_send_msg(bd_addr, p_services, p_cback, sdp_search, transport); |
| #endif |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmDiscoverExt |
| ** |
| ** Description This function does service discovery for services of a |
| ** peer device. When services.num_uuid is 0, it indicates all |
| ** GATT based services are to be searched; other wise a list of |
| ** UUID of interested services should be provided through |
| ** p_services->p_uuid. |
| ** |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmDiscoverExt(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services, |
| tBTA_DM_SEARCH_CBACK *p_cback, bool sdp_search) |
| { |
| #if (BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE) |
| bta_dm_discover_send_msg(bd_addr, p_services, p_cback, sdp_search, BTA_TRANSPORT_UNKNOWN); |
| #endif |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmSearchExt |
| ** |
| ** Description This function searches for peer Bluetooth devices. It performs |
| ** an inquiry and gets the remote name for devices. Service |
| ** discovery is done if services is non zero |
| ** |
| ** Parameters p_dm_inq: inquiry conditions |
| ** p_services: if service is not empty, service discovery will be done. |
| ** for all GATT based service condition, put num_uuid, and |
| ** p_uuid is the pointer to the list of UUID values. |
| ** p_cback: callback functino when search is completed. |
| ** |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmSearchExt(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK_EXT *p_services, tBTA_DM_SEARCH_CBACK *p_cback) |
| { |
| #if (BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE) |
| const size_t len = p_services ? |
| (sizeof(tBTA_DM_API_SEARCH) + sizeof(tBT_UUID) * p_services->num_uuid) |
| : sizeof(tBTA_DM_API_SEARCH); |
| tBTA_DM_API_SEARCH *p_msg = (tBTA_DM_API_SEARCH *)osi_calloc(len); |
| |
| p_msg->hdr.event = BTA_DM_API_SEARCH_EVT; |
| memcpy(&p_msg->inq_params, p_dm_inq, sizeof(tBTA_DM_INQ)); |
| p_msg->p_cback = p_cback; |
| p_msg->rs_res = BTA_DM_RS_NONE; |
| |
| if (p_services != NULL) { |
| p_msg->services = p_services->srvc_mask; |
| p_msg->num_uuid = p_services->num_uuid; |
| |
| if (p_services->num_uuid != 0) { |
| p_msg->p_uuid = (tBT_UUID *)(p_msg + 1); |
| memcpy(p_msg->p_uuid, p_services->p_uuid, |
| sizeof(tBT_UUID) * p_services->num_uuid); |
| } else { |
| p_msg->p_uuid = NULL; |
| } |
| } |
| |
| bta_sys_sendmsg(p_msg); |
| #else |
| UNUSED(p_dm_inq); |
| UNUSED(p_services); |
| UNUSED(p_cback); |
| #endif |
| } |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleUpdateConnectionParam |
| ** |
| ** Description Update connection parameters, can only be used when connection is up. |
| ** |
| ** Parameters: bd_addr - BD address of the peer |
| ** min_int - minimum connection interval, [0x0004~ 0x4000] |
| ** max_int - maximum connection interval, [0x0004~ 0x4000] |
| ** latency - slave latency [0 ~ 500] |
| ** timeout - supervision timeout [0x000a ~ 0xc80] |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmBleUpdateConnectionParam(BD_ADDR bd_addr, uint16_t min_int, |
| uint16_t max_int, uint16_t latency, |
| uint16_t timeout) |
| { |
