Merge "ziparchive: Allow ExtractEntryToFile() to work with block device." am: 787482ecd9 am: af2a8858c4 am: 9b1b0627b9
am: 87cbd3aaf9
Change-Id: I490b2e9098288c98b5397c72d9aad451ad4a8793
diff --git a/fs_mgr/fs_mgr.c b/fs_mgr/fs_mgr.c
index d570255..b1511fe 100644
--- a/fs_mgr/fs_mgr.c
+++ b/fs_mgr/fs_mgr.c
@@ -241,7 +241,7 @@
return ret;
}
-static int fs_match(char *in1, char *in2)
+static int fs_match(const char *in1, const char *in2)
{
char *n1;
char *n2;
@@ -651,7 +651,7 @@
* If multiple fstab entries are to be mounted on "n_name", it will try to mount each one
* in turn, and stop on 1st success, or no more match.
*/
-int fs_mgr_do_mount(struct fstab *fstab, char *n_name, char *n_blk_device,
+int fs_mgr_do_mount(struct fstab *fstab, const char *n_name, char *n_blk_device,
char *tmp_mount_point)
{
int i = 0;
diff --git a/fs_mgr/fs_mgr_main.c b/fs_mgr/fs_mgr_main.c
index 33a7496..4bfe202 100644
--- a/fs_mgr/fs_mgr_main.c
+++ b/fs_mgr/fs_mgr_main.c
@@ -14,12 +14,17 @@
* limitations under the License.
*/
+#define _GNU_SOURCE
+
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
-#include <libgen.h>
#include "fs_mgr_priv.h"
+#ifdef _LIBGEN_H
+#warning "libgen.h must not be included"
+#endif
+
char *me = "";
static void usage(void)
@@ -32,10 +37,10 @@
* and exit the program, do not return to the caller.
* Return the number of argv[] entries consumed.
*/
-static void parse_options(int argc, char *argv[], int *a_flag, int *u_flag, int *n_flag,
- char **n_name, char **n_blk_dev)
+static void parse_options(int argc, char * const argv[], int *a_flag, int *u_flag, int *n_flag,
+ const char **n_name, const char **n_blk_dev)
{
- me = basename(strdup(argv[0]));
+ me = basename(argv[0]);
if (argc <= 1) {
usage();
@@ -75,14 +80,14 @@
return;
}
-int main(int argc, char *argv[])
+int main(int argc, char * const argv[])
{
int a_flag=0;
int u_flag=0;
int n_flag=0;
- char *n_name=NULL;
- char *n_blk_dev=NULL;
- char *fstab_file=NULL;
+ const char *n_name=NULL;
+ const char *n_blk_dev=NULL;
+ const char *fstab_file=NULL;
struct fstab *fstab=NULL;
klog_set_level(6);
@@ -97,7 +102,7 @@
if (a_flag) {
return fs_mgr_mount_all(fstab, MOUNT_MODE_DEFAULT);
} else if (n_flag) {
- return fs_mgr_do_mount(fstab, n_name, n_blk_dev, 0);
+ return fs_mgr_do_mount(fstab, n_name, (char *)n_blk_dev, 0);
} else if (u_flag) {
return fs_mgr_unmount_all(fstab);
} else {
diff --git a/fs_mgr/include/fs_mgr.h b/fs_mgr/include/fs_mgr.h
index b43847c..38c931e 100644
--- a/fs_mgr/include/fs_mgr.h
+++ b/fs_mgr/include/fs_mgr.h
@@ -97,7 +97,7 @@
#define FS_MGR_DOMNT_FAILED (-1)
#define FS_MGR_DOMNT_BUSY (-2)
-int fs_mgr_do_mount(struct fstab *fstab, char *n_name, char *n_blk_device,
+int fs_mgr_do_mount(struct fstab *fstab, const char *n_name, char *n_blk_device,
char *tmp_mount_point);
int fs_mgr_do_tmpfs_mount(char *n_name);
int fs_mgr_unmount_all(struct fstab *fstab);
diff --git a/healthd/Android.mk b/healthd/Android.mk
index b292725..1a96e88 100644
--- a/healthd/Android.mk
+++ b/healthd/Android.mk
@@ -3,16 +3,6 @@
LOCAL_PATH := $(call my-dir)
include $(CLEAR_VARS)
-LOCAL_SRC_FILES := healthd_board_default.cpp
-LOCAL_MODULE := libhealthd.default
-LOCAL_CFLAGS := -Werror
-LOCAL_C_INCLUDES := $(LOCAL_PATH)/include
-LOCAL_EXPORT_C_INCLUDE_DIRS := $(LOCAL_PATH)/include
-LOCAL_STATIC_LIBRARIES := libbinder
-LOCAL_EXPORT_STATIC_LIBRARY_HEADERS := libbinder
-include $(BUILD_STATIC_LIBRARY)
-
-include $(CLEAR_VARS)
LOCAL_SRC_FILES := BatteryMonitor.cpp
LOCAL_MODULE := libbatterymonitor
LOCAL_C_INCLUDES := $(LOCAL_PATH)/include
@@ -21,26 +11,47 @@
include $(BUILD_STATIC_LIBRARY)
include $(CLEAR_VARS)
-ifeq ($(strip $(BOARD_CHARGER_ENABLE_SUSPEND)),true)
-LOCAL_CFLAGS += -DCHARGER_ENABLE_SUSPEND
-LOCAL_SHARED_LIBRARIES += libsuspend
-endif
LOCAL_SRC_FILES := \
healthd_mode_android.cpp \
- healthd_mode_charger.cpp \
- AnimationParser.cpp \
- BatteryPropertiesRegistrar.cpp \
+ BatteryPropertiesRegistrar.cpp
-LOCAL_MODULE := libhealthd_internal
-LOCAL_C_INCLUDES := bootable/recovery
+LOCAL_MODULE := libhealthd_android
LOCAL_EXPORT_C_INCLUDE_DIRS := \
$(LOCAL_PATH) \
- $(LOCAL_PATH)/include \
+ $(LOCAL_PATH)/include
LOCAL_STATIC_LIBRARIES := \
libbatterymonitor \
libbatteryservice \
- libbinder \
+ libutils \
+ libbase \
+ libcutils \
+ liblog \
+ libc \
+
+include $(BUILD_STATIC_LIBRARY)
+
+include $(CLEAR_VARS)
+
+LOCAL_CFLAGS := -Werror
+ifeq ($(strip $(BOARD_CHARGER_DISABLE_INIT_BLANK)),true)
+LOCAL_CFLAGS += -DCHARGER_DISABLE_INIT_BLANK
+endif
+ifeq ($(strip $(BOARD_CHARGER_ENABLE_SUSPEND)),true)
+LOCAL_CFLAGS += -DCHARGER_ENABLE_SUSPEND
+endif
+
+LOCAL_SRC_FILES := \
+ healthd_mode_charger.cpp \
+ AnimationParser.cpp
+
+LOCAL_MODULE := libhealthd_charger
+LOCAL_C_INCLUDES := bootable/recovery $(LOCAL_PATH)/include
+LOCAL_EXPORT_C_INCLUDE_DIRS := \
+ $(LOCAL_PATH) \
+ $(LOCAL_PATH)/include
+
+LOCAL_STATIC_LIBRARIES := \
libminui \
libpng \
libz \
@@ -51,11 +62,14 @@
libm \
libc \
+ifeq ($(strip $(BOARD_CHARGER_ENABLE_SUSPEND)),true)
+LOCAL_STATIC_LIBRARIES += libsuspend
+endif
+
include $(BUILD_STATIC_LIBRARY)
-
+### charger ###
include $(CLEAR_VARS)
-
ifeq ($(strip $(BOARD_CHARGER_NO_UI)),true)
LOCAL_CHARGER_NO_UI := true
endif
@@ -64,80 +78,57 @@
endif
LOCAL_SRC_FILES := \
- healthd.cpp \
- healthd_mode_android.cpp \
- BatteryPropertiesRegistrar.cpp \
+ healthd_common.cpp \
+ charger.cpp \
-ifneq ($(strip $(LOCAL_CHARGER_NO_UI)),true)
-LOCAL_SRC_FILES += healthd_mode_charger.cpp
-endif
-
-LOCAL_MODULE := healthd
+LOCAL_MODULE := charger
LOCAL_MODULE_TAGS := optional
LOCAL_FORCE_STATIC_EXECUTABLE := true
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT_SBIN)
LOCAL_UNSTRIPPED_PATH := $(TARGET_ROOT_OUT_SBIN_UNSTRIPPED)
+LOCAL_C_INCLUDES := $(LOCAL_PATH)/include
-LOCAL_CFLAGS := -D__STDC_LIMIT_MACROS -Werror
-
-ifeq ($(strip $(BOARD_CHARGER_DISABLE_INIT_BLANK)),true)
-LOCAL_CFLAGS += -DCHARGER_DISABLE_INIT_BLANK
-endif
-
-ifeq ($(strip $(BOARD_CHARGER_ENABLE_SUSPEND)),true)
-LOCAL_CFLAGS += -DCHARGER_ENABLE_SUSPEND
-endif
-
+LOCAL_CFLAGS := -Werror
ifeq ($(strip $(LOCAL_CHARGER_NO_UI)),true)
LOCAL_CFLAGS += -DCHARGER_NO_UI
endif
-
-LOCAL_C_INCLUDES := bootable/recovery $(LOCAL_PATH)/include
-
ifneq ($(BOARD_PERIODIC_CHORES_INTERVAL_FAST),)
LOCAL_CFLAGS += -DBOARD_PERIODIC_CHORES_INTERVAL_FAST=$(BOARD_PERIODIC_CHORES_INTERVAL_FAST)
endif
-
ifneq ($(BOARD_PERIODIC_CHORES_INTERVAL_SLOW),)
LOCAL_CFLAGS += -DBOARD_PERIODIC_CHORES_INTERVAL_SLOW=$(BOARD_PERIODIC_CHORES_INTERVAL_SLOW)
endif
LOCAL_STATIC_LIBRARIES := \
- libhealthd_internal \
+ libhealthd_charger \
libbatterymonitor \
- libbatteryservice \
- libbinder \
libbase \
-
-ifneq ($(strip $(LOCAL_CHARGER_NO_UI)),true)
-LOCAL_STATIC_LIBRARIES += \
- libminui \
- libpng \
- libz \
-
-endif
-
-
-LOCAL_STATIC_LIBRARIES += \
libutils \
libcutils \
liblog \
libm \
libc \
+ifneq ($(strip $(LOCAL_CHARGER_NO_UI)),true)
+LOCAL_STATIC_LIBRARIES += \
+ libminui \
+ libpng \
+ libz \
+
+endif
+
ifeq ($(strip $(BOARD_CHARGER_ENABLE_SUSPEND)),true)
LOCAL_STATIC_LIBRARIES += libsuspend
endif
LOCAL_HAL_STATIC_LIBRARIES := libhealthd
-# Symlink /charger to /sbin/healthd
+# Symlink /charger to /sbin/charger
LOCAL_POST_INSTALL_CMD := $(hide) mkdir -p $(TARGET_ROOT_OUT) \
- && ln -sf /sbin/healthd $(TARGET_ROOT_OUT)/charger
+ && ln -sf /sbin/charger $(TARGET_ROOT_OUT)/charger
include $(BUILD_EXECUTABLE)
-
ifneq ($(strip $(LOCAL_CHARGER_NO_UI)),true)
define _add-charger-image
include $$(CLEAR_VARS)
@@ -165,3 +156,40 @@
_add-charger-image :=
_img_modules :=
endif # LOCAL_CHARGER_NO_UI
+
+### healthd ###
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := \
+ healthd_common.cpp \
+ healthd.cpp \
+
+LOCAL_MODULE := healthd
+LOCAL_MODULE_TAGS := optional
+LOCAL_C_INCLUDES := $(LOCAL_PATH)/include
+
+ifneq ($(BOARD_PERIODIC_CHORES_INTERVAL_FAST),)
+LOCAL_CFLAGS += -DBOARD_PERIODIC_CHORES_INTERVAL_FAST=$(BOARD_PERIODIC_CHORES_INTERVAL_FAST)
+endif
+ifneq ($(BOARD_PERIODIC_CHORES_INTERVAL_SLOW),)
+LOCAL_CFLAGS += -DBOARD_PERIODIC_CHORES_INTERVAL_SLOW=$(BOARD_PERIODIC_CHORES_INTERVAL_SLOW)
+endif
+
+LOCAL_STATIC_LIBRARIES := \
+ libhealthd_android \
+ libbatterymonitor \
+ libbatteryservice \
+ android.hardware.health@1.0-convert \
+
+LOCAL_SHARED_LIBRARIES := \
+ libbinder \
+ libbase \
+ libutils \
+ libcutils \
+ liblog \
+ libm \
+ libc \
+ libhidl \
+ android.hardware.health@1.0 \
+
+include $(BUILD_EXECUTABLE)
diff --git a/healthd/charger.cpp b/healthd/charger.cpp
new file mode 100644
index 0000000..5a8fe1a
--- /dev/null
+++ b/healthd/charger.cpp
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "charger"
+#define KLOG_LEVEL 6
+
+#include <healthd/healthd.h>
+
+#include <stdlib.h>
+#include <string.h>
+#include <cutils/klog.h>
+
+using namespace android;
+
+// main healthd loop
+extern int healthd_main(void);
+
+// Charger mode
+
+extern void healthd_mode_charger_init(struct healthd_config *config);
+extern int healthd_mode_charger_preparetowait(void);
+extern void healthd_mode_charger_heartbeat(void);
+extern void healthd_mode_charger_battery_update(
+ struct android::BatteryProperties *props);
+
+// NOPs for modes that need no special action
+
+static void healthd_mode_nop_init(struct healthd_config *config);
+static int healthd_mode_nop_preparetowait(void);
+static void healthd_mode_nop_heartbeat(void);
+static void healthd_mode_nop_battery_update(
+ struct android::BatteryProperties *props);
+
+static struct healthd_mode_ops healthd_nops = {
+ .init = healthd_mode_nop_init,
+ .preparetowait = healthd_mode_nop_preparetowait,
+ .heartbeat = healthd_mode_nop_heartbeat,
+ .battery_update = healthd_mode_nop_battery_update,
+};
+
+#ifdef CHARGER_NO_UI
+static struct healthd_mode_ops charger_ops = healthd_nops;
+#else
+static struct healthd_mode_ops charger_ops = {
+ .init = healthd_mode_charger_init,
+ .preparetowait = healthd_mode_charger_preparetowait,
+ .heartbeat = healthd_mode_charger_heartbeat,
+ .battery_update = healthd_mode_charger_battery_update,
+};
+#endif
+
+static void healthd_mode_nop_init(struct healthd_config* /*config*/) {
+}
+
+static int healthd_mode_nop_preparetowait(void) {
+ return -1;
+}
+
+static void healthd_mode_nop_heartbeat(void) {
+}
+
+static void healthd_mode_nop_battery_update(
+ struct android::BatteryProperties* /*props*/) {
+}
+
+int main(int argc, char **argv) {
+ int ch;
+
+ healthd_mode_ops = &charger_ops;
+
+ while ((ch = getopt(argc, argv, "cr")) != -1) {
+ switch (ch) {
+ case 'c':
+ // -c is now a noop
+ break;
+ case 'r':
+ // force nops for recovery
+ healthd_mode_ops = &healthd_nops;
+ break;
+ case '?':
+ default:
+ KLOG_ERROR(LOG_TAG, "Unrecognized charger option: %c\n",
+ optopt);
+ exit(1);
+ }
+ }
+
+ return healthd_main();
+}
diff --git a/healthd/healthd.cpp b/healthd/healthd.cpp
index aa6735d..cae6c4c 100644
--- a/healthd/healthd.cpp
+++ b/healthd/healthd.cpp
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2013 The Android Open Source Project
+ * Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
@@ -18,369 +18,106 @@
#define KLOG_LEVEL 6
#include <healthd/healthd.h>
-#include <healthd/BatteryMonitor.h>
-#include <errno.h>
-#include <libgen.h>
#include <stdio.h>
#include <stdlib.h>
-#include <string.h>
#include <unistd.h>
-#include <batteryservice/BatteryService.h>
#include <cutils/klog.h>
-#include <cutils/uevent.h>
-#include <sys/epoll.h>
-#include <sys/timerfd.h>
-#include <utils/Errors.h>
+
+#include <android/hardware/health/1.0/IHealth.h>
+#include <android/hardware/health/1.0/types.h>
+#include <hal_conversion.h>
using namespace android;
-#ifndef BOARD_PERIODIC_CHORES_INTERVAL_FAST
- // Periodic chores fast interval in seconds
- #define DEFAULT_PERIODIC_CHORES_INTERVAL_FAST (60 * 1)
-#else
- #define DEFAULT_PERIODIC_CHORES_INTERVAL_FAST (BOARD_PERIODIC_CHORES_INTERVAL_FAST)
-#endif
+using IHealth = ::android::hardware::health::V1_0::IHealth;
+using Result = ::android::hardware::health::V1_0::Result;
+using HealthConfig = ::android::hardware::health::V1_0::HealthConfig;
+using HealthInfo = ::android::hardware::health::V1_0::HealthInfo;
-#ifndef BOARD_PERIODIC_CHORES_INTERVAL_SLOW
- // Periodic chores fast interval in seconds
- #define DEFAULT_PERIODIC_CHORES_INTERVAL_SLOW (60 * 10)
-#else
- #define DEFAULT_PERIODIC_CHORES_INTERVAL_SLOW (BOARD_PERIODIC_CHORES_INTERVAL_SLOW)
-#endif
+using ::android::hardware::health::V1_0::hal_conversion::convertToHealthConfig;
+using ::android::hardware::health::V1_0::hal_conversion::convertFromHealthConfig;
+using ::android::hardware::health::V1_0::hal_conversion::convertToHealthInfo;
+using ::android::hardware::health::V1_0::hal_conversion::convertFromHealthInfo;
-static struct healthd_config healthd_config = {
- .periodic_chores_interval_fast = DEFAULT_PERIODIC_CHORES_INTERVAL_FAST,
- .periodic_chores_interval_slow = DEFAULT_PERIODIC_CHORES_INTERVAL_SLOW,
- .batteryStatusPath = String8(String8::kEmptyString),
- .batteryHealthPath = String8(String8::kEmptyString),
- .batteryPresentPath = String8(String8::kEmptyString),
- .batteryCapacityPath = String8(String8::kEmptyString),
- .batteryVoltagePath = String8(String8::kEmptyString),
- .batteryTemperaturePath = String8(String8::kEmptyString),
- .batteryTechnologyPath = String8(String8::kEmptyString),
- .batteryCurrentNowPath = String8(String8::kEmptyString),
- .batteryCurrentAvgPath = String8(String8::kEmptyString),
- .batteryChargeCounterPath = String8(String8::kEmptyString),
- .batteryFullChargePath = String8(String8::kEmptyString),
- .batteryCycleCountPath = String8(String8::kEmptyString),
- .energyCounter = NULL,
- .boot_min_cap = 0,
- .screen_on = NULL,
-};
+// device specific hal interface;
+static sp<IHealth> gHealth;
-static int eventct;
-static int epollfd;
-
-#define POWER_SUPPLY_SUBSYSTEM "power_supply"
-
-// epoll_create() parameter is actually unused
-#define MAX_EPOLL_EVENTS 40
-static int uevent_fd;
-static int wakealarm_fd;
-
-// -1 for no epoll timeout
-static int awake_poll_interval = -1;
-
-static int wakealarm_wake_interval = DEFAULT_PERIODIC_CHORES_INTERVAL_FAST;
-
-static BatteryMonitor* gBatteryMonitor;
-
-struct healthd_mode_ops *healthd_mode_ops;
+// main healthd loop
+extern int healthd_main(void);
// Android mode
-
extern void healthd_mode_android_init(struct healthd_config *config);
extern int healthd_mode_android_preparetowait(void);
+extern void healthd_mode_android_heartbeat(void);
extern void healthd_mode_android_battery_update(
struct android::BatteryProperties *props);
-// Charger mode
-
-extern void healthd_mode_charger_init(struct healthd_config *config);
-extern int healthd_mode_charger_preparetowait(void);
-extern void healthd_mode_charger_heartbeat(void);
-extern void healthd_mode_charger_battery_update(
- struct android::BatteryProperties *props);
-
-// NOPs for modes that need no special action
-
-static void healthd_mode_nop_init(struct healthd_config *config);
-static int healthd_mode_nop_preparetowait(void);
-static void healthd_mode_nop_heartbeat(void);
-static void healthd_mode_nop_battery_update(
- struct android::BatteryProperties *props);
-
static struct healthd_mode_ops android_ops = {
.init = healthd_mode_android_init,
.preparetowait = healthd_mode_android_preparetowait,
- .heartbeat = healthd_mode_nop_heartbeat,
+ .heartbeat = healthd_mode_android_heartbeat,
.battery_update = healthd_mode_android_battery_update,
};
-static struct healthd_mode_ops charger_ops = {
-#ifdef CHARGER_NO_UI
- .init = healthd_mode_nop_init,
- .preparetowait = healthd_mode_nop_preparetowait,
- .heartbeat = healthd_mode_nop_heartbeat,
- .battery_update = healthd_mode_nop_battery_update,
-#else
- .init = healthd_mode_charger_init,
- .preparetowait = healthd_mode_charger_preparetowait,
- .heartbeat = healthd_mode_charger_heartbeat,
- .battery_update = healthd_mode_charger_battery_update,
-#endif
-};
+// default energy counter property redirect to talk to device
+// HAL
+static int healthd_board_get_energy_counter(int64_t *energy) {
-static struct healthd_mode_ops recovery_ops = {
- .init = healthd_mode_nop_init,
- .preparetowait = healthd_mode_nop_preparetowait,
- .heartbeat = healthd_mode_nop_heartbeat,
- .battery_update = healthd_mode_nop_battery_update,
-};
-
-static void healthd_mode_nop_init(struct healthd_config* /*config*/) {
-}
-
-static int healthd_mode_nop_preparetowait(void) {
- return -1;
-}
-
-static void healthd_mode_nop_heartbeat(void) {
-}
-
-static void healthd_mode_nop_battery_update(
- struct android::BatteryProperties* /*props*/) {
-}
-
-int healthd_register_event(int fd, void (*handler)(uint32_t), EventWakeup wakeup) {
- struct epoll_event ev;
-
- ev.events = EPOLLIN;
-
- if (wakeup == EVENT_WAKEUP_FD)
- ev.events |= EPOLLWAKEUP;
-
- ev.data.ptr = (void *)handler;
- if (epoll_ctl(epollfd, EPOLL_CTL_ADD, fd, &ev) == -1) {
- KLOG_ERROR(LOG_TAG,
- "epoll_ctl failed; errno=%d\n", errno);
- return -1;
+ if (gHealth == nullptr) {
+ return NAME_NOT_FOUND;
}
- eventct++;
- return 0;
+ Result result = Result::NOT_SUPPORTED;
+ gHealth->energyCounter([=, &result] (Result ret, int64_t energyOut) {
+ result = ret;
+ *energy = energyOut;
+ });
+
+ return result == Result::SUCCESS ? OK : NAME_NOT_FOUND;
}
-static void wakealarm_set_interval(int interval) {
- struct itimerspec itval;
+void healthd_board_init(struct healthd_config *config) {
- if (wakealarm_fd == -1)
- return;
+ // Initialize the board HAL - Equivalent of healthd_board_init(config)
+ // in charger/recovery mode.
