| /****************************************************************************** |
| * |
| * Copyright (C) 2003-2014 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This is the API implementation file for the BTA device manager. |
| * |
| ******************************************************************************/ |
| #include <string.h> |
| |
| #include "bt_common.h" |
| #include "bta_api.h" |
| #include "bta_closure_api.h" |
| #include "bta_dm_int.h" |
| #include "bta_sys.h" |
| #include "bta_sys_int.h" |
| #include "btm_api.h" |
| #include "btm_int.h" |
| #include "osi/include/osi.h" |
| #include "utl.h" |
| |
| /***************************************************************************** |
| * Constants |
| ****************************************************************************/ |
| |
| static const tBTA_SYS_REG bta_dm_reg = {bta_dm_sm_execute, bta_dm_sm_disable}; |
| |
| static const tBTA_SYS_REG bta_dm_search_reg = {bta_dm_search_sm_execute, |
| bta_dm_search_sm_disable}; |
| |
| /******************************************************************************* |
| * |
| * Function BTA_EnableBluetooth |
| * |
| * Description Enables bluetooth service. This function must be |
| * called before any other functions in the BTA API are called. |
| * |
| * |
| * Returns tBTA_STATUS |
| * |
| ******************************************************************************/ |
| tBTA_STATUS BTA_EnableBluetooth(tBTA_DM_SEC_CBACK* p_cback) { |
| /* Bluetooth disabling is in progress */ |
| if (bta_dm_cb.disabling) return BTA_FAILURE; |
| |
| bta_sys_register(BTA_ID_DM, &bta_dm_reg); |
| bta_sys_register(BTA_ID_DM_SEARCH, &bta_dm_search_reg); |
| |
| /* if UUID list is not provided as static data */ |
| bta_sys_eir_register(bta_dm_eir_update_uuid); |
| |
| tBTA_DM_API_ENABLE* p_msg = |
| (tBTA_DM_API_ENABLE*)osi_malloc(sizeof(tBTA_DM_API_ENABLE)); |
| p_msg->hdr.event = BTA_DM_API_ENABLE_EVT; |
| p_msg->p_sec_cback = p_cback; |
| |
| bta_sys_sendmsg(p_msg); |
| |
| return BTA_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DisableBluetooth |
| * |
| * Description Disables bluetooth service. This function is called when |
| * the application no longer needs bluetooth service |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| tBTA_STATUS BTA_DisableBluetooth(void) { |
| BT_HDR* p_msg = (BT_HDR*)osi_malloc(sizeof(BT_HDR)); |
| |
| p_msg->event = BTA_DM_API_DISABLE_EVT; |
| |
| bta_sys_sendmsg(p_msg); |
| |
| return BTA_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_EnableTestMode |
| * |
| * Description Enables bluetooth device under test mode |
| * |
| * |
| * Returns tBTA_STATUS |
| * |
| ******************************************************************************/ |
| tBTA_STATUS BTA_EnableTestMode(void) { |
| BT_HDR* p_msg = (BT_HDR*)osi_malloc(sizeof(BT_HDR)); |
| |
| APPL_TRACE_API("%s", __func__); |
| |
| p_msg->event = BTA_DM_API_ENABLE_TEST_MODE_EVT; |
| bta_sys_sendmsg(p_msg); |
| |
| return BTA_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DisableTestMode |
| * |
| * Description Disable bluetooth device under test mode |
| * |
| * |
| * Returns None |
| * |
| ******************************************************************************/ |
| void BTA_DisableTestMode(void) { |
| BT_HDR* p_msg = (BT_HDR*)osi_malloc(sizeof(BT_HDR)); |
| |
| APPL_TRACE_API("%s", __func__); |
| |
| p_msg->event = BTA_DM_API_DISABLE_TEST_MODE_EVT; |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmSetDeviceName |
| * |
| * Description This function sets the Bluetooth name of local device |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmSetDeviceName(char* p_name) { |
| tBTA_DM_API_SET_NAME* p_msg = |
| (tBTA_DM_API_SET_NAME*)osi_malloc(sizeof(tBTA_DM_API_SET_NAME)); |
| |
| p_msg->hdr.event = BTA_DM_API_SET_NAME_EVT; |
| strlcpy((char*)p_msg->name, p_name, BD_NAME_LEN); |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmSetVisibility |
| * |
| * Description This function sets the Bluetooth connectable, |
| * discoverable, pairable and conn paired only modes of local |
| * device |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmSetVisibility(tBTA_DM_DISC disc_mode, tBTA_DM_CONN conn_mode, |
| uint8_t pairable_mode, uint8_t conn_filter) { |
| tBTA_DM_API_SET_VISIBILITY* p_msg = |
| (tBTA_DM_API_SET_VISIBILITY*)osi_malloc(sizeof(tBTA_DM_MSG)); |
| |
| p_msg->hdr.event = BTA_DM_API_SET_VISIBILITY_EVT; |
| p_msg->disc_mode = disc_mode; |
| p_msg->conn_mode = conn_mode; |
| p_msg->pair_mode = pairable_mode; |
| p_msg->conn_paired_only = conn_filter; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmSearch |
| * |
| * Description This function searches for peer Bluetooth devices. It |
| * performs an inquiry and gets the remote name for devices. |
| * Service discovery is done if services is non zero |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmSearch(tBTA_DM_INQ* p_dm_inq, tBTA_SERVICE_MASK services, |
| tBTA_DM_SEARCH_CBACK* p_cback) { |
| tBTA_DM_API_SEARCH* p_msg = |
| (tBTA_DM_API_SEARCH*)osi_calloc(sizeof(tBTA_DM_API_SEARCH)); |
| |
| p_msg->hdr.event = BTA_DM_API_SEARCH_EVT; |
| memcpy(&p_msg->inq_params, p_dm_inq, sizeof(tBTA_DM_INQ)); |
| p_msg->services = services; |
| p_msg->p_cback = p_cback; |
| p_msg->rs_res = BTA_DM_RS_NONE; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmSearchCancel |
| * |
| * Description This function cancels a search initiated by BTA_DmSearch |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmSearchCancel(void) { |
| BT_HDR* p_msg = (BT_HDR*)osi_malloc(sizeof(BT_HDR)); |
| |
| p_msg->event = BTA_DM_API_SEARCH_CANCEL_EVT; |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmDiscover |
| * |
| * Description This function does service discovery for services of a |
| * peer device |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmDiscover(BD_ADDR bd_addr, tBTA_SERVICE_MASK services, |
| tBTA_DM_SEARCH_CBACK* p_cback, bool sdp_search) { |
| tBTA_DM_API_DISCOVER* p_msg = |
