| /****************************************************************************** |
| * |
| * Copyright (C) 2003-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This is the main implementation file for the BTA system manager. |
| * |
| ******************************************************************************/ |
| |
| #define LOG_TAG "bt_bta_sys_main" |
| |
| #include <assert.h> |
| #include <pthread.h> |
| #include <string.h> |
| |
| #include "bt_common.h" |
| #include "bta_api.h" |
| #include "bta_closure_int.h" |
| #include "bta_sys.h" |
| #include "bta_sys_int.h" |
| #include "btm_api.h" |
| #include "osi/include/alarm.h" |
| #include "osi/include/fixed_queue.h" |
| #include "osi/include/log.h" |
| #include "osi/include/osi.h" |
| #include "osi/include/thread.h" |
| #include "utl.h" |
| |
| #if (defined BTA_AR_INCLUDED) && (BTA_AR_INCLUDED == true) |
| #include "bta_ar_api.h" |
| #endif |
| |
| /* system manager control block definition */ |
| tBTA_SYS_CB bta_sys_cb; |
| |
| fixed_queue_t* btu_bta_alarm_queue; |
| extern thread_t* bt_workqueue_thread; |
| |
| /* trace level */ |
| /* TODO Hard-coded trace levels - Needs to be configurable */ |
| uint8_t appl_trace_level = BT_TRACE_LEVEL_WARNING; // APPL_INITIAL_TRACE_LEVEL; |
| uint8_t btif_trace_level = BT_TRACE_LEVEL_WARNING; |
| |
| // Communication queue between btu_task and bta. |
| extern fixed_queue_t* btu_bta_msg_queue; |
| |
| static const tBTA_SYS_REG bta_sys_hw_reg = {bta_sys_sm_execute, NULL}; |
| |
| /* type for action functions */ |
| typedef void (*tBTA_SYS_ACTION)(tBTA_SYS_HW_MSG* p_data); |
| |
| /* action function list */ |
| const tBTA_SYS_ACTION bta_sys_action[] = { |
| /* device manager local device API events - cf bta_sys.h for events */ |
| bta_sys_hw_api_enable, /* 0 BTA_SYS_HW_API_ENABLE_EVT */ |
| bta_sys_hw_evt_enabled, /* 1 BTA_SYS_HW_EVT_ENABLED_EVT */ |
| bta_sys_hw_evt_stack_enabled, /* 2 BTA_SYS_HW_EVT_STACK_ENABLED_EVT */ |
| bta_sys_hw_api_disable, /* 3 BTA_SYS_HW_API_DISABLE_EVT */ |
| bta_sys_hw_evt_disabled, /* 4 BTA_SYS_HW_EVT_DISABLED_EVT */ |
| bta_sys_hw_error /* 5 BTA_SYS_HW_ERROR_EVT */ |
| }; |
| |
| /* state machine action enumeration list */ |
| enum { |
| /* device manager local device API events */ |
| BTA_SYS_HW_API_ENABLE, |
| BTA_SYS_HW_EVT_ENABLED, |
| BTA_SYS_HW_EVT_STACK_ENABLED, |
| BTA_SYS_HW_API_DISABLE, |
| BTA_SYS_HW_EVT_DISABLED, |
| BTA_SYS_HW_ERROR |
| }; |
| |
| #define BTA_SYS_NUM_ACTIONS (BTA_SYS_MAX_EVT & 0x00ff) |
| #define BTA_SYS_IGNORE BTA_SYS_NUM_ACTIONS |
| |
| /* state table information */ |
| #define BTA_SYS_ACTIONS 2 /* number of actions */ |
| #define BTA_SYS_NEXT_STATE 2 /* position of next state */ |
| #define BTA_SYS_NUM_COLS 3 /* number of columns in state tables */ |
| |
| /* state table for OFF state */ |
| const uint8_t bta_sys_hw_off[][BTA_SYS_NUM_COLS] = { |
| /* Event Action 1 Action 2 |
| Next State */ |
| /* API_ENABLE */ {BTA_SYS_HW_API_ENABLE, BTA_SYS_IGNORE, |
| BTA_SYS_HW_STARTING}, |
| /* EVT_ENABLED */ {BTA_SYS_IGNORE, BTA_SYS_IGNORE, BTA_SYS_HW_STARTING}, |
| /* STACK_ENABLED */ {BTA_SYS_IGNORE, BTA_SYS_IGNORE, BTA_SYS_HW_ON}, |
