| // Copyright (c) 2012 The Chromium OS Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include "shill/wifi.h" |
| |
| #include <stdio.h> |
| #include <string.h> |
| #include <netinet/ether.h> |
| #include <linux/if.h> // Needs definitions from netinet/ether.h |
| |
| #include <algorithm> |
| #include <map> |
| #include <string> |
| #include <vector> |
| |
| #include <base/bind.h> |
| #include <base/stringprintf.h> |
| #include <base/string_util.h> |
| #include <chromeos/dbus/service_constants.h> |
| #include <glib.h> |
| |
| #include "shill/config80211.h" |
| #include "shill/control_interface.h" |
| #include "shill/dbus_adaptor.h" |
| #include "shill/device.h" |
| #include "shill/error.h" |
| #include "shill/geolocation_info.h" |
| #include "shill/ieee80211.h" |
| #include "shill/link_monitor.h" |
| #include "shill/logging.h" |
| #include "shill/manager.h" |
| #include "shill/metrics.h" |
| #include "shill/property_accessor.h" |
| #include "shill/proxy_factory.h" |
| #include "shill/rtnl_handler.h" |
| #include "shill/scope_logger.h" |
| #include "shill/shill_time.h" |
| #include "shill/supplicant_eap_state_handler.h" |
| #include "shill/supplicant_interface_proxy_interface.h" |
| #include "shill/supplicant_network_proxy_interface.h" |
| #include "shill/supplicant_process_proxy_interface.h" |
| #include "shill/technology.h" |
| #include "shill/wifi_endpoint.h" |
| #include "shill/wifi_provider.h" |
| #include "shill/wifi_service.h" |
| #include "shill/wpa_supplicant.h" |
| |
| using base::Bind; |
| using base::StringPrintf; |
| using std::map; |
| using std::string; |
| using std::vector; |
| |
| namespace shill { |
| |
| // statics |
| const char *WiFi::kDefaultBgscanMethod = |
| WPASupplicant::kNetworkBgscanMethodSimple; |
| const uint16 WiFi::kDefaultBgscanShortIntervalSeconds = 30; |
| const int32 WiFi::kDefaultBgscanSignalThresholdDbm = -50; |
| const uint16 WiFi::kDefaultScanIntervalSeconds = 180; |
| // Scan interval while connected. |
| const uint16 WiFi::kBackgroundScanIntervalSeconds = 3601; |
| // Age (in seconds) beyond which a BSS cache entry will not be preserved, |
| // across a suspend/resume. |
| const time_t WiFi::kMaxBSSResumeAgeSeconds = 10; |
| const char WiFi::kInterfaceStateUnknown[] = "shill-unknown"; |
| const time_t WiFi::kRescanIntervalSeconds = 1; |
| const int WiFi::kNumFastScanAttempts = 3; |
| const int WiFi::kFastScanIntervalSeconds = 10; |
| const int WiFi::kPendingTimeoutSeconds = 15; |
| const int WiFi::kReconnectTimeoutSeconds = 10; |
| |
| WiFi::WiFi(ControlInterface *control_interface, |
| EventDispatcher *dispatcher, |
| Metrics *metrics, |
| Manager *manager, |
| const string& link, |
| const string &address, |
| int interface_index) |
| : Device(control_interface, |
| dispatcher, |
| metrics, |
| manager, |
| link, |
| address, |
| interface_index, |
| Technology::kWifi), |
| provider_(manager->wifi_provider()), |
| weak_ptr_factory_(this), |
| proxy_factory_(ProxyFactory::GetInstance()), |
| time_(Time::GetInstance()), |
| supplicant_present_(false), |
| supplicant_state_(kInterfaceStateUnknown), |
| supplicant_bss_("(unknown)"), |
| need_bss_flush_(false), |
| resumed_at_((struct timeval){0}), |
| fast_scans_remaining_(kNumFastScanAttempts), |
| has_already_completed_(false), |
| is_debugging_connection_(false), |
| eap_state_handler_(new SupplicantEAPStateHandler()), |
| bgscan_short_interval_seconds_(kDefaultBgscanShortIntervalSeconds), |
| bgscan_signal_threshold_dbm_(kDefaultBgscanSignalThresholdDbm), |
| scan_pending_(false), |
| scan_interval_seconds_(kDefaultScanIntervalSeconds) { |
| PropertyStore *store = this->mutable_store(); |
| store->RegisterDerivedString( |
| flimflam::kBgscanMethodProperty, |
| StringAccessor( |
| // TODO(petkov): CustomMappedAccessor is used for convenience because |
| // it provides a way to define a custom clearer (unlike |
| // CustomAccessor). We need to implement a fully custom accessor with |
| // no extra argument. |
| new CustomMappedAccessor<WiFi, string, int>(this, |
| &WiFi::ClearBgscanMethod, |
| &WiFi::GetBgscanMethod, |
| &WiFi::SetBgscanMethod, |
| 0))); // Unused. |
| HelpRegisterDerivedUint16(store, |
| flimflam::kBgscanShortIntervalProperty, |
| &WiFi::GetBgscanShortInterval, |
| &WiFi::SetBgscanShortInterval); |
| HelpRegisterDerivedInt32(store, |
| flimflam::kBgscanSignalThresholdProperty, |
| &WiFi::GetBgscanSignalThreshold, |
| &WiFi::SetBgscanSignalThreshold); |
| |
| // TODO(quiche): Decide if scan_pending_ is close enough to |
| // "currently scanning" that we don't care, or if we want to track |
| // scan pending/currently scanning/no scan scheduled as a tri-state |
| // kind of thing. |
| store->RegisterConstBool(flimflam::kScanningProperty, &scan_pending_); |
| HelpRegisterDerivedUint16(store, |
| flimflam::kScanIntervalProperty, |
| &WiFi::GetScanInterval, |
| &WiFi::SetScanInterval); |
| ScopeLogger::GetInstance()->RegisterScopeEnableChangedCallback( |
| ScopeLogger::kWiFi, |
| Bind(&WiFi::OnWiFiDebugScopeChanged, weak_ptr_factory_.GetWeakPtr())); |
| SLOG(WiFi, 2) << "WiFi device " << link_name() << " initialized."; |
| } |
| |
| WiFi::~WiFi() {} |
| |
| void WiFi::Start(Error *error, const EnabledStateChangedCallback &callback) { |
| SLOG(WiFi, 2) << "WiFi " << link_name() << " starting."; |
| if (enabled()) { |
| return; |
| } |
| OnEnabledStateChanged(EnabledStateChangedCallback(), Error()); |
| if (error) { |
| error->Reset(); // indicate immediate completion |
| } |
| if (on_supplicant_appear_.IsCancelled()) { |
| // Registers the WPA supplicant appear/vanish callbacks only once per WiFi |
| // device instance. |
| on_supplicant_appear_.Reset( |
| Bind(&WiFi::OnSupplicantAppear, Unretained(this))); |
| on_supplicant_vanish_.Reset( |
| Bind(&WiFi::OnSupplicantVanish, Unretained(this))); |
| manager()->dbus_manager()->WatchName(WPASupplicant::kDBusAddr, |
| on_supplicant_appear_.callback(), |
| on_supplicant_vanish_.callback()); |
| } |
| // Connect to WPA supplicant if it's already present. If not, we'll connect to |
| // it when it appears. |
| ConnectToSupplicant(); |
| Config80211 *config80211 = Config80211::GetInstance(); |
| if (config80211) { |
| config80211->SetWifiState(Config80211::kWifiUp); |
| } |
| } |
| |
| void WiFi::Stop(Error *error, const EnabledStateChangedCallback &callback) { |
| SLOG(WiFi, 2) << "WiFi " << link_name() << " stopping."; |
| DropConnection(); |
| StopScanTimer(); |
| for (EndpointMap::iterator it = endpoint_by_rpcid_.begin(); |
| it != endpoint_by_rpcid_.end(); ++it) { |
| provider_->OnEndpointRemoved(it->second); |
| } |
| endpoint_by_rpcid_.clear(); |
| for (ReverseServiceMap::const_iterator it = rpcid_by_service_.begin(); |
| it != rpcid_by_service_.end(); ++it) { |
| RemoveNetwork(it->second); |
| } |
| rpcid_by_service_.clear(); |
| supplicant_interface_proxy_.reset(); // breaks a reference cycle |
| // TODO(quiche): Remove interface from supplicant. |
| supplicant_process_proxy_.reset(); |
| current_service_ = NULL; // breaks a reference cycle |
