| // Copyright (c) 2013 The Chromium OS Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include "shill/cellular_capability_universal.h" |
| |
| #include <base/bind.h> |
| #include <base/stl_util.h> |
| #include <base/stringprintf.h> |
| #include <base/string_util.h> |
| #include <chromeos/dbus/service_constants.h> |
| #include <mobile_provider.h> |
| #include <ModemManager/ModemManager.h> |
| |
| #include <string> |
| #include <vector> |
| |
| #include "shill/adaptor_interfaces.h" |
| #include "shill/cellular_operator_info.h" |
| #include "shill/cellular_service.h" |
| #include "shill/dbus_properties_proxy_interface.h" |
| #include "shill/error.h" |
| #include "shill/logging.h" |
| #include "shill/pending_activation_store.h" |
| #include "shill/property_accessor.h" |
| #include "shill/proxy_factory.h" |
| |
| #ifdef MM_MODEM_CDMA_REGISTRATION_STATE_UNKNOWN |
| #error "Do not include mm-modem.h" |
| #endif |
| |
| using base::Bind; |
| using base::Closure; |
| using std::string; |
| using std::vector; |
| |
| namespace shill { |
| |
| // static |
| const char CellularCapabilityUniversal::kConnectPin[] = "pin"; |
| const char CellularCapabilityUniversal::kConnectOperatorId[] = "operator-id"; |
| const char CellularCapabilityUniversal::kConnectBands[] = "bands"; |
| const char CellularCapabilityUniversal::kConnectAllowedModes[] = |
| "allowed-modes"; |
| const char CellularCapabilityUniversal::kConnectPreferredMode[] = |
| "preferred-mode"; |
| const char CellularCapabilityUniversal::kConnectApn[] = "apn"; |
| const char CellularCapabilityUniversal::kConnectIPType[] = "ip-type"; |
| const char CellularCapabilityUniversal::kConnectUser[] = "user"; |
| const char CellularCapabilityUniversal::kConnectPassword[] = "password"; |
| const char CellularCapabilityUniversal::kConnectNumber[] = "number"; |
| const char CellularCapabilityUniversal::kConnectAllowRoaming[] = |
| "allow-roaming"; |
| const char CellularCapabilityUniversal::kConnectRMProtocol[] = "rm-protocol"; |
| const int64 |
| CellularCapabilityUniversal::kDefaultScanningOrSearchingTimeoutMilliseconds = |
| 60000; |
| const int64 |
| CellularCapabilityUniversal::kActivationRegistrationTimeoutMilliseconds = |
| 20000; |
| const char CellularCapabilityUniversal::kGenericServiceNamePrefix[] = |
| "Mobile Network"; |
| const char CellularCapabilityUniversal::kRootPath[] = "/"; |
| const char CellularCapabilityUniversal::kStatusProperty[] = "status"; |
| const char CellularCapabilityUniversal::kOperatorLongProperty[] = |
| "operator-long"; |
| const char CellularCapabilityUniversal::kOperatorShortProperty[] = |
| "operator-short"; |
| const char CellularCapabilityUniversal::kOperatorCodeProperty[] = |
| "operator-code"; |
| const char CellularCapabilityUniversal::kOperatorAccessTechnologyProperty[] = |
| "access-technology"; |
| const char CellularCapabilityUniversal::kE362ModelId[] = "E362 WWAN"; |
| const int CellularCapabilityUniversal::kSetPowerStateTimeoutMilliseconds = |
| 20000; |
| unsigned int CellularCapabilityUniversal::friendly_service_name_id_ = 0; |
| |
| |
| static const char kPhoneNumber[] = "*99#"; |
| |
| static string AccessTechnologyToString(uint32 access_technologies) { |
| if (access_technologies & MM_MODEM_ACCESS_TECHNOLOGY_LTE) |
| return flimflam::kNetworkTechnologyLte; |
| if (access_technologies & (MM_MODEM_ACCESS_TECHNOLOGY_EVDO0 | |
| MM_MODEM_ACCESS_TECHNOLOGY_EVDOA | |
| MM_MODEM_ACCESS_TECHNOLOGY_EVDOB)) |
| return flimflam::kNetworkTechnologyEvdo; |
| if (access_technologies & MM_MODEM_ACCESS_TECHNOLOGY_1XRTT) |
| return flimflam::kNetworkTechnology1Xrtt; |
| if (access_technologies & MM_MODEM_ACCESS_TECHNOLOGY_HSPA_PLUS) |
| return flimflam::kNetworkTechnologyHspaPlus; |
| if (access_technologies & (MM_MODEM_ACCESS_TECHNOLOGY_HSPA | |
| MM_MODEM_ACCESS_TECHNOLOGY_HSUPA | |
| MM_MODEM_ACCESS_TECHNOLOGY_HSDPA)) |
| return flimflam::kNetworkTechnologyHspa; |
| if (access_technologies & MM_MODEM_ACCESS_TECHNOLOGY_UMTS) |
| return flimflam::kNetworkTechnologyUmts; |
| if (access_technologies & MM_MODEM_ACCESS_TECHNOLOGY_EDGE) |
| return flimflam::kNetworkTechnologyEdge; |
| if (access_technologies & MM_MODEM_ACCESS_TECHNOLOGY_GPRS) |
| return flimflam::kNetworkTechnologyGprs; |
| if (access_technologies & (MM_MODEM_ACCESS_TECHNOLOGY_GSM_COMPACT | |
| MM_MODEM_ACCESS_TECHNOLOGY_GSM)) |
| return flimflam::kNetworkTechnologyGsm; |
| return ""; |
| } |
| |
| static string AccessTechnologyToTechnologyFamily(uint32 access_technologies) { |
| if (access_technologies & (MM_MODEM_ACCESS_TECHNOLOGY_LTE | |
| MM_MODEM_ACCESS_TECHNOLOGY_HSPA_PLUS | |
| MM_MODEM_ACCESS_TECHNOLOGY_HSPA | |
| MM_MODEM_ACCESS_TECHNOLOGY_HSUPA | |
| MM_MODEM_ACCESS_TECHNOLOGY_HSDPA | |
| MM_MODEM_ACCESS_TECHNOLOGY_UMTS | |
| MM_MODEM_ACCESS_TECHNOLOGY_EDGE | |
| MM_MODEM_ACCESS_TECHNOLOGY_GPRS | |
| MM_MODEM_ACCESS_TECHNOLOGY_GSM_COMPACT | |
| MM_MODEM_ACCESS_TECHNOLOGY_GSM)) |
| return flimflam::kTechnologyFamilyGsm; |
| if (access_technologies & (MM_MODEM_ACCESS_TECHNOLOGY_EVDO0 | |
| MM_MODEM_ACCESS_TECHNOLOGY_EVDOA | |
| MM_MODEM_ACCESS_TECHNOLOGY_EVDOB | |
| MM_MODEM_ACCESS_TECHNOLOGY_1XRTT)) |
| return flimflam::kTechnologyFamilyCdma; |
| return ""; |
| } |
| |
| CellularCapabilityUniversal::CellularCapabilityUniversal( |
| Cellular *cellular, |
| ProxyFactory *proxy_factory, |
| ModemInfo *modem_info) |
| : CellularCapability(cellular, proxy_factory, modem_info), |
| weak_ptr_factory_(this), |
| registration_state_(MM_MODEM_3GPP_REGISTRATION_STATE_UNKNOWN), |
| capabilities_(MM_MODEM_CAPABILITY_NONE), |
| current_capabilities_(MM_MODEM_CAPABILITY_NONE), |
| access_technologies_(MM_MODEM_ACCESS_TECHNOLOGY_UNKNOWN), |
| supported_modes_(MM_MODEM_MODE_NONE), |
| allowed_modes_(MM_MODEM_MODE_NONE), |
| preferred_mode_(MM_MODEM_MODE_NONE), |
| home_provider_(NULL), |
| provider_requires_roaming_(false), |
| resetting_(false), |
| scanning_supported_(false), |
| scanning_(false), |
| scanning_or_searching_(false), |
| scan_interval_(0), |
| sim_present_(false), |
| reset_done_(false), |
| scanning_or_searching_timeout_milliseconds_( |
| kDefaultScanningOrSearchingTimeoutMilliseconds), |
| activation_registration_timeout_milliseconds_( |
| kActivationRegistrationTimeoutMilliseconds) { |
| SLOG(Cellular, 2) << "Cellular capability constructed: Universal"; |
| PropertyStore *store = cellular->mutable_store(); |
| |
| store->RegisterConstString(flimflam::kCarrierProperty, &carrier_); |
| store->RegisterConstBool(flimflam::kSupportNetworkScanProperty, |
| &scanning_supported_); |
| store->RegisterConstString(flimflam::kEsnProperty, &esn_); |
| store->RegisterConstString(flimflam::kFirmwareRevisionProperty, |
| &firmware_revision_); |
| store->RegisterConstString(flimflam::kHardwareRevisionProperty, |
| &hardware_revision_); |
| store->RegisterConstString(flimflam::kImeiProperty, &imei_); |
| store->RegisterConstString(flimflam::kImsiProperty, &imsi_); |
| store->RegisterConstString(flimflam::kIccidProperty, &sim_identifier_); |
| store->RegisterConstString(flimflam::kManufacturerProperty, &manufacturer_); |
| store->RegisterConstString(flimflam::kMdnProperty, &mdn_); |
| store->RegisterConstString(flimflam::kMeidProperty, &meid_); |
| store->RegisterConstString(flimflam::kMinProperty, &min_); |
| store->RegisterConstString(flimflam::kModelIDProperty, &model_id_); |
| store->RegisterConstString(flimflam::kSelectedNetworkProperty, |
| &selected_network_); |
| store->RegisterConstStringmaps(flimflam::kFoundNetworksProperty, |
| &found_networks_); |
| store->RegisterConstBool(shill::kProviderRequiresRoamingProperty, |
| &provider_requires_roaming_); |
| store->RegisterConstBool(flimflam::kScanningProperty, |
| &scanning_or_searching_); |
| store->RegisterUint16(flimflam::kScanIntervalProperty, &scan_interval_); |
| HelpRegisterConstDerivedKeyValueStore( |
| flimflam::kSIMLockStatusProperty, |
| &CellularCapabilityUniversal::SimLockStatusToProperty); |
| store->RegisterConstString(shill::kSIMOperatorIdProperty, &operator_id_); |
| store->RegisterConstBool(shill::kSIMPresentProperty, &sim_present_); |
| store->RegisterConstStringmaps(flimflam::kCellularApnListProperty, |
| &apn_list_); |
| } |
| |
| KeyValueStore CellularCapabilityUniversal::SimLockStatusToProperty( |
| Error */*error*/) { |
| KeyValueStore status; |
| status.SetBool(flimflam::kSIMLockEnabledProperty, sim_lock_status_.enabled); |
| status.SetString(flimflam::kSIMLockTypeProperty, sim_lock_status_.lock_type); |
| status.SetUint(flimflam::kSIMLockRetriesLeftProperty, |
| sim_lock_status_.retries_left); |
| return status; |
| } |
| |
| void CellularCapabilityUniversal::HelpRegisterConstDerivedKeyValueStore( |
| const string &name, |
