| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains the L2CAP API code |
| * |
| ******************************************************************************/ |
| |
| #define LOG_TAG "bt_l2cap" |
| |
| #include <assert.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| #include "bt_types.h" |
| #include "btm_api.h" |
| #include "btu.h" |
| #include "bt_common.h" |
| #include "hcidefs.h" |
| #include "hcimsgs.h" |
| #include "l2c_int.h" |
| #include "l2cdefs.h" |
| #include "osi/include/allocator.h" |
| #include "osi/include/log.h" |
| |
| |
| extern fixed_queue_t *btu_general_alarm_queue; |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_Register |
| ** |
| ** Description Other layers call this function to register for L2CAP |
| ** services. |
| ** |
| ** Returns PSM to use or zero if error. Typically, the PSM returned |
| ** is the same as was passed in, but for an outgoing-only |
| ** connection to a dynamic PSM, a "virtual" PSM is returned |
| ** and should be used in the calls to L2CA_ConnectReq(), |
| ** L2CA_ErtmConnectReq() and L2CA_Deregister() |
| ** |
| *******************************************************************************/ |
| uint16_t L2CA_Register (uint16_t psm, tL2CAP_APPL_INFO *p_cb_info) |
| { |
| tL2C_RCB *p_rcb; |
| uint16_t vpsm = psm; |
| |
| L2CAP_TRACE_API ("L2CAP - L2CA_Register() called for PSM: 0x%04x", psm); |
| |
| /* Verify that the required callback info has been filled in |
| ** Note: Connection callbacks are required but not checked |
| ** for here because it is possible to be only a client |
| ** or only a server. |
| */ |
| if ((!p_cb_info->pL2CA_ConfigCfm_Cb) |
| || (!p_cb_info->pL2CA_ConfigInd_Cb) |
| || (!p_cb_info->pL2CA_DataInd_Cb) |
| || (!p_cb_info->pL2CA_DisconnectInd_Cb)) |
| { |
| L2CAP_TRACE_ERROR ("L2CAP - no cb registering PSM: 0x%04x", psm); |
| return (0); |
| } |
| |
| /* Verify PSM is valid */ |
| if (L2C_INVALID_PSM(psm)) |
| { |
| L2CAP_TRACE_ERROR ("L2CAP - invalid PSM value, PSM: 0x%04x", psm); |
| return (0); |
| } |
| |
| /* Check if this is a registration for an outgoing-only connection to */ |
| /* a dynamic PSM. If so, allocate a "virtual" PSM for the app to use. */ |
| if ( (psm >= 0x1001) && (p_cb_info->pL2CA_ConnectInd_Cb == NULL) ) |
| { |
| for (vpsm = 0x1002; vpsm < 0x8000; vpsm += 2) |
| { |
| p_rcb = l2cu_find_rcb_by_psm(vpsm); |
| if (p_rcb == NULL) |
| break; |
| } |
| |
| L2CAP_TRACE_API ("L2CA_Register - Real PSM: 0x%04x Virtual PSM: 0x%04x", psm, vpsm); |
| } |
| |
| /* If registration block already there, just overwrite it */ |
| p_rcb = l2cu_find_rcb_by_psm(vpsm); |
| if (p_rcb == NULL) |
| { |
| p_rcb = l2cu_allocate_rcb(vpsm); |
| if (p_rcb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no RCB available, PSM: 0x%04x vPSM: 0x%04x", psm, vpsm); |
| return (0); |
| } |
| } |
| |
| p_rcb->api = *p_cb_info; |
| p_rcb->real_psm = psm; |
| |
| return (vpsm); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_Deregister |
| ** |
| ** Description Other layers call this function to de-register for L2CAP |
| ** services. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void L2CA_Deregister (uint16_t psm) |
| { |
| tL2C_RCB *p_rcb; |
| tL2C_CCB *p_ccb; |
| tL2C_LCB *p_lcb; |
| int ii; |
| |
| L2CAP_TRACE_API ("L2CAP - L2CA_Deregister() called for PSM: 0x%04x", psm); |
| |
| p_rcb = l2cu_find_rcb_by_psm(psm); |
| if (p_rcb != NULL) |
| { |
| p_lcb = &l2cb.lcb_pool[0]; |
| for (ii = 0; ii < MAX_L2CAP_LINKS; ii++, p_lcb++) |
| { |
| if (p_lcb->in_use) |
| { |
| if (((p_ccb = p_lcb->ccb_queue.p_first_ccb) == NULL) |
| || (p_lcb->link_state == LST_DISCONNECTING)) |
| continue; |
| |
| if ((p_ccb->in_use) && |
| ((p_ccb->chnl_state == CST_W4_L2CAP_DISCONNECT_RSP) || |
| (p_ccb->chnl_state == CST_W4_L2CA_DISCONNECT_RSP))) |
| continue; |
| |
| if (p_ccb->p_rcb == p_rcb) |
| l2c_csm_execute (p_ccb, L2CEVT_L2CA_DISCONNECT_REQ, NULL); |
| } |
| } |
| l2cu_release_rcb (p_rcb); |
| } |
| else |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - PSM: 0x%04x not found for deregistration", psm); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_AllocatePSM |
| ** |
| ** Description Other layers call this function to find an unused PSM for L2CAP |
| ** services. |
| ** |
| ** Returns PSM to use. |
| ** |
| *******************************************************************************/ |
| uint16_t L2CA_AllocatePSM(void) |
| { |
| bool done = false; |
| uint16_t psm = l2cb.dyn_psm; |
| |
| L2CAP_TRACE_API( "L2CA_AllocatePSM"); |
| while (!done) |
| { |
| psm += 2; |
| if (psm > 0xfeff) |
| { |
| psm = 0x1001; |
| } |
| else if (psm & 0x0100) |
| { |
| /* the upper byte must be even */ |
| psm += 0x0100; |
| } |
| |
| /* if psm is in range of reserved BRCM Aware features */ |
| if ((BRCM_RESERVED_PSM_START <= psm)&&(psm <= BRCM_RESERVED_PSM_END)) |
| continue; |
| |
| /* make sure the newlly allocated psm is not used right now */ |
| if ((l2cu_find_rcb_by_psm (psm)) == NULL) |
| done = true; |
| } |
| l2cb.dyn_psm = psm; |
| |
| return(psm); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_ConnectReq |
| ** |
| ** Description Higher layers call this function to create an L2CAP connection. |
| ** Note that the connection is not established at this time, but |
| ** connection establishment gets started. The callback function |
| ** will be invoked when connection establishes or fails. |
| ** |
| ** Returns the CID of the connection, or 0 if it failed to start |
| ** |
| *******************************************************************************/ |
| uint16_t L2CA_ConnectReq (uint16_t psm, BD_ADDR p_bd_addr) |
| { |
| return L2CA_ErtmConnectReq (psm, p_bd_addr, NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_ErtmConnectReq |
| ** |
| ** Description Higher layers call this function to create an L2CAP connection. |
| ** Note that the connection is not established at this time, but |
| ** connection establishment gets started. The callback function |
| ** will be invoked when connection establishes or fails. |
| ** |
| ** Parameters: PSM: L2CAP PSM for the connection |
| ** BD address of the peer |
| ** Enhaced retransmission mode configurations |
| |
| ** Returns the CID of the connection, or 0 if it failed to start |
| ** |
| *******************************************************************************/ |
| uint16_t L2CA_ErtmConnectReq (uint16_t psm, BD_ADDR p_bd_addr, tL2CAP_ERTM_INFO *p_ertm_info) |
| { |
| tL2C_LCB *p_lcb; |
| tL2C_CCB *p_ccb; |
| tL2C_RCB *p_rcb; |
| |
| L2CAP_TRACE_API ("L2CA_ErtmConnectReq() PSM: 0x%04x BDA: %08x%04x p_ertm_info: 0x%08x allowed:0x%x preferred:%d", psm, |
| (p_bd_addr[0]<<24)+(p_bd_addr[1]<<16)+(p_bd_addr[2]<<8)+p_bd_addr[3], |
| (p_bd_addr[4]<<8)+p_bd_addr[5], p_ertm_info, |
| (p_ertm_info) ? p_ertm_info->allowed_modes : 0, |
| (p_ertm_info) ? p_ertm_info->preferred_mode : 0); |
| |
| /* Fail if we have not established communications with the controller */ |
| if (!BTM_IsDeviceUp()) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP connect req - BTU not ready"); |
| return (0); |
| } |
| /* Fail if the PSM is not registered */ |
| p_rcb = l2cu_find_rcb_by_psm(psm); |
| if (p_rcb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no RCB for L2CA_conn_req, PSM: 0x%04x", psm); |
| return (0); |
| } |
| |
| /* First, see if we already have a link to the remote */ |
| /* assume all ERTM l2cap connection is going over BR/EDR for now */ |
| p_lcb = l2cu_find_lcb_by_bd_addr(p_bd_addr, BT_TRANSPORT_BR_EDR); |
| if (p_lcb == NULL) |
| { |
| /* No link. Get an LCB and start link establishment */ |
| if ( ((p_lcb = l2cu_allocate_lcb (p_bd_addr, false, BT_TRANSPORT_BR_EDR)) == NULL) |
| /* currently use BR/EDR for ERTM mode l2cap connection */ |
| || (l2cu_create_conn(p_lcb, BT_TRANSPORT_BR_EDR) == false) ) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - conn not started for PSM: 0x%04x p_lcb: 0x%08x", psm, p_lcb); |
| return (0); |
| } |
| } |
| |
| /* Allocate a channel control block */ |
| p_ccb = l2cu_allocate_ccb(p_lcb, 0); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_conn_req, PSM: 0x%04x", psm); |
| return (0); |
| } |
| |
| /* Save registration info */ |
| p_ccb->p_rcb = p_rcb; |
| |
| if (p_ertm_info) |
| { |
| p_ccb->ertm_info = *p_ertm_info; |
| |
| /* Replace default indicators with the actual default pool */ |
| if (p_ccb->ertm_info.fcr_rx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE) |
| p_ccb->ertm_info.fcr_rx_buf_size = L2CAP_FCR_RX_BUF_SIZE; |
| |
| if (p_ccb->ertm_info.fcr_tx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE) |
| p_ccb->ertm_info.fcr_tx_buf_size = L2CAP_FCR_TX_BUF_SIZE; |
| |
| if (p_ccb->ertm_info.user_rx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE) |
| p_ccb->ertm_info.user_rx_buf_size = L2CAP_USER_RX_BUF_SIZE; |
| |
| if (p_ccb->ertm_info.user_tx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE) |
| p_ccb->ertm_info.user_tx_buf_size = L2CAP_USER_TX_BUF_SIZE; |
| |
| p_ccb->max_rx_mtu = p_ertm_info->user_rx_buf_size - |
| (L2CAP_MIN_OFFSET + L2CAP_SDU_LEN_OFFSET + L2CAP_FCS_LEN); |
| } |
| |
| /* If link is up, start the L2CAP connection */ |
| if (p_lcb->link_state == LST_CONNECTED) |