- wakealarm_wake_interval = interval;
-
- if (interval == -1)
- interval = 0;
-
- itval.it_interval.tv_sec = interval;
- itval.it_interval.tv_nsec = 0;
- itval.it_value.tv_sec = interval;
- itval.it_value.tv_nsec = 0;
-
- if (timerfd_settime(wakealarm_fd, 0, &itval, NULL) == -1)
- KLOG_ERROR(LOG_TAG, "wakealarm_set_interval: timerfd_settime failed\n");
-}
-
-status_t healthd_get_property(int id, struct BatteryProperty *val) {
- return gBatteryMonitor->getProperty(id, val);
-}
-
-void healthd_battery_update(void) {
- // Fast wake interval when on charger (watch for overheat);
- // slow wake interval when on battery (watch for drained battery).
-
- int new_wake_interval = gBatteryMonitor->update() ?
- healthd_config.periodic_chores_interval_fast :
- healthd_config.periodic_chores_interval_slow;
-
- if (new_wake_interval != wakealarm_wake_interval)
- wakealarm_set_interval(new_wake_interval);
-
- // During awake periods poll at fast rate. If wake alarm is set at fast
- // rate then just use the alarm; if wake alarm is set at slow rate then
- // poll at fast rate while awake and let alarm wake up at slow rate when
- // asleep.
-
- if (healthd_config.periodic_chores_interval_fast == -1)
- awake_poll_interval = -1;
- else
- awake_poll_interval =
- new_wake_interval == healthd_config.periodic_chores_interval_fast ?
- -1 : healthd_config.periodic_chores_interval_fast * 1000;
-}
-
-void healthd_dump_battery_state(int fd) {
- gBatteryMonitor->dumpState(fd);
- fsync(fd);
-}
-
-static void periodic_chores() {
- healthd_battery_update();
-}
-
-#define UEVENT_MSG_LEN 2048
-static void uevent_event(uint32_t /*epevents*/) {
- char msg[UEVENT_MSG_LEN+2];
- char *cp;
- int n;
-
- n = uevent_kernel_multicast_recv(uevent_fd, msg, UEVENT_MSG_LEN);
- if (n <= 0)
- return;
- if (n >= UEVENT_MSG_LEN) /* overflow -- discard */
- return;
-
- msg[n] = '\0';
- msg[n+1] = '\0';
- cp = msg;
-
- while (*cp) {
- if (!strcmp(cp, "SUBSYSTEM=" POWER_SUPPLY_SUBSYSTEM)) {
- healthd_battery_update();
- break;
- }
-
- /* advance to after the next \0 */
- while (*cp++)
- ;
- }
-}
-
-static void uevent_init(void) {
- uevent_fd = uevent_open_socket(64*1024, true);
-
- if (uevent_fd < 0) {
- KLOG_ERROR(LOG_TAG, "uevent_init: uevent_open_socket failed\n");
+ gHealth = IHealth::getService("health");
+ if (gHealth == nullptr) {
+ KLOG_WARNING(LOG_TAG, "unable to get HAL interface, using defaults\n");
return;
}
- fcntl(uevent_fd, F_SETFL, O_NONBLOCK);
- if (healthd_register_event(uevent_fd, uevent_event, EVENT_WAKEUP_FD))
- KLOG_ERROR(LOG_TAG,
- "register for uevent events failed\n");
+ HealthConfig halConfig;
+ convertToHealthConfig(config, halConfig);
+ gHealth->init(halConfig, [=] (const auto &halConfigOut) {
+ convertFromHealthConfig(halConfigOut, config);
+ // always redirect energy counter queries
+ config->energyCounter = healthd_board_get_energy_counter;
+ });
}
-static void wakealarm_event(uint32_t /*epevents*/) {
- unsigned long long wakeups;
+int healthd_board_battery_update(struct android::BatteryProperties *props) {
+ int logthis = 0;
- if (read(wakealarm_fd, &wakeups, sizeof(wakeups)) == -1) {
- KLOG_ERROR(LOG_TAG, "wakealarm_event: read wakealarm fd failed\n");
- return;
+ if (gHealth == nullptr) {
+ return logthis;
}
- periodic_chores();
+ HealthInfo info;
+ convertToHealthInfo(props, info);
+ gHealth->update(info,
+ [=, &logthis] (int32_t ret, const auto &infoOut) {
+ logthis = ret;
+ convertFromHealthInfo(infoOut, props);
+ });
+
+ return logthis;
}
-static void wakealarm_init(void) {
- wakealarm_fd = timerfd_create(CLOCK_BOOTTIME_ALARM, TFD_NONBLOCK);
- if (wakealarm_fd == -1) {
- KLOG_ERROR(LOG_TAG, "wakealarm_init: timerfd_create failed\n");
- return;
- }
+int main(int /*argc*/, char ** /*argv*/) {
- if (healthd_register_event(wakealarm_fd, wakealarm_event, EVENT_WAKEUP_FD))
- KLOG_ERROR(LOG_TAG,
- "Registration of wakealarm event failed\n");
-
- wakealarm_set_interval(healthd_config.periodic_chores_interval_fast);
-}
-
-static void healthd_mainloop(void) {
- int nevents = 0;
- while (1) {
- struct epoll_event events[eventct];
- int timeout = awake_poll_interval;
- int mode_timeout;
-
- /* Don't wait for first timer timeout to run periodic chores */
- if (!nevents)
- periodic_chores();
-
- healthd_mode_ops->heartbeat();
-
- mode_timeout = healthd_mode_ops->preparetowait();
- if (timeout < 0 || (mode_timeout > 0 && mode_timeout < timeout))
- timeout = mode_timeout;
- nevents = epoll_wait(epollfd, events, eventct, timeout);
- if (nevents == -1) {
- if (errno == EINTR)
- continue;
- KLOG_ERROR(LOG_TAG, "healthd_mainloop: epoll_wait failed\n");
- break;
- }
-
- for (int n = 0; n < nevents; ++n) {
- if (events[n].data.ptr)
- (*(void (*)(int))events[n].data.ptr)(events[n].events);
- }
- }
-
- return;
-}
-
-static int healthd_init() {
- epollfd = epoll_create(MAX_EPOLL_EVENTS);
- if (epollfd == -1) {
- KLOG_ERROR(LOG_TAG,
- "epoll_create failed; errno=%d\n",
- errno);
- return -1;
- }
-
- healthd_board_init(&healthd_config);
- healthd_mode_ops->init(&healthd_config);
- wakealarm_init();
- uevent_init();
- gBatteryMonitor = new BatteryMonitor();
- gBatteryMonitor->init(&healthd_config);
- return 0;
-}
-
-int main(int argc, char **argv) {
- int ch;
- int ret;
-
- klog_set_level(KLOG_LEVEL);
healthd_mode_ops = &android_ops;
- if (!strcmp(basename(argv[0]), "charger")) {
- healthd_mode_ops = &charger_ops;
- } else {
- while ((ch = getopt(argc, argv, "cr")) != -1) {
- switch (ch) {
- case 'c':
- healthd_mode_ops = &charger_ops;
- break;
- case 'r':
- healthd_mode_ops = &recovery_ops;
- break;
- case '?':
- default:
- KLOG_ERROR(LOG_TAG, "Unrecognized healthd option: %c\n",
- optopt);
- exit(1);
- }
- }
- }
-
- ret = healthd_init();
- if (ret) {
- KLOG_ERROR("Initialization failed, exiting\n");
- exit(2);
- }
-
- healthd_mainloop();
- KLOG_ERROR("Main loop terminated, exiting\n");
- return 3;
+ return healthd_main();
}
diff --git a/healthd/healthd_board_default.cpp b/healthd/healthd_board_default.cpp
deleted file mode 100644
index eb55773..0000000
--- a/healthd/healthd_board_default.cpp
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2013 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <healthd/healthd.h>
-
-void healthd_board_init(struct healthd_config*)
-{
- // use defaults
-}
-
-
-int healthd_board_battery_update(struct android::BatteryProperties*)
-{
- // return 0 to log periodic polled battery status to kernel log
- return 0;
-}
diff --git a/healthd/healthd_common.cpp b/healthd/healthd_common.cpp
new file mode 100644
index 0000000..6599919
--- /dev/null
+++ b/healthd/healthd_common.cpp
@@ -0,0 +1,304 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "healthd-common"
+#define KLOG_LEVEL 6
+
+#include <healthd/healthd.h>
+#include <healthd/BatteryMonitor.h>
+
+#include <errno.h>
+#include <libgen.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <batteryservice/BatteryService.h>
+#include <cutils/klog.h>
+#include <cutils/uevent.h>
+#include <sys/epoll.h>
+#include <sys/timerfd.h>
+#include <utils/Errors.h>
+
+using namespace android;
+
+#ifndef BOARD_PERIODIC_CHORES_INTERVAL_FAST
+ // Periodic chores fast interval in seconds
+ #define DEFAULT_PERIODIC_CHORES_INTERVAL_FAST (60 * 1)
+#else
+ #define DEFAULT_PERIODIC_CHORES_INTERVAL_FAST (BOARD_PERIODIC_CHORES_INTERVAL_FAST)
+#endif
+
+#ifndef BOARD_PERIODIC_CHORES_INTERVAL_SLOW
+ // Periodic chores fast interval in seconds
+ #define DEFAULT_PERIODIC_CHORES_INTERVAL_SLOW (60 * 10)
+#else
+ #define DEFAULT_PERIODIC_CHORES_INTERVAL_SLOW (BOARD_PERIODIC_CHORES_INTERVAL_SLOW)
+#endif
+
+static struct healthd_config healthd_config = {
+ .periodic_chores_interval_fast = DEFAULT_PERIODIC_CHORES_INTERVAL_FAST,
+ .periodic_chores_interval_slow = DEFAULT_PERIODIC_CHORES_INTERVAL_SLOW,
+ .batteryStatusPath = String8(String8::kEmptyString),
+ .batteryHealthPath = String8(String8::kEmptyString),
+ .batteryPresentPath = String8(String8::kEmptyString),
+ .batteryCapacityPath = String8(String8::kEmptyString),
+ .batteryVoltagePath = String8(String8::kEmptyString),
+ .batteryTemperaturePath = String8(String8::kEmptyString),
+ .batteryTechnologyPath = String8(String8::kEmptyString),
+ .batteryCurrentNowPath = String8(String8::kEmptyString),
+ .batteryCurrentAvgPath = String8(String8::kEmptyString),
+ .batteryChargeCounterPath = String8(String8::kEmptyString),
+ .batteryFullChargePath = String8(String8::kEmptyString),
+ .batteryCycleCountPath = String8(String8::kEmptyString),
+ .energyCounter = NULL,
+ .boot_min_cap = 0,
+ .screen_on = NULL,
+};
+
+static int eventct;
+static int epollfd;
+
+#define POWER_SUPPLY_SUBSYSTEM "power_supply"
+
+// epoll_create() parameter is actually unused
+#define MAX_EPOLL_EVENTS 40
+static int uevent_fd;
+static int wakealarm_fd;
+
+// -1 for no epoll timeout
+static int awake_poll_interval = -1;
+
+static int wakealarm_wake_interval = DEFAULT_PERIODIC_CHORES_INTERVAL_FAST;
+
+static BatteryMonitor* gBatteryMonitor;
+
+struct healthd_mode_ops *healthd_mode_ops;
+
+int healthd_register_event(int fd, void (*handler)(uint32_t), EventWakeup wakeup) {
+ struct epoll_event ev;
+
+ ev.events = EPOLLIN;
+
+ if (wakeup == EVENT_WAKEUP_FD)
+ ev.events |= EPOLLWAKEUP;
+
+ ev.data.ptr = (void *)handler;
+ if (epoll_ctl(epollfd, EPOLL_CTL_ADD, fd, &ev) == -1) {
+ KLOG_ERROR(LOG_TAG,
+ "epoll_ctl failed; errno=%d\n", errno);
+ return -1;
+ }
+
+ eventct++;
+ return 0;
+}
+
+static void wakealarm_set_interval(int interval) {
+ struct itimerspec itval;
+
+ if (wakealarm_fd == -1)
+ return;
+
+ wakealarm_wake_interval = interval;
+
+ if (interval == -1)
+ interval = 0;
+
+ itval.it_interval.tv_sec = interval;
+ itval.it_interval.tv_nsec = 0;
+ itval.it_value.tv_sec = interval;
+ itval.it_value.tv_nsec = 0;
+
+ if (timerfd_settime(wakealarm_fd, 0, &itval, NULL) == -1)
+ KLOG_ERROR(LOG_TAG, "wakealarm_set_interval: timerfd_settime failed\n");
+}
+
+status_t healthd_get_property(int id, struct BatteryProperty *val) {
+ return gBatteryMonitor->getProperty(id, val);
+}
+
+void healthd_battery_update(void) {
+ // Fast wake interval when on charger (watch for overheat);
+ // slow wake interval when on battery (watch for drained battery).
+
+ int new_wake_interval = gBatteryMonitor->update() ?
+ healthd_config.periodic_chores_interval_fast :
+ healthd_config.periodic_chores_interval_slow;
+
+ if (new_wake_interval != wakealarm_wake_interval)
+ wakealarm_set_interval(new_wake_interval);
+
+ // During awake periods poll at fast rate. If wake alarm is set at fast
+ // rate then just use the alarm; if wake alarm is set at slow rate then
+ // poll at fast rate while awake and let alarm wake up at slow rate when
+ // asleep.
+
+ if (healthd_config.periodic_chores_interval_fast == -1)
+ awake_poll_interval = -1;
+ else
+ awake_poll_interval =
+ new_wake_interval == healthd_config.periodic_chores_interval_fast ?
