Merge "port metrics_logger to v2 format" am: 75a8233c7e am: d28d543c48 am: 43bae3f568
am: ef50840197
Change-Id: I18bd0a369a10ef59c406cef5aeb1e28c959f02a4
diff --git a/adb/Android.mk b/adb/Android.mk
index 382c8cb..4d7d487 100644
--- a/adb/Android.mk
+++ b/adb/Android.mk
@@ -135,7 +135,7 @@
# Even though we're building a static library (and thus there's no link step for
# this to take effect), this adds the includes to our path.
-LOCAL_STATIC_LIBRARIES := libcrypto_utils libcrypto libbase
+LOCAL_STATIC_LIBRARIES := libcrypto_utils libcrypto libqemu_pipe libbase
LOCAL_WHOLE_STATIC_LIBRARIES := libadbd_usb
@@ -369,6 +369,7 @@
libadbd \
libavb_user \
libbase \
+ libqemu_pipe \
libbootloader_message \
libfs_mgr \
libfec \
diff --git a/adb/transport_local.cpp b/adb/transport_local.cpp
index 3ee286a..e5992b1 100644
--- a/adb/transport_local.cpp
+++ b/adb/transport_local.cpp
@@ -288,7 +288,7 @@
#define open adb_open
#define read adb_read
#define write adb_write
-#include <system/qemu_pipe.h>
+#include <qemu_pipe.h>
#undef open
#undef read
#undef write
diff --git a/fs_mgr/fs_mgr.cpp b/fs_mgr/fs_mgr.cpp
index df3c300..94733c4 100644
--- a/fs_mgr/fs_mgr.cpp
+++ b/fs_mgr/fs_mgr.cpp
@@ -721,6 +721,12 @@
return false;
}
+static bool should_use_metadata_encryption(const struct fstab_rec* rec) {
+ if (!(rec->fs_mgr_flags & (MF_FILEENCRYPTION | MF_FORCEFDEORFBE))) return false;
+ if (!(rec->fs_mgr_flags & MF_KEYDIRECTORY)) return false;
+ return true;
+}
+
// Check to see if a mountable volume has encryption requirements
static int handle_encryptable(const struct fstab_rec* rec)
{
@@ -733,8 +739,14 @@
<< " - allow continue unencrypted";
return FS_MGR_MNTALL_DEV_NOT_ENCRYPTED;
}
+ } else if (should_use_metadata_encryption(rec)) {
+ if (umount(rec->mount_point) == 0) {
+ return FS_MGR_MNTALL_DEV_NEEDS_METADATA_ENCRYPTION;
+ } else {
+ PERROR << "Could not umount " << rec->mount_point << " - fail since can't encrypt";
+ return FS_MGR_MNTALL_FAIL;
+ }
} else if (rec->fs_mgr_flags & (MF_FILEENCRYPTION | MF_FORCEFDEORFBE)) {
- // Deal with file level encryption
LINFO << rec->mount_point << " is file encrypted";
return FS_MGR_MNTALL_DEV_FILE_ENCRYPTED;
} else if (fs_mgr_is_encryptable(rec)) {
@@ -883,7 +895,6 @@
continue;
}
- /* mount(2) returned an error, handle the encryptable/formattable case */
bool wiped = partition_wiped(fstab->recs[top_idx].blk_device);
bool crypt_footer = false;
if (mret && mount_errno != EBUSY && mount_errno != EACCES &&
@@ -923,6 +934,8 @@
continue;
}
}
+
+ /* mount(2) returned an error, handle the encryptable/formattable case */
if (mret && mount_errno != EBUSY && mount_errno != EACCES &&
fs_mgr_is_encryptable(&fstab->recs[attempted_idx])) {
if (wiped) {
@@ -948,6 +961,9 @@
}
}
encryptable = FS_MGR_MNTALL_DEV_MIGHT_BE_ENCRYPTED;
+ } else if (mret && mount_errno != EBUSY && mount_errno != EACCES &&
+ should_use_metadata_encryption(&fstab->recs[attempted_idx])) {
+ encryptable = FS_MGR_MNTALL_DEV_IS_METADATA_ENCRYPTED;
} else {
if (fs_mgr_is_nofail(&fstab->recs[attempted_idx])) {
PERROR << "Ignoring failure to mount an un-encryptable or wiped partition on"
@@ -1230,48 +1246,46 @@
return ret;
}
-/*
- * key_loc must be at least PROPERTY_VALUE_MAX bytes long
- *
- * real_blk_device must be at least PROPERTY_VALUE_MAX bytes long
- */
-int fs_mgr_get_crypt_info(struct fstab *fstab, char *key_loc, char *real_blk_device, int size)
-{
- int i = 0;
+struct fstab_rec const* fs_mgr_get_crypt_entry(struct fstab const* fstab) {
+ int i;
if (!fstab) {
- return -1;
- }
- /* Initialize return values to null strings */
- if (key_loc) {
- *key_loc = '\0';
- }
- if (real_blk_device) {
- *real_blk_device = '\0';
+ return NULL;
}
/* Look for the encryptable partition to find the data */
for (i = 0; i < fstab->num_entries; i++) {
/* Don't deal with vold managed enryptable partitions here */
- if (fstab->recs[i].fs_mgr_flags & MF_VOLDMANAGED) {
- continue;
+ if (!(fstab->recs[i].fs_mgr_flags & MF_VOLDMANAGED) &&
+ (fstab->recs[i].fs_mgr_flags &
+ (MF_CRYPT | MF_FORCECRYPT | MF_FORCEFDEORFBE | MF_FILEENCRYPTION))) {
+ return &fstab->recs[i];
}
- if (!(fstab->recs[i].fs_mgr_flags
- & (MF_CRYPT | MF_FORCECRYPT | MF_FORCEFDEORFBE))) {
- continue;
- }
-
- /* We found a match */
- if (key_loc) {
- strlcpy(key_loc, fstab->recs[i].key_loc, size);
- }
- if (real_blk_device) {
- strlcpy(real_blk_device, fstab->recs[i].blk_device, size);
- }
- break;
}
+ return NULL;
+}
- return 0;
+/*
+ * key_loc must be at least PROPERTY_VALUE_MAX bytes long
+ *
+ * real_blk_device must be at least PROPERTY_VALUE_MAX bytes long
+ */
+void fs_mgr_get_crypt_info(struct fstab* fstab, char* key_loc, char* real_blk_device, size_t size) {
+ struct fstab_rec const* rec = fs_mgr_get_crypt_entry(fstab);
+ if (key_loc) {
+ if (rec) {
+ strlcpy(key_loc, rec->key_loc, size);
+ } else {
+ *key_loc = '\0';
+ }
+ }
+ if (real_blk_device) {
+ if (rec) {
+ strlcpy(real_blk_device, rec->blk_device, size);
+ } else {
+ *real_blk_device = '\0';
+ }
+ }
}
bool fs_mgr_load_verity_state(int* mode) {
diff --git a/fs_mgr/fs_mgr_fstab.cpp b/fs_mgr/fs_mgr_fstab.cpp
index 0a694c1..e43eb7a 100644
--- a/fs_mgr/fs_mgr_fstab.cpp
+++ b/fs_mgr/fs_mgr_fstab.cpp
@@ -31,6 +31,7 @@
struct fs_mgr_flag_values {
char *key_loc;
+ char* key_dir;
char *verity_loc;
long long part_length;
char *label;
@@ -70,34 +71,35 @@
};
static struct flag_list fs_mgr_flags[] = {
- { "wait", MF_WAIT },
- { "check", MF_CHECK },
- { "encryptable=", MF_CRYPT },
- { "forceencrypt=", MF_FORCECRYPT },
- { "fileencryption=", MF_FILEENCRYPTION },
- { "forcefdeorfbe=", MF_FORCEFDEORFBE },
- { "nonremovable", MF_NONREMOVABLE },
- { "voldmanaged=", MF_VOLDMANAGED},
- { "length=", MF_LENGTH },
- { "recoveryonly", MF_RECOVERYONLY },
- { "swapprio=", MF_SWAPPRIO },
- { "zramsize=", MF_ZRAMSIZE },
- { "max_comp_streams=", MF_MAX_COMP_STREAMS },
- { "verifyatboot", MF_VERIFYATBOOT },
- { "verify", MF_VERIFY },
- { "avb", MF_AVB },
- { "noemulatedsd", MF_NOEMULATEDSD },
- { "notrim", MF_NOTRIM },
- { "formattable", MF_FORMATTABLE },
- { "slotselect", MF_SLOTSELECT },
- { "nofail", MF_NOFAIL },
- { "latemount", MF_LATEMOUNT },
- { "reservedsize=", MF_RESERVEDSIZE },
- { "quota", MF_QUOTA },
- { "eraseblk=", MF_ERASEBLKSIZE },
- { "logicalblk=", MF_LOGICALBLKSIZE },
- { "defaults", 0 },
- { 0, 0 },
+ {"wait", MF_WAIT},
+ {"check", MF_CHECK},
+ {"encryptable=", MF_CRYPT},
+ {"forceencrypt=", MF_FORCECRYPT},
+ {"fileencryption=", MF_FILEENCRYPTION},
+ {"forcefdeorfbe=", MF_FORCEFDEORFBE},
+ {"keydirectory=", MF_KEYDIRECTORY},
+ {"nonremovable", MF_NONREMOVABLE},
+ {"voldmanaged=", MF_VOLDMANAGED},
+ {"length=", MF_LENGTH},
+ {"recoveryonly", MF_RECOVERYONLY},
+ {"swapprio=", MF_SWAPPRIO},
+ {"zramsize=", MF_ZRAMSIZE},
+ {"max_comp_streams=", MF_MAX_COMP_STREAMS},
+ {"verifyatboot", MF_VERIFYATBOOT},
+ {"verify", MF_VERIFY},
+ {"avb", MF_AVB},
+ {"noemulatedsd", MF_NOEMULATEDSD},
+ {"notrim", MF_NOTRIM},
+ {"formattable", MF_FORMATTABLE},
+ {"slotselect", MF_SLOTSELECT},
+ {"nofail", MF_NOFAIL},
+ {"latemount", MF_LATEMOUNT},
+ {"reservedsize=", MF_RESERVEDSIZE},
+ {"quota", MF_QUOTA},
+ {"eraseblk=", MF_ERASEBLKSIZE},
+ {"logicalblk=", MF_LOGICALBLKSIZE},
+ {"defaults", 0},
+ {0, 0},
};
#define EM_AES_256_XTS 1
@@ -266,6 +268,11 @@
} else {
flag_vals->file_names_mode = EM_AES_256_CTS;
}
+ } else if ((fl[i].flag == MF_KEYDIRECTORY) && flag_vals) {
+ /* The metadata flag is followed by an = and the
+ * directory for the keys. Get it and return it.