| pending_service_ = NULL; // breaks a reference cycle |
| is_debugging_connection_ = false; |
| SetScanPending(false); |
| StopPendingTimer(); |
| StopReconnectTimer(); |
| |
| OnEnabledStateChanged(EnabledStateChangedCallback(), Error()); |
| if (error) |
| error->Reset(); // indicate immediate completion |
| weak_ptr_factory_.InvalidateWeakPtrs(); |
| |
| SLOG(WiFi, 3) << "WiFi " << link_name() << " supplicant_process_proxy_ " |
| << (supplicant_process_proxy_.get() ? |
| "is set." : "is not set."); |
| SLOG(WiFi, 3) << "WiFi " << link_name() << " supplicant_interface_proxy_ " |
| << (supplicant_interface_proxy_.get() ? |
| "is set." : "is not set."); |
| SLOG(WiFi, 3) << "WiFi " << link_name() << " pending_service_ " |
| << (pending_service_.get() ? "is set." : "is not set."); |
| SLOG(WiFi, 3) << "WiFi " << link_name() << " has " |
| << endpoint_by_rpcid_.size() << " EndpointMap entries."; |
| } |
| |
| void WiFi::Scan(Error */*error*/) { |
| LOG(INFO) << __func__; |
| |
| // Needs to send a D-Bus message, but may be called from D-Bus |
| // signal handler context (via Manager::RequestScan). So defer work |
| // to event loop. |
| dispatcher()->PostTask(Bind(&WiFi::ScanTask, weak_ptr_factory_.GetWeakPtr())); |
| } |
| |
| void WiFi::BSSAdded(const ::DBus::Path &path, |
| const map<string, ::DBus::Variant> &properties) { |
| // Called from a D-Bus signal handler, and may need to send a D-Bus |
| // message. So defer work to event loop. |
| dispatcher()->PostTask(Bind(&WiFi::BSSAddedTask, |
| weak_ptr_factory_.GetWeakPtr(), |
| path, properties)); |
| } |
| |
| void WiFi::BSSRemoved(const ::DBus::Path &path) { |
| // Called from a D-Bus signal handler, and may need to send a D-Bus |
| // message. So defer work to event loop. |
| dispatcher()->PostTask(Bind(&WiFi::BSSRemovedTask, |
| weak_ptr_factory_.GetWeakPtr(), path)); |
| } |
| |
| void WiFi::Certification(const map<string, ::DBus::Variant> &properties) { |
| dispatcher()->PostTask(Bind(&WiFi::CertificationTask, |
| weak_ptr_factory_.GetWeakPtr(), properties)); |
| } |
| |
| void WiFi::EAPEvent(const string &status, const string ¶meter) { |
| dispatcher()->PostTask(Bind(&WiFi::EAPEventTask, |
| weak_ptr_factory_.GetWeakPtr(), |
| status, |
| parameter)); |
| } |
| |
| void WiFi::PropertiesChanged(const map<string, ::DBus::Variant> &properties) { |
| SLOG(WiFi, 2) << __func__; |
| // Called from D-Bus signal handler, but may need to send a D-Bus |
| // message. So defer work to event loop. |
| dispatcher()->PostTask(Bind(&WiFi::PropertiesChangedTask, |
| weak_ptr_factory_.GetWeakPtr(), properties)); |
| } |
| |
| void WiFi::ScanDone() { |
| LOG(INFO) << __func__; |
| |
| // Defer handling of scan result processing, because that processing |
| // may require the the registration of new D-Bus objects. And such |
| // registration can't be done in the context of a D-Bus signal |
| // handler. |
| dispatcher()->PostTask(Bind(&WiFi::ScanDoneTask, |
| weak_ptr_factory_.GetWeakPtr())); |
| } |
| |
| void WiFi::ConnectTo(WiFiService *service, |
| map<string, DBus::Variant> service_params) { |
| CHECK(service) << "Can't connect to NULL service."; |
| DBus::Path network_path; |
| |
| // TODO(quiche): Handle cases where already connected. |
| if (pending_service_ && pending_service_ == service) { |
| // TODO(quiche): Return an error to the caller. crosbug.com/23832 |
| LOG(INFO) << "WiFi " << link_name() << " ignoring ConnectTo service " |
| << service->unique_name() |
| << ", which is already pending."; |
| return; |
| } |
| |
| if (pending_service_ && pending_service_ != service) { |
| DisconnectFrom(pending_service_); |
| } |
| |
| Error unused_error; |
| network_path = FindNetworkRpcidForService(service, &unused_error); |
| if (network_path.empty()) { |
| try { |
| const uint32_t scan_ssid = 1; // "True": Use directed probe. |
| service_params[WPASupplicant::kNetworkPropertyScanSSID].writer(). |
| append_uint32(scan_ssid); |
| AppendBgscan(service, &service_params); |
| network_path = supplicant_interface_proxy_->AddNetwork(service_params); |
| CHECK(!network_path.empty()); // No DBus path should be empty. |
| rpcid_by_service_[service] = network_path; |
| } catch (const DBus::Error &e) { // NOLINT |
| LOG(ERROR) << "exception while adding network: " << e.what(); |
| return; |
| } |
| } |
| |
| if (service->HasRecentConnectionIssues()) { |
| SetConnectionDebugging(true); |
| } |
| supplicant_interface_proxy_->SelectNetwork(network_path); |
| SetPendingService(service); |
| CHECK(current_service_.get() != pending_service_.get()); |
| |
| // SelectService here (instead of in LinkEvent, like Ethernet), so |
| // that, if we fail to bring up L2, we can attribute failure correctly. |
| // |
| // TODO(quiche): When we add code for dealing with connection failures, |
| // reconsider if this is the right place to change the selected service. |
| // see discussion in crosbug.com/20191. |
| SelectService(service); |
| } |
| |
| void WiFi::DisconnectFrom(WiFiService *service) { |
| if (service != current_service_ && service != pending_service_) { |
| // TODO(quiche): Once we have asynchronous reply support, we should |
| // generate a D-Bus error here. (crosbug.com/23832) |
| LOG(WARNING) << "In " << __func__ << "(): " |
| << " ignoring request to disconnect from service " |
| << service->unique_name() |
| << " which is neither current nor pending"; |
| return; |
| } |
| |
| if (pending_service_ && service != pending_service_) { |
| // TODO(quiche): Once we have asynchronous reply support, we should |
| // generate a D-Bus error here. (crosbug.com/23832) |
| LOG(WARNING) << "In " << __func__ << "(): " |
| << " ignoring request to disconnect from service " |
| << service->unique_name() |
| << " which is not the pending service."; |
| return; |
| } |
| |
| if (!pending_service_ && service != current_service_) { |
| // TODO(quiche): Once we have asynchronous reply support, we should |
| // generate a D-Bus error here. (crosbug.com/23832) |
| LOG(WARNING) << "In " << __func__ << "(): " |
| << " ignoring request to disconnect from service " |
| << service->unique_name() |
| << " which is not the current service."; |
| return; |
| } |
| |
| if (pending_service_) { |
| // Since wpa_supplicant has not yet set CurrentBSS, we can't depend |
| // on this to drive the service state back to idle. Do that here. |
| pending_service_->SetState(Service::kStateIdle); |
| } |
| |
| SetPendingService(NULL); |
| StopReconnectTimer(); |
| |
| if (!supplicant_present_) { |
| LOG(ERROR) << "In " << __func__ << "(): " |
| << "wpa_supplicant is not present; silently resetting " |
| << "current_service_."; |
| if (current_service_ == selected_service()) { |
| DropConnection(); |
| } |
| current_service_ = NULL; |
| return; |
| } |
| |
| try { |
| supplicant_interface_proxy_->Disconnect(); |
| // We'll call RemoveNetwork and reset |current_service_| after |
| // supplicant notifies us that the CurrentBSS has changed. |
| } catch (const DBus::Error &e) { // NOLINT |