| /* API_DISABLE */ {BTA_SYS_HW_EVT_DISABLED, BTA_SYS_IGNORE, |
| BTA_SYS_HW_OFF}, |
| /* EVT_DISABLED */ {BTA_SYS_IGNORE, BTA_SYS_IGNORE, BTA_SYS_HW_OFF}, |
| /* EVT_ERROR */ {BTA_SYS_IGNORE, BTA_SYS_IGNORE, BTA_SYS_HW_OFF}}; |
| |
| const uint8_t bta_sys_hw_starting[][BTA_SYS_NUM_COLS] = { |
| /* Event Action 1 Action 2 |
| Next State */ |
| /* API_ENABLE */ {BTA_SYS_IGNORE, BTA_SYS_IGNORE, |
| BTA_SYS_HW_STARTING}, /* wait for completion event */ |
| /* EVT_ENABLED */ {BTA_SYS_HW_EVT_ENABLED, BTA_SYS_IGNORE, |
| BTA_SYS_HW_STARTING}, |
| /* STACK_ENABLED */ {BTA_SYS_HW_EVT_STACK_ENABLED, BTA_SYS_IGNORE, |
| BTA_SYS_HW_ON}, |
| /* API_DISABLE */ {BTA_SYS_IGNORE, BTA_SYS_IGNORE, |
| BTA_SYS_HW_STOPPING}, /* successive disable/enable: |
| change state wait for |
| completion to disable */ |
| /* EVT_DISABLED */ {BTA_SYS_HW_EVT_DISABLED, BTA_SYS_HW_API_ENABLE, |
| BTA_SYS_HW_STARTING}, /* successive enable/disable: |
| notify, then restart HW */ |
| /* EVT_ERROR */ {BTA_SYS_HW_ERROR, BTA_SYS_IGNORE, BTA_SYS_HW_ON}}; |
| |
| const uint8_t bta_sys_hw_on[][BTA_SYS_NUM_COLS] = { |
| /* Event Action 1 Action 2 |
| Next State */ |
| /* API_ENABLE */ {BTA_SYS_HW_API_ENABLE, BTA_SYS_IGNORE, BTA_SYS_HW_ON}, |
| /* EVT_ENABLED */ {BTA_SYS_IGNORE, BTA_SYS_IGNORE, BTA_SYS_HW_ON}, |
| /* STACK_ENABLED */ {BTA_SYS_IGNORE, BTA_SYS_IGNORE, BTA_SYS_HW_ON}, |
| /* API_DISABLE */ |
| {BTA_SYS_HW_API_DISABLE, BTA_SYS_IGNORE, |
| BTA_SYS_HW_ON}, /* don't change the state here, as some |
| other modules might be active */ |
| /* EVT_DISABLED */ {BTA_SYS_HW_ERROR, BTA_SYS_IGNORE, BTA_SYS_HW_ON}, |
| /* EVT_ERROR */ {BTA_SYS_HW_ERROR, BTA_SYS_IGNORE, BTA_SYS_HW_ON}}; |
| |
| const uint8_t bta_sys_hw_stopping[][BTA_SYS_NUM_COLS] = { |
| /* Event Action 1 Action 2 |
| Next State */ |
| /* API_ENABLE */ {BTA_SYS_IGNORE, BTA_SYS_IGNORE, |
| BTA_SYS_HW_STARTING}, /* change state, and wait for |
| completion event to enable */ |
| /* EVT_ENABLED */ {BTA_SYS_HW_EVT_ENABLED, BTA_SYS_IGNORE, |
| BTA_SYS_HW_STOPPING}, /* successive enable/disable: |
| finish the enable before |
| disabling */ |
| /* STACK_ENABLED */ {BTA_SYS_HW_EVT_STACK_ENABLED, BTA_SYS_HW_API_DISABLE, |
| BTA_SYS_HW_STOPPING}, /* successive enable/disable: |
| notify, then stop */ |
| /* API_DISABLE */ {BTA_SYS_IGNORE, BTA_SYS_IGNORE, |
| BTA_SYS_HW_STOPPING}, /* wait for completion event */ |
| /* EVT_DISABLED */ {BTA_SYS_HW_EVT_DISABLED, BTA_SYS_IGNORE, |
| BTA_SYS_HW_OFF}, |
| /* EVT_ERROR */ {BTA_SYS_HW_API_DISABLE, BTA_SYS_IGNORE, |
| BTA_SYS_HW_STOPPING}}; |
| |
| typedef const uint8_t (*tBTA_SYS_ST_TBL)[BTA_SYS_NUM_COLS]; |
| |
| /* state table */ |
| const tBTA_SYS_ST_TBL bta_sys_st_tbl[] = {bta_sys_hw_off, bta_sys_hw_starting, |
| bta_sys_hw_on, bta_sys_hw_stopping}; |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_init |
| * |
| * Description BTA initialization; called from task initialization. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_sys_init(void) { |
| memset(&bta_sys_cb, 0, sizeof(tBTA_SYS_CB)); |
| |
| btu_bta_alarm_queue = fixed_queue_new(SIZE_MAX); |
| |
| alarm_register_processing_queue(btu_bta_alarm_queue, bt_workqueue_thread); |