+ -1 : healthd_config.periodic_chores_interval_fast * 1000;
+}
+
+void healthd_dump_battery_state(int fd) {
+ gBatteryMonitor->dumpState(fd);
+ fsync(fd);
+}
+
+static void periodic_chores() {
+ healthd_battery_update();
+}
+
+#define UEVENT_MSG_LEN 2048
+static void uevent_event(uint32_t /*epevents*/) {
+ char msg[UEVENT_MSG_LEN+2];
+ char *cp;
+ int n;
+
+ n = uevent_kernel_multicast_recv(uevent_fd, msg, UEVENT_MSG_LEN);
+ if (n <= 0)
+ return;
+ if (n >= UEVENT_MSG_LEN) /* overflow -- discard */
+ return;
+
+ msg[n] = '\0';
+ msg[n+1] = '\0';
+ cp = msg;
+
+ while (*cp) {
+ if (!strcmp(cp, "SUBSYSTEM=" POWER_SUPPLY_SUBSYSTEM)) {
+ healthd_battery_update();
+ break;
+ }
+
+ /* advance to after the next \0 */
+ while (*cp++)
+ ;
+ }
+}
+
+static void uevent_init(void) {
+ uevent_fd = uevent_open_socket(64*1024, true);
+
+ if (uevent_fd < 0) {
+ KLOG_ERROR(LOG_TAG, "uevent_init: uevent_open_socket failed\n");
+ return;
+ }
+
+ fcntl(uevent_fd, F_SETFL, O_NONBLOCK);
+ if (healthd_register_event(uevent_fd, uevent_event, EVENT_WAKEUP_FD))
+ KLOG_ERROR(LOG_TAG,
+ "register for uevent events failed\n");
+}
+
+static void wakealarm_event(uint32_t /*epevents*/) {
+ unsigned long long wakeups;
+
+ if (read(wakealarm_fd, &wakeups, sizeof(wakeups)) == -1) {
+ KLOG_ERROR(LOG_TAG, "wakealarm_event: read wakealarm fd failed\n");
+ return;
+ }
+
+ periodic_chores();
+}
+
+static void wakealarm_init(void) {
+ wakealarm_fd = timerfd_create(CLOCK_BOOTTIME_ALARM, TFD_NONBLOCK);
+ if (wakealarm_fd == -1) {
+ KLOG_ERROR(LOG_TAG, "wakealarm_init: timerfd_create failed\n");
+ return;
+ }
+
+ if (healthd_register_event(wakealarm_fd, wakealarm_event, EVENT_WAKEUP_FD))
+ KLOG_ERROR(LOG_TAG,
+ "Registration of wakealarm event failed\n");
+
+ wakealarm_set_interval(healthd_config.periodic_chores_interval_fast);
+}
+
+static void healthd_mainloop(void) {
+ int nevents = 0;
+ while (1) {
+ struct epoll_event events[eventct];
+ int timeout = awake_poll_interval;
+ int mode_timeout;
+
+ /* Don't wait for first timer timeout to run periodic chores */
+ if (!nevents)
+ periodic_chores();
+
+ healthd_mode_ops->heartbeat();
+
+ mode_timeout = healthd_mode_ops->preparetowait();
+ if (timeout < 0 || (mode_timeout > 0 && mode_timeout < timeout))
+ timeout = mode_timeout;
+ nevents = epoll_wait(epollfd, events, eventct, timeout);
+ if (nevents == -1) {
+ if (errno == EINTR)
+ continue;
+ KLOG_ERROR(LOG_TAG, "healthd_mainloop: epoll_wait failed\n");
+ break;
+ }
+
+ for (int n = 0; n < nevents; ++n) {
+ if (events[n].data.ptr)
+ (*(void (*)(int))events[n].data.ptr)(events[n].events);
+ }
+ }
+
+ return;
+}
+
+static int healthd_init() {
+ epollfd = epoll_create(MAX_EPOLL_EVENTS);
+ if (epollfd == -1) {
+ KLOG_ERROR(LOG_TAG,
+ "epoll_create failed; errno=%d\n",
+ errno);
+ return -1;
+ }
+
+ healthd_board_init(&healthd_config);
+ healthd_mode_ops->init(&healthd_config);
+ wakealarm_init();
+ uevent_init();
+ gBatteryMonitor = new BatteryMonitor();
+ gBatteryMonitor->init(&healthd_config);
+ return 0;
+}
+
+int healthd_main() {
+ int ret;
+
+ klog_set_level(KLOG_LEVEL);
+
+ if (!healthd_mode_ops) {
+ KLOG_ERROR("healthd ops not set, exiting\n");
+ exit(1);
+ }
+
+ ret = healthd_init();
+ if (ret) {
+ KLOG_ERROR("Initialization failed, exiting\n");
+ exit(2);
+ }
+
+ healthd_mainloop();
+ KLOG_ERROR("Main loop terminated, exiting\n");
+ return 3;
+}
diff --git a/healthd/healthd_mode_android.cpp b/healthd/healthd_mode_android.cpp
index 323ef52..c612313 100644
--- a/healthd/healthd_mode_android.cpp
+++ b/healthd/healthd_mode_android.cpp
@@ -42,6 +42,9 @@
return -1;
}
+void healthd_mode_android_heartbeat(void) {
+}
+
static void binder_event(uint32_t /*epevents*/) {
IPCThreadState::self()->handlePolledCommands();
}
diff --git a/include/system/graphics-base.h b/include/system/graphics-base.h
new file mode 100644
index 0000000..cebd2f9
--- /dev/null
+++ b/include/system/graphics-base.h
@@ -0,0 +1,120 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+#ifndef HIDL_GENERATED_android_hardware_graphics_common_V1_0_EXPORTED_CONSTANTS_H_
+#define HIDL_GENERATED_android_hardware_graphics_common_V1_0_EXPORTED_CONSTANTS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ HAL_PIXEL_FORMAT_RGBA_8888 = 1,
+ HAL_PIXEL_FORMAT_RGBX_8888 = 2,
+ HAL_PIXEL_FORMAT_RGB_888 = 3,
+ HAL_PIXEL_FORMAT_RGB_565 = 4,
+ HAL_PIXEL_FORMAT_BGRA_8888 = 5,
+ HAL_PIXEL_FORMAT_YV12 = 842094169, // 0x32315659
+ HAL_PIXEL_FORMAT_Y8 = 538982489, // 0x20203859
+ HAL_PIXEL_FORMAT_Y16 = 540422489, // 0x20363159
+ HAL_PIXEL_FORMAT_RAW16 = 32, // 0x20
+ HAL_PIXEL_FORMAT_RAW10 = 37, // 0x25
+ HAL_PIXEL_FORMAT_RAW12 = 38, // 0x26
+ HAL_PIXEL_FORMAT_RAW_OPAQUE = 36, // 0x24
+ HAL_PIXEL_FORMAT_BLOB = 33, // 0x21
+ HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED = 34, // 0x22
+ HAL_PIXEL_FORMAT_YCBCR_420_888 = 35, // 0x23
+ HAL_PIXEL_FORMAT_YCBCR_422_888 = 39, // 0x27
+ HAL_PIXEL_FORMAT_YCBCR_444_888 = 40, // 0x28
+ HAL_PIXEL_FORMAT_FLEX_RGB_888 = 41, // 0x29
+ HAL_PIXEL_FORMAT_FLEX_RGBA_8888 = 42, // 0x2A
+ HAL_PIXEL_FORMAT_YCBCR_422_SP = 16, // 0x10
+ HAL_PIXEL_FORMAT_YCRCB_420_SP = 17, // 0x11
+ HAL_PIXEL_FORMAT_YCBCR_422_I = 20, // 0x14
+} android_pixel_format_t;
+
+typedef enum {
+ HAL_TRANSFORM_FLIP_H = 1, // 0x01
+ HAL_TRANSFORM_FLIP_V = 2, // 0x02
+ HAL_TRANSFORM_ROT_90 = 4, // 0x04
+ HAL_TRANSFORM_ROT_180 = 3, // 0x03
+ HAL_TRANSFORM_ROT_270 = 7, // 0x07
+} android_transform_t;
+
+typedef enum {
+ HAL_DATASPACE_UNKNOWN = 0, // 0x0
+ HAL_DATASPACE_ARBITRARY = 1, // 0x1
+ HAL_DATASPACE_STANDARD_SHIFT = 16,
+ HAL_DATASPACE_STANDARD_MASK = 4128768, // (63 << STANDARD_SHIFT)
+ HAL_DATASPACE_STANDARD_UNSPECIFIED = 0, // (0 << STANDARD_SHIFT)
+ HAL_DATASPACE_STANDARD_BT709 = 65536, // (1 << STANDARD_SHIFT)
+ HAL_DATASPACE_STANDARD_BT601_625 = 131072, // (2 << STANDARD_SHIFT)
+ HAL_DATASPACE_STANDARD_BT601_625_UNADJUSTED = 196608, // (3 << STANDARD_SHIFT)
+ HAL_DATASPACE_STANDARD_BT601_525 = 262144, // (4 << STANDARD_SHIFT)
+ HAL_DATASPACE_STANDARD_BT601_525_UNADJUSTED = 327680, // (5 << STANDARD_SHIFT)
+ HAL_DATASPACE_STANDARD_BT2020 = 393216, // (6 << STANDARD_SHIFT)
+ HAL_DATASPACE_STANDARD_BT2020_CONSTANT_LUMINANCE = 458752, // (7 << STANDARD_SHIFT)
+ HAL_DATASPACE_STANDARD_BT470M = 524288, // (8 << STANDARD_SHIFT)
+ HAL_DATASPACE_STANDARD_FILM = 589824, // (9 << STANDARD_SHIFT)
+ HAL_DATASPACE_TRANSFER_SHIFT = 22,
+ HAL_DATASPACE_TRANSFER_MASK = 130023424, // (31 << TRANSFER_SHIFT)
+ HAL_DATASPACE_TRANSFER_UNSPECIFIED = 0, // (0 << TRANSFER_SHIFT)
+ HAL_DATASPACE_TRANSFER_LINEAR = 4194304, // (1 << TRANSFER_SHIFT)
+ HAL_DATASPACE_TRANSFER_SRGB = 8388608, // (2 << TRANSFER_SHIFT)
+ HAL_DATASPACE_TRANSFER_SMPTE_170M = 12582912, // (3 << TRANSFER_SHIFT)
+ HAL_DATASPACE_TRANSFER_GAMMA2_2 = 16777216, // (4 << TRANSFER_SHIFT)
+ HAL_DATASPACE_TRANSFER_GAMMA2_8 = 20971520, // (5 << TRANSFER_SHIFT)
+ HAL_DATASPACE_TRANSFER_ST2084 = 25165824, // (6 << TRANSFER_SHIFT)
+ HAL_DATASPACE_TRANSFER_HLG = 29360128, // (7 << TRANSFER_SHIFT)
+ HAL_DATASPACE_RANGE_SHIFT = 27,
+ HAL_DATASPACE_RANGE_MASK = 939524096, // (7 << RANGE_SHIFT)
+ HAL_DATASPACE_RANGE_UNSPECIFIED = 0, // (0 << RANGE_SHIFT)
+ HAL_DATASPACE_RANGE_FULL = 134217728, // (1 << RANGE_SHIFT)
+ HAL_DATASPACE_RANGE_LIMITED = 268435456, // (2 << RANGE_SHIFT)
+ HAL_DATASPACE_SRGB_LINEAR = 512, // 0x200
+ HAL_DATASPACE_V0_SRGB_LINEAR = 138477568, // ((STANDARD_BT709 | TRANSFER_LINEAR) | RANGE_FULL)
+ HAL_DATASPACE_SRGB = 513, // 0x201
+ HAL_DATASPACE_V0_SRGB = 142671872, // ((STANDARD_BT709 | TRANSFER_SRGB) | RANGE_FULL)
+ HAL_DATASPACE_JFIF = 257, // 0x101
+ HAL_DATASPACE_V0_JFIF = 146931712, // ((STANDARD_BT601_625 | TRANSFER_SMPTE_170M) | RANGE_FULL)
+ HAL_DATASPACE_BT601_625 = 258, // 0x102
+ HAL_DATASPACE_V0_BT601_625 = 281149440, // ((STANDARD_BT601_625 | TRANSFER_SMPTE_170M) | RANGE_LIMITED)
+ HAL_DATASPACE_BT601_525 = 259, // 0x103
+ HAL_DATASPACE_V0_BT601_525 = 281280512, // ((STANDARD_BT601_525 | TRANSFER_SMPTE_170M) | RANGE_LIMITED)
+ HAL_DATASPACE_BT709 = 260, // 0x104
+ HAL_DATASPACE_V0_BT709 = 281083904, // ((STANDARD_BT709 | TRANSFER_SMPTE_170M) | RANGE_LIMITED)
+ HAL_DATASPACE_DEPTH = 4096, // 0x1000
+} android_dataspace_t;
+
+typedef enum {
+ HAL_COLOR_MODE_NATIVE = 0,
+ HAL_COLOR_MODE_STANDARD_BT601_625 = 1,
+ HAL_COLOR_MODE_STANDARD_BT601_625_UNADJUSTED = 2,
+ HAL_COLOR_MODE_STANDARD_BT601_525 = 3,
+ HAL_COLOR_MODE_STANDARD_BT601_525_UNADJUSTED = 4,
+ HAL_COLOR_MODE_STANDARD_BT709 = 5,
+ HAL_COLOR_MODE_DCI_P3 = 6,
+ HAL_COLOR_MODE_SRGB = 7,
+ HAL_COLOR_MODE_ADOBE_RGB = 8,
+} android_color_mode_t;
+
+typedef enum {
+ HAL_COLOR_TRANSFORM_IDENTITY = 0,
+ HAL_COLOR_TRANSFORM_ARBITRARY_MATRIX = 1,
+ HAL_COLOR_TRANSFORM_VALUE_INVERSE = 2,
+ HAL_COLOR_TRANSFORM_GRAYSCALE = 3,
+ HAL_COLOR_TRANSFORM_CORRECT_PROTANOPIA = 4,
+ HAL_COLOR_TRANSFORM_CORRECT_DEUTERANOPIA = 5,
+ HAL_COLOR_TRANSFORM_CORRECT_TRITANOPIA = 6,
+} android_color_transform_t;
+
+typedef enum {
+ HAL_HDR_DOLBY_VISION = 1,
+ HAL_HDR_HDR10 = 2,
+ HAL_HDR_HLG = 3,
+} android_hdr_t;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // HIDL_GENERATED_android_hardware_graphics_common_V1_0_EXPORTED_CONSTANTS_H_
diff --git a/include/system/graphics.h b/include/system/graphics.h
index ae10fa0..449b8c7 100644
--- a/include/system/graphics.h
+++ b/include/system/graphics.h
@@ -20,10 +20,30 @@
#include <stddef.h>
#include <stdint.h>
+/*
+ * Some of the enums are now defined in HIDL in hardware/interfaces and are
+ * generated.
+ */
+#include "graphics-base.h"
+
#ifdef __cplusplus
extern "C" {
#endif
+/* for compatibility */
+#define HAL_PIXEL_FORMAT_YCbCr_420_888 HAL_PIXEL_FORMAT_YCBCR_420_888
+#define HAL_PIXEL_FORMAT_YCbCr_422_888 HAL_PIXEL_FORMAT_YCBCR_422_888
+#define HAL_PIXEL_FORMAT_YCbCr_444_888 HAL_PIXEL_FORMAT_YCBCR_444_888
+#define HAL_PIXEL_FORMAT_YCbCr_422_SP HAL_PIXEL_FORMAT_YCBCR_422_SP
+#define HAL_PIXEL_FORMAT_YCrCb_420_SP HAL_PIXEL_FORMAT_YCRCB_420_SP
+#define HAL_PIXEL_FORMAT_YCbCr_422_I HAL_PIXEL_FORMAT_YCBCR_422_I
+typedef android_pixel_format_t android_pixel_format;
+typedef android_transform_t android_transform;
+typedef android_dataspace_t android_dataspace;
+typedef android_color_mode_t android_color_mode;
+typedef android_color_transform_t android_color_transform;
+typedef android_hdr_t android_hdr;
+
/*
* If the HAL needs to create service threads to handle graphics related
* tasks, these threads need to run at HAL_PRIORITY_URGENT_DISPLAY priority
@@ -38,411 +58,6 @@
#define HAL_PRIORITY_URGENT_DISPLAY (-8)
-/**
- * pixel format definitions
- */
-
-typedef enum android_pixel_format {
- /*
- * "linear" color pixel formats:
- *
- * When used with ANativeWindow, the dataSpace field describes the color
- * space of the buffer.
- *
- * The color space determines, for example, if the formats are linear or
- * gamma-corrected; or whether any special operations are performed when
- * reading or writing into a buffer in one of these formats.
- */
- HAL_PIXEL_FORMAT_RGBA_8888 = 1,
- HAL_PIXEL_FORMAT_RGBX_8888 = 2,
- HAL_PIXEL_FORMAT_RGB_888 = 3,
- HAL_PIXEL_FORMAT_RGB_565 = 4,
- HAL_PIXEL_FORMAT_BGRA_8888 = 5,
-
- /*
- * 0x100 - 0x1FF
- *
- * This range is reserved for pixel formats that are specific to the HAL
- * implementation. Implementations can use any value in this range to
- * communicate video pixel formats between their HAL modules. These formats
- * must not have an alpha channel. Additionally, an EGLimage created from a
- * gralloc buffer of one of these formats must be supported for use with the
- * GL_OES_EGL_image_external OpenGL ES extension.
- */
-
- /*
- * Android YUV format:
- *
- * This format is exposed outside of the HAL to software decoders and
- * applications. EGLImageKHR must support it in conjunction with the
- * OES_EGL_image_external extension.
- *
- * YV12 is a 4:2:0 YCrCb planar format comprised of a WxH Y plane followed
- * by (W/2) x (H/2) Cr and Cb planes.
- *
- * This format assumes
- * - an even width
- * - an even height
- * - a horizontal stride multiple of 16 pixels
- * - a vertical stride equal to the height
- *
- * y_size = stride * height
- * c_stride = ALIGN(stride/2, 16)
- * c_size = c_stride * height/2
- * size = y_size + c_size * 2
- * cr_offset = y_size
- * cb_offset = y_size + c_size
- *
- * When used with ANativeWindow, the dataSpace field describes the color
- * space of the buffer.
- */
- HAL_PIXEL_FORMAT_YV12 = 0x32315659, // YCrCb 4:2:0 Planar
-
-
- /*
- * Android Y8 format:
- *
- * This format is exposed outside of the HAL to the framework.
- * The expected gralloc usage flags are SW_* and HW_CAMERA_*,
- * and no other HW_ flags will be used.
- *
- * Y8 is a YUV planar format comprised of a WxH Y plane,
- * with each pixel being represented by 8 bits.
- *
- * It is equivalent to just the Y plane from YV12.
- *
- * This format assumes
- * - an even width
- * - an even height
- * - a horizontal stride multiple of 16 pixels
- * - a vertical stride equal to the height
- *
- * size = stride * height
- *
- * When used with ANativeWindow, the dataSpace field describes the color
- * space of the buffer.
- */
- HAL_PIXEL_FORMAT_Y8 = 0x20203859,
-
- /*
- * Android Y16 format:
- *
- * This format is exposed outside of the HAL to the framework.
- * The expected gralloc usage flags are SW_* and HW_CAMERA_*,
- * and no other HW_ flags will be used.
- *
- * Y16 is a YUV planar format comprised of a WxH Y plane,
- * with each pixel being represented by 16 bits.
- *
- * It is just like Y8, but has double the bits per pixel (little endian).
- *
- * This format assumes
- * - an even width
- * - an even height
- * - a horizontal stride multiple of 16 pixels
- * - a vertical stride equal to the height
- * - strides are specified in pixels, not in bytes
- *
- * size = stride * height * 2
- *
- * When used with ANativeWindow, the dataSpace field describes the color
- * space of the buffer, except that dataSpace field
- * HAL_DATASPACE_DEPTH indicates that this buffer contains a depth
- * image where each sample is a distance value measured by a depth camera,
- * plus an associated confidence value.
- */
- HAL_PIXEL_FORMAT_Y16 = 0x20363159,
-
- /*
- * Android RAW sensor format:
- *
- * This format is exposed outside of the camera HAL to applications.
- *
- * RAW16 is a single-channel, 16-bit, little endian format, typically
- * representing raw Bayer-pattern images from an image sensor, with minimal
- * processing.
- *
- * The exact pixel layout of the data in the buffer is sensor-dependent, and
- * needs to be queried from the camera device.
- *
- * Generally, not all 16 bits are used; more common values are 10 or 12
- * bits. If not all bits are used, the lower-order bits are filled first.
- * All parameters to interpret the raw data (black and white points,
- * color space, etc) must be queried from the camera device.
- *
- * This format assumes
- * - an even width
- * - an even height
- * - a horizontal stride multiple of 16 pixels
- * - a vertical stride equal to the height
- * - strides are specified in pixels, not in bytes
- *
- * size = stride * height * 2
- *
- * This format must be accepted by the gralloc module when used with the
- * following usage flags:
- * - GRALLOC_USAGE_HW_CAMERA_*
- * - GRALLOC_USAGE_SW_*
- * - GRALLOC_USAGE_RENDERSCRIPT
- *
- * When used with ANativeWindow, the dataSpace should be
- * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial
- * extra metadata to define.
- */
- HAL_PIXEL_FORMAT_RAW16 = 0x20,
-
- /*
- * Android RAW10 format:
- *
- * This format is exposed outside of the camera HAL to applications.
- *
- * RAW10 is a single-channel, 10-bit per pixel, densely packed in each row,
- * unprocessed format, usually representing raw Bayer-pattern images coming from
- * an image sensor.
- *
- * In an image buffer with this format, starting from the first pixel of each
- * row, each 4 consecutive pixels are packed into 5 bytes (40 bits). Each one
- * of the first 4 bytes contains the top 8 bits of each pixel, The fifth byte
- * contains the 2 least significant bits of the 4 pixels, the exact layout data
- * for each 4 consecutive pixels is illustrated below (Pi[j] stands for the jth
- * bit of the ith pixel):
- *
- * bit 7 bit 0
- * =====|=====|=====|=====|=====|=====|=====|=====|
- * Byte 0: |P0[9]|P0[8]|P0[7]|P0[6]|P0[5]|P0[4]|P0[3]|P0[2]|
- * |-----|-----|-----|-----|-----|-----|-----|-----|
- * Byte 1: |P1[9]|P1[8]|P1[7]|P1[6]|P1[5]|P1[4]|P1[3]|P1[2]|
- * |-----|-----|-----|-----|-----|-----|-----|-----|
- * Byte 2: |P2[9]|P2[8]|P2[7]|P2[6]|P2[5]|P2[4]|P2[3]|P2[2]|
- * |-----|-----|-----|-----|-----|-----|-----|-----|
- * Byte 3: |P3[9]|P3[8]|P3[7]|P3[6]|P3[5]|P3[4]|P3[3]|P3[2]|
- * |-----|-----|-----|-----|-----|-----|-----|-----|
- * Byte 4: |P3[1]|P3[0]|P2[1]|P2[0]|P1[1]|P1[0]|P0[1]|P0[0]|
- * ===============================================
- *
- * This format assumes
- * - a width multiple of 4 pixels
- * - an even height
- * - a vertical stride equal to the height
- * - strides are specified in bytes, not in pixels
- *
- * size = stride * height
- *
- * When stride is equal to width * (10 / 8), there will be no padding bytes at
- * the end of each row, the entire image data is densely packed. When stride is
- * larger than width * (10 / 8), padding bytes will be present at the end of each
- * row (including the last row).