| // Can't depend on getting a notification of CurrentBSS change. |
| // So effect changes immediately. For instance, this can happen when |
| // a disconnect is triggered by a BSS going away. |
| Error unused_error; |
| RemoveNetworkForService(service, &unused_error); |
| if (service == selected_service()) { |
| DropConnection(); |
| } |
| current_service_ = NULL; |
| } |
| |
| CHECK(current_service_ == NULL || |
| current_service_.get() != pending_service_.get()); |
| } |
| |
| bool WiFi::DisableNetwork(const ::DBus::Path &network) { |
| scoped_ptr<SupplicantNetworkProxyInterface> supplicant_network_proxy( |
| proxy_factory_->CreateSupplicantNetworkProxy( |
| network, WPASupplicant::kDBusAddr)); |
| try { |
| supplicant_network_proxy->SetEnabled(false); |
| } catch (const DBus::Error &e) { // NOLINT |
| LOG(ERROR) << "DisableNetwork for " << network << " failed."; |
| return false; |
| } |
| return true; |
| } |
| |
| bool WiFi::RemoveNetwork(const ::DBus::Path &network) { |
| try { |
| supplicant_interface_proxy_->RemoveNetwork(network); |
| } catch (const DBus::Error &e) { // NOLINT |
| // RemoveNetwork can fail with three different errors. |
| // |
| // If RemoveNetwork fails with a NetworkUnknown error, supplicant has |
| // already removed the network object, so return true as if |
| // RemoveNetwork removes the network object successfully. |
| // |
| // As shill always passes a valid network object path, RemoveNetwork |
| // should not fail with an InvalidArgs error. Return false in such case |
| // as something weird may have happened. Similarly, return false in case |
| // of an UnknownError. |
| if (strcmp(e.name(), WPASupplicant::kErrorNetworkUnknown) != 0) { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| bool WiFi::IsIdle() const { |
| return !current_service_ && !pending_service_; |
| } |
| |
| void WiFi::ClearCachedCredentials(const WiFiService *service) { |
| Error unused_error; |
| RemoveNetworkForService(service, &unused_error); |
| } |
| |
| void WiFi::NotifyEndpointChanged(const WiFiEndpointConstRefPtr &endpoint) { |
| provider_->OnEndpointUpdated(endpoint); |
| } |
| |
| void WiFi::AppendBgscan(WiFiService *service, |
| map<string, DBus::Variant> *service_params) const { |
| int scan_interval = kBackgroundScanIntervalSeconds; |
| string method = bgscan_method_; |
| if (method.empty()) { |
| // If multiple APs are detected for this SSID, configure the default method. |
| // Otherwise, disable background scanning completely. |
| if (service->GetEndpointCount() > 1) { |
| method = kDefaultBgscanMethod; |
| } else { |
| LOG(INFO) << "Background scan disabled -- single Endpoint for Service."; |
| return; |
| } |
| } else if (method.compare(WPASupplicant::kNetworkBgscanMethodNone) == 0) { |
| LOG(INFO) << "Background scan disabled -- chose None method."; |
| return; |
| } else { |
| // If the background scan method was explicitly specified, honor the |
| // configured background scan interval. |
| scan_interval = scan_interval_seconds_; |
| } |
| DCHECK(!method.empty()); |
| string config_string = StringPrintf("%s:%d:%d:%d", |
| method.c_str(), |
| bgscan_short_interval_seconds_, |
| bgscan_signal_threshold_dbm_, |
| scan_interval); |
| LOG(INFO) << "Background scan: " << config_string; |
| (*service_params)[WPASupplicant::kNetworkPropertyBgscan].writer() |
| .append_string(config_string.c_str()); |
| } |
| |
| string WiFi::GetBgscanMethod(const int &/*argument*/, Error */* error */) { |
| return bgscan_method_.empty() ? kDefaultBgscanMethod : bgscan_method_; |
| } |
| |
| void WiFi::SetBgscanMethod( |
| const int &/*argument*/, const string &method, Error *error) { |
| if (method != WPASupplicant::kNetworkBgscanMethodSimple && |
| method != WPASupplicant::kNetworkBgscanMethodLearn && |
| method != WPASupplicant::kNetworkBgscanMethodNone) { |
| const string error_message = |
| StringPrintf("Unrecognized bgscan method %s", method.c_str()); |
| LOG(WARNING) << error_message; |
| error->Populate(Error::kInvalidArguments, error_message); |
| return; |
| } |
| |
| bgscan_method_ = method; |
| // We do not update kNetworkPropertyBgscan for |pending_service_| or |
| // |current_service_|, because supplicant does not allow for |
| // reconfiguration without disconnect and reconnect. |
| } |
| |
| void WiFi::SetBgscanShortInterval(const uint16 &seconds, Error */*error*/) { |
| bgscan_short_interval_seconds_ = seconds; |
| // We do not update kNetworkPropertyBgscan for |pending_service_| or |
| // |current_service_|, because supplicant does not allow for |
| // reconfiguration without disconnect and reconnect. |
| } |
| |
| void WiFi::SetBgscanSignalThreshold(const int32 &dbm, Error */*error*/) { |
| bgscan_signal_threshold_dbm_ = dbm; |
| // We do not update kNetworkPropertyBgscan for |pending_service_| or |
| // |current_service_|, because supplicant does not allow for |
| // reconfiguration without disconnect and reconnect. |
| } |
| |
| void WiFi::SetScanInterval(const uint16 &seconds, Error */*error*/) { |
| scan_interval_seconds_ = seconds; |
| if (running()) { |
| StartScanTimer(); |
| } |
| // The scan interval affects both foreground scans (handled by |
| // |scan_timer_callback_|), and background scans (handled by |
| // supplicant). However, we do not update |pending_service_| or |
| // |current_service_|, because supplicant does not allow for |
| // reconfiguration without disconnect and reconnect. |
| } |
| |
| void WiFi::ClearBgscanMethod(const int &/*argument*/, Error */*error*/) { |
| bgscan_method_.clear(); |
| } |
| |
| void WiFi::CurrentBSSChanged(const ::DBus::Path &new_bss) { |
| SLOG(WiFi, 3) << "WiFi " << link_name() << " CurrentBSS " |
| << supplicant_bss_ << " -> " << new_bss; |
| supplicant_bss_ = new_bss; |
| has_already_completed_ = false; |
| |
| // Any change in CurrentBSS means supplicant is actively changing our |
| // connectivity. We no longer need to track any previously pending |
| // reconnect. |
| StopReconnectTimer(); |
| |
| if (new_bss == WPASupplicant::kCurrentBSSNull) { |
| HandleDisconnect(); |
| if (!provider_->GetHiddenSSIDList().empty()) { |
| // Before disconnecting, wpa_supplicant probably scanned for |
| // APs. So, in the normal case, we defer to the timer for the next scan. |
| // |
| // However, in the case of hidden SSIDs, supplicant knows about |
| // at most one of them. (That would be the hidden SSID we were |
| // connected to, if applicable.) |
| // |
| // So, in this case, we initiate an immediate scan. This scan |
| // will include the hidden SSIDs we know about (up to the limit of |
| // kScanMAxSSIDsPerScan). |
| // |
| // We may want to reconsider this immediate scan, if/when shill |
| // takes greater responsibility for scanning (vs. letting |
| // supplicant handle most of it). |
| Scan(NULL); |
| } |
| } else { |
| HandleRoam(new_bss); |
| } |
| |
| // Reset the EAP handler only after calling HandleDisconnect() above |
| // so our EAP state could be used to detect a failed authentication. |
| eap_state_handler_->Reset(); |
| |