| KeyValueStore(CellularCapabilityUniversal::*get)(Error *error)) { |
| cellular()->mutable_store()->RegisterDerivedKeyValueStore( |
| name, |
| KeyValueStoreAccessor( |
| new CustomAccessor<CellularCapabilityUniversal, KeyValueStore>( |
| this, get, NULL))); |
| } |
| |
| void CellularCapabilityUniversal::InitProxies() { |
| modem_3gpp_proxy_.reset( |
| proxy_factory()->CreateMM1ModemModem3gppProxy(cellular()->dbus_path(), |
| cellular()->dbus_owner())); |
| modem_proxy_.reset( |
| proxy_factory()->CreateMM1ModemProxy(cellular()->dbus_path(), |
| cellular()->dbus_owner())); |
| modem_simple_proxy_.reset( |
| proxy_factory()->CreateMM1ModemSimpleProxy(cellular()->dbus_path(), |
| cellular()->dbus_owner())); |
| |
| modem_proxy_->set_state_changed_callback( |
| Bind(&CellularCapabilityUniversal::OnModemStateChangedSignal, |
| weak_ptr_factory_.GetWeakPtr())); |
| // Do not create a SIM proxy until the device is enabled because we |
| // do not yet know the object path of the sim object. |
| // TODO(jglasgow): register callbacks |
| } |
| |
| void CellularCapabilityUniversal::StartModem(Error *error, |
| const ResultCallback &callback) { |
| SLOG(Cellular, 2) << __func__; |
| InitProxies(); |
| |
| // ModemManager must be in the disabled state to accept the Enable command. |
| Cellular::ModemState state = |
| static_cast<Cellular::ModemState>(modem_proxy_->State()); |
| if (state == Cellular::kModemStateDisabled) { |
| EnableModem(error, callback); |
| } else if (!cellular()->IsUnderlyingDeviceEnabled()) { |
| SLOG(Cellular, 2) << "Enabling of modem deferred because state is " |
| << state; |
| deferred_enable_modem_callback_ = |
| Bind(&CellularCapabilityUniversal::EnableModem, |
| weak_ptr_factory_.GetWeakPtr(), static_cast<Error *>(NULL), |
| callback); |
| } else { |
| // This request cannot be completed synchronously here because a method |
| // reply requires a continuation tag that is not created until the message |
| // handler returns, see DBus-C++ ObjectAdapter::handle_message(). |
| cellular()->dispatcher()->PostTask( |
| Bind(&CellularCapabilityUniversal::Start_ModemAlreadyEnabled, |
| weak_ptr_factory_.GetWeakPtr(), callback)); |
| } |
| } |
| |
| void CellularCapabilityUniversal::EnableModem(Error *error, |
| const ResultCallback &callback) { |
| SLOG(Cellular, 2) << __func__; |
| CHECK(!callback.is_null()); |
| Error local_error(Error::kOperationInitiated); |
| modem_info()->metrics()->NotifyDeviceEnableStarted( |
| cellular()->interface_index()); |
| modem_proxy_->Enable( |
| true, |
| &local_error, |
| Bind(&CellularCapabilityUniversal::Start_EnableModemCompleted, |
| weak_ptr_factory_.GetWeakPtr(), callback), |
| kTimeoutEnable); |
| if (local_error.IsFailure()) { |
| SLOG(Cellular, 2) << __func__ << "Call to modem_proxy_->Enable() failed"; |
| } |
| if (error) { |
| error->CopyFrom(local_error); |
| } |
| } |
| |
| void CellularCapabilityUniversal::Start_ModemAlreadyEnabled( |
| const ResultCallback &callback) { |
| // Call GetProperties() here to sync up with the modem state |
| GetProperties(); |
| callback.Run(Error()); |
| } |
| |
| void CellularCapabilityUniversal::Start_EnableModemCompleted( |
| const ResultCallback &callback, const Error &error) { |
| SLOG(Cellular, 2) << __func__ << ": " << error; |
| if (error.IsFailure()) { |
| callback.Run(error); |
| return; |
| } |
| |
| // After modem is enabled, it should be possible to get properties |
| // TODO(jglasgow): handle errors from GetProperties |
| GetProperties(); |
| // We expect the modem to start scanning after it has been enabled. |
| // Change this if this behavior is no longer the case in the future. |
| modem_info()->metrics()->NotifyDeviceEnableFinished( |
| cellular()->interface_index()); |
| modem_info()->metrics()->NotifyDeviceScanStarted( |
| cellular()->interface_index()); |
| callback.Run(error); |
| } |
| |
| void CellularCapabilityUniversal::StopModem(Error *error, |
| const ResultCallback &callback) { |
| CHECK(!callback.is_null()); |
| CHECK(error); |
| Cellular::ModemState state = cellular()->modem_state(); |
| SLOG(Cellular, 2) << __func__ << "(" << state << ")"; |
| |
| if (cellular()->IsModemRegistered()) { |
| string all_bearers("/"); // "/" means all bearers. See Modemanager docs. |
| modem_simple_proxy_->Disconnect( |
| all_bearers, |
| error, |
| Bind(&CellularCapabilityUniversal::Stop_DisconnectCompleted, |
| weak_ptr_factory_.GetWeakPtr(), callback), |
| kTimeoutDisconnect); |
| if (error->IsFailure()) |
| callback.Run(*error); |
| } else { |
| Closure task = Bind(&CellularCapabilityUniversal::Stop_Disable, |
| weak_ptr_factory_.GetWeakPtr(), |
| callback); |
| cellular()->dispatcher()->PostTask(task); |
| } |
| deferred_enable_modem_callback_.Reset(); |
| } |
| |
| void CellularCapabilityUniversal::Stop_DisconnectCompleted( |
| const ResultCallback &callback, const Error &error) { |
| SLOG(Cellular, 2) << __func__; |
| |
| LOG_IF(ERROR, error.IsFailure()) << "Disconnect failed. Ignoring."; |
| Stop_Disable(callback); |
| } |
| |
| void CellularCapabilityUniversal::Stop_Disable(const ResultCallback &callback) { |
| Error error; |
| modem_info()->metrics()->NotifyDeviceDisableStarted( |
| cellular()->interface_index()); |
| modem_proxy_->Enable( |
| false, &error, |
| Bind(&CellularCapabilityUniversal::Stop_DisableCompleted, |
| weak_ptr_factory_.GetWeakPtr(), callback), |
| kTimeoutEnable); |
| if (error.IsFailure()) |
| callback.Run(error); |
| } |
| |
| void CellularCapabilityUniversal::Stop_DisableCompleted( |
| const ResultCallback &callback, const Error &error) { |
| SLOG(Cellular, 2) << __func__; |
| |
| if (error.IsSuccess()) { |
| // The modem has been successfully disabled, but we still need to power it |
| // down. |
| Stop_PowerDown(callback); |
| } else { |
| // An error occurred; terminate the disable sequence. |
| callback.Run(error); |
| } |
| } |
| |
| void CellularCapabilityUniversal::Stop_PowerDown( |
| const ResultCallback &callback) { |
| SLOG(Cellular, 2) << __func__; |
| Error error; |
| modem_proxy_->SetPowerState( |
| MM_MODEM_POWER_STATE_LOW, |
| &error, |
| Bind(&CellularCapabilityUniversal::Stop_PowerDownCompleted, |
| weak_ptr_factory_.GetWeakPtr(), callback), |
| kSetPowerStateTimeoutMilliseconds); |
| |
| if (error.IsFailure()) |
| // This really shouldn't happen, but if it does, report success, |
| // because a stop initiated power down is only called if the |
| // modem was successfully disabled, but the failure of this |
| // operation should still be propagated up as a successful disable. |
| Stop_PowerDownCompleted(callback, error); |
| } |
| |
| void CellularCapabilityUniversal::Stop_PowerDownCompleted( |
| const ResultCallback &callback, |
| const Error &error) { |
| SLOG(Cellular, 2) << __func__; |
| |
| if (error.IsFailure()) |
| SLOG(Cellular, 2) << "Ignoring error returned by SetPowerState: " << error; |
| |
| // Since the disable succeeded, if power down fails, we currently fail |
| // silently, i.e. we need to report the disable operation as having |
| // succeeded. |
| modem_info()->metrics()->NotifyDeviceDisableFinished( |
| cellular()->interface_index()); |
| ReleaseProxies(); |
| callback.Run(Error()); |
| } |
| |
| void CellularCapabilityUniversal::Connect(const DBusPropertiesMap &properties, |
| Error *error, |
| const ResultCallback &callback) { |
| SLOG(Cellular, 2) << __func__; |
| DBusPathCallback cb = Bind(&CellularCapabilityUniversal::OnConnectReply, |
| weak_ptr_factory_.GetWeakPtr(), |
| callback); |
| modem_simple_proxy_->Connect(properties, error, cb, kTimeoutConnect); |
| } |
| |
| void CellularCapabilityUniversal::Disconnect(Error *error, |
| const ResultCallback &callback) { |
| SLOG(Cellular, 2) << __func__; |
| if (bearer_path_.empty()) { |
| LOG(WARNING) << "In " << __func__ << "(): " |
| << "Ignoring attempt to disconnect without bearer"; |
| } else if (modem_simple_proxy_.get()) { |
| modem_simple_proxy_->Disconnect(bearer_path_, |
| error, |
| callback, |
| kTimeoutDisconnect); |
| } |
| } |
| |
| void CellularCapabilityUniversal::DisconnectCleanup() { |
| SLOG(Cellular, 2) << __func__; |
| } |
| |
| void CellularCapabilityUniversal::Activate(const string &carrier, |
| Error *error, |
| const ResultCallback &callback) { |
| OnUnsupportedOperation(__func__, error); |
| } |
| |
| void CellularCapabilityUniversal::OnActivationWaitForRegisterTimeout() { |
| SLOG(Cellular, 2) << __func__; |
| if (sim_identifier_.empty() || |
| modem_info()->pending_activation_store()->GetActivationState( |
| PendingActivationStore::kIdentifierICCID, |
| sim_identifier_) == PendingActivationStore::kStateActivated) { |
| SLOG(Cellular, 2) << "Modem is already scheduled to be reset."; |
| return; |
| } |
| if (IsMdnValid()) { |