| |
| appl_trace_level = APPL_INITIAL_TRACE_LEVEL; |
| |
| /* register BTA SYS message handler */ |
| bta_sys_register(BTA_ID_SYS, &bta_sys_hw_reg); |
| |
| /* register for BTM notifications */ |
| BTM_RegisterForDeviceStatusNotif((tBTM_DEV_STATUS_CB*)&bta_sys_hw_btm_cback); |
| |
| #if (defined BTA_AR_INCLUDED) && (BTA_AR_INCLUDED == true) |
| bta_ar_init(); |
| #endif |
| |
| bta_closure_init(bta_sys_register, bta_sys_sendmsg); |
| } |
| |
| void bta_sys_free(void) { |
| alarm_unregister_processing_queue(btu_bta_alarm_queue); |
| fixed_queue_free(btu_bta_alarm_queue, NULL); |
| btu_bta_alarm_queue = NULL; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_sm_execute |
| * |
| * Description State machine event handling function for DM |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| bool bta_sys_sm_execute(BT_HDR* p_msg) { |
| bool freebuf = true; |
| tBTA_SYS_ST_TBL state_table; |
| uint8_t action; |
| int i; |
| |
| APPL_TRACE_EVENT("bta_sys_sm_execute state:%d, event:0x%x", bta_sys_cb.state, |
| p_msg->event); |
| |
| /* look up the state table for the current state */ |
| state_table = bta_sys_st_tbl[bta_sys_cb.state]; |
| /* update state */ |
| bta_sys_cb.state = state_table[p_msg->event & 0x00ff][BTA_SYS_NEXT_STATE]; |
| |
| /* execute action functions */ |
| for (i = 0; i < BTA_SYS_ACTIONS; i++) { |
| action = state_table[p_msg->event & 0x00ff][i]; |
| if (action != BTA_SYS_IGNORE) { |
| (*bta_sys_action[action])((tBTA_SYS_HW_MSG*)p_msg); |
| } else { |
| break; |
| } |
| } |
| return freebuf; |
| } |
| |
| void bta_sys_hw_register(tBTA_SYS_HW_MODULE module, tBTA_SYS_HW_CBACK* cback) { |
| bta_sys_cb.sys_hw_cback[module] = cback; |
| } |
| |
| void bta_sys_hw_unregister(tBTA_SYS_HW_MODULE module) { |
| bta_sys_cb.sys_hw_cback[module] = NULL; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_hw_btm_cback |
| * |
| * Description This function is registered by BTA SYS to BTM in order to get |
| * status notifications |
| * |
| * |
| * Returns |
| * |
| ******************************************************************************/ |
| void bta_sys_hw_btm_cback(tBTM_DEV_STATUS status) { |
| tBTA_SYS_HW_MSG* sys_event = |
| (tBTA_SYS_HW_MSG*)osi_malloc(sizeof(tBTA_SYS_HW_MSG)); |
| |
| APPL_TRACE_DEBUG("%s was called with parameter: %i", __func__, status); |
| |
| /* send a message to BTA SYS */ |
| if (status == BTM_DEV_STATUS_UP) { |
| sys_event->hdr.event = BTA_SYS_EVT_STACK_ENABLED_EVT; |
| } else if (status == BTM_DEV_STATUS_DOWN) { |
| sys_event->hdr.event = BTA_SYS_ERROR_EVT; |
| } else { |
| /* BTM_DEV_STATUS_CMD_TOUT is ignored for now. */ |
| osi_free_and_reset((void**)&sys_event); |
| } |
| |
| if (sys_event) bta_sys_sendmsg(sys_event); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_hw_error |
| * |
| * Description In case the HW device stops answering... Try to turn it off, |
| * then re-enable all |
| * previously active SW modules. |
| * |
| * Returns success or failure |
| * |
| ******************************************************************************/ |
| void bta_sys_hw_error(UNUSED_ATTR tBTA_SYS_HW_MSG* p_sys_hw_msg) { |