| // If we are selecting a new service, or if we're clearing selection |
| // of a something other than the pending service, call SelectService. |
| // Otherwise skip SelectService, since this will cause the pending |
| // service to be marked as Idle. |
| if (current_service_ || selected_service() != pending_service_) { |
| SelectService(current_service_); |
| } |
| |
| // Invariant check: a Service can either be current, or pending, but |
| // not both. |
| CHECK(current_service_.get() != pending_service_.get() || |
| current_service_.get() == NULL); |
| |
| // If we are no longer debugging a problematic WiFi connection, return |
| // to the debugging level indicated by the WiFi debugging scope. |
| if ((!current_service_ || !current_service_->HasRecentConnectionIssues()) && |
| (!pending_service_ || !pending_service_->HasRecentConnectionIssues())) { |
| SetConnectionDebugging(false); |
| } |
| } |
| |
| void WiFi::HandleDisconnect() { |
| // Identify the affected service. We expect to get a disconnect |
| // event when we fall off a Service that we were connected |
| // to. However, we also allow for the case where we get a disconnect |
| // event while attempting to connect from a disconnected state. |
| WiFiService *affected_service = |
| current_service_.get() ? current_service_.get() : pending_service_.get(); |
| |
| current_service_ = NULL; |
| if (!affected_service) { |
| SLOG(WiFi, 2) << "WiFi " << link_name() |
| << " disconnected while not connected or connecting"; |
| return; |
| } |
| if (affected_service == selected_service()) { |
| // If our selected service has disconnected, destroy IP configuration state. |
| DropConnection(); |
| } |
| |
| Error error; |
| if (!DisableNetworkForService(affected_service, &error)) { |
| if (error.type() == Error::kNotFound) { |
| SLOG(WiFi, 2) << "WiFi " << link_name() << " disconnected from " |
| << " (or failed to connect to) service " |
| << affected_service->unique_name() << ", " |
| << "but could not find supplicant network to disable."; |
| } else { |
| LOG(FATAL) << "DisableNetwork failed."; |
| } |
| } |
| |
| SLOG(WiFi, 2) << "WiFi " << link_name() << " disconnected from " |
| << " (or failed to connect to) service " |
| << affected_service->unique_name(); |
| Service::ConnectFailure failure; |
| if (SuspectCredentials(*affected_service, &failure)) { |
| // If we suspect bad credentials, set failure, to trigger an error |
| // mole in Chrome. |
| affected_service->SetFailure(failure); |
| LOG(ERROR) << "Connection failure is due to suspect credentials: returning " |
| << Service::ConnectFailureToString(failure); |
| } else { |
| affected_service->SetFailureSilent(Service::kFailureUnknown); |
| } |
| affected_service->NotifyCurrentEndpoint(NULL); |
| metrics()->NotifyServiceDisconnect(affected_service); |
| |
| if (affected_service == pending_service_.get()) { |
| // The attempt to connect to |pending_service_| failed. Clear |
| // |pending_service_|, to indicate we're no longer in the middle |
| // of a connect request. |
| SetPendingService(NULL); |
| } else if (pending_service_.get()) { |
| // We've attributed the disconnection to what was the |
| // |current_service_|, rather than the |pending_service_|. |
| // |
| // If we're wrong about that (i.e. supplicant reported this |
| // CurrentBSS change after attempting to connect to |
| // |pending_service_|), we're depending on supplicant to retry |
| // connecting to |pending_service_|, and delivering another |
| // CurrentBSS change signal in the future. |
| // |
| // Log this fact, to help us debug (in case our assumptions are |
| // wrong). |
| SLOG(WiFi, 2) << "WiFi " << link_name() << " pending connection to service " |
| << pending_service_->unique_name() |
| << " after disconnect"; |
| } |
| |
| // If we disconnect, initially scan at a faster frequency, to make sure |
| // we've found all available APs. |
| RestartFastScanAttempts(); |
| } |
| |
| // We use the term "Roam" loosely. In particular, we include the case |
| // where we "Roam" to a BSS from the disconnected state. |
| void WiFi::HandleRoam(const ::DBus::Path &new_bss) { |
| EndpointMap::iterator endpoint_it = endpoint_by_rpcid_.find(new_bss); |
| if (endpoint_it == endpoint_by_rpcid_.end()) { |
| LOG(WARNING) << "WiFi " << link_name() << " connected to unknown BSS " |
| << new_bss; |
| return; |
| } |
| |
| const WiFiEndpointConstRefPtr endpoint(endpoint_it->second); |
| WiFiServiceRefPtr service = provider_->FindServiceForEndpoint(endpoint); |
| if (!service.get()) { |
| LOG(WARNING) << "WiFi " << link_name() |
| << " could not find Service for Endpoint " |
| << endpoint->bssid_string() |
| << " (service will be unchanged)"; |
| return; |
| } |
| |
| SLOG(WiFi, 2) << "WiFi " << link_name() |
| << " roamed to Endpoint " << endpoint->bssid_string() |
| << " " << LogSSID(endpoint->ssid_string()); |
| |
| service->NotifyCurrentEndpoint(endpoint); |
| |
| if (pending_service_.get() && |
| service.get() != pending_service_.get()) { |
| // The Service we've roamed on to is not the one we asked for. |
| // We assume that this is transient, and that wpa_supplicant |
| // is trying / will try to connect to |pending_service_|. |
| // |
| // If it succeeds, we'll end up back here, but with |service| |
| // pointing at the same service as |pending_service_|. |
| // |
| // If it fails, we'll process things in HandleDisconnect. |
| // |
| // So we leave |pending_service_| untouched. |
| SLOG(WiFi, 2) << "WiFi " << link_name() |
| << " new current Endpoint " |
| << endpoint->bssid_string() |
| << " is not part of pending service " |
| << pending_service_->unique_name(); |
| |
| // Sanity check: if we didn't roam onto |pending_service_|, we |
| // should still be on |current_service_|. |
| if (service.get() != current_service_.get()) { |
| LOG(WARNING) << "WiFi " << link_name() |
| << " new current Endpoint " |
| << endpoint->bssid_string() |
| << " is neither part of pending service " |
| << pending_service_->unique_name() |
| << " nor part of current service " |
| << (current_service_ ? |
| current_service_->unique_name() : |
| "(NULL)"); |
| // Although we didn't expect to get here, we should keep |
| // |current_service_| in sync with what supplicant has done. |
| current_service_ = service; |
| } |
| return; |
| } |
| |
| if (pending_service_.get()) { |
| // We assume service.get() == pending_service_.get() here, because |
| // of the return in the previous if clause. |
| // |
| // Boring case: we've connected to the service we asked |
| // for. Simply update |current_service_| and |pending_service_|. |
| current_service_ = service; |
| SetPendingService(NULL); |
| return; |
| } |
| |
| // |pending_service_| was NULL, so we weren't attempting to connect |
| // to a new Service. Sanity check that we're still on |
| // |current_service_|. |
| if (service.get() != current_service_.get()) { |
| LOG(WARNING) |
| << "WiFi " << link_name() |
| << " new current Endpoint " |
| << endpoint->bssid_string() |
| << (current_service_.get() ? |
| StringPrintf(" is not part of current service %s", |