| (tBTA_DM_API_DISCOVER*)osi_calloc(sizeof(tBTA_DM_API_DISCOVER)); |
| |
| p_msg->hdr.event = BTA_DM_API_DISCOVER_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->services = services; |
| p_msg->p_cback = p_cback; |
| p_msg->sdp_search = sdp_search; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmDiscoverUUID |
| * |
| * Description This function does service discovery for services of a |
| * peer device |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmDiscoverUUID(BD_ADDR bd_addr, tSDP_UUID* uuid, |
| tBTA_DM_SEARCH_CBACK* p_cback, bool sdp_search) { |
| tBTA_DM_API_DISCOVER* p_msg = |
| (tBTA_DM_API_DISCOVER*)osi_malloc(sizeof(tBTA_DM_API_DISCOVER)); |
| |
| p_msg->hdr.event = BTA_DM_API_DISCOVER_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->services = BTA_USER_SERVICE_MASK; // Not exposed at API level |
| p_msg->p_cback = p_cback; |
| p_msg->sdp_search = sdp_search; |
| |
| p_msg->num_uuid = 0; |
| p_msg->p_uuid = NULL; |
| |
| memcpy(&p_msg->uuid, uuid, sizeof(tSDP_UUID)); |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBond |
| * |
| * Description This function initiates a bonding procedure with a peer |
| * device |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmBond(BD_ADDR bd_addr) { |
| tBTA_DM_API_BOND* p_msg = |
| (tBTA_DM_API_BOND*)osi_malloc(sizeof(tBTA_DM_API_BOND)); |
| |
| p_msg->hdr.event = BTA_DM_API_BOND_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->transport = BTA_TRANSPORT_UNKNOWN; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBondByTransports |
| * |
| * Description This function initiates a bonding procedure with a peer |
| * device |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmBondByTransport(BD_ADDR bd_addr, tBTA_TRANSPORT transport) { |
| tBTA_DM_API_BOND* p_msg = |
| (tBTA_DM_API_BOND*)osi_malloc(sizeof(tBTA_DM_API_BOND)); |
| |
| p_msg->hdr.event = BTA_DM_API_BOND_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->transport = transport; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBondCancel |
| * |
| * Description This function cancels the bonding procedure with a peer |
| * device |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmBondCancel(BD_ADDR bd_addr) { |
| tBTA_DM_API_BOND_CANCEL* p_msg = |
| (tBTA_DM_API_BOND_CANCEL*)osi_malloc(sizeof(tBTA_DM_API_BOND_CANCEL)); |
| |
| p_msg->hdr.event = BTA_DM_API_BOND_CANCEL_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmPinReply |
| * |
| * Description This function provides a pincode for a remote device when |
| * one is requested by DM through BTA_DM_PIN_REQ_EVT |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmPinReply(BD_ADDR bd_addr, bool accept, uint8_t pin_len, |
| uint8_t* p_pin) |
| |
| { |
| tBTA_DM_API_PIN_REPLY* p_msg = |
| (tBTA_DM_API_PIN_REPLY*)osi_malloc(sizeof(tBTA_DM_API_PIN_REPLY)); |
| |
| p_msg->hdr.event = BTA_DM_API_PIN_REPLY_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->accept = accept; |
| if (accept) { |
| p_msg->pin_len = pin_len; |
| memcpy(p_msg->p_pin, p_pin, pin_len); |
| } |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmLocalOob |
| * |
| * Description This function retrieves the OOB data from local controller. |
| * The result is reported by: |
| * - bta_dm_co_loc_oob_ext() if device supports secure |
| * connections (SC) |
| * - bta_dm_co_loc_oob() if device doesn't support SC |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmLocalOob(void) { |
| tBTA_DM_API_LOC_OOB* p_msg = |
| (tBTA_DM_API_LOC_OOB*)osi_malloc(sizeof(tBTA_DM_API_LOC_OOB)); |
| |
| p_msg->hdr.event = BTA_DM_API_LOC_OOB_EVT; |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmConfirm |
| * |
| * Description This function accepts or rejects the numerical value of the |
| * Simple Pairing process on BTA_DM_SP_CFM_REQ_EVT |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmConfirm(BD_ADDR bd_addr, bool accept) { |
| tBTA_DM_API_CONFIRM* p_msg = |
| (tBTA_DM_API_CONFIRM*)osi_malloc(sizeof(tBTA_DM_API_CONFIRM)); |
| |
| p_msg->hdr.event = BTA_DM_API_CONFIRM_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->accept = accept; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmAddDevice |
| * |
| * Description This function adds a device to the security database list of |
| * peer device |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmAddDevice(BD_ADDR bd_addr, DEV_CLASS dev_class, LINK_KEY link_key, |
| tBTA_SERVICE_MASK trusted_mask, bool is_trusted, |
| uint8_t key_type, tBTA_IO_CAP io_cap, uint8_t pin_length) { |
| tBTA_DM_API_ADD_DEVICE* p_msg = |
| (tBTA_DM_API_ADD_DEVICE*)osi_calloc(sizeof(tBTA_DM_API_ADD_DEVICE)); |
| |
| p_msg->hdr.event = BTA_DM_API_ADD_DEVICE_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->tm = trusted_mask; |
| p_msg->is_trusted = is_trusted; |
| p_msg->io_cap = io_cap; |
| |
| if (link_key) { |
| p_msg->link_key_known = true; |
| p_msg->key_type = key_type; |
| memcpy(p_msg->link_key, link_key, LINK_KEY_LEN); |
| } |
| |
| /* Load device class if specified */ |
| if (dev_class) { |
| p_msg->dc_known = true; |
| memcpy(p_msg->dc, dev_class, DEV_CLASS_LEN); |
| } |
| |
| memset(p_msg->bd_name, 0, BD_NAME_LEN + 1); |
| memset(p_msg->features, 0, sizeof(p_msg->features)); |
| p_msg->pin_length = pin_length; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmRemoveDevice |
| * |
| * Description This function removes a device fromthe security database |
| * list of peer device. It manages unpairing even while |
| * connected. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| tBTA_STATUS BTA_DmRemoveDevice(BD_ADDR bd_addr) { |
| tBTA_DM_API_REMOVE_DEVICE* p_msg = |
| (tBTA_DM_API_REMOVE_DEVICE*)osi_calloc(sizeof(tBTA_DM_API_REMOVE_DEVICE)); |
| |
| p_msg->hdr.event = BTA_DM_API_REMOVE_DEVICE_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| |
| bta_sys_sendmsg(p_msg); |
| |
| return BTA_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_GetEirService |
| * |
| * Description This function is called to get BTA service mask from EIR. |
| * |
| * Parameters p_eir - pointer of EIR significant part |
