| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include <fcntl.h> |
| #include <ctype.h> |
| #include <signal.h> |
| #include <sys/wait.h> |
| #include <sys/mount.h> |
| #include <sys/stat.h> |
| #include <sys/poll.h> |
| #include <errno.h> |
| #include <stdarg.h> |
| #include <mtd/mtd-user.h> |
| #include <sys/types.h> |
| #include <sys/socket.h> |
| #include <sys/un.h> |
| |
| #include <selinux/selinux.h> |
| #include <selinux/label.h> |
| #include <selinux/android.h> |
| |
| #include <libgen.h> |
| |
| #include <cutils/list.h> |
| #include <cutils/android_reboot.h> |
| #include <cutils/sockets.h> |
| #include <cutils/iosched_policy.h> |
| #include <cutils/fs.h> |
| #include <private/android_filesystem_config.h> |
| #include <termios.h> |
| |
| #include <sys/system_properties.h> |
| |
| #include "devices.h" |
| #include "init.h" |
| #include "log.h" |
| #include "property_service.h" |
| #include "bootchart.h" |
| #include "signal_handler.h" |
| #include "keychords.h" |
| #include "init_parser.h" |
| #include "util.h" |
| #include "ueventd.h" |
| #include "watchdogd.h" |
| |
| struct selabel_handle *sehandle; |
| struct selabel_handle *sehandle_prop; |
| |
| static int property_triggers_enabled = 0; |
| |
| #if BOOTCHART |
| static int bootchart_count; |
| #endif |
| |
| static char console[32]; |
| static char bootmode[32]; |
| static char hardware[32]; |
| static unsigned revision = 0; |
| static char qemu[32]; |
| |
| static struct action *cur_action = NULL; |
| static struct command *cur_command = NULL; |
| static struct listnode *command_queue = NULL; |
| |
| void notify_service_state(const char *name, const char *state) |
| { |
| char pname[PROP_NAME_MAX]; |
| int len = strlen(name); |
| if ((len + 10) > PROP_NAME_MAX) |
| return; |
| snprintf(pname, sizeof(pname), "init.svc.%s", name); |
| property_set(pname, state); |
| } |
| |
| static int have_console; |
| static char console_name[PROP_VALUE_MAX] = "/dev/console"; |
| static time_t process_needs_restart; |
| |
| static const char *ENV[32]; |
| |
| /* add_environment - add "key=value" to the current environment */ |
| int add_environment(const char *key, const char *val) |
| { |
| int n; |
| |
| for (n = 0; n < 31; n++) { |
| if (!ENV[n]) { |
| size_t len = strlen(key) + strlen(val) + 2; |
| char *entry = malloc(len); |
| snprintf(entry, len, "%s=%s", key, val); |
| ENV[n] = entry; |
| return 0; |
| } |
| } |
| |
| return 1; |
| } |
| |
| static void zap_stdio(void) |
| { |
| int fd; |
| fd = open("/dev/null", O_RDWR); |
| dup2(fd, 0); |
| dup2(fd, 1); |
| dup2(fd, 2); |
| close(fd); |
| } |
| |
| static void open_console() |
| { |
| int fd; |
| if ((fd = open(console_name, O_RDWR)) < 0) { |
| fd = open("/dev/null", O_RDWR); |
| } |
| ioctl(fd, TIOCSCTTY, 0); |
| dup2(fd, 0); |
| dup2(fd, 1); |
| dup2(fd, 2); |
| close(fd); |
| } |
| |
| static void publish_socket(const char *name, int fd) |
| { |
| char key[64] = ANDROID_SOCKET_ENV_PREFIX; |
| char val[64]; |
| |
| strlcpy(key + sizeof(ANDROID_SOCKET_ENV_PREFIX) - 1, |
| name, |
| sizeof(key) - sizeof(ANDROID_SOCKET_ENV_PREFIX)); |
| snprintf(val, sizeof(val), "%d", fd); |
| add_environment(key, val); |
| |
| /* make sure we don't close-on-exec */ |
| fcntl(fd, F_SETFD, 0); |
| } |
| |
| void service_start(struct service *svc, const char *dynamic_args) |
| { |
| struct stat s; |
| pid_t pid; |
| int needs_console; |
| int n; |
| char *scon = NULL; |
| int rc; |
| |
| /* starting a service removes it from the disabled or reset |
| * state and immediately takes it out of the restarting |
| * state if it was in there |
| */ |
| svc->flags &= (~(SVC_DISABLED|SVC_RESTARTING|SVC_RESET|SVC_RESTART)); |
| svc->time_started = 0; |
| |
| /* running processes require no additional work -- if |
| * they're in the process of exiting, we've ensured |