| current_service_->unique_name().c_str()) : |
| " with no current service"); |
| // We didn't expect to be here, but let's cope as well as we |
| // can. Update |current_service_| to keep it in sync with |
| // supplicant. |
| current_service_ = service; |
| |
| // If this service isn't already marked as actively connecting (likely, |
| // since this service is a bit of a surprise) set the service as |
| // associating. |
| if (!current_service_->IsConnecting()) { |
| current_service_->SetState(Service::kStateAssociating); |
| } |
| |
| return; |
| } |
| |
| // At this point, we know that |pending_service_| was NULL, and that |
| // we're still on |current_service_|. This is the most boring case |
| // of all, because there's no state to update here. |
| return; |
| } |
| |
| string WiFi::FindNetworkRpcidForService( |
| const WiFiService *service, Error *error) { |
| ReverseServiceMap::const_iterator rpcid_it = |
| rpcid_by_service_.find(service); |
| if (rpcid_it == rpcid_by_service_.end()) { |
| const string error_message = |
| StringPrintf( |
| "WiFi %s cannot find supplicant network rpcid for service %s", |
| link_name().c_str(), service->unique_name().c_str()); |
| // There are contexts where this is not an error, such as when a service |
| // is clearing whatever cached credentials may not exist. |
| SLOG(WiFi, 2) << error_message; |
| if (error) { |
| error->Populate(Error::kNotFound, error_message); |
| } |
| return ""; |
| } |
| |
| return rpcid_it->second; |
| } |
| |
| bool WiFi::DisableNetworkForService(const WiFiService *service, Error *error) { |
| string rpcid = FindNetworkRpcidForService(service, error); |
| if (rpcid.empty()) { |
| // Error is already populated. |
| return false; |
| } |
| |
| if (!DisableNetwork(rpcid)) { |
| const string error_message = |
| StringPrintf("WiFi %s cannot disable network for service %s: " |
| "DBus operation failed for rpcid %s.", |
| link_name().c_str(), service->unique_name().c_str(), |
| rpcid.c_str()); |
| Error::PopulateAndLog(error, Error::kOperationFailed, error_message); |
| |
| // Make sure that such errored networks are removed, so problems do not |
| // propogate to future connection attempts. |
| RemoveNetwork(rpcid); |
| rpcid_by_service_.erase(service); |
| |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool WiFi::RemoveNetworkForService(const WiFiService *service, Error *error) { |
| string rpcid = FindNetworkRpcidForService(service, error); |
| if (rpcid.empty()) { |
| // Error is already populated. |
| return false; |
| } |
| |
| // Erase the rpcid from our tables regardless of failure below, since even |
| // if in failure, we never want to use this network again. |
| rpcid_by_service_.erase(service); |
| |
| // TODO(quiche): Reconsider giving up immediately. Maybe give |
| // wpa_supplicant some time to retry, first. |
| if (!RemoveNetwork(rpcid)) { |
| const string error_message = |
| StringPrintf("WiFi %s cannot remove network for service %s: " |
| "DBus operation failed for rpcid %s.", |
| link_name().c_str(), service->unique_name().c_str(), |
| rpcid.c_str()); |
| Error::PopulateAndLog(error, Error::kOperationFailed, error_message); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| void WiFi::BSSAddedTask( |
| const ::DBus::Path &path, |
| const map<string, ::DBus::Variant> &properties) { |
| // Note: we assume that BSSIDs are unique across endpoints. This |
| // means that if an AP reuses the same BSSID for multiple SSIDs, we |
| // lose. |
| WiFiEndpointRefPtr endpoint( |
| new WiFiEndpoint(proxy_factory_, this, path, properties)); |
| SLOG(WiFi, 1) << "Found endpoint. " |
| << "RPC path: " << path << ", " |
| << LogSSID(endpoint->ssid_string()) << ", " |
| << "bssid: " << endpoint->bssid_string() << ", " |
| << "signal: " << endpoint->signal_strength() << ", " |
| << "security: " << endpoint->security_mode() << ", " |
| << "frequency: " << endpoint->frequency(); |
| |
| if (endpoint->ssid_string().empty()) { |
| // Don't bother trying to find or create a Service for an Endpoint |
| // without an SSID. We wouldn't be able to connect to it anyway. |
| return; |
| } |
| |
| if (endpoint->ssid()[0] == 0) { |
| // Assume that an SSID starting with NULL is bogus/misconfigured, |
| // and filter it out. |
| return; |
| } |
| |
| provider_->OnEndpointAdded(endpoint); |
| |
| // Do this last, to maintain the invariant that any Endpoint we |
| // know about has a corresponding Service. |
| // |
| // TODO(quiche): Write test to verify correct behavior in the case |
| // where we get multiple BSSAdded events for a single endpoint. |
| // (Old Endpoint's refcount should fall to zero, and old Endpoint |
| // should be destroyed.) |
| endpoint_by_rpcid_[path] = endpoint; |
| endpoint->Start(); |
| } |
| |
| void WiFi::BSSRemovedTask(const ::DBus::Path &path) { |
| EndpointMap::iterator i = endpoint_by_rpcid_.find(path); |
| if (i == endpoint_by_rpcid_.end()) { |
| LOG(WARNING) << "WiFi " << link_name() |
| << " could not find BSS " << path |
| << " to remove."; |
| return; |
| } |
| |
| WiFiEndpointRefPtr endpoint = i->second; |
| CHECK(endpoint); |
| endpoint_by_rpcid_.erase(i); |
| |
| WiFiServiceRefPtr service = provider_->OnEndpointRemoved(endpoint); |
| if (!service) { |
| return; |
| } |
| Error unused_error; |
| RemoveNetworkForService(service, &unused_error); |
| |
| bool disconnect_service = !service->HasEndpoints() && |
| (service->IsConnecting() || service->IsConnected()); |
| |
| if (disconnect_service) { |
| DisconnectFrom(service); |
| } |
| } |
| |
| void WiFi::CertificationTask( |
| const map<string, ::DBus::Variant> &properties) { |
| if (!current_service_) { |
| LOG(ERROR) << "WiFi " << link_name() << " " << __func__ |
| << " with no current service."; |
| return; |
| } |
| |
| string subject; |
| uint32 depth; |
| if (WPASupplicant::ExtractRemoteCertification(properties, &subject, &depth)) { |
| current_service_->AddEAPCertification(subject, depth); |
| } |
| } |
| |
| void WiFi::EAPEventTask(const string &status, const string ¶meter) { |
| if (!current_service_) { |
| LOG(ERROR) << "WiFi " << link_name() << " " << __func__ |
| << " with no current service."; |
| return; |
| } |
| Service::ConnectFailure failure = Service::kFailureUnknown; |
| eap_state_handler_->ParseStatus(status, parameter, &failure); |
| if (failure != Service::kFailureUnknown) { |
| // Avoid a reporting failure twice by resetting EAP state handler early. |
| eap_state_handler_->Reset(); |
| Error unused_error; |
| current_service_->DisconnectWithFailure(failure, &unused_error); |
| } |
| } |
| |
| void WiFi::PropertiesChangedTask( |
| const map<string, ::DBus::Variant> &properties) { |
| // TODO(quiche): Handle changes in other properties (e.g. signal |
| // strength). |
| |
| // Note that order matters here. In particular, we want to process |
| // changes in the current BSS before changes in state. This is so |
| // that we update the state of the correct Endpoint/Service. |
| |
| map<string, ::DBus::Variant>::const_iterator properties_it = |