| * p_services - return the BTA service mask |
| * |
| * Returns None |
| * |
| ******************************************************************************/ |
| extern const uint16_t bta_service_id_to_uuid_lkup_tbl[]; |
| void BTA_GetEirService(uint8_t* p_eir, tBTA_SERVICE_MASK* p_services) { |
| uint8_t xx, yy; |
| uint8_t num_uuid, max_num_uuid = 32; |
| uint8_t uuid_list[32 * LEN_UUID_16]; |
| uint16_t* p_uuid16 = (uint16_t*)uuid_list; |
| tBTA_SERVICE_MASK mask; |
| |
| BTM_GetEirUuidList(p_eir, LEN_UUID_16, &num_uuid, uuid_list, max_num_uuid); |
| for (xx = 0; xx < num_uuid; xx++) { |
| mask = 1; |
| for (yy = 0; yy < BTA_MAX_SERVICE_ID; yy++) { |
| if (*(p_uuid16 + xx) == bta_service_id_to_uuid_lkup_tbl[yy]) { |
| *p_services |= mask; |
| break; |
| } |
| mask <<= 1; |
| } |
| |
| /* for HSP v1.2 only device */ |
| if (*(p_uuid16 + xx) == UUID_SERVCLASS_HEADSET_HS) |
| *p_services |= BTA_HSP_SERVICE_MASK; |
| |
| if (*(p_uuid16 + xx) == UUID_SERVCLASS_HDP_SOURCE) |
| *p_services |= BTA_HL_SERVICE_MASK; |
| |
| if (*(p_uuid16 + xx) == UUID_SERVCLASS_HDP_SINK) |
| *p_services |= BTA_HL_SERVICE_MASK; |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmGetConnectionState |
| * |
| * Description Returns whether the remote device is currently connected. |
| * |
| * Returns 0 if the device is NOT connected. |
| * |
| ******************************************************************************/ |
| uint16_t BTA_DmGetConnectionState(const BD_ADDR bd_addr) { |
| tBTA_DM_PEER_DEVICE* p_dev = bta_dm_find_peer_device(bd_addr); |
| return (p_dev && p_dev->conn_state == BTA_DM_CONNECTED); |
| } |
| |
| /******************************************************************************* |
| * Device Identification (DI) Server Functions |
| ******************************************************************************/ |
| /******************************************************************************* |
| * |
| * Function BTA_DmSetLocalDiRecord |
| * |
| * Description This function adds a DI record to the local SDP database. |
| * |
| * Returns BTA_SUCCESS if record set sucessfully, otherwise error code. |
| * |
| ******************************************************************************/ |
| tBTA_STATUS BTA_DmSetLocalDiRecord(tBTA_DI_RECORD* p_device_info, |
| uint32_t* p_handle) { |
| tBTA_STATUS status = BTA_FAILURE; |
| |
| if (bta_dm_di_cb.di_num < BTA_DI_NUM_MAX) { |
| if (SDP_SetLocalDiRecord((tSDP_DI_RECORD*)p_device_info, p_handle) == |
| SDP_SUCCESS) { |
| if (!p_device_info->primary_record) { |
| bta_dm_di_cb.di_handle[bta_dm_di_cb.di_num] = *p_handle; |
| bta_dm_di_cb.di_num++; |
| } |
| |
| bta_sys_add_uuid(UUID_SERVCLASS_PNP_INFORMATION); |
| status = BTA_SUCCESS; |
| } |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dmexecutecallback |
| * |
| * Description This function will request BTA to execute a call back in the |
| * context of BTU task. |
| * This API was named in lower case because it is only intended |
| * for the internal customers(like BTIF). |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_dmexecutecallback(tBTA_DM_EXEC_CBACK* p_callback, void* p_param) { |
| tBTA_DM_API_EXECUTE_CBACK* p_msg = |
| (tBTA_DM_API_EXECUTE_CBACK*)osi_malloc(sizeof(tBTA_DM_MSG)); |
| |
| p_msg->hdr.event = BTA_DM_API_EXECUTE_CBACK_EVT; |
| p_msg->p_param = p_param; |
| p_msg->p_exec_cback = p_callback; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmAddBleKey |
| * |
| * Description Add/modify LE device information. This function will be |
| * normally called during host startup to restore all required |
| * information stored in the NVRAM. |
| * |
| * Parameters: bd_addr - BD address of the peer |
| * p_le_key - LE key values. |
| * key_type - LE SMP key type. |
| * |
| * Returns BTA_SUCCESS if successful |
| * BTA_FAIL if operation failed. |
| * |
| ******************************************************************************/ |
| void BTA_DmAddBleKey(BD_ADDR bd_addr, tBTA_LE_KEY_VALUE* p_le_key, |
| tBTA_LE_KEY_TYPE key_type) { |
| tBTA_DM_API_ADD_BLEKEY* p_msg = |
| (tBTA_DM_API_ADD_BLEKEY*)osi_calloc(sizeof(tBTA_DM_API_ADD_BLEKEY)); |
| |
| p_msg->hdr.event = BTA_DM_API_ADD_BLEKEY_EVT; |
| p_msg->key_type = key_type; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| memcpy(&p_msg->blekey, p_le_key, sizeof(tBTA_LE_KEY_VALUE)); |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmAddBleDevice |
| * |
| * Description Add a BLE device. This function will be normally called |
| * during host startup to restore all required information |
| * for a LE device stored in the NVRAM. |
| * |
| * Parameters: bd_addr - BD address of the peer |
| * dev_type - Remote device's device type. |
| * addr_type - LE device address type. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type, |
| tBT_DEVICE_TYPE dev_type) { |
| tBTA_DM_API_ADD_BLE_DEVICE* p_msg = (tBTA_DM_API_ADD_BLE_DEVICE*)osi_calloc( |
| sizeof(tBTA_DM_API_ADD_BLE_DEVICE)); |
| |
| p_msg->hdr.event = BTA_DM_API_ADD_BLEDEVICE_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->addr_type = addr_type; |
| p_msg->dev_type = dev_type; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBlePasskeyReply |
| * |
| * Description Send BLE SMP passkey reply. |
| * |
| * Parameters: bd_addr - BD address of the peer |
| * accept - passkey entry sucessful or declined. |
| * passkey - passkey value, must be a 6 digit number, |
| * can be lead by 0. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmBlePasskeyReply(BD_ADDR bd_addr, bool accept, uint32_t passkey) { |
| tBTA_DM_API_PASSKEY_REPLY* p_msg = |
| (tBTA_DM_API_PASSKEY_REPLY*)osi_calloc(sizeof(tBTA_DM_API_PASSKEY_REPLY)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_PASSKEY_REPLY_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->accept = accept; |
| |
| if (accept) p_msg->passkey = passkey; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleConfirmReply |
| * |
| * Description Send BLE SMP SC user confirmation reply. |
| * |