- *
- * This format must be accepted by the gralloc module when used with the
- * following usage flags:
- * - GRALLOC_USAGE_HW_CAMERA_*
- * - GRALLOC_USAGE_SW_*
- * - GRALLOC_USAGE_RENDERSCRIPT
- *
- * When used with ANativeWindow, the dataSpace field should be
- * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial
- * extra metadata to define.
- */
- HAL_PIXEL_FORMAT_RAW10 = 0x25,
-
- /*
- * Android RAW12 format:
- *
- * This format is exposed outside of camera HAL to applications.
- *
- * RAW12 is a single-channel, 12-bit per pixel, densely packed in each row,
- * unprocessed format, usually representing raw Bayer-pattern images coming from
- * an image sensor.
- *
- * In an image buffer with this format, starting from the first pixel of each
- * row, each two consecutive pixels are packed into 3 bytes (24 bits). The first
- * and second byte contains the top 8 bits of first and second pixel. The third
- * byte contains the 4 least significant bits of the two pixels, the exact layout
- * data for each two consecutive pixels is illustrated below (Pi[j] stands for
- * the jth bit of the ith pixel):
- *
- * bit 7 bit 0
- * ======|======|======|======|======|======|======|======|
- * Byte 0: |P0[11]|P0[10]|P0[ 9]|P0[ 8]|P0[ 7]|P0[ 6]|P0[ 5]|P0[ 4]|
- * |------|------|------|------|------|------|------|------|
- * Byte 1: |P1[11]|P1[10]|P1[ 9]|P1[ 8]|P1[ 7]|P1[ 6]|P1[ 5]|P1[ 4]|
- * |------|------|------|------|------|------|------|------|
- * Byte 2: |P1[ 3]|P1[ 2]|P1[ 1]|P1[ 0]|P0[ 3]|P0[ 2]|P0[ 1]|P0[ 0]|
- * =======================================================
- *
- * This format assumes:
- * - a width multiple of 4 pixels
- * - an even height
- * - a vertical stride equal to the height
- * - strides are specified in bytes, not in pixels
- *
- * size = stride * height
- *
- * When stride is equal to width * (12 / 8), there will be no padding bytes at
- * the end of each row, the entire image data is densely packed. When stride is
- * larger than width * (12 / 8), padding bytes will be present at the end of
- * each row (including the last row).
- *
- * This format must be accepted by the gralloc module when used with the
- * following usage flags:
- * - GRALLOC_USAGE_HW_CAMERA_*
- * - GRALLOC_USAGE_SW_*
- * - GRALLOC_USAGE_RENDERSCRIPT
- *
- * When used with ANativeWindow, the dataSpace field should be
- * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial
- * extra metadata to define.
- */
- HAL_PIXEL_FORMAT_RAW12 = 0x26,
-
- /*
- * Android opaque RAW format:
- *
- * This format is exposed outside of the camera HAL to applications.
- *
- * RAW_OPAQUE is a format for unprocessed raw image buffers coming from an
- * image sensor. The actual structure of buffers of this format is
- * implementation-dependent.
- *
- * This format must be accepted by the gralloc module when used with the
- * following usage flags:
- * - GRALLOC_USAGE_HW_CAMERA_*
- * - GRALLOC_USAGE_SW_*
- * - GRALLOC_USAGE_RENDERSCRIPT
- *
- * When used with ANativeWindow, the dataSpace field should be
- * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial
- * extra metadata to define.
- */
- HAL_PIXEL_FORMAT_RAW_OPAQUE = 0x24,
-
- /*
- * Android binary blob graphics buffer format:
- *
- * This format is used to carry task-specific data which does not have a
- * standard image structure. The details of the format are left to the two
- * endpoints.
- *
- * A typical use case is for transporting JPEG-compressed images from the
- * Camera HAL to the framework or to applications.
- *
- * Buffers of this format must have a height of 1, and width equal to their
- * size in bytes.
- *
- * When used with ANativeWindow, the mapping of the dataSpace field to
- * buffer contents for BLOB is as follows:
- *
- * dataSpace value | Buffer contents
- * -------------------------------+-----------------------------------------
- * HAL_DATASPACE_JFIF | An encoded JPEG image
- * HAL_DATASPACE_DEPTH | An android_depth_points buffer
- * Other | Unsupported
- *
- */
- HAL_PIXEL_FORMAT_BLOB = 0x21,
-
- /*
- * Android format indicating that the choice of format is entirely up to the
- * device-specific Gralloc implementation.
- *
- * The Gralloc implementation should examine the usage bits passed in when
- * allocating a buffer with this format, and it should derive the pixel
- * format from those usage flags. This format will never be used with any
- * of the GRALLOC_USAGE_SW_* usage flags.
- *
- * If a buffer of this format is to be used as an OpenGL ES texture, the
- * framework will assume that sampling the texture will always return an
- * alpha value of 1.0 (i.e. the buffer contains only opaque pixel values).
- *
- * When used with ANativeWindow, the dataSpace field describes the color
- * space of the buffer.
- */
- HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED = 0x22,
-
- /*
- * Android flexible YCbCr 4:2:0 formats
- *
- * This format allows platforms to use an efficient YCbCr/YCrCb 4:2:0
- * buffer layout, while still describing the general format in a
- * layout-independent manner. While called YCbCr, it can be
- * used to describe formats with either chromatic ordering, as well as
- * whole planar or semiplanar layouts.
- *
- * struct android_ycbcr (below) is the the struct used to describe it.
- *
- * This format must be accepted by the gralloc module when
- * USAGE_SW_WRITE_* or USAGE_SW_READ_* are set.
- *
- * This format is locked for use by gralloc's (*lock_ycbcr) method, and
- * locking with the (*lock) method will return an error.
- *
- * When used with ANativeWindow, the dataSpace field describes the color
- * space of the buffer.
- */
- HAL_PIXEL_FORMAT_YCbCr_420_888 = 0x23,
-
- /*
- * Android flexible YCbCr 4:2:2 formats
- *
- * This format allows platforms to use an efficient YCbCr/YCrCb 4:2:2
- * buffer layout, while still describing the general format in a
- * layout-independent manner. While called YCbCr, it can be
- * used to describe formats with either chromatic ordering, as well as
- * whole planar or semiplanar layouts.
- *
- * This format is currently only used by SW readable buffers
- * produced by MediaCodecs, so the gralloc module can ignore this format.
- */
- HAL_PIXEL_FORMAT_YCbCr_422_888 = 0x27,
-
- /*
- * Android flexible YCbCr 4:4:4 formats
- *
- * This format allows platforms to use an efficient YCbCr/YCrCb 4:4:4
- * buffer layout, while still describing the general format in a
- * layout-independent manner. While called YCbCr, it can be
- * used to describe formats with either chromatic ordering, as well as
- * whole planar or semiplanar layouts.
- *
- * This format is currently only used by SW readable buffers
- * produced by MediaCodecs, so the gralloc module can ignore this format.
- */
- HAL_PIXEL_FORMAT_YCbCr_444_888 = 0x28,
-
- /*
- * Android flexible RGB 888 formats
- *
- * This format allows platforms to use an efficient RGB/BGR/RGBX/BGRX
- * buffer layout, while still describing the general format in a
- * layout-independent manner. While called RGB, it can be
- * used to describe formats with either color ordering and optional
- * padding, as well as whole planar layout.
- *
- * This format is currently only used by SW readable buffers
- * produced by MediaCodecs, so the gralloc module can ignore this format.
- */
- HAL_PIXEL_FORMAT_FLEX_RGB_888 = 0x29,
-
- /*
- * Android flexible RGBA 8888 formats
- *
- * This format allows platforms to use an efficient RGBA/BGRA/ARGB/ABGR
- * buffer layout, while still describing the general format in a
- * layout-independent manner. While called RGBA, it can be
- * used to describe formats with any of the component orderings, as
- * well as whole planar layout.
- *
- * This format is currently only used by SW readable buffers
- * produced by MediaCodecs, so the gralloc module can ignore this format.
- */
- HAL_PIXEL_FORMAT_FLEX_RGBA_8888 = 0x2A,
-
- /* Legacy formats (deprecated), used by ImageFormat.java */
- HAL_PIXEL_FORMAT_YCbCr_422_SP = 0x10, // NV16
- HAL_PIXEL_FORMAT_YCrCb_420_SP = 0x11, // NV21
- HAL_PIXEL_FORMAT_YCbCr_422_I = 0x14, // YUY2
-} android_pixel_format_t;
-
/*
* Structure for describing YCbCr formats for consumption by applications.
* This is used with HAL_PIXEL_FORMAT_YCbCr_*_888.
@@ -622,797 +237,6 @@
#endif
};
-/**
- * Transformation definitions
- *
- * IMPORTANT NOTE:
- * HAL_TRANSFORM_ROT_90 is applied CLOCKWISE and AFTER HAL_TRANSFORM_FLIP_{H|V}.
- *
- */
-
-typedef enum android_transform {
- /* flip source image horizontally (around the vertical axis) */
- HAL_TRANSFORM_FLIP_H = 0x01,
- /* flip source image vertically (around the horizontal axis)*/
- HAL_TRANSFORM_FLIP_V = 0x02,
- /* rotate source image 90 degrees clockwise */
- HAL_TRANSFORM_ROT_90 = 0x04,
- /* rotate source image 180 degrees */
- HAL_TRANSFORM_ROT_180 = 0x03,
- /* rotate source image 270 degrees clockwise */
- HAL_TRANSFORM_ROT_270 = 0x07,
- /* don't use. see system/window.h */
- HAL_TRANSFORM_RESERVED = 0x08,
-} android_transform_t;
-
-/**
- * Dataspace Definitions
- * ======================
- *
- * Dataspace is the definition of how pixel values should be interpreted.
- *
- * For many formats, this is the colorspace of the image data, which includes
- * primaries (including white point) and the transfer characteristic function,
- * which describes both gamma curve and numeric range (within the bit depth).
- *
- * Other dataspaces include depth measurement data from a depth camera.
- *
- * A dataspace is comprised of a number of fields.
- *
- * Version
- * --------
- * The top 2 bits represent the revision of the field specification. This is
- * currently always 0.
- *
- *
- * bits 31-30 29 - 0
- * +-----+----------------------------------------------------+
- * fields | Rev | Revision specific fields |
- * +-----+----------------------------------------------------+
- *
- * Field layout for version = 0:
- * ----------------------------
- *
- * A dataspace is comprised of the following fields:
- * Standard
- * Transfer function
- * Range
- *
- * bits 31-30 29-27 26 - 22 21 - 16 15 - 0
- * +-----+-----+--------+--------+----------------------------+
- * fields | 0 |Range|Transfer|Standard| Legacy and custom |
- * +-----+-----+--------+--------+----------------------------+
- * VV RRR TTTTT SSSSSS LLLLLLLL LLLLLLLL
- *
- * If range, transfer and standard fields are all 0 (e.g. top 16 bits are
- * all zeroes), the bottom 16 bits contain either a legacy dataspace value,
- * or a custom value.
- */
-
-typedef enum android_dataspace {
- /*
- * Default-assumption data space, when not explicitly specified.
- *
- * It is safest to assume the buffer is an image with sRGB primaries and
- * encoding ranges, but the consumer and/or the producer of the data may
- * simply be using defaults. No automatic gamma transform should be
- * expected, except for a possible display gamma transform when drawn to a
- * screen.
- */
- HAL_DATASPACE_UNKNOWN = 0x0,
-
- /*
- * Arbitrary dataspace with manually defined characteristics. Definition
- * for colorspaces or other meaning must be communicated separately.
- *
- * This is used when specifying primaries, transfer characteristics,
- * etc. separately.
- *
- * A typical use case is in video encoding parameters (e.g. for H.264),
- * where a colorspace can have separately defined primaries, transfer
- * characteristics, etc.
- */
- HAL_DATASPACE_ARBITRARY = 0x1,
-
- /*
- * Color-description aspects
- *
- * The following aspects define various characteristics of the color
- * specification. These represent bitfields, so that a data space value
- * can specify each of them independently.
- */
-
- HAL_DATASPACE_STANDARD_SHIFT = 16,
-
- /*
- * Standard aspect
- *
- * Defines the chromaticity coordinates of the source primaries in terms of
- * the CIE 1931 definition of x and y specified in ISO 11664-1.
- */
- HAL_DATASPACE_STANDARD_MASK = 63 << HAL_DATASPACE_STANDARD_SHIFT, // 0x3F
-
- /*
- * Chromacity coordinates are unknown or are determined by the application.
- * Implementations shall use the following suggested standards:
- *
- * All YCbCr formats: BT709 if size is 720p or larger (since most video
- * content is letterboxed this corresponds to width is
- * 1280 or greater, or height is 720 or greater).
- * BT601_625 if size is smaller than 720p or is JPEG.
- * All RGB formats: BT709.
- *
- * For all other formats standard is undefined, and implementations should use
- * an appropriate standard for the data represented.
- */
- HAL_DATASPACE_STANDARD_UNSPECIFIED = 0 << HAL_DATASPACE_STANDARD_SHIFT,
-
- /*
- * Primaries: x y
- * green 0.300 0.600
- * blue 0.150 0.060
- * red 0.640 0.330
- * white (D65) 0.3127 0.3290
- *
- * Use the unadjusted KR = 0.2126, KB = 0.0722 luminance interpretation
- * for RGB conversion.
- */
- HAL_DATASPACE_STANDARD_BT709 = 1 << HAL_DATASPACE_STANDARD_SHIFT,
-
- /*
- * Primaries: x y
- * green 0.290 0.600
- * blue 0.150 0.060
- * red 0.640 0.330
- * white (D65) 0.3127 0.3290
- *
- * KR = 0.299, KB = 0.114. This adjusts the luminance interpretation
- * for RGB conversion from the one purely determined by the primaries
- * to minimize the color shift into RGB space that uses BT.709
- * primaries.
- */
- HAL_DATASPACE_STANDARD_BT601_625 = 2 << HAL_DATASPACE_STANDARD_SHIFT,
-
- /*
- * Primaries: x y
- * green 0.290 0.600
- * blue 0.150 0.060
- * red 0.640 0.330
- * white (D65) 0.3127 0.3290
- *
- * Use the unadjusted KR = 0.222, KB = 0.071 luminance interpretation
- * for RGB conversion.
- */
- HAL_DATASPACE_STANDARD_BT601_625_UNADJUSTED = 3 << HAL_DATASPACE_STANDARD_SHIFT,
-
- /*
- * Primaries: x y
- * green 0.310 0.595
- * blue 0.155 0.070
- * red 0.630 0.340
- * white (D65) 0.3127 0.3290
- *
- * KR = 0.299, KB = 0.114. This adjusts the luminance interpretation
- * for RGB conversion from the one purely determined by the primaries
- * to minimize the color shift into RGB space that uses BT.709
- * primaries.
- */
- HAL_DATASPACE_STANDARD_BT601_525 = 4 << HAL_DATASPACE_STANDARD_SHIFT,
-
- /*
- * Primaries: x y
- * green 0.310 0.595
- * blue 0.155 0.070
- * red 0.630 0.340
- * white (D65) 0.3127 0.3290
- *
- * Use the unadjusted KR = 0.212, KB = 0.087 luminance interpretation
- * for RGB conversion (as in SMPTE 240M).
- */
- HAL_DATASPACE_STANDARD_BT601_525_UNADJUSTED = 5 << HAL_DATASPACE_STANDARD_SHIFT,
-
- /*
- * Primaries: x y
- * green 0.170 0.797
- * blue 0.131 0.046
- * red 0.708 0.292
- * white (D65) 0.3127 0.3290
- *
- * Use the unadjusted KR = 0.2627, KB = 0.0593 luminance interpretation
- * for RGB conversion.
- */
- HAL_DATASPACE_STANDARD_BT2020 = 6 << HAL_DATASPACE_STANDARD_SHIFT,
-
- /*
- * Primaries: x y
- * green 0.170 0.797
- * blue 0.131 0.046
- * red 0.708 0.292
- * white (D65) 0.3127 0.3290
- *
- * Use the unadjusted KR = 0.2627, KB = 0.0593 luminance interpretation
- * for RGB conversion using the linear domain.
- */
- HAL_DATASPACE_STANDARD_BT2020_CONSTANT_LUMINANCE = 7 << HAL_DATASPACE_STANDARD_SHIFT,
-
- /*
- * Primaries: x y
- * green 0.21 0.71
- * blue 0.14 0.08
- * red 0.67 0.33
- * white (C) 0.310 0.316
- *
- * Use the unadjusted KR = 0.30, KB = 0.11 luminance interpretation
- * for RGB conversion.
- */
- HAL_DATASPACE_STANDARD_BT470M = 8 << HAL_DATASPACE_STANDARD_SHIFT,
-
- /*
- * Primaries: x y
- * green 0.243 0.692
- * blue 0.145 0.049
- * red 0.681 0.319
- * white (C) 0.310 0.316
- *
- * Use the unadjusted KR = 0.254, KB = 0.068 luminance interpretation
- * for RGB conversion.
- */
- HAL_DATASPACE_STANDARD_FILM = 9 << HAL_DATASPACE_STANDARD_SHIFT,
-
- HAL_DATASPACE_TRANSFER_SHIFT = 22,
-
- /*
- * Transfer aspect
- *
- * Transfer characteristics are the opto-electronic transfer characteristic
- * at the source as a function of linear optical intensity (luminance).
- *
- * For digital signals, E corresponds to the recorded value. Normally, the
- * transfer function is applied in RGB space to each of the R, G and B
- * components independently. This may result in color shift that can be
- * minized by applying the transfer function in Lab space only for the L
- * component. Implementation may apply the transfer function in RGB space
- * for all pixel formats if desired.
- */
-
- HAL_DATASPACE_TRANSFER_MASK = 31 << HAL_DATASPACE_TRANSFER_SHIFT, // 0x1F
-
- /*
- * Transfer characteristics are unknown or are determined by the
- * application.
- *
- * Implementations should use the following transfer functions:
- *
- * For YCbCr formats: use HAL_DATASPACE_TRANSFER_SMPTE_170M
- * For RGB formats: use HAL_DATASPACE_TRANSFER_SRGB
- *
- * For all other formats transfer function is undefined, and implementations
- * should use an appropriate standard for the data represented.
- */
- HAL_DATASPACE_TRANSFER_UNSPECIFIED = 0 << HAL_DATASPACE_TRANSFER_SHIFT,
-
- /*
- * Transfer characteristic curve:
- * E = L
- * L - luminance of image 0 <= L <= 1 for conventional colorimetry
- * E - corresponding electrical signal
- */
- HAL_DATASPACE_TRANSFER_LINEAR = 1 << HAL_DATASPACE_TRANSFER_SHIFT,
-
- /*
- * Transfer characteristic curve:
- *
- * E = 1.055 * L^(1/2.4) - 0.055 for 0.0031308 <= L <= 1
- * = 12.92 * L for 0 <= L < 0.0031308
- * L - luminance of image 0 <= L <= 1 for conventional colorimetry
- * E - corresponding electrical signal
- */
- HAL_DATASPACE_TRANSFER_SRGB = 2 << HAL_DATASPACE_TRANSFER_SHIFT,
-
- /*
- * BT.601 525, BT.601 625, BT.709, BT.2020
- *
- * Transfer characteristic curve:
- * E = 1.099 * L ^ 0.45 - 0.099 for 0.018 <= L <= 1
- * = 4.500 * L for 0 <= L < 0.018
- * L - luminance of image 0 <= L <= 1 for conventional colorimetry
- * E - corresponding electrical signal
- */
- HAL_DATASPACE_TRANSFER_SMPTE_170M = 3 << HAL_DATASPACE_TRANSFER_SHIFT,
-
- /*
- * Assumed display gamma 2.2.
- *
- * Transfer characteristic curve:
- * E = L ^ (1/2.2)
- * L - luminance of image 0 <= L <= 1 for conventional colorimetry
- * E - corresponding electrical signal
- */
- HAL_DATASPACE_TRANSFER_GAMMA2_2 = 4 << HAL_DATASPACE_TRANSFER_SHIFT,
-
- /*
- * display gamma 2.8.