| #if (BLE_INCLUDED == TRUE) |
| tBTA_DM_API_UPDATE_CONN_PARAM *p_msg = |
| (tBTA_DM_API_UPDATE_CONN_PARAM *)osi_calloc(sizeof(tBTA_DM_API_UPDATE_CONN_PARAM)); |
| |
| p_msg->hdr.event = BTA_DM_API_UPDATE_CONN_PARAM_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->min_int = min_int; |
| p_msg->max_int = max_int; |
| p_msg->latency = latency; |
| p_msg->timeout = timeout; |
| |
| bta_sys_sendmsg(p_msg); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleConfigLocalPrivacy |
| ** |
| ** Description Enable/disable privacy on the local device |
| ** |
| ** Parameters: privacy_enable - enable/disabe privacy on remote device. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmBleConfigLocalPrivacy(bool privacy_enable) |
| { |
| #if (BLE_INCLUDED == TRUE && BLE_PRIVACY_SPT == TRUE) |
| tBTA_DM_API_LOCAL_PRIVACY *p_msg = |
| (tBTA_DM_API_LOCAL_PRIVACY *)osi_calloc(sizeof(tBTA_DM_API_ENABLE_PRIVACY)); |
| |
| p_msg->hdr.event = BTA_DM_API_LOCAL_PRIVACY_EVT; |
| p_msg->privacy_enable = privacy_enable; |
| |
| bta_sys_sendmsg(p_msg); |
| #else |
| UNUSED (privacy_enable); |
| #endif |
| } |
| |
| #if (BLE_INCLUDED == TRUE) |
| /******************************************************************************* |
| ** |
| ** Function BTA_BleEnableAdvInstance |
| ** |
| ** Description This function enable a Multi-ADV instance with the specififed |
| ** adv parameters |
| ** |
| ** Parameters p_params: pointer to the adv parameter structure. |
| ** p_cback: callback function associated to this adv instance. |
| ** p_ref: reference data pointer to this adv instance. |
| ** |
| ** Returns BTA_SUCCESS if command started sucessfully; otherwise failure. |
| ** |
| *******************************************************************************/ |
| void BTA_BleEnableAdvInstance (tBTA_BLE_ADV_PARAMS *p_params, |
| tBTA_BLE_MULTI_ADV_CBACK *p_cback, |
| void *p_ref) |
| { |
| const size_t len = sizeof(tBTA_BLE_ADV_PARAMS) + |
| sizeof(tBTA_DM_API_BLE_MULTI_ADV_ENB); |
| tBTA_DM_API_BLE_MULTI_ADV_ENB *p_msg = |
| (tBTA_DM_API_BLE_MULTI_ADV_ENB *)osi_calloc(len); |
| |
| APPL_TRACE_API("%s", __func__); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_MULTI_ADV_ENB_EVT; |
| p_msg->p_cback = (tBTA_BLE_MULTI_ADV_CBACK *)p_cback; |
| if (p_params != NULL) { |
| p_msg->p_params = (tBTA_BLE_ADV_PARAMS *)(p_msg + 1); |
| memcpy(p_msg->p_params, p_params, sizeof(tBTA_BLE_ADV_PARAMS)); |
| } |
| p_msg->p_ref = p_ref; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_BleUpdateAdvInstParam |
| ** |
| ** Description This function update a Multi-ADV instance with the specififed |
| ** adv parameters. |
| ** |
| ** Parameters inst_id: Adv instance to update the parameter. |
| ** p_params: pointer to the adv parameter structure. |
| ** |
| ** Returns BTA_SUCCESS if command started sucessfully; otherwise failure. |
| ** |
| *******************************************************************************/ |
| void BTA_BleUpdateAdvInstParam (uint8_t inst_id, tBTA_BLE_ADV_PARAMS *p_params) |
| { |
| const size_t len = sizeof(tBTA_BLE_ADV_PARAMS) + |
| sizeof(tBTA_DM_API_BLE_MULTI_ADV_PARAM); |
| tBTA_DM_API_BLE_MULTI_ADV_PARAM *p_msg = |