+ */
+ flag_vals->key_dir = strdup(strchr(p, '=') + 1);
} else if ((fl[i].flag == MF_LENGTH) && flag_vals) {
/* The length flag is followed by an = and the
* size of the partition. Get it and return it.
@@ -557,6 +564,7 @@
fstab->recs[cnt].fs_mgr_flags = parse_flags(p, fs_mgr_flags,
&flag_vals, NULL, 0);
fstab->recs[cnt].key_loc = flag_vals.key_loc;
+ fstab->recs[cnt].key_dir = flag_vals.key_dir;
fstab->recs[cnt].verity_loc = flag_vals.verity_loc;
fstab->recs[cnt].length = flag_vals.part_length;
fstab->recs[cnt].label = flag_vals.label;
@@ -716,6 +724,7 @@
free(fstab->recs[i].fs_type);
free(fstab->recs[i].fs_options);
free(fstab->recs[i].key_loc);
+ free(fstab->recs[i].key_dir);
free(fstab->recs[i].label);
}
diff --git a/fs_mgr/fs_mgr_priv.h b/fs_mgr/fs_mgr_priv.h
index c985462..3ca507b 100644
--- a/fs_mgr/fs_mgr_priv.h
+++ b/fs_mgr/fs_mgr_priv.h
@@ -107,6 +107,7 @@
#define MF_ERASEBLKSIZE 0x800000
#define MF_LOGICALBLKSIZE 0X1000000
#define MF_AVB 0X2000000
+#define MF_KEYDIRECTORY 0X4000000
#define DM_BUF_SIZE 4096
diff --git a/fs_mgr/include/fs_mgr.h b/fs_mgr/include/fs_mgr.h
index ae8018a..02a22db 100644
--- a/fs_mgr/include/fs_mgr.h
+++ b/fs_mgr/include/fs_mgr.h
@@ -72,6 +72,7 @@
char *fs_options;
int fs_mgr_flags;
char *key_loc;
+ char* key_dir;
char *verity_loc;
long long length;
char *label;
@@ -95,6 +96,8 @@
struct fstab *fs_mgr_read_fstab(const char *fstab_path);
void fs_mgr_free_fstab(struct fstab *fstab);
+#define FS_MGR_MNTALL_DEV_IS_METADATA_ENCRYPTED 7
+#define FS_MGR_MNTALL_DEV_NEEDS_METADATA_ENCRYPTION 6
#define FS_MGR_MNTALL_DEV_FILE_ENCRYPTED 5
#define FS_MGR_MNTALL_DEV_NEEDS_RECOVERY 4
#define FS_MGR_MNTALL_DEV_NEEDS_ENCRYPTION 3
@@ -113,8 +116,8 @@
int fs_mgr_do_mount_one(struct fstab_rec *rec);
int fs_mgr_do_tmpfs_mount(const char *n_name);
int fs_mgr_unmount_all(struct fstab *fstab);
-int fs_mgr_get_crypt_info(struct fstab *fstab, char *key_loc,
- char *real_blk_device, int size);
+struct fstab_rec const* fs_mgr_get_crypt_entry(struct fstab const* fstab);
+void fs_mgr_get_crypt_info(struct fstab* fstab, char* key_loc, char* real_blk_device, size_t size);
bool fs_mgr_load_verity_state(int* mode);
bool fs_mgr_update_verity_state(fs_mgr_verity_state_callback callback);
int fs_mgr_add_entry(struct fstab *fstab,
diff --git a/init/Android.mk b/init/Android.mk
index 0db65cb..617a809 100644
--- a/init/Android.mk
+++ b/init/Android.mk
@@ -147,6 +147,7 @@
# b/38002385, work around clang-tidy segmentation fault.
LOCAL_TIDY_CHECKS := -misc-forwarding-reference-overload
LOCAL_MODULE := init_tests
+LOCAL_COMPATIBILITY_SUITE := device-tests
LOCAL_SRC_FILES := \
devices_test.cpp \
init_parser_test.cpp \
diff --git a/init/AndroidTest.xml b/init/AndroidTest.xml
new file mode 100644
index 0000000..3de69ed
--- /dev/null
+++ b/init/AndroidTest.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2017 The Android Open Source Project
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<configuration description="Config for init_tests">
+ <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+ <option name="cleanup" value="true" />
+ <option name="push" value="init_tests->/data/local/tmp/init_tests" />
+ </target_preparer>
+ <option name="test-suite-tag" value="apct" />
+ <test class="com.android.tradefed.testtype.GTest" >
+ <option name="native-test-device-path" value="/data/local/tmp" />
+ <option name="module-name" value="init_tests" />
+ </test>
+</configuration>
diff --git a/init/builtins.cpp b/init/builtins.cpp
index 1eacb36..bdd86ed 100644
--- a/init/builtins.cpp
+++ b/init/builtins.cpp
@@ -499,6 +499,23 @@
// Although encrypted, we have device key, so we do not need to
// do anything different from the nonencrypted case.
ActionManager::GetInstance().QueueEventTrigger("nonencrypted");
+ } else if (code == FS_MGR_MNTALL_DEV_IS_METADATA_ENCRYPTED) {
+ if (e4crypt_install_keyring()) {
+ return -1;
+ }
+ property_set("ro.crypto.state", "encrypted");
+ property_set("ro.crypto.type", "file");
+
+ // defaultcrypto detects file/block encryption. init flow is same for each.
+ ActionManager::GetInstance().QueueEventTrigger("defaultcrypto");
+ } else if (code == FS_MGR_MNTALL_DEV_NEEDS_METADATA_ENCRYPTION) {
+ if (e4crypt_install_keyring()) {
+ return -1;
+ }
+ property_set("ro.crypto.type", "file");
+
+ // encrypt detects file/block encryption. init flow is same for each.
+ ActionManager::GetInstance().QueueEventTrigger("encrypt");
} else if (code > 0) {
PLOG(ERROR) << "fs_mgr_mount_all returned unexpected error " << code;
}
diff --git a/libcutils/include/cutils/native_handle.h b/libcutils/include/cutils/native_handle.h
index 7d6a988..abe6dd6 100644
--- a/libcutils/include/cutils/native_handle.h
+++ b/libcutils/include/cutils/native_handle.h
@@ -43,6 +43,8 @@
#endif
} native_handle_t;
+typedef const native_handle_t* buffer_handle_t;
+
/*
* native_handle_close
*
diff --git a/libcutils/include/cutils/sched_policy.h b/libcutils/include/cutils/sched_policy.h
index 15391d9..9683f91 100644
--- a/libcutils/include/cutils/sched_policy.h
+++ b/libcutils/include/cutils/sched_policy.h
@@ -47,6 +47,7 @@
SP_AUDIO_APP = 3,
SP_AUDIO_SYS = 4,
SP_TOP_APP = 5,
+ SP_RT_APP = 6,
SP_CNT,
SP_MAX = SP_CNT - 1,
SP_SYSTEM_DEFAULT = SP_FOREGROUND,
diff --git a/libcutils/sched_policy.cpp b/libcutils/sched_policy.cpp
index e29a844..7170b48 100644
--- a/libcutils/sched_policy.cpp
+++ b/libcutils/sched_policy.cpp
@@ -70,6 +70,7 @@
static int bg_schedboost_fd = -1;
static int fg_schedboost_fd = -1;
static int ta_schedboost_fd = -1;
+static int rt_schedboost_fd = -1;
/* Add tid to the scheduling group defined by the policy */
static int add_tid_to_cgroup(int tid, int fd)
@@ -173,6 +174,8 @@
fg_schedboost_fd = open(filename, O_WRONLY | O_CLOEXEC);
filename = "/dev/stune/background/tasks";
bg_schedboost_fd = open(filename, O_WRONLY | O_CLOEXEC);
+ filename = "/dev/stune/rt/tasks";
+ rt_schedboost_fd = open(filename, O_WRONLY | O_CLOEXEC);
}
}
}
@@ -408,6 +411,9 @@
case SP_SYSTEM:
SLOGD("/// tid %d (%s)", tid, thread_name);
break;
+ case SP_RT_APP:
+ SLOGD("RT tid %d (%s)", tid, thread_name);
+ break;
default:
SLOGD("??? tid %d (%s)", tid, thread_name);
break;
@@ -428,6 +434,9 @@
case SP_TOP_APP:
boost_fd = ta_schedboost_fd;
break;
+ case SP_RT_APP:
+ boost_fd = rt_schedboost_fd;
+ break;
default:
boost_fd = -1;
break;
@@ -472,6 +481,7 @@
[SP_AUDIO_APP] = "aa",
[SP_AUDIO_SYS] = "as",
[SP_TOP_APP] = "ta",
+ [SP_RT_APP] = "rt",
};
if ((policy < SP_CNT) && (strings[policy] != NULL))
return strings[policy];
diff --git a/libgrallocusage/Android.bp b/libgrallocusage/Android.bp
index 54bfee5..cf03868 100644
--- a/libgrallocusage/Android.bp
+++ b/libgrallocusage/Android.bp
@@ -14,6 +14,7 @@
cc_library_static {
name: "libgrallocusage",
+ vendor_available: true,
cppflags: [
"-Weverything",
"-Werror",
@@ -26,4 +27,5 @@
srcs: ["GrallocUsageConversion.cpp"],
export_include_dirs: ["include"],
shared_libs: ["android.hardware.graphics.allocator@2.0"],
+ header_libs: ["libhardware_headers"],
}
diff --git a/libsuspend/autosuspend_wakeup_count.c b/libsuspend/autosuspend_wakeup_count.c
index 4dedf7f..2da204a 100644
--- a/libsuspend/autosuspend_wakeup_count.c
+++ b/libsuspend/autosuspend_wakeup_count.c
@@ -24,6 +24,7 @@
#include <stddef.h>
#include <stdbool.h>
#include <string.h>
+#include <sys/param.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <unistd.h>
@@ -35,12 +36,24 @@
#define SYS_POWER_STATE "/sys/power/state"
#define SYS_POWER_WAKEUP_COUNT "/sys/power/wakeup_count"
+#define BASE_SLEEP_TIME 100000
+
static int state_fd;
static int wakeup_count_fd;
static pthread_t suspend_thread;
static sem_t suspend_lockout;
static const char *sleep_state = "mem";
static void (*wakeup_func)(bool success) = NULL;
+static int sleep_time = BASE_SLEEP_TIME;
+
+static void update_sleep_time(bool success) {
+ if (success) {
+ sleep_time = BASE_SLEEP_TIME;
+ return;
+ }
+ // double sleep time after each failure up to one minute
+ sleep_time = MIN(sleep_time * 2, 60000000);
+}
static void *suspend_thread_func(void *arg __attribute__((unused)))
{
@@ -48,10 +61,12 @@
char wakeup_count[20];
int wakeup_count_len;
int ret;
- bool success;
+ bool success = true;
while (1) {
- usleep(100000);
+ update_sleep_time(success);
+ usleep(sleep_time);
+ success = false;
ALOGV("%s: read wakeup_count\n", __func__);
lseek(wakeup_count_fd, 0, SEEK_SET);
wakeup_count_len = TEMP_FAILURE_RETRY(read(wakeup_count_fd, wakeup_count,
@@ -75,7 +90,6 @@
continue;
}
- success = true;
ALOGV("%s: write %*s to wakeup_count\n", __func__, wakeup_count_len, wakeup_count);
ret = TEMP_FAILURE_RETRY(write(wakeup_count_fd, wakeup_count, wakeup_count_len));
if (ret < 0) {
@@ -84,8 +98,8 @@
} else {
ALOGV("%s: write %s to %s\n", __func__, sleep_state, SYS_POWER_STATE);
ret = TEMP_FAILURE_RETRY(write(state_fd, sleep_state, strlen(sleep_state)));
- if (ret < 0) {
- success = false;
+ if (ret >= 0) {
+ success = true;
}
void (*func)(bool success) = wakeup_func;
if (func != NULL) {
diff --git a/libsystem/include/system/qemu_pipe.h b/libsystem/include/system/qemu_pipe.h
deleted file mode 100644
index af25079..0000000
--- a/libsystem/include/system/qemu_pipe.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Copyright (C) 2011 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef ANDROID_INCLUDE_SYSTEM_QEMU_PIPE_H
-#define ANDROID_INCLUDE_SYSTEM_QEMU_PIPE_H
-
-#include <unistd.h>
-#include <fcntl.h>
-#include <string.h>
-#include <errno.h>
-
-// Define QEMU_PIPE_DEBUG if you want to print error messages when an error
-// occurs during pipe operations. The macro should simply take a printf-style
-// formatting string followed by optional arguments.