| SLOG(Cellular, 2) << "MDN is valid. Already activated."; |
| return; |
| } |
| if (reset_done_) { |
| SLOG(Cellular, 2) << "Already done with reset."; |
| return; |
| } |
| |
| // Still not activated after timeout. Reset the modem. |
| SLOG(Cellular, 2) << "Still not registered after timeout. Reset directly " |
| << "to update MDN."; |
| modem_info()->pending_activation_store()->SetActivationState( |
| PendingActivationStore::kIdentifierICCID, |
| sim_identifier_, |
| PendingActivationStore::kStatePendingTimeout); |
| ResetAfterActivation(); |
| } |
| |
| void CellularCapabilityUniversal::CompleteActivation(Error *error) { |
| SLOG(Cellular, 2) << __func__; |
| |
| // Persist the ICCID as "Pending Activation". |
| // We're assuming that when this function gets called, |sim_identifier_| will |
| // be non-empty. We still check here that is non-empty, though something is |
| // wrong if it is empty. |
| if (IsMdnValid()) { |
| SLOG(Cellular, 2) << "Already acquired a valid MDN. Already activated."; |
| return; |
| } |
| |
| if (sim_identifier_.empty()) { |
| SLOG(Cellular, 2) << "SIM identifier not available. Nothing to do."; |
| return; |
| } |
| |
| // There should be a cellular service at this point. |
| if (cellular()->service().get()) |
| cellular()->service()->SetActivationState( |
| flimflam::kActivationStateActivating); |
| modem_info()->pending_activation_store()->SetActivationState( |
| PendingActivationStore::kIdentifierICCID, |
| sim_identifier_, |
| PendingActivationStore::kStatePending); |
| |
| activation_wait_for_registration_callback_.Reset( |
| Bind(&CellularCapabilityUniversal::OnActivationWaitForRegisterTimeout, |
| weak_ptr_factory_.GetWeakPtr())); |
| cellular()->dispatcher()->PostDelayedTask( |
| activation_wait_for_registration_callback_.callback(), |
| activation_registration_timeout_milliseconds_); |
| } |
| |
| void CellularCapabilityUniversal::ResetAfterActivation() { |
| SLOG(Cellular, 2) << __func__; |
| |
| // Here the initial call to Reset might fail in rare cases. Simply ignore. |
| Error error; |
| ResultCallback callback = Bind( |
| &CellularCapabilityUniversal::OnResetAfterActivationReply, |
| weak_ptr_factory_.GetWeakPtr()); |
| Reset(&error, callback); |
| if (error.IsFailure()) |
| SLOG(Cellular, 2) << "Failed to reset after activation."; |
| } |
| |
| void CellularCapabilityUniversal::OnResetAfterActivationReply( |
| const Error &error) { |
| SLOG(Cellular, 2) << __func__; |
| if (error.IsFailure()) { |
| SLOG(Cellular, 2) << "Failed to reset after activation. Try again later."; |
| // TODO(armansito): Maybe post a delayed reset task? |
| return; |
| } |
| reset_done_ = true; |
| activation_wait_for_registration_callback_.Cancel(); |
| UpdateIccidActivationState(); |
| } |
| |
| void CellularCapabilityUniversal::UpdateIccidActivationState() { |
| SLOG(Cellular, 2) << __func__; |
| |
| bool registered = |
| registration_state_ == MM_MODEM_3GPP_REGISTRATION_STATE_HOME; |
| |
| // If we have a valid MDN, the service is activated. Always try to remove |
| // the ICCID from persistence. |
| bool got_mdn = IsMdnValid(); |
| if (got_mdn && !sim_identifier_.empty()) |
| modem_info()->pending_activation_store()->RemoveEntry( |
| PendingActivationStore::kIdentifierICCID, |
| sim_identifier_); |
| |
| CellularServiceRefPtr service = cellular()->service(); |
| |
| if (!service.get()) |
| return; |
| |
| if (service->activation_state() == flimflam::kActivationStateActivated) |
| // Either no service or already activated. Nothing to do. |
| return; |
| |
| // If we have a valid MDN or we can connect to the network, then the service |
| // is activated. |
| if (got_mdn || cellular()->state() == Cellular::kStateConnected || |
| cellular()->state() == Cellular::kStateLinked) { |
| SLOG(Cellular, 2) << "Marking service as activated."; |
| service->SetActivationState(flimflam::kActivationStateActivated); |
| return; |
| } |
| |
| // If the ICCID is not available, the following logic can be delayed until it |
| // becomes available. |
| if (sim_identifier_.empty()) |
| return; |
| |
| PendingActivationStore::State state = |
| modem_info()->pending_activation_store()->GetActivationState( |
| PendingActivationStore::kIdentifierICCID, |
| sim_identifier_); |
| switch (state) { |
| case PendingActivationStore::kStatePending: |
| // Always mark the service as activating here, as the ICCID could have |
| // been unavailable earlier. |
| service->SetActivationState(flimflam::kActivationStateActivating); |
| if (reset_done_) { |
| SLOG(Cellular, 2) << "Post-payment activation reset complete."; |
| modem_info()->pending_activation_store()->SetActivationState( |
| PendingActivationStore::kIdentifierICCID, |
| sim_identifier_, |
| PendingActivationStore::kStateActivated); |
| } else if (registered) { |
| SLOG(Cellular, 2) << "Resetting modem for activation."; |
| activation_wait_for_registration_callback_.Cancel(); |
| ResetAfterActivation(); |
| } |
| break; |
| case PendingActivationStore::kStateActivated: |
| if (registered) { |
| // Trigger auto connect here. |
| SLOG(Cellular, 2) << "Modem has been reset at least once, try to " |
| << "autoconnect to force MDN to update."; |
| service->AutoConnect(); |
| } |
| break; |
| case PendingActivationStore::kStatePendingTimeout: |
| SLOG(Cellular, 2) << "Modem failed to register within timeout, but has " |
| << "been reset at least once."; |
| if (registered) { |
| SLOG(Cellular, 2) << "Registered to network, marking as activated."; |
| modem_info()->pending_activation_store()->SetActivationState( |
| PendingActivationStore::kIdentifierICCID, |
| sim_identifier_, |
| PendingActivationStore::kStateActivated); |
| service->SetActivationState(flimflam::kActivationStateActivated); |
| } |
| break; |
| case PendingActivationStore::kStateUnknown: |
| // No entry exists for this ICCID. Nothing to do. |
| break; |
| default: |
| NOTREACHED(); |
| } |
| } |
| |
| void CellularCapabilityUniversal::ReleaseProxies() { |
| SLOG(Cellular, 2) << __func__; |
| modem_3gpp_proxy_.reset(); |
| modem_proxy_.reset(); |
| modem_simple_proxy_.reset(); |
| sim_proxy_.reset(); |
| } |
| |
| void CellularCapabilityUniversal::UpdateStorageIdentifier() { |
| if (!cellular()->service().get()) |
| return; |
| |
| // Lookup the unique identifier assigned to the current network and base the |
| // service's storage identifier on it. |
| const string prefix = "cellular_" + cellular()->address() + "_"; |
| string storage_id; |
| if (!operator_id_.empty()) { |
| const CellularOperatorInfo::CellularOperator *provider = |
| modem_info()->cellular_operator_info()->GetCellularOperatorByMCCMNC( |
| operator_id_); |
| if (provider && !provider->identifier().empty()) { |
| storage_id = prefix + provider->identifier(); |
| } |
| } |
| // If the above didn't work, append IMSI, if available. |
| if (storage_id.empty() && !imsi_.empty()) { |
| storage_id = prefix + imsi_; |
| } |
| if (!storage_id.empty()) { |
| cellular()->service()->SetStorageIdentifier(storage_id); |
| } |
| } |
| |
| void CellularCapabilityUniversal::UpdateServiceActivationState() { |
| if (!cellular()->service().get()) |
| return; |
| bool activation_required = IsServiceActivationRequired(); |
| string activation_state = flimflam::kActivationStateActivated; |
| PendingActivationStore::State state = |
| modem_info()->pending_activation_store()->GetActivationState( |
| PendingActivationStore::kIdentifierICCID, |
| sim_identifier_); |
| if (!sim_identifier_.empty() && |
| (state == PendingActivationStore::kStatePending || |
| state == PendingActivationStore::kStatePendingTimeout)) |
| activation_state = flimflam::kActivationStateActivating; |
| else if (activation_required) |
| activation_state = flimflam::kActivationStateNotActivated; |
| cellular()->service()->SetActivationState(activation_state); |
| // TODO(benchan): For now, assume the cellular service is activated over |
| // a non-cellular network if service activation is required (i.e. a |
| // corresponding entry is found in the cellular operator info file). |
| // We will need to generalize this logic when migrating CDMA support from |
| // cromo to ModemManager. |
| cellular()->service()->SetActivateOverNonCellularNetwork(activation_required); |
| } |
| |
| void CellularCapabilityUniversal::OnServiceCreated() { |
| UpdateStorageIdentifier(); |
| UpdateServiceActivationState(); |
| UpdateScanningProperty(); |
| UpdateServingOperator(); |
| UpdateOLP(); |
| |
| // WORKAROUND: |
| // E362 modems on Verizon network does not properly redirect when a SIM |
| // runs out of credits, we need to enforce out-of-credits detection. |
| // TODO(thieule): Remove this workaround (crosbug.com/p/18619). |
| if (model_id_ == kE362ModelId) |