| { |
| l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONNECT_REQ, NULL); |
| } |
| |
| /* If link is disconnecting, save link info to retry after disconnect |
| * Possible Race condition when a reconnect occurs |
| * on the channel during a disconnect of link. This |
| * ccb will be automatically retried after link disconnect |
| * arrives |
| */ |
| else if (p_lcb->link_state == LST_DISCONNECTING) |
| { |
| L2CAP_TRACE_DEBUG ("L2CAP API - link disconnecting: RETRY LATER"); |
| |
| /* Save ccb so it can be started after disconnect is finished */ |
| p_lcb->p_pending_ccb = p_ccb; |
| } |
| |
| L2CAP_TRACE_API ("L2CAP - L2CA_conn_req(psm: 0x%04x) returned CID: 0x%04x", psm, p_ccb->local_cid); |
| |
| /* Return the local CID as our handle */ |
| return (p_ccb->local_cid); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_RegisterLECoc |
| ** |
| ** Description Other layers call this function to register for L2CAP |
| ** Connection Oriented Channel. |
| ** |
| ** Returns PSM to use or zero if error. Typically, the PSM returned |
| ** is the same as was passed in, but for an outgoing-only |
| ** connection to a dynamic PSM, a "virtual" PSM is returned |
| ** and should be used in the calls to L2CA_ConnectLECocReq() |
| ** and L2CA_DeregisterLECoc() |
| ** |
| *******************************************************************************/ |
| uint16_t L2CA_RegisterLECoc(uint16_t psm, tL2CAP_APPL_INFO *p_cb_info) |
| { |
| L2CAP_TRACE_API("%s called for LE PSM: 0x%04x", __func__, psm); |
| |
| /* Verify that the required callback info has been filled in |
| ** Note: Connection callbacks are required but not checked |
| ** for here because it is possible to be only a client |
| ** or only a server. |
| */ |
| if ((!p_cb_info->pL2CA_DataInd_Cb) |
| || (!p_cb_info->pL2CA_DisconnectInd_Cb)) |
| { |
| L2CAP_TRACE_ERROR("%s No cb registering BLE PSM: 0x%04x", __func__, psm); |
| return 0; |
| } |
| |
| /* Verify PSM is valid */ |
| if (!L2C_IS_VALID_LE_PSM(psm)) |
| { |
| L2CAP_TRACE_ERROR("%s Invalid BLE PSM value, PSM: 0x%04x", __func__, psm); |
| return 0; |
| } |
| |
| tL2C_RCB *p_rcb; |
| uint16_t vpsm = psm; |
| |
| /* Check if this is a registration for an outgoing-only connection to */ |
| /* a dynamic PSM. If so, allocate a "virtual" PSM for the app to use. */ |
| if ((psm >= 0x0080) && (p_cb_info->pL2CA_ConnectInd_Cb == NULL)) |
| { |
| for (vpsm = 0x0080; vpsm < 0x0100; vpsm++) |
| { |
| p_rcb = l2cu_find_ble_rcb_by_psm(vpsm); |
| if (p_rcb == NULL) |
| break; |
| } |
| |
| L2CAP_TRACE_API("%s Real PSM: 0x%04x Virtual PSM: 0x%04x", __func__, psm, vpsm); |
| } |
| |
| /* If registration block already there, just overwrite it */ |
| p_rcb = l2cu_find_ble_rcb_by_psm(vpsm); |
| if (p_rcb == NULL) |
| { |
| p_rcb = l2cu_allocate_ble_rcb(vpsm); |
| if (p_rcb == NULL) |
| { |
| L2CAP_TRACE_WARNING("%s No BLE RCB available, PSM: 0x%04x vPSM: 0x%04x", |
| __func__, psm, vpsm); |
| return 0; |
| } |
| } |
| |
| p_rcb->api = *p_cb_info; |
| p_rcb->real_psm = psm; |
| |
| return vpsm; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_DeregisterLECoc |
| ** |
| ** Description Other layers call this function to de-register for L2CAP |
| ** Connection Oriented Channel. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void L2CA_DeregisterLECoc(uint16_t psm) |
| { |
| L2CAP_TRACE_API("%s called for PSM: 0x%04x", __func__, psm); |
| |
| tL2C_RCB *p_rcb = l2cu_find_ble_rcb_by_psm(psm); |
| if (p_rcb == NULL) |
| { |
| L2CAP_TRACE_WARNING("%s PSM: 0x%04x not found for deregistration", psm); |
| return; |
| } |
| |
| tL2C_LCB *p_lcb = &l2cb.lcb_pool[0]; |
| for (int i = 0; i < MAX_L2CAP_LINKS; i++, p_lcb++) |
| { |
| if (!p_lcb->in_use || p_lcb->transport != BT_TRANSPORT_LE) |
| continue; |
| |
| tL2C_CCB *p_ccb = p_lcb->ccb_queue.p_first_ccb; |
| if ((p_ccb == NULL) || (p_lcb->link_state == LST_DISCONNECTING)) |
| continue; |
| |
| if (p_ccb->in_use && |
| (p_ccb->chnl_state == CST_W4_L2CAP_DISCONNECT_RSP || |
| p_ccb->chnl_state == CST_W4_L2CA_DISCONNECT_RSP)) |
| continue; |
| |
| if (p_ccb->p_rcb == p_rcb) |
| l2c_csm_execute(p_ccb, L2CEVT_L2CA_DISCONNECT_REQ, NULL); |
| } |
| |
| l2cu_release_rcb (p_rcb); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_ConnectLECocReq |
| ** |
| ** Description Higher layers call this function to create an L2CAP connection. |
| ** Note that the connection is not established at this time, but |
| ** connection establishment gets started. The callback function |
| ** will be invoked when connection establishes or fails. |
| ** |
| ** Parameters: PSM: L2CAP PSM for the connection |
| ** BD address of the peer |
| ** Local Coc configurations |
| |
| ** Returns the CID of the connection, or 0 if it failed to start |
| ** |
| *******************************************************************************/ |
| uint16_t L2CA_ConnectLECocReq(uint16_t psm, BD_ADDR p_bd_addr, tL2CAP_LE_CFG_INFO *p_cfg) |
| { |
| L2CAP_TRACE_API("%s PSM: 0x%04x BDA: %02x:%02x:%02x:%02x:%02x:%02x", __func__, psm, |
| p_bd_addr[0], p_bd_addr[1], p_bd_addr[2], p_bd_addr[3], p_bd_addr[4], p_bd_addr[5]); |
| |
| /* Fail if we have not established communications with the controller */ |
| if (!BTM_IsDeviceUp()) |
| { |
| L2CAP_TRACE_WARNING("%s BTU not ready", __func__); |
| return 0; |
| } |
| |
| /* Fail if the PSM is not registered */ |
| tL2C_RCB *p_rcb = l2cu_find_ble_rcb_by_psm(psm); |
| if (p_rcb == NULL) |
| { |
| L2CAP_TRACE_WARNING("%s No BLE RCB, PSM: 0x%04x", __func__, psm); |
| return 0; |
| } |
| |
| /* First, see if we already have a le link to the remote */ |
| tL2C_LCB *p_lcb = l2cu_find_lcb_by_bd_addr(p_bd_addr, BT_TRANSPORT_LE); |
| if (p_lcb == NULL) |
| { |
| /* No link. Get an LCB and start link establishment */ |
| p_lcb = l2cu_allocate_lcb(p_bd_addr, false, BT_TRANSPORT_LE); |
| if ((p_lcb == NULL) |
| /* currently use BR/EDR for ERTM mode l2cap connection */ |
| || (l2cu_create_conn(p_lcb, BT_TRANSPORT_LE) == false) ) |
| { |
| L2CAP_TRACE_WARNING("%s conn not started for PSM: 0x%04x p_lcb: 0x%08x", |
| __func__, psm, p_lcb); |
| return 0; |
| } |
| } |
| |
| /* Allocate a channel control block */ |
| tL2C_CCB *p_ccb = l2cu_allocate_ccb(p_lcb, 0); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING("%s no CCB, PSM: 0x%04x", __func__, psm); |
| return 0; |
| } |
| |
| /* Save registration info */ |
| p_ccb->p_rcb = p_rcb; |
| |
| /* Save the configuration */ |
| if (p_cfg) |
| memcpy(&p_ccb->local_conn_cfg, p_cfg, sizeof(tL2CAP_LE_CFG_INFO)); |
| |
| /* If link is up, start the L2CAP connection */ |
| if (p_lcb->link_state == LST_CONNECTED) |
| { |
| if (p_ccb->p_lcb->transport == BT_TRANSPORT_LE) |
| { |
| L2CAP_TRACE_DEBUG("%s LE Link is up", __func__); |
| l2c_csm_execute(p_ccb, L2CEVT_L2CA_CONNECT_REQ, NULL); |
| } |
| } |
| |
| /* If link is disconnecting, save link info to retry after disconnect |
| * Possible Race condition when a reconnect occurs |
| * on the channel during a disconnect of link. This |
| * ccb will be automatically retried after link disconnect |
| * arrives |
| */ |
| else if (p_lcb->link_state == LST_DISCONNECTING) |
| { |
| L2CAP_TRACE_DEBUG("%s link disconnecting: RETRY LATER", __func__); |
| |
| /* Save ccb so it can be started after disconnect is finished */ |
| p_lcb->p_pending_ccb = p_ccb; |
| } |
| |
| L2CAP_TRACE_API("%s(psm: 0x%04x) returned CID: 0x%04x", __func__, psm, p_ccb->local_cid); |
| |
| /* Return the local CID as our handle */ |
| return p_ccb->local_cid; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_ConnectLECocRsp |
| ** |
| ** Description Higher layers call this function to accept an incoming |
| ** L2CAP COC connection, for which they had gotten an connect |
| ** indication callback. |
| ** |
| ** Returns true for success, false for failure |
| ** |
| *******************************************************************************/ |
| bool L2CA_ConnectLECocRsp (BD_ADDR p_bd_addr, uint8_t id, uint16_t lcid, uint16_t result, |
| uint16_t status, tL2CAP_LE_CFG_INFO *p_cfg) |
| { |
| L2CAP_TRACE_API("%s CID: 0x%04x Result: %d Status: %d BDA: %02x:%02x:%02x:%02x:%02x:%02x", |
| __func__, lcid, result, status, |
| p_bd_addr[0], p_bd_addr[1], p_bd_addr[2], p_bd_addr[3], p_bd_addr[4], p_bd_addr[5]); |
| |
| |
| /* First, find the link control block */ |
| tL2C_LCB *p_lcb = l2cu_find_lcb_by_bd_addr(p_bd_addr, BT_TRANSPORT_LE); |
| if (p_lcb == NULL) |
| { |
| /* No link. Get an LCB and start link establishment */ |
| L2CAP_TRACE_WARNING("%s no LCB", __func__); |
| return false; |
| } |
| |
| /* Now, find the channel control block */ |
| tL2C_CCB *p_ccb = l2cu_find_ccb_by_cid(p_lcb, lcid); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING("%s no CCB", __func__); |
| return false; |
| } |
| |
| /* The IDs must match */ |
| if (p_ccb->remote_id != id) |
| { |
| L2CAP_TRACE_WARNING("%s bad id. Expected: %d Got: %d", __func__, p_ccb->remote_id, id); |
| return false; |
| } |
| |
| if (p_cfg) |
| memcpy(&p_ccb->local_conn_cfg, p_cfg, sizeof(tL2CAP_LE_CFG_INFO)); |
| |
| if (result == L2CAP_CONN_OK) |
| l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONNECT_RSP, NULL); |
| else |