| * Parameters: bd_addr - BD address of the peer |
| * accept - numbers to compare are the same or |
| * different. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmBleConfirmReply(BD_ADDR bd_addr, bool accept) { |
| tBTA_DM_API_CONFIRM* p_msg = |
| (tBTA_DM_API_CONFIRM*)osi_calloc(sizeof(tBTA_DM_API_CONFIRM)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_CONFIRM_REPLY_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->accept = accept; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleSecurityGrant |
| * |
| * Description Grant security request access. |
| * |
| * Parameters: bd_addr - BD address of the peer |
| * res - security grant status. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmBleSecurityGrant(BD_ADDR bd_addr, tBTA_DM_BLE_SEC_GRANT res) { |
| tBTA_DM_API_BLE_SEC_GRANT* p_msg = |
| (tBTA_DM_API_BLE_SEC_GRANT*)osi_calloc(sizeof(tBTA_DM_API_BLE_SEC_GRANT)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_SEC_GRANT_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->res = res; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmSetBlePrefConnParams |
| * |
| * Description This function is called to set the preferred connection |
| * parameters when default connection parameter is not desired. |
| * |
| * Parameters: bd_addr - BD address of the peripheral |
| * scan_interval - scan interval |
| * scan_window - scan window |
| * min_conn_int - minimum preferred connection interval |
| * max_conn_int - maximum preferred connection interval |
| * slave_latency - preferred slave latency |
| * supervision_tout - preferred supervision timeout |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmSetBlePrefConnParams(const BD_ADDR bd_addr, uint16_t min_conn_int, |
| uint16_t max_conn_int, uint16_t slave_latency, |
| uint16_t supervision_tout) { |
| tBTA_DM_API_BLE_CONN_PARAMS* p_msg = (tBTA_DM_API_BLE_CONN_PARAMS*)osi_calloc( |
| sizeof(tBTA_DM_API_BLE_CONN_PARAMS)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_CONN_PARAM_EVT; |
| memcpy(p_msg->peer_bda, bd_addr, BD_ADDR_LEN); |
| p_msg->conn_int_max = max_conn_int; |
| p_msg->conn_int_min = min_conn_int; |
| p_msg->slave_latency = slave_latency; |
| p_msg->supervision_tout = supervision_tout; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmSetBleConnScanParams |
| * |
| * Description This function is called to set scan parameters used in |
| * BLE connection request |
| * |
| * Parameters: scan_interval - scan interval |
| * scan_window - scan window |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmSetBleConnScanParams(uint32_t scan_interval, uint32_t scan_window) { |
| tBTA_DM_API_BLE_SCAN_PARAMS* p_msg = (tBTA_DM_API_BLE_SCAN_PARAMS*)osi_calloc( |
| sizeof(tBTA_DM_API_BLE_SCAN_PARAMS)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_CONN_SCAN_PARAM_EVT; |
| p_msg->scan_int = scan_interval; |
| p_msg->scan_window = scan_window; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmSetBleScanParams |
| * |
| * Description This function is called to set scan parameters |
| * |
| * Parameters: client_if - Client IF |
| * scan_interval - scan interval |
| * scan_window - scan window |
| * scan_mode - scan mode |
| * scan_param_setup_status_cback - Set scan param status |
| * callback |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| |
| void BTA_DmSetBleScanParams( |
| tGATT_IF client_if, uint32_t scan_interval, uint32_t scan_window, |
| tBLE_SCAN_MODE scan_mode, |
| tBLE_SCAN_PARAM_SETUP_CBACK scan_param_setup_cback) { |
| tBTA_DM_API_BLE_SCAN_PARAMS* p_msg = (tBTA_DM_API_BLE_SCAN_PARAMS*)osi_calloc( |
| sizeof(tBTA_DM_API_BLE_SCAN_PARAMS)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_SCAN_PARAM_EVT; |
| p_msg->client_if = client_if; |
| p_msg->scan_int = scan_interval; |
| p_msg->scan_window = scan_window; |
| p_msg->scan_mode = scan_mode; |
| p_msg->scan_param_setup_cback = scan_param_setup_cback; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmSetBleAdvParams |
| * |
| * Description This function sets the advertising parameters BLE |
| * functionality. |
| * It is to be called when device act in peripheral or |
| * broadcaster role. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmSetBleAdvParams(uint16_t adv_int_min, uint16_t adv_int_max, |
| tBLE_BD_ADDR* p_dir_bda) { |
| if (p_dir_bda != NULL) { |
| tBLE_BD_ADDR* bda = new tBLE_BD_ADDR; |
| memcpy(bda, p_dir_bda, sizeof(tBLE_BD_ADDR)); |
| do_in_bta_thread(FROM_HERE, |
| base::Bind(&bta_dm_ble_set_adv_params, adv_int_min, |
| adv_int_max, base::Owned(bda))); |
| } |
| |
| do_in_bta_thread(FROM_HERE, base::Bind(&bta_dm_ble_set_adv_params, |
| adv_int_min, adv_int_max, nullptr)); |
| } |
| |
| /******************************************************************************* |
| * BLE ADV data management API |
| ******************************************************************************/ |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleSetStorageParams |
| * |
| * Description This function is called to override the BTA scan response. |
| * |
| * Parameters batch_scan_full_max -Max storage space (in %) allocated to |
| * full scanning |
| * batch_scan_trunc_max -Max storage space (in %) allocated to |
| * truncated scanning |
| * batch_scan_notify_threshold -Setup notification level based |
| * on total space |
| * p_setup_cback - Setup callback pointer |
| * p_thres_cback - Threshold callback pointer |
| * p_rep_cback - Reports callback pointer |
| * ref_value - Ref value |
| * |
| * Returns None |
| * |
| ******************************************************************************/ |
| extern void BTA_DmBleSetStorageParams( |
| uint8_t batch_scan_full_max, uint8_t batch_scan_trunc_max, |
| uint8_t batch_scan_notify_threshold, |
| tBTA_BLE_SCAN_SETUP_CBACK* p_setup_cback, |
| tBTA_BLE_SCAN_THRESHOLD_CBACK* p_thres_cback, |
| tBTA_BLE_SCAN_REP_CBACK* p_rep_cback, tBTA_DM_BLE_REF_VALUE ref_value) { |
| tBTA_DM_API_SET_STORAGE_CONFIG* p_msg = |
| (tBTA_DM_API_SET_STORAGE_CONFIG*)osi_malloc( |
| sizeof(tBTA_DM_API_SET_STORAGE_CONFIG)); |