| cellular()->service()->set_enforce_out_of_credits_detection(true); |
| |
| // Make sure that the network technology is set when the service gets |
| // created, just in case. |
| cellular()->service()->SetNetworkTechnology(GetNetworkTechnologyString()); |
| } |
| |
| // Create the list of APNs to try, in the following order: |
| // - last APN that resulted in a successful connection attempt on the |
| // current network (if any) |
| // - the APN, if any, that was set by the user |
| // - the list of APNs found in the mobile broadband provider DB for the |
| // home provider associated with the current SIM |
| // - as a last resort, attempt to connect with no APN |
| void CellularCapabilityUniversal::SetupApnTryList() { |
| apn_try_list_.clear(); |
| |
| DCHECK(cellular()->service().get()); |
| const Stringmap *apn_info = cellular()->service()->GetLastGoodApn(); |
| if (apn_info) |
| apn_try_list_.push_back(*apn_info); |
| |
| apn_info = cellular()->service()->GetUserSpecifiedApn(); |
| if (apn_info) |
| apn_try_list_.push_back(*apn_info); |
| |
| apn_try_list_.insert(apn_try_list_.end(), apn_list_.begin(), apn_list_.end()); |
| } |
| |
| void CellularCapabilityUniversal::SetupConnectProperties( |
| DBusPropertiesMap *properties) { |
| SetupApnTryList(); |
| FillConnectPropertyMap(properties); |
| } |
| |
| void CellularCapabilityUniversal::FillConnectPropertyMap( |
| DBusPropertiesMap *properties) { |
| |
| // TODO(jglasgow): Is this really needed anymore? |
| (*properties)[kConnectNumber].writer().append_string( |
| kPhoneNumber); |
| |
| (*properties)[kConnectAllowRoaming].writer().append_bool( |
| AllowRoaming()); |
| |
| if (!apn_try_list_.empty()) { |
| // Leave the APN at the front of the list, so that it can be recorded |
| // if the connect attempt succeeds. |
| Stringmap apn_info = apn_try_list_.front(); |
| SLOG(Cellular, 2) << __func__ << ": Using APN " |
| << apn_info[flimflam::kApnProperty]; |
| (*properties)[kConnectApn].writer().append_string( |
| apn_info[flimflam::kApnProperty].c_str()); |
| if (ContainsKey(apn_info, flimflam::kApnUsernameProperty)) |
| (*properties)[kConnectUser].writer().append_string( |
| apn_info[flimflam::kApnUsernameProperty].c_str()); |
| if (ContainsKey(apn_info, flimflam::kApnPasswordProperty)) |
| (*properties)[kConnectPassword].writer().append_string( |
| apn_info[flimflam::kApnPasswordProperty].c_str()); |
| } |
| } |
| |
| void CellularCapabilityUniversal::OnConnectReply(const ResultCallback &callback, |
| const DBus::Path &path, |
| const Error &error) { |
| SLOG(Cellular, 2) << __func__ << "(" << error << ")"; |
| |
| CellularServiceRefPtr service = cellular()->service(); |
| if (!service) { |
| // The service could have been deleted before our Connect() request |
| // completes if the modem was enabled and then quickly disabled. |
| apn_try_list_.clear(); |
| } else if (error.IsFailure()) { |
| service->ClearLastGoodApn(); |
| // The APN that was just tried (and failed) is still at the |
| // front of the list, about to be removed. If the list is empty |
| // after that, try one last time without an APN. This may succeed |
| // with some modems in some cases. |
| if (RetriableConnectError(error) && !apn_try_list_.empty()) { |
| apn_try_list_.pop_front(); |
| SLOG(Cellular, 2) << "Connect failed with invalid APN, " |
| << apn_try_list_.size() << " remaining APNs to try"; |
| DBusPropertiesMap props; |
| FillConnectPropertyMap(&props); |
| Error error; |
| Connect(props, &error, callback); |
| return; |
| } |
| } else { |
| if (!apn_try_list_.empty()) { |
| service->SetLastGoodApn(apn_try_list_.front()); |
| apn_try_list_.clear(); |
| } |
| bearer_path_ = path; |
| } |
| |
| if (!callback.is_null()) |
| callback.Run(error); |
| |
| UpdateIccidActivationState(); |
| } |
| |
| bool CellularCapabilityUniversal::AllowRoaming() { |
| return provider_requires_roaming_ || allow_roaming_property(); |
| } |
| |
| bool CellularCapabilityUniversal::ShouldDetectOutOfCredit() const { |
| return model_id_ == kE362ModelId; |
| } |
| |
| void CellularCapabilityUniversal::GetProperties() { |
| SLOG(Cellular, 2) << __func__; |
| |
| scoped_ptr<DBusPropertiesProxyInterface> properties_proxy( |
| proxy_factory()->CreateDBusPropertiesProxy(cellular()->dbus_path(), |
| cellular()->dbus_owner())); |
| DBusPropertiesMap properties( |
| properties_proxy->GetAll(MM_DBUS_INTERFACE_MODEM)); |
| OnModemPropertiesChanged(properties, vector<string>()); |
| |
| properties = properties_proxy->GetAll(MM_DBUS_INTERFACE_MODEM_MODEM3GPP); |
| OnModem3GPPPropertiesChanged(properties, vector<string>()); |
| } |
| |
| // static |
| string CellularCapabilityUniversal::GenerateNewGenericServiceName() { |
| return base::StringPrintf("%s %u", |
| kGenericServiceNamePrefix, |
| friendly_service_name_id_++); |
| } |
| |
| string CellularCapabilityUniversal::CreateFriendlyServiceName() { |
| SLOG(Cellular, 2) << __func__ << ": " << GetRoamingStateString(); |
| |
| // If |serving_operator_| does not have an operator ID, call |
| // UpdateOperatorInfo() to use |operator_id_| as a fallback when appropriate. |
| if (serving_operator_.GetCode().empty()) { |
| UpdateOperatorInfo(); |
| } |
| |
| string name = serving_operator_.GetName(); |
| string home_provider_name = cellular()->home_provider().GetName(); |
| if (!name.empty()) { |
| // If roaming, try to show "<home-provider> | <serving-operator>", per 3GPP |
| // rules (TS 31.102 and annex A of 122.101). |
| if (registration_state_ == MM_MODEM_3GPP_REGISTRATION_STATE_ROAMING && |
| !home_provider_name.empty()) { |
| return home_provider_name + " | " + name; |
| } |
| return name; |
| } |
| if (registration_state_ == MM_MODEM_3GPP_REGISTRATION_STATE_HOME && |
| !home_provider_name.empty()) { |
| return home_provider_name; |
| } |
| if (!serving_operator_.GetCode().empty()) { |
| return "cellular_" + serving_operator_.GetCode(); |
| } |
| return GenerateNewGenericServiceName(); |
| } |
| |
| void CellularCapabilityUniversal::SetHomeProvider() { |
| SLOG(Cellular, 2) << __func__ << "(IMSI: " << imsi_ |
| << " SPN: " << spn_ << ")"; |
| |
| if (!modem_info()->provider_db()) |
| return; |
| |
| // MCCMNC can be determined either from IMSI or Operator Code. Use whichever |
| // one is available. If both were reported by the SIM, use IMSI. |
| const string &network_id = imsi_.empty() ? operator_id_ : imsi_; |
| mobile_provider *provider = mobile_provider_lookup_best_match( |
| modem_info()->provider_db(), |
| spn_.c_str(), |
| network_id.c_str()); |
| if (!provider) { |
| SLOG(Cellular, 2) << "3GPP provider not found."; |
| return; |
| } |
| |
| // Even if provider is the same as home_provider_, it is possible |
| // that the spn_ has changed. Run all the code below. |
| home_provider_ = provider; |
| provider_requires_roaming_ = home_provider_->requires_roaming; |
| Cellular::Operator oper; |
| // If Operator ID is available, use that as network code, otherwise |
| // use what was returned from the database. |
| if (!operator_id_.empty()) { |
| oper.SetCode(operator_id_); |
| } else if (provider->networks && provider->networks[0]) { |
| oper.SetCode(provider->networks[0]); |
| } |
| if (provider->country) { |
| oper.SetCountry(provider->country); |
| } |
| if (spn_.empty()) { |
| const char *name = mobile_provider_get_name(provider); |
| if (name) { |
| oper.SetName(name); |
| } |
| } else { |
| oper.SetName(spn_); |
| } |
| cellular()->set_home_provider(oper); |
| SLOG(Cellular, 2) << "Home provider: " << oper.GetCode() << ", " |
| << oper.GetName() << ", " << oper.GetCountry() |
| << (provider_requires_roaming_ ? ", roaming required" : ""); |
| InitAPNList(); |
| UpdateServiceName(); |
| } |
| |
| void CellularCapabilityUniversal::UpdateScanningProperty() { |
| // Set the Scanning property to true if there is a ongoing network scan |
| // (i.e. |scanning_| is true) or the modem is enabled but not yet registered |
| // to a network. |
| // |
| // TODO(benchan): As the Device DBus interface currently does not have a |
| // State property to indicate whether the device is being enabled, set the |
| // Scanning property to true when the modem is being enabled such that |
| // the network UI can start showing the initializing/scanning animation as |
| // soon as the modem is being enabled. |
| Cellular::ModemState modem_state = cellular()->modem_state(); |
| bool is_activated_service_waiting_for_registration = |
| ((modem_state == Cellular::kModemStateEnabled || |
| modem_state == Cellular::kModemStateSearching) && |
| !IsServiceActivationRequired()); |
| bool new_scanning_or_searching = |
| modem_state == Cellular::kModemStateEnabling || |
| is_activated_service_waiting_for_registration || |