| { |
| tL2C_CONN_INFO conn_info; |
| memcpy(conn_info.bd_addr, p_bd_addr, BD_ADDR_LEN); |
| conn_info.l2cap_result = result; |
| conn_info.l2cap_status = status; |
| l2c_csm_execute(p_ccb, L2CEVT_L2CA_CONNECT_RSP_NEG, &conn_info); |
| } |
| |
| return true; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_GetPeerLECocConfig |
| ** |
| ** Description Get a peers configuration for LE Connection Oriented Channel. |
| ** |
| ** Parameters: local channel id |
| ** Pointers to peers configuration storage area |
| ** |
| ** Return value: true if peer is connected |
| ** |
| *******************************************************************************/ |
| bool L2CA_GetPeerLECocConfig (uint16_t lcid, tL2CAP_LE_CFG_INFO* peer_cfg) |
| { |
| L2CAP_TRACE_API ("%s CID: 0x%04x", __func__, lcid); |
| |
| tL2C_CCB *p_ccb = l2cu_find_ccb_by_cid(NULL, lcid); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_ERROR("%s No CCB for CID:0x%04x", __func__, lcid); |
| return false; |
| } |
| |
| if (peer_cfg != NULL) |
| memcpy(peer_cfg, &p_ccb->peer_conn_cfg, sizeof(tL2CAP_LE_CFG_INFO)); |
| |
| return true; |
| } |
| |
| bool L2CA_SetConnectionCallbacks(uint16_t local_cid, const tL2CAP_APPL_INFO *callbacks) { |
| assert(callbacks != NULL); |
| assert(callbacks->pL2CA_ConnectInd_Cb == NULL); |
| assert(callbacks->pL2CA_ConnectCfm_Cb != NULL); |
| assert(callbacks->pL2CA_ConfigInd_Cb != NULL); |
| assert(callbacks->pL2CA_ConfigCfm_Cb != NULL); |
| assert(callbacks->pL2CA_DisconnectInd_Cb != NULL); |
| assert(callbacks->pL2CA_DisconnectCfm_Cb != NULL); |
| assert(callbacks->pL2CA_CongestionStatus_Cb != NULL); |
| assert(callbacks->pL2CA_DataInd_Cb != NULL); |
| assert(callbacks->pL2CA_TxComplete_Cb != NULL); |
| |
| tL2C_CCB *channel_control_block = l2cu_find_ccb_by_cid(NULL, local_cid); |
| if (!channel_control_block) { |
| LOG_ERROR(LOG_TAG, "%s no channel control block found for L2CAP LCID=0x%04x.", __func__, local_cid); |
| return false; |
| } |
| |
| // We're making a connection-specific registration control block so we check if |
| // we already have a private one allocated to us on the heap. If not, we make a |
| // new allocation, mark it as heap-allocated, and inherit the fields from the old |
| // control block. |
| tL2C_RCB *registration_control_block = channel_control_block->p_rcb; |
| if (!channel_control_block->should_free_rcb) { |
| registration_control_block = (tL2C_RCB *)osi_calloc(sizeof(tL2C_RCB)); |
| |
| *registration_control_block = *channel_control_block->p_rcb; |
| channel_control_block->p_rcb = registration_control_block; |
| channel_control_block->should_free_rcb = true; |
| } |
| |
| registration_control_block->api = *callbacks; |
| return true; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_ConnectRsp |
| ** |
| ** Description Higher layers call this function to accept an incoming |
| ** L2CAP connection, for which they had gotten an connect |
| ** indication callback. |
| ** |
| ** Returns true for success, false for failure |
| ** |
| *******************************************************************************/ |
| bool L2CA_ConnectRsp (BD_ADDR p_bd_addr, uint8_t id, uint16_t lcid, |
| uint16_t result, uint16_t status) |
| { |
| return L2CA_ErtmConnectRsp (p_bd_addr, id, lcid, result, status, NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_ErtmConnectRsp |
| ** |
| ** Description Higher layers call this function to accept an incoming |
| ** L2CAP connection, for which they had gotten an connect |
| ** indication callback. |
| ** |
| ** Returns true for success, false for failure |
| ** |
| *******************************************************************************/ |
| bool L2CA_ErtmConnectRsp (BD_ADDR p_bd_addr, uint8_t id, uint16_t lcid, uint16_t result, |
| uint16_t status, tL2CAP_ERTM_INFO *p_ertm_info) |
| { |
| tL2C_LCB *p_lcb; |
| tL2C_CCB *p_ccb; |
| |
| L2CAP_TRACE_API ("L2CA_ErtmConnectRsp() CID: 0x%04x Result: %d Status: %d BDA: %08x%04x p_ertm_info:0x%08x", |
| lcid, result, status, |
| (p_bd_addr[0]<<24)+(p_bd_addr[1]<<16)+(p_bd_addr[2]<<8)+p_bd_addr[3], |
| (p_bd_addr[4]<<8)+p_bd_addr[5], p_ertm_info); |
| |
| /* First, find the link control block */ |
| p_lcb = l2cu_find_lcb_by_bd_addr(p_bd_addr, BT_TRANSPORT_BR_EDR); |
| if (p_lcb == NULL) |
| { |
| /* No link. Get an LCB and start link establishment */ |
| L2CAP_TRACE_WARNING ("L2CAP - no LCB for L2CA_conn_rsp"); |
| return (false); |
| } |
| |
| /* Now, find the channel control block */ |
| p_ccb = l2cu_find_ccb_by_cid(p_lcb, lcid); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_conn_rsp"); |
| return (false); |
| } |
| |
| /* The IDs must match */ |
| if (p_ccb->remote_id != id) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - bad id in L2CA_conn_rsp. Exp: %d Got: %d", p_ccb->remote_id, id); |
| return (false); |
| } |
| |
| if (p_ertm_info) |
| { |
| p_ccb->ertm_info = *p_ertm_info; |
| |
| /* Replace default indicators with the actual default pool */ |
| if (p_ccb->ertm_info.fcr_rx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE) |
| p_ccb->ertm_info.fcr_rx_buf_size = L2CAP_FCR_RX_BUF_SIZE; |
| |
| if (p_ccb->ertm_info.fcr_tx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE) |
| p_ccb->ertm_info.fcr_tx_buf_size = L2CAP_FCR_TX_BUF_SIZE; |
| |
| if (p_ccb->ertm_info.user_rx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE) |
| p_ccb->ertm_info.user_rx_buf_size = L2CAP_USER_RX_BUF_SIZE; |
| |
| if (p_ccb->ertm_info.user_tx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE) |
| p_ccb->ertm_info.user_tx_buf_size = L2CAP_USER_TX_BUF_SIZE; |
| |
| p_ccb->max_rx_mtu = p_ertm_info->user_rx_buf_size - |
| (L2CAP_MIN_OFFSET + L2CAP_SDU_LEN_OFFSET + L2CAP_FCS_LEN); |
| } |
| |
| if (result == L2CAP_CONN_OK) |
| { |
| l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONNECT_RSP, NULL); |
| } |
| else |
| { |
| tL2C_CONN_INFO conn_info; |
| |
| conn_info.l2cap_result = result; |
| conn_info.l2cap_status = status; |
| |
| if (result == L2CAP_CONN_PENDING) |
| l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONNECT_RSP, &conn_info); |
| else |
| l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONNECT_RSP_NEG, &conn_info); |
| } |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_ConfigReq |
| ** |
| ** Description Higher layers call this function to send configuration. |
| ** |
| ** Note: The FCR options of p_cfg are not used. |
| ** |
| ** Returns true if configuration sent, else false |
| ** |
| *******************************************************************************/ |
| bool L2CA_ConfigReq (uint16_t cid, tL2CAP_CFG_INFO *p_cfg) |
| { |
| tL2C_CCB *p_ccb; |
| |
| L2CAP_TRACE_API ("L2CA_ConfigReq() CID 0x%04x: fcr_present:%d (mode %d) mtu_present:%d (%d)", |
| cid, p_cfg->fcr_present, p_cfg->fcr.mode, p_cfg->mtu_present, p_cfg->mtu); |
| |
| /* Find the channel control block. We don't know the link it is on. */ |
| p_ccb = l2cu_find_ccb_by_cid(NULL, cid); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_cfg_req, CID: %d", cid); |
| return (false); |
| } |
| |
| /* We need to have at least one mode type common with the peer */ |
| if (!l2c_fcr_adj_our_req_options(p_ccb, p_cfg)) |
| return (false); |
| |
| /* Don't adjust FCR options if not used */ |
| if ((!p_cfg->fcr_present)||(p_cfg->fcr.mode == L2CAP_FCR_BASIC_MODE)) |
| { |
| /* FCR and FCS options are not used in basic mode */ |
| p_cfg->fcs_present = false; |
| p_cfg->ext_flow_spec_present = false; |
| |
| if ( (p_cfg->mtu_present) && (p_cfg->mtu > L2CAP_MTU_SIZE) ) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - adjust MTU: %u too large", p_cfg->mtu); |
| p_cfg->mtu = L2CAP_MTU_SIZE; |
| } |
| } |
| |
| /* Save the adjusted configuration in case it needs to be used for renegotiation */ |
| p_ccb->our_cfg = *p_cfg; |
| |
| l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONFIG_REQ, p_cfg); |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_ConfigRsp |
| ** |
| ** Description Higher layers call this function to send a configuration |
| ** response. |
| ** |
| ** Returns true if configuration response sent, else false |
| ** |
| *******************************************************************************/ |
| bool L2CA_ConfigRsp (uint16_t cid, tL2CAP_CFG_INFO *p_cfg) |
| { |
| tL2C_CCB *p_ccb; |
| |
| L2CAP_TRACE_API ("L2CA_ConfigRsp() CID: 0x%04x Result: %d MTU present:%d Flush TO:%d FCR:%d FCS:%d", |
| cid, p_cfg->result, p_cfg->mtu_present, p_cfg->flush_to_present, p_cfg->fcr_present, p_cfg->fcs_present); |
| |
| /* Find the channel control block. We don't know the link it is on. */ |
| p_ccb = l2cu_find_ccb_by_cid(NULL, cid); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_cfg_rsp, CID: %d", cid); |
| return (false); |
| } |
| |
| if ( (p_cfg->result == L2CAP_CFG_OK) || (p_cfg->result == L2CAP_CFG_PENDING) ) |
| l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONFIG_RSP, p_cfg); |
| else |
| { |
| p_cfg->fcr_present = false; /* FCR options already negotiated before this point */ |
| |
| /* Clear out any cached options that are being returned as an error (excluding FCR) */ |
| if (p_cfg->mtu_present) |
| p_ccb->peer_cfg.mtu_present = false; |