| (tBTA_DM_API_BLE_MULTI_ADV_PARAM *)osi_calloc(len); |
| |
| APPL_TRACE_API("%s", __func__); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_MULTI_ADV_PARAM_UPD_EVT; |
| p_msg->inst_id = inst_id; |
| p_msg->p_params = (tBTA_BLE_ADV_PARAMS *)(p_msg + 1); |
| memcpy(p_msg->p_params, p_params, sizeof(tBTA_BLE_ADV_PARAMS)); |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_BleCfgAdvInstData |
| ** |
| ** Description This function configure a Multi-ADV instance with the specififed |
| ** adv data or scan response data. |
| ** |
| ** Parameter inst_id: Adv instance to configure the adv data or scan response. |
| ** is_scan_rsp: is the data scan response or adv data. |
| ** data_mask: adv data type as bit mask. |
| ** p_data: pointer to the ADV data structure tBTA_BLE_ADV_DATA. This |
| ** memory space can not be freed until BTA_BLE_MULTI_ADV_DATA_EVT |
| ** is sent to application. |
| ** |
| ** Returns BTA_SUCCESS if command started sucessfully; otherwise failure. |
| ** |
| *******************************************************************************/ |
| void BTA_BleCfgAdvInstData (uint8_t inst_id, bool is_scan_rsp, |
| tBTA_BLE_AD_MASK data_mask, |
| tBTA_BLE_ADV_DATA *p_data) |
| { |
| tBTA_DM_API_BLE_MULTI_ADV_DATA *p_msg = |
| (tBTA_DM_API_BLE_MULTI_ADV_DATA*) osi_calloc(sizeof(*p_msg)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_MULTI_ADV_DATA_EVT; |
| p_msg->inst_id = inst_id; |
| p_msg->is_scan_rsp = is_scan_rsp; |
| p_msg->data_mask = data_mask; |
| memcpy(&p_msg->data, p_data, sizeof(p_msg->data)); |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_BleDisableAdvInstance |
| ** |
| ** Description This function disable a Multi-ADV instance. |
| ** |
| ** Parameter inst_id: instance ID to disable. |
| ** |
| ** Returns BTA_SUCCESS if command started sucessfully; otherwise failure. |
| ** |
| *******************************************************************************/ |
| void BTA_BleDisableAdvInstance(uint8_t inst_id) |
| { |
| tBTA_DM_API_BLE_MULTI_ADV_DISABLE *p_msg = |
| (tBTA_DM_API_BLE_MULTI_ADV_DISABLE *)osi_calloc(sizeof(tBTA_DM_API_BLE_MULTI_ADV_DISABLE)); |
| |
| APPL_TRACE_API("%s: %d", __func__, inst_id); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_MULTI_ADV_DISABLE_EVT; |
| p_msg->inst_id = inst_id; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleCfgFilterCondition |
| ** |
| ** Description This function is called to configure the adv data payload filter |
| ** condition. |
| ** |
| ** Parameters action: to read/write/clear |
| ** cond_type: filter condition type |
| ** filt_index - Filter index |
| ** p_cond: filter condition parameter |
| ** p_cmpl_back - Command completed callback |
| ** ref_value - Reference value |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmBleCfgFilterCondition(tBTA_DM_BLE_SCAN_COND_OP action, |
| tBTA_DM_BLE_PF_COND_TYPE cond_type, |
| tBTA_DM_BLE_PF_FILT_INDEX filt_index, |
| tBTA_DM_BLE_PF_COND_PARAM *p_cond, |
| tBTA_DM_BLE_PF_CFG_CBACK *p_cmpl_cback, |
| tBTA_DM_BLE_REF_VALUE ref_value) |
| { |
| #if (BLE_ANDROID_CONTROLLER_SCAN_FILTER == TRUE) |
| tBTA_DM_API_CFG_FILTER_COND *p_msg; |