| * that they will immediately restart on exit, unless |
| * they are ONESHOT |
| */ |
| if (svc->flags & SVC_RUNNING) { |
| return; |
| } |
| |
| needs_console = (svc->flags & SVC_CONSOLE) ? 1 : 0; |
| if (needs_console && (!have_console)) { |
| ERROR("service '%s' requires console\n", svc->name); |
| svc->flags |= SVC_DISABLED; |
| return; |
| } |
| |
| if (stat(svc->args[0], &s) != 0) { |
| ERROR("cannot find '%s', disabling '%s'\n", svc->args[0], svc->name); |
| svc->flags |= SVC_DISABLED; |
| return; |
| } |
| |
| if ((!(svc->flags & SVC_ONESHOT)) && dynamic_args) { |
| ERROR("service '%s' must be one-shot to use dynamic args, disabling\n", |
| svc->args[0]); |
| svc->flags |= SVC_DISABLED; |
| return; |
| } |
| |
| if (is_selinux_enabled() > 0) { |
| if (svc->seclabel) { |
| scon = strdup(svc->seclabel); |
| if (!scon) { |
| ERROR("Out of memory while starting '%s'\n", svc->name); |
| return; |
| } |
| } else { |
| char *mycon = NULL, *fcon = NULL; |
| |
| INFO("computing context for service '%s'\n", svc->args[0]); |
| rc = getcon(&mycon); |
| if (rc < 0) { |
| ERROR("could not get context while starting '%s'\n", svc->name); |
| return; |
| } |
| |
| rc = getfilecon(svc->args[0], &fcon); |
| if (rc < 0) { |
| ERROR("could not get context while starting '%s'\n", svc->name); |
| freecon(mycon); |
| return; |
| } |
| |
| rc = security_compute_create(mycon, fcon, string_to_security_class("process"), &scon); |
| if (rc == 0 && !strcmp(scon, mycon)) { |
| ERROR("Warning! Service %s needs a SELinux domain defined; please fix!\n", svc->name); |
| } |
| freecon(mycon); |
| freecon(fcon); |
| if (rc < 0) { |
| ERROR("could not get context while starting '%s'\n", svc->name); |
| return; |
| } |
| } |
| } |
| |
| NOTICE("starting '%s'\n", svc->name); |
| |
| pid = fork(); |
| |
| if (pid == 0) { |
| struct socketinfo *si; |
| struct svcenvinfo *ei; |
| char tmp[32]; |
| int fd, sz; |
| |
| umask(077); |
| if (properties_inited()) { |
| get_property_workspace(&fd, &sz); |
| sprintf(tmp, "%d,%d", dup(fd), sz); |
| add_environment("ANDROID_PROPERTY_WORKSPACE", tmp); |
| } |
| |
| for (ei = svc->envvars; ei; ei = ei->next) |
| add_environment(ei->name, ei->value); |
| |
| for (si = svc->sockets; si; si = si->next) { |
| int socket_type = ( |
| !strcmp(si->type, "stream") ? SOCK_STREAM : |
| (!strcmp(si->type, "dgram") ? SOCK_DGRAM : SOCK_SEQPACKET)); |
| int s = create_socket(si->name, socket_type, |
| si->perm, si->uid, si->gid, si->socketcon ?: scon); |
| if (s >= 0) { |
| publish_socket(si->name, s); |
| } |
| } |
| |
| freecon(scon); |
| scon = NULL; |
| |
| if (svc->ioprio_class != IoSchedClass_NONE) { |
| if (android_set_ioprio(getpid(), svc->ioprio_class, svc->ioprio_pri)) { |
| ERROR("Failed to set pid %d ioprio = %d,%d: %s\n", |
| getpid(), svc->ioprio_class, svc->ioprio_pri, strerror(errno)); |
| } |
| } |
| |
| if (needs_console) { |
| setsid(); |
| open_console(); |
| } else { |
| zap_stdio(); |
| } |
| |
| #if 0 |
| for (n = 0; svc->args[n]; n++) { |
| INFO("args[%d] = '%s'\n", n, svc->args[n]); |
| } |
| for (n = 0; ENV[n]; n++) { |
| INFO("env[%d] = '%s'\n", n, ENV[n]); |
| } |
| #endif |
| |
| setpgid(0, getpid()); |
| |
| /* as requested, set our gid, supplemental gids, and uid */ |
| if (svc->gid) { |
| if (setgid(svc->gid) != 0) { |
| ERROR("setgid failed: %s\n", strerror(errno)); |
| _exit(127); |
| } |
| } |
| if (svc->nr_supp_gids) { |
| if (setgroups(svc->nr_supp_gids, svc->supp_gids) != 0) { |
| ERROR("setgroups failed: %s\n", strerror(errno)); |
| _exit(127); |
| } |
| } |
| if (svc->uid) { |
| if (setuid(svc->uid) != 0) { |
| ERROR("setuid failed: %s\n", strerror(errno)); |
| _exit(127); |
| } |
| } |
| if (svc->seclabel) { |
| if (is_selinux_enabled() > 0 && setexeccon(svc->seclabel) < 0) { |