| if (p_cfg->flush_to_present) |
| p_ccb->peer_cfg.flush_to_present = false; |
| if (p_cfg->qos_present) |
| p_ccb->peer_cfg.qos_present = false; |
| |
| l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONFIG_RSP_NEG, p_cfg); |
| } |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_DisconnectReq |
| ** |
| ** Description Higher layers call this function to disconnect a channel. |
| ** |
| ** Returns true if disconnect sent, else false |
| ** |
| *******************************************************************************/ |
| bool L2CA_DisconnectReq (uint16_t cid) |
| { |
| tL2C_CCB *p_ccb; |
| |
| L2CAP_TRACE_API ("L2CA_DisconnectReq() CID: 0x%04x", cid); |
| |
| /* Find the channel control block. We don't know the link it is on. */ |
| p_ccb = l2cu_find_ccb_by_cid(NULL, cid); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_disc_req, CID: %d", cid); |
| return (false); |
| } |
| |
| l2c_csm_execute (p_ccb, L2CEVT_L2CA_DISCONNECT_REQ, NULL); |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_DisconnectRsp |
| ** |
| ** Description Higher layers call this function to acknowledge the |
| ** disconnection of a channel. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| bool L2CA_DisconnectRsp (uint16_t cid) |
| { |
| tL2C_CCB *p_ccb; |
| |
| L2CAP_TRACE_API ("L2CA_DisconnectRsp() CID: 0x%04x", cid); |
| |
| /* Find the channel control block. We don't know the link it is on. */ |
| p_ccb = l2cu_find_ccb_by_cid(NULL, cid); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_disc_rsp, CID: %d", cid); |
| return (false); |
| } |
| |
| l2c_csm_execute (p_ccb, L2CEVT_L2CA_DISCONNECT_RSP, NULL); |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_Ping |
| ** |
| ** Description Higher layers call this function to send an echo request. |
| ** |
| ** Returns true if echo request sent, else false. |
| ** |
| *******************************************************************************/ |
| bool L2CA_Ping (BD_ADDR p_bd_addr, tL2CA_ECHO_RSP_CB *p_callback) |
| { |
| tL2C_LCB *p_lcb; |
| |
| L2CAP_TRACE_API ("L2CA_Ping() BDA: %02x-%02x-%02x-%02x-%02x-%02x", |
| p_bd_addr[0], p_bd_addr[1], p_bd_addr[2], p_bd_addr[3], p_bd_addr[4], p_bd_addr[5]); |
| |
| /* Fail if we have not established communications with the controller */ |
| if (!BTM_IsDeviceUp()) |
| return (false); |
| |
| /* First, see if we already have a link to the remote */ |
| p_lcb = l2cu_find_lcb_by_bd_addr(p_bd_addr, BT_TRANSPORT_BR_EDR); |
| if (p_lcb == NULL) |
| { |
| /* No link. Get an LCB and start link establishment */ |
| p_lcb = l2cu_allocate_lcb(p_bd_addr, false, BT_TRANSPORT_BR_EDR); |
| if (p_lcb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no LCB for L2CA_ping"); |
| return (false); |
| } |
| if (l2cu_create_conn(p_lcb, BT_TRANSPORT_BR_EDR) == false) |
| { |
| return (false); |
| } |
| |
| p_lcb->p_echo_rsp_cb = p_callback; |
| |
| return (true); |
| } |
| |
| /* We only allow 1 ping outstanding at a time */ |
| if (p_lcb->p_echo_rsp_cb != NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - rejected second L2CA_ping"); |
| return (false); |
| } |
| |
| /* Have a link control block. If link is disconnecting, tell user to retry later */ |
| if (p_lcb->link_state == LST_DISCONNECTING) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - L2CA_ping rejected - link disconnecting"); |
| return (false); |
| } |
| |
| /* Save address of callback */ |
| p_lcb->p_echo_rsp_cb = p_callback; |
| |
| if (p_lcb->link_state == LST_CONNECTED) |
| { |
| l2cu_adj_id(p_lcb, L2CAP_ADJ_BRCM_ID); /* Make sure not using Broadcom ID */ |
| l2cu_send_peer_echo_req (p_lcb, NULL, 0); |
| alarm_set_on_queue(p_lcb->l2c_lcb_timer, |
| L2CAP_ECHO_RSP_TIMEOUT_MS, |
| l2c_lcb_timer_timeout, p_lcb, |
| btu_general_alarm_queue); |
| } |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_Echo |
| ** |
| ** Description Higher layers call this function to send an echo request |
| ** with application-specific data. |
| ** |
| ** Returns true if echo request sent, else false. |
| ** |
| *******************************************************************************/ |
| bool L2CA_Echo (BD_ADDR p_bd_addr, BT_HDR *p_data, tL2CA_ECHO_DATA_CB *p_callback) |
| { |
| tL2C_LCB *p_lcb; |
| uint8_t *pp; |
| |
| L2CAP_TRACE_API ("L2CA_Echo() BDA: %08X%04X", |
| ((p_bd_addr[0] << 24) + (p_bd_addr[1] << 16) + (p_bd_addr[2] << 8) + (p_bd_addr[3])), |
| ((p_bd_addr[4] << 8) + (p_bd_addr[5]))); |
| |
| /* Fail if we have not established communications with the controller */ |
| if (!BTM_IsDeviceUp()) |
| return (false); |
| |
| if ((memcmp(BT_BD_ANY, p_bd_addr, BD_ADDR_LEN) == 0) && (p_data == NULL)) |
| { |
| /* Only register callback without sending message. */ |
| l2cb.p_echo_data_cb = p_callback; |
| return true; |
| } |
| |
| /* We assume the upper layer will call this function only when the link is established. */ |
| p_lcb = l2cu_find_lcb_by_bd_addr(p_bd_addr, BT_TRANSPORT_BR_EDR); |
| if (p_lcb == NULL) |
| { |
| L2CAP_TRACE_ERROR ("L2CA_Echo ERROR : link not established"); |
| return false; |
| } |
| |
| if (p_lcb->link_state != LST_CONNECTED) |
| { |
| L2CAP_TRACE_ERROR ("L2CA_Echo ERROR : link is not connected"); |
| return false; |
| } |
| |
| /* Save address of callback */ |
| l2cb.p_echo_data_cb = p_callback; |
| |
| /* Set the pointer to the beginning of the data */ |
| pp = (uint8_t *)(p_data + 1) + p_data->offset; |
| l2cu_adj_id(p_lcb, L2CAP_ADJ_BRCM_ID); /* Make sure not using Broadcom ID */ |
| l2cu_send_peer_echo_req (p_lcb, pp, p_data->len); |
| |
| return (true); |
| |
| } |
| |
| bool L2CA_GetIdentifiers(uint16_t lcid, uint16_t *rcid, uint16_t *handle) { |
| tL2C_CCB *control_block = l2cu_find_ccb_by_cid(NULL, lcid); |
| if (!control_block) |
| return false; |
| |
| if (rcid) |
| *rcid = control_block->remote_cid; |
| if (handle) |
| *handle = control_block->p_lcb->handle; |
| |
| return true; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_SetIdleTimeout |
| ** |
| ** Description Higher layers call this function to set the idle timeout for |
| ** a connection, or for all future connections. The "idle timeout" |
| ** is the amount of time that a connection can remain up with |
| ** no L2CAP channels on it. A timeout of zero means that the |
| ** connection will be torn down immediately when the last channel |
| ** is removed. A timeout of 0xFFFF means no timeout. Values are |
| ** in seconds. |
| ** |
| ** Returns true if command succeeded, false if failed |
| ** |
| ** NOTE This timeout takes effect after at least 1 channel has been |
| ** established and removed. L2CAP maintains its own timer from |
| ** whan a connection is established till the first channel is |
| ** set up. |
| *******************************************************************************/ |
| bool L2CA_SetIdleTimeout (uint16_t cid, uint16_t timeout, bool is_global) |
| { |
| tL2C_CCB *p_ccb; |
| tL2C_LCB *p_lcb; |
| |
| if (is_global) |
| { |
| l2cb.idle_timeout = timeout; |
| } |
| else |
| { |
| /* Find the channel control block. We don't know the link it is on. */ |
| p_ccb = l2cu_find_ccb_by_cid(NULL, cid); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_SetIdleTimeout, CID: %d", cid); |
| return (false); |
| } |
| |
| p_lcb = p_ccb->p_lcb; |
| |
| if ((p_lcb) && (p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED)) |
| p_lcb->idle_timeout = timeout; |
| else |
| return (false); |
| } |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_SetIdleTimeoutByBdAddr |
| ** |
| ** Description Higher layers call this function to set the idle timeout for |
| ** a connection. The "idle timeout" is the amount of time that |
| ** a connection can remain up with no L2CAP channels on it. |
| ** A timeout of zero means that the connection will be torn |
| ** down immediately when the last channel is removed. |
| ** A timeout of 0xFFFF means no timeout. Values are in seconds. |
| ** A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY, |
| ** then the idle timeouts for all active l2cap links will be |
| ** changed. |
| ** |
| ** Returns true if command succeeded, false if failed |
| ** |
| ** NOTE This timeout applies to all logical channels active on the |
| ** ACL link. |
| *******************************************************************************/ |
| bool L2CA_SetIdleTimeoutByBdAddr(BD_ADDR bd_addr, uint16_t timeout, tBT_TRANSPORT transport) |
| { |
| tL2C_LCB *p_lcb; |
| |
| if (memcmp (BT_BD_ANY, bd_addr, BD_ADDR_LEN)) |
| { |
| p_lcb = l2cu_find_lcb_by_bd_addr( bd_addr, transport); |
| if ((p_lcb) && (p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED)) |
| { |
| p_lcb->idle_timeout = timeout; |
| |
| if (!p_lcb->ccb_queue.p_first_ccb) |
| l2cu_no_dynamic_ccbs (p_lcb); |
| } |
| else |
| return false; |
| } |
| else |
| { |
| int xx; |
| tL2C_LCB *p_lcb = &l2cb.lcb_pool[0]; |
| |
| for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++) |
| { |
| if ((p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED)) |
| { |
| p_lcb->idle_timeout = timeout; |
| |
| if (!p_lcb->ccb_queue.p_first_ccb) |
| l2cu_no_dynamic_ccbs (p_lcb); |
| } |
| } |
| } |
| |
| return true; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_SetTraceLevel |