| uint8_t module_index; |
| |
| APPL_TRACE_DEBUG("%s", __func__); |
| |
| for (module_index = 0; module_index < BTA_SYS_MAX_HW_MODULES; |
| module_index++) { |
| if (bta_sys_cb.sys_hw_module_active & ((uint32_t)1 << module_index)) { |
| switch (module_index) { |
| case BTA_SYS_HW_BLUETOOTH: |
| /* Send BTA_SYS_HW_ERROR_EVT to DM */ |
| if (bta_sys_cb.sys_hw_cback[module_index] != NULL) |
| bta_sys_cb.sys_hw_cback[module_index](BTA_SYS_HW_ERROR_EVT); |
| break; |
| default: |
| /* not yet supported */ |
| break; |
| } |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_hw_enable |
| * |
| * Description this function is called after API enable and HW has been |
| * turned on |
| * |
| * |
| * Returns success or failure |
| * |
| ******************************************************************************/ |
| |
| void bta_sys_hw_api_enable(tBTA_SYS_HW_MSG* p_sys_hw_msg) { |
| if ((!bta_sys_cb.sys_hw_module_active) && |
| (bta_sys_cb.state != BTA_SYS_HW_ON)) { |
| /* register which HW module was turned on */ |
| bta_sys_cb.sys_hw_module_active |= ((uint32_t)1 << p_sys_hw_msg->hw_module); |
| |
| tBTA_SYS_HW_MSG* p_msg = |
| (tBTA_SYS_HW_MSG*)osi_malloc(sizeof(tBTA_SYS_HW_MSG)); |
| p_msg->hdr.event = BTA_SYS_EVT_ENABLED_EVT; |
| p_msg->hw_module = p_sys_hw_msg->hw_module; |
| |
| bta_sys_sendmsg(p_msg); |
| } else { |
| /* register which HW module was turned on */ |
| bta_sys_cb.sys_hw_module_active |= ((uint32_t)1 << p_sys_hw_msg->hw_module); |
| |
| /* HW already in use, so directly notify the caller */ |
| if (bta_sys_cb.sys_hw_cback[p_sys_hw_msg->hw_module] != NULL) |
| bta_sys_cb.sys_hw_cback[p_sys_hw_msg->hw_module](BTA_SYS_HW_ON_EVT); |
| } |
| |
| APPL_TRACE_EVENT("bta_sys_hw_api_enable for %d, active modules 0x%04X", |
| p_sys_hw_msg->hw_module, bta_sys_cb.sys_hw_module_active); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_hw_disable |
| * |
| * Description if no other module is using the HW, this function will call |
| * (if defined) a user-macro to turn off the HW |
| * |
| * |
| * Returns success or failure |
| * |
| ******************************************************************************/ |
| void bta_sys_hw_api_disable(tBTA_SYS_HW_MSG* p_sys_hw_msg) { |
| APPL_TRACE_DEBUG("bta_sys_hw_api_disable for %d, active modules: 0x%04X", |
| p_sys_hw_msg->hw_module, bta_sys_cb.sys_hw_module_active); |
| |
| /* make sure the related SW blocks were stopped */ |
| bta_sys_disable(p_sys_hw_msg->hw_module); |
| |
| /* register which module we turn off */ |
| bta_sys_cb.sys_hw_module_active &= ~((uint32_t)1 << p_sys_hw_msg->hw_module); |
| |
| /* if there are still some SW modules using the HW, just provide an answer to |
| * the calling */ |
| if (bta_sys_cb.sys_hw_module_active != 0) { |
| /* if there are still some SW modules using the HW, directly notify the |
| * caller */ |
| if (bta_sys_cb.sys_hw_cback[p_sys_hw_msg->hw_module] != NULL) |
| bta_sys_cb.sys_hw_cback[p_sys_hw_msg->hw_module](BTA_SYS_HW_OFF_EVT); |
| } else { |
| /* manually update the state of our system */ |
| bta_sys_cb.state = BTA_SYS_HW_STOPPING; |
| |
| tBTA_SYS_HW_MSG* p_msg = |