- *
- * Transfer characteristic curve:
- * E = L ^ (1/2.8)
- * L - luminance of image 0 <= L <= 1 for conventional colorimetry
- * E - corresponding electrical signal
- */
- HAL_DATASPACE_TRANSFER_GAMMA2_8 = 5 << HAL_DATASPACE_TRANSFER_SHIFT,
-
- /*
- * SMPTE ST 2084
- *
- * Transfer characteristic curve:
- * E = ((c1 + c2 * L^n) / (1 + c3 * L^n)) ^ m
- * c1 = c3 - c2 + 1 = 3424 / 4096 = 0.8359375
- * c2 = 32 * 2413 / 4096 = 18.8515625
- * c3 = 32 * 2392 / 4096 = 18.6875
- * m = 128 * 2523 / 4096 = 78.84375
- * n = 0.25 * 2610 / 4096 = 0.1593017578125
- * L - luminance of image 0 <= L <= 1 for HDR colorimetry.
- * L = 1 corresponds to 10000 cd/m2
- * E - corresponding electrical signal
- */
- HAL_DATASPACE_TRANSFER_ST2084 = 6 << HAL_DATASPACE_TRANSFER_SHIFT,
-
- /*
- * ARIB STD-B67 Hybrid Log Gamma
- *
- * Transfer characteristic curve:
- * E = r * L^0.5 for 0 <= L <= 1
- * = a * ln(L - b) + c for 1 < L
- * a = 0.17883277
- * b = 0.28466892
- * c = 0.55991073
- * r = 0.5
- * L - luminance of image 0 <= L for HDR colorimetry. L = 1 corresponds
- * to reference white level of 100 cd/m2
- * E - corresponding electrical signal
- */
- HAL_DATASPACE_TRANSFER_HLG = 7 << HAL_DATASPACE_TRANSFER_SHIFT,
-
- HAL_DATASPACE_RANGE_SHIFT = 27,
-
- /*
- * Range aspect
- *
- * Defines the range of values corresponding to the unit range of 0-1.
- * This is defined for YCbCr only, but can be expanded to RGB space.
- */
- HAL_DATASPACE_RANGE_MASK = 7 << HAL_DATASPACE_RANGE_SHIFT, // 0x7
-
- /*
- * Range is unknown or are determined by the application. Implementations
- * shall use the following suggested ranges:
- *
- * All YCbCr formats: limited range.
- * All RGB or RGBA formats (including RAW and Bayer): full range.
- * All Y formats: full range
- *
- * For all other formats range is undefined, and implementations should use
- * an appropriate range for the data represented.
- */
- HAL_DATASPACE_RANGE_UNSPECIFIED = 0 << HAL_DATASPACE_RANGE_SHIFT,
-
- /*
- * Full range uses all values for Y, Cb and Cr from
- * 0 to 2^b-1, where b is the bit depth of the color format.
- */
- HAL_DATASPACE_RANGE_FULL = 1 << HAL_DATASPACE_RANGE_SHIFT,
-
- /*
- * Limited range uses values 16/256*2^b to 235/256*2^b for Y, and
- * 1/16*2^b to 15/16*2^b for Cb, Cr, R, G and B, where b is the bit depth of
- * the color format.
- *
- * E.g. For 8-bit-depth formats:
- * Luma (Y) samples should range from 16 to 235, inclusive
- * Chroma (Cb, Cr) samples should range from 16 to 240, inclusive
- *
- * For 10-bit-depth formats:
- * Luma (Y) samples should range from 64 to 940, inclusive
- * Chroma (Cb, Cr) samples should range from 64 to 960, inclusive
- */
- HAL_DATASPACE_RANGE_LIMITED = 2 << HAL_DATASPACE_RANGE_SHIFT,
-
- /*
- * Legacy dataspaces
- */
-
- /*
- * sRGB linear encoding:
- *
- * The red, green, and blue components are stored in sRGB space, but
- * are linear, not gamma-encoded.
- * The RGB primaries and the white point are the same as BT.709.
- *
- * The values are encoded using the full range ([0,255] for 8-bit) for all
- * components.
- */
- HAL_DATASPACE_SRGB_LINEAR = 0x200, // deprecated, use HAL_DATASPACE_V0_SRGB_LINEAR
-
- HAL_DATASPACE_V0_SRGB_LINEAR = HAL_DATASPACE_STANDARD_BT709 |
- HAL_DATASPACE_TRANSFER_LINEAR | HAL_DATASPACE_RANGE_FULL,
-
-
- /*
- * sRGB gamma encoding:
- *
- * The red, green and blue components are stored in sRGB space, and
- * converted to linear space when read, using the SRGB transfer function
- * for each of the R, G and B components. When written, the inverse
- * transformation is performed.
- *
- * The alpha component, if present, is always stored in linear space and
- * is left unmodified when read or written.
- *
- * Use full range and BT.709 standard.
- */
- HAL_DATASPACE_SRGB = 0x201, // deprecated, use HAL_DATASPACE_V0_SRGB
-
- HAL_DATASPACE_V0_SRGB = HAL_DATASPACE_STANDARD_BT709 |
- HAL_DATASPACE_TRANSFER_SRGB | HAL_DATASPACE_RANGE_FULL,
-
-
- /*
- * YCbCr Colorspaces
- * -----------------
- *
- * Primaries are given using (x,y) coordinates in the CIE 1931 definition
- * of x and y specified by ISO 11664-1.
- *
- * Transfer characteristics are the opto-electronic transfer characteristic
- * at the source as a function of linear optical intensity (luminance).
- */
-
- /*
- * JPEG File Interchange Format (JFIF)
- *
- * Same model as BT.601-625, but all values (Y, Cb, Cr) range from 0 to 255
- *
- * Use full range, BT.601 transfer and BT.601_625 standard.
- */
- HAL_DATASPACE_JFIF = 0x101, // deprecated, use HAL_DATASPACE_V0_JFIF
-
- HAL_DATASPACE_V0_JFIF = HAL_DATASPACE_STANDARD_BT601_625 |
- HAL_DATASPACE_TRANSFER_SMPTE_170M | HAL_DATASPACE_RANGE_FULL,
-
- /*
- * ITU-R Recommendation 601 (BT.601) - 625-line
- *
- * Standard-definition television, 625 Lines (PAL)
- *
- * Use limited range, BT.601 transfer and BT.601_625 standard.
- */
- HAL_DATASPACE_BT601_625 = 0x102, // deprecated, use HAL_DATASPACE_V0_BT601_625
-
- HAL_DATASPACE_V0_BT601_625 = HAL_DATASPACE_STANDARD_BT601_625 |
- HAL_DATASPACE_TRANSFER_SMPTE_170M | HAL_DATASPACE_RANGE_LIMITED,
-
-
- /*
- * ITU-R Recommendation 601 (BT.601) - 525-line
- *
- * Standard-definition television, 525 Lines (NTSC)
- *
- * Use limited range, BT.601 transfer and BT.601_525 standard.
- */
- HAL_DATASPACE_BT601_525 = 0x103, // deprecated, use HAL_DATASPACE_V0_BT601_525
-
- HAL_DATASPACE_V0_BT601_525 = HAL_DATASPACE_STANDARD_BT601_525 |
- HAL_DATASPACE_TRANSFER_SMPTE_170M | HAL_DATASPACE_RANGE_LIMITED,
-
- /*
- * ITU-R Recommendation 709 (BT.709)
- *
- * High-definition television
- *
- * Use limited range, BT.709 transfer and BT.709 standard.
- */
- HAL_DATASPACE_BT709 = 0x104, // deprecated, use HAL_DATASPACE_V0_BT709
-
- HAL_DATASPACE_V0_BT709 = HAL_DATASPACE_STANDARD_BT709 |
- HAL_DATASPACE_TRANSFER_SMPTE_170M | HAL_DATASPACE_RANGE_LIMITED,
-
- /*
- * Data spaces for non-color formats
- */
-
- /*
- * The buffer contains depth ranging measurements from a depth camera.
- * This value is valid with formats:
- * HAL_PIXEL_FORMAT_Y16: 16-bit samples, consisting of a depth measurement
- * and an associated confidence value. The 3 MSBs of the sample make
- * up the confidence value, and the low 13 LSBs of the sample make up
- * the depth measurement.
- * For the confidence section, 0 means 100% confidence, 1 means 0%
- * confidence. The mapping to a linear float confidence value between
- * 0.f and 1.f can be obtained with
- * float confidence = (((depthSample >> 13) - 1) & 0x7) / 7.0f;
- * The depth measurement can be extracted simply with
- * uint16_t range = (depthSample & 0x1FFF);
- * HAL_PIXEL_FORMAT_BLOB: A depth point cloud, as
- * a variable-length float (x,y,z, confidence) coordinate point list.
- * The point cloud will be represented with the android_depth_points
- * structure.
- */
- HAL_DATASPACE_DEPTH = 0x1000
-
-} android_dataspace_t;
-
-/*
- * Color modes that may be supported by a display.
- *
- * Definitions:
- * Rendering intent generally defines the goal in mapping a source (input)
- * color to a destination device color for a given color mode.
- *
- * It is important to keep in mind three cases where mapping may be applied:
- * 1. The source gamut is much smaller than the destination (display) gamut
- * 2. The source gamut is much larger than the destination gamut (this will
- * ordinarily be handled using colorimetric rendering, below)
- * 3. The source and destination gamuts are roughly equal, although not
- * completely overlapping
- * Also, a common requirement for mappings is that skin tones should be
- * preserved, or at least remain natural in appearance.
- *
- * Colorimetric Rendering Intent (All cases):
- * Colorimetric indicates that colors should be preserved. In the case
- * that the source gamut lies wholly within the destination gamut or is
- * about the same (#1, #3), this will simply mean that no manipulations
- * (no saturation boost, for example) are applied. In the case where some
- * source colors lie outside the destination gamut (#2, #3), those will
- * need to be mapped to colors that are within the destination gamut,
- * while the already in-gamut colors remain unchanged.
- *
- * Non-colorimetric transforms can take many forms. There are no hard
- * rules and it's left to the implementation to define.
- * Two common intents are described below.
- *
- * Stretched-Gamut Enhancement Intent (Source < Destination):
- * When the destination gamut is much larger than the source gamut (#1), the
- * source primaries may be redefined to reflect the full extent of the
- * destination space, or to reflect an intermediate gamut.
- * Skin-tone preservation would likely be applied. An example might be sRGB
- * input displayed on a DCI-P3 capable device, with skin-tone preservation.
- *
- * Within-Gamut Enhancement Intent (Source >= Destination):
- * When the device (destination) gamut is not larger than the source gamut
- * (#2 or #3), but the appearance of a larger gamut is desired, techniques
- * such as saturation boost may be applied to the source colors. Skin-tone
- * preservation may be applied. There is no unique method for within-gamut
- * enhancement; it would be defined within a flexible color mode.
- *
- */
-typedef enum android_color_mode {
-
- /*
- * HAL_COLOR_MODE_DEFAULT is the "native" gamut of the display.
- * White Point: Vendor/OEM defined
- * Panel Gamma: Vendor/OEM defined (typically 2.2)
- * Rendering Intent: Vendor/OEM defined (typically 'enhanced')
- */
- HAL_COLOR_MODE_NATIVE = 0,
-
- /*
- * HAL_COLOR_MODE_STANDARD_BT601_625 corresponds with display
- * settings that implement the ITU-R Recommendation BT.601
- * or Rec 601. Using 625 line version
- * Rendering Intent: Colorimetric
- * Primaries:
- * x y
- * green 0.290 0.600
- * blue 0.150 0.060
- * red 0.640 0.330
- * white (D65) 0.3127 0.3290
- *
- * KR = 0.299, KB = 0.114. This adjusts the luminance interpretation
- * for RGB conversion from the one purely determined by the primaries
- * to minimize the color shift into RGB space that uses BT.709
- * primaries.
- *
- * Gamma Correction (GC):
- *
- * if Vlinear < 0.018
- * Vnonlinear = 4.500 * Vlinear
- * else
- * Vnonlinear = 1.099 * (Vlinear)^(0.45) – 0.099
- */
- HAL_COLOR_MODE_STANDARD_BT601_625 = 1,
-
- /*
- * Primaries:
- * x y
- * green 0.290 0.600
- * blue 0.150 0.060
- * red 0.640 0.330
- * white (D65) 0.3127 0.3290
- *
- * Use the unadjusted KR = 0.222, KB = 0.071 luminance interpretation
- * for RGB conversion.
- *
- * Gamma Correction (GC):
- *
- * if Vlinear < 0.018
- * Vnonlinear = 4.500 * Vlinear
- * else
- * Vnonlinear = 1.099 * (Vlinear)^(0.45) – 0.099
- */
- HAL_COLOR_MODE_STANDARD_BT601_625_UNADJUSTED = 2,
-
- /*
- * Primaries:
- * x y
- * green 0.310 0.595
- * blue 0.155 0.070
- * red 0.630 0.340
- * white (D65) 0.3127 0.3290
- *
- * KR = 0.299, KB = 0.114. This adjusts the luminance interpretation
- * for RGB conversion from the one purely determined by the primaries
- * to minimize the color shift into RGB space that uses BT.709
- * primaries.
- *
- * Gamma Correction (GC):
- *
- * if Vlinear < 0.018
- * Vnonlinear = 4.500 * Vlinear
- * else
- * Vnonlinear = 1.099 * (Vlinear)^(0.45) – 0.099
- */
- HAL_COLOR_MODE_STANDARD_BT601_525 = 3,
-
- /*
- * Primaries:
- * x y
- * green 0.310 0.595
- * blue 0.155 0.070
- * red 0.630 0.340
- * white (D65) 0.3127 0.3290
- *
- * Use the unadjusted KR = 0.212, KB = 0.087 luminance interpretation
- * for RGB conversion (as in SMPTE 240M).
- *
- * Gamma Correction (GC):
- *
- * if Vlinear < 0.018
- * Vnonlinear = 4.500 * Vlinear
- * else
- * Vnonlinear = 1.099 * (Vlinear)^(0.45) – 0.099
- */
- HAL_COLOR_MODE_STANDARD_BT601_525_UNADJUSTED = 4,
-
- /*
- * HAL_COLOR_MODE_REC709 corresponds with display settings that implement
- * the ITU-R Recommendation BT.709 / Rec. 709 for high-definition television.
- * Rendering Intent: Colorimetric
- * Primaries:
- * x y
- * green 0.300 0.600
- * blue 0.150 0.060
- * red 0.640 0.330
- * white (D65) 0.3127 0.3290
- *
- * HDTV REC709 Inverse Gamma Correction (IGC): V represents normalized
- * (with [0 to 1] range) value of R, G, or B.
- *
- * if Vnonlinear < 0.081
- * Vlinear = Vnonlinear / 4.5
- * else
- * Vlinear = ((Vnonlinear + 0.099) / 1.099) ^ (1/0.45)
- *
- * HDTV REC709 Gamma Correction (GC):
- *
- * if Vlinear < 0.018
- * Vnonlinear = 4.5 * Vlinear
- * else
- * Vnonlinear = 1.099 * (Vlinear) ^ 0.45 – 0.099
- */
- HAL_COLOR_MODE_STANDARD_BT709 = 5,
-
- /*
- * HAL_COLOR_MODE_DCI_P3 corresponds with display settings that implement
- * SMPTE EG 432-1 and SMPTE RP 431-2
- * Rendering Intent: Colorimetric
- * Primaries:
- * x y
- * green 0.265 0.690
- * blue 0.150 0.060
- * red 0.680 0.320
- * white (D65) 0.3127 0.3290
- *
- * Gamma: 2.2
- */
- HAL_COLOR_MODE_DCI_P3 = 6,
-
- /*
- * HAL_COLOR_MODE_SRGB corresponds with display settings that implement
- * the sRGB color space. Uses the same primaries as ITU-R Recommendation
- * BT.709
- * Rendering Intent: Colorimetric
- * Primaries:
- * x y
- * green 0.300 0.600
- * blue 0.150 0.060
- * red 0.640 0.330
- * white (D65) 0.3127 0.3290
- *
- * PC/Internet (sRGB) Inverse Gamma Correction (IGC):
- *
- * if Vnonlinear ≤ 0.03928
- * Vlinear = Vnonlinear / 12.92
- * else
- * Vlinear = ((Vnonlinear + 0.055)/1.055) ^ 2.4
- *
- * PC/Internet (sRGB) Gamma Correction (GC):
- *
- * if Vlinear ≤ 0.0031308
- * Vnonlinear = 12.92 * Vlinear
- * else
- * Vnonlinear = 1.055 * (Vlinear)^(1/2.4) – 0.055
- */
- HAL_COLOR_MODE_SRGB = 7,
-
- /*
- * HAL_COLOR_MODE_ADOBE_RGB corresponds with the RGB color space developed
- * by Adobe Systems, Inc. in 1998.
- * Rendering Intent: Colorimetric
- * Primaries:
- * x y
- * green 0.210 0.710
- * blue 0.150 0.060
- * red 0.640 0.330
- * white (D65) 0.3127 0.3290
- *
- * Gamma: 2.2
- */
- HAL_COLOR_MODE_ADOBE_RGB = 8
-
-} android_color_mode_t;
-
-/*
- * Color transforms that may be applied by hardware composer to the whole
- * display.
- */
-typedef enum android_color_transform {
- /* Applies no transform to the output color */
- HAL_COLOR_TRANSFORM_IDENTITY = 0,
-
- /* Applies an arbitrary transform defined by a 4x4 affine matrix */
- HAL_COLOR_TRANSFORM_ARBITRARY_MATRIX = 1,
-
- /* Applies a transform that inverts the value or luminance of the color, but
- * does not modify hue or saturation */
- HAL_COLOR_TRANSFORM_VALUE_INVERSE = 2,
-
- /* Applies a transform that maps all colors to shades of gray */
- HAL_COLOR_TRANSFORM_GRAYSCALE = 3,
-
- /* Applies a transform which corrects for protanopic color blindness */
- HAL_COLOR_TRANSFORM_CORRECT_PROTANOPIA = 4,
-
- /* Applies a transform which corrects for deuteranopic color blindness */
- HAL_COLOR_TRANSFORM_CORRECT_DEUTERANOPIA = 5,
-
- /* Applies a transform which corrects for tritanopic color blindness */
- HAL_COLOR_TRANSFORM_CORRECT_TRITANOPIA = 6
-} android_color_transform_t;
-
-/*
- * Supported HDR formats. Must be kept in sync with equivalents in Display.java.
- */
-typedef enum android_hdr {
- /* Device supports Dolby Vision HDR */
- HAL_HDR_DOLBY_VISION = 1,
-
- /* Device supports HDR10 */
- HAL_HDR_HDR10 = 2,
-
- /* Device supports hybrid log-gamma HDR */
- HAL_HDR_HLG = 3
-} android_hdr_t;
-
#ifdef __cplusplus
}
#endif
diff --git a/include/system/radio.h b/include/system/radio.h
index d73d3ae..b164fc8 100644
--- a/include/system/radio.h
+++ b/include/system/radio.h
@@ -81,7 +81,7 @@
} radio_direction_t;
/* unique handle allocated to a radio module */
-typedef unsigned int radio_handle_t;
+typedef uint32_t radio_handle_t;
/* Opaque meta data structure used by radio meta data API (see system/radio_metadata.h) */
typedef struct radio_medtadata radio_metadata_t;
@@ -109,10 +109,10 @@
typedef struct radio_hal_band_config {
radio_band_t type;
bool antenna_connected;
- unsigned int lower_limit;
- unsigned int upper_limit;
- unsigned int num_spacings;
- unsigned int spacings[RADIO_NUM_SPACINGS_MAX];
+ uint32_t lower_limit;
+ uint32_t upper_limit;
+ uint32_t num_spacings;
+ uint32_t spacings[RADIO_NUM_SPACINGS_MAX];
union {
radio_hal_fm_band_config_t fm;
radio_hal_am_band_config_t am;
@@ -137,10 +137,10 @@
char product[RADIO_STRING_LEN_MAX]; /* product name */
char version[RADIO_STRING_LEN_MAX]; /* product version */
char serial[RADIO_STRING_LEN_MAX]; /* serial number (for subscription services) */
- unsigned int num_tuners; /* number of tuners controllable independently */
- unsigned int num_audio_sources; /* number of audio sources driven simultaneously */
+ uint32_t num_tuners; /* number of tuners controllable independently */
+ uint32_t num_audio_sources; /* number of audio sources driven simultaneously */
bool supports_capture; /* the hardware supports capture of audio source audio HAL */
- unsigned int num_bands; /* number of band descriptors */
+ uint32_t num_bands; /* number of band descriptors */
radio_hal_band_config_t bands[RADIO_NUM_BANDS_MAX]; /* band descriptors */
} radio_hal_properties_t;
@@ -153,10 +153,10 @@
char product[RADIO_STRING_LEN_MAX];
char version[RADIO_STRING_LEN_MAX];
char serial[RADIO_STRING_LEN_MAX];
- unsigned int num_tuners;
- unsigned int num_audio_sources;
+ uint32_t num_tuners;
+ uint32_t num_audio_sources;
bool supports_capture;
- unsigned int num_bands;
+ uint32_t num_bands;
radio_band_config_t bands[RADIO_NUM_BANDS_MAX];
} radio_properties_t;
@@ -164,13 +164,14 @@
* Contains information on currently tuned channel.