| ** |
| ** Description This function sets the trace level for L2CAP. If called with |
| ** a value of 0xFF, it simply reads the current trace level. |
| ** |
| ** Returns the new (current) trace level |
| ** |
| *******************************************************************************/ |
| uint8_t L2CA_SetTraceLevel (uint8_t new_level) |
| { |
| if (new_level != 0xFF) |
| l2cb.l2cap_trace_level = new_level; |
| |
| return (l2cb.l2cap_trace_level); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_SetDesireRole |
| ** |
| ** Description This function sets the desire role for L2CAP. |
| ** If the new role is L2CAP_ROLE_ALLOW_SWITCH, allow switch on |
| ** HciCreateConnection. |
| ** If the new role is L2CAP_ROLE_DISALLOW_SWITCH, do not allow switch on |
| ** HciCreateConnection. |
| ** |
| ** If the new role is a valid role (HCI_ROLE_MASTER or HCI_ROLE_SLAVE), |
| ** the desire role is set to the new value. Otherwise, it is not changed. |
| ** |
| ** Returns the new (current) role |
| ** |
| *******************************************************************************/ |
| uint8_t L2CA_SetDesireRole (uint8_t new_role) |
| { |
| L2CAP_TRACE_API ("L2CA_SetDesireRole() new:x%x, disallow_switch:%d", |
| new_role, l2cb.disallow_switch); |
| |
| if (L2CAP_ROLE_CHECK_SWITCH != (L2CAP_ROLE_CHECK_SWITCH & new_role)) |
| { |
| /* do not process the allow_switch when both bits are set */ |
| if (new_role & L2CAP_ROLE_ALLOW_SWITCH) |
| { |
| l2cb.disallow_switch = false; |
| } |
| if (new_role & L2CAP_ROLE_DISALLOW_SWITCH) |
| { |
| l2cb.disallow_switch = true; |
| } |
| } |
| |
| if (new_role == HCI_ROLE_MASTER || new_role == HCI_ROLE_SLAVE) |
| l2cb.desire_role = new_role; |
| |
| return (l2cb.desire_role); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_LocalLoopbackReq |
| ** |
| ** Description This function sets up a CID for local loopback |
| ** |
| ** Returns CID of 0 if none. |
| ** |
| *******************************************************************************/ |
| uint16_t L2CA_LocalLoopbackReq (uint16_t psm, uint16_t handle, BD_ADDR p_bd_addr) |
| { |
| tL2C_LCB *p_lcb; |
| tL2C_CCB *p_ccb; |
| tL2C_RCB *p_rcb; |
| |
| L2CAP_TRACE_API ("L2CA_LocalLoopbackReq() PSM: %d Handle: 0x%04x", psm, handle); |
| |
| /* Fail if we have not established communications with the controller */ |
| if (!BTM_IsDeviceUp()) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP loop req - BTU not ready"); |
| return (0); |
| } |
| |
| /* Fail if the PSM is not registered */ |
| p_rcb = l2cu_find_rcb_by_psm(psm); |
| if (p_rcb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no RCB for L2CA_conn_req, PSM: %d", psm); |
| return (0); |
| } |
| |
| p_lcb = l2cu_allocate_lcb(p_bd_addr, false, BT_TRANSPORT_BR_EDR); |
| if (p_lcb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no LCB for L2CA_conn_req"); |
| return (0); |
| } |
| |
| p_lcb->link_state = LST_CONNECTED; |
| p_lcb->handle = handle; |
| |
| /* Allocate a channel control block */ |
| p_ccb = l2cu_allocate_ccb(p_lcb, 0); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_conn_req"); |
| return (0); |
| } |
| |
| /* Save registration info */ |
| p_ccb->p_rcb = p_rcb; |
| p_ccb->chnl_state = CST_OPEN; |
| p_ccb->remote_cid = p_ccb->local_cid; |
| p_ccb->config_done = CFG_DONE_MASK; |
| |
| /* Return the local CID as our handle */ |
| return (p_ccb->local_cid); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_SetAclPriority |
| ** |
| ** Description Sets the transmission priority for a channel. |
| ** (For initial implementation only two values are valid. |
| ** L2CAP_PRIORITY_NORMAL and L2CAP_PRIORITY_HIGH). |
| ** |
| ** Returns true if a valid channel, else false |
| ** |
| *******************************************************************************/ |
| bool L2CA_SetAclPriority (BD_ADDR bd_addr, uint8_t priority) |
| { |
| L2CAP_TRACE_API ("L2CA_SetAclPriority() bdaddr: %02x%02x%02x%02x%04x, priority:%d", |
| bd_addr[0], bd_addr[1], bd_addr[2], |
| bd_addr[3], (bd_addr[4] << 8) + bd_addr[5], priority); |
| |
| return (l2cu_set_acl_priority(bd_addr, priority, false)); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_FlowControl |
| ** |
| ** Description Higher layers call this function to flow control a channel. |
| ** |
| ** data_enabled - true data flows, false data is stopped |
| ** |
| ** Returns true if valid channel, else false |
| ** |
| *******************************************************************************/ |
| bool L2CA_FlowControl (uint16_t cid, bool data_enabled) |
| { |
| tL2C_CCB *p_ccb; |
| bool on_off = !data_enabled; |
| |
| L2CAP_TRACE_API ("L2CA_FlowControl(%d) CID: 0x%04x", on_off, cid); |
| |
| /* Find the channel control block. We don't know the link it is on. */ |
| p_ccb = l2cu_find_ccb_by_cid(NULL, cid); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_FlowControl, CID: 0x%04x data_enabled: %d", cid, data_enabled); |
| return (false); |
| } |
| |
| if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_ERTM_MODE) |
| { |
| L2CAP_TRACE_EVENT ("L2CA_FlowControl() invalid mode:%d", p_ccb->peer_cfg.fcr.mode); |
| return (false); |
| } |
| if (p_ccb->fcrb.local_busy != on_off) |
| { |
| p_ccb->fcrb.local_busy = on_off; |
| |
| if ( (p_ccb->chnl_state == CST_OPEN) && (!p_ccb->fcrb.wait_ack) ) |
| { |
| if (on_off) |
| l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RNR, 0); |
| else |
| l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RR, L2CAP_FCR_P_BIT); |
| } |
| } |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_SendTestSFrame |
| ** |
| ** Description Higher layers call this function to send a test S-frame. |
| ** |
| ** Returns true if valid Channel, else false |
| ** |
| *******************************************************************************/ |
| bool L2CA_SendTestSFrame (uint16_t cid, uint8_t sup_type, uint8_t back_track) |
| { |
| tL2C_CCB *p_ccb; |
| |
| L2CAP_TRACE_API ("L2CA_SendTestSFrame() CID: 0x%04x Type: 0x%02x back_track: %u", cid, sup_type, back_track); |
| |
| /* Find the channel control block. We don't know the link it is on. */ |
| p_ccb = l2cu_find_ccb_by_cid(NULL, cid); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_SendTestSFrame, CID: %d", cid); |
| return (false); |
| } |
| |
| if ( (p_ccb->chnl_state != CST_OPEN) || (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_ERTM_MODE) ) |
| return (false); |
| |
| p_ccb->fcrb.next_seq_expected -= back_track; |
| |
| l2c_fcr_send_S_frame (p_ccb, (uint16_t)(sup_type & 3), (uint16_t)(sup_type & (L2CAP_FCR_P_BIT | L2CAP_FCR_F_BIT))); |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_SetTxPriority |
| ** |
| ** Description Sets the transmission priority for a channel. |
| ** |
| ** Returns true if a valid channel, else false |
| ** |
| *******************************************************************************/ |
| bool L2CA_SetTxPriority (uint16_t cid, tL2CAP_CHNL_PRIORITY priority) |
| { |
| tL2C_CCB *p_ccb; |
| |
| L2CAP_TRACE_API ("L2CA_SetTxPriority() CID: 0x%04x, priority:%d", cid, priority); |
| |
| /* Find the channel control block. We don't know the link it is on. */ |
| p_ccb = l2cu_find_ccb_by_cid(NULL, cid); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_SetTxPriority, CID: %d", cid); |
| return (false); |
| } |
| |
| /* it will update the order of CCB in LCB by priority and update round robin service variables */ |
| l2cu_change_pri_ccb (p_ccb, priority); |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_SetChnlDataRate |
| ** |
| ** Description Sets the tx/rx data rate for a channel. |
| ** |
| ** Returns true if a valid channel, else false |
| ** |
| *******************************************************************************/ |
| bool L2CA_SetChnlDataRate (uint16_t cid, tL2CAP_CHNL_DATA_RATE tx, tL2CAP_CHNL_DATA_RATE rx) |
| { |
| tL2C_CCB *p_ccb; |
| |
| L2CAP_TRACE_API ("L2CA_SetChnlDataRate() CID: 0x%04x, tx:%d, rx:%d", cid, tx, rx); |
| |
| /* Find the channel control block. We don't know the link it is on. */ |
| p_ccb = l2cu_find_ccb_by_cid(NULL, cid); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_SetChnlDataRate, CID: %d", cid); |
| return (false); |
| } |
| |
| p_ccb->tx_data_rate = tx; |
| p_ccb->rx_data_rate = rx; |
| |
| /* Adjust channel buffer allocation */ |
| l2c_link_adjust_chnl_allocation (); |
| |
| return(true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_SetFlushTimeout |
| ** |
| ** Description This function set the automatic flush time out in Baseband |
| ** for ACL-U packets. |
| ** BdAddr : the remote BD address of ACL link. If it is BT_DB_ANY |
| ** then the flush time out will be applied to all ACL link. |
| ** FlushTimeout: flush time out in ms |
| ** 0x0000 : No automatic flush |
| ** L2CAP_NO_RETRANSMISSION : No retransmission |
| ** 0x0002 - 0xFFFE : flush time out, if (flush_tout*8)+3/5) |
| ** <= HCI_MAX_AUTO_FLUSH_TOUT (in 625us slot). |
| ** Otherwise, return false. |
| ** L2CAP_NO_AUTOMATIC_FLUSH : No automatic flush |
| ** |
| ** Returns true if command succeeded, false if failed |
| ** |
| ** NOTE This flush timeout applies to all logical channels active on the |