| (tBTA_SYS_HW_MSG*)osi_malloc(sizeof(tBTA_SYS_HW_MSG)); |
| p_msg->hdr.event = BTA_SYS_EVT_DISABLED_EVT; |
| p_msg->hw_module = p_sys_hw_msg->hw_module; |
| |
| bta_sys_sendmsg(p_msg); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_hw_event_enabled |
| * |
| * Description |
| * |
| * |
| * Returns success or failure |
| * |
| ******************************************************************************/ |
| void bta_sys_hw_evt_enabled(tBTA_SYS_HW_MSG* p_sys_hw_msg) { |
| APPL_TRACE_EVENT("bta_sys_hw_evt_enabled for %i", p_sys_hw_msg->hw_module); |
| BTM_DeviceReset(NULL); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_hw_event_disabled |
| * |
| * Description |
| * |
| * |
| * Returns success or failure |
| * |
| ******************************************************************************/ |
| void bta_sys_hw_evt_disabled(tBTA_SYS_HW_MSG* p_sys_hw_msg) { |
| uint8_t hw_module_index; |
| |
| APPL_TRACE_DEBUG("bta_sys_hw_evt_disabled - module 0x%X", |
| p_sys_hw_msg->hw_module); |
| |
| for (hw_module_index = 0; hw_module_index < BTA_SYS_MAX_HW_MODULES; |
| hw_module_index++) { |
| if (bta_sys_cb.sys_hw_cback[hw_module_index] != NULL) |
| bta_sys_cb.sys_hw_cback[hw_module_index](BTA_SYS_HW_OFF_EVT); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_hw_event_stack_enabled |
| * |
| * Description we receive this event once the SW side is ready (stack, FW |
| * download,... ), i.e. we can really start using the device. So |
| * notify the app. |
| * |
| * Returns success or failure |
| * |
| ******************************************************************************/ |
| void bta_sys_hw_evt_stack_enabled(UNUSED_ATTR tBTA_SYS_HW_MSG* p_sys_hw_msg) { |
| uint8_t hw_module_index; |
| |
| APPL_TRACE_DEBUG(" bta_sys_hw_evt_stack_enabled!notify the callers"); |
| |
| for (hw_module_index = 0; hw_module_index < BTA_SYS_MAX_HW_MODULES; |
| hw_module_index++) { |
| if (bta_sys_cb.sys_hw_cback[hw_module_index] != NULL) |
| bta_sys_cb.sys_hw_cback[hw_module_index](BTA_SYS_HW_ON_EVT); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_event |
| * |
| * Description BTA event handler; called from task event handler. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_sys_event(BT_HDR* p_msg) { |
| uint8_t id; |
| bool freebuf = true; |
| |
| APPL_TRACE_EVENT("BTA got event 0x%x", p_msg->event); |
| |
| /* get subsystem id from event */ |
| id = (uint8_t)(p_msg->event >> 8); |
| |
| /* verify id and call subsystem event handler */ |
| if ((id < BTA_ID_MAX) && (bta_sys_cb.reg[id] != NULL)) { |
| freebuf = (*bta_sys_cb.reg[id]->evt_hdlr)(p_msg); |
| } else { |
| APPL_TRACE_WARNING("BTA got unregistered event id %d", id); |
| } |
| |
| if (freebuf) { |
| osi_free(p_msg); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_register |
| * |
| * Description Called by other BTA subsystems to register their event |
| * handler. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_sys_register(uint8_t id, const tBTA_SYS_REG* p_reg) { |
| bta_sys_cb.reg[id] = (tBTA_SYS_REG*)p_reg; |
| bta_sys_cb.is_reg[id] = true; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_deregister |
| * |