| |
| bta_dm_cb.p_setup_cback = p_setup_cback; |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_SETUP_STORAGE_EVT; |
| p_msg->p_setup_cback = bta_ble_scan_setup_cb; |
| p_msg->p_thres_cback = p_thres_cback; |
| p_msg->p_read_rep_cback = p_rep_cback; |
| p_msg->ref_value = ref_value; |
| p_msg->batch_scan_full_max = batch_scan_full_max; |
| p_msg->batch_scan_trunc_max = batch_scan_trunc_max; |
| p_msg->batch_scan_notify_threshold = batch_scan_notify_threshold; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleEnableBatchScan |
| * |
| * Description This function is called to enable the batch scan |
| * |
| * Parameters scan_mode -Batch scan mode |
| * scan_interval - Scan interval |
| * scan_window - Scan window |
| * discard_rule -Discard rules |
| * addr_type - Address type |
| * ref_value - Reference value |
| * |
| * Returns None |
| * |
| ******************************************************************************/ |
| extern void BTA_DmBleEnableBatchScan(tBTA_BLE_BATCH_SCAN_MODE scan_mode, |
| uint32_t scan_interval, |
| uint32_t scan_window, |
| tBTA_BLE_DISCARD_RULE discard_rule, |
| tBLE_ADDR_TYPE addr_type, |
| tBTA_DM_BLE_REF_VALUE ref_value) { |
| tBTA_DM_API_ENABLE_SCAN* p_msg = |
| (tBTA_DM_API_ENABLE_SCAN*)osi_malloc(sizeof(tBTA_DM_API_ENABLE_SCAN)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_ENABLE_BATCH_SCAN_EVT; |
| p_msg->scan_mode = scan_mode; |
| p_msg->scan_int = scan_interval; |
| p_msg->scan_window = scan_window; |
| p_msg->discard_rule = discard_rule; |
| p_msg->addr_type = addr_type; |
| p_msg->ref_value = ref_value; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleDisableBatchScan |
| * |
| * Description This function is called to disable the batch scan |
| * |
| * Parameters ref_value - Reference value |
| * |
| * Returns None |
| * |
| ******************************************************************************/ |
| extern void BTA_DmBleDisableBatchScan(tBTA_DM_BLE_REF_VALUE ref_value) { |
| tBTA_DM_API_DISABLE_SCAN* p_msg = |
| (tBTA_DM_API_DISABLE_SCAN*)osi_malloc(sizeof(tBTA_DM_API_DISABLE_SCAN)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_DISABLE_BATCH_SCAN_EVT; |
| p_msg->ref_value = ref_value; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleReadScanReports |
| * |
| * Description This function is called to read scan reports |
| * |
| * Parameters scan_type -Batch scan mode |
| * ref_value - Reference value |
| * |
| * Returns None |
| * |
| ******************************************************************************/ |
| extern void BTA_DmBleReadScanReports(tBTA_BLE_BATCH_SCAN_MODE scan_type, |
| tBTA_DM_BLE_REF_VALUE ref_value) { |
| tBTA_DM_API_READ_SCAN_REPORTS* p_msg = |
| (tBTA_DM_API_READ_SCAN_REPORTS*)osi_malloc( |
| sizeof(tBTA_DM_API_READ_SCAN_REPORTS)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_READ_SCAN_REPORTS_EVT; |
| p_msg->scan_type = scan_type; |
| p_msg->ref_value = ref_value; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleTrackAdvertiser |
| * |
| * Description This function is called to track advertiser |
| * |
| * Parameters ref_value - Reference value |
| * p_track_adv_cback - Track ADV callback |
| * |
| * Returns None |
| * |
| ******************************************************************************/ |
| extern void BTA_DmBleTrackAdvertiser( |
| tBTA_DM_BLE_REF_VALUE ref_value, |
| tBTA_BLE_TRACK_ADV_CBACK* p_track_adv_cback) { |
| tBTA_DM_API_TRACK_ADVERTISER* p_msg = |
| (tBTA_DM_API_TRACK_ADVERTISER*)osi_malloc( |
| sizeof(tBTA_DM_API_TRACK_ADVERTISER)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_TRACK_ADVERTISER_EVT; |
| p_msg->p_track_adv_cback = p_track_adv_cback; |
| p_msg->ref_value = ref_value; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * BLE ADV data management API |
| ******************************************************************************/ |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleSetBgConnType |
| * |
| * Description This function is called to set BLE connectable mode for a |
| * peripheral device. |
| * |
| * Parameters bg_conn_type: it can be auto connection, or selective |
| * connection. |
| * p_select_cback: callback function when selective connection |
| * procedure is being used. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmBleSetBgConnType(tBTA_DM_BLE_CONN_TYPE bg_conn_type, |
| tBTA_DM_BLE_SEL_CBACK* p_select_cback) { |
| tBTA_DM_API_BLE_SET_BG_CONN_TYPE* p_msg = |
| (tBTA_DM_API_BLE_SET_BG_CONN_TYPE*)osi_calloc( |
| sizeof(tBTA_DM_API_BLE_SET_BG_CONN_TYPE)); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_SET_BG_CONN_TYPE; |
| p_msg->bg_conn_type = bg_conn_type; |
| p_msg->p_select_cback = p_select_cback; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_discover_send_msg |
| * |
| * Description This function send discover message to BTA task. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_dm_discover_send_msg(BD_ADDR bd_addr, |
| tBTA_SERVICE_MASK_EXT* p_services, |
| tBTA_DM_SEARCH_CBACK* p_cback, |
| bool sdp_search, |
| tBTA_TRANSPORT transport) { |
| const size_t len = p_services ? (sizeof(tBTA_DM_API_DISCOVER) + |
| sizeof(tBT_UUID) * p_services->num_uuid) |
| : sizeof(tBTA_DM_API_DISCOVER); |
| tBTA_DM_API_DISCOVER* p_msg = (tBTA_DM_API_DISCOVER*)osi_calloc(len); |
| |
| p_msg->hdr.event = BTA_DM_API_DISCOVER_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->p_cback = p_cback; |
| p_msg->sdp_search = sdp_search; |
| p_msg->transport = transport; |
| |
| if (p_services != NULL) { |
| p_msg->services = p_services->srvc_mask; |
| p_msg->num_uuid = p_services->num_uuid; |
| if (p_services->num_uuid != 0) { |
| p_msg->p_uuid = (tBT_UUID*)(p_msg + 1); |
| memcpy(p_msg->p_uuid, p_services->p_uuid, |
| sizeof(tBT_UUID) * p_services->num_uuid); |
| } |
| } |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmDiscoverByTransport |
| * |
| * Description This function does service discovery on particular transport |
| * for services of a |
| * peer device. When services.num_uuid is 0, it indicates all |