-#ifndef QEMU_PIPE_DEBUG
-# define QEMU_PIPE_DEBUG(...) (void)0
-#endif
-
-// Try to open a new Qemu fast-pipe. This function returns a file descriptor
-// that can be used to communicate with a named service managed by the
-// emulator.
-//
-// This file descriptor can be used as a standard pipe/socket descriptor.
-//
-// 'pipeName' is the name of the emulator service you want to connect to,
-// and must begin with 'pipe:' (e.g. 'pipe:camera' or 'pipe:opengles').
-//
-// On success, return a valid file descriptor, or -1/errno on failure. E.g.:
-//
-// EINVAL -> unknown/unsupported pipeName
-// ENOSYS -> fast pipes not available in this system.
-//
-// ENOSYS should never happen, except if you're trying to run within a
-// misconfigured emulator.
-//
-// You should be able to open several pipes to the same pipe service,
-// except for a few special cases (e.g. GSM modem), where EBUSY will be
-// returned if more than one client tries to connect to it.
-static __inline__ int qemu_pipe_open(const char* pipeName) {
- // Sanity check.
- if (!pipeName || memcmp(pipeName, "pipe:", 5) != 0) {
- errno = EINVAL;
- return -1;
- }
-
- int fd = TEMP_FAILURE_RETRY(open("/dev/qemu_pipe", O_RDWR));
- if (fd < 0) {
- QEMU_PIPE_DEBUG("%s: Could not open /dev/qemu_pipe: %s", __FUNCTION__,
- strerror(errno));
- return -1;
- }
-
- // Write the pipe name, *including* the trailing zero which is necessary.
- size_t pipeNameLen = strlen(pipeName);
- ssize_t ret = TEMP_FAILURE_RETRY(write(fd, pipeName, pipeNameLen + 1U));
- if (ret != (ssize_t)pipeNameLen + 1) {
- QEMU_PIPE_DEBUG("%s: Could not connect to %s pipe service: %s",
- __FUNCTION__, pipeName, strerror(errno));
- if (ret == 0) {
- errno = ECONNRESET;
- } else if (ret > 0) {
- errno = EINVAL;
- }
- return -1;
- }
- return fd;
-}
-
-// Send a framed message |buff| of |len| bytes through the |fd| descriptor.
-// This really adds a 4-hexchar prefix describing the payload size.
-// Returns 0 on success, and -1 on error.
-static int __inline__ qemu_pipe_frame_send(int fd,
- const void* buff,
- size_t len) {
- char header[5];
- snprintf(header, sizeof(header), "%04zx", len);
- ssize_t ret = TEMP_FAILURE_RETRY(write(fd, header, 4));
- if (ret != 4) {
- QEMU_PIPE_DEBUG("Can't write qemud frame header: %s", strerror(errno));
- return -1;
- }
- ret = TEMP_FAILURE_RETRY(write(fd, buff, len));
- if (ret != (ssize_t)len) {
- QEMU_PIPE_DEBUG("Can't write qemud frame payload: %s", strerror(errno));
- return -1;
- }
- return 0;
-}
-
-// Read a frame message from |fd|, and store it into |buff| of |len| bytes.
-// If the framed message is larger than |len|, then this returns -1 and the
-// content is lost. Otherwise, this returns the size of the message. NOTE:
-// empty messages are possible in a framed wire protocol and do not mean
-// end-of-stream.
-static int __inline__ qemu_pipe_frame_recv(int fd, void* buff, size_t len) {
- char header[5];
- ssize_t ret = TEMP_FAILURE_RETRY(read(fd, header, 4));
- if (ret != 4) {
- QEMU_PIPE_DEBUG("Can't read qemud frame header: %s", strerror(errno));
- return -1;
- }
- header[4] = '\0';
- size_t size;
- if (sscanf(header, "%04zx", &size) != 1) {
- QEMU_PIPE_DEBUG("Malformed qemud frame header: [%.*s]", 4, header);
- return -1;
- }
- if (size > len) {
- QEMU_PIPE_DEBUG("Oversized qemud frame (% bytes, expected <= %)", size,
- len);
- return -1;
- }
- ret = TEMP_FAILURE_RETRY(read(fd, buff, size));
- if (ret != (ssize_t)size) {
- QEMU_PIPE_DEBUG("Could not read qemud frame payload: %s",
- strerror(errno));
- return -1;
- }
- return size;
-}
-
-#endif /* ANDROID_INCLUDE_HARDWARE_QEMUD_PIPE_H */
diff --git a/libsystem/include/system/window-deprecated.h b/libsystem/include/system/window-deprecated.h
deleted file mode 100644
index e836aea..0000000
--- a/libsystem/include/system/window-deprecated.h
+++ /dev/null
@@ -1,1114 +0,0 @@
-/*
- * Copyright (C) 2011 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/**************************************************************************************************
- **************************************************************************************************
- **** ****
- **** DEPRECATED ****
- **** ****
- **** THIS FILE EXISTS ONLY FOR BACKWARD SOURCE COMPATIBILITY. ****
- **** ****
- **** DO NOT ADD TO THIS FILE. ****
- **** ****
- **** Driver implementors (vendors) should use vndk/window.h ****
- **** (frameworks/native/libs/nativewindow/include/vndk/window.h) ****
- **** ****
- **** Internal definition can be found here: ****
- **** frameworks/native/libs/nativewindow/include/system/window.h ****
- **** ****
- **************************************************************************************************
- **************************************************************************************************/
-
-#pragma once
-
-#include <cutils/native_handle.h>
-#include <errno.h>
-#include <limits.h>
-#include <stdint.h>
-#include <string.h>
-#include <sys/cdefs.h>
-#include <system/graphics.h>
-#include <unistd.h>
-#include <stdbool.h>
-
-#ifndef __UNUSED
-#define __UNUSED __attribute__((__unused__))
-#endif
-#ifndef __deprecated
-#define __deprecated __attribute__((__deprecated__))
-#endif
-
-__BEGIN_DECLS
-
-/*****************************************************************************/
-
-#ifdef __cplusplus
-#define ANDROID_NATIVE_UNSIGNED_CAST(x) static_cast<unsigned int>(x)
-#else
-#define ANDROID_NATIVE_UNSIGNED_CAST(x) ((unsigned int)(x))
-#endif
-
-#define ANDROID_NATIVE_MAKE_CONSTANT(a,b,c,d) \
- ((ANDROID_NATIVE_UNSIGNED_CAST(a) << 24) | \
- (ANDROID_NATIVE_UNSIGNED_CAST(b) << 16) | \
- (ANDROID_NATIVE_UNSIGNED_CAST(c) << 8) | \
- (ANDROID_NATIVE_UNSIGNED_CAST(d)))
-
-#define ANDROID_NATIVE_WINDOW_MAGIC \
- ANDROID_NATIVE_MAKE_CONSTANT('_','w','n','d')
-
-#define ANDROID_NATIVE_BUFFER_MAGIC \
- ANDROID_NATIVE_MAKE_CONSTANT('_','b','f','r')
-
-// ---------------------------------------------------------------------------
-
-// This #define may be used to conditionally compile device-specific code to
-// support either the prior ANativeWindow interface, which did not pass libsync
-// fences around, or the new interface that does. This #define is only present
-// when the ANativeWindow interface does include libsync support.
-#define ANDROID_NATIVE_WINDOW_HAS_SYNC 1
-
-// ---------------------------------------------------------------------------
-
-typedef const native_handle_t* buffer_handle_t;
-
-// ---------------------------------------------------------------------------
-
-typedef struct android_native_rect_t
-{
- int32_t left;
- int32_t top;
- int32_t right;
- int32_t bottom;
-} android_native_rect_t;
-
-// ---------------------------------------------------------------------------
-
-typedef struct android_native_base_t
-{
- /* a magic value defined by the actual EGL native type */
- int magic;
-
- /* the sizeof() of the actual EGL native type */
- int version;
-
- void* reserved[4];
-
- /* reference-counting interface */
- void (*incRef)(struct android_native_base_t* base);
- void (*decRef)(struct android_native_base_t* base);
-} android_native_base_t;
-
-typedef struct ANativeWindowBuffer
-{
-#ifdef __cplusplus
- ANativeWindowBuffer() {
- common.magic = ANDROID_NATIVE_BUFFER_MAGIC;
- common.version = sizeof(ANativeWindowBuffer);
- memset(common.reserved, 0, sizeof(common.reserved));
- }
-
- // Implement the methods that sp<ANativeWindowBuffer> expects so that it
- // can be used to automatically refcount ANativeWindowBuffer's.