| APPL_TRACE_API ("BTA_DmBleCfgFilterCondition: %d, %d", action, cond_type); |
| |
| uint16_t len = sizeof(tBTA_DM_API_CFG_FILTER_COND) + |
| sizeof(tBTA_DM_BLE_PF_COND_PARAM); |
| uint8_t *p; |
| |
| if (NULL != p_cond) |
| { |
| switch(cond_type) |
| { |
| case BTA_DM_BLE_PF_SRVC_DATA_PATTERN: |
| case BTA_DM_BLE_PF_MANU_DATA: |
| /* Length of pattern and pattern mask and other elements in */ |
| /* tBTA_DM_BLE_PF_MANU_COND */ |
| len += ((p_cond->manu_data.data_len) * 2) + |
| sizeof(uint16_t) + sizeof(uint16_t) + sizeof(uint8_t); |
| break; |
| |
| case BTA_DM_BLE_PF_LOCAL_NAME: |
| len += ((p_cond->local_name.data_len) + sizeof(uint8_t)); |
| break; |
| |
| case BTM_BLE_PF_SRVC_UUID: |
| case BTM_BLE_PF_SRVC_SOL_UUID: |
| len += sizeof(tBLE_BD_ADDR) + sizeof(tBTA_DM_BLE_PF_COND_MASK); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| p_msg = (tBTA_DM_API_CFG_FILTER_COND *)osi_calloc(len); |
| p_msg->hdr.event = BTA_DM_API_CFG_FILTER_COND_EVT; |
| p_msg->action = action; |
| p_msg->cond_type = cond_type; |
| p_msg->filt_index = filt_index; |
| p_msg->p_filt_cfg_cback = p_cmpl_cback; |
| p_msg->ref_value = ref_value; |
| if (p_cond) { |
| p_msg->p_cond_param = (tBTA_DM_BLE_PF_COND_PARAM *)(p_msg + 1); |
| memcpy(p_msg->p_cond_param, p_cond, sizeof(tBTA_DM_BLE_PF_COND_PARAM)); |
| |
| p = (uint8_t *)(p_msg->p_cond_param + 1); |
| |
| if (cond_type == BTA_DM_BLE_PF_SRVC_DATA_PATTERN || |
| cond_type == BTA_DM_BLE_PF_MANU_DATA) { |
| p_msg->p_cond_param->manu_data.p_pattern = p; |
| p_msg->p_cond_param->manu_data.data_len = p_cond->manu_data.data_len; |
| memcpy(p_msg->p_cond_param->manu_data.p_pattern, p_cond->manu_data.p_pattern, |
| p_cond->manu_data.data_len); |
| p += p_cond->manu_data.data_len; |
| |
| if (cond_type == BTA_DM_BLE_PF_MANU_DATA) { |
| p_msg->p_cond_param->manu_data.company_id_mask = |
| p_cond->manu_data.company_id_mask; |
| if ( p_cond->manu_data.p_pattern_mask != NULL) { |
| p_msg->p_cond_param->manu_data.p_pattern_mask = p; |
| memcpy(p_msg->p_cond_param->manu_data.p_pattern_mask, |
| p_cond->manu_data.p_pattern_mask, |
| p_cond->manu_data.data_len); |
| } |
| } |
| } else if (cond_type == BTA_DM_BLE_PF_LOCAL_NAME) { |
| p_msg->p_cond_param->local_name.p_data = p; |
| p_msg->p_cond_param->local_name.data_len = |
| p_cond->local_name.data_len; |
| memcpy(p_msg->p_cond_param->local_name.p_data, |
| p_cond->local_name.p_data, p_cond->local_name.data_len); |
| } else if (cond_type == BTM_BLE_PF_SRVC_UUID || |
| cond_type == BTM_BLE_PF_SRVC_SOL_UUID) { |
| if (p_cond->srvc_uuid.p_target_addr != NULL) { |
| p_msg->p_cond_param->srvc_uuid.p_target_addr = (tBLE_BD_ADDR *)(p); |
| p_msg->p_cond_param->srvc_uuid.p_target_addr->type = |
| p_cond->srvc_uuid.p_target_addr->type; |
| memcpy(p_msg->p_cond_param->srvc_uuid.p_target_addr->bda, |
| p_cond->srvc_uuid.p_target_addr->bda, BD_ADDR_LEN); |
| p = (uint8_t *)(p_msg->p_cond_param->srvc_uuid.p_target_addr + 1); |
| } |
| if (p_cond->srvc_uuid.p_uuid_mask) { |
| p_msg->p_cond_param->srvc_uuid.p_uuid_mask = (tBTA_DM_BLE_PF_COND_MASK *)p; |
| memcpy(p_msg->p_cond_param->srvc_uuid.p_uuid_mask, |
| p_cond->srvc_uuid.p_uuid_mask, |
| sizeof(tBTA_DM_BLE_PF_COND_MASK)); |
