| /****************************************************************************** |
| * |
| * Copyright (C) 2009-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /************************************************************************************ |
| * |
| * Filename: btif_hf.c |
| * |
| * Description: Handsfree Profile Bluetooth Interface |
| * |
| * |
| ***********************************************************************************/ |
| |
| #include <hardware/bluetooth.h> |
| #include <hardware/bt_hf.h> |
| #include <stdlib.h> |
| |
| #define LOG_TAG "bt_btif_hf" |
| #include "btif_common.h" |
| #include "btif_util.h" |
| #include "btif_profile_queue.h" |
| |
| #include "btcore/include/bdaddr.h" |
| #include "bta_ag_api.h" |
| |
| /************************************************************************************ |
| ** Constants & Macros |
| ************************************************************************************/ |
| #ifndef BTIF_HSAG_SERVICE_NAME |
| #define BTIF_HSAG_SERVICE_NAME ("Headset Gateway") |
| #endif |
| |
| #ifndef BTIF_HFAG_SERVICE_NAME |
| #define BTIF_HFAG_SERVICE_NAME ("Handsfree Gateway") |
| #endif |
| |
| #ifndef BTIF_HF_SERVICES |
| #define BTIF_HF_SERVICES (BTA_HSP_SERVICE_MASK | BTA_HFP_SERVICE_MASK ) |
| #endif |
| |
| #ifndef BTIF_HF_SERVICE_NAMES |
| #define BTIF_HF_SERVICE_NAMES {BTIF_HSAG_SERVICE_NAME , BTIF_HFAG_SERVICE_NAME} |
| #endif |
| |
| #ifndef BTIF_HF_SECURITY |
| #define BTIF_HF_SECURITY (BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT) |
| #endif |
| |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| #ifndef BTIF_HF_FEATURES |
| #define BTIF_HF_FEATURES ( BTA_AG_FEAT_3WAY | \ |
| BTA_AG_FEAT_ECNR | \ |
| BTA_AG_FEAT_REJECT | \ |
| BTA_AG_FEAT_ECS | \ |
| BTA_AG_FEAT_EXTERR | \ |
| BTA_AG_FEAT_BTRH | \ |
| BTA_AG_FEAT_VREC | \ |
| BTA_AG_FEAT_CODEC |\ |
| BTA_AG_FEAT_UNAT) |
| #endif |
| #else |
| #ifndef BTIF_HF_FEATURES |
| #define BTIF_HF_FEATURES ( BTA_AG_FEAT_3WAY | \ |
| BTA_AG_FEAT_ECNR | \ |
| BTA_AG_FEAT_REJECT | \ |
| BTA_AG_FEAT_ECS | \ |
| BTA_AG_FEAT_EXTERR | \ |
| BTA_AG_FEAT_BTRH | \ |
| BTA_AG_FEAT_VREC | \ |
| BTA_AG_FEAT_UNAT) |
| #endif |
| #endif |
| |
| #define BTIF_HF_CALL_END_TIMEOUT 6 |
| |
| #define BTIF_HF_INVALID_IDX -1 |
| |
| /* Number of BTIF-HF control blocks */ |
| #define BTIF_HF_NUM_CB 2 |
| |
| /* Max HF clients supported from App */ |
| UINT16 btif_max_hf_clients = -1; |
| |
| /* HF app ids for service registration */ |
| typedef enum { |
| BTIF_HF_ID_1 = 0, |
| BTIF_HF_ID_2, |
| #if (BTIF_HF_NUM_CB == 3) |
| BTIF_HF_ID_3 |
| #endif |
| } bthf_hf_id_t; |
| |
| UINT16 bthf_hf_id[BTIF_HF_NUM_CB] = {BTIF_HF_ID_1, BTIF_HF_ID_2, |
| #if (BTIF_HF_NUM_CB == 3) |
| BTIF_HF_ID_3 |
| #endif |
| }; |
| |
| /************************************************************************************ |
| ** Local type definitions |
| ************************************************************************************/ |
| |
| /************************************************************************************ |
| ** Static variables |
| ************************************************************************************/ |
| static bthf_callbacks_t *bt_hf_callbacks = NULL; |
| static int hf_idx = BTIF_HF_INVALID_IDX; |
| |
| #define CHECK_BTHF_INIT() if (bt_hf_callbacks == NULL)\ |
| {\ |
| BTIF_TRACE_WARNING("BTHF: %s: BTHF not initialized", __FUNCTION__);\ |
| return BT_STATUS_NOT_READY;\ |
| }\ |
| else\ |
| {\ |
| BTIF_TRACE_EVENT("BTHF: %s", __FUNCTION__);\ |
| } |
| |
| #define CHECK_BTHF_SLC_CONNECTED() if (bt_hf_callbacks == NULL)\ |
| {\ |
| BTIF_TRACE_WARNING("BTHF: %s: BTHF not initialized", __FUNCTION__);\ |
| return BT_STATUS_NOT_READY;\ |
| }\ |
| else if (btif_hf_cb.state != BTHF_CONNECTION_STATE_SLC_CONNECTED)\ |
| {\ |
| BTIF_TRACE_WARNING("BTHF: %s: SLC connection not up. state=%s", __FUNCTION__, dump_hf_conn_state(btif_hf_cb.state));\ |
| return BT_STATUS_NOT_READY;\ |
| }\ |
| else\ |
| {\ |
| BTIF_TRACE_EVENT("BTHF: %s", __FUNCTION__);\ |
| } |
| |
| /* BTIF-HF control block to map bdaddr to BTA handle */ |
| typedef struct _btif_hf_cb |
| { |
| UINT16 handle; |
| bt_bdaddr_t connected_bda; |
| bthf_connection_state_t state; |
| bthf_vr_state_t vr_state; |
| tBTA_AG_PEER_FEAT peer_feat; |
| int num_active; |
| int num_held; |
| struct timespec call_end_timestamp; |
| struct timespec connected_timestamp; |
| bthf_call_state_t call_setup_state; |
| } btif_hf_cb_t; |
| |
| static btif_hf_cb_t btif_hf_cb[BTIF_HF_NUM_CB]; |
| |
| |
| /************************************************************************************ |
| ** Static functions |
| ************************************************************************************/ |
| |
| /************************************************************************************ |
| ** Externs |
| ************************************************************************************/ |
| /* By default, even though codec negotiation is enabled, we will not use WBS as the default |
| * codec unless this variable is set to TRUE. |
| */ |
| #ifndef BTIF_HF_WBS_PREFERRED |
| #define BTIF_HF_WBS_PREFERRED FALSE |
| #endif |
| |
| BOOLEAN btif_conf_hf_force_wbs = BTIF_HF_WBS_PREFERRED; |
| |
| /************************************************************************************ |
| ** Functions |
| ************************************************************************************/ |