| properties.find(WPASupplicant::kInterfacePropertyCurrentBSS); |
| if (properties_it != properties.end()) { |
| CurrentBSSChanged(properties_it->second.reader().get_path()); |
| } |
| |
| properties_it = properties.find(WPASupplicant::kInterfacePropertyState); |
| if (properties_it != properties.end()) { |
| StateChanged(properties_it->second.reader().get_string()); |
| } |
| } |
| |
| void WiFi::ScanDoneTask() { |
| SLOG(WiFi, 2) << __func__ << " need_bss_flush_ " << need_bss_flush_; |
| if (need_bss_flush_) { |
| CHECK(supplicant_interface_proxy_ != NULL); |
| // Compute |max_age| relative to |resumed_at_|, to account for the |
| // time taken to scan. |
| struct timeval now; |
| uint32_t max_age; |
| time_->GetTimeMonotonic(&now); |
| max_age = kMaxBSSResumeAgeSeconds + (now.tv_sec - resumed_at_.tv_sec); |
| supplicant_interface_proxy_->FlushBSS(max_age); |
| need_bss_flush_ = false; |
| } |
| SetScanPending(false); |
| StartScanTimer(); |
| } |
| |
| void WiFi::ScanTask() { |
| SLOG(WiFi, 2) << "WiFi " << link_name() << " scan requested."; |
| if (!enabled()) { |
| SLOG(WiFi, 2) << "Ignoring scan request while device is not enabled."; |
| return; |
| } |
| if (!supplicant_present_ || !supplicant_interface_proxy_.get()) { |
| SLOG(WiFi, 2) << "Ignoring scan request while supplicant is not present."; |
| return; |
| } |
| if ((pending_service_.get() && pending_service_->IsConnecting()) || |
| (current_service_.get() && current_service_->IsConnecting())) { |
| SLOG(WiFi, 2) << "Ignoring scan request while connecting to an AP."; |
| return; |
| } |
| map<string, DBus::Variant> scan_args; |
| scan_args[WPASupplicant::kPropertyScanType].writer(). |
| append_string(WPASupplicant::kScanTypeActive); |
| |
| ByteArrays hidden_ssids = provider_->GetHiddenSSIDList(); |
| if (!hidden_ssids.empty()) { |
| // TODO(pstew): Devise a better method for time-sharing with SSIDs that do |
| // not fit in. |
| if (hidden_ssids.size() >= WPASupplicant::kScanMaxSSIDsPerScan) { |
| hidden_ssids.erase( |
| hidden_ssids.begin() + WPASupplicant::kScanMaxSSIDsPerScan - 1, |
| hidden_ssids.end()); |
| } |
| // Add Broadcast SSID, signified by an empty ByteArray. If we specify |
| // SSIDs to wpa_supplicant, we need to explicitly specify the default |
| // behavior of doing a broadcast probe. |
| hidden_ssids.push_back(ByteArray()); |
| |
| scan_args[WPASupplicant::kPropertyScanSSIDs] = |
| DBusAdaptor::ByteArraysToVariant(hidden_ssids); |
| } |
| |
| try { |
| supplicant_interface_proxy_->Scan(scan_args); |
| SetScanPending(true); |
| } catch (const DBus::Error &e) { // NOLINT |
| // A scan may fail if, for example, the wpa_supplicant vanishing |
| // notification is posted after this task has already started running. |
| LOG(WARNING) << "Scan failed: " << e.what(); |
| } |
| } |
| |
| void WiFi::SetScanPending(bool pending) { |
| if (scan_pending_ != pending) { |
| scan_pending_ = pending; |
| adaptor()->EmitBoolChanged(flimflam::kScanningProperty, pending); |
| } |
| } |
| |
| string WiFi::GetServiceLeaseName(const WiFiService &service) { |
| return service.GetStorageIdentifier(); |
| } |
| |
| void WiFi::DestroyServiceLease(const WiFiService &service) { |
| DestroyIPConfigLease(GetServiceLeaseName(service)); |
| } |
| |
| void WiFi::StateChanged(const string &new_state) { |
| const string old_state = supplicant_state_; |
| supplicant_state_ = new_state; |
| LOG(INFO) << "WiFi " << link_name() << " " << __func__ << " " |
| << old_state << " -> " << new_state; |
| |
| WiFiService *affected_service; |
| // Identify the service to which the state change applies. If |
| // |pending_service_| is non-NULL, then the state change applies to |
| // |pending_service_|. Otherwise, it applies to |current_service_|. |
| // |
| // This policy is driven by the fact that the |pending_service_| |
| // doesn't become the |current_service_| until wpa_supplicant |
| // reports a CurrentBSS change to the |pending_service_|. And the |
| // CurrentBSS change won't be reported until the |pending_service_| |
| // reaches the WPASupplicant::kInterfaceStateCompleted state. |
| affected_service = |
| pending_service_.get() ? pending_service_.get() : current_service_.get(); |
| if (!affected_service) { |
| SLOG(WiFi, 2) << "WiFi " << link_name() << " " << __func__ |
| << " with no service"; |
| return; |
| } |
| |
| if (new_state == WPASupplicant::kInterfaceStateCompleted) { |
| if (affected_service->IsConnected()) { |
| StopReconnectTimer(); |
| EnableHighBitrates(); |
| } else if (has_already_completed_) { |
| LOG(INFO) << link_name() << " L3 configuration already started."; |
| } else if (AcquireIPConfigWithLeaseName( |
| GetServiceLeaseName(*affected_service))) { |
| LOG(INFO) << link_name() << " is up; started L3 configuration."; |
| affected_service->SetState(Service::kStateConfiguring); |
| } else { |
| LOG(ERROR) << "Unable to acquire DHCP config."; |
| } |
| has_already_completed_ = true; |
| } else if (new_state == WPASupplicant::kInterfaceStateAssociated) { |
| affected_service->SetState(Service::kStateAssociating); |
| } else if (new_state == WPASupplicant::kInterfaceStateAuthenticating || |
| new_state == WPASupplicant::kInterfaceStateAssociating || |
| new_state == WPASupplicant::kInterfaceState4WayHandshake || |
| new_state == WPASupplicant::kInterfaceStateGroupHandshake) { |
| // Ignore transitions into these states from Completed, to avoid |
| // bothering the user when roaming, or re-keying. |
| if (old_state != WPASupplicant::kInterfaceStateCompleted) |
| affected_service->SetState(Service::kStateAssociating); |
| // TOOD(quiche): On backwards transitions, we should probably set |
| // a timeout for getting back into the completed state. At present, |
| // we depend on wpa_supplicant eventually reporting that CurrentBSS |
| // has changed. But there may be cases where that signal is not sent. |
| // (crosbug.com/23207) |
| } else if (new_state == WPASupplicant::kInterfaceStateDisconnected && |
| affected_service == current_service_ && |
| affected_service->IsConnected()) { |
| // This means that wpa_supplicant failed in a re-connect attempt, but |
| // may still be reconnecting. Give wpa_supplicant a limited amount of |
| // time to transition out this condition by either connecting or changing |
| // CurrentBSS. |
| StartReconnectTimer(); |
| } else { |
| // Other transitions do not affect Service state. |
| // |
| // Note in particular that we ignore a State change into |
| // kInterfaceStateDisconnected, in favor of observing the corresponding |
| // change in CurrentBSS. |
| } |
| } |
| |
| bool WiFi::SuspectCredentials( |
| const WiFiService &service, Service::ConnectFailure *failure) const { |
| if (service.IsSecurityMatch(flimflam::kSecurityPsk)) { |
| if (supplicant_state_ == WPASupplicant::kInterfaceState4WayHandshake && |
| !service.has_ever_connected()) { |
| if (failure) { |
| *failure = Service::kFailureBadPassphrase; |
| } |
| return true; |
| } |
| } else if (service.IsSecurityMatch(flimflam::kSecurity8021x)) { |