| } |
| } |
| } |
| |
| bta_sys_sendmsg(p_msg); |
| |
| #else |
| UNUSED(action); |
| UNUSED(cond_type); |
| UNUSED(filt_index); |
| UNUSED(p_cond); |
| UNUSED(p_cmpl_cback); |
| UNUSED(ref_value); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleScanFilterSetup |
| ** |
| ** Description This function is called to setup the adv data payload filter param |
| ** |
| ** Parameters p_target: enable the filter condition on a target device; if NULL |
| ** filt_index - Filter index |
| ** p_filt_params -Filter parameters |
| ** ref_value - Reference value |
| ** action - Add, delete or clear |
| ** p_cmpl_back - Command completed callback |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmBleScanFilterSetup(uint8_t action, |
| tBTA_DM_BLE_PF_FILT_INDEX filt_index, |
| tBTA_DM_BLE_PF_FILT_PARAMS *p_filt_params, |
| tBLE_BD_ADDR *p_target, |
| tBTA_DM_BLE_PF_PARAM_CBACK *p_cmpl_cback, |
| tBTA_DM_BLE_REF_VALUE ref_value) |
| { |
| #if (BLE_ANDROID_CONTROLLER_SCAN_FILTER == TRUE) |
| const size_t len = sizeof(tBTA_DM_API_SCAN_FILTER_PARAM_SETUP) + |
| sizeof(tBLE_BD_ADDR); |
| tBTA_DM_API_SCAN_FILTER_PARAM_SETUP *p_msg = |
| (tBTA_DM_API_SCAN_FILTER_PARAM_SETUP *)osi_calloc(len); |
| |
| APPL_TRACE_API("%s: %d", __func__, action); |
| |
| p_msg->hdr.event = BTA_DM_API_SCAN_FILTER_SETUP_EVT; |
| p_msg->action = action; |
| p_msg->filt_index = filt_index; |
| if (p_filt_params) { |
| memcpy(&p_msg->filt_params, p_filt_params, |
| sizeof(tBTA_DM_BLE_PF_FILT_PARAMS)); |
| } |
| p_msg->p_filt_param_cback = p_cmpl_cback; |
| p_msg->ref_value = ref_value; |
| |
| if (p_target) { |
| p_msg->p_target = (tBLE_BD_ADDR *)(p_msg + 1); |
| memcpy(p_msg->p_target, p_target, sizeof(tBLE_BD_ADDR)); |
| } |
| |
| bta_sys_sendmsg(p_msg); |
| |
| #else |
| UNUSED(action); |
| UNUSED(filt_index); |
| UNUSED(p_filt_params); |
| UNUSED(p_target); |
| UNUSED(p_cmpl_cback); |
| UNUSED(ref_value); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleGetEnergyInfo |
| ** |
| ** Description This function is called to obtain the energy info |
| ** |
| ** Parameters p_cmpl_cback - Command complete callback |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmBleGetEnergyInfo(tBTA_BLE_ENERGY_INFO_CBACK *p_cmpl_cback) |
| { |
| const size_t len = sizeof(tBTA_DM_API_ENERGY_INFO) + sizeof(tBLE_BD_ADDR); |
| tBTA_DM_API_ENERGY_INFO *p_msg = (tBTA_DM_API_ENERGY_INFO *)osi_calloc(len); |
| |
| APPL_TRACE_API("%s", __func__); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_ENERGY_INFO_EVT; |
| p_msg->p_energy_info_cback = p_cmpl_cback; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmEnableScanFilter |
| ** |
| ** Description This function is called to enable the adv data payload filter |
| ** |
| ** Parameters action - enable or disable the APCF feature |
| ** p_cmpl_cback - Command completed callback |
| ** ref_value - Reference value |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmEnableScanFilter(uint8_t action, tBTA_DM_BLE_PF_STATUS_CBACK *p_cmpl_cback, |
| tBTA_DM_BLE_REF_VALUE ref_value) |
| { |
| #if (BLE_ANDROID_CONTROLLER_SCAN_FILTER == TRUE) |
| const size_t len = sizeof(tBTA_DM_API_ENABLE_SCAN_FILTER) + |