| |
| /******************************************************************************* |
| ** |
| ** Function is_connected |
| ** |
| ** Description Internal function to check if HF is connected |
| ** |
| ** Returns TRUE if connected |
| ** |
| *******************************************************************************/ |
| static BOOLEAN is_connected(bt_bdaddr_t *bd_addr) |
| { |
| int i; |
| for (i = 0; i < btif_max_hf_clients; ++i) |
| { |
| if (((btif_hf_cb[i].state == BTHF_CONNECTION_STATE_CONNECTED) || |
| (btif_hf_cb[i].state == BTHF_CONNECTION_STATE_SLC_CONNECTED)) && |
| ((bd_addr == NULL) || (bdcmp(bd_addr->address, |
| btif_hf_cb[i].connected_bda.address) == 0))) |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_hf_idx_by_bdaddr |
| ** |
| ** Description Internal function to get idx by bdaddr |
| ** |
| ** Returns idx |
| ** |
| *******************************************************************************/ |
| static int btif_hf_idx_by_bdaddr(bt_bdaddr_t *bd_addr) |
| { |
| int i; |
| for (i = 0; i < btif_max_hf_clients; ++i) |
| { |
| if ((bdcmp(bd_addr->address, |
| btif_hf_cb[i].connected_bda.address) == 0)) |
| return i; |
| } |
| return BTIF_HF_INVALID_IDX; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function callstate_to_callsetup |
| ** |
| ** Description Converts HAL call state to BTA call setup indicator value |
| ** |
| ** Returns BTA call indicator value |
| ** |
| *******************************************************************************/ |
| static UINT8 callstate_to_callsetup(bthf_call_state_t call_state) |
| { |
| UINT8 call_setup = 0; |
| if (call_state == BTHF_CALL_STATE_INCOMING) |
| call_setup = 1; |
| if (call_state == BTHF_CALL_STATE_DIALING) |
| call_setup = 2; |
| if (call_state == BTHF_CALL_STATE_ALERTING) |
| call_setup = 3; |
| |
| return call_setup; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function send_at_result |
| ** |
| ** Description Send AT result code (OK/ERROR) |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void send_at_result(UINT8 ok_flag, UINT16 errcode, int idx) |
| { |
| tBTA_AG_RES_DATA ag_res; |
| memset (&ag_res, 0, sizeof (ag_res)); |
| |
| ag_res.ok_flag = ok_flag; |
| if (ok_flag == BTA_AG_OK_ERROR) |
| { |
| ag_res.errcode = errcode; |
| } |
| |
| BTA_AgResult (btif_hf_cb[idx].handle, BTA_AG_UNAT_RES, &ag_res); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function send_indicator_update |
| ** |
| ** Description Send indicator update (CIEV) |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void send_indicator_update (UINT16 indicator, UINT16 value) |
| { |
| tBTA_AG_RES_DATA ag_res; |
| |
| memset(&ag_res, 0, sizeof(tBTA_AG_RES_DATA)); |
| ag_res.ind.id = indicator; |
| ag_res.ind.value = value; |
| |
| BTA_AgResult(BTA_AG_HANDLE_ALL, BTA_AG_IND_RES, &ag_res); |
| } |
| |
| void clear_phone_state_multihf(int idx) |
| { |
| btif_hf_cb[idx].call_setup_state = BTHF_CALL_STATE_IDLE; |
| btif_hf_cb[idx].num_active = btif_hf_cb[idx].num_held = 0; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_hf_latest_connected_idx |
| ** |
| ** Description Returns idx for latest connected HF |
| ** |
| ** Returns int |
| ** |
| *******************************************************************************/ |
| static int btif_hf_latest_connected_idx() |
| { |
| struct timespec now, conn_time_delta; |
| int latest_conn_idx = BTIF_HF_INVALID_IDX, i; |
| |
| clock_gettime(CLOCK_MONOTONIC, &now); |
| conn_time_delta.tv_sec = now.tv_sec; |
| |
| for (i = 0; i < btif_max_hf_clients; i++) |
| { |
| if (btif_hf_cb[i].state == BTHF_CONNECTION_STATE_SLC_CONNECTED) |
| { |
| if ((now.tv_sec - btif_hf_cb[i].connected_timestamp.tv_sec) |
| < conn_time_delta.tv_sec) |
| { |
| conn_time_delta.tv_sec = |
| now.tv_sec - btif_hf_cb[i].connected_timestamp.tv_sec; |
| latest_conn_idx = i; |
| } |
| } |
| } |
| return latest_conn_idx; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_hf_check_if_slc_connected |
| ** |
| ** Description Returns BT_STATUS_SUCCESS if SLC is up for any HF |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t btif_hf_check_if_slc_connected() |
| { |
| if (bt_hf_callbacks == NULL) |
| { |
| BTIF_TRACE_WARNING("BTHF: %s: BTHF not initialized", __FUNCTION__); |
| return BT_STATUS_NOT_READY; |
| } |
| else |
| { |
| int i; |
| for (i = 0; i < btif_max_hf_clients; i++) |
| { |
| if ((btif_hf_cb[i].state == BTHF_CONNECTION_STATE_SLC_CONNECTED)) |
| { |
| BTIF_TRACE_EVENT("BTHF: %s: slc connected for idx = %d", |
| __FUNCTION__, i); |
| return BT_STATUS_SUCCESS; |
| } |
| } |
| BTIF_TRACE_WARNING("BTHF: %s: No SLC connection up", __FUNCTION__); |
| return BT_STATUS_NOT_READY; |
| } |
| } |
| |
| /***************************************************************************** |
| ** Section name (Group of functions) |
| *****************************************************************************/ |
| |
| /***************************************************************************** |
| ** |
| ** btif hf api functions (no context switch) |
| ** |
| *****************************************************************************/ |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_hf_upstreams_evt |
| ** |
| ** Description Executes HF UPSTREAMS events in btif context |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void btif_hf_upstreams_evt(UINT16 event, char* p_param) |
| { |