| ERROR("cannot setexeccon('%s'): %s\n", svc->seclabel, strerror(errno)); |
| _exit(127); |
| } |
| } |
| |
| if (!dynamic_args) { |
| if (execve(svc->args[0], (char**) svc->args, (char**) ENV) < 0) { |
| ERROR("cannot execve('%s'): %s\n", svc->args[0], strerror(errno)); |
| } |
| } else { |
| char *arg_ptrs[INIT_PARSER_MAXARGS+1]; |
| int arg_idx = svc->nargs; |
| char *tmp = strdup(dynamic_args); |
| char *next = tmp; |
| char *bword; |
| |
| /* Copy the static arguments */ |
| memcpy(arg_ptrs, svc->args, (svc->nargs * sizeof(char *))); |
| |
| while((bword = strsep(&next, " "))) { |
| arg_ptrs[arg_idx++] = bword; |
| if (arg_idx == INIT_PARSER_MAXARGS) |
| break; |
| } |
| arg_ptrs[arg_idx] = '\0'; |
| execve(svc->args[0], (char**) arg_ptrs, (char**) ENV); |
| } |
| _exit(127); |
| } |
| |
| freecon(scon); |
| |
| if (pid < 0) { |
| ERROR("failed to start '%s'\n", svc->name); |
| svc->pid = 0; |
| return; |
| } |
| |
| svc->time_started = gettime(); |
| svc->pid = pid; |
| svc->flags |= SVC_RUNNING; |
| |
| if (properties_inited()) |
| notify_service_state(svc->name, "running"); |
| } |
| |
| /* The how field should be either SVC_DISABLED, SVC_RESET, or SVC_RESTART */ |
| static void service_stop_or_reset(struct service *svc, int how) |
| { |
| /* The service is still SVC_RUNNING until its process exits, but if it has |
| * already exited it shoudn't attempt a restart yet. */ |
| svc->flags &= (~SVC_RESTARTING); |
| |
| if ((how != SVC_DISABLED) && (how != SVC_RESET) && (how != SVC_RESTART)) { |
| /* Hrm, an illegal flag. Default to SVC_DISABLED */ |
| how = SVC_DISABLED; |
| } |
| /* if the service has not yet started, prevent |
| * it from auto-starting with its class |
| */ |
| if (how == SVC_RESET) { |
| svc->flags |= (svc->flags & SVC_RC_DISABLED) ? SVC_DISABLED : SVC_RESET; |
| } else { |
| svc->flags |= how; |
| } |
| |
| if (svc->pid) { |
| NOTICE("service '%s' is being killed\n", svc->name); |
| kill(-svc->pid, SIGKILL); |
| notify_service_state(svc->name, "stopping"); |
| } else { |
| notify_service_state(svc->name, "stopped"); |
| } |
| } |
| |
| void service_reset(struct service *svc) |
| { |
| service_stop_or_reset(svc, SVC_RESET); |
| } |
| |
| void service_stop(struct service *svc) |
| { |
| service_stop_or_reset(svc, SVC_DISABLED); |
| } |
| |
| void service_restart(struct service *svc) |
| { |
| if (svc->flags & SVC_RUNNING) { |
| /* Stop, wait, then start the service. */ |
| service_stop_or_reset(svc, SVC_RESTART); |
| } else if (!(svc->flags & SVC_RESTARTING)) { |
| /* Just start the service since it's not running. */ |
| service_start(svc, NULL); |
| } /* else: Service is restarting anyways. */ |
| } |
| |
| void property_changed(const char *name, const char *value) |
| { |
| if (property_triggers_enabled) |
| queue_property_triggers(name, value); |
| } |
| |
| static void restart_service_if_needed(struct service *svc) |
| { |
| time_t next_start_time = svc->time_started + 5; |
| |
| if (next_start_time <= gettime()) { |
| svc->flags &= (~SVC_RESTARTING); |
| service_start(svc, NULL); |
| return; |
| } |
| |
| if ((next_start_time < process_needs_restart) || |
| (process_needs_restart == 0)) { |
| process_needs_restart = next_start_time; |
| } |
| } |
| |
| static void restart_processes() |
| { |
| process_needs_restart = 0; |
| service_for_each_flags(SVC_RESTARTING, |
| restart_service_if_needed); |
| } |
| |
| static void msg_start(const char *name) |
| { |
| struct service *svc = NULL; |
| char *tmp = NULL; |
| char *args = NULL; |
| |
| if (!strchr(name, ':')) |
| svc = service_find_by_name(name); |
| else { |
| tmp = strdup(name); |
| if (tmp) { |
| args = strchr(tmp, ':'); |
| *args = '\0'; |
| args++; |
| |
| svc = service_find_by_name(tmp); |
| } |
| } |
| |
| if (svc) { |
| service_start(svc, args); |
| } else { |