| scanning_; |
| if (new_scanning_or_searching != scanning_or_searching_) { |
| scanning_or_searching_ = new_scanning_or_searching; |
| cellular()->adaptor()->EmitBoolChanged(flimflam::kScanningProperty, |
| new_scanning_or_searching); |
| |
| if (!scanning_or_searching_) { |
| SLOG(Cellular, 2) << "Initial network scan ended. Canceling timeout."; |
| scanning_or_searching_timeout_callback_.Cancel(); |
| } else if (scanning_or_searching_timeout_callback_.IsCancelled()) { |
| SLOG(Cellular, 2) << "Initial network scan started. Starting timeout."; |
| scanning_or_searching_timeout_callback_.Reset( |
| Bind(&CellularCapabilityUniversal::OnScanningOrSearchingTimeout, |
| weak_ptr_factory_.GetWeakPtr())); |
| cellular()->dispatcher()->PostDelayedTask( |
| scanning_or_searching_timeout_callback_.callback(), |
| scanning_or_searching_timeout_milliseconds_); |
| } |
| } |
| } |
| |
| void CellularCapabilityUniversal::OnScanningOrSearchingTimeout() { |
| SLOG(Cellular, 2) << "Initial network scan timed out. Changing " |
| << "flimflam::kScanningProperty to |false|."; |
| scanning_or_searching_ = false; |
| cellular()->adaptor()->EmitBoolChanged(flimflam::kScanningProperty, false); |
| } |
| |
| void CellularCapabilityUniversal::UpdateOLP() { |
| if (!modem_info()->cellular_operator_info()) |
| return; |
| |
| const CellularService::OLP *result = |
| modem_info()->cellular_operator_info()->GetOLPByMCCMNC(operator_id_); |
| if (!result) |
| return; |
| |
| CellularService::OLP olp; |
| olp.CopyFrom(*result); |
| string post_data = olp.GetPostData(); |
| ReplaceSubstringsAfterOffset(&post_data, 0, "${iccid}", sim_identifier_); |
| ReplaceSubstringsAfterOffset(&post_data, 0, "${imei}", imei_); |
| ReplaceSubstringsAfterOffset(&post_data, 0, "${imsi}", imsi_); |
| ReplaceSubstringsAfterOffset(&post_data, 0, "${mdn}", mdn_); |
| ReplaceSubstringsAfterOffset(&post_data, 0, "${min}", min_); |
| olp.SetPostData(post_data); |
| cellular()->service()->SetOLP(olp); |
| } |
| |
| void CellularCapabilityUniversal::UpdateServiceName() { |
| if (cellular()->service()) { |
| cellular()->service()->SetFriendlyName(CreateFriendlyServiceName()); |
| } |
| } |
| |
| void CellularCapabilityUniversal::UpdateOperatorInfo() { |
| SLOG(Cellular, 2) << __func__; |
| // TODO(armansito): Use CellularOperatorInfo here instead of |
| // mobile_provider_db. |
| |
| // Sometimes the modem fails to acquire the operator code OTA, in which case |
| // |serving_operator_| may not have an operator ID (sometimes due to service |
| // activation being required or broken modem firmware). Use |operator_id_| as |
| // a fallback when available. |operator_id_| is retrieved from the SIM card. |
| if (serving_operator_.GetCode().empty() && !operator_id_.empty()) { |
| SLOG(Cellular, 2) << "Assuming operator '" << operator_id_ |
| << "' as serving operator."; |
| serving_operator_.SetCode(operator_id_); |
| } |
| |
| const string &network_id = serving_operator_.GetCode(); |
| if (!network_id.empty()) { |
| SLOG(Cellular, 2) << "Looking up network id: " << network_id; |
| mobile_provider *provider = |
| mobile_provider_lookup_by_network(modem_info()->provider_db(), |
| network_id.c_str()); |
| if (provider) { |
| if (serving_operator_.GetName().empty()) { |
| const char *provider_name = mobile_provider_get_name(provider); |
| if (provider_name && *provider_name) { |
| serving_operator_.SetName(provider_name); |
| } |
| } |
| if (provider->country && *provider->country) { |
| serving_operator_.SetCountry(provider->country); |
| } |
| SLOG(Cellular, 2) << "Operator name: " << serving_operator_.GetName() |
| << ", country: " << serving_operator_.GetCountry(); |
| } else { |
| SLOG(Cellular, 2) << "GSM provider not found."; |
| } |
| } |
| UpdateServingOperator(); |
| } |
| |
| void CellularCapabilityUniversal::UpdateServingOperator() { |
| SLOG(Cellular, 2) << __func__; |
| if (cellular()->service().get()) { |
| cellular()->service()->SetServingOperator(serving_operator_); |
| } |
| } |
| |
| void CellularCapabilityUniversal::UpdateBearerPath() { |
| SLOG(Cellular, 2) << __func__; |
| DBusPathsCallback cb = Bind(&CellularCapabilityUniversal::OnListBearersReply, |
| weak_ptr_factory_.GetWeakPtr()); |
| Error error; |
| modem_proxy_->ListBearers(&error, cb, kTimeoutDefault); |
| } |
| |
| void CellularCapabilityUniversal::OnListBearersReply( |
| const std::vector<DBus::Path> &paths, |
| const Error &error) { |
| SLOG(Cellular, 2) << __func__ << "(" << error << ")"; |
| if (error.IsFailure()) { |
| SLOG(Cellular, 2) << "ListBearers failed with error: " << error; |
| return; |
| } |
| // Look for the first active bearer and use its path as the connected |
| // one. Right now, we don't allow more than one active bearer. |
| bool found_active = false; |
| for (size_t i = 0; i < paths.size(); ++i) { |
| const DBus::Path &path = paths[i]; |
| scoped_ptr<mm1::BearerProxyInterface> bearer_proxy( |
| proxy_factory()->CreateBearerProxy(path, cellular()->dbus_owner())); |
| bool is_active = bearer_proxy->Connected(); |
| if (is_active) { |
| if (!found_active) { |
| SLOG(Cellular, 2) << "Found active bearer \"" << path << "\"."; |
| bearer_path_ = path; |
| found_active = true; |
| } else { |
| LOG(FATAL) << "Found more than one active bearer."; |
| } |
| } |
| } |
| if (!found_active) { |
| SLOG(Cellular, 2) << "No active bearer found, clearing bearer_path_."; |
| bearer_path_.clear(); |
| } |
| } |
| |
| void CellularCapabilityUniversal::InitAPNList() { |
| SLOG(Cellular, 2) << __func__; |
| if (!home_provider_) { |
| return; |
| } |
| apn_list_.clear(); |
| for (int i = 0; i < home_provider_->num_apns; ++i) { |
| Stringmap props; |
| mobile_apn *apn = home_provider_->apns[i]; |
| if (apn->value) { |
| props[flimflam::kApnProperty] = apn->value; |
| } |
| if (apn->username) { |
| props[flimflam::kApnUsernameProperty] = apn->username; |
| } |
| if (apn->password) { |
| props[flimflam::kApnPasswordProperty] = apn->password; |
| } |
| // Find the first localized and non-localized name, if any. |
| const localized_name *lname = NULL; |
| const localized_name *name = NULL; |
| for (int j = 0; j < apn->num_names; ++j) { |
| if (apn->names[j]->lang) { |
| if (!lname) { |
| lname = apn->names[j]; |
| } |
| } else if (!name) { |
| name = apn->names[j]; |
| } |
| } |
| if (name) { |
| props[flimflam::kApnNameProperty] = name->name; |
| } |
| if (lname) { |
| props[flimflam::kApnLocalizedNameProperty] = lname->name; |
| props[flimflam::kApnLanguageProperty] = lname->lang; |
| } |
| apn_list_.push_back(props); |
| } |
| if (cellular()->adaptor()) { |
| cellular()->adaptor()->EmitStringmapsChanged( |
| flimflam::kCellularApnListProperty, apn_list_); |
| } else { |
| LOG(ERROR) << "Null RPC service adaptor."; |
| } |
| } |
| |
| bool CellularCapabilityUniversal::IsServiceActivationRequired() const { |
| if (!sim_identifier_.empty() && |
| modem_info()->pending_activation_store()->GetActivationState( |
| PendingActivationStore::kIdentifierICCID, |
| sim_identifier_) != PendingActivationStore::kStateUnknown) |
| return false; |
| |
| // If there is no online payment portal information, it's safer to assume |
| // the service does not require activation. |
| if (!modem_info()->cellular_operator_info()) |
| return false; |
| |
| const CellularService::OLP *olp = |
| modem_info()->cellular_operator_info()->GetOLPByMCCMNC(operator_id_); |
| if (!olp) |
| return false; |
| |
| // To avoid false positives, it's safer to assume the service does not |
| // require activation if MDN is not set. |
| if (mdn_.empty()) |
| return false; |
| |
| // If MDN contains only zeros, the service requires activation. |
| return !IsMdnValid(); |
| } |
| |
| bool CellularCapabilityUniversal::IsMdnValid() const { |
| // Note that |mdn_| is normalized to contain only digits in OnMdnChanged(). |
| for (size_t i = 0; i < mdn_.size(); ++i) { |
| if (mdn_[i] != '0') |
| return true; |
| } |
| return false; |
| } |
| |
| // always called from an async context |
| void CellularCapabilityUniversal::Register(const ResultCallback &callback) { |
| SLOG(Cellular, 2) << __func__ << " \"" << selected_network_ << "\""; |
| CHECK(!callback.is_null()); |
| Error error; |
| ResultCallback cb = Bind(&CellularCapabilityUniversal::OnRegisterReply, |
| weak_ptr_factory_.GetWeakPtr(), callback); |
| modem_3gpp_proxy_->Register(selected_network_, &error, cb, kTimeoutRegister); |
| if (error.IsFailure()) |
| callback.Run(error); |
| } |
| |
| void CellularCapabilityUniversal::RegisterOnNetwork( |
| const string &network_id, |
| Error *error, |
| const ResultCallback &callback) { |
| SLOG(Cellular, 2) << __func__ << "(" << network_id << ")"; |
| CHECK(error); |
| desired_network_ = network_id; |