| tBTA_AG *p_data = (tBTA_AG *)p_param; |
| bdstr_t bdstr; |
| bt_bdaddr_t addr; |
| int idx = p_data->hdr.handle - 1; |
| |
| BTIF_TRACE_DEBUG("%s: event=%s", __FUNCTION__, dump_hf_event(event)); |
| |
| switch (event) |
| { |
| case BTA_AG_ENABLE_EVT: |
| case BTA_AG_DISABLE_EVT: |
| break; |
| |
| case BTA_AG_REGISTER_EVT: |
| btif_hf_cb[idx].handle = p_data->reg.hdr.handle; |
| BTIF_TRACE_DEBUG("%s: BTA_AG_REGISTER_EVT," |
| "btif_hf_cb.handle = %d", __FUNCTION__, btif_hf_cb[idx].handle); |
| break; |
| |
| case BTA_AG_OPEN_EVT: |
| if (p_data->open.status == BTA_AG_SUCCESS) |
| { |
| bdcpy(btif_hf_cb[idx].connected_bda.address, |
| p_data->open.bd_addr); |
| btif_hf_cb[idx].state = BTHF_CONNECTION_STATE_CONNECTED; |
| btif_hf_cb[idx].peer_feat = 0; |
| clear_phone_state_multihf(idx); |
| } |
| else if (btif_hf_cb[idx].state == BTHF_CONNECTION_STATE_CONNECTING) |
| { |
| btif_hf_cb[idx].state = BTHF_CONNECTION_STATE_DISCONNECTED; |
| } |
| else |
| { |
| BTIF_TRACE_WARNING("%s: AG open failed, but another device connected. status=%d state=%d connected device=%s", |
| __FUNCTION__, p_data->open.status, btif_hf_cb[idx].state, |
| bdaddr_to_string(&btif_hf_cb[idx].connected_bda, bdstr, sizeof(bdstr))); |
| break; |
| } |
| |
| HAL_CBACK(bt_hf_callbacks, connection_state_cb, btif_hf_cb[idx].state, |
| &btif_hf_cb[idx].connected_bda); |
| |
| if (btif_hf_cb[idx].state == BTHF_CONNECTION_STATE_DISCONNECTED) |
| bdsetany(btif_hf_cb[idx].connected_bda.address); |
| |
| if (p_data->open.status != BTA_AG_SUCCESS) |
| btif_queue_advance(); |
| break; |
| |
| case BTA_AG_CLOSE_EVT: |
| btif_hf_cb[idx].connected_timestamp.tv_sec = 0; |
| btif_hf_cb[idx].state = BTHF_CONNECTION_STATE_DISCONNECTED; |
| BTIF_TRACE_DEBUG("%s: BTA_AG_CLOSE_EVT," |
| "idx = %d, btif_hf_cb.handle = %d", __FUNCTION__, idx, |
| btif_hf_cb[idx].handle); |
| HAL_CBACK(bt_hf_callbacks, connection_state_cb, btif_hf_cb[idx].state, |
| &btif_hf_cb[idx].connected_bda); |
| bdsetany(btif_hf_cb[idx].connected_bda.address); |
| btif_hf_cb[idx].peer_feat = 0; |
| clear_phone_state_multihf(idx); |
| hf_idx = btif_hf_latest_connected_idx(); |
| /* If AG_OPEN was received but SLC was not setup in a specified time (10 seconds), |
| ** then AG_CLOSE may be received. We need to advance the queue here |
| */ |
| btif_queue_advance(); |
| break; |
| |
| case BTA_AG_CONN_EVT: |
| clock_gettime(CLOCK_MONOTONIC, |
| &btif_hf_cb[idx].connected_timestamp); |
| BTIF_TRACE_DEBUG("%s: BTA_AG_CONN_EVT, idx = %d ", |
| __FUNCTION__, idx); |
| btif_hf_cb[idx].peer_feat = p_data->conn.peer_feat; |
| btif_hf_cb[idx].state = BTHF_CONNECTION_STATE_SLC_CONNECTED; |
| hf_idx = btif_hf_latest_connected_idx(); |
| |
| HAL_CBACK(bt_hf_callbacks, connection_state_cb, btif_hf_cb[idx].state, |
| &btif_hf_cb[idx].connected_bda); |
| btif_queue_advance(); |
| break; |
| |
| case BTA_AG_AUDIO_OPEN_EVT: |
| hf_idx = idx; |
| HAL_CBACK(bt_hf_callbacks, audio_state_cb, BTHF_AUDIO_STATE_CONNECTED, |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| case BTA_AG_AUDIO_CLOSE_EVT: |
| HAL_CBACK(bt_hf_callbacks, audio_state_cb, BTHF_AUDIO_STATE_DISCONNECTED, |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| /* BTA auto-responds, silently discard */ |
| case BTA_AG_SPK_EVT: |
| case BTA_AG_MIC_EVT: |
| HAL_CBACK(bt_hf_callbacks, volume_cmd_cb, |
| (event == BTA_AG_SPK_EVT) ? BTHF_VOLUME_TYPE_SPK : |
| BTHF_VOLUME_TYPE_MIC, p_data->val.num, |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| case BTA_AG_AT_A_EVT: |
| if ((btif_hf_cb[0].num_held + btif_hf_cb[0].num_active) == 0) |
| hf_idx = idx; |
| else |
| BTIF_TRACE_DEBUG("Donot set hf_idx for ATA since already in a call"); |
| |
| HAL_CBACK(bt_hf_callbacks, answer_call_cmd_cb, |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| /* Java needs to send OK/ERROR for these commands */ |
| case BTA_AG_AT_BLDN_EVT: |
| case BTA_AG_AT_D_EVT: |
| if ((btif_hf_cb[0].num_held + btif_hf_cb[0].num_active) == 0) |
| hf_idx = idx; |
| else |
| BTIF_TRACE_DEBUG("Donot set hf_idx for BLDN/D since already in a call"); |
| |
| HAL_CBACK(bt_hf_callbacks, dial_call_cmd_cb, |
| (event == BTA_AG_AT_D_EVT) ? p_data->val.str : NULL, |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| case BTA_AG_AT_CHUP_EVT: |
| HAL_CBACK(bt_hf_callbacks, hangup_call_cmd_cb, |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| case BTA_AG_AT_CIND_EVT: |
| HAL_CBACK(bt_hf_callbacks, cind_cmd_cb, |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| case BTA_AG_AT_VTS_EVT: |
| HAL_CBACK(bt_hf_callbacks, dtmf_cmd_cb, p_data->val.str[0], |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| case BTA_AG_AT_BVRA_EVT: |
| HAL_CBACK(bt_hf_callbacks, vr_cmd_cb, |
| (p_data->val.num == 1) ? BTHF_VR_STATE_STARTED : |
| BTHF_VR_STATE_STOPPED, &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| case BTA_AG_AT_NREC_EVT: |
| HAL_CBACK(bt_hf_callbacks, nrec_cmd_cb, |
| (p_data->val.num == 1) ? BTHF_NREC_START : BTHF_NREC_STOP, |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| /* TODO: Add a callback for CBC */ |
| case BTA_AG_AT_CBC_EVT: |
| break; |
| |
| case BTA_AG_AT_CKPD_EVT: |
| HAL_CBACK(bt_hf_callbacks, key_pressed_cmd_cb, |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| case BTA_AG_WBS_EVT: |
| BTIF_TRACE_DEBUG("BTA_AG_WBS_EVT Set codec status %d codec %d 1=CVSD 2=MSBC", \ |
| p_data->val.hdr.status, p_data->val.num); |
| if(p_data->val.num == BTA_AG_CODEC_CVSD) |