*/
typedef struct radio_program_info {
- unsigned int channel; /* current channel. (e.g kHz for band type RADIO_BAND_FM) */
- unsigned int sub_channel; /* current sub channel. (used for RADIO_BAND_FM_HD) */
+ uint32_t channel; /* current channel. (e.g kHz for band type RADIO_BAND_FM) */
+ uint32_t sub_channel; /* current sub channel. (used for RADIO_BAND_FM_HD) */
bool tuned; /* tuned to a program or not */
bool stereo; /* program is stereo or not */
bool digital; /* digital program or not (e.g HD Radio program) */
- unsigned int signal_strength; /* signal strength from 0 to 100 */
- radio_metadata_t *metadata; /* non null if meta data are present (e.g PTY, song title ...) */
+ uint32_t signal_strength; /* signal strength from 0 to 100 */
+ /* non null if meta data are present (e.g PTY, song title ...) */
+ __attribute__((aligned(8))) radio_metadata_t *metadata;
} radio_program_info_t;
@@ -195,7 +196,7 @@
/* Event passed to the framework by the HAL callback */
typedef struct radio_hal_event {
radio_event_type_t type; /* event type */
- int status; /* used by RADIO_EVENT_CONFIG, RADIO_EVENT_TUNED */
+ int32_t status; /* used by RADIO_EVENT_CONFIG, RADIO_EVENT_TUNED */
union {
/* RADIO_EVENT_ANTENNA, RADIO_EVENT_TA, RADIO_EVENT_EA */
bool on;
@@ -208,12 +209,13 @@
/* Used internally by the framework. Same information as in struct radio_hal_event */
typedef struct radio_event {
radio_event_type_t type;
- int status;
+ int32_t status;
union {
bool on;
radio_band_config_t config;
radio_program_info_t info;
- radio_metadata_t *metadata; /* offset from start of struct when in shared memory */
+ /* non null if meta data are present (e.g PTY, song title ...) */
+ __attribute__((aligned(8))) radio_metadata_t *metadata;
};
} radio_event_t;
diff --git a/include/system/window.h b/include/system/window.h
index f439705..3faf2fb 100644
--- a/include/system/window.h
+++ b/include/system/window.h
@@ -121,8 +121,9 @@
int stride;
int format;
int usage;
+ uintptr_t layerCount;
- void* reserved[2];
+ void* reserved[1];
buffer_handle_t handle;
@@ -297,6 +298,13 @@
* Returns the duration of the last queueBuffer call in microseconds
*/
NATIVE_WINDOW_LAST_QUEUE_DURATION = 15,
+
+ /*
+ * Returns the number of image layers that the ANativeWindow buffer
+ * contains. By default this is 1, unless a buffer is explicitly allocated
+ * to contain multiple layers.
+ */
+ NATIVE_WINDOW_LAYER_COUNT = 16,
};
/* Valid operations for the (*perform)() hook.
diff --git a/include/utils/SortedVector.h b/include/utils/SortedVector.h
index 86f3496..d57465d 100644
--- a/include/utils/SortedVector.h
+++ b/include/utils/SortedVector.h
@@ -37,18 +37,18 @@
public:
typedef TYPE value_type;
-
- /*!
+
+ /*!
* Constructors and destructors
*/
-
+
SortedVector();
SortedVector(const SortedVector<TYPE>& rhs);
virtual ~SortedVector();
/*! copy operator */
- const SortedVector<TYPE>& operator = (const SortedVector<TYPE>& rhs) const;
- SortedVector<TYPE>& operator = (const SortedVector<TYPE>& rhs);
+ const SortedVector<TYPE>& operator = (const SortedVector<TYPE>& rhs) const;
+ SortedVector<TYPE>& operator = (const SortedVector<TYPE>& rhs);
/*
* empty the vector
@@ -56,7 +56,7 @@
inline void clear() { VectorImpl::clear(); }
- /*!
+ /*!
* vector stats
*/
@@ -69,11 +69,11 @@
//! sets the capacity. capacity can never be reduced less than size()
inline ssize_t setCapacity(size_t size) { return VectorImpl::setCapacity(size); }
- /*!
+ /*!
* C-style array access
*/
-
- //! read-only C-style access
+
+ //! read-only C-style access
inline const TYPE* array() const;
//! read-write C-style access. BE VERY CAREFUL when modifying the array
@@ -82,12 +82,12 @@
//! finds the index of an item
ssize_t indexOf(const TYPE& item) const;
-
+
//! finds where this item should be inserted
size_t orderOf(const TYPE& item) const;
-
-
- /*!
+
+
+ /*!
* accessors
*/
@@ -104,7 +104,7 @@
//! add an item in the right place (and replace the one that is there)
ssize_t add(const TYPE& item);
-
+
//! editItemAt() MUST NOT change the order of this item
TYPE& editItemAt(size_t index) {
return *( static_cast<TYPE *>(VectorImpl::editItemLocation(index)) );
@@ -113,7 +113,7 @@
//! merges a vector into this one
ssize_t merge(const Vector<TYPE>& vector);
ssize_t merge(const SortedVector<TYPE>& vector);
-
+
//! removes an item
ssize_t remove(const TYPE&);
@@ -121,7 +121,24 @@
inline ssize_t removeItemsAt(size_t index, size_t count = 1);
//! remove one item
inline ssize_t removeAt(size_t index) { return removeItemsAt(index); }
-
+
+ /*
+ * these inlines add some level of compatibility with STL.
+ */
+ typedef TYPE* iterator;
+ typedef TYPE const* const_iterator;
+
+ inline iterator begin() { return editArray(); }
+ inline iterator end() { return editArray() + size(); }
+ inline const_iterator begin() const { return array(); }
+ inline const_iterator end() const { return array() + size(); }
+ inline void reserve(size_t n) { setCapacity(n); }
+ inline bool empty() const{ return isEmpty(); }
+ inline iterator erase(iterator pos) {
+ ssize_t index = removeItemsAt(pos-array());
+ return begin() + index;
+ }
+
protected:
virtual void do_construct(void* storage, size_t num) const;
virtual void do_destroy(void* storage, size_t num) const;
@@ -159,13 +176,13 @@
template<class TYPE> inline
SortedVector<TYPE>& SortedVector<TYPE>::operator = (const SortedVector<TYPE>& rhs) {
SortedVectorImpl::operator = (rhs);
- return *this;
+ return *this;
}
template<class TYPE> inline
const SortedVector<TYPE>& SortedVector<TYPE>::operator = (const SortedVector<TYPE>& rhs) const {
SortedVectorImpl::operator = (rhs);
- return *this;
+ return *this;
}
template<class TYPE> inline
diff --git a/init/init.cpp b/init/init.cpp
index cbd46bf..9573718 100644
--- a/init/init.cpp
+++ b/init/init.cpp
@@ -50,6 +50,7 @@
#include <cutils/sockets.h>
#include <private/android_filesystem_config.h>
+#include <fstream>
#include <memory>
#include "action.h"
@@ -250,6 +251,113 @@
return result;
}
+static void security_failure() {
+ LOG(ERROR) << "Security failure; rebooting into recovery mode...";
+ android_reboot(ANDROID_RB_RESTART2, 0, "recovery");
+ while (true) { pause(); } // never reached
+}
+
+#define MMAP_RND_PATH "/proc/sys/vm/mmap_rnd_bits"
+#define MMAP_RND_COMPAT_PATH "/proc/sys/vm/mmap_rnd_compat_bits"
+
+/* __attribute__((unused)) due to lack of mips support: see mips block
+ * in set_mmap_rnd_bits_action */
+static bool __attribute__((unused)) set_mmap_rnd_bits_min(int start, int min, bool compat) {
+ std::string path;
+ if (compat) {
+ path = MMAP_RND_COMPAT_PATH;
+ } else {
+ path = MMAP_RND_PATH;
+ }
+ std::ifstream inf(path, std::fstream::in);
+ if (!inf) {
+ LOG(ERROR) << "Cannot open for reading: " << path;
+ return false;
+ }
+ while (start >= min) {
+ // try to write out new value
+ std::string str_val = std::to_string(start);
+ std::ofstream of(path, std::fstream::out);
+ if (!of) {
+ LOG(ERROR) << "Cannot open for writing: " << path;
+ return false;
+ }
+ of << str_val << std::endl;
+ of.close();
+
+ // check to make sure it was recorded
+ inf.seekg(0);
+ std::string str_rec;
+ inf >> str_rec;
+ if (str_val.compare(str_rec) == 0) {
+ break;
+ }
+ start--;
+ }
+ inf.close();
+ if (start < min) {
+ LOG(ERROR) << "Unable to set minimum required entropy " << min << " in " << path;
+ return false;
+ }
+ return true;
+}
+
+/*
+ * Set /proc/sys/vm/mmap_rnd_bits and potentially
+ * /proc/sys/vm/mmap_rnd_compat_bits to the maximum supported values.
+ * Returns -1 if unable to set these to an acceptable value.
+ *
+ * To support this sysctl, the following upstream commits are needed:
+ *
+ * d07e22597d1d mm: mmap: add new /proc tunable for mmap_base ASLR
+ * e0c25d958f78 arm: mm: support ARCH_MMAP_RND_BITS
+ * 8f0d3aa9de57 arm64: mm: support ARCH_MMAP_RND_BITS
+ * 9e08f57d684a x86: mm: support ARCH_MMAP_RND_BITS
+ * ec9ee4acd97c drivers: char: random: add get_random_long()
+ * 5ef11c35ce86 mm: ASLR: use get_random_long()
+ */
+static int set_mmap_rnd_bits_action(const std::vector<std::string>& args)
+{
+ int ret = -1;
+
+ /* values are arch-dependent */
+#if defined(__aarch64__)
+ /* arm64 supports 18 - 33 bits depending on pagesize and VA_SIZE */
+ if (set_mmap_rnd_bits_min(33, 24, false)
+ && set_mmap_rnd_bits_min(16, 16, true)) {
+ ret = 0;
+ }
+#elif defined(__x86_64__)
+ /* x86_64 supports 28 - 32 bits */
+ if (set_mmap_rnd_bits_min(32, 32, false)
+ && set_mmap_rnd_bits_min(16, 16, true)) {
+ ret = 0;
+ }
+#elif defined(__arm__) || defined(__i386__)
+ /* check to see if we're running on 64-bit kernel */
+ bool h64 = !access(MMAP_RND_COMPAT_PATH, F_OK);
+ /* supported 32-bit architecture must have 16 bits set */
+ if (set_mmap_rnd_bits_min(16, 16, h64)) {
+ ret = 0;
+ }
+#elif defined(__mips__) || defined(__mips64__)
+ // TODO: add mips support b/27788820
+ ret = 0;
+#else
+ ERROR("Unknown architecture\n");
+#endif
+
+#ifdef __BRILLO__
+ // TODO: b/27794137
+ ret = 0;
+#endif
+ if (ret == -1) {
+ LOG(ERROR) << "Unable to set adequate mmap entropy value!";
+ security_failure();
+ }
+ return ret;
+}
+
static int keychord_init_action(const std::vector<std::string>& args)
{
keychord_init();
@@ -402,12 +510,6 @@
return 0;
}
-static void security_failure() {
- LOG(ERROR) << "Security failure; rebooting into recovery mode...";
- android_reboot(ANDROID_RB_RESTART2, 0, "recovery");
- while (true) { pause(); } // never reached
-}
-
static void selinux_initialize(bool in_kernel_domain) {
Timer t;
@@ -691,6 +793,7 @@
am.QueueBuiltinAction(wait_for_coldboot_done_action, "wait_for_coldboot_done");
// ... so that we can start queuing up actions that require stuff from /dev.
am.QueueBuiltinAction(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");
+ am.QueueBuiltinAction(set_mmap_rnd_bits_action, "set_mmap_rnd_bits");
am.QueueBuiltinAction(keychord_init_action, "keychord_init");
am.QueueBuiltinAction(console_init_action, "console_init");
diff --git a/libcutils/fs_config.c b/libcutils/fs_config.c
index 032e361..99f97d1 100644
--- a/libcutils/fs_config.c
+++ b/libcutils/fs_config.c
@@ -151,7 +151,8 @@
"system/bin/inputflinger" },
/* Support FIFO scheduling mode in SurfaceFlinger. */
- { 00755, AID_SYSTEM, AID_GRAPHICS, CAP_MASK_LONG(CAP_SYS_NICE), "system/bin/surfaceflinger" },
+ { 00755, AID_SYSTEM, AID_GRAPHICS, CAP_MASK_LONG(CAP_SYS_NICE),
+ "system/bin/surfaceflinger" },
/* Support hostapd administering a network interface. */
{ 00755, AID_WIFI, AID_WIFI, CAP_MASK_LONG(CAP_NET_ADMIN) |
diff --git a/libmemtrack/Android.bp b/libmemtrack/Android.bp
index 98413dd..9310b24 100644
--- a/libmemtrack/Android.bp
+++ b/libmemtrack/Android.bp
@@ -2,13 +2,18 @@
cc_library_shared {
name: "libmemtrack",
- srcs: ["memtrack.c"],
+ srcs: ["memtrack.cpp"],
export_include_dirs: ["include"],
local_include_dirs: ["include"],
include_dirs: ["hardware/libhardware/include"],
shared_libs: [
"libhardware",
"liblog",
+ "libbase",
+ "libhidl",
+ "libhwbinder",
+ "libutils",
+ "android.hardware.memtrack@1.0",
],
cflags: [
"-Wall",
diff --git a/libmemtrack/include/memtrack/memtrack.h b/libmemtrack/include/memtrack/memtrack.h
index 8c0ab89..2134a6f 100644
--- a/libmemtrack/include/memtrack/memtrack.h
+++ b/libmemtrack/include/memtrack/memtrack.h
@@ -35,16 +35,6 @@
struct memtrack_proc;
/**
- * memtrack_init
- *
- * Must be called once before calling any other functions. After this function
- * is called, everything else is thread-safe.
- *
- * Returns 0 on success, -errno on error.
- */
-int memtrack_init(void);
-
-/**
* memtrack_proc_new
*
* Return a new handle to hold process memory stats.