- void incStrong(const void* /*id*/) const {
- common.incRef(const_cast<android_native_base_t*>(&common));
- }
- void decStrong(const void* /*id*/) const {
- common.decRef(const_cast<android_native_base_t*>(&common));
- }
-#endif
-
- struct android_native_base_t common;
-
- int width;
- int height;
- int stride;
- int format;
- int usage;
- uintptr_t layerCount;
-
- void* reserved[1];
-
- buffer_handle_t handle;
-
- void* reserved_proc[8];
-} ANativeWindowBuffer_t;
-
-// Old typedef for backwards compatibility.
-typedef ANativeWindowBuffer_t android_native_buffer_t;
-
-// ---------------------------------------------------------------------------
-
-/* attributes queriable with query() */
-enum {
- NATIVE_WINDOW_WIDTH = 0,
- NATIVE_WINDOW_HEIGHT = 1,
- NATIVE_WINDOW_FORMAT = 2,
-
- /* The minimum number of buffers that must remain un-dequeued after a buffer
- * has been queued. This value applies only if set_buffer_count was used to
- * override the number of buffers and if a buffer has since been queued.
- * Users of the set_buffer_count ANativeWindow method should query this
- * value before calling set_buffer_count. If it is necessary to have N
- * buffers simultaneously dequeued as part of the steady-state operation,
- * and this query returns M then N+M buffers should be requested via
- * native_window_set_buffer_count.
- *
- * Note that this value does NOT apply until a single buffer has been
- * queued. In particular this means that it is possible to:
- *
- * 1. Query M = min undequeued buffers
- * 2. Set the buffer count to N + M
- * 3. Dequeue all N + M buffers
- * 4. Cancel M buffers
- * 5. Queue, dequeue, queue, dequeue, ad infinitum
- */
- NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS = 3,
-
- /* Check whether queueBuffer operations on the ANativeWindow send the buffer
- * to the window compositor. The query sets the returned 'value' argument
- * to 1 if the ANativeWindow DOES send queued buffers directly to the window
- * compositor and 0 if the buffers do not go directly to the window
- * compositor.
- *
- * This can be used to determine whether protected buffer content should be
- * sent to the ANativeWindow. Note, however, that a result of 1 does NOT
- * indicate that queued buffers will be protected from applications or users
- * capturing their contents. If that behavior is desired then some other
- * mechanism (e.g. the GRALLOC_USAGE_PROTECTED flag) should be used in
- * conjunction with this query.
- */
- NATIVE_WINDOW_QUEUES_TO_WINDOW_COMPOSER = 4,
-
- /* Get the concrete type of a ANativeWindow. See below for the list of
- * possible return values.
- *
- * This query should not be used outside the Android framework and will
- * likely be removed in the near future.
- */
- NATIVE_WINDOW_CONCRETE_TYPE = 5,
-
-
- /*
- * Default width and height of ANativeWindow buffers, these are the
- * dimensions of the window buffers irrespective of the
- * NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS call and match the native window
- * size unless overridden by NATIVE_WINDOW_SET_BUFFERS_USER_DIMENSIONS.
- */
- NATIVE_WINDOW_DEFAULT_WIDTH = 6,
- NATIVE_WINDOW_DEFAULT_HEIGHT = 7,
-
- /*
- * transformation that will most-likely be applied to buffers. This is only
- * a hint, the actual transformation applied might be different.
- *
- * INTENDED USE:
- *
- * The transform hint can be used by a producer, for instance the GLES
- * driver, to pre-rotate the rendering such that the final transformation
- * in the composer is identity. This can be very useful when used in
- * conjunction with the h/w composer HAL, in situations where it
- * cannot handle arbitrary rotations.
- *
- * 1. Before dequeuing a buffer, the GL driver (or any other ANW client)
- * queries the ANW for NATIVE_WINDOW_TRANSFORM_HINT.
- *
- * 2. The GL driver overrides the width and height of the ANW to
- * account for NATIVE_WINDOW_TRANSFORM_HINT. This is done by querying
- * NATIVE_WINDOW_DEFAULT_{WIDTH | HEIGHT}, swapping the dimensions
- * according to NATIVE_WINDOW_TRANSFORM_HINT and calling
- * native_window_set_buffers_dimensions().
- *
- * 3. The GL driver dequeues a buffer of the new pre-rotated size.
- *
- * 4. The GL driver renders to the buffer such that the image is
- * already transformed, that is applying NATIVE_WINDOW_TRANSFORM_HINT
- * to the rendering.
- *
- * 5. The GL driver calls native_window_set_transform to apply
- * inverse transformation to the buffer it just rendered.
- * In order to do this, the GL driver needs
- * to calculate the inverse of NATIVE_WINDOW_TRANSFORM_HINT, this is
- * done easily:
- *
- * int hintTransform, inverseTransform;
- * query(..., NATIVE_WINDOW_TRANSFORM_HINT, &hintTransform);
- * inverseTransform = hintTransform;
- * if (hintTransform & HAL_TRANSFORM_ROT_90)
- * inverseTransform ^= HAL_TRANSFORM_ROT_180;
- *
- *
- * 6. The GL driver queues the pre-transformed buffer.
- *
- * 7. The composer combines the buffer transform with the display
- * transform. If the buffer transform happens to cancel out the
- * display transform then no rotation is needed.
- *
- */
- NATIVE_WINDOW_TRANSFORM_HINT = 8,
-
- /*
- * Boolean that indicates whether the consumer is running more than
- * one buffer behind the producer.
- */
- NATIVE_WINDOW_CONSUMER_RUNNING_BEHIND = 9,
-
- /*
- * The consumer gralloc usage bits currently set by the consumer.
- * The values are defined in hardware/libhardware/include/gralloc.h.
- */
- NATIVE_WINDOW_CONSUMER_USAGE_BITS = 10,
-
- /**
- * Transformation that will by applied to buffers by the hwcomposer.
- * This must not be set or checked by producer endpoints, and will
- * disable the transform hint set in SurfaceFlinger (see
- * NATIVE_WINDOW_TRANSFORM_HINT).
- *
- * INTENDED USE:
- * Temporary - Please do not use this. This is intended only to be used
- * by the camera's LEGACY mode.
- *
- * In situations where a SurfaceFlinger client wishes to set a transform
- * that is not visible to the producer, and will always be applied in the
- * hardware composer, the client can set this flag with
- * native_window_set_buffers_sticky_transform. This can be used to rotate
- * and flip buffers consumed by hardware composer without actually changing
- * the aspect ratio of the buffers produced.
- */
- NATIVE_WINDOW_STICKY_TRANSFORM = 11,
-
- /**
- * The default data space for the buffers as set by the consumer.
- * The values are defined in graphics.h.
- */
- NATIVE_WINDOW_DEFAULT_DATASPACE = 12,
-
- /*
- * Returns the age of the contents of the most recently dequeued buffer as
- * the number of frames that have elapsed since it was last queued. For
- * example, if the window is double-buffered, the age of any given buffer in
- * steady state will be 2. If the dequeued buffer has never been queued, its
- * age will be 0.
- */
- NATIVE_WINDOW_BUFFER_AGE = 13,
-
- /*
- * Returns the duration of the last dequeueBuffer call in microseconds
- */
- NATIVE_WINDOW_LAST_DEQUEUE_DURATION = 14,
-
- /*
- * Returns the duration of the last queueBuffer call in microseconds
- */
- NATIVE_WINDOW_LAST_QUEUE_DURATION = 15,
-
- /*
- * Returns the number of image layers that the ANativeWindow buffer
- * contains. By default this is 1, unless a buffer is explicitly allocated
- * to contain multiple layers.
- */
- NATIVE_WINDOW_LAYER_COUNT = 16,
-
- /*
- * Returns 1 if the native window is valid, 0 otherwise. native window is valid
- * if it is safe (i.e. no crash will occur) to call any method on it.
- */
- NATIVE_WINDOW_IS_VALID = 17,
-
- /*
- * Returns 1 if NATIVE_WINDOW_GET_FRAME_TIMESTAMPS will return display
- * present info, 0 if it won't.
- */
- NATIVE_WINDOW_FRAME_TIMESTAMPS_SUPPORTS_PRESENT = 18,
-
- /*
- * The consumer end is capable of handling protected buffers, i.e. buffer
- * with GRALLOC_USAGE_PROTECTED usage bits on.
- */
- NATIVE_WINDOW_CONSUMER_IS_PROTECTED = 19,
-};
-
-/* Valid operations for the (*perform)() hook.
- *
- * Values marked as 'deprecated' are supported, but have been superceded by
- * other functionality.
- *
- * Values marked as 'private' should be considered private to the framework.
- * HAL implementation code with access to an ANativeWindow should not use these,
- * as it may not interact properly with the framework's use of the
- * ANativeWindow.
- */
-enum {
-// clang-format off
- NATIVE_WINDOW_SET_USAGE = 0,
- NATIVE_WINDOW_CONNECT = 1, /* deprecated */
- NATIVE_WINDOW_DISCONNECT = 2, /* deprecated */
- NATIVE_WINDOW_SET_CROP = 3, /* private */
- NATIVE_WINDOW_SET_BUFFER_COUNT = 4,
- NATIVE_WINDOW_SET_BUFFERS_GEOMETRY = 5, /* deprecated */
- NATIVE_WINDOW_SET_BUFFERS_TRANSFORM = 6,
- NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP = 7,
- NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS = 8,
- NATIVE_WINDOW_SET_BUFFERS_FORMAT = 9,
- NATIVE_WINDOW_SET_SCALING_MODE = 10, /* private */
- NATIVE_WINDOW_LOCK = 11, /* private */
- NATIVE_WINDOW_UNLOCK_AND_POST = 12, /* private */
- NATIVE_WINDOW_API_CONNECT = 13, /* private */
- NATIVE_WINDOW_API_DISCONNECT = 14, /* private */
- NATIVE_WINDOW_SET_BUFFERS_USER_DIMENSIONS = 15, /* private */
- NATIVE_WINDOW_SET_POST_TRANSFORM_CROP = 16, /* private */
- NATIVE_WINDOW_SET_BUFFERS_STICKY_TRANSFORM = 17,/* private */
- NATIVE_WINDOW_SET_SIDEBAND_STREAM = 18,
- NATIVE_WINDOW_SET_BUFFERS_DATASPACE = 19,
- NATIVE_WINDOW_SET_SURFACE_DAMAGE = 20, /* private */
- NATIVE_WINDOW_SET_SHARED_BUFFER_MODE = 21,
- NATIVE_WINDOW_SET_AUTO_REFRESH = 22,
- NATIVE_WINDOW_GET_REFRESH_CYCLE_DURATION= 23,
- NATIVE_WINDOW_GET_NEXT_FRAME_ID = 24,
- NATIVE_WINDOW_ENABLE_FRAME_TIMESTAMPS = 25,
- NATIVE_WINDOW_GET_COMPOSITOR_TIMING = 26,
- NATIVE_WINDOW_GET_FRAME_TIMESTAMPS = 27,
- NATIVE_WINDOW_GET_WIDE_COLOR_SUPPORT = 28,
- NATIVE_WINDOW_GET_HDR_SUPPORT = 29,
-// clang-format on
-};
-
-/* parameter for NATIVE_WINDOW_[API_][DIS]CONNECT */
-enum {
- /* Buffers will be queued by EGL via eglSwapBuffers after being filled using
- * OpenGL ES.