| { HAL_CBACK(bt_hf_callbacks, wbs_cb, BTHF_WBS_NO, &btif_hf_cb[idx].connected_bda);} |
| else if(p_data->val.num == BTA_AG_CODEC_MSBC) |
| {HAL_CBACK(bt_hf_callbacks, wbs_cb, BTHF_WBS_YES, &btif_hf_cb[idx].connected_bda);} |
| else |
| {HAL_CBACK(bt_hf_callbacks, wbs_cb, BTHF_WBS_NONE, &btif_hf_cb[idx].connected_bda);} |
| break; |
| #endif |
| /* Java needs to send OK/ERROR for these commands */ |
| case BTA_AG_AT_CHLD_EVT: |
| HAL_CBACK(bt_hf_callbacks, chld_cmd_cb, atoi(p_data->val.str), |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| case BTA_AG_AT_CLCC_EVT: |
| HAL_CBACK(bt_hf_callbacks, clcc_cmd_cb, |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| case BTA_AG_AT_COPS_EVT: |
| HAL_CBACK(bt_hf_callbacks, cops_cmd_cb, |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| case BTA_AG_AT_UNAT_EVT: |
| HAL_CBACK(bt_hf_callbacks, unknown_at_cmd_cb, p_data->val.str, |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| case BTA_AG_AT_CNUM_EVT: |
| HAL_CBACK(bt_hf_callbacks, cnum_cmd_cb, |
| &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| /* TODO: Some of these commands may need to be sent to app. For now respond with error */ |
| case BTA_AG_AT_BINP_EVT: |
| case BTA_AG_AT_BTRH_EVT: |
| send_at_result(BTA_AG_OK_ERROR, BTA_AG_ERR_OP_NOT_SUPPORTED, idx); |
| break; |
| case BTA_AG_AT_BAC_EVT: |
| BTIF_TRACE_DEBUG("AG Bitmap of peer-codecs %d", p_data->val.num); |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| /* If the peer supports mSBC and the BTIF prefferred codec is also mSBC, then |
| we should set the BTA AG Codec to mSBC. This would trigger a +BCS to mSBC at the time |
| of SCO connection establishment */ |
| if ((btif_conf_hf_force_wbs == TRUE) && (p_data->val.num & BTA_AG_CODEC_MSBC)) |
| { |
| BTIF_TRACE_EVENT("%s btif_hf override-Preferred Codec to MSBC", __FUNCTION__); |
| BTA_AgSetCodec(btif_hf_cb[idx].handle,BTA_AG_CODEC_MSBC); |
| } |
| else |
| { |
| BTIF_TRACE_EVENT("%s btif_hf override-Preferred Codec to CVSD", __FUNCTION__); |
| BTA_AgSetCodec(btif_hf_cb[idx].handle,BTA_AG_CODEC_CVSD); |
| } |
| #endif |
| break; |
| case BTA_AG_AT_BCS_EVT: |
| BTIF_TRACE_DEBUG("AG final seleded codec is %d 1=CVSD 2=MSBC", p_data->val.num); |
| /* no BTHF_WBS_NONE case, becuase HF1.6 supported device can send BCS */ |
| HAL_CBACK(bt_hf_callbacks, wbs_cb,(p_data->val.num == BTA_AG_CODEC_MSBC) ? \ |
| BTHF_WBS_YES : BTHF_WBS_NO, &btif_hf_cb[idx].connected_bda); |
| break; |
| |
| default: |
| BTIF_TRACE_WARNING("%s: Unhandled event: %d", __FUNCTION__, event); |
| break; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bte_hf_evt |
| ** |
| ** Description Switches context from BTE to BTIF for all HF events |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| |
| static void bte_hf_evt(tBTA_AG_EVT event, tBTA_AG *p_data) |
| { |
| bt_status_t status; |
| int param_len = 0; |
| |
| /* TODO: BTA sends the union members and not tBTA_AG. If using param_len=sizeof(tBTA_AG), we get a crash on memcpy */ |
| if (BTA_AG_REGISTER_EVT == event) |
| param_len = sizeof(tBTA_AG_REGISTER); |
| else if (BTA_AG_OPEN_EVT == event) |
| param_len = sizeof(tBTA_AG_OPEN); |
| else if (BTA_AG_CONN_EVT == event) |
| param_len = sizeof(tBTA_AG_CONN); |
| else if ( (BTA_AG_CLOSE_EVT == event) || (BTA_AG_AUDIO_OPEN_EVT == event) || (BTA_AG_AUDIO_CLOSE_EVT == event)) |
| param_len = sizeof(tBTA_AG_HDR); |
| else if (p_data) |
| param_len = sizeof(tBTA_AG_VAL); |
| |
| /* switch context to btif task context (copy full union size for convenience) */ |
| status = btif_transfer_context(btif_hf_upstreams_evt, (uint16_t)event, (void*)p_data, param_len, NULL); |
| |
| /* catch any failed context transfers */ |
| ASSERTC(status == BT_STATUS_SUCCESS, "context transfer failed", status); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_in_hf_generic_evt |
| ** |
| ** Description Processes generic events to be sent to JNI that are not triggered from the BTA. |
| ** Always runs in BTIF context |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void btif_in_hf_generic_evt(UINT16 event, char *p_param) |
| { |
| int idx = btif_hf_idx_by_bdaddr((bt_bdaddr_t *)p_param); |
| |
| BTIF_TRACE_EVENT("%s: event=%d", __FUNCTION__, event); |
| switch (event) { |
| case BTIF_HFP_CB_AUDIO_CONNECTING: |
| { |
| HAL_CBACK(bt_hf_callbacks, audio_state_cb, BTHF_AUDIO_STATE_CONNECTING, |
| &btif_hf_cb[idx].connected_bda); |
| } break; |
| default: |
| { |
| BTIF_TRACE_WARNING("%s : Unknown event 0x%x", __FUNCTION__, event); |
| } |
| break; |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_hf_init |
| ** |
| ** Description initializes the hf interface |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t init( bthf_callbacks_t* callbacks, int max_hf_clients) |
| { |
| BTIF_TRACE_EVENT("%s", __FUNCTION__); |
| int i; |
| |
| bt_hf_callbacks = callbacks; |
| |
| /* Invoke the enable service API to the core to set the appropriate service_id |
| * Internally, the HSP_SERVICE_ID shall also be enabled if HFP is enabled (phone) |
| * othwerwise only HSP is enabled (tablet) |
| */ |
| #if (defined(BTIF_HF_SERVICES) && (BTIF_HF_SERVICES & BTA_HFP_SERVICE_MASK)) |
| btif_enable_service(BTA_HFP_SERVICE_ID); |
| #else |
| btif_enable_service(BTA_HSP_SERVICE_ID); |
| #endif |
| |
| memset(&btif_hf_cb, 0, sizeof(btif_hf_cb)); |
| btif_max_hf_clients = max_hf_clients; |
| BTIF_TRACE_DEBUG("btif_max_hf_clients = %d", btif_max_hf_clients); |