| ERROR("no such service '%s'\n", name); |
| } |
| if (tmp) |
| free(tmp); |
| } |
| |
| static void msg_stop(const char *name) |
| { |
| struct service *svc = service_find_by_name(name); |
| |
| if (svc) { |
| service_stop(svc); |
| } else { |
| ERROR("no such service '%s'\n", name); |
| } |
| } |
| |
| static void msg_restart(const char *name) |
| { |
| struct service *svc = service_find_by_name(name); |
| |
| if (svc) { |
| service_restart(svc); |
| } else { |
| ERROR("no such service '%s'\n", name); |
| } |
| } |
| |
| void handle_control_message(const char *msg, const char *arg) |
| { |
| if (!strcmp(msg,"start")) { |
| msg_start(arg); |
| } else if (!strcmp(msg,"stop")) { |
| msg_stop(arg); |
| } else if (!strcmp(msg,"restart")) { |
| msg_restart(arg); |
| } else { |
| ERROR("unknown control msg '%s'\n", msg); |
| } |
| } |
| |
| static struct command *get_first_command(struct action *act) |
| { |
| struct listnode *node; |
| node = list_head(&act->commands); |
| if (!node || list_empty(&act->commands)) |
| return NULL; |
| |
| return node_to_item(node, struct command, clist); |
| } |
| |
| static struct command *get_next_command(struct action *act, struct command *cmd) |
| { |
| struct listnode *node; |
| node = cmd->clist.next; |
| if (!node) |
| return NULL; |
| if (node == &act->commands) |
| return NULL; |
| |
| return node_to_item(node, struct command, clist); |
| } |
| |
| static int is_last_command(struct action *act, struct command *cmd) |
| { |
| return (list_tail(&act->commands) == &cmd->clist); |
| } |
| |
| void execute_one_command(void) |
| { |
| int ret; |
| |
| if (!cur_action || !cur_command || is_last_command(cur_action, cur_command)) { |
| cur_action = action_remove_queue_head(); |
| cur_command = NULL; |
| if (!cur_action) |
| return; |
| INFO("processing action %p (%s)\n", cur_action, cur_action->name); |
| cur_command = get_first_command(cur_action); |
| } else { |
| cur_command = get_next_command(cur_action, cur_command); |
| } |
| |
| if (!cur_command) |
| return; |
| |
| ret = cur_command->func(cur_command->nargs, cur_command->args); |
| INFO("command '%s' r=%d\n", cur_command->args[0], ret); |
| } |
| |
| static int wait_for_coldboot_done_action(int nargs, char **args) |
| { |
| int ret; |
| INFO("wait for %s\n", coldboot_done); |
| ret = wait_for_file(coldboot_done, COMMAND_RETRY_TIMEOUT); |
| if (ret) |
| ERROR("Timed out waiting for %s\n", coldboot_done); |
| return ret; |
| } |
| |
| /* |
| * Writes 512 bytes of output from Hardware RNG (/dev/hw_random, backed |
| * by Linux kernel's hw_random framework) into Linux RNG's via /dev/urandom. |
| * Does nothing if Hardware RNG is not present. |
| * |
| * Since we don't yet trust the quality of Hardware RNG, these bytes are not |
| * mixed into the primary pool of Linux RNG and the entropy estimate is left |
| * unmodified. |
| * |
| * If the HW RNG device /dev/hw_random is present, we require that at least |
| * 512 bytes read from it are written into Linux RNG. QA is expected to catch |
| * devices/configurations where these I/O operations are blocking for a long |
| * time. We do not reboot or halt on failures, as this is a best-effort |
| * attempt. |
| */ |
| static int mix_hwrng_into_linux_rng_action(int nargs, char **args) |
| { |
| int result = -1; |
| int hwrandom_fd = -1; |
| int urandom_fd = -1; |
| char buf[512]; |
| ssize_t chunk_size; |
| size_t total_bytes_written = 0; |
| |
| hwrandom_fd = TEMP_FAILURE_RETRY( |
| open("/dev/hw_random", O_RDONLY | O_NOFOLLOW)); |
| if (hwrandom_fd == -1) { |
| if (errno == ENOENT) { |
| ERROR("/dev/hw_random not found\n"); |
| /* It's not an error to not have a Hardware RNG. */ |
| result = 0; |
| } else { |
| ERROR("Failed to open /dev/hw_random: %s\n", strerror(errno)); |
| } |
| goto ret; |
| } |
| |