- */
- NATIVE_WINDOW_API_EGL = 1,
-
- /* Buffers will be queued after being filled using the CPU
- */
- NATIVE_WINDOW_API_CPU = 2,
-
- /* Buffers will be queued by Stagefright after being filled by a video
- * decoder. The video decoder can either be a software or hardware decoder.
- */
- NATIVE_WINDOW_API_MEDIA = 3,
-
- /* Buffers will be queued by the the camera HAL.
- */
- NATIVE_WINDOW_API_CAMERA = 4,
-};
-
-/* parameter for NATIVE_WINDOW_SET_BUFFERS_TRANSFORM */
-enum {
- /* flip source image horizontally */
- NATIVE_WINDOW_TRANSFORM_FLIP_H = HAL_TRANSFORM_FLIP_H ,
- /* flip source image vertically */
- NATIVE_WINDOW_TRANSFORM_FLIP_V = HAL_TRANSFORM_FLIP_V,
- /* rotate source image 90 degrees clock-wise, and is applied after TRANSFORM_FLIP_{H|V} */
- NATIVE_WINDOW_TRANSFORM_ROT_90 = HAL_TRANSFORM_ROT_90,
- /* rotate source image 180 degrees */
- NATIVE_WINDOW_TRANSFORM_ROT_180 = HAL_TRANSFORM_ROT_180,
- /* rotate source image 270 degrees clock-wise */
- NATIVE_WINDOW_TRANSFORM_ROT_270 = HAL_TRANSFORM_ROT_270,
- /* transforms source by the inverse transform of the screen it is displayed onto. This
- * transform is applied last */
- NATIVE_WINDOW_TRANSFORM_INVERSE_DISPLAY = 0x08
-};
-
-/* parameter for NATIVE_WINDOW_SET_SCALING_MODE
- * keep in sync with Surface.java in frameworks/base */
-enum {
- /* the window content is not updated (frozen) until a buffer of
- * the window size is received (enqueued)
- */
- NATIVE_WINDOW_SCALING_MODE_FREEZE = 0,
- /* the buffer is scaled in both dimensions to match the window size */
- NATIVE_WINDOW_SCALING_MODE_SCALE_TO_WINDOW = 1,
- /* the buffer is scaled uniformly such that the smaller dimension
- * of the buffer matches the window size (cropping in the process)
- */
- NATIVE_WINDOW_SCALING_MODE_SCALE_CROP = 2,
- /* the window is clipped to the size of the buffer's crop rectangle; pixels
- * outside the crop rectangle are treated as if they are completely
- * transparent.
- */
- NATIVE_WINDOW_SCALING_MODE_NO_SCALE_CROP = 3,
-};
-
-/* values returned by the NATIVE_WINDOW_CONCRETE_TYPE query */
-enum {
- NATIVE_WINDOW_FRAMEBUFFER = 0, /* FramebufferNativeWindow */
- NATIVE_WINDOW_SURFACE = 1, /* Surface */
-};
-
-/* parameter for NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP
- *
- * Special timestamp value to indicate that timestamps should be auto-generated
- * by the native window when queueBuffer is called. This is equal to INT64_MIN,
- * defined directly to avoid problems with C99/C++ inclusion of stdint.h.
- */
-static const int64_t NATIVE_WINDOW_TIMESTAMP_AUTO = (-9223372036854775807LL-1);
-
-/* parameter for NATIVE_WINDOW_GET_FRAME_TIMESTAMPS
- *
- * Special timestamp value to indicate the timestamps aren't yet known or
- * that they are invalid.
- */
-static const int64_t NATIVE_WINDOW_TIMESTAMP_PENDING = -2;
-static const int64_t NATIVE_WINDOW_TIMESTAMP_INVALID = -1;
-
-struct ANativeWindow
-{
-#ifdef __cplusplus
- ANativeWindow()
- : flags(0), minSwapInterval(0), maxSwapInterval(0), xdpi(0), ydpi(0)
- {
- common.magic = ANDROID_NATIVE_WINDOW_MAGIC;
- common.version = sizeof(ANativeWindow);
- memset(common.reserved, 0, sizeof(common.reserved));
- }
-
- /* Implement the methods that sp<ANativeWindow> expects so that it
- can be used to automatically refcount ANativeWindow's. */
- void incStrong(const void* /*id*/) const {
- common.incRef(const_cast<android_native_base_t*>(&common));
- }
- void decStrong(const void* /*id*/) const {
- common.decRef(const_cast<android_native_base_t*>(&common));
- }
-#endif
-
- struct android_native_base_t common;
-
- /* flags describing some attributes of this surface or its updater */
- const uint32_t flags;
-
- /* min swap interval supported by this updated */
- const int minSwapInterval;
-
- /* max swap interval supported by this updated */
- const int maxSwapInterval;
-
- /* horizontal and vertical resolution in DPI */
- const float xdpi;
- const float ydpi;
-
- /* Some storage reserved for the OEM's driver. */
- intptr_t oem[4];
-
- /*
- * Set the swap interval for this surface.
- *
- * Returns 0 on success or -errno on error.
- */
- int (*setSwapInterval)(struct ANativeWindow* window,
- int interval);
-
- /*
- * Hook called by EGL to acquire a buffer. After this call, the buffer
- * is not locked, so its content cannot be modified. This call may block if
- * no buffers are available.
- *
- * The window holds a reference to the buffer between dequeueBuffer and
- * either queueBuffer or cancelBuffer, so clients only need their own
- * reference if they might use the buffer after queueing or canceling it.
- * Holding a reference to a buffer after queueing or canceling it is only
- * allowed if a specific buffer count has been set.
- *
- * Returns 0 on success or -errno on error.
- *
- * XXX: This function is deprecated. It will continue to work for some
- * time for binary compatibility, but the new dequeueBuffer function that
- * outputs a fence file descriptor should be used in its place.
- */
- int (*dequeueBuffer_DEPRECATED)(struct ANativeWindow* window,
- struct ANativeWindowBuffer** buffer);
-
- /*
- * hook called by EGL to lock a buffer. This MUST be called before modifying
- * the content of a buffer. The buffer must have been acquired with
- * dequeueBuffer first.
- *
- * Returns 0 on success or -errno on error.
- *
- * XXX: This function is deprecated. It will continue to work for some
- * time for binary compatibility, but it is essentially a no-op, and calls
- * to it should be removed.
- */
- int (*lockBuffer_DEPRECATED)(struct ANativeWindow* window,
- struct ANativeWindowBuffer* buffer);
-
- /*
- * Hook called by EGL when modifications to the render buffer are done.
- * This unlocks and post the buffer.
- *
- * The window holds a reference to the buffer between dequeueBuffer and
- * either queueBuffer or cancelBuffer, so clients only need their own
- * reference if they might use the buffer after queueing or canceling it.
- * Holding a reference to a buffer after queueing or canceling it is only
- * allowed if a specific buffer count has been set.
- *
- * Buffers MUST be queued in the same order than they were dequeued.
- *
- * Returns 0 on success or -errno on error.
- *
- * XXX: This function is deprecated. It will continue to work for some
- * time for binary compatibility, but the new queueBuffer function that
- * takes a fence file descriptor should be used in its place (pass a value
- * of -1 for the fence file descriptor if there is no valid one to pass).
- */
- int (*queueBuffer_DEPRECATED)(struct ANativeWindow* window,
- struct ANativeWindowBuffer* buffer);
-
- /*
- * hook used to retrieve information about the native window.
- *
- * Returns 0 on success or -errno on error.
- */
- int (*query)(const struct ANativeWindow* window,
- int what, int* value);
-
- /*
- * hook used to perform various operations on the surface.
- * (*perform)() is a generic mechanism to add functionality to
- * ANativeWindow while keeping backward binary compatibility.
- *
- * DO NOT CALL THIS HOOK DIRECTLY. Instead, use the helper functions
- * defined below.
- *
- * (*perform)() returns -ENOENT if the 'what' parameter is not supported
- * by the surface's implementation.
- *
- * See above for a list of valid operations, such as
- * NATIVE_WINDOW_SET_USAGE or NATIVE_WINDOW_CONNECT
- */
- int (*perform)(struct ANativeWindow* window,
- int operation, ... );
-
- /*
- * Hook used to cancel a buffer that has been dequeued.
- * No synchronization is performed between dequeue() and cancel(), so
- * either external synchronization is needed, or these functions must be
- * called from the same thread.
- *
- * The window holds a reference to the buffer between dequeueBuffer and
- * either queueBuffer or cancelBuffer, so clients only need their own
- * reference if they might use the buffer after queueing or canceling it.
- * Holding a reference to a buffer after queueing or canceling it is only
- * allowed if a specific buffer count has been set.
- *
- * XXX: This function is deprecated. It will continue to work for some
- * time for binary compatibility, but the new cancelBuffer function that
- * takes a fence file descriptor should be used in its place (pass a value
- * of -1 for the fence file descriptor if there is no valid one to pass).
- */
- int (*cancelBuffer_DEPRECATED)(struct ANativeWindow* window,
- struct ANativeWindowBuffer* buffer);
-
- /*
- * Hook called by EGL to acquire a buffer. This call may block if no
- * buffers are available.
- *
- * The window holds a reference to the buffer between dequeueBuffer and
- * either queueBuffer or cancelBuffer, so clients only need their own
- * reference if they might use the buffer after queueing or canceling it.
- * Holding a reference to a buffer after queueing or canceling it is only
- * allowed if a specific buffer count has been set.