| ResultCallback cb = Bind(&CellularCapabilityUniversal::OnRegisterReply, |
| weak_ptr_factory_.GetWeakPtr(), callback); |
| modem_3gpp_proxy_->Register(network_id, error, cb, kTimeoutRegister); |
| } |
| |
| void CellularCapabilityUniversal::OnRegisterReply( |
| const ResultCallback &callback, |
| const Error &error) { |
| SLOG(Cellular, 2) << __func__ << "(" << error << ")"; |
| |
| if (error.IsSuccess()) { |
| selected_network_ = desired_network_; |
| desired_network_.clear(); |
| callback.Run(error); |
| return; |
| } |
| // If registration on the desired network failed, |
| // try to register on the home network. |
| if (!desired_network_.empty()) { |
| desired_network_.clear(); |
| selected_network_.clear(); |
| LOG(INFO) << "Couldn't register on selected network, trying home network"; |
| Register(callback); |
| return; |
| } |
| callback.Run(error); |
| } |
| |
| bool CellularCapabilityUniversal::IsRegistered() { |
| return (registration_state_ == MM_MODEM_3GPP_REGISTRATION_STATE_HOME || |
| registration_state_ == MM_MODEM_3GPP_REGISTRATION_STATE_ROAMING); |
| } |
| |
| void CellularCapabilityUniversal::SetUnregistered(bool searching) { |
| // If we're already in some non-registered state, don't override that |
| if (registration_state_ == MM_MODEM_3GPP_REGISTRATION_STATE_HOME || |
| registration_state_ == MM_MODEM_3GPP_REGISTRATION_STATE_ROAMING) { |
| registration_state_ = |
| (searching ? MM_MODEM_3GPP_REGISTRATION_STATE_SEARCHING : |
| MM_MODEM_3GPP_REGISTRATION_STATE_IDLE); |
| } |
| } |
| |
| void CellularCapabilityUniversal::RequirePIN( |
| const string &pin, bool require, |
| Error *error, const ResultCallback &callback) { |
| CHECK(error); |
| sim_proxy_->EnablePin(pin, require, error, callback, kTimeoutDefault); |
| } |
| |
| void CellularCapabilityUniversal::EnterPIN(const string &pin, |
| Error *error, |
| const ResultCallback &callback) { |
| CHECK(error); |
| sim_proxy_->SendPin(pin, error, callback, kTimeoutDefault); |
| } |
| |
| void CellularCapabilityUniversal::UnblockPIN(const string &unblock_code, |
| const string &pin, |
| Error *error, |
| const ResultCallback &callback) { |
| CHECK(error); |
| sim_proxy_->SendPuk(unblock_code, pin, error, callback, kTimeoutDefault); |
| } |
| |
| void CellularCapabilityUniversal::ChangePIN( |
| const string &old_pin, const string &new_pin, |
| Error *error, const ResultCallback &callback) { |
| CHECK(error); |
| sim_proxy_->ChangePin(old_pin, new_pin, error, callback, kTimeoutDefault); |
| } |
| |
| void CellularCapabilityUniversal::Reset(Error *error, |
| const ResultCallback &callback) { |
| SLOG(Cellular, 2) << __func__; |
| CHECK(error); |
| if (resetting_) { |
| Error::PopulateAndLog(error, Error::kInProgress, "Already resetting"); |
| return; |
| } |
| ResultCallback cb = Bind(&CellularCapabilityUniversal::OnResetReply, |
| weak_ptr_factory_.GetWeakPtr(), callback); |
| modem_proxy_->Reset(error, cb, kTimeoutReset); |
| if (!error->IsFailure()) { |
| resetting_ = true; |
| } |
| } |
| |
| void CellularCapabilityUniversal::OnResetReply(const ResultCallback &callback, |
| const Error &error) { |
| SLOG(Cellular, 2) << __func__; |
| resetting_ = false; |
| if (!callback.is_null()) |
| callback.Run(error); |
| } |
| |
| void CellularCapabilityUniversal::Scan(Error *error, |
| const ResultCallback &callback) { |
| SLOG(Cellular, 2) << __func__; |
| CHECK(error); |
| if (scanning_) { |
| Error::PopulateAndLog(error, Error::kInProgress, "Already scanning"); |
| return; |
| } |
| DBusPropertyMapsCallback cb = Bind(&CellularCapabilityUniversal::OnScanReply, |
| weak_ptr_factory_.GetWeakPtr(), callback); |
| modem_3gpp_proxy_->Scan(error, cb, kTimeoutScan); |
| if (!error->IsFailure()) { |
| scanning_ = true; |
| UpdateScanningProperty(); |
| } |
| } |
| |
| void CellularCapabilityUniversal::OnScanReply(const ResultCallback &callback, |
| const ScanResults &results, |
| const Error &error) { |
| SLOG(Cellular, 2) << __func__; |
| |
| // Error handling is weak. The current expectation is that on any |
| // error, found_networks_ should be cleared and a property change |
| // notification sent out. |
| // |
| // TODO(jglasgow): fix error handling |
| scanning_ = false; |
| UpdateScanningProperty(); |
| found_networks_.clear(); |
| if (!error.IsFailure()) { |
| for (ScanResults::const_iterator it = results.begin(); |
| it != results.end(); ++it) { |
| found_networks_.push_back(ParseScanResult(*it)); |
| } |
| } |
| cellular()->adaptor()->EmitStringmapsChanged(flimflam::kFoundNetworksProperty, |
| found_networks_); |
| |
| // TODO(gmorain): This check for is_null() is a work-around because |
| // Cellular::Scan() passes a null callback. Instead: 1. Have Cellular::Scan() |
| // pass in a callback. 2. Have Cellular "own" the found_networks_ property |
| // 3. Have Cellular EmitStingMapsChanged() 4. Share the code between GSM and |
| // Universal. |
| if (!callback.is_null()) |
| callback.Run(error); |
| } |
| |
| Stringmap CellularCapabilityUniversal::ParseScanResult( |
| const ScanResult &result) { |
| |
| /* ScanResults contain the following keys: |
| |
| "status" |
| A MMModem3gppNetworkAvailability value representing network |
| availability status, given as an unsigned integer (signature "u"). |
| This key will always be present. |
| |
| "operator-long" |
| Long-format name of operator, given as a string value (signature |
| "s"). If the name is unknown, this field should not be present. |
| |
| "operator-short" |
| Short-format name of operator, given as a string value |
| (signature "s"). If the name is unknown, this field should not |
| be present. |
| |
| "operator-code" |
| Mobile code of the operator, given as a string value (signature |
| "s"). Returned in the format "MCCMNC", where MCC is the |
| three-digit ITU E.212 Mobile Country Code and MNC is the two- or |
| three-digit GSM Mobile Network Code. e.g. "31026" or "310260". |
| |
| "access-technology" |
| A MMModemAccessTechnology value representing the generic access |
| technology used by this mobile network, given as an unsigned |
| integer (signature "u"). |
| */ |
| Stringmap parsed; |
| |
| uint32 status; |
| if (DBusProperties::GetUint32(result, kStatusProperty, &status)) { |
| // numerical values are taken from 3GPP TS 27.007 Section 7.3. |
| static const char * const kStatusString[] = { |
| "unknown", // MM_MODEM_3GPP_NETWORK_AVAILABILITY_UNKNOWN |
| "available", // MM_MODEM_3GPP_NETWORK_AVAILABILITY_AVAILABLE |
| "current", // MM_MODEM_3GPP_NETWORK_AVAILABILITY_CURRENT |
| "forbidden", // MM_MODEM_3GPP_NETWORK_AVAILABILITY_FORBIDDEN |
| }; |
| parsed[flimflam::kStatusProperty] = kStatusString[status]; |
| } |
| |
| uint32 tech; // MMModemAccessTechnology |
| if (DBusProperties::GetUint32(result, kOperatorAccessTechnologyProperty, |
| &tech)) { |
| parsed[flimflam::kTechnologyProperty] = AccessTechnologyToString(tech); |
| } |
| |
| string operator_long, operator_short, operator_code; |
| if (DBusProperties::GetString(result, kOperatorLongProperty, &operator_long)) |
| parsed[flimflam::kLongNameProperty] = operator_long; |
| if (DBusProperties::GetString(result, kOperatorShortProperty, |
| &operator_short)) |
| parsed[flimflam::kShortNameProperty] = operator_short; |
| if (DBusProperties::GetString(result, kOperatorCodeProperty, &operator_code)) |
| parsed[flimflam::kNetworkIdProperty] = operator_code; |
| |
| // If the long name is not available but the network ID is, look up the long |
| // name in the mobile provider database. |
| if ((!ContainsKey(parsed, flimflam::kLongNameProperty) || |
| parsed[flimflam::kLongNameProperty].empty()) && |
| ContainsKey(parsed, flimflam::kNetworkIdProperty)) { |
| mobile_provider *provider = |
| mobile_provider_lookup_by_network( |
| modem_info()->provider_db(), |
| parsed[flimflam::kNetworkIdProperty].c_str()); |
| if (provider) { |
| const char *long_name = mobile_provider_get_name(provider); |
| if (long_name && *long_name) { |
| parsed[flimflam::kLongNameProperty] = long_name; |
| } |
| } |
| } |
| return parsed; |
| } |
| |
| string CellularCapabilityUniversal::GetNetworkTechnologyString() const { |
| // If we know that the modem is an E362, return LTE here to make sure that |
| // Chrome sees LTE as the network technology even if the actual technology is |
| // unknown. |
| // TODO(armansito): This hack will cause the UI to display LTE even if the |
| // modem doesn't support it at a given time. This might be problematic if we |
| // ever want to support switching between access technologies (e.g. falling |
| // back to 3G when LTE is not available). |
| if (model_id_ == kE362ModelId) |
| return flimflam::kNetworkTechnologyLte; |
| |
| // Order is important. Return the highest speed technology |