| if (eap_state_handler_->is_eap_in_progress() && |
| !service.has_ever_connected()) { |
| if (failure) { |
| *failure = Service::kFailureEAPAuthentication; |
| } |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| // static |
| bool WiFi::SanitizeSSID(string *ssid) { |
| CHECK(ssid); |
| |
| size_t ssid_len = ssid->length(); |
| size_t i; |
| bool changed = false; |
| |
| for (i = 0; i < ssid_len; ++i) { |
| if (!g_ascii_isprint((*ssid)[i])) { |
| (*ssid)[i] = '?'; |
| changed = true; |
| } |
| } |
| |
| return changed; |
| } |
| |
| // static |
| string WiFi::LogSSID(const string &ssid) { |
| string out; |
| for (string::const_iterator it = ssid.begin(); it != ssid.end(); ++it) { |
| // Replace '[' and ']' (in addition to non-printable characters) so that |
| // it's easy to match the right substring through a non-greedy regex. |
| if (*it == '[' || *it == ']' || !g_ascii_isprint(*it)) { |
| base::StringAppendF(&out, "\\x%02x", *it); |
| } else { |
| out += *it; |
| } |
| } |
| return StringPrintf("[SSID=%s]", out.c_str()); |
| } |
| |
| void WiFi::OnLinkMonitorFailure() { |
| // If we have never found the gateway, let's be conservative and not |
| // do anything, in case this network topology does not have a gateway. |
| if (!link_monitor()->IsGatewayFound()) { |
| LOG(INFO) << "In " << __func__ << "(): " |
| << "Skipping reassociate since gateway was never found."; |
| return; |
| } |
| |
| if (!supplicant_present_) { |
| LOG(ERROR) << "In " << __func__ << "(): " |
| << "wpa_supplicant is not present. Cannot reassociate."; |
| return; |
| } |
| |
| try { |
| // This will force a transition out of connected, if we are actually |
| // connected. |
| supplicant_interface_proxy_->Reassociate(); |
| // If we don't eventually get a transition back into a connected state, |
| // there is something wrong. |
| StartReconnectTimer(); |
| LOG(INFO) << "In " << __func__ << "(): Called Reassociate()."; |
| } catch (const DBus::Error &e) { // NOLINT |
| LOG(ERROR) << "In " << __func__ << "(): failed to call Reassociate()."; |
| return; |
| } |
| } |
| |
| bool WiFi::ShouldUseArpGateway() const { |
| return true; |
| } |
| |
| void WiFi::DisassociateFromService(const WiFiServiceRefPtr &service) { |
| DisconnectFrom(service); |
| if (service == selected_service()) { |
| DropConnection(); |
| } |
| Error unused_error; |
| RemoveNetworkForService(service, &unused_error); |
| } |
| |
| vector<GeolocationInfo> WiFi::GetGeolocationObjects() const { |
| vector<GeolocationInfo> objects; |
| for (EndpointMap::const_iterator it = endpoint_by_rpcid_.begin(); |
| it != endpoint_by_rpcid_.end(); |
| ++it) { |
| GeolocationInfo geoinfo; |
| WiFiEndpointRefPtr endpoint = it->second; |
| geoinfo.AddField(kGeoMacAddressProperty, endpoint->bssid_string()); |
| geoinfo.AddField(kGeoSignalStrengthProperty, |
| StringPrintf("%d", endpoint->signal_strength())); |
| geoinfo.AddField( |
| kGeoChannelProperty, |
| StringPrintf("%d", |
| Metrics::WiFiFrequencyToChannel(endpoint->frequency()))); |
| // TODO(gauravsh): Include age field. crosbug.com/35445 |
| objects.push_back(geoinfo); |
| } |
| return objects; |
| } |
| |
| void WiFi::HelpRegisterDerivedInt32( |
| PropertyStore *store, |
| const string &name, |
| int32(WiFi::*get)(Error *error), |
| void(WiFi::*set)(const int32 &value, Error *error)) { |
| store->RegisterDerivedInt32( |
| name, |
| Int32Accessor(new CustomAccessor<WiFi, int32>(this, get, set))); |
| } |
| |
| void WiFi::HelpRegisterDerivedUint16( |
| PropertyStore *store, |
| const string &name, |
| uint16(WiFi::*get)(Error *error), |
| void(WiFi::*set)(const uint16 &value, Error *error)) { |
| store->RegisterDerivedUint16( |
| name, |
| Uint16Accessor(new CustomAccessor<WiFi, uint16>(this, get, set))); |
| } |
| |
| void WiFi::OnAfterResume() { |
| LOG(INFO) << __func__; |
| Device::OnAfterResume(); // May refresh ipconfig_ |
| |
| // We want to flush the BSS cache, but we don't want to conflict |
| // with a running scan or an active connection attempt. So record |
| // the need to flush, and take care of flushing when the next scan |
| // completes. |
| // |
| // Note that supplicant will automatically expire old cache |
| // entries (after, e.g., a BSS is not found in two consecutive |
| // scans). However, our explicit flush accelerates re-association |
| // in cases where a BSS disappeared while we were asleep. (See, |
| // e.g. WiFiRoaming.005SuspendRoam.) |
| time_->GetTimeMonotonic(&resumed_at_); |
| need_bss_flush_ = true; |
| |
| if (!scan_pending_ && IsIdle()) { |
| // Not scanning/connecting/connected, so let's get things rolling. |
| Scan(NULL); |
| } else { |
| SLOG(WiFi, 1) << __func__ |
| << " skipping scan, already scanning or connected."; |
| } |
| } |
| |
| void WiFi::OnConnected() { |
| Device::OnConnected(); |
| EnableHighBitrates(); |
| } |
| |
| void WiFi::RestartFastScanAttempts() { |
| fast_scans_remaining_ = kNumFastScanAttempts; |
| StartScanTimer(); |
| } |
| |
| void WiFi::StartScanTimer() { |
| if (scan_interval_seconds_ == 0) { |
| StopScanTimer(); |
| return; |
| } |
| scan_timer_callback_.Reset( |
| Bind(&WiFi::ScanTimerHandler, weak_ptr_factory_.GetWeakPtr())); |
| // Repeat the first few scans after disconnect relatively quickly so we |
| // have reasonable trust that no APs we are looking for are present. |
| dispatcher()->PostDelayedTask(scan_timer_callback_.callback(), |
| fast_scans_remaining_ > 0 ? |
| kFastScanIntervalSeconds * 1000 : scan_interval_seconds_ * 1000); |
| } |
| |
| void WiFi::StopScanTimer() { |
| scan_timer_callback_.Cancel(); |
| } |
| |
| void WiFi::ScanTimerHandler() { |
| SLOG(WiFi, 2) << "WiFi Device " << link_name() << ": " << __func__; |
| if (IsIdle() && !scan_pending_) { |
| Scan(NULL); |
| if (fast_scans_remaining_ > 0) { |
| --fast_scans_remaining_; |
| } |
| } |
| StartScanTimer(); |
| } |
| |
| void WiFi::StartPendingTimer() { |
| pending_timeout_callback_.Reset( |
| Bind(&WiFi::PendingTimeoutHandler, weak_ptr_factory_.GetWeakPtr())); |
| dispatcher()->PostDelayedTask(pending_timeout_callback_.callback(), |
| kPendingTimeoutSeconds * 1000); |
| } |
| |
| void WiFi::StopPendingTimer() { |
| pending_timeout_callback_.Cancel(); |
| } |
| |
| void WiFi::SetPendingService(const WiFiServiceRefPtr &service) { |
| SLOG(WiFi, 2) << "WiFi " << link_name() << " setting pending service to " |
| << (service ? service->unique_name(): "NULL"); |
| if (service) { |
| service->SetState(Service::kStateAssociating); |
| StartPendingTimer(); |
| } else if (pending_service_) { |
| StopPendingTimer(); |
| } |
| pending_service_ = service; |
| } |
| |
| void WiFi::PendingTimeoutHandler() { |
| Error unused_error; |
| LOG(INFO) << "WiFi Device " << link_name() << ": " << __func__; |
| CHECK(pending_service_); |
| pending_service_->DisconnectWithFailure( |
| Service::kFailureOutOfRange, &unused_error); |
| } |
| |
| void WiFi::StartReconnectTimer() { |
| if (!reconnect_timeout_callback_.IsCancelled()) { |
| LOG(INFO) << "WiFi Device " << link_name() << ": " << __func__ |