- *
- * The libsync fence file descriptor returned in the int pointed to by the
- * fenceFd argument will refer to the fence that must signal before the
- * dequeued buffer may be written to. A value of -1 indicates that the
- * caller may access the buffer immediately without waiting on a fence. If
- * a valid file descriptor is returned (i.e. any value except -1) then the
- * caller is responsible for closing the file descriptor.
- *
- * Returns 0 on success or -errno on error.
- */
- int (*dequeueBuffer)(struct ANativeWindow* window,
- struct ANativeWindowBuffer** buffer, int* fenceFd);
-
- /*
- * Hook called by EGL when modifications to the render buffer are done.
- * This unlocks and post the buffer.
- *
- * The window holds a reference to the buffer between dequeueBuffer and
- * either queueBuffer or cancelBuffer, so clients only need their own
- * reference if they might use the buffer after queueing or canceling it.
- * Holding a reference to a buffer after queueing or canceling it is only
- * allowed if a specific buffer count has been set.
- *
- * The fenceFd argument specifies a libsync fence file descriptor for a
- * fence that must signal before the buffer can be accessed. If the buffer
- * can be accessed immediately then a value of -1 should be used. The
- * caller must not use the file descriptor after it is passed to
- * queueBuffer, and the ANativeWindow implementation is responsible for
- * closing it.
- *
- * Returns 0 on success or -errno on error.
- */
- int (*queueBuffer)(struct ANativeWindow* window,
- struct ANativeWindowBuffer* buffer, int fenceFd);
-
- /*
- * Hook used to cancel a buffer that has been dequeued.
- * No synchronization is performed between dequeue() and cancel(), so
- * either external synchronization is needed, or these functions must be
- * called from the same thread.
- *
- * The window holds a reference to the buffer between dequeueBuffer and
- * either queueBuffer or cancelBuffer, so clients only need their own
- * reference if they might use the buffer after queueing or canceling it.
- * Holding a reference to a buffer after queueing or canceling it is only
- * allowed if a specific buffer count has been set.
- *
- * The fenceFd argument specifies a libsync fence file decsriptor for a
- * fence that must signal before the buffer can be accessed. If the buffer
- * can be accessed immediately then a value of -1 should be used.
- *
- * Note that if the client has not waited on the fence that was returned
- * from dequeueBuffer, that same fence should be passed to cancelBuffer to
- * ensure that future uses of the buffer are preceded by a wait on that
- * fence. The caller must not use the file descriptor after it is passed
- * to cancelBuffer, and the ANativeWindow implementation is responsible for
- * closing it.
- *
- * Returns 0 on success or -errno on error.
- */
- int (*cancelBuffer)(struct ANativeWindow* window,
- struct ANativeWindowBuffer* buffer, int fenceFd);
-};
-
- /* Backwards compatibility: use ANativeWindow (struct ANativeWindow in C).
- * android_native_window_t is deprecated.
- */
-typedef struct ANativeWindow ANativeWindow;
-typedef struct ANativeWindow android_native_window_t __deprecated;
-
-/*
- * native_window_set_usage(..., usage)
- * Sets the intended usage flags for the next buffers
- * acquired with (*lockBuffer)() and on.
- * By default (if this function is never called), a usage of
- * GRALLOC_USAGE_HW_RENDER | GRALLOC_USAGE_HW_TEXTURE
- * is assumed.
- * Calling this function will usually cause following buffers to be
- * reallocated.
- */
-
-static inline int native_window_set_usage(
- struct ANativeWindow* window, int usage)
-{
- return window->perform(window, NATIVE_WINDOW_SET_USAGE, usage);
-}
-
-/* deprecated. Always returns 0. Don't call. */
-static inline int native_window_connect(
- struct ANativeWindow* window __UNUSED, int api __UNUSED) __deprecated;
-
-static inline int native_window_connect(
- struct ANativeWindow* window __UNUSED, int api __UNUSED) {
- return 0;
-}
-
-/* deprecated. Always returns 0. Don't call. */
-static inline int native_window_disconnect(
- struct ANativeWindow* window __UNUSED, int api __UNUSED) __deprecated;
-
-static inline int native_window_disconnect(
- struct ANativeWindow* window __UNUSED, int api __UNUSED) {
- return 0;
-}
-
-/*
- * native_window_set_crop(..., crop)
- * Sets which region of the next queued buffers needs to be considered.
- * Depending on the scaling mode, a buffer's crop region is scaled and/or
- * cropped to match the surface's size. This function sets the crop in
- * pre-transformed buffer pixel coordinates.
- *
- * The specified crop region applies to all buffers queued after it is called.
- *
- * If 'crop' is NULL, subsequently queued buffers won't be cropped.
- *
- * An error is returned if for instance the crop region is invalid, out of the
- * buffer's bound or if the window is invalid.
- */
-static inline int native_window_set_crop(
- struct ANativeWindow* window,
- android_native_rect_t const * crop)
-{
- return window->perform(window, NATIVE_WINDOW_SET_CROP, crop);
-}
-
-/*
- * native_window_set_post_transform_crop(..., crop)
- * Sets which region of the next queued buffers needs to be considered.
- * Depending on the scaling mode, a buffer's crop region is scaled and/or
- * cropped to match the surface's size. This function sets the crop in
- * post-transformed pixel coordinates.
- *
- * The specified crop region applies to all buffers queued after it is called.
- *
- * If 'crop' is NULL, subsequently queued buffers won't be cropped.
- *
- * An error is returned if for instance the crop region is invalid, out of the
- * buffer's bound or if the window is invalid.
- */
-static inline int native_window_set_post_transform_crop(
- struct ANativeWindow* window,
- android_native_rect_t const * crop)
-{
- return window->perform(window, NATIVE_WINDOW_SET_POST_TRANSFORM_CROP, crop);
-}
-
-/*
- * native_window_set_active_rect(..., active_rect)
- *
- * This function is deprecated and will be removed soon. For now it simply
- * sets the post-transform crop for compatibility while multi-project commits
- * get checked.
- */
-static inline int native_window_set_active_rect(
- struct ANativeWindow* window,
- android_native_rect_t const * active_rect) __deprecated;
-
-static inline int native_window_set_active_rect(
- struct ANativeWindow* window,
- android_native_rect_t const * active_rect)
-{
- return native_window_set_post_transform_crop(window, active_rect);
-}
-
-/*
- * native_window_set_buffer_count(..., count)
- * Sets the number of buffers associated with this native window.
- */
-static inline int native_window_set_buffer_count(
- struct ANativeWindow* window,
- size_t bufferCount)
-{
- return window->perform(window, NATIVE_WINDOW_SET_BUFFER_COUNT, bufferCount);
-}
-
-/*
- * native_window_set_buffers_geometry(..., int w, int h, int format)
- * All buffers dequeued after this call will have the dimensions and format
- * specified. A successful call to this function has the same effect as calling
- * native_window_set_buffers_size and native_window_set_buffers_format.
- *
- * XXX: This function is deprecated. The native_window_set_buffers_dimensions
- * and native_window_set_buffers_format functions should be used instead.
- */
-static inline int native_window_set_buffers_geometry(
- struct ANativeWindow* window,
- int w, int h, int format) __deprecated;
-
-static inline int native_window_set_buffers_geometry(
- struct ANativeWindow* window,
- int w, int h, int format)
-{
- return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_GEOMETRY,
- w, h, format);
-}
-
-/*
- * native_window_set_buffers_dimensions(..., int w, int h)
- * All buffers dequeued after this call will have the dimensions specified.
- * In particular, all buffers will have a fixed-size, independent from the
- * native-window size. They will be scaled according to the scaling mode
- * (see native_window_set_scaling_mode) upon window composition.
- *
- * If w and h are 0, the normal behavior is restored. That is, dequeued buffers
- * following this call will be sized to match the window's size.
- *
- * Calling this function will reset the window crop to a NULL value, which
- * disables cropping of the buffers.
- */
-static inline int native_window_set_buffers_dimensions(
- struct ANativeWindow* window,
- int w, int h)
-{
- return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS,
- w, h);
-}
-
-/*
- * native_window_set_buffers_user_dimensions(..., int w, int h)
- *
- * Sets the user buffer size for the window, which overrides the
- * window's size. All buffers dequeued after this call will have the
- * dimensions specified unless overridden by
- * native_window_set_buffers_dimensions. All buffers will have a
- * fixed-size, independent from the native-window size. They will be
- * scaled according to the scaling mode (see
- * native_window_set_scaling_mode) upon window composition.
- *
- * If w and h are 0, the normal behavior is restored. That is, the
- * default buffer size will match the windows's size.
- *
- * Calling this function will reset the window crop to a NULL value, which
- * disables cropping of the buffers.
- */
-static inline int native_window_set_buffers_user_dimensions(
- struct ANativeWindow* window,
- int w, int h)
-{
- return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_USER_DIMENSIONS,
- w, h);
-}
-
-/*
- * native_window_set_buffers_format(..., int format)
- * All buffers dequeued after this call will have the format specified.
- *
- * If the specified format is 0, the default buffer format will be used.
- */
-static inline int native_window_set_buffers_format(
- struct ANativeWindow* window,
- int format)
-{
- return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_FORMAT, format);
-}
-
-/*
- * native_window_set_buffers_data_space(..., int dataSpace)
- * All buffers queued after this call will be associated with the dataSpace
- * parameter specified.
- *
- * dataSpace specifies additional information about the buffer that's dependent
- * on the buffer format and the endpoints. For example, it can be used to convey
- * the color space of the image data in the buffer, or it can be used to
- * indicate that the buffers contain depth measurement data instead of color
- * images. The default dataSpace is 0, HAL_DATASPACE_UNKNOWN, unless it has been
- * overridden by the consumer.
- */
-static inline int native_window_set_buffers_data_space(
- struct ANativeWindow* window,
- android_dataspace_t dataSpace)
-{
- return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_DATASPACE,
- dataSpace);
-}
-
-/*
- * native_window_set_buffers_transform(..., int transform)
- * All buffers queued after this call will be displayed transformed according
- * to the transform parameter specified.
- */
-static inline int native_window_set_buffers_transform(
- struct ANativeWindow* window,
- int transform)
-{
- return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_TRANSFORM,
- transform);
-}
-
-/*
- * native_window_set_buffers_sticky_transform(..., int transform)
- * All buffers queued after this call will be displayed transformed according
- * to the transform parameter specified applied on top of the regular buffer
- * transform. Setting this transform will disable the transform hint.
- *
- * Temporary - This is only intended to be used by the LEGACY camera mode, do
- * not use this for anything else.