| urandom_fd = TEMP_FAILURE_RETRY( |
| open("/dev/urandom", O_WRONLY | O_NOFOLLOW)); |
| if (urandom_fd == -1) { |
| ERROR("Failed to open /dev/urandom: %s\n", strerror(errno)); |
| goto ret; |
| } |
| |
| while (total_bytes_written < sizeof(buf)) { |
| chunk_size = TEMP_FAILURE_RETRY( |
| read(hwrandom_fd, buf, sizeof(buf) - total_bytes_written)); |
| if (chunk_size == -1) { |
| ERROR("Failed to read from /dev/hw_random: %s\n", strerror(errno)); |
| goto ret; |
| } else if (chunk_size == 0) { |
| ERROR("Failed to read from /dev/hw_random: EOF\n"); |
| goto ret; |
| } |
| |
| chunk_size = TEMP_FAILURE_RETRY(write(urandom_fd, buf, chunk_size)); |
| if (chunk_size == -1) { |
| ERROR("Failed to write to /dev/urandom: %s\n", strerror(errno)); |
| goto ret; |
| } |
| total_bytes_written += chunk_size; |
| } |
| |
| INFO("Mixed %d bytes from /dev/hw_random into /dev/urandom", |
| total_bytes_written); |
| result = 0; |
| |
| ret: |
| if (hwrandom_fd != -1) { |
| close(hwrandom_fd); |
| } |
| if (urandom_fd != -1) { |
| close(urandom_fd); |
| } |
| memset(buf, 0, sizeof(buf)); |
| return result; |
| } |
| |
| static int keychord_init_action(int nargs, char **args) |
| { |
| keychord_init(); |
| return 0; |
| } |
| |
| static int console_init_action(int nargs, char **args) |
| { |
| int fd; |
| |
| if (console[0]) { |
| snprintf(console_name, sizeof(console_name), "/dev/%s", console); |
| } |
| |
| fd = open(console_name, O_RDWR); |
| if (fd >= 0) |
| have_console = 1; |
| close(fd); |
| |
| fd = open("/dev/tty0", O_WRONLY); |
| if (fd >= 0) { |
| const char *msg; |
| msg = "\n" |
| "\n" |
| "\n" |
| "\n" |
| "\n" |
| "\n" |
| "\n" // console is 40 cols x 30 lines |
| "\n" |
| "\n" |
| "\n" |
| "\n" |
| "\n" |
| "\n" |
| "\n" |
| " A N D R O I D "; |
| write(fd, msg, strlen(msg)); |
| close(fd); |
| } |
| |
| return 0; |
| } |
| |
| static void import_kernel_nv(char *name, int for_emulator) |
| { |
| char *value = strchr(name, '='); |
| int name_len = strlen(name); |
| |
| if (value == 0) return; |
| *value++ = 0; |
| if (name_len == 0) return; |
| |
| if (for_emulator) { |
| /* in the emulator, export any kernel option with the |
| * ro.kernel. prefix */ |
| char buff[PROP_NAME_MAX]; |
| int len = snprintf( buff, sizeof(buff), "ro.kernel.%s", name ); |
| |
| if (len < (int)sizeof(buff)) |
| property_set( buff, value ); |
| return; |
| } |
| |
| if (!strcmp(name,"qemu")) { |
| strlcpy(qemu, value, sizeof(qemu)); |
| } else if (!strncmp(name, "androidboot.", 12) && name_len > 12) { |
| const char *boot_prop_name = name + 12; |
| char prop[PROP_NAME_MAX]; |
| int cnt; |
| |
| cnt = snprintf(prop, sizeof(prop), "ro.boot.%s", boot_prop_name); |
| if (cnt < PROP_NAME_MAX) |
| property_set(prop, value); |
| } |
| } |
| |
| static void export_kernel_boot_props(void) |
| { |
| char tmp[PROP_VALUE_MAX]; |
| int ret; |
| unsigned i; |
| struct { |
| const char *src_prop; |
| const char *dest_prop; |
| const char *def_val; |
| } prop_map[] = { |
| { "ro.boot.serialno", "ro.serialno", "", }, |
| { "ro.boot.mode", "ro.bootmode", "unknown", }, |
| { "ro.boot.baseband", "ro.baseband", "unknown", }, |
| { "ro.boot.bootloader", "ro.bootloader", "unknown", }, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(prop_map); i++) { |
| ret = property_get(prop_map[i].src_prop, tmp); |
| if (ret > 0) |
| property_set(prop_map[i].dest_prop, tmp); |
| else |
| property_set(prop_map[i].dest_prop, prop_map[i].def_val); |
| } |
| |
| ret = property_get("ro.boot.console", tmp); |
| if (ret) |
| strlcpy(console, tmp, sizeof(console)); |
| |
| /* save a copy for init's usage during boot */ |
| property_get("ro.bootmode", tmp); |
| strlcpy(bootmode, tmp, sizeof(bootmode)); |
| |
| /* if this was given on kernel command line, override what we read |
| * before (e.g. from /proc/cpuinfo), if anything */ |