| sizeof(tBLE_BD_ADDR); |
| tBTA_DM_API_ENABLE_SCAN_FILTER *p_msg = |
| (tBTA_DM_API_ENABLE_SCAN_FILTER *)osi_calloc(len); |
| |
| APPL_TRACE_API("%s: %d", __func__, action); |
| |
| p_msg->hdr.event = BTA_DM_API_SCAN_FILTER_ENABLE_EVT; |
| p_msg->action = action; |
| p_msg->ref_value = ref_value; |
| p_msg->p_filt_status_cback = p_cmpl_cback; |
| |
| bta_sys_sendmsg(p_msg); |
| |
| #else |
| UNUSED(action); |
| UNUSED(p_cmpl_cback); |
| UNUSED(ref_value); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleUpdateConnectionParams |
| ** |
| ** Description Update connection parameters, can only be used when connection is up. |
| ** |
| ** Parameters: bd_addr - BD address of the peer |
| ** min_int - minimum connection interval, [0x0004~ 0x4000] |
| ** max_int - maximum connection interval, [0x0004~ 0x4000] |
| ** latency - slave latency [0 ~ 500] |
| ** timeout - supervision timeout [0x000a ~ 0xc80] |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmBleUpdateConnectionParams(const BD_ADDR bd_addr, uint16_t min_int, uint16_t max_int, |
| uint16_t latency, uint16_t timeout) |
| { |
| tBTA_DM_API_UPDATE_CONN_PARAM *p_msg = |
| (tBTA_DM_API_UPDATE_CONN_PARAM *)osi_calloc(sizeof(tBTA_DM_API_UPDATE_CONN_PARAM)); |
| |
| p_msg->hdr.event = BTA_DM_API_UPDATE_CONN_PARAM_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->min_int = min_int; |
| p_msg->max_int = max_int; |
| p_msg->latency = latency; |
| p_msg->timeout = timeout; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleSetDataLength |
| ** |
| ** Description This function is to set maximum LE data packet size |
| ** |
| ** Returns void |
| ** |
| ** |
| *******************************************************************************/ |
| void BTA_DmBleSetDataLength(BD_ADDR remote_device, uint16_t tx_data_length) |
| { |
| tBTA_DM_API_BLE_SET_DATA_LENGTH *p_msg = |
| (tBTA_DM_API_BLE_SET_DATA_LENGTH *)osi_malloc(sizeof(tBTA_DM_API_BLE_SET_DATA_LENGTH)); |
| |
| bdcpy(p_msg->remote_bda, remote_device); |
| p_msg->hdr.event = BTA_DM_API_SET_DATA_LENGTH_EVT; |
| p_msg->tx_data_length = tx_data_length; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| #endif |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmSetEncryption |
| ** |
| ** Description This function is called to ensure that connection is |
| ** encrypted. Should be called only on an open connection. |
| ** Typically only needed for connections that first want to |
| ** bring up unencrypted links, then later encrypt them. |
| ** |
| ** Parameters: bd_addr - Address of the peer device |
| ** transport - transport of the link to be encruypted |
| ** p_callback - Pointer to callback function to indicat the |
| ** link encryption status |
| ** sec_act - This is the security action to indicate |
| ** what knid of BLE security level is required for |
| ** the BLE link if the BLE is supported |
| ** Note: This parameter is ignored for the BR/EDR link |
| ** or the BLE is not supported |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmSetEncryption(BD_ADDR bd_addr, tBTA_TRANSPORT transport, tBTA_DM_ENCRYPT_CBACK *p_callback, |
| tBTA_DM_BLE_SEC_ACT sec_act) |
| { |