- */
-static inline int native_window_set_buffers_sticky_transform(
- struct ANativeWindow* window,
- int transform)
-{
- return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_STICKY_TRANSFORM,
- transform);
-}
-
-/*
- * native_window_set_buffers_timestamp(..., int64_t timestamp)
- * All buffers queued after this call will be associated with the timestamp
- * parameter specified. If the timestamp is set to NATIVE_WINDOW_TIMESTAMP_AUTO
- * (the default), timestamps will be generated automatically when queueBuffer is
- * called. The timestamp is measured in nanoseconds, and is normally monotonically
- * increasing. The timestamp should be unaffected by time-of-day adjustments,
- * and for a camera should be strictly monotonic but for a media player may be
- * reset when the position is set.
- */
-static inline int native_window_set_buffers_timestamp(
- struct ANativeWindow* window,
- int64_t timestamp)
-{
- return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP,
- timestamp);
-}
-
-/*
- * native_window_set_scaling_mode(..., int mode)
- * All buffers queued after this call will be associated with the scaling mode
- * specified.
- */
-static inline int native_window_set_scaling_mode(
- struct ANativeWindow* window,
- int mode)
-{
- return window->perform(window, NATIVE_WINDOW_SET_SCALING_MODE,
- mode);
-}
-
-/*
- * native_window_api_connect(..., int api)
- * connects an API to this window. only one API can be connected at a time.
- * Returns -EINVAL if for some reason the window cannot be connected, which
- * can happen if it's connected to some other API.
- */
-static inline int native_window_api_connect(
- struct ANativeWindow* window, int api)
-{
- return window->perform(window, NATIVE_WINDOW_API_CONNECT, api);
-}
-
-/*
- * native_window_api_disconnect(..., int api)
- * disconnect the API from this window.
- * An error is returned if for instance the window wasn't connected in the
- * first place.
- */
-static inline int native_window_api_disconnect(
- struct ANativeWindow* window, int api)
-{
- return window->perform(window, NATIVE_WINDOW_API_DISCONNECT, api);
-}
-
-/*
- * native_window_dequeue_buffer_and_wait(...)
- * Dequeue a buffer and wait on the fence associated with that buffer. The
- * buffer may safely be accessed immediately upon this function returning. An
- * error is returned if either of the dequeue or the wait operations fail.
- */
-static inline int native_window_dequeue_buffer_and_wait(ANativeWindow *anw,
- struct ANativeWindowBuffer** anb) {
- return anw->dequeueBuffer_DEPRECATED(anw, anb);
-}
-
-/*
- * native_window_set_sideband_stream(..., native_handle_t*)
- * Attach a sideband buffer stream to a native window.
- */
-static inline int native_window_set_sideband_stream(
- struct ANativeWindow* window,
- native_handle_t* sidebandHandle)
-{
- return window->perform(window, NATIVE_WINDOW_SET_SIDEBAND_STREAM,
- sidebandHandle);
-}
-
-/*
- * native_window_set_surface_damage(..., android_native_rect_t* rects, int numRects)
- * Set the surface damage (i.e., the region of the surface that has changed
- * since the previous frame). The damage set by this call will be reset (to the
- * default of full-surface damage) after calling queue, so this must be called
- * prior to every frame with damage that does not cover the whole surface if the
- * caller desires downstream consumers to use this optimization.
- *
- * The damage region is specified as an array of rectangles, with the important
- * caveat that the origin of the surface is considered to be the bottom-left
- * corner, as in OpenGL ES.
- *
- * If numRects is set to 0, rects may be NULL, and the surface damage will be
- * set to the full surface (the same as if this function had not been called for
- * this frame).
- */
-static inline int native_window_set_surface_damage(
- struct ANativeWindow* window,
- const android_native_rect_t* rects, size_t numRects)
-{
- return window->perform(window, NATIVE_WINDOW_SET_SURFACE_DAMAGE,
- rects, numRects);
-}
-
-/*
- * native_window_set_shared_buffer_mode(..., bool sharedBufferMode)
- * Enable/disable shared buffer mode
- */
-static inline int native_window_set_shared_buffer_mode(
- struct ANativeWindow* window,
- bool sharedBufferMode)
-{
- return window->perform(window, NATIVE_WINDOW_SET_SHARED_BUFFER_MODE,
- sharedBufferMode);
-}
-
-/*
- * native_window_set_auto_refresh(..., autoRefresh)
- * Enable/disable auto refresh when in shared buffer mode
- */
-static inline int native_window_set_auto_refresh(
- struct ANativeWindow* window,
- bool autoRefresh)
-{
- return window->perform(window, NATIVE_WINDOW_SET_AUTO_REFRESH, autoRefresh);
-}
-
-static inline int native_window_get_refresh_cycle_duration(
- struct ANativeWindow* window,
- int64_t* outRefreshDuration)
-{
- return window->perform(window, NATIVE_WINDOW_GET_REFRESH_CYCLE_DURATION,
- outRefreshDuration);
-}
-
-static inline int native_window_get_next_frame_id(
- struct ANativeWindow* window, uint64_t* frameId)
-{
- return window->perform(window, NATIVE_WINDOW_GET_NEXT_FRAME_ID, frameId);
-}
-
-static inline int native_window_enable_frame_timestamps(
- struct ANativeWindow* window, bool enable)
-{
- return window->perform(window, NATIVE_WINDOW_ENABLE_FRAME_TIMESTAMPS,
- enable);
-}
-
-static inline int native_window_get_compositor_timing(
- struct ANativeWindow* window,
- int64_t* compositeDeadline, int64_t* compositeInterval,
- int64_t* compositeToPresentLatency)
-{
- return window->perform(window, NATIVE_WINDOW_GET_COMPOSITOR_TIMING,
- compositeDeadline, compositeInterval, compositeToPresentLatency);
-}
-
-static inline int native_window_get_frame_timestamps(
- struct ANativeWindow* window, uint64_t frameId,
- int64_t* outRequestedPresentTime, int64_t* outAcquireTime,
- int64_t* outLatchTime, int64_t* outFirstRefreshStartTime,
- int64_t* outLastRefreshStartTime, int64_t* outGpuCompositionDoneTime,
- int64_t* outDisplayPresentTime, int64_t* outDequeueReadyTime,
- int64_t* outReleaseTime)
-{
- return window->perform(window, NATIVE_WINDOW_GET_FRAME_TIMESTAMPS,
- frameId, outRequestedPresentTime, outAcquireTime, outLatchTime,
- outFirstRefreshStartTime, outLastRefreshStartTime,
- outGpuCompositionDoneTime, outDisplayPresentTime,
- outDequeueReadyTime, outReleaseTime);
-}
-
-static inline int native_window_get_wide_color_support(
- struct ANativeWindow* window, bool* outSupport) {
- return window->perform(window, NATIVE_WINDOW_GET_WIDE_COLOR_SUPPORT,
- outSupport);
-}
-
-static inline int native_window_get_hdr_support(struct ANativeWindow* window,
- bool* outSupport) {
- return window->perform(window, NATIVE_WINDOW_GET_HDR_SUPPORT, outSupport);
-}
-
-__END_DECLS
diff --git a/libsystem/include/system/window.h b/libsystem/include/system/window.h
deleted file mode 100644
index efa10d6..0000000
--- a/libsystem/include/system/window.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2011 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H
-#define SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H
-
-#include <system/window-deprecated.h>
-
-#endif /* SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H */
diff --git a/libvndksupport/linker.c b/libvndksupport/linker.c
index 12aa3be..d82307b 100644
--- a/libvndksupport/linker.c
+++ b/libvndksupport/linker.c
@@ -47,4 +47,6 @@
return dlopen(name, flag);
}
-int android_unload_sphal_library(void* handle) { return dlclose(handle); }
+int android_unload_sphal_library(void* handle) {
+ return dlclose(handle);
+}
diff --git a/qemu_pipe/Android.mk b/qemu_pipe/Android.mk
new file mode 100644
index 0000000..6e0144c
--- /dev/null
+++ b/qemu_pipe/Android.mk
@@ -0,0 +1,19 @@
+# Copyright 2011 The Android Open Source Project
+
+LOCAL_PATH:= $(call my-dir)
+
+common_static_libraries := \
+ libbase
+include $(CLEAR_VARS)
+LOCAL_CLANG := true
+LOCAL_SANITIZE := integer
+LOCAL_SRC_FILES:= \
+ qemu_pipe.cpp
+LOCAL_C_INCLUDES := \
+ $(LOCAL_PATH)/include \
+ system/base/include
+LOCAL_MODULE:= libqemu_pipe
+LOCAL_STATIC_LIBRARIES := $(common_static_libraries)
+LOCAL_EXPORT_C_INCLUDE_DIRS := $(LOCAL_PATH)/include
+LOCAL_CFLAGS := -Werror
+include $(BUILD_STATIC_LIBRARY)
diff --git a/qemu_pipe/include/qemu_pipe.h b/qemu_pipe/include/qemu_pipe.h
new file mode 100644
index 0000000..0987498
--- /dev/null
+++ b/qemu_pipe/include/qemu_pipe.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2011 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef ANDROID_CORE_INCLUDE_QEMU_PIPE_H
+#define ANDROID_CORE_INCLUDE_QEMU_PIPE_H
+
+#include <stddef.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+// Try to open a new Qemu fast-pipe. This function returns a file descriptor
+// that can be used to communicate with a named service managed by the
+// emulator.
+//
+// This file descriptor can be used as a standard pipe/socket descriptor.
+//
+// 'pipeName' is the name of the emulator service you want to connect to,
+// and should begin with 'pipe:' (e.g. 'pipe:camera' or 'pipe:opengles').
+// For backward compatibility, the 'pipe:' prefix can be omitted, and in
+// that case, qemu_pipe_open will add it for you.
+
+// On success, return a valid file descriptor, or -1/errno on failure. E.g.:
+//
+// EINVAL -> unknown/unsupported pipeName
+// ENOSYS -> fast pipes not available in this system.
+//
+// ENOSYS should never happen, except if you're trying to run within a
+// misconfigured emulator.
+//
+// You should be able to open several pipes to the same pipe service,
+// except for a few special cases (e.g. GSM modem), where EBUSY will be
+// returned if more than one client tries to connect to it.
+int qemu_pipe_open(const char* pipeName);
+
+// Send a framed message |buff| of |len| bytes through the |fd| descriptor.
+// This really adds a 4-hexchar prefix describing the payload size.
+// Returns 0 on success, and -1 on error.
+int qemu_pipe_frame_send(int fd, const void* buff, size_t len);
+
+// Read a frame message from |fd|, and store it into |buff| of |len| bytes.
+// If the framed message is larger than |len|, then this returns -1 and the
+// content is lost. Otherwise, this returns the size of the message. NOTE:
+// empty messages are possible in a framed wire protocol and do not mean
+// end-of-stream.