| * GATT based services are to be searched; otherwise a list of |
| * UUID of interested services should be provided through |
| * p_services->p_uuid. |
| * |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmDiscoverByTransport(BD_ADDR bd_addr, |
| tBTA_SERVICE_MASK_EXT* p_services, |
| tBTA_DM_SEARCH_CBACK* p_cback, bool sdp_search, |
| tBTA_TRANSPORT transport) { |
| bta_dm_discover_send_msg(bd_addr, p_services, p_cback, sdp_search, transport); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmDiscoverExt |
| * |
| * Description This function does service discovery for services of a |
| * peer device. When services.num_uuid is 0, it indicates all |
| * GATT based services are to be searched; other wise a list of |
| * UUID of interested services should be provided through |
| * p_services->p_uuid. |
| * |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmDiscoverExt(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT* p_services, |
| tBTA_DM_SEARCH_CBACK* p_cback, bool sdp_search) { |
| bta_dm_discover_send_msg(bd_addr, p_services, p_cback, sdp_search, |
| BTA_TRANSPORT_UNKNOWN); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmSearchExt |
| * |
| * Description This function searches for peer Bluetooth devices. It |
| * performs an inquiry and gets the remote name for devices. |
| * Service discovery is done if services is non zero |
| * |
| * Parameters p_dm_inq: inquiry conditions |
| * p_services: if service is not empty, service discovery will |
| * be done. For all GATT based service conditions, |
| * put num_uuid, and p_uuid is the pointer to the |
| * list of UUID values. |
| * p_cback: callback function when search is completed. |
| * |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmSearchExt(tBTA_DM_INQ* p_dm_inq, tBTA_SERVICE_MASK_EXT* p_services, |
| tBTA_DM_SEARCH_CBACK* p_cback) { |
| const size_t len = p_services ? (sizeof(tBTA_DM_API_SEARCH) + |
| sizeof(tBT_UUID) * p_services->num_uuid) |
| : sizeof(tBTA_DM_API_SEARCH); |
| tBTA_DM_API_SEARCH* p_msg = (tBTA_DM_API_SEARCH*)osi_calloc(len); |
| |
| p_msg->hdr.event = BTA_DM_API_SEARCH_EVT; |
| memcpy(&p_msg->inq_params, p_dm_inq, sizeof(tBTA_DM_INQ)); |
| p_msg->p_cback = p_cback; |
| p_msg->rs_res = BTA_DM_RS_NONE; |
| |
| if (p_services != NULL) { |
| p_msg->services = p_services->srvc_mask; |
| p_msg->num_uuid = p_services->num_uuid; |
| |
| if (p_services->num_uuid != 0) { |
| p_msg->p_uuid = (tBT_UUID*)(p_msg + 1); |
| memcpy(p_msg->p_uuid, p_services->p_uuid, |
| sizeof(tBT_UUID) * p_services->num_uuid); |
| } else { |
| p_msg->p_uuid = NULL; |
| } |
| } |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleUpdateConnectionParam |
| * |
| * Description Update connection parameters, can only be used when |
| * connection is up. |
| * |
| * Parameters: bd_addr - BD address of the peer |
| * min_int - minimum connection interval, |
| * [0x0004 ~ 0x4000] |
| * max_int - maximum connection interval, |
| * [0x0004 ~ 0x4000] |
| * latency - slave latency [0 ~ 500] |
| * timeout - supervision timeout [0x000a ~ 0xc80] |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmBleUpdateConnectionParam(BD_ADDR bd_addr, uint16_t min_int, |
| uint16_t max_int, uint16_t latency, |
| uint16_t timeout) { |
| tBTA_DM_API_UPDATE_CONN_PARAM* p_msg = |
| (tBTA_DM_API_UPDATE_CONN_PARAM*)osi_calloc( |
| sizeof(tBTA_DM_API_UPDATE_CONN_PARAM)); |
| |
| p_msg->hdr.event = BTA_DM_API_UPDATE_CONN_PARAM_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->min_int = min_int; |
| p_msg->max_int = max_int; |
| p_msg->latency = latency; |
| p_msg->timeout = timeout; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleConfigLocalPrivacy |
| * |
| * Description Enable/disable privacy on the local device |
| * |
| * Parameters: privacy_enable - enable/disabe privacy on remote device. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmBleConfigLocalPrivacy(bool privacy_enable) { |
| #if (BLE_PRIVACY_SPT == TRUE) |
| tBTA_DM_API_LOCAL_PRIVACY* p_msg = (tBTA_DM_API_LOCAL_PRIVACY*)osi_calloc( |
| sizeof(tBTA_DM_API_ENABLE_PRIVACY)); |
| |
| p_msg->hdr.event = BTA_DM_API_LOCAL_PRIVACY_EVT; |
| p_msg->privacy_enable = privacy_enable; |
| |
| bta_sys_sendmsg(p_msg); |
| #else |
| UNUSED(privacy_enable); |
| #endif |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleCfgFilterCondition |
| * |
| * Description This function is called to configure the adv data payload |
| * filter condition. |
| * |
| * Parameters action: to read/write/clear |
| * cond_type: filter condition type |
| * filt_index - Filter index |
| * p_cond: filter condition parameter |
| * p_cmpl_back - Command completed callback |
| * ref_value - Reference value |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| #if (BLE_ANDROID_CONTROLLER_SCAN_FILTER == TRUE) |
| void BTA_DmBleCfgFilterCondition(tBTA_DM_BLE_SCAN_COND_OP action, |
| tBTA_DM_BLE_PF_COND_TYPE cond_type, |
| tBTA_DM_BLE_PF_FILT_INDEX filt_index, |
| tBTA_DM_BLE_PF_COND_PARAM* p_cond, |
| tBTA_DM_BLE_PF_CFG_CBACK* p_cmpl_cback, |
| tBTA_DM_BLE_REF_VALUE ref_value) { |
| tBTA_DM_API_CFG_FILTER_COND* p_msg; |
| APPL_TRACE_API("BTA_DmBleCfgFilterCondition: %d, %d", action, cond_type); |
| |
| uint16_t len = |
| sizeof(tBTA_DM_API_CFG_FILTER_COND) + sizeof(tBTA_DM_BLE_PF_COND_PARAM); |
| uint8_t* p; |
| |
| if (NULL != p_cond) { |
| switch (cond_type) { |
| case BTA_DM_BLE_PF_SRVC_DATA_PATTERN: |
| case BTA_DM_BLE_PF_MANU_DATA: |
| /* Length of pattern and pattern mask and other elements in */ |
| /* tBTA_DM_BLE_PF_MANU_COND */ |
| len += ((p_cond->manu_data.data_len) * 2) + sizeof(uint16_t) + |
| sizeof(uint16_t) + sizeof(uint8_t); |
| break; |
| |
| case BTA_DM_BLE_PF_LOCAL_NAME: |
| len += ((p_cond->local_name.data_len) + sizeof(uint8_t)); |
| break; |
| |
| case BTM_BLE_PF_SRVC_UUID: |
| case BTM_BLE_PF_SRVC_SOL_UUID: |
| len += sizeof(tBLE_BD_ADDR) + sizeof(tBTA_DM_BLE_PF_COND_MASK); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| p_msg = (tBTA_DM_API_CFG_FILTER_COND*)osi_calloc(len); |