| for (i = 0; i < btif_max_hf_clients; i++) |
| { |
| clear_phone_state_multihf(i); |
| } |
| |
| return BT_STATUS_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function connect |
| ** |
| ** Description connect to headset |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t connect_int(bt_bdaddr_t *bd_addr, uint16_t uuid) |
| { |
| CHECK_BTHF_INIT(); |
| int i; |
| for (i = 0; i < btif_max_hf_clients;) |
| { |
| if (((btif_hf_cb[i].state == BTHF_CONNECTION_STATE_CONNECTED) || |
| (btif_hf_cb[i].state == BTHF_CONNECTION_STATE_SLC_CONNECTED))) |
| i++; |
| else |
| break; |
| } |
| |
| if (i == btif_max_hf_clients) |
| return BT_STATUS_BUSY; |
| |
| if (!is_connected(bd_addr)) |
| { |
| btif_hf_cb[i].state = BTHF_CONNECTION_STATE_CONNECTING; |
| bdcpy(btif_hf_cb[i].connected_bda.address, bd_addr->address); |
| |
| BTA_AgOpen(btif_hf_cb[i].handle, btif_hf_cb[i].connected_bda.address, |
| BTIF_HF_SECURITY, BTIF_HF_SERVICES); |
| return BT_STATUS_SUCCESS; |
| } |
| |
| return BT_STATUS_BUSY; |
| } |
| |
| static bt_status_t connect( bt_bdaddr_t *bd_addr ) |
| { |
| CHECK_BTHF_INIT(); |
| return btif_queue_connect(UUID_SERVCLASS_AG_HANDSFREE, bd_addr, connect_int); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function disconnect |
| ** |
| ** Description disconnect from headset |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t disconnect( bt_bdaddr_t *bd_addr ) |
| { |
| CHECK_BTHF_INIT(); |
| |
| int idx = btif_hf_idx_by_bdaddr(bd_addr); |
| |
| if (is_connected(bd_addr) && (idx != BTIF_HF_INVALID_IDX)) |
| { |
| BTA_AgClose(btif_hf_cb[idx].handle); |
| return BT_STATUS_SUCCESS; |
| } |
| |
| return BT_STATUS_FAIL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function connect_audio |
| ** |
| ** Description create an audio connection |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t connect_audio( bt_bdaddr_t *bd_addr ) |
| { |
| CHECK_BTHF_INIT(); |
| |
| int idx = btif_hf_idx_by_bdaddr(bd_addr); |
| |
| if (is_connected(bd_addr) && (idx != BTIF_HF_INVALID_IDX)) |
| { |
| BTA_AgAudioOpen(btif_hf_cb[idx].handle); |
| |
| /* Inform the application that the audio connection has been initiated successfully */ |
| btif_transfer_context(btif_in_hf_generic_evt, BTIF_HFP_CB_AUDIO_CONNECTING, |
| (char *)bd_addr, sizeof(bt_bdaddr_t), NULL); |
| return BT_STATUS_SUCCESS; |
| } |
| |
| return BT_STATUS_FAIL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function disconnect_audio |
| ** |
| ** Description close the audio connection |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t disconnect_audio( bt_bdaddr_t *bd_addr ) |
| { |
| CHECK_BTHF_INIT(); |
| |
| int idx = btif_hf_idx_by_bdaddr(bd_addr); |
| |
| if (is_connected(bd_addr) && (idx != BTIF_HF_INVALID_IDX)) |
| { |
| BTA_AgAudioClose(btif_hf_cb[idx].handle); |
| return BT_STATUS_SUCCESS; |
| } |
| |
| return BT_STATUS_FAIL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function start_voice_recognition |
| ** |
| ** Description start voice recognition |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t start_voice_recognition(bt_bdaddr_t *bd_addr) |
| { |
| CHECK_BTHF_INIT(); |
| |
| int idx = btif_hf_idx_by_bdaddr(bd_addr); |
| |
| if (is_connected(bd_addr) && (idx != BTIF_HF_INVALID_IDX)) |
| { |
| if (btif_hf_cb[idx].peer_feat & BTA_AG_PEER_FEAT_VREC) |
| { |
| tBTA_AG_RES_DATA ag_res; |
| memset(&ag_res, 0, sizeof(ag_res)); |
| ag_res.state = 1; |
| BTA_AgResult (btif_hf_cb[idx].handle, BTA_AG_BVRA_RES, &ag_res); |
| |
| return BT_STATUS_SUCCESS; |
| } |
| else |
| { |
| return BT_STATUS_UNSUPPORTED; |
| } |
| } |
| |
| return BT_STATUS_NOT_READY; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function stop_voice_recognition |
| ** |
| ** Description stop voice recognition |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t stop_voice_recognition(bt_bdaddr_t *bd_addr) |
| { |
| CHECK_BTHF_INIT(); |
| |
| int idx = btif_hf_idx_by_bdaddr(bd_addr); |
| |
| if (is_connected(bd_addr) && (idx != BTIF_HF_INVALID_IDX)) |
| { |
| if (btif_hf_cb[idx].peer_feat & BTA_AG_PEER_FEAT_VREC) |
| { |
| tBTA_AG_RES_DATA ag_res; |
| memset(&ag_res, 0, sizeof(ag_res)); |
| ag_res.state = 0; |
| BTA_AgResult (btif_hf_cb[idx].handle, BTA_AG_BVRA_RES, &ag_res); |
| |
| return BT_STATUS_SUCCESS; |
| } |
| else |
| { |
| return BT_STATUS_UNSUPPORTED; |
| } |
| } |
| |
| return BT_STATUS_NOT_READY; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function volume_control |
| ** |
| ** Description volume control |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t volume_control(bthf_volume_type_t type, int volume, |
| bt_bdaddr_t *bd_addr) |
| { |
| CHECK_BTHF_INIT(); |
| |
| int idx = btif_hf_idx_by_bdaddr(bd_addr); |
| |
| tBTA_AG_RES_DATA ag_res; |
| memset(&ag_res, 0, sizeof(tBTA_AG_RES_DATA)); |
| if (is_connected(bd_addr) && (idx != BTIF_HF_INVALID_IDX)) |
| { |
| ag_res.num = volume; |
| BTA_AgResult(btif_hf_cb[idx].handle, |
| (type == BTHF_VOLUME_TYPE_SPK) ? BTA_AG_SPK_RES : BTA_AG_MIC_RES, |
| &ag_res); |
| return BT_STATUS_SUCCESS; |
| } |
| |
| return BT_STATUS_FAIL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function device_status_notification |
| ** |
| ** Description Combined device status change notification |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t device_status_notification(bthf_network_state_t ntk_state, |
| bthf_service_type_t svc_type, int signal, int batt_chg) |