| << ": reconnect timer already running."; |
| return; |
| } |
| LOG(INFO) << "WiFi Device " << link_name() << ": " << __func__; |
| reconnect_timeout_callback_.Reset( |
| Bind(&WiFi::ReconnectTimeoutHandler, weak_ptr_factory_.GetWeakPtr())); |
| dispatcher()->PostDelayedTask(reconnect_timeout_callback_.callback(), |
| kReconnectTimeoutSeconds * 1000); |
| } |
| |
| void WiFi::StopReconnectTimer() { |
| SLOG(WiFi, 2) << "WiFi Device " << link_name() << ": " << __func__; |
| reconnect_timeout_callback_.Cancel(); |
| } |
| |
| void WiFi::ReconnectTimeoutHandler() { |
| LOG(INFO) << "WiFi Device " << link_name() << ": " << __func__; |
| reconnect_timeout_callback_.Cancel(); |
| CHECK(current_service_); |
| current_service_->SetFailureSilent(Service::kFailureConnect); |
| DisconnectFrom(current_service_); |
| } |
| |
| void WiFi::OnSupplicantAppear(const string &/*owner*/) { |
| LOG(INFO) << "WPA supplicant appeared."; |
| if (supplicant_present_) { |
| // Restart the WiFi device if it's started already. This will reset the |
| // state and connect the device to the new WPA supplicant instance. |
| if (enabled()) { |
| Restart(); |
| } |
| return; |
| } |
| supplicant_present_ = true; |
| ConnectToSupplicant(); |
| } |
| |
| void WiFi::OnSupplicantVanish() { |
| LOG(INFO) << "WPA supplicant vanished."; |
| if (!supplicant_present_) { |
| return; |
| } |
| supplicant_present_ = false; |
| // Restart the WiFi device if it's started already. This will effectively |
| // suspend the device until the WPA supplicant reappears. |
| if (enabled()) { |
| Restart(); |
| } |
| } |
| |
| void WiFi::OnWiFiDebugScopeChanged(bool enabled) { |
| SLOG(WiFi, 2) << "WiFi debug scope changed; enable is now " << enabled; |
| if (!supplicant_process_proxy_.get()) { |
| SLOG(WiFi, 2) << "Suplicant process proxy not present."; |
| return; |
| } |
| string current_level; |
| try { |
| current_level = supplicant_process_proxy_->GetDebugLevel(); |
| } catch (const DBus::Error &e) { // NOLINT |
| LOG(ERROR) << __func__ << ": Failed to get wpa_supplicant debug level."; |
| return; |
| } |
| |
| if (current_level != WPASupplicant::kDebugLevelInfo && |
| current_level != WPASupplicant::kDebugLevelDebug) { |
| SLOG(WiFi, 2) << "WiFi debug level is currently " |
| << current_level |
| << "; assuming that it is being controlled elsewhere."; |
| return; |
| } |
| string new_level = enabled ? WPASupplicant::kDebugLevelDebug : |
| WPASupplicant::kDebugLevelInfo; |
| |
| if (new_level == current_level) { |
| SLOG(WiFi, 2) << "WiFi debug level is already the desired level " |
| << current_level; |
| return; |
| } |
| |
| try { |
| supplicant_process_proxy_->SetDebugLevel(new_level); |
| } catch (const DBus::Error &e) { // NOLINT |
| LOG(ERROR) << __func__ << ": Failed to set wpa_supplicant debug level."; |
| } |
| } |
| |
| void WiFi::SetConnectionDebugging(bool enabled) { |
| if (is_debugging_connection_ == enabled) { |
| return; |
| } |
| OnWiFiDebugScopeChanged( |
| enabled || |
| ScopeLogger::GetInstance()->IsScopeEnabled(ScopeLogger::kWiFi)); |
| is_debugging_connection_ = enabled; |
| } |
| |
| void WiFi::ConnectToSupplicant() { |
| LOG(INFO) << link_name() << ": " << (enabled() ? "enabled" : "disabled") |
| << " supplicant: " |
| << (supplicant_present_ ? "present" : "absent") |
| << " proxy: " |
| << (supplicant_process_proxy_.get() ? "non-null" : "null"); |
| if (!enabled() || !supplicant_present_ || supplicant_process_proxy_.get()) { |
| return; |
| } |
| supplicant_process_proxy_.reset( |
| proxy_factory_->CreateSupplicantProcessProxy( |
| WPASupplicant::kDBusPath, WPASupplicant::kDBusAddr)); |
| OnWiFiDebugScopeChanged( |
| ScopeLogger::GetInstance()->IsScopeEnabled(ScopeLogger::kWiFi)); |
| ::DBus::Path interface_path; |
| try { |
| map<string, DBus::Variant> create_interface_args; |
| create_interface_args[WPASupplicant::kInterfacePropertyName].writer(). |
| append_string(link_name().c_str()); |
| create_interface_args[WPASupplicant::kInterfacePropertyDriver].writer(). |
| append_string(WPASupplicant::kDriverNL80211); |
| create_interface_args[ |
| WPASupplicant::kInterfacePropertyConfigFile].writer(). |
| append_string(WPASupplicant::kSupplicantConfPath); |
| interface_path = |
| supplicant_process_proxy_->CreateInterface(create_interface_args); |
| } catch (const DBus::Error &e) { // NOLINT |
| if (!strcmp(e.name(), WPASupplicant::kErrorInterfaceExists)) { |
| interface_path = |
| supplicant_process_proxy_->GetInterface(link_name()); |
| // TODO(quiche): Is it okay to crash here, if device is missing? |
| } else { |
| LOG(ERROR) << __func__ << ": Failed to create interface with supplicant."; |
| return; |
| } |
| } |
| |
| supplicant_interface_proxy_.reset( |
| proxy_factory_->CreateSupplicantInterfaceProxy( |
| this, interface_path, WPASupplicant::kDBusAddr)); |
| |
| RTNLHandler::GetInstance()->SetInterfaceFlags(interface_index(), IFF_UP, |
| IFF_UP); |
| // TODO(quiche) Set ApScan=1 and BSSExpireAge=190, like flimflam does? |
| |
| // Clear out any networks that might previously have been configured |
| // for this interface. |
| supplicant_interface_proxy_->RemoveAllNetworks(); |
| |
| // Flush interface's BSS cache, so that we get BSSAdded signals for |
| // all BSSes (not just new ones since the last scan). |
| supplicant_interface_proxy_->FlushBSS(0); |
| |
| try { |
| // TODO(pstew): Disable fast_reauth until supplicant can properly deal |
| // with RADIUS servers that respond strangely to such requests. |
| // crosbug.com/25630 |
| supplicant_interface_proxy_->SetFastReauth(false); |
| } catch (const DBus::Error &e) { // NOLINT |
| LOG(ERROR) << "Failed to disable fast_reauth. " |
| << "May be running an older version of wpa_supplicant."; |
| } |
| |
| try { |
| // Helps with passing WiFiRomaing.001SSIDSwitchBack. |
| supplicant_interface_proxy_->SetScanInterval(kRescanIntervalSeconds); |
| } catch (const DBus::Error &e) { // NOLINT |
| LOG(ERROR) << "Failed to set scan_interval. " |
| << "May be running an older version of wpa_supplicant."; |
| } |
| |
| try { |
| supplicant_interface_proxy_->SetDisableHighBitrates(true); |
| } catch (const DBus::Error &e) { // NOLINT |
| LOG(ERROR) << "Failed to disable high bitrates. " |
| << "May be running an older version of wpa_supplicant."; |
| } |
| |
| Scan(NULL); |
| StartScanTimer(); |
| } |
| |
| void WiFi::EnableHighBitrates() { |
| LOG(INFO) << "Enabling high bitrates."; |
| try { |
| supplicant_interface_proxy_->EnableHighBitrates(); |
| } catch (const DBus::Error &e) { // NOLINT |
| LOG(ERROR) << "exception while enabling high rates: " << e.what(); |
| } |
| } |
| |
| void WiFi::Restart() { |
| LOG(INFO) << link_name() << " restarting."; |
| WiFiRefPtr me = this; // Make sure we don't get destructed. |
| // Go through the manager rather than starting and stopping the device |
| // directly so that the device can be configured with the profile. |
| manager()->DeregisterDevice(me); |
| manager()->RegisterDevice(me); |
| } |
| |
| } // namespace shill |