| ** ACL link. |
| *******************************************************************************/ |
| bool L2CA_SetFlushTimeout (BD_ADDR bd_addr, uint16_t flush_tout) |
| { |
| tL2C_LCB *p_lcb; |
| uint16_t hci_flush_to; |
| uint32_t temp; |
| |
| /* no automatic flush (infinite timeout) */ |
| if (flush_tout == 0x0000) |
| { |
| hci_flush_to = flush_tout; |
| flush_tout = L2CAP_NO_AUTOMATIC_FLUSH; |
| } |
| /* no retransmission */ |
| else if (flush_tout == L2CAP_NO_RETRANSMISSION) |
| { |
| /* not mandatory range for controller */ |
| /* Packet is flushed before getting any ACK/NACK */ |
| /* To do this, flush timeout should be 1 baseband slot */ |
| hci_flush_to = flush_tout; |
| } |
| /* no automatic flush (infinite timeout) */ |
| else if (flush_tout == L2CAP_NO_AUTOMATIC_FLUSH) |
| { |
| hci_flush_to = 0x0000; |
| } |
| else |
| { |
| /* convert L2CAP flush_to to 0.625 ms units, with round */ |
| temp = (((uint32_t)flush_tout * 8) + 3) / 5; |
| |
| /* if L2CAP flush_to within range of HCI, set HCI flush timeout */ |
| if (temp > HCI_MAX_AUTO_FLUSH_TOUT) |
| { |
| L2CAP_TRACE_WARNING("WARNING L2CA_SetFlushTimeout timeout(0x%x) is out of range", flush_tout); |
| return false; |
| } |
| else |
| { |
| hci_flush_to = (uint16_t)temp; |
| } |
| } |
| |
| if (memcmp (BT_BD_ANY, bd_addr, BD_ADDR_LEN)) |
| { |
| p_lcb = l2cu_find_lcb_by_bd_addr (bd_addr, BT_TRANSPORT_BR_EDR); |
| |
| if ((p_lcb) && (p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED)) |
| { |
| if (p_lcb->link_flush_tout != flush_tout) |
| { |
| p_lcb->link_flush_tout = flush_tout; |
| |
| L2CAP_TRACE_API ("L2CA_SetFlushTimeout 0x%04x ms for bd_addr [...;%02x%02x%02x]", |
| flush_tout, bd_addr[3], bd_addr[4], bd_addr[5]); |
| |
| btsnd_hcic_write_auto_flush_tout(p_lcb->handle, hci_flush_to); |
| } |
| } |
| else |
| { |
| L2CAP_TRACE_WARNING ("WARNING L2CA_SetFlushTimeout No lcb for bd_addr [...;%02x%02x%02x]", |
| bd_addr[3], bd_addr[4], bd_addr[5]); |
| return (false); |
| } |
| } |
| else |
| { |
| int xx; |
| p_lcb = &l2cb.lcb_pool[0]; |
| |
| for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++) |
| { |
| if ((p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED)) |
| { |
| if (p_lcb->link_flush_tout != flush_tout) |
| { |
| p_lcb->link_flush_tout = flush_tout; |
| |
| L2CAP_TRACE_API ("L2CA_SetFlushTimeout 0x%04x ms for bd_addr [...;%02x%02x%02x]", |
| flush_tout, p_lcb->remote_bd_addr[3], |
| p_lcb->remote_bd_addr[4], p_lcb->remote_bd_addr[5]); |
| |
| btsnd_hcic_write_auto_flush_tout(p_lcb->handle, hci_flush_to); |
| } |
| } |
| } |
| } |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_GetPeerFeatures |
| ** |
| ** Description Get a peers features and fixed channel map |
| ** |
| ** Parameters: BD address of the peer |
| ** Pointers to features and channel mask storage area |
| ** |
| ** Return value: true if peer is connected |
| ** |
| *******************************************************************************/ |
| bool L2CA_GetPeerFeatures (BD_ADDR bd_addr, uint32_t *p_ext_feat, uint8_t *p_chnl_mask) |
| { |
| tL2C_LCB *p_lcb; |
| |
| /* We must already have a link to the remote */ |
| p_lcb = l2cu_find_lcb_by_bd_addr(bd_addr, BT_TRANSPORT_BR_EDR); |
| if (p_lcb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CA_GetPeerFeatures() No BDA: %08x%04x", |
| (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3], |
| (bd_addr[4]<<8)+bd_addr[5]); |
| return (false); |
| } |
| |
| L2CAP_TRACE_API ("L2CA_GetPeerFeatures() BDA: %08x%04x ExtFea: 0x%08x Chnl_Mask[0]: 0x%02x", |
| (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3], |
| (bd_addr[4]<<8)+bd_addr[5], p_lcb->peer_ext_fea, p_lcb->peer_chnl_mask[0]); |
| |
| *p_ext_feat = p_lcb->peer_ext_fea; |
| |
| memcpy (p_chnl_mask, p_lcb->peer_chnl_mask, L2CAP_FIXED_CHNL_ARRAY_SIZE); |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_GetBDAddrbyHandle |
| ** |
| ** Description Get BD address for the given HCI handle |
| ** |
| ** Parameters: HCI handle |
| ** BD address of the peer |
| ** |
| ** Return value: true if found lcb for the given handle, false otherwise |
| ** |
| *******************************************************************************/ |
| bool L2CA_GetBDAddrbyHandle (uint16_t handle, BD_ADDR bd_addr) |
| { |
| tL2C_LCB *p_lcb = NULL; |
| bool found_dev = false; |
| |
| p_lcb = l2cu_find_lcb_by_handle (handle); |
| if (p_lcb) |
| { |
| found_dev = true; |
| memcpy (bd_addr, p_lcb->remote_bd_addr, BD_ADDR_LEN); |
| } |
| |
| return found_dev; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_GetChnlFcrMode |
| ** |
| ** Description Get the channel FCR mode |
| ** |
| ** Parameters: Local CID |
| ** |
| ** Return value: Channel mode |
| ** |
| *******************************************************************************/ |
| uint8_t L2CA_GetChnlFcrMode (uint16_t lcid) |
| { |
| tL2C_CCB *p_ccb = l2cu_find_ccb_by_cid (NULL, lcid); |
| |
| if (p_ccb) |
| { |
| L2CAP_TRACE_API ("L2CA_GetChnlFcrMode() returns mode %d", p_ccb->peer_cfg.fcr.mode); |
| return (p_ccb->peer_cfg.fcr.mode); |
| } |
| |
| L2CAP_TRACE_API ("L2CA_GetChnlFcrMode() returns mode L2CAP_FCR_BASIC_MODE"); |
| return (L2CAP_FCR_BASIC_MODE); |
| } |
| |
| #if (L2CAP_NUM_FIXED_CHNLS > 0) |
| /******************************************************************************* |
| ** |
| ** Function L2CA_RegisterFixedChannel |
| ** |
| ** Description Register a fixed channel. |
| ** |
| ** Parameters: Fixed Channel # |
| ** Channel Callbacks and config |
| ** |
| ** Return value: - |
| ** |
| *******************************************************************************/ |
| bool L2CA_RegisterFixedChannel (uint16_t fixed_cid, tL2CAP_FIXED_CHNL_REG *p_freg) |
| { |
| if ( (fixed_cid < L2CAP_FIRST_FIXED_CHNL) || (fixed_cid > L2CAP_LAST_FIXED_CHNL) ) |
| { |
| L2CAP_TRACE_ERROR ("L2CA_RegisterFixedChannel() Invalid CID: 0x%04x", fixed_cid); |
| |
| return (false); |
| } |
| |
| l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL] = *p_freg; |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_ConnectFixedChnl |
| ** |
| ** Description Connect an fixed signalling channel to a remote device. |
| ** |
| ** Parameters: Fixed CID |
| ** BD Address of remote |
| ** |
| ** Return value: true if connection started |
| ** |
| *******************************************************************************/ |
| bool L2CA_ConnectFixedChnl (uint16_t fixed_cid, BD_ADDR rem_bda) |
| { |
| tL2C_LCB *p_lcb; |
| tBT_TRANSPORT transport = BT_TRANSPORT_BR_EDR; |
| |
| L2CAP_TRACE_API ("%s() CID: 0x%04x BDA: %08x%04x", __func__, fixed_cid, |
| (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]); |
| |
| // Check CID is valid and registered |
| if ( (fixed_cid < L2CAP_FIRST_FIXED_CHNL) || (fixed_cid > L2CAP_LAST_FIXED_CHNL) |
| || (l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb == NULL) ) |
| { |
| L2CAP_TRACE_ERROR ("%s() Invalid CID: 0x%04x", __func__, fixed_cid); |
| return (false); |
| } |
| |
| // Fail if BT is not yet up |
| if (!BTM_IsDeviceUp()) |
| { |
| L2CAP_TRACE_WARNING ("%s(0x%04x) - BTU not ready", __func__, fixed_cid); |
| return (false); |
| } |
| |
| if (fixed_cid >= L2CAP_ATT_CID && fixed_cid <= L2CAP_SMP_CID) |
| transport = BT_TRANSPORT_LE; |
| |
| tL2C_BLE_FIXED_CHNLS_MASK peer_channel_mask; |
| |
| // If we already have a link to the remote, check if it supports that CID |
| p_lcb = l2cu_find_lcb_by_bd_addr(rem_bda, transport); |
| if (p_lcb != NULL) |
| { |
| // Fixed channels are mandatory on LE transports so ignore the received |
| // channel mask and use the locally cached LE channel mask. |
| |
| if (transport == BT_TRANSPORT_LE) |
| peer_channel_mask = l2cb.l2c_ble_fixed_chnls_mask; |
| else |
| peer_channel_mask = p_lcb->peer_chnl_mask[0]; |
| |
| // Check for supported channel |
| if (!(peer_channel_mask & (1 << fixed_cid))) |
| { |
| L2CAP_TRACE_EVENT ("%s() CID:0x%04x BDA: %08x%04x not supported", __func__, |
| fixed_cid,(rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], |
| (rem_bda[4]<<8)+rem_bda[5]); |
| return false; |
| } |
| |
| // Get a CCB and link the lcb to it |
| if (!l2cu_initialize_fixed_ccb (p_lcb, fixed_cid, |
| &l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].fixed_chnl_opts)) |
| { |
| L2CAP_TRACE_WARNING ("%s(0x%04x) - LCB but no CCB", __func__, fixed_cid); |
| return false; |
| } |
| |
| // racing with disconnecting, queue the connection request |
| if (p_lcb->link_state == LST_DISCONNECTING) |
| { |
| L2CAP_TRACE_DEBUG ("$s() - link disconnecting: RETRY LATER", __func__); |
| /* Save ccb so it can be started after disconnect is finished */ |
| p_lcb->p_pending_ccb = p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]; |
| return true; |
| } |
| |
| (*l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedConn_Cb) |
| (fixed_cid,p_lcb->remote_bd_addr, true, 0, p_lcb->transport); |
| return true; |
| } |
| |
| // No link. Get an LCB and start link establishment |
| p_lcb = l2cu_allocate_lcb(rem_bda, false, transport); |
| if (p_lcb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("%s(0x%04x) - no LCB", __func__, fixed_cid); |
| return false; |
| } |
| |
| // Get a CCB and link the lcb to it |