| tBTA_DM_API_SET_ENCRYPTION *p_msg = (tBTA_DM_API_SET_ENCRYPTION *)osi_calloc(sizeof(tBTA_DM_API_SET_ENCRYPTION)); |
| |
| APPL_TRACE_API("%s", __func__); |
| |
| p_msg->hdr.event = BTA_DM_API_SET_ENCRYPTION_EVT; |
| memcpy(p_msg->bd_addr, bd_addr, BD_ADDR_LEN); |
| p_msg->transport = transport; |
| p_msg->p_callback = p_callback; |
| p_msg->sec_act = sec_act; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmCloseACL |
| ** |
| ** Description This function force to close an ACL connection and remove the |
| ** device from the security database list of known devices. |
| ** |
| ** Parameters: bd_addr - Address of the peer device |
| ** remove_dev - remove device or not after link down |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_DmCloseACL(BD_ADDR bd_addr, bool remove_dev, tBTA_TRANSPORT transport) |
| { |
| tBTA_DM_API_REMOVE_ACL *p_msg = |
| (tBTA_DM_API_REMOVE_ACL *)osi_calloc(sizeof(tBTA_DM_API_REMOVE_ACL)); |
| |
| APPL_TRACE_API("%s", __func__); |
| |
| p_msg->hdr.event = BTA_DM_API_REMOVE_ACL_EVT; |
| memcpy(p_msg->bd_addr, bd_addr, BD_ADDR_LEN); |
| p_msg->remove_dev = remove_dev; |
| p_msg->transport = transport; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| #if (BLE_INCLUDED == TRUE) |
| /******************************************************************************* |
| ** |
| ** Function BTA_DmBleObserve |
| ** |
| ** Description This procedure keep the device listening for advertising |
| ** events from a broadcast device. |
| ** |
| ** Parameters start: start or stop observe. |
| ** |
| ** Returns void |
| |
| ** |
| ** Returns void. |
| ** |
| *******************************************************************************/ |
| extern void BTA_DmBleObserve(bool start, uint8_t duration, |
| tBTA_DM_SEARCH_CBACK *p_results_cb) |
| { |
| tBTA_DM_API_BLE_OBSERVE *p_msg = |
| (tBTA_DM_API_BLE_OBSERVE *)osi_calloc(sizeof(tBTA_DM_API_BLE_OBSERVE)); |
| |
| APPL_TRACE_API("%s:start = %d ", __func__, start); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_OBSERVE_EVT; |
| p_msg->start = start; |
| p_msg->duration = duration; |
| p_msg->p_cback = p_results_cb; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_VendorInit |
| ** |
| ** Description This function initializes vendor specific |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_VendorInit (void) |
| { |
| APPL_TRACE_API("BTA_VendorInit"); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_VendorCleanup |
| ** |
| ** Description This function frees up Broadcom specific VS specific dynamic memory |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTA_VendorCleanup (void) |
| { |
| tBTM_BLE_VSC_CB cmn_ble_vsc_cb; |
| BTM_BleGetVendorCapabilities(&cmn_ble_vsc_cb); |
| |
| #if (BLE_INCLUDED == TRUE && BLE_ANDROID_CONTROLLER_SCAN_FILTER == TRUE) |
| if (cmn_ble_vsc_cb.max_filter > 0) |
| { |
| btm_ble_adv_filter_cleanup(); |
| #if (BLE_PRIVACY_SPT == TRUE) |
| btm_ble_resolving_list_cleanup (); |
| #endif |
| } |
| |
| if (cmn_ble_vsc_cb.tot_scan_results_strg > 0) |
| btm_ble_batchscan_cleanup(); |
| #endif |
| |
| if(cmn_ble_vsc_cb.adv_inst_max > 0) |
| btm_ble_multi_adv_cleanup(); |
| } |
| |
| #endif |