| p_msg->hdr.event = BTA_DM_API_CFG_FILTER_COND_EVT; |
| p_msg->action = action; |
| p_msg->cond_type = cond_type; |
| p_msg->filt_index = filt_index; |
| p_msg->p_filt_cfg_cback = p_cmpl_cback; |
| p_msg->ref_value = ref_value; |
| if (p_cond) { |
| p_msg->p_cond_param = (tBTA_DM_BLE_PF_COND_PARAM*)(p_msg + 1); |
| memcpy(p_msg->p_cond_param, p_cond, sizeof(tBTA_DM_BLE_PF_COND_PARAM)); |
| |
| p = (uint8_t*)(p_msg->p_cond_param + 1); |
| |
| if (cond_type == BTA_DM_BLE_PF_SRVC_DATA_PATTERN || |
| cond_type == BTA_DM_BLE_PF_MANU_DATA) { |
| p_msg->p_cond_param->manu_data.p_pattern = p; |
| p_msg->p_cond_param->manu_data.data_len = p_cond->manu_data.data_len; |
| memcpy(p_msg->p_cond_param->manu_data.p_pattern, |
| p_cond->manu_data.p_pattern, p_cond->manu_data.data_len); |
| p += p_cond->manu_data.data_len; |
| |
| if (cond_type == BTA_DM_BLE_PF_MANU_DATA) { |
| p_msg->p_cond_param->manu_data.company_id_mask = |
| p_cond->manu_data.company_id_mask; |
| if (p_cond->manu_data.p_pattern_mask != NULL) { |
| p_msg->p_cond_param->manu_data.p_pattern_mask = p; |
| memcpy(p_msg->p_cond_param->manu_data.p_pattern_mask, |
| p_cond->manu_data.p_pattern_mask, p_cond->manu_data.data_len); |
| } |
| } |
| } else if (cond_type == BTA_DM_BLE_PF_LOCAL_NAME) { |
| p_msg->p_cond_param->local_name.p_data = p; |
| p_msg->p_cond_param->local_name.data_len = p_cond->local_name.data_len; |
| memcpy(p_msg->p_cond_param->local_name.p_data, p_cond->local_name.p_data, |
| p_cond->local_name.data_len); |
| } else if (cond_type == BTM_BLE_PF_SRVC_UUID || |
| cond_type == BTM_BLE_PF_SRVC_SOL_UUID) { |
| if (p_cond->srvc_uuid.p_target_addr != NULL) { |
| p_msg->p_cond_param->srvc_uuid.p_target_addr = (tBLE_BD_ADDR*)(p); |
| p_msg->p_cond_param->srvc_uuid.p_target_addr->type = |
| p_cond->srvc_uuid.p_target_addr->type; |
| memcpy(p_msg->p_cond_param->srvc_uuid.p_target_addr->bda, |
| p_cond->srvc_uuid.p_target_addr->bda, BD_ADDR_LEN); |
| p = (uint8_t*)(p_msg->p_cond_param->srvc_uuid.p_target_addr + 1); |
| } |
| if (p_cond->srvc_uuid.p_uuid_mask) { |
| p_msg->p_cond_param->srvc_uuid.p_uuid_mask = |
| (tBTA_DM_BLE_PF_COND_MASK*)p; |
| memcpy(p_msg->p_cond_param->srvc_uuid.p_uuid_mask, |
| p_cond->srvc_uuid.p_uuid_mask, sizeof(tBTA_DM_BLE_PF_COND_MASK)); |
| } |
| } |
| } |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| #else |
| void BTA_DmBleCfgFilterCondition( |
| UNUSED_ATTR tBTA_DM_BLE_SCAN_COND_OP action, |
| UNUSED_ATTR tBTA_DM_BLE_PF_COND_TYPE cond_type, |
| UNUSED_ATTR tBTA_DM_BLE_PF_FILT_INDEX filt_index, |
| UNUSED_ATTR tBTA_DM_BLE_PF_COND_PARAM* p_cond, |
| UNUSED_ATTR tBTA_DM_BLE_PF_CFG_CBACK* p_cmpl_cback, |
| UNUSED_ATTR tBTA_DM_BLE_REF_VALUE ref_value) {} |
| #endif |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleScanFilterSetup |
| * |
| * Description This function is called to setup the adv data payload filter |
| * param |
| * |
| * Parameters p_target: enable the filter condition on a target device; if |
| * NULL |
| * filt_index - Filter index |
| * p_filt_params -Filter parameters |
| * ref_value - Reference value |
| * action - Add, delete or clear |
| * p_cmpl_back - Command completed callback |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| #if (BLE_ANDROID_CONTROLLER_SCAN_FILTER == TRUE) |
| void BTA_DmBleScanFilterSetup(uint8_t action, |
| tBTA_DM_BLE_PF_FILT_INDEX filt_index, |
| tBTA_DM_BLE_PF_FILT_PARAMS* p_filt_params, |
| tBLE_BD_ADDR* p_target, |
| tBTA_DM_BLE_PF_PARAM_CBACK* p_cmpl_cback, |
| tBTA_DM_BLE_REF_VALUE ref_value) { |
| const size_t len = |
| sizeof(tBTA_DM_API_SCAN_FILTER_PARAM_SETUP) + sizeof(tBLE_BD_ADDR); |
| tBTA_DM_API_SCAN_FILTER_PARAM_SETUP* p_msg = |
| (tBTA_DM_API_SCAN_FILTER_PARAM_SETUP*)osi_calloc(len); |
| |
| APPL_TRACE_API("%s: %d", __func__, action); |
| |
| p_msg->hdr.event = BTA_DM_API_SCAN_FILTER_SETUP_EVT; |
| p_msg->action = action; |
| p_msg->filt_index = filt_index; |
| if (p_filt_params) { |
| memcpy(&p_msg->filt_params, p_filt_params, |
| sizeof(tBTA_DM_BLE_PF_FILT_PARAMS)); |
| } |
| p_msg->p_filt_param_cback = p_cmpl_cback; |
| p_msg->ref_value = ref_value; |
| |
| if (p_target) { |
| p_msg->p_target = (tBLE_BD_ADDR*)(p_msg + 1); |
| memcpy(p_msg->p_target, p_target, sizeof(tBLE_BD_ADDR)); |
| } |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| #else |
| void BTA_DmBleScanFilterSetup( |
| UNUSED_ATTR uint8_t action, |
| UNUSED_ATTR tBTA_DM_BLE_PF_FILT_INDEX filt_index, |
| UNUSED_ATTR tBTA_DM_BLE_PF_FILT_PARAMS* p_filt_params, |
| UNUSED_ATTR tBLE_BD_ADDR* p_target, |
| UNUSED_ATTR tBTA_DM_BLE_PF_PARAM_CBACK* p_cmpl_cback, |
| UNUSED_ATTR tBTA_DM_BLE_REF_VALUE ref_value) |
| } |
| #endif |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleGetEnergyInfo |
| * |
| * Description This function is called to obtain the energy info |
| * |
| * Parameters p_cmpl_cback - Command complete callback |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmBleGetEnergyInfo(tBTA_BLE_ENERGY_INFO_CBACK* p_cmpl_cback) { |
| const size_t len = sizeof(tBTA_DM_API_ENERGY_INFO) + sizeof(tBLE_BD_ADDR); |
| tBTA_DM_API_ENERGY_INFO* p_msg = (tBTA_DM_API_ENERGY_INFO*)osi_calloc(len); |
| |
| APPL_TRACE_API("%s", __func__); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_ENERGY_INFO_EVT; |
| p_msg->p_energy_info_cback = p_cmpl_cback; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmEnableScanFilter |
| * |
| * Description This function is called to enable the adv data payload |
| * filter |
| * |
| * Parameters action - enable or disable the APCF feature |
| * p_cmpl_cback - Command completed callback |
| * ref_value - Reference value |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| #if (BLE_ANDROID_CONTROLLER_SCAN_FILTER == TRUE) |
| void BTA_DmEnableScanFilter(uint8_t action, |
| tBTA_DM_BLE_PF_STATUS_CBACK* p_cmpl_cback, |
| tBTA_DM_BLE_REF_VALUE ref_value) { |
| const size_t len = |
| sizeof(tBTA_DM_API_ENABLE_SCAN_FILTER) + sizeof(tBLE_BD_ADDR); |
| tBTA_DM_API_ENABLE_SCAN_FILTER* p_msg = |
| (tBTA_DM_API_ENABLE_SCAN_FILTER*)osi_calloc(len); |