diff --git a/libmemtrack/memtrack.c b/libmemtrack/memtrack.c
deleted file mode 100644
index 29cc92c..0000000
--- a/libmemtrack/memtrack.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Copyright (C) 2013 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#define LOG_TAG "memtrack"
-
-#include <memtrack/memtrack.h>
-
-#include <errno.h>
-#include <malloc.h>
-#include <string.h>
-
-#include <android/log.h>
-#include <hardware/memtrack.h>
-
-#define ARRAY_SIZE(x) (sizeof(x)/sizeof((x)[0]))
-
-static const memtrack_module_t *module;
-
-struct memtrack_proc {
- pid_t pid;
- struct memtrack_proc_type {
- enum memtrack_type type;
- size_t num_records;
- size_t allocated_records;
- struct memtrack_record *records;
- } types[MEMTRACK_NUM_TYPES];
-};
-
-int memtrack_init(void)
-{
- int err;
-
- if (module) {
- return 0;
- }
-
- err = hw_get_module(MEMTRACK_HARDWARE_MODULE_ID,
- (hw_module_t const**)&module);
- if (err) {
- ALOGE("Couldn't load %s module (%s)", MEMTRACK_HARDWARE_MODULE_ID,
- strerror(-err));
- return err;
- }
-
- return module->init(module);
-}
-
-struct memtrack_proc *memtrack_proc_new(void)
-{
- if (!module) {
- return NULL;
- }
-
- return calloc(sizeof(struct memtrack_proc), 1);
-}
-
-void memtrack_proc_destroy(struct memtrack_proc *p)
-{
- enum memtrack_type i;
-
- if (p) {
- for (i = 0; i < MEMTRACK_NUM_TYPES; i++) {
- free(p->types[i].records);
- }
- }
- free(p);
-}
-
-static int memtrack_proc_get_type(struct memtrack_proc_type *t,
- pid_t pid, enum memtrack_type type)
-{
- size_t num_records = t->num_records;
- int ret;
-
-retry:
- ret = module->getMemory(module, pid, type, t->records, &num_records);
- if (ret) {
- t->num_records = 0;
- return ret;
- }
- if (num_records > t->allocated_records) {
- /* Need more records than allocated */
- free(t->records);
- t->records = calloc(sizeof(*t->records), num_records);
- if (!t->records) {
- return -ENOMEM;
- }
- t->allocated_records = num_records;
- goto retry;
- }
- t->num_records = num_records;
-
- return 0;
-}
-
-/* TODO: sanity checks on return values from HALs:
- * make sure no records have invalid flags set
- * - unknown flags
- * - too many flags of a single category
- * - missing ACCOUNTED/UNACCOUNTED
- * make sure there are not overlapping SHARED and SHARED_PSS records
- */
-static int memtrack_proc_sanity_check(struct memtrack_proc *p)
-{
- (void)p;
- return 0;
-}
-
-int memtrack_proc_get(struct memtrack_proc *p, pid_t pid)
-{
- enum memtrack_type i;
-
- if (!module) {
- return -EINVAL;
- }
-
- if (!p) {
- return -EINVAL;
- }
-
- p->pid = pid;
- for (i = 0; i < MEMTRACK_NUM_TYPES; i++) {
- memtrack_proc_get_type(&p->types[i], pid, i);
- }
-
- return memtrack_proc_sanity_check(p);
-}
-
-static ssize_t memtrack_proc_sum(struct memtrack_proc *p,
- enum memtrack_type types[], size_t num_types,
- unsigned int flags)
-{
- ssize_t sum = 0;
- size_t i;
- size_t j;
-
- for (i = 0; i < num_types; i++) {
- enum memtrack_type type = types[i];
- for (j = 0; j < p->types[type].num_records; j++) {
- if ((p->types[type].records[j].flags & flags) == flags) {
- sum += p->types[type].records[j].size_in_bytes;
- }
- }
- }
-
- return sum;
-}
-
-ssize_t memtrack_proc_graphics_total(struct memtrack_proc *p)
-{
- enum memtrack_type types[] = { MEMTRACK_TYPE_GRAPHICS };
- return memtrack_proc_sum(p, types, ARRAY_SIZE(types), 0);
-}
-
-ssize_t memtrack_proc_graphics_pss(struct memtrack_proc *p)
-{
- enum memtrack_type types[] = { MEMTRACK_TYPE_GRAPHICS };
- return memtrack_proc_sum(p, types, ARRAY_SIZE(types),
- MEMTRACK_FLAG_SMAPS_UNACCOUNTED);
-}
-
-ssize_t memtrack_proc_gl_total(struct memtrack_proc *p)
-{
- enum memtrack_type types[] = { MEMTRACK_TYPE_GL };
- return memtrack_proc_sum(p, types, ARRAY_SIZE(types), 0);
-}
-
-ssize_t memtrack_proc_gl_pss(struct memtrack_proc *p)
-{
- enum memtrack_type types[] = { MEMTRACK_TYPE_GL };
- return memtrack_proc_sum(p, types, ARRAY_SIZE(types),
- MEMTRACK_FLAG_SMAPS_UNACCOUNTED);
-}
-
-ssize_t memtrack_proc_other_total(struct memtrack_proc *p)
-{
- enum memtrack_type types[] = { MEMTRACK_TYPE_MULTIMEDIA,
- MEMTRACK_TYPE_CAMERA,
- MEMTRACK_TYPE_OTHER };
- return memtrack_proc_sum(p, types, ARRAY_SIZE(types), 0);
-}
-
-ssize_t memtrack_proc_other_pss(struct memtrack_proc *p)
-{
- enum memtrack_type types[] = { MEMTRACK_TYPE_MULTIMEDIA,
- MEMTRACK_TYPE_CAMERA,
- MEMTRACK_TYPE_OTHER };
- return memtrack_proc_sum(p, types, ARRAY_SIZE(types),
- MEMTRACK_FLAG_SMAPS_UNACCOUNTED);
-}
diff --git a/libmemtrack/memtrack.cpp b/libmemtrack/memtrack.cpp
new file mode 100644
index 0000000..9b874da
--- /dev/null
+++ b/libmemtrack/memtrack.cpp
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#define LOG_TAG "memtrack"
+#include <android/hardware/memtrack/1.0/IMemtrack.h>
+#include <memtrack/memtrack.h>
+
+#include <errno.h>
+#include <malloc.h>
+#include <vector>
+#include <string.h>
+#include <mutex>
+
+using android::hardware::memtrack::V1_0::IMemtrack;
+using android::hardware::memtrack::V1_0::MemtrackType;
+using android::hardware::memtrack::V1_0::MemtrackRecord;
+using android::hardware::memtrack::V1_0::MemtrackFlag;
+using android::hardware::memtrack::V1_0::MemtrackStatus;
+using android::hardware::hidl_vec;
+
+struct memtrack_proc_type {
+ MemtrackType type;
+ std::vector<MemtrackRecord> records;
+};
+
+struct memtrack_proc {
+ pid_t pid;
+ memtrack_proc_type types[static_cast<int>(MemtrackType::NUM_TYPES)];
+};
+
+//TODO(b/31632518)
+static android::sp<IMemtrack> get_instance() {
+ static android::sp<IMemtrack> module = IMemtrack::getService("memtrack");
+ if (module == nullptr) {
+ ALOGE("Couldn't load memtrack module");
+ }
+ return module;
+}
+
+memtrack_proc *memtrack_proc_new(void)
+{
+ return new memtrack_proc();
+}
+
+void memtrack_proc_destroy(memtrack_proc *p)
+{
+ delete(p);
+}
+
+static int memtrack_proc_get_type(memtrack_proc_type *t,
+ pid_t pid, MemtrackType type)
+{
+ int err = 0;
+ android::sp<IMemtrack> memtrack = get_instance();
+ if (memtrack == nullptr)
+ return -1;
+
+ memtrack->getMemory(pid, type,
+ [&t, &err](MemtrackStatus status, hidl_vec<MemtrackRecord> records) {
+ if (status != MemtrackStatus::SUCCESS) {
+ err = -1;
+ t->records.resize(0);
+ }
+ t->records.resize(records.size());
+ for (size_t i = 0; i < records.size(); i++) {
+ t->records[i].sizeInBytes = records[i].sizeInBytes;
+ t->records[i].flags = records[i].flags;
+ }
+ });
+ return err;
+}
+
+/* TODO: sanity checks on return values from HALs:
+ * make sure no records have invalid flags set
+ * - unknown flags
+ * - too many flags of a single category
+ * - missing ACCOUNTED/UNACCOUNTED
+ * make sure there are not overlapping SHARED and SHARED_PSS records
+ */
+static int memtrack_proc_sanity_check(memtrack_proc* /*p*/)
+{
+ return 0;
+}
+
+int memtrack_proc_get(memtrack_proc *p, pid_t pid)
+{
+ if (!p) {
+ return -EINVAL;
+ }
+
+ p->pid = pid;
+ for (uint32_t i = 0; i < (uint32_t)MemtrackType::NUM_TYPES; i++) {
+ int ret = memtrack_proc_get_type(&p->types[i], pid, (MemtrackType)i);
+ if (ret != 0)
+ return ret;
+ }
+
+ return memtrack_proc_sanity_check(p);
+}
+
+static ssize_t memtrack_proc_sum(memtrack_proc *p,
+ const std::vector<MemtrackType>& types, uint32_t flags)
+{
+ ssize_t sum = 0;
+
+ for (size_t i = 0; i < types.size(); i++) {
+ memtrack_proc_type type = p->types[static_cast<int>(types[i])];
+ std::vector<MemtrackRecord> records = type.records;
+ for (size_t j = 0; j < records.size(); j++) {
+ if ((records[j].flags & flags) == flags) {
+ sum += records[j].sizeInBytes;
+ }
+ }
+ }
+
+ return sum;
+}
+
+ssize_t memtrack_proc_graphics_total(memtrack_proc *p)
+{
+ std::vector<MemtrackType> types = {MemtrackType::GRAPHICS};
+ return memtrack_proc_sum(p, types, 0);
+}
+
+ssize_t memtrack_proc_graphics_pss(memtrack_proc *p)
+{
+ std::vector<MemtrackType> types = { MemtrackType::GRAPHICS };
+ return memtrack_proc_sum(p, types,
+ (uint32_t)MemtrackFlag::SMAPS_UNACCOUNTED);
+}
+
+ssize_t memtrack_proc_gl_total(memtrack_proc *p)
+{
+ std::vector<MemtrackType> types = { MemtrackType::GL };
+ return memtrack_proc_sum(p, types, 0);
+}
+
+ssize_t memtrack_proc_gl_pss(memtrack_proc *p)
+{
+ std::vector<MemtrackType> types = { MemtrackType::GL };
+ return memtrack_proc_sum(p, types,
+ (uint32_t)MemtrackFlag::SMAPS_UNACCOUNTED);
+}
+
+ssize_t memtrack_proc_other_total(memtrack_proc *p)
+{
+ std::vector<MemtrackType> types = { MemtrackType::MULTIMEDIA,
+ MemtrackType::CAMERA, MemtrackType::OTHER };
+ return memtrack_proc_sum(p, types, 0);
+}
+
+ssize_t memtrack_proc_other_pss(memtrack_proc *p)
+{
+ std::vector<MemtrackType> types = { MemtrackType::MULTIMEDIA,
+ MemtrackType::CAMERA, MemtrackType::OTHER };
+ return memtrack_proc_sum(p, types,
+ (uint32_t)MemtrackFlag::SMAPS_UNACCOUNTED);
+}
diff --git a/libmemtrack/memtrack_test.c b/libmemtrack/memtrack_test.c
index eaadfa7..77c935e 100644
--- a/libmemtrack/memtrack_test.c
+++ b/libmemtrack/memtrack_test.c
@@ -82,12 +82,6 @@
(void)argc;
(void)argv;
- ret = memtrack_init();
- if (ret < 0) {
- fprintf(stderr, "failed to initialize HAL: %s (%d)\n", strerror(-ret), ret);
- exit(EXIT_FAILURE);
- }
-
ret = pm_kernel_create(&ker);
if (ret) {
fprintf(stderr, "Error creating kernel interface -- "
diff --git a/libsparse/simg_dump.py b/libsparse/simg_dump.py
index c70d45f..82a03ad 100755
--- a/libsparse/simg_dump.py
+++ b/libsparse/simg_dump.py
@@ -15,43 +15,64 @@
# limitations under the License.
from __future__ import print_function
-import getopt, posixpath, signal, struct, sys
+import csv
+import getopt
+import hashlib
+import posixpath
+import signal
+import struct
+import sys
+
def usage(argv0):
print("""
-Usage: %s [-v] sparse_image_file ...
+Usage: %s [-v] [-s] [-c <filename>] sparse_image_file ...
-v verbose output
-""" % ( argv0 ))
+ -s show sha1sum of data blocks
+ -c <filename> save .csv file of blocks
+""" % (argv0))
sys.exit(2)
-def main():
+def main():
signal.signal(signal.SIGPIPE, signal.SIG_DFL)
me = posixpath.basename(sys.argv[0])
# Parse the command line
- verbose = 0 # -v
+ verbose = 0 # -v
+ showhash = 0 # -s
+ csvfilename = None # -c
try:
opts, args = getopt.getopt(sys.argv[1:],
- "v",
- ["verbose"])
+ "vsc:",
+ ["verbose", "showhash", "csvfile"])
except getopt.GetoptError, e:
print(e)
usage(me)
for o, a in opts:
if o in ("-v", "--verbose"):
verbose += 1
+ elif o in ("-s", "--showhash"):
+ showhash = True
+ elif o in ("-c", "--csvfile"):
+ csvfilename = a
else:
print("Unrecognized option \"%s\"" % (o))
usage(me)
- if len(args) == 0:
+ if not args:
print("No sparse_image_file specified")
usage(me)
+ if csvfilename:
+ csvfile = open(csvfilename, "wb")
+ csvwriter = csv.writer(csvfile)
+
+ output = verbose or csvfilename or showhash
+
for path in args:
- FH = open(path, 'rb')
+ FH = open(path, "rb")
header_bin = FH.read(28)
header = struct.unpack("<I4H4I", header_bin)
@@ -88,71 +109,99 @@
if image_checksum != 0:
print("checksum=0x%08X" % (image_checksum))
- if not verbose:
+ if not output:
continue
- print(" input_bytes output_blocks")
- print("chunk offset number offset number")
+
+ if verbose > 0:
+ print(" input_bytes output_blocks")
+ print("chunk offset number offset number")
+
+ if csvfilename:
+ csvwriter.writerow(["chunk", "input offset", "input bytes",
+ "output offset", "output blocks", "type", "hash"])
+
offset = 0
- for i in xrange(1,total_chunks+1):
+ for i in xrange(1, total_chunks + 1):
header_bin = FH.read(12)
header = struct.unpack("<2H2I", header_bin)
chunk_type = header[0]
- reserved1 = header[1]
chunk_sz = header[2]
total_sz = header[3]
data_sz = total_sz - 12
+ curhash = ""
+ curtype = ""
+ curpos = FH.tell()
- print("%4u %10u %10u %7u %7u" % (i, FH.tell(), data_sz, offset, chunk_sz),
- end=" ")
+ if verbose > 0:
+ print("%4u %10u %10u %7u %7u" % (i, curpos, data_sz, offset, chunk_sz),
+ end=" ")
if chunk_type == 0xCAC1:
if data_sz != (chunk_sz * blk_sz):
print("Raw chunk input size (%u) does not match output size (%u)"
% (data_sz, chunk_sz * blk_sz))
- break;
+ break
else:
- print("Raw data", end="")
- FH.read(data_sz)
+ curtype = "Raw data"
+ data = FH.read(data_sz)
+ if showhash:
+ h = hashlib.sha1()
+ h.update(data)
+ curhash = h.hexdigest()
elif chunk_type == 0xCAC2:
if data_sz != 4:
print("Fill chunk should have 4 bytes of fill, but this has %u"
- % (data_sz), end="")
- break;
+ % (data_sz))
+ break
else:
fill_bin = FH.read(4)
fill = struct.unpack("<I", fill_bin)
- print("Fill with 0x%08X" % (fill))
+ curtype = format("Fill with 0x%08X" % (fill))
+ if showhash:
+ h = hashlib.sha1()
+ data = fill_bin * (blk_sz / 4);
+ for block in xrange(chunk_sz):
+ h.update(data)
+ curhash = h.hexdigest()
elif chunk_type == 0xCAC3:
if data_sz != 0:
print("Don't care chunk input size is non-zero (%u)" % (data_sz))
- break;
+ break
else:
- print("Don't care", end="")
+ curtype = "Don't care"
elif chunk_type == 0xCAC4:
if data_sz != 4:
print("CRC32 chunk should have 4 bytes of CRC, but this has %u"
- % (data_sz), end="")
- break;
+ % (data_sz))
+ break
else:
crc_bin = FH.read(4)
crc = struct.unpack("<I", crc_bin)
- print("Unverified CRC32 0x%08X" % (crc))
+ curtype = format("Unverified CRC32 0x%08X" % (crc))
else:
- print("Unknown chunk type 0x%04X" % (chunk_type), end="")
- break;
+ print("Unknown chunk type 0x%04X" % (chunk_type))
+ break
- if verbose > 1:
- header = struct.unpack("<12B", header_bin)
- print(" (%02X%02X %02X%02X %02X%02X%02X%02X %02X%02X%02X%02X)"
- % (header[0], header[1], header[2], header[3],
- header[4], header[5], header[6], header[7],
- header[8], header[9], header[10], header[11]))
- else:
- print()
+ if verbose > 0:
+ print("%-18s" % (curtype), end=" ")
+
+ if verbose > 1:
+ header = struct.unpack("<12B", header_bin)
+ print(" (%02X%02X %02X%02X %02X%02X%02X%02X %02X%02X%02X%02X)"
+ % (header[0], header[1], header[2], header[3],
+ header[4], header[5], header[6], header[7],
+ header[8], header[9], header[10], header[11]), end=" ")
+
+ print(curhash)
+
+ if csvfilename:
+ csvwriter.writerow([i, curpos, data_sz, offset, chunk_sz, curtype,
+ curhash])
offset += chunk_sz
- print(" %10u %7u End" % (FH.tell(), offset))
+ if verbose > 0:
+ print(" %10u %7u End" % (FH.tell(), offset))
if total_blks != offset:
print("The header said we should have %u output blocks, but we saw %u"
@@ -163,6 +212,9 @@
print("There were %u bytes of extra data at the end of the file."
% (junk_len))
+ if csvfilename:
+ csvfile.close()
+
sys.exit(0)
if __name__ == "__main__":
diff --git a/libsuspend/Android.bp b/libsuspend/Android.bp
index d27ceea..d442c94 100644
--- a/libsuspend/Android.bp
+++ b/libsuspend/Android.bp
@@ -4,8 +4,6 @@
name: "libsuspend",
srcs: [
"autosuspend.c",
- "autosuspend_autosleep.c",
- "autosuspend_earlysuspend.c",
"autosuspend_wakeup_count.c",
],
export_include_dirs: ["include"],
diff --git a/libsuspend/autosuspend.c b/libsuspend/autosuspend.c
index 64d1bfc..2e1983a 100644
--- a/libsuspend/autosuspend.c
+++ b/libsuspend/autosuspend.c
@@ -34,19 +34,6 @@
return 0;
}
- autosuspend_ops = autosuspend_earlysuspend_init();
- if (autosuspend_ops) {
- goto out;
- }
-
-/* Remove autosleep so userspace can manager suspend/resume and keep stats */
-#if 0
- autosuspend_ops = autosuspend_autosleep_init();
- if (autosuspend_ops) {
- goto out;
- }
-#endif
-
autosuspend_ops = autosuspend_wakeup_count_init();
if (autosuspend_ops) {
goto out;
diff --git a/libsuspend/autosuspend_autosleep.c b/libsuspend/autosuspend_autosleep.c
deleted file mode 100644
index 97109ac..0000000
--- a/libsuspend/autosuspend_autosleep.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright (C) 2012 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#define LOG_TAG "libsuspend"
-
-#include <errno.h>
-#include <fcntl.h>
-#include <stddef.h>
-#include <string.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include <unistd.h>
-
-#include <android/log.h>
-
-#include "autosuspend_ops.h"
-
-#define SYS_POWER_AUTOSLEEP "/sys/power/autosleep"
-
-static int autosleep_fd;
-static const char *sleep_state = "mem";
-static const char *on_state = "off";
-
-static int autosuspend_autosleep_enable(void)
-{
- char buf[80];
- int ret;
-
- ALOGV("autosuspend_autosleep_enable\n");
-
- ret = TEMP_FAILURE_RETRY(write(autosleep_fd, sleep_state, strlen(sleep_state)));
- if (ret < 0) {
- strerror_r(errno, buf, sizeof(buf));
- ALOGE("Error writing to %s: %s\n", SYS_POWER_AUTOSLEEP, buf);
- goto err;
- }
-
- ALOGV("autosuspend_autosleep_enable done\n");
-
- return 0;
-
-err:
- return ret;
-}
-
-static int autosuspend_autosleep_disable(void)
-{
- char buf[80];
- int ret;
-
- ALOGV("autosuspend_autosleep_disable\n");
-
- ret = TEMP_FAILURE_RETRY(write(autosleep_fd, on_state, strlen(on_state)));
- if (ret < 0) {
- strerror_r(errno, buf, sizeof(buf));
- ALOGE("Error writing to %s: %s\n", SYS_POWER_AUTOSLEEP, buf);
- goto err;
- }
-
- ALOGV("autosuspend_autosleep_disable done\n");
-
- return 0;
-
-err:
- return ret;
-}
-
-struct autosuspend_ops autosuspend_autosleep_ops = {
- .enable = autosuspend_autosleep_enable,
- .disable = autosuspend_autosleep_disable,
-};
-
-struct autosuspend_ops *autosuspend_autosleep_init(void)
-{
- char buf[80];
-
- autosleep_fd = TEMP_FAILURE_RETRY(open(SYS_POWER_AUTOSLEEP, O_WRONLY));
- if (autosleep_fd < 0) {
- strerror_r(errno, buf, sizeof(buf));
- ALOGE("Error opening %s: %s\n", SYS_POWER_AUTOSLEEP, buf);
- return NULL;
- }
-
- ALOGI("Selected autosleep\n");
-
- autosuspend_autosleep_disable();
-
- return &autosuspend_autosleep_ops;
-}
diff --git a/libsuspend/autosuspend_earlysuspend.c b/libsuspend/autosuspend_earlysuspend.c
deleted file mode 100644
index 9519e51..0000000
--- a/libsuspend/autosuspend_earlysuspend.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * Copyright (C) 2012 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#define LOG_TAG "libsuspend"
-
-#include <errno.h>
-#include <fcntl.h>
-#include <pthread.h>
-#include <stdbool.h>
-#include <stddef.h>
-#include <string.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include <unistd.h>
-
-#include <android/log.h>
-
-#include "autosuspend_ops.h"
-
-#define EARLYSUSPEND_SYS_POWER_STATE "/sys/power/state"
-#define EARLYSUSPEND_WAIT_FOR_FB_SLEEP "/sys/power/wait_for_fb_sleep"
-#define EARLYSUSPEND_WAIT_FOR_FB_WAKE "/sys/power/wait_for_fb_wake"
-
-static int sPowerStatefd;
-static const char *pwr_state_mem = "mem";
-static const char *pwr_state_on = "on";
-static pthread_t earlysuspend_thread;
-static pthread_mutex_t earlysuspend_mutex = PTHREAD_MUTEX_INITIALIZER;
-static pthread_cond_t earlysuspend_cond = PTHREAD_COND_INITIALIZER;
-static bool wait_for_earlysuspend;
-static enum {
- EARLYSUSPEND_ON,
- EARLYSUSPEND_MEM,
-} earlysuspend_state = EARLYSUSPEND_ON;
-
-int wait_for_fb_wake(void)
-{
- int err = 0;
- char buf;
- int fd = TEMP_FAILURE_RETRY(open(EARLYSUSPEND_WAIT_FOR_FB_WAKE, O_RDONLY, 0));
- // if the file doesn't exist, the error will be caught in read() below
- err = TEMP_FAILURE_RETRY(read(fd, &buf, 1));
- ALOGE_IF(err < 0,
- "*** ANDROID_WAIT_FOR_FB_WAKE failed (%s)", strerror(errno));
- close(fd);
- return err < 0 ? err : 0;
-}
-
-static int wait_for_fb_sleep(void)
-{
- int err = 0;
- char buf;
- int fd = TEMP_FAILURE_RETRY(open(EARLYSUSPEND_WAIT_FOR_FB_SLEEP, O_RDONLY, 0));
- // if the file doesn't exist, the error will be caught in read() below
- err = TEMP_FAILURE_RETRY(read(fd, &buf, 1));
- ALOGE_IF(err < 0,
- "*** ANDROID_WAIT_FOR_FB_SLEEP failed (%s)", strerror(errno));
- close(fd);
- return err < 0 ? err : 0;
-}
-
-static void *earlysuspend_thread_func(void __unused *arg)
-{
- while (1) {
- if (wait_for_fb_sleep()) {
- ALOGE("Failed reading wait_for_fb_sleep, exiting earlysuspend thread\n");
- return NULL;
- }
- pthread_mutex_lock(&earlysuspend_mutex);
- earlysuspend_state = EARLYSUSPEND_MEM;
- pthread_cond_signal(&earlysuspend_cond);
- pthread_mutex_unlock(&earlysuspend_mutex);
-
- if (wait_for_fb_wake()) {
- ALOGE("Failed reading wait_for_fb_wake, exiting earlysuspend thread\n");
- return NULL;
- }
- pthread_mutex_lock(&earlysuspend_mutex);
- earlysuspend_state = EARLYSUSPEND_ON;
- pthread_cond_signal(&earlysuspend_cond);
- pthread_mutex_unlock(&earlysuspend_mutex);
- }
-}
-static int autosuspend_earlysuspend_enable(void)
-{
- char buf[80];
- int ret;
-
- ALOGV("autosuspend_earlysuspend_enable\n");
-
- ret = write(sPowerStatefd, pwr_state_mem, strlen(pwr_state_mem));
- if (ret < 0) {
- strerror_r(errno, buf, sizeof(buf));
- ALOGE("Error writing to %s: %s\n", EARLYSUSPEND_SYS_POWER_STATE, buf);
- goto err;
- }
-
- if (wait_for_earlysuspend) {
- pthread_mutex_lock(&earlysuspend_mutex);
- while (earlysuspend_state != EARLYSUSPEND_MEM) {
- pthread_cond_wait(&earlysuspend_cond, &earlysuspend_mutex);
- }
- pthread_mutex_unlock(&earlysuspend_mutex);
- }
-
- ALOGV("autosuspend_earlysuspend_enable done\n");
-
- return 0;
-
-err:
- return ret;
-}
-
-static int autosuspend_earlysuspend_disable(void)
-{
- char buf[80];
- int ret;
-
- ALOGV("autosuspend_earlysuspend_disable\n");
-
- ret = TEMP_FAILURE_RETRY(write(sPowerStatefd, pwr_state_on, strlen(pwr_state_on)));
- if (ret < 0) {
- strerror_r(errno, buf, sizeof(buf));
- ALOGE("Error writing to %s: %s\n", EARLYSUSPEND_SYS_POWER_STATE, buf);
- goto err;
- }
-
- if (wait_for_earlysuspend) {
- pthread_mutex_lock(&earlysuspend_mutex);
- while (earlysuspend_state != EARLYSUSPEND_ON) {
- pthread_cond_wait(&earlysuspend_cond, &earlysuspend_mutex);
- }
- pthread_mutex_unlock(&earlysuspend_mutex);
- }
-
- ALOGV("autosuspend_earlysuspend_disable done\n");
-
- return 0;
-
-err:
- return ret;
-}
-
-struct autosuspend_ops autosuspend_earlysuspend_ops = {
- .enable = autosuspend_earlysuspend_enable,
- .disable = autosuspend_earlysuspend_disable,
-};
-
-void start_earlysuspend_thread(void)
-{
- char buf[80];
- int ret;
-
- ret = access(EARLYSUSPEND_WAIT_FOR_FB_SLEEP, F_OK);
- if (ret < 0) {
- return;
- }
-
- ret = access(EARLYSUSPEND_WAIT_FOR_FB_WAKE, F_OK);
- if (ret < 0) {
- return;
- }
-
- wait_for_fb_wake();
-
- ALOGI("Starting early suspend unblocker thread\n");
- ret = pthread_create(&earlysuspend_thread, NULL, earlysuspend_thread_func, NULL);
- if (ret) {
- strerror_r(errno, buf, sizeof(buf));
- ALOGE("Error creating thread: %s\n", buf);
- return;
- }
-
- wait_for_earlysuspend = true;
-}
-
-struct autosuspend_ops *autosuspend_earlysuspend_init(void)
-{
- char buf[80];
- int ret;
-
- sPowerStatefd = TEMP_FAILURE_RETRY(open(EARLYSUSPEND_SYS_POWER_STATE, O_RDWR));
-
- if (sPowerStatefd < 0) {
- strerror_r(errno, buf, sizeof(buf));
- ALOGW("Error opening %s: %s\n", EARLYSUSPEND_SYS_POWER_STATE, buf);
- return NULL;
- }
-
- ret = TEMP_FAILURE_RETRY(write(sPowerStatefd, "on", 2));
- if (ret < 0) {
- strerror_r(errno, buf, sizeof(buf));
- ALOGW("Error writing 'on' to %s: %s\n", EARLYSUSPEND_SYS_POWER_STATE, buf);
- goto err_write;
- }
-
- ALOGI("Selected early suspend\n");
-
- start_earlysuspend_thread();
-
- return &autosuspend_earlysuspend_ops;
-
-err_write:
- close(sPowerStatefd);
- return NULL;
-}
diff --git a/libusbhost/include/usbhost/usbhost.h b/libusbhost/include/usbhost/usbhost.h
index 84594c8..a8dd673 100644
--- a/libusbhost/include/usbhost/usbhost.h
+++ b/libusbhost/include/usbhost/usbhost.h
@@ -144,17 +144,17 @@
* usb_device_get_product_name and usb_device_get_serial.