| if (!l2cu_initialize_fixed_ccb (p_lcb, fixed_cid, |
| &l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].fixed_chnl_opts)) |
| { |
| p_lcb->disc_reason = L2CAP_CONN_NO_RESOURCES; |
| L2CAP_TRACE_WARNING ("%s(0x%04x) - no CCB", __func__, fixed_cid); |
| l2cu_release_lcb (p_lcb); |
| return false; |
| } |
| |
| if (!l2cu_create_conn(p_lcb, transport)) |
| { |
| L2CAP_TRACE_WARNING ("%s() - create_conn failed", __func__); |
| l2cu_release_lcb (p_lcb); |
| return false; |
| } |
| return true; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_SendFixedChnlData |
| ** |
| ** Description Write data on a fixed channel. |
| ** |
| ** Parameters: Fixed CID |
| ** BD Address of remote |
| ** Pointer to buffer of type BT_HDR |
| ** |
| ** Return value L2CAP_DW_SUCCESS, if data accepted |
| ** L2CAP_DW_FAILED, if error |
| ** |
| *******************************************************************************/ |
| uint16_t L2CA_SendFixedChnlData (uint16_t fixed_cid, BD_ADDR rem_bda, BT_HDR *p_buf) |
| { |
| tL2C_LCB *p_lcb; |
| tBT_TRANSPORT transport = BT_TRANSPORT_BR_EDR; |
| |
| L2CAP_TRACE_API ("L2CA_SendFixedChnlData() CID: 0x%04x BDA: %08x%04x", fixed_cid, |
| (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]); |
| |
| if (fixed_cid >= L2CAP_ATT_CID && fixed_cid <= L2CAP_SMP_CID) |
| transport = BT_TRANSPORT_LE; |
| |
| // Check CID is valid and registered |
| if ( (fixed_cid < L2CAP_FIRST_FIXED_CHNL) || (fixed_cid > L2CAP_LAST_FIXED_CHNL) |
| || (l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb == NULL) ) |
| { |
| L2CAP_TRACE_ERROR ("L2CA_SendFixedChnlData() Invalid CID: 0x%04x", fixed_cid); |
| osi_free(p_buf); |
| return (L2CAP_DW_FAILED); |
| } |
| |
| // Fail if BT is not yet up |
| if (!BTM_IsDeviceUp()) |
| { |
| L2CAP_TRACE_WARNING ("L2CA_SendFixedChnlData(0x%04x) - BTU not ready", fixed_cid); |
| osi_free(p_buf); |
| return (L2CAP_DW_FAILED); |
| } |
| |
| // We need to have a link up |
| if ((p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda, transport)) == NULL || |
| /* if link is disconnecting, also report data sending failure */ |
| p_lcb->link_state == LST_DISCONNECTING) |
| { |
| L2CAP_TRACE_WARNING ("L2CA_SendFixedChnlData(0x%04x) - no LCB", fixed_cid); |
| osi_free(p_buf); |
| return (L2CAP_DW_FAILED); |
| } |
| |
| tL2C_BLE_FIXED_CHNLS_MASK peer_channel_mask; |
| |
| // Select peer channels mask to use depending on transport |
| if (transport == BT_TRANSPORT_LE) |
| peer_channel_mask = l2cb.l2c_ble_fixed_chnls_mask; |
| else |
| peer_channel_mask = p_lcb->peer_chnl_mask[0]; |
| |
| if ((peer_channel_mask & (1 << fixed_cid)) == 0) |
| { |
| L2CAP_TRACE_WARNING ("L2CA_SendFixedChnlData() - peer does not support fixed chnl: 0x%04x", fixed_cid); |
| osi_free(p_buf); |
| return (L2CAP_DW_FAILED); |
| } |
| |
| p_buf->event = 0; |
| p_buf->layer_specific = L2CAP_FLUSHABLE_CH_BASED; |
| |
| if (!p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]) |
| { |
| if (!l2cu_initialize_fixed_ccb (p_lcb, fixed_cid, &l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].fixed_chnl_opts)) |
| { |
| L2CAP_TRACE_WARNING ("L2CA_SendFixedChnlData() - no CCB for chnl: 0x%4x", fixed_cid); |
| osi_free(p_buf); |
| return (L2CAP_DW_FAILED); |
| } |
| } |
| |
| // If already congested, do not accept any more packets |
| if (p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]->cong_sent) |
| { |
| L2CAP_TRACE_ERROR ("L2CAP - CID: 0x%04x cannot send, already congested \ |
| xmit_hold_q.count: %u buff_quota: %u", fixed_cid, |
| fixed_queue_length(p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]->xmit_hold_q), |
| p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]->buff_quota); |
| osi_free(p_buf); |
| return (L2CAP_DW_FAILED); |
| } |
| |
| l2c_enqueue_peer_data (p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL], p_buf); |
| |
| l2c_link_check_send_pkts (p_lcb, NULL, NULL); |
| |
| // If there is no dynamic CCB on the link, restart the idle timer each time something is sent |
| if (p_lcb->in_use && p_lcb->link_state == LST_CONNECTED && !p_lcb->ccb_queue.p_first_ccb) |
| { |
| l2cu_no_dynamic_ccbs (p_lcb); |
| } |
| |
| if (p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]->cong_sent) |
| return (L2CAP_DW_CONGESTED); |
| |
| return (L2CAP_DW_SUCCESS); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_RemoveFixedChnl |
| ** |
| ** Description Remove a fixed channel to a remote device. |
| ** |
| ** Parameters: Fixed CID |
| ** BD Address of remote |
| ** Idle timeout to use (or 0xFFFF if don't care) |
| ** |
| ** Return value: true if channel removed |
| ** |
| *******************************************************************************/ |
| bool L2CA_RemoveFixedChnl (uint16_t fixed_cid, BD_ADDR rem_bda) |
| { |
| tL2C_LCB *p_lcb; |
| tL2C_CCB *p_ccb; |
| tBT_TRANSPORT transport = BT_TRANSPORT_BR_EDR; |
| |
| /* Check CID is valid and registered */ |
| if ( (fixed_cid < L2CAP_FIRST_FIXED_CHNL) || (fixed_cid > L2CAP_LAST_FIXED_CHNL) |
| || (l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb == NULL) ) |
| { |
| L2CAP_TRACE_ERROR ("L2CA_RemoveFixedChnl() Invalid CID: 0x%04x", fixed_cid); |
| return (false); |
| } |
| |
| if (fixed_cid >= L2CAP_ATT_CID && fixed_cid <= L2CAP_SMP_CID) |
| transport = BT_TRANSPORT_LE; |
| |
| /* Is a fixed channel connected to the remote BDA ?*/ |
| p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda, transport); |
| |
| if ( ((p_lcb) == NULL) || (!p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]) ) |
| { |
| L2CAP_TRACE_WARNING ("L2CA_RemoveFixedChnl() CID: 0x%04x BDA: %08x%04x not connected", fixed_cid, |
| (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]); |
| return (false); |
| } |
| |
| L2CAP_TRACE_API ("L2CA_RemoveFixedChnl() CID: 0x%04x BDA: %08x%04x", fixed_cid, |
| (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]); |
| |
| /* Release the CCB, starting an inactivity timeout on the LCB if no other CCBs exist */ |
| p_ccb = p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]; |
| |
| p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL] = NULL; |
| p_lcb->disc_reason = HCI_ERR_CONN_CAUSE_LOCAL_HOST; |
| |
| // Retain the link for a few more seconds after SMP pairing is done, since the Android |
| // platform always does service discovery after pairing is complete. This will avoid |
| // the link down (pairing is complete) and an immediate re-connection for service |
| // discovery. |
| // Some devices do not do auto advertising when link is dropped, thus fail the second |
| // connection and service discovery. |
| if ((fixed_cid == L2CAP_ATT_CID ) && !p_lcb->ccb_queue.p_first_ccb) |
| p_lcb->idle_timeout = 0; |
| |
| l2cu_release_ccb (p_ccb); |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_SetFixedChannelTout |
| ** |
| ** Description Higher layers call this function to set the idle timeout for |
| ** a fixed channel. The "idle timeout" is the amount of time that |
| ** a connection can remain up with no L2CAP channels on it. |
| ** A timeout of zero means that the connection will be torn |
| ** down immediately when the last channel is removed. |
| ** A timeout of 0xFFFF means no timeout. Values are in seconds. |
| ** A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY, |
| ** then the idle timeouts for all active l2cap links will be |
| ** changed. |
| ** |
| ** Returns true if command succeeded, false if failed |
| ** |
| *******************************************************************************/ |
| bool L2CA_SetFixedChannelTout (BD_ADDR rem_bda, uint16_t fixed_cid, uint16_t idle_tout) |
| { |
| tL2C_LCB *p_lcb; |
| tBT_TRANSPORT transport = BT_TRANSPORT_BR_EDR; |
| |
| if (fixed_cid >= L2CAP_ATT_CID && fixed_cid <= L2CAP_SMP_CID) |
| transport = BT_TRANSPORT_LE; |
| |
| /* Is a fixed channel connected to the remote BDA ?*/ |
| p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda, transport); |
| if ( ((p_lcb) == NULL) || (!p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]) ) |
| { |
| L2CAP_TRACE_WARNING ("L2CA_SetFixedChannelTout() CID: 0x%04x BDA: %08x%04x not connected", fixed_cid, |
| (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]); |
| return (false); |
| } |
| |
| p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]->fixed_chnl_idle_tout = idle_tout; |
| |
| if (p_lcb->in_use && p_lcb->link_state == LST_CONNECTED && !p_lcb->ccb_queue.p_first_ccb) |
| { |
| /* If there are no dynamic CCBs, (re)start the idle timer in case we changed it */ |
| l2cu_no_dynamic_ccbs (p_lcb); |
| } |
| |
| return true; |
| } |
| |
| #endif /* #if (L2CAP_NUM_FIXED_CHNLS > 0) */ |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_GetCurrentConfig |
| ** |
| ** Description This function returns configurations of L2CAP channel |
| ** pp_our_cfg : pointer of our saved configuration options |
| ** p_our_cfg_bits : valid config in bitmap |
| ** pp_peer_cfg: pointer of peer's saved configuration options |
| ** p_peer_cfg_bits : valid config in bitmap |
| ** |
| ** Returns true if successful |
| ** |
| *******************************************************************************/ |
| bool L2CA_GetCurrentConfig (uint16_t lcid, |