| |
| APPL_TRACE_API("%s: %d", __func__, action); |
| |
| p_msg->hdr.event = BTA_DM_API_SCAN_FILTER_ENABLE_EVT; |
| p_msg->action = action; |
| p_msg->ref_value = ref_value; |
| p_msg->p_filt_status_cback = p_cmpl_cback; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| #else |
| void BTA_DmEnableScanFilter( |
| UNUSED_ATTR uint8_t action, |
| UNUSED_ATTR tBTA_DM_BLE_PF_STATUS_CBACK* p_cmpl_cback, |
| UNUSED_ATTR tBTA_DM_BLE_REF_VALUE ref_value) {} |
| #endif |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleUpdateConnectionParams |
| * |
| * Description Update connection parameters, can only be used when |
| * connection is up. |
| * |
| * Parameters: bd_addr - BD address of the peer |
| * min_int - minimum connection interval, |
| * [0x0004 ~ 0x4000] |
| * max_int - maximum connection interval, |
| * [0x0004 ~ 0x4000] |
| * latency - slave latency [0 ~ 500] |
| * timeout - supervision timeout [0x000a ~ 0xc80] |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmBleUpdateConnectionParams(const BD_ADDR bd_addr, uint16_t min_int, |
| uint16_t max_int, uint16_t latency, |
| uint16_t timeout) { |
| tBTA_DM_API_UPDATE_CONN_PARAM* p_msg = |
| (tBTA_DM_API_UPDATE_CONN_PARAM*)osi_calloc( |
| sizeof(tBTA_DM_API_UPDATE_CONN_PARAM)); |
| |
| p_msg->hdr.event = BTA_DM_API_UPDATE_CONN_PARAM_EVT; |
| bdcpy(p_msg->bd_addr, bd_addr); |
| p_msg->min_int = min_int; |
| p_msg->max_int = max_int; |
| p_msg->latency = latency; |
| p_msg->timeout = timeout; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleSetDataLength |
| * |
| * Description This function is to set maximum LE data packet size |
| * |
| * Returns void |
| * |
| * |
| ******************************************************************************/ |
| void BTA_DmBleSetDataLength(BD_ADDR remote_device, uint16_t tx_data_length) { |
| tBTA_DM_API_BLE_SET_DATA_LENGTH* p_msg = |
| (tBTA_DM_API_BLE_SET_DATA_LENGTH*)osi_malloc( |
| sizeof(tBTA_DM_API_BLE_SET_DATA_LENGTH)); |
| |
| bdcpy(p_msg->remote_bda, remote_device); |
| p_msg->hdr.event = BTA_DM_API_SET_DATA_LENGTH_EVT; |
| p_msg->tx_data_length = tx_data_length; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmSetEncryption |
| * |
| * Description This function is called to ensure that connection is |
| * encrypted. Should be called only on an open connection. |
| * Typically only needed for connections that first want to |
| * bring up unencrypted links, then later encrypt them. |
| * |
| * Parameters: bd_addr - Address of the peer device |
| * transport - transport of the link to be encruypted |
| * p_callback - Pointer to callback function to indicat the |
| * link encryption status |
| * sec_act - This is the security action to indicate |
| * what kind of BLE security level is required |
| * for the BLE link if BLE is supported. |
| * Note: This parameter is ignored for the |
| * BR/EDR or if BLE is not supported. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmSetEncryption(BD_ADDR bd_addr, tBTA_TRANSPORT transport, |
| tBTA_DM_ENCRYPT_CBACK* p_callback, |
| tBTA_DM_BLE_SEC_ACT sec_act) { |
| tBTA_DM_API_SET_ENCRYPTION* p_msg = (tBTA_DM_API_SET_ENCRYPTION*)osi_calloc( |
| sizeof(tBTA_DM_API_SET_ENCRYPTION)); |
| |
| APPL_TRACE_API("%s", __func__); |
| |
| p_msg->hdr.event = BTA_DM_API_SET_ENCRYPTION_EVT; |
| memcpy(p_msg->bd_addr, bd_addr, BD_ADDR_LEN); |
| p_msg->transport = transport; |
| p_msg->p_callback = p_callback; |
| p_msg->sec_act = sec_act; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmCloseACL |
| * |
| * Description This function force to close an ACL connection and remove |
| * the device from the security database list of known devices. |
| * |
| * Parameters: bd_addr - Address of the peer device |
| * remove_dev - remove device or not after link down |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_DmCloseACL(BD_ADDR bd_addr, bool remove_dev, |
| tBTA_TRANSPORT transport) { |
| tBTA_DM_API_REMOVE_ACL* p_msg = |
| (tBTA_DM_API_REMOVE_ACL*)osi_calloc(sizeof(tBTA_DM_API_REMOVE_ACL)); |
| |
| APPL_TRACE_API("%s", __func__); |
| |
| p_msg->hdr.event = BTA_DM_API_REMOVE_ACL_EVT; |
| memcpy(p_msg->bd_addr, bd_addr, BD_ADDR_LEN); |
| p_msg->remove_dev = remove_dev; |
| p_msg->transport = transport; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_DmBleObserve |
| * |
| * Description This procedure keep the device listening for advertising |
| * events from a broadcast device. |
| * |
| * Parameters start: start or stop observe. |
| * |
| * Returns void |
| |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void BTA_DmBleObserve(bool start, uint8_t duration, |
| tBTA_DM_SEARCH_CBACK* p_results_cb) { |
| tBTA_DM_API_BLE_OBSERVE* p_msg = |
| (tBTA_DM_API_BLE_OBSERVE*)osi_calloc(sizeof(tBTA_DM_API_BLE_OBSERVE)); |
| |
| APPL_TRACE_API("%s:start = %d ", __func__, start); |
| |
| p_msg->hdr.event = BTA_DM_API_BLE_OBSERVE_EVT; |
| p_msg->start = start; |
| p_msg->duration = duration; |
| p_msg->p_cback = p_results_cb; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_VendorInit |
| * |
| * Description This function initializes vendor specific |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_VendorInit(void) { APPL_TRACE_API("BTA_VendorInit"); } |
| |
| /******************************************************************************* |
| * |
| * Function BTA_VendorCleanup |
| * |
| * Description This function frees up Broadcom specific VS specific dynamic |
| * memory |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTA_VendorCleanup(void) { |
| tBTM_BLE_VSC_CB cmn_ble_vsc_cb; |
| BTM_BleGetVendorCapabilities(&cmn_ble_vsc_cb); |
| |
| #if (BLE_ANDROID_CONTROLLER_SCAN_FILTER == TRUE) |
| if (cmn_ble_vsc_cb.max_filter > 0) { |
| btm_ble_adv_filter_cleanup(); |
| #if (BLE_PRIVACY_SPT == TRUE) |
| btm_ble_resolving_list_cleanup(); |
| #endif |
| } |
| |
| if (cmn_ble_vsc_cb.tot_scan_results_strg > 0) btm_ble_batchscan_cleanup(); |
| #endif |
| |
| if (cmn_ble_vsc_cb.adv_inst_max > 0) btm_ble_multi_adv_cleanup(); |
| } |