| { |
| CHECK_BTHF_INIT(); |
| |
| if (is_connected(NULL)) |
| { |
| /* send all indicators to BTA. |
| ** BTA will make sure no duplicates are sent out |
| */ |
| send_indicator_update(BTA_AG_IND_SERVICE, |
| (ntk_state == BTHF_NETWORK_STATE_AVAILABLE) ? 1 : 0); |
| send_indicator_update(BTA_AG_IND_ROAM, |
| (svc_type == BTHF_SERVICE_TYPE_HOME) ? 0 : 1); |
| send_indicator_update(BTA_AG_IND_SIGNAL, signal); |
| send_indicator_update(BTA_AG_IND_BATTCHG, batt_chg); |
| return BT_STATUS_SUCCESS; |
| } |
| |
| return BT_STATUS_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function cops_response |
| ** |
| ** Description Response for COPS command |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t cops_response(const char *cops, bt_bdaddr_t *bd_addr) |
| { |
| CHECK_BTHF_INIT(); |
| |
| int idx = btif_hf_idx_by_bdaddr(bd_addr); |
| |
| if (is_connected(bd_addr) && (idx != BTIF_HF_INVALID_IDX)) |
| { |
| tBTA_AG_RES_DATA ag_res; |
| |
| /* Format the response */ |
| sprintf (ag_res.str, "0,0,\"%s\"", cops); |
| ag_res.ok_flag = BTA_AG_OK_DONE; |
| |
| BTA_AgResult (btif_hf_cb[idx].handle, BTA_AG_COPS_RES, &ag_res); |
| return BT_STATUS_SUCCESS; |
| } |
| return BT_STATUS_FAIL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function cind_response |
| ** |
| ** Description Response for CIND command |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t cind_response(int svc, int num_active, int num_held, |
| bthf_call_state_t call_setup_state, |
| int signal, int roam, int batt_chg, |
| bt_bdaddr_t *bd_addr) |
| { |
| CHECK_BTHF_INIT(); |
| |
| int idx = btif_hf_idx_by_bdaddr(bd_addr); |
| |
| if (is_connected(bd_addr) && (idx != BTIF_HF_INVALID_IDX)) |
| { |
| tBTA_AG_RES_DATA ag_res; |
| |
| memset (&ag_res, 0, sizeof (ag_res)); |
| /* per the errata 2043, call=1 implies atleast one call is in progress (active/held) |
| ** https://www.bluetooth.org/errata/errata_view.cfm?errata_id=2043 |
| **/ |
| sprintf (ag_res.str, "%d,%d,%d,%d,%d,%d,%d", |
| (num_active + num_held) ? 1 : 0, /* Call state */ |
| callstate_to_callsetup(call_setup_state), /* Callsetup state */ |
| svc, /* network service */ |
| signal, /* Signal strength */ |
| roam, /* Roaming indicator */ |
| batt_chg, /* Battery level */ |
| ((num_held == 0) ? 0 : ((num_active == 0) ? 2 : 1))); /* Call held */ |
| |
| BTA_AgResult (btif_hf_cb[idx].handle, BTA_AG_CIND_RES, &ag_res); |
| |
| return BT_STATUS_SUCCESS; |
| } |
| |
| return BT_STATUS_FAIL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function formatted_at_response |
| ** |
| ** Description Pre-formatted AT response, typically in response to unknown AT cmd |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t formatted_at_response(const char *rsp, bt_bdaddr_t *bd_addr) |
| { |
| CHECK_BTHF_INIT(); |
| tBTA_AG_RES_DATA ag_res; |
| int idx = btif_hf_idx_by_bdaddr(bd_addr); |
| |
| if (is_connected(bd_addr) && (idx != BTIF_HF_INVALID_IDX)) |
| { |
| /* Format the response and send */ |
| memset (&ag_res, 0, sizeof (ag_res)); |
| strncpy(ag_res.str, rsp, BTA_AG_AT_MAX_LEN); |
| BTA_AgResult (btif_hf_cb[idx].handle, BTA_AG_UNAT_RES, &ag_res); |
| |
| return BT_STATUS_SUCCESS; |
| } |
| |
| return BT_STATUS_FAIL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function at_response |
| ** |
| ** Description ok/error response |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t at_response(bthf_at_response_t response_code, |
| int error_code, bt_bdaddr_t *bd_addr) |
| { |
| CHECK_BTHF_INIT(); |
| |
| int idx = btif_hf_idx_by_bdaddr(bd_addr); |
| |
| if (is_connected(bd_addr) && (idx != BTIF_HF_INVALID_IDX)) |
| { |
| send_at_result((response_code == BTHF_AT_RESPONSE_OK) ? BTA_AG_OK_DONE |
| : BTA_AG_OK_ERROR, error_code, idx); |
| return BT_STATUS_SUCCESS; |
| } |
| |
| |
| return BT_STATUS_FAIL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function clcc_response |
| ** |
| ** Description response for CLCC command |
| ** Can be iteratively called for each call index. Call index |
| ** of 0 will be treated as NULL termination (Completes response) |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t clcc_response(int index, bthf_call_direction_t dir, |
| bthf_call_state_t state, bthf_call_mode_t mode, |
| bthf_call_mpty_type_t mpty, const char *number, |
| bthf_call_addrtype_t type, bt_bdaddr_t *bd_addr) |
| { |
| CHECK_BTHF_INIT(); |
| |
| int idx = btif_hf_idx_by_bdaddr(bd_addr); |
| |
| if (is_connected(bd_addr) && (idx != BTIF_HF_INVALID_IDX)) |
| { |
| tBTA_AG_RES_DATA ag_res; |
| int xx; |
| |
| memset (&ag_res, 0, sizeof (ag_res)); |
| |
| /* Format the response */ |
| if (index == 0) |
| { |
| ag_res.ok_flag = BTA_AG_OK_DONE; |
| } |
| else |
| { |
| BTIF_TRACE_EVENT("clcc_response: [%d] dir %d state %d mode %d number = %s type = %d", |
| index, dir, state, mode, number, type); |
| xx = sprintf (ag_res.str, "%d,%d,%d,%d,%d", |
| index, dir, state, mode, mpty); |
| |
| if (number) |
| { |
| if ((type == BTHF_CALL_ADDRTYPE_INTERNATIONAL) && (*number != '+')) |
| sprintf (&ag_res.str[xx], ",\"+%s\",%d", number, type); |
| else |
| sprintf (&ag_res.str[xx], ",\"%s\",%d", number, type); |
| } |
| } |
| BTA_AgResult (btif_hf_cb[idx].handle, BTA_AG_CLCC_RES, &ag_res); |
| |
| return BT_STATUS_SUCCESS; |
| } |
| |
| return BT_STATUS_FAIL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function phone_state_change |
| ** |
| ** Description notify of a call state change |