| // TODO(jglasgow): change shill interfaces to a capability model |
| return AccessTechnologyToString(access_technologies_); |
| } |
| |
| string CellularCapabilityUniversal::GetRoamingStateString() const { |
| switch (registration_state_) { |
| case MM_MODEM_3GPP_REGISTRATION_STATE_HOME: |
| return flimflam::kRoamingStateHome; |
| case MM_MODEM_3GPP_REGISTRATION_STATE_ROAMING: |
| return flimflam::kRoamingStateRoaming; |
| default: |
| break; |
| } |
| return flimflam::kRoamingStateUnknown; |
| } |
| |
| void CellularCapabilityUniversal::GetSignalQuality() { |
| // TODO(njw): Switch to asynchronous calls (crosbug.com/17583). |
| const DBus::Struct<unsigned int, bool> quality = |
| modem_proxy_->SignalQuality(); |
| OnSignalQualityChanged(quality._1); |
| } |
| |
| string CellularCapabilityUniversal::GetTypeString() const { |
| return AccessTechnologyToTechnologyFamily(access_technologies_); |
| } |
| |
| void CellularCapabilityUniversal::OnModemPropertiesChanged( |
| const DBusPropertiesMap &properties, |
| const vector<string> &/* invalidated_properties */) { |
| // This solves a bootstrapping problem: If the modem is not yet |
| // enabled, there are no proxy objects associated with the capability |
| // object, so modem signals like StateChanged aren't seen. By monitoring |
| // changes to the State property via the ModemManager, we're able to |
| // get the initialization process started, which will result in the |
| // creation of the proxy objects. |
| // |
| // The first time we see the change to State (when the modem state |
| // is Unknown), we simply update the state, and rely on the Manager to |
| // enable the device when it is registered with the Manager. On subsequent |
| // changes to State, we need to explicitly enable the device ourselves. |
| int32 istate; |
| if (DBusProperties::GetInt32(properties, MM_MODEM_PROPERTY_STATE, &istate)) { |
| Cellular::ModemState state = static_cast<Cellular::ModemState>(istate); |
| OnModemStateChanged(state); |
| } |
| string string_value; |
| if (DBusProperties::GetObjectPath(properties, |
| MM_MODEM_PROPERTY_SIM, &string_value)) |
| OnSimPathChanged(string_value); |
| uint32 uint_value; |
| if (DBusProperties::GetUint32(properties, |
| MM_MODEM_PROPERTY_MODEMCAPABILITIES, |
| &uint_value)) |
| OnModemCapabilitesChanged(uint_value); |
| if (DBusProperties::GetUint32(properties, |
| MM_MODEM_PROPERTY_CURRENTCAPABILITIES, |
| &uint_value)) |
| OnModemCurrentCapabilitiesChanged(uint_value); |
| // not needed: MM_MODEM_PROPERTY_MAXBEARERS |
| // not needed: MM_MODEM_PROPERTY_MAXACTIVEBEARERS |
| if (DBusProperties::GetString(properties, |
| MM_MODEM_PROPERTY_MANUFACTURER, |
| &string_value)) |
| OnModemManufacturerChanged(string_value); |
| if (DBusProperties::GetString(properties, |
| MM_MODEM_PROPERTY_MODEL, |
| &string_value)) |
| OnModemModelChanged(string_value); |
| if (DBusProperties::GetString(properties, |
| MM_MODEM_PROPERTY_REVISION, |
| &string_value)) |
| OnModemRevisionChanged(string_value); |
| // not needed: MM_MODEM_PROPERTY_DEVICEIDENTIFIER |
| // not needed: MM_MODEM_PROPERTY_DEVICE |
| // not needed: MM_MODEM_PROPERTY_DRIVER |
| // not needed: MM_MODEM_PROPERTY_PLUGIN |
| // not needed: MM_MODEM_PROPERTY_EQUIPMENTIDENTIFIER |
| |
| // Unlock required and SimLock |
| bool locks_changed = false; |
| uint32_t unlock_required; // This is really of type MMModemLock |
| if (DBusProperties::GetUint32(properties, |
| MM_MODEM_PROPERTY_UNLOCKREQUIRED, |
| &unlock_required)) { |
| locks_changed = true; |
| } |
| LockRetryData lock_retries; |
| DBusPropertiesMap::const_iterator it = |
| properties.find(MM_MODEM_PROPERTY_UNLOCKRETRIES); |
| if (it != properties.end()) { |
| lock_retries = it->second.operator LockRetryData(); |
| locks_changed = true; |
| } |
| if (locks_changed) |
| OnLockRetriesChanged(static_cast<MMModemLock>(unlock_required), |
| lock_retries); |
| if (DBusProperties::GetUint32(properties, |
| MM_MODEM_PROPERTY_ACCESSTECHNOLOGIES, |
| &uint_value)) |
| OnAccessTechnologiesChanged(uint_value); |
| |
| it = properties.find(MM_MODEM_PROPERTY_SIGNALQUALITY); |
| if (it != properties.end()) { |
| DBus::Struct<unsigned int, bool> quality = it->second; |
| OnSignalQualityChanged(quality._1); |
| } |
| vector<string> numbers; |
| if (DBusProperties::GetStrings(properties, MM_MODEM_PROPERTY_OWNNUMBERS, |
| &numbers)) { |
| string mdn; |
| if (numbers.size() > 0) |
| mdn = numbers[0]; |
| OnMdnChanged(mdn); |
| } |
| if (DBusProperties::GetUint32(properties, MM_MODEM_PROPERTY_SUPPORTEDMODES, |
| &uint_value)) |
| OnSupportedModesChanged(uint_value); |
| if (DBusProperties::GetUint32(properties, MM_MODEM_PROPERTY_ALLOWEDMODES, |
| &uint_value)) |
| OnAllowedModesChanged(uint_value); |
| if (DBusProperties::GetUint32(properties, MM_MODEM_PROPERTY_PREFERREDMODE, |
| &uint_value)) |
| OnPreferredModeChanged(static_cast<MMModemMode>(uint_value)); |
| // au: MM_MODEM_PROPERTY_SUPPORTEDBANDS, |
| // au: MM_MODEM_PROPERTY_BANDS |
| } |
| |
| void CellularCapabilityUniversal::OnDBusPropertiesChanged( |
| const string &interface, |
| const DBusPropertiesMap &changed_properties, |
| const vector<string> &invalidated_properties) { |
| SLOG(Cellular, 2) << __func__ << "(" << interface << ")"; |
| if (interface == MM_DBUS_INTERFACE_MODEM) { |
| OnModemPropertiesChanged(changed_properties, invalidated_properties); |
| } |
| if (interface == MM_DBUS_INTERFACE_MODEM_MODEM3GPP) { |
| OnModem3GPPPropertiesChanged(changed_properties, invalidated_properties); |
| } |
| if (interface == MM_DBUS_INTERFACE_SIM) { |
| OnSimPropertiesChanged(changed_properties, invalidated_properties); |
| } |
| } |
| |
| bool CellularCapabilityUniversal::RetriableConnectError( |
| const Error &error) const { |
| if (error.type() == Error::kInvalidApn) |
| return true; |
| |
| // modemmanager does not ever return kInvalidApn for E362 modems |
| // with 1.41 firmware. It remains to be seem if this will change |
| // with 3.x firmware. |
| if ((model_id_ == kE362ModelId) && (error.type() == Error::kOperationFailed)) |
| return true; |
| |
| return false; |
| } |
| |
| void CellularCapabilityUniversal::OnNetworkModeSignal(uint32 /*mode*/) { |
| // TODO(petkov): Implement this. |
| NOTIMPLEMENTED(); |
| } |
| |
| bool CellularCapabilityUniversal::IsValidSimPath(const string &sim_path) const { |
| return !sim_path.empty() && sim_path != kRootPath; |
| } |
| |
| string CellularCapabilityUniversal::NormalizeMdn(const string &mdn) const { |
| string normalized_mdn; |
| for (size_t i = 0; i < mdn.size(); ++i) { |
| if (IsAsciiDigit(mdn[i])) |
| normalized_mdn += mdn[i]; |
| } |
| return normalized_mdn; |
| } |
| |
| void CellularCapabilityUniversal::OnSimPathChanged( |
| const string &sim_path) { |
| if (sim_path == sim_path_) |
| return; |
| |
| mm1::SimProxyInterface *proxy = NULL; |
| if (IsValidSimPath(sim_path)) |
| proxy = proxy_factory()->CreateSimProxy(sim_path, |
| cellular()->dbus_owner()); |
| sim_path_ = sim_path; |
| sim_proxy_.reset(proxy); |
| |
| if (!IsValidSimPath(sim_path)) { |
| // Clear all data about the sim |
| imsi_ = ""; |
| spn_ = ""; |
| sim_present_ = false; |
| OnSimIdentifierChanged(""); |
| OnOperatorIdChanged(""); |
| } else { |
| sim_present_ = true; |
| scoped_ptr<DBusPropertiesProxyInterface> properties_proxy( |
| proxy_factory()->CreateDBusPropertiesProxy(sim_path, |
| cellular()->dbus_owner())); |
| // TODO(jglasgow): convert to async interface |
| DBusPropertiesMap properties( |
| properties_proxy->GetAll(MM_DBUS_INTERFACE_SIM)); |
| OnSimPropertiesChanged(properties, vector<string>()); |
| } |
| } |
| |
| void CellularCapabilityUniversal::OnModemCapabilitesChanged( |
| uint32 capabilities) { |
| capabilities_ = capabilities; |
| } |
| |
| void CellularCapabilityUniversal::OnModemCurrentCapabilitiesChanged( |
| uint32 current_capabilities) { |
| current_capabilities_ = current_capabilities; |
| |
| // Only allow network scan when the modem's current capabilities support |
| // GSM/UMTS. |
| // |
| // TODO(benchan): We should consider having the modem plugins in ModemManager |
| // reporting whether network scan is supported. |
| scanning_supported_ = |
| (current_capabilities & MM_MODEM_CAPABILITY_GSM_UMTS) != 0; |
| if (cellular()->adaptor()) { |
| cellular()->adaptor()->EmitBoolChanged( |
| flimflam::kSupportNetworkScanProperty, scanning_supported_); |
| } |
| } |
| |
| void CellularCapabilityUniversal::OnMdnChanged( |
| const string &mdn) { |
| mdn_ = NormalizeMdn(mdn); |
| UpdateIccidActivationState(); |
| } |
| |
| void CellularCapabilityUniversal::OnModemManufacturerChanged( |
| const string &manufacturer) { |
| manufacturer_ = manufacturer; |
| } |
| |