| ret = property_get("ro.boot.hardware", tmp); |
| if (ret) |
| strlcpy(hardware, tmp, sizeof(hardware)); |
| property_set("ro.hardware", hardware); |
| |
| snprintf(tmp, PROP_VALUE_MAX, "%d", revision); |
| property_set("ro.revision", tmp); |
| |
| /* TODO: these are obsolete. We should delete them */ |
| if (!strcmp(bootmode,"factory")) |
| property_set("ro.factorytest", "1"); |
| else if (!strcmp(bootmode,"factory2")) |
| property_set("ro.factorytest", "2"); |
| else |
| property_set("ro.factorytest", "0"); |
| } |
| |
| static void process_kernel_cmdline(void) |
| { |
| /* don't expose the raw commandline to nonpriv processes */ |
| chmod("/proc/cmdline", 0440); |
| |
| /* first pass does the common stuff, and finds if we are in qemu. |
| * second pass is only necessary for qemu to export all kernel params |
| * as props. |
| */ |
| import_kernel_cmdline(0, import_kernel_nv); |
| if (qemu[0]) |
| import_kernel_cmdline(1, import_kernel_nv); |
| |
| /* now propogate the info given on command line to internal variables |
| * used by init as well as the current required properties |
| */ |
| export_kernel_boot_props(); |
| } |
| |
| static int property_service_init_action(int nargs, char **args) |
| { |
| /* read any property files on system or data and |
| * fire up the property service. This must happen |
| * after the ro.foo properties are set above so |
| * that /data/local.prop cannot interfere with them. |
| */ |
| start_property_service(); |
| return 0; |
| } |
| |
| static int signal_init_action(int nargs, char **args) |
| { |
| signal_init(); |
| return 0; |
| } |
| |
| static int check_startup_action(int nargs, char **args) |
| { |
| /* make sure we actually have all the pieces we need */ |
| if ((get_property_set_fd() < 0) || |
| (get_signal_fd() < 0)) { |
| ERROR("init startup failure\n"); |
| exit(1); |
| } |
| |
| /* signal that we hit this point */ |
| unlink("/dev/.booting"); |
| |
| return 0; |
| } |
| |
| static int queue_property_triggers_action(int nargs, char **args) |
| { |
| queue_all_property_triggers(); |
| /* enable property triggers */ |
| property_triggers_enabled = 1; |
| return 0; |
| } |
| |
| #if BOOTCHART |
| static int bootchart_init_action(int nargs, char **args) |
| { |
| bootchart_count = bootchart_init(); |
| if (bootchart_count < 0) { |
| ERROR("bootcharting init failure\n"); |
| } else if (bootchart_count > 0) { |
| NOTICE("bootcharting started (period=%d ms)\n", bootchart_count*BOOTCHART_POLLING_MS); |
| } else { |
| NOTICE("bootcharting ignored\n"); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct selinux_opt seopts_prop[] = { |
| { SELABEL_OPT_PATH, "/data/security/property_contexts" }, |
| { SELABEL_OPT_PATH, "/property_contexts" }, |
| { 0, NULL } |
| }; |
| |
| struct selabel_handle* selinux_android_prop_context_handle(void) |
| { |
| int i = 0; |
| struct selabel_handle* sehandle = NULL; |
| while ((sehandle == NULL) && seopts_prop[i].value) { |
| sehandle = selabel_open(SELABEL_CTX_ANDROID_PROP, &seopts_prop[i], 1); |
| i++; |
| } |
| |
| if (!sehandle) { |
| ERROR("SELinux: Could not load property_contexts: %s\n", |
| strerror(errno)); |
| return NULL; |
| } |
| INFO("SELinux: Loaded property contexts from %s\n", seopts_prop[i - 1].value); |
| return sehandle; |
| } |
| |
| void selinux_init_all_handles(void) |
| { |
| sehandle = selinux_android_file_context_handle(); |
| sehandle_prop = selinux_android_prop_context_handle(); |
| } |
| |
| static bool selinux_is_disabled(void) |
| { |
| char tmp[PROP_VALUE_MAX]; |
| |
| if (access("/sys/fs/selinux", F_OK) != 0) { |
| /* SELinux is not compiled into the kernel, or has been disabled |
| * via the kernel command line "selinux=0". |
| */ |
| return true; |
| } |
| |
| if ((property_get("ro.boot.selinux", tmp) != 0) && (strcmp(tmp, "disabled") == 0)) { |