| ** number & type: valid only for incoming & waiting call |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| |
| static bt_status_t phone_state_change(int num_active, int num_held, bthf_call_state_t call_setup_state, |
| const char *number, bthf_call_addrtype_t type) |
| { |
| tBTA_AG_RES res = 0xff; |
| tBTA_AG_RES_DATA ag_res; |
| bt_status_t status = BT_STATUS_SUCCESS; |
| BOOLEAN activeCallUpdated = FALSE; |
| int idx, i; |
| |
| /* hf_idx is index of connected HS that sent ATA/BLDN, |
| otherwise index of latest connected HS */ |
| if (hf_idx != BTIF_HF_INVALID_IDX) |
| idx = hf_idx; |
| else |
| idx = btif_hf_latest_connected_idx(); |
| |
| BTIF_TRACE_DEBUG("phone_state_change: idx = %d", idx); |
| |
| /* Check if SLC is connected */ |
| if (btif_hf_check_if_slc_connected() != BT_STATUS_SUCCESS) |
| return BT_STATUS_NOT_READY; |
| |
| BTIF_TRACE_DEBUG("phone_state_change: num_active=%d [prev: %d] num_held=%d[prev: %d]" |
| " call_setup=%s [prev: %s]", num_active, btif_hf_cb[idx].num_active, |
| num_held, btif_hf_cb[idx].num_held, dump_hf_call_state(call_setup_state), |
| dump_hf_call_state(btif_hf_cb[idx].call_setup_state)); |
| |
| /* if all indicators are 0, send end call and return */ |
| if (num_active == 0 && num_held == 0 && call_setup_state == BTHF_CALL_STATE_IDLE) |
| { |
| BTIF_TRACE_DEBUG("%s: Phone on hook", __FUNCTION__); |
| |
| /* record call termination timestamp if there was an active/held call or |
| callsetup state > BTHF_CALL_STATE_IDLE */ |
| if ((btif_hf_cb[idx].call_setup_state != BTHF_CALL_STATE_IDLE ) || |
| (btif_hf_cb[idx].num_active) ||(btif_hf_cb[idx].num_held)) |
| { |
| BTIF_TRACE_DEBUG("%s: Record call termination timestamp", __FUNCTION__); |
| clock_gettime(CLOCK_MONOTONIC, &btif_hf_cb[0].call_end_timestamp); |
| } |
| BTA_AgResult (BTA_AG_HANDLE_ALL, BTA_AG_END_CALL_RES, NULL); |
| hf_idx = BTIF_HF_INVALID_IDX; |
| |
| /* if held call was present, reset that as well */ |
| if (btif_hf_cb[idx].num_held) |
| send_indicator_update(BTA_AG_IND_CALLHELD, 0); |
| |
| goto update_call_states; |
| } |
| |
| /* active state can change when: |
| ** 1. an outgoing/incoming call was answered |
| ** 2. an held was resumed |
| ** 3. without callsetup notifications, call became active |
| ** (3) can happen if call is active and a headset connects to us |
| ** |
| ** In the case of (3), we will have to notify the stack of an active |
| ** call, instead of sending an indicator update. This will also |
| ** force the SCO to be setup. Handle this special case here prior to |
| ** call setup handling |
| */ |
| if ( (num_active == 1) && (btif_hf_cb[idx].num_active == 0) && (btif_hf_cb[idx].num_held == 0) |
| && (btif_hf_cb[idx].call_setup_state == BTHF_CALL_STATE_IDLE) ) |
| { |
| BTIF_TRACE_DEBUG("%s: Active call notification received without call setup update", |
| __FUNCTION__); |
| |
| memset(&ag_res, 0, sizeof(tBTA_AG_RES_DATA)); |
| ag_res.audio_handle = btif_hf_cb[idx].handle; |
| res = BTA_AG_OUT_CALL_CONN_RES; |
| BTA_AgResult(BTA_AG_HANDLE_ALL, res, &ag_res); |
| activeCallUpdated = TRUE; |
| } |
| |
| /* Ringing call changed? */ |
| if (call_setup_state != btif_hf_cb[idx].call_setup_state) |
| { |
| BTIF_TRACE_DEBUG("%s: Call setup states changed. old: %s new: %s", |
| __FUNCTION__, dump_hf_call_state(btif_hf_cb[idx].call_setup_state), |
| dump_hf_call_state(call_setup_state)); |
| memset(&ag_res, 0, sizeof(tBTA_AG_RES_DATA)); |
| |
| switch (call_setup_state) |
| { |
| case BTHF_CALL_STATE_IDLE: |
| { |
| switch (btif_hf_cb[idx].call_setup_state) |
| { |
| case BTHF_CALL_STATE_INCOMING: |
| if (num_active > btif_hf_cb[idx].num_active) |
| { |
| res = BTA_AG_IN_CALL_CONN_RES; |
| ag_res.audio_handle = btif_hf_cb[idx].handle; |
| } |
| else if (num_held > btif_hf_cb[idx].num_held) |
| res = BTA_AG_IN_CALL_HELD_RES; |
| else |
| res = BTA_AG_CALL_CANCEL_RES; |
| break; |
| case BTHF_CALL_STATE_DIALING: |
| case BTHF_CALL_STATE_ALERTING: |
| if (num_active > btif_hf_cb[idx].num_active) |
| { |
| ag_res.audio_handle = BTA_AG_HANDLE_SCO_NO_CHANGE; |
| res = BTA_AG_OUT_CALL_CONN_RES; |
| } |
| else |
| res = BTA_AG_CALL_CANCEL_RES; |
| break; |
| default: |
| BTIF_TRACE_ERROR("%s: Incorrect Call setup state transition", __FUNCTION__); |
| status = BT_STATUS_PARM_INVALID; |
| break; |
| } |
| } break; |
| |
| case BTHF_CALL_STATE_INCOMING: |
| if (num_active || num_held) |
| res = BTA_AG_CALL_WAIT_RES; |
| else |
| res = BTA_AG_IN_CALL_RES; |
| if (number) |
| { |
| int xx = 0; |
| if ((type == BTHF_CALL_ADDRTYPE_INTERNATIONAL) && (*number != '+')) |
| xx = sprintf (ag_res.str, "\"+%s\"", number); |
| else |
| xx = sprintf (ag_res.str, "\"%s\"", number); |
| ag_res.num = type; |
| |
| if (res == BTA_AG_CALL_WAIT_RES) |
| sprintf(&ag_res.str[xx], ",%d", type); |
| } |
| break; |
| case BTHF_CALL_STATE_DIALING: |
| ag_res.audio_handle = btif_hf_cb[idx].handle; |
| res = BTA_AG_OUT_CALL_ORIG_RES; |
| break; |
| case BTHF_CALL_STATE_ALERTING: |
| /* if we went from idle->alert, force SCO setup here. dialing usually triggers it */ |
| if (btif_hf_cb[idx].call_setup_state == BTHF_CALL_STATE_IDLE) |
| ag_res.audio_handle = btif_hf_cb[idx].handle; |
| res = BTA_AG_OUT_CALL_ALERT_RES; |
| break; |
| default: |
| BTIF_TRACE_ERROR("%s: Incorrect new ringing call state", __FUNCTION__); |
| status = BT_STATUS_PARM_INVALID; |
| break; |
| } |