| void CellularCapabilityUniversal::OnModemModelChanged( |
| const string &model) { |
| model_id_ = model; |
| } |
| |
| void CellularCapabilityUniversal::OnModemRevisionChanged( |
| const string &revision) { |
| firmware_revision_ = revision; |
| } |
| |
| void CellularCapabilityUniversal::OnModemStateChanged( |
| Cellular::ModemState state) { |
| Cellular::ModemState prev_modem_state = cellular()->modem_state(); |
| bool was_enabled = cellular()->IsUnderlyingDeviceEnabled(); |
| if (Cellular::IsEnabledModemState(state)) |
| cellular()->set_modem_state(state); |
| SLOG(Cellular, 2) << __func__ << ": prev_modem_state: " << prev_modem_state |
| << " was_enabled: " << was_enabled |
| << " cellular state: " |
| << cellular()->GetStateString(cellular()->state()); |
| if (prev_modem_state != Cellular::kModemStateUnknown && |
| prev_modem_state != Cellular::kModemStateEnabling && |
| !was_enabled && |
| cellular()->state() == Cellular::kStateDisabled && |
| cellular()->IsUnderlyingDeviceEnabled()) { |
| cellular()->SetEnabled(true); |
| } |
| UpdateScanningProperty(); |
| } |
| |
| void CellularCapabilityUniversal::OnAccessTechnologiesChanged( |
| uint32 access_technologies) { |
| if (access_technologies_ != access_technologies) { |
| const string old_type_string(GetTypeString()); |
| access_technologies_ = access_technologies; |
| const string new_type_string(GetTypeString()); |
| if (new_type_string != old_type_string) { |
| // TODO(jglasgow): address layering violation of emitting change |
| // signal here for a property owned by Cellular. |
| cellular()->adaptor()->EmitStringChanged( |
| flimflam::kTechnologyFamilyProperty, new_type_string); |
| } |
| if (cellular()->service().get()) { |
| cellular()->service()->SetNetworkTechnology(GetNetworkTechnologyString()); |
| } |
| } |
| } |
| |
| void CellularCapabilityUniversal::OnSupportedModesChanged( |
| uint32 supported_modes) { |
| supported_modes_ = supported_modes; |
| } |
| |
| void CellularCapabilityUniversal::OnAllowedModesChanged( |
| uint32 allowed_modes) { |
| allowed_modes_ = allowed_modes; |
| } |
| |
| void CellularCapabilityUniversal::OnPreferredModeChanged( |
| MMModemMode preferred_mode) { |
| preferred_mode_ = preferred_mode; |
| } |
| |
| void CellularCapabilityUniversal::OnLockRetriesChanged( |
| MMModemLock unlock_required, |
| const LockRetryData &lock_retries) { |
| switch (unlock_required) { |
| case MM_MODEM_LOCK_SIM_PIN: |
| sim_lock_status_.lock_type = "sim-pin"; |
| break; |
| case MM_MODEM_LOCK_SIM_PUK: |
| sim_lock_status_.lock_type = "sim-puk"; |
| break; |
| default: |
| sim_lock_status_.lock_type = ""; |
| break; |
| } |
| LockRetryData::const_iterator it = lock_retries.find(unlock_required); |
| if (it != lock_retries.end()) { |
| sim_lock_status_.retries_left = it->second; |
| } else { |
| // Unknown, use 999 |
| sim_lock_status_.retries_left = 999; |
| } |
| OnSimLockStatusChanged(); |
| } |
| |
| void CellularCapabilityUniversal::OnSimLockStatusChanged() { |
| cellular()->adaptor()->EmitKeyValueStoreChanged( |
| flimflam::kSIMLockStatusProperty, SimLockStatusToProperty(NULL)); |
| |
| // If the SIM is currently unlocked, assume that we need to refresh |
| // carrier information, since a locked SIM prevents shill from obtaining |
| // the necessary data to establish a connection later (e.g. IMSI). |
| if (!sim_path_.empty() && sim_lock_status_.lock_type.empty()) { |
| scoped_ptr<DBusPropertiesProxyInterface> properties_proxy( |
| proxy_factory()->CreateDBusPropertiesProxy(sim_path_, |
| cellular()->dbus_owner())); |
| DBusPropertiesMap properties( |
| properties_proxy->GetAll(MM_DBUS_INTERFACE_SIM)); |
| OnSimPropertiesChanged(properties, vector<string>()); |
| } |
| } |
| |
| void CellularCapabilityUniversal::OnModem3GPPPropertiesChanged( |
| const DBusPropertiesMap &properties, |
| const vector<string> &/* invalidated_properties */) { |
| SLOG(Cellular, 2) << __func__; |
| string imei; |
| if (DBusProperties::GetString(properties, |
| MM_MODEM_MODEM3GPP_PROPERTY_IMEI, |
| &imei)) |
| OnImeiChanged(imei); |
| |
| // Handle registration state changes as a single change |
| string operator_code = serving_operator_.GetCode(); |
| string operator_name = serving_operator_.GetName(); |
| MMModem3gppRegistrationState state = registration_state_; |
| bool registration_changed = false; |
| uint32 uint_value; |
| if (DBusProperties::GetUint32(properties, |
| MM_MODEM_MODEM3GPP_PROPERTY_REGISTRATIONSTATE, |
| &uint_value)) { |
| state = static_cast<MMModem3gppRegistrationState>(uint_value); |
| registration_changed = true; |
| } |
| if (DBusProperties::GetString(properties, |
| MM_MODEM_MODEM3GPP_PROPERTY_OPERATORCODE, |
| &operator_code)) |
| registration_changed = true; |
| if (DBusProperties::GetString(properties, |
| MM_MODEM_MODEM3GPP_PROPERTY_OPERATORNAME, |
| &operator_name)) |
| registration_changed = true; |
| if (registration_changed) |
| On3GPPRegistrationChanged(state, operator_code, operator_name); |
| |
| uint32 locks = 0; |
| if (DBusProperties::GetUint32( |
| properties, MM_MODEM_MODEM3GPP_PROPERTY_ENABLEDFACILITYLOCKS, |
| &locks)) |
| OnFacilityLocksChanged(locks); |
| } |
| |
| void CellularCapabilityUniversal::OnImeiChanged(const string &imei) { |
| imei_ = imei; |
| } |
| |
| void CellularCapabilityUniversal::On3GPPRegistrationChanged( |
| MMModem3gppRegistrationState state, |
| const string &operator_code, |
| const string &operator_name) { |
| SLOG(Cellular, 2) << __func__ << ": regstate=" << state |
| << ", opercode=" << operator_code |
| << ", opername=" << operator_name; |
| registration_state_ = state; |
| serving_operator_.SetCode(operator_code); |
| serving_operator_.SetName(operator_name); |
| |
| // Update the carrier name for |serving_operator_|. |
| UpdateOperatorInfo(); |
| |
| cellular()->HandleNewRegistrationState(); |
| |
| // Update the user facing name of the cellular service. |
| UpdateServiceName(); |
| |
| // If the modem registered with the network and the current ICCID is pending |
| // activation, then reset the modem. |
| UpdateIccidActivationState(); |
| } |
| |
| void CellularCapabilityUniversal::OnModemStateChangedSignal( |
| int32 old_state, int32 new_state, uint32 reason) { |
| SLOG(Cellular, 2) << __func__ << "(" << old_state << ", " << new_state << ", " |
| << reason << ")"; |
| cellular()->OnModemStateChanged(static_cast<Cellular::ModemState>(old_state), |
| static_cast<Cellular::ModemState>(new_state), |
| reason); |
| UpdateScanningProperty(); |
| if (!deferred_enable_modem_callback_.is_null() && |
| (new_state == Cellular::kModemStateDisabled)) { |
| SLOG(Cellular, 2) << "Enabling modem after deferring"; |
| deferred_enable_modem_callback_.Run(); |
| deferred_enable_modem_callback_.Reset(); |
| } else if (new_state == Cellular::kModemStateConnected) { |
| SLOG(Cellular, 2) << "Updating bearer path to reflect the active bearer."; |
| UpdateBearerPath(); |
| } |
| } |
| |
| void CellularCapabilityUniversal::OnSignalQualityChanged(uint32 quality) { |
| cellular()->HandleNewSignalQuality(quality); |
| } |
| |
| void CellularCapabilityUniversal::OnFacilityLocksChanged(uint32 locks) { |
| if (sim_lock_status_.enabled != (locks & MM_MODEM_3GPP_FACILITY_SIM)) { |
| sim_lock_status_.enabled = locks & MM_MODEM_3GPP_FACILITY_SIM; |
| OnSimLockStatusChanged(); |
| } |
| } |
| |
| void CellularCapabilityUniversal::OnSimPropertiesChanged( |
| const DBusPropertiesMap &props, |
| const vector<string> &/* invalidated_properties */) { |
| SLOG(Cellular, 2) << __func__; |
| string value; |
| if (DBusProperties::GetString(props, MM_SIM_PROPERTY_SIMIDENTIFIER, &value)) |
| OnSimIdentifierChanged(value); |
| if (DBusProperties::GetString(props, MM_SIM_PROPERTY_OPERATORIDENTIFIER, |
| &value)) |
| OnOperatorIdChanged(value); |
| if (DBusProperties::GetString(props, MM_SIM_PROPERTY_OPERATORNAME, &value)) |
| OnSpnChanged(value); |
| if (DBusProperties::GetString(props, MM_SIM_PROPERTY_IMSI, &value)) |
| OnImsiChanged(value); |
| SetHomeProvider(); |
| } |
| |
| // TODO(armansito): The following methods should probably log their argument |
| // values. Need to learn if any of them need to be scrubbed. |
| void CellularCapabilityUniversal::OnImsiChanged(const std::string &imsi) { |
| imsi_ = imsi; |
| } |
| |
| void CellularCapabilityUniversal::OnSpnChanged(const std::string &spn) { |
| spn_ = spn; |
| } |
| |
| void CellularCapabilityUniversal::OnSimIdentifierChanged(const string &id) { |
| sim_identifier_ = id; |
| UpdateIccidActivationState(); |
| } |
| |
| void CellularCapabilityUniversal::OnOperatorIdChanged( |
| const string &operator_id) { |
| SLOG(Cellular, 2) << "Operator ID = '" << operator_id << "'"; |
| operator_id_ = operator_id; |
| } |
| |
| } // namespace shill |