| /* SELinux is compiled into the kernel, but we've been told to disable it. */ |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static bool selinux_is_enforcing(void) |
| { |
| char tmp[PROP_VALUE_MAX]; |
| |
| if (property_get("ro.boot.selinux", tmp) == 0) { |
| /* Property is not set. Assume enforcing */ |
| return true; |
| } |
| |
| if (strcmp(tmp, "permissive") == 0) { |
| /* SELinux is in the kernel, but we've been told to go into permissive mode */ |
| return false; |
| } |
| |
| if (strcmp(tmp, "enforcing") != 0) { |
| ERROR("SELinux: Unknown value of ro.boot.selinux. Got: \"%s\". Assuming enforcing.\n", tmp); |
| } |
| |
| return true; |
| } |
| |
| int selinux_reload_policy(void) |
| { |
| if (selinux_is_disabled()) { |
| return -1; |
| } |
| |
| INFO("SELinux: Attempting to reload policy files\n"); |
| |
| if (selinux_android_reload_policy() == -1) { |
| return -1; |
| } |
| |
| if (sehandle) |
| selabel_close(sehandle); |
| |
| if (sehandle_prop) |
| selabel_close(sehandle_prop); |
| |
| selinux_init_all_handles(); |
| return 0; |
| } |
| |
| int audit_callback(void *data, security_class_t cls, char *buf, size_t len) |
| { |
| snprintf(buf, len, "property=%s", !data ? "NULL" : (char *)data); |
| return 0; |
| } |
| |
| static void selinux_initialize(void) |
| { |
| if (selinux_is_disabled()) { |
| return; |
| } |
| |
| INFO("loading selinux policy\n"); |
| if (selinux_android_load_policy() < 0) { |
| ERROR("SELinux: Failed to load policy; rebooting into recovery mode\n"); |
| android_reboot(ANDROID_RB_RESTART2, 0, "recovery"); |
| while (1) { pause(); } // never reached |
| } |
| |
| selinux_init_all_handles(); |
| bool is_enforcing = selinux_is_enforcing(); |
| INFO("SELinux: security_setenforce(%d)\n", is_enforcing); |
| security_setenforce(is_enforcing); |
| } |
| |
| int main(int argc, char **argv) |
| { |
| int fd_count = 0; |
| struct pollfd ufds[4]; |
| char *tmpdev; |
| char* debuggable; |
| char tmp[32]; |
| int property_set_fd_init = 0; |
| int signal_fd_init = 0; |
| int keychord_fd_init = 0; |
| bool is_charger = false; |
| |
| if (!strcmp(basename(argv[0]), "ueventd")) |
| return ueventd_main(argc, argv); |
| |
| if (!strcmp(basename(argv[0]), "watchdogd")) |
| return watchdogd_main(argc, argv); |
| |
| /* clear the umask */ |
| umask(0); |
| |
| /* Get the basic filesystem setup we need put |
| * together in the initramdisk on / and then we'll |
| * let the rc file figure out the rest. |
| */ |
| mkdir("/dev", 0755); |
| mkdir("/proc", 0755); |
| mkdir("/sys", 0755); |
| |
| mount("tmpfs", "/dev", "tmpfs", MS_NOSUID, "mode=0755"); |
| mkdir("/dev/pts", 0755); |
| mkdir("/dev/socket", 0755); |
| mount("devpts", "/dev/pts", "devpts", 0, NULL); |
| mount("proc", "/proc", "proc", 0, NULL); |
| mount("sysfs", "/sys", "sysfs", 0, NULL); |
| |
| /* indicate that booting is in progress to background fw loaders, etc */ |
| close(open("/dev/.booting", O_WRONLY | O_CREAT, 0000)); |
| |
| /* We must have some place other than / to create the |
| * device nodes for kmsg and null, otherwise we won't |
| * be able to remount / read-only later on. |
| * Now that tmpfs is mounted on /dev, we can actually |
| * talk to the outside world. |
| */ |
| open_devnull_stdio(); |
| klog_init(); |
| property_init(); |
| |
| get_hardware_name(hardware, &revision); |
| |
| process_kernel_cmdline(); |
| |
| union selinux_callback cb; |
| cb.func_log = klog_write; |
| selinux_set_callback(SELINUX_CB_LOG, cb); |
| |
| cb.func_audit = audit_callback; |
| selinux_set_callback(SELINUX_CB_AUDIT, cb); |
| |
| selinux_initialize(); |
| /* These directories were necessarily created before initial policy load |
| * and therefore need their security context restored to the proper value. |