+int qemu_pipe_frame_recv(int fd, void* buff, size_t len);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ANDROID_CORE_INCLUDE_QEMU_PIPE_H */
diff --git a/qemu_pipe/qemu_pipe.cpp b/qemu_pipe/qemu_pipe.cpp
new file mode 100644
index 0000000..beeccb0
--- /dev/null
+++ b/qemu_pipe/qemu_pipe.cpp
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2011 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "qemu_pipe.h"
+
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <errno.h>
+#include <stdio.h>
+
+#include <android-base/file.h>
+
+using android::base::ReadFully;
+using android::base::WriteFully;
+
+// Define QEMU_PIPE_DEBUG if you want to print error messages when an error
+// occurs during pipe operations. The macro should simply take a printf-style
+// formatting string followed by optional arguments.
+#ifndef QEMU_PIPE_DEBUG
+# define QEMU_PIPE_DEBUG(...) (void)0
+#endif
+
+int qemu_pipe_open(const char* pipeName) {
+ // Sanity check.
+ if (!pipeName) {
+ errno = EINVAL;
+ return -1;
+ }
+
+ int fd = TEMP_FAILURE_RETRY(open("/dev/qemu_pipe", O_RDWR));
+ if (fd < 0) {
+ QEMU_PIPE_DEBUG("%s: Could not open /dev/qemu_pipe: %s", __FUNCTION__,
+ strerror(errno));
+ return -1;
+ }
+
+ // Write the pipe name, *including* the trailing zero which is necessary.
+ size_t pipeNameLen = strlen(pipeName);
+ if (WriteFully(fd, pipeName, pipeNameLen + 1U)) {
+ return fd;
+ }
+
+ // now, add 'pipe:' prefix and try again
+ // Note: host side will wait for the trailing '\0' to start
+ // service lookup.
+ const char pipe_prefix[] = "pipe:";
+ if (WriteFully(fd, pipe_prefix, strlen(pipe_prefix)) &&
+ WriteFully(fd, pipeName, pipeNameLen + 1U)) {
+ return fd;
+ }
+ QEMU_PIPE_DEBUG("%s: Could not write to %s pipe service: %s",
+ __FUNCTION__, pipeName, strerror(errno));
+ close(fd);
+ return -1;
+}
+
+int qemu_pipe_frame_send(int fd, const void* buff, size_t len) {
+ char header[5];
+ snprintf(header, sizeof(header), "%04zx", len);
+ if (!WriteFully(fd, header, 4)) {
+ QEMU_PIPE_DEBUG("Can't write qemud frame header: %s", strerror(errno));
+ return -1;
+ }
+ if (!WriteFully(fd, buff, len)) {
+ QEMU_PIPE_DEBUG("Can't write qemud frame payload: %s", strerror(errno));
+ return -1;
+ }
+ return 0;
+}
+
+int qemu_pipe_frame_recv(int fd, void* buff, size_t len) {
+ char header[5];
+ if (!ReadFully(fd, header, 4)) {
+ QEMU_PIPE_DEBUG("Can't read qemud frame header: %s", strerror(errno));
+ return -1;
+ }
+ header[4] = '\0';
+ size_t size;
+ if (sscanf(header, "%04zx", &size) != 1) {
+ QEMU_PIPE_DEBUG("Malformed qemud frame header: [%.*s]", 4, header);
+ return -1;
+ }
+ if (size > len) {
+ QEMU_PIPE_DEBUG("Oversized qemud frame (% bytes, expected <= %)", size,
+ len);
+ return -1;
+ }
+ if (!ReadFully(fd, buff, size)) {
+ QEMU_PIPE_DEBUG("Could not read qemud frame payload: %s",
+ strerror(errno));
+ return -1;
+ }
+ return size;
+}
diff --git a/rootdir/Android.mk b/rootdir/Android.mk
index 48a46c6..2e5575f 100644
--- a/rootdir/Android.mk
+++ b/rootdir/Android.mk
@@ -101,6 +101,21 @@
$(foreach binary, $(SANITIZE_ASAN_OPTIONS_FOR), $(eval $(call create-asan-options-module,$(binary))))
endif
+# ASAN extration.
+ASAN_EXTRACT_FILES :=
+ifeq ($(SANITIZE_TARGET_SYSTEM),true)
+include $(CLEAR_VARS)
+LOCAL_MODULE:= asan_extract
+LOCAL_MODULE_TAGS := optional
+LOCAL_MODULE_CLASS := EXECUTABLES
+LOCAL_SRC_FILES := asan_extract.sh
+LOCAL_INIT_RC := asan_extract.rc
+# We need bzip2 on device for extraction.
+LOCAL_REQUIRED_MODULES := bzip2
+include $(BUILD_PREBUILT)
+ASAN_EXTRACT_FILES := asan_extract
+endif
+
endif
#######################################
@@ -114,7 +129,7 @@
EXPORT_GLOBAL_ASAN_OPTIONS :=
ifneq ($(filter address,$(SANITIZE_TARGET)),)
EXPORT_GLOBAL_ASAN_OPTIONS := export ASAN_OPTIONS include=/system/asan.options
- LOCAL_REQUIRED_MODULES := asan.options $(ASAN_OPTIONS_FILES)
+ LOCAL_REQUIRED_MODULES := asan.options $(ASAN_OPTIONS_FILES) $(ASAN_EXTRACT_FILES)
endif
EXPORT_GLOBAL_GCOV_OPTIONS :=
diff --git a/rootdir/asan_extract.rc b/rootdir/asan_extract.rc
new file mode 100644
index 0000000..4aea6a3
--- /dev/null
+++ b/rootdir/asan_extract.rc
@@ -0,0 +1,3 @@
+# When /data is available, look for /system/asan.tar.gz and potentially extract.
+on post-fs-data
+ exec - system system -- /system/bin/asan_extract
diff --git a/rootdir/asan_extract.sh b/rootdir/asan_extract.sh
new file mode 100644
index 0000000..2d72320
--- /dev/null
+++ b/rootdir/asan_extract.sh
@@ -0,0 +1,95 @@
+#!/system/bin/sh
+
+#
+# Copyright (C) 2017 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script will extract ASAN libraries from /system/asan.tar.gz to /data and then reboot.
+
+# TODO:
+# * Timestamp or something to know when to run this again. Right now take the existence of
+# /data/lib as we're already done.
+# * Need to distinguish pre- from post-decryption for FDE.
+
+SRC=/system/asan.tar.bz2
+MD5_FILE=/data/asan.md5sum
+ASAN_DIR=/data/asan
+# Minimum /data size in blocks. Arbitrarily 512M.
+MIN_DATA_SIZE=131072
+
+# Checks for FDE pre-decrypt state.
+
+VOLD_STATUS=$(getprop vold.decrypt)
+if [ "$VOLD_STATUS" = "trigger_restart_min_framework" ] ; then
+ log -p i -t asan_install "Pre-decrypt FDE detected (by vold property)!"
+ exit 1
+fi
+
+STATFS_BLOCKS=$(stat -f -c '%b' /data)
+if [ "$STATFS_BLOCKS" -le "$MIN_DATA_SIZE" ] ; then
+ log -p i -t asan_install "Pre-decrypt FDE detected (by /data size)!"
+ exit 1
+fi
+
+# Check for ASAN source.
+
+if ! test -f $SRC ; then
+ log -p i -t asan_install "Did not find $SRC!"
+ exit 1
+fi
+
+log -p i -t asan_install "Found $SRC, checking whether we need to apply it."
+
+# Checksum check.
+
+ASAN_TAR_MD5=$(md5sum $SRC)
+if test -f $MD5_FILE ; then
+ INSTALLED_MD5=$(cat $MD5_FILE)
+ if [ "x$ASAN_TAR_MD5" = "x$INSTALLED_MD5" ] ; then
+ log -p i -t asan_install "Checksums match, nothing to be done here."
+ exit 0
+ fi
+fi
+
+# Actually apply the source.
+
+# Just clean up, helps with restorecon.
+rm -rf $ASAN_DIR
+
+log -p i -t asan_install "Untarring $SRC..."
+
+# Unzip from /system/asan.tar.gz into data. Need to pipe as gunzip is not on device.
+bzip2 -c -d $SRC | tar -x -f - --no-same-owner -C / || exit 1
+
+# Cannot log here, log would run with system_data_file.
+
+# Set correct permission bits.
+chmod -R 744 $ASAN_DIR
+cd $ASAN_DIR ; find . -type d -exec chmod 755 {} \;
+
+restorecon -R -F $ASAN_DIR/*/lib*
+
+log -p i -t asan_install "Fixed selinux labels..."
+
+
+# Now write down our checksum to mark the extraction complete.
+echo "$ASAN_TAR_MD5" > $MD5_FILE
+
+# We want to reboot now. It seems it is not possible to run "reboot" here, the device will
+# just be stuck.
+
+log -p i -t asan_install "Signaling init to reboot..."
+
+setprop sys.powerctl reboot
diff --git a/rootdir/init.rc b/rootdir/init.rc
index 944aae7..a224d5e 100644
--- a/rootdir/init.rc
+++ b/rootdir/init.rc
@@ -52,18 +52,22 @@
mkdir /dev/stune/foreground
mkdir /dev/stune/background
mkdir /dev/stune/top-app
+ mkdir /dev/stune/rt
chown system system /dev/stune
chown system system /dev/stune/foreground
chown system system /dev/stune/background
chown system system /dev/stune/top-app
+ chown system system /dev/stune/rt
chown system system /dev/stune/tasks
chown system system /dev/stune/foreground/tasks
chown system system /dev/stune/background/tasks
chown system system /dev/stune/top-app/tasks
+ chown system system /dev/stune/rt/tasks
chmod 0664 /dev/stune/tasks
chmod 0664 /dev/stune/foreground/tasks
chmod 0664 /dev/stune/background/tasks
chmod 0664 /dev/stune/top-app/tasks
+ chmod 0664 /dev/stune/rt/tasks
# Mount staging areas for devices managed by vold
# See storage config details at http://source.android.com/tech/storage/
diff --git a/trusty/keymaster/Android.bp b/trusty/keymaster/Android.bp
index 3b6867c..6b9d723 100644
--- a/trusty/keymaster/Android.bp
+++ b/trusty/keymaster/Android.bp
@@ -33,7 +33,8 @@
shared_libs: [
"libcrypto",
"libcutils",
- "libkeymaster1",
+ "libkeymaster_portable",
+ "libkeymaster_staging",
"libtrusty",
"libkeymaster_messages",
"libsoftkeymasterdevice",