* Call free() to free the result when you are done with it.
*/
-char* usb_device_get_string(struct usb_device *device, int id);
+char* usb_device_get_string(struct usb_device *device, int id, int timeout);
/* Returns the manufacturer name for the USB device.
* Call free() to free the result when you are done with it.
*/
-char* usb_device_get_manufacturer_name(struct usb_device *device);
+char* usb_device_get_manufacturer_name(struct usb_device *device, int timeout);
/* Returns the product name for the USB device.
* Call free() to free the result when you are done with it.
*/
-char* usb_device_get_product_name(struct usb_device *device);
+char* usb_device_get_product_name(struct usb_device *device, int timeout);
/* Returns the version number for the USB device.
*/
@@ -163,7 +163,7 @@
/* Returns the USB serial number for the USB device.
* Call free() to free the result when you are done with it.
*/
-char* usb_device_get_serial(struct usb_device *device);
+char* usb_device_get_serial(struct usb_device *device, int timeout);
/* Returns true if we have write access to the USB device,
* and false if we only have access to the USB device configuration.
@@ -232,10 +232,11 @@
/* Submits a read or write request on the specified device */
int usb_request_queue(struct usb_request *req);
- /* Waits for the results of a previous usb_request_queue operation.
+ /* Waits for the results of a previous usb_request_queue operation. timeoutMillis == -1 requests
+ * to wait forever.
* Returns a usb_request, or NULL for error.
*/
-struct usb_request *usb_request_wait(struct usb_device *dev);
+struct usb_request *usb_request_wait(struct usb_device *dev, int timeoutMillis);
/* Cancels a pending usb_request_queue() operation. */
int usb_request_cancel(struct usb_request *req);
diff --git a/libusbhost/usbhost.c b/libusbhost/usbhost.c
index 68aca17..7adb4f2 100644
--- a/libusbhost/usbhost.c
+++ b/libusbhost/usbhost.c
@@ -14,6 +14,10 @@
* limitations under the License.
*/
+#ifndef _GNU_SOURCE
+#define _GNU_SOURCE
+#endif
+
// #define DEBUG 1
#if DEBUG
@@ -43,6 +47,7 @@
#include <fcntl.h>
#include <errno.h>
#include <ctype.h>
+#include <poll.h>
#include <pthread.h>
#include <linux/usbdevice_fs.h>
@@ -449,7 +454,7 @@
return (struct usb_device_descriptor*)device->desc;
}
-char* usb_device_get_string(struct usb_device *device, int id)
+char* usb_device_get_string(struct usb_device *device, int id, int timeout)
{
char string[256];
__u16 buffer[MAX_STRING_DESCRIPTOR_LENGTH / sizeof(__u16)];
@@ -465,7 +470,8 @@
// read list of supported languages
result = usb_device_control_transfer(device,
USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE, USB_REQ_GET_DESCRIPTOR,
- (USB_DT_STRING << 8) | 0, 0, languages, sizeof(languages), 0);
+ (USB_DT_STRING << 8) | 0, 0, languages, sizeof(languages),
+ timeout);
if (result > 0)
languageCount = (result - 2) / 2;
@@ -474,7 +480,8 @@
result = usb_device_control_transfer(device,
USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE, USB_REQ_GET_DESCRIPTOR,
- (USB_DT_STRING << 8) | id, languages[i], buffer, sizeof(buffer), 0);
+ (USB_DT_STRING << 8) | id, languages[i], buffer, sizeof(buffer),
+ timeout);
if (result > 0) {
int i;
// skip first word, and copy the rest to the string, changing shorts to bytes.
@@ -489,16 +496,16 @@
return NULL;
}
-char* usb_device_get_manufacturer_name(struct usb_device *device)
+char* usb_device_get_manufacturer_name(struct usb_device *device, int timeout)
{
struct usb_device_descriptor *desc = (struct usb_device_descriptor *)device->desc;
- return usb_device_get_string(device, desc->iManufacturer);
+ return usb_device_get_string(device, desc->iManufacturer, timeout);
}
-char* usb_device_get_product_name(struct usb_device *device)
+char* usb_device_get_product_name(struct usb_device *device, int timeout)
{
struct usb_device_descriptor *desc = (struct usb_device_descriptor *)device->desc;
- return usb_device_get_string(device, desc->iProduct);
+ return usb_device_get_string(device, desc->iProduct, timeout);
}
int usb_device_get_version(struct usb_device *device)
@@ -507,10 +514,10 @@
return desc->bcdUSB;
}
-char* usb_device_get_serial(struct usb_device *device)
+char* usb_device_get_serial(struct usb_device *device, int timeout)
{
struct usb_device_descriptor *desc = (struct usb_device_descriptor *)device->desc;
- return usb_device_get_string(device, desc->iSerialNumber);
+ return usb_device_get_string(device, desc->iSerialNumber, timeout);
}
int usb_device_is_writeable(struct usb_device *device)
@@ -681,29 +688,38 @@
return res;
}
-struct usb_request *usb_request_wait(struct usb_device *dev)
+struct usb_request *usb_request_wait(struct usb_device *dev, int timeoutMillis)
{
- struct usbdevfs_urb *urb = NULL;
- struct usb_request *req = NULL;
+ // Poll until a request becomes available if there is a timeout
+ if (timeoutMillis > 0) {
+ struct pollfd p = {.fd = dev->fd, .events = POLLOUT, .revents = 0};
- while (1) {
- int res = ioctl(dev->fd, USBDEVFS_REAPURB, &urb);
- D("USBDEVFS_REAPURB returned %d\n", res);
- if (res < 0) {
- if(errno == EINTR) {
- continue;
- }
- D("[ reap urb - error ]\n");
+ int res = poll(&p, 1, timeoutMillis);
+
+ if (res != 1 || p.revents != POLLOUT) {
+ D("[ poll - event %d, error %d]\n", p.revents, errno);
return NULL;
- } else {
- D("[ urb @%p status = %d, actual = %d ]\n",
- urb, urb->status, urb->actual_length);
- req = (struct usb_request*)urb->usercontext;
- req->actual_length = urb->actual_length;
}
- break;
}
- return req;
+
+ // Read the request. This should usually succeed as we polled before, but it can fail e.g. when
+ // two threads are reading usb requests at the same time and only a single request is available.
+ struct usbdevfs_urb *urb = NULL;
+ int res = TEMP_FAILURE_RETRY(ioctl(dev->fd, timeoutMillis == -1 ? USBDEVFS_REAPURB :
+ USBDEVFS_REAPURBNDELAY, &urb));
+ D("%s returned %d\n", timeoutMillis == -1 ? "USBDEVFS_REAPURB" : "USBDEVFS_REAPURBNDELAY", res);
+
+ if (res < 0) {
+ D("[ reap urb - error %d]\n", errno);
+ return NULL;
+ } else {
+ D("[ urb @%p status = %d, actual = %d ]\n", urb, urb->status, urb->actual_length);
+
+ struct usb_request *req = (struct usb_request*)urb->usercontext;
+ req->actual_length = urb->actual_length;
+
+ return req;
+ }
}
int usb_request_cancel(struct usb_request *req)
@@ -711,4 +727,3 @@
struct usbdevfs_urb *urb = ((struct usbdevfs_urb*)req->private_data);
return ioctl(req->dev->fd, USBDEVFS_DISCARDURB, urb);
}
-
diff --git a/libutils/Looper.cpp b/libutils/Looper.cpp
index 26e27cf..3edc536 100644
--- a/libutils/Looper.cpp
+++ b/libutils/Looper.cpp
@@ -83,6 +83,7 @@
Looper::~Looper() {
close(mWakeEventFd);
+ mWakeEventFd = -1;
if (mEpollFd >= 0) {
close(mEpollFd);
}
@@ -412,7 +413,8 @@
ssize_t nWrite = TEMP_FAILURE_RETRY(write(mWakeEventFd, &inc, sizeof(uint64_t)));
if (nWrite != sizeof(uint64_t)) {
if (errno != EAGAIN) {
- ALOGW("Could not write wake signal: %s", strerror(errno));
+ LOG_ALWAYS_FATAL("Could not write wake signal to fd %d: %s",
+ mWakeEventFd, strerror(errno));
}
}
}
diff --git a/libutils/SharedBuffer.cpp b/libutils/SharedBuffer.cpp
index 269326a..229e3f2 100644
--- a/libutils/SharedBuffer.cpp
+++ b/libutils/SharedBuffer.cpp
@@ -113,16 +113,26 @@
int32_t SharedBuffer::release(uint32_t flags) const
{
- int32_t prev = 1;
- if (onlyOwner()
- || (((prev = mRefs.fetch_sub(1, std::memory_order_release)) == 1)
- && (atomic_thread_fence(std::memory_order_acquire), true))) {
+ const bool useDealloc = ((flags & eKeepStorage) == 0);
+ if (onlyOwner()) {
+ // Since we're the only owner, our reference count goes to zero.
mRefs.store(0, std::memory_order_relaxed);
- if ((flags & eKeepStorage) == 0) {
- free(const_cast<SharedBuffer*>(this));
+ if (useDealloc) {
+ dealloc(this);
+ }
+ // As the only owner, our previous reference count was 1.
+ return 1;
+ }
+ // There's multiple owners, we need to use an atomic decrement.
+ int32_t prevRefCount = mRefs.fetch_sub(1, std::memory_order_release);
+ if (prevRefCount == 1) {
+ // We're the last reference, we need the acquire fence.
+ atomic_thread_fence(std::memory_order_acquire);
+ if (useDealloc) {
+ dealloc(this);
}
}
- return prev;
+ return prevRefCount;
}
diff --git a/libziparchive/testdata/bad_filename.zip b/libziparchive/testdata/bad_filename.zip
new file mode 100644
index 0000000..294eaf5
--- /dev/null
+++ b/libziparchive/testdata/bad_filename.zip
Binary files differ
diff --git a/libziparchive/testdata/crash.apk b/libziparchive/testdata/crash.apk
new file mode 100644
index 0000000..d6dd52d
--- /dev/null
+++ b/libziparchive/testdata/crash.apk
Binary files differ
diff --git a/libziparchive/zip_archive.cc b/libziparchive/zip_archive.cc
index 0ac6f2c..c2055b7 100644
--- a/libziparchive/zip_archive.cc
+++ b/libziparchive/zip_archive.cc
@@ -373,6 +373,11 @@
archive->hash_table_size = RoundUpPower2(1 + (num_entries * 4) / 3);
archive->hash_table = reinterpret_cast<ZipString*>(calloc(archive->hash_table_size,
sizeof(ZipString)));
+ if (archive->hash_table == nullptr) {
+ ALOGW("Zip: unable to allocate the %u-entry hash_table, entry size: %zu",
+ archive->hash_table_size, sizeof(ZipString));
+ return -1;
+ }
/*
* Walk through the central directory, adding entries to the hash
@@ -405,6 +410,11 @@
const uint16_t comment_length = cdr->comment_length;
const uint8_t* file_name = ptr + sizeof(CentralDirectoryRecord);
+ if (file_name + file_name_length > cd_end) {
+ ALOGW("Zip: file name boundary exceeds the central directory range, file_name_length: "
+ "%" PRIx16 ", cd_length: %zu", file_name_length, cd_length);
+ return -1;
+ }
/* check that file name is valid UTF-8 and doesn't contain NUL (U+0000) characters */
if (!IsValidEntryName(file_name, file_name_length)) {
return -1;
diff --git a/libziparchive/zip_archive_test.cc b/libziparchive/zip_archive_test.cc
index 9dd6cc0..493a0ce 100644
--- a/libziparchive/zip_archive_test.cc
+++ b/libziparchive/zip_archive_test.cc
@@ -38,6 +38,8 @@
static const std::string kValidZip = "valid.zip";
static const std::string kLargeZip = "large.zip";
static const std::string kBadCrcZip = "bad_crc.zip";
+static const std::string kCrashApk = "crash.apk";
+static const std::string kBadFilenameZip = "bad_filename.zip";
static const std::string kUpdateZip = "dummy-update.zip";
static const std::vector<uint8_t> kATxtContents {
@@ -83,7 +85,15 @@
TEST(ziparchive, Open) {
ZipArchiveHandle handle;
ASSERT_EQ(0, OpenArchiveWrapper(kValidZip, &handle));
+ CloseArchive(handle);
+ ASSERT_EQ(-1, OpenArchiveWrapper(kBadFilenameZip, &handle));
+ CloseArchive(handle);
+}
+
+TEST(ziparchive, OutOfBound) {
+ ZipArchiveHandle handle;
+ ASSERT_EQ(-8, OpenArchiveWrapper(kCrashApk, &handle));
CloseArchive(handle);
}
diff --git a/rootdir/init.rc b/rootdir/init.rc
index ef3c8f9..2f69b42 100644
--- a/rootdir/init.rc
+++ b/rootdir/init.rc
@@ -302,7 +302,8 @@
# Mount shared so changes propagate into child namespaces
mount rootfs rootfs / shared rec
# Mount default storage into root namespace
- mount none /mnt/runtime/default /storage slave bind rec
+ mount none /mnt/runtime/default /storage bind rec
+ mount none none /storage slave rec
# Make sure /sys/kernel/debug (if present) is labeled properly
restorecon_recursive /sys/kernel/debug
@@ -649,10 +650,9 @@
critical
seclabel u:r:ueventd:s0
-service healthd /sbin/healthd
+service healthd /system/bin/healthd
class core
critical
- seclabel u:r:healthd:s0
group root system wakelock
service console /system/bin/sh
diff --git a/sdcard/fuse.cpp b/sdcard/fuse.cpp
index 4f1ca0d..28b191a 100644
--- a/sdcard/fuse.cpp
+++ b/sdcard/fuse.cpp
@@ -997,7 +997,7 @@
{
struct node* node;
char path[PATH_MAX];
- struct fuse_open_out out;
+ struct fuse_open_out out = {};
struct handle *h;
pthread_mutex_lock(&fuse->global->lock);
@@ -1026,13 +1026,6 @@
}
out.fh = ptr_to_id(h);
out.open_flags = 0;
-
-#ifdef FUSE_SHORTCIRCUIT
- out.lower_fd = h->fd;
-#else
- out.padding = 0;
-#endif
-
fuse_reply(fuse, hdr->unique, &out, sizeof(out));
return NO_STATUS;
}
@@ -1169,7 +1162,7 @@
{
struct node* node;
char path[PATH_MAX];
- struct fuse_open_out out;
+ struct fuse_open_out out = {};
struct dirhandle *h;
pthread_mutex_lock(&fuse->global->lock);
@@ -1196,13 +1189,6 @@
}
out.fh = ptr_to_id(h);
out.open_flags = 0;
-
-#ifdef FUSE_SHORTCIRCUIT
- out.lower_fd = -1;
-#else
- out.padding = 0;
-#endif
-
fuse_reply(fuse, hdr->unique, &out, sizeof(out));
return NO_STATUS;
}
@@ -1285,11 +1271,6 @@
out.major = FUSE_KERNEL_VERSION;
out.max_readahead = req->max_readahead;
out.flags = FUSE_ATOMIC_O_TRUNC | FUSE_BIG_WRITES;
-
-#ifdef FUSE_SHORTCIRCUIT
- out.flags |= FUSE_SHORTCIRCUIT;
-#endif
-
out.max_background = 32;
out.congestion_threshold = 32;
out.max_write = MAX_WRITE;