| * Description Called by other BTA subsystems to de-register |
| * handler. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_sys_deregister(uint8_t id) { bta_sys_cb.is_reg[id] = false; } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_is_register |
| * |
| * Description Called by other BTA subsystems to get registeration |
| * status. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| bool bta_sys_is_register(uint8_t id) { return bta_sys_cb.is_reg[id]; } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_sendmsg |
| * |
| * Description Send a GKI message to BTA. This function is designed to |
| * optimize sending of messages to BTA. It is called by BTA |
| * API functions and call-in functions. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_sys_sendmsg(void* p_msg) { |
| // There is a race condition that occurs if the stack is shut down while |
| // there is a procedure in progress that can schedule a task via this |
| // message queue. This causes |btu_bta_msg_queue| to get cleaned up before |
| // it gets used here; hence we check for NULL before using it. |
| if (btu_bta_msg_queue) fixed_queue_enqueue(btu_bta_msg_queue, p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_start_timer |
| * |
| * Description Start a protocol timer for the specified amount |
| * of time in milliseconds. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_sys_start_timer(alarm_t* alarm, period_ms_t interval, uint16_t event, |
| uint16_t layer_specific) { |
| BT_HDR* p_buf = (BT_HDR*)osi_malloc(sizeof(BT_HDR)); |
| |
| p_buf->event = event; |
| p_buf->layer_specific = layer_specific; |
| alarm_set_on_queue(alarm, interval, bta_sys_sendmsg, p_buf, |
| btu_bta_alarm_queue); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_disable |
| * |
| * Description For each registered subsystem execute its disable function. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_sys_disable(tBTA_SYS_HW_MODULE module) { |
| int bta_id = 0; |
| int bta_id_max = 0; |
| |
| APPL_TRACE_DEBUG("bta_sys_disable: module %i", module); |
| |
| switch (module) { |
| case BTA_SYS_HW_BLUETOOTH: |
| bta_id = BTA_ID_DM; |
| bta_id_max = BTA_ID_BLUETOOTH_MAX; |
| break; |
| default: |
| APPL_TRACE_WARNING("bta_sys_disable: unkown module"); |
| return; |
| } |
| |
| for (; bta_id <= bta_id_max; bta_id++) { |
| if (bta_sys_cb.reg[bta_id] != NULL) { |
| if (bta_sys_cb.is_reg[bta_id] == true && |
| bta_sys_cb.reg[bta_id]->disable != NULL) { |
| (*bta_sys_cb.reg[bta_id]->disable)(); |
| } |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_set_trace_level |
| * |
| * Description Set trace level for BTA |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_sys_set_trace_level(uint8_t level) { appl_trace_level = level; } |
| |
| /******************************************************************************* |
| * |
| * Function bta_sys_get_sys_features |
| * |
| * Description Returns sys_features to other BTA modules. |
| * |
| * Returns sys_features |
| * |
| ******************************************************************************/ |
| uint16_t bta_sys_get_sys_features(void) { return bta_sys_cb.sys_features; } |