| BTIF_TRACE_DEBUG("%s: Call setup state changed. res=%d, audio_handle=%d", __FUNCTION__, res, ag_res.audio_handle); |
| |
| if (res) |
| BTA_AgResult(BTA_AG_HANDLE_ALL, res, &ag_res); |
| |
| /* if call setup is idle, we have already updated call indicator, jump out */ |
| if (call_setup_state == BTHF_CALL_STATE_IDLE) |
| { |
| /* check & update callheld */ |
| if ((num_held > 0) && (num_active > 0)) |
| send_indicator_update(BTA_AG_IND_CALLHELD, 1); |
| goto update_call_states; |
| } |
| } |
| |
| memset(&ag_res, 0, sizeof(tBTA_AG_RES_DATA)); |
| |
| /* per the errata 2043, call=1 implies atleast one call is in progress (active/held) |
| ** https://www.bluetooth.org/errata/errata_view.cfm?errata_id=2043 |
| ** Handle call indicator change |
| **/ |
| if (!activeCallUpdated && ((num_active + num_held) != |
| (btif_hf_cb[idx].num_active + btif_hf_cb[idx].num_held)) ) |
| { |
| BTIF_TRACE_DEBUG("%s: Active call states changed. old: %d new: %d", __FUNCTION__, btif_hf_cb[idx].num_active, num_active); |
| send_indicator_update(BTA_AG_IND_CALL, ((num_active + num_held) > 0) ? 1 : 0); |
| } |
| |
| /* Held Changed? */ |
| if (num_held != btif_hf_cb[idx].num_held) |
| { |
| BTIF_TRACE_DEBUG("%s: Held call states changed. old: %d new: %d", |
| __FUNCTION__, btif_hf_cb[idx].num_held, num_held); |
| send_indicator_update(BTA_AG_IND_CALLHELD, ((num_held == 0) ? 0 : ((num_active == 0) ? 2 : 1))); |
| } |
| |
| /* Calls Swapped? */ |
| if ( (call_setup_state == btif_hf_cb[idx].call_setup_state) && |
| (num_active && num_held) && |
| (num_active == btif_hf_cb[idx].num_active) && |
| (num_held == btif_hf_cb[idx].num_held) ) |
| { |
| BTIF_TRACE_DEBUG("%s: Calls swapped", __FUNCTION__); |
| send_indicator_update(BTA_AG_IND_CALLHELD, 1); |
| } |
| |
| update_call_states: |
| for (i = 0; i < btif_max_hf_clients; i++) |
| { |
| btif_hf_cb[i].num_active = num_active; |
| btif_hf_cb[i].num_held = num_held; |
| btif_hf_cb[i].call_setup_state = call_setup_state; |
| } |
| return status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_hf_call_terminated_recently |
| ** |
| ** Description Checks if a call has been terminated |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| BOOLEAN btif_hf_call_terminated_recently() |
| { |
| struct timespec now; |
| |
| clock_gettime(CLOCK_MONOTONIC, &now); |
| if (now.tv_sec < btif_hf_cb[0].call_end_timestamp.tv_sec + |
| BTIF_HF_CALL_END_TIMEOUT) |
| { |
| return TRUE; |
| } |
| else |
| { |
| btif_hf_cb[0].call_end_timestamp.tv_sec = 0; |
| return FALSE; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function cleanup |
| ** |
| ** Description Closes the HF interface |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static void cleanup( void ) |
| { |
| BTIF_TRACE_EVENT("%s", __FUNCTION__); |
| |
| if (bt_hf_callbacks) |
| { |
| btif_disable_service(BTA_HFP_SERVICE_ID); |
| bt_hf_callbacks = NULL; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function configure_wbs |
| ** |
| ** Description set to over-ride the current WBS configuration. |
| ** It will not send codec setting cmd to the controller now. |
| ** It just change the configure. |
| ** |
| ** Returns bt_status_t |
| ** |
| *******************************************************************************/ |
| static bt_status_t configure_wbs( bt_bdaddr_t *bd_addr , bthf_wbs_config_t config ) |
| { |
| CHECK_BTHF_INIT(); |
| |
| int idx = btif_hf_idx_by_bdaddr(bd_addr); |
| |
| BTIF_TRACE_EVENT("%s config is %d", __FUNCTION__,config); |
| if (config == BTHF_WBS_YES) |
| BTA_AgSetCodec(btif_hf_cb[idx].handle,BTA_AG_CODEC_MSBC); |
| else if(config == BTHF_WBS_NO) |
| BTA_AgSetCodec(btif_hf_cb[idx].handle,BTA_AG_CODEC_CVSD); |
| else |
| BTA_AgSetCodec(btif_hf_cb[idx].handle,BTA_AG_CODEC_NONE); |
| |
| return BT_STATUS_SUCCESS; |
| } |
| |
| static const bthf_interface_t bthfInterface = { |
| sizeof(bthfInterface), |
| init, |
| connect, |
| disconnect, |
| connect_audio, |
| disconnect_audio, |
| start_voice_recognition, |
| stop_voice_recognition, |
| volume_control, |
| device_status_notification, |
| cops_response, |
| cind_response, |
| formatted_at_response, |
| at_response, |
| clcc_response, |
| phone_state_change, |
| cleanup, |
| configure_wbs, |
| }; |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_hf_execute_service |
| ** |
| ** Description Initializes/Shuts down the service |
| ** |
| ** Returns BT_STATUS_SUCCESS on success, BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_hf_execute_service(BOOLEAN b_enable) |
| { |
| char * p_service_names[] = BTIF_HF_SERVICE_NAMES; |
| int i; |
| if (b_enable) |
| { |
| /* Enable and register with BTA-AG */ |
| BTA_AgEnable (BTA_AG_PARSE, bte_hf_evt); |
| for (i = 0; i < btif_max_hf_clients; i++) |
| { |
| BTA_AgRegister(BTIF_HF_SERVICES, BTIF_HF_SECURITY, |
| BTIF_HF_FEATURES, p_service_names, bthf_hf_id[i]); |
| } |
| } |
| else { |
| /* De-register AG */ |
| for (i = 0; i < btif_max_hf_clients; i++) |
| { |
| BTA_AgDeregister(btif_hf_cb[i].handle); |
| } |
| /* Disable AG */ |
| BTA_AgDisable(); |
| } |
| return BT_STATUS_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_hf_get_interface |
| ** |
| ** Description Get the hf callback interface |
| ** |
| ** Returns bthf_interface_t |
| ** |
| *******************************************************************************/ |
| const bthf_interface_t *btif_hf_get_interface() |
| { |
| BTIF_TRACE_EVENT("%s", __FUNCTION__); |
| return &bthfInterface; |
| } |