| tL2CAP_CFG_INFO **pp_our_cfg, tL2CAP_CH_CFG_BITS *p_our_cfg_bits, |
| tL2CAP_CFG_INFO **pp_peer_cfg, tL2CAP_CH_CFG_BITS *p_peer_cfg_bits) |
| { |
| tL2C_CCB *p_ccb; |
| |
| L2CAP_TRACE_API ("L2CA_GetCurrentConfig() CID: 0x%04x", lcid); |
| |
| p_ccb = l2cu_find_ccb_by_cid(NULL, lcid); |
| |
| if (p_ccb) |
| { |
| *pp_our_cfg = &(p_ccb->our_cfg); |
| |
| /* convert valid config items into bitmap */ |
| *p_our_cfg_bits = 0; |
| if (p_ccb->our_cfg.mtu_present) |
| *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_MTU; |
| if (p_ccb->our_cfg.qos_present) |
| *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_QOS; |
| if (p_ccb->our_cfg.flush_to_present) |
| *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_FLUSH_TO; |
| if (p_ccb->our_cfg.fcr_present) |
| *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_FCR; |
| if (p_ccb->our_cfg.fcs_present) |
| *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_FCS; |
| if (p_ccb->our_cfg.ext_flow_spec_present) |
| *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_EXT_FLOW_SPEC; |
| |
| *pp_peer_cfg = &(p_ccb->peer_cfg); |
| *p_peer_cfg_bits = p_ccb->peer_cfg_bits; |
| |
| return true; |
| } |
| else |
| { |
| L2CAP_TRACE_ERROR ("No CCB for CID:0x%04x", lcid); |
| return false; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_GetConnectionConfig |
| ** |
| ** Description This function returns configurations of L2CAP channel |
| ** pp_l2c_ccb : pointer to this channels L2CAP ccb data. |
| ** |
| ** Returns true if successful |
| ** |
| *******************************************************************************/ |
| bool L2CA_GetConnectionConfig(uint16_t lcid, uint16_t *mtu, uint16_t *rcid, uint16_t *handle) |
| { |
| tL2C_CCB *p_ccb = l2cu_find_ccb_by_cid(NULL, lcid);; |
| |
| L2CAP_TRACE_API ("%s CID: 0x%04x", __func__, lcid); |
| |
| if (p_ccb) |
| { |
| *mtu = L2CAP_MTU_SIZE; |
| if (p_ccb->our_cfg.mtu_present) |
| *mtu = p_ccb->our_cfg.mtu; |
| |
| *rcid = p_ccb->remote_cid; |
| *handle= p_ccb->p_lcb->handle; |
| return true; |
| } |
| |
| L2CAP_TRACE_ERROR ("%s No CCB for CID:0x%04x", __func__, lcid); |
| return false; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_RegForNoCPEvt |
| ** |
| ** Description Register callback for Number of Completed Packets event. |
| ** |
| ** Input Param p_cb - callback for Number of completed packets event |
| ** p_bda - BT address of remote device |
| ** |
| ** Returns true if registered OK, else false |
| ** |
| *******************************************************************************/ |
| bool L2CA_RegForNoCPEvt(tL2CA_NOCP_CB *p_cb, BD_ADDR p_bda) |
| { |
| tL2C_LCB *p_lcb; |
| |
| /* Find the link that is associated with this remote bdaddr */ |
| p_lcb = l2cu_find_lcb_by_bd_addr (p_bda, BT_TRANSPORT_BR_EDR); |
| |
| /* If no link for this handle, nothing to do. */ |
| if (!p_lcb) |
| return false; |
| |
| p_lcb->p_nocp_cb = p_cb; |
| |
| return true; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_DataWrite |
| ** |
| ** Description Higher layers call this function to write data. |
| ** |
| ** Returns L2CAP_DW_SUCCESS, if data accepted, else false |
| ** L2CAP_DW_CONGESTED, if data accepted and the channel is congested |
| ** L2CAP_DW_FAILED, if error |
| ** |
| *******************************************************************************/ |
| uint8_t L2CA_DataWrite (uint16_t cid, BT_HDR *p_data) |
| { |
| L2CAP_TRACE_API ("L2CA_DataWrite() CID: 0x%04x Len: %d", cid, p_data->len); |
| return l2c_data_write (cid, p_data, L2CAP_FLUSHABLE_CH_BASED); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_SetChnlFlushability |
| ** |
| ** Description Higher layers call this function to set a channels |
| ** flushability flags |
| ** |
| ** Returns true if CID found, else false |
| ** |
| *******************************************************************************/ |
| bool L2CA_SetChnlFlushability (uint16_t cid, bool is_flushable) |
| { |
| #if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE) |
| |
| tL2C_CCB *p_ccb; |
| |
| /* Find the channel control block. We don't know the link it is on. */ |
| p_ccb = l2cu_find_ccb_by_cid(NULL, cid); |
| if (p_ccb == NULL) |
| { |
| L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_SetChnlFlushability, CID: %d", cid); |
| return (false); |
| } |
| |
| p_ccb->is_flushable = is_flushable; |
| |
| L2CAP_TRACE_API ("L2CA_SetChnlFlushability() CID: 0x%04x is_flushable: %d", cid, is_flushable); |
| |
| #endif |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_DataWriteEx |
| ** |
| ** Description Higher layers call this function to write data with extended |
| ** flags. |
| ** flags : L2CAP_FLUSHABLE_CH_BASED |
| ** L2CAP_FLUSHABLE_PKT |
| ** L2CAP_NON_FLUSHABLE_PKT |
| ** |
| ** Returns L2CAP_DW_SUCCESS, if data accepted, else false |
| ** L2CAP_DW_CONGESTED, if data accepted and the channel is congested |
| ** L2CAP_DW_FAILED, if error |
| ** |
| *******************************************************************************/ |
| uint8_t L2CA_DataWriteEx (uint16_t cid, BT_HDR *p_data, uint16_t flags) |
| { |
| L2CAP_TRACE_API ("L2CA_DataWriteEx() CID: 0x%04x Len: %d Flags:0x%04X", |
| cid, p_data->len, flags); |
| return l2c_data_write (cid, p_data, flags); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function L2CA_FlushChannel |
| ** |
| ** Description This function flushes none, some or all buffers queued up |
| ** for xmission for a particular CID. If called with |
| ** L2CAP_FLUSH_CHANS_GET (0), it simply returns the number |
| ** of buffers queued for that CID L2CAP_FLUSH_CHANS_ALL (0xffff) |
| ** flushes all buffers. All other values specifies the maximum |
| ** buffers to flush. |
| ** |
| ** Returns Number of buffers left queued for that CID |
| ** |
| *******************************************************************************/ |
| uint16_t L2CA_FlushChannel (uint16_t lcid, uint16_t num_to_flush) |
| { |
| tL2C_CCB *p_ccb; |
| tL2C_LCB *p_lcb; |
| uint16_t num_left = 0, |
| num_flushed1 = 0, |
| num_flushed2 = 0; |
| |
| p_ccb = l2cu_find_ccb_by_cid(NULL, lcid); |
| |
| if ( !p_ccb || ((p_lcb = p_ccb->p_lcb) == NULL) ) |
| { |
| L2CAP_TRACE_WARNING ("L2CA_FlushChannel() abnormally returning 0 CID: 0x%04x", lcid); |
| return (0); |
| } |
| |
| if (num_to_flush != L2CAP_FLUSH_CHANS_GET) |
| { |
| L2CAP_TRACE_API ("L2CA_FlushChannel (FLUSH) CID: 0x%04x NumToFlush: %d QC: %u pFirst: 0x%08x", |
| lcid, num_to_flush, |
| fixed_queue_length(p_ccb->xmit_hold_q), |
| fixed_queue_try_peek_first(p_ccb->xmit_hold_q)); |
| } |
| else |
| { |
| L2CAP_TRACE_API ("L2CA_FlushChannel (QUERY) CID: 0x%04x", lcid); |
| } |
| |
| /* Cannot flush eRTM buffers once they have a sequence number */ |
| if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_ERTM_MODE) |
| { |
| #if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE) |
| if (num_to_flush != L2CAP_FLUSH_CHANS_GET) |
| { |
| /* If the controller supports enhanced flush, flush the data queued at the controller */ |
| if ( (HCI_NON_FLUSHABLE_PB_SUPPORTED(BTM_ReadLocalFeatures ())) |
| && (BTM_GetNumScoLinks() == 0) ) |
| { |
| if ( l2cb.is_flush_active == false ) |
| { |
| l2cb.is_flush_active = true; |
| |
| /* The only packet type defined - 0 - Automatically-Flushable Only */ |
| btsnd_hcic_enhanced_flush (p_lcb->handle, 0); |
| } |
| } |
| } |
| #endif |
| |
| // Iterate though list and flush the amount requested from |
| // the transmit data queue that satisfy the layer and event conditions. |
| for (const list_node_t *node = list_begin(p_lcb->link_xmit_data_q); |
| (num_to_flush > 0) && node != list_end(p_lcb->link_xmit_data_q);) { |
| BT_HDR *p_buf = (BT_HDR *)list_node(node); |
| node = list_next(node); |
| if ((p_buf->layer_specific == 0) && (p_buf->event == lcid)) { |
| num_to_flush--; |
| num_flushed1++; |
| |
| list_remove(p_lcb->link_xmit_data_q, p_buf); |
| osi_free(p_buf); |
| } |
| } |
| } |
| |
| /* If needed, flush buffers in the CCB xmit hold queue */ |
| while ( (num_to_flush != 0) && (!fixed_queue_is_empty(p_ccb->xmit_hold_q))) |
| { |
| BT_HDR *p_buf = (BT_HDR *)fixed_queue_try_dequeue(p_ccb->xmit_hold_q); |
| osi_free(p_buf); |
| num_to_flush--; |
| num_flushed2++; |
| } |
| |
| /* If app needs to track all packets, call him */ |
| if ( (p_ccb->p_rcb) && (p_ccb->p_rcb->api.pL2CA_TxComplete_Cb) && (num_flushed2) ) |
| (*p_ccb->p_rcb->api.pL2CA_TxComplete_Cb)(p_ccb->local_cid, num_flushed2); |
| |
| /* Now count how many are left */ |
| for (const list_node_t *node = list_begin(p_lcb->link_xmit_data_q); |
| node != list_end(p_lcb->link_xmit_data_q); |
| node = list_next(node)) { |
| |
| BT_HDR *p_buf = (BT_HDR *)list_node(node); |
| if (p_buf->event == lcid) |
| num_left++; |
| } |
| |
| /* Add in the number in the CCB xmit queue */ |
| num_left += fixed_queue_length(p_ccb->xmit_hold_q); |
| |
| /* Return the local number of buffers left for the CID */ |
| L2CAP_TRACE_DEBUG ("L2CA_FlushChannel() flushed: %u + %u, num_left: %u", num_flushed1, num_flushed2, num_left); |
| |
| /* If we were congested, and now we are not, tell the app */ |
| l2cu_check_channel_congestion (p_ccb); |
| |
| return (num_left); |
| } |
| |