| * This must happen before /dev is populated by ueventd. |
| */ |
| restorecon("/dev"); |
| restorecon("/dev/socket"); |
| restorecon("/dev/__properties__"); |
| restorecon_recursive("/sys"); |
| |
| is_charger = !strcmp(bootmode, "charger"); |
| |
| INFO("property init\n"); |
| if (!is_charger) |
| property_load_boot_defaults(); |
| |
| INFO("reading config file\n"); |
| init_parse_config_file("/init.rc"); |
| |
| action_for_each_trigger("early-init", action_add_queue_tail); |
| |
| queue_builtin_action(wait_for_coldboot_done_action, "wait_for_coldboot_done"); |
| queue_builtin_action(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng"); |
| queue_builtin_action(keychord_init_action, "keychord_init"); |
| queue_builtin_action(console_init_action, "console_init"); |
| |
| /* execute all the boot actions to get us started */ |
| action_for_each_trigger("init", action_add_queue_tail); |
| |
| /* skip mounting filesystems in charger mode */ |
| if (!is_charger) { |
| action_for_each_trigger("early-fs", action_add_queue_tail); |
| action_for_each_trigger("fs", action_add_queue_tail); |
| action_for_each_trigger("post-fs", action_add_queue_tail); |
| action_for_each_trigger("post-fs-data", action_add_queue_tail); |
| } |
| |
| /* Repeat mix_hwrng_into_linux_rng in case /dev/hw_random or /dev/random |
| * wasn't ready immediately after wait_for_coldboot_done |
| */ |
| queue_builtin_action(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng"); |
| |
| queue_builtin_action(property_service_init_action, "property_service_init"); |
| queue_builtin_action(signal_init_action, "signal_init"); |
| queue_builtin_action(check_startup_action, "check_startup"); |
| |
| if (is_charger) { |
| action_for_each_trigger("charger", action_add_queue_tail); |
| } else { |
| action_for_each_trigger("early-boot", action_add_queue_tail); |
| action_for_each_trigger("boot", action_add_queue_tail); |
| } |
| |
| /* run all property triggers based on current state of the properties */ |
| queue_builtin_action(queue_property_triggers_action, "queue_property_triggers"); |
| |
| |
| #if BOOTCHART |
| queue_builtin_action(bootchart_init_action, "bootchart_init"); |
| #endif |
| |
| for(;;) { |
| int nr, i, timeout = -1; |
| |
| execute_one_command(); |
| restart_processes(); |
| |
| if (!property_set_fd_init && get_property_set_fd() > 0) { |
| ufds[fd_count].fd = get_property_set_fd(); |
| ufds[fd_count].events = POLLIN; |
| ufds[fd_count].revents = 0; |
| fd_count++; |
| property_set_fd_init = 1; |
| } |
| if (!signal_fd_init && get_signal_fd() > 0) { |
| ufds[fd_count].fd = get_signal_fd(); |
| ufds[fd_count].events = POLLIN; |
| ufds[fd_count].revents = 0; |
| fd_count++; |
| signal_fd_init = 1; |
| } |
| if (!keychord_fd_init && get_keychord_fd() > 0) { |
| ufds[fd_count].fd = get_keychord_fd(); |
| ufds[fd_count].events = POLLIN; |
| ufds[fd_count].revents = 0; |
| fd_count++; |
| keychord_fd_init = 1; |
| } |
| |
| if (process_needs_restart) { |
| timeout = (process_needs_restart - gettime()) * 1000; |
| if (timeout < 0) |
| timeout = 0; |
| } |
| |
| if (!action_queue_empty() || cur_action) |
| timeout = 0; |
| |
| #if BOOTCHART |
| if (bootchart_count > 0) { |
| if (timeout < 0 || timeout > BOOTCHART_POLLING_MS) |
| timeout = BOOTCHART_POLLING_MS; |
| if (bootchart_step() < 0 || --bootchart_count == 0) { |
| bootchart_finish(); |
| bootchart_count = 0; |
| } |
| } |
| #endif |
| |
| nr = poll(ufds, fd_count, timeout); |
| if (nr <= 0) |
| continue; |
| |
| for (i = 0; i < fd_count; i++) { |
| if (ufds[i].revents & POLLIN) { |
| if (ufds[i].fd == get_property_set_fd()) |
| handle_property_set_fd(); |
| else if (ufds[i].fd == get_keychord_fd()) |
| handle_keychord(); |
| else if (ufds[i].fd == get_signal_fd()) |
| handle_signal(); |
| } |
| } |
| } |
| |
| return 0; |
| } |